From fbda692c52040101dfbf384265363dcd8bc551d9 Mon Sep 17 00:00:00 2001 From: azv Date: Thu, 1 Nov 2018 16:13:28 +0300 Subject: [PATCH] Update "big models" tests --- test.models/CSWA.py | 74 +++++++++++------------ test.models/angle30.py | 46 +++++++------- test.models/bearing_puller.py | 40 ++++++------- test.models/bobine_film_reel.py | 29 ++++----- test.models/bracket32.py | 26 ++++---- test.models/bushing.py | 6 +- test.models/case24.py | 94 ++++++++++++++--------------- test.models/clothespin.py | 102 ++++++++++++++++---------------- test.models/ecran.py | 56 +++++++++--------- test.models/flange.py | 12 ++-- test.models/gear.py | 6 +- test.models/idler_plate.py | 20 +++---- test.models/piece_02.py | 88 +++++++++++++-------------- test.models/piece_09.py | 64 ++++++++++---------- test.models/piece_12.py | 95 ++++++++++++++--------------- test.models/plug.py | 38 ++++++------ test.models/sprocket.py | 2 +- test.models/wheel_rim.py | 2 +- 18 files changed, 402 insertions(+), 398 deletions(-) diff --git a/test.models/CSWA.py b/test.models/CSWA.py index b1f5181dc..62d919fa8 100644 --- a/test.models/CSWA.py +++ b/test.models/CSWA.py @@ -93,24 +93,24 @@ SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin")) SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.coordinates()) SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15") model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchLine_10f-SketchArc_1_2r-SketchArc_2_2r")], model.selection(), "b/2", "b/2") -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1")) -SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1")) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchArc_2_2r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchLine_10f")], model.selection(), "b/2", "b/2") +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face")) +SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1/To_Face]")) SketchCircle_1 = Sketch_2.addCircle(-15, 35.00000000000001, 25) SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchCircle_1.center()) SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16") SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], "50/2") model.do() -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")]) -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4")) -SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4")) -SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4")) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f_wire")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")]) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "_weak_name_6_ExtrusionCut_1_1")) +SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9][_weak_name_6_ExtrusionCut_1_1]")) +SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9][_weak_name_6_ExtrusionCut_1_1]")) SketchArc_3 = Sketch_3.addArc(-15, 35.00000000000001, -15, 46.0103340429751, -17.02045759563166, 24.17663606626138, True) SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchPoint_3.result(), SketchArc_3.center()) SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17") SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_11.result(), SketchArc_3.startPoint()) SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18") -SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4")) +SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][_weak_name_6_ExtrusionCut_1_1]")) SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchArc_4.results()[1]) SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19") SketchLine_12 = Sketch_3.addLine(-15, 46.0103340429751, -15, 35.00000000000001) @@ -127,20 +127,20 @@ SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchArc_3.results()[1] SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24") model.do() ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_3_2f-SketchLine_12f-SketchArc_5_2r")], model.selection(), 5, 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face_1")) -SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionFuse_1_1/Modfied_4&ExtrusionFuse_1_1/Modfied_5&ExtrusionFuse_1_1/To_Face_1")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face")) +SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "[(ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchArc_1_2)(ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_3_2)(ExtrusionFuse_1_1/To_Face)][(ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9)(ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_3_2)(ExtrusionFuse_1_1/To_Face)][ExtrusionFuse_1_1/To_Face]")) SketchCircle_2 = Sketch_4.addCircle(-15, 35.00000000000001, 5) SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchCircle_2.center()) SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25") SketchConstraintRadius_4 = Sketch_4.setRadius(SketchCircle_2.results()[1], "10/2") model.do() ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_2_2f")], model.selection(), 8, 0, [model.selection("SOLID", "ExtrusionFuse_1_1")]) -Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1")) -SketchArc_6 = Sketch_5.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&ExtrusionFuse_1_1/Modfied_3")) +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face")) +SketchArc_6 = Sketch_5.addArc(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchArc_1_2]")) SketchArc_7 = Sketch_5.addArc(-45, 35, -45, 5, -25.41666666666737, 12.27351642784166, False) SketchConstraintCoincidence_25 = Sketch_5.setCoincident(SketchArc_6.result(), SketchArc_7.center()) SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26") -SketchCircle_3 = Sketch_5.addCircle(model.selection("EDGE", "ExtrusionFuse_2_1/Modfied_5&ExtrusionFuse_2_1/To_Face_1")) +SketchCircle_3 = Sketch_5.addCircle(model.selection("EDGE", "[(ExtrusionFuse_2_1/Modified_Face&ExtrusionFuse_1_1/To_Face)(ExtrusionFuse_2_1/To_Face)][ExtrusionFuse_2_1/To_Face]")) SketchArc_8 = Sketch_5.addArc(-15, 35.00000000000001, -25.41666666666737, 12.27351642784166, -30.00000000000075, 14.99999999999944, True) SketchConstraintCoincidence_26 = Sketch_5.setCoincident(SketchCircle_3.result(), SketchArc_8.center()) SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27") @@ -163,20 +163,20 @@ SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_33") SketchConstraintCoincidence_33 = Sketch_5.setCoincident(SketchArc_9.startPoint(), SketchLine_13.endPoint()) SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_34") model.do() -ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchLine_13r-SketchArc_9_2r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")]) -Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modfied_3")) -SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7")) +ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchArc_9_2r-SketchLine_13r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")]) +Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face")) +SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]")) SketchArc_10 = Sketch_6.addArc(55, 35, 55, 15, 35, 35, True) SketchConstraintCoincidence_34 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.center()) SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35") SketchConstraintCoincidence_35 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.startPoint()) SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36") -SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_8")) -SketchConstraintDistance_8 = Sketch_6.setDistance(SketchArc_10.center(), SketchLine_15.result(), 35) +SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4]")) +SketchConstraintDistance_8 = Sketch_6.setDistance(SketchArc_10.center(), SketchLine_15.result(), 35, False) SketchLine_16 = Sketch_6.addLine(35, 35, 35, 48) SketchConstraintCoincidence_36 = Sketch_6.setCoincident(SketchArc_10.endPoint(), SketchLine_16.startPoint()) SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_37") -SketchLine_17 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_6")) +SketchLine_17 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]")) SketchConstraintCoincidence_37 = Sketch_6.setCoincident(SketchLine_16.endPoint(), SketchLine_17.result()) SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_38") SketchConstraintVertical_6 = Sketch_6.setVertical(SketchLine_16.result()) @@ -193,23 +193,23 @@ SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_41") SketchConstraintCoincidence_41 = Sketch_6.setCoincident(SketchLine_14.endPoint(), SketchLine_19.endPoint()) SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42") model.do() -ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_10_2f-SketchLine_16r-SketchLine_18f-SketchLine_19r")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")]) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/From_Face_1")) +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Face-SketchArc_10_2f-SketchLine_18f-SketchLine_19r-SketchLine_16r_wire")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")]) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/From_Face")) SketchCircle_4 = Sketch_7.addCircle(45, -35, 5) -SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/From_Face_1")) -SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10) +SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_5][ExtrusionCut_2_1/From_Face]")) +SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10, False) SketchConstraintRadius_6 = Sketch_7.setRadius(SketchCircle_4.results()[1], "10/2") SketchLine_21 = Sketch_7.addLine(35, -35, 45, -35) SketchLine_21.setAuxiliary(True) -SketchPoint_5 = Sketch_7.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Generated_Face_1&ExtrusionCut_2_1/Generated_Face_4&ExtrusionCut_2_1/From_Face_1")) +SketchPoint_5 = Sketch_7.addPoint(model.selection("VERTEX", "[ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchLine_16][ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchArc_10_2][ExtrusionCut_2_1/From_Face]")) SketchConstraintCoincidence_42 = Sketch_7.setCoincident(SketchLine_21.startPoint(), SketchPoint_5.result()) SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43") SketchConstraintCoincidence_43 = Sketch_7.setCoincident(SketchCircle_4.center(), SketchLine_21.endPoint()) SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_44") SketchConstraintHorizontal_4 = Sketch_7.setHorizontal(SketchLine_21.result()) model.do() -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4")) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8")) SketchLine_22 = Sketch_8.addLine(55, 25, 5.000000000000002, 25) SketchLine_23 = Sketch_8.addLine(5.000000000000002, 25, 5.000000000000002, 13) SketchLine_24 = Sketch_8.addLine(5.000000000000002, 13, 55, 13) @@ -228,21 +228,21 @@ SketchConstraintHorizontal_6 = Sketch_8.setHorizontal(SketchLine_24.result()) SketchConstraintVertical_8 = Sketch_8.setVertical(SketchLine_25.result()) SketchConstraintLength_2 = Sketch_8.setLength(SketchLine_22.result(), 50) SketchConstraintLength_3 = Sketch_8.setLength(SketchLine_25.result(), 12) -SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/Modfied_1")) +SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_5][ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_6]"), False) SketchLine_26 = SketchProjection_1.createdFeature() SketchConstraintCoincidence_48 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_26.result()) SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_49") -SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&Extrusion_1_1/Generated_Face_4")) +SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "[ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8]")) SketchConstraintCoincidence_49 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_27.result()) SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50") model.do() -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) -Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modfied_2")) +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22r-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) +Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9")) SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320836, -63) -SketchLine_29 = Sketch_9.addLine(model.selection("EDGE", "ExtrusionFuse_1_1/Modfied_2&ExtrusionCut_4_1/Modfied_6")) +SketchLine_29 = Sketch_9.addLine(model.selection("EDGE", "[ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9][ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_8]")) SketchConstraintCoincidence_50 = Sketch_9.setCoincident(SketchLine_28.endPoint(), SketchLine_29.result()) SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_51") -SketchLine_30 = Sketch_9.addLine(model.selection("EDGE", "ExtrusionCut_4_1/Modfied_9&ExtrusionFuse_1_1/Modfied_2")) +SketchLine_30 = Sketch_9.addLine(model.selection("EDGE", "[ExtrusionCut_4_1/Modified_Face&Extrusion_1_1/From_Face][ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9]")) SketchConstraintCoincidence_51 = Sketch_9.setCoincident(SketchLine_28.startPoint(), SketchLine_30.result()) SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52") SketchConstraintAngle_3 = Sketch_9.setAngle(SketchLine_28.result(), SketchLine_30.result(), 20) @@ -258,16 +258,16 @@ SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_55") SketchConstraintCoincidence_55 = Sketch_9.setCoincident(SketchLine_28.startPoint(), SketchLine_32.endPoint()) SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_56") model.do() -ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_28f-SketchLine_31f-SketchLine_32f")], model.selection(), model.selection(), 0, model.selection("FACE", "ExtrusionCut_4_1/Modfied_3"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) -Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1")) +ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_28r-SketchLine_31f-SketchLine_32f")], model.selection(), model.selection(), 0, model.selection("FACE", "ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_5"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) +Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8")) SketchCircle_5 = Sketch_10.addCircle(-6.000000000000002, 4.999999999999997, 5) -SketchLine_33 = Sketch_10.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_5_1/Modfied_1")) +SketchLine_33 = Sketch_10.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8]")) SketchConstraintDistance_11 = Sketch_10.setDistance(SketchCircle_5.center(), SketchLine_33.result(), 30) -SketchLine_34 = Sketch_10.addLine(model.selection("EDGE", "ExtrusionCut_5_1/Modfied_2&ExtrusionCut_5_1/Modfied_1")) +SketchLine_34 = Sketch_10.addLine(model.selection("EDGE", "[ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_9][ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8]")) SketchConstraintDistance_12 = Sketch_10.setDistance(SketchCircle_5.result(), SketchLine_34.result(), 9) SketchConstraintRadius_7 = Sketch_10.setRadius(SketchCircle_5.results()[1], "10/2") model.do() -ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchCircle_5_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), 0, [model.selection("SOLID", "ExtrusionCut_5_1")]) +ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchCircle_5_2r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"), 0, [model.selection("SOLID", "ExtrusionCut_5_1")]) model.do() # Test reexecution after parameter change diff --git a/test.models/angle30.py b/test.models/angle30.py index 5a37ad7d3..71b223707 100644 --- a/test.models/angle30.py +++ b/test.models/angle30.py @@ -129,7 +129,7 @@ SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_16.result()) SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_15.result()) SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_13.result()) -SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")) +SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_4")) SketchConstraintParallel_2 = Sketch_3.setParallel(SketchLine_14.result(), SketchLine_17.result()) SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_14.endPoint(), SketchLine_17.result(), 1, False) SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ")) @@ -138,7 +138,7 @@ SketchConstraintDistance_8 = Sketch_3.setDistance(SketchLine_13.startPoint(), Sk SketchLine_19 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY")) SketchConstraintDistance_9 = Sketch_3.setDistance(SketchLine_15.endPoint(), SketchLine_19.result(), 70, False) model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 75, 45) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2r-SketchCircle_2_2r_wire")], model.selection(), 75, 45) Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22) Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")]) Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("XOY")) @@ -298,7 +298,7 @@ SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_36.startPoint SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_57") SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_34.endPoint()) SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_58") -SketchCircle_3 = Sketch_4.addCircle(model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2")) +SketchCircle_3 = Sketch_4.addCircle(model.selection("EDGE", "Sketch_2/SketchCircle_1_2")) SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchCircle_3.results()[1]) SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_59") SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchArc_4.endPoint(), SketchCircle_3.results()[1]) @@ -379,18 +379,18 @@ Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) SketchLine_38 = Sketch_5.addLine(44, 3.464101615137744, 16.50000000000003, 51.09549882328188) SketchLine_38.setName("SketchLine_41") SketchLine_38.result().setName("SketchLine_41") -SketchPoint_5 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e")) +SketchPoint_5 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/SketchLine_4_EndVertex")) SketchConstraintCoincidence_69 = Sketch_5.setCoincident(SketchLine_38.startPoint(), SketchPoint_5.result()) SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_73") -SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")) +SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "Sketch_1/SketchLine_4")) SketchLine_39.setName("SketchLine_42") SketchLine_39.result().setName("SketchLine_42") SketchConstraintPerpendicular_2 = Sketch_5.setPerpendicular(SketchLine_38.result(), SketchLine_39.result()) SketchConstraintLength_1 = Sketch_5.setLength(SketchLine_38.result(), 55) SketchConstraintLength_1.setName("SketchConstraintLength_6") model.do() -Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e")) -Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_41e"), False) +Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_8r-SketchArc_1_2r-SketchLine_9r-SketchLine_3r-SketchLine_11r-SketchArc_2_2f-SketchLine_10r"), model.selection("VERTEX", "Sketch_1/SketchLine_4_EndVertex")) +Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/SketchLine_41_EndVertex"), False) Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchLine_40 = Sketch_6.addLine(3.999999999999999, 13.00000000002605, 4, 12.89999999999998) SketchLine_40.setName("SketchLine_55") @@ -459,7 +459,7 @@ SketchConstraintDistance_20 = Sketch_6.setDistance(SketchLine_48.startPoint(), S SketchConstraintDistance_20.setName("SketchConstraintDistance_20") SketchConstraintDistance_21 = Sketch_6.setDistance(SketchLine_51.startPoint(), SketchLine_49.result(), 0.8, False) SketchConstraintDistance_21.setName("SketchConstraintDistance_21") -SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_41")) +SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/SketchLine_41")) SketchLine_52.setName("SketchLine_51") SketchLine_52.result().setName("SketchLine_51") SketchConstraintDistance_22 = Sketch_6.setDistance(SketchLine_45.startPoint(), SketchLine_52.result(), 4, False) @@ -517,23 +517,23 @@ SketchLine_53.result().setName("SketchLine_56") SketchConstraintCoincidence_90 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_53.result()) SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_94") model.do() -Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_55r-SketchLine_44r-SketchLine_52r-SketchLine_53r-SketchLine_54r-SketchLine_47r-SketchLine_48r-SketchLine_49r-SketchArc_12_2r-SketchArc_13_2r")], model.selection(), 0, 40) +Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchArc_13_2r-SketchLine_54r-SketchLine_49r-SketchLine_48r-SketchLine_47r-SketchLine_53r-SketchArc_12_2r-SketchLine_52r-SketchLine_44r-SketchLine_55r")], model.selection(), 0, 40) Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Common_1_1")], [model.selection("SOLID", "Common_2_1")]) Fuse_2 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Fuse_1_1")], [model.selection("SOLID", "Extrusion_7_1")]) Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Fuse_2_1")], [model.selection("SOLID", "Common_3_1")]) -Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_1")) +Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_6r-SketchLine_8r-SketchArc_1_2r-SketchLine_9r-SketchLine_3r-SketchLine_11r-SketchArc_2_2f-SketchLine_10r_wire")], model.selection(), 55, 55) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10")) SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60) SketchLine_54.setName("SketchLine_66") SketchLine_54.result().setName("SketchLine_66") -SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/To_Face_1")) +SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/To_Face]")) SketchLine_55 = Sketch_7.addLine(55, -9.237604307034024, 55, -70) SketchLine_55.setName("SketchLine_57") SketchLine_55.result().setName("SketchLine_57") SketchLine_55.setAuxiliary(True) SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchPoint_6.result()) SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_95") -SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/To_Face_1")) +SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/To_Face]")) SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchPoint_7.result()) SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_96") SketchLine_56 = Sketch_7.addLine(45.00000000000001, -70, -45.00000000000001, -70) @@ -545,7 +545,7 @@ SketchLine_57.result().setName("SketchLine_58") SketchLine_57.setAuxiliary(True) SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchLine_57.startPoint()) SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_97") -SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/From_Face_1")) +SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/From_Face]")) SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchPoint_8.result()) SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_98") SketchLine_58 = Sketch_7.addLine(-55.00000000000001, -59.99999999999999, -55, -9.237604307034024) @@ -557,7 +557,7 @@ SketchLine_59.result().setName("SketchLine_59") SketchLine_59.setAuxiliary(True) SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint()) SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_99") -SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/From_Face_1")) +SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/From_Face]")) SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_9.result()) SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_100") SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -60.00000000000001, -9.237604307034024) @@ -654,7 +654,7 @@ SketchCircle_7 = Sketch_7.addCircle(-44, -20.23760430703402, 5) SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5) SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11, False) SketchConstraintDistance_31.setName("SketchConstraintDistance_31") -SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1")) +SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10]")) SketchLine_66.setName("SketchLine_69") SketchLine_66.result().setName("SketchLine_69") SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11, False) @@ -669,20 +669,20 @@ SketchConstraintLength_3 = Sketch_7.setLength(SketchLine_61.result(), 70) SketchConstraintLength_3.setName("SketchConstraintLength_8") SketchConstraintDistanceHorizontal_1 = Sketch_7.setHorizontalDistance(SketchPoint_7.coordinates(), SketchLine_62.endPoint(), 5) model.do() -ExtrusionCut_1_objects_1 = [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")] +ExtrusionCut_1_objects_1 = [model.selection("WIRE", "Sketch_7/Face-SketchLine_66r-SketchArc_14_2r-SketchLine_67f-SketchArc_15_2r-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f_wire"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")] ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")]) -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_3")) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11")) SketchLine_67 = Sketch_8.addLine(55, -34.06366588218793, 55, 66.69872981077805) SketchLine_67.setName("SketchLine_79") SketchLine_67.result().setName("SketchLine_79") -SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_13")) +SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][ExtrusionCut_1_1/Modified_Face&Extrusion_8_1/To_Face&weak_name_1]")) SketchLine_68 = Sketch_8.addLine(55, -34.06366588218793, 55, 76.69872981077803) SketchLine_68.setName("SketchLine_70") SketchLine_68.result().setName("SketchLine_70") SketchLine_68.setAuxiliary(True) SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_10.result()) SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_120") -SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_13&Extrusion_8_1/Generated_Face_4")) +SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][ExtrusionCut_1_1/Modified_Face&Extrusion_8_1/To_Face&weak_name_1][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3]")) SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_11.result()) SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_121") SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -44.9999999570576, 76.69872981077805) @@ -694,7 +694,7 @@ SketchLine_70.result().setName("SketchLine_71") SketchLine_70.setAuxiliary(True) SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint()) SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_122") -SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3&Extrusion_8_1/Generated_Face_4")) +SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Extrusion_8_1/From_Face&weak_name_1][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3]")) SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_12.result()) SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_123") SketchLine_71 = Sketch_8.addLine(-55, 66.69872976783566, -55, -34.06366588218793) @@ -706,7 +706,7 @@ SketchLine_72.result().setName("SketchLine_72") SketchLine_72.setAuxiliary(True) SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint()) SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_124") -SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3")) +SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2][ExtrusionCut_1_1/Modified_Face&Extrusion_8_1/From_Face&weak_name_1][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11]")) SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_13.result()) SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_125") SketchLine_73 = Sketch_8.addLine(-55, -34.06366588218793, -83.25521566485324, -34.06366588218793) @@ -846,7 +846,7 @@ SketchConstraintDistance_43.setName("SketchConstraintDistance_45") SketchConstraintDistance_44 = Sketch_8.setDistance(SketchArc_18.startPoint(), SketchLine_69.result(), 25, False) SketchConstraintDistance_44.setName("SketchConstraintDistance_46") model.do() -ExtrusionCut_2_objects_1 = [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")] +ExtrusionCut_2_objects_1 = [model.selection("FACE", "Sketch_8/Face-SketchLine_77r-SketchLine_76r-SketchLine_75r-SketchLine_74r-SketchLine_73r-SketchLine_81r-SketchArc_17_2r-SketchLine_80r-SketchArc_16_2r-SketchLine_79r"), model.selection("WIRE", "Sketch_8/Face-SketchCircle_8_2f_wire"), model.selection("WIRE", "Sketch_8/Face-SketchCircle_9_2f_wire"), model.selection("WIRE", "Sketch_8/Face-SketchArc_19_2f-SketchLine_82f-SketchArc_18_2f-SketchLine_83r_wire")] ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")]) Fuse_3 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "ExtrusionCut_2_1")]) model.do() diff --git a/test.models/bearing_puller.py b/test.models/bearing_puller.py index 5a20aecd3..ce59dc0f9 100644 --- a/test.models/bearing_puller.py +++ b/test.models/bearing_puller.py @@ -98,15 +98,15 @@ SketchLine_7.result().setName("SketchLine_30") SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_7.result()) SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_35") model.do() -Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_4r-SketchArc_1_2f-SketchArc_2_2f-SketchLine_28r-SketchLine_29r")], model.selection("EDGE", "PartSet/OZ"), 360, 0) -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_2")) +Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_2_2f-SketchArc_1_2f-SketchLine_4r-SketchLine_29r-SketchLine_28r-SketchLine_2r-SketchLine_1r")], model.selection("EDGE", "PartSet/OZ"), 360, 0) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_2")) SketchLine_8 = Sketch_2.addLine(0, 0, 25, 43.30127018922193) SketchLine_8.setName("SketchLine_5") SketchLine_8.result().setName("SketchLine_5") SketchLine_8.setAuxiliary(True) SketchPoint_3 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin")) SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchPoint_3.result()) -SketchCircle_1 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1")) +SketchCircle_1 = Sketch_2.addCircle(model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_2][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1]")) SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchCircle_1.results()[1]) SketchLine_9 = Sketch_2.addLine(39.43375672974064, -43.30127018922192, 15.87711932209923, -2.499977343709401) SketchLine_9.setName("SketchLine_10") @@ -116,7 +116,7 @@ SketchLine_10.setName("SketchLine_6") SketchLine_10.result().setName("SketchLine_6") SketchLine_10.setAuxiliary(True) SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchPoint_3.result()) -SketchCircle_2 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1")) +SketchCircle_2 = Sketch_2.addCircle(model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_2][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1]")) SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchCircle_2.results()[1]) SketchLine_11 = Sketch_2.addLine(15.87713238415337, 2.499999967850816, 39.43375672974065, 43.30127018922192) SketchLine_11.setName("SketchLine_11") @@ -229,10 +229,10 @@ SketchLine_22.result().setName("SketchLine_19") SketchConstraintDistance_9 = Sketch_2.setDistance(SketchArc_9.center(), SketchPoint_3.coordinates(), 21) SketchConstraintDistance_9.setName("SketchConstraintDistance_8") model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_10r-SketchLine_11r-SketchArc_3_2f-SketchArc_4_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12r-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 10) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchArc_4_2f-SketchLine_11r-SketchArc_3_2f-SketchLine_10r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f-SketchLine_14r_wire"), model.selection("FACE", "Sketch_2/Face-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f-SketchLine_12r"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f_wire")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_4"), 10) Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5")]) Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_6")]) -Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Cut_2_1/Modified_Face_7"), model.selection("FACE", "Cut_2_1/Modified_Face_9")) +Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Cut_2_1/Modified_Face&Sketch_2/SketchLine_21"), model.selection("FACE", "Cut_2_1/Modified_Face&Sketch_2/SketchLine_19")) Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchCircle_3 = Sketch_3.addCircle(25, -10, 4) SketchCircle_4 = Sketch_3.addCircle(40, -10, 4) @@ -245,7 +245,7 @@ SketchConstraintDistance_10 = Sketch_3.setDistance(SketchCircle_3.center(), Sket SketchConstraintDistance_10.setName("SketchConstraintDistance_9") SketchConstraintDistance_11 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_28.result(), 40) SketchConstraintDistance_11.setName("SketchConstraintDistance_10") -SketchProjection_1 = Sketch_3.addProjection(model.selection("EDGE", "Cut_2_1/Modified_Face_divided_20_e_15_1"), False) +SketchProjection_1 = Sketch_3.addProjection(model.selection("EDGE", "Cut_2_1/Generated_Edge&Sketch_2/SketchLine_21&Sketch_1/SketchLine_2"), False) SketchLine_29 = SketchProjection_1.createdFeature() SketchLine_29.setName("SketchLine_26") SketchLine_29.result().setName("SketchLine_26") @@ -254,7 +254,7 @@ SketchConstraintDistance_12.setName("SketchConstraintDistance_11") SketchConstraintDistance_13 = Sketch_3.setDistance(SketchCircle_3.center(), SketchLine_29.result(), 10) SketchConstraintDistance_13.setName("SketchConstraintDistance_12") model.do() -Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_3/Wire-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Cut_1_1/Modified_Face_6"), 5, model.selection("FACE", "Cut_1_1/Modified_Face_8"), 5) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_3_2r"), model.selection("WIRE", "Sketch_3/Face-SketchCircle_4_2f_wire")], model.selection(), model.selection("FACE", "Cut_1_1/Modified_Face&Sketch_2/SketchLine_11"), 5, model.selection("FACE", "Cut_1_1/Modified_Face&Sketch_2/SketchLine_13"), 5) Cut_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_2_1")], [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")]) Recover_1 = model.addRecover(Part_1_doc, Cut_3, [Extrusion_2.results()[1], Extrusion_2.result()]) Rotation_1 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_1_1"), model.selection("SOLID", "Recover_1_2")], model.selection("EDGE", "PartSet/OZ"), 120) @@ -496,15 +496,15 @@ SketchConstraintCoincidence_97 = Sketch_5.setCoincident(SketchLine_49.endPoint() SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_75") SketchConstraintDistance_19 = Sketch_5.setDistance(SketchLine_49.endPoint(), SketchLine_41.result(), 10) model.do() -Face_1 = model.addFace(Part_2_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchArc_4_2f-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f-SketchArc_9_2f-SketchArc_10_2f")]) -Axis_4 = model.addAxis(Part_2_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3-SketchLine_20s")) +Face_1 = model.addFace(Part_2_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchArc_7_2f-SketchArc_8_2f-SketchArc_9_2f-SketchArc_10_2f-SketchArc_6_2f-SketchArc_5_2f-SketchArc_4_2f_wire")]) +Axis_4 = model.addAxis(Part_2_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("VERTEX", "Sketch_2/SketchArc_3")) Rotation_3 = model.addRotation(Part_2_doc, [model.selection("FACE", "Face_1_1")], model.selection("EDGE", "Axis_1"), -43.8752) -Pipe_1 = model.addPipe(Part_2_doc, [model.selection("FACE", "Rotation_1_1")], model.selection("EDGE", "Sketch_2/Edge-SketchArc_3_2")) -Extrusion_3 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchLine_15r-SketchLine_16r-SketchLine_17r")], model.selection(), "Gap/2", "Gap/2") +Pipe_1 = model.addPipe(Part_2_doc, [model.selection("FACE", "Rotation_1_1")], model.selection("EDGE", "Sketch_2/SketchArc_3_2")) +Extrusion_3 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_2_2f-SketchCircle_3_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchLine_17r-SketchLine_16r-SketchLine_15r-SketchLine_14r_wire")], model.selection(), "Gap/2", "Gap/2") Fuse_1 = model.addFuse(Part_2_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")]) Extrusion_4 = model.addExtrusion(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), "Gap", "Gap") Cut_1 = model.addCut(Part_2_doc, [model.selection("SOLID", "Fuse_1_1")], [model.selection("SOLID", "Extrusion_2_1")]) -Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Cut_1_1")], model.selection("VERTEX", "Sketch_2/Edge-SketchCircle_2_2__cc"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e")) +Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Cut_1_1")], model.selection("VERTEX", "Sketch_2/SketchCircle_2_2__cc"), model.selection("VERTEX", "Sketch_2/SketchLine_21_EndVertex")) model.do() Part_3 = model.duplicatePart(Part_2) Part_3.setName("Arm 2") @@ -547,11 +547,11 @@ SketchConstraintCoincidence_238 = Sketch_10.setCoincident(SketchPoint_7.coordina SketchLine_99 = Sketch_10.addLine(model.selection("EDGE", "PartSet/OY")) SketchConstraintDistance_35 = Sketch_10.setDistance(SketchLine_98.endPoint(), SketchLine_99.result(), "Thickness") model.do() -Revolution_2 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r-SketchLine_5r-SketchLine_6r")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"), 360, 0) -Sketch_11 = model.addSketch(Part_5_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_1")) +Revolution_2 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection("EDGE", "Sketch_1/SketchLine_6"), 360, 0) +Sketch_11 = model.addSketch(Part_5_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1")) SketchCircle_14 = Sketch_11.addCircle(0, 0, 8.5) SketchCircle_14.setAuxiliary(True) -SketchPoint_8 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_6e")) +SketchPoint_8 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_1/SketchLine_1_StartVertex")) SketchConstraintCoincidence_239 = Sketch_11.setCoincident(SketchCircle_14.center(), SketchPoint_8.result()) SketchConstraintRadius_18 = Sketch_11.setRadius(SketchCircle_14.results()[1], "(Rod+5)/2") SketchLine_100 = Sketch_11.addLine(-8.5, -4.907477288111821, -8.5, 4.907477288111821) @@ -579,7 +579,7 @@ SketchConstraintEqual_8 = Sketch_11.setEqual(SketchLine_101.result(), SketchLine SketchConstraintEqual_9 = Sketch_11.setEqual(SketchLine_102.result(), SketchLine_103.result()) SketchConstraintEqual_10 = Sketch_11.setEqual(SketchLine_103.result(), SketchLine_104.result()) model.do() -Extrusion_9 = model.addExtrusion(Part_5_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_8r-SketchLine_9r-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_13r")], model.selection(), 25, 0) +Extrusion_9 = model.addExtrusion(Part_5_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13r-SketchLine_12r-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r")], model.selection(), 25, 0) Sketch_12 = model.addSketch(Part_5_doc, model.standardPlane("YOZ")) SketchLine_106 = Sketch_12.addLine(9.814954576223595, 48.99999999999999, 9.814954576223595, 52.35726558990813) SketchLine_107 = Sketch_12.addLine(9.814954576223595, 52.35726558990813, 4, 52.35726558990813) @@ -590,15 +590,15 @@ SketchConstraintCoincidence_248 = Sketch_12.setCoincident(SketchLine_106.startPo SketchConstraintHorizontal_20 = Sketch_12.setHorizontal(SketchLine_107.result()) SketchConstraintVertical_20 = Sketch_12.setVertical(SketchLine_106.result()) SketchConstraintAngle_8 = Sketch_12.setAngle(SketchLine_108.result(), SketchLine_107.result(), 30) -SketchLine_109 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3")) +SketchLine_109 = Sketch_12.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_10][Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_9]")) SketchConstraintCoincidence_249 = Sketch_12.setCoincident(SketchLine_108.endPoint(), SketchLine_109.result()) -SketchProjection_2 = Sketch_12.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1")) +SketchProjection_2 = Sketch_12.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_10][Extrusion_1_1/To_Face]"), False) SketchLine_110 = SketchProjection_2.createdFeature() SketchConstraintDistance_36 = Sketch_12.setDistance(SketchLine_110.result(), SketchLine_108.endPoint(), 1) SketchLine_111 = Sketch_12.addLine(model.selection("EDGE", "PartSet/OZ")) SketchConstraintDistance_37 = Sketch_12.setDistance(SketchLine_108.startPoint(), SketchLine_111.result(), 4) model.do() -Revolution_3 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_14f-SketchLine_15f-SketchLine_16f")], model.selection("EDGE", "PartSet/OZ"), 360, 0) +Revolution_3 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_14r-SketchLine_15f-SketchLine_16f")], model.selection("EDGE", "PartSet/OZ"), 360, 0) Cut_12 = model.addCut(Part_5_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")]) Cut_13 = model.addFuse(Part_5_doc, [model.selection("SOLID", "Cut_1_1"), model.selection("SOLID", "Revolution_1_1")], []) diff --git a/test.models/bobine_film_reel.py b/test.models/bobine_film_reel.py index 1fade828a..5a9600e24 100644 --- a/test.models/bobine_film_reel.py +++ b/test.models/bobine_film_reel.py @@ -43,8 +43,8 @@ SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchPoint_1.coordinates SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1]) model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "h", 0) -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1")) -SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face")) +SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1")) SketchLine_2 = SketchProjection_1.createdFeature() SketchCircle_2 = Sketch_2.addCircle(0, 0, 33.5) SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_2.results()[1], "R2") @@ -53,16 +53,16 @@ SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_14") model.do() Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), "h2", 0) Extrusion_3 = model.addExtrusion(Part_1_doc, [], model.selection(), "h2*3", 0) -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_1")) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face")) SketchCircle_3 = Sketch_3.addCircle(0, 0, 28.25) SketchConstraintRadius_3 = Sketch_3.setRadius(SketchCircle_3.results()[1], 28.25) -SketchProjection_2 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")) +SketchProjection_2 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1")) SketchLine_3 = SketchProjection_2.createdFeature() SketchConstraintCoincidence_6 = Sketch_3.setCoincident(SketchCircle_3.center(), SketchAPI_Line(SketchLine_3).startPoint()) Extrusion_3.setNestedSketch(Sketch_3) Extrusion_4 = model.addExtrusion(Part_1_doc, [], model.selection(), "h2", 0) -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_3_1/To_Face_1")) -SketchProjection_3 = Sketch_4.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_3_1/To_Face")) +SketchProjection_3 = Sketch_4.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1")) SketchLine_4 = SketchProjection_3.createdFeature() SketchCircle_4 = Sketch_4.addCircle(0, 0, 25.9) SketchConstraintRadius_4 = Sketch_4.setRadius(SketchCircle_4.results()[1], "R3") @@ -70,8 +70,8 @@ SketchConstraintCoincidence_7 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_15") Extrusion_4.setNestedSketch(Sketch_4) Extrusion_5 = model.addExtrusion(Part_1_doc, [], model.selection(), "h2", 0) -Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_4_1/To_Face_1")) -SketchProjection_4 = Sketch_5.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")) +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_4_1/To_Face")) +SketchProjection_4 = Sketch_5.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1")) SketchLine_5 = SketchProjection_4.createdFeature() SketchCircle_5 = Sketch_5.addCircle(0, 0, 8) SketchConstraintRadius_5 = Sketch_5.setRadius(SketchCircle_5.results()[1], 8) @@ -79,15 +79,15 @@ SketchConstraintCoincidence_8 = Sketch_5.setCoincident(SketchAPI_Line(SketchLine SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_16") Extrusion_5.setNestedSketch(Sketch_5) Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1"), model.selection("SOLID", "Extrusion_5_1"), model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_3_1")], []) -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection("FACE", "Extrusion_5_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "Fuse_1_1")]) -Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/From_Face_1")) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection("FACE", "Extrusion_5_1/To_Face"), 0, model.selection(), 0, [model.selection("SOLID", "Fuse_1_1")]) +Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/From_Face")) SketchCircle_6 = Sketch_6.addCircle(0, 0, 4.2) SketchConstraintRadius_6 = Sketch_6.setRadius(SketchCircle_6.results()[1], 4.2) SketchPoint_2 = Sketch_6.addPoint(model.selection("VERTEX", "PartSet/Origin")) SketchConstraintCoincidence_9 = Sketch_6.setCoincident(SketchPoint_2.coordinates(), SketchCircle_6.center()) SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_17") ExtrusionCut_1.setNestedSketch(Sketch_6) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_2")) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/From_Face")) SketchCircle_7 = Sketch_7.addCircle(0, -85, 66) SketchLine_6 = Sketch_7.addLine(model.selection("EDGE", "PartSet/OY")) SketchConstraintCoincidence_10 = Sketch_7.setCoincident(SketchCircle_7.center(), SketchLine_6.result()) @@ -96,8 +96,8 @@ SketchConstraintDistance_1 = Sketch_7.setDistance(SketchCircle_7.center(), Sketc SketchMultiRotation_1 = Sketch_7.addRotation([SketchCircle_7.results()[1]], SketchLine_6.startPoint(), 120, 3) [SketchCircle_8, SketchCircle_9] = SketchMultiRotation_1.rotated() model.do() -ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_1")) +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_5_1/To_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face")) SketchLine_7 = Sketch_8.addLine(-2.320957096353877e-016, 11.00000001704673, -7, 11.00000001704673) SketchConstraintHorizontal_1 = Sketch_8.setHorizontal(SketchLine_7.result()) SketchLine_8 = Sketch_8.addLine(-7, 11.00000001704673, -6.329882773485103e-016, 30.00000001704673) @@ -126,7 +126,8 @@ SketchLine_14.result().setName("SketchLine_13") SketchLine_13.setName("SketchLine_16") SketchLine_13.result().setName("SketchLine_16") model.do() -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_7r-SketchLine_8r-SketchLine_10f-SketchLine_11f"), model.selection("FACE", "Sketch_8/Face-SketchLine_16f-SketchLine_17f-SketchLine_18r-SketchLine_19r"), model.selection("FACE", "Sketch_8/Face-SketchLine_12f-SketchLine_13f-SketchLine_14r-SketchLine_15r")], model.selection(), model.selection("FACE", "ExtrusionCut_2_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3_objects_1 = [model.selection("FACE", "Sketch_8/Face-SketchLine_10f-SketchLine_11f-SketchLine_8r-SketchLine_7r"), model.selection("FACE", "Sketch_8/Face-SketchLine_16f-SketchLine_18r-SketchLine_19r-SketchLine_17f"), model.selection("FACE", "Sketch_8/Face-SketchLine_12f-SketchLine_14r-SketchLine_15r-SketchLine_13f")] +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_3_objects_1, model.selection(), model.selection("FACE", "ExtrusionCut_2_1/Modified_Face&Extrusion_4_1/To_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) # Test reexecution after parameter change Parameter_R.setValue(50) diff --git a/test.models/bracket32.py b/test.models/bracket32.py index de8e95449..cc5b65b01 100644 --- a/test.models/bracket32.py +++ b/test.models/bracket32.py @@ -389,7 +389,7 @@ SketchConstraintRadius_8 = Sketch_3.setRadius(SketchCircle_2.results()[1], "TDE/ SketchConstraintRadius_8.setName("SketchConstraintRadius_2") SketchConstraintDistance_15 = Sketch_3.setDistance(SketchCircle_2.center(), SketchCircle_1.center(), 30) SketchConstraintDistance_15.setName("SketchConstraintDistance_9") -SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")) +SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_1")) SketchLine_36.setName("SketchLine_25") SketchLine_36.result().setName("SketchLine_25") SketchConstraintDistance_16 = Sketch_3.setDistance(SketchCircle_1.center(), SketchLine_36.result(), 85) @@ -398,10 +398,10 @@ model.do() Sketch_4 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) SketchCircle_3 = Sketch_4.addCircle(0, 85, 7) SketchCircle_4 = Sketch_4.addCircle(0, 55, 7) -SketchPoint_1 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/Edge-SketchCircle_1_2__cc")) +SketchPoint_1 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/SketchCircle_1_2__cc")) SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_1.coordinates(), SketchCircle_3.center()) SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_19") -SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/Edge-SketchCircle_2_2__cc")) +SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/SketchCircle_2_2__cc")) SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_2.coordinates(), SketchCircle_4.center()) SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_20") SketchConstraintRadius_9 = Sketch_4.setRadius(SketchCircle_3.results()[1], "TDI/2") @@ -436,7 +436,7 @@ SketchConstraintMirror_2.setName("SketchConstraintMirror_3") model.do() Sketch_6 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) SketchCircle_9 = Sketch_6.addCircle(30, -41, 4) -SketchPoint_3 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Edge-SketchCircle_5_2__cc")) +SketchPoint_3 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/SketchCircle_5_2__cc")) SketchConstraintCoincidence_63 = Sketch_6.setCoincident(SketchPoint_3.coordinates(), SketchCircle_9.center()) SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_21") SketchConstraintRadius_12 = Sketch_6.setRadius(SketchCircle_9.results()[1], "BHD/2") @@ -457,7 +457,7 @@ model.do() Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, False) Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchLine_41 = Sketch_7.addLine(-41, 0, -41, 8) -SketchPoint_4 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_5/Edge-SketchCircle_5_2__cc")) +SketchPoint_4 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_5/SketchCircle_5_2__cc")) SketchConstraintCoincidence_64 = Sketch_7.setCoincident(SketchLine_41.startPoint(), SketchPoint_4.result()) SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_34") SketchLine_42 = Sketch_7.addLine(-41, 8, -34, 8) @@ -538,7 +538,7 @@ SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_47") SketchConstraintRadius_13 = Sketch_7.setRadius(SketchArc_7.results()[1], "BHPFR") SketchConstraintRadius_13.setName("SketchConstraintRadius_8") model.do() -RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "Sketch_7/Edge-SketchLine_41"), 360, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "Sketch_7/SketchLine_41"), 360, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchLine_49 = Sketch_8.addLine(32, 6, 32.50001476412091, 6.000000000000001) SketchLine_49.setName("SketchLine_55") @@ -546,7 +546,7 @@ SketchLine_49.result().setName("SketchLine_55") SketchLine_50 = Sketch_8.addLine(32, 0, 41, 0) SketchLine_50.setName("SketchLine_49") SketchLine_50.result().setName("SketchLine_49") -SketchPoint_5 = Sketch_8.addPoint(model.selection("VERTEX", "Sketch_6/Edge-SketchCircle_10_2__cc")) +SketchPoint_5 = Sketch_8.addPoint(model.selection("VERTEX", "Sketch_6/SketchCircle_10_2__cc")) SketchConstraintCoincidence_78 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchPoint_5.result()) SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_50") SketchLine_51 = Sketch_8.addLine(41, 0, 41, 8) @@ -634,7 +634,7 @@ SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_66") SketchConstraintRadius_14 = Sketch_8.setRadius(SketchArc_8.results()[1], 1.5) SketchConstraintRadius_14.setName("SketchConstraintRadius_9") model.do() -RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_55r-SketchLine_49f-SketchLine_50f-SketchLine_56r-SketchLine_52f-SketchLine_53f-SketchArc_7_2r")], model.selection("EDGE", "Sketch_8/Edge-SketchLine_50"), 360, 0, [model.selection("SOLID", "RevolutionFuse_1_1")]) +RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_52f-SketchLine_49f-SketchLine_50f-SketchLine_53f-SketchLine_56r-SketchArc_7_2r-SketchLine_55r")], model.selection("EDGE", "Sketch_8/SketchLine_50"), 360, 0, [model.selection("SOLID", "RevolutionFuse_1_1")]) Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, True) Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2")) SketchLine_57 = Sketch_9.addLine(-32.50001494742042, 5.999999999999998, -32, 6) @@ -643,7 +643,7 @@ SketchLine_57.result().setName("SketchLine_63") SketchLine_58 = Sketch_9.addLine(-32, 0, -41, 0) SketchLine_58.setName("SketchLine_57") SketchLine_58.result().setName("SketchLine_57") -SketchPoint_8 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_6/Edge-SketchCircle_11_2__cc")) +SketchPoint_8 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_6/SketchCircle_11_2__cc")) SketchConstraintCoincidence_95 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchPoint_8.result()) SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_67") SketchLine_59 = Sketch_9.addLine(-41, 0, -41, 7.999999999999999) @@ -738,7 +738,7 @@ SketchLine_65.result().setName("SketchLine_71") SketchLine_66 = Sketch_10.addLine(32, 0, 41, 0) SketchLine_66.setName("SketchLine_65") SketchLine_66.result().setName("SketchLine_65") -SketchPoint_11 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_6/Edge-SketchCircle_12_2__cc")) +SketchPoint_11 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_6/SketchCircle_12_2__cc")) SketchConstraintCoincidence_112 = Sketch_10.setCoincident(SketchLine_66.endPoint(), SketchPoint_11.result()) SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_84") SketchLine_67 = Sketch_10.addLine(41, 0, 41, 7.999999999999999) @@ -826,9 +826,9 @@ SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_100") SketchConstraintRadius_16 = Sketch_10.setRadius(SketchArc_10.results()[1], 1.5) SketchConstraintRadius_16.setName("SketchConstraintRadius_11") model.do() -RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_58"), 360, 0, [model.selection("SOLID", "RevolutionFuse_2_1")]) -RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_10")], model.selection("EDGE", "Sketch_10/Edge-SketchLine_66"), 360, 0, [model.selection("SOLID", "RevolutionFuse_3_1")]) -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchCircle_10_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_12_2f")], model.selection("EDGE", "PartSet/OZ"), "BPS+5", 5, [model.selection("SOLID", "RevolutionFuse_4_1")]) +RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/SketchLine_58"), 360, 0, [model.selection("SOLID", "RevolutionFuse_2_1")]) +RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_10")], model.selection("EDGE", "Sketch_10/SketchLine_66"), 360, 0, [model.selection("SOLID", "RevolutionFuse_3_1")]) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_9_2r"), model.selection("WIRE", "Sketch_6/Face-SketchCircle_10_2f_wire"), model.selection("FACE", "Sketch_6/Face-SketchCircle_12_2f")], model.selection("EDGE", "PartSet/OZ"), "BPS+5", 5, [model.selection("SOLID", "RevolutionFuse_4_1")]) # Test reexecution after parameter change Parameter_BPS.setValue(3) diff --git a/test.models/bushing.py b/test.models/bushing.py index c3f15e14d..ed2831085 100644 --- a/test.models/bushing.py +++ b/test.models/bushing.py @@ -582,9 +582,9 @@ SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_55") SketchLine_379 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY")) SketchConstraintDistance_13 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_379.result(), 15) model.do() -Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_8f-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f")], model.selection("EDGE", "PartSet/OX"), 360, 