$title

diff --git a/resources/StdMeshers.xml b/resources/StdMeshers.xml index d6083f4b0..d267ef1f6 100644 --- a/resources/StdMeshers.xml +++ b/resources/StdMeshers.xml @@ -1,7 +1,7 @@ Opaque @@ -2059,6 +2187,10 @@ Consider saving your work before application crash STB_2D_FROM_3D Create 2D mesh from 3D + + STB_MESH_ORDER + Change submesh priority + STB_CREATE_GROUP Create Group @@ -2409,6 +2541,10 @@ Consider saving your work before application crash STB_TRANS Translation + + STB_SCALE + Scale Transform + STB_TRANSP Transparency @@ -2565,6 +2701,10 @@ Consider saving your work before application crash TOP_2D_FROM_3D Create 2D mesh from 3D + + TOP_MESH_ORDER + Change submesh priority + TOP_CREATE_GROUP Create Group @@ -2915,6 +3055,10 @@ Consider saving your work before application crash TOP_TRANS Translation + + TOP_SCALE + Scale Transform + TOP_TRANSP Transparency @@ -3023,6 +3167,40 @@ Consider saving your work before application crash NO_MESH_SELECTED No mesh selected + + SMESH_PREF_def_precision + Default precision + + + SMESH_PREF_length_precision + Length precision + + + SMESH_PREF_angle_precision + Angular precision + + + SMESH_PREF_len_tol_precision + Length tolerance precision + + + SMESH_PREF_parametric_precision + Parametric precision + + + SMESH_PREF_area_precision + Area precision + + + SMESH_PREF_vol_precision + Volume precision + + + SMESH_PRECISION_HINT + +Input value precision can be adjusted using +'%1' parameter in Mesh module preferences. + SMESHGUI @@ -3103,6 +3281,10 @@ Please, create VTK viewer and try again PREF_NOTIFY_MODE Show a computation result notification + + SMESH_PREF_GROUP_PRECISION + Input fields precision + PREF_GROUP_ELEMENTS Elements @@ -3151,6 +3333,10 @@ Please, create VTK viewer and try again PREF_LABELS_COLOR Labels color + + PREF_MARKER_SCALE + Scale of marker + PREF_NODES Nodes @@ -3183,10 +3369,6 @@ Please, create VTK viewer and try again PREF_SHRINK_COEFF Shrink coef. - - PREF_SIZE - Size - PREF_TAB_GENERAL General @@ -3203,6 +3385,10 @@ Please, create VTK viewer and try again PREF_TITLE_COLOR Title color + + PREF_TYPE_OF_MARKER + Type of marker + PREF_COLOR_0D 0D elements @@ -3375,6 +3561,15 @@ Please, create VTK viewer and try again created during preview operation. Do you want to remove all this submeshes? + + SMESH_WRN_NOTHING_PREVIEW + No mesh preview is available + + + SMESH_REJECT_MESH_ORDER + The submesh priority changed during preview operation. +Do you want to restore original submesh priority? + SMESHGUI_ConvToQuadDlg @@ -4264,6 +4459,37 @@ Please specify them and try again Mesh to modify not selected + + SMESHGUI_FindElemByPointDlg + + CAPTION + Find Element by Point + + + CREATE_NEW_METHOD + Create a node + + + MESH_PASS_THROUGH_POINT + Make a node at point + + + METHOD + Method + + + MOVE_EXISTING_METHOD + Move a node + + + NODE_2MOVE + Node to move + + + NODE_2MOVE_ID + ID + + SMESHGUI_MeshDlg @@ -4592,6 +4818,25 @@ It is impossible to read point coordinates from file Use numeric functor + + SMESHGUI_CuttingIntoTetraDlg + + CAPTION + Splitting volumes into tetrahedra + + + SPLIT_METHOD + Split hexahedron + + + SPLIT_HEX_TO_5_TETRA + Into 5 tetrahedra + + + SPLIT_HEX_TO_6_TETRA + Into 6 tetrahedra + + SMESHGUI_PrecisionDlg @@ -4712,6 +4957,7 @@ It is impossible to read point coordinates from file MERGE_EQUAL_ELEMENTS Merge equal elements + NODE1_TO_MERGE Node 1 To Merge @@ -4864,4 +5110,77 @@ It is impossible to read point coordinates from file Create Groups from Geometry + + SMESHGUI_MeshOrderDlg + + SMESH_MESHORDER_TITLE + Order of submesh in meshing process + + + + SMESHGUI_MeshOrderOp + + SMESH_NO_CONCURENT_MESH + No concurent submeshes detected + + + + SMESHGUI_ClippingDlg + + CLIP_PLANES + Clipping planes + + + ROTATION_AROUND_X_Y2Z + Rotation around X (Y to Z): + + + ROTATION_AROUND_Y_X2Z + Rotation around Y (X to Z): + + + ROTATION_AROUND_Z_Y2X + Rotation around Z (Y to X): + + + ROTATION_AROUND_X_Z2Y + Rotation around X (Z to Y): + + + ROTATION_AROUND_Y_Z2X + Rotation around Y (Z to X): + + + ROTATION_AROUND_Z_X2Y + Rotation around Z (X to Y): + + + SHOW_PREVIEW + Show preview + + + AUTO_APPLY + Auto Apply + + + ALONG_XY + || X-Y + + + ALONG_YZ + || Y-Z + + + ALONG_ZX + || Z-X + + + PLANE_NUM + Plane# %1 + + + NO_PLANES + No planes + + diff --git a/src/SMESH_I/Makefile.am b/src/SMESH_I/Makefile.am index a2258d6b4..60cd3b312 100644 --- a/src/SMESH_I/Makefile.am +++ b/src/SMESH_I/Makefile.am @@ -1,7 +1,4 @@ -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -# -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses # File : Makefile.in # Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH.hxx b/src/SMESH_I/SMESH.hxx index be211311a..3b8072d49 100644 --- a/src/SMESH_I/SMESH.hxx +++ b/src/SMESH_I/SMESH.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : // File : SMESH.hxx // Author : Michael ZORIN diff --git a/src/SMESH_I/SMESHEngine.cxx b/src/SMESH_I/SMESHEngine.cxx index 0c8d3bd60..1e146a128 100644 --- a/src/SMESH_I/SMESHEngine.cxx +++ b/src/SMESH_I/SMESHEngine.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + int main(int argc, char** argv) { return 1; diff --git a/src/SMESH_I/SMESH_0D_Algo_i.cxx b/src/SMESH_I/SMESH_0D_Algo_i.cxx index cd8247ba9..233fbe8fd 100644 --- a/src/SMESH_I/SMESH_0D_Algo_i.cxx +++ b/src/SMESH_I/SMESH_0D_Algo_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_0D_Algo_i.cxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_0D_Algo_i.hxx b/src/SMESH_I/SMESH_0D_Algo_i.hxx index 401feed17..d98c84f3e 100644 --- a/src/SMESH_I/SMESH_0D_Algo_i.hxx +++ b/src/SMESH_I/SMESH_0D_Algo_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_0D_Algo_i.hxx // Module : SMESH diff --git a/src/SMESH_I/SMESH_1D_Algo_i.cxx b/src/SMESH_I/SMESH_1D_Algo_i.cxx index e5da53f79..393e5b7d0 100644 --- a/src/SMESH_I/SMESH_1D_Algo_i.cxx +++ b/src/SMESH_I/SMESH_1D_Algo_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_1D_Algo_i.cxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_1D_Algo_i.hxx b/src/SMESH_I/SMESH_1D_Algo_i.hxx index 4ae7b0ea5..446d6db9a 100644 --- a/src/SMESH_I/SMESH_1D_Algo_i.hxx +++ b/src/SMESH_I/SMESH_1D_Algo_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_1D_Algo_i.hxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_2D_Algo_i.cxx b/src/SMESH_I/SMESH_2D_Algo_i.cxx index 7fcf5a86d..e859366e1 100644 --- a/src/SMESH_I/SMESH_2D_Algo_i.cxx +++ b/src/SMESH_I/SMESH_2D_Algo_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_2D_Algo_i.cxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_2D_Algo_i.hxx b/src/SMESH_I/SMESH_2D_Algo_i.hxx index 2579278fb..967db7042 100644 --- a/src/SMESH_I/SMESH_2D_Algo_i.hxx +++ b/src/SMESH_I/SMESH_2D_Algo_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_2D_Algo_i.hxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_2smeshpy.cxx b/src/SMESH_I/SMESH_2smeshpy.cxx index 8d3cacc13..640f51191 100644 --- a/src/SMESH_I/SMESH_2smeshpy.cxx +++ b/src/SMESH_I/SMESH_2smeshpy.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,8 +19,8 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses -// // File : SMESH_2smeshpy.cxx // Created : Fri Nov 18 13:20:10 2005 // Author : Edward AGAPOV (eap) @@ -261,6 +261,7 @@ Handle(_pyCommand) _pyGen::AddCommand( const TCollection_AsciiString& theCommand Handle(_pySubMesh) subMesh = new _pySubMesh( aCommand ); myObjects.insert( make_pair( subMeshID, subMesh )); } + id_mesh->second->Process( aCommand ); return aCommand; } @@ -845,7 +846,8 @@ void _pyMesh::Process( const Handle(_pyCommand)& theCommand ) } } // ---------------------------------------------------------------------- - else if ( method == "ExportToMED" ) { // ExportToMED() --> ExportMED() + else if ( method == "ExportToMED" || // ExportToMED() --> ExportMED() + method == "ExportToMEDX" ) { // ExportToMEDX() --> ExportMED() theCommand->SetMethod( "ExportMED" ); } // ---------------------------------------------------------------------- @@ -885,6 +887,34 @@ void _pyMesh::Process( const Handle(_pyCommand)& theCommand ) // remove hyp from myHypos myHypos.remove( hyp ); } + // check for SubMesh order commands + else if ( theCommand->GetMethod() == "GetMeshOrder" || + theCommand->GetMethod() == "SetMeshOrder" ) { + // In fact arguments and result values does not support complex containers + // such as list of list + // So, here we parse it manually + // GetMeshOrder + //for(int ind = 0, n = theCommand->GetNbResultValues();indFindSubMesh( theCommand->GetResultValue(ind) ); + // SetMeshOrder + //for(int ind = 0, n = theCommand->GetNbArgs();indFindSubMesh( theCommand->GetArg(ind) ); + const bool isArg = theCommand->GetMethod() == "SetMeshOrder"; + const TCollection_AsciiString& cmdStr = theCommand->GetString(); + int begPos = (/*isArg ? cmdStr.Search( "(" ) :*/ cmdStr.Search( "[" )) + 1; + int endPos = (isArg ? cmdStr.Search( ")" ) : cmdStr.Search( "=" )) - 1; + if ( begPos != -1 && begPos < endPos && endPos <= cmdStr.Length() ) { + TCollection_AsciiString aSubStr = cmdStr.SubString( begPos, endPos ); + Standard_Integer index = 1; + TCollection_AsciiString anIDStr = aSubStr.Token("\t ,[]", index++); + while ( !anIDStr.IsEmpty() ) { + Handle(_pySubMesh) subMesh = theGen->FindSubMesh( anIDStr ); + if ( !subMesh.IsNull() ) + subMesh->Process( theCommand ); + anIDStr = aSubStr.Token("\t ,[]", index++); + } + } + } // add accessor method if necessary else { @@ -919,7 +949,7 @@ bool _pyMesh::NeedMeshAccess( const Handle(_pyCommand)& theCommand ) "GetNodeInverseElements","GetShapeID","GetShapeIDForElem","GetElemNbNodes", "GetElemNode","IsMediumNode","IsMediumNodeOfAnyElem","ElemNbEdges","ElemNbFaces", "IsPoly","IsQuadratic","BaryCenter","GetHypothesisList", "SetAutoColor", "GetAutoColor", - "Clear", "ConvertToStandalone" + "Clear", "ConvertToStandalone", "GetMeshOrder", "SetMeshOrder" ,"" }; // <- mark of end sameMethods.Insert( names ); } @@ -1276,6 +1306,19 @@ Handle(_pyHypothesis) _pyHypothesis::NewHypothesis( const Handle(_pyCommand)& th else if ( hypType == "TrianglePreference" ) { hyp->SetConvMethodAndType( "TrianglePreference", "Quadrangle_2D"); } + // RadialQuadrangle_1D2D ---------- + else if ( hypType == "RadialQuadrangle_1D2D" ) { + algo->SetConvMethodAndType( "Quadrangle" , hypType.ToCString()); + algo->myArgs.Append( "algo=smesh.RADIAL_QUAD" ); + } + else if ( hypType == "NumberOfLayers2D" ) { + hyp->SetConvMethodAndType( "NumberOfLayers", "RadialQuadrangle_1D2D"); + hyp->AddArgMethod( "SetNumberOfLayers" ); + } + else if ( hypType == "LayerDistribution2D" ) { + hyp = new _pyLayerDistributionHypo( theCreationCmd, "Get2DHypothesis" ); + hyp->SetConvMethodAndType( "LayerDistribution", "RadialQuadrangle_1D2D"); + } // BLSURF ---------- else if ( hypType == "BLSURF" ) { algo->SetConvMethodAndType( "Triangle", hypType.ToCString()); @@ -1375,14 +1418,11 @@ Handle(_pyHypothesis) _pyHypothesis::NewHypothesis( const Handle(_pyCommand)& th hyp->AddArgMethod( "SetNumberOfLayers" ); } else if ( hypType == "LayerDistribution" ) { - hyp = new _pyLayerDistributionHypo( theCreationCmd ); + hyp = new _pyLayerDistributionHypo( theCreationCmd, "Get3DHypothesis" ); hyp->SetConvMethodAndType( "LayerDistribution", "RadialPrism_3D"); } - if ( algo->IsValid() ) { - return algo; - } - return hyp; + return algo->IsValid() ? algo : hyp; } //================================================================================ @@ -1615,46 +1655,10 @@ void _pyLayerDistributionHypo::Process( const Handle(_pyCommand)& theCommand) my1dHyp->ClearAllCommands(); } my1dHyp = hyp1d; - if ( my1dHyp.IsNull() ) - return; // something wrong :( - - // make a new name for 1D hyp = "HypType" + "_Distribution" - if ( my1dHyp->GetCreationCmd()->GetMethod() == "CreateHypothesis" ) { - // not yet converted creation cmd - TCollection_AsciiString hypTypeQuoted = my1dHyp->GetCreationCmd()->GetArg(1); - TCollection_AsciiString hypType = hypTypeQuoted.SubString( 2, hypTypeQuoted.Length() - 1 ); - newName = hypType + "_Distribution"; - my1dHyp->GetCreationCmd()->SetResultValue( newName ); - } - else { - // already converted creation cmd - newName = my1dHyp->GetCreationCmd()->GetResultValue(); - } - // as creation of 1D hyp was written later then it's edition, - // we need to find all it's edition calls and process them - list< Handle(_pyCommand) >& cmds = theGen->GetCommands(); - list< Handle(_pyCommand) >::iterator cmdIt = cmds.begin(); - for ( ; cmdIt != cmds.end(); ++cmdIt ) { - const _pyID& objID = (*cmdIt)->GetObject(); - if ( objID == hyp1dID ) { - my1dHyp->Process( *cmdIt ); - my1dHyp->GetCreationCmd()->AddDependantCmd( *cmdIt ); - ( *cmdIt )->SetObject( newName ); - } - } if ( !myArgCommands.empty() ) myArgCommands.front()->Clear(); - theCommand->SetArg( 1, newName ); myArgCommands.push_back( theCommand ); - // copy hyp1d's creation method and args -// myCreationMethod = hyp1d->GetCreationMethod(); -// myArgs = hyp1d->GetArgs(); -// // make them cleared at conversion -// myArgCommands = hyp1d->GetArgCommands(); - -// // to be cleared at convertion only -// myArgCommands.push_back( theCommand ); } //================================================================================ @@ -1679,20 +1683,23 @@ bool _pyLayerDistributionHypo::Addition2Creation( const Handle(_pyCommand)& theA _pyID geom = theAdditionCmd->GetArg( 1 ); - my1dHyp->SetMesh( theMesh ); - if ( !my1dHyp->Addition2Creation( theAdditionCmd, theMesh )) - return false; + Handle(_pyHypothesis) algo = theGen->FindAlgo( geom, theMesh, this ); + if ( !algo.IsNull() ) + { + my1dHyp->SetMesh( theMesh ); + my1dHyp->SetConvMethodAndType(my1dHyp->GetAlgoCreationMethod().ToCString(), + algo->GetAlgoType().ToCString()); + if ( !my1dHyp->Addition2Creation( theAdditionCmd, theMesh )) + return false; - // clear "SetLayerDistribution()" cmd - myArgCommands.front()->Clear(); + // clear "SetLayerDistribution()" cmd + myArgCommands.back()->Clear(); - // Convert my creation => me = RadialPrismAlgo.Get3DHypothesis() + // Convert my creation => me = RadialPrismAlgo.Get3DHypothesis() - // find RadialPrism algo created on for theMesh - Handle(_pyHypothesis) algo = theGen->FindAlgo( geom, theMesh, this ); - if ( !algo.IsNull() ) { + // find RadialPrism algo created on for theMesh GetCreationCmd()->SetObject( algo->GetID() ); - GetCreationCmd()->SetMethod( "Get3DHypothesis" ); + GetCreationCmd()->SetMethod( myAlgoMethod ); GetCreationCmd()->RemoveArgs(); theAdditionCmd->AddDependantCmd( GetCreationCmd() ); myIsWrapped = true; @@ -1708,8 +1715,38 @@ bool _pyLayerDistributionHypo::Addition2Creation( const Handle(_pyCommand)& theA void _pyLayerDistributionHypo::Flush() { - //my1dHyp.Nullify(); - //_pyHypothesis::Flush(); + // as creation of 1D hyp was written later then it's edition, + // we need to find all it's edition calls and process them + if ( !my1dHyp.IsNull() ) + { + _pyID hyp1dID = my1dHyp->GetCreationCmd()->GetResultValue(); + + // make a new name for 1D hyp = "HypType" + "_Distribution" + _pyID newName; + if ( my1dHyp->IsWrapped() ) { + newName = my1dHyp->GetCreationCmd()->GetMethod(); + } + else { + TCollection_AsciiString hypTypeQuoted = my1dHyp->GetCreationCmd()->GetArg(1); + newName = hypTypeQuoted.SubString( 2, hypTypeQuoted.Length() - 1 ); + } + newName += "_Distribution"; + my1dHyp->GetCreationCmd()->SetResultValue( newName ); + + list< Handle(_pyCommand) >& cmds = theGen->GetCommands(); + list< Handle(_pyCommand) >::iterator cmdIt = cmds.begin(); + for ( ; cmdIt != cmds.end(); ++cmdIt ) { + const _pyID& objID = (*cmdIt)->GetObject(); + if ( objID == hyp1dID ) { + my1dHyp->Process( *cmdIt ); + my1dHyp->GetCreationCmd()->AddDependantCmd( *cmdIt ); + ( *cmdIt )->SetObject( newName ); + } + } + // Set new hyp name to SetLayerDistribution() cmd + if ( !myArgCommands.empty() && !myArgCommands.back()->IsEmpty() ) + myArgCommands.back()->SetArg( 1, newName ); + } } //================================================================================ diff --git a/src/SMESH_I/SMESH_2smeshpy.hxx b/src/SMESH_I/SMESH_2smeshpy.hxx index 16926e54d..c5ad5122a 100644 --- a/src/SMESH_I/SMESH_2smeshpy.hxx +++ b/src/SMESH_I/SMESH_2smeshpy.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : SMESH_smesh.hxx // Created : Fri Nov 18 12:05:18 2005 // Author : Edward AGAPOV (eap) @@ -113,7 +114,7 @@ public: int GetOrderNb() const { return myOrderNb; } void SetOrderNb( int theNb ) { myOrderNb = theNb; } int Length() { return myString.Length(); } - void Clear() { myString.Clear(); myBegPos.Clear(); } + void Clear() { myString.Clear(); myBegPos.Clear(); myArgs.Clear(); } bool IsEmpty() const { return myString.IsEmpty(); } TCollection_AsciiString GetIndentation(); const TCollection_AsciiString & GetResultValue(); @@ -373,9 +374,10 @@ DEFINE_STANDARD_HANDLE (_pyComplexParamHypo, _pyHypothesis); class _pyLayerDistributionHypo: public _pyHypothesis { Handle(_pyHypothesis) my1dHyp; + TCollection_AsciiString myAlgoMethod; public: - _pyLayerDistributionHypo(const Handle(_pyCommand)& theCreationCmd): - _pyHypothesis(theCreationCmd) {} + _pyLayerDistributionHypo(const Handle(_pyCommand)& theCreationCmd, const char* algoMethod): + _pyHypothesis(theCreationCmd), myAlgoMethod((char*)algoMethod) {} void Process( const Handle(_pyCommand)& theCommand); void Flush(); bool Addition2Creation( const Handle(_pyCommand)& theAdditionCmd, diff --git a/src/SMESH_I/SMESH_3D_Algo_i.cxx b/src/SMESH_I/SMESH_3D_Algo_i.cxx index 8aa242ba6..d72a20fb2 100644 --- a/src/SMESH_I/SMESH_3D_Algo_i.cxx +++ b/src/SMESH_I/SMESH_3D_Algo_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_3D_Algo_i.cxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_3D_Algo_i.hxx b/src/SMESH_I/SMESH_3D_Algo_i.hxx index 4352e7296..384a07aa1 100644 --- a/src/SMESH_I/SMESH_3D_Algo_i.hxx +++ b/src/SMESH_I/SMESH_3D_Algo_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_3D_Algo_i.hxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_Algo_i.cxx b/src/SMESH_I/SMESH_Algo_i.cxx index e567a15d6..32e580ff9 100644 --- a/src/SMESH_I/SMESH_Algo_i.cxx +++ b/src/SMESH_I/SMESH_Algo_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Algo_i.cxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_Algo_i.hxx b/src/SMESH_I/SMESH_Algo_i.hxx index cfcfc5347..d511c50f9 100644 --- a/src/SMESH_I/SMESH_Algo_i.hxx +++ b/src/SMESH_I/SMESH_Algo_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Algo_i.hxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_DumpPython.cxx b/src/SMESH_I/SMESH_DumpPython.cxx index 5b012b59c..5be4f5de4 100644 --- a/src/SMESH_I/SMESH_DumpPython.cxx +++ b/src/SMESH_I/SMESH_DumpPython.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : SMESH_Gen_i_DumpPython.cxx // Created : Thu Mar 24 17:17:59 2005 // Author : Julia DOROVSKIKH @@ -208,6 +209,32 @@ namespace SMESH return *this; } + TPythonDump& + TPythonDump:: + operator<<(SMESH::SMESH_Hypothesis_ptr theArg) + { + SALOMEDS::Study_var aStudy = SMESH_Gen_i::GetSMESHGen()->GetCurrentStudy(); + SALOMEDS::SObject_var aSObject = SMESH_Gen_i::ObjectToSObject(aStudy,theArg); + if(aSObject->_is_nil() && !CORBA::is_nil(theArg)) + myStream << "hyp_" << theArg->GetId(); + else + *this << CORBA::Object_ptr( theArg ); + return *this; + } + + TPythonDump& + TPythonDump:: + operator<<(SMESH::SMESH_IDSource_ptr theArg) + { + SMESH_Gen_i* aSMESHGen = SMESH_Gen_i::GetSMESHGen(); + SALOMEDS::Study_var aStudy = aSMESHGen->GetCurrentStudy(); + SALOMEDS::SObject_var aSObject = SMESH_Gen_i::ObjectToSObject(aStudy,theArg); + if(!aSObject->_is_nil() || CORBA::is_nil( theArg )) + return *this << aSObject; + SMESH::long_array_var anElementsId = theArg->GetIDs(); + return *this << anElementsId; + } + TPythonDump& TPythonDump:: operator<<(SMESH::FilterLibrary_i* theArg) @@ -484,9 +511,7 @@ Engines::TMPFile* SMESH_Gen_i::DumpPython (CORBA::Object_ptr theStudy, TCollection_AsciiString aSavedTrace (oldValue); // Add trace of API methods calls and replace study entries by names - TCollection_AsciiString aScript = - "# -*- coding: iso-8859-1 -*-\n" - "### This file is generated by SALOME automatically by dump python functionality of SMESH component\n\n"; + TCollection_AsciiString aScript; aScript += DumpPython_impl(aStudy, aMap, aMapNames, isPublished, isValidScript, aSavedTrace); diff --git a/src/SMESH_I/SMESH_Filter_i.cxx b/src/SMESH_I/SMESH_Filter_i.cxx index e9370beda..969ffb613 100644 --- a/src/SMESH_I/SMESH_Filter_i.cxx +++ b/src/SMESH_I/SMESH_Filter_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Filter_i.cxx // Author : Alexey Petrov, OCC diff --git a/src/SMESH_I/SMESH_Filter_i.hxx b/src/SMESH_I/SMESH_Filter_i.hxx index 44cc246bf..057c7693b 100644 --- a/src/SMESH_I/SMESH_Filter_i.hxx +++ b/src/SMESH_I/SMESH_Filter_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Filter_i.hxx // Author : Alexey Petrov, OCC diff --git a/src/SMESH_I/SMESH_Gen_i.cxx b/src/SMESH_I/SMESH_Gen_i.cxx index b00a7e8a0..6db942604 100644 --- a/src/SMESH_I/SMESH_Gen_i.cxx +++ b/src/SMESH_I/SMESH_Gen_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Gen_i.cxx // Author : Paul RASCLE, EDF @@ -54,6 +55,7 @@ #ifdef WNT #include + #include #else #include #endif @@ -107,10 +109,12 @@ #include "OpUtil.hxx" #include CORBA_CLIENT_HEADER(SALOME_ModuleCatalog) +#include CORBA_CLIENT_HEADER(SALOME_Session) #include "GEOM_Client.hxx" #include "Utils_ExceptHandlers.hxx" #include "memoire.h" +#include "Basics_Utils.hxx" #include @@ -280,6 +284,28 @@ SMESH_Gen_i::SMESH_Gen_i( CORBA::ORB_ptr orb, // set it in standalone mode only //OSD::SetSignal( true ); + + // 0020605: EDF 1190 SMESH: Display performance. 80 seconds for 52000 cells. + // find out mode (embedded or standalone) here else + // meshes created before calling SMESH_Client::GetSMESHGen(), which calls + // SMESH_Gen_i::SetEmbeddedMode(), have wrong IsEmbeddedMode flag + if ( SALOME_NamingService* ns = GetNS() ) + { + CORBA::Object_var obj = ns->Resolve( "/Kernel/Session" ); + SALOME::Session_var session = SALOME::Session::_narrow( obj ) ; + if ( !session->_is_nil() ) + { + CORBA::String_var s_host = session->getHostname(); + CORBA::Long s_pid = session->getPID(); + string my_host = Kernel_Utils::GetHostname(); +#ifdef WNT + long my_pid = (long)_getpid(); +#else + long my_pid = (long) getpid(); +#endif + SetEmbeddedMode( s_pid == my_pid && my_host == s_host.in() ); + } + } } //============================================================================= @@ -770,7 +796,7 @@ void SMESH_Gen_i::SetBoundaryBoxSegmentation( CORBA::Long theNbSegments ) void SMESH_Gen_i::SetDefaultNbSegments(CORBA::Long theNbSegments) throw ( SALOME::SALOME_Exception ) { - if ( theNbSegments ) + if ( theNbSegments > 0 ) myGen.SetDefaultNbSegments( int(theNbSegments) ); else THROW_SALOME_CORBA_EXCEPTION( "non-positive number of segments", SALOME::BAD_PARAM ); @@ -1666,13 +1692,22 @@ SMESH::long_array* SMESH_Gen_i::Evaluate(SMESH::SMESH_Mesh_ptr theMesh, MapShapeNbElemsItr anIt = aResMap.begin(); for(; anIt!=aResMap.end(); anIt++) { const vector& aVec = (*anIt).second; - for(i = SMESH::Entity_Node; i < SMESH::Entity_Last; i++) { - nbels[i] += aVec[i]; + for(i = SMESH::Entity_Node; i < aVec.size(); i++) { + int nbElem = aVec[i]; + if ( nbElem < 0 ) // algo failed, check that it has reported a message + { + SMESH_subMesh* sm = anIt->first; + SMESH_ComputeErrorPtr& error = sm->GetComputeError(); + const SMESH_Algo* algo = myGen.GetAlgo( myLocMesh, sm->GetSubShape()); + if ( algo && !error.get() || error->IsOK() ) + error.reset( new SMESH_ComputeError( COMPERR_ALGO_FAILED,"Failed to evaluate",algo)); + } + else + { + nbels[i] += aVec[i]; + } } } -#ifdef _DEBUG_ - cout<GetNbMeshes( &anErr ); + if( anErr >= 0 ) { + aResult->length( aNbMeshes ); + for( MED::TInt i = 0; i < aNbMeshes; i++ ) { + MED::PMeshInfo aMeshInfo = aMed->GetPMeshInfo( i+1 ); + aResult[i] = CORBA::string_dup( aMeshInfo->GetName().c_str() ); + } + } + return aResult._retn(); +} + //============================================================================= /*! * SMESH_Gen_i::Save @@ -2726,6 +2804,40 @@ SALOMEDS::TMPFile* SMESH_Gen_i::Save( SALOMEDS::SComponent_ptr theComponent, //if ( shapeRefFound ) //myWriter.AddAllSubMeshes(); + // store submesh order if any + const TListOfListOfInt& theOrderIds = myLocMesh.GetMeshOrder(); + if ( theOrderIds.size() ) { + char order_list[ 30 ]; + strcpy( order_list, "Mesh Order" ); + // count number of submesh ids + int nbIDs = 0; + TListOfListOfInt::const_iterator idIt = theOrderIds.begin(); + for ( ; idIt != theOrderIds.end(); idIt++ ) + nbIDs += (*idIt).size(); + // number of values = number of IDs + + // number of lists (for separators) - 1 + int* smIDs = new int [ nbIDs + theOrderIds.size() - 1 ]; + idIt = theOrderIds.begin(); + for ( int i = 0; idIt != theOrderIds.end(); idIt++ ) { + const TListOfInt& idList = *idIt; + if (idIt != theOrderIds.begin()) // not first list + smIDs[ i++ ] = -1/* *idList.size()*/; // separator between lists + // dump submesh ids from current list + TListOfInt::const_iterator id_smId = idList.begin(); + for( ; id_smId != idList.end(); id_smId++ ) + smIDs[ i++ ] = *id_smId; + } + // write HDF group + aSize[ 0 ] = nbIDs + theOrderIds.size() - 1; + + aDataset = new HDFdataset( order_list, aTopGroup, HDF_INT32, aSize, 1 ); + aDataset->CreateOnDisk(); + aDataset->WriteOnDisk( smIDs ); + aDataset->CloseOnDisk(); + // + delete[] smIDs; + } + // groups root sub-branch SALOMEDS::SObject_var myGroupsBranch; for ( int i = GetNodeGroupsTag(); i <= GetVolumeGroupsTag(); i++ ) { @@ -2910,7 +3022,7 @@ SALOMEDS::TMPFile* SMESH_Gen_i::Save( SALOMEDS::SComponent_ptr theComponent, aDataset->WriteOnDisk( smIDs ); aDataset->CloseOnDisk(); // - delete smIDs; + delete[] smIDs; } // Store node positions on sub-shapes (SMDS_Position): @@ -2940,6 +3052,8 @@ SALOMEDS::TMPFile* SMESH_Gen_i::Save( SALOMEDS::SComponent_ptr theComponent, if ( nbNodes == 0 ) continue; int aShapeID = (*itSubM).first; + if ( aShapeID < 1 || aShapeID > mySMESHDSMesh->MaxShapeIndex() ) + continue; int aShapeType = mySMESHDSMesh->IndexToShape( aShapeID ).ShapeType(); // write only SMDS_FacePosition and SMDS_EdgePosition switch ( aShapeType ) { @@ -3498,7 +3612,6 @@ bool SMESH_Gen_i::Load( SALOMEDS::SComponent_ptr theComponent, } } } - } } } @@ -4121,6 +4234,24 @@ bool SMESH_Gen_i::Load( SALOMEDS::SComponent_ptr theComponent, aGroup->CloseOnDisk(); } } + // read submeh order if any + if( aTopGroup->ExistInternalObject( "Mesh Order" ) ) { + aDataset = new HDFdataset( "Mesh Order", aTopGroup ); + aDataset->OpenOnDisk(); + size = aDataset->GetSize(); + int* smIDs = new int[ size ]; + aDataset->ReadFromDisk( smIDs ); + aDataset->CloseOnDisk(); + TListOfListOfInt anOrderIds; + anOrderIds.push_back( TListOfInt() ); + for ( int i = 0; i < size; i++ ) + if ( smIDs[ i ] < 0 ) // is separator + anOrderIds.push_back( TListOfInt() ); + else + anOrderIds.back().push_back(smIDs[ i ]); + + myNewMeshImpl->GetImpl().SetMeshOrder( anOrderIds ); + } } // close mesh group if(aTopGroup) diff --git a/src/SMESH_I/SMESH_Gen_i.hxx b/src/SMESH_I/SMESH_Gen_i.hxx index 13bca294a..89cf79ca7 100644 --- a/src/SMESH_I/SMESH_Gen_i.hxx +++ b/src/SMESH_I/SMESH_Gen_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Gen_i.hxx // Author : Paul RASCLE, EDF @@ -320,6 +321,13 @@ public: CORBA::Double theMergeTolerance) throw ( SALOME::SALOME_Exception ); + // Get MED version of the file by its name + CORBA::Boolean GetMEDVersion(const char* theFileName, + SMESH::MED_VERSION& theVersion); + + // Get names of meshes defined in file with the specified name + SMESH::string_array* GetMeshNames(const char* theFileName); + // **************************************************** // Interface inherited methods (from SALOMEDS::Driver) // **************************************************** diff --git a/src/SMESH_I/SMESH_Gen_i_1.cxx b/src/SMESH_I/SMESH_Gen_i_1.cxx index 2b216fe26..d5161e29f 100644 --- a/src/SMESH_I/SMESH_Gen_i_1.cxx +++ b/src/SMESH_I/SMESH_Gen_i_1.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Gen_i_1.cxx // Created : Thu Oct 21 17:24:06 2004 diff --git a/src/SMESH_I/SMESH_Group_i.cxx b/src/SMESH_I/SMESH_Group_i.cxx index 7502c5409..c69024ed2 100644 --- a/src/SMESH_I/SMESH_Group_i.cxx +++ b/src/SMESH_I/SMESH_Group_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's classes // File : SMESH_Group_i.cxx // Author : Sergey ANIKIN, OCC @@ -165,11 +166,12 @@ SMESH::ElementType SMESH_GroupBase_i::GetType() SMDSAbs_ElementType aSMDSType = aGroupDS->GetType(); SMESH::ElementType aType; switch (aSMDSType) { - case SMDSAbs_Node: aType = SMESH::NODE; break; - case SMDSAbs_Edge: aType = SMESH::EDGE; break; - case SMDSAbs_Face: aType = SMESH::FACE; break; - case SMDSAbs_Volume: aType = SMESH::VOLUME; break; - default: aType = SMESH::ALL; break; + case SMDSAbs_Node: aType = SMESH::NODE; break; + case SMDSAbs_Edge: aType = SMESH::EDGE; break; + case SMDSAbs_Face: aType = SMESH::FACE; break; + case SMDSAbs_Volume: aType = SMESH::VOLUME; break; + case SMDSAbs_0DElement: aType = SMESH::ELEM0D; break; + default: aType = SMESH::ALL; break; } return aType; } diff --git a/src/SMESH_I/SMESH_Group_i.hxx b/src/SMESH_I/SMESH_Group_i.hxx index 93f8354b9..30ea828c0 100644 --- a/src/SMESH_I/SMESH_Group_i.hxx +++ b/src/SMESH_I/SMESH_Group_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's classes // File : SMESH_Group_i.hxx // Author : Sergey ANIKIN, OCC diff --git a/src/SMESH_I/SMESH_Hypothesis_i.cxx b/src/SMESH_I/SMESH_Hypothesis_i.cxx index b677e647b..19d436ff6 100644 --- a/src/SMESH_I/SMESH_Hypothesis_i.cxx +++ b/src/SMESH_I/SMESH_Hypothesis_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Hypothesis_i.cxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_Hypothesis_i.hxx b/src/SMESH_I/SMESH_Hypothesis_i.hxx index 13bd7742f..24c01d46a 100644 --- a/src/SMESH_I/SMESH_Hypothesis_i.hxx +++ b/src/SMESH_I/SMESH_Hypothesis_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Hypothesis_i.hxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_MEDFamily_i.cxx b/src/SMESH_I/SMESH_MEDFamily_i.cxx index 393e49c42..66d26cc0d 100644 --- a/src/SMESH_I/SMESH_MEDFamily_i.cxx +++ b/src/SMESH_I/SMESH_MEDFamily_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_MEDFamily_i.cxx // Module : SMESH diff --git a/src/SMESH_I/SMESH_MEDFamily_i.hxx b/src/SMESH_I/SMESH_MEDFamily_i.hxx index e6af38067..06a13600d 100644 --- a/src/SMESH_I/SMESH_MEDFamily_i.hxx +++ b/src/SMESH_I/SMESH_MEDFamily_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_MEDFamily_i.hxx // Module : SMESH diff --git a/src/SMESH_I/SMESH_MEDMesh_i.cxx b/src/SMESH_I/SMESH_MEDMesh_i.cxx index f73bf1102..b1b093770 100644 --- a/src/SMESH_I/SMESH_MEDMesh_i.cxx +++ b/src/SMESH_I/SMESH_MEDMesh_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_MEDMesh_i.cxx // Module : SMESH diff --git a/src/SMESH_I/SMESH_MEDMesh_i.hxx b/src/SMESH_I/SMESH_MEDMesh_i.hxx index 72b31032e..68fcc96c3 100644 --- a/src/SMESH_I/SMESH_MEDMesh_i.hxx +++ b/src/SMESH_I/SMESH_MEDMesh_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_MEDMesh_i.hxx // Module : SMESH diff --git a/src/SMESH_I/SMESH_MEDSupport_i.cxx b/src/SMESH_I/SMESH_MEDSupport_i.cxx index 4b1e66ddf..c1a8fe548 100644 --- a/src/SMESH_I/SMESH_MEDSupport_i.cxx +++ b/src/SMESH_I/SMESH_MEDSupport_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_MEDSupport_i.cxx // Module : SMESH diff --git a/src/SMESH_I/SMESH_MEDSupport_i.hxx b/src/SMESH_I/SMESH_MEDSupport_i.hxx index 56c36a881..b30528dad 100644 --- a/src/SMESH_I/SMESH_MEDSupport_i.hxx +++ b/src/SMESH_I/SMESH_MEDSupport_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_MEDSupport_i.hxx // Module : SMESH diff --git a/src/SMESH_I/SMESH_MeshEditor_i.cxx b/src/SMESH_I/SMESH_MeshEditor_i.cxx index a5bc40799..0ccfca681 100644 --- a/src/SMESH_I/SMESH_MeshEditor_i.cxx +++ b/src/SMESH_I/SMESH_MeshEditor_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,11 +19,12 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_MeshEditor_i.cxx // Author : Nicolas REJNERI // Module : SMESH - +// #include "SMESH_MeshEditor_i.hxx" #include "SMDS_Mesh0DElement.hxx" @@ -271,6 +272,27 @@ void SMESH_MeshEditor_i::initData(bool deleteSearchers) } } +//======================================================================= +//function : MakeIDSource +//purpose : Wrap a sequence of ids in a SMESH_IDSource +//======================================================================= + +struct _IDSource : public POA_SMESH::SMESH_IDSource +{ + SMESH::long_array _ids; + SMESH::long_array* GetIDs() { return new SMESH::long_array( _ids ); } + SMESH::long_array* GetMeshInfo() { return 0; } +}; + +SMESH::SMESH_IDSource_ptr SMESH_MeshEditor_i::MakeIDSource(const SMESH::long_array& ids) +{ + _IDSource* anIDSource = new _IDSource; + anIDSource->_ids = ids; + SMESH::SMESH_IDSource_var anIDSourceVar = anIDSource->_this(); + + return anIDSourceVar._retn(); +} + //============================================================================= /*! * @@ -290,9 +312,6 @@ SMESH_MeshEditor_i::RemoveElements(const SMESH::long_array & IDsOfElements) // Update Python script TPythonDump() << "isDone = " << this << ".RemoveElements( " << IDsOfElements << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'RemoveElements: ', isDone"; -#endif // Remove Elements return anEditor.Remove( IdList, false ); } @@ -314,9 +333,6 @@ CORBA::Boolean SMESH_MeshEditor_i::RemoveNodes(const SMESH::long_array & IDsOfNo // Update Python script TPythonDump() << "isDone = " << this << ".RemoveNodes( " << IDsOfNodes << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'RemoveNodes: ', isDone"; -#endif return anEditor.Remove( IdList, true ); } @@ -468,14 +484,8 @@ CORBA::Long SMESH_MeshEditor_i::AddPolygonalFace (const SMESH::long_array & IDsO // Update Python script TPythonDump() <<"faceID = "<GetID(); - - return 0; + return elem ? elem->GetID() : 0; } //============================================================================= @@ -517,9 +527,6 @@ CORBA::Long SMESH_MeshEditor_i::AddVolume(const SMESH::long_array & IDsOfNodes) // Update Python script TPythonDump() << "volID = " << this << ".AddVolume( " << IDsOfNodes << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'AddVolume: ', volID"; -#endif if(elem) return elem->GetID(); @@ -552,14 +559,8 @@ CORBA::Long SMESH_MeshEditor_i::AddPolyhedralVolume (const SMESH::long_array & I // Update Python script TPythonDump() << "volID = " << this << ".AddPolyhedralVolume( " << IDsOfNodes << ", " << Quantities << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'AddPolyhedralVolume: ', volID"; -#endif - - if(elem) - return elem->GetID(); - return 0; + return elem ? elem->GetID() : 0; } //============================================================================= @@ -590,14 +591,8 @@ CORBA::Long SMESH_MeshEditor_i::AddPolyhedralVolumeByFaces (const SMESH::long_ar // Update Python script TPythonDump() << "volID = " << this << ".AddPolyhedralVolumeByFaces( " << IdsOfFaces << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'AddPolyhedralVolume: ', volID"; -#endif - - if(elem) - return elem->GetID(); - return 0; + return elem ? elem->GetID() : 0; } //============================================================================= @@ -932,9 +927,6 @@ CORBA::Boolean SMESH_MeshEditor_i::TriToQuad (const SMESH::long_array & IDsOfE // Update Python script TPythonDump() << "isDone = " << this << ".TriToQuad( " << IDsOfElements << ", " << aNumericalFunctor << ", " << MaxAngle << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'TriToQuad: ', isDone"; -#endif ::SMESH_MeshEditor anEditor( myMesh ); @@ -963,9 +955,6 @@ CORBA::Boolean SMESH_MeshEditor_i::TriToQuadObject (SMESH::SMESH_IDSource_ptr // Clear python line(s), created by TriToQuad() SMESH_Gen_i* aSMESHGen = SMESH_Gen_i::GetSMESHGen(); aSMESHGen->RemoveLastFromPythonScript(aSMESHGen->GetCurrentStudyID()); -#ifdef _DEBUG_ - aSMESHGen->RemoveLastFromPythonScript(aSMESHGen->GetCurrentStudyID()); -#endif SMESH::NumericalFunctor_i* aNumericalFunctor = SMESH::DownCast( Criterion ); @@ -973,9 +962,6 @@ CORBA::Boolean SMESH_MeshEditor_i::TriToQuadObject (SMESH::SMESH_IDSource_ptr // Update Python script TPythonDump() << "isDone = " << this << ".TriToQuadObject(" << theObject << ", " << aNumericalFunctor << ", " << MaxAngle << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'TriToQuadObject: ', isDone"; -#endif return isDone; } @@ -1006,9 +992,6 @@ CORBA::Boolean SMESH_MeshEditor_i::QuadToTri (const SMESH::long_array & IDsOfE // Update Python script TPythonDump() << "isDone = " << this << ".QuadToTri( " << IDsOfElements << ", " << aNumericalFunctor << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'QuadToTri: ', isDone"; -#endif ::SMESH_MeshEditor anEditor( myMesh ); CORBA::Boolean stat = anEditor.QuadToTri( faces, aCrit ); @@ -1035,18 +1018,12 @@ CORBA::Boolean SMESH_MeshEditor_i::QuadToTriObject (SMESH::SMESH_IDSource_ptr // Clear python line(s), created by QuadToTri() SMESH_Gen_i* aSMESHGen = SMESH_Gen_i::GetSMESHGen(); aSMESHGen->RemoveLastFromPythonScript(aSMESHGen->GetCurrentStudyID()); -#ifdef _DEBUG_ - aSMESHGen->RemoveLastFromPythonScript(aSMESHGen->GetCurrentStudyID()); -#endif SMESH::NumericalFunctor_i* aNumericalFunctor = SMESH::DownCast( Criterion ); // Update Python script TPythonDump() << "isDone = " << this << ".QuadToTriObject( " << theObject << ", " << aNumericalFunctor << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'QuadToTriObject: ', isDone"; -#endif return isDone; } @@ -1069,9 +1046,6 @@ CORBA::Boolean SMESH_MeshEditor_i::SplitQuad (const SMESH::long_array & IDsOfEle // Update Python script TPythonDump() << "isDone = " << this << ".SplitQuad( " << IDsOfElements << ", " << Diag13 << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'SplitQuad: ', isDone"; -#endif ::SMESH_MeshEditor anEditor( myMesh ); CORBA::Boolean stat = anEditor.QuadToTri( faces, Diag13 ); @@ -1098,16 +1072,10 @@ CORBA::Boolean SMESH_MeshEditor_i::SplitQuadObject (SMESH::SMESH_IDSource_ptr th // Clear python line(s), created by SplitQuad() SMESH_Gen_i* aSMESHGen = SMESH_Gen_i::GetSMESHGen(); aSMESHGen->RemoveLastFromPythonScript(aSMESHGen->GetCurrentStudyID()); -#ifdef _DEBUG_ - aSMESHGen->RemoveLastFromPythonScript(aSMESHGen->GetCurrentStudyID()); -#endif // Update Python script TPythonDump() << "isDone = " << this << ".SplitQuadObject( " << theObject << ", " << Diag13 << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'SplitQuadObject: ', isDone"; -#endif return isDone; } @@ -1138,6 +1106,28 @@ CORBA::Long SMESH_MeshEditor_i::BestSplit (CORBA::Long IDOfQuad, return -1; } +//================================================================================ +/*! + * \brief Split volumic elements into tetrahedrons + */ +//================================================================================ + +void SMESH_MeshEditor_i::SplitVolumesIntoTetra (SMESH::SMESH_IDSource_ptr elems, + CORBA::Short methodFlags) + throw (SALOME::SALOME_Exception) +{ + Unexpect aCatch(SALOME_SalomeException); + + SMESH::long_array_var anElementsId = elems->GetIDs(); + TIDSortedElemSet elemSet; + arrayToSet( anElementsId, GetMeshDS(), elemSet, SMDSAbs_Volume ); + + ::SMESH_MeshEditor anEditor (myMesh); + anEditor.SplitVolumesIntoTetra( elemSet, int( methodFlags )); + + TPythonDump() << this << ".SplitVolumesIntoTetra( " + << elems << ", " << methodFlags << " )"; +} //======================================================================= //function : Smooth @@ -1253,9 +1243,6 @@ SMESH_MeshEditor_i::smooth(const SMESH::long_array & IDsOfElements, << "SMESH.SMESH_MeshEditor." << ( Method == SMESH::SMESH_MeshEditor::CENTROIDAL_SMOOTH ? "CENTROIDAL_SMOOTH )" : "LAPLACIAN_SMOOTH )"); -#ifdef _DEBUG_ - TPythonDump() << "print 'Smooth: ', isDone"; -#endif return true; } @@ -1284,9 +1271,6 @@ SMESH_MeshEditor_i::smoothObject(SMESH::SMESH_IDSource_ptr theObjec // Clear python line(s), created by Smooth() SMESH_Gen_i* aSMESHGen = SMESH_Gen_i::GetSMESHGen(); aSMESHGen->RemoveLastFromPythonScript(aSMESHGen->GetCurrentStudyID()); -#ifdef _DEBUG_ - aSMESHGen->RemoveLastFromPythonScript(aSMESHGen->GetCurrentStudyID()); -#endif // Update Python script TPythonDump() << "isDone = " << this << "." @@ -1296,9 +1280,6 @@ SMESH_MeshEditor_i::smoothObject(SMESH::SMESH_IDSource_ptr theObjec << "SMESH.SMESH_MeshEditor." << ( Method == SMESH::SMESH_MeshEditor::CENTROIDAL_SMOOTH ? "CENTROIDAL_SMOOTH )" : "LAPLACIAN_SMOOTH )"); -#ifdef _DEBUG_ - TPythonDump() << "print 'SmoothObject: ', isDone"; -#endif return isDone; } @@ -3346,6 +3327,140 @@ SMESH_MeshEditor_i::RotateObjectMakeMesh(SMESH::SMESH_IDSource_ptr theObject, return mesh._retn(); } + +//======================================================================= +//function : scale +//purpose : +//======================================================================= + +SMESH::ListOfGroups* +SMESH_MeshEditor_i::scale(const SMESH::long_array & theIDsOfElements, + const SMESH::PointStruct& thePoint, + const SMESH::double_array& theScaleFact, + CORBA::Boolean theCopy, + const bool theMakeGroups, + ::SMESH_Mesh* theTargetMesh) +{ + initData(); + + TIDSortedElemSet elements; + arrayToSet(theIDsOfElements, GetMeshDS(), elements); + + gp_Pnt aPnt( thePoint.x, thePoint.y, thePoint.z ); + list aScaleFact; + for (int i = 0; i < theScaleFact.length(); i++) { + aScaleFact.push_back( theScaleFact[i] ); + } + + ::SMESH_MeshEditor anEditor( myMesh ); + ::SMESH_MeshEditor::PGroupIDs groupIds = + anEditor.Scale (elements, aPnt, aScaleFact, theCopy, + theMakeGroups, theTargetMesh); + + if(theCopy) + storeResult(anEditor); + + return theMakeGroups ? getGroups(groupIds.get()) : 0; +} + + +//======================================================================= +//function : Scale +//purpose : +//======================================================================= + +void SMESH_MeshEditor_i::Scale(SMESH::SMESH_IDSource_ptr theObject, + const SMESH::PointStruct& thePoint, + const