From f52e8e69236d96ddada77e91d689a9c52ed1ab43 Mon Sep 17 00:00:00 2001 From: vsv Date: Mon, 15 May 2006 09:03:41 +0000 Subject: [PATCH] *** empty log message *** --- Makefile.in | 20 + adm_local/Makefile.in | 19 + adm_local/unix/make_commence.in | 12 +- build_configure | 4 +- doc/Makefile.in | 19 + doc/salome/gui/GEOM/add_point_on_edge.htm | 48 +- doc/salome/gui/GEOM/arc.htm | 16 +- doc/salome/gui/GEOM/archimede.htm | 2 +- .../gui/GEOM/basic_geometrical_objects.htm | 2 +- doc/salome/gui/GEOM/basic_operations.htm | 2 +- doc/salome/gui/GEOM/blocks.htm | 116 - doc/salome/gui/GEOM/blocks_operations.htm | 2 +- doc/salome/gui/GEOM/boolean_operations.htm | 2 +- doc/salome/gui/GEOM/box.htm | 42 +- doc/salome/gui/GEOM/building_by_blocks.htm | 2 +- doc/salome/gui/GEOM/chamfer.htm | 33 +- .../gui/GEOM/changing_display_parameters.htm | 4 +- .../GEOM/changing_displaying_parameters.htm | 223 -- doc/salome/gui/GEOM/check_free_boundaries.htm | 37 +- doc/salome/gui/GEOM/check_free_faces.htm | 33 +- doc/salome/gui/GEOM/circle.htm | 15 +- doc/salome/gui/GEOM/close_contour.htm | 11 +- doc/salome/gui/GEOM/color.htm | 7 +- doc/salome/gui/GEOM/common.htm | 7 +- doc/salome/gui/GEOM/complex_objects.htm | 2 +- doc/salome/gui/GEOM/compound.htm | 2 +- doc/salome/gui/GEOM/cone.htm | 46 +- doc/salome/gui/GEOM/curve.htm | 27 +- doc/salome/gui/GEOM/cut.htm | 9 +- doc/salome/gui/GEOM/cylinder.htm | 29 +- doc/salome/gui/GEOM/edge.htm | 2 +- doc/salome/gui/GEOM/ellipse.htm | 6 +- doc/salome/gui/GEOM/explode.htm | 2 +- doc/salome/gui/GEOM/explode_on_blocks.htm | 2 +- doc/salome/gui/GEOM/extrusion.htm | 42 +- doc/salome/gui/GEOM/face.htm | 2 +- .../gui/GEOM/files/introduction_to_geom.htm | 21 +- .../files/salome2_sp3_basicgui_functions.htm | 885 ------ ...salome2_sp3_basicgui_functions_image28.gif | Bin 904 -> 0 bytes .../salome2_sp3_booleangui_functions.htm | 31 +- .../files/salome2_sp3_buildgui_functions.htm | 458 --- .../salome2_sp3_displaygui_functions.htm | 225 -- ...lome2_sp3_displaygui_functions_image51.gif | Bin 946 -> 0 bytes ...lome2_sp3_displaygui_functions_image52.gif | Bin 958 -> 0 bytes ...lome2_sp3_displaygui_functions_image53.gif | Bin 950 -> 0 bytes ...lome2_sp3_displaygui_functions_image54.gif | Bin 994 -> 0 bytes ...lome2_sp3_displaygui_functions_image55.gif | Bin 987 -> 0 bytes .../salome2_sp3_generationgui_functions.htm | 307 -- .../salome2_sp3_geomtoolsgui_functions.htm | 24 +- .../salome2_sp3_measuregui_functions.htm | 97 +- .../salome2_sp3_operationgui_functions.htm | 637 ----- .../salome2_sp3_primitivegui_functions.htm | 395 --- .../files/salome2_sp3_repairgui_functions.htm | 898 ------ ...alome2_sp3_transformationgui_functions.htm | 669 ----- ...3_transformationgui_functions_image130.gif | Bin 935 -> 0 bytes doc/salome/gui/GEOM/fillet.htm | 24 +- doc/salome/gui/GEOM/filling.htm | 24 +- doc/salome/gui/GEOM/fuse.htm | 7 +- doc/salome/gui/GEOM/geom.log | 120 +- doc/salome/gui/GEOM/geometrical_objects.htm | 2 +- doc/salome/gui/GEOM/glue_faces.htm | 12 +- doc/salome/gui/GEOM/groups.htm | 2 +- doc/salome/gui/GEOM/image10.jpg | Bin 3449 -> 0 bytes doc/salome/gui/GEOM/image11.gif | Bin 1646 -> 0 bytes doc/salome/gui/GEOM/image11.jpg | Bin 2844 -> 0 bytes doc/salome/gui/GEOM/image12.gif | Bin 1604 -> 0 bytes doc/salome/gui/GEOM/image12.jpg | Bin 3830 -> 0 bytes doc/salome/gui/GEOM/image121.jpg | Bin 3718 -> 0 bytes doc/salome/gui/GEOM/image122.jpg | Bin 4025 -> 0 bytes doc/salome/gui/GEOM/image124.jpg | Bin 6196 -> 0 bytes doc/salome/gui/GEOM/image127.jpg | Bin 3736 -> 0 bytes doc/salome/gui/GEOM/image128.jpg | Bin 1902 -> 0 bytes doc/salome/gui/GEOM/image129.jpg | Bin 1964 -> 0 bytes doc/salome/gui/GEOM/image13.gif | Bin 1499 -> 0 bytes doc/salome/gui/GEOM/image130.jpg | Bin 3272 -> 0 bytes doc/salome/gui/GEOM/image133.jpg | Bin 3685 -> 0 bytes doc/salome/gui/GEOM/image14.gif | Bin 1309 -> 0 bytes doc/salome/gui/GEOM/image147.jpg | Bin 4258 -> 0 bytes doc/salome/gui/GEOM/image149.jpg | Bin 3666 -> 0 bytes doc/salome/gui/GEOM/image15.gif | Bin 1790 -> 0 bytes doc/salome/gui/GEOM/image150.jpg | Bin 4622 -> 0 bytes doc/salome/gui/GEOM/image151.jpg | Bin 10219 -> 0 bytes doc/salome/gui/GEOM/image16.gif | Bin 1442 -> 0 bytes doc/salome/gui/GEOM/image163.jpg | Bin 6781 -> 0 bytes doc/salome/gui/GEOM/image164.jpg | Bin 5424 -> 0 bytes doc/salome/gui/GEOM/image17.gif | Bin 1721 -> 0 bytes doc/salome/gui/GEOM/image170.jpg | Bin 8878 -> 0 bytes doc/salome/gui/GEOM/image171.jpg | Bin 8023 -> 0 bytes doc/salome/gui/GEOM/image172.jpg | Bin 7109 -> 0 bytes doc/salome/gui/GEOM/image18.jpg | Bin 3378 -> 0 bytes doc/salome/gui/GEOM/image188.jpg | Bin 18274 -> 0 bytes doc/salome/gui/GEOM/image189.jpg | Bin 24603 -> 0 bytes doc/salome/gui/GEOM/image19.gif | Bin 1801 -> 0 bytes doc/salome/gui/GEOM/image191.jpg | Bin 20633 -> 0 bytes doc/salome/gui/GEOM/image197.jpg | Bin 9273 -> 0 bytes doc/salome/gui/GEOM/image20.gif | Bin 1628 -> 0 bytes doc/salome/gui/GEOM/image201.jpg | Bin 5193 -> 0 bytes doc/salome/gui/GEOM/image202.jpg | Bin 6377 -> 0 bytes doc/salome/gui/GEOM/image21.gif | Bin 1407 -> 0 bytes doc/salome/gui/GEOM/image22.gif | Bin 1450 -> 0 bytes doc/salome/gui/GEOM/image23.gif | Bin 1588 -> 0 bytes doc/salome/gui/GEOM/image24.gif | Bin 1119 -> 0 bytes doc/salome/gui/GEOM/image25.gif | Bin 1106 -> 0 bytes doc/salome/gui/GEOM/image27.jpg | Bin 2716 -> 0 bytes doc/salome/gui/GEOM/image31.gif | Bin 5750 -> 0 bytes doc/salome/gui/GEOM/image52.jpg | Bin 2701 -> 0 bytes doc/salome/gui/GEOM/image53.jpg | Bin 4321 -> 0 bytes doc/salome/gui/GEOM/image54.jpg | Bin 4615 -> 0 bytes doc/salome/gui/GEOM/image6.gif | Bin 1938 -> 0 bytes doc/salome/gui/GEOM/image67.jpg | Bin 2823 -> 0 bytes doc/salome/gui/GEOM/image7.gif | Bin 1529 -> 0 bytes doc/salome/gui/GEOM/image76.jpg | Bin 3194 -> 0 bytes doc/salome/gui/GEOM/image78.jpg | Bin 3702 -> 0 bytes doc/salome/gui/GEOM/image79.jpg | Bin 3637 -> 0 bytes doc/salome/gui/GEOM/image8.gif | Bin 1675 -> 0 bytes doc/salome/gui/GEOM/image8.jpg | Bin 3262 -> 0 bytes doc/salome/gui/GEOM/image80.jpg | Bin 3884 -> 0 bytes doc/salome/gui/GEOM/image81.jpg | Bin 5230 -> 0 bytes doc/salome/gui/GEOM/image82.jpg | Bin 3527 -> 0 bytes doc/salome/gui/GEOM/image83.jpg | Bin 3741 -> 0 bytes doc/salome/gui/GEOM/image84.jpg | Bin 3512 -> 0 bytes doc/salome/gui/GEOM/image85.jpg | Bin 3785 -> 0 bytes doc/salome/gui/GEOM/image9.gif | Bin 1352 -> 0 bytes doc/salome/gui/GEOM/image9.jpg | Bin 2956 -> 0 bytes doc/salome/gui/GEOM/image94.jpg | Bin 2935 -> 0 bytes doc/salome/gui/GEOM/image95.jpg | Bin 3417 -> 0 bytes doc/salome/gui/GEOM/image96.jpg | Bin 3599 -> 0 bytes doc/salome/gui/GEOM/image97.jpg | Bin 3574 -> 0 bytes doc/salome/gui/GEOM/image98.jpg | Bin 2921 -> 0 bytes doc/salome/gui/GEOM/isos.htm | 2 +- doc/salome/gui/GEOM/line.htm | 6 +- .../gui/GEOM/local_coordinate_system.htm | 52 +- doc/salome/gui/GEOM/measurement_tools.htm | 2 +- doc/salome/gui/GEOM/mirror_image.htm | 37 +- doc/salome/gui/GEOM/modify_the_location.htm | 77 +- doc/salome/gui/GEOM/multi_rotation.htm | 37 +- doc/salome/gui/GEOM/multi_transformation.htm | 31 +- doc/salome/gui/GEOM/multi_translation.htm | 59 +- doc/salome/gui/GEOM/newentity_blocks.htm | 69 +- doc/salome/gui/GEOM/offset_surface.htm | 2 +- doc/salome/gui/GEOM/partition.htm | 27 +- doc/salome/gui/GEOM/pics/creategroup.png | Bin 15350 -> 0 bytes doc/salome/gui/GEOM/pics/export.png | Bin 14172 -> 0 bytes doc/salome/gui/GEOM/pics/import.png | Bin 15937 -> 0 bytes doc/salome/gui/GEOM/pipe_creation.htm | 18 +- doc/salome/gui/GEOM/plane.htm | 70 +- doc/salome/gui/GEOM/point.htm | 47 +- doc/salome/gui/GEOM/primitives.htm | 2 +- doc/salome/gui/GEOM/propagate.htm | 2 +- doc/salome/gui/GEOM/repairing_operations.htm | 10 +- doc/salome/gui/GEOM/revolution.htm | 24 +- doc/salome/gui/GEOM/rotation.htm | 2 +- doc/salome/gui/GEOM/scale_transform.htm | 2 +- doc/salome/gui/GEOM/section.htm | 7 +- doc/salome/gui/GEOM/sewing.htm | 18 +- doc/salome/gui/GEOM/shape_processing.htm | 421 +-- doc/salome/gui/GEOM/shell.htm | 4 +- doc/salome/gui/GEOM/sketcher.htm | 4 +- doc/salome/gui/GEOM/sketcher_tui.htm | 2 +- doc/salome/gui/GEOM/solid.htm | 28 +- doc/salome/gui/GEOM/sphere.htm | 22 +- doc/salome/gui/GEOM/suppress_faces.htm | 17 +- doc/salome/gui/GEOM/suppress_holes.htm | 24 +- .../gui/GEOM/suppress_internal_wires.htm | 12 +- .../gui/GEOM/transformation_operations.htm | 2 +- doc/salome/gui/GEOM/translation.htm | 18 +- doc/salome/gui/GEOM/transparency.htm | 21 +- doc/salome/gui/GEOM/turus.htm | 21 +- doc/salome/gui/GEOM/vector.htm | 15 +- doc/salome/gui/GEOM/whdata/whftdata0.htm | 12 +- doc/salome/gui/GEOM/whdata/whfts.htm | 4 +- doc/salome/gui/GEOM/whdata/whfwdata0.htm | 2513 +++++++++-------- doc/salome/gui/GEOM/whdata/whtdata0.htm | 30 +- doc/salome/gui/GEOM/whgdata/whlstf0.htm | 6 +- doc/salome/gui/GEOM/whgdata/whlstf1.htm | 4 +- doc/salome/gui/GEOM/whgdata/whlstf10.htm | 4 +- doc/salome/gui/GEOM/whgdata/whlstf11.htm | 8 +- doc/salome/gui/GEOM/whgdata/whlstf12.htm | 8 +- doc/salome/gui/GEOM/whgdata/whlstf13.htm | 9 +- doc/salome/gui/GEOM/whgdata/whlstf14.htm | 45 - doc/salome/gui/GEOM/whgdata/whlstf15.htm | 48 - doc/salome/gui/GEOM/whgdata/whlstf2.htm | 4 +- doc/salome/gui/GEOM/whgdata/whlstf3.htm | 6 +- doc/salome/gui/GEOM/whgdata/whlstf4.htm | 6 +- doc/salome/gui/GEOM/whgdata/whlstf5.htm | 6 +- doc/salome/gui/GEOM/whgdata/whlstf6.htm | 10 +- doc/salome/gui/GEOM/whgdata/whlstf7.htm | 8 +- doc/salome/gui/GEOM/whgdata/whlstf8.htm | 4 +- doc/salome/gui/GEOM/whgdata/whlstf9.htm | 6 +- doc/salome/gui/GEOM/whgdata/whlstfl0.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl1.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl10.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl11.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl12.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl13.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl14.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl15.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl16.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl17.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl18.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl19.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl2.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl20.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl21.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl22.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl23.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl24.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl25.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl3.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl4.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl6.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl7.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl8.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstfl9.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstt0.htm | 2 +- doc/salome/gui/GEOM/whgdata/whlstt1.htm | 12 +- doc/salome/gui/GEOM/whgdata/whlstt10.htm | 29 +- doc/salome/gui/GEOM/whgdata/whlstt11.htm | 37 +- doc/salome/gui/GEOM/whgdata/whlstt12.htm | 35 +- doc/salome/gui/GEOM/whgdata/whlstt13.htm | 35 +- doc/salome/gui/GEOM/whgdata/whlstt14.htm | 31 +- doc/salome/gui/GEOM/whgdata/whlstt15.htm | 25 +- doc/salome/gui/GEOM/whgdata/whlstt16.htm | 30 +- doc/salome/gui/GEOM/whgdata/whlstt17.htm | 67 - doc/salome/gui/GEOM/whgdata/whlstt2.htm | 21 +- doc/salome/gui/GEOM/whgdata/whlstt3.htm | 35 +- doc/salome/gui/GEOM/whgdata/whlstt4.htm | 25 +- doc/salome/gui/GEOM/whgdata/whlstt5.htm | 34 +- doc/salome/gui/GEOM/whgdata/whlstt6.htm | 32 +- doc/salome/gui/GEOM/whgdata/whlstt7.htm | 29 +- doc/salome/gui/GEOM/whgdata/whlstt8.htm | 31 +- doc/salome/gui/GEOM/whgdata/whlstt9.htm | 24 +- doc/salome/gui/GEOM/whgdata/whnvl32.htm | 34 +- doc/salome/gui/GEOM/whskin_info.htm | 2 +- doc/salome/gui/GEOM/whxdata/whftdata0.xml | 12 +- doc/salome/gui/GEOM/whxdata/whfts.xml | 4 +- doc/salome/gui/GEOM/whxdata/whfwdata0.xml | 2513 +++++++++-------- doc/salome/gui/GEOM/whxdata/whtdata0.xml | 33 +- doc/salome/gui/GEOM/wire.htm | 2 +- doc/salome/gui/GEOM/wireframe_and_shading.htm | 41 +- doc/salome/gui/GEOM/working_plane.htm | 15 +- doc/salome/gui/GEOM/working_with_groups.htm | 20 +- doc/salome/tui/GEOM/doxyfile | 117 +- doc/salome/tui/GEOM/doxyfile_py | 126 +- doc/salome/tui/GEOM/sources/myheader.html | 12 - .../tui/GEOM/sources/static/doxygen.css | 153 +- doc/salome/tui/Makefile.in | 3 +- idl/Makefile.in | 19 + src/EntityGUI/EntityGUI.cxx | 8 +- src/EntityGUI/EntityGUI.h | 3 - src/EntityGUI/EntityGUI_Skeleton_QTD.cxx | 19 + src/EntityGUI/EntityGUI_Skeleton_QTD.h | 19 + src/GEOM/Makefile.in | 19 + src/GEOMBase/GEOMBase_Helper.cxx | 18 +- src/GEOMContext/GEOM_icons.po | 19 + src/GEOMContext/GEOM_msg_en.po | 19 + src/GEOMContext/GEOM_msg_fr.po | 19 + src/GEOMGUI/GEOM_images.po | 19 + src/GEOMGUI/GEOM_msg_en.po | 19 + src/GEOMGUI/GEOM_msg_fr.po | 19 + src/GEOMGUI/GeometryGUI.cxx | 50 +- src/GEOMGUI/GeometryGUI_Swig.cxx | 174 +- src/GEOMGUI/GeometryGUI_Swig.hxx | 1 + src/GEOMGUI/GeometryGUI_Swig.i | 1 + src/GEOMImpl/GEOMImpl_MirrorDriver.cxx | 18 +- src/GEOMImpl/Makefile.in | 19 + src/GEOM_I/GEOM_DumpPython.cc | 2 +- src/GEOM_SWIG/GEOM_Nut.py | 19 + src/GEOM_SWIG/GEOM_TestMeasures.py | 19 + src/GEOM_SWIG/GEOM_cyl2complementary.py | 24 +- src/GEOM_SWIG/GEOM_example3.py | 38 +- src/GEOM_SWIG/GEOM_example4.py | 2 +- src/GEOM_SWIG/GEOM_shared_modules.py | 19 + src/GEOM_SWIG/GEOM_shellSolid.py | 19 + src/GEOM_SWIG/GEOM_tube_geom.py | 19 + src/GEOM_SWIG/GEOM_tube_geom_gg2.py | 48 +- src/GEOM_SWIG/PAL_MESH_019_020_geometry.py | 19 + src/GEOM_SWIG/PAL_MESH_028_geometry.py | 19 + src/GEOM_SWIG/PAL_MESH_030_geometry.py | 19 + src/GEOM_SWIG/PAL_MESH_033_geometry.py | 19 + src/GEOM_SWIG/PAL_MESH_035_geometry.py | 19 + src/GEOM_SWIG/geompy.py | 4 +- src/MeasureGUI/MeasureGUI_Skeleton_QTD.cxx | 19 + src/MeasureGUI/MeasureGUI_Skeleton_QTD.h | 19 + 284 files changed, 5010 insertions(+), 9131 deletions(-) delete mode 100755 doc/salome/gui/GEOM/blocks.htm delete mode 100755 doc/salome/gui/GEOM/changing_displaying_parameters.htm delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_basicgui_functions.htm delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_basicgui_functions_salome2_sp3_basicgui_functions_image28.gif delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_buildgui_functions.htm delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions.htm delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image51.gif delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image52.gif delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image53.gif delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image54.gif delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image55.gif delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_generationgui_functions.htm delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_operationgui_functions.htm delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_primitivegui_functions.htm delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_repairgui_functions.htm delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_transformationgui_functions.htm delete mode 100755 doc/salome/gui/GEOM/files/salome2_sp3_transformationgui_functions_salome2_sp3_transformationgui_functions_image130.gif delete mode 100755 doc/salome/gui/GEOM/image10.jpg delete mode 100755 doc/salome/gui/GEOM/image11.gif delete mode 100755 doc/salome/gui/GEOM/image11.jpg delete mode 100755 doc/salome/gui/GEOM/image12.gif delete mode 100755 doc/salome/gui/GEOM/image12.jpg delete mode 100755 doc/salome/gui/GEOM/image121.jpg delete mode 100755 doc/salome/gui/GEOM/image122.jpg delete mode 100755 doc/salome/gui/GEOM/image124.jpg delete mode 100755 doc/salome/gui/GEOM/image127.jpg delete mode 100755 doc/salome/gui/GEOM/image128.jpg delete mode 100755 doc/salome/gui/GEOM/image129.jpg delete mode 100755 doc/salome/gui/GEOM/image13.gif delete mode 100755 doc/salome/gui/GEOM/image130.jpg delete mode 100755 doc/salome/gui/GEOM/image133.jpg delete mode 100755 doc/salome/gui/GEOM/image14.gif delete mode 100755 doc/salome/gui/GEOM/image147.jpg delete mode 100755 doc/salome/gui/GEOM/image149.jpg delete mode 100755 doc/salome/gui/GEOM/image15.gif delete mode 100755 doc/salome/gui/GEOM/image150.jpg delete mode 100755 doc/salome/gui/GEOM/image151.jpg delete mode 100755 doc/salome/gui/GEOM/image16.gif delete mode 100755 doc/salome/gui/GEOM/image163.jpg delete mode 100755 doc/salome/gui/GEOM/image164.jpg delete mode 100755 doc/salome/gui/GEOM/image17.gif delete mode 100755 doc/salome/gui/GEOM/image170.jpg delete mode 100755 doc/salome/gui/GEOM/image171.jpg delete mode 100755 doc/salome/gui/GEOM/image172.jpg delete mode 100755 doc/salome/gui/GEOM/image18.jpg delete mode 100755 doc/salome/gui/GEOM/image188.jpg delete mode 100755 doc/salome/gui/GEOM/image189.jpg delete mode 100755 doc/salome/gui/GEOM/image19.gif delete mode 100755 doc/salome/gui/GEOM/image191.jpg delete mode 100755 doc/salome/gui/GEOM/image197.jpg delete mode 100755 doc/salome/gui/GEOM/image20.gif delete mode 100755 doc/salome/gui/GEOM/image201.jpg delete mode 100755 doc/salome/gui/GEOM/image202.jpg delete mode 100755 doc/salome/gui/GEOM/image21.gif delete mode 100755 doc/salome/gui/GEOM/image22.gif delete mode 100755 doc/salome/gui/GEOM/image23.gif delete mode 100755 doc/salome/gui/GEOM/image24.gif delete mode 100755 doc/salome/gui/GEOM/image25.gif delete mode 100755 doc/salome/gui/GEOM/image27.jpg delete mode 100755 doc/salome/gui/GEOM/image31.gif delete mode 100755 doc/salome/gui/GEOM/image52.jpg delete mode 100755 doc/salome/gui/GEOM/image53.jpg delete mode 100755 doc/salome/gui/GEOM/image54.jpg delete mode 100755 doc/salome/gui/GEOM/image6.gif delete mode 100755 doc/salome/gui/GEOM/image67.jpg delete mode 100755 doc/salome/gui/GEOM/image7.gif delete mode 100755 doc/salome/gui/GEOM/image76.jpg delete mode 100755 doc/salome/gui/GEOM/image78.jpg delete mode 100755 doc/salome/gui/GEOM/image79.jpg delete mode 100755 doc/salome/gui/GEOM/image8.gif delete mode 100755 doc/salome/gui/GEOM/image8.jpg delete mode 100755 doc/salome/gui/GEOM/image80.jpg delete mode 100755 doc/salome/gui/GEOM/image81.jpg delete mode 100755 doc/salome/gui/GEOM/image82.jpg delete mode 100755 doc/salome/gui/GEOM/image83.jpg delete mode 100755 doc/salome/gui/GEOM/image84.jpg delete mode 100755 doc/salome/gui/GEOM/image85.jpg delete mode 100755 doc/salome/gui/GEOM/image9.gif delete mode 100755 doc/salome/gui/GEOM/image9.jpg delete mode 100755 doc/salome/gui/GEOM/image94.jpg delete mode 100755 doc/salome/gui/GEOM/image95.jpg delete mode 100755 doc/salome/gui/GEOM/image96.jpg delete mode 100755 doc/salome/gui/GEOM/image97.jpg delete mode 100755 doc/salome/gui/GEOM/image98.jpg delete mode 100755 doc/salome/gui/GEOM/pics/creategroup.png delete mode 100755 doc/salome/gui/GEOM/pics/export.png delete mode 100755 doc/salome/gui/GEOM/pics/import.png delete mode 100755 doc/salome/gui/GEOM/whgdata/whlstf14.htm delete mode 100755 doc/salome/gui/GEOM/whgdata/whlstf15.htm delete mode 100755 doc/salome/gui/GEOM/whgdata/whlstt17.htm diff --git a/Makefile.in b/Makefile.in index b552694e5..59fff7112 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # -* Makefile *- # # Author : Patrick GOLDBRONN (CEA) @@ -21,6 +40,7 @@ GEOM_en.xml \ GEOM_fr.xml \ GEOM.config \ GEOMCatalog.xml \ +SalomeApp.xml \ GEOMDS_Resources \ ImportExport \ ShHealing \ diff --git a/adm_local/Makefile.in b/adm_local/Makefile.in index 9b5e810db..734bc820a 100644 --- a/adm_local/Makefile.in +++ b/adm_local/Makefile.in @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # source path top_srcdir=@top_srcdir@ top_builddir=.. diff --git a/adm_local/unix/make_commence.in b/adm_local/unix/make_commence.in index d87c15807..3fca6a6d8 100644 --- a/adm_local/unix/make_commence.in +++ b/adm_local/unix/make_commence.in @@ -231,7 +231,13 @@ all: Makefile: $(top_builddir)/config.status $(srcdir)/Makefile.in cd $(top_builddir) ; ./config.status -$(top_builddir)/config.status: $(top_srcdir)/configure +LOCAL_MAKE = make_commence make_omniorb + +KERNEL_MAKE = make_module make_conclude depend SALOMEconfig.h F77config.h sstream envScript + +$(top_builddir)/config.status: $(top_srcdir)/configure \ + $(LOCAL_MAKE:%=$(top_srcdir)/adm_local/unix/%.in) \ + $(KERNEL_MAKE:%=$(KERNEL_ROOT_DIR)/salome_adm/unix/%.in) cd $(top_builddir) ; ./config.status --recheck # VPATH contain $(srcdir), so make configure is good in top_srcdir and we must add target configure otherwise :-) @@ -246,7 +252,7 @@ $(top_srcdir)/configure.in: $(top_srcdir)/configure.in.base cd $(top_srcdir) && ./build_configure -ACLOCAL_SRC = \ +ACLOCAL_KERNEL = \ ac_cxx_bool.m4 check_corba.m4 \ ac_cxx_depend_flag.m4 check_hdf5.m4 enable_pthreads.m4 \ ac_cxx_mutable.m4 check_mico.m4 libtool.m4 \ @@ -259,7 +265,7 @@ ACLOCAL_GUI = \ check_vtk.m4 check_opengl.m4 check_qt.m4 \ check_GUI.m4 check_corba_in_GUI.m4 -$(top_srcdir)/aclocal.m4: $(ACLOCAL_SRC:%=@KERNEL_ROOT_DIR@/salome_adm/unix/config_files/%) \ +$(top_srcdir)/aclocal.m4: $(ACLOCAL_KERNEL:%=@KERNEL_ROOT_DIR@/salome_adm/unix/config_files/%) \ $(ACLOCAL_GUI:%=@GUI_ROOT_DIR@/adm_local/unix/config_files/%) cd $(top_srcdir) ; aclocal -I adm_local/unix/config_files -I @KERNEL_ROOT_DIR@/salome_adm/unix/config_files \ -I @GUI_ROOT_DIR@/adm_local/unix/config_files diff --git a/build_configure b/build_configure index 19c078a46..7e516789c 100755 --- a/build_configure +++ b/build_configure @@ -131,9 +131,9 @@ echo " ./salome_adm/unix/SALOMEconfig.h \\" >> configure.in_tmp1 echo " ./salome_adm/unix/F77config.h \\" >> configure.in_tmp1 echo " ./salome_adm/unix/sstream \\" >> configure.in_tmp1 echo " ./salome_adm/unix/depend \\" >> configure.in_tmp1 -echo " ./adm_local/unix/make_omniorb \\" >> configure.in_tmp1 +echo " ./adm_local/unix/make_omniorb:${ABS_CONF_DIR}/adm_local/unix/make_omniorb.in \\" >> configure.in_tmp1 echo " ./salome_adm/unix/envScript \\" >> configure.in_tmp1 -echo " ./adm_local/unix/make_commence \\" >> configure.in_tmp1 +echo " ./adm_local/unix/make_commence:${ABS_CONF_DIR}/adm_local/unix/make_commence.in \\" >> configure.in_tmp1 echo " ./salome_adm/unix/make_conclude \\" >> configure.in_tmp1 echo " ./salome_adm/unix/make_module \\" >> configure.in_tmp1 diff --git a/doc/Makefile.in b/doc/Makefile.in index 7295ede75..59e6c5962 100644 --- a/doc/Makefile.in +++ b/doc/Makefile.in @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # -* Makefile *- # diff --git a/doc/salome/gui/GEOM/add_point_on_edge.htm b/doc/salome/gui/GEOM/add_point_on_edge.htm index 2134b248d..4e8e4cd24 100755 --- a/doc/salome/gui/GEOM/add_point_on_edge.htm +++ b/doc/salome/gui/GEOM/add_point_on_edge.htm @@ -16,26 +16,25 @@ if (navigator.appName !="Netscape") - - - - - - - - -