0) -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_1_2r-SketchLine_382f-SketchLine_383f-SketchLine_20f-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f-SketchLine_30f-SketchLine_31f-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f-SketchLine_36f-SketchLine_37f-SketchLine_38f-SketchLine_39f-SketchLine_40f-SketchLine_41f-SketchLine_42f-SketchLine_43f-SketchLine_44f-SketchLine_45f-SketchLine_46f-SketchLine_47f-SketchLine_48f-SketchLine_49f-SketchLine_50f-SketchLine_51f-SketchLine_52f-SketchLine_53f-SketchLine_54f-SketchLine_55f-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchLine_59f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchLine_65f-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_69f-SketchLine_70f-SketchLine_71f-SketchLine_72f-SketchLine_73f-SketchLine_74f-SketchLine_75f-SketchLine_76f-SketchLine_77f-SketchLine_78f-SketchLine_79f-SketchLine_80f-SketchLine_81f-SketchLine_82f-SketchLine_83f-SketchLine_84f-SketchLine_85f-SketchLine_86f-SketchLine_87f-SketchLine_88f-SketchLine_89f-SketchLine_90f-SketchLine_91f-SketchLine_92f-SketchLine_93f-SketchLine_94f-SketchLine_95f-SketchLine_96f-SketchLine_97f-SketchLine_98f-SketchLine_99f-SketchLine_100f-SketchLine_101f-SketchLine_102f-SketchLine_103f-SketchLine_104f-SketchLine_105f-SketchLine_106f-SketchLine_107f-SketchLine_108f-SketchLine_109f-SketchLine_110f-SketchLine_111f-SketchLine_112f-SketchLine_113f-SketchLine_114f-SketchLine_115f-SketchLine_116f-SketchLine_117f-SketchLine_118f-SketchLine_119f-SketchLine_120f-SketchLine_121f-SketchLine_122f-SketchLine_123f-SketchLine_124f-SketchLine_125f-SketchLine_126f-SketchLine_127f-SketchLine_128f-SketchLine_129f-SketchLine_130f-SketchLine_131f-SketchLine_132f-SketchLine_133f-SketchLine_134f-SketchLine_135f-SketchLine_136f-SketchLine_137f-SketchLine_138f-SketchLine_139f-SketchLine_140f-SketchLine_141f-SketchLine_142f-SketchLine_143f-SketchLine_144f-SketchLine_145f-SketchLine_146f-SketchLine_147f-SketchLine_148f-SketchLine_149f-SketchLine_150f-SketchLine_151f-SketchLine_152f-SketchLine_153f-SketchLine_154f-SketchLine_155f-SketchLine_156f-SketchLine_157f-SketchLine_158f-SketchLine_159f-SketchLine_160f-SketchLine_161f-SketchLine_162f-SketchLine_163f-SketchLine_164f-SketchLine_165f-SketchLine_166f-SketchLine_167f-SketchLine_168f-SketchLine_169f-SketchLine_170f-SketchLine_171f-SketchLine_172f-SketchLine_173f-SketchLine_174f-SketchLine_175f-SketchLine_176f-SketchLine_177f-SketchLine_178f-SketchLine_179f-SketchLine_180f-SketchLine_181f-SketchLine_182f-SketchLine_183f-SketchLine_184f-SketchLine_185f-SketchLine_186f-SketchLine_187f-SketchLine_188f-SketchLine_189f-SketchLine_190f-SketchLine_191f-SketchLine_192f-SketchLine_193f-SketchLine_194f-SketchLine_195f-SketchLine_196f-SketchLine_197f-SketchLine_198f-SketchLine_199f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2r-SketchArc_5_2r-SketchArc_6_2r-SketchArc_7_2r-SketchArc_8_2r-SketchArc_9_2r-SketchArc_10_2r-SketchArc_11_2r-SketchArc_12_2r-SketchArc_13_2r-SketchArc_14_2r-SketchArc_15_2r-SketchArc_16_2r-SketchArc_17_2r-SketchArc_18_2r-SketchArc_19_2r-SketchArc_20_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_23_2r-SketchArc_24_2r-SketchArc_25_2r-SketchArc_26_2r-SketchArc_27_2r-SketchArc_28_2r-SketchArc_29_2r-SketchArc_30_2r-SketchArc_31_2r-SketchArc_32_2r-SketchArc_33_2r-SketchArc_34_2r-SketchArc_35_2r-SketchArc_36_2r-SketchArc_37_2r-SketchArc_38_2r-SketchArc_39_2r-SketchArc_40_2r-SketchArc_41_2r-SketchArc_42_2r-SketchArc_43_2r-SketchArc_44_2r-SketchArc_45_2r-SketchArc_46_2r-SketchArc_47_2r-SketchArc_48_2r-SketchArc_49_2r-SketchArc_50_2r-SketchArc_51_2r-SketchArc_52_2r-SketchArc_53_2r-SketchArc_54_2r-SketchArc_55_2r-SketchArc_56_2r-SketchArc_57_2r-SketchArc_58_2r-SketchArc_59_2r-SketchArc_60_2r-SketchArc_61_2r-SketchArc_62_2r-SketchArc_63_2r-SketchArc_64_2r-SketchArc_65_2r-SketchArc_66_2r-SketchArc_67_2r-SketchArc_68_2r-SketchArc_69_2r-SketchArc_70_2r-SketchArc_71_2r-SketchArc_72_2r-SketchArc_73_2r-SketchArc_74_2r-SketchArc_75_2r-SketchArc_76_2r-SketchArc_77_2r-SketchArc_78_2r-SketchArc_79_2r-SketchArc_80_2r-SketchArc_81_2r-SketchArc_82_2r-SketchArc_83_2r-SketchArc_84_2r-SketchArc_85_2r-SketchArc_86_2r-SketchArc_87_2r-SketchArc_88_2r-SketchArc_89_2r-SketchArc_90_2r-SketchArc_91_2r-SketchArc_92_2r-SketchArc_93_2r-SketchArc_94_2r-SketchArc_95_2r-SketchArc_96_2r-SketchArc_97_2r-SketchArc_98_2r-SketchArc_99_2r-SketchArc_100_2r-SketchArc_101_2r-SketchArc_102_2r-SketchArc_103_2r-SketchArc_104_2r-SketchArc_105_2r-SketchArc_106_2r-SketchArc_107_2r-SketchArc_108_2r-SketchArc_109_2r-SketchArc_110_2r-SketchArc_111_2r-SketchArc_112_2r-SketchArc_113_2r-SketchArc_114_2r-SketchArc_115_2r-SketchArc_116_2r-SketchArc_117_2r-SketchArc_118_2r-SketchArc_119_2r-SketchArc_120_2r-SketchArc_121_2r-SketchArc_122_2r-SketchArc_123_2r-SketchArc_124_2r-SketchArc_125_2r-SketchArc_126_2r-SketchArc_127_2r-SketchArc_128_2r-SketchArc_129_2r-SketchArc_130_2r-SketchArc_131_2r-SketchArc_132_2r-SketchArc_133_2r-SketchArc_134_2r-SketchArc_135_2r-SketchArc_136_2r-SketchArc_137_2r-SketchArc_138_2r-SketchArc_139_2r-SketchArc_140_2r-SketchArc_141_2r-SketchArc_142_2r-SketchArc_143_2r-SketchArc_144_2r-SketchArc_145_2r-SketchArc_146_2r-SketchArc_147_2r-SketchArc_148_2r-SketchArc_149_2r-SketchArc_150_2r-SketchArc_151_2r-SketchArc_152_2r-SketchArc_153_2r-SketchArc_154_2r-SketchArc_155_2r-SketchArc_156_2r-SketchArc_157_2r-SketchArc_158_2r-SketchArc_159_2r-SketchArc_160_2r-SketchArc_161_2r-SketchArc_162_2r-SketchArc_163_2r-SketchArc_164_2r-SketchArc_165_2r-SketchArc_166_2r-SketchArc_167_2r-SketchArc_168_2r-SketchArc_169_2r-SketchArc_170_2r-SketchArc_171_2r-SketchArc_172_2r-SketchArc_173_2r-SketchArc_174_2r-SketchArc_175_2r-SketchArc_176_2r-SketchArc_177_2r-SketchArc_178_2r-SketchArc_179_2r-SketchArc_180_2r-SketchLine_21f-SketchLine_200f-SketchLine_201f-SketchLine_202f-SketchLine_203f-SketchLine_204f-SketchLine_205f-SketchLine_206f-SketchLine_207f-SketchLine_208f-SketchLine_209f-SketchLine_210f-SketchLine_211f-SketchLine_212f-SketchLine_213f-SketchLine_214f-SketchLine_215f-SketchLine_216f-SketchLine_217f-SketchLine_218f-SketchLine_219f-SketchLine_220f-SketchLine_221f-SketchLine_222f-SketchLine_223f-SketchLine_224f-SketchLine_225f-SketchLine_226f-SketchLine_227f-SketchLine_228f-SketchLine_229f-SketchLine_230f-SketchLine_231f-SketchLine_232f-SketchLine_233f-SketchLine_234f-SketchLine_235f-SketchLine_236f-SketchLine_237f-SketchLine_238f-SketchLine_239f-SketchLine_240f-SketchLine_241f-SketchLine_242f-SketchLine_243f-SketchLine_244f-SketchLine_245f-SketchLine_246f-SketchLine_247f-SketchLine_248f-SketchLine_249f-SketchLine_250f-SketchLine_251f-SketchLine_252f-SketchLine_253f-SketchLine_254f-SketchLine_255f-SketchLine_256f-SketchLine_257f-SketchLine_258f-SketchLine_259f-SketchLine_260f-SketchLine_261f-SketchLine_262f-SketchLine_263f-SketchLine_264f-SketchLine_265f-SketchLine_266f-SketchLine_267f-SketchLine_268f-SketchLine_269f-SketchLine_270f-SketchLine_271f-SketchLine_272f-SketchLine_273f-SketchLine_274f-SketchLine_275f-SketchLine_276f-SketchLine_277f-SketchLine_278f-SketchLine_279f-SketchLine_280f-SketchLine_281f-SketchLine_282f-SketchLine_283f-SketchLine_284f-SketchLine_285f-SketchLine_286f-SketchLine_287f-SketchLine_288f-SketchLine_289f-SketchLine_290f-SketchLine_291f-SketchLine_292f-SketchLine_293f-SketchLine_294f-SketchLine_295f-SketchLine_296f-SketchLine_297f-SketchLine_298f-SketchLine_299f-SketchLine_300f-SketchLine_301f-SketchLine_302f-SketchLine_303f-SketchLine_304f-SketchLine_305f-SketchLine_306f-SketchLine_307f-SketchLine_308f-SketchLine_309f-SketchLine_310f-SketchLine_311f-SketchLine_312f-SketchLine_313f-SketchLine_314f-SketchLine_315f-SketchLine_316f-SketchLine_317f-SketchLine_318f-SketchLine_319f-SketchLine_320f-SketchLine_321f-SketchLine_322f-SketchLine_323f-SketchLine_324f-SketchLine_325f-SketchLine_326f-SketchLine_327f-SketchLine_328f-SketchLine_329f-SketchLine_330f-SketchLine_331f-SketchLine_332f-SketchLine_333f-SketchLine_334f-SketchLine_335f-SketchLine_336f-SketchLine_337f-SketchLine_338f-SketchLine_339f-SketchLine_340f-SketchLine_341f-SketchLine_342f-SketchLine_343f-SketchLine_344f-SketchLine_345f-SketchLine_346f-SketchLine_347f-SketchLine_348f-SketchLine_349f-SketchLine_350f-SketchLine_351f-SketchLine_352f-SketchLine_353f-SketchLine_354f-SketchLine_355f-SketchLine_356f-SketchLine_357f-SketchLine_358f-SketchLine_359f-SketchLine_360f-SketchLine_361f-SketchLine_362f-SketchLine_363f-SketchLine_364f-SketchLine_365f-SketchLine_366f-SketchLine_367f-SketchLine_368f-SketchLine_369f-SketchLine_370f-SketchLine_371f-SketchLine_372f-SketchLine_373f-SketchLine_374f-SketchLine_375f-SketchLine_376f-SketchLine_377f-SketchCircle_3_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) -ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_4_2f")], model.selection(), 30, 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_12f-SketchLine_13f-SketchLine_14f-SketchLine_8f-SketchLine_9f-SketchLine_11f")], model.selection("EDGE", "PartSet/OX"), 360, 0) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f-SketchLine_383f-SketchLine_199f-SketchArc_180_2r-SketchLine_377f-SketchLine_198f-SketchArc_179_2r-SketchLine_376f-SketchLine_197f-SketchArc_178_2r-SketchLine_375f-SketchLine_196f-SketchArc_177_2r-SketchLine_374f-SketchLine_195f-SketchArc_176_2r-SketchLine_373f-SketchLine_194f-SketchArc_175_2r-SketchLine_372f-SketchLine_193f-SketchArc_174_2r-SketchLine_371f-SketchLine_192f-SketchArc_173_2r-SketchLine_370f-SketchLine_191f-SketchArc_172_2r-SketchLine_369f-SketchLine_190f-SketchArc_171_2r-SketchLine_368f-SketchLine_189f-SketchArc_170_2r-SketchLine_367f-SketchLine_188f-SketchArc_169_2r-SketchLine_366f-SketchLine_187f-SketchArc_168_2r-SketchLine_365f-SketchLine_186f-SketchArc_167_2r-SketchLine_364f-SketchLine_185f-SketchArc_166_2r-SketchLine_363f-SketchLine_184f-SketchArc_165_2r-SketchLine_362f-SketchLine_183f-SketchArc_164_2r-SketchLine_361f-SketchLine_182f-SketchArc_163_2r-SketchLine_360f-SketchLine_181f-SketchArc_162_2r-SketchLine_359f-SketchLine_180f-SketchArc_161_2r-SketchLine_358f-SketchLine_179f-SketchArc_160_2r-SketchLine_357f-SketchLine_178f-SketchArc_159_2r-SketchLine_356f-SketchLine_177f-SketchArc_158_2r-SketchLine_355f-SketchLine_176f-SketchArc_157_2r-SketchLine_354f-SketchLine_175f-SketchArc_156_2r-SketchLine_353f-SketchLine_174f-SketchArc_155_2r-SketchLine_352f-SketchLine_173f-SketchArc_154_2r-SketchLine_351f-SketchLine_172f-SketchArc_153_2r-SketchLine_350f-SketchLine_171f-SketchArc_152_2r-SketchLine_349f-SketchLine_170f-SketchArc_151_2r-SketchLine_348f-SketchLine_169f-SketchArc_150_2r-SketchLine_347f-SketchLine_168f-SketchArc_149_2r-SketchLine_346f-SketchLine_167f-SketchArc_148_2r-SketchLine_345f-SketchLine_166f-SketchArc_147_2r-SketchLine_344f-SketchLine_165f-SketchArc_146_2r-SketchLine_343f-SketchLine_164f-SketchArc_145_2r-SketchLine_342f-SketchLine_163f-SketchArc_144_2r-SketchLine_341f-SketchLine_162f-SketchArc_143_2r-SketchLine_340f-SketchLine_161f-SketchArc_142_2r-SketchLine_339f-SketchLine_160f-SketchArc_141_2r-SketchLine_338f-SketchLine_159f-SketchArc_140_2r-SketchLine_337f-SketchLine_158f-SketchArc_139_2r-SketchLine_336f-SketchLine_157f-SketchArc_138_2r-SketchLine_335f-SketchLine_156f-SketchArc_137_2r-SketchLine_334f-SketchLine_155f-SketchArc_136_2r-SketchLine_333f-SketchLine_154f-SketchArc_135_2r-SketchLine_332f-SketchLine_153f-SketchArc_134_2r-SketchLine_331f-SketchLine_152f-SketchArc_133_2r-SketchLine_330f-SketchLine_151f-SketchArc_132_2r-SketchLine_329f-SketchLine_150f-SketchArc_131_2r-SketchLine_328f-SketchLine_149f-SketchArc_130_2r-SketchLine_327f-SketchLine_148f-SketchArc_129_2r-SketchLine_326f-SketchLine_147f-SketchArc_128_2r-SketchLine_325f-SketchLine_146f-SketchArc_127_2r-SketchLine_324f-SketchLine_145f-SketchArc_126_2r-SketchLine_323f-SketchLine_144f-SketchArc_125_2r-SketchLine_322f-SketchLine_143f-SketchArc_124_2r-SketchLine_321f-SketchLine_142f-SketchArc_123_2r-SketchLine_320f-SketchLine_141f-SketchArc_122_2r-SketchLine_319f-SketchLine_140f-SketchArc_121_2r-SketchLine_318f-SketchLine_139f-SketchArc_120_2r-SketchLine_317f-SketchLine_138f-SketchArc_119_2r-SketchLine_316f-SketchLine_137f-SketchArc_118_2r-SketchLine_315f-SketchLine_136f-SketchArc_117_2r-SketchLine_314f-SketchLine_135f-SketchArc_116_2r-SketchLine_313f-SketchLine_134f-SketchArc_115_2r-SketchLine_312f-SketchLine_133f-SketchArc_114_2r-SketchLine_311f-SketchLine_132f-SketchArc_113_2r-SketchLine_310f-SketchLine_131f-SketchArc_112_2r-SketchLine_309f-SketchLine_130f-SketchArc_111_2r-SketchLine_308f-SketchLine_129f-SketchArc_110_2r-SketchLine_307f-SketchLine_128f-SketchArc_109_2r-SketchLine_306f-SketchLine_127f-SketchArc_108_2r-SketchLine_305f-SketchLine_126f-SketchArc_107_2r-SketchLine_304f-SketchLine_125f-SketchArc_106_2r-SketchLine_303f-SketchLine_124f-SketchArc_105_2r-SketchLine_302f-SketchLine_123f-SketchArc_104_2r-SketchLine_301f-SketchLine_122f-SketchArc_103_2r-SketchLine_300f-SketchLine_121f-SketchArc_102_2r-SketchLine_299f-SketchLine_120f-SketchArc_101_2r-SketchLine_298f-SketchLine_119f-SketchArc_100_2r-SketchLine_297f-SketchLine_118f-SketchArc_99_2r-SketchLine_296f-SketchLine_117f-SketchArc_98_2r-SketchLine_295f-SketchLine_116f-SketchArc_97_2r-SketchLine_294f-SketchLine_115f-SketchArc_96_2r-SketchLine_293f-SketchLine_114f-SketchArc_95_2r-SketchLine_292f-SketchLine_113f-SketchArc_94_2r-SketchLine_291f-SketchLine_112f-SketchArc_93_2r-SketchLine_290f-SketchLine_111f-SketchArc_92_2r-SketchLine_289f-SketchLine_110f-SketchArc_91_2r-SketchLine_288f-SketchLine_109f-SketchArc_90_2r-SketchLine_287f-SketchLine_108f-SketchArc_89_2r-SketchLine_286f-SketchLine_107f-SketchArc_88_2r-SketchLine_285f-SketchLine_106f-SketchArc_87_2r-SketchLine_284f-SketchLine_105f-SketchArc_86_2r-SketchLine_283f-SketchLine_104f-SketchArc_85_2r-SketchLine_282f-SketchLine_103f-SketchArc_84_2r-SketchLine_281f-SketchLine_102f-SketchArc_83_2r-SketchLine_280f-SketchLine_101f-SketchArc_82_2r-SketchLine_279f-SketchLine_100f-SketchArc_81_2r-SketchLine_278f-SketchLine_99f-SketchArc_80_2r-SketchLine_277f-SketchLine_98f-SketchArc_79_2r-SketchLine_276f-SketchLine_97f-SketchArc_78_2r-SketchLine_275f-SketchLine_96f-SketchArc_77_2r-SketchLine_274f-SketchLine_95f-SketchArc_76_2r-SketchLine_273f-SketchLine_94f-SketchArc_75_2r-SketchLine_272f-SketchLine_93f-SketchArc_74_2r-SketchLine_271f-SketchLine_92f-SketchArc_73_2r-SketchLine_270f-SketchLine_91f-SketchArc_72_2r-SketchLine_269f-SketchLine_90f-SketchArc_71_2r-SketchLine_268f-SketchLine_89f-SketchArc_70_2r-SketchLine_267f-SketchLine_88f-SketchArc_69_2r-SketchLine_266f-SketchLine_87f-SketchArc_68_2r-SketchLine_265f-SketchLine_86f-SketchArc_67_2r-SketchLine_264f-SketchLine_85f-SketchArc_66_2r-SketchLine_263f-SketchLine_84f-SketchArc_65_2r-SketchLine_262f-SketchLine_83f-SketchArc_64_2r-SketchLine_261f-SketchLine_82f-SketchArc_63_2r-SketchLine_260f-SketchLine_81f-SketchArc_62_2r-SketchLine_259f-SketchLine_80f-SketchArc_61_2r-SketchLine_258f-SketchLine_79f-SketchArc_60_2r-SketchLine_257f-SketchLine_78f-SketchArc_59_2r-SketchLine_256f-SketchLine_77f-SketchArc_58_2r-SketchLine_255f-SketchLine_76f-SketchArc_57_2r-SketchLine_254f-SketchLine_75f-SketchArc_56_2r-SketchLine_253f-SketchLine_74f-SketchArc_55_2r-SketchLine_252f-SketchLine_73f-SketchArc_54_2r-SketchLine_251f-SketchLine_72f-SketchArc_53_2r-SketchLine_250f-SketchLine_71f-SketchArc_52_2r-SketchLine_249f-SketchLine_70f-SketchArc_51_2r-SketchLine_248f-SketchLine_69f-SketchArc_50_2r-SketchLine_247f-SketchLine_68f-SketchArc_49_2r-SketchLine_246f-SketchLine_67f-SketchArc_48_2r-SketchLine_245f-SketchLine_66f-SketchArc_47_2r-SketchLine_244f-SketchLine_65f-SketchArc_46_2r-SketchLine_243f-SketchLine_64f-SketchArc_45_2r-SketchLine_242f-SketchLine_63f-SketchArc_44_2r-SketchLine_241f-SketchLine_62f-SketchArc_43_2r-SketchLine_240f-SketchLine_61f-SketchArc_42_2r-SketchLine_239f-SketchLine_60f-SketchArc_41_2r-SketchLine_238f-SketchLine_59f-SketchArc_40_2r-SketchLine_237f-SketchLine_58f-SketchArc_39_2r-SketchLine_236f-SketchLine_57f-SketchArc_38_2r-SketchLine_235f-SketchLine_56f-SketchArc_37_2r-SketchLine_234f-SketchLine_55f-SketchArc_36_2r-SketchLine_233f-SketchLine_54f-SketchArc_35_2r-SketchLine_232f-SketchLine_53f-SketchArc_34_2r-SketchLine_231f-SketchLine_52f-SketchArc_33_2r-SketchLine_230f-SketchLine_51f-SketchArc_32_2r-SketchLine_229f-SketchLine_50f-SketchArc_31_2r-SketchLine_228f-SketchLine_49f-SketchArc_30_2r-SketchLine_227f-SketchLine_48f-SketchArc_29_2r-SketchLine_226f-SketchLine_47f-SketchArc_28_2r-SketchLine_225f-SketchLine_46f-SketchArc_27_2r-SketchLine_224f-SketchLine_45f-SketchArc_26_2r-SketchLine_223f-SketchLine_44f-SketchArc_25_2r-SketchLine_222f-SketchLine_43f-SketchArc_24_2r-SketchLine_221f-SketchLine_42f-SketchArc_23_2r-SketchLine_220f-SketchLine_41f-SketchArc_22_2r-SketchLine_219f-SketchLine_40f-SketchArc_21_2r-SketchLine_218f-SketchLine_39f-SketchArc_20_2r-SketchLine_217f-SketchLine_38f-SketchArc_19_2r-SketchLine_216f-SketchLine_37f-SketchArc_18_2r-SketchLine_215f-SketchLine_36f-SketchArc_17_2r-SketchLine_214f-SketchLine_35f-SketchArc_16_2r-SketchLine_213f-SketchLine_34f-SketchArc_15_2r-SketchLine_212f-SketchLine_33f-SketchArc_14_2r-SketchLine_211f-SketchLine_32f-SketchArc_13_2r-SketchLine_210f-SketchLine_31f-SketchArc_12_2r-SketchLine_209f-SketchLine_30f-SketchArc_11_2r-SketchLine_208f-SketchLine_29f-SketchArc_10_2r-SketchLine_207f-SketchLine_28f-SketchArc_9_2r-SketchLine_206f-SketchLine_27f-SketchArc_8_2r-SketchLine_205f-SketchLine_26f-SketchArc_7_2r-SketchLine_204f-SketchLine_25f-SketchArc_6_2r-SketchLine_203f-SketchLine_24f-SketchArc_5_2r-SketchLine_202f-SketchLine_23f-SketchArc_4_2r-SketchLine_201f-SketchLine_22f-SketchArc_3_2r-SketchLine_200f-SketchLine_20f-SketchArc_2_2r-SketchLine_21f-SketchLine_382f-SketchArc_1_2r")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_13"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_4_2r")], model.selection(), 30, 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) # Test reexecution after parameter change Parameter_H.setValue(14) diff --git a/test.models/case24.py b/test.models/case24.py index 5db96a7f2..6dca168c2 100644 --- a/test.models/case24.py +++ b/test.models/case24.py @@ -30,7 +30,7 @@ Parameter_R = model.addParameter(Part_1_doc, "R", "3") model.addParameter(Part_1_doc, "DBody", "65") Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 89, False) Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) -SketchLine_1 = Sketch_1.addLine(0, 20, 16.99998550401508, 20) +SketchLine_1 = Sketch_1.addLine(0, 20, 17, 20) SketchLine_1.setName("SketchLine_7") SketchLine_1.result().setName("SketchLine_7") SketchLine_2 = Sketch_1.addLine(20, 0, 0, 0) @@ -39,7 +39,7 @@ SketchLine_2.result().setName("SketchLine_1") SketchLine_3 = Sketch_1.addLine(0, 0, 0, 20) SketchLine_3.setName("SketchLine_2") SketchLine_3.result().setName("SketchLine_2") -SketchLine_4 = Sketch_1.addLine(20, 16.99999846116062, 20, 0) +SketchLine_4 = Sketch_1.addLine(20, 17, 20, 0) SketchLine_4.setName("SketchLine_8") SketchLine_4.result().setName("SketchLine_8") SketchLine_5 = Sketch_1.addLine(20, 20, 20, 0) @@ -66,7 +66,7 @@ SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY" SketchLine_8 = SketchProjection_2.createdFeature() SketchLine_8.setName("SketchLine_6") SketchLine_8.result().setName("SketchLine_6") -SketchArc_1 = Sketch_1.addArc(17, 17, 20, 16.99999846116062, 16.99998550401508, 20, False) +SketchArc_1 = Sketch_1.addArc(17, 17, 20, 17, 17, 20, False) SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_4.startPoint()) SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.endPoint()) SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_1.result()) @@ -80,21 +80,21 @@ SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_3.startPoint( SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_3.result(), 20) SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_2.result(), 20) model.do() -Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_7r-SketchLine_1r-SketchLine_2r-SketchLine_8r-SketchArc_1_2f")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), 0, 180) -ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_7r-SketchLine_1r-SketchLine_2r-SketchLine_8r-SketchArc_1_2f")], model.selection(), 0, 25, [model.selection("SOLID", "Revolution_1_1")]) +Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_2r-SketchLine_1r-SketchLine_8r-SketchArc_1_2f-SketchLine_7r")], model.selection("EDGE", "Sketch_1/SketchLine_2"), 0, 180) +ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_2r-SketchLine_1r-SketchLine_8r-SketchArc_1_2f-SketchLine_7r")], model.selection(), 0, 25, [model.selection("SOLID", "Revolution_1_1")]) Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) -SketchLine_9 = Sketch_2.addLine(0, 20, -17.00000285538278, 20) +SketchLine_9 = Sketch_2.addLine(0, 20, -17, 20) SketchLine_9.setName("SketchLine_13") SketchLine_9.result().setName("SketchLine_13") SketchLine_10 = Sketch_2.addLine(-20, 0, 0, 0) SketchLine_10.setName("SketchLine_9") SketchLine_10.result().setName("SketchLine_9") -SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_2s-SketchProjection_1s-SketchLine_5s-SketchProjection_2s-SketchLine_6s-SketchLine_1e")) +SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex")) SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchPoint_1.result()) SketchLine_11 = Sketch_2.addLine(0, 0, 0, 20) SketchLine_11.setName("SketchLine_10") SketchLine_11.result().setName("SketchLine_10") -SketchLine_12 = Sketch_2.addLine(-20, 17.00000633266883, -20, 0) +SketchLine_12 = Sketch_2.addLine(-20, 17, -20, 0) SketchLine_12.setName("SketchLine_14") SketchLine_12.result().setName("SketchLine_14") SketchLine_13 = Sketch_2.addLine(-20, 20, -20, 0) @@ -113,7 +113,7 @@ SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_10.result()) SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_11.result()) SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_14.result()) SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_13.result()) -SketchArc_2 = Sketch_2.addArc(-17, 17, -17.00000285538278, 20, -20, 17.00000633266883, False) +SketchArc_2 = Sketch_2.addArc(-17, 17, -17, 20, -20, 17, False) SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchArc_2.startPoint(), SketchLine_9.endPoint()) SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_12.startPoint()) SketchConstraintTangent_3 = Sketch_2.setTangent(SketchArc_2.results()[1], SketchLine_9.result()) @@ -126,20 +126,20 @@ SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], 3) SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_10.startPoint(), SketchLine_11.result(), 20) SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_11.endPoint(), SketchLine_10.result(), 20) model.do() -ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13f-SketchLine_9f-SketchLine_10f-SketchLine_14f-SketchArc_2_2f")], model.selection(), 0, 25, [model.selection("SOLID", "ExtrusionFuse_1_1")]) -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_8")) +ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13r-SketchArc_2_2f-SketchLine_14f-SketchLine_9f-SketchLine_10f")], model.selection(), 0, 25, [model.selection("SOLID", "ExtrusionFuse_1_1")]) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "(ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchLine_9)(ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchLine_14)(ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchArc_2_2)(ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchLine_13)")) SketchLine_15 = Sketch_3.addLine(0, -20, -17.00000002635728, -20) SketchLine_15.setName("SketchLine_19") SketchLine_15.result().setName("SketchLine_19") SketchLine_16 = Sketch_3.addLine(-20, 0, 0, 0) SketchLine_16.setName("SketchLine_15") SketchLine_16.result().setName("SketchLine_15") -SketchPoint_2 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_9&ExtrusionFuse_2_1/Modfied_5&ExtrusionFuse_2_1/Modfied_8&ExtrusionFuse_2_1/Modfied_2")) +SketchPoint_2 = Sketch_3.addPoint(model.selection("VERTEX", "[ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchLine_9][(ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchLine_9)(ExtrusionFuse_1_1/Generated_Face&Sketch_1/SketchLine_8)][(ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchLine_9)(ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchLine_14)(ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchArc_2_2)(ExtrusionFuse_2_1/Generated_Face&Sketch_2/SketchLine_13)][(ExtrusionFuse_1_1/Generated_Face&Sketch_1/SketchLine_8)(ExtrusionFuse_1_1/Generated_Face&Sketch_1/SketchArc_1_2)]")) SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchPoint_2.result()) SketchLine_17 = Sketch_3.addLine(0, 0, 0, -20) SketchLine_17.setName("SketchLine_16") SketchLine_17.result().setName("SketchLine_16") -SketchLine_18 = Sketch_3.addLine(-20, -16.99998301947517, -20, 0) +SketchLine_18 = Sketch_3.addLine(-20, -17, -20, 0) SketchLine_18.setName("SketchLine_20") SketchLine_18.result().setName("SketchLine_20") SketchLine_19 = Sketch_3.addLine(-20, -20, -20, 0) @@ -158,7 +158,7 @@ SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_16.result()) SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_17.result()) SketchConstraintHorizontal_6 = Sketch_3.setHorizontal(SketchLine_20.result()) SketchConstraintVertical_6 = Sketch_3.setVertical(SketchLine_19.result()) -SketchArc_3 = Sketch_3.addArc(-17, -17, -20, -16.99998301947517, -17.00000002635728, -20, False) +SketchArc_3 = Sketch_3.addArc(-17, -17, -20, -17, -17.00000002635728, -20, False) SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchArc_3.startPoint(), SketchLine_18.startPoint()) SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchLine_15.endPoint()) SketchConstraintTangent_5 = Sketch_3.setTangent(SketchArc_3.results()[1], SketchLine_15.result()) @@ -174,9 +174,9 @@ SketchLine_21 = Sketch_3.addLine(-23, -0.01462093666115485, -23, -19.98755081419 SketchConstraintParallel_1 = Sketch_3.setParallel(SketchLine_17.result(), SketchLine_21.result()) SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_21.startPoint(), SketchLine_18.result(), 3) model.do() -RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "Sketch_3/Edge-SketchLine_21"), 71, 0, [model.selection("SOLID", "ExtrusionFuse_2_1")]) -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_4")) -SketchLine_22 = Sketch_4.addLine(-3, -20, 17.00000452949485, -20) +RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "Sketch_3/SketchLine_21"), 71, 0, [model.selection("SOLID", "ExtrusionFuse_2_1")]) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modified_Face&weak_name_1")) +SketchLine_22 = Sketch_4.addLine(-3, -20, 17, -20) SketchLine_22.setName("SketchLine_26") SketchLine_22.result().setName("SketchLine_26") SketchLine_23 = Sketch_4.addLine(20, 0, -3, 0) @@ -185,7 +185,7 @@ SketchLine_23.result().setName("SketchLine_22") SketchLine_24 = Sketch_4.addLine(-3, 0, -3, -20) SketchLine_24.setName("SketchLine_23") SketchLine_24.result().setName("SketchLine_23") -SketchLine_25 = Sketch_4.addLine(20, -17.00001580618423, 20, 0) +SketchLine_25 = Sketch_4.addLine(20, -17, 20, 0) SketchLine_25.setName("SketchLine_27") SketchLine_25.result().setName("SketchLine_27") SketchLine_26 = Sketch_4.addLine(20, -20, 20, 0) @@ -204,7 +204,7 @@ SketchConstraintHorizontal_7 = Sketch_4.setHorizontal(SketchLine_23.result()) SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_24.result()) SketchConstraintHorizontal_8 = Sketch_4.setHorizontal(SketchLine_27.result()) SketchConstraintVertical_8 = Sketch_4.setVertical(SketchLine_26.result()) -SketchArc_4 = Sketch_4.addArc(17, -17, 17.00000452949485, -20, 20, -17.00001580618423, False) +SketchArc_4 = Sketch_4.addArc(17, -17, 17, -20, 20, -17, False) SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchArc_4.startPoint(), SketchLine_22.endPoint()) SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchArc_4.endPoint(), SketchLine_25.startPoint()) SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_4.results()[1], SketchLine_22.result()) @@ -214,7 +214,7 @@ SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchLine_26.endPoint() SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_22.endPoint(), SketchLine_27.result()) SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_26.result()) SketchConstraintRadius_4 = Sketch_4.setRadius(SketchArc_4.results()[1], 3) -SketchLine_28 = Sketch_4.addLine(model.selection("EDGE", "Sketch_3/Edge-SketchLine_15")) +SketchLine_28 = Sketch_4.addLine(model.selection("EDGE", "Sketch_3/SketchLine_15")) SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_28.result()) SketchConstraintDistance_8 = Sketch_4.setDistance(SketchLine_22.endPoint(), SketchLine_23.result(), 20) SketchConstraintDistance_9 = Sketch_4.setDistance(SketchLine_28.endPoint(), SketchLine_25.result(), 20) @@ -223,12 +223,12 @@ SketchLine_29 = Sketch_4.addLine(23, -0.2448405100241045, 23, -19.61338093143246 SketchConstraintParallel_2 = Sketch_4.setParallel(SketchLine_25.result(), SketchLine_29.result()) SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 3) model.do() -RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_26f-SketchLine_22f-SketchLine_23f-SketchLine_27f-SketchArc_4_2f")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_29"), 0, 71, [model.selection("SOLID", "RevolutionFuse_1_1")]) +RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_26r-SketchArc_4_2f-SketchLine_27f-SketchLine_22f-SketchLine_23f")], model.selection("EDGE", "Sketch_4/SketchLine_29"), 0, 71, [model.selection("SOLID", "RevolutionFuse_1_1")]) Sketch_5 = model.addSketch(Part_1_doc, model.standardPlane("XOZ")) SketchLine_30 = Sketch_5.addLine(0, 0, 0, 82) SketchLine_31 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OZ")) SketchConstraintCoincidence_45 = Sketch_5.