SMESH::double_array& theScaleFact, + CORBA::Boolean theCopy) +{ + if ( !myPreviewMode ) { + TPythonDump() << this << ".Scale( " + << theObject << ", " + << "SMESH.PointStruct( " << thePoint.x << ", " + << thePoint.y << ", " << thePoint.z << " ) ," + << theScaleFact << ", " + << theCopy << " )"; + } + SMESH::long_array_var anElementsId = theObject->GetIDs(); + scale(anElementsId, thePoint, theScaleFact, theCopy, false); +} + + +//======================================================================= +//function : ScaleMakeGroups +//purpose : +//======================================================================= + +SMESH::ListOfGroups* +SMESH_MeshEditor_i::ScaleMakeGroups(SMESH::SMESH_IDSource_ptr theObject, + const SMESH::PointStruct& thePoint, + const SMESH::double_array& theScaleFact) +{ + SMESH::long_array_var anElementsId = theObject->GetIDs(); + SMESH::ListOfGroups * aGroups = + scale(anElementsId, thePoint, theScaleFact, true, true); + + if ( !myPreviewMode ) { + + TPythonDump aPythonDump; + DumpGroupsList(aPythonDump,aGroups); + aPythonDump << this << ".Scale(" + << theObject << "," + << "SMESH.PointStruct(" <( mesh ); + + if ( mesh_i ) { + SMESH::long_array_var anElementsId = theObject->GetIDs(); + scale(anElementsId, thePoint, theScaleFact, + false, theCopyGroups, & mesh_i->GetImpl()); + mesh_i->CreateGroupServants(); + } + if ( !myPreviewMode ) { + pydump << mesh << " = " << this << ".ScaleMakeMesh( " + << theObject << ", " + << "SMESH.PointStruct( " << thePoint.x << ", " + << thePoint.y << ", " << thePoint.z << " ) ," + << theScaleFact << ", " + << theCopyGroups << ", '" + << theMeshName << "' )"; + } + } + + //dump "GetGroups" + if(!myPreviewMode && mesh_i) + mesh_i->GetGroups(); + + return mesh._retn(); +} + + //======================================================================= //function : FindCoincidentNodes //purpose : @@ -3731,6 +3846,24 @@ SMESH::long_array* SMESH_MeshEditor_i::FindElementsByPoint(CORBA::Double x, return res._retn(); } +//======================================================================= +//function : GetPointState +//purpose : Return point state in a closed 2D mesh in terms of TopAbs_State enumeration. +// TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails. +//======================================================================= + +CORBA::Short SMESH_MeshEditor_i::GetPointState(CORBA::Double x, + CORBA::Double y, + CORBA::Double z) +{ + theSearchersDeleter.Set( myMesh ); + if ( !theElementSearcher ) { + ::SMESH_MeshEditor anEditor( myMesh ); + theElementSearcher = anEditor.GetElementSearcher(); + } + return CORBA::Short( theElementSearcher->GetPointState( gp_Pnt( x,y,z ))); +} + //======================================================================= //function : convError //purpose : @@ -4017,9 +4150,6 @@ CORBA::Boolean SMESH_MeshEditor_i::ChangeElemNodes(CORBA::Long ide, } TPythonDump() << "isDone = " << this << ".ChangeElemNodes( " << ide << ", " << newIDs << " )"; -#ifdef _DEBUG_ - TPythonDump() << "print 'ChangeElemNodes: ', isDone"; -#endif return GetMeshDS()->ChangeElementNodes( elem, & aNodes[0], nbn1+1 ); } @@ -4573,7 +4703,7 @@ CORBA::Boolean SMESH_MeshEditor_i::DoubleNodeElemGroups( storeResult( aMeshEditor) ; // Update Python script - TPythonDump() << "isDone = " << this << ".DoubleNodeGroups( " << &theElems << ", " + TPythonDump() << "isDone = " << this << ".DoubleNodeElemGroups( " << &theElems << ", " << &theNodesNot << ", " << &theAffectedElems << " )"; return aResult; } diff --git a/src/SMESH_I/SMESH_MeshEditor_i.hxx b/src/SMESH_I/SMESH_MeshEditor_i.hxx index 5c4dd85ca..046573b17 100644 --- a/src/SMESH_I/SMESH_MeshEditor_i.hxx +++ b/src/SMESH_I/SMESH_MeshEditor_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_MeshEditor_i.hxx // Author : Nicolas REJNERI @@ -41,12 +42,18 @@ class SMESH_Mesh_i; class SMESH_MeshEditor_i: public POA_SMESH::SMESH_MeshEditor { - public: +public: SMESH_MeshEditor_i(SMESH_Mesh_i * theMesh, bool isPreview); virtual ~ SMESH_MeshEditor_i(); // --- CORBA + + /*! + * \brief Wrap a sequence of ids in a SMESH_IDSource + */ + SMESH::SMESH_IDSource_ptr MakeIDSource(const SMESH::long_array& IDsOfElements); + CORBA::Boolean RemoveElements(const SMESH::long_array & IDsOfElements); CORBA::Boolean RemoveNodes(const SMESH::long_array & IDsOfNodes); @@ -131,6 +138,8 @@ class SMESH_MeshEditor_i: public POA_SMESH::SMESH_MeshEditor CORBA::Boolean Diag13); CORBA::Long BestSplit (CORBA::Long IDOfQuad, SMESH::NumericalFunctor_ptr Criterion); + void SplitVolumesIntoTetra (SMESH::SMESH_IDSource_ptr elems, + CORBA::Short methodFlags) throw (SALOME::SALOME_Exception); CORBA::Boolean Smooth(const SMESH::long_array & IDsOfElements, const SMESH::long_array & IDsOfFixedNodes, @@ -420,6 +429,21 @@ class SMESH_MeshEditor_i: public POA_SMESH::SMESH_MeshEditor CORBA::Boolean CopyGroups, const char* MeshName); + void Scale(SMESH::SMESH_IDSource_ptr theObject, + const SMESH::PointStruct& thePoint, + const SMESH::double_array& theScaleFact, + CORBA::Boolean theCopy); + + SMESH::ListOfGroups* ScaleMakeGroups(SMESH::SMESH_IDSource_ptr theObject, + const SMESH::PointStruct& thePoint, + const SMESH::double_array& theScaleFact); + + SMESH::SMESH_Mesh_ptr ScaleMakeMesh(SMESH::SMESH_IDSource_ptr Object, + const SMESH::PointStruct& Point, + const SMESH::double_array& theScaleFact, + CORBA::Boolean CopyGroups, + const char* MeshName); + void FindCoincidentNodes (CORBA::Double Tolerance, SMESH::array_of_long_array_out GroupsOfNodes); void FindCoincidentNodesOnPart(SMESH::SMESH_IDSource_ptr Object, @@ -442,7 +466,6 @@ class SMESH_MeshEditor_i: public POA_SMESH::SMESH_MeshEditor CORBA::Double z); /*! * Return elements of given type where the given point is IN or ON. - * * 'ALL' type means elements of any type excluding nodes */ SMESH::long_array* FindElementsByPoint(CORBA::Double x, @@ -450,6 +473,11 @@ class SMESH_MeshEditor_i: public POA_SMESH::SMESH_MeshEditor CORBA::Double z, SMESH::ElementType type); + /*! + * Return point state in a closed 2D mesh in terms of TopAbs_State enumeration. + * TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails. + */ + CORBA::Short GetPointState(CORBA::Double x, CORBA::Double y, CORBA::Double z); SMESH::SMESH_MeshEditor::Sew_Error SewFreeBorders(CORBA::Long FirstNodeID1, @@ -696,6 +724,13 @@ class SMESH_MeshEditor_i: public POA_SMESH::SMESH_MeshEditor const bool MakeGroups, ::SMESH_Mesh* TargetMesh=0); + SMESH::ListOfGroups* scale(const SMESH::long_array & theIDsOfElements, + const SMESH::PointStruct& thePoint, + const SMESH::double_array& theScaleFact, + CORBA::Boolean theCopy, + const bool theMakeGroups, + ::SMESH_Mesh* theTargetMesh=0); + SMESH::SMESH_Mesh_ptr makeMesh(const char* theMeshName); void DumpGroupsList(SMESH::TPythonDump & theDumpPython, diff --git a/src/SMESH_I/SMESH_Mesh_i.cxx b/src/SMESH_I/SMESH_Mesh_i.cxx index 3f5ccd718..9f0101a9a 100644 --- a/src/SMESH_I/SMESH_Mesh_i.cxx +++ b/src/SMESH_I/SMESH_Mesh_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Mesh_i.cxx // Author : Paul RASCLE, EDF @@ -68,8 +69,11 @@ #include #include #include +#include +#include // STL Includes +#include #include #include #include @@ -312,7 +316,7 @@ SMESH_Mesh_i::ImportMEDFile( const char* theFileName, const char* theMeshName ) char* SMESH_Mesh_i::GetVersionString(SMESH::MED_VERSION version, CORBA::Short nbDigits) { - std::string ver = DriverMED_W_SMESHDS_Mesh::GetVersionString(MED::EVersion(version), + string ver = DriverMED_W_SMESHDS_Mesh::GetVersionString(MED::EVersion(version), nbDigits); return CORBA::string_dup( ver.c_str() ); } @@ -1861,7 +1865,6 @@ void SMESH_Mesh_i::CheckGeomGroupModif() //============================================================================= /*! * \brief Create standalone group instead if group on geometry - * */ //============================================================================= @@ -1918,8 +1921,8 @@ SMESH::SMESH_Group_ptr SMESH_Mesh_i::ConvertToStandalone( SMESH::SMESH_GroupOnGe _mapGroups[anId] = SMESH::SMESH_GroupBase::_duplicate( aGroup ); // register CORBA object for persistence - //int nextId = _gen_i->RegisterObject( aGroup ); - //if(MYDEBUG) MESSAGE( "Add group to map with id = "<< nextId); + /*int nextId =*/ _gen_i->RegisterObject( aGroup ); + builder->SetIOR( aGroupSO, _gen_i->GetORB()->object_to_string( aGroup ) ); return aGroup._retn(); @@ -2264,7 +2267,7 @@ CORBA::Boolean SMESH_Mesh_i::HasDuplicatedGroupNamesMED() return _impl->HasDuplicatedGroupNamesMED(); } -void SMESH_Mesh_i::PrepareForWriting (const char* file) +void SMESH_Mesh_i::PrepareForWriting (const char* file, bool overwrite) { TCollection_AsciiString aFullName ((char*)file); OSD_Path aPath (aFullName); @@ -2273,8 +2276,10 @@ void SMESH_Mesh_i::PrepareForWriting (const char* file) // existing filesystem node if (aFile.KindOfFile() == OSD_FILE) { if (aFile.IsWriteable()) { - aFile.Reset(); - aFile.Remove(); + if (overwrite) { + aFile.Reset(); + aFile.Remove(); + } if (aFile.Failed()) { TCollection_AsciiString msg ("File "); msg += aFullName + " cannot be replaced."; @@ -2305,15 +2310,16 @@ void SMESH_Mesh_i::PrepareForWriting (const char* file) } } -void SMESH_Mesh_i::ExportToMED (const char* file, - CORBA::Boolean auto_groups, - SMESH::MED_VERSION theVersion) +void SMESH_Mesh_i::ExportToMEDX (const char* file, + CORBA::Boolean auto_groups, + SMESH::MED_VERSION theVersion, + CORBA::Boolean overwrite) throw(SALOME::SALOME_Exception) { Unexpect aCatch(SALOME_SalomeException); // Perform Export - PrepareForWriting(file); + PrepareForWriting(file, overwrite); const char* aMeshName = "Mesh"; SALOMEDS::Study_ptr aStudy = _gen_i->GetCurrentStudy(); if ( !aStudy->_is_nil() ) { @@ -2345,17 +2351,25 @@ void SMESH_Mesh_i::ExportToMED (const char* file, // check names of groups checkGroupNames(); - TPythonDump() << _this() << ".ExportToMED( '" - << file << "', " << auto_groups << ", " << theVersion << " )"; + TPythonDump() << _this() << ".ExportToMEDX( '" + << file << "', " << auto_groups << ", " << theVersion << ", " << overwrite << " )"; _impl->ExportMED( file, aMeshName, auto_groups, theVersion ); } +void SMESH_Mesh_i::ExportToMED (const char* file, + CORBA::Boolean auto_groups, + SMESH::MED_VERSION theVersion) + throw(SALOME::SALOME_Exception) +{ + ExportToMEDX(file,auto_groups,theVersion,true); +} + void SMESH_Mesh_i::ExportMED (const char* file, CORBA::Boolean auto_groups) throw(SALOME::SALOME_Exception) { - ExportToMED(file,auto_groups,SMESH::MED_V2_1); + ExportToMEDX(file,auto_groups,SMESH::MED_V2_1,true); } void SMESH_Mesh_i::ExportDAT (const char *file) @@ -2612,7 +2626,7 @@ CORBA::Long SMESH_Mesh_i::NbSubMesh()throw(SALOME::SALOME_Exception) //============================================================================= char* SMESH_Mesh_i::Dump() { - std::ostringstream os; + ostringstream os; _impl->Dump( os ); return CORBA::string_dup( os.str().c_str() ); } @@ -2745,6 +2759,21 @@ SMESH::ElementType SMESH_Mesh_i::GetElementType( const CORBA::Long id, const boo return ( SMESH::ElementType )_impl->GetElementType( id, iselem ); } +//============================================================================= +/*! + * + */ +//============================================================================= + +SMESH::EntityType SMESH_Mesh_i::GetElementGeomType( const CORBA::Long id ) + throw (SALOME::SALOME_Exception) +{ + const SMDS_MeshElement* e = _impl->GetMeshDS()->FindElement(id); + if ( !e ) + THROW_SALOME_CORBA_EXCEPTION( "invalid element id", SALOME::BAD_PARAM ); + + return ( SMESH::EntityType ) e->GetEntityType(); +} //============================================================================= /*! @@ -3170,6 +3199,57 @@ CORBA::Long SMESH_Mesh_i::ElemNbFaces(const CORBA::Long id) return elem->NbFaces(); } +//======================================================================= +//function : GetElemFaceNodes +//purpose : Returns nodes of given face (counted from zero) for given element. +//======================================================================= + +SMESH::long_array* SMESH_Mesh_i::GetElemFaceNodes(CORBA::Long elemId, + CORBA::Short faceIndex) +{ + SMESH::long_array_var aResult = new SMESH::long_array(); + if ( SMESHDS_Mesh* aSMESHDS_Mesh = _impl->GetMeshDS() ) + { + if ( const SMDS_MeshElement* elem = aSMESHDS_Mesh->FindElement(elemId) ) + { + SMDS_VolumeTool vtool( elem ); + if ( faceIndex < vtool.NbFaces() ) + { + aResult->length( vtool.NbFaceNodes( faceIndex )); + const SMDS_MeshNode** nn = vtool.GetFaceNodes( faceIndex ); + for ( int i = 0; i < aResult->length(); ++i ) + aResult[ i ] = nn[ i ]->GetID(); + } + } + } + return aResult._retn(); +} + +//======================================================================= +//function : FindElementByNodes +//purpose : Returns an element based on all given nodes. +//======================================================================= + +CORBA::Long SMESH_Mesh_i::FindElementByNodes(const SMESH::long_array& nodes) +{ + CORBA::Long elemID(0); + if ( SMESHDS_Mesh* mesh = _impl->GetMeshDS() ) + { + vector< const SMDS_MeshNode * > nn( nodes.length() ); + for ( int i = 0; i < nodes.length(); ++i ) + if ( !( nn[i] = mesh->FindNode( nodes[i] ))) + return elemID; + + const SMDS_MeshElement* elem = mesh->FindElement( nn ); + if ( !elem && ( _impl->NbEdges( ORDER_QUADRATIC ) || + _impl->NbFaces( ORDER_QUADRATIC ) || + _impl->NbVolumes( ORDER_QUADRATIC ))) + elem = mesh->FindElement( nn, SMDSAbs_All, /*noMedium=*/true ); + + if ( elem ) elemID = CORBA::Long( elem->GetID() ); + } + return elemID; +} //============================================================================= /*! @@ -3461,3 +3541,441 @@ void SMESH_Mesh_i::CollectMeshInfo(const SMDS_ElemIteratorPtr theItr, while (theItr->more()) theInfo[ theItr->next()->GetEntityType() ]++; } + +//============================================================================= +/*! + * \brief mapping of mesh dimension into shape type + */ +//============================================================================= +static TopAbs_ShapeEnum shapeTypeByDim(const int theDim) +{ + TopAbs_ShapeEnum aType = TopAbs_SOLID; + switch ( theDim ) { + case 0: aType = TopAbs_VERTEX; break; + case 1: aType = TopAbs_EDGE; break; + case 2: aType = TopAbs_FACE; break; + case 3: + default:aType = TopAbs_SOLID; break; + } + return aType; +} + +//============================================================================= +/*! + * \brief Internal structure used to find concurent submeshes + * + * It represents a pair < submesh, concurent dimension >, where + * 'concurrent dimension' is dimension of shape where the submesh can concurent + * with another submesh. In other words, it is dimension of a hypothesis assigned + * to submesh. + */ +//============================================================================= + +class SMESH_DimHyp +{ + public: + //! fileds + int _dim; //!< a dimension the algo can build (concurrent dimension) + int _ownDim; //!< dimension of shape of _subMesh (>=_dim) + TopTools_MapOfShape _shapeMap; + SMESH_subMesh* _subMesh; + list _hypothesises; //!< algo is first, then its parameters + + //! Constructors + SMESH_DimHyp(const SMESH_subMesh* theSubMesh, + const int theDim, + const TopoDS_Shape& theShape) + { + _subMesh = (SMESH_subMesh*)theSubMesh; + SetShape( theDim, theShape ); + } + + //! set shape + void SetShape(const int theDim, + const TopoDS_Shape& theShape) + { + _dim = theDim; + _ownDim = (int)SMESH_Gen::GetShapeDim(theShape); + if (_dim >= _ownDim) + _shapeMap.Add( theShape ); + else { + TopExp_Explorer anExp( theShape, shapeTypeByDim(theDim) ); + for( ; anExp.More(); anExp.Next() ) + _shapeMap.Add( anExp.Current() ); + } + } + + //! Check sharing of sub shapes + static bool isShareSubShapes(const TopTools_MapOfShape& theToCheck, + const TopTools_MapOfShape& theToFind, + const TopAbs_ShapeEnum theType) + { + bool isShared = false; + TopTools_MapIteratorOfMapOfShape anItr( theToCheck ); + for (; !isShared && anItr.More(); anItr.Next() ) { + const TopoDS_Shape aSubSh = anItr.Key(); + // check for case when concurrent dimensions are same + isShared = theToFind.Contains( aSubSh ); + // check for subshape with concurrent dimension + TopExp_Explorer anExp( aSubSh, theType ); + for ( ; !isShared && anExp.More(); anExp.Next() ) + isShared = theToFind.Contains( anExp.Current() ); + } + return isShared; + } + + //! check algorithms + static bool checkAlgo(const SMESHDS_Hypothesis* theA1, + const SMESHDS_Hypothesis* theA2) + { + if ( theA1->GetType() == SMESHDS_Hypothesis::PARAM_ALGO || + theA2->GetType() == SMESHDS_Hypothesis::PARAM_ALGO ) + return false; // one of the hypothesis is not algorithm + // check algorithm names (should be equal) + return strcmp( theA1->GetName(), theA2->GetName() ) == 0; + } + + + //! Check if subshape hypotheses are concurrent + bool IsConcurrent(const SMESH_DimHyp* theOther) const + { + if ( _subMesh == theOther->_subMesh ) + return false; // same subshape - should not be + + // if ( == && + // any of the two submeshes is not on COMPOUND shape ) + // -> no concurrency + bool meIsCompound = (_subMesh->GetSubMeshDS() && _subMesh->GetSubMeshDS()->IsComplexSubmesh()); + bool otherIsCompound = (theOther->_subMesh->GetSubMeshDS() && theOther->_subMesh->GetSubMeshDS()->IsComplexSubmesh()); + if ( (_ownDim == _dim || theOther->_ownDim == _dim ) && (!meIsCompound || !otherIsCompound)) + return false; + +// bool checkSubShape = ( _dim >= theOther->_dim ) +// ? isShareSubShapes( _shapeMap, theOther->_shapeMap, shapeTypeByDim(theOther->_dim) ) +// : isShareSubShapes( theOther->_shapeMap, _shapeMap, shapeTypeByDim(_dim) ) ; + bool checkSubShape = isShareSubShapes( _shapeMap, theOther->_shapeMap, shapeTypeByDim(_dim)); + if ( !checkSubShape ) + return false; + + // check algorithms to be same + if (!checkAlgo( _hypothesises.front(), theOther->_hypothesises.front() )) + return true; // different algorithms + + // check hypothesises for concurrence (skip first as algorithm) + int nbSame = 0; + // pointers should be same, becase it is referenes from mesh hypothesis partition + list ::const_iterator hypIt = _hypothesises.begin(); + list ::const_iterator otheEndIt = theOther->_hypothesises.end(); + for ( hypIt++ /*skip first as algo*/; hypIt != _hypothesises.end(); hypIt++ ) + if ( find( theOther->_hypothesises.begin(), otheEndIt, *hypIt ) != otheEndIt ) + nbSame++; + // the submeshes are concurrent if their algorithms has different parameters + return nbSame != theOther->_hypothesises.size() - 1; + } + +}; // end of SMESH_DimHyp + +typedef list TDimHypList; + +static void addDimHypInstance(const int theDim, + const TopoDS_Shape& theShape, + const SMESH_Algo* theAlgo, + const SMESH_subMesh* theSubMesh, + const list & theHypList, + TDimHypList* theDimHypListArr ) +{ + TDimHypList& listOfdimHyp = theDimHypListArr[theDim]; + if ( listOfdimHyp.empty() || listOfdimHyp.back()->_subMesh != theSubMesh ) { + SMESH_DimHyp* dimHyp = new SMESH_DimHyp( theSubMesh, theDim, theShape ); + listOfdimHyp.push_back( dimHyp ); + } + + SMESH_DimHyp* dimHyp = listOfdimHyp.back(); + dimHyp->_hypothesises.push_front(theAlgo); + list ::const_iterator hypIt = theHypList.begin(); + for( ; hypIt != theHypList.end(); hypIt++ ) + dimHyp->_hypothesises.push_back( *hypIt ); +} + +static void findConcurrents(const SMESH_DimHyp* theDimHyp, + const TDimHypList& theListOfDimHyp, + TListOfInt& theListOfConcurr ) +{ + TDimHypList::const_reverse_iterator rIt = theListOfDimHyp.rbegin(); + for ( ; rIt != theListOfDimHyp.rend(); rIt++ ) { + const SMESH_DimHyp* curDimHyp = *rIt; + if ( curDimHyp == theDimHyp ) + break; // meet own dimHyp pointer in same dimension + else if ( theDimHyp->IsConcurrent( curDimHyp ) ) + if ( find( theListOfConcurr.begin(), + theListOfConcurr.end(), + curDimHyp->_subMesh->GetId() ) == theListOfConcurr.end() ) + theListOfConcurr.push_back( curDimHyp->_subMesh->GetId() ); + } +} + +static void unionLists(TListOfInt& theListOfId, + TListOfListOfInt& theListOfListOfId, + const int theIndx ) +{ + TListOfListOfInt::iterator it = theListOfListOfId.begin(); + for ( int i = 0; it != theListOfListOfId.end(); it++, i++ ) { + if ( i < theIndx ) + continue; //skip already treated lists + // check if other list has any same submesh object + TListOfInt& otherListOfId = *it; + if ( find_first_of( theListOfId.begin(), theListOfId.end(), + otherListOfId.begin(), otherListOfId.end() ) == theListOfId.end() ) + continue; + + // union two lists (from source into target) + TListOfInt::iterator it2 = otherListOfId.begin(); + for ( ; it2 != otherListOfId.end(); it2++ ) { + if ( find( theListOfId.begin(), theListOfId.end(), (*it2) ) == theListOfId.end() ) + theListOfId.push_back(*it2); + } + // clear source list + otherListOfId.clear(); + } +} + +//! free memory allocated for dimension-hypothesis objects +static void removeDimHyps( TDimHypList* theArrOfList ) +{ + for (int i = 0; i < 4; i++ ) { + TDimHypList& listOfdimHyp = theArrOfList[i]; + TDimHypList::const_iterator it = listOfdimHyp.begin(); + for ( ; it != listOfdimHyp.end(); it++ ) + delete (*it); + } +} + +//============================================================================= +/*! + * \brief Return submesh objects list in meshing order + */ +//============================================================================= + +SMESH::submesh_array_array* SMESH_Mesh_i::GetMeshOrder() +{ + SMESH::submesh_array_array_var aResult = new SMESH::submesh_array_array(); + + SMESHDS_Mesh* aMeshDS = _impl->GetMeshDS(); + if ( !aMeshDS ) + return aResult._retn(); + + ::SMESH_Mesh& mesh = GetImpl(); + TListOfListOfInt anOrder = mesh.GetMeshOrder(); // is there already defined order? + if ( !anOrder.size() ) { + + // collect submeshes detecting concurrent algorithms and hypothesises + TDimHypList dimHypListArr[4]; // dimHyp list for each shape dimension + + map::iterator i_sm = _mapSubMesh.begin(); + for ( ; i_sm != _mapSubMesh.end(); i_sm++ ) { + ::SMESH_subMesh* sm = (*i_sm).second; + // shape of submesh + const TopoDS_Shape& aSubMeshShape = sm->GetSubShape(); + + // list of assigned hypothesises + const list & hypList = mesh.GetHypothesisList(aSubMeshShape); + // Find out dimensions where the submesh can be concurrent. + // We define the dimensions by algo of each of hypotheses in hypList + list ::const_iterator hypIt = hypList.begin(); + for( ; hypIt != hypList.end(); hypIt++ ) { + SMESH_Algo* anAlgo = 0; + const SMESH_Hypothesis* hyp = dynamic_cast(*hypIt); + if ( hyp->GetType() != SMESHDS_Hypothesis::PARAM_ALGO ) + // hyp it-self is algo + anAlgo = (SMESH_Algo*)dynamic_cast(hyp); + else { + // try to find algorithm with help of subshapes + TopExp_Explorer anExp( aSubMeshShape, shapeTypeByDim(hyp->GetDim()) ); + for ( ; !anAlgo && anExp.More(); anExp.Next() ) + anAlgo = mesh.GetGen()->GetAlgo( mesh, anExp.Current() ); + } + if (!anAlgo) + continue; // no assigned algorithm to current submesh + + int dim = anAlgo->GetDim(); // top concurrent dimension (see comment to SMESH_DimHyp) + // the submesh can concurrent at (or lower dims if !anAlgo->NeedDescretBoundary()) + + // create instance of dimension-hypothesis for found concurrent dimension(s) and algorithm + for ( int j = anAlgo->NeedDescretBoundary() ? dim : 1, jn = dim; j <= jn; j++ ) + addDimHypInstance( j, aSubMeshShape, anAlgo, sm, hypList, dimHypListArr ); + } + } // end iterations on submesh + + // iterate on created dimension-hypotheses and check for concurrents + for ( int i = 0; i < 4; i++ ) { + const list& listOfDimHyp = dimHypListArr[i]; + // check for concurrents in own and other dimensions (step-by-step) + TDimHypList::const_iterator dhIt = listOfDimHyp.begin(); + for ( ; dhIt != listOfDimHyp.end(); dhIt++ ) { + const SMESH_DimHyp* dimHyp = *dhIt; + TListOfInt listOfConcurr; + // looking for concurrents and collect into own list + for ( int j = i; j < 4; j++ ) + findConcurrents( dimHyp, dimHypListArr[j], listOfConcurr ); + // check if any concurrents found + if ( listOfConcurr.size() > 0 ) { + // add own submesh to list of concurrent + listOfConcurr.push_front( dimHyp->_subMesh->GetId() ); + anOrder.push_back( listOfConcurr ); + } + } + } + + removeDimHyps(dimHypListArr); + + // now, minimise the number of concurrent groups + // Here we assume that lists of submhes can has same submesh + // in case of multi-dimension algorithms, as result + // list with common submesh have to be union into one list + int listIndx = 0; + TListOfListOfInt::iterator listIt = anOrder.begin(); + for(; listIt != anOrder.end(); listIt++, listIndx++ ) + unionLists( *listIt, anOrder, listIndx + 1 ); + } + // convert submesh ids into interface instances + // and dump command into python + convertMeshOrder( anOrder, aResult, true ); + + return aResult._retn(); +} + +//============================================================================= +/*! + * \brief find common submeshes with given submesh + * \param theSubMeshList list of already collected submesh to check + * \param theSubMesh given submesh to intersect with other + * \param theCommonSubMeshes collected common submeshes + */ +//============================================================================= + +static void findCommonSubMesh + (list& theSubMeshList, + const SMESH_subMesh* theSubMesh, + set& theCommon ) +{ + if ( !theSubMesh ) + return; + list::const_iterator it = theSubMeshList.begin(); + for ( ; it != theSubMeshList.end(); it++ ) + theSubMesh->FindIntersection( *it, theCommon ); + theSubMeshList.push_back( theSubMesh ); + //theCommon.insert( theSubMesh ); +} + +//============================================================================= +/*! + * \brief Set submesh object order + * \param theSubMeshArray submesh array order + */ +//============================================================================= + +::CORBA::Boolean SMESH_Mesh_i::SetMeshOrder(const SMESH::submesh_array_array& theSubMeshArray) +{ + bool res = false; + ::SMESH_Mesh& mesh = GetImpl(); + + TPythonDump aPythonDump; // prevent dump of called methods + aPythonDump << "isDone = " << _this() << ".SetMeshOrder( [ "; + + TListOfListOfInt subMeshOrder; + for ( int i = 0, n = theSubMeshArray.length(); i < n; i++ ) + { + const SMESH::submesh_array& aSMArray = theSubMeshArray[i]; + TListOfInt subMeshIds; + aPythonDump << "[ "; + // Collect subMeshes which should be clear + // do it list-by-list, because modification of submesh order + // take effect between concurrent submeshes only + set subMeshToClear; + list subMeshList; + for ( int j = 0, jn = aSMArray.length(); j < jn; j++ ) + { + const SMESH::SMESH_subMesh_var subMesh = SMESH::SMESH_subMesh::_duplicate(aSMArray[j]); + if ( j > 0 ) + aPythonDump << ", "; + aPythonDump << subMesh; + subMeshIds.push_back( subMesh->GetId() ); + // detect common parts of submeshes + if ( _mapSubMesh.find(subMesh->GetId()) != _mapSubMesh.end() ) + findCommonSubMesh( subMeshList, _mapSubMesh[ subMesh->GetId() ], subMeshToClear ); + } + aPythonDump << " ]"; + subMeshOrder.push_back( subMeshIds ); + + // clear collected submeshes + set::iterator clrIt = subMeshToClear.begin(); + for ( ; clrIt != subMeshToClear.end(); clrIt++ ) { + SMESH_subMesh* sm = (SMESH_subMesh*)*clrIt; + if ( sm ) + sm->ComputeStateEngine( SMESH_subMesh::CLEAN ); + // ClearSubMesh( *clrIt ); + } + } + aPythonDump << " ])"; + + mesh.SetMeshOrder( subMeshOrder ); + res = true; + + return res; +} + +//============================================================================= +/*! + * \brief Convert submesh ids into submesh interfaces + */ +//============================================================================= + +void SMESH_Mesh_i::convertMeshOrder +(const TListOfListOfInt& theIdsOrder, + SMESH::submesh_array_array& theResOrder, + const bool theIsDump) +{ + int nbSet = theIdsOrder.size(); + TPythonDump aPythonDump; // prevent dump of called methods + if ( theIsDump ) + aPythonDump << "[ "; + theResOrder.length(nbSet); + TListOfListOfInt::const_iterator it = theIdsOrder.begin(); + int listIndx = 0; + for( ; it != theIdsOrder.end(); it++ ) { + // translate submesh identificators into submesh objects + // takeing into account real number of concurrent lists + const TListOfInt& aSubOrder = (*it); + if (!aSubOrder.size()) + continue; + if ( theIsDump ) + aPythonDump << "[ "; + // convert shape indeces into interfaces + SMESH::submesh_array_var aResSubSet = new SMESH::submesh_array(); + aResSubSet->length(aSubOrder.size()); + TListOfInt::const_iterator subIt = aSubOrder.begin(); + for( int j = 0; subIt != aSubOrder.end(); subIt++ ) { + if ( _mapSubMeshIor.find(*subIt) == _mapSubMeshIor.end() ) + continue; + SMESH::SMESH_subMesh_var subMesh = + SMESH::SMESH_subMesh::_duplicate( _mapSubMeshIor[*subIt] ); + if ( theIsDump ) { + if ( j > 0 ) + aPythonDump << ", "; + aPythonDump << subMesh; + } + aResSubSet[ j++ ] = subMesh; + } + if ( theIsDump ) + aPythonDump << " ]"; + theResOrder[ listIndx++ ] = aResSubSet; + } + // correct number of lists + theResOrder.length( listIndx ); + + if ( theIsDump ) { + // finilise python dump + aPythonDump << " ]"; + aPythonDump << " = " << _this() << ".GetMeshOrder()"; + } +} diff --git a/src/SMESH_I/SMESH_Mesh_i.hxx b/src/SMESH_I/SMESH_Mesh_i.hxx index e8598de34..bed9819da 100644 --- a/src/SMESH_I/SMESH_Mesh_i.hxx +++ b/src/SMESH_I/SMESH_Mesh_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Mesh_i.hxx // Author : Paul RASCLE, EDF @@ -58,7 +59,7 @@ class SMESH_I_EXPORT SMESH_Mesh_i: public: SMESH_Mesh_i( PortableServer::POA_ptr thePOA, SMESH_Gen_i* myGen_i, - CORBA::Long studyId ); + CORBA::Long studyId ); virtual ~SMESH_Mesh_i(); @@ -206,6 +207,8 @@ public: */ char* GetVersionString(SMESH::MED_VERSION version, CORBA::Short nbDigits); + void ExportToMEDX( const char* file, CORBA::Boolean auto_groups, SMESH::MED_VERSION theVersion, CORBA::Boolean overwrite ) + throw (SALOME::SALOME_Exception); void ExportToMED( const char* file, CORBA::Boolean auto_groups, SMESH::MED_VERSION theVersion ) throw (SALOME::SALOME_Exception); void ExportMED( const char* file, CORBA::Boolean auto_groups ) @@ -305,6 +308,9 @@ public: SMESH::ElementType GetElementType( CORBA::Long id, bool iselem ) throw (SALOME::SALOME_Exception); + SMESH::EntityType GetElementGeomType( CORBA::Long id ) + throw (SALOME::SALOME_Exception); + /*! * Returns ID of elements for given submesh */ @@ -338,7 +344,7 @@ public: static SMESH::Hypothesis_Status ConvertHypothesisStatus (SMESH_Hypothesis::Hypothesis_Status theStatus); - static void PrepareForWriting (const char* file); + static void PrepareForWriting (const char* file, bool overwrite = true); //int importMEDFile( const char* theFileName, const char* theMeshName ); @@ -450,7 +456,16 @@ public: * Returns number of faces for given element */ CORBA::Long ElemNbFaces(CORBA::Long id); - + /*! + * Returns nodes of given face (counted from zero) for given element. + */ + SMESH::long_array* GetElemFaceNodes(CORBA::Long elemId, CORBA::Short faceIndex); + + /*! + * Returns an element based on all given nodes. + */ + CORBA::Long FindElementByNodes(const SMESH::long_array& nodes); + /*! * Returns true if given element is polygon */ @@ -500,6 +515,16 @@ public: static void CollectMeshInfo(const SMDS_ElemIteratorPtr theItr, SMESH::long_array& theInfo); + + /*! + * \brief Return submesh objects list in meshing order + */ + virtual SMESH::submesh_array_array* GetMeshOrder(); + /*! + * \brief Set submesh object order + */ + virtual ::CORBA::Boolean SetMeshOrder(const SMESH::submesh_array_array& theSubMeshArray); + std::map _mapSubMesh_i; //NRI std::map _mapSubMesh; //NRI @@ -510,6 +535,13 @@ private: */ void checkGroupNames(); + /*! + * Convert submesh ids into submesh interfaces + */ + void convertMeshOrder(const TListOfListOfInt& theIdsOrder, + SMESH::submesh_array_array& theSubMeshOrder, + const bool theIsDump); + private: static int myIdGenerator; diff --git a/src/SMESH_I/SMESH_NoteBook.cxx b/src/SMESH_I/SMESH_NoteBook.cxx index 2345a4279..df42dd4f9 100644 --- a/src/SMESH_I/SMESH_NoteBook.cxx +++ b/src/SMESH_I/SMESH_NoteBook.cxx @@ -1,25 +1,25 @@ -// Copyright (C) 2008 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // -// This library is free software; you can redistribute it and/or -// modify it under the terms of the GNU Lesser General Public -// License as published by the Free Software Foundation; either -// version 2.1 of the License. +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. // -// This library is distributed in the hope that it will be useful -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -// Lesser General Public License for more details. +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. // -// You should have received a copy of the GNU Lesser General Public -// License along with this library; if not, write to the Free Software -// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // -// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : SMESH_NoteBook.cxx // Author : Roman NIKOLAEV - +// #include "SMESH_2smeshpy.hxx" #include "SMESH_NoteBook.hxx" #include "SMESH_Gen_i.hxx" @@ -41,14 +41,14 @@ static int MYDEBUG = 0; using namespace std; -void SetVariable(Handle(_pyCommand) theCommand,const ObjectStates* theStates, int position, int theArgNb); +void SetVariable(Handle(_pyCommand) theCommand,const SMESH_ObjectStates* theStates, int position, int theArgNb); //================================================================================ /*! * \brief Constructor */ //================================================================================ -ObjectStates::ObjectStates(TCollection_AsciiString theType) +SMESH_ObjectStates::SMESH_ObjectStates(TCollection_AsciiString theType) { _type = theType; _dumpstate = 0; @@ -59,7 +59,7 @@ ObjectStates::ObjectStates(TCollection_AsciiString theType) * \brief Destructor */ //================================================================================ -ObjectStates::~ObjectStates() +SMESH_ObjectStates::~SMESH_ObjectStates() { } @@ -69,7 +69,7 @@ ObjectStates::~ObjectStates() * \param theState - Object state (vector of notebook variable) */ //================================================================================ -void ObjectStates::AddState(const TState &theState) +void SMESH_ObjectStates::AddState(const TState &theState) { _states.push_back(theState); } @@ -80,7 +80,7 @@ void ObjectStates::AddState(const TState &theState) * \\retval state - Object state (vector of notebook variable) */ //================================================================================ -TState ObjectStates::GetCurrectState() const +TState SMESH_ObjectStates::GetCurrectState() const { if(_states.size() > _dumpstate) return _states[_dumpstate]; @@ -94,7 +94,7 @@ TState ObjectStates::GetCurrectState() const * */ //================================================================================ -TAllStates ObjectStates::GetAllStates() const +TAllStates SMESH_ObjectStates::GetAllStates() const { return _states; } @@ -104,7 +104,7 @@ TAllStates ObjectStates::GetAllStates() const * */ //================================================================================ -void ObjectStates::IncrementState() +void SMESH_ObjectStates::IncrementState() { _dumpstate++; } @@ -114,7 +114,7 @@ void ObjectStates::IncrementState() * */ //================================================================================ -TCollection_AsciiString ObjectStates::GetObjectType() const{ +TCollection_AsciiString SMESH_ObjectStates::GetObjectType() const{ return _type; } @@ -125,7 +125,7 @@ TCollection_AsciiString ObjectStates::GetObjectType() const{ */ //================================================================================ LayerDistributionStates::LayerDistributionStates(): - ObjectStates("LayerDistribution") + SMESH_ObjectStates("LayerDistribution") { } //================================================================================ @@ -252,7 +252,7 @@ void SMESH_NoteBook::ReplaceVariables() if(it != _objectMap.end()) { if(MYDEBUG) cout << "Found object : " << (*it).first << endl; - ObjectStates *aStates = (*it).second; + SMESH_ObjectStates *aStates = (*it).second; // Case for LocalLength hypothesis if(aStates->GetObjectType().IsEqual("LocalLength") && aStates->GetCurrectState().size() >= 2) { if(aMethod.IsEqual("SetLength")) { @@ -674,12 +674,12 @@ void SMESH_NoteBook::InitObjectMap() } if(MYDEBUG) cout<<"The object Type : "<length(); i++) { TState aVars; @@ -697,7 +697,7 @@ void SMESH_NoteBook::InitObjectMap() } aState->AddState(aVars); } - _objectMap.insert(pair(TCollection_AsciiString(aSObject->GetID()),aState)); + _objectMap.insert(pair(TCollection_AsciiString(aSObject->GetID()),aState)); } } } @@ -850,10 +850,10 @@ bool SMESH_NoteBook::GetReal(const TCollection_AsciiString& theVarName, double& /*! - * Set variable of the ObjectStates from position to the _pyCommand + * Set variable of the SMESH_ObjectStates from position to the _pyCommand * method as nbArg argument */ -void SetVariable(Handle(_pyCommand) theCommand, const ObjectStates* theStates, int position, int theArgNb) +void SetVariable(Handle(_pyCommand) theCommand, const SMESH_ObjectStates* theStates, int position, int theArgNb) { if(theStates->GetCurrectState().size() > position) if(!theStates->GetCurrectState().at(position).IsEmpty()) diff --git a/src/SMESH_I/SMESH_NoteBook.hxx b/src/SMESH_I/SMESH_NoteBook.hxx index dfeb3b50a..94e348ecd 100644 --- a/src/SMESH_I/SMESH_NoteBook.hxx +++ b/src/SMESH_I/SMESH_NoteBook.hxx @@ -1,26 +1,25 @@ -// Copyright (C) 2008 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // -// This library is free software; you can redistribute it and/or -// modify it under the terms of the GNU Lesser General Public -// License as published by the Free Software Foundation; either -// version 2.1 of the License. +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. // -// This library is distributed in the hope that it will be useful -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -// Lesser General Public License for more details. +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. // -// You should have received a copy of the GNU Lesser General Public -// License along with this library; if not, write to the Free Software -// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // -// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : SMESH_NoteBook.hxx // Author : Roman NIKOLAEV () - - +// #ifndef SMESH_NoteBook_HeaderFile #define SMESH_NoteBook_HeaderFile @@ -36,12 +35,12 @@ typedef std::vector TState; typedef std::vector TAllStates; typedef TCollection_AsciiString _pyID; -class ObjectStates{ +class SMESH_ObjectStates{ public: - ObjectStates(TCollection_AsciiString theType); - virtual ~ObjectStates(); + SMESH_ObjectStates(TCollection_AsciiString theType); + virtual ~SMESH_ObjectStates(); void AddState(const TState &theState); @@ -58,7 +57,7 @@ private: int _dumpstate; }; -class LayerDistributionStates : public ObjectStates +class LayerDistributionStates : public SMESH_ObjectStates { public: typedef std::map TDistributionMap; @@ -81,7 +80,7 @@ private: class SMESH_NoteBook { public: - typedef std::map TVariablesMap; + typedef std::map TVariablesMap; typedef std::map TMeshEditorMap; SMESH_NoteBook(); ~SMESH_NoteBook(); diff --git a/src/SMESH_I/SMESH_Pattern_i.cxx b/src/SMESH_I/SMESH_Pattern_i.cxx index f3f1fcfbc..3d725b8fb 100644 --- a/src/SMESH_I/SMESH_Pattern_i.cxx +++ b/src/SMESH_I/SMESH_Pattern_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Pattern_i.cxx // Created : Fri Aug 20 16:15:49 2004 diff --git a/src/SMESH_I/SMESH_Pattern_i.hxx b/src/SMESH_I/SMESH_Pattern_i.hxx index 8526ef9ad..5d5003ab8 100644 --- a/src/SMESH_I/SMESH_Pattern_i.hxx +++ b/src/SMESH_I/SMESH_Pattern_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_Pattern_i.hxx // Created : Fri Aug 20 16:03:15 2004 diff --git a/src/SMESH_I/SMESH_PythonDump.hxx b/src/SMESH_I/SMESH_PythonDump.hxx index 10d6dd85c..afcd15ddb 100644 --- a/src/SMESH_I/SMESH_PythonDump.hxx +++ b/src/SMESH_I/SMESH_PythonDump.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + #ifndef _SMESH_PYTHONDUMP_HXX_ #define _SMESH_PYTHONDUMP_HXX_ @@ -117,6 +118,12 @@ namespace SMESH TPythonDump& operator<<(const SMESH::double_array& theArg); + TPythonDump& + operator<<(SMESH::SMESH_Hypothesis_ptr theArg); + + TPythonDump& + operator<<(SMESH::SMESH_IDSource_ptr theArg); + TPythonDump& operator<<(SALOMEDS::SObject_ptr theArg); diff --git a/src/SMESH_I/SMESH_subMesh_i.cxx b/src/SMESH_I/SMESH_subMesh_i.cxx index 2720de2c7..301f1a972 100644 --- a/src/SMESH_I/SMESH_subMesh_i.cxx +++ b/src/SMESH_I/SMESH_subMesh_i.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_subMesh_i.cxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/SMESH_subMesh_i.hxx b/src/SMESH_I/SMESH_subMesh_i.hxx index 5a6eb8bd8..bd53171ae 100644 --- a/src/SMESH_I/SMESH_subMesh_i.hxx +++ b/src/SMESH_I/SMESH_subMesh_i.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses // File : SMESH_subMesh_i.hxx // Author : Paul RASCLE, EDF diff --git a/src/SMESH_I/smeshpy.py b/src/SMESH_I/smeshpy.py index 5b820f22f..48a483688 100644 --- a/src/SMESH_I/smeshpy.py +++ b/src/SMESH_I/smeshpy.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses # File : smeshpy.py # Module : SMESH diff --git a/src/SMESH_SWIG/Makefile.am b/src/SMESH_SWIG/Makefile.am index 7b6ef9fe4..5a616b918 100644 --- a/src/SMESH_SWIG/Makefile.am +++ b/src/SMESH_SWIG/Makefile.am @@ -1,7 +1,4 @@ -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -# -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : Makefile.in # Author : Nicolas REJNERI, Paul RASCLE # Modified by : Alexander BORODIN (OCN) - autotools usage diff --git a/src/SMESH_SWIG/PAL_MESH_041_mesh.py b/src/SMESH_SWIG/PAL_MESH_041_mesh.py index 523429d2b..db62e40ce 100755 --- a/src/SMESH_SWIG/PAL_MESH_041_mesh.py +++ b/src/SMESH_SWIG/PAL_MESH_041_mesh.