src/SMESHGUI/SMESH_msg_en.ts

   1 <!DOCTYPE TS>
   2 <TS version="1.1" >
   3     <context>
   4         <name>@default</name>
   5         <message>
   6             <source>AREA_ELEMENTS</source>
   7             <translation>Area</translation>
   8         </message>
   9         <message>
  10             <source>ASPECTRATIO_3D_ELEMENTS</source>
  11             <translation>Aspect Ratio 3D</translation>
  12         </message>
  13         <message>
  14             <source>ASPECTRATIO_ELEMENTS</source>
  15             <translation>Aspect Ratio</translation>
  16         </message>
  17         <message>
  18             <source>COL_ALGO_HEADER</source>
  19             <translation>Algorithm</translation>
  20         </message>
  21         <message>
  22             <source>COL_ERROR_HEADER</source>
  23             <translation>Error</translation>
  24         </message>
  25         <message>
  26             <source>COL_SHAPE_HEADER</source>
  27             <translation>SubShape</translation>
  28         </message>
  29         <message>
  30             <source>COMPERR_ALGO_FAILED</source>
  31             <translation>Algorithm failed</translation>
  32         </message>
  33         <message>
  34             <source>COMPERR_BAD_INPUT_MESH</source>
  35             <translation>Invalid input mesh</translation>
  36         </message>
  37         <message>
  38             <source>COMPERR_BAD_SHAPE</source>
  39             <translation>Unexpected geometry</translation>
  40         </message>
  41         <message>
  42             <source>COMPERR_EXCEPTION</source>
  43             <translation>Unknown exception</translation>
  44         </message>
  45         <message>
  46             <source>COMPERR_MEMORY_PB</source>
  47             <translation>Memory allocation problem</translation>
  48         </message>
  49         <message>
  50             <source>COMPERR_OCC_EXCEPTION</source>
  51             <translation>OCC exception</translation>
  52         </message>
  53         <message>
  54             <source>COMPERR_OK</source>
  55             <translation>No errors</translation>
  56         </message>
  57         <message>
  58             <source>COMPERR_SLM_EXCEPTION</source>
  59             <translation>SALOME exception</translation>
  60         </message>
  61         <message>
  62             <source>COMPERR_STD_EXCEPTION</source>
  63             <translation>std::exception</translation>
  64         </message>
  65         <message>
  66             <source>DIRECT_GEOM_SELECTION</source>
  67             <translation>Direct geometry selection</translation>
  68         </message>
  69         <message>
  70             <source>ELEMENT_ID</source>
  71             <translation>Element ID</translation>
  72         </message>
  73         <message>
  74             <source>FREE_BORDERS</source>
  75             <translation>Free Borders</translation>
  76         </message>
  77         <message>
  78             <source>GEOMETRY_NAME</source>
  79             <translation>Geometry name</translation>
  80         </message>
  81         <message>
  82             <source>GEOM_BY_MESH_ELEM_SELECTION</source>
  83             <translation>Find geometry by mesh element selection</translation>
  84         </message>
  85         <message>
  86             <source>GLOBAL_ALGO</source>
  87             <translation>Global</translation>
  88         </message>
  89         <message>
  90             <source>INF_SELECT_OBJECT</source>
  91             <translation>Select an object</translation>
  92         </message>
  93         <message>
  94             <source>LENGTH2D_EDGES</source>
  95             <translation>Length 2D</translation>
  96         </message>
  97         <message>
  98             <source>LENGTH_EDGES</source>
  99             <translation>Length</translation>
 100         </message>
 101         <message>
 102             <source>LOCAL_ALGO</source>
 103             <translation>Local</translation>
 104         </message>
 105         <message>
 106             <source>MEN_ADD</source>
 107             <translation>Add</translation>
 108         </message>
 109         <message>
 110             <source>MEN_ADV_INFO</source>
 111             <translation>Advanced Mesh Infos</translation>
 112         </message>
 113         <message>
 114             <source>MEN_ALL</source>
 115             <translation>All</translation>
 116         </message>
 117         <message>
 118             <source>MEN_AREA</source>
 119             <translation>Area</translation>
 120         </message>
 121         <message>
 122             <source>MEN_ASPECT</source>
 123             <translation>Aspect Ratio</translation>
 124         </message>
 125         <message>
 126             <source>MEN_ASPECT_3D</source>
 127             <translation>Aspect Ratio 3D</translation>
 128         </message>
 129         <message>
 130             <source>MEN_AUTO_COLOR</source>
 131             <translation>Auto color</translation>
 132         </message>
 133         <message>
 134             <source>MEN_AUTO_UPD</source>
 135             <translation>Automatic update</translation>
 136         </message>
 137         <message>
 138             <source>MEN_BUILD_COMPOUND</source>
 139             <translation>Build Compound</translation>
 140         </message>
 141         <message>
 142             <source>MEN_CLIP</source>
 143             <translation>Clipping</translation>
 144         </message>
 145         <message>
 146             <source>MEN_COLORS</source>
 147             <translation>Colors / Size</translation>
 148         </message>
 149         <message>
 150             <source>MEN_COMPUTE</source>
 151             <translation>Compute</translation>
 152         </message>
 153         <message>
 154             <source>MEN_CONNECTION</source>
 155             <translation>Borders at Multi-Connection</translation>
 156         </message>
 157         <message>
 158             <source>MEN_CONNECTION_2D</source>
 159             <translation>Borders at Multi-Connection 2D</translation>
 160         </message>
 161         <message>
 162             <source>MEN_CONSTRUCT_GROUP</source>
 163             <translation>Construct Group</translation>
 164         </message>
 165         <message>
 166             <source>MEN_CONV_TO_QUAD</source>
 167             <translation>Convert to/from quadratic</translation>
 168         </message>
 169         <message>
 170             <source>MEN_CREATE_GROUP</source>
 171             <translation>Create Group</translation>
 172         </message>
 173         <message>
 174             <source>MEN_CREATE_MESH</source>
 175             <translation>Create Mesh</translation>
 176         </message>
 177         <message>
 178             <source>MEN_CREATE_SUBMESH</source>
 179             <translation>Create Sub-mesh</translation>
 180         </message>
 181         <message>
 182             <source>MEN_CTRL</source>
 183             <translation>Controls</translation>
 184         </message>
 185         <message>
 186             <source>MEN_CUT</source>
 187             <translation>Cutting of quadrangles</translation>
 188         </message>
 189         <message>
 190             <source>MEN_CUT_GROUP</source>
 191             <translation>Cut Groups</translation>
 192         </message>
 193         <message>
 194             <source>MEN_DAT</source>
 195             <translation>DAT file</translation>
 196         </message>
 197         <message>
 198             <source>MEN_DELETE</source>
 199             <translation>Delete</translation>
 200         </message>
 201         <message>
 202             <source>MEN_DEL_GROUP</source>
 203             <translation>Delete Groups</translation>
 204         </message>
 205         <message>
 206             <source>MEN_FACE_ORIENTATION</source>
 207             <translation>Orientation of faces</translation>
 208         </message>
 209         <message>
 210             <source>MEN_DISABLE_AUTO_COLOR</source>
 211             <translation>Disable auto color</translation>
 212         </message>
 213         <message>
 214             <source>MEN_DISPLAY_ONLY</source>
 215             <translation>Show only</translation>
 216         </message>
 217         <message>
 218             <source>MEN_DISPMODE</source>
 219             <translation>Display mode</translation>
 220         </message>
 221         <message>
 222             <source>MEN_DISP_ENT</source>
 223             <translation>Display entity</translation>
 224         </message>
 225         <message>
 226             <source>MEN_EDGE</source>
 227             <translation>Edge</translation>
 228         </message>
 229         <message>
 230             <source>MEN_EDGES</source>
 231             <translation>Edges</translation>
 232         </message>
 233         <message>
 234             <source>MEN_EDIT</source>
 235             <translation>Edit</translation>
 236         </message>
 237         <message>
 238             <source>MEN_EDIT_GROUP</source>
 239             <translation>Edit Group</translation>
 240         </message>
 241         <message>
 242             <source>MEN_EDIT_HYPO</source>
 243             <translation>Edit Hypothesis</translation>
 244         </message>
 245         <message>
 246             <source>MEN_EDIT_MESHSUBMESH</source>
 247             <translation>Edit Mesh/Sub-mesh</translation>
 248         </message>
 249         <message>
 250             <source>MEN_EXPORT</source>
 251             <translation>Export</translation>
 252         </message>
 253         <message>
 254             <source>MEN_EXPORT_DAT</source>
 255             <translation>Export to DAT file</translation>
 256         </message>
 257         <message>
 258             <source>MEN_EXPORT_MED</source>
 259             <translation>Export to MED file</translation>
 260         </message>
 261         <message>
 262             <source>MEN_EXPORT_STL</source>
 263             <translation>Export to STL file</translation>
 264         </message>
 265         <message>
 266             <source>MEN_EXPORT_UNV</source>
 267             <translation>Export to UNV file</translation>
 268         </message>
 269         <message>
 270             <source>MEN_EXTRUSION</source>
 271             <translation>Extrusion</translation>
 272         </message>
 273         <message>
 274             <source>MEN_EXTRUSION_ALONG</source>
 275             <translation>Extrusion along a path</translation>
 276         </message>
 277         <message>
 278             <source>MEN_FACES</source>
 279             <translation>Faces</translation>
 280         </message>
 281         <message>
 282             <source>MEN_FILE</source>
 283             <translation>File</translation>
 284         </message>
 285         <message>
 286             <source>MEN_FREE_BORDER</source>
 287             <translation>Free Borders</translation>
 288         </message>
 289         <message>
 290             <source>MEN_FREE_EDGE</source>
 291             <translation>Free Edges</translation>
 292         </message>
 293         <message>
 294             <source>MEN_GLOBAL_HYPO</source>
 295             <translation>Global Hypothesis</translation>
 296         </message>
 297         <message>
 298             <source>MEN_HEXA</source>
 299             <translation>Hexahedron</translation>
 300         </message>
 301         <message>
 302             <source>MEN_HIDE</source>
 303             <translation>Hide</translation>
 304         </message>
 305         <message>
 306             <source>MEN_HYPO</source>
 307             <translation>Hypotheses</translation>
 308         </message>
 309         <message>
 310             <source>MEN_IMPORT</source>
 311             <translation>Import</translation>
 312         </message>
 313         <message>
 314             <source>MEN_INT_GROUP</source>
 315             <translation>Intersect Groups</translation>
 316         </message>
 317         <message>
 318             <source>MEN_INV</source>
 319             <translation>Diagonal Inversion</translation>
 320         </message>
 321         <message>
 322             <source>MEN_LENGTH</source>
 323             <translation>Length</translation>
 324         </message>
 325         <message>
 326             <source>MEN_LENGTH_2D</source>
 327             <translation>Length 2D</translation>
 328         </message>
 329         <message>
 330             <source>MEN_MAP</source>
 331             <translation>Pattern mapping</translation>
 332         </message>
 333         <message>
 334             <source>MEN_MED</source>
 335             <translation>MED file</translation>
 336         </message>
 337         <message>
 338             <source>MEN_MERGE</source>
 339             <translation>Merge nodes</translation>
 340         </message>
 341         <message>
 342             <source>MEN_MERGE_ELEMENTS</source>
 343             <translation>Merge elements</translation>
 344         </message>
 345         <message>
 346             <source>MEN_MESH</source>
 347             <translation>Mesh</translation>
 348         </message>
 349         <message>
 350             <source>MEN_MESH_THROU_POINT</source>
 351             <translation>Mesh to pass through a point</translation>
 352         </message>
 353         <message>
 354             <source>MEN_MIN_ANG</source>
 355             <translation>Minimum Angle</translation>
 356         </message>
 357         <message>
 358             <source>MEN_MODIFY</source>
 359             <translation>Modification</translation>
 360         </message>
 361         <message>
 362             <source>MEN_MOVE</source>
 363             <translation>Move Node</translation>
 364         </message>
 365         <message>
 366             <source>MEN_NODE</source>
 367             <translation>Node</translation>
 368         </message>
 369         <message>
 370             <source>MEN_NODES</source>
 371             <translation>Nodes</translation>
 372         </message>
 373         <message>
 374             <source>MEN_NUM</source>
 375             <translation>Numbering</translation>
 376         </message>
 377         <message>
 378             <source>MEN_NUM_ELEMENTS</source>
 379             <translation>Display Elements #</translation>
 380         </message>
 381         <message>
 382             <source>MEN_NUM_NODES</source>
 383             <translation>Display Nodes #</translation>
 384         </message>
 385         <message>
 386             <source>MEN_ORIENT</source>
 387             <translation>Orientation</translation>
 388         </message>
 389         <message>
 390             <source>MEN_POLYGON</source>
 391             <translation>Polygon</translation>
 392         </message>
 393         <message>
 394             <source>MEN_POLYHEDRON</source>
 395             <translation>Polyhedron</translation>
 396         </message>
 397         <message>
 398             <source>MEN_PRECISION</source>
 399             <translation>Precision</translation>
 400         </message>
 401         <message>
 402             <source>MEN_PREF</source>
 403             <translation>Preferences</translation>
 404         </message>
 405         <message>
 406             <source>MEN_QUAD</source>
 407             <translation>Quadrangle</translation>
 408         </message>
 409         <message>
 410             <source>MEN_QUADRATIC_EDGE</source>
 411             <translation>Quadratic Edge</translation>
 412         </message>
 413         <message>
 414             <source>MEN_QUADRATIC_HEXAHEDRON</source>
 415             <translation>Quadratic Hexahedron</translation>
 416         </message>
 417         <message>
 418             <source>MEN_QUADRATIC_PENTAHEDRON</source>
 419             <translation>Quadratic Pentahedron</translation>
 420         </message>
 421         <message>
 422             <source>MEN_QUADRATIC_PYRAMID</source>
 423             <translation>Quadratic Pyramid</translation>
 424         </message>
 425         <message>
 426             <source>MEN_QUADRATIC_QUADRANGLE</source>
 427             <translation>Quadratic Quadrangle</translation>
 428         </message>
 429         <message>
 430             <source>MEN_QUADRATIC_TETRAHEDRON</source>
 431             <translation>Quadratic Tetrahedron</translation>
 432         </message>
 433         <message>
 434             <source>MEN_QUADRATIC_TRIANGLE</source>
 435             <translation>Quadratic Triangle</translation>
 436         </message>
 437         <message>
 438             <source>MEN_QUALITY</source>
 439             <translation>Quality controls</translation>
 440         </message>
 441         <message>
 442             <source>MEN_REMOVE</source>
 443             <translation>Remove</translation>
 444         </message>
 445         <message>
 446             <source>MEN_REMOVE_ELEMENTS</source>
 447             <translation>Elements</translation>
 448         </message>
 449         <message>
 450             <source>MEN_REMOVE_NODES</source>
 451             <translation>Nodes</translation>
 452         </message>
 453         <message>
 454             <source>MEN_RENAME</source>
 455             <translation>Rename</translation>
 456         </message>
 457         <message>
 458             <source>MEN_RENUM</source>
 459             <translation>Renumbering</translation>
 460         </message>
 461         <message>
 462             <source>MEN_RENUM_ELEMENTS</source>
 463             <translation>Elements</translation>
 464         </message>
 465         <message>
 466             <source>MEN_RENUM_NODES</source>
 467             <translation>Nodes</translation>
 468         </message>
 469         <message>
 470             <source>MEN_RESET</source>
 471             <translation>Reset</translation>
 472         </message>
 473         <message>
 474             <source>MEN_REVOLUTION</source>
 475             <translation>Revolution</translation>
 476         </message>
 477         <message>
 478             <source>MEN_ROT</source>
 479             <translation>Rotation</translation>
 480         </message>
 481         <message>
 482             <source>MEN_SCALAR_BAR</source>
 483             <translation>Scalar bar</translation>
 484         </message>
 485         <message>
 486             <source>MEN_SCALAR_BAR_PROP</source>
 487             <translation>Scalar bar Properties</translation>
 488         </message>
 489         <message>
 490             <source>MEN_SELECTION</source>
 491             <translation>Selection</translation>
 492         </message>
 493         <message>
 494             <source>MEN_SEL_FILTER_LIB</source>
 495             <translation>Selection filters library</translation>
 496         </message>
 497         <message>
 498             <source>MEN_SEW</source>
 499             <translation>Sewing</translation>
 500         </message>
 501         <message>
 502             <source>MEN_SHADE</source>
 503             <translation>Shading</translation>
 504         </message>
 505         <message>
 506             <source>MEN_SHOW</source>
 507             <translation>Show</translation>
 508         </message>
 509         <message>
 510             <source>MEN_SHRINK</source>
 511             <translation>Shrink</translation>
 512         </message>
 513         <message>
 514             <source>MEN_SKEW</source>
 515             <translation>Skew</translation>
 516         </message>
 517         <message>
 518             <source>MEN_SMOOTH</source>
 519             <translation>Smoothing</translation>
 520         </message>
 521         <message>
 522             <source>MEN_STD_INFO</source>
 523             <translation>Standard Mesh Infos</translation>
 524         </message>
 525         <message>
 526             <source>MEN_STL</source>
 527             <translation>STL file</translation>
 528         </message>
 529         <message>
 530             <source>MEN_SYM</source>
 531             <translation>Symmetry</translation>
 532         </message>
 533         <message>
 534             <source>MEN_TAPER</source>
 535             <translation>Taper</translation>
 536         </message>