Building of blocks

- -

 

- - - -

 

- -

 

- -

To use these options:

- -

 

- -

In the main menu select Blocks - submenu.

- -

 

- -

 

- -

 

- -

 

- -

 

- -

 

- -

 

- - - - diff --git a/doc/salome/gui/GEOM/blocks_operations.htm b/doc/salome/gui/GEOM/blocks_operations.htm index a040a5b4c..dd9f31a7e 100755 --- a/doc/salome/gui/GEOM/blocks_operations.htm +++ b/doc/salome/gui/GEOM/blocks_operations.htm @@ -46,7 +46,7 @@ if (window.gbWhTopic) { if (window.addTocInfo) { - addTocInfo("GEOM module\nTUI Scripts\nTransformation\nBlocks Operations"); + addTocInfo("Geometry module\nTUI Scripts\nTransformation\nBlocks Operations"); addButton("show",BTN_TEXT,"Show","","","","",0,0,"","",""); } diff --git a/doc/salome/gui/GEOM/boolean_operations.htm b/doc/salome/gui/GEOM/boolean_operations.htm index 8593ee771..8e40f39d1 100755 --- a/doc/salome/gui/GEOM/boolean_operations.htm +++ b/doc/salome/gui/GEOM/boolean_operations.htm @@ -46,7 +46,7 @@ if (window.gbWhTopic) { if (window.addTocInfo) { - addTocInfo("GEOM module\nTUI Scripts\nTransformation\nBoolean Operations"); + addTocInfo("Geometry module\nTUI Scripts\nTransformation\nBoolean Operations"); addButton("show",BTN_TEXT,"Show","","","","",0,0,"","",""); } diff --git a/doc/salome/gui/GEOM/box.htm b/doc/salome/gui/GEOM/box.htm index d03a7cf81..27267cd21 100755 --- a/doc/salome/gui/GEOM/box.htm +++ b/doc/salome/gui/GEOM/box.htm @@ -17,14 +17,15 @@ if (navigator.appName !="Netscape") img_whs1 { width:20px; height:20px; border-style:none; } p.whs2 { font-size:12pt; } p.whs3 { font-style:italic; } -img_whs4 { border:none; width:312px; height:324px; float:none; border-style:none; } -p.whs5 { font-weight:normal; } -img_whs6 { border:none; width:312px; height:332px; float:none; border-style:none; } -p.whs7 { font-size:12pt; font-weight:bold; } -p.whs8 { font-size:12pt; font-weight:bold; font-style:normal; } -p.whs9 { font-size:12pt; font-style:normal; font-weight:bold; } -p.whs10 { font-size:12pt; font-style:normal; font-weight:normal; } -img_whs11 { border:none; width:267px; height:280px; float:none; border-style:none; } +p.whs4 { margin-left:40px; } +img_whs5 { border:none; width:312px; height:324px; float:none; border-style:none; } +p.whs6 { font-weight:normal; } +p.whs7 { font-size:12pt; margin-left:40px; } +img_whs8 { border:none; width:312px; height:332px; float:none; border-style:none; } +p.whs9 { font-size:12pt; font-weight:bold; } +p.whs10 { font-size:12pt; font-weight:bold; font-style:normal; } +p.whs11 { font-size:12pt; font-style:normal; font-weight:bold; } +img_whs12 { border:none; width:267px; height:280px; float:none; border-style:none; } --> -

Changing Display Parameters

+

Viewing Geometrical Objects

Changing Display Mode

diff --git a/doc/salome/gui/GEOM/changing_displaying_parameters.htm b/doc/salome/gui/GEOM/changing_displaying_parameters.htm deleted file mode 100755 index 683769b8c..000000000 --- a/doc/salome/gui/GEOM/changing_displaying_parameters.htm +++ /dev/null @@ -1,223 +0,0 @@ - - - - - -Changing displaying parameters - - - - - - - - - - - -

Changing displaying parameters

- -

In GEOM you can set different - displaying parameters for visualization of geometrical objects in the - viewer:

- -

 

- - - -

 

- -

To set displaying parameters of a geometrical object:

- -

 

- -

Right-click on this geometrical object in - the viewer and from the pop-up menu select Properties.

- -

 

- -

 

- -

Wireframe/Shading

- -

 

- -

This - option is relevant for viewing 3D objects. Wireframe mode means that  

- -

 

- -

Description: - Set the display mode of the selected shape.

- -

 

- -

TUI - Command: gg.setDisplayMode(ID, Short)

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

 

- -

Color

- -

 

- -

Description: - Change the color of a shape.

- -

 

- -

TUI Command: - gg.setColor(ID, Short, Short, Short)

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

 

- -

 

- -

Transparency

- -

 

- -

Description: - Change the transparency (between 0 & 1) of a shape.

- -

 

- -

TUI Command: - gg.setTransparency(ID, Double)

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

 

- - - - diff --git a/doc/salome/gui/GEOM/check_free_boundaries.htm b/doc/salome/gui/GEOM/check_free_boundaries.htm index d5da15b92..549ae0551 100755 --- a/doc/salome/gui/GEOM/check_free_boundaries.htm +++ b/doc/salome/gui/GEOM/check_free_boundaries.htm @@ -16,10 +16,10 @@ if (navigator.appName !="Netscape") - - -

Introduction to GEOM

+

Introduction to Geometry

-

GEOM module of - SALOME is destined for:

+

Geometry module + of SALOME is destined for:

 

@@ -103,7 +102,7 @@ else -

 

-

There is a general TUI command covering +

There is a general TUI command covering all these operations, which can be used alongside with separate commands for each operation.

-

geompy.MakeBoolean(Shape1, +

geompy.MakeBoolean(Shape1, Shape2, Operation), where Shape1 is the first argument and Shape2 is the second argument of Boolean operation, Operation is a type of the Boolean operation (1 – Common, 2 – Cut, 3 – Fuse, 4 – Section).

diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_buildgui_functions.htm b/doc/salome/gui/GEOM/files/salome2_sp3_buildgui_functions.htm deleted file mode 100755 index 42c0ee8ea..000000000 --- a/doc/salome/gui/GEOM/files/salome2_sp3_buildgui_functions.htm +++ /dev/null @@ -1,458 +0,0 @@ - - - - - -Titre - - - - - - - - - - - -

Building geometrical objects

- -

In GEOM you can create basic and advanced geometrical objects - (2D & 3D elements) using the following building functions:

- -

 

- - - -

 

- -

 

- -

 

- -

To use Explode:

- -

 

- -

In the main menu select New - Entity > Explode.

- -

 

- -

Explode

- -

 

- -

Description: - Returns a list of subshapes (vertices, edges, wires etc.) of the given - shape.

- -

 

- -

Result : - List of GEOM_Objects.

- -

 

- -

TUI Command: -

- - - -

 

- -

Arguments: - 1 SHAPE + 1 type of SubShape.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

 

- -

To use building functions:

- -

 

- -

In the main menu select - New Entity > Build - submenu.

- -

 

- -

Edge

- -

 

- -

Description: - Creates an edge.

- -

 

- -

Result: GEOM_Object - (EDGE).

- -

 

- -

TUI Command: - geompy.MakeEdge(Vertex1, Vertex2), - where Vertex1 and Vertex2 are correspondingly the first and the last vertex - of the edge.

- -

 

- -

Arguments: - Name + 2 vertices.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

- -

 

- -

Wire

- -

 

- -

Description: - Creates a wire.

- -

 

- -

Result: GEOM_Object - (WIRE).

- -

 

- -

TUI Command : - geompy.MakeWire(ListOfShape), - where ListOfShape is a list of edges and/or wires from which the wire - to be constructed.

- -

 

- -

Arguments: - Name + List of connected wires or edges..

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

- -

 

- -

Face

- -

 

- -

Description: - Creates a face.

- -

 

- -

Result: GEOM_Object - (FACE).

- -

 

- -

TUI Command: - geompy.MakeFace(Wire, WantPlanarFace), - where Wire is a wire and if boolean parameter WantPlanarFace is planar - then only a planar face or no face is constructed.

- -

 

- -

Arguments: - Name + 1 wire.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

- -

 

- -

Shell

- -

 

- -

Description: - Creates a shell.