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + import salome import geompy import smesh @@ -54,7 +55,7 @@ Id_face1 = geompy.addToStudy(face1,"Face1") #-----------------------------SMESH------------------------------------------- - +smesh.SetCurrentStudy(salome.myStudy) # -- Init mesh -- plane_mesh = salome.IDToObject( Id_face1) diff --git a/src/SMESH_SWIG/PAL_MESH_043_2D.py b/src/SMESH_SWIG/PAL_MESH_043_2D.py index 35bd54cda..bdf8ba02e 100755 --- a/src/SMESH_SWIG/PAL_MESH_043_2D.py +++ b/src/SMESH_SWIG/PAL_MESH_043_2D.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_testExtrusion2D.py # Module : SMESH # Description : Create meshes to test extrusion of mesh elements along path @@ -52,6 +53,7 @@ id_ellipse2 = geompy.addToStudy(ellipse2, "Ellips 2") #---------------------------------SMESH +smesh.SetCurrentStudy(salome.myStudy) # create the path mesh mesh1 = smesh.Mesh(ellipse1, "Path Mesh") diff --git a/src/SMESH_SWIG/PAL_MESH_043_3D.py b/src/SMESH_SWIG/PAL_MESH_043_3D.py index bc4e115f0..156a86dc9 100755 --- a/src/SMESH_SWIG/PAL_MESH_043_3D.py +++ b/src/SMESH_SWIG/PAL_MESH_043_3D.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_testExtrusion3D.py # Module : SMESH # Description : Create meshes to test extrusion of mesh elements along path @@ -50,6 +51,7 @@ idcircle = geompy.addToStudy(circle, "Circle") idface = geompy.addToStudy(face, "Circular face") +smesh.SetCurrentStudy(salome.myStudy) # init a Mesh with the circular face mesh1 = smesh.Mesh(face, "Mesh on circular face") diff --git a/src/SMESH_SWIG/SMESH_AdvancedEditor.py b/src/SMESH_SWIG/SMESH_AdvancedEditor.py index a480d029f..2e5ae0bfc 100644 --- a/src/SMESH_SWIG/SMESH_AdvancedEditor.py +++ b/src/SMESH_SWIG/SMESH_AdvancedEditor.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,8 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + +import salome import smesh import math @@ -51,7 +53,8 @@ def GetNewNodes(mesh,Elems,OldNodes): pass return newnodes - +smesh.SetCurrentStudy(salome.myStudy) + # create empty mesh mesh = smesh.Mesh() diff --git a/src/SMESH_SWIG/SMESH_BelongToGeom.py b/src/SMESH_SWIG/SMESH_BelongToGeom.py index 0ba648118..02047a1cf 100644 --- a/src/SMESH_SWIG/SMESH_BelongToGeom.py +++ b/src/SMESH_SWIG/SMESH_BelongToGeom.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + from SMESH_test1 import * ## Old style diff --git a/src/SMESH_SWIG/SMESH_BuildCompound.py b/src/SMESH_SWIG/SMESH_BuildCompound.py index e82abfa40..2ed6eb0e8 100644 --- a/src/SMESH_SWIG/SMESH_BuildCompound.py +++ b/src/SMESH_SWIG/SMESH_BuildCompound.py @@ -1,8 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -# -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -20,6 +17,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_BuildCompound.py # Author : Alexander KOVALEV # Module : SMESH @@ -29,6 +27,7 @@ # ! as some sequences of symbols from this example are used during # ! documentation generation to identify certain places of this file # +import salome import geompy import smesh @@ -61,6 +60,8 @@ geompy.addToStudy(Box_sup, "Box_sup") geompy.addToStudyInFather(Box_sup, Fsup2, "Fsup") geompy.addToStudyInFather(Box_sup, Finf2, "Finf") +smesh.SetCurrentStudy(salome.myStudy) + ## create a bottom mesh Mesh_inf = smesh.Mesh(Box_inf, "Mesh_inf") algo1D_1=Mesh_inf.Segment() diff --git a/src/SMESH_SWIG/SMESH_GroupFromGeom.py b/src/SMESH_SWIG/SMESH_GroupFromGeom.py index e4763c0b0..a91a7c29e 100644 --- a/src/SMESH_SWIG/SMESH_GroupFromGeom.py +++ b/src/SMESH_SWIG/SMESH_GroupFromGeom.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_GroupFromGeom.py # Module : SMESH # diff --git a/src/SMESH_SWIG/SMESH_GroupFromGeom2.py b/src/SMESH_SWIG/SMESH_GroupFromGeom2.py index 85dbd4056..d7643bfdf 100755 --- a/src/SMESH_SWIG/SMESH_GroupFromGeom2.py +++ b/src/SMESH_SWIG/SMESH_GroupFromGeom2.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + #============================================================================== # Info. # Bug (from script, bug) : SMESH_GroupFromGeom.py, PAL6945 diff --git a/src/SMESH_SWIG/SMESH_GroupLyingOnGeom.py b/src/SMESH_SWIG/SMESH_GroupLyingOnGeom.py index 816dede85..e0cbb6404 100644 --- a/src/SMESH_SWIG/SMESH_GroupLyingOnGeom.py +++ b/src/SMESH_SWIG/SMESH_GroupLyingOnGeom.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,8 +20,12 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + +import salome import smesh +smesh.SetCurrentStudy(salome.myStudy) + def BuildGroupLyingOn(theMesh, theElemType, theName, theShape): aFilterMgr = smesh.smesh.CreateFilterManager() aFilter = aFilterMgr.CreateFilter() diff --git a/src/SMESH_SWIG/SMESH_Nut.py b/src/SMESH_SWIG/SMESH_Nut.py index 11428f8c5..801e554f1 100755 --- a/src/SMESH_SWIG/SMESH_Nut.py +++ b/src/SMESH_SWIG/SMESH_Nut.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + ##################################################################### #Created :17/02/2005 #Auhtor :MASLOV Eugeny, KOVALTCHUK Alexey @@ -97,6 +98,8 @@ Cut_1_ID = geompy.addToStudy(Cut_1, "Cut_1") #Mesh creation +smesh.SetCurrentStudy(salome.myStudy) + # -- Init -- shape_mesh = salome.IDToObject( Cut_1_ID ) diff --git a/src/SMESH_SWIG/SMESH_Partition1_tetra.py b/src/SMESH_SWIG/SMESH_Partition1_tetra.py index e3af5d2d1..1fef52a73 100644 --- a/src/SMESH_SWIG/SMESH_Partition1_tetra.py +++ b/src/SMESH_SWIG/SMESH_Partition1_tetra.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # Tetrahedrization of the geometry generated by the Python script GEOM_Partition1.py # Hypothesis and algorithms for the mesh generation are global # -- Rayon de la bariere @@ -119,6 +120,7 @@ status = geompy.CheckShape(alveole) print " check status ", status # ---- launch SMESH +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh with the alveole shape_mesh = salome.IDToObject( idalveole ) diff --git a/src/SMESH_SWIG/SMESH_Sphere.py b/src/SMESH_SWIG/SMESH_Sphere.py index 3b1ca2e79..63d746418 100644 --- a/src/SMESH_SWIG/SMESH_Sphere.py +++ b/src/SMESH_SWIG/SMESH_Sphere.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # GEOM GEOM_SWIG : binding of C++ omplementaion with Python # File : GEOM_Sphere.py # Author : Damien COQUERET, Open CASCADE @@ -103,6 +104,7 @@ Id_Result = addToStudy(Result, "Result") #----------------------------------------------------------------------- #Meshing +smesh.SetCurrentStudy(salome.myStudy) my_hexa = smesh.Mesh(Result, "Sphere_Mesh") algo = my_hexa.Segment() algo.NumberOfSegments(NbSeg) diff --git a/src/SMESH_SWIG/SMESH_blocks.py b/src/SMESH_SWIG/SMESH_blocks.py index d3e744d5f..ddbc7d5e7 100644 --- a/src/SMESH_SWIG/SMESH_blocks.py +++ b/src/SMESH_SWIG/SMESH_blocks.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # SMESH SMESH_SWIG : binding of C++ implementaion with Python # File : SMESH_blocks.py # Author : Julia DOROVSKIKH @@ -36,6 +37,7 @@ import GEOM_Spanner isBlocksTest = 0 # False isMeshTest = 1 # True +smesh.SetCurrentStudy(salome.myStudy) GEOM_Spanner.MakeSpanner(geompy, math, isBlocksTest, isMeshTest, smesh) diff --git a/src/SMESH_SWIG/SMESH_box.py b/src/SMESH_SWIG/SMESH_box.py index 8a1b39cac..c8df0179d 100755 --- a/src/SMESH_SWIG/SMESH_box.py +++ b/src/SMESH_SWIG/SMESH_box.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + #============================================================================== # Info. # Bug (from script, bug) : box.py, PAL5223 @@ -47,6 +48,7 @@ box = geompy.MakeBox(0.,0.,0.,1.,1.,1.) boxId = geompy.addToStudy(box,"box") # ---- SMESH +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh diff --git a/src/SMESH_SWIG/SMESH_box2_tetra.py b/src/SMESH_SWIG/SMESH_box2_tetra.py index 79cf3b536..365d64d94 100644 --- a/src/SMESH_SWIG/SMESH_box2_tetra.py +++ b/src/SMESH_SWIG/SMESH_box2_tetra.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # Tetrahedrization of the geometry union of 2 boxes having a face in common # Hypothesis and algorithms for the mesh generation are global # @@ -73,6 +74,7 @@ print "number of Edges in shell : ", len(subEdgeList) ### ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh with the shell diff --git a/src/SMESH_SWIG/SMESH_box3_tetra.py b/src/SMESH_SWIG/SMESH_box3_tetra.py index fd1b3ef62..19eb230da 100644 --- a/src/SMESH_SWIG/SMESH_box3_tetra.py +++ b/src/SMESH_SWIG/SMESH_box3_tetra.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # Tetrahedrization of the geometry union of 3 boxes aligned where the middle # one has a race in common with the two others. # Hypothesis and algorithms for the mesh generation are global @@ -84,7 +85,7 @@ print "number of Edges in shell : ", len(subEdgeList) ### ---------------------------- SMESH -------------------------------------- - +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh with the shell diff --git a/src/SMESH_SWIG/SMESH_box_tetra.py b/src/SMESH_SWIG/SMESH_box_tetra.py index 279ae11ab..42bc55336 100644 --- a/src/SMESH_SWIG/SMESH_box_tetra.py +++ b/src/SMESH_SWIG/SMESH_box_tetra.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # Tetrahedrization of a simple box. Hypothesis and algorithms for # the mesh generation are global # @@ -45,6 +46,7 @@ print "number of Edges in box : ", len(subEdgeList) ### ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh with the boxe diff --git a/src/SMESH_SWIG/SMESH_controls.py b/src/SMESH_SWIG/SMESH_controls.py index 41e561329..43c1b5874 100644 --- a/src/SMESH_SWIG/SMESH_controls.py +++ b/src/SMESH_SWIG/SMESH_controls.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_control.py # Author : Sergey LITONIN # Module : SMESH diff --git a/src/SMESH_SWIG/SMESH_demo_hexa2_upd.py b/src/SMESH_SWIG/SMESH_demo_hexa2_upd.py index f5f6d65e5..232f4efa9 100755 --- a/src/SMESH_SWIG/SMESH_demo_hexa2_upd.py +++ b/src/SMESH_SWIG/SMESH_demo_hexa2_upd.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + #============================================================================== # Info. # Bug (from script, bug) : SMESH_demo_hexa2_upd.py, PAL6781 @@ -124,6 +125,7 @@ for i in range(8): idEdgeZ.append(geompy.addToStudyInFather(vol,edgeZ[i],"EdgeZ"+str(i+1))) ### ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh with the volume diff --git a/src/SMESH_SWIG/SMESH_fixation.py b/src/SMESH_SWIG/SMESH_fixation.py index bb406f035..ee6ae836a 100644 --- a/src/SMESH_SWIG/SMESH_fixation.py +++ b/src/SMESH_SWIG/SMESH_fixation.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_fix_volute.py # Author : Paul RASCLE, EDF # Module : SMESH diff --git a/src/SMESH_SWIG/SMESH_fixation_hexa.py b/src/SMESH_SWIG/SMESH_fixation_hexa.py index 6a73b38b8..e67021c5d 100644 --- a/src/SMESH_SWIG/SMESH_fixation_hexa.py +++ b/src/SMESH_SWIG/SMESH_fixation_hexa.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # Hexahedrization of the geometry generated by the Python script # SMESH_fixation.py # Hypothesis and algorithms for the mesh generation are global @@ -45,6 +46,7 @@ status = geompy.CheckShape(compshell) print " check status ", status ### ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh with the compshell shape_mesh = salome.IDToObject( idcomp ) diff --git a/src/SMESH_SWIG/SMESH_fixation_netgen.py b/src/SMESH_SWIG/SMESH_fixation_netgen.py index 16295a5e5..789c90ebc 100644 --- a/src/SMESH_SWIG/SMESH_fixation_netgen.py +++ b/src/SMESH_SWIG/SMESH_fixation_netgen.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # Tetrahedrization of the geometry generated by the Python script # SMESH_fixation.py # The new Netgen algorithm is used that discretizes baoundaries itself @@ -45,6 +46,7 @@ status = geompy.CheckShape(compshell) print " check status ", status ### ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) print "-------------------------- create Mesh, algorithm, hypothesis" diff --git a/src/SMESH_SWIG/SMESH_fixation_tetra.py b/src/SMESH_SWIG/SMESH_fixation_tetra.py index 483cd666d..fa63ce0cb 100644 --- a/src/SMESH_SWIG/SMESH_fixation_tetra.py +++ b/src/SMESH_SWIG/SMESH_fixation_tetra.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # Tetrahedrization of the geometry generated by the Python script # SMESH_fixation.py # Hypothesis and algorithms for the mesh generation are global @@ -45,6 +46,7 @@ status = geompy.CheckShape(compshell) print " check status ", status ### ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh with the compshell diff --git a/src/SMESH_SWIG/SMESH_flight_skin.py b/src/SMESH_SWIG/SMESH_flight_skin.py index 534bed16c..7ab3583b5 100644 --- a/src/SMESH_SWIG/SMESH_flight_skin.py +++ b/src/SMESH_SWIG/SMESH_flight_skin.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # Triangulation of the skin of the geometry from a Brep representing a plane # Hypothesis and algorithms for the mesh generation are global # @@ -55,6 +56,7 @@ print "number of Edges in flight : ", len(subEdgeList) ### ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh with the shell shape_mesh = salome.IDToObject( idShape ) diff --git a/src/SMESH_SWIG/SMESH_freebord.py b/src/SMESH_SWIG/SMESH_freebord.py index 4c5fc646d..cc864aab8 100644 --- a/src/SMESH_SWIG/SMESH_freebord.py +++ b/src/SMESH_SWIG/SMESH_freebord.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + import salome import geompy import smesh @@ -41,6 +42,7 @@ idbox = geompy.addToStudy( aBox, "box" ) aBox = salome.IDToObject( idbox ) # Create mesh +smesh.SetCurrentStudy(salome.myStudy) mesh = smesh.Mesh(aBox, "Mesh_freebord") diff --git a/src/SMESH_SWIG/SMESH_hexaedre.py b/src/SMESH_SWIG/SMESH_hexaedre.py index 4345b08b8..6c1abaa26 100755 --- a/src/SMESH_SWIG/SMESH_hexaedre.py +++ b/src/SMESH_SWIG/SMESH_hexaedre.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + #============================================================================== # Info. # Bug (from script, bug) : hexaedre_modified.py, PAL6194, PAL7153 @@ -95,6 +96,7 @@ salome.sg.updateObjBrowser(1) # ----------------------------------------------------------------------------- print "-------------------------- mesh" +smesh.SetCurrentStudy(salome.myStudy) # ---- init a Mesh with the geom shape shape_mesh = blob diff --git a/src/SMESH_SWIG/SMESH_mechanic.py b/src/SMESH_SWIG/SMESH_mechanic.py index 46032383c..6b84327cc 100644 --- a/src/SMESH_SWIG/SMESH_mechanic.py +++ b/src/SMESH_SWIG/SMESH_mechanic.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_withHole.py # Author : Lucien PIGNOLONI # Module : SMESH @@ -120,6 +121,7 @@ name = geompy.SubShapeName( sub_face4, mechanic ) Id_SubFace4 = geompy.addToStudyInFather( mechanic, sub_face4, name ) # ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) # -- Init -- shape_mesh = salome.IDToObject( Id_mechanic ) diff --git a/src/SMESH_SWIG/SMESH_mechanic_editor.py b/src/SMESH_SWIG/SMESH_mechanic_editor.py index 9ff002704..94c0719ff 100644 --- a/src/SMESH_SWIG/SMESH_mechanic_editor.py +++ b/src/SMESH_SWIG/SMESH_mechanic_editor.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_withHole.py # Author : Lucien PIGNOLONI # Module : SMESH @@ -118,6 +119,7 @@ name = geompy.SubShapeName( sub_face4, mechanic ) Id_SubFace4 = geompy.addToStudyInFather( mechanic, sub_face4, name ) # ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) # -- Init -- shape_mesh = salome.IDToObject( Id_mechanic ) diff --git a/src/SMESH_SWIG/SMESH_mechanic_netgen.py b/src/SMESH_SWIG/SMESH_mechanic_netgen.py index 038e64e0b..21f787040 100644 --- a/src/SMESH_SWIG/SMESH_mechanic_netgen.py +++ b/src/SMESH_SWIG/SMESH_mechanic_netgen.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # Quadrangulation of the geometry generated by the Python script # SMESH_mechanic.py # The new Netgen algorithm is used that discretizes baoundaries itself @@ -104,6 +105,7 @@ print "number of Faces in mechanic : ",len(subFaceList) print "number of Edges in mechanic : ",len(subEdgeList) ### ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) print "-------------------------- create Mesh, algorithm, hypothesis" diff --git a/src/SMESH_SWIG/SMESH_mechanic_tetra.py b/src/SMESH_SWIG/SMESH_mechanic_tetra.py index 1307067df..c72428bff 100644 --- a/src/SMESH_SWIG/SMESH_mechanic_tetra.py +++ b/src/SMESH_SWIG/SMESH_mechanic_tetra.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_withHole.py # Author : Lucien PIGNOLONI # Module : SMESH @@ -104,6 +105,7 @@ print "number of Faces in mechanic : ",len(subFaceList) print "number of Edges in mechanic : ",len(subEdgeList) ### ---------------------------- SMESH -------------------------------------- +smesh.SetCurrentStudy(salome.myStudy) shape_mesh = salome.IDToObject( Id_mechanic ) diff --git a/src/SMESH_SWIG/SMESH_reg.py b/src/SMESH_SWIG/SMESH_reg.py index 92005898d..06dd5706c 100644 --- a/src/SMESH_SWIG/SMESH_reg.py +++ b/src/SMESH_SWIG/SMESH_reg.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_reg.py # Module : SMESH # @@ -58,7 +59,7 @@ salome.sg.updateObjBrowser(1); # ---- launch SMESH smeshgui = salome.ImportComponentGUI("SMESH") smeshgui.Init(salome.myStudyId) - +smesh.SetCurrentStudy(salome.myStudy) # ---- Creating meshes diff --git a/src/SMESH_SWIG/SMESH_shared_modules.py b/src/SMESH_SWIG/SMESH_shared_modules.py index 594832b32..9db144125 100644 --- a/src/SMESH_SWIG/SMESH_shared_modules.py +++ b/src/SMESH_SWIG/SMESH_shared_modules.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + """ """ diff --git a/src/SMESH_SWIG/SMESH_test.py b/src/SMESH_SWIG/SMESH_test.py index da4eda843..a80121aa4 100644 --- a/src/SMESH_SWIG/SMESH_test.py +++ b/src/SMESH_SWIG/SMESH_test.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses # File : SMESH_test.py # Module : SMESH @@ -56,6 +57,7 @@ ide = geompy.addToStudyInFather(face, edge, name) # ---- SMESH +smesh.SetCurrentStudy(salome.myStudy) box = salome.IDToObject(idb) mesh = smesh.Mesh(box, "Meshbox") @@ -124,11 +126,17 @@ for a in log: elif comType == 2: for i in range(a.number): ind = a.indexes[ii] + print ind ii = ii+1 + print ii i1 = a.indexes[ii] ii = ii+1 i2 = a.indexes[ii] + print i2 ii = ii+1 + print "ii", ii i3 = a.indexes[ii] + print i3 + #ii = ii+1 ii = ii+1 print "AddTriangle %i - %i %i %i" % (ind, i1, i2, i3) diff --git a/src/SMESH_SWIG/SMESH_test0.py b/src/SMESH_SWIG/SMESH_test0.py index 407d25ead..3a0f73c23 100644 --- a/src/SMESH_SWIG/SMESH_test0.py +++ b/src/SMESH_SWIG/SMESH_test0.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_test0.py # Module : SMESH # diff --git a/src/SMESH_SWIG/SMESH_test1.py b/src/SMESH_SWIG/SMESH_test1.py index cd68018d2..e5f964768 100644 --- a/src/SMESH_SWIG/SMESH_test1.py +++ b/src/SMESH_SWIG/SMESH_test1.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_test1.py # Module : SMESH # @@ -27,7 +28,6 @@ import salome import geompy import smesh - # ---- define a box box = geompy.MakeBox(0., 0., 0., 100., 200., 300.) @@ -60,6 +60,8 @@ idedge = geompy.addToStudyInFather(face, edge, name) # ---- SMESH +smesh.SetCurrentStudy(salome.myStudy) + # ---- Init a Mesh with the box mesh = smesh.Mesh(box, "Meshbox") diff --git a/src/SMESH_SWIG/SMESH_test1_AndDisplay.py b/src/SMESH_SWIG/SMESH_test1_AndDisplay.py index c87694894..cedeabc92 100644 --- a/src/SMESH_SWIG/SMESH_test1_AndDisplay.py +++ b/src/SMESH_SWIG/SMESH_test1_AndDisplay.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_test1.py # Module : SMESH # @@ -60,6 +61,8 @@ idedge = geompy.addToStudyInFather(face, edge, name) # ---- SMESH +smesh.SetCurrentStudy(salome.myStudy) + # ---- Init a Mesh with the box mesh = smesh.Mesh(box, "Meshbox") diff --git a/src/SMESH_SWIG/SMESH_test2.py b/src/SMESH_SWIG/SMESH_test2.py index 01c912973..cc3d1a2e8 100644 --- a/src/SMESH_SWIG/SMESH_test2.py +++ b/src/SMESH_SWIG/SMESH_test2.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_test2.py # Module : SMESH # diff --git a/src/SMESH_SWIG/SMESH_test3.py b/src/SMESH_SWIG/SMESH_test3.py index a2c771b80..1a02159ed 100644 --- a/src/SMESH_SWIG/SMESH_test3.py +++ b/src/SMESH_SWIG/SMESH_test3.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_test3.py # Module : SMESH #import salome diff --git a/src/SMESH_SWIG/SMESH_test4.py b/src/SMESH_SWIG/SMESH_test4.py index 181833934..f5357c5e7 100755 --- a/src/SMESH_SWIG/SMESH_test4.py +++ b/src/SMESH_SWIG/SMESH_test4.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + import salome import geompy import smesh @@ -40,6 +41,7 @@ face = salome.IDToObject(idface) # ---- SMESH +smesh.SetCurrentStudy(salome.myStudy) mesh = smesh.Mesh(box, "Meshbox") # Set 1D algorithm/hypotheses to mesh diff --git a/src/SMESH_SWIG/SMESH_test5.py b/src/SMESH_SWIG/SMESH_test5.py index 616f0e39d..844c91511 100644 --- a/src/SMESH_SWIG/SMESH_test5.py +++ b/src/SMESH_SWIG/SMESH_test5.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : SMESH_test5.py # Module : SMESH # @@ -30,6 +31,8 @@ import CORBA import os import os.path +smesh.SetCurrentStudy(salome.myStudy) + def SetSObjName(theSObj,theName) : ok, anAttr = theSObj.FindAttribute("AttributeName") if ok: diff --git a/src/SMESH_SWIG/batchmode_mefisto.py b/src/SMESH_SWIG/batchmode_mefisto.py index 0e768a4d1..a4bc7ecf5 100644 --- a/src/SMESH_SWIG/batchmode_mefisto.py +++ b/src/SMESH_SWIG/batchmode_mefisto.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + import os import re diff --git a/src/SMESH_SWIG/batchmode_smesh.py b/src/SMESH_SWIG/batchmode_smesh.py index eb2c4e1fe..2b3e64bc4 100644 --- a/src/SMESH_SWIG/batchmode_smesh.py +++ b/src/SMESH_SWIG/batchmode_smesh.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : batchmode_smesh.py # Author : Oksana TCHEBANOVA # Module : SMESH @@ -33,6 +34,7 @@ import SMESH modulecatalog = naming_service.Resolve("/Kernel/ModulCatalog") smesh = lcc.FindOrLoadComponent("FactoryServer", "SMESH") +smesh.SetCurrentStudy(myStudy) myStudyBuilder = myStudy.NewBuilder() if myStudyBuilder is None: diff --git a/src/SMESH_SWIG/ex00_all.py b/src/SMESH_SWIG/ex00_all.py index 0ef515b9c..0977fa202 100644 --- a/src/SMESH_SWIG/ex00_all.py +++ b/src/SMESH_SWIG/ex00_all.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ================================== # Load all examples # ----------------- diff --git a/src/SMESH_SWIG/ex01_cube2build.py b/src/SMESH_SWIG/ex01_cube2build.py index 34bb6e39d..888a70642 100644 --- a/src/SMESH_SWIG/ex01_cube2build.py +++ b/src/SMESH_SWIG/ex01_cube2build.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -287,6 +288,8 @@ piece_id = addToStudy(piece, "ex01_cube2build") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create hexahedrical mesh on piece # --------------------------------- diff --git a/src/SMESH_SWIG/ex02_cube2primitive.py b/src/SMESH_SWIG/ex02_cube2primitive.py index 885d8722a..3890e97d4 100644 --- a/src/SMESH_SWIG/ex02_cube2primitive.py +++ b/src/SMESH_SWIG/ex02_cube2primitive.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -98,6 +99,8 @@ piece_id = addToStudy(piece, "ex02_cube2primitive") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create hexahedrical mesh on piece # --------------------------------- diff --git a/src/SMESH_SWIG/ex03_cube2partition.py b/src/SMESH_SWIG/ex03_cube2partition.py index d620a6411..6ca0bd7a3 100644 --- a/src/SMESH_SWIG/ex03_cube2partition.py +++ b/src/SMESH_SWIG/ex03_cube2partition.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -85,6 +86,8 @@ piece_id = addToStudy(piece, "ex03_cube2partition") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create hexahedrical mesh on piece # --------------------------------- diff --git a/src/SMESH_SWIG/ex04_cube5tetraHexa.py b/src/SMESH_SWIG/ex04_cube5tetraHexa.py index 02f6f2c87..ae3ca45f5 100644 --- a/src/SMESH_SWIG/ex04_cube5tetraHexa.py +++ b/src/SMESH_SWIG/ex04_cube5tetraHexa.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -66,6 +67,8 @@ piece_id = addToStudy(piece, "ex04_cube5tetraHexa") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex05_hole1build.py b/src/SMESH_SWIG/ex05_hole1build.py index 31793da2e..4b3c77581 100644 --- a/src/SMESH_SWIG/ex05_hole1build.py +++ b/src/SMESH_SWIG/ex05_hole1build.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -124,6 +125,8 @@ piece_id = addToStudy(piece, "ex05_hole1build") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex06_hole1boolean.py b/src/SMESH_SWIG/ex06_hole1boolean.py index acdc7f5e9..3c5054590 100644 --- a/src/SMESH_SWIG/ex06_hole1boolean.py +++ b/src/SMESH_SWIG/ex06_hole1boolean.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -118,6 +119,8 @@ piece_id = addToStudy(piece, "ex06_hole1boolean") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex07_hole1partition.py b/src/SMESH_SWIG/ex07_hole1partition.py index 4ca5c481d..6ef4f6c3d 100644 --- a/src/SMESH_SWIG/ex07_hole1partition.py +++ b/src/SMESH_SWIG/ex07_hole1partition.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -82,6 +83,8 @@ piece_id = addToStudy(piece, "ex07_hole1partition") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex08_hole2build.py b/src/SMESH_SWIG/ex08_hole2build.py index cb417562e..3e6e01b99 100644 --- a/src/SMESH_SWIG/ex08_hole2build.py +++ b/src/SMESH_SWIG/ex08_hole2build.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -115,6 +116,8 @@ piece_id = addToStudy(piece, "ex08_hole2build") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex09_grid4build.py b/src/SMESH_SWIG/ex09_grid4build.py index 4fd9c6db2..be1c47d3d 100644 --- a/src/SMESH_SWIG/ex09_grid4build.py +++ b/src/SMESH_SWIG/ex09_grid4build.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -118,6 +119,8 @@ piece_id = addToStudy(piece, "ex09_grid4build") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex10_grid4geometry.py b/src/SMESH_SWIG/ex10_grid4geometry.py index f9a8c399b..3c0d92706 100644 --- a/src/SMESH_SWIG/ex10_grid4geometry.py +++ b/src/SMESH_SWIG/ex10_grid4geometry.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -80,6 +81,8 @@ piece_id = addToStudy(piece, "ex10_grid4geometry") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex11_grid3partition.py b/src/SMESH_SWIG/ex11_grid3partition.py index 1ed38c03b..6b2407af9 100644 --- a/src/SMESH_SWIG/ex11_grid3partition.py +++ b/src/SMESH_SWIG/ex11_grid3partition.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -101,6 +102,8 @@ piece_id = addToStudy(piece, "ex11_grid3partition") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex12_grid17partition.py b/src/SMESH_SWIG/ex12_grid17partition.py index 3499a3e0b..d4ecdc1d3 100644 --- a/src/SMESH_SWIG/ex12_grid17partition.py +++ b/src/SMESH_SWIG/ex12_grid17partition.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -116,6 +117,8 @@ piece_id = addToStudy(piece, "ex12_grid17partition") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex13_hole1partial.py b/src/SMESH_SWIG/ex13_hole1partial.py index 609f48052..c11080657 100644 --- a/src/SMESH_SWIG/ex13_hole1partial.py +++ b/src/SMESH_SWIG/ex13_hole1partial.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ================================== # from geompy import * @@ -214,6 +215,8 @@ piece_id = addToStudy(piece, "ex13_hole1partial") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a mesh # ------------- diff --git a/src/SMESH_SWIG/ex14_cyl1holed.py b/src/SMESH_SWIG/ex14_cyl1holed.py index 1c89971fc..7f1b1592f 100644 --- a/src/SMESH_SWIG/ex14_cyl1holed.py +++ b/src/SMESH_SWIG/ex14_cyl1holed.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -99,6 +100,8 @@ piece_id = addToStudy(piece, "ex14_cyl1holed") # Maillage # ======== +smesh.SetCurrentStudy(salome.myStudy) + # Creer un maillage hexahedrique # ------------------------------ diff --git a/src/SMESH_SWIG/ex15_cyl2geometry.py b/src/SMESH_SWIG/ex15_cyl2geometry.py index 72a0a4b92..8231b0490 100644 --- a/src/SMESH_SWIG/ex15_cyl2geometry.py +++ b/src/SMESH_SWIG/ex15_cyl2geometry.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -168,7 +169,7 @@ cpd = cpd + r_element # Compound # -------- -piece = RemoveExtraEdges(MakeCompound(cpd), 0) +piece = RemoveExtraEdges(MakeCompound(cpd), True) # Ajouter la piece dans l'etude # ----------------------------- @@ -178,6 +179,8 @@ piece_id = addToStudy(piece, "ex15_cyl2geometry") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex16_cyl2complementary.py b/src/SMESH_SWIG/ex16_cyl2complementary.py index 4a3adf337..b46d11241 100644 --- a/src/SMESH_SWIG/ex16_cyl2complementary.py +++ b/src/SMESH_SWIG/ex16_cyl2complementary.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -108,6 +109,8 @@ piece_id = addToStudy(piece, "ex16_cyl2complementary") # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex17_dome1.py b/src/SMESH_SWIG/ex17_dome1.py index c94136b20..911fdce17 100644 --- a/src/SMESH_SWIG/ex17_dome1.py +++ b/src/SMESH_SWIG/ex17_dome1.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -81,6 +82,8 @@ piece_id = addToStudy(piece, "ex17_dome1") # Maillage # ======== +smesh.SetCurrentStudy(salome.myStudy) + # Maillage hexahedrique # --------------------- diff --git a/src/SMESH_SWIG/ex18_dome2.py b/src/SMESH_SWIG/ex18_dome2.py index fc78722d7..6a614064d 100644 --- a/src/SMESH_SWIG/ex18_dome2.py +++ b/src/SMESH_SWIG/ex18_dome2.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # from geompy import * @@ -118,6 +119,8 @@ piece_id = addToStudy(piece, "ex18_dome2") # Maillage # ======== +smesh.SetCurrentStudy(salome.myStudy) + # Maillage hexahedrique # --------------------- diff --git a/src/SMESH_SWIG/ex19_sphereINcube.py b/src/SMESH_SWIG/ex19_sphereINcube.py index 53b6e2ae6..043a2e312 100644 --- a/src/SMESH_SWIG/ex19_sphereINcube.py +++ b/src/SMESH_SWIG/ex19_sphereINcube.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ================================== # from geompy import * @@ -168,6 +169,8 @@ UnionList(groupe, groupe_sphere) # Meshing # ======= +smesh.SetCurrentStudy(salome.myStudy) + # Create a hexahedral mesh # ------------------------ diff --git a/src/SMESH_SWIG/ex21_lamp.py b/src/SMESH_SWIG/ex21_lamp.py index b7a511d4d..3bb7272f3 100644 --- a/src/SMESH_SWIG/ex21_lamp.py +++ b/src/SMESH_SWIG/ex21_lamp.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ================================== # from geompy import * @@ -93,6 +94,8 @@ UnionIDs(group, faces) # Create a mesh # ============= +smesh.SetCurrentStudy(salome.myStudy) + # Define a mesh on a geometry # --------------------------- diff --git a/src/SMESH_SWIG/ex24_cylinder.py b/src/SMESH_SWIG/ex24_cylinder.py index 2e7b52d82..6dd999cf5 100644 --- a/src/SMESH_SWIG/ex24_cylinder.py +++ b/src/SMESH_SWIG/ex24_cylinder.py @@ -1,8 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -# -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -20,13 +17,14 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ================================== # import math import geompy import smesh - +import salome geo = geompy # Parameters @@ -98,6 +96,8 @@ geo.DifferenceList(group_1, [group_1_box]) # Mesh the blocks with hexahedral # ------------------------------- +smesh.SetCurrentStudy(salome.myStudy) + def discretize(x, y, z, n, s=blocks): p = geo.MakeVertex(x, y, z) e = geo.GetEdgeNearPoint(s, p) diff --git a/src/SMESH_SWIG/ex29_refine.py b/src/SMESH_SWIG/ex29_refine.py index 2f378a1b1..ad6425781 100644 --- a/src/SMESH_SWIG/ex29_refine.py +++ b/src/SMESH_SWIG/ex29_refine.py @@ -1,8 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -# -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -20,6 +17,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # ======================================= # Procedure that take a triangulation and split all triangles in 4 others triangles # diff --git a/src/SMESH_SWIG/ex30_groupsOp.py b/src/SMESH_SWIG/ex30_groupsOp.py index f1a857d9a..4dfff9ffe 100755 --- a/src/SMESH_SWIG/ex30_groupsOp.py +++ b/src/SMESH_SWIG/ex30_groupsOp.py @@ -1,4 +1,22 @@ # -*- coding: iso-8859-1 -*- +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# import sys import salome @@ -16,7 +34,7 @@ global Face_1 Face_1 = geompy.MakeFaceHW(100, 100, 1) geompy.addToStudy( Face_1, "Face_1" ) -#smesh.smesh.SetCurrentStudy(aStudyId) +smesh.SetCurrentStudy(salome.myStudy) import StdMeshers pattern = smesh.GetPattern() Mesh_1 = smesh.Mesh(Face_1) diff --git a/src/SMESH_SWIG/ex30_tepal.py b/src/SMESH_SWIG/ex30_tepal.py index 61a035022..5972e7f2d 100644 --- a/src/SMESH_SWIG/ex30_tepal.py +++ b/src/SMESH_SWIG/ex30_tepal.py @@ -1,7 +1,25 @@ # -*- coding: iso-8859-1 -*- -# CEA/LGLS 2008, Christian Van Wambeke (CEA/LGLS), Francis KLOSS (OCC) -# ==================================================================== +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# +# ==================================================================== +# import os import geompy @@ -28,6 +46,8 @@ geompy.addToStudy(cylinder, "Cylinder") # Define a mesh on a geometry # --------------------------- +smesh.SetCurrentStudy(salome.myStudy) + m = smesh.Mesh(cylinder) # 2D mesh with BLSURF diff --git a/src/SMESH_SWIG/ex31_dimGroup.py b/src/SMESH_SWIG/ex31_dimGroup.py index 7f4600d3f..56d74c6ce 100755 --- a/src/SMESH_SWIG/ex31_dimGroup.py +++ b/src/SMESH_SWIG/ex31_dimGroup.py @@ -1,4 +1,22 @@ # -*- coding: iso-8859-1 -*- +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# import sys import salome @@ -18,7 +36,7 @@ global Box_1 Box_1 = geompy.MakeBoxDXDYDZ(200, 200, 200) geompy.addToStudy( Box_1, "Box_1" ) -#smesh.smesh.SetCurrentStudy(theStudy) +smesh.SetCurrentStudy(salome.myStudy) import StdMeshers Mesh_1 = smesh.Mesh(Box_1) Regular_1D = Mesh_1.Segment() diff --git a/src/SMESH_SWIG/smesh.py b/src/SMESH_SWIG/smesh.py index 217439fa5..a3188f96e 100644 --- a/src/SMESH_SWIG/smesh.py +++ b/src/SMESH_SWIG/smesh.py @@ -1,5 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -20,6 +20,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : smesh.py # Author : Francis KLOSS, OCC # Module : SMESH diff --git a/src/SMESH_SWIG/smeshDC.py b/src/SMESH_SWIG/smeshDC.py index 4789415c9..4cde48b12 100644 --- a/src/SMESH_SWIG/smeshDC.py +++ b/src/SMESH_SWIG/smeshDC.py @@ -1,8 +1,5 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -# -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -20,6 +17,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # File : smesh.py # Author : Francis KLOSS, OCC # Module : SMESH @@ -99,6 +97,7 @@ from SMESH import * import StdMeshers import SALOME +import SALOMEDS # import NETGENPlugin module if possible noNETGENPlugin = 0 @@ -162,6 +161,8 @@ Hexa = 8 Hexotic = 9 BLSURF = 10 GHS3DPRL = 11 +QUADRANGLE = 0 +RADIAL_QUAD = 1 # MirrorType enumeration POINT = SMESH_MeshEditor.POINT @@ -194,6 +195,10 @@ DefaultSize, DefaultGeom, Custom = 0,0,1 PrecisionConfusion = 1e-07 +# TopAbs_State enumeration +[TopAbs_IN, TopAbs_OUT, TopAbs_ON, TopAbs_UNKNOWN] = range(4) + + ## Converts an angle from degrees to radians def DegreesToRadians(AngleInDegrees): from math import pi @@ -391,13 +396,33 @@ NO_NAME = "NoName" ## Gets object name def GetName(obj): - ior = salome.orb.object_to_string(obj) - sobj = salome.myStudy.FindObjectIOR(ior) - if sobj is None: - return NO_NAME - else: - attr = sobj.FindAttribute("AttributeName")[1] - return attr.Value() + if obj: + # object not null + if isinstance(obj, SALOMEDS._objref_SObject): + # study object + return obj.GetName() + ior = salome.orb.object_to_string(obj) + if ior: + # CORBA object + studies = salome.myStudyManager.GetOpenStudies() + for sname in studies: + s = salome.myStudyManager.GetStudyByName(sname) + if not s: continue + sobj = s.FindObjectIOR(ior) + if not sobj: continue + return sobj.GetName() + if hasattr(obj, "GetName"): + # unknown CORBA object, having GetName() method + return obj.GetName() + else: + # unknown CORBA object, no GetName() method + return NO_NAME + pass + if hasattr(obj, "GetName"): + # unknown non-CORBA object, having GetName() method + return obj.GetName() + pass + raise RuntimeError, "Null or invalid object" ## Prints error message if a hypothesis was not assigned. def TreatHypoStatus(status, hypName, geomName, isAlgo): @@ -432,10 +457,12 @@ def TreatHypoStatus(status, hypName, geomName, isAlgo): return hypName = '"' + hypName + '"' geomName= '"' + geomName+ '"' - if status < HYP_UNKNOWN_FATAL: + if status < HYP_UNKNOWN_FATAL and not geomName =='""': print hypName, "was assigned to", geomName,"but", reason - else: + elif not geomName == '""': print hypName, "was not assigned to",geomName,":", reason + else: + print hypName, "was not assigned:", reason pass ## Check meshing plugin availability @@ -1031,17 +1058,20 @@ class Mesh: if (isinstance(algo, geompyDC.GEOM._objref_GEOM_Object)): geom = algo algo = MEFISTO - return Mesh_Triangle(self, algo, geom) ## Creates a quadrangle 2D algorithm for faces. # If the optional \a geom parameter is not set, this algorithm is global. # \n Otherwise, this algorithm defines a submesh based on \a geom subshape. # @param geom If defined, the subshape to be meshed (GEOM_Object) + # @param algo values are: smesh.QUADRANGLE || smesh.RADIAL_QUAD # @return an instance of Mesh_Quadrangle algorithm # @ingroup l3_algos_basic - def Quadrangle(self, geom=0): - return Mesh_Quadrangle(self, geom) + def Quadrangle(self, geom=0, algo=QUADRANGLE): + if algo==RADIAL_QUAD: + return Mesh_RadialQuadrangle1D2D(self,geom) + else: + return Mesh_Quadrangle(self, geom) ## Creates a tetrahedron 3D algorithm for solids. # The parameter \a algo permits to choose the algorithm: NETGEN or GHS3D @@ -1153,8 +1183,62 @@ class Mesh: print "Mesh computation failed, exception caught:" traceback.print_exc() if True:#not ok: - errors = self.smeshpyD.GetAlgoState( self.mesh, geom ) allReasons = "" + + # Treat compute errors + computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, geom ) + for err in computeErrors: + shapeText = "" + if self.mesh.HasShapeToMesh(): + try: + mainIOR = salome.orb.object_to_string(geom) + for sname in salome.myStudyManager.GetOpenStudies(): + s = salome.myStudyManager.GetStudyByName(sname) + if not s: continue + mainSO = s.FindObjectIOR(mainIOR) + if not mainSO: continue + subIt = s.NewChildIterator(mainSO) + while subIt.More(): + subSO = subIt.Value() + subIt.Next() + obj = subSO.GetObject() + if not obj: continue + go = obj._narrow( geompyDC.GEOM._objref_GEOM_Object ) + if not go: continue + ids = go.GetSubShapeIndices() + if len(ids) == 1 and ids[0] == err.subShapeID: + shapeText = ' on "%s"' % subSO.GetName() + break + if not shapeText: + shape = self.geompyD.GetSubShape( geom, [err.subShapeID]) + if shape: + shapeText = " on %s #%s" % (shape.GetShapeType(), err.subShapeID) + else: + shapeText = " on subshape #%s" % (err.subShapeID) + except: + shapeText = " on subshape #%s" % (err.subShapeID) + errText = "" + stdErrors = ["OK", #COMPERR_OK + "Invalid input mesh", #COMPERR_BAD_INPUT_MESH + "std::exception", #COMPERR_STD_EXCEPTION + "OCC exception", #COMPERR_OCC_EXCEPTION + "SALOME exception", #COMPERR_SLM_EXCEPTION + "Unknown exception", #COMPERR_EXCEPTION + "Memory allocation problem", #COMPERR_MEMORY_PB + "Algorithm failed", #COMPERR_ALGO_FAILED + "Unexpected geometry"]#COMPERR_BAD_SHAPE + if err.code > 0: + if err.code < len(stdErrors): errText = stdErrors[err.code] + else: + errText = "code %s" % -err.code + if errText: errText += ". " + errText += err.comment + if allReasons != "":allReasons += "\n" + allReasons += '"%s" failed%s. Error: %s' %(err.algoName, shapeText, errText) + pass + + # Treat hyp errors + errors = self.smeshpyD.GetAlgoState( self.mesh, geom ) for err in errors: if err.isGlobalAlgo: glob = "global" @@ -1180,9 +1264,7 @@ class Mesh: reason = "For unknown reason."