 537         <message>
 538             <source>MEN_TETRA</source>
 539             <translation>Tetrahedron</translation>
 540         </message>
 541         <message>
 542             <source>MEN_TOOLS</source>
 543             <translation>Tools</translation>
 544         </message>
 545         <message>
 546             <source>MEN_TRANS</source>
 547             <translation>Translation</translation>
 548         </message>
 549         <message>
 550             <source>MEN_TRANSF</source>
 551             <translation>Transformation</translation>
 552         </message>
 553         <message>
 554             <source>MEN_TRANSP</source>
 555             <translation>Transparency</translation>
 556         </message>
 557         <message>
 558             <source>MEN_TRIANGLE</source>
 559             <translation>Triangle</translation>
 560         </message>
 561         <message>
 562             <source>MEN_UNASSIGN</source>
 563             <translation>Unassign</translation>
 564         </message>
 565         <message>
 566             <source>MEN_UNION</source>
 567             <translation>Union of triangles</translation>
 568         </message>
 569         <message>
 570             <source>MEN_UNION2</source>
 571             <translation>Union of two triangles</translation>
 572         </message>
 573         <message>
 574             <source>MEN_UNV</source>
 575             <translation>UNV file</translation>
 576         </message>
 577         <message>
 578             <source>MEN_UN_GROUP</source>
 579             <translation>Union Groups</translation>
 580         </message>
 581         <message>
 582             <source>MEN_UPDATE</source>
 583             <translation>Update</translation>
 584         </message>
 585         <message>
 586             <source>MEN_VIEW</source>
 587             <translation>View</translation>
 588         </message>
 589         <message>
 590             <source>MEN_VOLUMES</source>
 591             <translation>Volumes</translation>
 592         </message>
 593         <message>
 594             <source>MEN_VOLUME_3D</source>
 595             <translation>Volume</translation>
 596         </message>
 597         <message>
 598             <source>MEN_WARP</source>
 599             <translation>Warping angle</translation>
 600         </message>
 601         <message>
 602             <source>MEN_WHAT_IS</source>
 603             <translation>Mesh Element Info</translation>
 604         </message>
 605         <message>
 606             <source>MEN_WIRE</source>
 607             <translation>Wireframe</translation>
 608         </message>
 609         <message>
 610             <source>MESHERS_FILE_CANT_OPEN</source>
 611             <translation>Can not open resource file</translation>
 612         </message>
 613         <message>
 614             <source>MESHERS_FILE_CHECK_VARIABLE</source>
 615             <translation>Check environment variable SMESH_MeshersList</translation>
 616         </message>
 617         <message>
 618             <source>MESHERS_FILE_NO_VARIABLE</source>
 619             <translation>Environment variable SMESH_MeshersList is not defined</translation>
 620         </message>
 621         <message>
 622             <source>MESH_IS_NOT_SELECTED</source>
 623             <translation>There is no selected mesh
 624 Please, select a mesh and try again</translation>
 625         </message>
 626         <message>
 627             <source>MESH_NODE</source>
 628             <translation>Node</translation>
 629         </message>
 630         <message>
 631             <source>MESH_NODE_TITLE</source>
 632             <translation>Add Node</translation>
 633         </message>
 634         <message>
 635             <source>MINIMUMANGLE_ELEMENTS</source>
 636             <translation>Minimum Angle</translation>
 637         </message>
 638         <message>
 639             <source>MULTI2D_BORDERS</source>
 640             <translation>Borders at Multi-Connections 2D</translation>
 641         </message>
 642         <message>
 643             <source>MULTI_BORDERS</source>
 644             <translation>Borders at Multi-Connections</translation>
 645         </message>
 646         <message>
 647             <source>NODE_ID</source>
 648             <translation>Node ID</translation>
 649         </message>
 650         <message>
 651             <source>NON_SMESH_OBJECTS_SELECTED</source>
 652             <translation>There are objects selected which do not belong to %1 component.</translation>
 653         </message>
 654         <message>
 655             <source>PREVIEW</source>
 656             <translation>Preview</translation>
 657         </message>
 658         <message>
 659             <source>SKEW_ELEMENTS</source>
 660             <translation>Skew</translation>
 661         </message>
 662         <message>
 663             <source>SMESHGUI_INVALID_PARAMETERS</source>
 664             <translation>Parameters are not correctly specified
 665 Please enter correct values and try again</translation>
 666         </message>
 667         <message>
 668             <source>SMESH_ADD_ALGORITHM</source>
 669             <translation>Algorithms</translation>
 670         </message>
 671         <message>
 672             <source>SMESH_ADD_ALGORITHM_TITLE</source>
 673             <translation>Algorithms Assignation</translation>
 674         </message>
 675         <message>
 676             <source>SMESH_ADD_EDGE</source>
 677             <translation>Add Edge</translation>
 678         </message>
 679         <message>
 680             <source>SMESH_ADD_EDGE_TITLE</source>
 681             <translation>Add Edge</translation>
 682         </message>
 683         <message>
 684             <source>SMESH_ADD_HEXAS</source>
 685             <translation>Add Hexahedron</translation>
 686         </message>
 687         <message>
 688             <source>SMESH_ADD_HEXAS_TITLE</source>
 689             <translation>Add Hexahedron</translation>
 690         </message>
 691         <message>
 692             <source>SMESH_ADD_HYPOTHESIS</source>
 693             <translation>Hypothesis</translation>
 694         </message>
 695         <message>
 696             <source>SMESH_ADD_HYPOTHESIS_TITLE</source>
 697             <translation>Hypothesis Assignation</translation>
 698         </message>
 699         <message>
 700             <source>SMESH_ADD_HYP_WRN</source>
 701             <translation>"%1" assigned but:
 702 </translation>
 703         </message>
 704         <message>
 705             <source>SMESH_ADD_POLYGON</source>
 706             <translation>Add polygon</translation>
 707         </message>
 708         <message>
 709             <source>SMESH_ADD_POLYGON_TITLE</source>
 710             <translation>Add polygon</translation>
 711         </message>
 712         <message>
 713             <source>SMESH_ADD_QUADRANGLE</source>
 714             <translation>Add Quadrangle</translation>
 715         </message>
 716         <message>
 717             <source>SMESH_ADD_QUADRANGLE_TITLE</source>
 718             <translation>Add Quadrangle</translation>
 719         </message>
 720         <message>
 721             <source>SMESH_ADD_QUADRATIC_EDGE_TITLE</source>
 722             <translation>Add Quadratic Edge</translation>
 723         </message>
 724         <message>
 725             <source>SMESH_ADD_QUADRATIC_HEXAHEDRON_TITLE</source>
 726             <translation>Add Quadratic Hexahedron</translation>
 727         </message>
 728         <message>
 729             <source>SMESH_ADD_QUADRATIC_PENTAHEDRON_TITLE</source>
 730             <translation>Add Quadratic Pentahedron</translation>
 731         </message>
 732         <message>
 733             <source>SMESH_ADD_QUADRATIC_PYRAMID_TITLE</source>
 734             <translation>Add Quadratic Pyramid</translation>
 735         </message>
 736         <message>
 737             <source>SMESH_ADD_QUADRATIC_QUADRANGLE_TITLE</source>
 738             <translation>Add Quadratic Quadrangle</translation>
 739         </message>
 740         <message>
 741             <source>SMESH_ADD_QUADRATIC_TETRAHEDRON_TITLE</source>
 742             <translation>Add Quadratic Tetrahedron</translation>
 743         </message>
 744         <message>
 745             <source>SMESH_ADD_QUADRATIC_TRIANGLE_TITLE</source>
 746             <translation>Add Quadratic Triangle</translation>
 747         </message>
 748         <message>
 749             <source>SMESH_ADD_SUBMESH</source>
 750             <translation>SubMesh Construction</translation>
 751         </message>
 752         <message>
 753             <source>SMESH_ADD_TETRAS</source>
 754             <translation>Add Tetrahedron</translation>
 755         </message>
 756         <message>
 757             <source>SMESH_ADD_TETRAS_TITLE</source>
 758             <translation>Add Tetrahedron</translation>
 759         </message>
 760         <message>
 761             <source>SMESH_ADD_TRIANGLE</source>
 762             <translation>Add Triangle</translation>
 763         </message>
 764         <message>
 765             <source>SMESH_ADD_TRIANGLE_TITLE</source>
 766             <translation>Add Triangle</translation>
 767         </message>
 768         <message>
 769             <source>SMESH_ANGLE</source>
 770             <translation>Angle</translation>
 771         </message>
 772         <message>
 773             <source>SMESH_ARGUMENTS</source>
 774             <translation>Arguments</translation>
 775         </message>
 776         <message>
 777             <source>SMESH_AUTO_GROUPS</source>
 778             <translation>Automatically create groups</translation>
 779         </message>
 780         <message>
 781             <source>SMESH_AVAILABLE</source>
 782             <translation>Available</translation>
 783         </message>
 784         <message>
 785             <source>SMESH_AVAILABLE_ALGORITHMS</source>
 786             <translation>Available algorithms</translation>
 787         </message>
 788         <message>
 789             <source>SMESH_AVAILABLE_HYPOTHESES</source>
 790             <translation>Available hypotheses</translation>
 791         </message>
 792         <message>
 793             <source>SMESH_AXIS</source>
 794             <translation>Axis</translation>
 795         </message>
 796         <message>
 797             <source>SMESH_BAD_SELECTION</source>
 798             <translation>No valid selection</translation>
 799         </message>
 800         <message>
 801             <source>SMESH_BOUNDARYEDGES</source>
 802             <translation>Boundary Edges</translation>
 803         </message>
 804         <message>
 805             <source>SMESH_BUILD_COMPOUND_TITLE</source>
 806             <translation>Create a Compound</translation>
 807         </message>
 808         <message>
 809             <source>SMESH_BUT_ADD</source>
 810             <translation>A&amp;dd</translation>
 811         </message>
 812         <message>
 813             <source>SMESH_BUT_APPLY</source>
 814             <translation>&amp;Apply</translation>
 815         </message>
 816         <message>
 817             <source>SMESH_BUT_CANCEL</source>
 818             <translation>&amp;Cancel</translation>
 819         </message>
 820         <message>
 821             <source>SMESH_BUT_CLOSE</source>
 822             <translation>&amp;Close</translation>
 823         </message>
 824         <message>
 825             <source>SMESH_BUT_CREATE</source>
 826             <translation>Create</translation>
 827         </message>
 828         <message>
 829             <source>SMESH_BUT_DELETE</source>
 830             <translation>Delete</translation>
 831         </message>
 832         <message>
 833             <source>SMESH_BUT_FILTER</source>
 834             <translation>Set &amp;Filters</translation>
 835         </message>
 836         <message>
 837             <source>SMESH_BUT_HELP</source>
 838             <translation>&amp;Help</translation>
 839         </message>
 840         <message>
 841             <source>SMESH_BUT_NEW</source>
 842             <translation>New</translation>
 843         </message>
 844         <message>
 845             <source>SMESH_BUT_NO</source>
 846             <translation>&amp;No</translation>
 847         </message>
 848         <message>
 849             <source>SMESH_BUT_OK</source>
 850             <translation>&amp;Ok</translation>
 851         </message>
 852         <message>
 853             <source>SMESH_BUT_APPLY_AND_CLOSE</source>
 854             <translation>A&amp;pply and Close</translation>
 855         </message>
 856         <message>
 857             <source>SMESH_BUT_REMOVE</source>
 858             <translation>&amp;Remove</translation>
 859         </message>
 860         <message>
 861             <source>SMESH_BUT_SORT</source>
 862             <translation>&amp;Sort List</translation>
 863         </message>
 864         <message>
 865             <source>SMESH_BUT_YES</source>
 866             <translation>&amp;Yes</translation>
 867         </message>
 868         <message>
 869             <source>SMESH_CANT_ADD_HYP</source>
 870             <translation>Can not assign "%1":
 871 </translation>
 872         </message>
 873         <message>
 874             <source>SMESH_CANT_RM_HYP</source>
 875             <translation>Can not unassign "%1":
 876 </translation>
 877         </message>
 878         <message>
 879             <source>SMESH_CHECK_COLOR</source>
 880             <translation>Color</translation>
 881         </message>
 882         <message>
 883             <source>SMESH_CLIPPING_FROM</source>
 884             <translation>From &lt;---</translation>
 885         </message>
 886         <message>
 887             <source>SMESH_CLIPPING_INTO</source>
 888             <translation>---> Into</translation>
 889         </message>
 890         <message>
 891             <source>SMESH_CLIPPING_TITLE</source>
 892             <translation>Change Clipping</translation>
 893         </message>
 894         <message>
 895             <source>SMESH_COMPUTE_SUCCEED</source>
 896             <translation>Mesh computation succeed</translation>
 897         </message>
 898         <message>
 899             <source>SMESH_CONTENT</source>
 900             <translation>Content</translation>
 901         </message>
 902         <message>
 903             <source>SMESH_CONTINUE_MESH_VISUALIZATION</source>
 904             <translation>It seems that there is not enough memory to show the mesh
 905 so that the application may crash. Do you wish to continue visualization?</translation>
 906         </message>
 907         <message>
 908             <source>SMESH_COORDINATES</source>
 909             <translation>Coordinates</translation>
 910         </message>
 911         <message>
 912             <source>SMESH_COPY_ELEMENTS</source>
 913             <translation>Copy Elements</translation>
 914         </message>
 915         <message>
 916             <source>SMESH_COPY_GROUPS</source>
 917             <translation>Copy groups</translation>
 918         </message>
 919         <message>
 920             <source>SMESH_CREATE_ALGORITHMS</source>
 921             <translation>Create algorithms</translation>
 922         </message>
 923         <message>
 924             <source>SMESH_CREATE_COPY</source>
 925             <translation>Create a copy</translation>
 926         </message>
 927         <message>
 928             <source>SMESH_CREATE_GROUP_TITLE</source>
 929             <translation>Create Group</translation>
 930         </message>
 931         <message>
 932             <source>SMESH_CREATE_HYPOTHESES</source>
 933             <translation>Create hypotheses</translation>
 934         </message>
 935         <message>
 936             <source>SMESH_CREATE_MESH</source>
 937             <translation>Create a new mesh</translation>
 938         </message>
 939         <message>
 940             <source>SMESH_CREATE_POLYHEDRAL_VOLUME_TITLE</source>
 941             <translation>Create polyhedral volume</translation>
 942         </message>
 943         <message>
 944             <source>SMESH_DIAGONAL</source>
 945             <translation>Diagonal Inversion</translation>
 946         </message>
 947         <message>
 948             <source>SMESH_DIAGONAL_INVERSION_TITLE</source>
 949             <translation>Diagonal Inversion</translation>
 950         </message>
 951         <message>
 952             <source>SMESH_DISTANCE</source>
 953             <translation>Distance</translation>
 954         </message>
 955         <message>
 956             <source>SMESH_DRS_1</source>
 957             <translation>MED file contains no mesh with the given name</translation>
 958         </message>
 959         <message>
 960             <source>SMESH_DRS_2</source>
 961             <translation>MED file has overlapped ranges of element numbers, the numbers from the file are ignored</translation>
 962         </message>
 963         <message>
 964             <source>SMESH_DRS_3</source>
 965             <translation>Some elements were skipped due to incorrect file data</translation>
 966         </message>
 967         <message>
 968             <source>SMESH_DRS_4</source>
 969             <translation>The file is incorrect, some data is missed</translation>
 970         </message>
 971         <message>
 972             <source>SMESH_DRS_EMPTY</source>
 973             <translation>The file is empty, there is nothing to be published</translation>
 974         </message>
 975         <message>
 976             <source>SMESH_DX</source>
 977             <translation>dX</translation>
 978         </message>
 979         <message>
 980             <source>SMESH_DY</source>
 981             <translation>dY</translation>
 982         </message>
 983         <message>
 984             <source>SMESH_DZ</source>
 985             <translation>dZ</translation>
 986         </message>
 987         <message>
 988             <source>SMESH_EDGE</source>
 989             <translation>Edge</translation>
 990         </message>
 991         <message>
 992             <source>SMESH_EDGES_CONNECTIVITY_TITLE</source>
 993             <translation>Edges Connectivity</translation>
 994         </message>
 995         <message>
 996             <source>SMESH_EDIT_GROUP_TITLE</source>
 997             <translation>Edit Group</translation>
 998         </message>
 999         <message>
1000             <source>SMESH_EDIT_HYPOTHESES</source>
1001             <translation>Hypotheses Assignation</translation>
1002         </message>
1003         <message>
1004             <source>SMESH_EDIT_USED</source>
1005             <translation>Used</translation>
1006         </message>
1007         <message>
1008             <source>SMESH_ELEMENTS</source>
1009             <translation>Elements</translation>
1010         </message>
1011         <message>
1012             <source>SMESH_ELEMENTS_COLOR</source>
1013             <translation>Mesh Element Color</translation>
1014         </message>
1015         <message>
1016             <source>SMESH_ELEMENTS_TYPE</source>
1017             <translation>Elements Type</translation>
1018         </message>
1019         <message>
1020             <source>SMESH_ELEMENT_TYPE</source>
1021             <translation>Element Type</translation>
1022         </message>
1023         <message>
1024             <source>SMESH_ERROR</source>
1025             <translation>Error</translation>
1026         </message>
1027         <message>
1028             <source>SMESH_ERR_SCALARBAR_PARAMS</source>
1029             <translation>Warning! The parameters is incorrect</translation>
1030         </message>
1031         <message>
1032             <source>SMESH_EXPORT_FAILED</source>
1033             <translation>Mesh export failed.
1034 Probably, there is not enough space on disk.</translation>
1035         </message>
1036         <message>
1037             <source>SMESH_EXPORT_MED_DUPLICATED_GRP</source>
1038             <translation>There are duplicated group names in mesh "%1".
1039 You can cancel exporting and rename them,
1040 otherwise some group names in the resulting MED file
1041 will not match ones in the study.
