3 #######################
\r
5 #######################
\r
7 A base of 28 test cases guarantees the correct functioning of « Bloc Fissure ». 12 cases are dedicated to :ref:`cracked bended pipes <pipeTC>` and the others 16 are for other :ref:`generic geometries <genericTC>`. They are shown here in order to illustrate cases on which « Bloc Fissure » works.
\r
12 ===============================
\r
14 All 16 cases are shown Table 2. Two views show the whole cracked structure and a zoom onto the crack with its tore.
\r
16 +--------------------------------------------+-----------------------------------------------+
\r
18 +--------------------------------------------+-----------------------------------------------+
\r
19 |.. image:: images/01_CubeAngle.png | .. image:: images/01_CubeAngle_a.png |
\r
20 | :height: 300 | :height: 300 |
\r
21 | :align: center | :align: center |
\r
22 +--------------------------------------------+-----------------------------------------------+
\r
24 +--------------------------------------------+-----------------------------------------------+
\r
25 |.. image:: images/02_CubeAngle_2.png | .. image:: images/02_CubeAngle_2_a.png |
\r
26 | :height: 300 | :height: 300 |
\r
27 | :align: center | :align: center |
\r
28 +--------------------------------------------+-----------------------------------------------+
\r
30 +--------------------------------------------+-----------------------------------------------+
\r
32 +--------------------------------------------+-----------------------------------------------+
\r
34 +--------------------------------------------+-----------------------------------------------+
\r
36 +--------------------------------------------+-----------------------------------------------+
\r
37 |.. image:: images/03_cylindre.png | .. image:: images/03_cylindre_a.png |
\r
38 | :height: 300 | :height: 300 |
\r
39 | :align: center | :align: center |
\r
40 +--------------------------------------------+-----------------------------------------------+
\r
42 +--------------------------------------------+-----------------------------------------------+
\r
43 |.. image:: images/04_cylindre_2.png | .. image:: images/04_cylindre_2_a.png |
\r
44 | :height: 300 | :height: 300 |
\r
45 | :align: center | :align: center |
\r
46 +--------------------------------------------+-----------------------------------------------+
\r
48 +--------------------------------------------+-----------------------------------------------+
\r
49 |.. image:: images/05_disque.png | .. image:: images/05_disque_a.png |
\r
50 | :height: 300 | :height: 300 |
\r
51 | :align: center | :align: center |
\r
52 +--------------------------------------------+-----------------------------------------------+
\r
54 +--------------------------------------------+-----------------------------------------------+
\r
55 |.. image:: images/06_ellipse_1.png | .. image:: images/06_ellipse_1_a.png |
\r
56 | :height: 300 | :height: 300 |
\r
57 | :align: center | :align: center |
\r
58 +--------------------------------------------+-----------------------------------------------+
\r
59 | ellipse_2 (tilted crack) |
\r
60 +--------------------------------------------+-----------------------------------------------+
\r
61 |.. image:: images/07_ellipse_2.png | .. image:: images/07_ellipse_2_a.png |
\r
62 | :height: 300 | :height: 300 |
\r
63 | :align: center | :align: center |
\r
64 +--------------------------------------------+-----------------------------------------------+
\r
65 | eprouvetteCourbe |
\r
66 +--------------------------------------------+-----------------------------------------------+
\r
67 |.. image:: images/08_eprouvetteCourbe.png | .. image:: images/08_eprouvetteCourbe_a.png |
\r
68 | :height: 300 | :height: 300 |
\r
69 | :align: center | :align: center |
\r
70 +--------------------------------------------+-----------------------------------------------+
\r
71 | eprouvetteDroite |
\r
72 +--------------------------------------------+-----------------------------------------------+
\r
73 |.. image:: images/09_eprouvetteDroite.png | .. image:: images/09_eprouvetteDroite_a.png |
\r
74 | :height: 300 | :height: 300 |
\r
75 | :align: center | :align: center |
\r
76 +--------------------------------------------+-----------------------------------------------+
\r
77 | eprouvetteDroite_2 |
\r
78 +--------------------------------------------+-----------------------------------------------+
\r
79 |.. image:: images/10_eprouvetteDroite_2.png | .. image:: images/10_eprouvetteDroite_2_a.png |
\r
80 | :height: 300 | :height: 300 |
\r
81 | :align: center | :align: center |
\r
82 +--------------------------------------------+-----------------------------------------------+
\r
84 +--------------------------------------------+-----------------------------------------------+
\r
85 |.. image:: images/11_faceGauche.png | .. image:: images/11_faceGauche_2.png |
\r
86 | :height: 300 | :height: 300 |
\r
87 | :align: center | :align: center |
\r
88 +--------------------------------------------+-----------------------------------------------+
\r
90 +--------------------------------------------+-----------------------------------------------+
\r
91 |.. image:: images/12_faceGauche_2.png | .. image:: images/12_faceGauche_2_a.png |
\r
92 | :height: 300 | :height: 300 |
\r
93 | :align: center | :align: center |
\r
94 +--------------------------------------------+-----------------------------------------------+
\r
95 | vis (Crack is in the radius filet between the screw head and the screw shank) |
\r
96 +--------------------------------------------+-----------------------------------------------+
\r
97 |.. image:: images/13_vis_1.png | .. image:: images/13_vis_1_2.png |
\r
98 | :width: 400 | :width: 400 |
\r
99 | :align: center | :align: center |
\r
100 +--------------------------------------------+-----------------------------------------------+
\r
102 +--------------------------------------------+-----------------------------------------------+
\r
106 Cracked bended pipes
\r
107 =====================================
\r
109 All 12 bended pipe test cases are not shown here because they are relatively similars with each others. Only test case cas coude_0 et coude_3 are presented, those two tests being based on the same geometry and having a crack on the internal and on the external surface.