- -

 

- -

Result: GEOM_Object - (SHELL).

- -

 

- -

TUI Command: - geompy.MakeShell(ListOfShape), - where ListOfShape is a list of faces and (or) shells from which the shell - is constructed.

- -

 

- -

Arguments: - Name + List of faces having connected edges.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

- -

 

- -

Solid

- -

 

- -

Description: - Creates a solid - closed geometrical 3D element.

- -

 

- -

Result: GEOM_Object - (SOLID).

- -

 

- -

TUI Command: - geompy.MakeSolid(ListOfShape), - where ListOfShape is a list of shells from which the solid is constructed.

- -

 

- -

Arguments: - Name + A closed shell or a list of shells.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

 

- -

Compound

- -

 

- -

Description: - Creates a compound.

- -

 

- -

Result: GEOM_Object - (COMPOUND).

- -

 

- -

TUI Command: - geompy.MakeCompound(ListOfShape), - where ListOfShape is a list of shapes from which the compound is constructed.

- -

 

- -

Arguments: - Name + List of shapes.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

- -

 

- -

 

- -

 

- - - - diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions.htm b/doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions.htm deleted file mode 100755 index ff0ba882b..000000000 --- a/doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions.htm +++ /dev/null @@ -1,225 +0,0 @@ - - - - - -Titre - - - - - - - - - - - -

Displaying/hiding objects

- -

Visualization is available in both viewers, OCC and VTK - . These viewers work independently, i.e. visibility of objects and their - graphic attributes may differ in OCC and VTK viewer. It - is reasonable to use the OCC viewer for GEOM module.

- -

 

- -

Displaying\hiding - different geometrical objects in the viewer is possible using the following - operations:

- -

 

- - - -

 

- -

To display\hide one or several objects in the viewer:

- -

 

- -

In the main menu select View - or right-click on the necessary object in the Object Browser and - from the associated pop-up menu choose the required operation.

- -

 

- -

 

- -

DisplayAll -

- -

 

- -

Description: - Displays all geometrical objects which have been created or imported in - the current study.

- -

 

- -

TUI - Command: sg.DisplayAll()

- -

 

- -

 

- -

EraseAll

- -

 

- -

Description: - Erases all shapes displayed in the viewer.

- -

 

- -

TUI - Command: sg.EraseAll()

- -

 

- -

 

- -

Display

- -

 

- -

Description: - Displays an object in 3D viewer.

- -

 

- -

TUI - Command:

- -

 

- -

 

- -

DisplayOnly

- -

 

- -

Description: - Displays only the selected geometrical element.

- -

 

- -

TUI - Command: sg.DisplayOnly(ID)

- -

 

- -

 

- -

Erase

- -

 

- -

Description - : Erases only the selected shape.

- -

 

- -

TUI - Command : sg.EraseOnly(ID)

- -

 

- -

 

- - - - diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image51.gif b/doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image51.gif deleted file mode 100755 index 83388cc3d2f2ed2d18e837c5036474f8d0c611aa..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 946 zcmZ?wbhEHb6k!ly_|5gdEz_<+l#G(2 zAu#+xfRTYw@h1x-1H*p?9gy!pdBTCCpW#2JjK_ur2OAmqm;x9Q92%L~1sP^|Y<$ST z#3mr&Q}IE*ftgc8OTb~%5{5QDMXfa!8%XM_|+^D z7BmDdW^>pT^J>y!Ulzsibu|)G7X;6C2#pdwA(Vctm%Fygcjw0?5sdNGU0Wr#Jh;Hb Y!ggY+cf+dFEF63DqN`w{F_Hch}yQY1fV%IRcg+B}PMF z*oJ`OPZqG>bU-91PdIQ)W)S9(@z}87AOjPlfdc|=Sc7A!o>z{IAK!LeZR z@qPvwF^L5e79MVwG@o}z;^TpXE!@ecSPU8(jG`KVvmVg zJO{R{3|`2(P>3hs^Rp{+jFOo$EGIlZv^-(=vnjW>K66{9dUDYlPs6uf^H|+i-SsGW V;J?BDwV#T?g7xwHS(um@tN|h@RNMdn diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image54.gif b/doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image54.gif deleted file mode 100755 index 5bed6049e63531ef48cf5b7edb4b72d8fa2acce8..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 994 zcmZ?wbh9u|6k!ly_|5DqN`w{F_H zch}yQY1a-MIB?|1kz>b?{r?ZtF$zXQU^s+;;!hT^H*`QGC{H+W>}QbYknspmXkg>z zQMn(o}0Ne&^DF6Tf diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image55.gif b/doc/salome/gui/GEOM/files/salome2_sp3_displaygui_functions_salome2_sp3_displaygui_functions_image55.gif deleted file mode 100755 index 4890bda6c1cb65cd1262ceba43e392b484df9506..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 987 zcmZ?wbh9u|6k!ly_|5)u^^o2OlB znRe~Skt4^BAN&6wsCE>LhQRO%0mYvzV9)4)NKl?|;Ml<+%^~AapuoV!!>5+RkZ_QR ziAkEN;K2e1=XM4G6^$7W4!E`}7>XGjxS-fLS)I`)f>WUZsGCE{fMH|Gi3tpDxAt@z zIxw^{upQYGG5O)CsiKTBHzY2m1kY3QGz*x(@YH>tqEH&+j{$`QShtgX#KpS8pyzPFfMjeJ-SD Y@<)eNsm9UIDh@O}KR=(Jg@wTy0I>FIp8x;= diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_generationgui_functions.htm b/doc/salome/gui/GEOM/files/salome2_sp3_generationgui_functions.htm deleted file mode 100755 index 322971bfa..000000000 --- a/doc/salome/gui/GEOM/files/salome2_sp3_generationgui_functions.htm +++ /dev/null @@ -1,307 +0,0 @@ - - - - - -Titre - - - - - - - - - - - -

Generating complex objects

- -

Generation operations in GEOM are used to create advanced - geometrical objects (3D elements). They are:

- -

 

- - - -

 

- -

To use generation operations:

- -

 

- -

In the main menu select New - Entity > Generation.

- -

 

- -

Extrusion

- -

Description: - Creates an extruded shape.

- -

 

- -

Result: GEOM_Object - (edge, face, solid or compsolid).

- -

 

- -

TUI Command : - geompy.MakePrism(baseShape, Vector, - Height), where baseShape is a basis of the prism, Vector is a normal - of the prism and Height is a height of the prism.

- -

 

- -

Arguments: - Name + 1 shape (vertex, edge, wire, face or shell) serving as base object - + 1 vector (for direction) + 1 value (dimension).

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

Revolution

- -

- -

Description: - Creates an extruded shape by revolution.

- -

 

- -

Result: GEOM_Object - (edge, face, solid or compsolid).

- -

 

- -

TUI Command: - geompy.MakeRevolution(Shape, Axis, - Angle), where Shape is a shape to rotate, Axis is the axis of the - revolution and Angle is an angle by which Shape has to be rotated around - Axis.

- -

 

- -

Arguments: - Name + 1 shape (vertex, edge, wire, face or shell) serving as base object - + 1 vector (for direction) + 1 value (angle).

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

Filling

- -

 

- -

Description: - Creates a curving face using several curves.

- -

 

- -

Result: GEOM_Object - (face).

- -

 

- -

TUI Command: - geompy.MakeFilling(Shape, MinDegree, - MaxDegree, Tol2D, Tol3D, NbIter), where Shape is a shape to fill, - MinDegree and MaxDegree are correspondingly maximal and minimal degree, - Tol2D is a tolerance for 2D and Tol3D is a tolerance for 3D, NbIter is - a number of iterations.

- -

 

- -

Arguments: - Name + 1 List of edges + 5 Parameters (Min. degree, Max. degree, Number - of iterations, 2D tolerance, 3D tolerance).

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

Pipe

- -

- -

Description: - Creates an extruded shape.

- -

 

- -

Result: GEOM_Object - (edge, face, solid or compsolid).

- -

 

- -

TUI Command: - geompy.MakePipe(baseShape, pathShape), - where baseShape is a shape to be extruded, pathShape is a path along which - baseShape is extruded.

- -

 

- -

Arguments: - Name + 1 shape (vertex, edge, wire, face or shell) serving as base object - + 1 shape (edge, face or shell) for definition of the path.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- - - - diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_geomtoolsgui_functions.htm b/doc/salome/gui/GEOM/files/salome2_sp3_geomtoolsgui_functions.htm index 566fc05e7..ea1d1af6f 100755 --- a/doc/salome/gui/GEOM/files/salome2_sp3_geomtoolsgui_functions.htm +++ b/doc/salome/gui/GEOM/files/salome2_sp3_geomtoolsgui_functions.htm @@ -17,8 +17,8 @@ if (navigator.appName !="Netscape") p.whs1 { font-size:12pt; } img_whs2 { border:none; float:none; width:30px; height:30px; border-style:none; } p.whs3 { margin-left:40px; } -img_whs4 { border:none; width:557px; height:274px; float:none; border-style:none; } -img_whs5 { border:none; width:529px; height:272px; float:none; border-style:none; } +img_whs4 { border:none; width:425px; height:269px; float:none; border-style:none; } +img_whs5 { border:none; width:436px; height:269px; float:none; border-style:none; } -->

Importing/exporting geometrical objects

-

In GEOM you can import - and export geometrical objects from/into BREP, IGES, STEP In Geometry module you + can import and export geometrical objects from/into BREP, IGES, STEP files. The mechanisms of import and export are implemented via plug-ins, which gives you the opportunity to expand the range of available formats by adding more plug-ins (for example, CATIA @@ -98,14 +98,14 @@ else

 

-

+

 

Select the required file and click Open. Your file will be imported into - GEOM and its contents (geometrical object) will be displayed in the Object Browser.

+ style="font-weight: bold;">Open. Your file will be imported in + the module and its contents (geometrical object) will be displayed in + the Object Browser.

 

@@ -118,13 +118,13 @@ else

Select the object you wish to export, then from the File menu choose Export. In the opening dialog box Export define the required format the - name and the location of the file for exportation. + style="font-weight: bold;"> Export define the required format, + the name and the location of the file for exportation.

 

-

+

 

diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_measuregui_functions.htm b/doc/salome/gui/GEOM/files/salome2_sp3_measuregui_functions.htm index 0740b8917..e5b80916d 100755 --- a/doc/salome/gui/GEOM/files/salome2_sp3_measuregui_functions.htm +++ b/doc/salome/gui/GEOM/files/salome2_sp3_measuregui_functions.htm @@ -85,7 +85,7 @@ if (window.gbWhTopic) { if (window.addTocInfo) { - addTocInfo("GEOM module\nUsing measurement tools"); + addTocInfo("Geometry module\nUsing measurement tools"); addButton("show",BTN_TEXT,"Show","","","","",0,0,"","",""); } @@ -185,17 +185,6 @@ else

 

-

 

- -

Arguments: - 1 point.

- -

 

- -

Dialog Box:

- -

 

-

 

@@ -226,15 +215,6 @@ else

 

-

Arguments: - 1 shape.

- -

 

- -

Dialog Box:

- -

 

-

 

@@ -263,15 +243,6 @@ else

 

-

Arguments: - 1 shape.

- -

 

- -

Dialog Box:

- -

 

-

 

@@ -310,15 +281,6 @@ else Shape is a shape for which a matrix of inertia and moment of inertia are returned.

-

 

- -

Arguments: - 1 shape.

- -

 

- -

Dialog Box:

-

 

@@ -351,15 +313,6 @@ else

 

-

Arguments: - 1 shape.

- -

 

- -

Dialog Box:

- -

 

-

 

@@ -388,15 +341,6 @@ else

 

-

Arguments: - 2 shapes.

- -

 

- -

Dialog Box:

- -

 

-

 

@@ -426,15 +370,6 @@ else

 

-

Arguments: - 1 shape.

- -

 

- -

Dialog Box:

- -

 

-

 

@@ -463,15 +398,6 @@ else

 

-

Arguments: - 1 shape.

- -

 

- -

Dialog Box:

- -

 

-

 

@@ -500,15 +426,6 @@ else

 

-

Arguments: - 1 shape.

- -

 

- -

Dialog Box:

- -

 

-

 

@@ -565,20 +482,12 @@ else

 

-

TUI Command: geompy.CheckCompoundOfBlocks(Compound). +

TUI Command: + geompy.CheckCompoundOfBlocks(Compound). Checks if the shape is a valid compound of blocks. If it is true, then the validity flag is returned, and encountered errors are printed in the python console.

-

 

- -

Arguments: - 1 shape.

- -

 

- -

Dialog Box:

-

 

diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_operationgui_functions.htm b/doc/salome/gui/GEOM/files/salome2_sp3_operationgui_functions.htm deleted file mode 100755 index d67650a0a..000000000 --- a/doc/salome/gui/GEOM/files/salome2_sp3_operationgui_functions.htm +++ /dev/null @@ -1,637 +0,0 @@ - - - - - -Titre - - - - - - - - - - - - -

Basic operations

- -

In GEOM you can perform - basic operations with geometrical objects aimed at creation of more complex - shapes. These operations are:

- -

 

- - - -

 

- -

To perform basic operations on geometrical objects:

- -

 

- -

In the main menu select Operations.

- -

 

- -

 

- -

Partition

- -

 

- -

Description: - Builds a shape by intersection.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.MakePartition(ListOfShapes, - ListOfTools, ListOfKeepInside, ListOfRemoveInside, Limit, RemoveWebs, - ListOfMaterials), where ListOfShapes is a list of shapes to be - intersected, ListOfTools is a list of shapes to intersect the shapes from - ListOfShapes, ListOfKeepInside is a list of shapes outside which the results - will be deleted, ListOfRemoveInside is a list of shapes inside which the - results will be deleted, Limit is a type of the result shapes, if RemoveWebs - is True the Glue 3D algorithm will be performed on the results, ListOfMaterials - is a list of materials indices for each shape, it makes sense only if - RemoveWebs is True.

- -

 

- -

Arguments: - Up to 4 shapes + reconstruction limit.

- -
    - -

  • 1st - Constructor: Name + 2 shapes (first shape will be intersected by the - second shape) + reconstruction limit.

    • - -

  • 2nd - Constructor: Name + 1 shape which will be intersected + 1 cutting - face.

    • -
- -

 

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

Archimede

- -

 

- -

Description: - Creates a plane corresponding to the modeled water-line of the object - plunged into the water (in Z direction).

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.Archimede(Shape,Weight,WaterDensity,MeshingDeflection), - where Shape is a shape to put into the water, Weight is a weight of the - shape, WaterDensity  is - density of water, MeshingDeflection is a deflection of the mesh, using - to compute the section.

- -

 

- -

GUI Arguments: - Name + 1 shape  + - 3 values (Weight, Water Density & Meshing Deflection).

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

   

- -

 

- -

 

- -

Fillet

- -

 

- -

Description: - Make fillets of the edges of a shape.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.MakeFillet(Shape, Radius, - ShapeType, ListOfShapeID), where Shape is a shape to create a fillet - on, Radius is a radius of the fillet, ShapeType is a type of shapes to - be processed, ListOfShapeID is a list of subshapeÂ’s Ids to be processed.

- -

 

- -

Arguments:

- -
    - -

  • 1st - Constructor: Name + 1 shape + 1 value (fillet radius).

    • - -

  • 2nd - Constructor: Name + 1 shape + 1 Selection of edges + 1 value (Fillet - radius).

    • - -

  • 3rd - Constructor: Name + 1 shape + 1 Selection of faces + 1 value (Fillet - radius).

    • -
- -

 

- -

Dialog Box:

- -

 

- -

   

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

 

- -

Chamfer

- -

 

- -

Description: - Makes chamfer of the edges of a Shape.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: -

- -
    - -

  • geompy.MakeChamferEdge(Shape, - D1, D2, Face1, Face2), where Shape is a shape to create a chamfer - on, D1 is a chamfer size along Face1, D2 is a chamfer size along Face2, - Face1 and Face2 are indices of faces in Shape.

    • - -

  • geompy.MakeChamferFace(Shape, - D1, D2, ListOfFaceID), where Shape is a shape to create chamfer - on, D1 is a chamfer size along a face from  ListOfFaceID, -  D2 is a - chamfer size along two faces connected to the edge to which the chamfer - is applied, ListOfFaceID is a list of indices of faces in Shape.

    • -
- -

 

- -

Arguments:

- -

 

- -
    - -

  • 1st - Constructor : Name + 1 SHAPE + 1 value (Chamfer dimension).

    • - -

  • 2nd - Constructor : Name + 1 SHAPE + 2 faces + 2 values (Chamfer dimensions).

    • - -

  • 3rd - Constructor : Name + 1 SHAPE + 1 Selection of faces + 2 values (Chamfer - dimensions).

    • -
- -

 

- -

Dialog Box:

- -

 

- -

   

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

 

- -

 

- -

 

- -

 

- -

Block - multi-transformation

- -

 

- -

Description: - Makes several translations of a block (solid) in one - or two directions depending on - the arguments specified by the user.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: -

- -
    - -

  • geompy. - MakeMultiTransformation1D(Block, DirFaceID1, DirFaceID2, NbTimes), - where Block is a block to be transformed, DirFaceID1 is an ID of the face - which defines the first direction of transformation, DirFaceID2 is an - ID of the face which defines the second direction of transformation, NbTimes - is a numeber of transformations.

    • - -

  • geompy. - MakeMultiTransformation2D(Block, DirFaceID1U, DirFaceID2U, NbTimesU, DirFaceID1V, - DirFaceID2V, NbTimesV), where Block is a block to be transformed, - DirFaceID1U and DirFace1V are IDÂ’s of the faces, which define directions - of the first transformation, DirFaceID1V and DirFaceID2V are IDÂ’s of the - faces which define directions of the second transformation, NbTimesU and - NbTimesV are numbers of transformations.

    • -
- -

 

- -

Arguments:

- -

 

- -
    - -

  • 1D - transformation: Name + 1 hexahedral - solid + 1 or 2 faces + 1 integer (number of blocks)

    • - -

  • 2D - transformation: Name + 1 hexahedral - solid +

    • - -
      - -

    • 2 - faces and 1 integer, or

      • - -

    • 3 or 4 faces and 2 integers

      • -
    -
- -

 

- -

Dialog Box:

- - --- - - - -
-

 -

- -

 

- -

Example:

- -

 

- -

    

- -

 

- -

 

- -

Explode - on Blocks

- -

 

- -

Description: - Returns blocks of the given compound. The user may define the type blocks - to be extracted by setting the minimum and maximum number of faces in - the target block. By checking the corresponding box the user may also - interactively choose the blocks from a compound .

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.MakeBlockExplode(Compound, - MinNbFaces, MaxNbFaces), where Compound is a compound to be exploded - into the blocks, MinNbFaces, MaxNbFaces are correspondingly the minimal - and  the - maximal number of faces of the resulting blocks.

- -

 

- -

Arguments: 1 compound + 1 integer (min. and max. number - of faces in the block to be extracted).

- -

 

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

- -

 

- -

 

- -

 

- -

Propagate

- -

 

- -

Description: - Breaks a multitude of edges of a shape into groups (builds all possible - propagation groups).

- -

 

- -

Result: List - of GEOM_Objects. Each Geom Object will contain a group of edges.