+\ " Revise Mesh.Compute() implementation in smeshDC.py!" pass - if allReasons != "": - allReasons += "\n" - pass + if allReasons != "":allReasons += "\n" allReasons += reason pass if allReasons != "": @@ -1201,6 +1283,18 @@ class Mesh: pass return ok + ## Return submesh objects list in meshing order + # @return list of list of submesh objects + # @ingroup l2_construct + def GetMeshOrder(self): + return self.mesh.GetMeshOrder() + + ## Return submesh objects list in meshing order + # @return list of list of submesh objects + # @ingroup l2_construct + def SetMeshOrder(self, submeshes): + return self.mesh.SetMeshOrder(submeshes) + ## Removes all nodes and elements # @ingroup l2_construct def Clear(self): @@ -1271,7 +1365,11 @@ class Mesh: pass status = self.mesh.AddHypothesis(geom, hyp) isAlgo = hyp._narrow( SMESH_Algo ) - TreatHypoStatus( status, GetName( hyp ), GetName( geom ), isAlgo ) + hyp_name = GetName( hyp ) + geom_name = "" + if geom: + geom_name = GetName( geom ) + TreatHypoStatus( status, hyp_name, geom_name, isAlgo ) return status ## Unassigns a hypothesis @@ -1876,6 +1974,12 @@ class Mesh: def GetElementType(self, id, iselem): return self.mesh.GetElementType(id, iselem) + ## Returns the geometric type of mesh element + # @return the value from SMESH::EntityType enumeration + # @ingroup l1_meshinfo + def GetElementGeomType(self, id): + return self.mesh.GetElementGeomType(id) + ## Returns the list of submesh elements IDs # @param Shape a geom object(subshape) IOR # Shape must be the subshape of a ShapeToMesh() @@ -1999,6 +2103,16 @@ class Mesh: def ElemNbFaces(self, id): return self.mesh.ElemNbFaces(id) + ## Returns nodes of given face (counted from zero) for given volumic element. + # @ingroup l1_meshinfo + def GetElemFaceNodes(self,elemId, faceIndex): + return self.mesh.GetElemFaceNodes(elemId, faceIndex) + + ## Returns an element based on all given nodes. + # @ingroup l1_meshinfo + def FindElementByNodes(self,nodes): + return self.mesh.FindElementByNodes(nodes) + ## Returns true if the given element is a polygon # @ingroup l1_meshinfo def IsPoly(self, id): @@ -2241,6 +2355,11 @@ class Mesh: def FindElementsByPoint(self, x, y, z, elementType = SMESH.ALL): return self.editor.FindElementsByPoint(x, y, z, elementType) + # Return point state in a closed 2D mesh in terms of TopAbs_State enumeration. + # TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails. + + def GetPointState(self, x, y, z): + return self.editor.GetPointState(x, y, z) ## Finds the node closest to a point and moves it to a point location # @param x the X coordinate of a point @@ -2373,6 +2492,17 @@ class Mesh: def BestSplit (self, IDOfQuad, theCriterion): return self.editor.BestSplit(IDOfQuad, self.smeshpyD.GetFunctor(theCriterion)) + ## Splits volumic elements into tetrahedrons + # @param elemIDs either list of elements or mesh or group or submesh + # @param method flags passing splitting method: + # 1 - split the hexahedron into 5 tetrahedrons + # 2 - split the hexahedron into 6 tetrahedrons + # @ingroup l2_modif_cutquadr + def SplitVolumesIntoTetra(self, elemIDs, method=1 ): + if isinstance( elemIDs, Mesh ): + elemIDs = elemIDs.GetMesh() + self.editor.SplitVolumesIntoTetra(elemIDs, method) + ## Splits quadrangle faces near triangular facets of volumes # # @ingroup l1_auxiliary @@ -3227,6 +3357,51 @@ class Mesh: mesh.SetParameters(Parameters) return Mesh( self.smeshpyD, self.geompyD, mesh ) + + + ## Scales the object + # @param theObject - the object to translate (mesh, submesh, or group) + # @param thePoint - base point for scale + # @param theScaleFact - scale factors for axises + # @param Copy - allows copying the translated elements + # @param MakeGroups - forces the generation of new groups from existing + # ones (if Copy) + # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, + # empty list otherwise + def Scale(self, theObject, thePoint, theScaleFact, Copy, MakeGroups=False): + if ( isinstance( theObject, Mesh )): + theObject = theObject.GetMesh() + if ( isinstance( theObject, list )): + theObject = self.editor.MakeIDSource(theObject) + + thePoint, Parameters = ParsePointStruct(thePoint) + self.mesh.SetParameters(Parameters) + + if Copy and MakeGroups: + return self.editor.ScaleMakeGroups(theObject, thePoint, theScaleFact) + self.editor.Scale(theObject, thePoint, theScaleFact, Copy) + return [] + + ## Creates a new mesh from the translated object + # @param theObject - the object to translate (mesh, submesh, or group) + # @param thePoint - base point for scale + # @param theScaleFact - scale factors for axises + # @param MakeGroups - forces the generation of new groups from existing ones + # @param NewMeshName - the name of the newly created mesh + # @return instance of Mesh class + def ScaleMakeMesh(self, theObject, thePoint, theScaleFact, MakeGroups=False, NewMeshName=""): + if (isinstance(theObject, Mesh)): + theObject = theObject.GetMesh() + if ( isinstance( theObject, list )): + theObject = self.editor.MakeIDSource(theObject) + + mesh = self.editor.ScaleMakeMesh(theObject, thePoint, theScaleFact, + MakeGroups, NewMeshName) + #mesh.SetParameters(Parameters) + return Mesh( self.smeshpyD, self.geompyD, mesh ) + + + ## Rotates the elements # @param IDsOfElements list of elements ids # @param Axis the axis of rotation (AxisStruct or geom line) @@ -3451,7 +3626,7 @@ class Mesh: ## Creates a hole in a mesh by doubling the nodes of some particular elements # This method provided for convenience works as DoubleNodes() described above. - # @param theNodes identifiers of node to be doubled + # @param theNodeId identifiers of node to be doubled # @param theModifiedElems identifiers of elements to be updated # @return TRUE if operation has been completed successfully, FALSE otherwise # @ingroup l2_modif_edit @@ -3518,7 +3693,7 @@ class Mesh: # The replicated nodes should be associated to affected elements. # @ingroup l2_modif_edit def DoubleNodeElemGroupInRegion(self, theElems, theNodesNot, theShape): - return self.editor.DoubleNodeElemGroup(theElems, theNodesNot, theShape) + return self.editor.DoubleNodeElemGroupInRegion(theElems, theNodesNot, theShape) ## Creates a hole in a mesh by doubling the nodes of some particular elements # This method provided for convenience works as DoubleNodes() described above. @@ -3685,19 +3860,23 @@ class Mesh_Algorithm: raise RuntimeError, "Attemp to create " + algo + " algoritm on None shape" self.mesh = mesh piece = mesh.geom + name = "" if not geom: self.geom = piece else: self.geom = geom - name = GetName(geom) - if name==NO_NAME: + try: + name = GetName(geom) + pass + except: name = mesh.geompyD.SubShapeName(geom, piece) mesh.geompyD.addToStudyInFather(piece, geom, name) + pass self.subm = mesh.mesh.GetSubMesh(geom, algo.GetName()) self.algo = algo status = mesh.mesh.AddHypothesis(self.geom, self.algo) - TreatHypoStatus( status, algo.GetName(), GetName(self.geom), True ) + TreatHypoStatus( status, algo.GetName(), name, True ) def CompareHyp (self, hyp, args): print "CompareHyp is not implemented for ", self.__class__.__name__, ":", hyp.GetName() @@ -3902,10 +4081,13 @@ class Mesh_Segment(Mesh_Algorithm): def FixedPoints1D(self, points, nbSegs=[1], reversedEdges=[], UseExisting=0): if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges reversedEdges, UseExisting = [], reversedEdges + if reversedEdges and isinstance( reversedEdges[0], geompyDC.GEOM._objref_GEOM_Object ): + for i in range( len( reversedEdges )): + reversedEdges[i] = self.mesh.geompyD.GetSubShapeID(self.mesh.geom, reversedEdges[i] ) entry = self.MainShapeEntry() hyp = self.Hypothesis("FixedPoints1D", [points, nbSegs, reversedEdges, entry], UseExisting=UseExisting, - CompareMethod=self.CompareArithmetic1D) + CompareMethod=self.CompareFixedPoints1D) hyp.SetPoints(points) hyp.SetNbSegments(nbSegs) hyp.SetReversedEdges(reversedEdges) @@ -4014,11 +4196,14 @@ class Mesh_Segment(Mesh_Algorithm): ### 0D algorithm if self.geom is None: raise RuntimeError, "Attemp to create SegmentAroundVertex_0D algoritm on None shape" - name = GetName(self.geom) - if name == NO_NAME: + try: + name = GetName(self.geom) + pass + except: piece = self.mesh.geom name = self.mesh.geompyD.SubShapeName(self.geom, piece) self.mesh.geompyD.addToStudyInFather(piece, self.geom, name) + pass algo = self.FindAlgorithm("SegmentAroundVertex_0D", self.mesh.smeshpyD) if algo is None: algo = self.mesh.smeshpyD.CreateHypothesis("SegmentAroundVertex_0D", "libStdMeshersEngine.so") @@ -4415,6 +4600,25 @@ class Mesh_Quadrangle(Mesh_Algorithm): CompareMethod=self.CompareEqualHyp) return hyp + ## Defines "QuadrangleParams" hypothesis + # @param vertex: vertex of a trilateral geometrical face, around which triangles + # will be created while other elements will be quadrangles. + # Vertex can be either a GEOM_Object or a vertex ID within the + # shape to mesh + # @param UseExisting: if ==true - searches for the existing hypothesis created with + # the same parameters, else (default) - creates a new one + # + # @ingroup l3_hypos_additi + def TriangleVertex(self, vertex, UseExisting=0): + vertexID = vertex + if isinstance( vertexID, geompyDC.GEOM._objref_GEOM_Object ): + vertexID = self.mesh.geompyD.GetSubShapeID( self.mesh.geom, vertex ) + hyp = self.Hypothesis("QuadrangleParams", [vertexID], UseExisting = UseExisting, + CompareMethod=lambda hyp,args: hyp.GetTriaVertex()==args[0]) + hyp.SetTriaVertex( vertexID ) + return hyp + + # Public class: Mesh_Tetrahedron # ------------------------------ @@ -4912,6 +5116,7 @@ class Mesh_RadialPrism3D(Mesh_Algorithm): self.mesh.GetMesh().RemoveHypothesis( self.geom, self.nbLayers ) self.mesh.GetMesh().AddHypothesis( self.geom, self.distribHyp ) study = self.mesh.smeshpyD.GetCurrentStudy() # prevents publishing own 1D hypothesis + self.mesh.smeshpyD.SetCurrentStudy( None ) hyp = self.mesh.smeshpyD.CreateHypothesis(hypType, so) self.mesh.smeshpyD.SetCurrentStudy( study ) # enables publishing self.distribHyp.SetLayerDistribution( hyp ) @@ -4998,7 +5203,7 @@ class Mesh_RadialQuadrangle1D2D(Mesh_Algorithm): Mesh_Algorithm.__init__(self) self.Create(mesh, geom, "RadialQuadrangle_1D2D") - self.distribHyp = self.Hypothesis("LayerDistribution2D", UseExisting=0) + self.distribHyp = None #self.Hypothesis("LayerDistribution2D", UseExisting=0) self.nbLayers = None ## Return 2D hypothesis holding the 1D one @@ -5009,21 +5214,26 @@ class Mesh_RadialQuadrangle1D2D(Mesh_Algorithm): # hypothesis. Returns the created hypothesis def OwnHypothesis(self, hypType, args=[], so="libStdMeshersEngine.so"): #print "OwnHypothesis",hypType - if not self.nbLayers is None: + if self.nbLayers: self.mesh.GetMesh().RemoveHypothesis( self.geom, self.nbLayers ) + if self.distribHyp is None: + self.distribHyp = self.Hypothesis("LayerDistribution2D", UseExisting=0) + else: self.mesh.GetMesh().AddHypothesis( self.geom, self.distribHyp ) study = self.mesh.smeshpyD.GetCurrentStudy() # prevents publishing own 1D hypothesis + self.mesh.smeshpyD.SetCurrentStudy( None ) hyp = self.mesh.smeshpyD.CreateHypothesis(hypType, so) self.mesh.smeshpyD.SetCurrentStudy( study ) # enables publishing self.distribHyp.SetLayerDistribution( hyp ) return hyp - ## Defines "NumberOfLayers2D" hypothesis, specifying the number of layers + ## Defines "NumberOfLayers" hypothesis, specifying the number of layers # @param n number of layers # @param UseExisting if ==true - searches for the existing hypothesis created with # the same parameters, else (default) - creates a new one - def NumberOfLayers2D(self, n, UseExisting=0): - self.mesh.GetMesh().RemoveHypothesis( self.geom, self.distribHyp ) + def NumberOfLayers(self, n, UseExisting=0): + if self.distribHyp: + self.mesh.GetMesh().RemoveHypothesis( self.geom, self.distribHyp ) self.nbLayers = self.Hypothesis("NumberOfLayers2D", [n], UseExisting=UseExisting, CompareMethod=self.CompareNumberOfLayers) self.nbLayers.SetNumberOfLayers( n ) diff --git a/src/SMESH_SWIG_WITHIHM/Makefile.am b/src/SMESH_SWIG_WITHIHM/Makefile.am index 5370d7f3e..fc6d37ea1 100644 --- a/src/SMESH_SWIG_WITHIHM/Makefile.am +++ b/src/SMESH_SWIG_WITHIHM/Makefile.am @@ -1,7 +1,4 @@ -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -# -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # SMESH SMESHGUI : GUI for SMESH component # File : Makefile.am # Author : Alexander BORODIN, Open CASCADE S.A.S. diff --git a/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.cxx b/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.cxx index 4766864a2..05e44fb94 100644 --- a/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.cxx +++ b/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : GUI for SMESH component // File : libSMESH_Swig.cxx // Author : Nicolas REJNERI, Open CASCADE S.A.S. @@ -71,10 +69,10 @@ namespace inline SALOMEDS::SObject_var GetDomainRoot(const SALOMEDS::SComponent_var& theSComponentMesh, - const SALOMEDS::StudyBuilder_var& theStudyBuilder, - CORBA::Long theDomainRootTag, - const QString& theName, - const QString& thePixmap) + const SALOMEDS::StudyBuilder_var& theStudyBuilder, + CORBA::Long theDomainRootTag, + const QString& theName, + const QString& thePixmap) { SALOMEDS::SObject_var aDomainRoot; if (!theSComponentMesh->FindSubObject(theDomainRootTag,aDomainRoot)) { @@ -98,13 +96,13 @@ namespace inline SALOMEDS::SObject_var GetHypothesisRoot(const SALOMEDS::SComponent_var& theSComponentMesh, - const SALOMEDS::StudyBuilder_var& theStudyBuilder) + const SALOMEDS::StudyBuilder_var& theStudyBuilder) { return GetDomainRoot(theSComponentMesh, - theStudyBuilder, - SMESH::Tag_HypothesisRoot, - QObject::tr("SMESH_MEN_HYPOTHESIS"), - "ICON_SMESH_TREE_HYPO"); + theStudyBuilder, + SMESH::Tag_HypothesisRoot, + QObject::tr("SMESH_MEN_HYPOTHESIS"), + "ICON_SMESH_TREE_HYPO"); } @@ -112,13 +110,13 @@ namespace inline SALOMEDS::SObject_var GetAlgorithmsRoot(const SALOMEDS::SComponent_var& theSComponentMesh, - const SALOMEDS::StudyBuilder_var& theStudyBuilder) + const SALOMEDS::StudyBuilder_var& theStudyBuilder) { return GetDomainRoot(theSComponentMesh, - theStudyBuilder, - SMESH::Tag_AlgorithmsRoot, - QObject::tr("SMESH_MEN_ALGORITHMS"), - "ICON_SMESH_TREE_ALGO"); + theStudyBuilder, + SMESH::Tag_AlgorithmsRoot, + QObject::tr("SMESH_MEN_ALGORITHMS"), + "ICON_SMESH_TREE_ALGO"); } @@ -126,17 +124,17 @@ namespace inline SALOMEDS::SObject_var AddToDomain(const std::string& theIOR, - const SALOMEDS::SComponent_var& theSComponentMesh, - const SALOMEDS::StudyBuilder_var& theStudyBuilder, - CORBA::Long theDomainRootTag, - const QString& theDomainName, - const QString& theDomainPixmap) + const SALOMEDS::SComponent_var& theSComponentMesh, + const SALOMEDS::StudyBuilder_var& theStudyBuilder, + CORBA::Long theDomainRootTag, + const QString& theDomainName, + const QString& theDomainPixmap) { SALOMEDS::SObject_var aDomain = GetDomainRoot(theSComponentMesh, - theStudyBuilder, - SMESH::Tag_AlgorithmsRoot, - theDomainName, - theDomainPixmap); + theStudyBuilder, + SMESH::Tag_AlgorithmsRoot, + theDomainName, + theDomainPixmap); // Add New Hypothesis SALOMEDS::SObject_var aSObject = theStudyBuilder->NewObject(aDomain); SALOMEDS::GenericAttribute_var anAttr = theStudyBuilder->FindOrCreateAttribute(aSObject,"AttributePixMap"); @@ -157,42 +155,42 @@ namespace //--------------------------------------------------------------- SALOMEDS::SObject_var AddHypothesis(const std::string& theIOR, - const SALOMEDS::SComponent_var& theSComponentMesh, - const SALOMEDS::StudyBuilder_var& theStudyBuilder) + const SALOMEDS::SComponent_var& theSComponentMesh, + const SALOMEDS::StudyBuilder_var& theStudyBuilder) { return AddToDomain(theIOR, - theSComponentMesh, - theStudyBuilder, - SMESH::Tag_HypothesisRoot, - QObject::tr("SMESH_MEN_HYPOTHESIS"), - "ICON_SMESH_TREE_HYPO"); + theSComponentMesh, + theStudyBuilder, + SMESH::Tag_HypothesisRoot, + QObject::tr("SMESH_MEN_HYPOTHESIS"), + "ICON_SMESH_TREE_HYPO"); } //--------------------------------------------------------------- SALOMEDS::SObject_var AddAlgorithms(const std::string& theIOR, - const SALOMEDS::SComponent_var& theSComponentMesh, - const SALOMEDS::StudyBuilder_var& theStudyBuilder) + const SALOMEDS::SComponent_var& theSComponentMesh, + const SALOMEDS::StudyBuilder_var& theStudyBuilder) { return AddToDomain(theIOR, - theSComponentMesh, - theStudyBuilder, - SMESH::Tag_AlgorithmsRoot, - QObject::tr("SMESH_MEN_ALGORITHMS"), - "ICON_SMESH_TREE_ALGO"); + theSComponentMesh, + theStudyBuilder, + SMESH::Tag_AlgorithmsRoot, + QObject::tr("SMESH_MEN_ALGORITHMS"), + "ICON_SMESH_TREE_ALGO"); } //--------------------------------------------------------------- void SetDomain(const char* theMeshOrSubMeshEntry, - const char* theDomainEntry, - const SALOMEDS::Study_var& theStudy, - const SALOMEDS::StudyBuilder_var& theStudyBuilder, - long theRefOnAppliedDomainTag, - const QString& theAppliedDomainMEN, - const QString& theAppliedDomainICON) + const char* theDomainEntry, + const SALOMEDS::Study_var& theStudy, + const SALOMEDS::StudyBuilder_var& theStudyBuilder, + long theRefOnAppliedDomainTag, + const QString& theAppliedDomainMEN, + const QString& theAppliedDomainICON) { SALOMEDS::SObject_var aMeshOrSubMeshSO = theStudy->FindObjectID(theMeshOrSubMeshEntry); SALOMEDS::SObject_var aHypothesisSO = theStudy->FindObjectID(theDomainEntry); @@ -201,17 +199,17 @@ namespace //Find or Create Applied Hypothesis root SALOMEDS::SObject_var anAppliedDomainSO; if(!aMeshOrSubMeshSO->FindSubObject(theRefOnAppliedDomainTag,anAppliedDomainSO)){ - anAppliedDomainSO = theStudyBuilder->NewObjectToTag(aMeshOrSubMeshSO,theRefOnAppliedDomainTag); - SALOMEDS::GenericAttribute_var anAttr = - theStudyBuilder->FindOrCreateAttribute(anAppliedDomainSO,"AttributeName"); - SALOMEDS::AttributeName_var aName = SALOMEDS::AttributeName::_narrow(anAttr); - aName->SetValue(theAppliedDomainMEN.toLatin1().data()); - anAttr = theStudyBuilder->FindOrCreateAttribute(anAppliedDomainSO,"AttributeSelectable"); - SALOMEDS::AttributeSelectable_var aSelAttr = SALOMEDS::AttributeSelectable::_narrow(anAttr); - aSelAttr->SetSelectable(false); - anAttr = theStudyBuilder->FindOrCreateAttribute(anAppliedDomainSO,"AttributePixMap"); - SALOMEDS::AttributePixMap_var aPixmap = SALOMEDS::AttributePixMap::_narrow(anAttr); - aPixmap->SetPixMap(theAppliedDomainICON.toLatin1().data()); + anAppliedDomainSO = theStudyBuilder->NewObjectToTag(aMeshOrSubMeshSO,theRefOnAppliedDomainTag); + SALOMEDS::GenericAttribute_var anAttr = + theStudyBuilder->FindOrCreateAttribute(anAppliedDomainSO,"AttributeName"); + SALOMEDS::AttributeName_var aName = SALOMEDS::AttributeName::_narrow(anAttr); + aName->SetValue(theAppliedDomainMEN.toLatin1().data()); + anAttr = theStudyBuilder->FindOrCreateAttribute(anAppliedDomainSO,"AttributeSelectable"); + SALOMEDS::AttributeSelectable_var aSelAttr = SALOMEDS::AttributeSelectable::_narrow(anAttr); + aSelAttr->SetSelectable(false); + anAttr = theStudyBuilder->FindOrCreateAttribute(anAppliedDomainSO,"AttributePixMap"); + SALOMEDS::AttributePixMap_var aPixmap = SALOMEDS::AttributePixMap::_narrow(anAttr); + aPixmap->SetPixMap(theAppliedDomainICON.toLatin1().data()); } SALOMEDS::SObject_var aSObject = theStudyBuilder->NewObject(anAppliedDomainSO); theStudyBuilder->Addreference(aSObject,aHypothesisSO); @@ -222,34 +220,34 @@ namespace //--------------------------------------------------------------- void SetHypothesis(const char* theMeshOrSubMeshEntry, - const char* theDomainEntry, - const SALOMEDS::Study_var& theStudy, - const SALOMEDS::StudyBuilder_var& theStudyBuilder) + const char* theDomainEntry, + const SALOMEDS::Study_var& theStudy, + const SALOMEDS::StudyBuilder_var& theStudyBuilder) { SetDomain(theMeshOrSubMeshEntry, - theDomainEntry, - theStudy, - theStudyBuilder, - SMESH::Tag_RefOnAppliedHypothesis, - QObject::tr("SMESH_MEN_APPLIED_HYPOTHESIS"), - "ICON_SMESH_TREE_HYPO"); + theDomainEntry, + theStudy, + theStudyBuilder, + SMESH::Tag_RefOnAppliedHypothesis, + QObject::tr("SMESH_MEN_APPLIED_HYPOTHESIS"), + "ICON_SMESH_TREE_HYPO"); } //--------------------------------------------------------------- void SetAlgorithms(const char* theMeshOrSubMeshEntry, - const char* theDomainEntry, - const SALOMEDS::Study_var& theStudy, - const SALOMEDS::StudyBuilder_var& theStudyBuilder) + const char* theDomainEntry, + const SALOMEDS::Study_var& theStudy, + const SALOMEDS::StudyBuilder_var& theStudyBuilder) { SetDomain(theMeshOrSubMeshEntry, - theDomainEntry, - theStudy, - theStudyBuilder, - SMESH::Tag_RefOnAppliedAlgorithms, - QObject::tr("SMESH_MEN_APPLIED_ALGORIHTMS"), - "ICON_SMESH_TREE_ALGO"); + theDomainEntry, + theStudy, + theStudyBuilder, + SMESH::Tag_RefOnAppliedAlgorithms, + QObject::tr("SMESH_MEN_APPLIED_ALGORIHTMS"), + "ICON_SMESH_TREE_ALGO"); } } @@ -271,11 +269,11 @@ SMESH_Swig::SMESH_Swig() Execute() { try { - ORB_INIT &anORBInit = *SINGLETON_::Instance(); - ASSERT(SINGLETON_::IsAlreadyExisting()); - myORB = anORBInit( 0, 0 ); + ORB_INIT &anORBInit = *SINGLETON_::Instance(); + ASSERT(SINGLETON_::IsAlreadyExisting()); + myORB = anORBInit( 0, 0 ); } catch (...) { - INFOS("internal error : orb not found"); + INFOS("internal error : orb not found"); } } }; @@ -301,9 +299,9 @@ SMESH_Swig::Init(int theStudyID) SALOMEDS::SComponent_var& mySComponentMesh; public: TEvent(int theStudyID, - SALOMEDS::Study_var& theStudy, - SALOMEDS::StudyBuilder_var& theStudyBuilder, - SALOMEDS::SComponent_var& theSComponentMesh): + SALOMEDS::Study_var& theStudy, + SALOMEDS::StudyBuilder_var& theStudyBuilder, + SALOMEDS::SComponent_var& theSComponentMesh): myStudyID(theStudyID), myStudy(theStudy), myStudyBuilder(theStudyBuilder), @@ -334,28 +332,28 @@ SMESH_Swig::Init(int theStudyID) SALOMEDS::SComponent_var aSComponent = myStudy->FindComponent("SMESH"); if(aSComponent->_is_nil()){ - bool aLocked = myStudy->GetProperties()->IsLocked(); - if (aLocked) - myStudy->GetProperties()->SetLocked(false); - - aSComponent = myStudyBuilder->NewComponent("SMESH"); - anAttr = myStudyBuilder->FindOrCreateAttribute(aSComponent,"AttributeName"); - aName = SALOMEDS::AttributeName::_narrow(anAttr); - - SMESHGUI* aSMESHGUI = SMESHGUI::GetSMESHGUI(); //SRN: BugID IPAL9186, load a SMESH gui if it hasn't been loaded - if (!aSMESHGUI){ - CAM_Module* aModule = anApp->module("Mesh"); - if(!aModule) - aModule = anApp->loadModule("Mesh"); - aSMESHGUI = dynamic_cast(aModule); - } //SRN: BugID IPAL9186: end of a fix - aName->SetValue(aSMESHGUI->moduleName().toLatin1().data()); - anAttr = myStudyBuilder->FindOrCreateAttribute(aSComponent,"AttributePixMap"); - aPixmap = SALOMEDS::AttributePixMap::_narrow(anAttr); - aPixmap->SetPixMap( "ICON_OBJBROWSER_SMESH" ); - myStudyBuilder->DefineComponentInstance(aSComponent,aSMESHGen); - if (aLocked) - myStudy->GetProperties()->SetLocked(true); + bool aLocked = myStudy->GetProperties()->IsLocked(); + if (aLocked) + myStudy->GetProperties()->SetLocked(false); + + aSComponent = myStudyBuilder->NewComponent("SMESH"); + anAttr = myStudyBuilder->FindOrCreateAttribute(aSComponent,"AttributeName"); + aName = SALOMEDS::AttributeName::_narrow(anAttr); + + SMESHGUI* aSMESHGUI = SMESHGUI::GetSMESHGUI(); //SRN: BugID IPAL9186, load a SMESH gui if it hasn't been loaded + if (!aSMESHGUI){ + CAM_Module* aModule = anApp->module("Mesh"); + if(!aModule) + aModule = anApp->loadModule("Mesh"); + aSMESHGUI = dynamic_cast(aModule); + } //SRN: BugID IPAL9186: end of a fix + aName->SetValue(aSMESHGUI->moduleName().toLatin1().data()); + anAttr = myStudyBuilder->FindOrCreateAttribute(aSComponent,"AttributePixMap"); + aPixmap = SALOMEDS::AttributePixMap::_narrow(anAttr); + aPixmap->SetPixMap( "ICON_OBJBROWSER_SMESH" ); + myStudyBuilder->DefineComponentInstance(aSComponent,aSMESHGen); + if (aLocked) + myStudy->GetProperties()->SetLocked(true); } mySComponentMesh = SALOMEDS::SComponent::_narrow(aSComponent); @@ -367,9 +365,9 @@ SMESH_Swig::Init(int theStudyID) MESSAGE("Init"); ProcessVoidEvent(new TEvent(theStudyID, - myStudy, - myStudyBuilder, - mySComponentMesh)); + myStudy, + myStudyBuilder, + mySComponentMesh)); } @@ -414,8 +412,8 @@ const char* SMESH_Swig::AddNewHypothesis(const char* theIOR) MESSAGE("AddNewHypothesis"); SALOMEDS::SObject_var aSObject = ::AddHypothesis(theIOR, - mySComponentMesh, - myStudyBuilder); + mySComponentMesh, + myStudyBuilder); CORBA::String_var anEntry = aSObject->GetID(); return anEntry._retn(); } @@ -427,8 +425,8 @@ const char* SMESH_Swig::AddNewAlgorithms(const char* theIOR) MESSAGE("AddNewAlgorithms"); SALOMEDS::SObject_var aSObject = ::AddAlgorithms(theIOR, - mySComponentMesh, - myStudyBuilder); + mySComponentMesh, + myStudyBuilder); CORBA::String_var anEntry = aSObject->GetID(); return anEntry._retn(); } @@ -453,9 +451,9 @@ void SMESH_Swig::SetHypothesis(const char* theMeshOrSubMeshEntry, const char* theDomainEntry) { ::SetHypothesis(theMeshOrSubMeshEntry, - theDomainEntry, - myStudy, - myStudyBuilder); + theDomainEntry, + myStudy, + myStudyBuilder); } @@ -464,9 +462,9 @@ void SMESH_Swig::SetAlgorithms(const char* theMeshOrSubMeshEntry, const char* theDomainEntry) { ::SetAlgorithms(theMeshOrSubMeshEntry, - theDomainEntry, - myStudy, - myStudyBuilder); + theDomainEntry, + myStudy, + myStudyBuilder); } @@ -599,7 +597,7 @@ void SMESH_Swig::SetName(const char* theEntry, //================================================================================ void SMESH_Swig::SetMeshIcon(const char* theMeshEntry, - const bool theIsComputed, + const bool theIsComputed, const bool isEmpty) { class TEvent: public SALOME_Event @@ -609,8 +607,8 @@ void SMESH_Swig::SetMeshIcon(const char* theMeshEntry, bool myIsComputed, myIsEmpty; public: TEvent(const SALOMEDS::Study_var& theStudy, - const std::string& theMeshEntry, - const bool theIsComputed, + const std::string& theMeshEntry, + const bool theIsComputed, const bool isEmpty): myStudy(theStudy), myMeshEntry(theMeshEntry), @@ -624,13 +622,13 @@ void SMESH_Swig::SetMeshIcon(const char* theMeshEntry, { SALOMEDS::SObject_var aMeshSO = myStudy->FindObjectID(myMeshEntry.c_str()); if(!aMeshSO->_is_nil()) - if(_PTR(SObject) aMesh = ClientFactory::SObject(aMeshSO)) - SMESH::ModifiedMesh(aMesh,myIsComputed,myIsEmpty); + if(_PTR(SObject) aMesh = ClientFactory::SObject(aMeshSO)) + SMESH::ModifiedMesh(aMesh,myIsComputed,myIsEmpty); } }; ProcessVoidEvent(new TEvent(myStudy, - theMeshEntry, - theIsComputed, + theMeshEntry, + theIsComputed, isEmpty)); } diff --git a/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.h b/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.h index bf60f35ff..7e7f1c600 100644 --- a/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.h +++ b/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.h @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : GUI for SMESH component // File : libSMESH_Swig.h // Author : Nicolas REJNERI, Open CASCADE S.A.S. diff --git a/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.i b/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.i index a865a8e95..bd795139c 100644 --- a/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.i +++ b/src/SMESH_SWIG_WITHIHM/libSMESH_Swig.i @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESHGUI : GUI for SMESH component // File : libSMESH_Swig.i // Author : Nicolas REJNERI, Open CASCADE S.A.S. diff --git a/src/StdMeshers/Makefile.am b/src/StdMeshers/Makefile.am index 1b51b3afb..ca9794c84 100644 --- a/src/StdMeshers/Makefile.am +++ b/src/StdMeshers/Makefile.am @@ -1,7 +1,4 @@ -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -# -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # SMESH StdMeshers : implementaion of SMESH idl descriptions # File : Makefile.in # Author : Julia DOROVSKIKH @@ -73,7 +71,8 @@ salomeinclude_HEADERS = \ StdMeshers_CompositeHexa_3D.hxx \ StdMeshers_MaxLength.hxx \ StdMeshers_QuadrangleParams.hxx \ - StdMeshers_RadialQuadrangle_1D2D.hxx + StdMeshers_RadialQuadrangle_1D2D.hxx \ + StdMeshers_HexaFromSkin_3D.hxx # Libraries targets @@ -123,7 +122,8 @@ dist_libStdMeshers_la_SOURCES = \ StdMeshers_CompositeHexa_3D.cxx \ StdMeshers_MaxLength.cxx \ StdMeshers_QuadrangleParams.cxx \ - StdMeshers_RadialQuadrangle_1D2D.cxx + StdMeshers_RadialQuadrangle_1D2D.cxx \ + StdMeshers_HexaFromSkin_3D.cxx # additionnal information to compil and link file diff --git a/src/StdMeshers/SMESH_StdMeshers.hxx b/src/StdMeshers/SMESH_StdMeshers.hxx index aeee7480d..d65e082fb 100755 --- a/src/StdMeshers/SMESH_StdMeshers.hxx +++ b/src/StdMeshers/SMESH_StdMeshers.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : SMESH_StdMeshers.hxx // Author : Alexander BORODIN // Module : SMESH diff --git a/src/StdMeshers/StdMeshers_Arithmetic1D.cxx b/src/StdMeshers/StdMeshers_Arithmetic1D.cxx index a24909a0c..9752bc6c4 100644 --- a/src/StdMeshers/StdMeshers_Arithmetic1D.cxx +++ b/src/StdMeshers/StdMeshers_Arithmetic1D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Arithmetic1D.cxx // Author : Damien COQUERET, OCC diff --git a/src/StdMeshers/StdMeshers_Arithmetic1D.hxx b/src/StdMeshers/StdMeshers_Arithmetic1D.hxx index e3f3c37a8..c65e17b67 100644 --- a/src/StdMeshers/StdMeshers_Arithmetic1D.hxx +++ b/src/StdMeshers/StdMeshers_Arithmetic1D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Arithmetic1D.hxx // Author : Damien COQUERET, OCC diff --git a/src/StdMeshers/StdMeshers_AutomaticLength.cxx b/src/StdMeshers/StdMeshers_AutomaticLength.cxx index 95710c94e..e7bd4e993 100644 --- a/src/StdMeshers/StdMeshers_AutomaticLength.cxx +++ b/src/StdMeshers/StdMeshers_AutomaticLength.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_AutomaticLength.cxx // Author : Edward AGAPOV, OCC diff --git a/src/StdMeshers/StdMeshers_AutomaticLength.hxx b/src/StdMeshers/StdMeshers_AutomaticLength.hxx index 627003aa6..0bf8aa25c 100644 --- a/src/StdMeshers/StdMeshers_AutomaticLength.hxx +++ b/src/StdMeshers/StdMeshers_AutomaticLength.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,11 +19,12 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_AutomaticLength.hxx // Author : Edward AGAPOV, OCC // Module : SMESH - +// #ifndef _SMESH_AutomaticLength_HXX_ #define _SMESH_AutomaticLength_HXX_ diff --git a/src/StdMeshers/StdMeshers_CompositeHexa_3D.cxx b/src/StdMeshers/StdMeshers_CompositeHexa_3D.cxx index 38bbdeaf3..d55c17513 100644 --- a/src/StdMeshers/StdMeshers_CompositeHexa_3D.cxx +++ b/src/StdMeshers/StdMeshers_CompositeHexa_3D.cxx @@ -1,29 +1,28 @@ -// SMESH SMESH : implementaion of SMESH idl descriptions +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. +// +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. +// +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // -// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS -// -// This library is free software; you can redistribute it and/or -// modify it under the terms of the GNU Lesser General Public -// License as published by the Free Software Foundation; either -// version 2.1 of the License. -// -// This library is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -// Lesser General Public License for more details. -// -// You should have received a copy of the GNU Lesser General Public -// License along with this library; if not, write to the Free Software -// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -// -// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + +// SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_CompositeHexa_3D.cxx // Module : SMESH // Created : Tue Nov 25 11:04:59 2008 // Author : Edward AGAPOV (eap) - +// #include "StdMeshers_CompositeHexa_3D.hxx" #include "SMDS_Mesh.hxx" diff --git a/src/StdMeshers/StdMeshers_CompositeHexa_3D.hxx b/src/StdMeshers/StdMeshers_CompositeHexa_3D.hxx index 8fd14ba06..01b373d86 100644 --- a/src/StdMeshers/StdMeshers_CompositeHexa_3D.hxx +++ b/src/StdMeshers/StdMeshers_CompositeHexa_3D.hxx @@ -1,29 +1,26 @@ -// SMESH SMESH : implementaion of SMESH idl descriptions +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. // -// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS -// -// This library is free software; you can redistribute it and/or -// modify it under the terms of the GNU Lesser General Public -// License as published by the Free Software Foundation; either -// version 2.1 of the License. -// -// This library is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -// Lesser General Public License for more details. -// -// You should have received a copy of the GNU Lesser General Public -// License along with this library; if not, write to the Free Software -// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -// -// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. // +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + +// SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_CompositeBlock_3D.hxx // Module : SMESH - +// #ifndef _SMESH_CompositeSegment_1D_HXX_ #define _SMESH_CompositeSegment_1D_HXX_ @@ -48,7 +45,7 @@ public: //virtual ~StdMeshers_CompositeHexa_3D(); virtual bool Compute(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape); + const TopoDS_Shape& aShape); virtual bool Evaluate(SMESH_Mesh & aMesh, const TopoDS_Shape & aShape, MapShapeNbElems& aResMap); diff --git a/src/StdMeshers/StdMeshers_CompositeSegment_1D.cxx b/src/StdMeshers/StdMeshers_CompositeSegment_1D.cxx index eee3ef012..17161d9ef 100644 --- a/src/StdMeshers/StdMeshers_CompositeSegment_1D.cxx +++ b/src/StdMeshers/StdMeshers_CompositeSegment_1D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Regular_1D.cxx // Moved here from SMESH_Regular_1D.cxx @@ -73,15 +74,16 @@ namespace { */ //================================================================================ - TopoDS_Edge nextC1Edge(const TopoDS_Edge& edge, - SMESH_Mesh & aMesh, - const bool forward) + TopoDS_Edge nextC1Edge(TopoDS_Edge edge, + SMESH_Mesh & aMesh, + const bool forward) { + if (edge.Orientation() > TopAbs_REVERSED) // INTERNAL + edge.Orientation( TopAbs_FORWARD ); TopoDS_Edge eNext; TopTools_MapOfShape edgeCounter; edgeCounter.Add( edge ); - TopoDS_Vertex v; - v = forward ? TopExp::LastVertex( edge,1 ) : TopExp::FirstVertex( edge,1 ); + TopoDS_Vertex v = forward ? TopExp::LastVertex(edge,true) : TopExp::FirstVertex(edge,true); TopTools_ListIteratorOfListOfShape ancestIt = aMesh.GetAncestors( v ); for ( ; ancestIt.More(); ancestIt.Next() ) { @@ -92,11 +94,11 @@ namespace { if ( edgeCounter.Extent() < 3 && !eNext.IsNull() ) { if ( SMESH_Algo::IsContinuous( edge, eNext )) { // care of orientation - bool reverse; - if ( forward ) - reverse = ( !v.IsSame( TopExp::FirstVertex( eNext, true ))); - else - reverse = ( !v.IsSame( TopExp::LastVertex( eNext, true ))); + if (eNext.Orientation() > TopAbs_REVERSED) // INTERNAL + eNext.Orientation( TopAbs_FORWARD ); + TopoDS_Vertex vn = + forward ? TopExp::FirstVertex(eNext,true) : TopExp::LastVertex(eNext,true); + bool reverse = (!v.IsSame(vn)); if ( reverse ) eNext.Reverse(); return eNext; @@ -297,14 +299,17 @@ StdMeshers_CompositeSegment_1D::GetFaceSide(SMESH_Mesh& aMesh, const bool ignoreMeshed) { list< TopoDS_Edge > edges; - edges.push_back( anEdge ); + if ( anEdge.Orientation() <= TopAbs_REVERSED ) + edges.push_back( anEdge ); + else + edges.push_back( TopoDS::Edge( anEdge.Oriented( TopAbs_FORWARD ))); // PAL21718 list hypList; SMESH_Algo* theAlgo = aMesh.GetGen()->GetAlgo( aMesh, anEdge ); if ( theAlgo ) hypList = theAlgo->GetUsedHypothesis(aMesh, anEdge, false); for ( int forward = 0; forward < 2; ++forward ) { - TopoDS_Edge eNext = nextC1Edge( anEdge, aMesh, forward ); + TopoDS_Edge eNext = nextC1Edge( edges.back(), aMesh, forward ); while ( !eNext.IsNull() ) { if ( ignoreMeshed ) { // eNext must not have computed mesh diff --git a/src/StdMeshers/StdMeshers_CompositeSegment_1D.hxx b/src/StdMeshers/StdMeshers_CompositeSegment_1D.hxx index 1ec160335..7f003f4ae 100644 --- a/src/StdMeshers/StdMeshers_CompositeSegment_1D.hxx +++ b/src/StdMeshers/StdMeshers_CompositeSegment_1D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_CompositeSegment_1D.hxx // Module : SMESH @@ -43,7 +44,7 @@ public: virtual ~StdMeshers_CompositeSegment_1D(); virtual bool Compute(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape); + const TopoDS_Shape& aShape); /*! * \brief Sets event listener to submeshes if necessary * \param subMesh - submesh where algo is set diff --git a/src/StdMeshers/StdMeshers_Deflection1D.cxx b/src/StdMeshers/StdMeshers_Deflection1D.cxx index 42ad9219a..7a8650601 100644 --- a/src/StdMeshers/StdMeshers_Deflection1D.cxx +++ b/src/StdMeshers/StdMeshers_Deflection1D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers_Deflection1D : implementaion of SMESH idl descriptions // File : StdMeshers_Deflection1D.cxx // Module : SMESH diff --git a/src/StdMeshers/StdMeshers_Deflection1D.hxx b/src/StdMeshers/StdMeshers_Deflection1D.hxx index a3cf19b70..8a92b037c 100644 --- a/src/StdMeshers/StdMeshers_Deflection1D.hxx +++ b/src/StdMeshers/StdMeshers_Deflection1D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,11 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of SMESH idl descriptions // File : StdMeshers_Deflection1D.hxx // Module : SMESH // - #ifndef _StdMeshers_Deflection1D_HXX_ #define _StdMeshers_Deflection1D_HXX_ diff --git a/src/StdMeshers/StdMeshers_Distribution.cxx b/src/StdMeshers/StdMeshers_Distribution.cxx index f2e591f34..974c7ffa7 100644 --- a/src/StdMeshers/StdMeshers_Distribution.cxx +++ b/src/StdMeshers/StdMeshers_Distribution.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of point distribution algorithm // File : StdMeshers_Distribution.cxx // Author : Alexandre SOLOVYOV @@ -303,21 +304,21 @@ double dihotomySolve( Function& f, const double val, const double _start, const } bool buildDistribution( const TCollection_AsciiString& f, const int conv, const double start, const double end, - const int nbSeg, vector& data, const double eps ) + const int nbSeg, vector& data, const double eps ) { FunctionExpr F( f.ToCString(), conv ); return buildDistribution( F, start, end, nbSeg, data, eps ); } bool buildDistribution( const std::vector& f, const int conv, const double start, const double end, - const int nbSeg, vector& data, const double eps ) + const int nbSeg, vector& data, const double eps ) { FunctionTable F( f, conv ); return buildDistribution( F, start, end, nbSeg, data, eps ); } bool buildDistribution( const Function& func, const double start, const double end, const int nbSeg, - vector& data, const double eps ) + vector& data, const double eps ) { if( nbSeg<=0 ) return false; diff --git a/src/StdMeshers/StdMeshers_Distribution.hxx b/src/StdMeshers/StdMeshers_Distribution.hxx index 373305b63..2f5214a2b 100644 --- a/src/StdMeshers/StdMeshers_Distribution.hxx +++ b/src/StdMeshers/StdMeshers_Distribution.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of point distribution algorithm // File : StdMeshers_Distribution.hxx // Author : Alexandre SOLOVYOV @@ -102,16 +103,16 @@ private: STDMESHERS_EXPORT bool buildDistribution( const Function& f, - const double start, const double end, - const int nbSeg, - std::vector& data, - const double eps ); + const double start, const double end, + const int nbSeg, + std::vector& data, + const double eps ); STDMESHERS_EXPORT bool buildDistribution( const TCollection_AsciiString& f, const int conv, const double start, const double end, - const int nbSeg, std::vector& data, const double eps ); + const int nbSeg, std::vector& data, const double eps ); STDMESHERS_EXPORT bool buildDistribution( const std::vector& f, const int conv, const double start, const double end, - const int nbSeg, std::vector& data, const double eps ); + const int nbSeg, std::vector& data, const double eps ); #endif diff --git a/src/StdMeshers/StdMeshers_FaceSide.cxx b/src/StdMeshers/StdMeshers_FaceSide.cxx index f34def734..3a8d36530 100644 --- a/src/StdMeshers/StdMeshers_FaceSide.cxx +++ b/src/StdMeshers/StdMeshers_FaceSide.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_FaceSide.hxx // Created : Wed Jan 31 18:41:25 2007 @@ -31,7 +32,7 @@ #include "SMDS_MeshNode.hxx" #include "SMESHDS_Mesh.hxx" #include "SMESHDS_SubMesh.hxx" -//#include "SMESH_Algo.hxx" +#include "SMESH_Algo.hxx" #include "SMESH_Mesh.hxx" #include "SMESH_MesherHelper.hxx" #include "SMESH_ComputeError.hxx" @@ -44,10 +45,14 @@ #include #include #include +#include #include #include #include +#include +#include + #include #include "utilities.h" @@ -87,9 +92,12 @@ StdMeshers_FaceSide::StdMeshers_FaceSide(const TopoDS_Face& theFace, int nbEdges = theEdges.size(); myEdge.resize( nbEdges ); myC2d.resize( nbEdges ); + myC3dAdaptor.resize( nbEdges ); myFirst.resize( nbEdges ); myLast.resize( nbEdges ); myNormPar.resize( nbEdges ); + myEdgeLength.resize( nbEdges ); + myIsUniform.resize( nbEdges, true ); myLength = 0; myNbPonits = myNbSegments = 0; myMesh = theMesh; @@ -99,16 +107,16 @@ StdMeshers_FaceSide::StdMeshers_FaceSide(const TopoDS_Face& theFace, if ( nbEdges == 0 ) return; SMESHDS_Mesh* meshDS = theMesh->GetMeshDS(); - vector len( nbEdges ); int nbDegen = 0; list::iterator edge = theEdges.begin(); + TopoDS_Iterator vExp; for ( int index = 0; edge != theEdges.end(); ++index, ++edge ) { int i = theIsForward ? index : nbEdges - index - 1; - len[i] = SMESH_Algo::EdgeLength( *edge ); - if ( len[i] < DBL_MIN ) nbDegen++; - myLength += len[i]; + myEdgeLength[i] = SMESH_Algo::EdgeLength( *edge ); + if ( myEdgeLength[i] < DBL_MIN ) nbDegen++; + myLength += myEdgeLength[i]; myEdge[i] = *edge; if ( !theIsForward ) myEdge[i].Reverse(); @@ -129,16 +137,41 @@ StdMeshers_FaceSide::StdMeshers_FaceSide(const TopoDS_Face& theFace, myNbPonits += nbN; myNbSegments += sm->NbElements(); } - if ( SMESH_Algo::VertexNode( TopExp::FirstVertex( *edge, 1), meshDS )) + // TopExp::FirstVertex() and TopExp::LastVertex() return NULL from INTERNAL edge + vExp.Initialize( *edge ); + if ( vExp.Value().Orientation() == TopAbs_REVERSED ) vExp.Next(); + if ( SMESH_Algo::VertexNode( TopoDS::Vertex( vExp.Value()), meshDS )) myNbPonits += 1; // for the first end else myMissingVertexNodes = true; - } - if ( SMESH_Algo::VertexNode( TopExp::LastVertex( theEdges.back(), 1), meshDS )) - myNbPonits++; // for the last end - else - myMissingVertexNodes = true; + // check if edge has non-uniform parametrization (issue 0020705) + if ( !myC2d[i].IsNull() && myEdgeLength[i] > DBL_MIN) + { + Geom2dAdaptor_Curve A2dC( myC2d[i] ); + double p2 = myFirst[i]+(myLast[i]-myFirst[i])/2., p4 = myFirst[i]+(myLast[i]-myFirst[i])/4.; + double d2 = GCPnts_AbscissaPoint::Length( A2dC, myFirst[i], p2 ); + double d4 = GCPnts_AbscissaPoint::Length( A2dC, myFirst[i], p4 ); + //cout<<"len = "<GetNodes(); + if ( u2nodeVec.empty() ) + while ( nItr->more() ) + { + const SMDS_MeshNode* node = nItr->next(); + if ( myIgnoreMediumNodes && SMESH_MeshEditor::IsMedium( node, SMDSAbs_Edge )) + continue; + double u = helper.GetNodeU( myEdge[i], node, 0, ¶mOK ); + + // paramSize is signed so orientation is taken into account + double normPar = prevNormPar + r * ( u - myFirst[i] ) / paramSize; + u2nodeVec.push_back( make_pair( normPar, node )); + } + u2node.insert( u2nodeVec.begin(), u2nodeVec.end() ); + + // Put 2nd vertex node for a last edge if ( i+1 == myEdge.size() ) { - node = SMESH_Algo::VertexNode( VLast, meshDS ); + node = SMESH_Algo::VertexNode( VV[1], meshDS ); if ( !node ) { MESSAGE(" NO NODE on VERTEX" ); return myPoints; } u2node.insert( make_pair( 1., node )); } - - // put internal nodes - SMESHDS_SubMesh* sm = meshDS->MeshElements( myEdge[i] ); - if ( !sm ) continue; - SMDS_NodeIteratorPtr nItr = sm->GetNodes(); - double paramSize = myLast[i] - myFirst[i], r = myNormPar[i] - prevNormPar; - while ( nItr->more() ) { - const SMDS_MeshNode* node = nItr->next(); - if ( myIgnoreMediumNodes && SMESH_MeshEditor::IsMedium( node, SMDSAbs_Edge )) - continue; - const SMDS_EdgePosition* epos = - static_cast(node->GetPosition()); - double u = epos->GetUParameter(); - // paramSize is signed so orientation is taken into account - double normPar = prevNormPar + r * ( u - myFirst[i] ) / paramSize; -#ifdef _DEBUG_ - if ( normPar > 1 || normPar < 0) { - dump("DEBUG"); - MESSAGE ( "WRONG normPar: "< 1 ) { reverse( myEdge ); reverse( myC2d ); + reverse( myC3dAdaptor ); reverse( myFirst ); reverse( myLast ); reverse( myNormPar ); + reverse( myEdgeLength ); + reverse( myIsUniform ); } myNormPar[nbEdges-1]=1.; myPoints.clear(); @@ -483,6 +539,7 @@ BRepAdaptor_CompCurve* StdMeshers_FaceSide::GetCurve3d() const return new BRepAdaptor_CompCurve( aWire ); } + //================================================================================ /*! * \brief Return 2D point by normalized parameter @@ -497,9 +554,22 @@ gp_Pnt2d StdMeshers_FaceSide::Value2d(double U) const int i = EdgeIndex( U ); double prevU = i ? myNormPar[ i-1 ] : 0; double r = ( U - prevU )/ ( myNormPar[ i ] - prevU ); - return myC2d[ i ]->Value( myFirst[i] * ( 1 - r ) + myLast[i] * r ); + + double par = myFirst[i] * ( 1 - r ) + myLast[i] * r; + + // check parametrization of curve + if( !myIsUniform[i] ) + { + double aLen3dU = r * myEdgeLength[i] * ( myFirst[i]>myLast[i] ? -1. : 1.); + GCPnts_AbscissaPoint AbPnt + ( const_cast( myC3dAdaptor[i]), aLen3dU, myFirst[i] ); + if( AbPnt.IsDone() ) { + par = AbPnt.Parameter(); + } + } + return myC2d[ i ]->Value(par); + } - //return gp_Pnt2d( 1e+100, 1e+100 ); return myDefaultPnt2d; } @@ -527,20 +597,28 @@ TSideVector StdMeshers_FaceSide::GetFaceWires(const TopoDS_Face& theFace, for ( int iW = 0; iW < nbWires; ++iW ) { std::advance( to, *nbE++ ); + if ( *nbE == 0 ) // Issue 0020676 + { + --nbWires; + --iW; + wires.resize( nbWires ); + continue; + } list< TopoDS_Edge > wireEdges( from, to ); // assure that there is a node on the first vertex // as StdMeshers_FaceSide::GetUVPtStruct() requires - while ( !SMESH_Algo::VertexNode( TopExp::FirstVertex( wireEdges.front(), true), - theMesh.GetMeshDS())) - { - wireEdges.splice(wireEdges.end(), wireEdges, - wireEdges.begin(), ++wireEdges.begin()); - if ( from->IsSame( wireEdges.front() )) { - theError = TError - ( new SMESH_ComputeError(COMPERR_BAD_INPUT_MESH,"No nodes on vertices")); - return TSideVector(0); + if ( wireEdges.front().Orientation() != TopAbs_INTERNAL ) // Issue 0020676 + while ( !SMESH_Algo::VertexNode( TopExp::FirstVertex( wireEdges.front(), true), + theMesh.GetMeshDS())) + { + wireEdges.splice(wireEdges.end(), wireEdges, + wireEdges.begin(), ++wireEdges.begin()); + if ( from->IsSame( wireEdges.front() )) { + theError = TError + ( new SMESH_ComputeError(COMPERR_BAD_INPUT_MESH,"No nodes on vertices")); + return TSideVector(0); + } } - } const bool isForward = true; StdMeshers_FaceSide* wire = new StdMeshers_FaceSide( theFace, wireEdges, &theMesh, isForward, theIgnoreMediumNodes); @@ -550,3 +628,42 @@ TSideVector StdMeshers_FaceSide::GetFaceWires(const TopoDS_Face& theFace, return wires; } +//================================================================================ +/*! + * \brief Return 1st vertex of the i-the edge + */ +//================================================================================ + +TopoDS_Vertex StdMeshers_FaceSide::FirstVertex(int i) const +{ + TopoDS_Vertex v; + if ( i < NbEdges() ) + { + v = myEdge[i].Orientation() <= TopAbs_REVERSED ? // FORWARD || REVERSED + TopExp::FirstVertex( myEdge[i], 1 ) : + TopoDS::Vertex( TopoDS_Iterator( myEdge[i] ).Value() ); + } + return v; +} + +//================================================================================ +/*! + * \brief Return last vertex of the i-the edge + */ +//================================================================================ + +TopoDS_Vertex StdMeshers_FaceSide::LastVertex(int i) const +{ + TopoDS_Vertex v; + if ( i < NbEdges() ) + { + const TopoDS_Edge& edge = i<0 ? myEdge[ NbEdges() + i ] : myEdge[i]; + if ( edge.Orientation() <= TopAbs_REVERSED ) // FORWARD || REVERSED + v = TopExp::LastVertex( edge, 1 ); + else + for ( TopoDS_Iterator vIt( edge ); vIt.More(); vIt.Next() ) + v = TopoDS::Vertex( vIt.Value() ); + } + return v; +} + diff --git a/src/StdMeshers/StdMeshers_FaceSide.hxx b/src/StdMeshers/StdMeshers_FaceSide.hxx index 8382a8fbd..69d3f87a8 100644 --- a/src/StdMeshers/StdMeshers_FaceSide.hxx +++ b/src/StdMeshers/StdMeshers_FaceSide.