1042 Do you want to continue ?</translation>
1043         </message>
1044         <message>
1045             <source>SMESH_EXPORT_MED_V2_1</source>
1046             <translation>During export mesh with name - "%1" to MED 2.1
1047 polygons and polyhedrons elements will be missed
1048 For correct export use MED 2.2
1049 Are you sure want to export to MED 2.1 ?</translation>
1050         </message>
1051         <message>
1052             <source>SMESH_EXPORT_STL1</source>
1053             <translation>Mesh  - "%1" does not contain triangles</translation>
1054         </message>
1055         <message>
1056             <source>SMESH_EXPORT_STL2</source>
1057             <translation>Mesh  - "%1" contains another than triangles elements,     they are ignored during writing to STL</translation>
1058         </message>
1059         <message>
1060             <source>SMESH_EXPORT_UNV</source>
1061             <translation>During export mesh with name - "%1" to UNV
1062        pyramid's elements will be missed</translation>
1063         </message>
1064         <message>
1065             <source>SMESH_EXTRUSION</source>
1066             <translation>Extrusion</translation>
1067         </message>
1068         <message>
1069             <source>SMESH_FACE</source>
1070             <translation>Face</translation>
1071         </message>
1072         <message>
1073             <source>SMESH_FEATUREANGLE</source>
1074             <translation>Feature Angle</translation>
1075         </message>
1076         <message>
1077             <source>SMESH_FEATUREEDGES</source>
1078             <translation>Feature Edges</translation>
1079         </message>
1080         <message>
1081             <source>SMESH_FONT_ARIAL</source>
1082             <translation>Arial</translation>
1083         </message>
1084         <message>
1085             <source>SMESH_FONT_BOLD</source>
1086             <translation>Bold</translation>
1087         </message>
1088         <message>
1089             <source>SMESH_FONT_COURIER</source>
1090             <translation>Courier</translation>
1091         </message>
1092         <message>
1093             <source>SMESH_FONT_ITALIC</source>
1094             <translation>Italic</translation>
1095         </message>
1096         <message>
1097             <source>SMESH_FONT_SCALARBAR</source>
1098             <translation>Font</translation>
1099         </message>
1100         <message>
1101             <source>SMESH_FONT_SHADOW</source>
1102             <translation>Shadow</translation>
1103         </message>
1104         <message>
1105             <source>SMESH_FONT_TIMES</source>
1106             <translation>Times</translation>
1107         </message>
1108         <message>
1109             <source>SMESH_GEOM_GROUP</source>
1110             <translation>Geometry group</translation>
1111         </message>
1112         <message>
1113             <source>SMESH_GROUP</source>
1114             <translation>Group</translation>
1115         </message>
1116         <message>
1117             <source>SMESH_GROUP_GEOMETRY</source>
1118             <translation>Group on geometry</translation>
1119         </message>
1120         <message>
1121             <source>SMESH_GROUP_SELECTED</source>
1122             <translation>%1 Groups</translation>
1123         </message>
1124         <message>
1125             <source>SMESH_GROUP_STANDALONE</source>
1126             <translation>Standalone group</translation>
1127         </message>
1128         <message>
1129             <source>SMESH_GROUP_TYPE</source>
1130             <translation>Group type</translation>
1131         </message>
1132         <message>
1133             <source>SMESH_HEIGHT</source>
1134             <translation>Height:</translation>
1135         </message>
1136         <message>
1137             <source>SMESH_HEXAS</source>
1138             <translation>Hexahedron</translation>
1139         </message>
1140         <message>
1141             <source>SMESH_HILIGHT_COLOR</source>
1142             <translation>Highlight Color</translation>
1143         </message>
1144         <message>
1145             <source>SMESH_HORIZONTAL</source>
1146             <translation>Horizontal</translation>
1147         </message>
1148         <message>
1149             <source>SMESH_HYPOTHESES</source>
1150             <translation>Hypotheses</translation>
1151         </message>
1152         <message>
1153             <source>SMESH_HYP_1</source>
1154             <translation>Algorithm misses a hypothesis</translation>
1155         </message>
1156         <message>
1157             <source>SMESH_HYP_10</source>
1158             <translation>Hypothesis and submesh dimensions mismatch</translation>
1159         </message>
1160         <message>
1161             <source>SMESH_HYP_11</source>
1162             <translation>Shape is neither the main one, nor its subshape, nor a valid group</translation>
1163         </message>
1164         <message>
1165             <source>SMESH_HYP_12</source>
1166             <translation>Geomerty mismatches algorithm's expectation</translation>
1167         </message>
1168         <message>
1169             <source>SMESH_HYP_13</source>
1170             <translation>Algorithm can't work without shape</translation>
1171         </message>
1172         <message>
1173             <source>SMESH_HYP_2</source>
1174             <translation>There are concurrent hypotheses on a shape</translation>
1175         </message>
1176         <message>
1177             <source>SMESH_HYP_3</source>
1178             <translation>Hypothesis has a bad parameter value</translation>
1179         </message>
1180         <message>
1181             <source>SMESH_HYP_4</source>
1182             <translation>Submesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
1183         </message>
1184         <message>
1185             <source>SMESH_HYP_5</source>
1186             <translation>Algorithm hides algorithm(s) of lower dimension by generating all-dimensions elements</translation>
1187         </message>
1188         <message>
1189             <source>SMESH_HYP_6</source>
1190             <translation>Unknown fatal error at hypothesis definition</translation>
1191         </message>
1192         <message>
1193             <source>SMESH_HYP_7</source>
1194             <translation>Hypothesis is not suitable in the current context</translation>
1195         </message>
1196         <message>
1197             <source>SMESH_HYP_8</source>
1198             <translation>Non-conform mesh is produced using applied hypotheses</translation>
1199         </message>
1200         <message>
1201             <source>SMESH_HYP_9</source>
1202             <translation>Such dimention hypothesis is already assigned to the shape</translation>
1203         </message>
1204         <message>
1205             <source>SMESH_ID_DIAGONAL</source>
1206             <translation>Id Edges</translation>
1207         </message>
1208         <message>
1209             <source>SMESH_ID_ELEMENTS</source>
1210             <translation>Id Elements</translation>
1211         </message>
1212         <message>
1213             <source>SMESH_ID_FACES</source>
1214             <translation>Id Faces</translation>
1215         </message>
1216         <message>
1217             <source>SMESH_ID_NODES</source>
1218             <translation>Id Nodes</translation>
1219         </message>
1220         <message>
1221             <source>SMESH_INCORRECT_INPUT</source>
1222             <translation>Incorrect input data!</translation>
1223         </message>
1224         <message>
1225             <source>SMESH_INFORMATION</source>
1226             <translation>Information</translation>
1227         </message>
1228         <message>
1229             <source>SMESH_INIT</source>
1230             <translation>Mesh</translation>
1231         </message>
1232         <message>
1233             <source>SMESH_INIT_MESH</source>
1234             <translation>Mesh Construction</translation>
1235         </message>
1236         <message>
1237             <source>SMESH_INSUFFICIENT_DATA</source>
1238             <translation>Insufficient input value</translation>
1239         </message>
1240         <message>
1241             <source>SMESH_LABELS</source>
1242             <translation>Labels:</translation>
1243         </message>
1244         <message>
1245             <source>SMESH_LABELS_COLORS_SCALARBAR</source>
1246             <translation>Colors &amp;&amp; Labels</translation>
1247         </message>
1248         <message>
1249             <source>SMESH_LENGTH</source>
1250             <translation>Length</translation>
1251         </message>
1252         <message>
1253             <source>SMESH_MAKE_GROUPS</source>
1254             <translation>Generate groups</translation>
1255         </message>
1256         <message>
1257             <source>SMESH_MANIFOLDEDGES</source>
1258             <translation>Manifold Edges</translation>
1259         </message>
1260         <message>
1261             <source>SMESH_MAX</source>
1262             <translation>Max</translation>
1263         </message>
1264         <message>
1265             <source>SMESH_MEN_ALGORITHMS</source>
1266             <translation>Algorithms</translation>
1267         </message>
1268         <message>
1269             <source>SMESH_MEN_APPLIED_ALGORIHTMS</source>
1270             <translation>Applied Algorithms</translation>
1271         </message>
1272         <message>
1273             <source>SMESH_MEN_APPLIED_HYPOTHESIS</source>
1274             <translation>Applied Hypotheses</translation>
1275         </message>
1276         <message>
1277             <source>SMESH_MEN_COMPONENT</source>
1278             <translation>SMESH</translation>
1279         </message>
1280         <message>
1281             <source>SMESH_MEN_HYPOTHESIS</source>
1282             <translation>Hypotheses</translation>
1283         </message>
1284         <message>
1285             <source>SMESH_MEN_SubMeshesOnCompound</source>
1286             <translation>SubMeshes On Compound</translation>
1287         </message>
1288         <message>
1289             <source>SMESH_MEN_SubMeshesOnEdge</source>
1290             <translation>SubMeshes On Edge</translation>
1291         </message>
1292         <message>
1293             <source>SMESH_MEN_SubMeshesOnFace</source>
1294             <translation>SubMeshes On Face</translation>
1295         </message>
1296         <message>
1297             <source>SMESH_MEN_SubMeshesOnSolid</source>
1298             <translation>SubMeshes On Solid</translation>
1299         </message>
1300         <message>
1301             <source>SMESH_MEN_SubMeshesOnVertex</source>
1302             <translation>SubMeshes On Vertex</translation>
1303         </message>
1304         <message>
1305             <source>SMESH_MERGE_ELEMENTS</source>
1306             <translation>Merge elements</translation>
1307         </message>
1308         <message>
1309             <source>SMESH_MERGE_NODES</source>
1310             <translation>Merge nodes</translation>
1311         </message>
1312         <message>
1313             <source>SMESH_MESH</source>
1314             <translation>Mesh</translation>
1315         </message>
1316         <message>
1317             <source>SMESH_MESHINFO_ALL_TYPES</source>
1318             <translation>Heterogenous</translation>
1319         </message>
1320         <message>
1321             <source>SMESH_MESHINFO_EDGES</source>
1322             <translation>Edges</translation>
1323         </message>
1324         <message>
1325             <source>SMESH_MESHINFO_ELEMENTS</source>
1326             <translation>Elements</translation>
1327         </message>
1328         <message>
1329             <source>SMESH_MESHINFO_ENTITIES</source>
1330             <translation>Entities</translation>
1331         </message>
1332         <message>
1333             <source>SMESH_MESHINFO_FACES</source>
1334             <translation>Faces</translation>
1335         </message>
1336         <message>
1337             <source>SMESH_MESHINFO_HEXAS</source>
1338             <translation>Hexahedrons</translation>
1339         </message>
1340         <message>
1341             <source>SMESH_MESHINFO_NAME</source>
1342             <translation>Name</translation>
1343         </message>
1344         <message>
1345             <source>SMESH_MESHINFO_NODES</source>
1346             <translation>Nodes</translation>
1347         </message>
1348         <message>
1349             <source>SMESH_MESHINFO_ORDER0</source>
1350             <translation>Total</translation>
1351         </message>
1352         <message>
1353             <source>SMESH_MESHINFO_ORDER1</source>
1354             <translation>Linear</translation>
1355         </message>
1356         <message>
1357             <source>SMESH_MESHINFO_ORDER2</source>
1358             <translation>Quadratic</translation>
1359         </message>
1360         <message>
1361             <source>SMESH_MESHINFO_POLYEDRES</source>
1362             <translation>Polyhedrons</translation>
1363         </message>
1364         <message>
1365             <source>SMESH_MESHINFO_POLYGONES</source>
1366             <translation>Polygons</translation>
1367         </message>
1368         <message>
1369             <source>SMESH_MESHINFO_PRISMS</source>
1370             <translation>Prisms</translation>
1371         </message>
1372         <message>
1373             <source>SMESH_MESHINFO_PYRAS</source>
1374             <translation>Pyramids</translation>
1375         </message>
1376         <message>
1377             <source>SMESH_MESHINFO_QUADRANGLES</source>
1378             <translation>Quadrangles</translation>
1379         </message>
1380         <message>
1381             <source>SMESH_MESHINFO_TETRAS</source>
1382             <translation>Tetrahedrons</translation>
1383         </message>
1384         <message>
1385             <source>SMESH_MESHINFO_TITLE</source>
1386             <translation>Mesh Infos</translation>
1387         </message>
1388         <message>
1389             <source>SMESH_MESHINFO_TOTAL</source>
1390             <translation>Total</translation>
1391         </message>
1392         <message>
1393             <source>SMESH_MESHINFO_TRIANGLES</source>
1394             <translation>Triangles</translation>
1395         </message>
1396         <message>
1397             <source>SMESH_MESHINFO_TYPE</source>
1398             <translation>Type</translation>
1399         </message>
1400         <message>
1401             <source>SMESH_MESHINFO_VOLUMES</source>
1402             <translation>Volumes</translation>
1403         </message>
1404         <message>
1405             <source>SMESH_MIN</source>
1406             <translation>Min</translation>
1407         </message>
1408         <message>
1409             <source>SMESH_MOVE</source>
1410             <translation>Move</translation>
1411         </message>
1412         <message>
1413             <source>SMESH_MOVE_ELEMENTS</source>
1414             <translation>Move Elements</translation>
1415         </message>
1416         <message>
1417             <source>SMESH_MOVE_NODES_TITLE</source>
1418             <translation>Move Node</translation>
1419         </message>
1420         <message>
1421             <source>SMESH_NAME</source>
1422             <translation>Name</translation>
1423         </message>
1424         <message>
1425             <source>SMESH_NODES</source>
1426             <translation>Nodes</translation>
1427         </message>
1428         <message>
1429             <source>SMESH_NONMANIFOLDEDGES</source>
1430             <translation>Non Manifold Edges</translation>
1431         </message>
1432         <message>
1433             <source>SMESH_NORMAL</source>
1434             <translation>Normal</translation>
1435         </message>
1436         <message>
1437             <source>SMESH_NO_MESH_VISUALIZATION</source>
1438             <translation>There is not enough memory to show the mesh</translation>
1439         </message>
1440         <message>
1441             <source>SMESH_NUMBEROFCOLORS</source>
1442             <translation>Nb of colors:</translation>
1443         </message>
1444         <message>
1445             <source>SMESH_NUMBEROFLABELS</source>
1446             <translation>Nb of labels:</translation>
1447         </message>
1448         <message>
1449             <source>SMESH_NUMBEROFSTEPS</source>
1450             <translation>Number of steps:</translation>
1451         </message>
1452         <message>
1453             <source>SMESH_OBJECTS_SELECTED</source>
1454             <translation>%1_objects</translation>
1455         </message>
1456         <message>
1457             <source>SMESH_OBJECT_ALGORITHM</source>
1458             <translation>Algorithm</translation>
1459         </message>
1460         <message>
1461             <source>SMESH_OBJECT_GEOM</source>
1462             <translation>Geometrical Object</translation>
1463         </message>
1464         <message>
1465             <source>SMESH_OBJECT_HYPOTHESIS</source>
1466             <translation>Hypothesis</translation>
1467         </message>
1468         <message>
1469             <source>SMESH_OBJECT_MESH</source>
1470             <translation>Mesh</translation>
1471         </message>
1472         <message>
1473             <source>SMESH_OBJECT_MESHorSUBMESH</source>
1474             <translation>Mesh or SubMesh</translation>
1475         </message>
1476         <message>
1477             <source>SMESH_OPERATION_FAILED</source>
1478             <translation>Operation failed</translation>
1479         </message>
1480         <message>
1481             <source>SMESH_ORIENTATION</source>
1482             <translation>Orientation</translation>
1483         </message>
1484         <message>
1485             <source>SMESH_ORIENTATION_ELEMENTS_TITLE</source>
1486             <translation>Change Orientation</translation>
1487         </message>
1488         <message>
1489             <source>SMESH_OUTLINE_COLOR</source>
1490             <translation>Mesh Object Color</translation>
1491         </message>
1492         <message>
1493             <source>SMESH_PARAMETERS</source>
1494             <translation>Parameters</translation>
1495         </message>
1496         <message>
1497             <source>SMESH_PLANE</source>
1498             <translation>Plane</translation>
1499         </message>
1500         <message>
1501             <source>SMESH_POINT</source>
1502             <translation>Point</translation>
1503         </message>
1504         <message>
1505             <source>SMESH_POINT_1</source>
1506             <translation>Point 1</translation>
1507         </message>
1508         <message>
1509             <source>SMESH_POINT_2</source>
1510             <translation>Point 2</translation>
1511         </message>
1512         <message>
1513             <source>SMESH_POLYEDRE_CREATE_ERROR</source>
1514             <translation>Polyedron creation error</translation>
1515         </message>
1516         <message>
1517             <source>SMESH_POLYEDRON</source>
1518             <translation>Polyhedron</translation>
1519         </message>
1520         <message>
1521             <source>SMESH_POLYGON</source>
1522             <translation>Polygon</translation>
1523         </message>
1524         <message>
1525             <source>SMESH_POSITION_SIZE_SCALARBAR</source>
1526             <translation>Origin &amp;&amp; Size</translation>
1527         </message>
1528         <message>
1529             <source>SMESH_PRECISION</source>
1530             <translation>Precision</translation>
1531         </message>
1532         <message>
1533             <source>SMESH_PREFERENCES_SCALARBAR</source>
1534             <translation>Scalar Bar Preferences</translation>
1535         </message>
1536         <message>
1537             <source>SMESH_PREF_SELECTION</source>
1538             <translation>Preferences - Selection</translation>
1539         </message>
1540         <message>
1541             <source>SMESH_PRESELECTION</source>
1542             <translation>Preselection</translation>
1543         </message>
1544         <message>
1545             <source>SMESH_PRISM</source>
1546             <translation>Prism</translation>
1547         </message>
1548         <message>
1549             <source>SMESH_PROPERTIES_SCALARBAR</source>
1550             <translation>Scalar Bar Properties</translation>
1551         </message>
1552         <message>
1553             <source>SMESH_PYRAMID</source>
1554             <translation>Pyramid</translation>
1555         </message>
1556         <message>
1557             <source>SMESH_QUADRANGLE</source>
1558             <translation>Quadrangle</translation>
1559         </message>
1560         <message>
1561             <source>SMESH_QUADRATIC_EDGE</source>
1562             <translation>Quadratic Edge</translation>
1563         </message>
1564         <message>
1565             <source>SMESH_QUADRATIC_HEXAHEDRON</source>
1566             <translation>Quadratic Hexahedron</translation>
1567         </message>
1568         <message>
1569             <source>SMESH_QUADRATIC_PENTAHEDRON</source>
1570             <translation>Quadratic Pentahedron</translation>
1571         </message>
1572         <message>
1573             <source>SMESH_QUADRATIC_PYRAMID</source>
1574             <translation>Quadratic Pyramid</translation>
1575         </message>
1576         <message>
1577             <source>SMESH_QUADRATIC_QUADRANGLE</source>
1578             <translation>Quadratic Quadrangle</translation>
1579         </message>
1580         <message>
1581             <source>SMESH_QUADRATIC_TETRAHEDRON</source>
1582             <translation>Quadratic Tetrahedron</translation>
1583         </message>
1584         <message>
1585             <source>SMESH_QUADRATIC_TRIANGLE</source>
1586             <translation>Quadratic Triangle</translation>
1587         </message>
1588         <message>
1589             <source>SMESH_RANGE_MAX</source>
1590             <translation>Max value:</translation>
1591         </message>
1592         <message>
1593             <source>SMESH_RANGE_MIN</source>
1594             <translation>Min value:</translation>
1595         </message>
1596         <message>
1597             <source>SMESH_RANGE_SCALARBAR</source>
1598             <translation>Scalar Range</translation>
1599         </message>
1600         <message>
1601             <source>SMESH_REALLY_DELETE</source>
1602             <translation>Do you really want to delete object(s) ?</translation>
1603         </message>
1604         <message>
1605             <source>SMESH_REMOVE</source>
1606             <translation>Remove</translation>
1607         </message>
1608         <message>
1609             <source>SMESH_REMOVE_ELEMENTS_TITLE</source>
1610             <translation>Remove Elements</translation>
1611         </message>
1612         <message>
1613             <source>SMESH_REMOVE_NODES_TITLE</source>
1614             <translation>Remove Nodes</translation>
1615         </message>
1616         <message>
1617             <source>SMESH_RENUMBERING</source>
1618             <translation>Renumbering</translation>
1619         </message>
1620         <message>
1621             <source>SMESH_RENUMBERING_ELEMENTS_TITLE</source>
1622             <translation>Renumbering elements</translation>
1623         </message>
1624         <message>
1625             <source>SMESH_RENUMBERING_NODES_TITLE</source>
1626             <translation>Renumbering nodes</translation>
1627         </message>
1628         <message>
1629             <source>SMESH_REVERSE</source>
1630             <translation>Reverse</translation>
1631         </message>
1632         <message>
1633             <source>SMESH_REVOLUTION</source>
1634             <translation>Revolution</translation>
1635         </message>
1636         <message>
1637             <source>SMESH_RM_HYP_WRN</source>
1638             <translation>"%1" unassigned but:
1639 </translation>
1640         </message>
1641         <message>
1642             <source>SMESH_ROTATION</source>
1643             <translation>Rotation</translation>
1644         </message>
1645         <message>
1646             <source>SMESH_ROTATION_TITLE</source>
1647             <translation>Rotation about an axis</translation>
1648         </message>
1649         <message>
1650             <source>SMESH_SCALARBAR</source>
1651             <translation>Scalar Bar</translation>
1652         </message>
1653         <message>
1654             <source>SMESH_SEGMENTS</source>
1655             <translation>Segments</translation>
1656         </message>
1657         <message>
1658             <source>SMESH_SELECTION</source>
1659             <translation>Selection</translation>
1660         </message>
1661         <message>
1662             <source>SMESH_SELECT_FROM</source>
1663             <translation>Select From</translation>
1664         </message>
1665         <message>
1666             <source>SMESH_SELECT_WHOLE_MESH</source>
1667             <translation>Select whole mesh, submesh or group</translation>
1668         </message>
1669         <message>
1670             <source>SMESH_SET_COLOR</source>
1671             <translation>Color group</translation>
1672         </message>
1673         <message>
1674             <source>SMESH_SEWING</source>
1675             <translation>Sewing</translation>
1676         </message>
1677         <message>
1678             <source>SMESH_SMOOTHING</source>
1679             <translation>Smoothing</translation>
1680         </message>
1681         <message>
1682             <source>SMESH_STANDARD_MESHINFO_TITLE</source>
1683             <translation>Standard Mesh Infos</translation>
1684         </message>
1685         <message>
1686             <source>SMESH_SUBMESH</source>
1687             <translation>SubMesh</translation>
1688         </message>
1689         <message>
1690             <source>SMESH_SUBMESH_SELECTED</source>
1691             <translation>%1 SubMeshes</translation>
1692         </message>
1693         <message>
1694             <source>SMESH_SYMMETRY</source>
1695             <translation>Symmetry</translation>
1696         </message>
1697         <message>
1698             <source>SMESH_TETRAS</source>
1699             <translation>Tetrahedron</translation>
1700         </message>
1701         <message>
1702             <source>SMESH_TITLE</source>
1703             <translation>Title:</translation>
1704         </message>
1705         <message>
1706             <source>SMESH_TOLERANCE</source>
1707             <translation>Tolerance</translation>
1708         </message>
1709         <message>
1710             <source>SMESH_TRANSLATION</source>
1711             <translation>Translation</translation>
1712         </message>
1713         <message>
1714             <source>SMESH_TRANSPARENCY_OPAQUE</source>
1715             <translation>---> Opaque</translation>
1716         </message>
1717         <message>
1718             <source>SMESH_TRANSPARENCY_TITLE</source>
1719             <translation>Change Transparency</translation>
1720         </message>
1721         <message>
1722             <source>SMESH_TRANSPARENCY_TRANSPARENT</source>
1723             <translation>Transparent &lt;---</translation>
1724         </message>
1725         <message>
1726             <source>SMESH_TRIANGLE</source>
1727             <translation>Triangle</translation>
1728         </message>
1729         <message>
1730             <source>SMESH_UPDATEVIEW</source>
1731             <translation>Update View</translation>
1732         </message>
1733         <message>
1734             <source>SMESH_VALUE</source>
1735             <translation>Value</translation>
1736         </message>
1737         <message>
1738             <source>SMESH_VECTOR</source>
1739             <translation>Vector</translation>
1740         </message>
1741         <message>
1742             <source>SMESH_VERTICAL</source>
1743             <translation>Vertical</translation>
1744         </message>
1745         <message>
1746             <source>SMESH_VISU_PROBLEM</source>
1747             <translation>Mesh visualization failed, probably due to lack of memory</translation>
1748         </message>
1749         <message>
1750             <source>SMESH_VISU_PROBLEM_CLEAR</source>
1751             <translation>Mesh visualization failed, no memory even to show a message,
1752 so all visual data have been removed to let the application live.