- -

 

- -

TUI Command: - geompy.Propagate(Shape), - where Shape is a shape to build propagation groups on.

- -

 

- -

Arguments: 1 Shape.

- -

 

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

     

- - - - diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_primitivegui_functions.htm b/doc/salome/gui/GEOM/files/salome2_sp3_primitivegui_functions.htm deleted file mode 100755 index 96c0d677f..000000000 --- a/doc/salome/gui/GEOM/files/salome2_sp3_primitivegui_functions.htm +++ /dev/null @@ -1,395 +0,0 @@ - - - - - -Titre - - - - - - - - - - - -

Constructing primitives

- -

In - GEOM you can create different types of primitive geometrical objects (3D - elements):

- -

 

- - - -

 

- -

To construct primitive geometrical objects:

- -

 

- -

In the main menu select New - Entity > Primitives.

- -

 

- -

Box

- -

 

- -

Description: Creates a box.

- -

 

- -

Result: GEOM_Object (SOLID).

- -

 

- -

TUI Command : geompy.MakeBox(X1, - Y1, Z1, X2, Y2, Z2),  where - (X1, Y1, X2) and (X2, Y2, Z2) are coordinates of two points which define - a diagonal of the box.

- -

 

- -

Arguments:

- -
    - -

  • 1st Constructor - : Name + 2 vertices (opposite - corners of the box).

    • - -

  • 2nd Constructor - : Name + 3 values (dimensions - at origin).

    • -
- -

 

- -

Dialog Box:

- -

 

- -

 

- -

 

- -

Example:

- -

 

- -

- -

 

- -

 

- -

Cylinder

- -

 

- -

Description: Creates a cylinder.

- -

 

- -

Result: GEOM_Object (solid).

- -

 

- -

TUI Command: geompy.MakeCylinder(Point, - Axis, Radius, Height), where Point is a central point of the cylinder - base, Axis (vector value) is an axis of the cylinder, Radius and Height - are correspondingly a radius and a height of the cylinder.

- -

 

- -

Arguments:

- -
    - -

  • 1st Constructor: - Name + 1 vertex + 1 vector + 2 values - (Dimensions: radius and height).

    • - -

  • 2nd Constructor: - Name + 2 values (Dimensions at origin: - radius and height).

    • -
- -

 

- -

Dialog Box:

- -

 

- -

 

- -

 

- -

Example:

- -

 

- -

- -

 

- -

 

- -

Sphere

- -

 

- -

Description: Creates a sphere.

- -

 

- -

Result: GEOM_Object (solid).

- -

 

- -

TUI Command: geompy.MakeSphere(Point, - Radius), where Point is a center of the sphere and Radius is a - radius of the sphere.

- -

 

- -

Arguments:

- -
    - -

  • 1st Constructor - : Name + 1 vertex + 1 value - (Radius).

    • - -

  • 2nd Constructor - : Name + 1  value - (Radius from the origin).

    • -
- -

 

- -

Dialog Box:

- -

 

- -

 

- -

 

- -

Example:

- -

 

- -

- -

 

- -

 

- -

Torus

- -

 

- -

Description: Creates a torus.

- -

 

- -

Result: GEOM_Object (solid).

- -

 

- -

TUI Command: geompy.MakeTorus(Point, - Vector, RadiusMajor, RadiusMinor), where Point is a central point - of the torus, Vector is an axis of symmetry, RadiusMajor and RadiusMinor -  are correspondingly - a major and minor radiuses of the torus.

- -

 

- -

Arguments:

- -
    - -

  • 1st Constructor: - Name + 1 vertex + 1 vector (for - direction) + 2 values (1 & 2 Radius).

    • - -

  • 2nd Constructor: - Name + 2 values (1 & 2 Radius - from the origin).

    • -
- -

 

- -

Dialog Box:

- -

 

- -

 

- -

 

- -

Example:

- -

 

- -

- -

 

- -

 

- -

Cone

- -

 

- -

Description: Creates a cone.

- -

 

- -

Result: GEOM_Object (SOLID).

- -

 

- -

TUI Command: geompy.MakeCone(Point, - Axis, Radius1, Radius2), where Point is a central point of the - cone base, Axis (vector value) is an axis of the cone, Radius1 and Radius2 - are correspondingly the first and the second radiuses of the cone

- -

 

- -

Arguments:

- -
    - -

  • 1st Constructor: - Name + 1 vertex + 1 vector (for - direction) + 3 values (Radius of the base part, radius of the upper part, - height).

    • - -

  • 2nd Constructor: - Name + 3 values (Radius of the base - part, radius of the upper part, height).

    • -
- -

 

- -

Dialog Box:

- -

 

- -

 

- -

 

- -

Example:

- -

 

- -

- - - - diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_repairgui_functions.htm b/doc/salome/gui/GEOM/files/salome2_sp3_repairgui_functions.htm deleted file mode 100755 index 56d2c9c22..000000000 --- a/doc/salome/gui/GEOM/files/salome2_sp3_repairgui_functions.htm +++ /dev/null @@ -1,898 +0,0 @@ - - - - - -Titre - - - - - - - - - - - - -

Repairing geometrical objects

- -

Repairing operations are - used for adjustment and modification of created geometrical shapes. The - are:

- -

 

- - - -

 

- -

The operations Suppress - faces, Close contour, Suppress internal wires, Suppress holes and - Add point on edge are - available only if you are using OCC - viewer.

- -

 

- -

To apply repairing operations:

- -

 

- -

In the main menu select Repair - submenu.

- -

 

- -

Shape - processing

- -

 

- -

Description: - Processes a shape using various operators.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.ProcessShape(Shape, Operators, - Parameters, Values), where Shape is a processed shape, Operators - is a list of names of operators ("FixShape", "SplitClosedFaces", - etc.), Parameters is a list of names of parameters (“FixShape.Tolerance3d”, - etc), Values is a list of values of parameters in the same order as the - Parameters list.

- -

 

- -

Arguments: - 1 or more shapes.

- - - --- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-

1

 -

SplitAngle – - this operator is intended for splitting faces based on conical surfaces, - surfaces of revolution and cylindrical surfaces by angle

-

SplitAngle.Angle – angle (in radians) defining - size of result segments.

-

SplitAngle.MaxTolerance – maximal possible - tolerance on result shape

-

2

 -

SplitClosedFaces - – this operator is intended for dividing all closed faces in the shape - according to the number of points.

-

SplitClosedFaces.NbSplitPoints – number of - points for cutting each closed faces.

-

3

 -

FixFaceSize - – this operator is intended for removing small faces (case of the spot - face and strip face)

-

FixFaceSize.Tolerance – work tolerance defining - which faces will be removed.

-

4

 -

DropSmallEdges - – this operator is intended for removing small edges or merging with neigbour. -  

-

DropSmallEdges.Tolerance3d – work tolerance - for detection and removing small edges.

-

5

 -

BsplineRestriction - –this operator is intended for re-approximation BSplines curves and surfaces - or conversion of the curves and surfaces to BSplines with specified parameters. -

-

BSplineRestriction.SurfaceMode - mode of approximation - of surfaces if restriction is necessary

-

BSplineRestriction.Curve3dMode -mode of conversion - of any 3D curve to BSpline and approximation.

-

BSplineRestriction.Curve2dMode - mode of conversion - of any 2D curve to BSpline and approximation

-

BSplineRestriction.Tolerance3d – work tolerance - for definition of the possibility of the approximation of the surfaces - and 3D curves with specified parameters.

-

BSplineRestriction.Tolerance2d - work tolerance - for definition of the possibility of the approximation of the 2D curves - with specified parameters.

-

BSplineRestriction.Continuity3d – desired continuity - of the resultant surfaces and 3D curves.

-

BSplineRestriction.Continuity2d – desired continuity - of the resultant 2D curves.

-

BSplineRestriction.RequiredDegree - required - degree of the resultant BSplines

-

BSplineRestriction.RequiredNbSegments - required - maximum number of segments of resultant BSplines.

-

6

 -

SplitContinuity - – this operator is intended for splitting shapes to achieve continuities - of curves and surfaces less than specified ones.

-

SplitContinuity.Tolerance3d - 3D tolerance - for correction of geometry.

-

SplitContinuity.SurfaceContinuity - required - continuity for surfaces.

-

SplitContinuity.CurveContinuity - required - continuity for curves.

-

7

 -

ToBezier - this - operator is intended for conversion of the curves and surfaces of the - all types into Bezier curves and surfaces.

-

ToBezier.SurfaceMode - mode of conversion of - the surfaces.

-

ToBezier.Curve3dMode – mode for conversion - of the 3D curves.

-

ToBezier.Curve2dMode – mode for conversion - of the 2D curves.

-

ToBezier.MaxTolerance – max possible tolerance - on the resultant shape.

-

8

 -

FixShape – this - operator is intended for correction of the invalid shapes

-

FixShape.Tolerance3d – work tolerance for detection - of the problems and correction of them.

-

FixShape.MaxTolerance3d - maximal possible - tolerance of the shape after correction.

-

9

 -

SameParameter - – this operator is intended for fixing edges having not same parameter - 2D and 3D curves.

-

SameParameter.Tolerance3d – tolerance for detection - and fix problems.

- -

 

- -

 

- -

Dialog Box:

- -

 

- -

 

- -

 

- -

Example:

- -

 

- -

Shape before applying Shape Processing (FixShape - operator).

- -

 

- -

   

- -

 

- -

The - same shape after applying Shape Processing.

- -

 

- -

- -

 

- -

 

- -

Suppress faces

- -

 

- -

Description: - Suppresses a face of a shape.

- -

 

- -

Result: GEOM_Object - (ListOfGeomShapes).

- -

 

- -

TUI Command: - geompy.SuppressFaces(Shape, ListOfID), - where Shape is a shape to be processed, ListOfID is a list of faces ID's - to be removed.

- -

 

- -

Arguments: - Name + Faces which should be removed (you can select them in the 3D viewer).

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

Close contour

- -

 

- -

Description : - Closes an open contour and modifies the underlying face (if needed) in - accordance with user specified mode:

- -
    - -

  • By common vertex – a - vertex is created between the end points of the contour and its tolerance - is increased to a value of the gap between the ends of the contour;

    • - -

  • By new edge – a new edge - is inserted between the end points of the contour.

    • -
- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.CloseContour(Shape, Wires, - IsCommonVertex), where Shape is a shape to be processed, Wires - is a list of edges or wires IDÂ’s which has to be closed within the shape - (if the list contains only one element = -1, the shape itself is considered - as a wire),  IsCommonVertex - if this parameter is True a closure has to be done by creation of a common - vertex, otherwise an edge is added between the end vertices.

- -

 

- -

Arguments: Name + 1 shape + contour (Wire, - or a set of Edges) + mode of closure (by vertex or by edge)

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

Suppress - internal wires

- -

 

- -

Description : - Removes all internal wires or specified internal wires from user specified - faces.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.SuppressInternalWires(Shape, - Wires), where Shape is a shape where wires are to be removed, Wires - is a list of wires IDÂ’s to be removed; if the list is empty then all internal - wires are removed.

- -

 

- -

 

- -

Arguments:

- -
    - -

  • Name of the resulting - object

    • - -

  • User specified face

    • - -

  • User specified internal - wires (lying on this face except for its boundary), or, in case the Remove all internal wires box is checked, - all internal wires

    • -
- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

   

- -

 

- -

 

- -

Suppress - holes

- -

 

- -

Description : -

- -
    - -

  • 1st - Constructor : Suppresses a hole in a shape.

    • - -

  • 2nd - Constructor : Suppresses a hole in a face.

    • -
- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.SuppressHoles(Shape, - ListOfWireID), where Shape is a - shape where holes must be removed, ListOfWireID is a list of wire sub - shapes IDÂ’s. If it is empty, then all holes are removed.

- -

 

- -

Arguments: Name - + 1 shape + Wires which should be removed.

- -

Remove all - holes checkbox allows to fill all holes of a definite shape.

- -

Detect button - allows to display the number of free boundaries in your shape:

- -

 

- -

- -

 

- -

Dialog Box:

- -

 

- -

 

- -

  

- -

Example:

- -

 

- -

   

- -

 

- -

 

- -

 

- -

Sewing

- -

 

- -

Description: - Sew several  shapes.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command : - geompy.MakeSewing(ListOfShape, Precision), - where ListOfShape is list of shapes to be sewed, Precision is a precision - for sewing.

- -

 

- -

Arguments: - Name + 1 or more shapes + 1 value (sew precision).

- -

Detect - button allows to display the number of free boundaries in your - shape:

- -

 

- -

- -

 

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

 

- -

 

- -

Add point on edge

- -

 

- -

Description: - Splits an edge in two in accordance with the specified mode (by length - or by parameter) and a value specifying the position of the point on edge - (for example val =0.5; mode = Length).

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command : - geompy.DivideEdge(Shape, EdgeID, - Value, IsByParameter), where Shape is a shape which contains an - edge to be divided, EdgeID is the ID of the edge to be divided, if it - = -1, then Shape is an edge, Value is a paramter on the edge or a length. - IsByParameter if it is True then Value is the edge parameter in the range - [0:1] otherwise it is a length of the edge in the range [0:1]

- -

 

- -

Arguments: - Name + 1 Edge + 1 value setting the position of the point according to - one of the selected modes

- -

 

- -

Dialog - Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

     

- -

 

- -

 

- -

 

- -

Glue faces

- -

 

- -

Description: - Glues faces that are coincident with respect to the given tolerance

- -

value.

- -

 

- -

Result: - GEOM_Object.

- -

 

- -

TUI Command - : geompy.MakeGlueFaces(theShape, - theTolerance), where theShape is a compound of shapesto be glued, - theTolerance is a maximum distance between two faces, which can be considered - as coincident.

- -

 

- -

Arguments: - Name + 1 Compound - + Tolerance value

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

  

- -

 

- -

 

- -

 

- -

Check free boundaries

- -

 

- -

Description: - Detects wires and edges that correspond to the shape's boundary, and highlights - it

- -

 

- -

Result: GEOM_Object. -

- -

 

- -

TUI Command : (NoError, ClosedWires, OpenWires) = geompy.GetFreeBoundary(Shape), - where Shape is a shape to be checked, NoError is false if an error occurred - while checking free boundaries, ClosedWires is a list of closed free boundary - wires, OpenWires is a list of open free boundary wires.

- -

 

- -

Arguments: - Shape

- -

 

- -

Dialog - Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

  

- -

 

- -

 

- -

 

- -

Check free - faces

- -

 

- -

Description: - Retrieves all free faces from a given shape. A free face is - a face not shared between two shells of the shape.

- -

 

- -

Result: GEOM_Object. - Returns a list of IDs of all free faces, contained in the shape.

- -

 

- -

TUI Command : GetFreeFacesIDs(Shape), where - Shape is a shape to be checked.

- -

 

- -

Arguments: - Shape

- -

 

- -

Dialog - Box:

- -

 

- -

- -

 

- -

 

- - - - diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_transformationgui_functions.htm b/doc/salome/gui/GEOM/files/salome2_sp3_transformationgui_functions.htm deleted file mode 100755 index 956e7ec71..000000000 --- a/doc/salome/gui/GEOM/files/salome2_sp3_transformationgui_functions.htm +++ /dev/null @@ -1,669 +0,0 @@ - - - - - -Titre - - - - - - - - - - - - -

Using transformation operations

- -

In GEOM there is a set - of operations allowing to transform the initial geometrical object into - other objects, which will be also created. These operations are

- -

 

- - - -

 

- -

All these operations are accessible in the - main menu, via Operations / Transformation.

- -

 

- -

Translation

- -

 

- -

Description: - Makes a translation of a shape.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.MakeTranslation(Shape, DX, - DY, DZ), where Shape is a shape to be translated, DX, DY, DZ are - components of translation vector.

- -

 

- -

Arguments: -

- -
    - -

  • 1st - Constructor: Name + 1 shape - + 3 values (coordinates).

    • - -

  • 2st - Constructor: Name + 1 shape - + 2 vertices.

    • - -

  • 3st - Constructor: Name + 1 shape - + 1 vector.

    • -
- -

 

- -

Create a copy - checkbox allows to keep the initial object, otherwise it will be - removed.

- -

 

- -

Dialog Box:

- -

 

- -

   

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

Rotation -

- -

 

- -

Description: - Rotates the initial shape.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.MakeRotation(Shape, Axis, - Angle), where Shape is a shape to be rotated, Axis is an axis of - rotation, Angle is an angle of rotation.

- -

 

- -

Arguments: - 1 shape + 1 vector for direction of rotation + 1 angle.

- -

Reverse checkbox - allows to specify the direction of rotation.

- -

Create a copy - checkbox allows to keep the initial object, otherwise it will be - removed.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

 

- -

Modify the Location

- -

 

- -

Description: - Modification of location of an object.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.MakePosition(theObject, theStartLCS, theEndLCS), where theObject - is a shape, location of which is modified, theStartLCS is a location to - move the shape from, theEndLCS is a location to move the shape to.

- -

 

- -

Arguments: - Name + 1 GEOM_Object + [Starting Coordinate System] + End Coordinate System.

- -

Create a copy - checkbox allows to keep the initial object, otherwise it will be - removed.

- -

 

- -

Dialog Box:

- -

 

- -

  

- -

 

- -

Example:

- -

 

- -

- -

 

- -

 

- -

 

- -

Mirror -

- -

 

- -

Description: - Symmetrical copy of a shape.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.MakeMirrorByPlane(Shape, - Plane), where Shape is a shape to be mirrored, Plane is a plane - of symmetry.

- -

 

- -

Arguments: -

- -
    - -

  • 1st - Constructor: Name + 1 shape - + 1 vertex.

    • - -

  • 2st - Constructor: Name + 1 shape - + 1 vector.

    • - -

  • 3st - Constructor: Name + 1 shape - + 1 plane.

    • -
- -

Create a copy - checkbox allows to keep the initial object, otherwise it - will be removed.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

Scale transform -

- -

 

- -

Description: - Creates a scaled shape basing on the initial shape.

- -

 

- -

Result: GEOM_Object.

- -

 

- -

TUI Command: - geompy.MakeScaleTransform(Shape, - CenterOfScale, Factor), where Shape is a shape to be scaled, CenterOfScale - is a center point of scale, Factor is a factor of the scale.

- -

 

- -

Arguments: - Name + 1 shape(s) + 1 vertex + 1 Scale Factor.

- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

 

- -

 

- -

 

- -

Offset surface

- -

 

- -

Description: - Each point is translated along a local normal by a given distance (signed - number, negative value meaning inner offset). Offset operation is applicable - to faces, shells and solids.

- -

 

- -

Result: GEOM_Object -

- -

 

- -

TUI Command: - geompy.MakeOffset(Shape, Offset), - where Shape is a shape which has to be an offset, Offset is a value of - the offset.

- -

 

- -

Arguments:

- -
    - -

  • Name of the resulting - object

    • - -

  • GEOM_Object (face, shell, - solid, compound)

    • - -

  • offset value

    • -
- -

 

- -

Dialog Box:

- -

 

- -

- -

 

- -

Example:

- -

- -

 

- -

 

- -

Multi-Translation

- -

 

- -

Description: - Makes several translations of a shape in one - or two directions.

- -

 

- -

Result: GEOM_Object - (compound).