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_FaceSide.hxx // Created : Wed Jan 31 18:41:25 2007 @@ -28,14 +29,13 @@ #ifndef StdMeshers_FaceSide_HeaderFile #define StdMeshers_FaceSide_HeaderFile -#include +#include +#include #include #include -#include -#include +#include #include "SMESH_StdMeshers.hxx" -#include "SMESH_Algo.hxx" #include #include @@ -47,7 +47,7 @@ class Adaptor2d_Curve2d; class Adaptor3d_Curve; class BRepAdaptor_CompCurve; class TopoDS_Face; -class SMESH_ComputeError; +struct SMESH_ComputeError; typedef struct uvPtStruct { @@ -124,7 +124,7 @@ public: */ SMESH_Mesh* GetMesh() const { return myMesh; } /*! - * \brief Return true if there vertices without nodes + * \brief Return true if there are vertices without nodes */ bool MissVertexNode() const { return myMissingVertexNodes; } /*! @@ -170,11 +170,11 @@ public: /*! * \brief Return 1st vertex of the i-the edge (count starts from zero) */ - inline TopoDS_Vertex FirstVertex(int i=0) const; + TopoDS_Vertex FirstVertex(int i=0) const; /*! * \brief Return last vertex of the i-the edge (count starts from zero) */ - inline TopoDS_Vertex LastVertex(int i=-1) const; + TopoDS_Vertex LastVertex(int i=-1) const; /*! * \brief Return first normalized parameter of the i-the edge (count starts from zero) */ @@ -198,11 +198,16 @@ public: protected: + + // DON't FORGET tO update Reverse() when adding one more vector! std::vector myPoints, myFalsePoints; std::vector myEdge; std::vector myC2d; + std::vector myC3dAdaptor; std::vector myFirst, myLast; std::vector myNormPar; + std::vector myEdgeLength; + std::vector myIsUniform; double myLength; int myNbPonits, myNbSegments; SMESH_Mesh* myMesh; @@ -243,28 +248,6 @@ inline double StdMeshers_FaceSide::Parameter(double U, TopoDS_Edge & edge) const return myFirst[i] * ( 1 - r ) + myLast[i] * r; } -//================================================================================ -/*! - * \brief Return 1st vertex of the i-the edge - */ -//================================================================================ - -inline TopoDS_Vertex StdMeshers_FaceSide::FirstVertex(int i) const -{ - return i < myEdge.size() ? TopExp::FirstVertex( myEdge[i], 1 ) : TopoDS_Vertex(); -} - -//================================================================================ -/*! - * \brief Return last vertex of the i-the edge - */ -//================================================================================ - -inline TopoDS_Vertex StdMeshers_FaceSide::LastVertex(int i) const -{ - return i<0 ? TopExp::LastVertex( myEdge.back(), 1) : i 0 ) { for ( int i = 0; i < listSize; i++) save << " " << _nbsegs[i]; } listSize = _edgeIDs.size(); - save << listSize; + save << " " << listSize; if ( listSize > 0 ) { for ( int i = 0; i < listSize; i++) save << " " << _edgeIDs[i]; @@ -154,6 +152,7 @@ istream & StdMeshers_FixedPoints1D::LoadFrom(istream & load) isOK = (load >> intVal); if (isOK && intVal > 0) { + _params.clear(); _params.reserve( intVal ); for (int i = 0; i < _params.capacity() && isOK; i++) { isOK = (load >> dblVal); @@ -163,6 +162,7 @@ istream & StdMeshers_FixedPoints1D::LoadFrom(istream & load) isOK = (load >> intVal); if (isOK && intVal > 0) { + _nbsegs.clear(); _nbsegs.reserve( intVal ); for (int i = 0; i < _nbsegs.capacity() && isOK; i++) { isOK = (load >> intVal); @@ -172,6 +172,7 @@ istream & StdMeshers_FixedPoints1D::LoadFrom(istream & load) isOK = (load >> intVal); if (isOK && intVal > 0) { + _edgeIDs.clear(); _edgeIDs.reserve( intVal ); for (int i = 0; i < _edgeIDs.capacity() && isOK; i++) { isOK = (load >> intVal); diff --git a/src/StdMeshers/StdMeshers_FixedPoints1D.hxx b/src/StdMeshers/StdMeshers_FixedPoints1D.hxx index b5126e1c3..4d203e31d 100644 --- a/src/StdMeshers/StdMeshers_FixedPoints1D.hxx +++ b/src/StdMeshers/StdMeshers_FixedPoints1D.hxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_FixedPoints1D.hxx // Author : Damien COQUERET, OCC diff --git a/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cxx b/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cxx new file mode 100644 index 000000000..28b628c5c --- /dev/null +++ b/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cxx @@ -0,0 +1,1071 @@ +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. +// +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. +// +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +// + +// File : StdMeshers_HexaFromSkin_3D.cxx +// Created : Wed Jan 27 12:28:07 2010 +// Author : Edward AGAPOV (eap) +// +#include "StdMeshers_HexaFromSkin_3D.hxx" + +#include "SMDS_VolumeOfNodes.hxx" +#include "SMDS_VolumeTool.hxx" +#include "SMESH_Block.hxx" +#include "SMESH_MesherHelper.hxx" + +#include + +//#include "utilities.h" + +// Define error message +#ifdef _DEBUG_ +#define BAD_MESH_ERR \ + error(SMESH_Comment("Can't detect block-wise structure of the input 2D mesh.\n" \ + __FILE__ ":" )<<__LINE__) +#else +#define BAD_MESH_ERR \ + error(SMESH_Comment("Can't detect block-wise structure of the input 2D mesh")) +#endif + +// Debug output +#define _DUMP_(msg) //cout << msg << endl + + + +namespace +{ + enum EBoxSides //!< sides of the block + { + B_BOTTOM=0, B_RIGHT, B_TOP, B_LEFT, B_FRONT, B_BACK, B_UNDEFINED + }; + const char* SBoxSides[] = //!< names of block sides + { + "BOTTOM", "RIGHT", "TOP", "LEFT", "FRONT", "BACK", "UNDEFINED" + }; + enum EQuadEdge //!< edges of quadrangle side + { + Q_BOTTOM, Q_RIGHT, Q_TOP, Q_LEFT, Q_UNDEFINED + }; + + + //================================================================================ + /*! + * \brief return logical coordinates (i.e. min or max) of ends of edge + */ + //================================================================================ + + bool getEdgeEnds(EQuadEdge edge, bool& xMax1, bool& yMax1, bool& xMax2, bool& yMax2 ) + { + xMax1=0, yMax1=0, xMax2=1, yMax2=1; + switch( edge ) + { + case Q_BOTTOM: yMax2 = 0; break; + case Q_RIGHT: xMax1 = 1; break; + case Q_TOP: yMax1 = 1; break; + case Q_LEFT: xMax2 = 0; break; + default: + return false; + } + return true; + } + + //================================================================================ + /*! + * \brief return true if a node is at block corner + */ + //================================================================================ + + bool isCornerNode( const SMDS_MeshNode* n ) + { + return n && n->NbInverseElements( SMDSAbs_Face ) % 2; + } + + //================================================================================ + /*! + * \brief check element type + */ + //================================================================================ + + bool isQuadrangle(const SMDS_MeshElement* e) + { + return ( e && e->NbNodes() == ( e->IsQuadratic() ? 8 : 4 )); + } + + //================================================================================ + /*! + * \brief return opposite node of a quadrangle face + */ + //================================================================================ + + const SMDS_MeshNode* oppositeNode(const SMDS_MeshElement* quad, int iNode) + { + return quad->GetNode( (iNode+2) % 4 ); + } + + //================================================================================ + /*! + * \brief Convertor of a pair of integers to a sole index + */ + struct _Indexer + { + int _xSize, _ySize; + _Indexer( int xSize=0, int ySize=0 ): _xSize(xSize), _ySize(ySize) {} + int size() const { return _xSize * _ySize; } + int operator()(int x, int y) const { return y * _xSize + x; } + }; + //================================================================================ + /*! + * \brief Oriented convertor of a pair of integers to a sole index + */ + class _OrientedIndexer : public _Indexer + { + public: + enum OriFlags //!< types of block side orientation + { + REV_X = 1, REV_Y = 2, SWAP_XY = 4, MAX_ORI = REV_X|REV_Y|SWAP_XY + }; + _OrientedIndexer( const _Indexer& indexer, const int oriFlags ): + _Indexer( indexer._xSize, indexer._ySize ), + _xSize (indexer._xSize), _ySize(indexer._ySize), + _xRevFun((oriFlags & REV_X) ? & reverse : & lazy), + _yRevFun((oriFlags & REV_Y) ? & reverse : & lazy), + _swapFun((oriFlags & SWAP_XY ) ? & swap : & lazy) + { + (*_swapFun)( _xSize, _ySize ); + } + //!< Return index by XY + int operator()(int x, int y) const + { + (*_xRevFun)( x, const_cast( _xSize )); + (*_yRevFun)( y, const_cast( _ySize )); + (*_swapFun)( x, y ); + return _Indexer::operator()(x,y); + } + //!< Return index for a corner + int corner(bool xMax, bool yMax) const + { + int x = xMax, y = yMax, size = 2; + (*_xRevFun)( x, size ); + (*_yRevFun)( y, size ); + (*_swapFun)( x, y ); + return _Indexer::operator()(x ? _Indexer::_xSize-1 : 0 , y ? _Indexer::_ySize-1 : 0); + } + int xSize() const { return _xSize; } + int ySize() const { return _ySize; } + private: + _Indexer _indexer; + int _xSize, _ySize; + + typedef void (*TFun)(int& x, int& y); + TFun _xRevFun, _yRevFun, _swapFun; + + static void lazy(int&, int&) {} + static void reverse(int& x, int& size) { x = size - x - 1; } + static void swap(int& x, int& y) { std::swap(x,y); } + }; + //================================================================================ + /*! + * \brief Structure corresponding to the meshed side of block + */ + struct _BlockSide + { + vector _grid; + _Indexer _index; + int _nbBlocksExpected; + int _nbBlocksFound; + +#ifdef _DEBUG_ +#define _grid_access_(args) _grid.at( args ) +#else +#define _grid_access_(args) _grid[ args ] +#endif + //!< Return node at XY + const SMDS_MeshNode* getNode(int x, int y) const { return _grid_access_( _index( x, y )); } + //!< Set node at XY + void setNode(int x, int y, const SMDS_MeshNode* n) { _grid_access_( _index( x, y )) = n; } + //!< Return an edge + SMESH_OrientedLink getEdge(EQuadEdge edge) const + { + bool x1, y1, x2, y2; getEdgeEnds( edge, x1, y1, x2, y2 ); + return SMESH_OrientedLink( getCornerNode ( x1, y1 ), getCornerNode( x2, y2 )); + } + //!< Return a corner node + const SMDS_MeshNode* getCornerNode(bool isXMax, bool isYMax) const + { + return getNode( isXMax ? _index._xSize-1 : 0 , isYMax ? _index._ySize-1 : 0 ); + } + const SMDS_MeshElement* getCornerFace(const SMDS_MeshNode* cornerNode) const; + //!< True if all blocks this side belongs to have beem found + bool isBound() const { return _nbBlocksExpected <= _nbBlocksFound; } + //!< Return coordinates of node at XY + gp_XYZ getXYZ(int x, int y) const { return SMESH_MeshEditor::TNodeXYZ( getNode( x, y )); } + //!< Return gravity center of the four corners and the middle node + gp_XYZ getGC() const + { + gp_XYZ xyz = + getXYZ( 0, 0 ) + + getXYZ( _index._xSize-1, 0 ) + + getXYZ( 0, _index._ySize-1 ) + + getXYZ( _index._xSize-1, _index._ySize-1 ) + + getXYZ( _index._xSize/2, _index._ySize/2 ); + return xyz / 5; + } + //!< Return number of mesh faces + int getNbFaces() const { return (_index._xSize-1) * (_index._ySize-1); } + }; + //================================================================================ + /*! + * \brief _BlockSide with changed orientation + */ + struct _OrientedBlockSide + { + _BlockSide* _side; + _OrientedIndexer _index; + + _OrientedBlockSide( _BlockSide* side=0, const int oriFlags=0 ): + _side(side), _index(side ? side->_index : _Indexer(), oriFlags ) {} + //!< return coordinates by XY + gp_XYZ xyz(int x, int y) const + { + return SMESH_MeshEditor::TNodeXYZ( _side->_grid_access_( _index( x, y )) ); + } + //!< safely return a node by XY + const SMDS_MeshNode* node(int x, int y) const + { + int i = _index( x, y ); + return ( i < 0 || i >= _side->_grid.size()) ? 0 : _side->_grid[i]; + } + //!< Return an edge + SMESH_OrientedLink edge(EQuadEdge edge) const + { + bool x1, y1, x2, y2; getEdgeEnds( edge, x1, y1, x2, y2 ); + return SMESH_OrientedLink( cornerNode ( x1, y1 ), cornerNode( x2, y2 )); + } + //!< Return a corner node + const SMDS_MeshNode* cornerNode(bool isXMax, bool isYMax) const + { + return _side->_grid_access_( _index.corner( isXMax, isYMax )); + } + //!< return its size in nodes + int getHoriSize() const { return _index.xSize(); } + int getVertSize() const { return _index.ySize(); } + //!< True if _side has been initialized + operator bool() const { return _side; } + //! Direct access to _side + const _BlockSide* operator->() const { return _side; } + _BlockSide* operator->() { return _side; } + }; + //================================================================================ + /*! + * \brief Meshed skin of block + */ + struct _Block + { + _OrientedBlockSide _side[6]; // 6 sides of a sub-block + + const _OrientedBlockSide& getSide(int i) const { return _side[i]; } + bool hasSide( const _OrientedBlockSide& s) const + { + if ( s ) for (int i=0;i<6;++i) if ( _side[i] && _side[i]._side == s._side ) return true; + return false; + } + }; + //================================================================================ + /*! + * \brief Skin mesh possibly containing several meshed blocks + */ + class _Skin + { + public: + + int findBlocks(SMESH_Mesh& mesh); + //!< return i-th block + const _Block& getBlock(int i) const { return _blocks[i]; } + //!< return error description + const SMESH_Comment& error() const { return _error; } + + private: + bool fillSide( _BlockSide& side, const SMDS_MeshElement* cornerQuad); + bool fillRowsUntilCorner(const SMDS_MeshElement* quad, + const SMDS_MeshNode* n1, + const SMDS_MeshNode* n2, + vector& verRow1, + vector& verRow2, + bool alongN1N2 ); + _OrientedBlockSide findBlockSide( EBoxSides startBlockSide, + EQuadEdge sharedSideEdge1, + EQuadEdge sharedSideEdge2); + //!< update own data and data of the side bound to block + void setSideBoundToBlock( _BlockSide& side ) + { + side._nbBlocksFound++; + if ( side.isBound() ) + { + for ( int e = 0; e < int(Q_UNDEFINED); ++e ) + _edge2sides[ side.getEdge( (EQuadEdge) e ) ].erase( &side ); + } + } + //!< store reason of error + int error(const SMESH_Comment& reason) { _error = reason; return 0; } + + SMESH_Comment _error; + + list< _BlockSide > _allSides; + vector< _Block > _blocks; + + //map< const SMDS_MeshNode*, set< _BlockSide* > > _corner2sides; + map< SMESH_OrientedLink, set< _BlockSide* > > _edge2sides; + }; + + //================================================================================ + /*! + * \brief Find and return number of submeshes corresponding to blocks + */ + //================================================================================ + + int _Skin::findBlocks(SMESH_Mesh& mesh) + { + SMESHDS_Mesh* meshDS = mesh.GetMeshDS(); + + // Find a node at any block corner + + SMDS_NodeIteratorPtr nIt = meshDS->nodesIterator(/*idInceasingOrder=*/true); + if ( !nIt->more() ) return error("Empty mesh"); + + const SMDS_MeshNode* nCorner = 0; + while ( nIt->more() ) + { + nCorner = nIt->next(); + if ( isCornerNode( nCorner )) + break; + else + nCorner = 0; + } + if ( !nCorner ) + return BAD_MESH_ERR; + + // -------------------------------------------------------------------- + // Find all block sides starting from mesh faces sharing the corner node + // -------------------------------------------------------------------- + + int nbFacesOnSides = 0; + TIDSortedElemSet cornerFaces; // corner faces of found _BlockSide's + list< const SMDS_MeshNode* > corners( 1, nCorner ); + list< const SMDS_MeshNode* >::iterator corner = corners.begin(); + while ( corner != corners.end() ) + { + SMDS_ElemIteratorPtr faceIt = (*corner)->GetInverseElementIterator( SMDSAbs_Face ); + while ( faceIt->more() ) + { + const SMDS_MeshElement* face = faceIt->next(); + if ( !cornerFaces.insert( face ).second ) + continue; // already loaded block side + + if ( !isQuadrangle( face )) + return error("Non-quadrangle elements in the input mesh"); + + if ( _allSides.empty() || !_allSides.back()._grid.empty() ) + _allSides.push_back( _BlockSide() ); + + _BlockSide& side = _allSides.back(); + if ( !fillSide( side, face ) ) + { + if ( !_error.empty() ) + return false; + } + else + { + for ( int isXMax = 0; isXMax < 2; ++isXMax ) + for ( int isYMax = 0; isYMax < 2; ++isYMax ) + { + const SMDS_MeshNode* nCorner = side.getCornerNode(isXMax,isYMax ); + if ( !isCornerNode( nCorner )) + return BAD_MESH_ERR; + //_corner2sides[ nCorner ].insert( &side ); + corners.push_back( nCorner ); + cornerFaces.insert( side.getCornerFace( nCorner )); + } + for ( int e = 0; e < int(Q_UNDEFINED); ++e ) + _edge2sides[ side.getEdge( (EQuadEdge) e ) ].insert( &side ); + + nbFacesOnSides += side.getNbFaces(); + } + } + ++corner; + + // find block sides of other domains if any + if ( corner == corners.end() && nbFacesOnSides < mesh.NbQuadrangles() ) + { + while ( nIt->more() ) + { + nCorner = nIt->next(); + if ( isCornerNode( nCorner )) + corner = corners.insert( corner, nCorner ); + } + nbFacesOnSides = mesh.NbQuadrangles(); + } + } + + if ( _allSides.empty() ) + return BAD_MESH_ERR; + if ( _allSides.back()._grid.empty() ) + _allSides.pop_back(); + + // --------------------------- + // Organize sides into blocks + // --------------------------- + + // analyse sharing of sides by blocks + int nbBlockSides = 0; // nb of block sides taking into account their sharing + list < _BlockSide >::iterator sideIt = _allSides.begin(); + for ( ; sideIt != _allSides.end(); ++sideIt ) + { + _BlockSide& side = *sideIt; + bool isSharedSide = true; + for ( int e = 0; e < int(Q_UNDEFINED) && isSharedSide; ++e ) + isSharedSide = _edge2sides[ side.getEdge( (EQuadEdge) e ) ].size() > 2; + side._nbBlocksFound = 0; + side._nbBlocksExpected = isSharedSide ? 2 : 1; + nbBlockSides += side._nbBlocksExpected; + } + + // find sides of each block + int nbBlocks = 0; + while ( nbBlockSides >= 6 ) + { + // get any side not bound to all blocks it belongs to + sideIt = _allSides.begin(); + while ( sideIt != _allSides.end() && sideIt->isBound()) + ++sideIt; + + // start searching for block sides from the got side + bool ok = true; + if ( _blocks.empty() || _blocks.back()._side[B_FRONT] ) + _blocks.resize( _blocks.size() + 1 ); + + _Block& block = _blocks.back(); + block._side[B_FRONT] = &(*sideIt); + setSideBoundToBlock( *sideIt ); + nbBlockSides--; + + // edges of neighbour sides of B_FRONT corresponding to front's edges + EQuadEdge edgeOfFront[4] = { Q_BOTTOM, Q_RIGHT, Q_TOP, Q_LEFT }; + EQuadEdge edgeToFind [4] = { Q_BOTTOM, Q_LEFT, Q_BOTTOM, Q_LEFT }; + for ( int i = Q_BOTTOM; ok && i <= Q_LEFT; ++i ) + ok = ( block._side[i] = findBlockSide( B_FRONT, edgeOfFront[i], edgeToFind[i])); + if ( ok ) + ok = ( block._side[B_BACK] = findBlockSide( B_TOP, Q_TOP, Q_TOP )); + + if ( ok ) + { + // check if just found block is same as one of previously found + bool isSame = false; + for ( int i = 1; i < _blocks.size() && !isSame; ++i ) + { + _Block& prevBlock = _blocks[i-1]; + isSame = true; + for ( int j = 0; j < 6 && isSame; ++j ) + isSame = prevBlock.hasSide( block._side[ j ]); + } + ok = !isSame; + } + + // count the found sides + _DUMP_(endl); + for (int i = 0; i < B_UNDEFINED; ++i ) + { + _DUMP_("** Block side "<< SBoxSides[i] <<" "<< block._side[ i ]._side); + if ( block._side[ i ] ) + { + if ( ok && i != B_FRONT) + { + setSideBoundToBlock( *block._side[ i ]._side ); + nbBlockSides--; + } + _DUMP_("Corner 0,0 "<< block._side[ i ].cornerNode(0,0)); + _DUMP_("Corner 1,0 "<< block._side[ i ].cornerNode(1,0)); + _DUMP_("Corner 1,1 "<< block._side[ i ].cornerNode(1,1)); + _DUMP_("Corner 0,1 "<< block._side[ i ].cornerNode(0,1)); + } + else + { + _DUMP_("Not found"<GetNode(i))) + nCorner = firstQuad->GetNode(i); + if ( !nCorner ) return false; + + // get a node on block edge + int iCorner = firstQuad->GetNodeIndex( nCorner ); + const SMDS_MeshNode* nOnEdge = firstQuad->GetNode( (iCorner+1) % 4); + + // find out size of block side + vector horRow1, horRow2, verRow1, verRow2; + if ( !fillRowsUntilCorner( firstQuad, nCorner, nOnEdge, horRow1, horRow2, true ) || + !fillRowsUntilCorner( firstQuad, nCorner, nOnEdge, verRow1, verRow2, false )) + return false; + nbX = horRow1.size(), nbY = verRow1.size(); + + // store found nodes + side._index._xSize = horRow1.size(); + side._index._ySize = verRow1.size(); + side._grid.resize( side._index.size(), NULL ); + + for ( x = 0; x < horRow1.size(); ++x ) + { + side.setNode( x, 0, horRow1[x] ); + side.setNode( x, 1, horRow2[x] ); + } + for ( y = 0; y < verRow1.size(); ++y ) + { + side.setNode( 0, y, verRow1[y] ); + side.setNode( 1, y, verRow2[y] ); + } + } + // Find the rest nodes + + y = 1; // y of the row to fill + TIDSortedElemSet emptySet, avoidSet; + while ( ++y < nbY ) + { + // get next firstQuad in the next row of quadrangles + // + // n2up + // o---o <- y row + // | | + // o---o o o o o <- found nodes + //n1down n2down + // + int i1down, i2down, i2up; + const SMDS_MeshNode* n1down = side.getNode( 0, y-1 ); + const SMDS_MeshNode* n2down = side.getNode( 1, y-1 ); + avoidSet.clear(); avoidSet.insert( firstQuad ); + firstQuad = SMESH_MeshEditor::FindFaceInSet( n1down, n2down, emptySet, avoidSet, + &i1down, &i2down); + if ( !isQuadrangle( firstQuad )) + return BAD_MESH_ERR; + + const SMDS_MeshNode* n2up = oppositeNode( firstQuad, i1down ); + avoidSet.clear(); avoidSet.insert( firstQuad ); + + // find the rest nodes in the y-th row by faces in the row + + x = 1; + while ( ++x < nbX ) + { + const SMDS_MeshElement* quad = SMESH_MeshEditor::FindFaceInSet( n2up, n2down, emptySet, + avoidSet, &i2up, &i2down); + if ( !isQuadrangle( quad )) + return BAD_MESH_ERR; + + n2up = oppositeNode( quad, i2down ); + n2down = oppositeNode( quad, i2up ); + avoidSet.clear(); avoidSet.insert( quad ); + + side.setNode( x, y, n2up ); + } + } + + return true; + } + + //================================================================================ + /*! + * \brief Try to find a block side adjacent to the given side by given edge + */ + //================================================================================ + + _OrientedBlockSide _Skin::findBlockSide( EBoxSides startBlockSide, + EQuadEdge sharedSideEdge1, + EQuadEdge sharedSideEdge2) + { + _Block& block = _blocks.back(); + _OrientedBlockSide& side1 = block._side[ startBlockSide ]; + + // get corner nodes of the given block edge + SMESH_OrientedLink edge = side1.edge( sharedSideEdge1 ); + const SMDS_MeshNode* n1 = edge.node1(); + const SMDS_MeshNode* n2 = edge.node2(); + if ( edge._reversed ) swap( n1, n2 ); + + // find all sides sharing both nodes n1 and n2 + set< _BlockSide* > sidesOnEdge = _edge2sides[ edge ]; // copy a set + + // exclude loaded sides of block from sidesOnEdge + int nbLoadedSides = 0; + for (int i = 0; i < B_UNDEFINED; ++i ) + { + if ( block._side[ i ] ) + { + nbLoadedSides++; + sidesOnEdge.erase( block._side[ i ]._side ); + } + } + int nbSidesOnEdge = sidesOnEdge.size(); + _DUMP_("nbSidesOnEdge "<< nbSidesOnEdge << " " << n1->GetID() << "-" << n2->GetID() ); + if ( nbSidesOnEdge == 0 ) + return 0; + + _BlockSide* foundSide = 0; + if ( nbSidesOnEdge == 1 /*|| nbSidesOnEdge == 2 && nbLoadedSides == 1 */) + { + foundSide = *sidesOnEdge.begin(); + } + else + { + // Select one of found sides most close to startBlockSide + + // gravity center of already loaded block sides + gp_XYZ gc(0,0,0); + for (int i = 0; i < B_UNDEFINED; ++i ) + if ( block._side[ i ] ) + gc += block._side[ i ]._side->getGC(); + gc /= nbLoadedSides; + + gp_XYZ p1 ( n1->X(),n1->Y(),n1->Z()), p2 (n2->X(),n2->Y(),n2->Z()); + gp_Vec p1p2( p1, p2 ); + + const SMDS_MeshElement* face1 = side1->getCornerFace( n1 ); + gp_XYZ p1Op = SMESH_MeshEditor::TNodeXYZ( oppositeNode( face1, face1->GetNodeIndex(n1))); + gp_Vec side1Dir( p1, p1Op ); + gp_Ax2 pln( p1, p1p2, side1Dir ); // plane with normal p1p2 and X dir side1Dir + _DUMP_(" Select adjacent for "<< side1._side << " - side dir (" + << side1Dir.X() << ", " << side1Dir.Y() << ", " << side1Dir.Z() << ")" ); + + map < double , _BlockSide* > angleOfSide; + set< _BlockSide* >::iterator sideIt = sidesOnEdge.begin(); + for (; sideIt != sidesOnEdge.end(); ++sideIt ) + { + _BlockSide* sideI = *sideIt; + const SMDS_MeshElement* faceI = sideI->getCornerFace( n1 ); + gp_XYZ p1Op = SMESH_MeshEditor::TNodeXYZ( oppositeNode( faceI, faceI->GetNodeIndex(n1))); + gp_Vec sideIDir( p1, p1Op ); + // compute angle of (sideIDir projection to pln) and (X dir of pln) + gp_Vec2d sideIDirProj( sideIDir * pln.XDirection(), sideIDir * pln.YDirection()); + double angle = sideIDirProj.Angle( gp::DX2d() ); + if ( angle < 0 ) angle += 2 * PI; + angleOfSide.insert( make_pair( angle, sideI )); + _DUMP_(" "<< sideI << " - side dir (" + << sideIDir.X() << ", " << sideIDir.Y() << ", " << sideIDir.Z() << ")" + << " angle " << angle); + } + gp_Vec gcDir( p1, gc ); + gp_Vec2d gcDirProj( gcDir * pln.XDirection(), gcDir * pln.YDirection()); + double gcAngle = gcDirProj.Angle( gp::DX2d() ); + foundSide = gcAngle < 0 ? angleOfSide.rbegin()->second : angleOfSide.begin()->second; + _DUMP_(" selected "<< foundSide ); + } + + // Orient the found side correctly + + // corners of found side corresponding to nodes n1 and n2 + bool xMax1, yMax1, xMax2, yMax2; + if ( !getEdgeEnds( sharedSideEdge2, xMax1, yMax1, xMax2, yMax2 )) + return error(SMESH_Comment("Internal error at ")<<__FILE__<<":"<<__LINE__), + _OrientedBlockSide(0); + + for ( int ori = 0; ori < _OrientedIndexer::MAX_ORI+1; ++ori ) + { + _OrientedBlockSide orientedSide( foundSide, ori ); + const SMDS_MeshNode* n12 = orientedSide.cornerNode( xMax1, yMax1); + const SMDS_MeshNode* n22 = orientedSide.cornerNode( xMax2, yMax2); + if ( n1 == n12 && n2 == n22 ) + return orientedSide; + } + error(SMESH_Comment("Failed to orient a block side found by edge ")<& row1, + vector& row2, + const bool alongN1N2 ) + { + const SMDS_MeshNode* corner1 = n1; + + // Store nodes of quad in the rows and find new n1 and n2 to get + // the next face so that new n2 is on block edge + int i1 = quad->GetNodeIndex( n1 ); + int i2 = quad->GetNodeIndex( n2 ); + row1.clear(); row2.clear(); + row1.push_back( n1 ); + if ( alongN1N2 ) + { + row1.push_back( n2 ); + row2.push_back( oppositeNode( quad, i2 )); + row2.push_back( n1 = oppositeNode( quad, i1 )); + } + else + { + row2.push_back( n2 ); + row1.push_back( n2 = oppositeNode( quad, i2 )); + row2.push_back( n1 = oppositeNode( quad, i1 )); + } + + // Find the rest nodes + TIDSortedElemSet emptySet, avoidSet; + while ( !isCornerNode( n2 )) + { + avoidSet.clear(); avoidSet.insert( quad ); + quad = SMESH_MeshEditor::FindFaceInSet( n1, n2, emptySet, avoidSet, &i1, &i2 ); + if ( !isQuadrangle( quad )) + return BAD_MESH_ERR; + + row1.push_back( n2 = oppositeNode( quad, i1 )); + row2.push_back( n1 = oppositeNode( quad, i2 )); + } + return n1 != corner1; + } + + //================================================================================ + /*! + * \brief Return a corner face by a corner node + */ + //================================================================================ + + const SMDS_MeshElement* _BlockSide::getCornerFace(const SMDS_MeshNode* cornerNode) const + { + int x, y, isXMax, isYMax, found = 0; + for ( isXMax = 0; isXMax < 2; ++isXMax ) + { + for ( isYMax = 0; isYMax < 2; ++isYMax ) + { + x = isXMax ? _index._xSize-1 : 0; + y = isYMax ? _index._ySize-1 : 0; + found = ( getNode(x,y) == cornerNode ); + if ( found ) break; + } + if ( found ) break; + } + if ( !found ) return 0; + int dx = isXMax ? -1 : +1; + int dy = isYMax ? -1 : +1; + const SMDS_MeshNode* n1 = getNode(x,y); + const SMDS_MeshNode* n2 = getNode(x+dx,y); + const SMDS_MeshNode* n3 = getNode(x,y+dy); + const SMDS_MeshNode* n4 = getNode(x+dx,y+dy); + return SMDS_Mesh::FindFace(n1, n2, n3, n4 ); + } + +} + +//======================================================================= +//function : StdMeshers_HexaFromSkin_3D +//purpose : +//======================================================================= + +StdMeshers_HexaFromSkin_3D::StdMeshers_HexaFromSkin_3D(int hypId, int studyId, SMESH_Gen* gen) + :SMESH_3D_Algo(hypId, studyId, gen) +{ + MESSAGE("StdMeshers_HexaFromSkin_3D::StdMeshers_HexaFromSkin_3D"); + _name = "HexaFromSkin_3D"; +} + +StdMeshers_HexaFromSkin_3D::~StdMeshers_HexaFromSkin_3D() +{ + MESSAGE("StdMeshers_HexaFromSkin_3D::~StdMeshers_HexaFromSkin_3D"); +} + +//================================================================================ +/*! + * \brief Main method, which generates hexaheda + */ +//================================================================================ + +bool StdMeshers_HexaFromSkin_3D::Compute(SMESH_Mesh & aMesh, SMESH_MesherHelper* aHelper) +{ + _Skin skin; + int nbBlocks = skin.findBlocks(aMesh); + if ( nbBlocks == 0 ) + return error( skin.error()); + + vector< vector< const SMDS_MeshNode* > > columns; + int x, xSize, y, ySize, z, zSize; + _Indexer colIndex; + + for ( int i = 0; i < nbBlocks; ++i ) + { + const _Block& block = skin.getBlock( i ); + + // ------------------------------------------ + // Fill columns of nodes with existing nodes + // ------------------------------------------ + + xSize = block.getSide(B_BOTTOM).getHoriSize(); + ySize = block.getSide(B_BOTTOM).getVertSize(); + zSize = block.getSide(B_FRONT ).getVertSize(); + int X = xSize - 1, Y = ySize - 1, Z = zSize - 1; + colIndex = _Indexer( xSize, ySize ); + columns.resize( colIndex.size() ); + + // fill node columns by front and back box sides + for ( x = 0; x < xSize; ++x ) { + vector< const SMDS_MeshNode* >& column0 = columns[ colIndex( x, 0 )]; + vector< const SMDS_MeshNode* >& column1 = columns[ colIndex( x, Y )]; + column0.resize( zSize ); + column1.resize( zSize ); + for ( z = 0; z < zSize; ++z ) { + column0[ z ] = block.getSide(B_FRONT).node( x, z ); + column1[ z ] = block.getSide(B_BACK) .node( x, z ); + } + } + // fill node columns by left and right box sides + for ( y = 1; y < ySize-1; ++y ) { + vector< const SMDS_MeshNode* >& column0 = columns[ colIndex( 0, y )]; + vector< const SMDS_MeshNode* >& column1 = columns[ colIndex( X, y )]; + column0.resize( zSize ); + column1.resize( zSize ); + for ( z = 0; z < zSize; ++z ) { + column0[ z ] = block.getSide(B_LEFT) .node( y, z ); + column1[ z ] = block.getSide(B_RIGHT).node( y, z ); + } + } + // get nodes from top and bottom box sides + for ( x = 1; x < xSize-1; ++x ) { + for ( y = 1; y < ySize-1; ++y ) { + vector< const SMDS_MeshNode* >& column = columns[ colIndex( x, y )]; + column.resize( zSize ); + column.front() = block.getSide(B_BOTTOM).node( x, y ); + column.back() = block.getSide(B_TOP) .node( x, y ); + } + } + + // ---------------------------- + // Add internal nodes of a box + // ---------------------------- + // projection points of internal nodes on box subshapes by which + // coordinates of internal nodes are computed + vector pointOnShape( SMESH_Block::ID_Shell ); + + // projections on vertices are constant + pointOnShape[ SMESH_Block::ID_V000 ] = block.getSide(B_BOTTOM).xyz( 0, 0 ); + pointOnShape[ SMESH_Block::ID_V100 ] = block.getSide(B_BOTTOM).xyz( X, 0 ); + pointOnShape[ SMESH_Block::ID_V010 ] = block.getSide(B_BOTTOM).xyz( 0, Y ); + pointOnShape[ SMESH_Block::ID_V110 ] = block.getSide(B_BOTTOM).xyz( X, Y ); + pointOnShape[ SMESH_Block::ID_V001 ] = block.getSide(B_TOP).xyz( 0, 0 ); + pointOnShape[ SMESH_Block::ID_V101 ] = block.getSide(B_TOP).xyz( X, 0 ); + pointOnShape[ SMESH_Block::ID_V011 ] = block.getSide(B_TOP).xyz( 0, Y ); + pointOnShape[ SMESH_Block::ID_V111 ] = block.getSide(B_TOP).xyz( X, Y ); + + for ( x = 1; x < xSize-1; ++x ) + { + gp_XYZ params; // normalized parameters of internal node within a unit box + params.SetCoord( 1, x / double(X) ); + for ( y = 1; y < ySize-1; ++y ) + { + params.SetCoord( 2, y / double(Y) ); + // column to fill during z loop + vector< const SMDS_MeshNode* >& column = columns[ colIndex( x, y )]; + // projections on horizontal edges + pointOnShape[ SMESH_Block::ID_Ex00 ] = block.getSide(B_BOTTOM).xyz( x, 0 ); + pointOnShape[ SMESH_Block::ID_Ex10 ] = block.getSide(B_BOTTOM).xyz( x, Y ); + pointOnShape[ SMESH_Block::ID_E0y0 ] = block.getSide(B_BOTTOM).xyz( 0, y ); + pointOnShape[ SMESH_Block::ID_E1y0 ] = block.getSide(B_BOTTOM).xyz( X, y ); + pointOnShape[ SMESH_Block::ID_Ex01 ] = block.getSide(B_TOP).xyz( x, 0 ); + pointOnShape[ SMESH_Block::ID_Ex11 ] = block.getSide(B_TOP).xyz( x, Y ); + pointOnShape[ SMESH_Block::ID_E0y1 ] = block.getSide(B_TOP).xyz( 0, y ); + pointOnShape[ SMESH_Block::ID_E1y1 ] = block.getSide(B_TOP).xyz( X, y ); + // projections on horizontal sides + pointOnShape[ SMESH_Block::ID_Fxy0 ] = block.getSide(B_BOTTOM).xyz( x, y ); + pointOnShape[ SMESH_Block::ID_Fxy1 ] = block.getSide(B_TOP) .xyz( x, y ); + for ( z = 1; z < zSize-1; ++z ) // z loop + { + params.SetCoord( 3, z / double(Z) ); + // projections on vertical edges + pointOnShape[ SMESH_Block::ID_E00z ] = block.getSide(B_FRONT).xyz( 0, z ); + pointOnShape[ SMESH_Block::ID_E10z ] = block.getSide(B_FRONT).xyz( X, z ); + pointOnShape[ SMESH_Block::ID_E01z ] = block.getSide(B_BACK).xyz( 0, z ); + pointOnShape[ SMESH_Block::ID_E11z ] = block.getSide(B_BACK).xyz( X, z ); + // projections on vertical sides + pointOnShape[ SMESH_Block::ID_Fx0z ] = block.getSide(B_FRONT).xyz( x, z ); + pointOnShape[ SMESH_Block::ID_Fx1z ] = block.getSide(B_BACK) .xyz( x, z ); + pointOnShape[ SMESH_Block::ID_F0yz ] = block.getSide(B_LEFT) .xyz( y, z ); + pointOnShape[ SMESH_Block::ID_F1yz ] = block.getSide(B_RIGHT).xyz( y, z ); + + // compute internal node coordinates + gp_XYZ coords; + SMESH_Block::ShellPoint( params, pointOnShape, coords ); + column[ z ] = aHelper->AddNode( coords.X(), coords.Y(), coords.Z() ); + +#ifdef DEB_GRID + // debug + //cout << "----------------------------------------------------------------------"<& col00 = columns[ colIndex( x, y )]; + vector< const SMDS_MeshNode* >& col10 = columns[ colIndex( x+1, y )]; + vector< const SMDS_MeshNode* >& col01 = columns[ colIndex( x, y+1 )]; + vector< const SMDS_MeshNode* >& col11 = columns[ colIndex( x+1, y+1 )]; + // bottom face normal of a hexa mush point outside the volume + if ( isForw ) + for ( z = 0; z < zSize-1; ++z ) + aHelper->AddVolume(col00[z], col01[z], col11[z], col10[z], + col00[z+1], col01[z+1], col11[z+1], col10[z+1]); + else + for ( z = 0; z < zSize-1; ++z ) + aHelper->AddVolume(col00[z], col10[z], col11[z], col01[z], + col00[z+1], col10[z+1], col11[z+1], col01[z+1]); + } + } + } // loop on blocks + + return true; +} + +//================================================================================ +/*! + * \brief Evaluate nb of hexa + */ +//================================================================================ + +bool StdMeshers_HexaFromSkin_3D::Evaluate(SMESH_Mesh & aMesh, + const TopoDS_Shape & aShape, + MapShapeNbElems& aResMap) +{ + _Skin skin; + int nbBlocks = skin.findBlocks(aMesh); + if ( nbBlocks == 0 ) + return error( skin.error()); + + bool secondOrder = aMesh.NbFaces( ORDER_QUADRATIC ); + + int entity = secondOrder ? SMDSEntity_Quad_Hexa : SMDSEntity_Hexa; + vector& nbByType = aResMap[ aMesh.GetSubMesh( aShape )]; + if ( entity >= nbByType.size() ) + nbByType.resize( SMDSEntity_Last, 0 ); + + for ( int i = 0; i < nbBlocks; ++i ) + { + const _Block& block = skin.getBlock( i ); + + int nbX = block.getSide(B_BOTTOM).getHoriSize(); + int nbY = block.getSide(B_BOTTOM).getVertSize(); + int nbZ = block.getSide(B_FRONT ).getVertSize(); + + int nbHexa = (nbX-1) * (nbY-1) * (nbZ-1); + int nbNodes = (nbX-2) * (nbY-2) * (nbZ-2); + if ( secondOrder ) + nbNodes += + (nbX-2) * (nbY-2) * (nbZ-1) + + (nbX-2) * (nbY-1) * (nbZ-2) + + (nbX-1) * (nbY-2) * (nbZ-2); + + + nbByType[ entity ] += nbHexa; + nbByType[ SMDSEntity_Node ] += nbNodes; + } + + return true; +} + +//================================================================================ +/*! + * \brief Abstract method must be defined but does nothing + */ +//================================================================================ + +bool StdMeshers_HexaFromSkin_3D::CheckHypothesis(SMESH_Mesh&, const TopoDS_Shape&, + Hypothesis_Status& aStatus) +{ + aStatus = SMESH_Hypothesis::HYP_OK; + return true; +} + +//================================================================================ +/*! + * \brief Abstract method must be defined but just reports an error as this + * algo is not intended to work with shapes + */ +//================================================================================ + +bool StdMeshers_HexaFromSkin_3D::Compute(SMESH_Mesh&, const TopoDS_Shape&) +{ + return error("Algorithm can't work with geometrical shapes"); +} + diff --git a/src/StdMeshers/StdMeshers_HexaFromSkin_3D.hxx b/src/StdMeshers/StdMeshers_HexaFromSkin_3D.hxx new file mode 100644 index 000000000..a2d811fee --- /dev/null +++ b/src/StdMeshers/StdMeshers_HexaFromSkin_3D.hxx @@ -0,0 +1,54 @@ +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. +// +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. +// +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +// + +// File : StdMeshers_HexaFromSkin_3D.hxx +// Created : Wed Jan 27 12:23:21 2010 +// Author : Edward AGAPOV (eap) +// +#ifndef __StdMeshers_HexaFromSkin_3D_HXX__ +#define __StdMeshers_HexaFromSkin_3D_HXX__ + +#include "SMESH_StdMeshers.hxx" +#include "SMESH_3D_Algo.hxx" + +/*! + * \brief Alorithm generating hexahedral mesh from 2D skin of block + */ + +class STDMESHERS_EXPORT StdMeshers_HexaFromSkin_3D : public SMESH_3D_Algo +{ +public: + StdMeshers_HexaFromSkin_3D(int hypId, int studyId, SMESH_Gen* gen); + virtual ~StdMeshers_HexaFromSkin_3D(); + + virtual bool Compute(SMESH_Mesh & aMesh, SMESH_MesherHelper* aHelper); + + virtual bool CheckHypothesis(SMESH_Mesh& aMesh, + const TopoDS_Shape& aShape, + Hypothesis_Status& aStatus); + + virtual bool Compute(SMESH_Mesh& aMesh, const TopoDS_Shape& aShape); + + virtual bool Evaluate(SMESH_Mesh & aMesh, + const TopoDS_Shape & aShape, + MapShapeNbElems& aResMap); + +}; + +#endif diff --git a/src/StdMeshers/StdMeshers_Hexa_3D.cxx b/src/StdMeshers/StdMeshers_Hexa_3D.cxx index 7e1c49a35..4701c050d 100644 --- a/src/StdMeshers/StdMeshers_Hexa_3D.cxx +++ b/src/StdMeshers/StdMeshers_Hexa_3D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Hexa_3D.cxx // Moved here from SMESH_Hexa_3D.cxx @@ -26,8 +27,10 @@ // Module : SMESH // #include "StdMeshers_Hexa_3D.hxx" + #include "StdMeshers_CompositeHexa_3D.hxx" #include "StdMeshers_FaceSide.hxx" +#include "StdMeshers_HexaFromSkin_3D.hxx" #include "StdMeshers_Penta_3D.hxx" #include "StdMeshers_Prism_3D.hxx" #include "StdMeshers_Quadrangle_2D.hxx" @@ -78,6 +81,7 @@ StdMeshers_Hexa_3D::StdMeshers_Hexa_3D(int hypId, int studyId, SMESH_Gen * gen) MESSAGE("StdMeshers_Hexa_3D::StdMeshers_Hexa_3D"); _name = "Hexa_3D"; _shapeType = (1 << TopAbs_SHELL) | (1 << TopAbs_SOLID); // 1 bit /shape type + _requireShape = false; } //============================================================================= @@ -865,10 +869,27 @@ bool StdMeshers_Hexa_3D::Evaluate(SMESH_Mesh & aMesh, return true; } +//================================================================================ +/*! + * \brief Computes hexahedral mesh from 2D mesh of block + */ +//================================================================================ + +bool StdMeshers_Hexa_3D::Compute(SMESH_Mesh & aMesh, SMESH_MesherHelper* aHelper) +{ + static StdMeshers_HexaFromSkin_3D * algo = 0; + if ( !algo ) { + SMESH_Gen* gen = aMesh.GetGen(); + algo = new StdMeshers_HexaFromSkin_3D( gen->GetANewId(), 0, gen ); + } + algo->InitComputeError(); + algo->Compute( aMesh, aHelper ); + return error( algo->GetComputeError()); +} //============================================================================= /*! - * + * */ //============================================================================= diff --git a/src/StdMeshers/StdMeshers_Hexa_3D.hxx b/src/StdMeshers/StdMeshers_Hexa_3D.hxx index d34d812dd..f4608a79a 100644 --- a/src/StdMeshers/StdMeshers_Hexa_3D.hxx +++ b/src/StdMeshers/StdMeshers_Hexa_3D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Hexa_3D.hxx // Moved here from SMESH_Hexa_3D.hxx @@ -73,9 +74,9 @@ public: const TopoDS_Shape& aShape, SMESH_Hypothesis::Hypothesis_Status& aStatus); - virtual bool Compute(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape) - /*throw (SALOME_Exception)*/; + virtual bool Compute(SMESH_Mesh& aMesh, const TopoDS_Shape& aShape); + + virtual bool Compute(SMESH_Mesh & aMesh, SMESH_MesherHelper* aHelper); virtual bool Evaluate(SMESH_Mesh & aMesh, const TopoDS_Shape & aShape, MapShapeNbElems& aResMap); @@ -87,32 +88,32 @@ public: protected: TopoDS_Edge EdgeNotInFace(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape, - const TopoDS_Face& aFace, - const TopoDS_Vertex& aVertex, - const TopTools_IndexedDataMapOfShapeListOfShape& MS); + const TopoDS_Shape& aShape, + const TopoDS_Face& aFace, + const TopoDS_Vertex& aVertex, + const TopTools_IndexedDataMapOfShapeListOfShape& MS); int GetFaceIndex(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape, - const std::vector& meshFaces, - const TopoDS_Vertex& V0, - const TopoDS_Vertex& V1, - const TopoDS_Vertex& V2, - const TopoDS_Vertex& V3); + const TopoDS_Shape& aShape, + const std::vector& meshFaces, + const TopoDS_Vertex& V0, + const TopoDS_Vertex& V1, + const TopoDS_Vertex& V2, + const TopoDS_Vertex& V3); void GetConv2DCoefs(const faceQuadStruct& quad, - const TopoDS_Shape& aShape, - const TopoDS_Vertex& V0, - const TopoDS_Vertex& V1, - const TopoDS_Vertex& V2, - const TopoDS_Vertex& V3, - Conv2DStruct& conv); + const TopoDS_Shape& aShape, + const TopoDS_Vertex& V0, + const TopoDS_Vertex& V1, + const TopoDS_Vertex& V2, + const TopoDS_Vertex& V3, + Conv2DStruct& conv); void GetPoint(Pt3 p, - int i, int j, int k, - int nbx, int nby, int nbz, - Point3DStruct *np, - const SMESHDS_Mesh* meshDS); + int i, int j, int k, + int nbx, int nby, int nbz, + Point3DStruct *np, + const SMESHDS_Mesh* meshDS); bool ClearAndReturn(FaceQuadStruct* theQuads[6], const bool res); }; diff --git a/src/StdMeshers/StdMeshers_LayerDistribution.cxx b/src/StdMeshers/StdMeshers_LayerDistribution.cxx index 8e5987e6b..56cbf7492 100644 --- a/src/StdMeshers/StdMeshers_LayerDistribution.cxx +++ b/src/StdMeshers/StdMeshers_LayerDistribution.