1753 Consider saving your work before application crash</translation>
1754         </message>
1755         <message>
1756             <source>SMESH_VOLUME</source>
1757             <translation>Volume</translation>
1758         </message>
1759         <message>
1760             <source>SMESH_WARNING</source>
1761             <translation>Warning</translation>
1762         </message>
1763         <message>
1764             <source>SMESH_WHAT_IS_TITLE</source>
1765             <translation>Mesh Element Info</translation>
1766         </message>
1767         <message>
1768             <source>SMESH_WIDTH</source>
1769             <translation>Width:</translation>
1770         </message>
1771         <message>
1772             <source>SMESH_WRN_ALGORITHM_ALREADYEXIST</source>
1773             <translation>Algorithm already exists</translation>
1774         </message>
1775         <message>
1776             <source>SMESH_WRN_COMPUTE_FAILED</source>
1777             <translation>Mesh computation failed</translation>
1778         </message>
1779         <message>
1780             <source>SMESH_WRN_EMPTY_NAME</source>
1781             <translation>Empty name is not valid</translation>
1782         </message>
1783         <message>
1784             <source>SMESH_WRN_HYPOTHESIS_ALREADYEXIST</source>
1785             <translation>Hypothesis already exists</translation>
1786         </message>
1787         <message>
1788             <source>SMESH_WRN_HYPOTHESIS_NOTEXIST</source>
1789             <translation>Hypothesis or Algorithm not exists</translation>
1790         </message>
1791         <message>
1792             <source>SMESH_WRN_MISSING_PARAMETERS</source>
1793             <translation>Missing parameters</translation>
1794         </message>
1795         <message>
1796             <source>SMESH_WRN_NO_AVAILABLE_DATA</source>
1797             <translation>No available data in selection</translation>
1798         </message>
1799         <message>
1800             <source>SMESH_WRN_SELECTIONMODE_DIAGONAL</source>
1801             <translation>Activate Link Selection Mode</translation>
1802         </message>
1803         <message>
1804             <source>SMESH_WRN_SELECTIONMODE_ELEMENTS</source>
1805             <translation>Activate Elements Selection Mode</translation>
1806         </message>
1807         <message>
1808             <source>SMESH_WRN_SELECTIONMODE_NODES</source>
1809             <translation>Activate Nodes Selection Mode</translation>
1810         </message>
1811         <message>
1812             <source>SMESH_WRN_VIEWER_VTK</source>
1813             <translation>Study frame with VTK Viewer must be activated</translation>
1814         </message>
1815         <message>
1816             <source>SMESH_WRN_WARNING</source>
1817             <translation>Warning</translation>
1818         </message>
1819         <message>
1820             <source>SMESH_X</source>
1821             <translation>X</translation>
1822         </message>
1823         <message>
1824             <source>SMESH_X_SCALARBAR</source>
1825             <translation>X:</translation>
1826         </message>
1827         <message>
1828             <source>SMESH_Y</source>
1829             <translation>Y</translation>
1830         </message>
1831         <message>
1832             <source>SMESH_Y_SCALARBAR</source>
1833             <translation>Y:</translation>
1834         </message>
1835         <message>
1836             <source>SMESH_Z</source>
1837             <translation>Z</translation>
1838         </message>
1839         <message>
1840             <source>STATE_ALGO_MISSING</source>
1841             <translation>%3 %2D algorithm is missing</translation>
1842         </message>
1843         <message>
1844             <source>STATE_HYP_BAD_GEOMETRY</source>
1845             <translation>%3 %2D algorithm "%1" is assigned to geometry mismatching its expectation</translation>
1846         </message>
1847         <message>
1848             <source>STATE_HYP_BAD_PARAMETER</source>
1849             <translation>Hypothesis of %3 %2D algorithm "%1" has a bad parameter value</translation>
1850         </message>
1851         <message>
1852             <source>STATE_HYP_MISSING</source>
1853             <translation>%3 %2D algorithm "%1" misses %4D hypothesis</translation>
1854         </message>
1855         <message>
1856             <source>STATE_HYP_NOTCONFORM</source>
1857             <translation>%3 %2D algorithm "%1" would produce not conform mesh: global "Not Conform Mesh Allowed" hypotesis is missing</translation>
1858         </message>
1859         <message>
1860             <source>STB_ADV_INFO</source>
1861             <translation>Advanced Mesh Infos</translation>
1862         </message>
1863         <message>
1864             <source>STB_ALL</source>
1865             <translation>All</translation>
1866         </message>
1867         <message>
1868             <source>STB_AREA</source>
1869             <translation>Area</translation>
1870         </message>
1871         <message>
1872             <source>STB_ASPECT</source>
1873             <translation>Aspect Ratio</translation>
1874         </message>
1875         <message>
1876             <source>STB_ASPECT_3D</source>
1877             <translation>Aspect Ratio 3D</translation>
1878         </message>
1879         <message>
1880             <source>STB_AUTO_COLOR</source>
1881             <translation>Auto color</translation>
1882         </message>
1883         <message>
1884             <source>STB_AUTO_UPD</source>
1885             <translation>Automatic update</translation>
1886         </message>
1887         <message>
1888             <source>STB_BUILD_COMPOUND</source>
1889             <translation>Build Compound Mesh</translation>
1890         </message>
1891         <message>
1892             <source>STB_CLIP</source>
1893             <translation>Clipping</translation>
1894         </message>
1895         <message>
1896             <source>STB_COLORS</source>
1897             <translation>Colors / Size</translation>
1898         </message>
1899         <message>
1900             <source>STB_COMPUTE</source>
1901             <translation>Compute</translation>
1902         </message>
1903         <message>
1904             <source>STB_CONNECTION</source>
1905             <translation>Borders at Multi-Connection</translation>
1906         </message>
1907         <message>
1908             <source>STB_CONNECTION_2D</source>
1909             <translation>Borders at Multi-Connection 2D</translation>
1910         </message>
1911         <message>
1912             <source>STB_CONSTRUCT_GROUP</source>
1913             <translation>Construct Group</translation>
1914         </message>
1915         <message>
1916             <source>STB_CONV_TO_QUAD</source>
1917             <translation>Convert to/from quadratic</translation>
1918         </message>
1919         <message>
1920             <source>STB_CREATE_GROUP</source>
1921             <translation>Create Group</translation>
1922         </message>
1923         <message>
1924             <source>STB_CREATE_MESH</source>
1925             <translation>Create Mesh</translation>
1926         </message>
1927         <message>
1928             <source>STB_CREATE_SUBMESH</source>
1929             <translation>Create Sub-mesh</translation>
1930         </message>
1931         <message>
1932             <source>STB_CUT</source>
1933             <translation>Cutting of quadrangles</translation>
1934         </message>
1935         <message>
1936             <source>STB_CUT_GROUP</source>
1937             <translation>Cut Groups</translation>
1938         </message>
1939         <message>
1940             <source>STB_DAT</source>
1941             <translation>Import DAT file</translation>
1942         </message>
1943         <message>
1944             <source>STB_DELETE</source>
1945             <translation>Delete</translation>
1946         </message>
1947         <message>
1948             <source>STB_DEL_GROUP</source>
1949             <translation>Delete Groups</translation>
1950         </message>
1951         <message>
1952             <source>STB_FACE_ORIENTATION</source>
1953             <translation>Orientation of faces</translation>
1954         </message>
1955         <message>
1956             <source>STB_DISABLE_AUTO_COLOR</source>
1957             <translation>Disable auto color</translation>
1958         </message>
1959         <message>
1960             <source>STB_DISPLAY_ONLY</source>
1961             <translation>Show only</translation>
1962         </message>
1963         <message>
1964             <source>STB_DISP_ENT</source>
1965             <translation>Display entity</translation>
1966         </message>
1967         <message>
1968             <source>STB_EDGE</source>
1969             <translation>Edge</translation>
1970         </message>
1971         <message>
1972             <source>STB_EDGES</source>
1973             <translation>Edges</translation>
1974         </message>
1975         <message>
1976             <source>STB_EDIT_GROUP</source>
1977             <translation>Edit Group</translation>
1978         </message>
1979         <message>
1980             <source>STB_EDIT_HYPO</source>
1981             <translation>Edit Hypothesis</translation>
1982         </message>
1983         <message>
1984             <source>STB_EDIT_MESHSUBMESH</source>
1985             <translation>Edit Mesh/Sub-mesh</translation>
1986         </message>
1987         <message>
1988             <source>STB_EXPORT_DAT</source>
1989             <translation>Export to DAT file</translation>
1990         </message>
1991         <message>
1992             <source>STB_EXPORT_MED</source>
1993             <translation>Export to MED file</translation>
1994         </message>
1995         <message>
1996             <source>STB_EXPORT_STL</source>
1997             <translation>Export to STL file</translation>
1998         </message>
1999         <message>
2000             <source>STB_EXPORT_UNV</source>
2001             <translation>Export to UNV file</translation>
2002         </message>
2003         <message>
2004             <source>STB_EXTRUSION</source>
2005             <translation>Extrusion</translation>
2006         </message>
2007         <message>
2008             <source>STB_EXTRUSION_ALONG</source>
2009             <translation>Extrusion along a path</translation>
2010         </message>
2011         <message>
2012             <source>STB_FACES</source>
2013             <translation>Faces</translation>
2014         </message>
2015         <message>
2016             <source>STB_FREE_BORDER</source>
2017             <translation>Free Borders</translation>
2018         </message>
2019         <message>
2020             <source>STB_FREE_EDGE</source>
2021             <translation>Free Edges</translation>
2022         </message>
2023         <message>
2024             <source>STB_GLOBAL_HYPO</source>
2025             <translation>Global Hypothesis</translation>
2026         </message>
2027         <message>
2028             <source>STB_HEXA</source>
2029             <translation>Hexahedron</translation>
2030         </message>
2031         <message>
2032             <source>STB_HIDE</source>
2033             <translation>Hide</translation>
2034         </message>
2035         <message>
2036             <source>STB_INT_GROUP</source>
2037             <translation>Intersect Groups</translation>
2038         </message>
2039         <message>
2040             <source>STB_INV</source>
2041             <translation>Diagonal Inversion</translation>
2042         </message>
2043         <message>
2044             <source>STB_LENGTH</source>
2045             <translation>Length</translation>
2046         </message>
2047         <message>
2048             <source>STB_LENGTH_2D</source>
2049             <translation>Length 2D</translation>
2050         </message>
2051         <message>
2052             <source>STB_MAP</source>
2053             <translation>Pattern mapping</translation>
2054         </message>
2055         <message>
2056             <source>STB_MED</source>
2057             <translation>Import MED file</translation>
2058         </message>
2059         <message>
2060             <source>STB_MERGE</source>
2061             <translation>Merge nodes</translation>
2062         </message>
2063         <message>
2064             <source>STB_MERGE_ELEMENTS</source>
2065             <translation>Merge elements</translation>
2066         </message>
2067         <message>
2068             <source>STB_MESH_THROU_POINT</source>
2069             <translation>Mesh to pass through a point</translation>
2070         </message>
2071         <message>
2072             <source>STB_MIN_ANG</source>
2073             <translation>Minimum Angle</translation>
2074         </message>
2075         <message>
2076             <source>STB_MOVE</source>
2077             <translation>Move Node</translation>
2078         </message>
2079         <message>
2080             <source>STB_NODE</source>
2081             <translation>Node</translation>
2082         </message>
2083         <message>
2084             <source>STB_NODES</source>
2085             <translation>Nodes</translation>
2086         </message>
2087         <message>
2088             <source>STB_NUM_ELEMENTS</source>
2089             <translation>Display Elements</translation>
2090         </message>
2091         <message>
2092             <source>STB_NUM_NODES</source>
2093             <translation>Display Nodes</translation>
2094         </message>
2095         <message>
2096             <source>STB_ORIENT</source>
2097             <translation>Orientation</translation>
2098         </message>
2099         <message>
2100             <source>STB_POLYGON</source>
2101             <translation>Polygon</translation>
2102         </message>
2103         <message>
2104             <source>STB_POLYHEDRON</source>
2105             <translation>Polyhedron</translation>
2106         </message>
2107         <message>
2108             <source>STB_PRECISION</source>
2109             <translation>Precision</translation>
2110         </message>
2111         <message>
2112             <source>STB_QUAD</source>
2113             <translation>Quadrangle</translation>
2114         </message>
2115         <message>
2116             <source>STB_QUADRATIC_EDGE</source>
2117             <translation>Quadratic Edge</translation>
2118         </message>
2119         <message>
2120             <source>STB_QUADRATIC_HEXAHEDRON</source>
2121             <translation>Quadratic Hexahedron</translation>
2122         </message>
2123         <message>
2124             <source>STB_QUADRATIC_PENTAHEDRON</source>
2125             <translation>Quadratic Pentahedron</translation>
2126         </message>
2127         <message>
2128             <source>STB_QUADRATIC_PYRAMID</source>
2129             <translation>Quadratic Pyramid</translation>
2130         </message>
2131         <message>
2132             <source>STB_QUADRATIC_QUADRANGLE</source>
2133             <translation>Quadratic Quadrangle</translation>
2134         </message>
2135         <message>
2136             <source>STB_QUADRATIC_TETRAHEDRON</source>
2137             <translation>Quadratic Tetrahedron</translation>
2138         </message>
2139         <message>
2140             <source>STB_QUADRATIC_TRIANGLE</source>
2141             <translation>Quadratic Triangle</translation>
2142         </message>
2143         <message>
2144             <source>STB_REMOVE_ELEMENTS</source>
2145             <translation>Remove elements</translation>
2146         </message>
2147         <message>
2148             <source>STB_REMOVE_NODES</source>
2149             <translation>Remove nodes</translation>
2150         </message>
2151         <message>
2152             <source>STB_RENAME</source>
2153             <translation>Rename</translation>
2154         </message>
2155         <message>
2156             <source>STB_RENUM_ELEMENTS</source>
2157             <translation>Renumbering elements</translation>
2158         </message>
2159         <message>
2160             <source>STB_RENUM_NODES</source>
2161             <translation>Renumbering nodes</translation>
2162         </message>
2163         <message>
2164             <source>STB_RESET</source>
2165             <translation>Reset</translation>
2166         </message>
2167         <message>
2168             <source>STB_REVOLUTION</source>
2169             <translation>Revolution</translation>
2170         </message>
2171         <message>
2172             <source>STB_ROT</source>
2173             <translation>Rotation</translation>
2174         </message>
2175         <message>
2176             <source>STB_SCALAR_BAR</source>
2177             <translation>Scalar bar</translation>
2178         </message>
2179         <message>
2180             <source>STB_SCALAR_BAR_PROP</source>
2181             <translation>Scalar bar Properties</translation>
2182         </message>
2183         <message>
2184             <source>STB_SELECTION</source>
2185             <translation>Selection</translation>
2186         </message>
2187         <message>
2188             <source>STB_SEL_FILTER_LIB</source>
2189             <translation>Selection filters library</translation>
2190         </message>
2191         <message>
2192             <source>STB_SEW</source>
2193             <translation>Sewing</translation>
2194         </message>
2195         <message>
2196             <source>STB_SHADE</source>
2197             <translation>Shading</translation>
2198         </message>
2199         <message>
2200             <source>STB_SHOW</source>
2201             <translation>Show</translation>
2202         </message>
2203         <message>
2204             <source>STB_SHRINK</source>
2205             <translation>Shrink</translation>
2206         </message>
2207         <message>
2208             <source>STB_SKEW</source>
2209             <translation>Skew</translation>
2210         </message>
2211         <message>
2212             <source>STB_SMOOTH</source>
2213             <translation>Smoothing</translation>
2214         </message>
2215         <message>
2216             <source>STB_STD_INFO</source>
2217             <translation>Standard Mesh Infos</translation>
2218         </message>
2219         <message>
2220             <source>STB_SYM</source>
2221             <translation>Symmetry</translation>
2222         </message>
2223         <message>
2224             <source>STB_TAPER</source>
2225             <translation>Taper</translation>
2226         </message>
2227         <message>
2228             <source>STB_TETRA</source>
2229             <translation>Tetrahedron</translation>
2230         </message>
2231         <message>
2232             <source>STB_TRANS</source>
2233             <translation>Translation</translation>
2234         </message>
2235         <message>
2236             <source>STB_TRANSP</source>
2237             <translation>Transparency</translation>
2238         </message>
2239         <message>
2240             <source>STB_TRIANGLE</source>
2241             <translation>Triangle</translation>
2242         </message>
2243         <message>
2244             <source>STB_UNASSIGN</source>
2245             <translation>Unassign</translation>
2246         </message>
2247         <message>
2248             <source>STB_UNION</source>
2249             <translation>Union of triangles</translation>
2250         </message>
2251         <message>
2252             <source>STB_UNION2</source>
2253             <translation>Union of two triangles</translation>
2254         </message>
2255         <message>
2256             <source>STB_UNV</source>
2257             <translation>Import UNV file</translation>
2258         </message>
2259         <message>
2260             <source>STB_UN_GROUP</source>
2261             <translation>Union Groups</translation>
2262         </message>
2263         <message>
2264             <source>STB_UPDATE</source>
2265             <translation>Update</translation>
2266         </message>
2267         <message>
2268             <source>STB_VOLUMES</source>
2269             <translation>Volumes</translation>
2270         </message>
2271         <message>
2272             <source>STB_VOLUME_3D</source>
2273             <translation>Volume</translation>
2274         </message>
2275         <message>
2276             <source>STB_WARP</source>
2277             <translation>Warping angle</translation>
2278         </message>
2279         <message>
2280             <source>STB_WHAT_IS</source>
2281             <translation>Mesh Element Info</translation>
2282         </message>
2283         <message>
2284             <source>STB_WIRE</source>
2285             <translation>Wireframe</translation>
2286         </message>