- -

 

- -

TUI Command:

- -
    - -

  • geompy.MakeMultiTranslation1D(Shape, - Dir, Step, NbTimes), where Shape is a shape to be translated, Dir - is a direction of translation, Step is a step of the translation, NbTimes - is a number of times the shape must be moved.

    • - -

  • geompy.MakeMultiTranslation2D(Shape, - Dir1, Step1, NbTimes1, Dir2, Step2, NbTimes2), where Shape is a - shape to be translated, Dir1 is the first direction of translation, Step1 - of the first translation, NbTimes1 is a number of translations to be done - along, Dir2 is the second direction of translation, Step2 of the second - translation, NbTimes2 is a number of translations to be done along Dir2.

    • -
- -

 

- -

Arguments:

- -
    - -

  • 1st - Constructor (in one direction): - Name + 1 shape + 1 vector (for direction) + 1 step value + 1 value (repetition).

    • - -

  • 2nd - Constructor (in two directions): - Name + 1 shape + 2 vectors defining the direction + 2 step values + 2 - values (repetitions).

    • -
- -

 

- -

Dialog Box:

- -

 

- -

 

- -

 

- -

Example:

- -

 

- -

One direction:

- -

 

- -

 

- -

 

- -

Two directions:

- -

 

- -

 

- -

 

- -

 

- -

Multi-Rotation

- -

 

- -

Description: - Creates several rotated geometrical objects in one - or two directions - basing on the initial geometrical object.

- -

 

- -

Result: GEOM_Object - (compound).

- -

 

- -

TUI Command:

- -
    - -

  • geompy.MakeMultiRotation1D(Shape, - Axis, NbTimes), where Shape is a shape to be rotated, Axis is an - Axis of rotation, NbTimes is a number of the shape must be rotated.

    • - -

  • geompy.MakeMultiRotation2D(Shape, - Axis, Angle, NbTimes1, Step, NbTimes2), where Shape is a shape - to be rotated, Axis is an axis of rotation, Angle is an angle of rotation, - NbTimes1 is a number of rotation, Step is a step of translation, NbTimes2 - is a number of translation.

    • -
- -

 

- -

Arguments:

- -
    - -

  • 1st - Constructor (in one direction): - Name + 1 shape + 1 vector for direction + 1 value (repetition).

    • - -

  • 2nd - Constructor (in two directions): - Name + 1 shape + 1 vector for direction + 1 angle + 1 value (repetition) - + 1 step value + 1 value (repetition); Reverse - checkbox allows to set the direction of rotation.

    • -
- -

 

- -

Dialog Box:

- -

 

- -

 

- -

 

- -

Example:

- -

 

- -

One direction:

- -

 

- -

 

- -

 

- -

Two directions:

- -

 

- -

 

- -

 

- -

 

- - - - diff --git a/doc/salome/gui/GEOM/files/salome2_sp3_transformationgui_functions_salome2_sp3_transformationgui_functions_image130.gif b/doc/salome/gui/GEOM/files/salome2_sp3_transformationgui_functions_salome2_sp3_transformationgui_functions_image130.gif deleted file mode 100755 index 980336276f002e4f2cf9d0fcb143de5b6284b1be..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 935 zcmZ?wbhEHb6k!ly_|5y)HW1X7zawZj< zmzf+*y6HL3O`8b#?YMjBzoN@Qm*4JT+Sqo=f;b>Uovy5fksuZoSiw`pv MJhT#(5MZzd05OzH&Hw-a diff --git a/doc/salome/gui/GEOM/fillet.htm b/doc/salome/gui/GEOM/fillet.htm index cfcad978c..569f96b9a 100755 --- a/doc/salome/gui/GEOM/fillet.htm +++ b/doc/salome/gui/GEOM/fillet.htm @@ -16,10 +16,10 @@ if (navigator.appName !="Netscape") - - - + - - - - - -

1 - -

SplitAngle – - this operator is intended for splitting faces based on conical surfaces, - surfaces of revolution and cylindrical surfaces by angle

-

SplitAngle.Angle – angle (in radians) defining - size of result segments.

-

SplitAngle.MaxTolerance – maximal possible - tolerance on result shape - - - -

2 - -

SplitClosedFaces - – this operator is intended for dividing all closed faces in the shape - according to the number of points.

-

SplitClosedFaces.NbSplitPoints – number of - points for cutting each closed faces. - - - -

3 - -

FixFaceSize - – this operator is intended for removing small faces (case of the spot - face and strip face)

-

FixFaceSize.Tolerance – work tolerance defining - which faces will be removed. - - - -

4 - -

DropSmallEdges - – this operator is intended for removing small edges or merging with neigbour. -  

-

DropSmallEdges.Tolerance3d – work tolerance - for detection and removing small edges. - - - -

5 - -

BsplineRestriction - –this operator is intended for re-approximation BSplines curves and surfaces - or conversion of the curves and surfaces to BSplines with specified parameters. -

-

BSplineRestriction.SurfaceMode - mode of approximation - of surfaces if restriction is necessary

-

BSplineRestriction.Curve3dMode -mode of conversion - of any 3D curve to BSpline and approximation.

-

BSplineRestriction.Curve2dMode - mode of conversion - of any 2D curve to BSpline and approximation

-

BSplineRestriction.Tolerance3d – work tolerance - for definition of the possibility of the approximation of the surfaces - and 3D curves with specified parameters.

-

BSplineRestriction.Tolerance2d - work tolerance - for definition of the possibility of the approximation of the 2D curves - with specified parameters.

-

BSplineRestriction.Continuity3d – desired continuity - of the resultant surfaces and 3D curves.

-

BSplineRestriction.Continuity2d – desired continuity - of the resultant 2D curves.

-

BSplineRestriction.RequiredDegree - required - degree of the resultant BSplines

-

BSplineRestriction.RequiredNbSegments - required - maximum number of segments of resultant BSplines. - - - -

6 - -

SplitContinuity - – this operator is intended for splitting shapes to achieve continuities - of curves and surfaces less than specified ones.

-

SplitContinuity.Tolerance3d - 3D tolerance - for correction of geometry.

-

SplitContinuity.SurfaceContinuity - required - continuity for surfaces.

-

SplitContinuity.CurveContinuity - required - continuity for curves. - - - -

7 - -

ToBezier - this - operator is intended for conversion of the curves and surfaces of the - all types into Bezier curves and surfaces.

-

ToBezier.SurfaceMode - mode of conversion of - the surfaces.

-

ToBezier.Curve3dMode – mode for conversion - of the 3D curves.

-

ToBezier.Curve2dMode – mode for conversion - of the 2D curves.

-

ToBezier.MaxTolerance – max possible tolerance - on the resultant shape. - - - -

8 - -

FixShape – this - operator is intended for correction of the invalid shapes

-

FixShape.Tolerance3d – work tolerance for detection - of the problems and correction of them.

-

FixShape.MaxTolerance3d - maximal possible - tolerance of the shape after correction. - - - -

9 - -

SameParameter - – this operator is intended for fixing edges having not same parameter - 2D and 3D curves.

-

SameParameter.Tolerance3d – tolerance for detection - and fix problems. - - +

In this dialog box you can select the object + that you need to process, define its name and operators applied to it + during processing.

+ +

 

+ +

+ +

 

+ +

Operators and Parameters (TUI names are given in brackets)

 

+
    + +

  • Fix + Shape (FixShape) - corrects invalid shapes.

    • + +

  • 3D Tolerance (FixShape.Tolerance3d) + - work tolerance for detection of the problems and correction of them.

    • + +

  • Max 3D Tolerance (FixShape.MaxTolerance3d) +  - maximal + possible tolerance of the shape after correction.

    • + +

  • Fix Face Size (FixFaceSize) - removes + small faces, such as spots and strips.

    • + +

  • Tolerance (FixFaceSize.Tolerance) - + defines minimum possible face size.

    • + +

  • Drop Small Edges (DropSmallEdges) - + removes edges, which merge with neighbouring edges.

    • + +

  • 3D Tolerance (DropSmallEdges.Tolerance3d) + - defines minimum possible distance between two parallel edges.

    • + +

  • Split Angle (SplitAngle) - splits faces + based on conical surfaces, surfaces of revolution and cylindrical surfaces + in segments using a certain angle .  

    • + +

  • Angle (SplitAngle.Angle) - the central + angle of the resulting segments (i.e. we obtain two segments if Angle=180, + four if Angle=90, etc).

    • + +

  • Max. Tolerance (SplitAngle.MaxTolerance) + - maximum possible tolerance among the resulting segments.

    • + +

  • Split Closed Faces + (SplitClosedFaces) - splits + closed faces in segments. The number of segments depends on the number + of splitting points.

    • + +

  • Number of splitting points (SplitClosedFaces.NbSplitPoints) + - the number of splitting points.

    • + +

  • Split Continuity (SplitContinuity) - splits shapes to reduce + continuities of curves and surfaces.

    • + +

  • 3D Tolerance + (SplitContinuity.Tolerance3d) - 3D tolerance for correction of geometry.

    • + +

  • Surface Continuity (SplitContinuity.SurfaceContinuity) - required + continuity for surfaces.

    • + +

  • Curve Continuity (SplitContinuity.CurveContinuity) + - required continuity for curves.

    • +
+ +

This and the previous parameters can + take the following values:

+ +

Parametric Continuity +

+ +

C0 + (Positional Continuity): curves are joined (the end positions of curves + or surfaces are coincidental. The curves or surfaces may still meet at + an angle, giving rise to a sharp corner or edge).

+ +

C1 + (Tangential Continuity): first derivatives are equal (the end vectors + of curves or surfaces are parallel, ruling out sharp edges).

+ +

C2 + (Curvature Continuity): first and second derivatives are equal (the end + vectors of curves or surfaces are of the same magnitude).

+ +

CN + N-th derivatives are equal (both the direction and the magnitude of the + Nth derivatives of curves or surfaces (d/du C(u)) are the same at junction.

+ +

Geometric Continuity

+ +

G1: + first derivatives are proportional at junction

+ +

The curve tangents thus have the same + direction, but not necessarily the same magnitude. i.e., C1'(1) = (a,b,c) + and C2'(0) = (k*a, k*b, k*c).

+ +

G2: + first and second derivatives are proportional at junction

+ +

As the names imply, geometric continuity + requires the geometry to be continuous, while parametric continuity requires + that the underlying parameterization was continuous as well.

+ +

Parametric continuity of order n implies + geometric continuity of order n, but not vice-versa.

+ +
    + +

  • Bspline + Restriction (BsplineRestriction) - converts curves and surfaces + to Bsplines and processes them with the following parameters:

    • + +

  • Surface Mode + (BSplineRestriction.SurfaceMode) - approximation of surfaces if restriction + is necessary.

    • + +

  • 3D Curve Mode (BSplineRestriction.Curve3dMode) - conversion + of any 3D curve to BSpline and approximation.

    • + +

  • 2D Curve Mode (BSplineRestriction.Curve2dMode) - + conversion of any 2D curve to BSpline + and approximation.

    • + +

  • 3D + Tolerance (BSplineRestriction.Tolerance3d) - defines the possibility + of surfaces and 3D curves approximation with the specified parameters.

    • + +

  • 2D + Tolerance (BSplineRestriction.Tolerance2d) - defines the possibility + of surfaces and 2D curves approximation with the specified parameters.

    • + +

  • Required + Degree (BSplineRestriction.RequiredDegree) - required degree of + the resulting BSplines.

    • + +

  • Required + number of segments (BSplineRestriction.RequiredNbSegments) - required + maximum number of segments of resultant BSplines

    • + +

  • 3D + Continuity (BSplineRestriction.Continuity3d) - continuity of the + resulting surfaces and 3D curves.

    • + +

  • 2D + Continuity (BSplineRestriction.Continuity2d) - continuity of the + resulting 2D curves.

    • + +

  • To Bezier (ToBezier) - converts curves + and surfaces of any type to Bezier curves and surfaces.

    • + +

  • Surface Mode + (ToBezier.SurfaceMode) - if checked in, allows conversion of surfaces.

    • + +

  • 3D Curve Mode (ToBezier.Curve3dMode) - if checked in, allows + conversion of 2D curves.

    • + +

  • 2D Curve Mode (ToBezier.Curve2dMode) - if checked in, allows + conversion of 3D curves.

    • + +

  • Max Tolerance (ToBezier.MaxTolerance) - defines + tolerance for detection and correction + of problems.

    • + +

  • Same Parameter (SameParameter) –  fixes + edges of 2D and 3D curves not having the same parameter.

    • + +

  • 3D Tolerance (SameParameter.Tolerance3d) + – defines tolerance for fixing + of edges.

    • +
+

 

Dialog Box:

 

-

 

+

+ +

 

 

@@ -272,20 +353,20 @@ if ((navigator.appName == "Netscape") && (parseInt(navigator.appVersion) == 4))

 

-

   

+

   

-

 

+

 

-

The +

The same shape after applying Shape Processing.

-

 

+

 

-

+

-

 

+

 

-

Our +

Our TUI Scripts provide you with useful examples of the use of Repairing Operations.

diff --git a/doc/salome/gui/GEOM/shell.htm b/doc/salome/gui/GEOM/shell.htm index df6d6ee37..5ea4603ba 100755 --- a/doc/salome/gui/GEOM/shell.htm +++ b/doc/salome/gui/GEOM/shell.htm @@ -50,7 +50,7 @@ if (window.gbWhTopic) { if (window.addTocInfo) { - addTocInfo("GEOM module\nCreating geometrical objects\nCreation of Advanced Geometrical Objects\nShell"); + addTocInfo("Geometry module\nCreating geometrical objects\nCreating Advanced Geometrical Objects\nShell"); addButton("show",BTN_TEXT,"Show","","","","",0,0,"","",""); } @@ -89,7 +89,7 @@ else

The Result will be a  GEOM_Object - (SHELL).

+ (shell).

 

diff --git a/doc/salome/gui/GEOM/sketcher.htm b/doc/salome/gui/GEOM/sketcher.htm index 37f343ff1..0064487dd 100755 --- a/doc/salome/gui/GEOM/sketcher.htm +++ b/doc/salome/gui/GEOM/sketcher.htm @@ -68,7 +68,7 @@ if (window.gbWhTopic) { if (window.addTocInfo) { - addTocInfo("GEOM module\nCreating geometrical objects\nSketcher"); + addTocInfo("Geometry module\nCreating geometrical objects\nSketcher"); addButton("show",BTN_TEXT,"Show","","","","",0,0,"","",""); } @@ -118,7 +118,7 @@ else

The Result of - the operation will be a GEOM_Object.

+ the operation will be a GEOM_Object.

 

diff --git a/doc/salome/gui/GEOM/sketcher_tui.htm b/doc/salome/gui/GEOM/sketcher_tui.htm index f191ae610..8ddccff64 100755 --- a/doc/salome/gui/GEOM/sketcher_tui.htm +++ b/doc/salome/gui/GEOM/sketcher_tui.htm @@ -47,7 +47,7 @@ if (window.gbWhTopic) { if (window.addTocInfo) { - addTocInfo("GEOM module\nTUI Scripts\nCreation of Geometric Objects\nSketcher"); + addTocInfo("Geometry module\nTUI Scripts\nCreating Geometric Objects\nSketcher"); addButton("show",BTN_TEXT,"Show","","","","",0,0,"","",""); } diff --git a/doc/salome/gui/GEOM/solid.htm b/doc/salome/gui/GEOM/solid.htm index f8f08688e..be8ddbf20 100755 --- a/doc/salome/gui/GEOM/solid.htm +++ b/doc/salome/gui/GEOM/solid.htm @@ -17,23 +17,11 @@ if (navigator.appName !="Netscape") img_whs1 { width:20px; height:20px; border-style:none; } p.whs2 { font-size:12pt; } p.whs3 { font-size:12pt; font-weight:bold; } -p.whs4 { font-size:12pt; margin-left:0px; } +p.whs4 { font-size:12pt; margin-left:40px; } img_whs5 { border:none; width:312px; height:315px; float:none; border-style:none; } -p.whs6 { font-size:12pt; margin-left:40px; } -img_whs7 { border:none; width:215px; height:190px; float:none; border-style:none; } +img_whs6 { border:none; width:215px; height:190px; float:none; border-style:none; } --> - - diff --git a/doc/salome/gui/GEOM/whdata/whfwdata0.htm b/doc/salome/gui/GEOM/whdata/whfwdata0.htm index f3f18a8fd..bf9cf21c5 100755 --- a/doc/salome/gui/GEOM/whdata/whfwdata0.htm +++ b/doc/salome/gui/GEOM/whdata/whfwdata0.htm @@ -12,1280 +12,1337 @@ diff --git a/doc/salome/gui/GEOM/whdata/whtdata0.htm b/doc/salome/gui/GEOM/whdata/whtdata0.htm index ff33c3846..1065097ba 100755 --- a/doc/salome/gui/GEOM/whdata/whtdata0.htm +++ b/doc/salome/gui/GEOM/whdata/whtdata0.htm @@ -8,18 +8,11 @@ -

Display Mode

+

Display Mode

 

-

To change the display mode right-click on +

To change the display mode right-click on this geometrical object in the viewer and from the pop-up menu select Display mode --> Wireframe or Shading.

-

 

+

 

-

TUI +

TUI Command: gg.setDisplayMode(ID, Short)

-

 

+

 

-

Examples:

+

Examples:

-

 

+

 

-

Wireframe                                                                                       

+

Wireframe                                                                                       

-

 

+

 

-

Shading

+

Shading

-

+

-

  

+

  

-

Our TUI Scripts provide you with useful examples +

Our TUI Scripts provide you with useful examples of Changing Display Parameters.

diff --git a/doc/salome/gui/GEOM/working_plane.htm b/doc/salome/gui/GEOM/working_plane.htm index 8b8c33f30..758235c48 100755 --- a/doc/salome/gui/GEOM/working_plane.htm +++ b/doc/salome/gui/GEOM/working_plane.htm @@ -16,9 +16,10 @@ if (navigator.appName !="Netscape")

Working with groups

-

The Salome platform offers - such a useful functionality as creation and editing groups of subshapes - of a geometrical object which makes handling subshapes much easier. However - the functionality is available in the OCC viewer only.

+

Creation and editing groups of subshapes of a geometrical object makes + handling subshapes much easier. This functionality is available in OCC + viewer only.

 

@@ -117,7 +117,7 @@ else

 

-

+

 

@@ -163,7 +163,7 @@ else

 

-

The +

The Result of the operation will be a GEOM_Object.

@@ -206,7 +206,7 @@ else

 

-

The +

The Result of the operation will be a GEOM_Object.