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result()) -SketchLine_32 = Sketch_5.addLine(27.41618692363446, 77.00000000000001, 58.99998109391454, 77.00000000000001) +SketchLine_32 = Sketch_5.addLine(27.41618692363446, 77, 58.99998109391454, 77) SketchLine_32.setName("SketchLine_39") SketchLine_32.result().setName("SketchLine_39") SketchLine_33 = Sketch_5.addLine(0, 82, 20, 82) @@ -238,7 +238,7 @@ SketchConstraintCoincidence_46 = Sketch_5.setCoincident(SketchLine_30.endPoint() SketchLine_34 = Sketch_5.addLine(65, 70.99999917134223, 65, 0) SketchLine_34.setName("SketchLine_40") SketchLine_34.result().setName("SketchLine_40") -SketchLine_35 = Sketch_5.addLine(27.41618692363446, 77.00000000000001, 65, 77.00000000000001) +SketchLine_35 = Sketch_5.addLine(27.41618692363446, 77, 65, 77) SketchLine_35.setName("SketchLine_34") SketchLine_35.result().setName("SketchLine_34") SketchLine_35.setAuxiliary(True) @@ -263,7 +263,7 @@ SketchConstraintDistance_12 = Sketch_5.setDistance(SketchLine_33.endPoint(), Ske SketchConstraintDistance_12.setName("SketchConstraintDistance_14") SketchConstraintDistance_13 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_37.result(), 82) SketchConstraintDistance_13.setName("SketchConstraintDistance_15") -SketchArc_5 = Sketch_5.addArc(59, 70.99999999999999, 65, 70.99999917134223, 58.99998109391454, 77.00000000000001, False) +SketchArc_5 = Sketch_5.addArc(59, 70.99999999999999, 65, 70.99999917134223, 58.99998109391454, 77, False) SketchArc_5.setName("SketchArc_6") SketchArc_5.result().setName("SketchArc_6") SketchArc_5.results()[1].setName("SketchArc_6_2") @@ -285,7 +285,7 @@ SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_34.startPoint SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_62") SketchConstraintRadius_5 = Sketch_5.setRadius(SketchArc_5.results()[1], 6) SketchConstraintRadius_5.setName("SketchConstraintRadius_6") -SketchArc_6 = Sketch_5.addArc(27.41619848709567, 84.99999999999999, 27.41618692363446, 77.00000000000001, 20, 82, True) +SketchArc_6 = Sketch_5.addArc(27.41619848709567, 84.99999999999999, 27.41618692363446, 77, 20, 82, True) SketchArc_6.setName("SketchArc_7") SketchArc_6.result().setName("SketchArc_7") SketchArc_6.results()[1].setName("SketchArc_7_2") @@ -304,7 +304,7 @@ SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_66") SketchConstraintDistance_15 = Sketch_5.setDistance(SketchLine_37.startPoint(), SketchLine_30.result(), "DBody") SketchConstraintDistance_15.setName("SketchConstraintDistance_16") model.do() -RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_30r-SketchLine_39r-SketchLine_32r-SketchLine_40r-SketchLine_38r-SketchArc_6_2f-SketchArc_7_2r")], model.selection("EDGE", "PartSet/OZ"), 45, 315, [model.selection("SOLID", "RevolutionFuse_2_1")]) +RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("WIRE", "Sketch_5/Face-SketchLine_38r-SketchLine_40r-SketchArc_6_2f-SketchLine_39r-SketchArc_7_2r-SketchLine_32r-SketchLine_30r_wire")], model.selection("EDGE", "PartSet/OZ"), 45, 315, [model.selection("SOLID", "RevolutionFuse_2_1")]) Sketch_6 = model.addSketch(Part_1_doc, model.standardPlane("YOZ")) SketchLine_38 = Sketch_6.addLine(19.99999999999999, 60, -20, 60) SketchLine_38.setName("SketchLine_48") @@ -318,11 +318,11 @@ SketchLine_40.result().setName("SketchLine_51") SketchLine_41 = Sketch_6.addLine(20, 30, 19.99999999999999, 60) SketchLine_41.setName("SketchLine_50") SketchLine_41.result().setName("SketchLine_50") -SketchLine_43 = Sketch_6.addLine(-19.99999999999998, 30.00000000000001, 20, 30.00000000000001) +SketchLine_43 = Sketch_6.addLine(-20, 30, 20, 30) SketchLine_43.setName("SketchLine_41") SketchLine_43.result().setName("SketchLine_41") SketchLine_43.setAuxiliary(True) -SketchLine_42 = Sketch_6.addLine(-19.99999999999999, 60, -19.99999999999998, 30.00000000000001) +SketchLine_42 = Sketch_6.addLine(-20, 60, -20, 30) SketchLine_42.setName("SketchLine_44") SketchLine_42.result().setName("SketchLine_44") SketchLine_42.setAuxiliary(True) @@ -394,7 +394,7 @@ SketchConstraintCoincidence_78 = Sketch_6.setCoincident(SketchLine_40.endPoint() SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_93") SketchConstraintCoincidence_79 = Sketch_6.setCoincident(SketchLine_39.startPoint(), SketchLine_49.result()) SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_94") -SketchPoint_3 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_30s-SketchLine_31s-SketchLine_38e")) +SketchPoint_3 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/SketchLine_30_StartVertex")) SketchConstraintDistance_16 = Sketch_6.setDistance(SketchLine_40.result(), SketchPoint_3.coordinates(), 20) SketchConstraintDistance_16.setName("SketchConstraintDistance_18") SketchConstraintDistance_17 = Sketch_6.setDistance(SketchPoint_3.coordinates(), SketchLine_41.result(), 20) @@ -417,7 +417,7 @@ Sketch_7 = model.addSketch(Part_1_doc, model.standardPlane("XOZ")) SketchLine_50 = Sketch_7.addLine(65, 23.09999999999939, 65, 23.00000523211526) SketchLine_50.setName("SketchLine_61") SketchLine_50.result().setName("SketchLine_61") -SketchLine_51 = Sketch_7.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_35")) +SketchLine_51 = Sketch_7.addLine(model.selection("EDGE", "Sketch_5/SketchLine_35")) SketchLine_51.setName("SketchLine_54") SketchLine_51.result().setName("SketchLine_54") SketchLine_52 = Sketch_7.addLine(65, 23.09999999999939, 65, 20) @@ -435,7 +435,7 @@ SketchLine_54.result().setName("SketchLine_55") SketchLine_54.setAuxiliary(True) SketchConstraintCoincidence_86 = Sketch_7.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint()) SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_96") -SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_6&RevolutionFuse_3_1/Modfied_5")) +SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "[RevolutionFuse_3_1/Modified_Face&Sketch_2/SketchLine_13][RevolutionFuse_3_1/Modified_Face&Sketch_1/SketchLine_7]")) SketchLine_55.setName("SketchLine_56") SketchLine_55.result().setName("SketchLine_56") SketchConstraintCoincidence_87 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result()) @@ -498,12 +498,12 @@ model.do() RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "PartSet/OZ"), 14.4, 14.4, [model.selection("SOLID", "ExtrusionCut_1_1")]) Sketch_8 = model.addSketch(Part_1_doc, model.standardPlane("XOZ")) SketchCircle_1 = Sketch_8.addCircle(0, 45, 12.5) -SketchLine_60 = Sketch_8.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_30")) +SketchLine_60 = Sketch_8.addLine(model.selection("EDGE", "Sketch_5/SketchLine_30")) SketchLine_60.setName("SketchLine_63") SketchLine_60.result().setName("SketchLine_63") SketchConstraintCoincidence_99 = Sketch_8.setCoincident(SketchCircle_1.center(), SketchLine_60.result()) SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_109") -SketchLine_61 = Sketch_8.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_38")) +SketchLine_61 = Sketch_8.addLine(model.selection("EDGE", "Sketch_5/SketchLine_38")) SketchLine_61.setName("SketchLine_64") SketchLine_61.result().setName("SketchLine_64") SketchConstraintDistance_22 = Sketch_8.setDistance(SketchCircle_1.center(), SketchLine_61.result(), 45) @@ -511,7 +511,7 @@ SketchConstraintDistance_22.setName("SketchConstraintDistance_24") SketchConstraintRadius_8 = Sketch_8.setRadius(SketchCircle_1.results()[1], 12.5) SketchConstraintRadius_8.setName("SketchConstraintRadius_13") model.do() -ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_1_2f")], model.selection(), 100, 100, [model.selection("SOLID", "RevolutionFuse_4_1")]) +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_1_2r")], model.selection(), 100, 100, [model.selection("SOLID", "RevolutionFuse_4_1")]) Sketch_9 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) SketchLine_62 = Sketch_9.addLine(0, 84, 0, -2) SketchLine_62.setName("SketchLine_65") @@ -596,7 +596,7 @@ SketchConstraintDistance_26 = Sketch_9.setDistance(SketchLine_71.endPoint(), Ske SketchConstraintDistance_26.setName("SketchConstraintDistance_28") SketchConstraintDistance_27 = Sketch_9.setDistance(SketchLine_72.endPoint(), SketchLine_63.result(), 15) SketchConstraintDistance_27.setName("SketchConstraintDistance_29") -SketchLine_76 = Sketch_9.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_32")) +SketchLine_76 = Sketch_9.addLine(model.selection("EDGE", "Sketch_5/SketchLine_32")) SketchLine_76.setName("SketchLine_75") SketchLine_76.result().setName("SketchLine_75") SketchConstraintDistance_28 = Sketch_9.setDistance(SketchLine_62.startPoint(), SketchLine_76.result(), 2) @@ -652,22 +652,22 @@ Sketch_10 = model.addSketch(Part_1_doc, model.standardPlane("XOY")) SketchLine_77 = Sketch_10.addLine(64, 20, 89, 20) SketchLine_77.setName("SketchLine_76") SketchLine_77.result().setName("SketchLine_76") -SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_9&RevolutionFuse_2_1/Modfied_6&RevolutionFuse_3_1/Modfied_divided_22_1&RevolutionFuse_2_1/Modfied_11")) +SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "[RevolutionFuse_3_1/Modified_Face&Sketch_1/SketchLine_1&weak_name_2][RevolutionFuse_2_1/Modified_Face&Sketch_1/SketchLine_8][RevolutionFuse_3_1/Modified_Face&Sketch_4/SketchLine_22&weak_name_2][RevolutionFuse_2_1/Generated_Face&Sketch_4/SketchLine_27]")) SketchConstraintCoincidence_122 = Sketch_10.setCoincident(SketchLine_77.startPoint(), SketchPoint_4.result()) SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_120") -SketchPoint_5 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_8e-SketchLine_4e")) +SketchPoint_5 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_1/SketchLine_1_StartVertex")) SketchConstraintCoincidence_123 = Sketch_10.setCoincident(SketchLine_77.endPoint(), SketchPoint_5.result()) SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_121") SketchLine_78 = Sketch_10.addLine(64, -20, 89, -20) SketchLine_78.setName("SketchLine_77") SketchLine_78.result().setName("SketchLine_77") -SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_10&RevolutionFuse_1_1/Modfied_5&RevolutionFuse_3_1/Modfied_divided_21_1&RevolutionFuse_1_1/Modfied_10")) +SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "[RevolutionFuse_3_1/Modified_Face&Sketch_2/SketchLine_9&weak_name_2][RevolutionFuse_1_1/Modified_Face&Sketch_2/SketchLine_14][RevolutionFuse_3_1/Modified_Face&Sketch_3/SketchLine_15&weak_name_2][RevolutionFuse_1_1/Generated_Face&Sketch_3/SketchLine_20]")) SketchConstraintCoincidence_124 = Sketch_10.setCoincident(SketchLine_78.startPoint(), SketchPoint_6.result()) SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_122") -SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_7&ExtrusionFuse_2_1/Modfied_6&RevolutionFuse_3_1/Modfied_10&RevolutionFuse_1_1/Modfied_5")) +SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "[ExtrusionFuse_2_1/Modified_Face&Sketch_1/SketchLine_1&weak_name_2][ExtrusionFuse_2_1/Modified_Face&Sketch_1/SketchLine_8][RevolutionFuse_3_1/Modified_Face&Sketch_2/SketchLine_9&weak_name_2][RevolutionFuse_1_1/Modified_Face&Sketch_2/SketchLine_14]")) SketchConstraintCoincidence_125 = Sketch_10.setCoincident(SketchLine_78.endPoint(), SketchPoint_7.result()) SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_123") -SketchArc_10 = Sketch_10.addArc(89.00000104846708, 1.669244441022778e-015, 89, -20, 89, 20, False) +SketchArc_10 = Sketch_10.addArc(89, 0, 89, -20, 89, 20, False) SketchArc_10.setName("SketchArc_13") SketchArc_10.result().setName("SketchArc_13") SketchArc_10.results()[1].setName("SketchArc_13_2") @@ -687,7 +687,7 @@ SketchConstraintCoincidence_129 = Sketch_10.setCoincident(SketchArc_11.startPoin SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_127") SketchConstraintTangent_19 = Sketch_10.setTangent(SketchArc_11.results()[1], SketchLine_78.result()) SketchConstraintTangent_19.setName("SketchConstraintTangent_24") -SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_divided_21_1&RevolutionFuse_1_1/Modfied_10&RevolutionFuse_3_1/Modfied_8")) +SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "[RevolutionFuse_3_1/Modified_Face&Sketch_3/SketchLine_15&weak_name_2][RevolutionFuse_1_1/Generated_Face&Sketch_3/SketchLine_20][(RevolutionFuse_1_1/Generated_Face&Sketch_3/SketchLine_20)(RevolutionFuse_3_1/Modified_Face&Sketch_3/SketchArc_3_2)(ExtrusionCut_2_1/Modified_Face&Sketch_5/SketchLine_40)]")) SketchConstraintCoincidence_130 = Sketch_10.setCoincident(SketchArc_11.endPoint(), SketchPoint_8.result()) SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_128") SketchArc_12 = Sketch_10.addArc(64.00001789135865, 23.01137360115889, 64, 20, 61.15622559702543, 22.02080994708722, True) @@ -698,7 +698,7 @@ SketchConstraintCoincidence_131 = Sketch_10.setCoincident(SketchArc_12.startPoin SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_129") SketchConstraintTangent_20 = Sketch_10.setTangent(SketchArc_12.results()[1], SketchLine_77.result()) SketchConstraintTangent_20.setName("SketchConstraintTangent_25") -SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_divided_22_1&RevolutionFuse_2_1/Modfied_11&RevolutionFuse_3_1/Modfied_7")) +SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "[RevolutionFuse_3_1/Modified_Face&Sketch_4/SketchLine_22&weak_name_2][RevolutionFuse_2_1/Generated_Face&Sketch_4/SketchLine_27][(RevolutionFuse_2_1/Generated_Face&Sketch_4/SketchLine_27)(RevolutionFuse_3_1/Modified_Face&Sketch_4/SketchArc_4_2)(ExtrusionCut_2_1/Modified_Face&Sketch_5/SketchLine_40)]")) SketchConstraintCoincidence_132 = Sketch_10.setCoincident(SketchArc_12.endPoint(), SketchPoint_9.result()) SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_130") SketchLine_79 = Sketch_10.addLine(61.15622559702543, 22.02080994708722, 59.81204392543111, 22.0208099470871) @@ -725,7 +725,7 @@ SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_136") SketchConstraintParallel_3 = Sketch_10.setParallel(SketchLine_78.result(), SketchLine_81.result()) SketchConstraintParallel_4 = Sketch_10.setParallel(SketchLine_77.result(), SketchLine_79.result()) SketchConstraintPerpendicular_1 = Sketch_10.setPerpendicular(SketchLine_80.result(), SketchLine_77.result()) -SketchPoint_10 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchPoint_3")) +SketchPoint_10 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_6/SketchPoint_3")) SketchMultiRotation_1_objects = [SketchArc_10.results()[1], SketchLine_77.result(), SketchLine_78.result(), SketchArc_12.results()[1], SketchLine_79.result(), SketchLine_80.result(), SketchLine_81.result(), SketchArc_11.results()[1]] SketchMultiRotation_1 = Sketch_10.addRotation(SketchMultiRotation_1_objects, SketchPoint_10.coordinates(), 120, 3) [SketchArc_13, SketchArc_14, SketchLine_82, SketchLine_83, SketchLine_84, SketchLine_85, SketchArc_15, SketchArc_16, SketchLine_86, SketchLine_87, SketchLine_88, SketchLine_89, SketchLine_90, SketchLine_91, SketchArc_17, SketchArc_18] = SketchMultiRotation_1.rotated() @@ -768,10 +768,10 @@ SketchArc_13.setName("SketchArc_16") SketchArc_13.result().setName("SketchArc_16") SketchArc_13.results()[1].setName("SketchArc_16_2") model.do() -ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchArc_16_2f-SketchLine_81r-SketchLine_82f-SketchArc_17_2r-SketchLine_83f-SketchLine_84f-SketchLine_85r-SketchArc_18_2r"), model.selection("FACE", "Sketch_10/Face-SketchArc_19_2f-SketchLine_86r-SketchLine_87f-SketchArc_20_2r-SketchLine_88f-SketchLine_89f-SketchLine_90r-SketchArc_21_2r")], model.selection(), 20, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchArc_16_2f-SketchLine_81r-SketchArc_17_2r-SketchLine_83f-SketchLine_84f-SketchLine_85r-SketchArc_18_2r-SketchLine_82f"), model.selection("FACE", "Sketch_10/Face-SketchArc_19_2f-SketchLine_86r-SketchArc_20_2r-SketchLine_88f-SketchLine_89f-SketchLine_90r-SketchArc_21_2r-SketchLine_87f")], model.selection(), 20, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) Sketch_11 = model.addSketch(Part_1_doc, model.standardPlane("XOY")) SketchCircle_2 = Sketch_11.addCircle(89, 0, 6) -SketchPoint_11 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_2/Vertex-SketchPoint_1-SketchLine_10s-SketchLine_9e")) +SketchPoint_11 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_2/SketchLine_90_EndVertex")) SketchConstraintCoincidence_139 = Sketch_11.setCoincident(SketchCircle_2.center(), SketchPoint_11.result()) SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_137") SketchConstraintRadius_11 = Sketch_11.setRadius(SketchCircle_2.results()[1], 6) @@ -788,8 +788,8 @@ SketchMultiRotation_2 = Sketch_11.addRotation([SketchCircle_3.results()[1], Sket [SketchCircle_4, SketchCircle_5, SketchCircle_6, SketchCircle_7] = SketchMultiRotation_2.rotated() model.do() RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "PartSet/OZ"), 0, 360, [model.selection("SOLID", "ExtrusionFuse_3_1")]) -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Wire-SketchCircle_4_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_5_2f")], model.selection(), 30, -15, [model.selection("SOLID", "RevolutionCut_1_1")]) -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Wire-SketchCircle_2_2f"), model.selection("FACE", "Sketch_11/Face-SketchCircle_6_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_7_2f")], model.selection(), 30, 2, [model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Face-SketchCircle_4_2f-SketchCircle_6_2r_wire"), model.selection("WIRE", "Sketch_11/Face-SketchCircle_3_2f-SketchCircle_2_2r_wire"), model.selection("WIRE", "Sketch_11/Face-SketchCircle_5_2f-SketchCircle_7_2r_wire")], model.selection(), 30, -15, [model.selection("SOLID", "RevolutionCut_1_1")]) +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Face-SketchCircle_2_2r_wire"), model.selection("FACE", "Sketch_11/Face-SketchCircle_6_2f"), model.selection("WIRE", "Sketch_11/Face-SketchCircle_7_2f_wire")], model.selection(), 30, 2, [model.selection("SOLID", "ExtrusionCut_3_1")]) # Test reexecution after parameter change Parameter_R.setValue(5) diff --git a/test.models/clothespin.py b/test.models/clothespin.py index f69307ae2..4b3b7bc96 100644 --- a/test.models/clothespin.py +++ b/test.models/clothespin.py @@ -133,20 +133,20 @@ SketchConstraintHorizontal_4.setName("SketchConstraintHorizontal_9") SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_5.startPoint(), SketchLine_2.result(), 32, False) SketchConstraintDistance_7.setName("SketchConstraintDistance_9") model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r")], model.selection(), 12, 0) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_14r-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchArc_2_2r-SketchLine_12r-SketchLine_11r-SketchLine_10r_wire")], model.selection(), 12, 0) Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOZ")) SketchArc_3 = Sketch_2.addArc(54, 6, 54, 12, 54, 0, True) -SketchLine_13 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/To_Face_1")) +SketchLine_13 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]")) SketchLine_13.setName("SketchLine_15") SketchLine_13.result().setName("SketchLine_15") SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchArc_3.startPoint(), SketchLine_13.result()) SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_23") -SketchLine_14 = Sketch_2.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")) +SketchLine_14 = Sketch_2.addLine(model.selection("EDGE", "Sketch_1/SketchLine_1")) SketchLine_14.setName("SketchLine_16") SketchLine_14.result().setName("SketchLine_16") SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_14.result()) SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_24") -SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12")) +SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3]")) SketchLine_15.setName("SketchLine_17") SketchLine_15.result().setName("SketchLine_17") SketchConstraintTangent_1 = Sketch_2.setTangent(SketchArc_3.results()[1], SketchLine_15.result()) @@ -180,13 +180,13 @@ SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_29") SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_20.endPoint()) SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30") model.do() -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")]) -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9")) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_22r-SketchLine_21r-SketchLine_20r-SketchLine_19r-SketchLine_18r-SketchArc_3_2r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")]) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_14")) SketchLine_21 = Sketch_3.addLine(28, -6, -4.270492394552598, -6) SketchLine_21.setName("SketchLine_23") SketchLine_21.result().setName("SketchLine_23") SketchLine_21.setAuxiliary(True) -SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9")) +SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_14]")) SketchLine_22.setName("SketchLine_24") SketchLine_22.result().setName("SketchLine_24") SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result()) @@ -304,26 +304,26 @@ SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_55") SketchConstraintMiddle_2 = Sketch_3.setMiddlePoint(SketchLine_34.result(), SketchPoint_4.coordinates()) SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchLine_21.result()) SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_56") -SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3")) +SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_14][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_5]")) SketchLine_35.setName("SketchLine_37") SketchLine_35.result().setName("SketchLine_37") SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_25.startPoint(), SketchLine_35.result()) SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_57") SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_24.result(), 31) SketchConstraintLength_10.setName("SketchConstraintLength_11") -SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5")) +SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9]")) SketchLine_36.setName("SketchLine_38") SketchLine_36.result().setName("SketchLine_38") SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_30.startPoint(), SketchLine_36.result()) SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_58") SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_30.result(), SketchLine_25.result()) model.do() -ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1")) +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face")) SketchLine_37 = Sketch_4.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599) SketchLine_37.setName("SketchLine_39") SketchLine_37.result().setName("SketchLine_39") -SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2")) +SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_11]")) SketchLine_38.setName("SketchLine_40") SketchLine_38.result().setName("SketchLine_40") SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_37.startPoint(), SketchLine_38.result()) @@ -369,8 +369,8 @@ SketchLine_42.result().setName("SketchLine_44") SketchLine_41.setName("SketchLine_43") SketchLine_41.result().setName("SketchLine_43") model.do() -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) -Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_7"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_5&ExtrusionCut_3_1/Modfied_3")) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/From_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10]"), model.selection("VERTEX", "[ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2]"), model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][_weak_name_35_ExtrusionCut_3_1][ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/To_Face]")) Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchArc_4 = Sketch_5.addArc(25, -7.50002056854448, 22, -7.5, 28, -7.5, True) SketchPoint_5 = Sketch_5.addPoint(22, -7.5) @@ -410,11 +410,11 @@ SketchConstraintVertical_11 = Sketch_5.setVertical(SketchLine_52.result()) SketchConstraintHorizontal_11 = Sketch_5.setHorizontal(SketchLine_51.result()) SketchConstraintHorizontal_11.setName("SketchConstraintHorizontal_12") model.do() -Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), 6, True) +Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/To_Face"), 6, True) Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 3, True) -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) -ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) -Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_6")) +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2r-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2r-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) +Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modified_Face&Extrusion_1_1/To_Face")) SketchArc_5 = Sketch_6.addArc(46, 0, 45.5, 0, 46.5, 0, False) SketchLine_53 = Sketch_6.addLine(0, 0, 54, 0) SketchLine_53.setName("SketchLine_55") @@ -464,8 +464,8 @@ SketchLine_57.result().setName("SketchLine_59") SketchLine_56.setName("SketchLine_58") SketchLine_56.result().setName("SketchLine_58") model.do() -ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")]) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_8")) +ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_14r-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchArc_2_2r-SketchLine_12r-SketchLine_11r-SketchLine_10r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")]) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "_weak_name_37_ExtrusionFuse_1_1")) SketchLine_64 = Sketch_7.addLine(50.25, -4.5, 31.25, -4.5) SketchLine_64.setName("SketchLine_76") SketchLine_64.result().setName("SketchLine_76") @@ -639,7 +639,7 @@ SketchConstraintRadius_7 = Sketch_7.setRadius(SketchArc_17.results()[1], 0.25) SketchConstraintRadius_7.setName("SketchConstraintRadius_10") model.do() ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")]) -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_10")) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modified_Face&Sketch_1/SketchLine_1&weak_name_1")) SketchPoint_12 = Sketch_8.addPoint(54, 0) SketchPoint_13 = Sketch_8.addPoint(54, 0) SketchConstraintRigid_7 = Sketch_8.setFixed(SketchPoint_13.result()) @@ -788,7 +788,7 @@ SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchPoint_21.coordina SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_145") model.do() ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")]) -Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_14")) +Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_7_1/Modified_Face&Extrusion_1_1/To_Face")) SketchLine_94 = Sketch_9.addLine(21, 4.163450069699051, 21, 0) SketchLine_94.setName("SketchLine_107") SketchLine_94.result().setName("SketchLine_107") @@ -931,7 +931,7 @@ model.do() Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 4, False) Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 4, True) ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection(), model.selection("FACE", "Plane_5"), 0, model.selection("FACE", "Plane_4"), 0, [model.selection("SOLID", "ExtrusionCut_7_1")]) -Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_8_1/Modfied_5")) +Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_8_1/Modified_Face&Sketch_1/SketchLine_1")) SketchCircle_1 = Sketch_10.addCircle(12, 6, 1) SketchConstraintRadius_9 = Sketch_10.setRadius(SketchCircle_1.results()[1], 1) SketchPoint_24 = Sketch_10.addPoint(0, 6) @@ -956,7 +956,7 @@ SketchConstraintCoincidence_174 = Sketch_10.setCoincident(SketchCircle_1.center( SketchConstraintCoincidence_174.setName("SketchConstraintCoincidence_178") SketchConstraintDistance_17 = Sketch_10.setDistance(SketchLine_105.result(), SketchCircle_1.center(), 12, False) model.do() -ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")]) +ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_10/Face-SketchCircle_1_2r_wire")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")]) model.do() Part_2 = model.addPart(partSet) Part_2_doc = Part_2.document() @@ -1068,20 +1068,20 @@ SketchConstraintHorizontal_26.setName("SketchConstraintHorizontal_9") SketchConstraintDistance_24 = Sketch_11.setDistance(SketchLine_111.startPoint(), SketchLine_108.result(), 32, False) SketchConstraintDistance_24.setName("SketchConstraintDistance_9") model.do() -Extrusion_2 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r")], model.selection(), 12, 0) +Extrusion_2 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_14r-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchArc_2_2r-SketchLine_12r-SketchLine_11r-SketchLine_10r_wire")], model.selection(), 12, 0) Sketch_12 = model.addSketch(Part_2_doc, model.standardPlane("XOZ")) SketchArc_26 = Sketch_12.addArc(54, 6, 54, 12, 54, 0, True) -SketchLine_119 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/To_Face_1")) +SketchLine_119 = Sketch_12.