2287         <message>
2288             <source>TAPER_ELEMENTS</source>
2289             <translation>Taper</translation>
2290         </message>
2291         <message>
2292             <source>TB_ADD_REMOVE</source>
2293             <translation>Add/Remove Toolbar</translation>
2294         </message>
2295         <message>
2296             <source>TB_CTRL</source>
2297             <translation>Controls Toolbar</translation>
2298         </message>
2299         <message>
2300             <source>TB_DISP_MODE</source>
2301             <translation>Display Mode Toolbar</translation>
2302         </message>
2303         <message>
2304             <source>TB_HYPO</source>
2305             <translation>Hypotheses Toolbar</translation>
2306         </message>
2307         <message>
2308             <source>TB_MESH</source>
2309             <translation>Mesh Toolbar</translation>
2310         </message>
2311         <message>
2312             <source>TB_MODIFY</source>
2313             <translation>Modification Toolbar</translation>
2314         </message>
2315         <message>
2316             <source>TOP_ADV_INFO</source>
2317             <translation>Advanced Mesh Infos</translation>
2318         </message>
2319         <message>
2320             <source>TOP_ALL</source>
2321             <translation>All</translation>
2322         </message>
2323         <message>
2324             <source>TOP_AREA</source>
2325             <translation>Area</translation>
2326         </message>
2327         <message>
2328             <source>TOP_ASPECT</source>
2329             <translation>Aspect Ratio</translation>
2330         </message>
2331         <message>
2332             <source>TOP_ASPECT_3D</source>
2333             <translation>Aspect Ratio 3D</translation>
2334         </message>
2335         <message>
2336             <source>TOP_AUTO_COLOR</source>
2337             <translation>Auto color</translation>
2338         </message>
2339         <message>
2340             <source>TOP_AUTO_UPD</source>
2341             <translation>Automatic update</translation>
2342         </message>
2343         <message>
2344             <source>TOP_BUILD_COMPOUND</source>
2345             <translation>Build Compound Mesh</translation>
2346         </message>
2347         <message>
2348             <source>TOP_CLIP</source>
2349             <translation>Clipping</translation>
2350         </message>
2351         <message>
2352             <source>TOP_COLORS</source>
2353             <translation>Colors / Size</translation>
2354         </message>
2355         <message>
2356             <source>TOP_COMPUTE</source>
2357             <translation>Compute</translation>
2358         </message>
2359         <message>
2360             <source>TOP_CONNECTION</source>
2361             <translation>Borders at Multi-Connection</translation>
2362         </message>
2363         <message>
2364             <source>TOP_CONNECTION_2D</source>
2365             <translation>Borders at Multi-Connection 2D</translation>
2366         </message>
2367         <message>
2368             <source>TOP_CONSTRUCT_GROUP</source>
2369             <translation>Construct Group</translation>
2370         </message>
2371         <message>
2372             <source>TOP_CONV_TO_QUAD</source>
2373             <translation>Convert to/from quadratic</translation>
2374         </message>
2375         <message>
2376             <source>TOP_CREATE_GROUP</source>
2377             <translation>Create Group</translation>
2378         </message>
2379         <message>
2380             <source>TOP_CREATE_MESH</source>
2381             <translation>Create Mesh</translation>
2382         </message>
2383         <message>
2384             <source>TOP_CREATE_SUBMESH</source>
2385             <translation>Create Sub-mesh</translation>
2386         </message>
2387         <message>
2388             <source>TOP_CUT</source>
2389             <translation>Cutting of quadrangles</translation>
2390         </message>
2391         <message>
2392             <source>TOP_CUT_GROUP</source>
2393             <translation>Cut Groups</translation>
2394         </message>
2395         <message>
2396             <source>TOP_DAT</source>
2397             <translation>Import DAT file</translation>
2398         </message>
2399         <message>
2400             <source>TOP_DELETE</source>
2401             <translation>Delete</translation>
2402         </message>
2403         <message>
2404             <source>TOP_DEL_GROUP</source>
2405             <translation>Delete Groups</translation>
2406         </message>
2407         <message>
2408             <source>TOP_FACE_ORIENTATION</source>
2409             <translation>Orientation of faces</translation>
2410         </message>
2411         <message>
2412             <source>TOP_DISABLE_AUTO_COLOR</source>
2413             <translation>Disable auto color</translation>
2414         </message>
2415         <message>
2416             <source>TOP_DISPLAY_ONLY</source>
2417             <translation>Show only</translation>
2418         </message>
2419         <message>
2420             <source>TOP_DISP_ENT</source>
2421             <translation>Display entity</translation>
2422         </message>
2423         <message>
2424             <source>TOP_EDGE</source>
2425             <translation>Edge</translation>
2426         </message>
2427         <message>
2428             <source>TOP_EDGES</source>
2429             <translation>Edges</translation>
2430         </message>
2431         <message>
2432             <source>TOP_EDIT_GROUP</source>
2433             <translation>Edit Group</translation>
2434         </message>
2435         <message>
2436             <source>TOP_EDIT_HYPO</source>
2437             <translation>Edit Hypothesis</translation>
2438         </message>
2439         <message>
2440             <source>TOP_EDIT_MESHSUBMESH</source>
2441             <translation>Edit Mesh/Sub-mesh</translation>
2442         </message>
2443         <message>
2444             <source>TOP_EXPORT_DAT</source>
2445             <translation>Export to DAT file</translation>
2446         </message>
2447         <message>
2448             <source>TOP_EXPORT_MED</source>
2449             <translation>Export to MED file</translation>
2450         </message>
2451         <message>
2452             <source>TOP_EXPORT_STL</source>
2453             <translation>Export to STL file</translation>
2454         </message>
2455         <message>
2456             <source>TOP_EXPORT_UNV</source>
2457             <translation>Export to UNV file</translation>
2458         </message>
2459         <message>
2460             <source>TOP_EXTRUSION</source>
2461             <translation>Extrusion</translation>
2462         </message>
2463         <message>
2464             <source>TOP_EXTRUSION_ALONG</source>
2465             <translation>Extrusion along a path</translation>
2466         </message>
2467         <message>
2468             <source>TOP_FACES</source>
2469             <translation>Faces</translation>
2470         </message>
2471         <message>
2472             <source>TOP_FREE_BORDER</source>
2473             <translation>Free Borders</translation>
2474         </message>
2475         <message>
2476             <source>TOP_FREE_EDGE</source>
2477             <translation>Free Edges</translation>
2478         </message>
2479         <message>
2480             <source>TOP_GLOBAL_HYPO</source>
2481             <translation>Global Hypothesis</translation>
2482         </message>
2483         <message>
2484             <source>TOP_HEXA</source>
2485             <translation>Hexahedron</translation>
2486         </message>
2487         <message>
2488             <source>TOP_HIDE</source>
2489             <translation>Hide</translation>
2490         </message>
2491         <message>
2492             <source>TOP_INT_GROUP</source>
2493             <translation>Intersect Groups</translation>
2494         </message>
2495         <message>
2496             <source>TOP_INV</source>
2497             <translation>Diagonal Inversion</translation>
2498         </message>
2499         <message>
2500             <source>TOP_LENGTH</source>
2501             <translation>Length</translation>
2502         </message>
2503         <message>
2504             <source>TOP_LENGTH_2D</source>
2505             <translation>Length 2D</translation>
2506         </message>
2507         <message>
2508             <source>TOP_MAP</source>
2509             <translation>Pattern mapping</translation>
2510         </message>
2511         <message>
2512             <source>TOP_MED</source>
2513             <translation>Import MED file</translation>
2514         </message>
2515         <message>
2516             <source>TOP_MERGE</source>
2517             <translation>Merge nodes</translation>
2518         </message>
2519         <message>
2520             <source>TOP_MERGE_ELEMENTS</source>
2521             <translation>Merge elements</translation>
2522         </message>
2523         <message>
2524             <source>TOP_MESH_THROU_POINT</source>
2525             <translation>Mesh to pass through a point</translation>
2526         </message>
2527         <message>
2528             <source>TOP_MIN_ANG</source>
2529             <translation>Minimum Angle</translation>
2530         </message>
2531         <message>
2532             <source>TOP_MOVE</source>
2533             <translation>Move Node</translation>
2534         </message>
2535         <message>
2536             <source>TOP_NODE</source>
2537             <translation>Node</translation>
2538         </message>
2539         <message>
2540             <source>TOP_NODES</source>
2541             <translation>Nodes</translation>
2542         </message>
2543         <message>
2544             <source>TOP_NUM_ELEMENTS</source>
2545             <translation>Display Elements</translation>
2546         </message>
2547         <message>
2548             <source>TOP_NUM_NODES</source>
2549             <translation>Display Nodes</translation>
2550         </message>
2551         <message>
2552             <source>TOP_ORIENT</source>
2553             <translation>Orientation</translation>
2554         </message>
2555         <message>
2556             <source>TOP_POLYGON</source>
2557             <translation>Polygon</translation>
2558         </message>
2559         <message>
2560             <source>TOP_POLYHEDRON</source>
2561             <translation>Polyhedron</translation>
2562         </message>
2563         <message>
2564             <source>TOP_PRECISION</source>
2565             <translation>Precision</translation>
2566         </message>
2567         <message>
2568             <source>TOP_QUAD</source>
2569             <translation>Quadrangle</translation>
2570         </message>
2571         <message>
2572             <source>TOP_QUADRATIC_EDGE</source>
2573             <translation>Quadratic Edge</translation>
2574         </message>
2575         <message>
2576             <source>TOP_QUADRATIC_HEXAHEDRON</source>
2577             <translation>Quadratic Hexahedron</translation>
2578         </message>
2579         <message>
2580             <source>TOP_QUADRATIC_PENTAHEDRON</source>
2581             <translation>Quadratic Pentahedron</translation>
2582         </message>
2583         <message>
2584             <source>TOP_QUADRATIC_PYRAMID</source>
2585             <translation>Quadratic Pyramid</translation>
2586         </message>
2587         <message>
2588             <source>TOP_QUADRATIC_QUADRANGLE</source>
2589             <translation>Quadratic Quadrangle</translation>
2590         </message>
2591         <message>
2592             <source>TOP_QUADRATIC_TETRAHEDRON</source>
2593             <translation>Quadratic Tetrahedron</translation>
2594         </message>
2595         <message>
2596             <source>TOP_QUADRATIC_TRIANGLE</source>
2597             <translation>Quadratic Triangle</translation>
2598         </message>
2599         <message>
2600             <source>TOP_REMOVE_ELEMENTS</source>
2601             <translation>Remove elements</translation>
2602         </message>
2603         <message>
2604             <source>TOP_REMOVE_NODES</source>
2605             <translation>Remove nodes</translation>
2606         </message>
2607         <message>
2608             <source>TOP_RENAME</source>
2609             <translation>Rename</translation>
2610         </message>
2611         <message>
2612             <source>TOP_RENUM_ELEMENTS</source>
2613             <translation>Renumbering elements</translation>
2614         </message>
2615         <message>
2616             <source>TOP_RENUM_NODES</source>
2617             <translation>Renumbering nodes</translation>
2618         </message>
2619         <message>
2620             <source>TOP_RESET</source>
2621             <translation>Reset</translation>
2622         </message>
2623         <message>
2624             <source>TOP_REVOLUTION</source>
2625             <translation>Revolution</translation>
2626         </message>
2627         <message>
2628             <source>TOP_ROT</source>
2629             <translation>Rotation</translation>
2630         </message>
2631         <message>
2632             <source>TOP_SCALAR_BAR</source>
2633             <translation>Scalar bar</translation>
2634         </message>
2635         <message>
2636             <source>TOP_SCALAR_BAR_PROP</source>
2637             <translation>Scalar bar Properties</translation>
2638         </message>
2639         <message>
2640             <source>TOP_SELECTION</source>
2641             <translation>Selection</translation>
2642         </message>
2643         <message>
2644             <source>TOP_SEL_FILTER_LIB</source>
2645             <translation>Selection filters library</translation>
2646         </message>
2647         <message>
2648             <source>TOP_SEW</source>
2649             <translation>Sewing</translation>
2650         </message>
2651         <message>
2652             <source>TOP_SHADE</source>
2653             <translation>Shading</translation>
2654         </message>
2655         <message>
2656             <source>TOP_SHOW</source>
2657             <translation>Show</translation>
2658         </message>
2659         <message>
2660             <source>TOP_SHRINK</source>
2661             <translation>Shrink</translation>
2662         </message>
2663         <message>
2664             <source>TOP_SKEW</source>
2665             <translation>Skew</translation>
2666         </message>
2667         <message>
2668             <source>TOP_SMOOTH</source>
2669             <translation>Smoothing</translation>
2670         </message>
2671         <message>
2672             <source>TOP_STD_INFO</source>
2673             <translation>Standard Mesh Infos</translation>
2674         </message>
2675         <message>
2676             <source>TOP_SYM</source>
2677             <translation>Symmetry</translation>
2678         </message>
2679         <message>
2680             <source>TOP_TAPER</source>
2681             <translation>Taper</translation>
2682         </message>
2683         <message>
2684             <source>TOP_TETRA</source>
2685             <translation>Tetrahedron</translation>
2686         </message>
2687         <message>
2688             <source>TOP_TRANS</source>
2689             <translation>Translation</translation>
2690         </message>
2691         <message>
2692             <source>TOP_TRANSP</source>
2693             <translation>Transparency</translation>
2694         </message>
2695         <message>
2696             <source>TOP_TRIANGLE</source>
2697             <translation>Triangle</translation>
2698         </message>
2699         <message>
2700             <source>TOP_UNASSIGN</source>
2701             <translation>Unassign</translation>
2702         </message>
2703         <message>
2704             <source>TOP_UNION</source>
2705             <translation>Union of triangles</translation>
2706         </message>
2707         <message>
2708             <source>TOP_UNION2</source>
2709             <translation>Union of two triangles</translation>
2710         </message>
2711         <message>
2712             <source>TOP_UNV</source>
2713             <translation>Import UNV file</translation>
2714         </message>
2715         <message>
2716             <source>TOP_UN_GROUP</source>
2717             <translation>Union Groups</translation>
2718         </message>
2719         <message>
2720             <source>TOP_UPDATE</source>
2721             <translation>Update</translation>
2722         </message>
2723         <message>
2724             <source>TOP_VOLUMES</source>
2725             <translation>Volumes</translation>
2726         </message>
2727         <message>
2728             <source>TOP_VOLUME_3D</source>
2729             <translation>Volume</translation>
2730         </message>
2731         <message>
2732             <source>TOP_WARP</source>
2733             <translation>Warping angle</translation>
2734         </message>
2735         <message>
2736             <source>TOP_WHAT_IS</source>
2737             <translation>Mesh Element Info</translation>
2738         </message>
2739         <message>
2740             <source>TOP_WIRE</source>
2741             <translation>Wireframe</translation>
2742         </message>
2743         <message>
2744             <source>VOLUME_3D_ELEMENTS</source>
2745             <translation>Area</translation>
2746         </message>
2747         <message>
2748             <source>WARP_ELEMENTS</source>
2749             <translation>Warping</translation>
2750         </message>
2751         <message>
2752             <source>MEN_FILE_INFO</source>
2753             <translation>MED file information</translation>
2754         </message>
2755         <message>
2756             <source>SMESH_WRN_NO_APPROPRIATE_SELECTION</source>
2757             <translation>No appropriate objects selected</translation>
2758         </message>
2759         <message>
2760             <source>MEN_CLEAR_MESH</source>
2761             <translation>Clear Mesh Data</translation>
2762         </message>
2763         <message>
2764             <source>TOP_CLEAR_MESH</source>
2765             <translation>Clear Mesh Data</translation>
2766         </message>
2767         <message>
2768             <source>STB_CLEAR_MESH</source>
2769             <translation>Clear Mesh Data</translation>
2770         </message>
2771         <message>
2772             <source>SMESH_IMPORT_MESH</source>
2773             <translation>Import mesh data from files</translation>
2774         </message>
2775         <message>
2776             <source>SMESH_ERR_NOT_SUPPORTED_FORMAT</source>
2777             <translation>Unsupported file format</translation>
2778         </message>
2779         <message>
2780             <source>SMESH_ERR_UNKNOWN_IMPORT_ERROR</source>
2781             <translation>Unknown error</translation>
2782         </message>
2783         <message>
2784             <source>SMESH_IMPORT_ERRORS</source>
2785             <translation>Import operation has finished with errors:</translation>
2786         </message>
2787         <message>
2788             <source>SMESH_DRS_SOME_EMPTY</source>
2789             <translation>One or more mesh files were empty, data has not been published</translation>
2790         </message>
2791     </context>
2792     <context>
2793         <name>SMESHGUI</name>
2794         <message>
2795             <source>NOT_A_VTK_VIEWER</source>
2796             <translation>This command is available in VTK viewer only
2797 Please, create VTK viewer and try again</translation>
2798         </message>
2799         <message>
2800             <source>PREF_AUTO_GROUPS</source>
2801             <translation>Automatically create groups for MED export</translation>
2802         </message>
2803         <message>
2804             <source>PREF_AUTO_UPDATE</source>
2805             <translation>Automatic update</translation>
2806         </message>
2807         <message>
2808             <source>PREF_BACKFACE</source>
2809             <translation>Back face</translation>
2810         </message>
2811         <message>
2812             <source>PREF_COLOR</source>
2813             <translation>Color</translation>
2814         </message>
2815         <message>
2816             <source>PREF_ORIENTATION_COLOR</source>
2817             <translation>Color</translation>
2818         </message>
2819         <message>
2820             <source>PREF_ORIENTATION_3D_VECTORS</source>
2821             <translation>3D vectors</translation>
2822         </message>
2823         <message>
2824             <source>PREF_ORIENTATION_SCALE</source>
2825             <translation>Scale</translation>
2826         </message>
2827         <message>
2828             <source>PREF_DISPLAY_ENTITY</source>