@@ -244,7 +244,7 @@ else

 

-

+

 

diff --git a/doc/salome/tui/GEOM/doxyfile b/doc/salome/tui/GEOM/doxyfile index 55a225264..fbab9009d 100755 --- a/doc/salome/tui/GEOM/doxyfile +++ b/doc/salome/tui/GEOM/doxyfile @@ -1,64 +1,85 @@ -# Doxyfile 1.3-rc1 +# Doxyfile 1.4.6 #--------------------------------------------------------------------------- -# General configuration options +# Project related configuration options #--------------------------------------------------------------------------- -PROJECT_NAME = "SALOME - GEOM - v.3.2.0b1" -PROJECT_NUMBER = id#1.1 +PROJECT_NAME = "SALOME - GEOM - v.version" +PROJECT_NUMBER = OUTPUT_DIRECTORY = ../ +CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English +USE_WINDOWS_ENCODING = NO +BRIEF_MEMBER_DESC = YES +REPEAT_BRIEF = NO +ABBREVIATE_BRIEF = +ALWAYS_DETAILED_SEC = YES +INLINE_INHERITED_MEMB = YES +FULL_PATH_NAMES = YES +STRIP_FROM_PATH = ../../../share/salome \ + ../../../build/salome +STRIP_FROM_INC_PATH = +SHORT_NAMES = NO +JAVADOC_AUTOBRIEF = YES +MULTILINE_CPP_IS_BRIEF = NO +DETAILS_AT_TOP = NO +INHERIT_DOCS = YES +SEPARATE_MEMBER_PAGES = NO +TAB_SIZE = 5 +ALIASES = +OPTIMIZE_OUTPUT_FOR_C = YES +OPTIMIZE_OUTPUT_JAVA = YES +BUILTIN_STL_SUPPORT = NO +DISTRIBUTE_GROUP_DOC = NO +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- EXTRACT_ALL = YES EXTRACT_PRIVATE = YES EXTRACT_STATIC = YES EXTRACT_LOCAL_CLASSES = YES +EXTRACT_LOCAL_METHODS = NO HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO HIDE_FRIEND_COMPOUNDS = NO HIDE_IN_BODY_DOCS = NO -BRIEF_MEMBER_DESC = YES -REPEAT_BRIEF = NO -ALWAYS_DETAILED_SEC = YES -INLINE_INHERITED_MEMB = YES -FULL_PATH_NAMES = NO -STRIP_FROM_PATH = INTERNAL_DOCS = YES CASE_SENSE_NAMES = YES -SHORT_NAMES = NO HIDE_SCOPE_NAMES = NO -VERBATIM_HEADERS = YES SHOW_INCLUDE_FILES = YES -JAVADOC_AUTOBRIEF = YES -MULTILINE_CPP_IS_BRIEF = NO -DETAILS_AT_TOP = NO -INHERIT_DOCS = YES INLINE_INFO = YES SORT_MEMBER_DOCS = NO -DISTRIBUTE_GROUP_DOC = NO -TAB_SIZE = 5 +SORT_BRIEF_DOCS = NO +SORT_BY_SCOPE_NAME = NO GENERATE_TODOLIST = YES GENERATE_TESTLIST = YES GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES -ALIASES = ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 25 -OPTIMIZE_OUTPUT_FOR_C = YES -OPTIMIZE_OUTPUT_JAVA = YES SHOW_USED_FILES = NO +SHOW_DIRECTORIES = NO +FILE_VERSION_FILTER = + #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- QUIET = NO WARNINGS = YES WARN_IF_UNDOCUMENTED = YES +WARN_IF_DOC_ERROR = YES +WARN_NO_PARAMDOC = NO WARN_FORMAT = "$file:$line: $text" WARN_LOGFILE = log.txt + #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- -INPUT = ../../../share/salome/idl/GEOM_Gen.idl \ +INPUT = ../../../share/salome/src \ + ../../../share/salome/idl \ ../../../build/salome/bin -FILE_PATTERNS = *.idl python_extension_must_be_here +FILE_PATTERNS = *.hxx *.cxx *.h *.c *.hh *.cc *.idl python_extension_must_be_here RECURSIVE = YES EXCLUDE = EXCLUDE_SYMLINKS = NO @@ -68,7 +89,9 @@ EXAMPLE_PATTERNS = EXAMPLE_RECURSIVE = NO IMAGE_PATH = sources/ INPUT_FILTER = +FILTER_PATTERNS = FILTER_SOURCE_FILES = YES + #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- @@ -77,12 +100,16 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES REFERENCED_BY_RELATION = NO REFERENCES_RELATION = YES +USE_HTAGS = NO +VERBATIM_HEADERS = YES + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- -ALPHABETICAL_INDEX = NO -COLS_IN_ALPHA_INDEX = 5 +ALPHABETICAL_INDEX = YES +COLS_IN_ALPHA_INDEX = 3 IGNORE_PREFIX = + #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- @@ -90,8 +117,8 @@ GENERATE_HTML = YES HTML_OUTPUT = GEOM HTML_FILE_EXTENSION = .html HTML_HEADER = sources/myheader.html -HTML_FOOTER = -HTML_STYLESHEET = +HTML_FOOTER = sources/footer.html +HTML_STYLESHEET = sources/static/doxygen.css HTML_ALIGN_MEMBERS = YES GENERATE_HTMLHELP = NO CHM_FILE = @@ -99,10 +126,11 @@ HHC_LOCATION = GENERATE_CHI = NO BINARY_TOC = YES TOC_EXPAND = YES -DISABLE_INDEX = YES +DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 4 -GENERATE_TREEVIEW = YES +GENERATE_TREEVIEW = NO TREEVIEW_WIDTH = 250 + #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- @@ -117,6 +145,8 @@ LATEX_HEADER = PDF_HYPERLINKS = NO USE_PDFLATEX = NO LATEX_BATCHMODE = NO +LATEX_HIDE_INDICES = NO + #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -126,6 +156,7 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = + #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- @@ -133,16 +164,21 @@ GENERATE_MAN = NO MAN_OUTPUT = man MAN_EXTENSION = .3 MAN_LINKS = NO + #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- GENERATE_XML = NO +XML_OUTPUT = xml XML_SCHEMA = XML_DTD = +XML_PROGRAMLISTING = YES + #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- GENERATE_AUTOGEN_DEF = NO + #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- @@ -150,11 +186,12 @@ GENERATE_PERLMOD = NO PERLMOD_LATEX = NO PERLMOD_PRETTY = YES PERLMOD_MAKEVAR_PREFIX = + #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- ENABLE_PREPROCESSING = YES -MACRO_EXPANSION = YES +MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO SEARCH_INCLUDES = YES INCLUDE_PATH = @@ -162,14 +199,16 @@ INCLUDE_FILE_PATTERNS = PREDEFINED = EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = NO + #--------------------------------------------------------------------------- -# Configuration::addtions related to external references +# Configuration::additions related to external references #--------------------------------------------------------------------------- TAGFILES = GENERATE_TAGFILE = ALLEXTERNALS = NO EXTERNAL_GROUPS = YES PERL_PATH = /usr/bin/perl + #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -178,24 +217,26 @@ HIDE_UNDOC_RELATIONS = NO HAVE_DOT = YES CLASS_GRAPH = YES COLLABORATION_GRAPH = NO +GROUP_GRAPHS = NO +UML_LOOK = NO TEMPLATE_RELATIONS = YES INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = NO +CALL_GRAPH = NO GRAPHICAL_HIERARCHY = YES +DIRECTORY_GRAPH = YES DOT_IMAGE_FORMAT = jpg DOT_PATH = DOTFILE_DIRS = MAX_DOT_GRAPH_WIDTH = 1024 MAX_DOT_GRAPH_HEIGHT = 1200 +MAX_DOT_GRAPH_DEPTH = 0 +DOT_TRANSPARENT = NO +DOT_MULTI_TARGETS = NO GENERATE_LEGEND = NO DOT_CLEANUP = YES + #--------------------------------------------------------------------------- -# Configuration::addtions related to the search engine +# Configuration::additions related to the search engine #--------------------------------------------------------------------------- SEARCHENGINE = NO -CGI_NAME = search.cgi -CGI_URL = -DOC_URL = -DOC_ABSPATH = -BIN_ABSPATH = /usr/local/bin/ -EXT_DOC_PATHS = diff --git a/doc/salome/tui/GEOM/doxyfile_py b/doc/salome/tui/GEOM/doxyfile_py index cbe58a446..fbab9009d 100755 --- a/doc/salome/tui/GEOM/doxyfile_py +++ b/doc/salome/tui/GEOM/doxyfile_py @@ -1,73 +1,97 @@ -# Doxyfile 1.3-rc1 +# Doxyfile 1.4.6 #--------------------------------------------------------------------------- -# General configuration options +# Project related configuration options #--------------------------------------------------------------------------- -PROJECT_NAME = "SALOME - GEOM - v.3.2.0b1" -PROJECT_NUMBER = id#1.1 +PROJECT_NAME = "SALOME - GEOM - v.version" +PROJECT_NUMBER = OUTPUT_DIRECTORY = ../ +CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English +USE_WINDOWS_ENCODING = NO +BRIEF_MEMBER_DESC = YES +REPEAT_BRIEF = NO +ABBREVIATE_BRIEF = +ALWAYS_DETAILED_SEC = YES +INLINE_INHERITED_MEMB = YES +FULL_PATH_NAMES = YES +STRIP_FROM_PATH = ../../../share/salome \ + ../../../build/salome +STRIP_FROM_INC_PATH = +SHORT_NAMES = NO +JAVADOC_AUTOBRIEF = YES +MULTILINE_CPP_IS_BRIEF = NO +DETAILS_AT_TOP = NO +INHERIT_DOCS = YES +SEPARATE_MEMBER_PAGES = NO +TAB_SIZE = 5 +ALIASES = +OPTIMIZE_OUTPUT_FOR_C = YES +OPTIMIZE_OUTPUT_JAVA = YES +BUILTIN_STL_SUPPORT = NO +DISTRIBUTE_GROUP_DOC = NO +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- EXTRACT_ALL = YES EXTRACT_PRIVATE = YES EXTRACT_STATIC = YES EXTRACT_LOCAL_CLASSES = YES +EXTRACT_LOCAL_METHODS = NO HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO HIDE_FRIEND_COMPOUNDS = NO HIDE_IN_BODY_DOCS = NO -BRIEF_MEMBER_DESC = YES -REPEAT_BRIEF = NO -ALWAYS_DETAILED_SEC = YES -INLINE_INHERITED_MEMB = YES -FULL_PATH_NAMES = NO -STRIP_FROM_PATH = INTERNAL_DOCS = YES CASE_SENSE_NAMES = YES -SHORT_NAMES = NO HIDE_SCOPE_NAMES = NO -VERBATIM_HEADERS = YES SHOW_INCLUDE_FILES = YES -JAVADOC_AUTOBRIEF = YES -MULTILINE_CPP_IS_BRIEF = NO -DETAILS_AT_TOP = NO -INHERIT_DOCS = YES INLINE_INFO = YES SORT_MEMBER_DOCS = NO -DISTRIBUTE_GROUP_DOC = NO -TAB_SIZE = 5 +SORT_BRIEF_DOCS = NO +SORT_BY_SCOPE_NAME = NO GENERATE_TODOLIST = YES GENERATE_TESTLIST = YES GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES -ALIASES = ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 25 -OPTIMIZE_OUTPUT_FOR_C = YES -OPTIMIZE_OUTPUT_JAVA = YES SHOW_USED_FILES = NO +SHOW_DIRECTORIES = NO +FILE_VERSION_FILTER = + #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- QUIET = NO WARNINGS = YES WARN_IF_UNDOCUMENTED = YES +WARN_IF_DOC_ERROR = YES +WARN_NO_PARAMDOC = NO WARN_FORMAT = "$file:$line: $text" WARN_LOGFILE = log.txt + #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- -INPUT = list_py_files_to_process -FILE_PATTERNS = -RECURSIVE = NO +INPUT = ../../../share/salome/src \ + ../../../share/salome/idl \ + ../../../build/salome/bin +FILE_PATTERNS = *.hxx *.cxx *.h *.c *.hh *.cc *.idl python_extension_must_be_here +RECURSIVE = YES EXCLUDE = EXCLUDE_SYMLINKS = NO EXCLUDE_PATTERNS = EXAMPLE_PATH = EXAMPLE_PATTERNS = EXAMPLE_RECURSIVE = NO -IMAGE_PATH = ../sources/ +IMAGE_PATH = sources/ INPUT_FILTER = +FILTER_PATTERNS = FILTER_SOURCE_FILES = YES + #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- @@ -76,21 +100,25 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES REFERENCED_BY_RELATION = NO REFERENCES_RELATION = YES +USE_HTAGS = NO +VERBATIM_HEADERS = YES + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- -ALPHABETICAL_INDEX = NO -COLS_IN_ALPHA_INDEX = 5 +ALPHABETICAL_INDEX = YES +COLS_IN_ALPHA_INDEX = 3 IGNORE_PREFIX = + #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- GENERATE_HTML = YES -HTML_OUTPUT = ../GEOM/geompy_doc +HTML_OUTPUT = GEOM HTML_FILE_EXTENSION = .html -HTML_HEADER = ../sources/myheader_py2.html -HTML_FOOTER = -HTML_STYLESHEET = +HTML_HEADER = sources/myheader.html +HTML_FOOTER = sources/footer.html +HTML_STYLESHEET = sources/static/doxygen.css HTML_ALIGN_MEMBERS = YES GENERATE_HTMLHELP = NO CHM_FILE = @@ -98,10 +126,11 @@ HHC_LOCATION = GENERATE_CHI = NO BINARY_TOC = YES TOC_EXPAND = YES -DISABLE_INDEX = YES +DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 4 -GENERATE_TREEVIEW = YES +GENERATE_TREEVIEW = NO TREEVIEW_WIDTH = 250 + #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- @@ -116,6 +145,8 @@ LATEX_HEADER = PDF_HYPERLINKS = NO USE_PDFLATEX = NO LATEX_BATCHMODE = NO +LATEX_HIDE_INDICES = NO + #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -125,6 +156,7 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = + #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- @@ -132,16 +164,21 @@ GENERATE_MAN = NO MAN_OUTPUT = man MAN_EXTENSION = .3 MAN_LINKS = NO + #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- GENERATE_XML = NO +XML_OUTPUT = xml XML_SCHEMA = XML_DTD = +XML_PROGRAMLISTING = YES + #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- GENERATE_AUTOGEN_DEF = NO + #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- @@ -149,11 +186,12 @@ GENERATE_PERLMOD = NO PERLMOD_LATEX = NO PERLMOD_PRETTY = YES PERLMOD_MAKEVAR_PREFIX = + #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- ENABLE_PREPROCESSING = YES -MACRO_EXPANSION = YES +MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO SEARCH_INCLUDES = YES INCLUDE_PATH = @@ -161,14 +199,16 @@ INCLUDE_FILE_PATTERNS = PREDEFINED = EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = NO + #--------------------------------------------------------------------------- -# Configuration::addtions related to external references +# Configuration::additions related to external references #--------------------------------------------------------------------------- TAGFILES = GENERATE_TAGFILE = ALLEXTERNALS = NO EXTERNAL_GROUPS = YES PERL_PATH = /usr/bin/perl + #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -177,24 +217,26 @@ HIDE_UNDOC_RELATIONS = NO HAVE_DOT = YES CLASS_GRAPH = YES COLLABORATION_GRAPH = NO +GROUP_GRAPHS = NO +UML_LOOK = NO TEMPLATE_RELATIONS = YES INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = NO +CALL_GRAPH = NO GRAPHICAL_HIERARCHY = YES +DIRECTORY_GRAPH = YES DOT_IMAGE_FORMAT = jpg DOT_PATH = DOTFILE_DIRS = MAX_DOT_GRAPH_WIDTH = 1024 MAX_DOT_GRAPH_HEIGHT = 1200 +MAX_DOT_GRAPH_DEPTH = 0 +DOT_TRANSPARENT = NO +DOT_MULTI_TARGETS = NO GENERATE_LEGEND = NO DOT_CLEANUP = YES + #--------------------------------------------------------------------------- -# Configuration::addtions related to the search engine +# Configuration::additions related to the search engine #--------------------------------------------------------------------------- SEARCHENGINE = NO -CGI_NAME = search.cgi -CGI_URL = -DOC_URL = -DOC_ABSPATH = -BIN_ABSPATH = /usr/local/bin/ -EXT_DOC_PATHS = diff --git a/doc/salome/tui/GEOM/sources/myheader.html b/doc/salome/tui/GEOM/sources/myheader.html index 83ca543cd..1dc1ce7a4 100755 --- a/doc/salome/tui/GEOM/sources/myheader.html +++ b/doc/salome/tui/GEOM/sources/myheader.html @@ -8,17 +8,5 @@   -
- - - - - - -
-
-
- - diff --git a/doc/salome/tui/GEOM/sources/static/doxygen.css b/doc/salome/tui/GEOM/sources/static/doxygen.css index 0a8e93d50..88e613d23 100755 --- a/doc/salome/tui/GEOM/sources/static/doxygen.css +++ b/doc/salome/tui/GEOM/sources/static/doxygen.css @@ -1,21 +1,139 @@ -H1 { text-align: center; } -CAPTION { font-weight: bold } +H1 { + text-align: center; +} + +CAPTION { + font-weight: bold +} + +/* Link in the top navbar */ A.qindex {} + A.qindexRef {} -A.el { text-decoration: none; font-weight: bold } -A.elRef { font-weight: bold } -A.code { text-decoration: none; font-weight: normal; color: #4444ee } -A.codeRef { font-weight: normal; color: #4444ee } -A:hover { text-decoration: none; background-color: lightblue } -DL.el { margin-left: -1cm } -DIV.fragment { width: 100%; border: none; background-color: #CCCCCC } -DIV.ah { background-color: #CCCCCC; font-weight: bold; color: #ffffff; margin-bottom: 3px; margin-top: 3px } -TD.md { background-color: lightblue; font-weight: bold; } -TD.mdname1 { background-color: lightblue; font-weight: bold; color: #602020; } -TD.mdname { background-color: lightblue; font-weight: bold; color: #602020; width: 600px; } -DIV.groupHeader { margin-left: 16px; margin-top: 12px; margin-bottom: 6px; font-weight: bold } -DIV.groupText { margin-left: 16px; font-style: italic; font-size: smaller } -BODY { background: url(sources/bg_salome.gif) } + +/* Link to any cross-referenced Doxygen element */ +A.el { + text-decoration: none; + font-weight: bold +} + +A.elRef { + font-weight: bold +} + +/* Link to any cross-referenced Doxygen element inside a code section + (ex: header) +*/ +A.code { + text-decoration: none; + font-weight: normal; + color: #4444ee +} + +A.codeRef { + font-weight: normal; + color: #4444ee +} + +A:hover { + text-decoration: none; + background-color: lightblue +} + +DL.el { + margin-left: -1cm +} + +/* A code fragment (ex: header) */ +DIV.fragment { + width: 100%; + border: none; + background-color: #CCCCCC +} + +/* In the alpha list (coumpound index), style of an alphabetical index letter */ +DIV.ah { + background-color: #CCCCCC; + font-weight: bold; + color: #ffffff; + margin-bottom: 3px; + margin-top: 3px +} + +/* Method name (+ type) */ +TD.md { + background-color: lightblue; + font-weight: bold; +} + +/* Method parameter (some of them) */ +TD.mdname1 { + background-color: lightblue; + font-weight: bold; color: #602020; +} + +/* Method parameter (some of them) */ +TD.mdname { + background-color: lightblue; + font-weight: bold; + color: #602020; + width: 600px; +} + +/* Separator between methods group (usually empty, seems not supported by IE) */ +DIV.groupHeader { + margin-left: 16px; + margin-top: 12px; + margin-bottom: 6px; + font-weight: bold +} + +DIV.groupText { + margin-left: 16px; + font-style: italic; + font-size: smaller +} + +BODY { + background: #FFFFFF; +} + +/*div.div-page { + background-color: #FFFFFF; + margin-left: 1em; + margin-right: 1em; + margin-top: 1em; + margin-bottom: 0.1em; + + padding-left: 1em; + padding-right: 1em; + padding-top: 0.5em; + padding-bottom: 0.5em; + + border: 2px solid #0D299A; + border-width: 2px; + border-color: #0D299A; +}*/ + +div.tabs { + text-align: justify; + margin-left : 2px; + margin-right : 2px; + margin-top : 2px; + margin-bottom : 2px + font-weight: bold; + color: #FFFFFF; +} + +DIV.div-footer { + margin-left: 1em; + margin-right: 1em; + margin-bottom: 0.2em; + text-align: right; + font-size: 9pt; +} + +/* In File List, Coumpound List, etc, 1st column of the index */ TD.indexkey { background-color: #CCCCCC; font-weight: bold; @@ -28,6 +146,8 @@ TD.indexkey { margin-top : 2px; margin-bottom : 2px } + +/* In File List, Coumpound List, etc, 2nd column of the index */ TD.indexvalue { background-color: #CCCCCC; font-style: italic; @@ -40,6 +160,7 @@ TD.indexvalue { margin-top : 2px; margin-bottom : 2px } + span.keyword { color: #008000 } span.keywordtype { color: #604020 } span.keywordflow { color: #e08000 } diff --git a/doc/salome/tui/Makefile.in b/doc/salome/tui/Makefile.in index 7f5979e97..358504a5e 100644 --- a/doc/salome/tui/Makefile.in +++ b/doc/salome/tui/Makefile.in @@ -27,7 +27,8 @@ docs: cd INPUT; \ sed 's|../../../share/salome|$(root_srcdir)|' ./doxyfile > ./doxyfile1; \ sed 's|../../build/salome|$(top_builddir)|' ./doxyfile1 > ./doxyfile2; \ - mv -f doxyfile2 doxyfile1; \ + sed "s|version|`cut -d: -f2 $(root_srcdir)/bin/VERSION`|" ./doxyfile2 > ./doxyfile3; \ + mv -f doxyfile3 doxyfile1; \ if (test "x@DOXYGEN_WITH_PYTHON@" = "xyes"); then \ echo "DOXYGEN SUPPORT PYTHON - @DOXYGEN_WITH_PYTHON@"; \ sed 's|python_extension_must_be_here|*.py|' ./doxyfile1 > ./doxyfile2; \ diff --git a/idl/Makefile.in b/idl/Makefile.in index 72f11d7c6..4fe38075e 100644 --- a/idl/Makefile.in +++ b/idl/Makefile.in @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # # generate dependencies for idl file : # diff --git a/src/EntityGUI/EntityGUI.cxx b/src/EntityGUI/EntityGUI.cxx index f3e695e6d..12ae4e2ef 100644 --- a/src/EntityGUI/EntityGUI.cxx +++ b/src/EntityGUI/EntityGUI.cxx @@ -50,19 +50,13 @@ using namespace boost; using namespace std; -EntityGUI* EntityGUI::myGUIObject = 0; - //======================================================================= // function : GetEntityGUI() // purpose : Get the only EntityGUI object [ static ] //======================================================================= EntityGUI* EntityGUI::GetEntityGUI( GeometryGUI* parent ) { - if ( myGUIObject == 0 ) { - // init EntityGUI only once - myGUIObject = new EntityGUI( parent ); - } - return myGUIObject; + return new EntityGUI( parent ); } //======================================================================= diff --git a/src/EntityGUI/EntityGUI.h b/src/EntityGUI/EntityGUI.h index be82e32fc..7441021ab 100644 --- a/src/EntityGUI/EntityGUI.h +++ b/src/EntityGUI/EntityGUI.h @@ -61,9 +61,6 @@ public : // AIS shape used only during topo/geom simulations Handle(AIS_Shape) mySimulationShape1; Handle(AIS_Shape) mySimulationShape2; - -private: - static EntityGUI* myGUIObject; //!< the only EntityGUI object }; #endif diff --git a/src/EntityGUI/EntityGUI_Skeleton_QTD.cxx b/src/EntityGUI/EntityGUI_Skeleton_QTD.cxx index fbcfd5e1a..55c60b867 100644 --- a/src/EntityGUI/EntityGUI_Skeleton_QTD.cxx +++ b/src/EntityGUI/EntityGUI_Skeleton_QTD.cxx @@ -1,3 +1,22 @@ +// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. +// +// This library is distributed in the hope that it will be useful +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. +// +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// See http://www.salome-platform.org/ +// /**************************************************************************** ** Form implementation generated from reading ui file 'EntityGUI_Skeleton_QTD.ui' ** diff --git a/src/EntityGUI/EntityGUI_Skeleton_QTD.h b/src/EntityGUI/EntityGUI_Skeleton_QTD.h index 149f7b32f..735a3cf10 100644 --- a/src/EntityGUI/EntityGUI_Skeleton_QTD.h +++ b/src/EntityGUI/EntityGUI_Skeleton_QTD.h @@ -1,3 +1,22 @@ +// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. +// +// This library is distributed in the hope that it will be useful +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. +// +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// See http://www.salome-platform.org/ +// /**************************************************************************** ** Form interface generated from reading ui file 'EntityGUI_Skeleton_QTD.ui' ** diff --git a/src/GEOM/Makefile.in b/src/GEOM/Makefile.in index ca263cd97..43ac25d5f 100644 --- a/src/GEOM/Makefile.in +++ b/src/GEOM/Makefile.in @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# top_srcdir=@top_srcdir@ top_builddir=../.. diff --git a/src/GEOMBase/GEOMBase_Helper.cxx b/src/GEOMBase/GEOMBase_Helper.cxx index c8201fc5f..9d65029f8 100755 --- a/src/GEOMBase/GEOMBase_Helper.cxx +++ b/src/GEOMBase/GEOMBase_Helper.cxx @@ -759,13 +759,21 @@ bool GEOMBase_Helper::onAccept( const bool publish, const bool useTransaction ) else { const int nbObjs = objects.size(); bool withChildren = false; + int aNumber = 1; for ( ObjectList::iterator it = objects.begin(); it != objects.end(); ++it ) { if ( publish ) { - QString aName(""); - if ( nbObjs > 1 ) - aName = strlen( getNewObjectName() ) ? GEOMBase::GetDefaultName( getNewObjectName() ) : GEOMBase::GetDefaultName( getPrefix( *it ) ); - else { - aName = getNewObjectName(); + QString aName = getNewObjectName(); + if ( nbObjs > 1 ) { + if (aName.isEmpty()) + aName = getPrefix(*it); + if (nbObjs <= 30) { + // Try to find a unique name + aName = GEOMBase::GetDefaultName(aName); + } else { + // Don't check name uniqueness in case of numerous objects + aName = aName + "_" + QString::number(aNumber++); + } + } else { // PAL6521: use a prefix, if some dialog box doesn't reimplement getNewObjectName() if ( aName.isEmpty() ) aName = GEOMBase::GetDefaultName( getPrefix( *it ) ); diff --git a/src/GEOMContext/GEOM_icons.po b/src/GEOMContext/GEOM_icons.po index ed64a379c..7d3852d9c 100644 --- a/src/GEOMContext/GEOM_icons.po +++ b/src/GEOMContext/GEOM_icons.po @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # This is a Qt message file in .po format. Each msgid starts with # a scope. This scope should *NOT* be translated - eg. translating # from French to English, "Foo::Bar" would be translated to "Pub", diff --git a/src/GEOMContext/GEOM_msg_en.po b/src/GEOMContext/GEOM_msg_en.po index 5d07378e1..213da1118 100644 --- a/src/GEOMContext/GEOM_msg_en.po +++ b/src/GEOMContext/GEOM_msg_en.po @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # This is a Qt message file in .po format. Each msgid starts with # a scope. This scope should *NOT* be translated - eg. translating # from French to English, "Foo::Bar" would be translated to "Pub", diff --git a/src/GEOMContext/GEOM_msg_fr.po b/src/GEOMContext/GEOM_msg_fr.po index f0ba8041c..baa7fad40 100644 --- a/src/GEOMContext/GEOM_msg_fr.po +++ b/src/GEOMContext/GEOM_msg_fr.po @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # This is a Qt message file in .po format. Each msgid starts with # a scope. This scope should *NOT* be translated - eg. translating # from French to English, "Foo::Bar" would be translated to "Pub", diff --git a/src/GEOMGUI/GEOM_images.po b/src/GEOMGUI/GEOM_images.po index 82790154e..5e89ab3f4 100644 --- a/src/GEOMGUI/GEOM_images.po +++ b/src/GEOMGUI/GEOM_images.po @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # This is a Qt message file in .po format. Each msgid starts with # a scope. This scope should *NOT* be translated - eg. translating # from French to English, "Foo::Bar" would be translated to "Pub", diff --git a/src/GEOMGUI/GEOM_msg_en.po b/src/GEOMGUI/GEOM_msg_en.po index 0714da291..018d08521 100644 --- a/src/GEOMGUI/GEOM_msg_en.po +++ b/src/GEOMGUI/GEOM_msg_en.po @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # This is a Qt message file in .po format. Each msgid starts with # a scope. This scope should *NOT* be translated - eg. translating # from French to English, "Foo::Bar" would be translated to "Pub", diff --git a/src/GEOMGUI/GEOM_msg_fr.po b/src/GEOMGUI/GEOM_msg_fr.po index 3a3e3c481..7bfba8931 100644 --- a/src/GEOMGUI/GEOM_msg_fr.po +++ b/src/GEOMGUI/GEOM_msg_fr.po @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# # This is a Qt message file in .po format. Each msgid starts with # a scope. This scope should *NOT* be translated - eg. translating # from French to English, "Foo::Bar" would be translated to "Pub", diff --git a/src/GEOMGUI/GeometryGUI.cxx b/src/GEOMGUI/GeometryGUI.cxx index f113bc8f0..e81e7099f 100644 --- a/src/GEOMGUI/GeometryGUI.cxx +++ b/src/GEOMGUI/GeometryGUI.cxx @@ -77,16 +77,22 @@ extern "C" { -GEOM::GEOM_Gen_var GeometryGUI::myComponentGeom = GEOM::GEOM_Gen::_nil(); +GEOM::GEOM_Gen_var GeometryGUI::myComponentGeom = GEOM::GEOM_Gen::_nil(); -GEOM::GEOM_Gen_var GeometryGUI::GetGeomGen() { return GeometryGUI::myComponentGeom; } +GEOM::GEOM_Gen_var GeometryGUI::GetGeomGen() +{ + // Bug 12290: exception in Mesh GUI on GEOMBase::GetShape() if Geometry GUI hasn't been loaded + if (CORBA::is_nil(myComponentGeom)) + InitGeomGen(); + return GeometryGUI::myComponentGeom; +} -bool GeometryGUI::InitGeomGen() +bool GeometryGUI::InitGeomGen() { GeometryGUI aGG; - if( CORBA::is_nil( myComponentGeom ) ) return false; - return true; -} + if( CORBA::is_nil( myComponentGeom ) ) return false; + return true; +} //======================================================================= // function : ClientSObjectToObject @@ -726,8 +732,8 @@ void GeometryGUI::createGeomAction( const int id, const QString& po_id, const QS //======================================================================= -// function : GeometryGUI::Deactivate() -// purpose : Called when GEOM module is deactivated [ static ] +// function : GeometryGUI::initialize() +// purpose : Called when GEOM module is created //======================================================================= void GeometryGUI::initialize( CAM_Application* app ) { @@ -1099,8 +1105,8 @@ void GeometryGUI::initialize( CAM_Application* app ) } //======================================================================= -// function : GeometryGUI::Deactivate() -// purpose : Called when GEOM module is deactivated [ static ] +// function : GeometryGUI::activateModule() +// purpose : Called when GEOM module is activated //======================================================================= bool GeometryGUI::activateModule( SUIT_Study* study ) { @@ -1115,9 +1121,15 @@ bool GeometryGUI::activateModule( SUIT_Study* study ) setMenuShown( true ); setToolShown( true ); - connect( application()->desktop(), SIGNAL( windowActivated( SUIT_ViewWindow* ) ), + connect( application()->desktop(), SIGNAL( windowActivated( SUIT_ViewWindow* ) ), this, SLOT( onWindowActivated( SUIT_ViewWindow* ) ) ); + // Reset actions accelerator keys + //action(111)->setAccel(QKeySequence(CTRL + Key_I)); // Import + //action(121)->setAccel(QKeySequence(CTRL + Key_E)); // Export + action(111)->setEnabled(true); // Import + action(121)->setEnabled(true); // Export + GUIMap::Iterator it; for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) it.data()->activate( application()->desktop() ); @@ -1136,19 +1148,19 @@ bool GeometryGUI::activateModule( SUIT_Study* study ) getApp()->selectionMgr()->setEnabled( false, OCCViewer_Viewer::Type() ); for ( GEOMGUI_OCCSelector* sr = myOCCSelectors.first(); sr; sr = myOCCSelectors.next() ) sr->setEnabled(true); - + // disable VTK selectors getApp()->selectionMgr()->setEnabled( false, SVTK_Viewer::Type() ); for ( LightApp_VTKSelector* sr = myVTKSelectors.first(); sr; sr = myVTKSelectors.next() ) sr->setEnabled(true); - + return true; } //======================================================================= -// function : GeometryGUI::Deactivate() -// purpose : Called when GEOM module is deactivated [ static ] +// function : GeometryGUI::deactivateModule() +// purpose : Called when GEOM module is deactivated //======================================================================= bool GeometryGUI::deactivateModule( SUIT_Study* study ) { @@ -1164,6 +1176,12 @@ bool GeometryGUI::deactivateModule( SUIT_Study* study ) for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) it.data()->deactivate(); + // Unset actions accelerator keys + //action(111)->setAccel(QKeySequence()); // Import + //action(121)->setAccel(QKeySequence()); // Export + action(111)->setEnabled(false); // Import + action(121)->setEnabled(false); // Export + myOCCSelectors.clear(); getApp()->selectionMgr()->setEnabled( true, OCCViewer_Viewer::Type() ); @@ -1485,7 +1503,7 @@ void GeometryGUI::BuildPresentation( const Handle(SALOME_InteractiveObject)& io, } //======================================================================= -// function : setCommandsEnabled() +// function : onWindowActivated() // purpose : update menu items' status - disable non-OCC-viewer-compatible actions //======================================================================= void GeometryGUI::onWindowActivated( SUIT_ViewWindow* win ) diff --git a/src/GEOMGUI/GeometryGUI_Swig.cxx b/src/GEOMGUI/GeometryGUI_Swig.cxx index 5c05f3f5f..b408510be 100644 --- a/src/GEOMGUI/GeometryGUI_Swig.cxx +++ b/src/GEOMGUI/GeometryGUI_Swig.cxx @@ -69,6 +69,7 @@ #include #include CORBA_SERVER_HEADER(GEOM_Gen) +#include #include using namespace std; @@ -233,67 +234,34 @@ void GEOM_Swig::createAndDisplayGO (const char* Entry) ProcessVoidEvent(new TEventUpdateBrowser ()); } - -void GEOM_Swig::eraseGO (const char* Entry, bool allWindows) +void GEOM_Swig::createAndDisplayFitAllGO (const char* Entry) { - class TEvent: public SALOME_Event + class TEventFitAll: public SALOME_Event { - std::string myEntry; - bool myFromAllWindows; - public: - TEvent(const char* theEntry, bool fromAllWindows): - myEntry(theEntry), myFromAllWindows(fromAllWindows) - {} - virtual void Execute() - { - SUIT_Application* app = SUIT_Session::session()->activeApplication(); - if (!app) return; - Handle (SALOME_InteractiveObject) aIO = new SALOME_InteractiveObject(myEntry.c_str(), "GEOM", ""); - - if (myFromAllWindows) { - QPtrList aWindows = app->desktop()->windows(); - SUIT_ViewWindow* aWin = 0; - for (aWin = aWindows.first(); aWin; aWin = aWindows.next()) { - EraseObject(aWin, aIO); - } - } else { - SUIT_ViewWindow* aWin = app->desktop()->activeWindow(); - if (aWin) - EraseObject(aWin, aIO); - } - } - - private: - void EraseObject(SUIT_ViewWindow* theWin, Handle (SALOME_InteractiveObject) theIO) - { - if (theWin->getViewManager()->getType() == OCCViewer_Viewer::Type()){ - OCCViewer_ViewWindow* vw = dynamic_cast( theWin ); - if ( vw ) { - OCCViewer_ViewManager* vm = dynamic_cast( vw->getViewManager() ); - if ( vm ) { - SOCC_Viewer* aViewer = dynamic_cast(vm->getOCCViewer()); - if (aViewer) { - SALOME_Prs* aPrs = aViewer->CreatePrs(myEntry.c_str()); - if (aPrs) { - SALOME_OCCPrs* aOccPrs = dynamic_cast(aPrs); - if (aOccPrs) { - aViewer->Erase(aOccPrs); - aViewer->Repaint(); - } - } - } + public: + TEventFitAll() {} + virtual void Execute() { + SUIT_Application* app = SUIT_Session::session()->activeApplication(); + if (!app) return; + + if (SVTK_ViewWindow* aViewWindow = GetSVTKViewWindow(app)) + { + SVTK_View* aView = aViewWindow->getView(); + aView->GetRenderer()->OnFitAll(); + } + else if (OCCViewer_Viewer* occViewer = GetOCCViewer(app)) + { + Handle(V3d_Viewer) aViewer3d = occViewer->getViewer3d(); + aViewer3d->InitActiveViews(); + + if (aViewer3d->MoreActiveViews()) + aViewer3d->ActiveView()->FitAll(); } - } - } else if (theWin->getViewManager()->getType() == SVTK_Viewer::Type()){ - SVTK_ViewWindow* aViewWindow = dynamic_cast( theWin ); - if (aViewWindow) { - aViewWindow->Erase(theIO); - } } - } - }; - ProcessVoidEvent(new TEvent(Entry, allWindows)); + + createAndDisplayGO(Entry); + ProcessVoidEvent(new TEventFitAll()); } int GEOM_Swig::getIndexTopology(const char* SubIOR, const char* IOR) @@ -486,6 +454,86 @@ void GEOM_Swig::setTransparency(const char* theEntry, float