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's classes // File : StdMeshers_LayerDistribution.cxx // Author : Edward AGAPOV diff --git a/src/StdMeshers/StdMeshers_LayerDistribution.hxx b/src/StdMeshers/StdMeshers_LayerDistribution.hxx index aca054d4f..0f780cd22 100644 --- a/src/StdMeshers/StdMeshers_LayerDistribution.hxx +++ b/src/StdMeshers/StdMeshers_LayerDistribution.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's calsses // File : StdMeshers_LayerDistribution.hxx // Author : Edward AGAPOV diff --git a/src/StdMeshers/StdMeshers_LayerDistribution2D.cxx b/src/StdMeshers/StdMeshers_LayerDistribution2D.cxx index 23d039bee..279466dcc 100644 --- a/src/StdMeshers/StdMeshers_LayerDistribution2D.cxx +++ b/src/StdMeshers/StdMeshers_LayerDistribution2D.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's classes // File : StdMeshers_LayerDistribution2D.cxx // Author : Edward AGAPOV diff --git a/src/StdMeshers/StdMeshers_LayerDistribution2D.hxx b/src/StdMeshers/StdMeshers_LayerDistribution2D.hxx index d06b6ead2..267003ab0 100644 --- a/src/StdMeshers/StdMeshers_LayerDistribution2D.hxx +++ b/src/StdMeshers/StdMeshers_LayerDistribution2D.hxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's calsses // File : StdMeshers_LayerDistribution2D.hxx // Author : Edward AGAPOV diff --git a/src/StdMeshers/StdMeshers_LengthFromEdges.cxx b/src/StdMeshers/StdMeshers_LengthFromEdges.cxx index cad6e9186..9a8395f30 100644 --- a/src/StdMeshers/StdMeshers_LengthFromEdges.cxx +++ b/src/StdMeshers/StdMeshers_LengthFromEdges.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_LengthFromEdges.cxx // Moved here from SMESH_LengthFromEdges.cxx diff --git a/src/StdMeshers/StdMeshers_LengthFromEdges.hxx b/src/StdMeshers/StdMeshers_LengthFromEdges.hxx index cb52638e5..b0dd703b1 100644 --- a/src/StdMeshers/StdMeshers_LengthFromEdges.hxx +++ b/src/StdMeshers/StdMeshers_LengthFromEdges.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,13 +19,13 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_LengthFromEdges.hxx // Moved here from SMESH_LengthFromEdges.hxx // Author : Paul RASCLE, EDF // Module : SMESH // - #ifndef _SMESH_LENGTHFROMEDGES_HXX_ #define _SMESH_LENGTHFROMEDGES_HXX_ diff --git a/src/StdMeshers/StdMeshers_LocalLength.cxx b/src/StdMeshers/StdMeshers_LocalLength.cxx index d52d2de54..2c8646bd6 100644 --- a/src/StdMeshers/StdMeshers_LocalLength.cxx +++ b/src/StdMeshers/StdMeshers_LocalLength.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,13 +19,13 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_LocalLength.cxx // Moved here from SMESH_LocalLength.cxx // Author : Paul RASCLE, EDF // Module : SMESH // - #include "StdMeshers_LocalLength.hxx" #include "SMESH_Mesh.hxx" diff --git a/src/StdMeshers/StdMeshers_LocalLength.hxx b/src/StdMeshers/StdMeshers_LocalLength.hxx index 1c8d72b27..3dabbbaef 100644 --- a/src/StdMeshers/StdMeshers_LocalLength.hxx +++ b/src/StdMeshers/StdMeshers_LocalLength.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,13 +19,13 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_LocalLength.hxx // Moved here from SMESH_LocalLength.hxx // Author : Paul RASCLE, EDF // Module : SMESH // - #ifndef _SMESH_LOCALLENGTH_HXX_ #define _SMESH_LOCALLENGTH_HXX_ diff --git a/src/StdMeshers/StdMeshers_MEFISTO_2D.cxx b/src/StdMeshers/StdMeshers_MEFISTO_2D.cxx index f4ef0198d..e8516d311 100644 --- a/src/StdMeshers/StdMeshers_MEFISTO_2D.cxx +++ b/src/StdMeshers/StdMeshers_MEFISTO_2D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_MEFISTO_2D.cxx // Moved here from SMESH_MEFISTO_2D.cxx @@ -296,8 +297,8 @@ bool StdMeshers_MEFISTO_2D::Compute(SMESH_Mesh & aMesh, const TopoDS_Shape & aSh //============================================================================= bool StdMeshers_MEFISTO_2D::Evaluate(SMESH_Mesh & aMesh, - const TopoDS_Shape & aShape, - MapShapeNbElems& aResMap) + const TopoDS_Shape & aShape, + MapShapeNbElems& aResMap) { MESSAGE("StdMeshers_MEFISTO_2D::Evaluate"); @@ -604,8 +605,31 @@ bool StdMeshers_MEFISTO_2D::LoadPoints(TWireVector & wires, // set UV uvslf[m].x = uvPt->u * scalex; uvslf[m].y = uvPt->v * scaley; - if ( uvPt->node->GetPosition()->GetTypeOfPosition() == SMDS_TOP_VERTEX ) + switch ( uvPt->node->GetPosition()->GetTypeOfPosition()) + { + case SMDS_TOP_VERTEX: mOnVertex.push_back( m ); + break; + case SMDS_TOP_EDGE: + // In order to detect degenerated faces easily, we replace + // nodes on a degenerated edge by node on the vertex of that edge + if ( myTool->IsDegenShape( uvPt->node->GetPosition()->GetShapeId() )) + { + int edgeID = uvPt->node->GetPosition()->GetShapeId(); + SMESH_subMesh* edgeSM = myTool->GetMesh()->GetSubMeshContaining( edgeID ); + SMESH_subMeshIteratorPtr smIt = edgeSM->getDependsOnIterator( /*includeSelf=*/0, + /*complexShapeFirst=*/0); + if ( smIt->more() ) + { + SMESH_subMesh* vertexSM = smIt->next(); + SMDS_NodeIteratorPtr nIt = vertexSM->GetSubMeshDS()->GetNodes(); + if ( nIt->more() ) + mefistoToDS[m] = nIt->next(); + } + } + break; + default:; + } m++; } @@ -632,6 +656,9 @@ bool StdMeshers_MEFISTO_2D::LoadPoints(TWireVector & wires, fixOverlappedLinkUV (uvslf[ mB ], uvslf[ m ], uvslf[ mA ]); } } +// cout << "MEFISTO INPUT************" << endl; +// for ( int i =0; i < m; ++i ) +// cout << i << ": \t" << uvslf[i].x << ", " << uvslf[i].y << " Node " << mefistoToDS[i]->GetID()<< endl; return true; } @@ -778,13 +805,17 @@ void StdMeshers_MEFISTO_2D::StoreResult(Z nbst, R2 * uvst, Z nbt, Z * nust, const SMDS_MeshNode * n2 = mefistoToDS[ nust[m++] - 1 ]; const SMDS_MeshNode * n3 = mefistoToDS[ nust[m++] - 1 ]; - SMDS_MeshElement * elt; - if (triangleIsWellOriented) - elt = myTool->AddFace(n1, n2, n3); - else - elt = myTool->AddFace(n1, n3, n2); - - meshDS->SetMeshElementOnShape(elt, faceID); + // avoid creating degenetrated faces + bool isDegen = ( myTool->HasDegeneratedEdges() && ( n1 == n2 || n1 == n3 || n2 == n3 )); + if ( !isDegen ) + { + SMDS_MeshElement * elt; + if (triangleIsWellOriented) + elt = myTool->AddFace(n1, n2, n3); + else + elt = myTool->AddFace(n1, n3, n2); + meshDS->SetMeshElementOnShape(elt, faceID); + } m++; } diff --git a/src/StdMeshers/StdMeshers_MEFISTO_2D.hxx b/src/StdMeshers/StdMeshers_MEFISTO_2D.hxx index 73075dc07..36f916262 100644 --- a/src/StdMeshers/StdMeshers_MEFISTO_2D.hxx +++ b/src/StdMeshers/StdMeshers_MEFISTO_2D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_MEFISTO_2D.hxx // Moved here from SMESH_MEFISTO_2D.hxx @@ -55,7 +56,7 @@ public: SMESH_Hypothesis::Hypothesis_Status& aStatus); virtual bool Compute(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape); + const TopoDS_Shape& aShape); virtual bool Evaluate(SMESH_Mesh & aMesh, const TopoDS_Shape & aShape, MapShapeNbElems& aResMap); @@ -64,19 +65,19 @@ public: typedef std::vector< StdMeshers_FaceSidePtr > TWireVector; bool LoadPoints(TWireVector & wires, - R2* uvslf, - std::vector< const SMDS_MeshNode*>& mefistoToDS, + R2* uvslf, + std::vector< const SMDS_MeshNode*>& mefistoToDS, double scalex, double scaley); void ComputeScaleOnFace(SMESH_Mesh& aMesh, - const TopoDS_Face& aFace, - double& scalex, - double& scaley); + const TopoDS_Face& aFace, + double& scalex, + double& scaley); void StoreResult (Z nbst, R2* uvst, Z nbt, Z* nust, - std::vector< const SMDS_MeshNode*>& mefistoToDS, + std::vector< const SMDS_MeshNode*>& mefistoToDS, double scalex, double scaley); - + protected: double _edgeLength; double _maxElementArea; diff --git a/src/StdMeshers/StdMeshers_MaxElementArea.cxx b/src/StdMeshers/StdMeshers_MaxElementArea.cxx index 1dce3de1f..75df5eefd 100644 --- a/src/StdMeshers/StdMeshers_MaxElementArea.cxx +++ b/src/StdMeshers/StdMeshers_MaxElementArea.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,13 +19,13 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_MaxElementArea.cxx // Moved here from SMESH_MaxElementArea.cxx // Author : Paul RASCLE, EDF // Module : SMESH // - #include "StdMeshers_MaxElementArea.hxx" #include "SMESH_ControlsDef.hxx" diff --git a/src/StdMeshers/StdMeshers_MaxElementArea.hxx b/src/StdMeshers/StdMeshers_MaxElementArea.hxx index 095067363..f1783ee53 100644 --- a/src/StdMeshers/StdMeshers_MaxElementArea.hxx +++ b/src/StdMeshers/StdMeshers_MaxElementArea.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_MaxElementArea.hxx // Moved here from SMESH_MaxElementArea.hxx diff --git a/src/StdMeshers/StdMeshers_MaxElementVolume.cxx b/src/StdMeshers/StdMeshers_MaxElementVolume.cxx index 79be9d6bc..b76924f04 100644 --- a/src/StdMeshers/StdMeshers_MaxElementVolume.cxx +++ b/src/StdMeshers/StdMeshers_MaxElementVolume.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_MaxElementVolume.cxx // Moved here from SMESH_MaxElementVolume.cxx diff --git a/src/StdMeshers/StdMeshers_MaxElementVolume.hxx b/src/StdMeshers/StdMeshers_MaxElementVolume.hxx index 6395fd419..a290332ab 100644 --- a/src/StdMeshers/StdMeshers_MaxElementVolume.hxx +++ b/src/StdMeshers/StdMeshers_MaxElementVolume.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,12 +19,13 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_MaxElementVolume.hxx // Moved here from SMESH_MaxElementVolume.hxx // Author : Paul RASCLE, EDF // Module : SMESH - +// #ifndef _SMESH_MAXELEMENTVOLUME_HXX_ #define _SMESH_MAXELEMENTVOLUME_HXX_ diff --git a/src/StdMeshers/StdMeshers_MaxLength.cxx b/src/StdMeshers/StdMeshers_MaxLength.cxx index 918fe6c78..8d14ce192 100644 --- a/src/StdMeshers/StdMeshers_MaxLength.cxx +++ b/src/StdMeshers/StdMeshers_MaxLength.cxx @@ -1,27 +1,26 @@ -// SMESH SMESH : implementaion of SMESH idl descriptions +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. +// +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. +// +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // -// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS -// -// This library is free software; you can redistribute it and/or -// modify it under the terms of the GNU Lesser General Public -// License as published by the Free Software Foundation; either -// version 2.1 of the License. -// -// This library is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -// Lesser General Public License for more details. -// -// You should have received a copy of the GNU Lesser General Public -// License along with this library; if not, write to the Free Software -// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -// -// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + +// SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_MaxLength.cxx // Module : SMESH - +// #include "StdMeshers_MaxLength.hxx" #include "SMESH_Mesh.hxx" diff --git a/src/StdMeshers/StdMeshers_MaxLength.hxx b/src/StdMeshers/StdMeshers_MaxLength.hxx index 23d94a9f2..b05b42cad 100644 --- a/src/StdMeshers/StdMeshers_MaxLength.hxx +++ b/src/StdMeshers/StdMeshers_MaxLength.hxx @@ -1,27 +1,26 @@ -// SMESH SMESH : implementaion of SMESH idl descriptions +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +// +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. +// +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. +// +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // -// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS -// -// This library is free software; you can redistribute it and/or -// modify it under the terms of the GNU Lesser General Public -// License as published by the Free Software Foundation; either -// version 2.1 of the License. -// -// This library is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -// Lesser General Public License for more details. -// -// You should have received a copy of the GNU Lesser General Public -// License along with this library; if not, write to the Free Software -// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -// -// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +// SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_MaxLength.hxx // Module : SMESH - +// #ifndef _SMESH_MaxLength_HXX_ #define _SMESH_MaxLength_HXX_ diff --git a/src/StdMeshers/StdMeshers_NotConformAllowed.cxx b/src/StdMeshers/StdMeshers_NotConformAllowed.cxx index 66c58f13c..0d69fbb6d 100644 --- a/src/StdMeshers/StdMeshers_NotConformAllowed.cxx +++ b/src/StdMeshers/StdMeshers_NotConformAllowed.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of SMESH idl descriptions // File : StdMeshers_NotConformAllowed.cxx // Author : Paul RASCLE, EDF diff --git a/src/StdMeshers/StdMeshers_NotConformAllowed.hxx b/src/StdMeshers/StdMeshers_NotConformAllowed.hxx index ddcfcb445..e573039c1 100644 --- a/src/StdMeshers/StdMeshers_NotConformAllowed.hxx +++ b/src/StdMeshers/StdMeshers_NotConformAllowed.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of SMESH idl descriptions // File : StdMeshers_NotConformAllowed.hxx // Author : Paul RASCLE, EDF diff --git a/src/StdMeshers/StdMeshers_NumberOfLayers.cxx b/src/StdMeshers/StdMeshers_NumberOfLayers.cxx index 8abb02c63..5aa1b9c43 100644 --- a/src/StdMeshers/StdMeshers_NumberOfLayers.cxx +++ b/src/StdMeshers/StdMeshers_NumberOfLayers.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's classes // File : StdMeshers_NumberOfLayers.cxx // Author : Edward AGAPOV diff --git a/src/StdMeshers/StdMeshers_NumberOfLayers.hxx b/src/StdMeshers/StdMeshers_NumberOfLayers.hxx index ebaae84a9..98f5a4a14 100644 --- a/src/StdMeshers/StdMeshers_NumberOfLayers.hxx +++ b/src/StdMeshers/StdMeshers_NumberOfLayers.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's calsses // File : StdMeshers_NumberOfLayers.hxx // Author : Edward AGAPOV diff --git a/src/StdMeshers/StdMeshers_NumberOfLayers2D.cxx b/src/StdMeshers/StdMeshers_NumberOfLayers2D.cxx index af2f04dab..da3ee6ccb 100644 --- a/src/StdMeshers/StdMeshers_NumberOfLayers2D.cxx +++ b/src/StdMeshers/StdMeshers_NumberOfLayers2D.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,12 +16,12 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's classes // File : StdMeshers_NumberOfLayers2D.cxx // Author : Edward AGAPOV // Module : SMESH // - #include "StdMeshers_NumberOfLayers2D.hxx" #include "utilities.h" diff --git a/src/StdMeshers/StdMeshers_NumberOfLayers2D.hxx b/src/StdMeshers/StdMeshers_NumberOfLayers2D.hxx index 42690f0e5..fef7cfb60 100644 --- a/src/StdMeshers/StdMeshers_NumberOfLayers2D.hxx +++ b/src/StdMeshers/StdMeshers_NumberOfLayers2D.hxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's calsses // File : StdMeshers_NumberOfLayers2D.hxx // Author : Edward AGAPOV diff --git a/src/StdMeshers/StdMeshers_NumberOfSegments.cxx b/src/StdMeshers/StdMeshers_NumberOfSegments.cxx index ce4876ee3..2a9fd2c1a 100644 --- a/src/StdMeshers/StdMeshers_NumberOfSegments.cxx +++ b/src/StdMeshers/StdMeshers_NumberOfSegments.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_NumberOfSegments.cxx // Moved here from SMESH_NumberOfSegments.cxx diff --git a/src/StdMeshers/StdMeshers_NumberOfSegments.hxx b/src/StdMeshers/StdMeshers_NumberOfSegments.hxx index 985d192b2..1ca99dfe8 100644 --- a/src/StdMeshers/StdMeshers_NumberOfSegments.hxx +++ b/src/StdMeshers/StdMeshers_NumberOfSegments.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_NumberOfSegments.hxx // Moved here from SMESH_NumberOfSegments.hxx diff --git a/src/StdMeshers/StdMeshers_Penta_3D.cxx b/src/StdMeshers/StdMeshers_Penta_3D.cxx index a12a3f088..7e21e3113 100644 --- a/src/StdMeshers/StdMeshers_Penta_3D.cxx +++ b/src/StdMeshers/StdMeshers_Penta_3D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers_Penta_3D implementaion of SMESH idl descriptions // File : StdMeshers_Penta_3D.cxx // Module : SMESH diff --git a/src/StdMeshers/StdMeshers_Penta_3D.hxx b/src/StdMeshers/StdMeshers_Penta_3D.hxx index 882c3b4f3..0ef1037bf 100644 --- a/src/StdMeshers/StdMeshers_Penta_3D.hxx +++ b/src/StdMeshers/StdMeshers_Penta_3D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of SMESH idl descriptions // File : StdMeshers_Penta_3D.hxx // Module : SMESH @@ -58,26 +59,26 @@ public: void Load (const TopoDS_Shell& theShell); void Load (const TopoDS_Shell& theShell, - const TopoDS_Vertex& theV000, - const TopoDS_Vertex& theV001); + const TopoDS_Vertex& theV000, + const TopoDS_Vertex& theV001); void ComputeParameters(const gp_Pnt& thePnt, - gp_XYZ& theXYZ); + gp_XYZ& theXYZ); void ComputeParameters(const gp_Pnt& thePnt, - const TopoDS_Shape& theShape, - gp_XYZ& theXYZ); + const TopoDS_Shape& theShape, + gp_XYZ& theXYZ); void ComputeParameters(const double& theU, - const TopoDS_Shape& theShape, - gp_XYZ& theXYZ); + const TopoDS_Shape& theShape, + gp_XYZ& theXYZ); void Point(const gp_XYZ& theParams, - gp_Pnt& thePnt); + gp_Pnt& thePnt); void Point(const gp_XYZ& theParams, - const TopoDS_Shape& theShape, - gp_Pnt& thePnt); + const TopoDS_Shape& theShape, + gp_Pnt& thePnt); int ShapeID(const TopoDS_Shape& theShape); @@ -206,7 +207,7 @@ class STDMESHERS_EXPORT StdMeshers_Penta_3D { // 0-the node on theBaseEdge. bool Evaluate(SMESH_Mesh & aMesh, const TopoDS_Shape & aShape, - MapShapeNbElems& aResMap); + MapShapeNbElems& aResMap); protected: // methods @@ -223,17 +224,17 @@ class STDMESHERS_EXPORT StdMeshers_Penta_3D { std::vector*& aCol2); void ShapeSupportID(const bool theIsUpperLayer, - const SMESH_Block::TShapeID theBNSSID, - SMESH_Block::TShapeID& theSSID); + const SMESH_Block::TShapeID theBNSSID, + SMESH_Block::TShapeID& theSSID); void FindNodeOnShape(const TopoDS_Shape& aS, - const gp_XYZ& aParams, + const gp_XYZ& aParams, const int z, - StdMeshers_TNode& aTN); + StdMeshers_TNode& aTN); void CreateNode(const bool theIsUpperLayer, - const gp_XYZ& aParams, - StdMeshers_TNode& aTN); + const gp_XYZ& aParams, + StdMeshers_TNode& aTN); void ClearMeshOnFxy1(); diff --git a/src/StdMeshers/StdMeshers_Prism_3D.cxx b/src/StdMeshers/StdMeshers_Prism_3D.cxx index 009b0a7f4..c7bf42004 100644 --- a/src/StdMeshers/StdMeshers_Prism_3D.cxx +++ b/src/StdMeshers/StdMeshers_Prism_3D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Prism_3D.cxx // Module : SMESH @@ -37,14 +38,18 @@ #include "utilities.h" #include +#include #include #include +#include #include #include #include -#include #include +#include #include +#include +#include using namespace std; @@ -151,6 +156,152 @@ namespace { } params.push_back( parLast ); // 1. } + + //================================================================================ + /*! + * \brief Return coordinate system for z-th layer of nodes + */ + //================================================================================ + + gp_Ax2 getLayerCoordSys(const int z, + const vector< const TNodeColumn* >& columns, + int& xColumn) + { + // gravity center of a layer + gp_XYZ O(0,0,0); + int vertexCol = -1; + for ( int i = 0; i < columns.size(); ++i ) + { + O += gpXYZ( (*columns[ i ])[ z ]); + if ( vertexCol < 0 && + columns[ i ]->front()->GetPosition()->GetTypeOfPosition() == SMDS_TOP_VERTEX ) + vertexCol = i; + } + O /= columns.size(); + + // Z axis + gp_Vec Z(0,0,0); + int iPrev = columns.size()-1; + for ( int i = 0; i < columns.size(); ++i ) + { + gp_Vec v1( O, gpXYZ( (*columns[ iPrev ])[ z ])); + gp_Vec v2( O, gpXYZ( (*columns[ i ] )[ z ])); + Z += v1 ^ v2; + iPrev = i; + } + + if ( vertexCol >= 0 ) + { + O = gpXYZ( (*columns[ vertexCol ])[ z ]); + } + if ( xColumn < 0 || xColumn >= columns.size() ) + { + // select a column for X dir + double maxDist = 0; + for ( int i = 0; i < columns.size(); ++i ) + { + double dist = ( O - gpXYZ((*columns[ i ])[ z ])).SquareModulus(); + if ( dist > maxDist ) + { + xColumn = i; + maxDist = dist; + } + } + } + + // X axis + gp_Vec X( O, gpXYZ( (*columns[ xColumn ])[ z ])); + + return gp_Ax2( O, Z, X); + } + + //================================================================================ + /*! + * \brief Removes submeshes meshed with regular grid from given list + * \retval int - nb of removed submeshes + */ + //================================================================================ + + int removeQuasiQuads(list< SMESH_subMesh* >& notQuadSubMesh) + { + int oldNbSM = notQuadSubMesh.size(); + SMESHDS_Mesh* mesh = notQuadSubMesh.front()->GetFather()->GetMeshDS(); + list< SMESH_subMesh* >::iterator smIt = notQuadSubMesh.begin(); +#define __NEXT_SM { ++smIt; continue; } + while ( smIt != notQuadSubMesh.end() ) + { + SMESH_subMesh* faceSm = *smIt; + SMESHDS_SubMesh* faceSmDS = faceSm->GetSubMeshDS(); + int nbQuads = faceSmDS->NbElements(); + if ( nbQuads == 0 ) __NEXT_SM; + + // get oredered edges + list< TopoDS_Edge > orderedEdges; + list< int > nbEdgesInWires; + TopoDS_Vertex V000; + int nbWires = SMESH_Block::GetOrderedEdges( TopoDS::Face( faceSm->GetSubShape() ), + V000, orderedEdges, nbEdgesInWires ); + if ( nbWires != 1 || nbEdgesInWires.front() <= 4 ) + __NEXT_SM; + + // get nb of segements on edges + list nbSegOnEdge; + list< TopoDS_Edge >::iterator edge = orderedEdges.begin(); + for ( ; edge != orderedEdges.end(); ++edge ) + { + if ( SMESHDS_SubMesh* edgeSmDS = mesh->MeshElements( *edge )) + nbSegOnEdge.push_back( edgeSmDS->NbElements() ); + else + nbSegOnEdge.push_back(0); + } + + // unite nbSegOnEdge of continues edges + int nbEdges = nbEdgesInWires.front(); + list::iterator nbSegIt = nbSegOnEdge.begin(); + for ( edge = orderedEdges.begin(); edge != orderedEdges.end(); ) + { + const TopoDS_Edge& e1 = *edge++; + const TopoDS_Edge& e2 = ( edge == orderedEdges.end() ? orderedEdges.front() : *edge ); + if ( SMESH_Algo::IsContinuous( e1, e2 )) + { + // common vertex of continues edges must be shared by two 2D mesh elems of geom face + TopoDS_Vertex vCommon = TopExp::LastVertex( e1, true ); + const SMDS_MeshNode* vNode = SMESH_Algo::VertexNode( vCommon, mesh ); + int nbF = 0; + if ( vNode ) + { + SMDS_ElemIteratorPtr fIt = vNode->GetInverseElementIterator(SMDSAbs_Face); + while ( fIt->more() ) + nbF += faceSmDS->Contains( fIt->next() ); + } + list::iterator nbSegIt1 = nbSegIt++; + if ( !vNode || nbF == 2 ) // !vNode - two edges can be meshed as one + { + // unite + if ( nbSegIt == nbSegOnEdge.end() ) nbSegIt = nbSegOnEdge.begin(); + *nbSegIt += *nbSegIt1; + nbSegOnEdge.erase( nbSegIt1 ); + --nbEdges; + } + } + else + { + ++nbSegIt; + } + } + vector nbSegVec( nbSegOnEdge.begin(), nbSegOnEdge.end()); + if ( nbSegVec.size() == 4 && + nbSegVec[0] == nbSegVec[2] && + nbSegVec[1] == nbSegVec[3] && + nbSegVec[0] * nbSegVec[1] == nbQuads + ) + smIt = notQuadSubMesh.erase( smIt ); + else + __NEXT_SM; + } + + return oldNbSM - notQuadSubMesh.size(); + } } //======================================================================= @@ -162,7 +313,7 @@ StdMeshers_Prism_3D::StdMeshers_Prism_3D(int hypId, int studyId, SMESH_Gen* gen) :SMESH_3D_Algo(hypId, studyId, gen) { _name = "Prism_3D"; - _shapeType = (1 << TopAbs_SHELL) | (1 << TopAbs_SOLID); // 1 bit per shape type + _shapeType = (1 << TopAbs_SHELL) | (1 << TopAbs_SOLID); // 1 bit per shape type myProjectTriangles = false; } @@ -257,75 +408,115 @@ bool StdMeshers_Prism_3D::Compute(SMESH_Mesh& theMesh, const TopoDS_Shape& theSh // Projections on the top and bottom faces are taken from nodes existing // on these faces; find correspondence between bottom and top nodes myBotToColumnMap.clear(); - if ( !assocOrProjBottom2Top() ) // it also fill myBotToColumnMap + if ( !assocOrProjBottom2Top() ) // it also fills myBotToColumnMap return false; // Create nodes inside the block - // loop on nodes inside the bottom face - TNode2ColumnMap::iterator bot_column = myBotToColumnMap.begin(); - for ( ; bot_column != myBotToColumnMap.end(); ++bot_column ) + // try to use transformation (issue 0020680) + vector trsf; + if ( myBlock.GetLayersTransformation(trsf)) { - const TNode& tBotNode = bot_column->first; // bottom TNode - if ( tBotNode.GetPositionType() != SMDS_TOP_FACE ) - continue; // node is not inside face - - // column nodes; middle part of the column are zero pointers - TNodeColumn& column = bot_column->second; - - // bottom node parameters and coords - myShapeXYZ[ ID_BOT_FACE ] = tBotNode.GetCoords(); - gp_XYZ botParams = tBotNode.GetParams(); - - // compute top node parameters - myShapeXYZ[ ID_TOP_FACE ] = gpXYZ( column.back() ); - gp_XYZ topParams = botParams; - topParams.SetZ( 1 ); - if ( column.size() > 2 ) { - gp_Pnt topCoords = myShapeXYZ[ ID_TOP_FACE ]; - if ( !myBlock.ComputeParameters( topCoords, topParams, ID_TOP_FACE, topParams )) - return error(TCom("Can't compute normalized parameters ") - << "for node " << column.back()->GetID() - << " on the face #"<< column.back()->GetPosition()->GetShapeId() ); - } + // loop on nodes inside the bottom face + TNode2ColumnMap::iterator bot_column = myBotToColumnMap.begin(); + for ( ; bot_column != myBotToColumnMap.end(); ++bot_column ) + { + const TNode& tBotNode = bot_column->first; // bottom TNode + if ( tBotNode.GetPositionType() != SMDS_TOP_FACE ) + continue; // node is not inside face + + // column nodes; middle part of the column are zero pointers + TNodeColumn& column = bot_column->second; + TNodeColumn::iterator columnNodes = column.begin(); + for ( int z = 0; columnNodes != column.end(); ++columnNodes, ++z) + { + const SMDS_MeshNode* & node = *columnNodes; + if ( node ) continue; // skip bottom or top node - // vertical loop - TNodeColumn::iterator columnNodes = column.begin(); - for ( int z = 0; columnNodes != column.end(); ++columnNodes, ++z) + gp_XYZ coords = tBotNode.GetCoords(); + trsf[z-1].Transforms( coords ); + node = meshDS->AddNode( coords.X(), coords.Y(), coords.Z() ); + meshDS->SetNodeInVolume( node, volumeID ); + } + } // loop on bottom nodes + } + else // use block approach + { + // loop on nodes inside the bottom face + TNode prevBNode; + TNode2ColumnMap::iterator bot_column = myBotToColumnMap.begin(); + for ( ; bot_column != myBotToColumnMap.end(); ++bot_column ) { - const SMDS_MeshNode* & node = *columnNodes; - if ( node ) continue; // skip bottom or top node - - // params of a node to create - double rz = (double) z / (double) ( column.size() - 1 ); - gp_XYZ params = botParams * ( 1 - rz ) + topParams * rz; - - // set coords on all faces and nodes - const int nbSideFaces = 4; - int sideFaceIDs[nbSideFaces] = { SMESH_Block::ID_Fx0z, - SMESH_Block::ID_Fx1z, - SMESH_Block::ID_F0yz, - SMESH_Block::ID_F1yz }; - for ( int iF = 0; iF < nbSideFaces; ++iF ) - if ( !setFaceAndEdgesXYZ( sideFaceIDs[ iF ], params, z )) - return false; - - // compute coords for a new node - gp_XYZ coords; - if ( !SMESH_Block::ShellPoint( params, myShapeXYZ, coords )) - return error("Can't compute coordinates by normalized parameters"); - - SHOWYXZ("TOPFacePoint ",myShapeXYZ[ ID_TOP_FACE]); - SHOWYXZ("BOT Node "<< tBotNode.myNode->GetID(),gpXYZ(tBotNode.myNode)); - SHOWYXZ("ShellPoint ",coords); - - // create a node - node = meshDS->AddNode( coords.X(), coords.Y(), coords.Z() ); - meshDS->SetNodeInVolume( node, volumeID ); - } - } // loop on bottom nodes + const TNode& tBotNode = bot_column->first; // bottom TNode + if ( tBotNode.GetPositionType() != SMDS_TOP_FACE ) + continue; // node is not inside face + // column nodes; middle part of the column are zero pointers + TNodeColumn& column = bot_column->second; + + // compute bottom node parameters + gp_XYZ paramHint(-1,-1,-1); + if ( prevBNode.IsNeighbor( tBotNode )) + paramHint = prevBNode.GetParams(); + if ( !myBlock.ComputeParameters( tBotNode.GetCoords(), tBotNode.ChangeParams(), + ID_BOT_FACE, paramHint )) + return error(TCom("Can't compute normalized parameters for node ") + << tBotNode.myNode->GetID() << " on the face #" + << myBlock.SubMesh( ID_BOT_FACE )->GetId() ); + prevBNode = tBotNode; + + myShapeXYZ[ ID_BOT_FACE ] = tBotNode.GetCoords(); + gp_XYZ botParams = tBotNode.GetParams(); + + // compute top node parameters + myShapeXYZ[ ID_TOP_FACE ] = gpXYZ( column.back() ); + gp_XYZ topParams = botParams; + topParams.SetZ( 1 ); + if ( column.size() > 2 ) { + gp_Pnt topCoords = myShapeXYZ[ ID_TOP_FACE ]; + if ( !myBlock.ComputeParameters( topCoords, topParams, ID_TOP_FACE, topParams )) + return error(TCom("Can't compute normalized parameters ") + << "for node " << column.back()->GetID() + << " on the face #"<< column.back()->GetPosition()->GetShapeId() ); + } + + // vertical loop + TNodeColumn::iterator columnNodes = column.begin(); + for ( int z = 0; columnNodes != column.end(); ++columnNodes, ++z) + { + const SMDS_MeshNode* & node = *columnNodes; + if ( node ) continue; // skip bottom or top node + + // params of a node to create + double rz = (double) z / (double) ( column.size() - 1 ); + gp_XYZ params = botParams * ( 1 - rz ) + topParams * rz; + + // set coords on all faces and nodes + const int nbSideFaces = 4; + int sideFaceIDs[nbSideFaces] = { SMESH_Block::ID_Fx0z, + SMESH_Block::ID_Fx1z, + SMESH_Block::ID_F0yz, + SMESH_Block::ID_F1yz }; + for ( int iF = 0; iF < nbSideFaces; ++iF ) + if ( !setFaceAndEdgesXYZ( sideFaceIDs[ iF ], params, z )) + return false; + + // compute coords for a new node + gp_XYZ coords; + if ( !SMESH_Block::ShellPoint( params, myShapeXYZ, coords )) + return error("Can't compute coordinates by normalized parameters"); + + SHOWYXZ("TOPFacePoint ",myShapeXYZ[ ID_TOP_FACE]); + SHOWYXZ("BOT Node "<< tBotNode.myNode->GetID(),gpXYZ(tBotNode.myNode)); + SHOWYXZ("ShellPoint ",coords); + + // create a node + node = meshDS->AddNode( coords.X(), coords.Y(), coords.Z() ); + meshDS->SetNodeInVolume( node, volumeID ); + } + } // loop on bottom nodes + } // Create volumes @@ -349,7 +540,7 @@ bool StdMeshers_Prism_3D::Compute(SMESH_Mesh& theMesh, const TopoDS_Shape& theSh { const SMDS_MeshNode* n = face->GetNode( i ); if ( n->GetPosition()->GetTypeOfPosition() == SMDS_TOP_FACE ) { - bot_column = myBotToColumnMap.find( n ); + TNode2ColumnMap::iterator bot_column = myBotToColumnMap.find( n ); if ( bot_column == myBotToColumnMap.end() ) return error(TCom("No nodes found above node ") << n->GetID() ); columns[ i ] = & bot_column->second; @@ -375,8 +566,8 @@ bool StdMeshers_Prism_3D::Compute(SMESH_Mesh& theMesh, const TopoDS_Shape& theSh //======================================================================= bool StdMeshers_Prism_3D::Evaluate(SMESH_Mesh& theMesh, - const TopoDS_Shape& theShape, - MapShapeNbElems& aResMap) + const TopoDS_Shape& theShape, + MapShapeNbElems& aResMap) { // find face contains only triangles vector < SMESH_subMesh * >meshFaces; @@ -436,8 +627,8 @@ bool StdMeshers_Prism_3D::Evaluate(SMESH_Mesh& theMesh, bool IsOpposite = true; for(TopExp_Explorer exp(aFaces.Value(i), TopAbs_EDGE); exp.More(); exp.Next()) { if( Edges1.Contains(exp.Current()) ) { - IsOpposite = false; - break; + IsOpposite = false; + break; } } if(IsOpposite) { @@ -652,7 +843,7 @@ bool StdMeshers_Prism_3D::assocOrProjBottom2Top() // Fill myBotToColumnMap int zSize = myBlock.VerticalSize(); - TNode prevTNode; + //TNode prevTNode; TNodeNodeMap::iterator bN_tN = n2nMap.begin(); for ( ; bN_tN != n2nMap.end(); ++bN_tN ) { @@ -660,19 +851,8 @@ bool StdMeshers_Prism_3D::assocOrProjBottom2Top() const SMDS_MeshNode* topNode = bN_tN->second; if ( botNode->GetPosition()->GetTypeOfPosition() != SMDS_TOP_FACE ) continue; // wall columns are contained in myBlock - // compute bottom node params - TNode bN( botNode ); - if ( zSize > 2 ) { - gp_XYZ paramHint(-1,-1,-1); - if ( prevTNode.IsNeighbor( bN )) - paramHint = prevTNode.GetParams(); - if ( !myBlock.ComputeParameters( bN.GetCoords(), bN.ChangeParams(), - ID_BOT_FACE, paramHint )) - return error(TCom("Can't compute normalized parameters for node ") - << botNode->GetID() << " on the face #"<< botSM->GetId() ); - prevTNode = bN; - } // create node column + TNode bN( botNode ); TNode2ColumnMap::iterator bN_col = myBotToColumnMap.insert( make_pair ( bN, TNodeColumn() )).first; TNodeColumn & column = bN_col->second; @@ -813,10 +993,10 @@ bool StdMeshers_Prism_3D::setFaceAndEdgesXYZ( const int faceID, const gp_XYZ& pa SMESH_Block::GetFaceEdgesIDs( faceID, edgeVec ); myBlock.EdgePoint( edgeVec[ BASE ], params, myShapeXYZ[ edgeVec[ BASE ]]); - myBlock.EdgePoint( edgeVec[ TOP ], params, myShapeXYZ[ edgeVec[ TOP ]]); + myBlock.EdgePoint( edgeVec[ TOP ], params, myShapeXYZ[ edgeVec[ TOP ]]); SHOWYXZ("\nparams ", params); - SHOWYXZ("TOP is "< 0 && nbNotQuad != 2 ) - return error(COMPERR_BAD_SHAPE, - TCom("More than 2 not quadrilateral faces: ") - < 2 ) + { return error(COMPERR_BAD_INPUT_MESH, TCom("More than 2 faces with not quadrangle elements: ") < 0 && nbNotQuad != 2 ) + { + // Issue 0020843 - one of side faces is quasi-quadrilateral. + // Remove from notQuadGeomSubMesh faces meshed with regular grid + nbQuasiQuads = removeQuasiQuads( notQuadGeomSubMesh ); + nbNotQuad -= nbQuasiQuads; + if ( nbNotQuad > 0 && nbNotQuad != 2 ) + return error(COMPERR_BAD_SHAPE, + TCom("More than 2 not quadrilateral faces: ") + <dumpNodes( 4 ); // debug } // horizontal faces geometry { @@ -1432,6 +1623,87 @@ const TNodeColumn* StdMeshers_PrismAsBlock::GetNodeColumn(const SMDS_MeshNode* n return 0; } +//======================================================================= +//function : GetLayersTransformation +//purpose : Return transformations to get coordinates of nodes of each layer +// by nodes of the bottom. Layer is a set of nodes at a certain step +// from bottom to top. +//======================================================================= + +bool StdMeshers_PrismAsBlock::GetLayersTransformation(vector & trsf) const +{ + const int zSize = VerticalSize(); + if ( zSize < 3 ) return true; + trsf.resize( zSize - 2 ); + + // Select some node columns by which we will define coordinate system of layers + + vector< const TNodeColumn* > columns; + { + const TopoDS_Shape& baseFace = Shape(ID_BOT_FACE); + list< TopoDS_Edge > orderedEdges; + list< int > nbEdgesInWires; + GetOrderedEdges( TopoDS::Face( baseFace ), TopoDS_Vertex(), orderedEdges, nbEdgesInWires ); + bool isReverse; + list< TopoDS_Edge >::iterator edgeIt = orderedEdges.begin(); + for ( int iE = 0; iE < nbEdgesInWires.front(); ++iE, ++edgeIt ) + { + const TParam2ColumnMap& u2colMap = + GetParam2ColumnMap( myHelper->GetMeshDS()->ShapeToIndex( *edgeIt ), isReverse ); + isReverse = ( edgeIt->Orientation() == TopAbs_REVERSED ); + double f = u2colMap.begin()->first, l = u2colMap.rbegin()->first; + if ( isReverse ) swap ( f, l ); + const int nbCol = 5; + for ( int i = 0; i < nbCol; ++i ) + { + double u = f + i/double(nbCol) * ( l - f ); + const TNodeColumn* col = & getColumn( & u2colMap, u )->second; + if ( columns.empty() || col != columns.back() ) + columns.push_back( col ); + } + } + } + + // Find tolerance to check transformations + + double tol2; + { + Bnd_B3d bndBox; + for ( int i = 0; i < columns.size(); ++i ) + bndBox.Add( gpXYZ( columns[i]->front() )); + tol2 = bndBox.SquareExtent() * 4 * 1e-4; + } + + // Compute transformations + + int xCol = -1; + gp_Trsf fromCsZ, toCs0; + gp_Ax3 cs0 = getLayerCoordSys(0, columns, xCol ); + //double dist0 = cs0.Location().Distance( gpXYZ( (*columns[0])[0])); + toCs0.SetTransformation( cs0 ); + for ( int z = 1; z < zSize-1; ++z ) + { + gp_Ax3 csZ = getLayerCoordSys(z, columns, xCol ); + //double distZ = csZ.Location().Distance( gpXYZ( (*columns[0])[z])); + fromCsZ.SetTransformation( csZ ); + fromCsZ.Invert(); + gp_Trsf& t = trsf[ z-1 ]; + t = fromCsZ * toCs0; + //t.SetScaleFactor( distZ/dist0 ); - it does not work properly, wrong base point + + // check a transformation + for ( int i = 0; i < columns.size(); ++i ) + { + gp_Pnt p0 = gpXYZ( (*columns[i])[0] ); + gp_Pnt pz = gpXYZ( (*columns[i])[z] ); + t.Transforms( p0.ChangeCoord() ); + if ( p0.SquareDistance( pz ) > tol2 ) + return false; + } + } + return true; +} + //================================================================================ /*! * \brief Check curve orientation of a bootom edge @@ -1467,14 +1739,14 @@ bool StdMeshers_PrismAsBlock::IsForwardEdge(SMESHDS_Mesh* meshDS, } //================================================================================ - /*! - * \brief Find wall faces by bottom edges - * \param mesh - the mesh - * \param mainShape - the prism - * \param bottomFace - the bottom face - * \param bottomEdges - edges bounding the bottom face - * \param wallFaces - faces list to fill in - */ +/*! + * \brief Find wall faces by bottom edges + * \param mesh - the mesh + * \param mainShape - the prism + * \param bottomFace - the bottom face + * \param bottomEdges - edges bounding the bottom face + * \param wallFaces - faces list to fill in + */ //================================================================================ bool StdMeshers_PrismAsBlock::GetWallFaces( SMESH_Mesh* mesh, @@ -1727,8 +1999,6 @@ double StdMeshers_PrismAsBlock::TSideFace::GetColumns(const double U, r = 0.5; } else { -// if ( !myIsForward ) -// std::swap( col1, col2 ); double uf = col1->first; double ul = col2->first; r = ( u - uf ) / ( ul - uf ); @@ -1748,8 +2018,8 @@ double StdMeshers_PrismAsBlock::TSideFace::GetColumns(const double U, gp_Pnt StdMeshers_PrismAsBlock::TSideFace::Value(const Standard_Real U, const Standard_Real V) const { - double u; if ( !myComponents.empty() ) { + double u; TSideFace * comp = GetComponent(U,u); return comp->Value( u, V ); } @@ -1761,7 +2031,41 @@ gp_Pnt StdMeshers_PrismAsBlock::TSideFace::Value(const Standard_Real U, const SMDS_MeshNode* n2 = 0; const SMDS_MeshNode* n3 = 0; const SMDS_MeshNode* n4 = 0; - gp_XYZ pnt; + + // BEGIN issue 0020680: EDF 1252 SMESH: Bad cell created by Radial prism in center of torus + // Workaround for a wrongly located point returned by mySurface.Value() for + // UV located near boundary of BSpline surface. + // To bypass the problem, we take point from 3D curve of edge. + // It solves pb of the bloc_fiss_new.py + const double tol = 1e-3; + if ( V < tol || V+tol >= 1. ) + { + n1 = V < tol ? u_col1->second.front() : u_col1->second.back(); + n3 = V < tol ? u_col2->second.front() : u_col2->second.back(); + TopoDS_Edge edge; + if ( V < tol ) + { + edge = myBaseEdge; + } + else + { + TopoDS_Shape s = myHelper->GetSubShapeByNode( n1, myHelper->GetMeshDS() ); + if ( s.ShapeType() != TopAbs_EDGE ) + s = myHelper->GetSubShapeByNode( n3, myHelper->GetMeshDS() ); + if ( s.ShapeType() == TopAbs_EDGE ) + edge = TopoDS::Edge( s ); + } + if ( !edge.IsNull() ) + { + double u1 = myHelper->GetNodeU( edge, n1 ); + double u3 = myHelper->GetNodeU( edge, n3 ); + double u = u1 * ( 1 - hR ) + u3 * hR; + TopLoc_Location loc; double f,l; + Handle(Geom_Curve) curve = BRep_Tool::Curve( edge,loc,f,l ); + return curve->Value( u ).Transformed( loc ); + } + } + // END issue 0020680: EDF 1252 SMESH: Bad cell created by Radial prism in center of torus vR = getRAndNodes( & u_col1->second, V, n1, n2 ); vR = getRAndNodes( & u_col2->second, V, n3, n4 ); @@ -1775,8 +2079,9 @@ gp_Pnt StdMeshers_PrismAsBlock::TSideFace::Value(const Standard_Real U, gp_XY uv34 = uv3 * ( 1 - vR ) + uv4 * vR; gp_XY uv = uv12 * ( 1 - hR ) + uv34 * hR; - - return mySurface.Value( uv.X(), uv.Y() ); + + gp_Pnt p = mySurface.Value( uv.X(), uv.Y() ); + return p; } @@ -1954,6 +2259,28 @@ int StdMeshers_PrismAsBlock::TSideFace::InsertSubShapes(TBlockShapes& shapeMap) return nbInserted; } +//================================================================================ +/*! + * \brief Dump ids of nodes of sides + */ +//================================================================================ + +void StdMeshers_PrismAsBlock::TSideFace::dumpNodes(int nbNodes) const +{ +#ifdef _DEBUG_ + cout << endl << "NODES OF FACE "; SMESH_Block::DumpShapeID( myID, cout ) << endl; + THorizontalEdgeAdaptor* hSize0 = (THorizontalEdgeAdaptor*) HorizCurve(0); + cout << "Horiz side 0: "; hSize0->dumpNodes(nbNodes); cout << endl; + THorizontalEdgeAdaptor* hSize1 = (THorizontalEdgeAdaptor*) HorizCurve(1); + cout << "Horiz side 1: "; hSize1->dumpNodes(nbNodes); cout << endl; + TVerticalEdgeAdaptor* vSide0 = (TVerticalEdgeAdaptor*) VertiCurve(0); + cout << "Verti side 0: "; vSide0->dumpNodes(nbNodes); cout << endl; + TVerticalEdgeAdaptor* vSide1 = (TVerticalEdgeAdaptor*) VertiCurve(1); + cout << "Verti side 1: "; vSide1->dumpNodes(nbNodes); cout << endl; + delete hSize0; delete hSize1; delete vSide0; delete vSide1; +#endif +} + //================================================================================ /*! * \brief Creates TVerticalEdgeAdaptor @@ -1984,6 +2311,22 @@ gp_Pnt StdMeshers_PrismAsBlock::TVerticalEdgeAdaptor::Value(const Standard_Real return gpXYZ(n1) * ( 1 - r ) + gpXYZ(n2) * r; } +//================================================================================ +/*! + * \brief Dump ids of nodes + */ +//================================================================================ + +void StdMeshers_PrismAsBlock::TVerticalEdgeAdaptor::dumpNodes(int nbNodes) const +{ +#ifdef _DEBUG_ + for ( int i = 0; i < nbNodes && i < myNodeColumn->size(); ++i ) + cout << (*myNodeColumn)[i]->GetID() << " "; + if ( nbNodes < myNodeColumn->size() ) + cout << myNodeColumn->back()->GetID(); +#endif +} + //================================================================================ /*! * \brief Return coordinates for the given normalized parameter @@ -1997,6 +2340,50 @@ gp_Pnt StdMeshers_PrismAsBlock::THorizontalEdgeAdaptor::Value(const Standard_Rea return mySide->TSideFace::Value( U, myV ); } +//================================================================================ +/*! + * \brief Dump ids of first nodes and the last one + */ +//================================================================================ + +void StdMeshers_PrismAsBlock::THorizontalEdgeAdaptor::dumpNodes(int nbNodes) const +{ +#ifdef _DEBUG_ + // Not bedugged code. Last node is sometimes incorrect + const TSideFace* side = mySide; + double u = 0; + if ( mySide->IsComplex() ) + side = mySide->GetComponent(0,u); + + TParam2ColumnIt col, col2; + TParam2ColumnMap* u2cols = side->GetColumns(); + side->GetColumns( u , col, col2 ); + + int j, i = myV ? mySide->ColumnHeight()-1 : 0; + + const SMDS_MeshNode* n = 0; + const SMDS_MeshNode* lastN + = side->IsForward() ? u2cols->rbegin()->second[ i ] : u2cols->begin()->second[ i ]; + for ( j = 0; j < nbNodes && n != lastN; ++j ) + { + n = col->second[ i ]; + cout << n->GetID() << " "; + if ( side->IsForward() ) + ++col; + else + --col; + } + + // last node + u = 1; + if ( mySide->IsComplex() ) + side = mySide->GetComponent(1,u); + + side->GetColumns( u , col, col2 ); + if ( n != col->second[ i ] ) + cout << col->second[ i ]->GetID(); +#endif +} //================================================================================ /*! * \brief Return UV on pcurve for the given normalized parameter diff --git a/src/StdMeshers/StdMeshers_Prism_3D.hxx b/src/StdMeshers/StdMeshers_Prism_3D.hxx index d258bb432..d7278e813 100644 --- a/src/StdMeshers/StdMeshers_Prism_3D.hxx +++ b/src/StdMeshers/StdMeshers_Prism_3D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Prism_3D.hxx // Module : SMESH @@ -46,6 +47,7 @@ #include #include #include +#include class SMESHDS_SubMesh; @@ -58,7 +60,7 @@ typedef std::vector TNodeColumn; // map of bottom nodes to the column of nodes above them // (the column includes the bottom nodes) -typedef std::map< TNode, TNodeColumn > TNode2ColumnMap; +typedef std::map< TNode, TNodeColumn > TNode2ColumnMap; typedef std::map< double, TNodeColumn > TParam2ColumnMap; typedef std::map< double, TNodeColumn >::const_iterator TParam2ColumnIt; @@ -73,11 +75,11 @@ typedef TopTools_IndexedMapOfOrientedShape TBlockShapes; struct TNode { const SMDS_MeshNode* myNode; - gp_XYZ myParams; + mutable gp_XYZ myParams; gp_XYZ GetCoords() const { return gp_XYZ( myNode->X(), myNode->Y(), myNode->Z() ); } gp_XYZ GetParams() const { return myParams; } - gp_XYZ& ChangeParams() { return myParams; } + gp_XYZ& ChangeParams() const { return myParams; } bool HasParams() const { return myParams.X() >= 0.0; } SMDS_TypeOfPosition GetPositionType() const { return myNode ? myNode->GetPosition()->GetTypeOfPosition() : SMDS_TOP_UNSPEC; } @@ -144,13 +146,20 @@ public: * \retval const TParam2ColumnMap& - map */ const TParam2ColumnMap& GetParam2ColumnMap(const int baseEdgeID, - bool & isReverse) + bool & isReverse) const { - std::pair< TParam2ColumnMap*, bool > & col_frw = - myShapeIndex2ColumnMap[ baseEdgeID ]; + std::pair< TParam2ColumnMap*, bool > col_frw = + myShapeIndex2ColumnMap.find( baseEdgeID )->second; isReverse = !col_frw.second; return * col_frw.first; } + + /*! + * \brief Return transformations to get coordinates of nodes of each internal layer + * by nodes of the bottom. Layer is a set of nodes at a certain step + * from bottom to top. + */ + bool GetLayersTransformation(std::vector & trsf) const; /*! * \brief Return pointer to mesh @@ -284,6 +293,8 @@ private: int InsertSubShapes( TBlockShapes& shapeMap ) const; // redefine Adaptor methods gp_Pnt Value(const Standard_Real U,const Standard_Real V) const; + // debug + void dumpNodes(int nbNodes) const; }; // -------------------------------------------------------------------- @@ -299,6 +310,8 @@ private: gp_Pnt Value(const Standard_Real U) const; Standard_Real FirstParameter() const { return 0; } Standard_Real LastParameter() const { return 1; } + // debug + void dumpNodes(int nbNodes) const; }; // -------------------------------------------------------------------- @@ -316,6 +329,8 @@ private: gp_Pnt Value(const Standard_Real U) const; Standard_Real FirstParameter() const { return 0; } Standard_Real LastParameter() const { return 1; } + // debug + void dumpNodes(int nbNodes) const; }; // -------------------------------------------------------------------- @@ -337,20 +352,19 @@ private: Standard_Real FirstParameter() const { return 0; } Standard_Real LastParameter() const { return 1; } }; - // -------------------------------------------------------------------- - bool myNotQuadOnTop; - SMESH_MesherHelper* myHelper; - TBlockShapes myShapeIDMap; + bool myNotQuadOnTop; + SMESH_MesherHelper* myHelper; + TBlockShapes myShapeIDMap; + SMESH_ComputeErrorPtr myError; // container of 4 side faces - TSideFace* mySide; + TSideFace* mySide; // node columns for each base edge - std::vector< TParam2ColumnMap > myParam2ColumnMaps; + std::vector< TParam2ColumnMap > myParam2ColumnMaps; // to find a column for a node by edge SMESHDS Index std::map< int, std::pair< TParam2ColumnMap*, bool > > myShapeIndex2ColumnMap; - SMESH_ComputeErrorPtr myError; /*! * \brief store error and comment and then return ( error == COMPERR_OK ) */ @@ -358,7 +372,6 @@ private: myError = SMESH_ComputeError::New(error,comment); return myError->IsOK(); } - //std::vector< SMESH_subMesh* > mySubMeshesVec; // submesh by in-block id }; // ============================================= @@ -432,7 +445,7 @@ private: StdMeshers_PrismAsBlock myBlock; SMESH_MesherHelper* myHelper; - std::vector myShapeXYZ; // point on each sub-shape + std::vector myShapeXYZ; // point on each sub-shape of the block // map of bottom nodes to the column of nodes above them // (the column includes the bottom node) diff --git a/src/StdMeshers/StdMeshers_ProjectionSource1D.cxx b/src/StdMeshers/StdMeshers_ProjectionSource1D.cxx index 9be958436..2fe95fa57 100644 --- a/src/StdMeshers/StdMeshers_ProjectionSource1D.cxx +++ b/src/StdMeshers/StdMeshers_ProjectionSource1D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's classes // File : StdMeshers_ProjectionSource1D.cxx // Author : Edward AGAPOV diff --git a/src/StdMeshers/StdMeshers_ProjectionSource1D.hxx b/src/StdMeshers/StdMeshers_ProjectionSource1D.hxx index 301dedf30..0f0549a8d 100644 --- a/src/StdMeshers/StdMeshers_ProjectionSource1D.hxx +++ b/src/StdMeshers/StdMeshers_ProjectionSource1D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's calsses // File : StdMeshers_ProjectionSource1D.hxx // Author : Edward AGAPOV diff --git a/src/StdMeshers/StdMeshers_ProjectionSource2D.cxx b/src/StdMeshers/StdMeshers_ProjectionSource2D.cxx index be0d809eb..068346f52 100644 --- a/src/StdMeshers/StdMeshers_ProjectionSource2D.cxx +++ b/src/StdMeshers/StdMeshers_ProjectionSource2D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,11 +19,12 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's classes // File : StdMeshers_ProjectionSource2D.cxx // Author : Edward AGAPOV // Module : SMESH - +// #include "StdMeshers_ProjectionSource2D.hxx" #include "SMESH_Mesh.hxx" diff --git a/src/StdMeshers/StdMeshers_ProjectionSource2D.hxx b/src/StdMeshers/StdMeshers_ProjectionSource2D.hxx index a23d4c494..5f973bcaa 100644 --- a/src/StdMeshers/StdMeshers_ProjectionSource2D.hxx +++ b/src/StdMeshers/StdMeshers_ProjectionSource2D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,11 +19,12 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's calsses // File : StdMeshers_ProjectionSource2D.hxx // Author : Edward AGAPOV // Module : SMESH - +// #ifndef _SMESH_ProjectionSource2D_HXX_ #define _SMESH_ProjectionSource2D_HXX_ diff --git a/src/StdMeshers/StdMeshers_ProjectionSource3D.cxx b/src/StdMeshers/StdMeshers_ProjectionSource3D.cxx index 4a8aa1086..c7b404d14 100644 --- a/src/StdMeshers/StdMeshers_ProjectionSource3D.cxx +++ b/src/StdMeshers/StdMeshers_ProjectionSource3D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,11 +19,12 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's classes // File : StdMeshers_ProjectionSource3D.cxx // Author : Edward AGAPOV // Module : SMESH - +// #include "StdMeshers_ProjectionSource3D.hxx" #include "utilities.h" diff --git a/src/StdMeshers/StdMeshers_ProjectionSource3D.hxx b/src/StdMeshers/StdMeshers_ProjectionSource3D.hxx index fd6848aec..ce37bac82 100644 --- a/src/StdMeshers/StdMeshers_ProjectionSource3D.hxx +++ b/src/StdMeshers/StdMeshers_ProjectionSource3D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,11 +19,12 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's calsses // File : StdMeshers_ProjectionSource3D.hxx // Author : Edward AGAPOV // Module : SMESH - +// #ifndef _SMESH_ProjectionSource3D_HXX_ #define _SMESH_ProjectionSource3D_HXX_ diff --git a/src/StdMeshers/StdMeshers_ProjectionUtils.cxx b/src/StdMeshers/StdMeshers_ProjectionUtils.cxx index a964b99c9..c2dcb0c29 100644 --- a/src/StdMeshers/StdMeshers_ProjectionUtils.cxx +++ b/src/StdMeshers/StdMeshers_ProjectionUtils.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's calsses // File : StdMeshers_ProjectionUtils.cxx // Created : Fri Oct 27 10:24:28 2006 @@ -1283,44 +1284,6 @@ bool StdMeshers_ProjectionUtils::InsertAssociation( const TopoDS_Shape& theShape return false; } -//======================================================================= -//function : IsSubShape -//purpose : -//======================================================================= - -bool StdMeshers_ProjectionUtils::IsSubShape( const TopoDS_Shape& shape, - SMESH_Mesh* aMesh ) -{ - if ( shape.IsNull() || !aMesh ) - return false; - return - aMesh->GetMeshDS()->ShapeToIndex( shape ) || - // PAL16202 - shape.ShapeType() == TopAbs_COMPOUND && aMesh->GetMeshDS()->IsGroupOfSubShapes( shape ); -} - -//======================================================================= -//function : IsSubShape -//purpose : -//======================================================================= - -bool StdMeshers_ProjectionUtils::IsSubShape( const TopoDS_Shape& shape, - const TopoDS_Shape& mainShape ) -{ - if ( !shape.IsNull() && !mainShape.IsNull() ) - { - for ( TopExp_Explorer exp( mainShape, shape.ShapeType()); - exp.More(); - exp.Next() ) - if ( shape.IsSame( exp.Current() )) - return true; - } - SCRUTE((shape.IsNull())); - SCRUTE((mainShape.IsNull())); - return false; -} - - //======================================================================= /*! * \brief Finds an edge by its vertices in a main shape of the mesh @@ -1536,7 +1499,7 @@ FindMatchingNodesOnFaces( const TopoDS_Face& face1, if ( !assocMap.IsBound( e2 )) RETURN_BAD_RESULT("Association not found for edge " << meshDS2->ShapeToIndex( e2 )); TopoDS_Edge e1 = TopoDS::Edge( assocMap( e2 )); - if ( !IsSubShape( e1, face1 )) + if ( !helper1.IsSubShape( e1, face1 )) RETURN_BAD_RESULT("Wrong association, edge " << meshDS1->ShapeToIndex( e1 ) << " isn't a subshape of face " << meshDS1->ShapeToIndex( face1 )); // check that there are nodes on edges diff --git a/src/StdMeshers/StdMeshers_ProjectionUtils.hxx b/src/StdMeshers/StdMeshers_ProjectionUtils.hxx index dab575503..6a657e55d 100644 --- a/src/StdMeshers/StdMeshers_ProjectionUtils.hxx +++ b/src/StdMeshers/StdMeshers_ProjectionUtils.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : idl implementation based on 'SMESH' unit's calsses // File : StdMeshers_ProjectionUtils.hxx // Created : Thu Oct 26 15:37:24 2006 @@ -111,10 +112,6 @@ class StdMeshers_ProjectionUtils TShapeShapeMap & theAssociationMap, const bool theBidirectional=true); - static bool IsSubShape( const TopoDS_Shape& shape, SMESH_Mesh* aMesh ); - - static bool IsSubShape( const TopoDS_Shape& shape, const TopoDS_Shape& mainShape ); - /*! * \brief Finds an edge by its vertices in a main shape of the mesh */ diff --git a/src/StdMeshers/StdMeshers_Projection_1D.cxx b/src/StdMeshers/StdMeshers_Projection_1D.cxx index df55fc267..1a2b67fcd 100644 --- a/src/StdMeshers/StdMeshers_Projection_1D.cxx +++ b/src/StdMeshers/StdMeshers_Projection_1D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Projection_1D.cxx // Module : SMESH @@ -67,7 +68,7 @@ StdMeshers_Projection_1D::StdMeshers_Projection_1D(int hypId, int studyId, SMESH :SMESH_1D_Algo(hypId, studyId, gen) { _name = "Projection_1D"; - _shapeType = (1 << TopAbs_EDGE); // 1 bit per shape type + _shapeType = (1 << TopAbs_EDGE); // 1 bit per shape type _compatibleHypothesis.push_back("ProjectionSource1D"); _sourceHypo = 0; @@ -128,25 +129,25 @@ bool StdMeshers_Projection_1D::CheckHypothesis(SMESH_Mesh& if ( _sourceHypo->HasVertexAssociation() ) { // source and target vertices - if ( !TAssocTool::IsSubShape( _sourceHypo->GetSourceVertex(), srcMesh ) || - !TAssocTool::IsSubShape( _sourceHypo->GetTargetVertex(), tgtMesh ) || - !TAssocTool::IsSubShape( _sourceHypo->GetSourceVertex(), - _sourceHypo->GetSourceEdge() )) + if ( !SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSourceVertex(), srcMesh ) || + !SMESH_MesherHelper::IsSubShape( _sourceHypo->GetTargetVertex(), tgtMesh ) || + !SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSourceVertex(), + _sourceHypo->GetSourceEdge() )) { aStatus = HYP_BAD_PARAMETER; - SCRUTE((TAssocTool::IsSubShape( _sourceHypo->GetSourceVertex(), srcMesh ))); - SCRUTE((TAssocTool::IsSubShape( _sourceHypo->GetTargetVertex(), tgtMesh ))); - SCRUTE((TAssocTool::IsSubShape( _sourceHypo->GetSourceVertex(), - _sourceHypo->GetSourceEdge() ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSourceVertex(), srcMesh ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( _sourceHypo->GetTargetVertex(), tgtMesh ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSourceVertex(), + _sourceHypo->GetSourceEdge() ))); } // PAL16202 - else + else { - bool isSub = TAssocTool::IsSubShape( _sourceHypo->GetTargetVertex(), aShape ); + bool isSub = SMESH_MesherHelper::IsSubShape( _sourceHypo->GetTargetVertex(), aShape ); if ( !_sourceHypo->IsCompoundSource() ) { if ( !isSub ) { aStatus = HYP_BAD_PARAMETER; - SCRUTE((TAssocTool::IsSubShape( _sourceHypo->GetTargetVertex(), aShape))); + SCRUTE((SMESH_MesherHelper::IsSubShape( _sourceHypo->GetTargetVertex(), aShape))); } } else if ( isSub ) { @@ -159,7 +160,7 @@ bool StdMeshers_Projection_1D::CheckHypothesis(SMESH_Mesh& { const TopoDS_Shape& ancestor = ancestIt.Value(); if ( ancestor.ShapeType() == TopAbs_EDGE && - TAssocTool::IsSubShape( ancestor, _sourceHypo->GetSourceEdge() )) + SMESH_MesherHelper::IsSubShape( ancestor, _sourceHypo->GetSourceEdge() )) { if ( sharingEdge.IsNull() || ancestor.IsSame( sharingEdge )) sharingEdge = ancestor; @@ -175,11 +176,11 @@ bool StdMeshers_Projection_1D::CheckHypothesis(SMESH_Mesh& } } // check source edge - if ( !TAssocTool::IsSubShape( _sourceHypo->GetSourceEdge(), srcMesh ) || + if ( !SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSourceEdge(), srcMesh ) || ( srcMesh == tgtMesh && aShape == _sourceHypo->GetSourceEdge() )) { aStatus = HYP_BAD_PARAMETER; - SCRUTE((TAssocTool::IsSubShape( _sourceHypo->GetSourceEdge(), srcMesh ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSourceEdge(), srcMesh ))); SCRUTE((srcMesh == tgtMesh)); SCRUTE(( aShape == _sourceHypo->GetSourceEdge() )); } @@ -379,8 +380,8 @@ bool StdMeshers_Projection_1D::Compute(SMESH_Mesh& theMesh, const TopoDS_Shape& //======================================================================= bool StdMeshers_Projection_1D::Evaluate(SMESH_Mesh& theMesh, - const TopoDS_Shape& theShape, - MapShapeNbElems& aResMap) + const TopoDS_Shape& theShape, + MapShapeNbElems& aResMap) { if ( !_sourceHypo ) return false; @@ -390,7 +391,7 @@ bool StdMeshers_Projection_1D::Evaluate(SMESH_Mesh& theMesh, if ( !srcMesh ) srcMesh = tgtMesh; - SMESHDS_Mesh * meshDS = theMesh.GetMeshDS(); + //SMESHDS_Mesh * meshDS = theMesh.GetMeshDS(); // --------------------------- // Make subshapes association @@ -433,8 +434,8 @@ bool StdMeshers_Projection_1D::Evaluate(SMESH_Mesh& theMesh, // Find out nodes distribution on the source edge // ----------------------------------------------- - double srcLength = EdgeLength( srcEdge ); - double tgtLength = EdgeLength( tgtEdge ); + //double srcLength = EdgeLength( srcEdge ); + //double tgtLength = EdgeLength( tgtEdge ); vector< double > params; // sorted parameters of nodes on the source edge if ( !SMESH_Algo::GetNodeParamOnEdge( srcMesh->GetMeshDS(), srcEdge, params )) diff --git a/src/StdMeshers/StdMeshers_Projection_1D.hxx b/src/StdMeshers/StdMeshers_Projection_1D.hxx index be003ed7b..e188bf227 100644 --- a/src/StdMeshers/StdMeshers_Projection_1D.hxx +++ b/src/StdMeshers/StdMeshers_Projection_1D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Projection_1D.hxx // Module : SMESH diff --git a/src/StdMeshers/StdMeshers_Projection_2D.cxx b/src/StdMeshers/StdMeshers_Projection_2D.cxx index 63b843d32..7af5ee189 100644 --- a/src/StdMeshers/StdMeshers_Projection_2D.cxx +++ b/src/StdMeshers/StdMeshers_Projection_2D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Projection_2D.cxx // Module : SMESH @@ -50,6 +51,8 @@ #include #include #include +#include +#include using namespace std; @@ -67,7 +70,7 @@ StdMeshers_Projection_2D::StdMeshers_Projection_2D(int hypId, int studyId, SMESH :SMESH_2D_Algo(hypId, studyId, gen) { _name = "Projection_2D"; - _shapeType = (1 << TopAbs_FACE); // 1 bit per shape type + _shapeType = (1 << TopAbs_FACE); // 1 bit per shape type _compatibleHypothesis.push_back("ProjectionSource2D"); _sourceHypo = 0; @@ -130,40 +133,40 @@ bool StdMeshers_Projection_2D::CheckHypothesis(SMESH_Mesh& TopoDS_Shape edge = TAssocTool::GetEdgeByVertices ( srcMesh, _sourceHypo->GetSourceVertex(1), _sourceHypo->GetSourceVertex(2) ); if ( edge.IsNull() || - !TAssocTool::IsSubShape( edge, srcMesh ) || - !TAssocTool::IsSubShape( edge, _sourceHypo->GetSourceFace() )) + !SMESH_MesherHelper::IsSubShape( edge, srcMesh ) || + !SMESH_MesherHelper::IsSubShape( edge, _sourceHypo->GetSourceFace() )) { theStatus = HYP_BAD_PARAMETER; SCRUTE((edge.IsNull())); - SCRUTE((TAssocTool::IsSubShape( edge, srcMesh ))); - SCRUTE((TAssocTool::IsSubShape( edge, _sourceHypo->GetSourceFace() ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( edge, srcMesh ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( edge, _sourceHypo->GetSourceFace() ))); } else { // target vertices edge = TAssocTool::GetEdgeByVertices ( tgtMesh, _sourceHypo->GetTargetVertex(1), _sourceHypo->GetTargetVertex(2) ); - if ( edge.IsNull() || !TAssocTool::IsSubShape( edge, tgtMesh )) + if ( edge.IsNull() || !SMESH_MesherHelper::IsSubShape( edge, tgtMesh )) { theStatus = HYP_BAD_PARAMETER; SCRUTE((edge.IsNull())); - SCRUTE((TAssocTool::IsSubShape( edge, tgtMesh ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( edge, tgtMesh ))); } // PAL16203 else if ( !_sourceHypo->IsCompoundSource() && - !TAssocTool::IsSubShape( edge, theShape )) + !SMESH_MesherHelper::IsSubShape( edge, theShape )) { theStatus = HYP_BAD_PARAMETER; - SCRUTE((TAssocTool::IsSubShape( edge, theShape ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( edge, theShape ))); } } } // check a source face - if ( !TAssocTool::IsSubShape( _sourceHypo->GetSourceFace(), srcMesh ) || + if ( !SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSourceFace(), srcMesh ) || ( srcMesh == tgtMesh && theShape == _sourceHypo->GetSourceFace() )) { theStatus = HYP_BAD_PARAMETER; - SCRUTE((TAssocTool::IsSubShape( _sourceHypo->GetSourceFace(), srcMesh ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSourceFace(), srcMesh ))); SCRUTE((srcMesh == tgtMesh)); SCRUTE(( theShape == _sourceHypo->GetSourceFace() )); } @@ -177,12 +180,11 @@ bool StdMeshers_Projection_2D::CheckHypothesis(SMESH_Mesh& namespace { - //================================================================================ /*! * \brief define if a node is new or old - * \param node - node to check - * \retval bool - true if the node existed before Compute() is called + * \param node - node to check + * \retval bool - true if the node existed before Compute() is called */ //================================================================================ @@ -356,7 +358,8 @@ namespace { //================================================================================ /*! - * \brief Preform projection in case if tgtFace.IsPartner( srcFace ) + * \brief Preform projection in case if tgtFace.IsPartner( srcFace ) and in case + * if projection by transformation is possible * \param tgtFace - target face * \param srcFace - source face * \param tgtMesh - target mesh @@ -371,8 +374,96 @@ namespace { SMESH_Mesh * srcMesh, const TAssocTool::TShapeShapeMap& shape2ShapeMap) { - if ( !tgtFace.IsPartner( srcFace )) - return false; + const double tol = 1e-6; + + gp_Trsf trsf; // transformation to get location of target nodes from source ones + if ( tgtFace.IsPartner( srcFace )) + { + gp_Trsf srcTrsf = srcFace.Location(); + gp_Trsf tgtTrsf = tgtFace.Location(); + trsf = srcTrsf.Inverted() * tgtTrsf; + } + else + { + // Try to find the transformation + + // make any local coord systems of src and tgt faces + vector srcPP, tgtPP; // 3 points on face boundaries to make axes of CS + SMESH_subMesh * srcSM = srcMesh->GetSubMesh( srcFace ); + SMESH_subMeshIteratorPtr smIt = srcSM->getDependsOnIterator(/*includeSelf=*/false,false); + srcSM = smIt->next(); // sm of a vertex + while ( smIt->more() && srcPP.size() < 3 ) + { + srcSM = smIt->next(); + SMESHDS_SubMesh* srcSmds = srcSM->GetSubMeshDS(); + if ( !srcSmds ) continue; + SMDS_NodeIteratorPtr nIt = srcSmds->GetNodes(); + while ( nIt->more() ) + { + SMESH_MeshEditor::TNodeXYZ p ( nIt->next()); + bool pOK = false; + switch ( srcPP.size() ) + { + case 0: pOK = true; break; + + case 1: pOK = ( srcPP[0].SquareDistance( p ) > tol ); break; + + case 2: + { + gp_Vec p0p1( srcPP[0], srcPP[1] ), p0p( srcPP[0], p ); + pOK = !p0p1.IsParallel( p0p, tol ); + break; + } + } + if ( !pOK ) + continue; + + // find corresponding point on target shape + pOK = false; + gp_Pnt tgtP; + const TopoDS_Shape& tgtShape = shape2ShapeMap( srcSM->GetSubShape() ); + if ( tgtShape.ShapeType() == TopAbs_VERTEX ) + { + tgtP = BRep_Tool::Pnt( TopoDS::Vertex( tgtShape )); + pOK = true; + //cout << "V - nS " << p._node->GetID() << " - nT " << SMESH_Algo::VertexNode(TopoDS::Vertex( tgtShape),tgtMesh->GetMeshDS())->GetID() << endl; + } + else if ( tgtPP.size() > 0 ) + { + if ( SMESHDS_SubMesh* tgtSmds = tgtMesh->GetMeshDS()->MeshElements( tgtShape )) + { + double srcDist = srcPP[0].Distance( p ); + double eTol = BRep_Tool::Tolerance( TopoDS::Edge( tgtShape )); + SMDS_NodeIteratorPtr nItT = tgtSmds->GetNodes(); + while ( nItT->more() && !pOK ) + { + const SMDS_MeshNode* n = nItT->next(); + tgtP = SMESH_MeshEditor::TNodeXYZ( n ); + pOK = ( fabs( srcDist - tgtPP[0].Distance( tgtP )) < 2*eTol ); + //cout << "E - nS " << p._node->GetID() << " - nT " << n->GetID()<< " OK - " << pOK<< " " << fabs( srcDist - tgtPP[0].Distance( tgtP ))<< " tol " << eTol<< endl; + } + } + } + if ( !pOK ) + continue; + + srcPP.push_back( p ); + tgtPP.push_back( tgtP ); + } + } + if ( srcPP.size() != 3 ) + return false; + + // make transformation + gp_Trsf fromTgtCS, toSrcCS; // from/to global CS + gp_Ax2 srcCS( srcPP[0], gp_Vec( srcPP[0], srcPP[1] ), gp_Vec( srcPP[0], srcPP[2])); + gp_Ax2 tgtCS( tgtPP[0], gp_Vec( tgtPP[0], tgtPP[1] ), gp_Vec( tgtPP[0], tgtPP[2])); + toSrcCS .SetTransformation( gp_Ax3( srcCS )); + fromTgtCS.SetTransformation( gp_Ax3( tgtCS )); + fromTgtCS.Invert(); + + trsf = fromTgtCS * toSrcCS; + } // Fill map of src to tgt nodes with nodes on edges @@ -382,8 +473,6 @@ namespace { for ( TopExp_Explorer srcEdge( srcFace, TopAbs_EDGE); srcEdge.More(); srcEdge.Next() ) { const TopoDS_Shape& tgtEdge = shape2ShapeMap( srcEdge.Current() ); - if ( !tgtEdge.IsPartner( srcEdge.Current() )) - return false; map< double, const SMDS_MeshNode* > srcNodes, tgtNodes; if ( !SMESH_Algo::GetSortedNodesOnEdge( srcMesh->GetMeshDS(), @@ -399,6 +488,30 @@ namespace { srcNodes.size() != tgtNodes.size()) return false; + if ( !tgtEdge.IsPartner( srcEdge.Current() )) + { + // check that transormation is OK by three nodes + gp_Pnt p0S = SMESH_MeshEditor::TNodeXYZ( (srcNodes.begin()) ->second); + gp_Pnt p1S = SMESH_MeshEditor::TNodeXYZ( (srcNodes.rbegin()) ->second); + gp_Pnt p2S = SMESH_MeshEditor::TNodeXYZ( (++srcNodes.begin())->second); + + gp_Pnt p0T = SMESH_MeshEditor::TNodeXYZ( (tgtNodes.begin()) ->second); + gp_Pnt p1T = SMESH_MeshEditor::TNodeXYZ( (tgtNodes.rbegin()) ->second); + gp_Pnt p2T = SMESH_MeshEditor::TNodeXYZ( (++tgtNodes.begin())->second); + + // transform source points, they must coinside with target ones + if ( p0T.SquareDistance( p0S.Transformed( trsf )) > tol || + p1T.SquareDistance( p1S.Transformed( trsf )) > tol || + p2T.SquareDistance( p2S.Transformed( trsf )) > tol ) + { + //cout << "KO trsf, 3 dist: " + //<< p0T.SquareDistance( p0S.Transformed( trsf ))<< ", " + //<< p1T.SquareDistance( p1S.Transformed( trsf ))<< ", " + //<< p2T.SquareDistance( p2S.Transformed( trsf ))<< ", "<::iterator u_tn = tgtNodes.begin(); map< double, const SMDS_MeshNode* >::iterator u_sn = srcNodes.begin(); for ( ; u_tn != tgtNodes.end(); ++u_tn, ++u_sn) @@ -407,11 +520,6 @@ namespace { // Make new faces - // transformation to get location of target nodes from source ones - gp_Trsf srcTrsf = srcFace.Location(); - gp_Trsf tgtTrsf = tgtFace.Location(); - gp_Trsf trsf = srcTrsf.Inverted() * tgtTrsf; - // prepare the helper adding quadratic elements if necessary SMESH_MesherHelper helper( *tgtMesh ); helper.IsQuadraticSubMesh( tgtFace ); @@ -545,9 +653,9 @@ bool StdMeshers_Projection_2D::Compute(SMESH_Mesh& theMesh, const TopoDS_Shape& RETURN_BAD_RESULT("Not associated vertices, srcV1 " << srcV1.TShape().operator->() ); TopoDS_Vertex tgtV1 = TopoDS::Vertex( shape2ShapeMap( srcV1 )); - if ( !TAssocTool::IsSubShape( srcV1, srcFace )) + if ( !SMESH_MesherHelper::IsSubShape( srcV1, srcFace )) RETURN_BAD_RESULT("Wrong srcV1 " << srcV1.TShape().operator->()); - if ( !TAssocTool::IsSubShape( tgtV1, tgtFace )) + if ( !SMESH_MesherHelper::IsSubShape( tgtV1, tgtFace )) RETURN_BAD_RESULT("Wrong tgtV1 " << tgtV1.TShape().operator->()); // try to find out orientation by order of edges @@ -748,8 +856,8 @@ bool StdMeshers_Projection_2D::Compute(SMESH_Mesh& theMesh, const TopoDS_Shape& //======================================================================= bool StdMeshers_Projection_2D::Evaluate(SMESH_Mesh& theMesh, - const TopoDS_Shape& theShape, - MapShapeNbElems& aResMap) + const TopoDS_Shape& theShape, + MapShapeNbElems& aResMap) { if ( !_sourceHypo ) return false; diff --git a/src/StdMeshers/StdMeshers_Projection_2D.hxx b/src/StdMeshers/StdMeshers_Projection_2D.hxx index 26506e81a..01eb80b9d 100644 --- a/src/StdMeshers/StdMeshers_Projection_2D.hxx +++ b/src/StdMeshers/StdMeshers_Projection_2D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Projection_2D.hxx // Module : SMESH diff --git a/src/StdMeshers/StdMeshers_Projection_3D.cxx b/src/StdMeshers/StdMeshers_Projection_3D.cxx index d8939fead..e30980e32 100644 --- a/src/StdMeshers/StdMeshers_Projection_3D.cxx +++ b/src/StdMeshers/StdMeshers_Projection_3D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Projection_3D.cxx // Module : SMESH @@ -141,12 +142,12 @@ bool StdMeshers_Projection_3D::CheckHypothesis(SMESH_Mesh& TopoDS_Shape edge = TAssocTool::GetEdgeByVertices ( srcMesh, _sourceHypo->GetSourceVertex(1), _sourceHypo->GetSourceVertex(2) ); if ( edge.IsNull() || - !TAssocTool::IsSubShape( edge, srcMesh ) || - !TAssocTool::IsSubShape( edge, _sourceHypo->GetSource3DShape() )) + !SMESH_MesherHelper::IsSubShape( edge, srcMesh ) || + !SMESH_MesherHelper::IsSubShape( edge, _sourceHypo->GetSource3DShape() )) { SCRUTE((edge.IsNull())); - SCRUTE((TAssocTool::IsSubShape( edge, srcMesh ))); - SCRUTE((TAssocTool::IsSubShape( edge, _sourceHypo->GetSource3DShape() ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( edge, srcMesh ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( edge, _sourceHypo->GetSource3DShape() ))); aStatus = SMESH_Hypothesis::HYP_BAD_PARAMETER; } else @@ -155,21 +156,21 @@ bool StdMeshers_Projection_3D::CheckHypothesis(SMESH_Mesh& edge = TAssocTool::GetEdgeByVertices ( tgtMesh, _sourceHypo->GetTargetVertex(1), _sourceHypo->GetTargetVertex(2) ); if ( edge.IsNull() || - !TAssocTool::IsSubShape( edge, tgtMesh ) || - !TAssocTool::IsSubShape( edge, aShape )) + !SMESH_MesherHelper::IsSubShape( edge, tgtMesh ) || + !SMESH_MesherHelper::IsSubShape( edge, aShape )) { SCRUTE((edge.IsNull())); - SCRUTE((TAssocTool::IsSubShape( edge, tgtMesh ))); - SCRUTE((TAssocTool::IsSubShape( edge, aShape ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( edge, tgtMesh ))); + SCRUTE((SMESH_MesherHelper::IsSubShape( edge, aShape ))); aStatus = SMESH_Hypothesis::HYP_BAD_PARAMETER; } } } // check a source shape - if ( !TAssocTool::IsSubShape( _sourceHypo->GetSource3DShape(), srcMesh ) || + if ( !SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSource3DShape(), srcMesh ) || ( srcMesh == tgtMesh && aShape == _sourceHypo->GetSource3DShape())) { - SCRUTE((TAssocTool::IsSubShape( _sourceHypo->GetSource3DShape(), srcMesh))); + SCRUTE((SMESH_MesherHelper::IsSubShape( _sourceHypo->GetSource3DShape(), srcMesh))); SCRUTE((srcMesh == tgtMesh)); SCRUTE((aShape == _sourceHypo->GetSource3DShape())); aStatus = SMESH_Hypothesis::HYP_BAD_PARAMETER; @@ -266,8 +267,8 @@ bool StdMeshers_Projection_3D::Compute(SMESH_Mesh& aMesh, const TopoDS_Shape& aS return error("Association of subshapes failed" ); srcV000 = TopoDS::Vertex( shape2ShapeMap( tgtV000 )); srcV100 = TopoDS::Vertex( shape2ShapeMap( tgtV100 )); - if ( !TAssocTool::IsSubShape( srcV000, srcShell ) || - !TAssocTool::IsSubShape( srcV100, srcShell )) + if ( !SMESH_MesherHelper::IsSubShape( srcV000, srcShell ) || + !SMESH_MesherHelper::IsSubShape( srcV100, srcShell )) return error("Incorrect association of subshapes" ); } diff --git a/src/StdMeshers/StdMeshers_Projection_3D.hxx b/src/StdMeshers/StdMeshers_Projection_3D.hxx index 8f9554509..68aed3780 100644 --- a/src/StdMeshers/StdMeshers_Projection_3D.hxx +++ b/src/StdMeshers/StdMeshers_Projection_3D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Projection_3D.hxx // Module : SMESH diff --git a/src/StdMeshers/StdMeshers_Propagation.cxx b/src/StdMeshers/StdMeshers_Propagation.cxx index c6b9b015f..8b88ce99a 100644 --- a/src/StdMeshers/StdMeshers_Propagation.cxx +++ b/src/StdMeshers/StdMeshers_Propagation.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,10 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Propagation.cxx // Module : SMESH - +// #include "StdMeshers_Propagation.hxx" #include "utilities.h" diff --git a/src/StdMeshers/StdMeshers_Propagation.hxx b/src/StdMeshers/StdMeshers_Propagation.hxx index b02f9aebe..c2689d27c 100644 --- a/src/StdMeshers/StdMeshers_Propagation.hxx +++ b/src/StdMeshers/StdMeshers_Propagation.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,10 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Propagation.hxx // Module : SMESH - +// #ifndef _SMESH_PROPAGATION_HXX_ #define _SMESH_PROPAGATION_HXX_ diff --git a/src/StdMeshers/StdMeshers_QuadToTriaAdaptor.cxx b/src/StdMeshers/StdMeshers_QuadToTriaAdaptor.cxx index fcd7afd08..1ca7e5b12 100644 --- a/src/StdMeshers/StdMeshers_QuadToTriaAdaptor.cxx +++ b/src/StdMeshers/StdMeshers_QuadToTriaAdaptor.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_QuadToTriaAdaptor.cxx // Module : SMESH @@ -27,32 +25,27 @@ // #include "StdMeshers_QuadToTriaAdaptor.hxx" -#include #include #include #include #include -#include +#include +#include #include #include #include #include #include -#include -typedef NCollection_Array1 StdMeshers_Array1OfSequenceOfInteger; - +#include -//======================================================================= -//function : StdMeshers_QuadToTriaAdaptor -//purpose : -//======================================================================= +using namespace std; -StdMeshers_QuadToTriaAdaptor::StdMeshers_QuadToTriaAdaptor() -{ -} +enum EQuadNature { NOT_QUAD, QUAD, DEGEN_QUAD }; + // sdt-like iterator used to get coordinates of nodes of mesh element +typedef SMDS_StdIterator< SMESH_MeshEditor::TNodeXYZ, SMDS_ElemIteratorPtr > TXyzIterator; //================================================================================ /*! @@ -63,26 +56,26 @@ StdMeshers_QuadToTriaAdaptor::StdMeshers_QuadToTriaAdaptor() StdMeshers_QuadToTriaAdaptor::~StdMeshers_QuadToTriaAdaptor() { // delete temporary faces - map< const SMDS_MeshElement*, list >::iterator - f_f = myResMap.begin(), ffEnd = myResMap.end(); + TQuad2Trias::iterator f_f = myResMap.begin(), ffEnd = myResMap.end(); for ( ; f_f != ffEnd; ++f_f ) { - list& fList = f_f->second; - list::iterator f = fList.begin(), fEnd = fList.end(); + TTriaList& fList = f_f->second; + TTriaList::iterator f = fList.begin(), fEnd = fList.end(); for ( ; f != fEnd; ++f ) delete *f; } myResMap.clear(); -// TF2PyramMap::iterator itp = myMapFPyram.begin(); -// for(; itp!=myMapFPyram.end(); itp++) +// TF2PyramMap::iterator itp = myPyram2Trias.begin(); +// for(; itp!=myPyram2Trias.end(); itp++) // cout << itp->second << endl; } //======================================================================= //function : FindBestPoint -//purpose : Auxilare for Compute() +//purpose : Return a point P laying on the line (PC,V) so that triangle +// (P, P1, P2) to be equilateral as much as possible // V - normal to (P1,P2,PC) //======================================================================= static gp_Pnt FindBestPoint(const gp_Pnt& P1, const gp_Pnt& P2, @@ -94,11 +87,10 @@ static gp_Pnt FindBestPoint(const gp_Pnt& P1, const gp_Pnt& P2, if( a < (b+c)/2 ) return PC; else { - // find shift along V in order to a became equal to (b+c)/2 + // find shift along V in order a to became equal to (b+c)/2 double shift = sqrt( a*a + (b*b-c*c)*(b*b-c*c)/16/a/a - (b*b+c*c)/2 ); gp_Dir aDir(V); - gp_Pnt Pbest( PC.X() + aDir.X()*shift, PC.Y() + aDir.Y()*shift, - PC.Z() + aDir.Z()*shift ); + gp_Pnt Pbest = PC.XYZ() + aDir.XYZ() * shift; return Pbest; } } @@ -183,6 +175,7 @@ static bool HasIntersection3(const gp_Pnt& P, const gp_Pnt& PC, gp_Pnt& Pint, //function : HasIntersection //purpose : Auxilare for CheckIntersection() //======================================================================= + static bool HasIntersection(const gp_Pnt& P, const gp_Pnt& PC, gp_Pnt& Pint, Handle(TColgp_HSequenceOfPnt)& aContour) { @@ -262,78 +255,53 @@ bool StdMeshers_QuadToTriaAdaptor::CheckIntersection //======================================================================= -//function : CompareTrias +//function : EqualTriangles //purpose : Auxilare for Compute() //======================================================================= -static bool CompareTrias(const SMDS_MeshElement* F1,const SMDS_MeshElement* F2) +static bool EqualTriangles(const SMDS_MeshElement* F1,const SMDS_MeshElement* F2) { return ( F1->GetNode(1)==F2->GetNode(2) && F1->GetNode(2)==F2->GetNode(1) ) || ( F1->GetNode(1)==F2->GetNode(1) && F1->GetNode(2)==F2->GetNode(2) ); } +//================================================================================ +/*! + * \brief Prepare data for the given face + * \param PN - coordinates of face nodes + * \param VN - cross products of vectors (PC-PN(i)) ^ (PC-PN(i+1)) + * \param FNodes - face nodes + * \param PC - gravity center of nodes + * \param VNorm - face normal (sum of VN) + * \param volumes - two volumes sharing the given face, the first is in VNorm direction + * \retval int - 0 if given face is not quad, + * 1 if given face is quad, + * 2 if given face is degenerate quad (two nodes are coincided) + */ +//================================================================================ -//======================================================================= -//function : IsDegenarate -//purpose : Auxilare for Preparation() -//======================================================================= -// static int IsDegenarate(const Handle(TColgp_HArray1OfPnt)& PN) -// { -// int i = 1; -// for(; i<4; i++) { -// int j = i+1; -// for(; j<=4; j++) { -// if( PN->Value(i).Distance(PN->Value(j)) < 1.e-6 ) -// return j; -// } -// } -// return 0; -// } - - -//======================================================================= -//function : Preparation -//purpose : Auxilare for Compute() -// : Return 0 if given face is not quad, -// 1 if given face is quad, -// 2 if given face is degenerate quad (two nodes are coincided) -//======================================================================= -int StdMeshers_QuadToTriaAdaptor::Preparation(const SMDS_MeshElement* face, - Handle(TColgp_HArray1OfPnt)& PN, - Handle(TColgp_HArray1OfVec)& VN, - std::vector& FNodes, - gp_Pnt& PC, gp_Vec& VNorm) +int StdMeshers_QuadToTriaAdaptor::Preparation(const SMDS_MeshElement* face, + Handle(TColgp_HArray1OfPnt)& PN, + Handle(TColgp_HArray1OfVec)& VN, + vector& FNodes, + gp_Pnt& PC, + gp_Vec& VNorm, + const SMDS_MeshElement** volumes) { - int i = 0; - double xc=0., yc=0., zc=0.; - SMDS_ElemIteratorPtr nodeIt = face->nodesIterator(); - if( !face->IsQuadratic() ) { + if( face->NbNodes() != ( face->IsQuadratic() ? 8 : 4 )) if( face->NbNodes() != 4 ) - return 0; - while ( nodeIt->more() ) { - i++; - const SMDS_MeshNode* node = static_cast( nodeIt->next() ); - FNodes[i-1] = node; - PN->SetValue( i, gp_Pnt(node->X(), node->Y(), node->Z()) ); - xc += node->X(); - yc += node->Y(); - zc += node->Z(); - } - } - else { - if( face->NbNodes() != 8) - return 0; - while ( nodeIt->more() ) { - i++; - const SMDS_MeshNode* node = static_cast( nodeIt->next() ); - FNodes[i-1] = node; - PN->SetValue( i, gp_Pnt(node->X(), node->Y(), node->Z()) ); - xc += node->X(); - yc += node->Y(); - zc += node->Z(); - if(i==4) break; - } + return NOT_QUAD; + + int i = 0; + gp_XYZ xyzC(0., 0., 0.); + for ( i = 0; i < 4; ++i ) + { + gp_XYZ p = SMESH_MeshEditor::TNodeXYZ( FNodes[i] = face->GetNode(i) ); + PN->SetValue( i+1, p ); + xyzC += p; } + PC = xyzC/4; + //cout<<" PC("<Value(i); - std::list< const SMDS_MeshNode* >::iterator itdg = myDegNodes.begin(); + list< const SMDS_MeshNode* >::iterator itdg = myDegNodes.begin(); const SMDS_MeshNode* DegNode = 0; for(; itdg!=myDegNodes.end(); itdg++) { const SMDS_MeshNode* N = (*itdg); @@ -377,24 +345,15 @@ int StdMeshers_QuadToTriaAdaptor::Preparation(const SMDS_MeshElement* face, FNodes[i-1] = FNodes[i]; } nbp = 3; - //PC = gp_Pnt( PN->Value(1).X() + PN.Value } - PC = gp_Pnt(xc/4., yc/4., zc/4.); - //cout<<" PC("<SetValue(5,PN->Value(1)); PN->SetValue(nbp+1,PN->Value(1)); - //FNodes[4] = FNodes[0]; FNodes[nbp] = FNodes[0]; // find normal direction - //gp_Vec V1(PC,PN->Value(4)); gp_Vec V1(PC,PN->Value(nbp)); gp_Vec V2(PC,PN->Value(1)); VNorm = V1.Crossed(V2); - //VN->SetValue(4,VNorm); VN->SetValue(nbp,VNorm); - //for(i=1; i<4; i++) { for(i=1; iValue(i)); V2 = gp_Vec(PC,PN->Value(i+1)); @@ -402,9 +361,37 @@ int StdMeshers_QuadToTriaAdaptor::Preparation(const SMDS_MeshElement* face, VN->SetValue(i,Vtmp); VNorm += Vtmp; } + + // find volumes sharing the face + if ( volumes ) + { + volumes[0] = volumes[1] = 0; + SMDS_ElemIteratorPtr vIt = FNodes[0]->GetInverseElementIterator( SMDSAbs_Volume ); + while ( vIt->more() ) + { + const SMDS_MeshElement* vol = vIt->next(); + bool volSharesAllNodes = true; + for ( int i = 1; i < face->NbNodes() && volSharesAllNodes; ++i ) + volSharesAllNodes = ( vol->GetNodeIndex( FNodes[i] ) >= 0 ); + if ( volSharesAllNodes ) + volumes[ volumes[0] ? 