2829             <translation>Display entity</translation>
2830         </message>
2831         <message>
2832             <source>PREF_DISPLAY_MODE</source>
2833             <translation>Display mode</translation>
2834         </message>
2835         <message>
2836             <source>PREF_ELEMENTS</source>
2837             <translation>Elements</translation>
2838         </message>
2839         <message>
2840             <source>PREF_ELEMENT_COLOR</source>
2841             <translation>Element color</translation>
2842         </message>
2843         <message>
2844             <source>PREF_FILL</source>
2845             <translation>Fill</translation>
2846         </message>
2847         <message>
2848             <source>PREF_NOTIFY_MODE</source>
2849             <translation>Show a computation result notification</translation>
2850         </message>
2851         <message>
2852             <source>PREF_GROUP_ELEMENTS</source>
2853             <translation>Elements</translation>
2854         </message>
2855         <message>
2856             <source>PREF_GROUP_EXPORT</source>
2857             <translation>Mesh export</translation>
2858         </message>
2859         <message>
2860             <source>PREF_GROUP_FACES_ORIENTATION</source>
2861             <translation>Orientation of faces</translation>
2862         </message>
2863         <message>
2864             <source>PREF_GROUP_COMPUTE</source>
2865             <translation>Mesh computation</translation>
2866         </message>
2867         <message>
2868             <source>PREF_GROUP_NODES</source>
2869             <translation>Nodes</translation>
2870         </message>
2871         <message>
2872             <source>PREF_GROUP_PRECISION</source>
2873             <translation>Precision</translation>
2874         </message>
2875         <message>
2876             <source>PREF_GROUP_PRESELECTION</source>
2877             <translation>Preselection</translation>
2878         </message>
2879         <message>
2880             <source>PREF_GROUP_QUALITY</source>
2881             <translation>Quality controls</translation>
2882         </message>
2883         <message>
2884             <source>PREF_GROUP_SELECTION</source>
2885             <translation>Selection</translation>
2886         </message>
2887         <message>
2888             <source>PREF_GROUP_UPDATE</source>
2889             <translation>Update</translation>
2890         </message>
2891         <message>
2892             <source>PREF_HIGHLIGHT_COLOR</source>
2893             <translation>Highlight color</translation>
2894         </message>
2895         <message>
2896             <source>PREF_LABELS_COLOR</source>
2897             <translation>Labels color</translation>
2898         </message>
2899         <message>
2900             <source>PREF_NODES</source>
2901             <translation>Nodes</translation>
2902         </message>
2903         <message>
2904             <source>PREF_OBJECTS</source>
2905             <translation>Objects</translation>
2906         </message>
2907         <message>
2908             <source>PREF_OBJECT_COLOR</source>
2909             <translation>Object color</translation>
2910         </message>
2911         <message>
2912             <source>PREF_OUTLINE</source>
2913             <translation>Outline</translation>
2914         </message>
2915         <message>
2916             <source>PREF_PRECISION_USE</source>
2917             <translation>Use precision</translation>
2918         </message>
2919         <message>
2920             <source>PREF_PRECISION_VALUE</source>
2921             <translation>Number of digits after point</translation>
2922         </message>
2923         <message>
2924             <source>PREF_RENUMBER</source>
2925             <translation>Automatic renumbering</translation>
2926         </message>
2927         <message>
2928             <source>PREF_SHRINK_COEFF</source>
2929             <translation>Shrink coef.</translation>
2930         </message>
2931         <message>
2932             <source>PREF_SIZE</source>
2933             <translation>Size</translation>
2934         </message>
2935         <message>
2936             <source>PREF_TAB_GENERAL</source>
2937             <translation>General</translation>
2938         </message>
2939         <message>
2940             <source>PREF_TAB_MESH</source>
2941             <translation>Mesh</translation>
2942         </message>
2943         <message>
2944             <source>PREF_TAB_SELECTION</source>
2945             <translation>Selection</translation>
2946         </message>
2947         <message>
2948             <source>PREF_TITLE_COLOR</source>
2949             <translation>Title color</translation>
2950         </message>
2951         <message>
2952             <source>PREF_WIDTH</source>
2953             <translation>Width</translation>
2954         </message>
2955     </context>
2956     <context>
2957         <name>SMESHGUI_AddQuadraticElementDlg</name>
2958         <message>
2959             <source>SMESH_ADD_QUADRATIC_EDGE</source>
2960             <translation>Add Quadratic Edge</translation>
2961         </message>
2962         <message>
2963             <source>SMESH_ADD_QUADRATIC_HEXAHEDRON</source>
2964             <translation>Add Quadratic Hexahedron</translation>
2965         </message>
2966         <message>
2967             <source>SMESH_ADD_QUADRATIC_PENTAHEDRON</source>
2968             <translation>Add Quadratic Pentahedron</translation>
2969         </message>
2970         <message>
2971             <source>SMESH_ADD_QUADRATIC_PYRAMID</source>
2972             <translation>Add Quadratic Pyramid</translation>
2973         </message>
2974         <message>
2975             <source>SMESH_ADD_QUADRATIC_QUADRANGLE</source>
2976             <translation>Add Quadratic Quadrangle</translation>
2977         </message>
2978         <message>
2979             <source>SMESH_ADD_QUADRATIC_TETRAHEDRON</source>
2980             <translation>Add Quadratic Tetrahedron</translation>
2981         </message>
2982         <message>
2983             <source>SMESH_ADD_QUADRATIC_TRIANGLE</source>
2984             <translation>Add Quadratic Triangle</translation>
2985         </message>
2986         <message>
2987             <source>SMESH_CORNER_NODES</source>
2988             <translation>Corner Nodes:</translation>
2989         </message>
2990         <message>
2991             <source>SMESH_FIRST</source>
2992             <translation>First</translation>
2993         </message>
2994         <message>
2995             <source>SMESH_LAST</source>
2996             <translation>Last</translation>
2997         </message>
2998         <message>
2999             <source>SMESH_MIDDLE</source>
3000             <translation>Middle</translation>
3001         </message>
3002     </context>
3003     <context>
3004         <name>SMESHGUI_BuildCompoundDlg</name>
3005         <message>
3006             <source>COMPOUND</source>
3007             <translation>Compound</translation>
3008         </message>
3009         <message>
3010             <source>COMPOUND_MESH</source>
3011             <translation>Compound_Mesh</translation>
3012         </message>
3013         <message>
3014             <source>CREATE_COMMON_GROUPS</source>
3015             <translation>Create common groups for initial meshes</translation>
3016         </message>
3017         <message>
3018             <source>MERGE_NODES_AND_ELEMENTS</source>
3019             <translation>Merge coincident nodes and elements</translation>
3020         </message>
3021         <message>
3022             <source>MESHES</source>
3023             <translation>Meshes</translation>
3024         </message>
3025         <message>
3026             <source>PROCESSING_IDENTICAL_GROUPS</source>
3027             <translation>Processing identical groups</translation>
3028         </message>
3029         <message>
3030             <source>RENAME</source>
3031             <translation>Rename</translation>
3032         </message>
3033         <message>
3034             <source>RESULT_NAME</source>
3035             <translation>Result name</translation>
3036         </message>
3037         <message>
3038             <source>UNITE</source>
3039             <translation>Unite</translation>
3040         </message>
3041     </context>
3042     <context>
3043         <name>SMESHGUI_ChangeOrientationDlg</name>
3044         <message>
3045             <source>CAPTION</source>
3046             <translation>Modification of orientation</translation>
3047         </message>
3048     </context>
3049     <context>
3050         <name>SMESHGUI_ComputeDlg</name>
3051         <message>
3052             <source>CAPTION</source>
3053             <translation>Compute mesh failed</translation>
3054         </message>
3055         <message>
3056             <source>CONSTRUCTOR</source>
3057             <translation>Compute mesh</translation>
3058         </message>
3059         <message>
3060             <source>ERRORS</source>
3061             <translation>Errors</translation>
3062         </message>
3063         <message>
3064             <source>MEMORY_LACK</source>
3065             <translation>Memory allocation problem</translation>
3066         </message>
3067         <message>
3068             <source>PUBLISH_SHAPE</source>
3069             <translation>Publish SubShape</translation>
3070         </message>
3071         <message>
3072             <source>SHOW_SHAPE</source>
3073             <translation>Show SubShape</translation>
3074         </message>
3075         <message>
3076             <source>SHOW_BAD_MESH</source>
3077             <translation>Show bad Mesh</translation>
3078         </message>
3079     </context>
3080     <context>
3081         <name>SMESHGUI_ConvToQuadDlg</name>
3082         <message>
3083             <source>CAPTION</source>
3084             <translation>Convert to/from quadratic</translation>
3085         </message>
3086         <message>
3087             <source>MEDIUMNDS</source>
3088             <translation>Medium nodes on geometry</translation>
3089         </message>
3090         <message>
3091             <source>MESH</source>
3092             <translation>Mesh</translation>
3093         </message>
3094         <message>
3095             <source>RADIOBTN_1</source>
3096             <translation>Convert to quadratic</translation>
3097         </message>
3098         <message>
3099             <source>RADIOBTN_2</source>
3100             <translation>Convert from quadratic</translation>
3101         </message>
3102     </context>
3103     <context>
3104         <name>SMESHGUI_ConvToQuadOp</name>
3105         <message>
3106             <source>MESH_IS_NOT_SELECTED</source>
3107             <translation>Mesh is not selected
3108 Please specify it and try again</translation>
3109         </message>
3110         <message>
3111             <source>REF_IS_NULL</source>
3112             <translation>No valid mesh object selected</translation>
3113         </message>
3114     </context>
3115     <context>
3116         <name>SMESHGUI_CreatePatternDlg</name>
3117         <message>
3118             <source>CAPTION</source>
3119             <translation>Pattern Creation</translation>
3120         </message>
3121         <message>
3122             <source>DEFAULT_2D</source>
3123             <translation>Pattern_2d</translation>
3124         </message>
3125         <message>
3126             <source>DEFAULT_3D</source>
3127             <translation>Pattern_3d</translation>
3128         </message>
3129         <message>
3130             <source>ERROR_OF_CREATION</source>
3131             <translation>Internal error occurs during pattern creation
3132 Please verify validity of entered information</translation>
3133         </message>
3134         <message>
3135             <source>ERROR_OF_SAVING</source>
3136             <translation>Internal error occurs during pattern saving. Please verify
3137 \free disk space and your write permission to this file</translation>
3138         </message>
3139         <message>
3140             <source>ERR_LOADF_CANT_PROJECT</source>
3141             <translation>Impossible to perform projection of nodes to the face</translation>
3142         </message>
3143         <message>
3144             <source>ERR_LOADF_CLOSED_FACE</source>
3145             <translation>It is impossible to create pattern from face having seam edge</translation>
3146         </message>
3147         <message>
3148             <source>ERR_LOADF_NARROW_FACE</source>
3149             <translation>It is impossible to create pattern from narrow face</translation>
3150         </message>
3151         <message>
3152             <source>ERR_LOADV_BAD_SHAPE</source>
3153             <translation>Pattern can be created from closed shell or solid with 6 faces only</translation>
3154         </message>
3155         <message>
3156             <source>ERR_LOADV_COMPUTE_PARAMS</source>
3157             <translation>It is impossible to compute point parameters</translation>
3158         </message>
3159         <message>
3160             <source>ERR_LOAD_EMPTY_SUBMESH</source>
3161             <translation>There are no elements to create pattern</translation>
3162         </message>
3163         <message>
3164             <source>MESH_OR_SUBMESH</source>
3165             <translation>Mesh or SubMesh</translation>
3166         </message>
3167         <message>
3168             <source>PATTERN</source>
3169             <translation>Pattern</translation>
3170         </message>
3171         <message>
3172             <source>PATTERN_FILT</source>
3173             <translation>Pattern files(*.smp)</translation>
3174         </message>
3175         <message>
3176             <source>PATTERN_NAME</source>
3177             <translation>Pattern name</translation>
3178         </message>
3179         <message>
3180             <source>PATTERN_TYPE</source>
3181             <translation>Pattern type</translation>
3182         </message>
3183         <message>
3184             <source>PROJECT</source>
3185             <translation>Project nodes on the face</translation>
3186         </message>
3187         <message>
3188             <source>SAVE</source>
3189             <translation>Save...</translation>
3190         </message>
3191         <message>
3192             <source>SAVE_PATTERN</source>
3193             <translation>Save Pattern</translation>
3194         </message>
3195     </context>
3196     <context>
3197         <name>SMESHGUI_CreatePolyhedralVolumeDlg</name>
3198         <message>
3199             <source>FACES_BY_NODES</source>
3200             <translation>Faces by nodes</translation>
3201         </message>
3202         <message>
3203             <source>SMESH_POLYEDRE_CREATE_ERROR</source>
3204             <translation>Polyhedron creation error.</translation>
3205         </message>
3206         <message>
3207             <source>SMESH_POLYEDRE_PREVIEW</source>
3208             <translation>Polyhedron preview</translation>
3209         </message>
3210     </context>
3211     <context>
3212         <name>SMESHGUI_CuttingOfQuadsDlg</name>
3213         <message>
3214             <source>CAPTION</source>
3215             <translation>Cutting of quadrangles</translation>
3216         </message>
3217     </context>
3218     <context>
3219         <name>SMESHGUI_DeleteGroupDlg</name>
3220         <message>
3221             <source>CAPTION</source>
3222             <translation>Delete groups with contents</translation>
3223         </message>
3224         <message>
3225             <source>NO_SELECTED_GROUPS</source>
3226             <translation>There are no selected groups
3227 Please select a groups and try again</translation>
3228         </message>
3229         <message>
3230             <source>SELECTED_GROUPS</source>
3231             <translation>Selected groups</translation>
3232         </message>
3233     </context>
3234     <context>
3235         <name>SMESHGUI_EditMeshDlg</name>
3236         <message>
3237             <source>COINCIDENT_ELEMENTS</source>
3238             <translation>Coincident elements</translation>
3239         </message>
3240         <message>
3241             <source>COINCIDENT_NODES</source>
3242             <translation>Coincident nodes</translation>
3243         </message>
3244         <message>
3245             <source>DETECT</source>
3246             <translation>Detect</translation>
3247         </message>
3248         <message>
3249             <source>EDIT_SELECTED_GROUP</source>
3250             <translation>Edit selected group</translation>
3251         </message>
3252         <message>
3253             <source>SELECT_ALL</source>
3254             <translation>Select all</translation>
3255         </message>
3256     </context>
3257     <context>
3258         <name>SMESHGUI_ExtrusionAlongPathDlg</name>
3259         <message>
3260             <source>BAD_SHAPE_TYPE</source>
3261             <translation>The shape selected for the path is not edge</translation>
3262         </message>
3263         <message>
3264             <source>CANT_GET_TANGENT</source>
3265             <translation>Can't get tangent for one of the path nodes</translation>
3266         </message>
3267         <message>
3268             <source>EXTRUSION_1D</source>
3269             <translation>Extrusion of 1D elements</translation>
3270         </message>
3271         <message>
3272             <source>EXTRUSION_2D</source>
3273             <translation>Extrusion of 2D elements</translation>
3274         </message>
3275         <message>
3276             <source>EXTRUSION_ALONG_PATH</source>
3277             <translation>Extrusion along a path</translation>
3278         </message>
3279         <message>
3280             <source>EXTR_BAD_STARTING_NODE</source>
3281             <translation>Wrong path starting node</translation>
3282         </message>
3283         <message>
3284             <source>LINEAR_ANGLES</source>
3285             <translation>Linear variation of the angles</translation>
3286         </message>
3287         <message>
3288             <source>NO_ELEMENTS_SELECTED</source>
3289             <translation>No mesh elements are selected for extrusion</translation>
3290         </message>
3291         <message>
3292             <source>SELECTED_PATH_IS_NOT_EDGE</source>
3293             <translation>Path mesh should be of edge type</translation>
3294         </message>
3295         <message>
3296             <source>SMESH_ANGLES</source>
3297             <translation>Rotation Angles</translation>
3298         </message>
3299         <message>
3300             <source>SMESH_BASE_POINT</source>
3301             <translation>Base Point</translation>
3302         </message>
3303         <message>
3304             <source>SMESH_PATH</source>
3305             <translation>Path</translation>
3306         </message>
3307         <message>
3308             <source>SMESH_PATH_MESH</source>
3309             <translation>Mesh</translation>
3310         </message>
3311         <message>
3312             <source>SMESH_PATH_SHAPE</source>
3313             <translation>Shape (edge)</translation>
3314         </message>
3315         <message>
3316             <source>SMESH_PATH_START</source>
3317             <translation>Start node</translation>
3318         </message>
3319         <message>
3320             <source>SMESH_USE_ANGLES</source>
3321             <translation>Use Angles</translation>
3322         </message>
3323         <message>
3324             <source>SMESH_USE_BASE_POINT</source>
3325             <translation>Use Base Point</translation>
3326         </message>
3327         <message>
3328             <source>WRONG_ANGLES_NUMBER</source>
3329             <translation>The number of angles should correspond to the number of path nodes</translation>
3330         </message>
3331     </context>
3332     <context>
3333         <name>SMESHGUI_ExtrusionDlg</name>
3334         <message>
3335             <source>EXTRUSION_1D</source>
3336             <translation>Extrusion of 1D elements</translation>
3337         </message>
3338         <message>
3339             <source>EXTRUSION_2D</source>
3340             <translation>Extrusion of 2D elements</translation>
3341         </message>
3342         <message>
3343             <source>EXTRUSION_ALONG_LINE</source>
3344             <translation>Extrusion along a line</translation>
3345         </message>
3346     </context>
3347     <context>
3348         <name>SMESHGUI_FilterDlg</name>
3349         <message>
3350             <source>BAD_SHAPE_NAME</source>
3351             <translation>There is no "%1" geometrical object in the current study
3352 Please select valid object and try again</translation>
3353         </message>
3354         <message>
3355             <source>CURRENT_GROUP</source>