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]")) SketchLine_119.setName("SketchLine_15") SketchLine_119.result().setName("SketchLine_15") SketchConstraintCoincidence_193 = Sketch_12.setCoincident(SketchArc_26.startPoint(), SketchLine_119.result()) SketchConstraintCoincidence_193.setName("SketchConstraintCoincidence_23") -SketchLine_120 = Sketch_12.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")) +SketchLine_120 = Sketch_12.addLine(model.selection("EDGE", "Sketch_1/SketchLine_1")) SketchLine_120.setName("SketchLine_16") SketchLine_120.result().setName("SketchLine_16") SketchConstraintCoincidence_194 = Sketch_12.setCoincident(SketchArc_26.endPoint(), SketchLine_120.result()) SketchConstraintCoincidence_194.setName("SketchConstraintCoincidence_24") -SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12")) +SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3]")) SketchLine_121.setName("SketchLine_17") SketchLine_121.result().setName("SketchLine_17") SketchConstraintTangent_16 = Sketch_12.setTangent(SketchArc_26.results()[1], SketchLine_121.result()) @@ -1115,13 +1115,13 @@ SketchConstraintCoincidence_199.setName("SketchConstraintCoincidence_29") SketchConstraintCoincidence_200 = Sketch_12.setCoincident(SketchArc_26.endPoint(), SketchLine_126.endPoint()) SketchConstraintCoincidence_200.setName("SketchConstraintCoincidence_30") model.do() -ExtrusionCut_10 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")]) -Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9")) +ExtrusionCut_10 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_22r-SketchLine_21r-SketchLine_20r-SketchLine_19r-SketchLine_18r-SketchArc_3_2r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")]) +Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_14")) SketchLine_127 = Sketch_13.addLine(28, -6, -4.270492394552598, -6) SketchLine_127.setName("SketchLine_23") SketchLine_127.result().setName("SketchLine_23") SketchLine_127.setAuxiliary(True) -SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9")) +SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_14]")) SketchLine_128.setName("SketchLine_24") SketchLine_128.result().setName("SketchLine_24") SketchConstraintCoincidence_201 = Sketch_13.setCoincident(SketchLine_127.startPoint(), SketchLine_128.result()) @@ -1239,26 +1239,26 @@ SketchConstraintCoincidence_225.setName("SketchConstraintCoincidence_55") SketchConstraintMiddle_10 = Sketch_13.setMiddlePoint(SketchLine_140.result(), SketchPoint_28.coordinates()) SketchConstraintCoincidence_226 = Sketch_13.setCoincident(SketchPoint_28.coordinates(), SketchLine_127.result()) SketchConstraintCoincidence_226.setName("SketchConstraintCoincidence_56") -SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3")) +SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_14][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_5]")) SketchLine_141.setName("SketchLine_37") SketchLine_141.result().setName("SketchLine_37") SketchConstraintCoincidence_227 = Sketch_13.setCoincident(SketchLine_131.startPoint(), SketchLine_141.result()) SketchConstraintCoincidence_227.setName("SketchConstraintCoincidence_57") SketchConstraintLength_27 = Sketch_13.setLength(SketchLine_130.result(), 31) SketchConstraintLength_27.setName("SketchConstraintLength_11") -SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5")) +SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9]")) SketchLine_142.setName("SketchLine_38") SketchLine_142.result().setName("SketchLine_38") SketchConstraintCoincidence_228 = Sketch_13.setCoincident(SketchLine_136.startPoint(), SketchLine_142.result()) SketchConstraintCoincidence_228.setName("SketchConstraintCoincidence_58") SketchConstraintEqual_5 = Sketch_13.setEqual(SketchLine_136.result(), SketchLine_131.result()) model.do() -ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) -Sketch_14 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1")) +ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +Sketch_14 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face")) SketchLine_143 = Sketch_14.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599) SketchLine_143.setName("SketchLine_39") SketchLine_143.result().setName("SketchLine_39") -SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2")) +SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_11]")) SketchLine_144.setName("SketchLine_40") SketchLine_144.result().setName("SketchLine_40") SketchConstraintCoincidence_229 = Sketch_14.setCoincident(SketchLine_143.startPoint(), SketchLine_144.result()) @@ -1304,8 +1304,8 @@ SketchLine_148.result().setName("SketchLine_44") SketchLine_147.setName("SketchLine_43") SketchLine_147.result().setName("SketchLine_43") model.do() -ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) -Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_7"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_5&ExtrusionCut_3_1/Modfied_3")) +ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/From_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10]"), model.selection("VERTEX", "[ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2]"), model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][_weak_name_35_ExtrusionCut_3_1][ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/To_Face]")) Sketch_15 = model.addSketch(Part_2_doc, model.selection("FACE", "Plane_1")) SketchArc_27 = Sketch_15.addArc(25, -7.50002056854448, 22, -7.5, 28, -7.5, True) SketchPoint_29 = Sketch_15.addPoint(22, -7.5) @@ -1345,11 +1345,11 @@ SketchConstraintVertical_30 = Sketch_15.setVertical(SketchLine_158.result()) SketchConstraintHorizontal_33 = Sketch_15.setHorizontal(SketchLine_157.result()) SketchConstraintHorizontal_33.setName("SketchConstraintHorizontal_12") model.do() -Plane_10 = model.addPlane(Part_2_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), 6, True) +Plane_10 = model.addPlane(Part_2_doc, model.selection("FACE", "ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/To_Face"), 6, True) Plane_11 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 3, True) -ExtrusionCut_13 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) -ExtrusionCut_14 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) -Sketch_16 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_6")) +ExtrusionCut_13 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2r-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_14 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2r-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) +Sketch_16 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_4_1/Modified_Face&Extrusion_1_1/To_Face")) SketchArc_28 = Sketch_16.addArc(46, 0, 45.5, 0, 46.5, 0, False) SketchLine_159 = Sketch_16.addLine(0, 0, 54, 0) SketchLine_159.setName("SketchLine_55") @@ -1399,8 +1399,8 @@ SketchLine_163.result().setName("SketchLine_59") SketchLine_162.setName("SketchLine_58") SketchLine_162.result().setName("SketchLine_58") model.do() -ExtrusionFuse_2 = model.addExtrusionFuse(Part_2_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")]) -Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_8")) +ExtrusionFuse_2 = model.addExtrusionFuse(Part_2_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_14r-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchArc_2_2r-SketchLine_12r-SketchLine_11r-SketchLine_10r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")]) +Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "_weak_name_37_ExtrusionFuse_1_1")) SketchLine_170 = Sketch_17.addLine(50.25, -4.5, 31.25, -4.5) SketchLine_170.setName("SketchLine_76") SketchLine_170.result().setName("SketchLine_76") @@ -1574,7 +1574,7 @@ SketchConstraintRadius_16 = Sketch_17.setRadius(SketchArc_40.results()[1], 0.25) SketchConstraintRadius_16.setName("SketchConstraintRadius_10") model.do() ExtrusionCut_15 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")]) -Sketch_18 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_10")) +Sketch_18 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_6_1/Modified_Face&Sketch_1/SketchLine_1&weak_name_1")) SketchPoint_36 = Sketch_18.addPoint(54, 0) SketchPoint_37 = Sketch_18.addPoint(54, 0) SketchConstraintRigid_20 = Sketch_18.setFixed(SketchPoint_37.result()) @@ -1723,7 +1723,7 @@ SketchConstraintCoincidence_316 = Sketch_18.setCoincident(SketchPoint_45.coordin SketchConstraintCoincidence_316.setName("SketchConstraintCoincidence_145") model.do() ExtrusionCut_16 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")]) -Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_14")) +Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modified_Face&Extrusion_1_1/To_Face")) SketchLine_200 = Sketch_19.addLine(21, 4.163450069699051, 21, 0) SketchLine_200.setName("SketchLine_107") SketchLine_200.result().setName("SketchLine_107") @@ -1866,7 +1866,7 @@ model.do() Plane_12 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, False) Plane_13 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, True) ExtrusionCut_17 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection(), model.selection("FACE", "Plane_5"), 0, model.selection("FACE", "Plane_4"), 0, [model.selection("SOLID", "ExtrusionCut_7_1")]) -Sketch_20 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_8_1/Modfied_5")) +Sketch_20 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_8_1/Modified_Face&Sketch_1/SketchLine_1")) SketchCircle_2 = Sketch_20.addCircle(12, 6, 1) SketchConstraintRadius_18 = Sketch_20.setRadius(SketchCircle_2.results()[1], 1) SketchPoint_48 = Sketch_20.addPoint(0, 6) @@ -1891,11 +1891,11 @@ SketchConstraintCoincidence_348 = Sketch_20.setCoincident(SketchCircle_2.center( SketchConstraintCoincidence_348.setName("SketchConstraintCoincidence_178") SketchConstraintDistance_34 = Sketch_20.setDistance(SketchLine_211.result(), SketchCircle_2.center(), 12, False) model.do() -ExtrusionCut_18 = model.addExtrusionCut(Part_2_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")]) +ExtrusionCut_18 = model.addExtrusionCut(Part_2_doc, [model.selection("WIRE", "Sketch_10/Face-SketchCircle_1_2r_wire")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")]) model.do() -Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/ExtrusionCut_9_1/Modfied_1&ExtrusionCut_7_1/Modfied_19"), 180) -Placement_1 = model.addPlacement(partSet, [model.selection("COMPOUND", "Rotation_1/")], model.selection("FACE", "Rotation_1/ExtrusionCut_5_1/Modfied_5"), model.selection("FACE", "Part_1/ExtrusionCut_5_1/Modfied_5"), False, True) -Rotation_2 = model.addRotation(partSet, [model.selection("COMPOUND", "Placement_1/")], model.selection("EDGE", "Part_1/ExtrusionCut_5_1/Modfied_5&ExtrusionCut_8_1/Modfied_3"), 7) +Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/[ExtrusionCut_9_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_7_1/Modified_Face&Extrusion_1_1/From_Face]"), 180) +Placement_1 = model.addPlacement(partSet, [model.selection("COMPOUND", "Rotation_1/")], model.selection("FACE", "Rotation_1/ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Part_1/ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_9"), False, True) +Rotation_2 = model.addRotation(partSet, [model.selection("COMPOUND", "Placement_1/")], model.selection("EDGE", "Part_1/[ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_9][ExtrusionCut_8_1/Modified_Face&Sketch_3/SketchLine_35]"), 7) Rotation_2.result().setColor(255, 85, 0) model.end() diff --git a/test.models/ecran.py b/test.models/ecran.py index 1a0dc5ac0..7574a2620 100644 --- a/test.models/ecran.py +++ b/test.models/ecran.py @@ -115,12 +115,12 @@ SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 2) SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 2.3) SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_5.result(), SketchLine_9.startPoint()) model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.") +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_10f-SketchArc_1_2r-SketchLine_11f-SketchLine_4f-SketchLine_13f-SketchArc_2_2f-SketchLine_12f-SketchLine_8f-SketchLine_9f_wire")], model.selection(), "307/2.", "307/2.") Extrusion_1.setName("Profil") Extrusion_1.result().setName("Extrusion_1_1") -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3")) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_12")) SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3) -SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1")) +SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_12][Extrusion_1_1/To_Face]")) SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_1.result()) SketchLine_15 = Sketch_2.addLine(153.5, -2.3, 153.5, 7.7) SketchLine_16 = Sketch_2.addLine(153.5, 7.7, 149.5, 7.7) @@ -150,25 +150,25 @@ SketchConstraintLength_5 = Sketch_2.setLength(SketchLine_21.result(), 10) SketchConstraintLength_5.setName("SketchConstraintLength_6") SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_16.endPoint(), SketchLine_21.result(), 299) SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_20.result()) -SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1")) +SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_12][Extrusion_1_1/From_Face]")) SketchPoint_2.setName("SketchPoint_4") SketchPoint_2.result().setName("SketchPoint_4") SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchPoint_2.coordinates()) SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39") model.do() -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) ExtrusionCut_1.setName("Decoupe_Angle") ExtrusionCut_1.result().setName("ExtrusionCut_1_1") -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_2")) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8")) SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3) SketchLine_22.setName("SketchLine_29") SketchLine_22.result().setName("SketchLine_29") -SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2")) +SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9][ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8]")) SketchPoint_3.setName("SketchPoint_5") SketchPoint_3.result().setName("SketchPoint_5") SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchPoint_3.result()) SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_40") -SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2")) +SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8]")) SketchLine_23.setName("SketchLine_30") SketchLine_23.result().setName("SketchLine_30") SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.result()) @@ -193,7 +193,7 @@ SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_25.result(), 2) SketchConstraintLength_6.setName("SketchConstraintLength_8") SketchConstraintAngle_1 = Sketch_3.setAngleBackward(SketchLine_24.result(), SketchLine_25.result(), 45) SketchConstraintAngle_1.setName("SketchConstraintAngle_2") -SketchLine_26 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_8")) +SketchLine_26 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_8")) SketchLine_26.setName("SketchLine_34") SketchLine_26.result().setName("SketchLine_34") SketchConstraintMirror_1_objects = [SketchLine_22.result(), SketchLine_25.result(), SketchLine_24.result()] @@ -207,16 +207,16 @@ Sketch_3.result().setName("Sketch_4") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_2.setName("Chamfrein_1") ExtrusionCut_2.result().setName("ExtrusionCut_2_1") -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_5")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_13")) SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3) SketchLine_30.setName("SketchLine_35") SketchLine_30.result().setName("SketchLine_35") -SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_5&ExtrusionCut_1_1/Modfied_6")) +SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "[_weak_name_3_ExtrusionCut_2_1][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_13][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_4]")) SketchPoint_4.setName("SketchPoint_6") SketchPoint_4.result().setName("SketchPoint_6") SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchPoint_4.result()) SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43") -SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_5")) +SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "[_weak_name_3_ExtrusionCut_2_1][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_13]")) SketchLine_31.setName("SketchLine_36") SketchLine_31.result().setName("SketchLine_36") SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result()) @@ -260,7 +260,7 @@ SketchLine_38.setName("SketchLine_43") SketchLine_38.result().setName("SketchLine_43") SketchLine_38.setAuxiliary(True) SketchConstraintHorizontal_10 = Sketch_4.setHorizontal(SketchLine_38.result()) -SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_2_1/Modfied_2")) +SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face]"), False) SketchLine_39 = SketchProjection_1.createdFeature() SketchLine_39.setName("SketchLine_44") SketchLine_39.result().setName("SketchLine_44") @@ -291,15 +291,15 @@ SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_59") model.do() Sketch_4.setName("Sketch_5") Sketch_4.result().setName("Sketch_5") -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_7"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) -Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_3")) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_11"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_12")) SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714) SketchLine_40.setName("SketchLine_58") SketchLine_40.result().setName("SketchLine_58") SketchLine_41 = Sketch_5.addLine(152.2999838292651, -45.04999053274704, 153.5, -45.04999053274702) SketchLine_41.setName("SketchLine_57") SketchLine_41.result().setName("SketchLine_57") -SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_3")) +SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_12]")) SketchLine_42.setName("SketchLine_46") SketchLine_42.result().setName("SketchLine_46") SketchLine_43 = Sketch_5.addLine(150.8, -45.04999053274702, 153.5, -45.04999053274702) @@ -385,7 +385,7 @@ SketchLine_55.result().setName("SketchLine_54") SketchLine_55.setAuxiliary(True) SketchConstraintCoincidence_66 = Sketch_5.setCoincident(SketchPoint_5.coordinates(), SketchLine_55.startPoint()) SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_71") -SketchLine_56 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_1_1/Modfied_9")) +SketchLine_56 = Sketch_5.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_10]")) SketchLine_56.setName("SketchLine_55") SketchLine_56.result().setName("SketchLine_55") SketchConstraintCoincidence_67 = Sketch_5.setCoincident(SketchLine_55.endPoint(), SketchLine_56.result()) @@ -509,8 +509,9 @@ SketchLine_68.result().setName("SketchLine_73") model.do() Sketch_5.setName("Sketch_6") Sketch_5.result().setName("Sketch_6") -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")]) -Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_1")) +ExtrusionCut_4_objects_1 = [model.selection("WIRE", "Sketch_6/Face-SketchArc_9_2f-SketchLine_74r-SketchArc_10_2f-SketchLine_75r-SketchLine_73r-SketchLine_76r_wire"), model.selection("WIRE", "Sketch_6/Face-SketchLine_58r-SketchLine_51f-SketchLine_60f-SketchArc_5_2f-SketchLine_61f-SketchArc_4_2f_wire"), model.selection("WIRE", "Sketch_6/Face-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchArc_6_2f-SketchLine_63f-SketchArc_3_2f_wire")] +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_4_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")]) +Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_12")) SketchArc_11 = Sketch_6.addArc(44.89, -23.55, 43.89, -23.55, 44.89, -22.55, False) SketchArc_12 = Sketch_6.addArc(44.89, -13.55, 44.89, -14.55, 43.89, -13.55, False) SketchArc_13 = Sketch_6.addArc(5.89, -13.55, 6.89, -13.55, 5.89, -14.55, False) @@ -567,7 +568,7 @@ SketchLine_80 = Sketch_6.addLine(model.selection("EDGE", "PartSet/OY")) SketchLine_80.setName("SketchLine_85") SketchLine_80.result().setName("SketchLine_85") SketchConstraintDistance_12 = Sketch_6.setDistance(SketchLine_79.startPoint(), SketchLine_80.result(), 5.89) -SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/Edge-SketchLine_54")) +SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/SketchLine_54")) SketchLine_81.setName("SketchLine_86") SketchLine_81.result().setName("SketchLine_86") SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_76.endPoint(), SketchLine_81.result(), 5.3) @@ -845,15 +846,16 @@ SketchArc_35.results()[1].setName("SketchArc_36_2") model.do() Sketch_6.setName("Sketch_7") Sketch_6.result().setName("Sketch_7") -ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")]) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1")) +ExtrusionCut_5_objects_1 = [model.selection("WIRE", "Sketch_7/Face-SketchArc_20_2f-SketchLine_93r-SketchArc_21_2f-SketchLine_91r-SketchArc_23_2f-SketchLine_94f-SketchArc_22_2f-SketchLine_92f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_52_2f-SketchLine_116r-SketchArc_53_2f-SketchLine_115f-SketchArc_57_2f-SketchLine_121f-SketchArc_56_2f-SketchLine_114r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_44_2f-SketchLine_117r-SketchArc_45_2f-SketchLine_113f-SketchArc_49_2f-SketchLine_107f-SketchArc_48_2f-SketchLine_123r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_16_2f-SketchLine_90r-SketchArc_17_2f-SketchLine_88f-SketchArc_19_2f-SketchLine_87f-SketchArc_18_2f-SketchLine_89r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_11_2r-SketchLine_83f-SketchArc_12_2f-SketchLine_82r-SketchArc_14_2f-SketchLine_84r-SketchArc_15_2f-SketchLine_81f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_36_2f-SketchLine_119r-SketchArc_38_2f-SketchLine_129f-SketchArc_41_2f-SketchLine_127f-SketchArc_40_2f-SketchLine_108r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_37_2f-SketchLine_130f-SketchArc_42_2f-SketchLine_122r-SketchArc_43_2f-SketchLine_118r-SketchArc_39_2f-SketchLine_120f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_24_2f-SketchLine_103r-SketchArc_26_2f-SketchLine_98f-SketchArc_27_2f-SketchLine_101f-SketchArc_25_2f-SketchLine_100r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_30_2f-SketchLine_105r-SketchArc_34_2f-SketchLine_97f-SketchArc_35_2f-SketchLine_95f-SketchArc_31_2f-SketchLine_96r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_46_2f-SketchLine_124f-SketchArc_50_2f-SketchLine_125r-SketchArc_51_2f-SketchLine_128r-SketchArc_47_2f-SketchLine_126f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_54_2f-SketchLine_112f-SketchArc_58_2f-SketchLine_110r-SketchArc_59_2f-SketchLine_111r-SketchArc_55_2f-SketchLine_109f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_28_2f-SketchLine_102f-SketchArc_29_2f-SketchLine_104f-SketchArc_33_2f-SketchLine_99r-SketchArc_32_2f-SketchLine_106r_wire")] +ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_5_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")]) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_12")) SketchLine_126 = Sketch_7.addLine(-153.5, -37.05, -152.3, -37.05) SketchLine_126.setName("SketchLine_135") SketchLine_126.result().setName("SketchLine_135") SketchLine_127 = Sketch_7.addLine(-150.8, -38.55, -150.8, -43.55) SketchLine_127.setName("SketchLine_138") SketchLine_127.result().setName("SketchLine_138") -SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_67s-SketchLine_68e-SketchLine_69e")) +SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/SketchLine_67_StartVertex")) SketchPoint_10.setName("SketchPoint_12") SketchPoint_10.result().setName("SketchPoint_12") SketchLine_128 = Sketch_7.addLine(-150.8, -45.05, -153.5, -45.05) @@ -888,7 +890,7 @@ SketchConstraintHorizontal_18 = Sketch_7.setHorizontal(SketchLine_128.result()) SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_129.result()) SketchConstraintHorizontal_19 = Sketch_7.setHorizontal(SketchLine_132.result()) SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_131.result()) -SketchPoint_11 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_70s-SketchLine_72s-SketchLine_71e")) +SketchPoint_11 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/SketchLine_70_StartVertex")) SketchPoint_11.setName("SketchPoint_13") SketchPoint_11.result().setName("SketchPoint_13") SketchConstraintCoincidence_118 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchPoint_11.result()) @@ -939,7 +941,7 @@ model.do() Sketch_7.setName("Sketch_8") Sketch_7.result().setName("Sketch_8") ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_5_1")]) -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_2")) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modified_Face&Sketch_1/SketchLine_10")) SketchLine_134 = Sketch_8.addLine(0.85, 50.75, -0.85, 50.75) SketchLine_134.setName("SketchLine_139") SketchLine_134.result().setName("SketchLine_139") @@ -1019,7 +1021,7 @@ SketchConstraintCoincidence_148.setName("SketchConstraintCoincidence_158") SketchConstraintCoincidence_149 = Sketch_8.setCoincident(SketchArc_62.startPoint(), SketchLine_134.endPoint()) SketchConstraintCoincidence_149.setName("SketchConstraintCoincidence_159") SketchConstraintCoincidence_150 = Sketch_8.setCoincident(SketchArc_62.center(), SketchLine_137.result()) -SketchLine_140 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_6_1/Modfied_2")) +SketchLine_140 = Sketch_8.