[modules/smesh.git] / doc / salome / gui / SMESH / input / selection_filter_library.doc

/*!

\page selection_filter_library_page Selection filter library

\n Selection filter library is a powerful tool enabling to create
filters to be used on meshes. You can access to it from the Main Menu
via <b>Tools / Selection filter library</b>.

\image html selectionfilterlibrary.png

<b>Library file name</b> shows the path and the file name where your
filters will be stored. By clicking the <em>Browse</em> button you can
load an existing filter library.
\n <b>Names of filters</b> lists the filters created or uploaded for
the current study. You can \b Add or \b Delete filters.
\n In <b>Filter name</b> box you can specify the name for your
filter. By default it is prefixed with the corresponding entity type.

When we use filters during a group creation or another operation (by 
clicking <b>Set Filters</b> button in the corresponding dialog), the
menu for setting filters looks a bit differently (see the image below).

\anchor filtering_elements

Each filter can be applicable to \b Nodes, \b Edges, \b Faces or \b
Volumes. You can combine many criteria in one filter, but they all
must be of the same <b>Entity type</b>. <br>
The \b Add button creates a new criterion at the end of the list of
criteria. The \b Insert button creates a new criterion before the
selected criterion. The \b Remove button deletes the selected
criterion. The \b Clear button deletes all criteria.
\n Each <b>Entity type</b> has its specific list of criteria, however all
filters have common syntax. For each criterion you should specify the
<b>Threshold Value</b> and whether we search for the elements that should be
\b More, \b Less or \b Equal to this \b Value. You can also reverse the
sense of a criterion using \b Unary operator Not and you should
specify logical relations between criteria using \b Binary operators
Or and And.
\n Some criteria should have the additional parameter of \b Tolerance.
<br> 
Switching on <b>Insert filter in viewer</b> checkbox limits
selection of elements in the Viewer to the current filter.
<br>
In the \b Source field you choose if the filter will be applied to
the whole \b Mesh, the <b>Initial Selection</b> or the <b>Current
Dialog</b>. If \b Mesh is chosen, the elements satisfying the filter
will be selected in the 3D Viewer. If <b> Initial Selection</b> is
chosen, the filter will be applied to the selected elements and the
elements rejected by the filter will be deselected. If <b>Current
Dialog</b> is chosen, the filter will be applied to the list of
elements in the current dialog and the elements rejected
by the filter will be removed from the list.
<br>
<b>Copy from...</b> button gives you a possibility to load an
existing filter from <b>Selection filter library</b> and <b>Add
to...</b> button gives you a possibility to save your current filter
in the Library.
<br>
<b>Note:</b> If the button <b>Apply and Close</b> is disabled, there
is no selected mesh in the Object Browser and the filter can not be
created. You have to select the mesh and the button will be enabled.

\image html a-filteronfaces.png

Some criteria are applicable to all <b>Entity types</b>:
<ul><li>
<b>Belong to Geom</b> selects entities whose all nodes
lie on the shape defined by <b>Threshold Value</b>.
If the threshold shape is a sub-shape of the main shape of the mesh
the algorithm works faster, if this is any other
shape the algorithm works slower.
</li><li>
<b>Lying on Geom</b> selects entities whose at least one node
lies on the shape defined by the <b>Threshold Value</b>.
If the threshold shape is a sub-shape of the main shape of the mesh the
algorithm works faster, if this is any other
shape, the algorithm works slower.
</li><li>
<b>Belong to Mesh Group</b> selects entities included into a mesh group
defined by <b>Threshold Value</b>.
</li><li>
<b>Range of IDs</b> allows selection of entities with the specified
IDs. 
<b>Threshold Value</b> can be, for example: "1,2,3,50-60,63,67,70-78"
</li><li>
<b>Color of Group</b> allows selection of entities belonging to the Group with
the color defined by the <b>Threshold Value</b>.
</li><li>
<b>Elements of a domain</b> allows selection of entities belonging to
one domain of a mesh. The domain is mesh part not connected to
other parts. <b>Threshold Value</b> locating any element of the domain can be either
- node ID (that you can pick in the Viewer) or
- geometrical vertex (that you can pick either in the Viewer or in the
  Object Browser) or
- 3 coordinates of a point (that you can enter in TUI mode only).

</li>
</ul>

Some criteria are applicable to all <b>Entity types</b>, except for
<b>Nodes</b>
<ul><li>
<b>Linear</b> allows selection of Linear or Quadratic elements (if Unary is set to "Not")
</li><li>
<b>Geometry type</b> allows selection of elements by their geometric type
defined by the <b>Threshold Value</b>. The list of available geometric
types depends on the element entity type defined by the <b>Threshold Value</b>.
</li>
</ul>

The following criteria are applicable to all <b>Entity types</b>
except for <b>Volumes</b>:
<ul><li>
<b>Belong to Plane</b> selects entities whose all nodes belong to a
specified plane within a given <b>Tolerance</b>.
</li><li>
<b>Belong to Cylinder</b> selects entities whose all nodes belong to a
specified cylinder within a given <b>Tolerance</b>.
</li><li>
<b>Belong to Surface</b> selects entities whose all nodes belong to a
specified arbitrary surface within a given <b>Tolerance</b>.
</li>
</ul>

The following criteria allow selecting mesh <b>Nodes</b>:
<ul><li>
<b>Free nodes</b> selects nodes not belonging to any mesh element.
</li><li>
<b>Double nodes</b> selects a node coincident with other nodes 
(within a given <b>Tolerance</b>). 
See also \ref tui_double_nodes_control "Double Nodes quality control".
</li>
</ul>