3356             <translation>Current Group</translation>
3357         </message>
3358         <message>
3359             <source>EDGES_TLT</source>
3360             <translation>Filter for Edges</translation>
3361         </message>
3362         <message>
3363             <source>FACES_TLT</source>
3364             <translation>Filter for Faces</translation>
3365         </message>
3366         <message>
3367             <source>MESH</source>
3368             <translation>Mesh</translation>
3369         </message>
3370         <message>
3371             <source>NODES_TLT</source>
3372             <translation>Filter for Nodes</translation>
3373         </message>
3374         <message>
3375             <source>SELECTION</source>
3376             <translation>Initial Selection</translation>
3377         </message>
3378         <message>
3379             <source>SET_IN_VIEWER</source>
3380             <translation>Insert filter in viewer</translation>
3381         </message>
3382         <message>
3383             <source>SHAPE_IS_NOT_A_CYLINDER</source>
3384             <translation>"%1" is not a cylinderical face
3385 Please select a cylindrical face and try again</translation>
3386         </message>
3387         <message>
3388             <source>SHAPE_IS_NOT_A_FACE</source>
3389             <translation>"%1" is not a face
3390 Please select a face and try again</translation>
3391         </message>
3392         <message>
3393             <source>SHAPE_IS_NOT_A_PLANE</source>
3394             <translation>"%1" is not a plane
3395 Please select a plane and try again</translation>
3396         </message>
3397         <message>
3398             <source>SOURCE</source>
3399             <translation>Source</translation>
3400         </message>
3401         <message>
3402             <source>TLT</source>
3403             <translation>Selection filter</translation>
3404         </message>
3405         <message>
3406             <source>VOLUMES_TLT</source>
3407             <translation>Filter for Volumes</translation>
3408         </message>
3409     </context>
3410     <context>
3411         <name>SMESHGUI_FilterLibraryDlg</name>
3412         <message>
3413             <source>ADD</source>
3414             <translation>Add</translation>
3415         </message>
3416         <message>
3417             <source>ADD_TO_TLT</source>
3418             <translation>Add selection filter to library</translation>
3419         </message>
3420         <message>
3421             <source>ALL_FILES_FILTER</source>
3422             <translation>All Files (*.*)</translation>
3423         </message>
3424         <message>
3425             <source>ASSIGN_NEW_NAME</source>
3426             <translation>Library already contains filter with name "%1"
3427 New name "%2" is assigned to added filter</translation>
3428         </message>
3429         <message>
3430             <source>COPY_FROM_TLT</source>
3431             <translation>Copy selection filter from library</translation>
3432         </message>
3433         <message>
3434             <source>DELETE</source>
3435             <translation>Delete</translation>
3436         </message>
3437         <message>
3438             <source>EDGE</source>
3439             <translation>Edge</translation>
3440         </message>
3441         <message>
3442             <source>EDIT_LIB_TLT</source>
3443             <translation>Selection filter library</translation>
3444         </message>
3445         <message>
3446             <source>ELEMENT</source>
3447             <translation>Element</translation>
3448         </message>
3449         <message>
3450             <source>EMPTY_FILTER_NAME</source>
3451             <translation>Name of the filter is empty
3452 Please enter a non-empty name</translation>
3453         </message>
3454         <message>
3455             <source>ERROR_FILTER_NAME</source>
3456             <translation>Name of the filter is not unique
3457 Please enter other name</translation>
3458         </message>
3459         <message>
3460             <source>ERROR_LOAD</source>
3461             <translation>It is impossible to load library
3462 Please check library file name and attributes</translation>
3463         </message>
3464         <message>
3465             <source>ERROR_OF_ADDING</source>
3466             <translation>Internal error occurs during adiing new filter in library.
3467 Please verify validity of entered information</translation>
3468         </message>
3469         <message>
3470             <source>ERROR_OF_COPYING</source>
3471             <translation>Internal error occurs during copying filter from library.
3472 Please verify validity of entered information</translation>
3473         </message>
3474         <message>
3475             <source>ERROR_OF_DELETING</source>
3476             <translation>Internal error occurs during deleting filter from library.
3477 Please verify validity of entered information</translation>
3478         </message>
3479         <message>
3480             <source>ERROR_OF_EDITING</source>
3481             <translation>Internal error occurs during editing filter library.
3482 Please verify validity of entered information</translation>
3483         </message>
3484         <message>
3485             <source>ERROR_OF_SAVING</source>
3486             <translation>Internal error occurs during saving filter library
3487 Please check input data and try again</translation>
3488         </message>
3489         <message>
3490             <source>FACE</source>
3491             <translation>Face</translation>
3492         </message>
3493         <message>
3494             <source>FILTER</source>
3495             <translation>Filter</translation>
3496         </message>
3497         <message>
3498             <source>FILTER_NAME</source>
3499             <translation>Filter name</translation>
3500         </message>
3501         <message>
3502             <source>FILTER_NAMES</source>
3503             <translation>Names of filters</translation>
3504         </message>
3505         <message>
3506             <source>LIBRARY_FILE</source>
3507             <translation>Library file name</translation>
3508         </message>
3509         <message>
3510             <source>LIBRARY_IS_NOT_LOADED</source>
3511             <translation>Library is not loaded. Please load library and try again</translation>
3512         </message>
3513         <message>
3514             <source>LIB_NAME</source>
3515             <translation>FilterLib.xml</translation>
3516         </message>
3517         <message>
3518             <source>NODE</source>
3519             <translation>Node</translation>
3520         </message>
3521         <message>
3522             <source>NO_PERMISSION</source>
3523             <translation>You do not have write permission to this file</translation>
3524         </message>
3525         <message>
3526             <source>OPEN_LIBRARY</source>
3527             <translation>Open library</translation>
3528         </message>
3529         <message>
3530             <source>SELECTION</source>
3531             <translation>Selection</translation>
3532         </message>
3533         <message>
3534             <source>VOLUME</source>
3535             <translation>Volume</translation>
3536         </message>
3537         <message>
3538             <source>XML_FILT</source>
3539             <translation>XML files(*.xml)</translation>
3540         </message>
3541     </context>
3542     <context>
3543         <name>SMESHGUI_FilterTable</name>
3544         <message>
3545             <source>ADD</source>
3546             <translation>Add</translation>
3547         </message>
3548         <message>
3549             <source>ADDITIONAL_PARAMETERS</source>
3550             <translation>Additional parameters</translation>
3551         </message>
3552         <message>
3553             <source>ADD_TO</source>
3554             <translation>Add to...</translation>
3555         </message>
3556         <message>
3557             <source>AND</source>
3558             <translation>And</translation>
3559         </message>
3560         <message>
3561             <source>AREA</source>
3562             <translation>Area</translation>
3563         </message>
3564         <message>
3565             <source>ASPECT_RATIO</source>
3566             <translation>Aspect ratio</translation>
3567         </message>
3568         <message>
3569             <source>ASPECT_RATIO_3D</source>
3570             <translation>Aspect ratio 3D</translation>
3571         </message>
3572         <message>
3573             <source>BAD_ORIENTED_VOLUME</source>
3574             <translation>Bad oriented volume</translation>
3575         </message>
3576         <message>
3577             <source>BELONG_TO_CYLINDER</source>
3578             <translation>Belong to Cylinder</translation>
3579         </message>
3580         <message>
3581             <source>BELONG_TO_GENSURFACE</source>
3582             <translation>Belong to Surface</translation>
3583         </message>
3584         <message>
3585             <source>BELONG_TO_GEOM</source>
3586             <translation>Belong to Geom</translation>
3587         </message>
3588         <message>
3589             <source>BELONG_TO_PLANE</source>
3590             <translation>Belong to Plane</translation>
3591         </message>
3592         <message>
3593             <source>BINARY</source>
3594             <translation>Binary</translation>
3595         </message>
3596         <message>
3597             <source>CLEAR</source>
3598             <translation>Clear</translation>
3599         </message>
3600         <message>
3601             <source>COMPARE</source>
3602             <translation>Compare</translation>
3603         </message>
3604         <message>
3605             <source>COPY_FROM</source>
3606             <translation>Copy from...</translation>
3607         </message>
3608         <message>
3609             <source>CRITERION</source>
3610             <translation>Criterion</translation>
3611         </message>
3612         <message>
3613             <source>EDGES</source>
3614             <translation>Edges</translation>
3615         </message>
3616         <message>
3617             <source>ENTITY_TYPE</source>
3618             <translation>Entity type</translation>
3619         </message>
3620         <message>
3621             <source>EQUAL_TO</source>
3622             <translation>Equal to</translation>
3623         </message>
3624         <message>
3625             <source>ERROR</source>
3626             <translation>Threshold value is not correctly specified
3627 Please enter correct value and try again</translation>
3628         </message>
3629         <message>
3630             <source>FACES</source>
3631             <translation>Faces</translation>
3632         </message>
3633         <message>
3634             <source>FILTER</source>
3635             <translation>Filter</translation>
3636         </message>
3637         <message>
3638             <source>FREE_BORDERS</source>
3639             <translation>Free borders</translation>
3640         </message>
3641         <message>
3642             <source>FREE_EDGES</source>
3643             <translation>Free edges</translation>
3644         </message>
3645         <message>
3646             <source>ID</source>
3647             <translation>ID</translation>
3648         </message>
3649         <message>
3650             <source>INSERT</source>
3651             <translation>Insert</translation>
3652         </message>
3653         <message>
3654             <source>LENGTH</source>
3655             <translation>Length</translation>
3656         </message>
3657         <message>
3658             <source>LESS_THAN</source>
3659             <translation>Less than</translation>
3660         </message>
3661         <message>
3662             <source>LYING_ON_GEOM</source>
3663             <translation>Lying on Geom</translation>
3664         </message>
3665         <message>
3666             <source>MINIMUM_ANGLE</source>
3667             <translation>Minimum angle</translation>
3668         </message>
3669         <message>
3670             <source>MORE_THAN</source>
3671             <translation>More than</translation>
3672         </message>
3673         <message>
3674             <source>MULTIEDGES_ERROR</source>
3675             <translation>Threshold value of borders at multi-connections can not be equal 1
3676 Please enter correct value and try again</translation>
3677         </message>
3678         <message>
3679             <source>MULTI_BORDERS</source>
3680             <translation>Borders at multi-connections</translation>
3681         </message>
3682         <message>
3683             <source>NODES</source>
3684             <translation>Nodes</translation>
3685         </message>
3686         <message>
3687             <source>NOT</source>
3688             <translation>Not</translation>
3689         </message>
3690         <message>
3691             <source>OR</source>
3692             <translation>Or</translation>
3693         </message>
3694         <message>
3695             <source>RANGE_OF_IDS</source>
3696             <translation>Range of IDs</translation>
3697         </message>
3698         <message>
3699             <source>REMOVE</source>
3700             <translation>Remove</translation>
3701         </message>
3702         <message>
3703             <source>SKEW</source>
3704             <translation>Skew</translation>
3705         </message>
3706         <message>
3707             <source>TAPER</source>
3708             <translation>Taper</translation>
3709         </message>
3710         <message>
3711             <source>THRESHOLD_VALUE</source>
3712             <translation>Threshold value</translation>
3713         </message>
3714         <message>
3715             <source>UNARY</source>
3716             <translation>Unary</translation>
3717         </message>
3718         <message>
3719             <source>VOLUMES</source>
3720             <translation>Volumes</translation>
3721         </message>
3722         <message>
3723             <source>VOLUME_3D</source>
3724             <translation>Volume</translation>
3725         </message>
3726         <message>
3727             <source>WARPING</source>
3728             <translation>Warping</translation>
3729         </message>
3730     </context>
3731     <context>
3732         <name>SMESHGUI_GroupOpDlg</name>
3733         <message>
3734             <source>ARGUMENTS</source>
3735             <translation>Arguments</translation>
3736         </message>
3737         <message>
3738             <source>CUT_OF_TWO_GROUPS</source>
3739             <translation>Cut of two groups</translation>
3740         </message>
3741         <message>
3742             <source>DIFF_MESHES</source>
3743             <translation>Arguments of operation are not correctly specified
3744 Groups correspond to a different meshes
3745 Please specify valid arguments and try again</translation>
3746         </message>
3747         <message>
3748             <source>DIFF_TYPES</source>
3749             <translation>Arguments of operation are not correctly specified
3750 Groups contain elements of different types
3751 Please specify valid arguments and try again</translation>
3752         </message>
3753         <message>
3754             <source>EMPTY_NAME</source>
3755             <translation>Name of group to be created is not valid
3756 Please specify non-empty name and try again</translation>
3757         </message>
3758         <message>
3759             <source>INCORRECT_ARGUMENTS</source>
3760             <translation>Arguments of operation are not specified
3761 Please specify them and try again</translation>
3762         </message>
3763         <message>
3764             <source>INTERSECTION_OF_TWO_GROUPS</source>
3765             <translation>Intersection of two groups</translation>
3766         </message>
3767         <message>
3768             <source>MAIN_OBJECT</source>
3769             <translation>Main object</translation>
3770         </message>
3771         <message>
3772             <source>NAME</source>
3773             <translation>Name</translation>
3774         </message>
3775         <message>
3776             <source>OBJECT_1</source>
3777             <translation>Object 1</translation>
3778         </message>
3779         <message>
3780             <source>OBJECT_2</source>
3781             <translation>Object 2</translation>
3782         </message>
3783         <message>
3784             <source>RESULT_NAME</source>
3785             <translation>Result name</translation>
3786         </message>
3787         <message>
3788             <source>TOOL_OBJECT</source>
3789             <translation>Tool object</translation>
3790         </message>
3791         <message>
3792             <source>UNION_OF_TWO_GROUPS</source>
3793             <translation>Union of two groups</translation>
3794         </message>
3795     </context>
3796     <context>
3797         <name>SMESHGUI_MakeNodeAtPointDlg</name>
3798         <message>
3799             <source>AUTO_SEARCH</source>
3800             <translation>Automatic search</translation>
3801         </message>
3802         <message>
3803             <source>CAPTION</source>
3804             <translation>Mesh to pass through a point</translation>
3805         </message>
3806         <message>
3807             <source>CREATE_NEW_METHOD</source>
3808             <translation>Create a node</translation>
3809         </message>
3810         <message>
3811             <source>MESH_PASS_THROUGH_POINT</source>
3812             <translation>Make a node at point</translation>
3813         </message>
3814         <message>
3815             <source>METHOD</source>
3816             <translation>Method</translation>
3817         </message>
3818         <message>
3819             <source>MOVE_EXISTING_METHOD</source>
3820             <translation>Move a node</translation>
3821         </message>
3822         <message>
3823             <source>NODE_2MOVE</source>
3824             <translation>Node to move</translation>
3825         </message>
3826         <message>
3827             <source>NODE_2MOVE_ID</source>
3828             <translation>ID</translation>
3829         </message>
3830     </context>
3831     <context>
3832         <name>SMESHGUI_MakeNodeAtPointOp</name>
3833         <message>
3834             <source>INVALID_ID</source>
3835             <translation>Node ID is invalid</translation>
3836         </message>
3837         <message>
3838             <source>INVALID_MESH</source>
3839             <translation>Mesh to modify not selected</translation>
3840         </message>
3841     </context>
3842     <context>
3843         <name>SMESHGUI_MeshDlg</name>
3844         <message>
3845             <source>CREATE_MESH</source>
3846             <translation>Create mesh</translation>
3847         </message>
3848         <message>
3849             <source>CREATE_SUBMESH</source>
3850             <translation>Create sub-mesh</translation>
3851         </message>
3852         <message>
3853             <source>DIM_0D</source>
3854             <translation>0D</translation>
3855         </message>
3856         <message>
3857             <source>DIM_1D</source>
3858             <translation>1D</translation>
3859         </message>
3860         <message>
3861             <source>DIM_2D</source>
3862             <translation>2D</translation>
3863         </message>
3864         <message>
3865             <source>DIM_3D</source>
3866             <translation>3D</translation>
3867         </message>
3868         <message>
3869             <source>EDIT_MESH_SUBMESH</source>
3870             <translation>Edit mesh/sub-mesh</translation>
3871         </message>
3872         <message>
3873             <source>GEOMETRY</source>
3874             <translation>Geometry</translation>
3875         </message>
3876         <message>
3877             <source>HYPOTHESES_SETS</source>
3878             <translation>Assign a set of hypotheses</translation>
3879         </message>
3880         <message>
3881             <source>MESH</source>
3882             <translation>Mesh</translation>
3883         </message>
3884         <message>
3885             <source>NAME</source>
3886             <translation>Name</translation>
3887         </message>
3888     </context>
3889     <context>
3890         <name>SMESHGUI_MeshOp</name>
3891         <message>
3892             <source>ALGORITHM_WITHOUT_HYPOTHESIS</source>
3893             <translation>Algorithm is defined for %1 dimension but hypothesis is not defined</translation>
3894         </message>
3895         <message>
3896             <source>EDIT_SUBMESH_QUESTION</source>
3897             <translation>A submesh on the selected geometry already exists.