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_6_1/Modified_Face&Sketch_1/SketchLine_10]")) SketchLine_140.setName("SketchLine_145") SketchLine_140.result().setName("SketchLine_145") SketchConstraintDistance_18 = Sketch_8.setDistance(SketchLine_140.result(), SketchPoint_12.coordinates(), 6) @@ -1061,7 +1063,7 @@ SketchArc_65.results()[1].setName("SketchArc_66_2") model.do() Sketch_8.setName("Sketch_9") Sketch_8.result().setName("Sketch_9") -ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_147f-SketchLine_148f-SketchArc_64_2f-SketchArc_65_2f"), model.selection("FACE", "Sketch_9/Face-SketchLine_139f-SketchLine_141f-SketchArc_63_2f-SketchArc_62_2f"), model.selection("FACE", "Sketch_9/Face-SketchArc_66_2f-SketchArc_67_2f-SketchLine_149r-SketchLine_150r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_6_1")]) +ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_147f-SketchArc_65_2f-SketchLine_148f-SketchArc_64_2f"), model.selection("FACE", "Sketch_9/Face-SketchLine_139r-SketchArc_62_2f-SketchLine_141f-SketchArc_63_2f"), model.selection("FACE", "Sketch_9/Face-SketchArc_66_2f-SketchLine_150r-SketchArc_67_2f-SketchLine_149r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_6_1")]) model.do() # Test reexecution after parameter change diff --git a/test.models/flange.py b/test.models/flange.py index bf7d9362d..256e55d5c 100644 --- a/test.models/flange.py +++ b/test.models/flange.py @@ -65,7 +65,7 @@ SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_1.result(), SketchConst [SketchArc_5, SketchArc_6, SketchLine_6, SketchLine_7, SketchLine_8, SketchArc_7, SketchArc_8] = SketchConstraintMirror_1.mirrored() SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], "dint/2") model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2f-SketchArc_5_2r-SketchArc_6_2f-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchArc_7_2r-SketchArc_8_2f")], model.selection(), 35, 35) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchArc_3_2r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchArc_4_2f-SketchArc_2_2r-SketchArc_5_2r-SketchArc_6_2f-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchArc_7_2r-SketchArc_8_2f")], model.selection(), 35, 35) Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) SketchArc_9 = Sketch_2.addArc(0, 106, 0, 78, 0, 134, True) SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_9.results()[1], 28) @@ -79,7 +79,7 @@ SketchLine_11 = Sketch_2.addLine(0, 78, 0, 134) SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_11.startPoint()) SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_11.endPoint()) model.do() -Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2f-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0) +Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2r-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0) Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_1_1")]) Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ")) SketchLine_12 = Sketch_3.addLine(0, 106, -4, 106) @@ -110,9 +110,9 @@ SketchLine_16.setName("SketchLine_17") SketchLine_16.result().setName("SketchLine_17") SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_16.result()) model.do() -Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_12f-SketchLine_13f-SketchArc_10_2f-SketchLine_17r-SketchLine_18r")], model.selection(), "172/2", "172/2") +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchLine_12r-SketchLine_13f-SketchArc_10_2f-SketchLine_17r-SketchLine_18r_wire")], model.selection(), "172/2", "172/2") Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "Extrusion_2_1")]) -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_10")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5")) SketchLine_18 = Sketch_4.addLine(-65, 16, -65, -16) SketchLine_18.setName("SketchLine_19") SketchLine_18.result().setName("SketchLine_19") @@ -149,8 +149,8 @@ SketchConstraintTangent_5 = Sketch_4.setTangent(SketchLine_20.result(), SketchAr SketchConstraintTangent_6 = Sketch_4.setTangent(SketchLine_21.result(), SketchArc_11.results()[1]) SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_12.results()[1], SketchLine_20.result()) model.do() -Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchLine_21f-SketchLine_22r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), 0) -MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "Extrusion_1_1/To_Face_1&Extrusion_1_1/Generated_Face_12"), -130, 2) +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Face-SketchArc_11_2f-SketchLine_21f-SketchArc_12_2f-SketchLine_22r_wire")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"), 0) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "[Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3]"), -130, 2) Cut_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_2_1")], [model.selection("COMPOUND", "LinearCopy_1_1")]) model.do() diff --git a/test.models/gear.py b/test.models/gear.py index 217e25a83..a34b6744b 100644 --- a/test.models/gear.py +++ b/test.models/gear.py @@ -162,8 +162,8 @@ SketchConstraintHorizontal_6 = Sketch_3.setHorizontal(SketchLine_83.result()) SketchConstraintLength_9 = Sketch_3.setLength(SketchLine_84.result(), "2*R_fillet") SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_83.result(), "2*R_fillet") model.do() -Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1")], model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_1"), 360, 0) -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_1")) +Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "PartSet/Sketch_1")], model.selection("EDGE", "PartSet/Sketch_1/SketchLine_1"), 360, 0) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "_weak_name_1_Revolution_1_1")) SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin")) SketchLine_86 = Sketch_4.addLine(0, -13.49999999999519, 3.1, -13.49999999999519) SketchLine_87 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OZ")) @@ -195,7 +195,7 @@ SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_6.coordinate SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchLine_89.result()) SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_6.coordinates(), SketchLine_86.result(), 24.5) model.do() -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "_weak_name_5_Revolution_1_1"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "PartSet/OX"), 0, 360, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 0, 5, [model.selection("SOLID", "RevolutionCut_1_1")]) model.do() diff --git a/test.models/idler_plate.py b/test.models/idler_plate.py index c00585ba7..9c105d2ea 100644 --- a/test.models/idler_plate.py +++ b/test.models/idler_plate.py @@ -131,13 +131,13 @@ SketchConstraintRadius_10 = Sketch_1.setRadius(SketchArc_16.results()[1], 6.25) SketchConstraintRadius_11 = Sketch_1.setRadius(SketchArc_13.results()[1], 6.25) SketchConstraintTangent_14 = Sketch_1.setTangent(SketchLine_6.result(), SketchArc_8.results()[1]) model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_2_2r-SketchArc_3_2f-SketchArc_4_2r-SketchArc_5_2r-SketchArc_6_2r-SketchLine_3r-SketchLine_4f-SketchArc_7_2r-SketchCircle_1_2r-SketchCircle_2_2r-SketchArc_8_2f-SketchArc_9_2f-SketchArc_10_2r-SketchLine_6r-SketchArc_11_2f-SketchLine_7f-SketchArc_12_2f-SketchArc_13_2r-SketchArc_14_2f-SketchArc_15_2f-SketchArc_16_2r")], model.selection(), 0, 2) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_8_2f-SketchLine_7f-SketchArc_11_2f-SketchArc_13_2r-SketchArc_12_2f-SketchArc_14_2f-SketchArc_15_2f-SketchArc_16_2r-SketchArc_9_2f-SketchArc_10_2r-SketchLine_6r-SketchCircle_1_2r-SketchArc_3_2f-SketchArc_5_2r-SketchArc_4_2r-SketchArc_2_2r-SketchLine_3r-SketchArc_7_2r-SketchLine_4f-SketchArc_6_2r-SketchCircle_2_2r")], model.selection(), 0, 2) Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) -SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchArc_7")) +SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/SketchArc_7")) SketchArc_17 = Sketch_2.addArc(-24.92, -4.314010717669617e-016, -24.92, 7.500000000006299, -24.92, -7.500000000006299, True) SketchConstraintCoincidence_41 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchArc_17.center()) -SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchArc_8_2s-SketchLine_6s")) -SketchPoint_3 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchArc_6-SketchArc_8")) +SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/SketchArc_8_2_StartVertex")) +SketchPoint_3 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/SketchArc_6")) SketchArc_18 = Sketch_2.addArc(-34.92, 0, -34.91999999999937, 7.500000000006299, -34.92003434105975, -7.500000000006299, False) SketchConstraintCoincidence_42 = Sketch_2.setCoincident(SketchPoint_3.result(), SketchArc_18.center()) SketchConstraintCoincidence_43 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchArc_18.startPoint()) @@ -151,19 +151,19 @@ SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result()) SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result()) SketchConstraintTangent_15 = Sketch_2.setTangent(SketchLine_8.result(), SketchArc_17.results()[1]) SketchConstraintTangent_16 = Sketch_2.setTangent(SketchArc_17.results()[1], SketchLine_9.result()) -SketchPoint_4 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Edge-SketchCircle_2_2__cc")) +SketchPoint_4 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/SketchCircle_2_2__cc")) SketchCircle_3 = Sketch_2.addCircle(-7.5, 18.75, 8.125) SketchConstraintCoincidence_48 = Sketch_2.setCoincident(SketchPoint_4.result(), SketchCircle_3.center()) -SketchArc_19 = Sketch_2.addArc(model.selection("EDGE", "Sketch_1/Edge-SketchArc_9_2")) +SketchArc_19 = Sketch_2.addArc(model.selection("EDGE", "Sketch_1/SketchArc_9_2")) SketchConstraintEqual_1 = Sketch_2.setEqual(SketchCircle_3.results()[1], SketchArc_19.results()[1]) -SketchPoint_5 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Edge-SketchCircle_1_2__cc")) +SketchPoint_5 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/SketchCircle_1_2__cc")) SketchCircle_4 = Sketch_2.addCircle(0, 0, 8.75) SketchConstraintCoincidence_49 = Sketch_2.setCoincident(SketchPoint_5.result(), SketchCircle_4.center()) SketchConstraintRadius_12 = Sketch_2.setRadius(SketchCircle_4.results()[1], "17.5/2") model.do() -Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_8"), model.selection("EDGE", "Sketch_2/Edge-SketchArc_17_2"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_9"), model.selection("EDGE", "Sketch_2/Edge-SketchArc_18_2"), model.selection("EDGE", "Sketch_1/Edge-SketchArc_6_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchArc_7_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")]) -Face_2 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_1/Edge-SketchCircle_2_2")]) -Face_3 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")]) +Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_8"), model.selection("EDGE", "Sketch_2/SketchArc_17_2"), model.selection("EDGE", "Sketch_2/SketchLine_9"), model.selection("EDGE", "Sketch_2/SketchArc_18_2"), model.selection("EDGE", "Sketch_1/SketchArc_6_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchArc_7_2"), model.selection("EDGE", "Sketch_1/SketchLine_4")]) +Face_2 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchCircle_3_2"), model.selection("EDGE", "Sketch_1/SketchCircle_2_2")]) +Face_3 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchCircle_4_2"), model.selection("EDGE", "Sketch_1/SketchCircle_1_2")]) Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_3_1")], model.selection(), 2, 0) Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2"), model.selection("SOLID", "Extrusion_2_3")], []) model.do() diff --git a/test.models/piece_02.py b/test.models/piece_02.py index 95025acd1..ea2d58dd6 100644 --- a/test.models/piece_02.py +++ b/test.models/piece_02.py @@ -70,28 +70,28 @@ SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 36) SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_5.result(), 32) SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_6.result()) model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_5r-SketchLine_6r-SketchArc_1_2f-SketchArc_2_2f-SketchArc_3_2f-SketchArc_4_2f")], model.selection(), 76, 0) -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1")) -SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1")) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_3_2f-SketchLine_3f-SketchArc_4_2f-SketchLine_6r-SketchArc_2_2f-SketchLine_5r-SketchArc_1_2f-SketchLine_1r")], model.selection(), 76, 0) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face")) +SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]")) SketchLine_7.setName("SketchLine_8") SketchLine_7.result().setName("SketchLine_8") SketchLine_8 = Sketch_2.addLine(21, 45.99999999998655, 20.99999999998684, 0) SketchLine_8.setName("SketchLine_9") SketchLine_8.result().setName("SketchLine_9") SketchLine_8.setAuxiliary(True) -SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1")) +SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/To_Face]")) SketchLine_9.setName("SketchLine_10") SketchLine_9.result().setName("SketchLine_10") SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result()) SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18") -SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1")) +SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]")) SketchLine_10.setName("SketchLine_11") SketchLine_10.result().setName("SketchLine_11") SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.result()) SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19") SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_9.result()) SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_10.result()) -SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1")) +SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]")) SketchLine_11.setName("SketchLine_12") SketchLine_11.result().setName("SketchLine_12") SketchPoint_1 = Sketch_2.addPoint(20.99999999999342, 22.99999999999327) @@ -128,8 +128,8 @@ SketchConstraintMiddle_4 = Sketch_2.setMiddlePoint(SketchLine_12.endPoint(), Ske SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_2.results()[1], 2.5) SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_12.result(), SketchCircle_4.center(), 8) model.do() -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2r"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_3_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")]) -ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f-SketchCircle_2_2r-SketchCircle_3_2r-SketchCircle_4_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f-SketchCircle_2_2r-SketchCircle_3_2r-SketchCircle_4_2r_wire_2"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_3_2f_wire")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) SketchCircle_5 = Sketch_3.addCircle(20.99999999999342, 22.99999999999327, 19) SketchConstraintRadius_4 = Sketch_3.setRadius(SketchCircle_5.results()[1], 19) @@ -137,12 +137,12 @@ SketchLine_13 = Sketch_3.addLine(41.99999999999999, 22.99999999998655, 0, 22.999 SketchLine_13.setName("SketchLine_14") SketchLine_13.result().setName("SketchLine_14") SketchLine_13.setAuxiliary(True) -SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5")) +SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]")) SketchLine_14.setName("SketchLine_15") SketchLine_14.result().setName("SketchLine_15") SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_14.result()) SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27") -SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_2_1/Modfied_2")) +SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face]")) SketchLine_15.setName("SketchLine_16") SketchLine_15.result().setName("SketchLine_16") SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result()) @@ -151,12 +151,12 @@ SketchLine_16 = Sketch_3.addLine(21, 45.99999999998655, 20.99999999998684, 0) SketchLine_16.setName("SketchLine_17") SketchLine_16.result().setName("SketchLine_17") SketchLine_16.setAuxiliary(True) -SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3")) +SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]")) SketchLine_17.setName("SketchLine_18") SketchLine_17.result().setName("SketchLine_18") SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchLine_17.result()) SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29") -SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_3")) +SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_3")) SketchLine_18.setName("SketchLine_19") SketchLine_18.result().setName("SketchLine_19") SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchLine_18.result()) @@ -182,26 +182,26 @@ SketchConstraintRadius_5 = Sketch_3.setRadius(SketchCircle_7.results()[1], 2.5) SketchConstraintDistance_4 = Sketch_3.setDistance(SketchCircle_6.center(), SketchCircle_7.center(), 16) SketchConstraintDistance_5 = Sketch_3.setDistance(SketchCircle_6.center(), SketchLine_16.result(), 8) model.do() -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2f-SketchCircle_6_2r-SketchCircle_7_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2r-SketchCircle_7_2r-SketchCircle_6_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) ExtrusionCut_3.result().setName("ExtrusionCut_3_1") -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3")) -SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5")) +SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2]"), False) SketchLine_19 = SketchProjection_1.createdFeature() SketchLine_19.setName("SketchLine_20") SketchLine_19.result().setName("SketchLine_20") -SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4")) +SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2]"), False) SketchLine_20 = SketchProjection_2.createdFeature() SketchLine_20.setName("SketchLine_21") SketchLine_20.result().setName("SketchLine_21") SketchLine_21 = Sketch_4.addLine(4.999999999999999, -28, 37, -28) SketchLine_21.setName("SketchLine_22") SketchLine_21.result().setName("SketchLine_22") -SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3")) +SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]")) SketchLine_22.setName("SketchLine_23") SketchLine_22.result().setName("SketchLine_23") SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result()) SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35") -SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4")) +SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2]")) SketchLine_23.setName("SketchLine_24") SketchLine_23.result().setName("SketchLine_24") SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_23.result()) @@ -266,8 +266,8 @@ SketchConstraintMiddle_10 = Sketch_4.setMiddlePoint(SketchLine_27.endPoint(), Sk SketchConstraintMiddle_11 = Sketch_4.setMiddlePoint(SketchLine_27.startPoint(), SketchLine_19.result()) SketchConstraintMiddle_12 = Sketch_4.setMiddlePoint(SketchLine_25.result(), SketchLine_27.startPoint()) model.do() -Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_22r-SketchLine_25f-SketchLine_26f-SketchLine_27r-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f")], model.selection(), 2, 17) -Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_1")) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchArc_5_2f-SketchLine_26f-SketchArc_6_2f-SketchLine_25f-SketchArc_8_2f-SketchLine_27r-SketchArc_7_2f-SketchLine_22r")], model.selection(), 2, 17) +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face")) SketchLine_28 = Sketch_5.addLine(5.000000000000001, -46, 37.00000000000001, -46) SketchLine_28.setName("SketchLine_29") SketchLine_28.result().setName("SketchLine_29") @@ -286,19 +286,19 @@ SketchConstraintVertical_2 = Sketch_5.setVertical(SketchLine_30.result()) SketchConstraintVertical_3 = Sketch_5.setVertical(SketchLine_31.result()) SketchConstraintEqual_8 = Sketch_5.setEqual(SketchLine_29.result(), SketchLine_28.result()) SketchConstraintEqual_9 = Sketch_5.setEqual(SketchLine_31.result(), SketchLine_30.result()) -SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1")) +SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_26][Extrusion_2_1/To_Face]")) SketchLine_32.setName("SketchLine_33") SketchLine_32.result().setName("SketchLine_33") SketchConstraintDistance_7 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_32.result(), 2) -SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1")) +SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_27][Extrusion_2_1/To_Face]")) SketchLine_33.setName("SketchLine_34") SketchLine_33.result().setName("SketchLine_34") SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_31.startPoint(), SketchLine_33.result(), 2) -SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1")) +SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_22][Extrusion_2_1/To_Face]")) SketchLine_34.setName("SketchLine_35") SketchLine_34.result().setName("SketchLine_35") SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_29.startPoint(), SketchLine_34.result(), 2) -SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1")) +SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_25][Extrusion_2_1/To_Face]")) SketchLine_35.setName("SketchLine_36") SketchLine_35.result().setName("SketchLine_36") SketchConstraintDistance_10 = Sketch_5.setDistance(SketchLine_28.startPoint(), SketchLine_35.result(), 2) @@ -363,7 +363,7 @@ SketchConstraintMiddle_15 = Sketch_5.setMiddlePoint(SketchLine_37.startPoint(), SketchConstraintMiddle_16 = Sketch_5.setMiddlePoint(SketchLine_37.endPoint(), SketchLine_35.result()) SketchConstraintDistance_12 = Sketch_5.setDistance(SketchCircle_8.center(), SketchLine_37.result(), 8) model.do() -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_29f-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchArc_9_2f-SketchArc_10_2f-SketchArc_11_2f-SketchArc_12_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Face-SketchLine_29r-SketchArc_12_2f-SketchLine_32r-SketchArc_11_2f-SketchLine_30r-SketchArc_9_2f-SketchLine_31r-SketchArc_10_2f-SketchCircle_9_2r-SketchCircle_8_2r_wire")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")]) ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_8_2f"), model.selection("FACE", "Sketch_5/Face-SketchCircle_9_2f")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionCut_4_1"), model.selection("SOLID", "ExtrusionCut_4_2")]) Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ")) SketchLine_38 = Sketch_6.addLine(-59, 44, -59, 2) @@ -420,33 +420,33 @@ SketchConstraintLength_3 = Sketch_6.setLength(SketchLine_38.result(), 42) SketchConstraintLength_4 = Sketch_6.setLength(SketchLine_43.result(), 20) SketchConstraintLength_5 = Sketch_6.setLength(SketchLine_44.result(), 15) SketchConstraintLength_6 = Sketch_6.setLength(SketchLine_39.result(), 42) -SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6")) +SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2]"), False) SketchLine_46 = SketchProjection_3.createdFeature() SketchLine_46.setName("SketchLine_47") SketchLine_46.result().setName("SketchLine_47") -SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_1_1/Modfied_1")) +SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchCircle_1_2)]"), False) SketchLine_47 = SketchProjection_4.createdFeature() SketchLine_47.setName("SketchLine_48") SketchLine_47.result().setName("SketchLine_48") -SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6")) +SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2]"), False) SketchLine_48 = SketchProjection_5.createdFeature() SketchLine_48.setName("SketchLine_49") SketchLine_48.result().setName("SketchLine_49") SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), SketchLine_46.result(), 2) SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17) model.do() -ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_5"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")]) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1")) +ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")]) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1")) SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655) SketchLine_49.setName("SketchLine_50") SketchLine_49.result().setName("SketchLine_50") SketchLine_49.setAuxiliary(True) -SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_2")) +SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_3_1/Generated_Face&Sketch_3/SketchCircle_5_2)]")) SketchLine_50.setName("SketchLine_51") SketchLine_50.result().setName("SketchLine_51") SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_49.startPoint(), SketchLine_50.result()) SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_75") -SketchPoint_3 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_13s")) +SketchPoint_3 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_2/SketchLine_13_StartVertex")) SketchConstraintCoincidence_75 = Sketch_7.setCoincident(SketchLine_49.endPoint(), SketchPoint_3.result()) SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_76") SketchConstraintMiddle_17 = Sketch_7.setMiddlePoint(SketchLine_49.startPoint(), SketchLine_50.result()) @@ -454,12 +454,12 @@ SketchLine_51 = Sketch_7.addLine(-38, -40.99999999998656, -38, -4.99999999998656 SketchLine_51.setName("SketchLine_52") SketchLine_51.result().setName("SketchLine_52") SketchLine_51.setAuxiliary(True) -SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_3")) +SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2]")) SketchLine_52.setName("SketchLine_53") SketchLine_52.result().setName("SketchLine_53") SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result()) SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_77") -SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1")) +SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1]")) SketchLine_53.setName("SketchLine_54") SketchLine_53.result().setName("SketchLine_54") SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_53.result()) @@ -475,13 +475,13 @@ SketchConstraintCoincidence_79 = Sketch_7.setCoincident(SketchPoint_4.coordinate SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_80") SketchConstraintRadius_8 = Sketch_7.setRadius(SketchCircle_10.results()[1], 17) model.do() -Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 16, 0) -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_3_1/To_Face_1")) -SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/Edge-SketchLine_9")) +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_7/Face-SketchCircle_10_2f_wire")], model.selection(), 16, 0) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_3_1/To_Face")) +SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/SketchLine_9"), False) SketchLine_54 = SketchProjection_6.createdFeature() SketchLine_54.setName("SketchLine_55") SketchLine_54.result().setName("SketchLine_55") -SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_2")) +SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_3_1/Generated_Face&Sketch_3/SketchCircle_5_2)]"), False) SketchLine_55 = SketchProjection_7.createdFeature() SketchLine_55.setName("SketchLine_56") SketchLine_55.result().setName("SketchLine_56") @@ -506,11 +506,11 @@ SketchConstraintMiddle_23 = Sketch_8.setMiddlePoint(SketchLine_56.result(), Sket SketchConstraintCoincidence_83 = Sketch_8.setCoincident(SketchLine_57.result(), SketchPoint_5.coordinates()) SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_84") SketchConstraintPerpendicular_1 = Sketch_8.setPerpendicular(SketchLine_57.result(), SketchLine_56.result()) -SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_3")) +SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2]"), False) SketchLine_58 = SketchProjection_8.createdFeature() SketchLine_58.setName("SketchLine_59") SketchLine_58.result().setName("SketchLine_59") -SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1")) +SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1]"), False) SketchLine_59 = SketchProjection_9.createdFeature() SketchLine_59.setName("SketchLine_60") SketchLine_59.result().setName("SketchLine_60") @@ -530,7 +530,7 @@ SketchConstraintDistance_15 = Sketch_8.setDistance(SketchCircle_11.center(), Ske SketchConstraintDistance_16 = Sketch_8.setDistance(SketchCircle_11.center(), SketchCircle_12.center(), 16) model.do() Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_8/Face-SketchCircle_12_2f")], model.selection(), 17, 0) -Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_2"), 38, True) +Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_3_1/Generated_Face&Sketch_3/SketchCircle_5_2)"), 38, True) Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchLine_60 = Sketch_9.addLine(-14, -36.99999999998992, 0, -36.99999999998992) SketchLine_60.setName("SketchLine_61") @@ -562,19 +562,19 @@ SketchLine_64 = Sketch_9.addLine(-5.662490896925754, -22.99999999998992, -60.521 SketchLine_64.setName("SketchLine_65") SketchLine_64.result().setName("SketchLine_65") SketchLine_64.setAuxiliary(True) -SketchPoint_6 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_8/Vertex-SketchPoint_5")) +SketchPoint_6 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_8/SketchPoint_5")) SketchConstraintCoincidence_92 = Sketch_9.setCoincident(SketchLine_64.result(), SketchPoint_6.coordinates()) SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_93") SketchConstraintHorizontal_13 = Sketch_9.setHorizontal(SketchLine_64.result()) SketchConstraintCoincidence_93 = Sketch_9.setCoincident(SketchLine_62.startPoint(), SketchLine_64.result()) SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_94") -SketchLine_65 = Sketch_9.addLine(model.selection("EDGE", "Sketch_7/Edge-SketchLine_52")) +SketchLine_65 = Sketch_9.addLine(model.selection("EDGE", "Sketch_7/SketchLine_52")) SketchLine_65.setName("SketchLine_66") SketchLine_65.result().setName("SketchLine_66") SketchConstraintCoincidence_94 = Sketch_9.setCoincident(SketchLine_60.endPoint(), SketchLine_65.result()) SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_95") model.do() -RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")]) +RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")]) model.do() from GeomAPI import GeomAPI_Shape diff --git a/test.models/piece_09.py b/test.models/piece_09.py index 99e22b96c..188d4b11a 100644 --- a/test.models/piece_09.py +++ b/test.models/piece_09.py @@ -147,12 +147,12 @@ SketchConstraintDistance_5 = Sketch_1.setDistance(SketchArc_2.center(), SketchAr SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_1.result(), SketchArc_6.endPoint(), "(h4-d_diff)*coeff") SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_10.result(), "d1*coeff") model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchArc_1_2f-SketchLine_3f-SketchArc_2_2r-SketchLine_4f-SketchArc_3_2r-SketchLine_5f-SketchArc_4_2f-SketchLine_6f-SketchLine_7r-SketchLine_8r-SketchArc_5_2r-SketchLine_9r-SketchArc_6_2f-SketchLine_10r-SketchArc_7_2f-SketchLine_11r-SketchArc_8_2r-SketchLine_12r-SketchLine_13r")], model.selection(), "epaisseur_plat*coeff", 0) -Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), "d2*coeff", True) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchArc_1_2f-SketchLine_3f-SketchArc_2_2r-SketchLine_4f-SketchArc_3_2r-SketchLine_5f-SketchArc_4_2f-SketchLine_6f-SketchLine_13r-SketchLine_12r-SketchArc_8_2r-SketchLine_11r-SketchArc_7_2f-SketchLine_10r-SketchArc_6_2f-SketchLine_9r-SketchArc_5_2r-SketchLine_8r-SketchLine_7r_wire")], model.selection(), "epaisseur_plat*coeff", 0) +Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7"), "d2*coeff", True) Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) -SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), False) +SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_7_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10]"), False) SketchLine_14 = SketchProjection_1.createdFeature() -SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/To_Face_1"), False) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_11][Extrusion_1_1/To_Face]"), False) SketchLine_15 = SketchProjection_2.createdFeature() SketchLine_16 = Sketch_2.addLine(-24.99999999999999, -35.00000000000001, -31.24999999999999, -35.00000000000001) SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_16.startPoint()) @@ -208,10 +208,10 @@ SketchConstraintEqual_10 = Sketch_2.setEqual(SketchArc_11.results()[1], SketchAr SketchConstraintRadius_4 = Sketch_2.setRadius(SketchArc_12.results()[1], "r3*coeff") SketchConstraintDistance_13 = Sketch_2.setDistance(SketchArc_10.startPoint(), SketchLine_19.result(), "d8*coeff") model.do() -Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_16r-SketchArc_9_2f-SketchLine_17r-SketchArc_10_2f-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchArc_11_2r-SketchLine_21r-SketchArc_12_2r-SketchLine_22r-SketchLine_23f")], model.selection(), "d6*coeff", 0) -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face_3")) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_23f-SketchLine_22r-SketchArc_12_2r-SketchLine_21r-SketchArc_11_2r-SketchLine_20r-SketchLine_19r-SketchLine_18r-SketchArc_10_2f-SketchLine_17r-SketchArc_9_2f-SketchLine_16r_wire")], model.selection(), "d6*coeff", 0) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_17")) SketchLine_24 = Sketch_3.addLine(46.25, 22.91561885925604, 51.3, 20.00000000000001) -SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1")) +SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_17][Extrusion_2_1/To_Face]")) SketchLine_26 = Sketch_3.addLine(51.3, 20.00000000000001, 62.50000000000001, 20.00000000000001) SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchLine_24.endPoint(), SketchLine_26.startPoint()) SketchLine_27 = Sketch_3.addLine(62.50000000000001, 20.00000000000001, 62.5, -4.999999999999999) @@ -238,9 +238,9 @@ SketchConstraintVertical_12 = Sketch_3.setVertical(SketchLine_27.result()) SketchConstraintVertical_13 = Sketch_3.setVertical(SketchLine_33.result()) SketchConstraintVertical_14 = Sketch_3.setVertical(SketchLine_31.result()) SketchConstraintAngle_1 = Sketch_3.setAngleComplementary(SketchLine_26.result(), SketchLine_24.result(), "angle") -SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_4")) +SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_18][Extrusion_2_1/Generated_Face&Sketch_2/SketchArc_10_2]"), False) SketchLine_34 = SketchProjection_3.createdFeature() -SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_1")) +SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchArc_9_2][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_16]"), False) SketchLine_35 = SketchProjection_4.createdFeature() SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_28.endPoint(), SketchLine_34.result()) SketchConstraintDistance_15 = Sketch_3.setDistance(SketchLine_31.result(), SketchLine_33.endPoint(), "(d6-d5)*coeff") @@ -252,15 +252,15 @@ SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_29.endPoint() SketchConstraintDistance_17 = Sketch_3.setDistance(SketchLine_26.result(), SketchAPI_Line(SketchLine_35).startPoint(), "h2*coeff") SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_26.result(), "d7*coeff") model.do() -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_24r-SketchLine_26r-SketchLine_27r-SketchLine_28r-SketchLine_29r")], model.selection(), model.selection("FACE", "Extrusion_2_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_2_1")]) -ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchLine_33r")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) -Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), "d3*coeff", True) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_29r-SketchLine_28r-SketchLine_27r-SketchLine_26r-SketchLine_24r")], model.selection(), model.selection("FACE", "Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_19"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_2_1")]) +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_33r-SketchLine_32r-SketchLine_31r-SketchLine_30r")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7"), "d3*coeff", True) Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2")) -SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_1")) +SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9][Extrusion_1_1/To_Face]"), False) SketchLine_36 = SketchProjection_5.createdFeature() -SketchProjection_6 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_8&ExtrusionCut_2_1/Modfied_9")) +SketchProjection_6 = Sketch_4.addProjection(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_2/SketchLine_23][_weak_name_4_ExtrusionCut_2_1]"), False) SketchLine_37 = SketchProjection_6.createdFeature() -SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5")) +SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_6_2]"), False) SketchLine_38 = SketchProjection_7.createdFeature() SketchLine_39 = Sketch_4.addLine(-25, -35.00000000000001, -31.24999999999999, -35.00000000000001) SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_37).startPoint(), SketchLine_39.startPoint()) @@ -295,39 +295,39 @@ SketchConstraintRadius_6 = Sketch_4.setRadius(SketchArc_14.results()[1], "r3*coe SketchConstraintDistance_19 = Sketch_4.setDistance(SketchLine_41.endPoint(), SketchLine_40.result(), "epaisseur*coeff") SketchConstraintDistance_20 = Sketch_4.setDistance(SketchLine_41.startPoint(), SketchLine_39.result(), "h2") model.do() -Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_39r-SketchArc_13_2f-SketchLine_40r-SketchLine_41r-SketchLine_42r-SketchArc_14_2r-SketchLine_43r-SketchLine_44f")], model.selection(), 0, "e1*coeff") -Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4")) +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Face-SketchLine_44f-SketchLine_43r-SketchArc_14_2r-SketchLine_42r-SketchLine_41r-SketchLine_40r-SketchArc_13_2f-SketchLine_39r_wire")], model.selection(), 0, "e1*coeff") +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_2/SketchLine_18")) SketchCircle_1 = Sketch_5.addCircle(70, 17.5, 3.125) -SketchLine_45 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_1_1/Modfied_4")) +SketchLine_45 = Sketch_5.addLine(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_2/SketchLine_19][ExtrusionCut_1_1/Modified_Face&Sketch_2/SketchLine_18]")) SketchConstraintDistance_21 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_45.result(), "d9*coeff") -SketchProjection_8 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/Generated_Face_11")) +SketchProjection_8 = Sketch_5.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_13]")) SketchLine_46 = SketchProjection_8.createdFeature() -SketchProjection_9 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_1")) +SketchProjection_9 = Sketch_5.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7]"), False) SketchLine_47 = SketchProjection_9.createdFeature() SketchConstraintDistance_22 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_47.result(), "d1*coeff") SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_1.results()[1], "r_trou") model.do() -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_6"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) -Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_6")) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_2/SketchLine_20"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10")) SketchCircle_2 = Sketch_6.addCircle(70, -17.5, 5) -SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1")) -SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1")) +SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_1_1/To_Face]")) +SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7]"), False) SketchLine_49 = SketchProjection_10.createdFeature() SketchConstraintDistance_23 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_49.result(), "d1*coeff") SketchConstraintDistance_23.setName("SketchConstraintDistance_24") SketchConstraintRadius_8 = Sketch_6.setRadius(SketchCircle_2.results()[1], "r_trou2") -SketchLine_50 = Sketch_6.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_10")) +SketchLine_50 = Sketch_6.addLine(model.selection("EDGE", "Sketch_1/SketchLine_10")) SketchConstraintDistance_24 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_50.result(), "d_trou") SketchConstraintDistance_24.setName("SketchConstraintDistance_25") model.do() -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_16"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_12")) +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6")) SketchLine_51 = Sketch_7.addLine(110, 21.46600893000899, 110, 7.22841614740048) SketchLine_51.setAuxiliary(True) -SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/Generated_Face_11")) +SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_13]")) SketchConstraintCoincidence_65 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result()) SketchConstraintCoincidence_66 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_52.result()) -SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/From_Face_1&Extrusion_1_1/Generated_Face_12")) +SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]")) SketchArc_15 = Sketch_7.addArc(102.5, 7.22841614740048, 110, 7.22841614740048, 104.5, 0, True) SketchConstraintCoincidence_67 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchArc_15.startPoint()) SketchConstraintTangent_29 = Sketch_7.setTangent(SketchLine_51.result(), SketchArc_15.results()[1]) @@ -344,11 +344,11 @@ SketchConstraintLength_5 = Sketch_7.setLength(SketchLine_54.result(), "5.5*coeff SketchLine_56 = Sketch_7.addLine(110, 12.5, 0, 12.5) SketchLine_56.setAuxiliary(True) SketchConstraintCoincidence_73 = Sketch_7.setCoincident(SketchLine_56.startPoint(), SketchLine_52.result()) -SketchLine_57 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_1")) +SketchLine_57 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7]")) SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_57.result()) SketchConstraintMiddle_1 = Sketch_7.setMiddlePoint(SketchLine_56.endPoint(), SketchLine_57.result()) SketchConstraintMiddle_2 = Sketch_7.setMiddlePoint(SketchLine_56.startPoint(), SketchLine_52.result()) -SketchProjection_11 = Sketch_7.addProjection(model.selection("EDGE", "Extrusion_1_1/To_Face_1&ExtrusionCut_4_1/Modfied_2")) +SketchProjection_11 = Sketch_7.addProjection(model.selection("EDGE", "[Extrusion_1_1/To_Face][ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_4]"), False) SketchLine_58 = SketchProjection_11.createdFeature() SketchLine_59 = Sketch_7.addLine(55.00000000000002, 0, 55.00000000000002, 25) SketchLine_59.setAuxiliary(True) @@ -364,7 +364,7 @@ SketchConstraintMirror_2_objects = [SketchArc_15.results()[1], SketchLine_55.res SketchConstraintMirror_2 = Sketch_7.addMirror(SketchLine_59.result(), SketchConstraintMirror_2_objects) [SketchArc_17, SketchLine_63, SketchLine_64, SketchArc_18, SketchLine_65, SketchLine_66] = SketchConstraintMirror_2.mirrored() model.do() -ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2r-SketchLine_61f-SketchLine_62r"), model.selection("FACE", "Sketch_7/Face-SketchArc_18_2r-SketchLine_65f-SketchLine_66r"), model.selection("FACE", "Sketch_7/Face-SketchArc_17_2r-SketchLine_64r-SketchLine_66r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_15_2r-SketchLine_54f-SketchLine_55r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_10"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) +ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Face-SketchLine_61f-SketchLine_62r-SketchArc_16_2r_wire"), model.selection("FACE", "Sketch_7/Face-SketchLine_65f-SketchLine_66r-SketchArc_18_2r"), model.selection("FACE", "Sketch_7/Face-SketchLine_63f-SketchLine_64r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_7/Face-SketchLine_54f-SketchLine_55r-SketchArc_15_2r_wire")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_12"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_5_1")], [model.selection("SOLID", "Extrusion_3_1"), model.selection("SOLID", "ExtrusionCut_3_1")]) model.do() diff --git a/test.models/piece_12.py b/test.models/piece_12.py index 05c3b5107..d1adc75e5 100644 --- a/test.models/piece_12.py +++ b/test.models/piece_12.py @@ -106,13 +106,13 @@ SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10") SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_3.result()) SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11") SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_2.results()[1]) -SketchArc_3 = Sketch_1.addArc(9.077705920073647e-31, -3.860574861749558e-31, 15.46247221747307, -11.0413745939477, 18.89444362769119, -2, False) +SketchArc_3 = Sketch_1.addArc(0, 0, 15.46247221747307, -11.0413745939477, 18.89444362769119, -2, False) SketchArc_3.setName("SketchArc_7") SketchArc_3.result().setName("SketchArc_7") SketchArc_3.results()[1].setName("SketchArc_7_2") SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchArc_3.center()) SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_54") -SketchArc_4 = Sketch_1.addArc(3.497294868556922e-32, 3.186289860391258e-33, 18.89444362769119, 2, 15.46247221747308, 11.04137459394768, False) +SketchArc_4 = Sketch_1.addArc(0, 0, 18.89444362769119, 2, 15.46247221747308, 11.04137459394768, False) SketchArc_4.setName("SketchArc_8") SketchArc_4.result().setName("SketchArc_8") SketchArc_4.results()[1].setName("SketchArc_8_2") @@ -134,7 +134,7 @@ SketchArc_6.results()[1].setName("SketchArc_10_2") SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchArc_6.startPoint()) SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_57") SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchArc_6.results()[1]) -SketchLine_4 = Sketch_1.addLine(17.5, 15, 37.99999999999999, 15) +SketchLine_4 = Sketch_1.addLine(17.5, 15, 38, 15) SketchLine_4.setName("SketchLine_42") SketchLine_4.result().setName("SketchLine_42") SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_4.startPoint()) @@ -149,7 +149,7 @@ SketchLine_6.setName("SketchLine_45") SketchLine_6.result().setName("SketchLine_45") SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchLine_6.startPoint()) SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_61") -SketchLine_7 = Sketch_1.addLine(37.99999999999999, 15, 38.00000000000001, 5.505556372308819) +SketchLine_7 = Sketch_1.addLine(38, 15, 38, 5.505556372308819) SketchLine_7.setName("SketchLine_46") SketchLine_7.result().setName("SketchLine_46") SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_7.startPoint()) @@ -166,7 +166,7 @@ SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_5.result()) SketchConstraintHorizontal_5.setName("SketchConstraintHorizontal_14") SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_7.result()) SketchConstraintVertical_1.setName("SketchConstraintVertical_7") -SketchLine_8 = Sketch_1.addLine(40, 17, 40, -17.00000000000001) +SketchLine_8 = Sketch_1.addLine(40, 17, 40, -17) SketchLine_8.setName("SketchLine_47") SketchLine_8.result().setName("SketchLine_47") SketchLine_8.setAuxiliary(True) @@ -193,7 +193,7 @@ SketchConstraintRadius_6 = Sketch_1.setRadius(SketchArc_4.results()[1], "(r4+4)* SketchConstraintRadius_6.setName("SketchConstraintRadius_13") SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_4.endPoint(), SketchLine_8.result(), "2*coeff") SketchConstraintDistance_6.setName("SketchConstraintDistance_19") -SketchArc_7 = Sketch_1.addArc(40, 2.220450266386716e-15, 34.49444362769118, 2, 38.00000000000001, 5.505556372308819, True) +SketchArc_7 = Sketch_1.addArc(40, 0, 34.49444362769118, 2, 38, 5.505556372308819, True) SketchArc_7.setName("SketchArc_11") SketchArc_7.result().setName("SketchArc_11") SketchArc_7.results()[1].setName("SketchArc_11_2") @@ -201,7 +201,7 @@ SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchPoint_2.coordinate SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_66") SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchArc_7.startPoint()) SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_67") -SketchArc_8 = Sketch_1.addArc(40.00000000000001, -2.652239435709897e-15, 34.49444362769118, -2, 37.95784774655168, -5.490060577298436, False) +SketchArc_8 = Sketch_1.addArc(40, 0, 34.49444362769118, -2, 37.95784774655168, -5.490060577298436, False) SketchArc_8.setName("SketchArc_12") SketchArc_8.result().setName("SketchArc_12") SketchArc_8.results()[1].setName("SketchArc_12_2") @@ -241,12 +241,12 @@ SketchConstraintRadius_8 = Sketch_1.setRadius(SketchArc_9.results()[1], "(2.5+2) SketchConstraintRadius_8.setName("SketchConstraintRadius_15") SketchConstraintDistance_8 = Sketch_1.setDistance(SketchCircle_5.center(), SketchLine_2.result(), "4*coeff") SketchConstraintDistance_8.setName("SketchConstraintDistance_22") -SketchLine_10 = Sketch_1.addLine(17.5, -15, 34.00000000000001, -15) +SketchLine_10 = Sketch_1.addLine(17.5, -15, 34, -15) SketchLine_10.setName("SketchLine_43") SketchLine_10.result().setName("SketchLine_43") SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_10.startPoint()) SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_73") -SketchArc_10 = Sketch_1.addArc(34.00000000000001, -13.48076923076937, 34.00000000000001, -15, 35.51437699680511, -13.35942492012782, False) +SketchArc_10 = Sketch_1.addArc(34, -13.48076923076937, 34, -15, 35.51437699680511, -13.35942492012782, False) SketchArc_10.setName("SketchArc_14") SketchArc_10.result().setName("SketchArc_14") SketchArc_10.results()[1].setName("SketchArc_14_2") @@ -320,14 +320,14 @@ SketchArc_11.results()[1].setName("SketchArc_15_2") SketchLine_12.setName("SketchLine_50") SketchLine_12.result().setName("SketchLine_50") model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_4_2f-SketchLine_6r-SketchLine_10f-SketchArc_2_2f")], model.selection(), "h_p*coeff", 0) -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1")) -SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchCircle_2_2")) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_4_2f-SketchLine_10f-SketchArc_2_2f-SketchLine_6r-SketchArc_8_2f-SketchArc_9_2r-SketchLine_42f-SketchLine_46f-SketchArc_11_2f-SketchLine_45r-SketchArc_15_2r-SketchArc_16_2f-SketchLine_51f-SketchArc_17_2f-SketchLine_52r-SketchLine_50r-SketchCircle_11_2r-SketchArc_22_2f-SketchArc_21_2r-SketchLine_55f-SketchArc_20_2r-SketchArc_19_2f-SketchLine_54r-SketchArc_18_2f-SketchLine_53r-SketchArc_7_2f-SketchLine_44f-SketchArc_12_2f-SketchLine_48f-SketchArc_13_2f-SketchArc_14_2r-SketchLine_43r-SketchArc_10_2r-SketchCircle_1_2r-SketchCircle_2_2r_wire")], model.selection(), "h_p*coeff", 0) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face")) +SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchCircle_2_2")) SketchCircle_6 = SketchProjection_1.createdFeature() SketchCircle_6.setName("SketchCircle_5") SketchCircle_6.result().setName("SketchCircle_5") SketchCircle_6.results()[1].setName("SketchCircle_5_2") -SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchCircle_4_2")) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchCircle_4_2")) SketchCircle_7 = SketchProjection_2.createdFeature() SketchCircle_7.setName("SketchCircle_6") SketchCircle_7.result().setName("SketchCircle_6") @@ -342,18 +342,18 @@ SketchConstraintRadius_9 = Sketch_2.setRadius(SketchCircle_8.results()[1], "r2*c SketchConstraintRadius_9.setName("SketchConstraintRadius_6") model.do() Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), "10*coeff", 0) -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_3_2f")], model.selection(), "p_trou1*coeff", 0, [model.selection("SOLID", "Extrusion_1_1")]) -ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_1_2r")], model.selection(), "p2_trou1*coeff", 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchCircle_3_2f_wire")], model.selection(), "p_trou1*coeff", 0, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_4_2f-SketchLine_10f-SketchArc_2_2f-SketchLine_6r-SketchArc_8_2f-SketchArc_9_2r-SketchLine_42f-SketchLine_46f-SketchArc_11_2f-SketchLine_45r-SketchArc_15_2r-SketchArc_16_2f-SketchLine_51f-SketchArc_17_2f-SketchLine_52r-SketchLine_50r-SketchCircle_11_2r-SketchArc_22_2f-SketchArc_21_2r-SketchLine_55f-SketchArc_20_2r-SketchArc_19_2f-SketchLine_54r-SketchArc_18_2f-SketchLine_53r-SketchArc_7_2f-SketchLine_44f-SketchArc_12_2f-SketchLine_48f-SketchArc_13_2f-SketchArc_14_2r-SketchLine_43r-SketchArc_10_2r-SketchCircle_1_2r-SketchCircle_2_2r_wire_7")], model.selection(), "p2_trou1*coeff", 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_4_2f")], model.selection(), "p_trou2*coeff", 0, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_2_1")]) -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_2_2r")], model.selection(), "p2_trou*coeff", 0, [model.selection("SOLID", "ExtrusionCut_3_2")]) +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_4_2f-SketchLine_10f-SketchArc_2_2f-SketchLine_6r-SketchArc_8_2f-SketchArc_9_2r-SketchLine_42f-SketchLine_46f-SketchArc_11_2f-SketchLine_45r-SketchArc_15_2r-SketchArc_16_2f-SketchLine_51f-SketchArc_17_2f-SketchLine_52r-SketchLine_50r-SketchCircle_11_2r-SketchArc_22_2f-SketchArc_21_2r-SketchLine_55f-SketchArc_20_2r-SketchArc_19_2f-SketchLine_54r-SketchArc_18_2f-SketchLine_53r-SketchArc_7_2f-SketchLine_44f-SketchArc_12_2f-SketchLine_48f-SketchArc_13_2f-SketchArc_14_2r-SketchLine_43r-SketchArc_10_2r-SketchCircle_1_2r-SketchCircle_2_2r_wire_8")], model.selection(), "p2_trou*coeff", 0, [model.selection("SOLID", "ExtrusionCut_3_2")]) Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "22.5*coeff", False) Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "45*coeff", True) Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2")) -SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1")) +SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"), False) SketchLine_18 = SketchProjection_3.createdFeature() SketchLine_18.setName("SketchLine_4") SketchLine_18.result().setName("SketchLine_4") -SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_6")) +SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_6")) SketchLine_19 = SketchProjection_4.createdFeature() SketchLine_19.setName("SketchLine_5") SketchLine_19.result().setName("SketchLine_5") @@ -430,9 +430,9 @@ SketchConstraintDistance_13.setName("SketchConstraintDistance_11") SketchConstraintDistance_14 = Sketch_3.setDistance(SketchLine_23.result(), SketchLine_25.startPoint(), "2.5*coeff") SketchConstraintDistance_14.setName("SketchConstraintDistance_12") model.do() -Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0) +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchLine_14r-SketchLine_27r-SketchLine_26r-SketchLine_28r-SketchLine_12r-SketchLine_9r-SketchCircle_8_2r_wire")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10"), 0, model.selection(), 0) Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "ExtrusionCut_4_1")]) -ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "Smash_1_1_1")]) +ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchCircle_8_2f_wire")], model.selection(), 10, 0, [model.selection("SOLID", "Smash_1_1_1")]) ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_5_1_1")]) Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OY")) @@ -516,11 +516,11 @@ SketchConstraintDistance_16.setName("SketchConstraintDistance_10") SketchConstraintLength_10 = Sketch_4.setLength(SketchLine_36.result(), 12.975642079145) SketchConstraintLength_10.setName("SketchConstraintLength_7") model.do() -Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0) +Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchCircle_9_2r_wire")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6"), 0, model.selection(), 0) Smash_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1")], [model.selection("COMPSOLID", "ExtrusionCut_6_1")]) ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Smash_2_1_3")]) ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_7_1_1")]) -Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Smash_2_1_3/Modified_Face_1")) +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Smash_2_1_3/Modified_Face&Extrusion_1_1/From_Face")) SketchPoint_3 = Sketch_5.addPoint(model.selection("VERTEX", "PartSet/Origin")) SketchPoint_3.setName("SketchPoint_2") SketchPoint_3.result().setName("SketchPoint_2") @@ -539,7 +539,7 @@ SketchLine_39.setName("SketchLine_31") SketchLine_39.result().setName("SketchLine_31") SketchConstraintDistance_17 = Sketch_5.setDistance(SketchLine_37.result(), SketchLine_38.startPoint(), "epaisseur*coeff") SketchConstraintDistance_17.setName("SketchConstraintDistance_13") -SketchArc_19 = Sketch_5.addArc(2.175718373563154e-31, -6.039735315912772e-31, -13.96424004376904, 17, -13.964240043769, -17, False) +SketchArc_19 = Sketch_5.addArc(0, 0, -13.964240043769, 17, -13.964240043769, -17, False) SketchArc_19.setName("SketchArc_5") SketchArc_19.result().setName("SketchArc_5") SketchArc_19.results()[1].setName("SketchArc_5_2") @@ -567,7 +567,7 @@ SketchConstraintDistance_19.setName("SketchConstraintDistance_15") SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchArc_19.endPoint(), SketchLine_37.startPoint()) SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_40") model.do() -Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchLine_29r-SketchLine_30r-SketchArc_5_2r-SketchLine_32r")], model.selection(), 0, "22*coeff") +Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_5_2r-SketchLine_30r-SketchLine_32r-SketchLine_29r")], model.selection(), 0, "22*coeff") Sketch_6_origin = GeomAPI_Pnt(0, 0, 0) Sketch_6_norm = GeomAPI_Dir(0, 1, 0) Sketch_6_dirx = GeomAPI_Dir(1, 0, 0) @@ -575,23 +575,23 @@ Sketch_6 = model.addSketch(Part_1_doc, GeomAPI_Ax3(Sketch_6_origin, Sketch_6_dir SketchLine_41 = Sketch_6.addLine(-32, -17, -32, 17) SketchLine_41.setName("SketchLine_33") SketchLine_41.result().setName("SketchLine_33") -SketchPoint_4 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_32s-SketchLine_29e")) +SketchPoint_4 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/SketchLine_29_EndVertex")) SketchPoint_4.setName("SketchPoint_3") SketchPoint_4.result().setName("SketchPoint_3") SketchConstraintCoincidence_60 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchPoint_4.result()) SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_41") -SketchPoint_5 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_30s-SketchLine_32e")) +SketchPoint_5 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/SketchLine_30_StartVertex")) SketchPoint_5.setName("SketchPoint_4") SketchPoint_5.result().setName("SketchPoint_4") SketchConstraintCoincidence_61 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchPoint_5.result()) SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_42") -SketchPoint_6 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchPoint_2-SketchArc_5-SketchLine_31s")) +SketchPoint_6 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/SketchPoint_2")) SketchPoint_6.setName("SketchPoint_5") SketchPoint_6.result().setName("SketchPoint_5") -SketchLine_42 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_30")) +SketchLine_42 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/SketchLine_30")) SketchLine_42.setName("SketchLine_34") SketchLine_42.result().setName("SketchLine_34") -SketchLine_43 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_29")) +SketchLine_43 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/SketchLine_29")) SketchLine_43.setName("SketchLine_35") SketchLine_43.result().setName("SketchLine_35") SketchArc_20 = Sketch_6.addArc(0, 0, -20.32855135026245, 17, -20.32855135026245, -17, False) @@ -621,18 +621,18 @@ SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_49") SketchConstraintRadius_13 = Sketch_6.setRadius(SketchArc_20.results()[1], "r1*coeff") SketchConstraintRadius_13.setName("SketchConstraintRadius_10") model.do() -Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_33r-SketchArc_6_2r-SketchLine_36r-SketchLine_37f")], model.selection(), "77*coeff-h_p*coeff", 0) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face_1")) +Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_36r-SketchArc_6_2r-SketchLine_37f-SketchLine_33r")], model.selection(), "77*coeff-h_p*coeff", 0) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face&Sketch_6/SketchLine_33")) SketchLine_46 = Sketch_7.addLine(37, -8.881784197001252e-16, -22, 1.665334536937735e-15) SketchLine_46.setName("SketchLine_38") SketchLine_46.result().setName("SketchLine_38") SketchLine_46.setAuxiliary(True) -SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_1&Extrusion_6_1/To_Face_1")) +SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_6_1/Generated_Face&Sketch_6/SketchLine_33][Extrusion_6_1/To_Face]")) SketchLine_47.setName("SketchLine_39") SketchLine_47.result().setName("SketchLine_39") SketchConstraintCoincidence_69 = Sketch_7.setCoincident(SketchLine_46.startPoint(), SketchLine_47.result()) SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_50") -SketchLine_48 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_2&Extrusion_5_1/From_Face_1")) +SketchLine_48 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_32][Extrusion_5_1/From_Face]")) SketchLine_48.setName("SketchLine_40") SketchLine_48.result().setName("SketchLine_40") SketchConstraintCoincidence_70 = Sketch_7.setCoincident(SketchLine_46.endPoint(), SketchLine_48.result()) @@ -661,24 +661,25 @@ SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_53") SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_11.results()[1], "r3") SketchConstraintRadius_14.setName("SketchConstraintRadius_12") model.do() -ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")]) -ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_7_2r-SketchArc_10_2f-SketchLine_44r-SketchArc_12_2r-SketchArc_13_2r-SketchLine_48r-SketchLine_43f-SketchArc_14_2f"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_50f-SketchArc_15_2f-SketchArc_16_2r-SketchLine_51r-SketchArc_17_2r-SketchLine_52f"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchArc_8_2r-SketchArc_9_2f-SketchLine_42r-SketchLine_45f-SketchLine_46r-SketchArc_11_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modfied_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")]) -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_1")) +ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Face-SketchCircle_10_2f_wire")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")]) +ExtrusionCut_10_objects_1 = [model.selection("WIRE", "Sketch_1/Face-SketchArc_10_2f-SketchLine_43f-SketchArc_14_2f-SketchArc_13_2r-SketchLine_48r-SketchArc_12_2r-SketchLine_44r-SketchArc_7_2r_wire"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Face-SketchLine_50f-SketchLine_52f-SketchArc_17_2r-SketchLine_51r-SketchArc_16_2r-SketchArc_15_2f_wire"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchLine_45f-SketchArc_11_2r-SketchLine_46r-SketchLine_42r-SketchArc_9_2f-SketchArc_8_2r")] +ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_10_objects_1, model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modified_Face&Extrusion_1_1/To_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")]) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modified_Face&Sketch_6/SketchLine_33")) SketchLine_50 = Sketch_8.addLine(37, 14.80042035331162, 37, -14) SketchLine_50.setName("SketchLine_56") SketchLine_50.result().setName("SketchLine_56") SketchLine_50.setAuxiliary(True) -SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_9_1/Modfied_1&Extrusion_6_1/To_Face_1")) +SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "[ExtrusionCut_9_1/Modified_Face&Sketch_6/SketchLine_33][Extrusion_6_1/To_Face]")) SketchLine_51.setName("SketchLine_57") SketchLine_51.result().setName("SketchLine_57") SketchConstraintCoincidence_73 = Sketch_8.setCoincident(SketchLine_50.startPoint(), SketchLine_51.result()) SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_81") SketchConstraintCoincidence_74 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_51.result()) SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_82") -SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_4&ExtrusionCut_9_1/Modfied_1")) +SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "[Extrusion_6_1/Generated_Face&Sketch_6/SketchLine_36][ExtrusionCut_9_1/Modified_Face&Sketch_6/SketchLine_33]")) SketchLine_52.setName("SketchLine_58") SketchLine_52.result().setName("SketchLine_58") -SketchArc_21 = Sketch_8.addArc(34, -14, 37, -14, 34.00000001126211, -17, True) +SketchArc_21 = Sketch_8.addArc(34, -14, 37, -14, 33.9999999583228, -17, True) SketchArc_21.setName("SketchArc_23") SketchArc_21.result().setName("SketchArc_23") SketchArc_21.results()[1].setName("SketchArc_23_2") @@ -688,7 +689,7 @@ SketchConstraintTangent_6 = Sketch_8.setTangent(SketchLine_50.result(), SketchAr SketchConstraintCoincidence_76 = Sketch_8.setCoincident(SketchLine_52.result(), SketchArc_21.endPoint()) SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_84") SketchConstraintTangent_7 = Sketch_8.setTangent(SketchArc_21.results()[1], SketchLine_52.result()) -SketchLine_53 = Sketch_8.addLine(34.00000002238511, -17, 37, -17) +SketchLine_53 = Sketch_8.addLine(34, -17, 37, -17) SketchLine_53.setName("SketchLine_59") SketchLine_53.result().setName("SketchLine_59") SketchConstraintCoincidence_77 = Sketch_8.setCoincident(SketchArc_21.endPoint(), SketchLine_53.startPoint()) @@ -704,7 +705,7 @@ SketchConstraintCoincidence_80 = Sketch_8.setCoincident(SketchLine_51.startPoint SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_88") SketchConstraintRadius_15 = Sketch_8.setRadius(SketchArc_21.results()[1], "3*coeff") SketchConstraintRadius_15.setName("SketchConstraintRadius_16") -SketchLine_55 = Sketch_8.addLine(model.selection("EDGE", "Sketch_7/Edge-SketchLine_38")) +SketchLine_55 = Sketch_8.addLine(model.selection("EDGE", "Sketch_7/SketchLine_38")) SketchLine_55.setName("SketchLine_61") SketchLine_55.result().setName("SketchLine_61") SketchConstraintMirror_2_objects = [SketchArc_21.results()[1], SketchLine_54.result(), SketchLine_53.result()] @@ -718,20 +719,20 @@ SketchArc_22.setName("SketchArc_24") SketchArc_22.result().setName("SketchArc_24") SketchArc_22.results()[1].setName("SketchArc_24_2") model.do() -ExtrusionCut_11 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchArc_23_2r-SketchLine_59f-SketchLine_60r"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_24_2r-SketchLine_62f-SketchLine_63r")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "ExtrusionCut_9_1")]) -Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face_1")) +ExtrusionCut_11 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_59f-SketchLine_60r-SketchArc_23_2r"), model.selection("WIRE", "Sketch_8/Face-SketchLine_62f-SketchLine_63r-SketchArc_24_2r_wire")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "ExtrusionCut_9_1")]) +Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_29")) SketchLine_58 = Sketch_9.addLine(-32, -19, -32, -3.575047476349699) SketchLine_58.setName("SketchLine_64") SketchLine_58.result().setName("SketchLine_64") SketchLine_58.setAuxiliary(True) -SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_1&Extrusion_5_1/Generated_Face_2")) +SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "[Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_32][Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_29]")) SketchLine_59.setName("SketchLine_65") SketchLine_59.result().setName("SketchLine_65") SketchConstraintCoincidence_81 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result()) SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_89") SketchConstraintCoincidence_82 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchLine_59.result()) SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_90") -SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_1&Extrusion_5_1/From_Face_1")) +SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "[Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_29][Extrusion_5_1/From_Face]")) SketchLine_60.setName("SketchLine_66") SketchLine_60.result().setName("SketchLine_66") SketchArc_23 = Sketch_9.addArc(-29, -19, -32, -19, -29.00002201340376, -22, False) @@ -761,7 +762,7 @@ SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_96") SketchConstraintRadius_16 = Sketch_9.setRadius(SketchArc_23.results()[1], "3*coeff") SketchConstraintRadius_16.setName("SketchConstraintRadius_17") model.do() -ExtrusionCut_12 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchArc_25_2r-SketchLine_67f-SketchLine_68f")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "Extrusion_5_1")]) +ExtrusionCut_12 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_67f-SketchLine_68f-SketchArc_25_2r")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "Extrusion_5_1")]) model.do() from GeomAPI import GeomAPI_Shape @@ -777,7 +778,7 @@ model.testResultsVolumes(Part_1, [118190.673218984]) # checking for parametric update Parameter_Epaisseur.setValue(33.9) model.do() -model.testResultsVolumes(Part_1, [118105.9369682]) +model.testResultsVolumes(Part_1, [122133.938213185]) Parameter_Epaisseur.setValue(34) model.do() model.testResultsVolumes(Part_1, [118190.673218984]) diff --git a/test.models/plug.py b/test.models/plug.py index 37ce6db8b..869bf4d9d 100644 --- a/test.models/plug.py +++ b/test.models/plug.py @@ -191,12 +191,12 @@ model.testNbSubShapes(Revolution_1, GeomAPI_Shape.EDGE, [114]) model.testNbSubShapes(Revolution_1, GeomAPI_Shape.VERTEX, [228]) model.testResultsVolumes(Revolution_1, [29055.346994571114919381216168404]) -Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "PartSet/OY"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), True) +Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "PartSet/OY"), model.selection("VERTEX", "Sketch_1/SketchPoint_2"), True) Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) -SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), False) +SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchPoint_2"), False) SketchPoint_3 = SketchProjection_3.createdFeature() -SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_28"), False) +SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7][weak_name_2]"), False) SketchLine_36 = SketchProjection_4.createdFeature() SketchCircle_1 = Sketch_2.addCircle(14.5, 0, 2.25) SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchPoint_3.result(), SketchCircle_1.center()) @@ -215,7 +215,7 @@ model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.EDGE, [132]) model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.VERTEX, [264]) model.testResultsVolumes(ExtrusionCut_1, [28943.115000463178148493170738220]) -Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Generated_Face_14&Revolution_1_1/Generated_Face_15")], "Fillet1") +Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_21][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_20]")], "Fillet1") # check Fillet_1 model.testNbResults(Fillet_1, 1) model.testNbSubResults(Fillet_1, [0]) @@ -225,7 +225,7 @@ model.testNbSubShapes(Fillet_1, GeomAPI_Shape.EDGE, [136]) model.testNbSubShapes(Fillet_1, GeomAPI_Shape.VERTEX, [272]) model.testResultsVolumes(Fillet_1, [28340.280766451105591841042041779]) -Fillet_2 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face_4"), model.selection("FACE", "Revolution_1_1/Generated_Face_6"), model.selection("FACE", "Revolution_1_1/Generated_Face_8"), model.selection("FACE", "Revolution_1_1/Generated_Face_10")], "Fillet2") +Fillet_2 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_31"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_29"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_27"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_25")], "Fillet2") # check Fillet_2 model.testNbResults(Fillet_2, 1) model.testNbSubResults(Fillet_2, [0]) @@ -235,7 +235,7 @@ model.testNbSubShapes(Fillet_2, GeomAPI_Shape.EDGE, [168]) model.testNbSubShapes(Fillet_2, GeomAPI_Shape.VERTEX, [336]) model.testResultsVolumes(Fillet_2, [28339.715350479829794494435191154]) -Fillet_3 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face_16")], "Fillet3") +Fillet_3 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_19")], "Fillet3") # check Fillet_3 model.testNbResults(Fillet_3, 1) model.testNbSubResults(Fillet_3, [0]) @@ -245,7 +245,7 @@ model.testNbSubShapes(Fillet_3, GeomAPI_Shape.EDGE, [176]) model.testNbSubShapes(Fillet_3, GeomAPI_Shape.VERTEX, [352]) model.testResultsVolumes(Fillet_3, [28338.609830057110229972749948502]) -Fillet_4 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face_24")], "Fillet3") +Fillet_4 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_11")], "Fillet3") # check Fillet_4 model.testNbResults(Fillet_4, 1) model.testNbSubResults(Fillet_4, [0]) @@ -255,7 +255,7 @@ model.testNbSubShapes(Fillet_4, GeomAPI_Shape.EDGE, [184]) model.testNbSubShapes(Fillet_4, GeomAPI_Shape.VERTEX, [368]) model.testResultsVolumes(Fillet_4, [28347.280717884430487174540758133]) -Fillet_5 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face_26")], "Fillet2") +Fillet_5 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_9")], "Fillet2") # check Fillet_5 model.testNbResults(Fillet_5, 1) model.testNbSubResults(Fillet_5, [0]) @@ -281,17 +281,17 @@ SketchConstraintCoincidence_43 = Sketch_3.setCoincident(SketchLine_41.endPoint() SketchConstraintCoincidence_44 = Sketch_3.setCoincident(SketchLine_42.endPoint(), SketchLine_37.startPoint()) SketchProjection_5 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False) SketchLine_43 = SketchProjection_5.createdFeature() -SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_33"), False) +SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_33"), False) SketchLine_44 = SketchProjection_6.createdFeature() -SketchProjection_7 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_33"), False) +SketchProjection_7 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_33"), False) SketchLine_45 = SketchProjection_7.createdFeature() -SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_33"), False) +SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_33"), False) SketchLine_46 = SketchProjection_8.createdFeature() -SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_32"), False) +SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_32"), False) SketchLine_47 = SketchProjection_9.createdFeature() -SketchProjection_10 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_32"), False) +SketchProjection_10 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_32"), False) SketchLine_48 = SketchProjection_10.createdFeature() -SketchProjection_11 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_32"), False) +SketchProjection_11 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_32"), False) SketchLine_49 = SketchProjection_11.createdFeature() SketchConstraintVertical_13 = Sketch_3.setVertical(SketchLine_37.result()) SketchConstraintVertical_14 = Sketch_3.setVertical(SketchLine_39.result()) @@ -347,11 +347,11 @@ SketchConstraintVertical_15 = Sketch_4.setVertical(SketchLine_52.result()) SketchConstraintVertical_16 = Sketch_4.setVertical(SketchLine_55.result()) SketchConstraintVertical_17 = Sketch_4.setVertical(SketchLine_58.result()) SketchConstraintHorizontal_11 = Sketch_4.setHorizontal(SketchLine_56.result()) -SketchProjection_13 = Sketch_4.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_24s-SketchLine_23e"), False) +SketchProjection_13 = Sketch_4.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_23_EndVertex"), False) SketchPoint_4 = SketchProjection_13.createdFeature() SketchConstraintDistanceHorizontal_17 = Sketch_4.setHorizontalDistance(SketchAPI_Point(SketchPoint_4).coordinates(), SketchLine_52.endPoint(), "Drill2_Loc") SketchConstraintDistanceHorizontal_18 = Sketch_4.setHorizontalDistance(SketchLine_54.startPoint(), SketchLine_54.endPoint(), "Drill2_InnerRadius") -SketchProjection_14 = Sketch_4.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_20"), False) +SketchProjection_14 = Sketch_4.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_20"), False) SketchLine_59 = SketchProjection_14.createdFeature() SketchConstraintAngle_6 = Sketch_4.setAngle(SketchLine_57.result(), SketchLine_56.result(), 45) SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_53.result(), [SketchLine_59.result()]) @@ -370,7 +370,7 @@ model.do() # check Sketch_4 model.checkSketch(Sketch_4, 0) -RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_52r-SketchLine_54r-SketchLine_55r-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchArc_2_2f")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_52"), 360, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchArc_2_2f-SketchLine_55r-SketchLine_54r-SketchLine_52r")], model.selection("EDGE", "Sketch_4/SketchLine_52"), 360, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) # check RevolutionCut_1 model.testNbResults(RevolutionCut_1, 1) model.testNbSubResults(RevolutionCut_1, [0]) @@ -384,7 +384,7 @@ RevolutionCut_2 = model.addRevolutionCut(Part_1_doc, [], model.selection("EDGE", Sketch_5 = model.addSketch(Part_1_doc, model.standardPlane("XOY")) SketchLine_61 = Sketch_5.addLine(63.5, 10.5, 64, 10.5) SketchLine_61.setAuxiliary(True) -SketchProjection_15 = Sketch_5.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_7"), False) +SketchProjection_15 = Sketch_5.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_7"), False) SketchLine_62 = SketchProjection_15.createdFeature() SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_61.startPoint(), SketchLine_62.result()) SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchAPI_Line(SketchLine_62).endPoint(), SketchLine_61.endPoint()) @@ -437,7 +437,7 @@ model.testNbSubShapes(Result, GeomAPI_Shape.EDGE, [366]) model.testNbSubShapes(Result, GeomAPI_Shape.VERTEX, [732]) model.testResultsVolumes(Result, [14144.443128843522572424262762070]) -Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Plug/Modified_Face_27_1"), model.selection("FACE", "Plug/Modified_Face_26_1"), model.selection("FACE", "Plug/Modified_Face_28_1"), model.selection("FACE", "Plug/Modified_Face_32_1")]) +Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "(Plug/Modified_Face&Sketch_1/SketchLine_4)(Plug/Modified_Face&Sketch_1/SketchLine_28)(Plug/Modified_Face&Sketch_1/SketchLine_3)(Plug/Modified_Face&Sketch_1/SketchLine_29)(Plug/Modified_Face&Sketch_1/SketchLine_30)(Plug/Modified_Face&Sketch_1/SketchLine_31)(Plug/Modified_Face&Sketch_1/SketchLine_33)(Plug/Modified_Face&Sketch_1/SketchLine_34)(Plug/Modified_Face&Sketch_1/SketchLine_1)(Plug/Modified_Face&Sketch_1/SketchLine_2)(Plug/Modified_Face&Sketch_1/SketchLine_32)"), model.selection("FACE", "(Plug/Modified_Face&Sketch_1/SketchLine_10)(Plug/Modified_Face&Sketch_1/SketchLine_9)(Plug/Modified_Face&Sketch_1/SketchArc_1_2)(Plug/Modified_Face&Sketch_1/SketchLine_7)(Plug/Modified_Face&Sketch_1/SketchLine_8)(Plug/Modified_Face&Sketch_1/SketchLine_11)(Plug/Modified_Face&Sketch_1/SketchLine_12)(Plug/Modified_Face&Sketch_1/SketchLine_13)(Plug/Modified_Face&Sketch_1/SketchLine_14)(Plug/Modified_Face&Sketch_1/SketchLine_15)(Plug/Modified_Face&Sketch_1/SketchLine_16)(Plug/Modified_Face&Sketch_1/SketchLine_17)(Plug/Modified_Face&Sketch_1/SketchLine_18)(Plug/Modified_Face&Sketch_1/SketchLine_19)(Plug/Modified_Face&Sketch_1/SketchLine_20)(Plug/Modified_Face&Sketch_1/SketchLine_6)(Plug/Modified_Face&Sketch_1/SketchLine_5)(Plug/Modified_Face&Sketch_1/SketchLine_4)(Plug/Modified_Face&Sketch_1/SketchLine_28)(Plug/Modified_Face&Sketch_1/SketchLine_27)(Plug/Modified_Face&Sketch_1/SketchLine_26)(Plug/Modified_Face&Sketch_1/SketchLine_25)(Plug/Modified_Face&Sketch_1/SketchLine_24)(Plug/Modified_Face&Sketch_1/SketchLine_23)(Plug/Modified_Face&Sketch_1/SketchLine_22)(Plug/Modified_Face&Sketch_1/SketchLine_21)"), model.selection("FACE", "(Plug/Modified_Face&Sketch_1/SketchArc_1_2)(Plug/Modified_Face&Sketch_4/SketchLine_58)(Plug/Modified_Face&Sketch_4/SketchArc_2_2)(Plug/Modified_Face&Sketch_1/SketchLine_6)(Plug/Modified_Face&Sketch_1/SketchLine_5)(Plug/Modified_Face&Sketch_1/SketchLine_4)(Plug/Modified_Face&Sketch_1/SketchLine_28)(Plug/Modified_Face&Sketch_1/SketchLine_27)(Plug/Modified_Face&Sketch_1/SketchLine_26)(Plug/Modified_Face&Sketch_1/SketchLine_25)(Plug/Modified_Face&Sketch_1/SketchLine_24)(Plug/Modified_Face&Sketch_1/SketchLine_23)(Plug/Modified_Face&Sketch_1/SketchLine_22)(Plug/Modified_Face&Sketch_1/SketchLine_21)(Plug/Modified_Face&Sketch_1/SketchLine_3)(Plug/Modified_Face&Sketch_1/SketchLine_29)(Plug/Modified_Face&Sketch_1/SketchLine_30)(Plug/Modified_Face&Sketch_1/SketchLine_31)(Plug/Modified_Face&Sketch_1/SketchLine_33)(Plug/Modified_Face&Sketch_1/SketchLine_34)(Plug/Modified_Face&Sketch_1/SketchLine_1)(Plug/Modified_Face&Sketch_1/SketchLine_2)"), model.selection("FACE", "(Plug/Modified_Face&Sketch_1/SketchLine_10)(Plug/Modified_Face&Sketch_1/SketchLine_9)(Plug/Modified_Face&Sketch_1/SketchArc_1_2)(Plug/Modified_Face&Sketch_1/SketchLine_7)(Plug/Modified_Face&Sketch_1/SketchLine_8)(Plug/Modified_Face&Sketch_1/SketchLine_11)(Plug/Modified_Face&Sketch_1/SketchLine_12)(Plug/Modified_Face&Sketch_1/SketchLine_13)(Plug/Modified_Face&Sketch_1/SketchLine_14)(Plug/Modified_Face&Sketch_1/SketchLine_15)(Plug/Modified_Face&Sketch_1/SketchLine_16)(Plug/Modified_Face&Sketch_1/SketchLine_17)(Plug/Modified_Face&Sketch_1/SketchLine_18)(Plug/Modified_Face&Sketch_1/SketchLine_19)(Plug/Modified_Face&Sketch_1/SketchLine_20)(Plug/Modified_Face&Sketch_4/SketchLine_58)(Plug/Modified_Face&Sketch_4/SketchArc_2_2)")]) Group_1.result().setColor(68, 68, 68) # check Group_1 model.checkGroup(Group_1, GeomAPI_Shape.FACE) diff --git a/test.models/sprocket.py b/test.models/sprocket.py index 30c174ab2..a5a013a7d 100644 --- a/test.models/sprocket.py +++ b/test.models/sprocket.py @@ -114,7 +114,7 @@ model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.EDGE, [1080]) model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.VERTEX, [2160]) model.testResultsVolumes(Extrusion_1, [10398.453966298400700907222926617]) -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1")) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face")) SketchCircle_3 = Sketch_2.addCircle(0, 0, 4.5) SketchLine_125 = Sketch_2.addLine(0, 0, -24.375, 0) SketchLine_125.setAuxiliary(True) diff --git a/test.models/wheel_rim.py b/test.models/wheel_rim.py index a55623b16..6c5f4782a 100644 --- a/test.models/wheel_rim.py +++ b/test.models/wheel_rim.py @@ -187,7 +187,7 @@ SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_10.startPoint(), Sk SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_10.startPoint(), SketchLine_22.result(), 1, True) SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_6.results()[1], 15) model.do() -Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_2r-SketchArc_1_2r-SketchLine_3r-SketchArc_2_2r-SketchArc_3_2f-SketchLine_8f-SketchLine_10f-SketchArc_5_2f-SketchLine_12f-SketchArc_6_2r-SketchLine_14r-SketchLine_16r-SketchArc_7_2r-SketchLine_17r-SketchLine_18r-SketchLine_20f-SketchArc_8_2f-SketchLine_23r-SketchArc_10_2f-SketchLine_24r")], model.selection("EDGE", "PartSet/OX"), 360, 0) +Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_8f-SketchLine_10f-SketchLine_24r-SketchLine_23r-SketchArc_8_2f-SketchLine_19r-SketchLine_18r-SketchLine_17r-SketchArc_7_2r-SketchLine_16r-SketchArc_10_2f-SketchLine_12f-SketchArc_5_2f-SketchArc_6_2r-SketchLine_14r-SketchArc_3_2f-SketchArc_2_2r-SketchLine_3r-SketchArc_1_2r-SketchLine_2r")], model.selection("EDGE", "PartSet/OX"), 360, 0) Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) SketchCircle_1 = Sketch_2.addCircle(0, 120, 7.5) SketchLine_24 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OZ")) -- 2.39.2