The following criteria allow selecting mesh <b>Edges</b>:
<ul><li>
<b>Free Borders</b> selects free 1D mesh elements, i.e. edges belonging to 
one face only. See also a
\ref free_borders_page "Free Borders quality control".
</li><li>
<b>Double edges</b> selects 1D mesh elements basing on the same set of nodes.
See also \ref filter_double_elements "Double Elements quality control".
</li><li>
<b>Borders at Multi-Connections</b> selects edges belonging to several faces.
The number of faces should be more, less or equal (within a given <b>Tolerance</b>)
to the predefined <b>Threshold Value</b>. See also a
\ref borders_at_multi_connection_page "Borders at Multi-Connection quality control".
</li><li>
<b>Length</b> selects edges with a value of length, which is more, less or equal
(within a given <b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
See also a
\ref length_page "Length quality control".
</li>
</ul>

The following criteria allow selecting mesh <b>Faces</b>:
<ul><li>
<b>Aspect ratio</b> selects 2D mesh elements with an aspect ratio (see also an
\ref aspect_ratio_page "Aspect Ratio quality control"), which is more, less or equal
(within a given <b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
</li><li>
<b>Warping</b> selects quadrangles with warping angle (see also a
\ref warping_page "Warping quality control"), which is more, less or equal
(within a given <b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
</li><li>
<b>Minimum angle</b> selects triangles and quadrangles with minimum angle (see also a
\ref minimum_angle_page "Minimum angle quality control"), which is more, less or equal
(within a given <b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
</li><li>
<b>Taper</b> selects quadrangles cells with taper value (see also a
\ref taper_page "Taper quality control"), which is more, less or equal (within a given
<b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
</li><li>
<b>Skew</b> selects triangles and quadrangles with skew value (see also a
\ref skew_page "Skew quality control"), which is more, less or equal (within a given
<b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
</li><li>
<b>Area</b> selects triangles and quadrangles with a value of area (see also an
\ref area_page "Area quality control"), which is more, less or equal (within a given
<b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
</li><li>
<b>Free edges</b> selects 2D mesh elements consisting of edges belonging to 
one element of mesh only. See also a
\ref free_edges_page "Free Edges quality control".
</li><li>
<b>Free faces</b> selects 2D mesh elements, which belong to less than two volumes.
</li><li>
<b>Double faces</b> selects 2D mesh elements basing on the same set of nodes.
See also \ref filter_double_elements "Double Elements quality control".
</li><li>
<b>Faces with bare border</b> selects 2D mesh elements having a free border without an edge on it.
See also \ref bare_border_faces_page "Bare border faces quality control".
</li><li>
<b>Over-constrained faces</b> selects 2D mesh elements having only one border shared 
with other 2D elements.
See also \ref over_constrained_faces_page "Over-constrained faces quality control".
</li><li>
<b>Borders at Multi-Connections 2D</b> selects cells consisting of edges belonging to
several elements of mesh. The number of mesh elements should be more, less or equal
(within a given <b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
See also a
\ref borders_at_multi_connection_2d_page "Borders at Multi-Connection 2D quality control".
</li><li>
<b>Length 2D</b> selects triangles and quadrangles combining of the edges with a value of
length, which is more, less or equal (within a given <b>Tolerance</b>) to the predefined
<b>Threshold Value</b>. See also a
\ref length_2d_page "Length 2D quality control".
</li><li>
<b>Coplanar faces</b> selects mesh faces neighboring the one selected
by ID in <b>Threshold Value</b> field, if the angle between the
normal to the neighboring face and the normal to the selected face is less then the
angular tolerance (defined in degrees). Selection continues among all neighbor faces of already 
selected ones.<br>
</li><li>
<b>Element Diameter 2D</b> selects triangles and quadrangles composed of the edges and
diagonals with a value of length, which is more, less or equal
(within a given <b>Tolerance</b>) to the predefined <b>Threshold Value</b>. See also a
\ref max_element_length_2d_page "Element Diameter 2D quality control".
</li>
</ul>

The following criteria allow selecting  mesh <b>Volumes</b>:
<ul><li>
<b>Aspect ratio 3D</b> selects 3D mesh elements with an aspect ratio (see also an
\ref aspect_ratio_3d_page "Aspect Ratio 3D quality control"), which is more, less or equal
(within a given <b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
</li><li>
<b>Volume</b> selects 3D mesh elements with a value of volume (see also a
\ref volume_page "Volume quality control"), which is more, less or equal (within a given
<b>Tolerance</b>) to the predefined <b>Threshold Value</b>.
</li><li>
<b>Element Diameter 3D</b> selects 3D mesh elements composed of the edges and
diagonals with a value of length, which is more, less or equal
(within a given <b>Tolerance</b>) to the predefined <b>Threshold Value</b>. See also a
\ref max_element_length_3d_page "Element Diameter 3D quality control".
</li><li>
<b>Double volumes</b> selects 3D mesh elements basing on the same set of nodes.
See also \ref filter_double_elements "Double Elements quality control".
</li><li>
<b>Bad oriented volume</b> selects mesh volumes, which are incorrectly oriented from
the point of view of MED convention.
</li><li>
<b>Over-constrained volumes</b> selects mesh volumes having only one facet shared 
with other volumes.
See also \ref over_constrained_volumes_page "Over-constrained volumes quality control".
</li><li>
<b>Volumes with bare border</b> selects 3D mesh elements having a free border without a face on it.
See also \ref bare_border_volumes_page "Bare border volumes quality control".
</li>
</ul>


*/