\r
111 +--------------------------------+----------------------------------------------+
\r
112 | .. image:: images/coude_0.png | .. image:: images/coude_0_2.png |
\r
113 | :height: 500 | :width: 500 |
\r
114 | :align: center | :align: center |
\r
115 | +----------------------------------------------+
\r
116 | | View of the external crack of test_coude_0 |
\r
117 | +----------------------------------------------+
\r
118 | | .. image:: images/coude_3.png |
\r
120 | | :align: center |
\r
121 +--------------------------------+----------------------------------------------+
\r
122 | Bended pipe test case coude_0 | View of the internal crack of test_coude_3 |
\r
123 | with an external crack | |
\r
124 +--------------------------------+----------------------------------------------+
\r
126 coude_0 can be computed using this file for the data:
\r
128 * :download:`data for a bended puipe <../ihm/dialogFissureCoude.dic>`
\r
130 « Bloc Fissure » is very efficient for the case of bended pipes. The generation of the geometry and the crack insertion takes only around 15s.
\r
132 Data for the test cases
\r
133 =====================================
\r
135 All the files for these test cases are stored in the directory of the installation of SALOME:
\r
137 ``Salome-VXXXX_package-YY/modules/SMESH_VXXXX/lib/python3.6/site-packages/salome/blocFissure``
\r
139 The set of the med, xao and brep files can be created by the following importation:
\r
141 from blocFissure.materielCasTests import genereMateriel
\r
143 Once the files are generated, they are saved into the directory of the installation of SALOME:
\r
145 ``Salome-VXXXX_package-YY/modules/SMESH_VXXXX/lib/python3.6/site-packages/salome/blocFissure/materielCasTests``
\r
147 There is no need to generate them again.
\r
149 To check the installation of salome, the test cases can be computed by the salome test process::
\r
151 salome -test blocFissure
\r
154 =====================================
\r
156 The test cases can be runned by the following instructions::
\r
158 from blocFissure.CasTests.blocFissureTest import blocFissureTest
\r
159 BLOCFISSURE_TEST = blocFissureTest(list_of_cases)
\r
160 MESSAGE_ERREUR = BLOCFISSURE_TEST.lancement()
\r
161 sys.stdout.write(MESSAGE_ERREUR)
\r
162 del BLOCFISSURE_TEST
\r
164 If ``list_of_cases`` is an empty list, all the cases are computed.
\r
166 If not, ``list_of_cases`` is made of the list of the numbers and/or the name of the requested case. The index of each test is the position of the test in the following table, from 0 for cubeAngle, 1 for cubeAngle_2, 2 for cubeCoin... from top to bottom, then from left to right.
\r
168 +--------------------+--------------------+--------------------+-----------------+-----------------+
\r
169 | cubeAngle | cylindre_2 | eprouvetteDroite_2 | fissureCoude_3 | fissureCoude_9 |
\r
170 +--------------------+--------------------+--------------------+-----------------+-----------------+
\r
171 | cubeAngle_2 | disquePerce | faceGauche | fissureCoude_4 | fissure_Coude |
\r
172 +--------------------+--------------------+--------------------+-----------------+-----------------+
\r
173 | cubeCoin | ellipse_1 | faceGauche_2 | fissureCoude_5 | fissure_Coude_4 |
\r
174 +--------------------+--------------------+--------------------+-----------------+-----------------+
\r
175 | cubeMilieu | ellipse_2 | fissureCoude_1 | fissureCoude_6 | vis_1 |
\r
176 +--------------------+--------------------+--------------------+-----------------+-----------------+
\r
177 | cubeTransverse | eprouvetteCourbe | fissureCoude_10 | fissureCoude_7 | |
\r
178 +--------------------+--------------------+--------------------+-----------------+-----------------+
\r
179 | cylindre | eprouvetteDroite | fissureCoude_2 | fissureCoude_8 | |
\r
180 +--------------------+--------------------+--------------------+-----------------+-----------------+
\r