3898  Do you want to edit this submesh?</translation>
3899         </message>
3900         <message>
3901             <source>SUBMESH_NOT_ALLOWED</source>
3902             <translation>No sense in creating a submesh ignored by global algorithm "%1"</translation>
3903         </message>
3904         <message>
3905             <source>GEOMETRY_OBJECT_IS_NOT_DEFINED</source>
3906             <translation>Geometry object is not defined
3907 Please specify it and try again</translation>
3908         </message>
3909         <message>
3910             <source>GEOMETRY_OBJECT_IS_NULL</source>
3911             <translation>Geometry object is null</translation>
3912         </message>
3913         <message>
3914             <source>HYPOTHESES_AND_ALGORITHMS_ARE_NOT_DEFINED</source>
3915             <translation>Hypotheses and algorithms are not defined</translation>
3916         </message>
3917         <message>
3918             <source>HYPOTHESIS_WITHOUT_ALGORITHM</source>
3919             <translation>Hypothesis is defined for %1 dimension but algorithm is not defined</translation>
3920         </message>
3921         <message>
3922             <source>IMPORTED_MESH</source>
3923             <translation>Mesh is not built on geometry</translation>
3924         </message>
3925         <message>
3926             <source>INVALID_SUBSHAPE</source>
3927             <translation>Geometry object is not a subshape of the shape to mesh</translation>
3928         </message>
3929         <message>
3930             <source>MESH_IS_NOT_DEFINED</source>
3931             <translation>Mesh is not defined
3932 Please specify it and try again</translation>
3933         </message>
3934         <message>
3935             <source>MESH_IS_NULL</source>
3936             <translation>Mesh is null</translation>
3937         </message>
3938         <message>
3939             <source>NAME_OF_MESH_IS_EMPTY</source>
3940             <translation>Name of mesh is empty
3941 Please enter valid name and try again</translation>
3942         </message>
3943         <message>
3944             <source>NAME_OF_SUBMESH_IS_EMPTY</source>
3945             <translation>Name of submesh is empty
3946 Please enter valid name and try again</translation>
3947         </message>
3948         <message>
3949             <source>THERE_IS_NO_OBJECT_FOR_EDITING</source>
3950             <translation>There is no object for editing. Please
3951 select mesh or sub-mesh and try again</translation>
3952         </message>
3953     </context>
3954     <context>
3955         <name>SMESHGUI_MeshPatternDlg</name>
3956         <message>
3957             <source>3D_BLOCK</source>
3958             <translation>3D block</translation>
3959         </message>
3960         <message>
3961             <source>CAPTION</source>
3962             <translation>Pattern Mapping</translation>
3963         </message>
3964         <message>
3965             <source>CREATE_POLYEDRS_NEAR_BOUNDARY</source>
3966             <translation>Create polyhedrons near boundary</translation>
3967         </message>
3968         <message>
3969             <source>CREATE_POLYGONS_NEAR_BOUNDARY</source>
3970             <translation>Create polygons near boundary</translation>
3971         </message>
3972         <message>
3973             <source>ERROR_OF_LOADING</source>
3974             <translation>Loading of pattern from file failed. Probably file
3975 is corrupted or contains pattern of the other type</translation>
3976         </message>
3977         <message>
3978             <source>ERROR_OF_OPENING</source>
3979             <translation>It is impossible to open file. Please verify whether
3980 file exists and your permission to this file</translation>
3981         </message>
3982         <message>
3983             <source>ERROR_OF_READING</source>
3984             <translation>It is impossible to load pattern
3985 Please verify file's contents</translation>
3986         </message>
3987         <message>
3988             <source>ERR_READ_3D_COORD</source>
3989             <translation>It is impossible to load pattern
3990 Coordinates of 3D points out of [0,1] range</translation>
3991         </message>
3992         <message>
3993             <source>ERR_READ_BAD_INDEX</source>
3994             <translation>It is impossible to load pattern
3995 Invalid index of point detected</translation>
3996         </message>
3997         <message>
3998             <source>ERR_READ_BAD_KEY_POINT</source>
3999             <translation>It is impossible to load pattern
4000 Key-point not on a boundary</translation>
4001         </message>
4002         <message>
4003             <source>ERR_READ_ELEM_POINTS</source>
4004             <translation>It is impossible to load pattern
4005 invalid number of points in element</translation>
4006         </message>
4007         <message>
4008             <source>ERR_READ_NB_POINTS</source>
4009             <translation>It is impossible to load pattern
4010 It is impossible to read number of points from file</translation>
4011         </message>
4012         <message>
4013             <source>ERR_READ_NO_ELEMS</source>
4014             <translation>It is impossible to load pattern
4015 There are no elements in it</translation>
4016         </message>
4017         <message>
4018             <source>ERR_READ_NO_KEYPOINT</source>
4019             <translation>It is impossible to load pattern
4020 There are no key-points in 2D one</translation>
4021         </message>
4022         <message>
4023             <source>ERR_READ_POINT_COORDS</source>
4024             <translation>It is impossible to load pattern
4025 It is impossible to read point coordinates from file</translation>
4026         </message>
4027         <message>
4028             <source>ERR_READ_TOO_FEW_POINTS</source>
4029             <translation>It is impossible to load pattern. There are
4030  too few points in the file for pattern loading</translation>
4031         </message>
4032         <message>
4033             <source>FACE</source>
4034             <translation>Face</translation>
4035         </message>
4036         <message>
4037             <source>LOAD_PATTERN</source>
4038             <translation>Load pattern</translation>
4039         </message>
4040         <message>
4041             <source>MESH_FACES</source>
4042             <translation>Mesh faces</translation>
4043         </message>
4044         <message>
4045             <source>MESH_VOLUMES</source>
4046             <translation>Mesh volumes</translation>
4047         </message>
4048         <message>
4049             <source>NEW</source>
4050             <translation>New...</translation>
4051         </message>
4052         <message>
4053             <source>NODE_1</source>
4054             <translation>Node 1</translation>
4055         </message>
4056         <message>
4057             <source>NODE_2</source>
4058             <translation>Node 2</translation>
4059         </message>
4060         <message>
4061             <source>PATTERN</source>
4062             <translation>Pattern</translation>
4063         </message>
4064         <message>
4065             <source>PATTERN_FILT</source>
4066             <translation>Pattern files(*.smp)</translation>
4067         </message>
4068         <message>
4069             <source>PATTERN_TYPE</source>
4070             <translation>Pattern type</translation>
4071         </message>
4072         <message>
4073             <source>PREVIEW</source>
4074             <translation>Preview</translation>
4075         </message>
4076         <message>
4077             <source>REFINE</source>
4078             <translation>Refine selected mesh elements</translation>
4079         </message>
4080         <message>
4081             <source>REVERSE</source>
4082             <translation>Reverse order of key-points</translation>
4083         </message>
4084         <message>
4085             <source>VERTEX</source>
4086             <translation>Vertex   </translation>
4087         </message>
4088         <message>
4089             <source>VERTEX1</source>
4090             <translation>Vertex 1</translation>
4091         </message>
4092         <message>
4093             <source>VERTEX2</source>
4094             <translation>Vertex 2</translation>
4095         </message>
4096     </context>
4097     <context>
4098         <name>SMESHGUI_MeshTab</name>
4099         <message>
4100             <source>ADD_HYPOTHESIS</source>
4101             <translation>Add. Hypothesis</translation>
4102         </message>
4103         <message>
4104             <source>ALGORITHM</source>
4105             <translation>Algorithm</translation>
4106         </message>
4107         <message>
4108             <source>HYPOTHESIS</source>
4109             <translation>Hypothesis</translation>
4110         </message>
4111         <message>
4112             <source>NONE</source>
4113             <translation>&lt;None></translation>
4114         </message>
4115     </context>
4116     <context>
4117         <name>SMESHGUI_MoveNodesDlg</name>
4118         <message>
4119             <source>CAPTION</source>
4120             <translation>Move node</translation>
4121         </message>
4122         <message>
4123             <source>NODE_ID_IS_NOT_DEFINED</source>
4124             <translation>Node ID is not defined</translation>
4125         </message>
4126     </context>
4127     <context>
4128         <name>SMESHGUI_MultiEditDlg</name>
4129         <message>
4130             <source>ADD</source>
4131             <translation>Add</translation>
4132         </message>
4133         <message>
4134             <source>FILTER</source>
4135             <translation>Filter</translation>
4136         </message>
4137         <message>
4138             <source>REMOVE</source>
4139             <translation>Remove</translation>
4140         </message>
4141         <message>
4142             <source>SELECT_FROM</source>
4143             <translation>Select from</translation>
4144         </message>
4145         <message>
4146             <source>SORT_LIST</source>
4147             <translation>Sort list</translation>
4148         </message>
4149         <message>
4150             <source>SPLIT_JOIN_CRITERION</source>
4151             <translation>Criterion</translation>
4152         </message>
4153         <message>
4154             <source>TO_ALL</source>
4155             <translation>Apply to all</translation>
4156         </message>
4157         <message>
4158             <source>USE_DIAGONAL_1_3</source>
4159             <translation>Use diagonal 1-3</translation>
4160         </message>
4161         <message>
4162             <source>USE_DIAGONAL_2_4</source>
4163             <translation>Use diagonal 2-4</translation>
4164         </message>
4165         <message>
4166             <source>USE_NUMERIC_FUNC</source>
4167             <translation>Use numeric functor</translation>
4168         </message>
4169     </context>
4170     <context>
4171         <name>SMESHGUI_PrecisionDlg</name>
4172         <message>
4173             <source>CAPTION</source>
4174             <translation>Precision for mesh quality controls</translation>
4175         </message>
4176         <message>
4177             <source>NOT_USE</source>
4178             <translation>Do not use</translation>
4179         </message>
4180         <message>
4181             <source>PRECISION</source>
4182             <translation>Number of digits after point</translation>
4183         </message>
4184     </context>
4185     <context>
4186         <name>SMESHGUI_RevolutionDlg</name>
4187         <message>
4188             <source>ANGLE_BY_STEP</source>
4189             <translation>Angle by Step</translation>
4190         </message>
4191         <message>
4192             <source>PREVIEW</source>
4193             <translation>Preview</translation>
4194         </message>
4195         <message>
4196             <source>REVOLUTION_1D</source>
4197             <translation>Revolution of 1D elements</translation>
4198         </message>
4199         <message>
4200             <source>REVOLUTION_2D</source>
4201             <translation>Revolution of 2D elements</translation>
4202         </message>
4203         <message>
4204             <source>REVOLUTION_AROUND_AXIS</source>
4205             <translation>Revolution around an axis</translation>
4206         </message>
4207         <message>
4208             <source>TOTAL_ANGLE</source>
4209             <translation>Total Angle</translation>
4210         </message>
4211     </context>
4212     <context>
4213         <name>SMESHGUI_SewingDlg</name>
4214         <message>
4215             <source>BORDER</source>
4216             <translation>Border</translation>
4217         </message>
4218         <message>
4219             <source>BORDER_1</source>
4220             <translation>Border 1</translation>
4221         </message>
4222         <message>
4223             <source>BORDER_2</source>
4224             <translation>Border 2</translation>
4225         </message>
4226         <message>
4227             <source>CREATE_POLYEDRS_NEAR_BOUNDARY</source>
4228             <translation>Replace affected volumes by polyedres</translation>
4229         </message>
4230         <message>
4231             <source>CREATE_POLYGONS_INSTEAD_SPLITTING</source>
4232             <translation>Create polygons instead of splitting</translation>
4233         </message>
4234         <message>
4235             <source>ERROR_1</source>
4236             <translation>Free Border1 not found by the selected nodes</translation>
4237         </message>
4238         <message>
4239             <source>ERROR_2</source>
4240             <translation>Free Border2 not found by the selected nodes</translation>
4241         </message>
4242         <message>
4243             <source>ERROR_3</source>
4244             <translation>Free Border1 and Border2 not found by the selected nodes</translation>
4245         </message>
4246         <message>
4247             <source>ERROR_4</source>
4248             <translation>No path from the first side node to the last side node have been found</translation>
4249         </message>
4250         <message>
4251             <source>ERROR_5</source>
4252             <translation>Not allowed to splite volumes on the side!</translation>
4253         </message>
4254         <message>
4255             <source>ERROR_6</source>
4256             <translation>Different number of elements selected on the sides</translation>
4257         </message>
4258         <message>
4259             <source>ERROR_7</source>
4260             <translation>Element sets are topologically different or given nodes are inconvenient</translation>
4261         </message>
4262         <message>
4263             <source>ERROR_8</source>
4264             <translation>Nodes on the side 1 are either not linked or not laying on the element set boundary</translation>
4265         </message>
4266         <message>
4267             <source>ERROR_9</source>
4268             <translation>Nodes on the side 2 are either not linked or not laying on the element set boundary</translation>
4269         </message>
4270         <message>
4271             <source>FIRST_NODE_ID</source>
4272             <translation>First Node ID</translation>
4273         </message>
4274         <message>
4275             <source>LAST_NODE_ID</source>
4276             <translation>Last Node ID</translation>
4277         </message>
4278         <message>
4279             <source>MERGE_EQUAL_ELEMENTS</source>
4280             <translation>Merge equal elements</translation>
4281         </message>
4282         <message>
4283             <source>NODE1_TO_MERGE</source>
4284             <translation>Node 1 To Merge</translation>
4285         </message>
4286         <message>
4287             <source>NODE2_TO_MERGE</source>
4288             <translation>Node 2 To Merge</translation>
4289         </message>
4290         <message>
4291             <source>SECOND_NODE_ID</source>
4292             <translation>Second Node ID</translation>
4293         </message>
4294         <message>
4295             <source>SEW_BORDER_TO_SIDE</source>
4296             <translation>Sew Border To Side</translation>
4297         </message>
4298         <message>
4299             <source>SEW_CONFORM_FREE_BORDERS</source>
4300             <translation>Sew Conform Free Borders</translation>
4301         </message>
4302         <message>
4303             <source>SEW_FREE_BORDERS</source>
4304             <translation>Sew Free Borders</translation>
4305         </message>
4306         <message>
4307             <source>SEW_SIDE_ELEMENTS</source>
4308             <translation>Sew Side Elements</translation>
4309         </message>
4310         <message>
4311             <source>SIDE</source>
4312             <translation>Side</translation>
4313         </message>
4314         <message>
4315             <source>SIDE_1</source>
4316             <translation>Side 1</translation>
4317         </message>
4318         <message>
4319             <source>SIDE_2</source>
4320             <translation>Side 2</translation>
4321         </message>
4322     </context>
4323     <context>
4324         <name>SMESHGUI_ShapeByMeshDlg</name>
4325         <message>
4326             <source>CAPTION</source>
4327             <translation>Find geometry by mesh element</translation>
4328         </message>
4329     </context>
4330     <context>
4331         <name>SMESHGUI_SingleEditDlg</name>
4332         <message>
4333             <source>EDGE_BETWEEN</source>
4334             <translation>Edge between neighboring triangles</translation>
4335         </message>
4336     </context>
4337     <context>
4338         <name>SMESHGUI_SmoothingDlg</name>
4339         <message>
4340             <source>CENTROIDAL</source>
4341             <translation>Centroidal</translation>
4342         </message>
4343         <message>
4344             <source>FIXED_NODES_IDS</source>
4345             <translation>Fixed nodes ids</translation>
4346         </message>
4347         <message>
4348             <source>IS_PARAMETRIC</source>
4349             <translation>in parametric space</translation>
4350         </message>
4351         <message>
4352             <source>ITERATION_LIMIT</source>
4353             <translation>Iteration limit</translation>
4354         </message>
4355         <message>
4356             <source>LAPLACIAN</source>
4357             <translation>Laplacian</translation>
4358         </message>
4359         <message>
4360             <source>MAX_ASPECT_RATIO</source>
4361             <translation>Max. aspect ratio</translation>
4362         </message>
4363         <message>
4364             <source>METHOD</source>
4365             <translation>Method</translation>
4366         </message>
4367     </context>
4368     <context>
4369         <name>SMESHGUI_TrianglesInversionDlg</name>
4370         <message>
4371             <source>CAPTION</source>
4372             <translation>Diagonal inversion</translation>
4373         </message>
4374     </context>
4375     <context>
4376         <name>SMESHGUI_UnionOfTrianglesDlg</name>
4377         <message>
4378             <source>CAPTION</source>
4379             <translation>Union of triangles</translation>
4380         </message>
4381         <message>
4382             <source>MAXIMUM_ANGLE</source>
4383             <translation>Maximum bending angle</translation>
4384         </message>
4385     </context>
4386     <context>
4387         <name>SMESHGUI_UnionOfTwoTrianglesDlg</name>
4388         <message>
4389             <source>CAPTION</source>
4390             <translation>Union of two triangles</translation>
4391         </message>
4392     </context>
4393     <context>
4394         <name>SMESHGUI_WhatIsDlg</name>
4395         <message>
4396             <source>ENTITY_TYPE</source>
4397             <translation>Element type</translation>
4398         </message>
4399         <message>
4400             <source>GRAVITY_CENTER</source>
4401             <translation>Gravity center</translation>
4402         </message>
4403     </context>
4404     <context>
4405         <name>SMESHGUI_FileInfoDlg</name>
4406         <message>
4407             <source>CAPTION</source>
4408             <translation>File information</translation>
4409         </message>
4410         <message>
4411             <source>FILE_NAME</source>
4412             <translation>File name</translation>
4413         </message>
4414         <message>
4415             <source>FILE_SIZE</source>
4416             <translation>File size (bytes)</translation>
4417         </message>
4418         <message>
4419             <source>MED_VERSION</source>
4420             <translation>MED version</translation>
4421         </message>
4422     </context>
4423 </TS>