transp) } +class TInitGeomGenEvent: public SALOME_Event { +public: + typedef bool TResult; + TResult myResult; + TInitGeomGenEvent() : myResult(false) {} + virtual void Execute() { + myResult = GeometryGUI::InitGeomGen(); + } +}; +bool GEOM_Swig::initGeomGen() +{ + return ProcessEvent(new TInitGeomGenEvent()); +} + + + +void GEOM_Swig::eraseGO (const char* Entry, bool allWindows) +{ + class TEvent: public SALOME_Event + { + std::string myEntry; + bool myFromAllWindows; + public: + TEvent(const char* theEntry, bool fromAllWindows): + myEntry(theEntry), myFromAllWindows(fromAllWindows) + {} + virtual void Execute() + { + SUIT_Application* app = SUIT_Session::session()->activeApplication(); + if (!app) return; + Handle (SALOME_InteractiveObject) aIO = new SALOME_InteractiveObject(myEntry.c_str(), "GEOM", ""); + + if (myFromAllWindows) { + QPtrList aWindows = app->desktop()->windows(); + SUIT_ViewWindow* aWin = 0; + for (aWin = aWindows.first(); aWin; aWin = aWindows.next()) { + EraseObject(aWin, aIO); + } + } else { + SUIT_ViewWindow* aWin = app->desktop()->activeWindow(); + if (aWin) + EraseObject(aWin, aIO); + } + } + + private: + void EraseObject(SUIT_ViewWindow* theWin, Handle (SALOME_InteractiveObject) theIO) + { + if (theWin->getViewManager()->getType() == OCCViewer_Viewer::Type()){ + OCCViewer_ViewWindow* vw = dynamic_cast( theWin ); + if ( vw ) { + OCCViewer_ViewManager* vm = dynamic_cast( vw->getViewManager() ); + if ( vm ) { + SOCC_Viewer* aViewer = dynamic_cast(vm->getOCCViewer()); + if (aViewer) { + SALOME_Prs* aPrs = aViewer->CreatePrs(myEntry.c_str()); + if (aPrs) { + SALOME_OCCPrs* aOccPrs = dynamic_cast(aPrs); + if (aOccPrs) { + aViewer->Erase(aOccPrs); + aViewer->Repaint(); + } + } + } + } + } + } else if (theWin->getViewManager()->getType() == SVTK_Viewer::Type()){ + SVTK_ViewWindow* aViewWindow = dynamic_cast( theWin ); + if (aViewWindow) { + aViewWindow->Erase(theIO); + } + } + } + + }; + ProcessVoidEvent(new TEvent(Entry, allWindows)); +} + + + void GEOM_Swig::setDeflection(const char* theEntry, float theDeflect) { class TEvent: public SALOME_Event { @@ -548,17 +596,3 @@ void GEOM_Swig::setDeflection(const char* theEntry, float theDeflect) ProcessVoidEvent(new TEvent (theEntry, theDeflect)); } - -class TInitGeomGenEvent: public SALOME_Event { -public: - typedef bool TResult; - TResult myResult; - TInitGeomGenEvent() : myResult(false) {} - virtual void Execute() { - myResult = GeometryGUI::InitGeomGen(); - } -}; -bool GEOM_Swig::initGeomGen() -{ - return ProcessEvent(new TInitGeomGenEvent()); -} diff --git a/src/GEOMGUI/GeometryGUI_Swig.hxx b/src/GEOMGUI/GeometryGUI_Swig.hxx index 1d96ef78e..fa835c93c 100644 --- a/src/GEOMGUI/GeometryGUI_Swig.hxx +++ b/src/GEOMGUI/GeometryGUI_Swig.hxx @@ -51,6 +51,7 @@ public: void createAndDisplayGO(const char* Entry); void eraseGO(const char* Entry, bool allWindows); + void createAndDisplayFitAllGO(const char* Entry); void setDisplayMode(const char* Entry, int mode); void setColor(const char* Entry, int red, int green, int blue); void setTransparency(const char* Entry, float transp); diff --git a/src/GEOMGUI/GeometryGUI_Swig.i b/src/GEOMGUI/GeometryGUI_Swig.i index b37885b14..69f28e725 100644 --- a/src/GEOMGUI/GeometryGUI_Swig.i +++ b/src/GEOMGUI/GeometryGUI_Swig.i @@ -38,6 +38,7 @@ class GEOM_Swig void createAndDisplayGO(const char* Entry); void eraseGO(const char* Entry, bool allWindows); + void createAndDisplayFitAllGO(const char* Entry); int getIndexTopology(const char *SubEntry, const char *Entry); const char* getShapeTypeString(const char *Entry); diff --git a/src/GEOMImpl/GEOMImpl_MirrorDriver.cxx b/src/GEOMImpl/GEOMImpl_MirrorDriver.cxx index cde05e64e..531aa6594 100644 --- a/src/GEOMImpl/GEOMImpl_MirrorDriver.cxx +++ b/src/GEOMImpl/GEOMImpl_MirrorDriver.cxx @@ -30,12 +30,13 @@ #include #include +#include #include #include #include #include #include -#include +#include #include @@ -86,6 +87,21 @@ Standard_Integer GEOMImpl_MirrorDriver::Execute(TFunction_Logbook& log) const TopoDS_Shape anOriginal = anOriginalFunction->GetValue(); if (anOriginal.IsNull()) return 0; + // Bug 12158: Check for standalone (not included in faces) degenerated edges + TopTools_IndexedDataMapOfShapeListOfShape aEFMap; + TopExp::MapShapesAndAncestors(anOriginal, TopAbs_EDGE, TopAbs_FACE, aEFMap); + Standard_Integer i, nbE = aEFMap.Extent(); + for (i = 1; i <= nbE; i++) { + TopoDS_Shape anEdgeSh = aEFMap.FindKey(i); + if (BRep_Tool::Degenerated(TopoDS::Edge(anEdgeSh))) { + const TopTools_ListOfShape& aFaces = aEFMap.FindFromIndex(i); + if (aFaces.IsEmpty()) + Standard_ConstructionError::Raise + ("Mirror aborted : cannot process standalone degenerated edge"); + } + } + + // Perform Mirror if (aType == MIRROR_PLANE || aType == MIRROR_PLANE_COPY) { Handle(GEOM_Function) aPlane = TI.GetPlane(); if (aPlane.IsNull()) return 0; diff --git a/src/GEOMImpl/Makefile.in b/src/GEOMImpl/Makefile.in index 32a106aff..9209e4e5a 100644 --- a/src/GEOMImpl/Makefile.in +++ b/src/GEOMImpl/Makefile.in @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# top_srcdir=@top_srcdir@ top_builddir=../.. diff --git a/src/GEOM_I/GEOM_DumpPython.cc b/src/GEOM_I/GEOM_DumpPython.cc index 19e6ed621..2d650b884 100644 --- a/src/GEOM_I/GEOM_DumpPython.cc +++ b/src/GEOM_I/GEOM_DumpPython.cc @@ -64,7 +64,7 @@ Engines::TMPFile* GEOM_Gen_i::DumpPython(CORBA::Object_ptr theStudy, } TCollection_AsciiString aScript = - "### This file is generated by SALOME automatically by dump python funcitonality\n" + "### This file is generated by SALOME automatically by dump python functionality\n" "### of GEOM component\n\n"; aScript += _impl->DumpPython(aStudy->StudyId(), aMap, isPublished, isValidScript); diff --git a/src/GEOM_SWIG/GEOM_Nut.py b/src/GEOM_SWIG/GEOM_Nut.py index c3d2db429..2cd2d7e52 100755 --- a/src/GEOM_SWIG/GEOM_Nut.py +++ b/src/GEOM_SWIG/GEOM_Nut.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# ##################################################################### #Created :17/02/2005 #Auhtor :MASLOV Eugeny, KOVALTCHUK Alexey diff --git a/src/GEOM_SWIG/GEOM_TestMeasures.py b/src/GEOM_SWIG/GEOM_TestMeasures.py index 53604ea18..1700ca167 100644 --- a/src/GEOM_SWIG/GEOM_TestMeasures.py +++ b/src/GEOM_SWIG/GEOM_TestMeasures.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# def TestMeasureOperations (geompy, math): p0 = geompy.MakeVertex(0 , 0, 0) diff --git a/src/GEOM_SWIG/GEOM_cyl2complementary.py b/src/GEOM_SWIG/GEOM_cyl2complementary.py index 97efc776e..8dfef59ca 100755 --- a/src/GEOM_SWIG/GEOM_cyl2complementary.py +++ b/src/GEOM_SWIG/GEOM_cyl2complementary.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# #============================================================================== # Info. # Bug (from script, bug) : cyl2complementary_modified.py, PAL6700 @@ -12,11 +31,12 @@ import salome import geompy geomgui = salome.ImportComponentGUI("GEOM") - +import salome_ComponentGUI def addToStudy(shape, name): i = geompy.addToStudy(shape, name) salome.sg.updateObjBrowser(0) - geomgui.createAndDisplayGO(i) + if not isinstance(geomgui, type(salome_ComponentGUI)): + geomgui.createAndDisplayGO(i) return i # Piece diff --git a/src/GEOM_SWIG/GEOM_example3.py b/src/GEOM_SWIG/GEOM_example3.py index 1287f6853..da733d477 100644 --- a/src/GEOM_SWIG/GEOM_example3.py +++ b/src/GEOM_SWIG/GEOM_example3.py @@ -30,7 +30,7 @@ import salome import geompy import math from time import sleep - +import salome_ComponentGUI geom = salome.lcc.FindOrLoadComponent("FactoryServer", "GEOM") myBuilder = salome.myStudy.NewBuilder() @@ -47,14 +47,16 @@ dirz = BasicOp.MakeVectorTwoPnt(point0,pointz1) torus1 = PrimOp.MakeTorusPntVecRR(point0,dirz,150.,25.) id_torus1 = geompy.addToStudy(torus1,"torus1") -gg.createAndDisplayGO(id_torus1) +if not isinstance(gg, type(salome_ComponentGUI)): + gg.createAndDisplayGO(id_torus1) torus2 = InsertOp.MakeCopy(torus1) vec1 = BasicOp.MakeVectorDXDYDZ(0.,0.,100.) torus2 = TrsfOp.TranslateVectorCopy(torus2,vec1) id_torus2 = geompy.addToStudy(torus2,"torus2") -gg.createAndDisplayGO(id_torus2) +if not isinstance(gg, type(salome_ComponentGUI)): + gg.createAndDisplayGO(id_torus2) cylz1 = PrimOp.MakeCylinderPntVecRH(point0,dirz,25.,100.) @@ -70,7 +72,8 @@ while ind < 6: name = "cyl%d"%(ind) acyl = TrsfOp.TranslateVectorCopy(acyl,vec_i) id_acyl = geompy.addToStudy(acyl,name) - gg.createAndDisplayGO(id_acyl) + if not isinstance(gg, type(salome_ComponentGUI)): + gg.createAndDisplayGO(id_acyl) shapeList.append(acyl) idList.append(id_acyl) ind = ind +1 @@ -82,7 +85,8 @@ idList.append(id_torus2) cage = geompy.MakeCompound(shapeList) id_cage = geompy.addToStudy(cage,"cage") -gg.createAndDisplayGO(id_cage) +if not isinstance(gg, type(salome_ComponentGUI)): + gg.createAndDisplayGO(id_cage) from salome import sg sleep(1) @@ -102,15 +106,15 @@ for id in idList: sg.Display(id_torus1) sg.Display(id_torus2) sg.Display(id_acyl) - -gg.setTransparency(id_torus1,0.5) - -gg.setDisplayMode(id_torus1,1) -gg.setDisplayMode(id_torus2,1) -gg.setDisplayMode(id_acyl,1) -#gg.setDisplayMode(id_cage,1) - -gg.setColor(id_torus1,0,0,255) -gg.setColor(id_torus2,255,0,0) -gg.setColor(id_acyl,0,255,0) -#gg.setColor(id_cage,255,255,0) +if not isinstance(gg, type(salome_ComponentGUI)): + gg.setTransparency(id_torus1,0.5) + + gg.setDisplayMode(id_torus1,1) + gg.setDisplayMode(id_torus2,1) + gg.setDisplayMode(id_acyl,1) + #gg.setDisplayMode(id_cage,1) + + gg.setColor(id_torus1,0,0,255) + gg.setColor(id_torus2,255,0,0) + gg.setColor(id_acyl,0,255,0) + #gg.setColor(id_cage,255,255,0) diff --git a/src/GEOM_SWIG/GEOM_example4.py b/src/GEOM_SWIG/GEOM_example4.py index 631ef13ca..cbc0a6f94 100755 --- a/src/GEOM_SWIG/GEOM_example4.py +++ b/src/GEOM_SWIG/GEOM_example4.py @@ -34,7 +34,7 @@ import geompy geom = salome.lcc.FindOrLoadComponent("FactoryServer", "GEOM") myBuilder = salome.myStudy.NewBuilder() -from geompy import gg +#from geompy import gg #smeshgui = salome.ImportComponentGUI("SMESH") #smeshgui.Init(salome.myStudyId); diff --git a/src/GEOM_SWIG/GEOM_shared_modules.py b/src/GEOM_SWIG/GEOM_shared_modules.py index bd994fadc..8ea86f11e 100644 --- a/src/GEOM_SWIG/GEOM_shared_modules.py +++ b/src/GEOM_SWIG/GEOM_shared_modules.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# """ """ diff --git a/src/GEOM_SWIG/GEOM_shellSolid.py b/src/GEOM_SWIG/GEOM_shellSolid.py index 0495979c1..32e599afd 100755 --- a/src/GEOM_SWIG/GEOM_shellSolid.py +++ b/src/GEOM_SWIG/GEOM_shellSolid.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# #============================================================================== # Info. # Bug (from script, bug) : shellSolid_modified.py, PAL6611 diff --git a/src/GEOM_SWIG/GEOM_tube_geom.py b/src/GEOM_SWIG/GEOM_tube_geom.py index b91935223..2199c666e 100755 --- a/src/GEOM_SWIG/GEOM_tube_geom.py +++ b/src/GEOM_SWIG/GEOM_tube_geom.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# #============================================================================== # Info. # Bug (from script, bug) : tube_geom_corrected.py, PAL5243 diff --git a/src/GEOM_SWIG/GEOM_tube_geom_gg2.py b/src/GEOM_SWIG/GEOM_tube_geom_gg2.py index 29f77815f..59b3e4840 100755 --- a/src/GEOM_SWIG/GEOM_tube_geom_gg2.py +++ b/src/GEOM_SWIG/GEOM_tube_geom_gg2.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# #============================================================================== # Info. # Bug (from script, bug) : tube_geom_gg2_corrected.py, PAL5243 @@ -142,16 +161,19 @@ assemblageId = addToStudy(assemblage, "assemblage") # # Display # -gg.createAndDisplayGO(baseId) -gg.setTransparency(baseId,0.5) -gg.setDisplayMode(baseId,1) -gg.setColor(baseId,255,0,0) -gg.createAndDisplayGO(travId) -gg.setTransparency(travId,0.5) -gg.setDisplayMode(travId,1) -gg.setColor(travId,255,0,0) -gg.createAndDisplayGO(weldId) -gg.setTransparency(weldId,0.5) -gg.setDisplayMode(weldId,1) -gg.setColor(weldId,0,0,255) - +gg = ImportComponentGUI("GEOM") +import salome_ComponentGUI +if not isinstance(gg, type(salome_ComponentGUI)): + gg.initGeomGen() + gg.createAndDisplayGO(baseId) + gg.setTransparency(baseId,0.5) + gg.setDisplayMode(baseId,1) + gg.setColor(baseId,255,0,0) + gg.createAndDisplayGO(travId) + gg.setTransparency(travId,0.5) + gg.setDisplayMode(travId,1) + gg.setColor(travId,255,0,0) + gg.createAndDisplayGO(weldId) + gg.setTransparency(weldId,0.5) + gg.setDisplayMode(weldId,1) + gg.setColor(weldId,0,0,255) diff --git a/src/GEOM_SWIG/PAL_MESH_019_020_geometry.py b/src/GEOM_SWIG/PAL_MESH_019_020_geometry.py index 68d54f14f..ce9c0e9a8 100755 --- a/src/GEOM_SWIG/PAL_MESH_019_020_geometry.py +++ b/src/GEOM_SWIG/PAL_MESH_019_020_geometry.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# ##################################################################################### #Created :17/02/2005 #Auhtor :KOVALTCHUK Alexey diff --git a/src/GEOM_SWIG/PAL_MESH_028_geometry.py b/src/GEOM_SWIG/PAL_MESH_028_geometry.py index cd4aa6cf4..262983cb6 100755 --- a/src/GEOM_SWIG/PAL_MESH_028_geometry.py +++ b/src/GEOM_SWIG/PAL_MESH_028_geometry.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# ##################################################################### #Created :17/02/2005 #Auhtor :KOVALTCHUK Alexey diff --git a/src/GEOM_SWIG/PAL_MESH_030_geometry.py b/src/GEOM_SWIG/PAL_MESH_030_geometry.py index 374cbf922..c8c943e25 100755 --- a/src/GEOM_SWIG/PAL_MESH_030_geometry.py +++ b/src/GEOM_SWIG/PAL_MESH_030_geometry.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# #============================================================================== # Created : 17/02/2005 # Author : Alexander KOVALEV diff --git a/src/GEOM_SWIG/PAL_MESH_033_geometry.py b/src/GEOM_SWIG/PAL_MESH_033_geometry.py index 0040b33ca..0e2ed314d 100755 --- a/src/GEOM_SWIG/PAL_MESH_033_geometry.py +++ b/src/GEOM_SWIG/PAL_MESH_033_geometry.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# ##################################################################### #Created :17/02/2005 #Auhtor :KOVALTCHUK Alexey diff --git a/src/GEOM_SWIG/PAL_MESH_035_geometry.py b/src/GEOM_SWIG/PAL_MESH_035_geometry.py index ef3fe52e2..a215e3efb 100755 --- a/src/GEOM_SWIG/PAL_MESH_035_geometry.py +++ b/src/GEOM_SWIG/PAL_MESH_035_geometry.py @@ -1,3 +1,22 @@ +# Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ +# ##################################################################### #Created :15/02/2005 #Auhtor :KOVALTCHUK Alexey diff --git a/src/GEOM_SWIG/geompy.py b/src/GEOM_SWIG/geompy.py index cef51da44..339b969c8 100644 --- a/src/GEOM_SWIG/geompy.py +++ b/src/GEOM_SWIG/geompy.py @@ -36,8 +36,8 @@ import GEOM g = lcc.FindOrLoadComponent("FactoryServer", "GEOM") geom = g._narrow( GEOM.GEOM_Gen ) -gg = ImportComponentGUI("GEOM") -gg.initGeomGen() +#gg = ImportComponentGUI("GEOM") +#gg.initGeomGen() #SRN: modified on Mar 18, 2005 diff --git a/src/MeasureGUI/MeasureGUI_Skeleton_QTD.cxx b/src/MeasureGUI/MeasureGUI_Skeleton_QTD.cxx index 8b3ed9c68..4e4d19cee 100644 --- a/src/MeasureGUI/MeasureGUI_Skeleton_QTD.cxx +++ b/src/MeasureGUI/MeasureGUI_Skeleton_QTD.cxx @@ -1,3 +1,22 @@ +// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. +// +// This library is distributed in the hope that it will be useful +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. +// +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// See http://www.salome-platform.org/ +// /**************************************************************************** ** Form implementation generated from reading ui file 'MeasureGUI_Skeleton_QTD.ui' ** diff --git a/src/MeasureGUI/MeasureGUI_Skeleton_QTD.h b/src/MeasureGUI/MeasureGUI_Skeleton_QTD.h index 3aa608a4d..ab45a8cf2 100644 --- a/src/MeasureGUI/MeasureGUI_Skeleton_QTD.h +++ b/src/MeasureGUI/MeasureGUI_Skeleton_QTD.h @@ -1,3 +1,22 @@ +// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. +// +// This library is distributed in the hope that it will be useful +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. +// +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// See http://www.salome-platform.org/ +// /**************************************************************************** ** Form interface generated from reading ui file 'MeasureGUI_Skeleton_QTD.ui' ** -- 2.39.2