1 : 0 ] = vol; + // we could additionally check that vol has all FNodes in its one face using SMDS_VolumeTool + } + // define volume position relating to the face normal + if ( volumes[0] ) + { + // get volume gc + SMDS_ElemIteratorPtr nodeIt = volumes[0]->nodesIterator(); + gp_XYZ volGC(0,0,0); + volGC = accumulate( TXyzIterator(nodeIt), TXyzIterator(), volGC ) / volumes[0]->NbNodes(); + + if ( VNorm * gp_Vec( PC, volGC ) < 0 ) + swap( volumes[0], volumes[1] ); + } + } + //cout<<" VNorm("< FNodes(5); + vector FNodes(5); gp_Pnt PC; gp_Vec VNorm; int stat = Preparation(face, PN, VN, FNodes, PC, VNorm); @@ -446,13 +433,12 @@ bool StdMeshers_QuadToTriaAdaptor::Compute(SMESH_Mesh& aMesh, const TopoDS_Shape if(stat==2) { // degenerate face // add triangles to result map - std::list aList; SMDS_FaceOfNodes* NewFace; if(!isRev) NewFace = new SMDS_FaceOfNodes( FNodes[0], FNodes[1], FNodes[2] ); else NewFace = new SMDS_FaceOfNodes( FNodes[0], FNodes[2], FNodes[1] ); - aList.push_back(NewFace); + TTriaList aList( 1, NewFace ); myResMap.insert(make_pair(face,aList)); continue; } @@ -504,18 +490,18 @@ bool StdMeshers_QuadToTriaAdaptor::Compute(SMESH_Mesh& aMesh, const TopoDS_Shape } // create node for PCbest SMDS_MeshNode* NewNode = helper.AddNode( PCbest.X(), PCbest.Y(), PCbest.Z() ); + // add triangles to result map - std::list aList; - for(i=0; i<4; i++) { - SMDS_FaceOfNodes* NewFace = new SMDS_FaceOfNodes( NewNode, FNodes[i], FNodes[i+1] ); - aList.push_back(NewFace); - } - myResMap.insert(make_pair(face,aList)); + TTriaList& triaList = myResMap.insert( make_pair( face, TTriaList() ))->second; + for(i=0; i<4; i++) + triaList.push_back( new SMDS_FaceOfNodes( NewNode, FNodes[i], FNodes[i+1] )); + // create pyramid + if ( isRev ) swap( FNodes[1], FNodes[3]); SMDS_MeshVolume* aPyram = helper.AddVolume( FNodes[0], FNodes[1], FNodes[2], FNodes[3], NewNode ); - myMapFPyram.insert(make_pair(face,aPyram)); - } // end loop on elements on a face + myPyram2Trias.insert(make_pair(aPyram, & triaList)); + } // end loop on elements on a face submesh } } // end for(TopExp_Explorer exp(aShape,TopAbs_FACE);exp.More();exp.Next()) { @@ -531,7 +517,7 @@ bool StdMeshers_QuadToTriaAdaptor::Compute(SMESH_Mesh& aMesh, const TopoDS_Shape bool StdMeshers_QuadToTriaAdaptor::Compute(SMESH_Mesh& aMesh) { myResMap.clear(); - myMapFPyram.clear(); + myPyram2Trias.clear(); SMESH_MesherHelper helper(aMesh); helper.IsQuadraticSubMesh(aMesh.GetShapeToMesh()); helper.SetElementsOnShape( true ); @@ -548,26 +534,29 @@ bool StdMeshers_QuadToTriaAdaptor::Compute(SMESH_Mesh& aMesh) const SMDS_MeshElement* face = *itFace; if ( !face ) continue; //cout<GetID() = "<GetID()< FNodes(5); + vector FNodes(5); gp_Pnt PC; gp_Vec VNorm; - - int stat = Preparation(face, PN, VN, FNodes, PC, VNorm); - if(stat==0) + const SMDS_MeshElement* volumes[2]; + int what = Preparation(face, PN, VN, FNodes, PC, VNorm, volumes); + if ( what == NOT_QUAD ) continue; + if ( volumes[0] && volumes[1] ) + continue; // face is shared by two volumes - no space for a pyramid - if(stat==2) { + if ( what == DEGEN_QUAD ) + { // degenerate face // add triangles to result map - std::list aList; + TTriaList aList; SMDS_FaceOfNodes* NewFace; // check orientation - double tmp = PN->Value(1).Distance(PN->Value(2)) + - PN->Value(2).Distance(PN->Value(3)); + double tmp = PN->Value(1).Distance(PN->Value(2)) + PN->Value(2).Distance(PN->Value(3)); + // far points in VNorm direction gp_Pnt Ptmp1 = PC.XYZ() + VNorm.XYZ() * tmp * 1.e6; gp_Pnt Ptmp2 = PC.XYZ() - VNorm.XYZ() * tmp * 1.e6; // check intersection for Ptmp1 and Ptmp2 @@ -581,24 +570,10 @@ bool StdMeshers_QuadToTriaAdaptor::Compute(SMESH_Mesh& aMesh) const SMDS_MeshElement* F = *itF; if(F==face) continue; Handle(TColgp_HSequenceOfPnt) aContour = new TColgp_HSequenceOfPnt; - SMDS_ElemIteratorPtr nodeIt = F->nodesIterator(); - if( !F->IsQuadratic() ) { - while ( nodeIt->more() ) { - const SMDS_MeshNode* node = static_cast( nodeIt->next() ); - aContour->Append(gp_Pnt(node->X(), node->Y(), node->Z())); - } - } - else { - int nn = 0; - while ( nodeIt->more() ) { - nn++; - const SMDS_MeshNode* node = static_cast( nodeIt->next() ); - aContour->Append(gp_Pnt(node->X(), node->Y(), node->Z())); - if(nn==face->NbNodes()/2) break; - } - } + for ( int i = 0; i < 4; ++i ) + aContour->Append( SMESH_MeshEditor::TNodeXYZ( F->GetNode(i) )); gp_Pnt PPP; - if( HasIntersection(Ptmp1, PC, PPP, aContour) ) { + if( !volumes[0] && HasIntersection(Ptmp1, PC, PPP, aContour) ) { IsOK1 = true; double tmp = PC.Distance(PPP); if(tmpValue(i), PN->Value(i+1), PC, VN->Value(i)); - xc += Pbest.X(); - yc += Pbest.Y(); - zc += Pbest.Z(); + PCbest += Pbest.XYZ(); } - gp_Pnt PCbest(xc/4., yc/4., zc/4.); - double height = PCbest.Distance(PC); + PCbest /= 4; + + double height = PC.Distance(PCbest); // pyramid height to precise if(height<1.e-6) { // create new PCbest using a bit shift along VNorm PCbest = PC.XYZ() + VNorm.XYZ() * 0.001; - height = PCbest.Distance(PC); + height = PC.Distance(PCbest); } //cout<<" PCbest("<Value(1).Distance(PN->Value(3)) + - PN->Value(2).Distance(PN->Value(4)); - gp_Dir tmpDir(V1); - gp_Pnt Ptmp1 = PC.XYZ() + tmpDir.XYZ() * tmp * 1.e6; - gp_Pnt Ptmp2 = PC.XYZ() - tmpDir.XYZ() * tmp * 1.e6; - // check intersection for Ptmp1 and Ptmp2 - bool IsRev = false; - bool IsOK1 = false; - bool IsOK2 = false; - double dist1 = RealLast(); - double dist2 = RealLast(); - gp_Pnt Pres1,Pres2; - for (TIDSortedElemSet::iterator itF = sortedFaces.begin(); itF != fEnd; ++itF ) { + // Restrict pyramid height by intersection with other faces + gp_Vec tmpDir(PC,PCbest); tmpDir.Normalize(); + double tmp = PN->Value(1).Distance(PN->Value(3)) + PN->Value(2).Distance(PN->Value(4)); + // far points: in (PC, PCbest) direction and vice-versa + gp_Pnt farPnt[2] = { PC.XYZ() + tmpDir.XYZ() * tmp * 1.e6, + PC.XYZ() - tmpDir.XYZ() * tmp * 1.e6 }; + // check intersection for farPnt1 and farPnt2 + bool intersected[2] = { false, false }; + double dist [2] = { RealLast(), RealLast() }; + gp_Pnt intPnt[2]; + for (TIDSortedElemSet::iterator itF = sortedFaces.begin(); itF != fEnd; ++itF ) + { const SMDS_MeshElement* F = *itF; if(F==face) continue; Handle(TColgp_HSequenceOfPnt) aContour = new TColgp_HSequenceOfPnt; - SMDS_ElemIteratorPtr nodeIt = F->nodesIterator(); - if( !F->IsQuadratic() ) { - while ( nodeIt->more() ) { - const SMDS_MeshNode* node = static_cast( nodeIt->next() ); - aContour->Append(gp_Pnt(node->X(), node->Y(), node->Z())); - } - } - else { - int nn = 0; - while ( nodeIt->more() ) { - nn++; - const SMDS_MeshNode* node = static_cast( nodeIt->next() ); - aContour->Append(gp_Pnt(node->X(), node->Y(), node->Z())); - if(nn==face->NbNodes()/2) break; - } - } - gp_Pnt PPP; - if( HasIntersection(Ptmp1, PC, PPP, aContour) ) { - IsOK1 = true; - double tmp = PC.Distance(PPP); - if(tmpNbNodes() / ( F->IsQuadratic() ? 2 : 1 ); + for ( i = 0; i < nbN; ++i ) + aContour->Append( SMESH_MeshEditor::TNodeXYZ( F->GetNode(i) )); + gp_Pnt intP; + for ( int isRev = 0; isRev < 2; ++isRev ) + { + if( !volumes[isRev] && HasIntersection(farPnt[isRev], PC, intP, aContour) ) { + intersected[isRev] = true; + double d = PC.Distance( intP ); + if( d < dist[isRev] ) + { + intPnt[isRev] = intP; + dist [isRev] = d; + } } } } - if( IsOK1 && !IsOK2 ) { - // using existed direction - double tmp = PC.Distance(Pres1)/3.; - if( height > tmp ) { - height = tmp; - PCbest = PC.XYZ() + tmpDir.XYZ() * height; - } - } - else if( !IsOK1 && IsOK2 ) { - // using opposite direction - IsRev = true; - double tmp = PC.Distance(Pres2)/3.; - if( height > tmp ) height = tmp; - PCbest = PC.XYZ() - tmpDir.XYZ() * height; - } - else { // IsOK1 && IsOK2 - double tmp1 = PC.Distance(Pres1)/3.; - double tmp2 = PC.Distance(Pres2)/3.; - if(tmp1 tmp1 ) { - height = tmp1; - PCbest = PC.XYZ() + tmpDir.XYZ() * height; - } - } - else { - // using opposite direction - IsRev = true; - if( height > tmp2 ) height = tmp2; - PCbest = PC.XYZ() - tmpDir.XYZ() * height; - } - } + // Create one or two pyramids - // create node for PCbest - SMDS_MeshNode* NewNode = helper.AddNode( PCbest.X(), PCbest.Y(), PCbest.Z() ); - // add triangles to result map - std::list aList; - for(i=0; i<4; i++) { - SMDS_FaceOfNodes* NewFace; - if(IsRev) - NewFace = new SMDS_FaceOfNodes( NewNode, FNodes[i], FNodes[i+1] ); + for ( int isRev = 0; isRev < 2; ++isRev ) + { + if( !intersected[isRev] ) continue; + double pyramidH = Min( height, PC.Distance(intPnt[isRev])/3.); + PCbest = PC.XYZ() + tmpDir.XYZ() * (isRev ? -pyramidH : pyramidH); + + // create node for PCbest + SMDS_MeshNode* NewNode = helper.AddNode( PCbest.X(), PCbest.Y(), PCbest.Z() ); + + // add triangles to result map + TTriaList& aList = myResMap.insert( make_pair( face, TTriaList()))->second; + for(i=0; i<4; i++) { + SMDS_FaceOfNodes* NewFace; + if(isRev) + NewFace = new SMDS_FaceOfNodes( NewNode, FNodes[i], FNodes[i+1] ); + else + NewFace = new SMDS_FaceOfNodes( NewNode, FNodes[i+1], FNodes[i] ); + aList.push_back(NewFace); + } + // create a pyramid + SMDS_MeshVolume* aPyram; + if(isRev) + aPyram = helper.AddVolume( FNodes[0], FNodes[1], FNodes[2], FNodes[3], NewNode ); else - NewFace = new SMDS_FaceOfNodes( NewNode, FNodes[i+1], FNodes[i] ); - aList.push_back(NewFace); + aPyram = helper.AddVolume( FNodes[0], FNodes[3], FNodes[2], FNodes[1], NewNode ); + myPyram2Trias.insert(make_pair(aPyram, & aList)); } - myResMap.insert(make_pair(face,aList)); - // create pyramid - SMDS_MeshVolume* aPyram; - if(IsRev) - aPyram = helper.AddVolume( FNodes[0], FNodes[1], FNodes[2], FNodes[3], NewNode ); - else - aPyram = helper.AddVolume( FNodes[0], FNodes[3], FNodes[2], FNodes[1], NewNode ); - myMapFPyram.insert(make_pair(face,aPyram)); - } // end loop on elements on a face + } // end loop on all faces return Compute2ndPart(aMesh); } - //======================================================================= //function : Compute2ndPart -//purpose : +//purpose : Update created pyramids and faces to avoid their intersection //======================================================================= bool StdMeshers_QuadToTriaAdaptor::Compute2ndPart(SMESH_Mesh& aMesh) @@ -781,254 +713,180 @@ bool StdMeshers_QuadToTriaAdaptor::Compute2ndPart(SMESH_Mesh& aMesh) SMESHDS_Mesh * meshDS = aMesh.GetMeshDS(); // check intersections between created pyramids - int NbPyram = myMapFPyram.size(); - //cout<<"NbPyram = "< Pyrams(NbPyram); - vector< const SMDS_MeshElement* > Faces(NbPyram); - TF2PyramMap::iterator itp = myMapFPyram.begin(); - int i = 0; - for(; itp!=myMapFPyram.end(); itp++, i++) { - Faces[i] = (*itp).first; - Pyrams[i] = (*itp).second; - } - StdMeshers_Array1OfSequenceOfInteger MergesInfo(0,NbPyram-1); - for(i=0; inodesIterator(); - std::vector Ps1( Prm1->NbNodes() ); - vector< const SMDS_MeshNode* > Ns1( Prm1->NbNodes() ); - int k = 0; - for ( ; k < Ns1.size(); ++k ) { - const SMDS_MeshNode* node = static_cast( nIt->next() ); - Ns1[k] = node; - Ps1[k] = gp_Pnt(node->X(), node->Y(), node->Z()); - } + int k = 0; + + // for each pyramid store list of merged pyramids with their faces + typedef map< const SMDS_MeshElement*, list< TPyram2Trias::iterator > > TPyram2Merged; + TPyram2Merged MergesInfo; + + // iterate on all pyramids + TPyram2Trias::iterator itPi = myPyram2Trias.begin(), itPEnd = myPyram2Trias.end(); + for ( ; itPi != itPEnd; ++itPi ) + { + const SMDS_MeshElement* PrmI = itPi->first; + TPyram2Merged::iterator pMergesI = MergesInfo.find( PrmI ); + + TXyzIterator xyzIt( PrmI->nodesIterator() ); + vector PsI( xyzIt, TXyzIterator() ); + + // compare PrmI with all the rest pyramids bool NeedMove = false; - for(int j=i+1; jChangeElementNodes(Prm2, &Ns2[0], Ns2.size()); - // update pyramids for J - for(k=2; k<=nbJ; k++) { - const SMDS_MeshElement* tmpPrm = Pyrams[aMergesJ.Value(k)]; - SMDS_ElemIteratorPtr tmpIt = tmpPrm->nodesIterator(); - vector< const SMDS_MeshNode* > Ns( tmpPrm->NbNodes() ); - for ( int m = 0; m < Ns.size(); ++m ) - Ns[m] = static_cast( tmpIt->next() ); - Ns[4] = CommonNode; - meshDS->ChangeElementNodes(tmpPrm, &Ns[0], Ns.size()); - } - // update MergesInfo - for(k=1; k<=nbI; k++) { - int num = aMergesI.Value(k); - TColStd_SequenceOfInteger& aSeq = MergesInfo.ChangeValue(num); - for(int m=1; m<=nbJ; m++) - aSeq.Append(aMergesJ.Value(m)); + if ( nbc == 4 ) + continue; // pyrams have a common base face + + if(nbc>0) + { + // Merge the two pyramids and others already merged with them + + // initialize merge info of pyramids + if ( pMergesI == MergesInfo.end() ) // first merge of PrmI + { + pMergesI = MergesInfo.insert( make_pair( PrmI, list())).first; + pMergesI->second.push_back( itPi ); } - for(k=1; k<=nbJ; k++) { - int num = aMergesJ.Value(k); - TColStd_SequenceOfInteger& aSeq = MergesInfo.ChangeValue(num); - for(int m=1; m<=nbI; m++) - aSeq.Append(aMergesI.Value(m)); + if ( pMergesJ == MergesInfo.end() ) // first merge of PrmJ + { + pMergesJ = MergesInfo.insert( make_pair( PrmJ, list())).first; + pMergesJ->second.push_back( itPj ); } + int nbI = pMergesI->second.size(), nbJ = pMergesJ->second.size(); - // update triangles for aMergesJ - for(k=1; k<=nbJ; k++) { - list< list< const SMDS_MeshNode* > > aFNodes; - list< const SMDS_MeshElement* > aFFaces; - int num = aMergesJ.Value(k); - map< const SMDS_MeshElement*, - list >::iterator itrm = myResMap.find(Faces[num]); - list& trias = itrm->second; - list::iterator itt = trias.begin(); - for(; itt!=trias.end(); itt++) { - SMDS_ElemIteratorPtr nodeIt = (*itt)->nodesIterator(); - const SMDS_MeshNode* NF[3]; - int nn = 0; - while ( nodeIt->more() ) - NF[nn++] = static_cast( nodeIt->next() ); - NF[0] = CommonNode; - SMDS_FaceOfNodes* Ftria = const_cast< SMDS_FaceOfNodes*>( (*itt) ); - Ftria->ChangeNodes(NF, 3); + // an apex node to make common to all merged pyramids + SMDS_MeshNode* CommonNode = const_cast(PrmI->GetNode(4)); + CommonNode->setXYZ( ( nbI*PsI[4].X() + nbJ*PsJ[4].X() ) / (nbI+nbJ), + ( nbI*PsI[4].Y() + nbJ*PsJ[4].Y() ) / (nbI+nbJ), + ( nbI*PsI[4].Z() + nbJ*PsJ[4].Z() ) / (nbI+nbJ) ); + NeedMove = true; + const SMDS_MeshNode* Nrem = PrmJ->GetNode(4); // node to remove + + list< TPyram2Trias::iterator >& aMergesI = pMergesI->second; + list< TPyram2Trias::iterator >& aMergesJ = pMergesJ->second; + + // find and remove coincided faces of merged pyramids + list< TPyram2Trias::iterator >::iterator itPttI, itPttJ; + TTriaList::iterator trI, trJ; + for ( itPttI = aMergesI.begin(); itPttI != aMergesI.end(); ++itPttI ) + { + TTriaList* triaListI = (*itPttI)->second; + for ( trI = triaListI->begin(); trI != triaListI->end(); ) + { + const SMDS_FaceOfNodes* FI = *trI; + + for ( itPttJ = aMergesJ.begin(); itPttJ != aMergesJ.end() && FI; ++itPttJ ) + { + TTriaList* triaListJ = (*itPttJ)->second; + for ( trJ = triaListJ->begin(); trJ != triaListJ->end(); ) + { + const SMDS_FaceOfNodes* FJ = *trJ; + + if( EqualTriangles(FI,FJ) ) + { + delete FI; + delete FJ; + FI = FJ = 0; + trI = triaListI->erase( trI ); + trJ = triaListJ->erase( trJ ); + break; // only one triangle of a pyramid can coincide with another pyramid + } + ++trJ; + } + } + if ( FI ) ++trI; // increament if triangle not deleted } } - // check and remove coincided faces - //TColStd_SequenceOfInteger IdRemovedTrias; - int i1 = 1; - for(; i1<=nbI; i1++) { - int numI = aMergesI.Value(i1); - map< const SMDS_MeshElement*, - list >::iterator itrmI = myResMap.find(Faces[numI]); - list& triasI = (*itrmI).second; - list::iterator ittI = triasI.begin(); - int nbfI = triasI.size(); - vector FsI(nbfI); - k = 0; - for(; ittI!=triasI.end(); ittI++) { - FsI[k] = (*ittI); - k++; + // set the common apex node to pyramids and triangles merged with J + for ( itPttJ = aMergesJ.begin(); itPttJ != aMergesJ.end(); ++itPttJ ) + { + const SMDS_MeshElement* Prm = (*itPttJ)->first; + TTriaList* triaList = (*itPttJ)->second; + + vector< const SMDS_MeshNode* > nodes( Prm->begin_nodes(), Prm->end_nodes() ); + nodes[4] = CommonNode; + meshDS->ChangeElementNodes( Prm, &nodes[0], nodes.size()); + + for ( TTriaList::iterator trIt = triaList->begin(); trIt != triaList->end(); ++trIt ) + { + SMDS_FaceOfNodes* Ftria = const_cast< SMDS_FaceOfNodes*>( *trIt ); + const SMDS_MeshNode* NF[3] = { CommonNode, Ftria->GetNode(1), Ftria->GetNode(2)}; + Ftria->ChangeNodes(NF, 3); } - int i2 = 0; - for(; i2 >::iterator itrmJ = myResMap.find(Faces[numJ]); - list& triasJ = (*itrmJ).second; - list::iterator ittJ = triasJ.begin(); - int nbfJ = triasJ.size(); - vector FsJ(nbfJ); - k = 0; - for(; ittJ!=triasJ.end(); ittJ++) { - FsJ[k] = (*ittJ); - k++; - } - int j2 = 0; - for(; j2GetID() ); - //IdRemovedTrias.Append( FJ->GetID() ); - FsI[i2] = 0; - FsJ[j2] = 0; - list new_triasI; - for(k=0; k new_triasJ; - for(k=0; kfirst; + list< TPyram2Trias::iterator >& merges = MergesInfo[ PrmI ]; + merges.insert( merges.end(), aMergesJ.begin(), aMergesJ.end() ); + } + for ( k = 0, itPttJ = aMergesJ.begin(); k < nbJ; ++itPttJ, ++k ) + { + const SMDS_MeshElement* PrmJ = (*itPttJ)->first; + list< TPyram2Trias::iterator >& merges = MergesInfo[ PrmJ ]; + merges.insert( merges.end(), aMergesI.begin(), aMergesI.end() ); + } + // removing node meshDS->RemoveNode(Nrem); } else { // nbc==0 - //cout<<"decrease height of pyramids"<(Ns1[4]); VN1.Scale(coef1); - aNode1->setXYZ( PC1.X()+VN1.X(), PC1.Y()+VN1.Y(), PC1.Z()+VN1.Z() ); - SMDS_MeshNode* aNode2 = const_cast(Ns2[4]); VN2.Scale(coef2); + SMDS_MeshNode* aNode1 = const_cast(PrmI->GetNode(4)); + aNode1->setXYZ( PC1.X()+VN1.X(), PC1.Y()+VN1.Y(), PC1.Z()+VN1.Z() ); + SMDS_MeshNode* aNode2 = const_cast(PrmJ->GetNode(4)); aNode2->setXYZ( PC2.X()+VN2.X(), PC2.Y()+VN2.Y(), PC2.Z()+VN2.Z() ); NeedMove = true; } } // end if(hasInt) - else { - //cout<<" no intersec for i="< -#include -#include +#include "SMDS_FaceOfNodes.hxx" + +class SMESH_Mesh; +class SMDS_MeshElement; +class SMDS_MeshNode; +class Handle(TColgp_HArray1OfPnt); +class Handle(TColgp_HArray1OfVec); +class TopoDS_Shape; +class gp_Pnt; +class gp_Vec; + #include #include @@ -40,8 +45,6 @@ class STDMESHERS_EXPORT StdMeshers_QuadToTriaAdaptor { public: - StdMeshers_QuadToTriaAdaptor(); - ~StdMeshers_QuadToTriaAdaptor(); bool Compute(SMESH_Mesh& aMesh, const TopoDS_Shape& aShape); @@ -58,7 +61,8 @@ protected: Handle(TColgp_HArray1OfPnt)& PN, Handle(TColgp_HArray1OfVec)& VN, std::vector& FNodes, - gp_Pnt& PC, gp_Vec& VNorm); + gp_Pnt& PC, gp_Vec& VNorm, + const SMDS_MeshElement** volumes=0); bool CheckIntersection(const gp_Pnt& P, const gp_Pnt& PC, gp_Pnt& Pint, SMESH_Mesh& aMesh, @@ -67,10 +71,13 @@ protected: bool Compute2ndPart(SMESH_Mesh& aMesh); - typedef std::map< const SMDS_MeshElement*, const SMDS_MeshElement*, TIDCompare > TF2PyramMap; + typedef std::list TTriaList; + typedef std::multimap TQuad2Trias; + typedef std::map TPyram2Trias; + + TQuad2Trias myResMap; + TPyram2Trias myPyram2Trias; - std::map< const SMDS_MeshElement*, std::list > myResMap; - TF2PyramMap myMapFPyram; std::list< const SMDS_MeshNode* > myDegNodes; }; diff --git a/src/StdMeshers/StdMeshers_QuadrangleParams.cxx b/src/StdMeshers/StdMeshers_QuadrangleParams.cxx index ad3fee841..07cd7f649 100644 --- a/src/StdMeshers/StdMeshers_QuadrangleParams.cxx +++ b/src/StdMeshers/StdMeshers_QuadrangleParams.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_QuadrangleParams.cxx // Author : Sergey KUUL, OCC @@ -48,7 +46,7 @@ using namespace std; //============================================================================= StdMeshers_QuadrangleParams::StdMeshers_QuadrangleParams(int hypId, int studyId, - SMESH_Gen * gen) + SMESH_Gen * gen) :SMESH_Hypothesis(hypId, studyId, gen) { _name = "QuadrangleParams"; @@ -142,7 +140,7 @@ istream & operator >>(istream & load, StdMeshers_QuadrangleParams & hyp) //================================================================================ bool StdMeshers_QuadrangleParams::SetParametersByMesh(const SMESH_Mesh* theMesh, - const TopoDS_Shape& theShape) + const TopoDS_Shape& theShape) { if ( !theMesh || theShape.IsNull() ) return false; @@ -158,7 +156,7 @@ bool StdMeshers_QuadrangleParams::SetParametersByMesh(const SMESH_Mesh* theMesh, //================================================================================ bool StdMeshers_QuadrangleParams::SetParametersByDefaults(const TDefaults& dflts, - const SMESH_Mesh* /*mesh*/) + const SMESH_Mesh* /*mesh*/) { return true; } diff --git a/src/StdMeshers/StdMeshers_QuadrangleParams.hxx b/src/StdMeshers/StdMeshers_QuadrangleParams.hxx index ab1c56fab..da37f0755 100644 --- a/src/StdMeshers/StdMeshers_QuadrangleParams.hxx +++ b/src/StdMeshers/StdMeshers_QuadrangleParams.hxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_QuadrangleParams.hxx // Author : Sergey KUUL, OCC @@ -52,9 +50,9 @@ public: virtual std::ostream & SaveTo(std::ostream & save); virtual std::istream & LoadFrom(std::istream & load); friend std::ostream& operator << (std::ostream & save, - StdMeshers_QuadrangleParams & hyp); + StdMeshers_QuadrangleParams & hyp); friend std::istream& operator >> (std::istream & load, - StdMeshers_QuadrangleParams & hyp); + StdMeshers_QuadrangleParams & hyp); /*! * \brief Initialize start and end length by the mesh built on the geometry @@ -63,14 +61,14 @@ public: * \retval bool - true if parameter values have been successfully defined */ virtual bool SetParametersByMesh(const SMESH_Mesh* theMesh, - const TopoDS_Shape& theShape); + const TopoDS_Shape& theShape); /*! * \brief Initialize my parameter values by default parameters. * \retval bool - true if parameter values have been successfully defined */ virtual bool SetParametersByDefaults(const TDefaults& dflts, - const SMESH_Mesh* theMesh=0); + const SMESH_Mesh* theMesh=0); protected: int _triaVertexID; diff --git a/src/StdMeshers/StdMeshers_QuadranglePreference.cxx b/src/StdMeshers/StdMeshers_QuadranglePreference.cxx index cf3986e38..81a2601a4 100644 --- a/src/StdMeshers/StdMeshers_QuadranglePreference.cxx +++ b/src/StdMeshers/StdMeshers_QuadranglePreference.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,10 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers_QuadranglePreference : implementaion of SMESH idl descriptions // File : StdMeshers_QuadranglePreference.cxx // Module : SMESH - +// #include "StdMeshers_QuadranglePreference.hxx" #include "utilities.h" diff --git a/src/StdMeshers/StdMeshers_QuadranglePreference.hxx b/src/StdMeshers/StdMeshers_QuadranglePreference.hxx index ec641d15a..24dcb7e5e 100644 --- a/src/StdMeshers/StdMeshers_QuadranglePreference.hxx +++ b/src/StdMeshers/StdMeshers_QuadranglePreference.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,10 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of SMESH idl descriptions // File : StdMeshers_QuadranglePreference.hxx // Module : SMESH - +// #ifndef _StdMeshers_QuadranglePreference_HXX_ #define _StdMeshers_QuadranglePreference_HXX_ diff --git a/src/StdMeshers/StdMeshers_Quadrangle_2D.cxx b/src/StdMeshers/StdMeshers_Quadrangle_2D.cxx index 501915676..5e2031c23 100644 --- a/src/StdMeshers/StdMeshers_Quadrangle_2D.cxx +++ b/src/StdMeshers/StdMeshers_Quadrangle_2D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Quadrangle_2D.cxx // Moved here from SMESH_Quadrangle_2D.cxx @@ -43,7 +44,6 @@ #include "SMDS_EdgePosition.hxx" #include "SMDS_FacePosition.hxx" -#include #include #include #include @@ -51,7 +51,9 @@ #include #include #include +#include #include +#include #include #include "utilities.h" @@ -773,14 +775,21 @@ FaceQuadStruct* StdMeshers_Quadrangle_2D::CheckNbEdges(SMESH_Mesh & aMes int nbSides = 0; list< TopoDS_Edge >::iterator edgeIt = edges.begin(); - if ( nbEdgesInWire.front() == 3 ) { // exactly 3 edges - if(myTriaVertexID>0) { - SMESHDS_Mesh* meshDS = aMesh.GetMeshDS(); + if ( nbEdgesInWire.front() == 3 ) // exactly 3 edges + { + SMESH_Comment comment; + SMESHDS_Mesh* meshDS = aMesh.GetMeshDS(); + if ( myTriaVertexID == -1) + { + comment << "No Base vertex parameter provided for a trilateral geometrical face"; + } + else + { TopoDS_Vertex V = TopoDS::Vertex(meshDS->IndexToShape(myTriaVertexID)); - if(!V.IsNull()) { + if ( !V.IsNull() ) { TopoDS_Edge E1,E2,E3; for(; edgeIt != edges.end(); ++edgeIt) { - TopoDS_Edge E = TopoDS::Edge(*edgeIt); + TopoDS_Edge E = *edgeIt; TopoDS_Vertex VF, VL; TopExp::Vertices(E, VF, VL, true); if( VF.IsSame(V) ) @@ -790,22 +799,29 @@ FaceQuadStruct* StdMeshers_Quadrangle_2D::CheckNbEdges(SMESH_Mesh & aMes else E2 = E; } - quad->side.reserve(4); - quad->side.push_back( new StdMeshers_FaceSide(F, E1, &aMesh, true, ignoreMediumNodes)); - quad->side.push_back( new StdMeshers_FaceSide(F, E2, &aMesh, true, ignoreMediumNodes)); - quad->side.push_back( new StdMeshers_FaceSide(F, E3, &aMesh, false, ignoreMediumNodes)); - std::vector UVPSleft = quad->side[0]->GetUVPtStruct(true,0); - std::vector UVPStop = quad->side[1]->GetUVPtStruct(false,1); - std::vector UVPSright = quad->side[2]->GetUVPtStruct(true,1); - const SMDS_MeshNode* aNode = UVPSleft[0].node; - gp_Pnt2d aPnt2d( UVPSleft[0].u, UVPSleft[0].v ); - StdMeshers_FaceSide* VertFS = - new StdMeshers_FaceSide(aNode, aPnt2d, quad->side[1]); - quad->side.push_back(VertFS); - return quad; + if ( !E1.IsNull() && !E2.IsNull() && !E3.IsNull() ) + { + quad->side.push_back( new StdMeshers_FaceSide(F, E1, &aMesh, true, ignoreMediumNodes)); + quad->side.push_back( new StdMeshers_FaceSide(F, E2, &aMesh, true, ignoreMediumNodes)); + quad->side.push_back( new StdMeshers_FaceSide(F, E3, &aMesh, false,ignoreMediumNodes)); + const vector& UVPSleft = quad->side[0]->GetUVPtStruct(true,0); + /* vector& UVPStop = */quad->side[1]->GetUVPtStruct(false,1); + /* vector& UVPSright = */quad->side[2]->GetUVPtStruct(true,1); + const SMDS_MeshNode* aNode = UVPSleft[0].node; + gp_Pnt2d aPnt2d( UVPSleft[0].u, UVPSleft[0].v ); + quad->side.push_back( new StdMeshers_FaceSide(aNode, aPnt2d, quad->side[1])); + return quad; + } } + comment << "Invalid Base vertex parameter: " << myTriaVertexID << " is not among ["; + TopTools_MapOfShape vMap; + for ( TopExp_Explorer v( aShape, TopAbs_VERTEX ); v.More(); v.Next()) + if ( vMap.Add( v.Current() )) + comment << meshDS->ShapeToIndex( v.Current() ) << ( vMap.Extent()==3 ? "]" : ", "); } - return 0; + error( comment ); + delete quad; + return quad = 0; } else if ( nbEdgesInWire.front() == 4 ) { // exactly 4 edges for ( ; edgeIt != edges.end(); ++edgeIt, nbSides++ ) diff --git a/src/StdMeshers/StdMeshers_Quadrangle_2D.hxx b/src/StdMeshers/StdMeshers_Quadrangle_2D.hxx index 25083af32..74c64f6f0 100644 --- a/src/StdMeshers/StdMeshers_Quadrangle_2D.hxx +++ b/src/StdMeshers/StdMeshers_Quadrangle_2D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Quadrangle_2D.hxx // Moved here from SMESH_Quadrangle_2D.hxx @@ -63,13 +64,13 @@ public: SMESH_Hypothesis::Hypothesis_Status& aStatus); virtual bool Compute(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape); + const TopoDS_Shape& aShape); virtual bool Evaluate(SMESH_Mesh & aMesh, const TopoDS_Shape & aShape, MapShapeNbElems& aResMap); FaceQuadStruct* CheckAnd2Dcompute(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape, + const TopoDS_Shape& aShape, const bool CreateQuadratic); protected: @@ -78,14 +79,14 @@ protected: const TopoDS_Shape& aShape); bool CheckNbEdgesForEvaluate(SMESH_Mesh& aMesh, - const TopoDS_Shape & aShape, - MapShapeNbElems& aResMap, - std::vector& aNbNodes, + const TopoDS_Shape & aShape, + MapShapeNbElems& aResMap, + std::vector& aNbNodes, bool& IsQuadratic); bool SetNormalizedGrid(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape, - FaceQuadStruct*& quad); + const TopoDS_Shape& aShape, + FaceQuadStruct*& quad); void SplitQuad(SMESHDS_Mesh *theMeshDS, const int theFaceID, @@ -102,22 +103,22 @@ protected: FaceQuadStruct* quad); bool EvaluateQuadPref(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape, - std::vector& aNbNodes, - MapShapeNbElems& aResMap, + const TopoDS_Shape& aShape, + std::vector& aNbNodes, + MapShapeNbElems& aResMap, bool IsQuadratic); UVPtStruct* LoadEdgePoints2(SMESH_Mesh& aMesh, - const TopoDS_Face& F, const TopoDS_Edge& E, + const TopoDS_Face& F, const TopoDS_Edge& E, bool IsReverse); UVPtStruct* LoadEdgePoints(SMESH_Mesh& aMesh, - const TopoDS_Face& F, const TopoDS_Edge& E, - double first, double last); + const TopoDS_Face& F, const TopoDS_Edge& E, + double first, double last); UVPtStruct* MakeEdgePoints(SMESH_Mesh& aMesh, - const TopoDS_Face& F, const TopoDS_Edge& E, - double first, double last, int nb_segm); + const TopoDS_Face& F, const TopoDS_Edge& E, + double first, double last, int nb_segm); // true if QuadranglePreference hypothesis is assigned that forces // construction of quadrangles if the number of nodes on opposite edges diff --git a/src/StdMeshers/StdMeshers_QuadraticMesh.cxx b/src/StdMeshers/StdMeshers_QuadraticMesh.cxx index 4764356f2..de6fe8652 100644 --- a/src/StdMeshers/StdMeshers_QuadraticMesh.cxx +++ b/src/StdMeshers/StdMeshers_QuadraticMesh.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,10 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers_QuadraticMesh : implementaion of SMESH idl descriptions // File : StdMeshers_QuadraticMesh.cxx // Module : SMESH - +// #include "StdMeshers_QuadraticMesh.hxx" #include "utilities.h" diff --git a/src/StdMeshers/StdMeshers_QuadraticMesh.hxx b/src/StdMeshers/StdMeshers_QuadraticMesh.hxx index 9972469c0..ec43466b4 100644 --- a/src/StdMeshers/StdMeshers_QuadraticMesh.hxx +++ b/src/StdMeshers/StdMeshers_QuadraticMesh.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,10 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of SMESH idl descriptions // File : StdMeshers_QuadraticMesh.hxx // Module : SMESH - +// #ifndef _StdMeshers_QuadraticMesh_HXX_ #define _StdMeshers_QuadraticMesh_HXX_ diff --git a/src/StdMeshers/StdMeshers_RadialPrism_3D.cxx b/src/StdMeshers/StdMeshers_RadialPrism_3D.cxx index fb6cc94e1..c08c6b31e 100644 --- a/src/StdMeshers/StdMeshers_RadialPrism_3D.cxx +++ b/src/StdMeshers/StdMeshers_RadialPrism_3D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_RadialPrism_3D.cxx // Module : SMESH @@ -71,7 +72,7 @@ StdMeshers_RadialPrism_3D::StdMeshers_RadialPrism_3D(int hypId, int studyId, SME :SMESH_3D_Algo(hypId, studyId, gen) { _name = "RadialPrism_3D"; - _shapeType = (1 << TopAbs_SOLID); // 1 bit per shape type + _shapeType = (1 << TopAbs_SOLID); // 1 bit per shape type _compatibleHypothesis.push_back("LayerDistribution"); _compatibleHypothesis.push_back("NumberOfLayers"); @@ -396,8 +397,8 @@ bool StdMeshers_RadialPrism_3D::computeLayerPositions(const gp_Pnt& pIn, //======================================================================= bool StdMeshers_RadialPrism_3D::Evaluate(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape, - MapShapeNbElems& aResMap) + const TopoDS_Shape& aShape, + MapShapeNbElems& aResMap) { // get 2 shells TopoDS_Solid solid = TopoDS::Solid( aShape ); diff --git a/src/StdMeshers/StdMeshers_RadialPrism_3D.hxx b/src/StdMeshers/StdMeshers_RadialPrism_3D.hxx index 21d8f8362..1d0b59375 100644 --- a/src/StdMeshers/StdMeshers_RadialPrism_3D.hxx +++ b/src/StdMeshers/StdMeshers_RadialPrism_3D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_RadialPrism_3D.hxx // Module : SMESH diff --git a/src/StdMeshers/StdMeshers_RadialQuadrangle_1D2D.cxx b/src/StdMeshers/StdMeshers_RadialQuadrangle_1D2D.cxx index 8d21195db..d03470fb3 100644 --- a/src/StdMeshers/StdMeshers_RadialQuadrangle_1D2D.cxx +++ b/src/StdMeshers/StdMeshers_RadialQuadrangle_1D2D.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_RadialQuadrangle_1D2D.cxx // Module : SMESH @@ -27,15 +25,15 @@ // #include "StdMeshers_RadialQuadrangle_1D2D.hxx" -//#include "StdMeshers_ProjectionUtils.hxx" #include "StdMeshers_NumberOfLayers.hxx" #include "StdMeshers_LayerDistribution.hxx" -//#include "StdMeshers_Prism_3D.hxx" #include "StdMeshers_Regular_1D.hxx" +#include "StdMeshers_NumberOfSegments.hxx" #include "SMDS_MeshNode.hxx" #include "SMESHDS_SubMesh.hxx" #include "SMESH_Gen.hxx" +#include "SMESH_HypoFilter.hxx" #include "SMESH_Mesh.hxx" #include "SMESH_MesherHelper.hxx" #include "SMESH_subMesh.hxx" @@ -53,6 +51,7 @@ #include #include #include +#include #include @@ -61,8 +60,6 @@ using namespace std; #define RETURN_BAD_RESULT(msg) { MESSAGE(")-: Error: " << msg); return false; } #define gpXYZ(n) gp_XYZ(n->X(),n->Y(),n->Z()) -//typedef StdMeshers_ProjectionUtils TAssocTool; - //======================================================================= //function : StdMeshers_RadialQuadrangle_1D2D @@ -82,6 +79,7 @@ StdMeshers_RadialQuadrangle_1D2D::StdMeshers_RadialQuadrangle_1D2D(int hypId, myNbLayerHypo = 0; myDistributionHypo = 0; _requireDescretBoundary = false; + _supportSubmeshes = true; } @@ -113,8 +111,8 @@ bool StdMeshers_RadialQuadrangle_1D2D::CheckHypothesis const list &hyps = GetUsedHypothesis(aMesh, aShape); if ( hyps.size() == 0 ) { - aStatus = SMESH_Hypothesis::HYP_MISSING; - return false; // can't work with no hypothesis + aStatus = SMESH_Hypothesis::HYP_OK; + return true; // can work with no hypothesis } if ( hyps.size() > 1 ) { @@ -146,27 +144,42 @@ namespace /*! * \brief Listener used to mark edges meshed by StdMeshers_RadialQuadrangle_1D2D */ - class TLinEdgeMarker : public SMESH_subMeshEventListener + class TEdgeMarker : public SMESH_subMeshEventListener { - TLinEdgeMarker(): SMESH_subMeshEventListener(/*isDeletable=*/false) {} + TEdgeMarker(): SMESH_subMeshEventListener(/*isDeletable=*/false) {} public: + //!< Return static listener static SMESH_subMeshEventListener* getListener() { - static TLinEdgeMarker theEdgeMarker; + static TEdgeMarker theEdgeMarker; return &theEdgeMarker; } + //! Clear face sumbesh if something happens on edges + void ProcessEvent(const int event, + const int eventType, + SMESH_subMesh* edgeSubMesh, + EventListenerData* data, + const SMESH_Hypothesis* /*hyp*/) + { + if ( data && !data->mySubMeshes.empty() && eventType == SMESH_subMesh::ALGO_EVENT) + { + ASSERT( data->mySubMeshes.front() != edgeSubMesh ); + SMESH_subMesh* faceSubMesh = data->mySubMeshes.front(); + faceSubMesh->ComputeStateEngine( SMESH_subMesh::CLEAN ); + } + } }; - + // ------------------------------------------------------------------------------ /*! * \brief Mark an edge as computed by StdMeshers_RadialQuadrangle_1D2D */ - void markLinEdgeAsComputedByMe(const TopoDS_Edge& edge, SMESH_subMesh* faceSubMesh) + void markEdgeAsComputedByMe(const TopoDS_Edge& edge, SMESH_subMesh* faceSubMesh) { if ( SMESH_subMesh* edgeSM = faceSubMesh->GetFather()->GetSubMeshContaining( edge )) { - if ( !edgeSM->GetEventListenerData( TLinEdgeMarker::getListener() )) - faceSubMesh->SetEventListener( TLinEdgeMarker::getListener(), + if ( !edgeSM->GetEventListenerData( TEdgeMarker::getListener() )) + faceSubMesh->SetEventListener( TEdgeMarker::getListener(), SMESH_subMeshEventListenerData::MakeData(faceSubMesh), edgeSM); } @@ -176,38 +189,30 @@ namespace * \brief Return true if a radial edge was meshed with StdMeshers_RadialQuadrangle_1D2D with * the same radial distribution */ - bool isEdgeCompitaballyMeshed(const TopoDS_Edge& edge, SMESH_subMesh* faceSubMesh) - { - if ( SMESH_subMesh* edgeSM = faceSubMesh->GetFather()->GetSubMeshContaining( edge )) - { - if ( SMESH_subMeshEventListenerData* otherFaceData = - edgeSM->GetEventListenerData( TLinEdgeMarker::getListener() )) - { - // compare hypothesis aplied to two disk faces sharing radial edges - SMESH_Mesh& mesh = *faceSubMesh->GetFather(); - SMESH_Algo* radialQuadAlgo = mesh.GetGen()->GetAlgo(mesh, faceSubMesh->GetSubShape() ); - SMESH_subMesh* otherFaceSubMesh = otherFaceData->mySubMeshes.front(); - const list & hyps1 = - radialQuadAlgo->GetUsedHypothesis( mesh, faceSubMesh->GetSubShape()); - const list & hyps2 = - radialQuadAlgo->GetUsedHypothesis( mesh, otherFaceSubMesh->GetSubShape()); - if( hyps1.empty() && hyps2.empty() ) - return true; // defaul hyps - if ( hyps1.size() != hyps2.size() || - strcmp( hyps1.front()->GetName(), hyps2.front()->GetName() )) - return false; - ostringstream hypDump1, hypDump2; - list ::const_iterator hyp1 = hyps1.begin(); - for ( ; hyp1 != hyps1.end(); ++hyp1 ) - const_cast(*hyp1)->SaveTo( hypDump1 ); - list ::const_iterator hyp2 = hyps2.begin(); - for ( ; hyp2 != hyps2.end(); ++hyp2 ) - const_cast(*hyp2)->SaveTo( hypDump2 ); - return hypDump1.str() == hypDump2.str(); - } - } - return false; - } +// bool isEdgeCompatiballyMeshed(const TopoDS_Edge& edge, SMESH_subMesh* faceSubMesh) +// { +// if ( SMESH_subMesh* edgeSM = faceSubMesh->GetFather()->GetSubMeshContaining( edge )) +// { +// if ( SMESH_subMeshEventListenerData* otherFaceData = +// edgeSM->GetEventListenerData( TEdgeMarker::getListener() )) +// { +// // compare hypothesis aplied to two disk faces sharing radial edges +// SMESH_Mesh& mesh = *faceSubMesh->GetFather(); +// SMESH_Algo* radialQuadAlgo = mesh.GetGen()->GetAlgo(mesh, faceSubMesh->GetSubShape() ); +// SMESH_subMesh* otherFaceSubMesh = otherFaceData->mySubMeshes.front(); +// list hyps1 = +// radialQuadAlgo->GetUsedHypothesis( mesh, faceSubMesh->GetSubShape()); +// list hyps2 = +// radialQuadAlgo->GetUsedHypothesis( mesh, otherFaceSubMesh->GetSubShape()); +// if( hyps1.empty() && hyps2.empty() ) +// return true; // defaul hyps +// if ( hyps1.size() != hyps2.size() ) +// return false; +// return *hyps1.front() == *hyps2.front(); +// } +// } +// return false; +// } //================================================================================ /*! @@ -273,6 +278,123 @@ namespace } return nbe; } + +//================================================================================ +//================================================================================ +/*! + * \brief Class computing layers distribution using data of + * StdMeshers_LayerDistribution hypothesis + */ +//================================================================================ +//================================================================================ + +class TNodeDistributor: public StdMeshers_Regular_1D +{ + list myUsedHyps; +public: + // ----------------------------------------------------------------------------- + static TNodeDistributor* GetDistributor(SMESH_Mesh& aMesh) + { + const int myID = -1000; + map < int, SMESH_1D_Algo * > & algoMap = aMesh.GetGen()->_map1D_Algo; + map < int, SMESH_1D_Algo * >::iterator id_algo = algoMap.find( myID ); + if ( id_algo == algoMap.end() ) + return new TNodeDistributor( myID, 0, aMesh.GetGen() ); + return static_cast< TNodeDistributor* >( id_algo->second ); + } + // ----------------------------------------------------------------------------- + //! Computes distribution of nodes on a straight line ending at pIn and pOut + bool Compute( vector< double > & positions, + gp_Pnt pIn, + gp_Pnt pOut, + SMESH_Mesh& aMesh, + const SMESH_Hypothesis* hyp1d) + { + if ( !hyp1d ) return error( "Invalid LayerDistribution hypothesis"); + + double len = pIn.Distance( pOut ); + if ( len <= DBL_MIN ) return error("Too close points of inner and outer shells"); + + myUsedHyps.clear(); + myUsedHyps.push_back( hyp1d ); + + TopoDS_Edge edge = BRepBuilderAPI_MakeEdge( pIn, pOut ); + SMESH_Hypothesis::Hypothesis_Status aStatus; + if ( !StdMeshers_Regular_1D::CheckHypothesis( aMesh, edge, aStatus )) + return error( "StdMeshers_Regular_1D::CheckHypothesis() failed " + "with LayerDistribution hypothesis"); + + BRepAdaptor_Curve C3D(edge); + double f = C3D.FirstParameter(), l = C3D.LastParameter(); + list< double > params; + if ( !StdMeshers_Regular_1D::computeInternalParameters( aMesh, C3D, len, f, l, params, false )) + return error("StdMeshers_Regular_1D failed to compute layers distribution"); + + positions.clear(); + positions.reserve( params.size() ); + for (list::iterator itU = params.begin(); itU != params.end(); itU++) + positions.push_back( *itU / len ); + return true; + } + // ----------------------------------------------------------------------------- + //! Make mesh on an adge using assigned 1d hyp or defaut nb of segments + bool ComputeCircularEdge(SMESH_Mesh& aMesh, + const TopoDS_Edge& anEdge) + { + _gen->Compute( aMesh, anEdge); + SMESH_subMesh *sm = aMesh.GetSubMesh(anEdge); + if ( sm->GetComputeState() != SMESH_subMesh::COMPUTE_OK) + { + // find any 1d hyp assigned (there can be a hyp w/o algo) + myUsedHyps = SMESH_Algo::GetUsedHypothesis(aMesh, anEdge, /*ignoreAux=*/true); + Hypothesis_Status aStatus; + if ( !StdMeshers_Regular_1D::CheckHypothesis( aMesh, anEdge, aStatus )) + { + // no valid 1d hyp assigned, use default nb of segments + _hypType = NB_SEGMENTS; + _ivalue[ DISTR_TYPE_IND ] = StdMeshers_NumberOfSegments::DT_Regular; + _ivalue[ NB_SEGMENTS_IND ] = _gen->GetDefaultNbSegments(); + } + return StdMeshers_Regular_1D::Compute( aMesh, anEdge ); + } + return true; + } + // ----------------------------------------------------------------------------- + //! Make mesh on an adge using assigned 1d hyp or defaut nb of segments + bool EvaluateCircularEdge(SMESH_Mesh& aMesh, + const TopoDS_Edge& anEdge, + MapShapeNbElems& aResMap) + { + _gen->Evaluate( aMesh, anEdge, aResMap ); + if ( aResMap.count( aMesh.GetSubMesh( anEdge ))) + return true; + + // find any 1d hyp assigned + myUsedHyps = SMESH_Algo::GetUsedHypothesis(aMesh, anEdge, /*ignoreAux=*/true); + Hypothesis_Status aStatus; + if ( !StdMeshers_Regular_1D::CheckHypothesis( aMesh, anEdge, aStatus )) + { + // no valid 1d hyp assigned, use default nb of segments + _hypType = NB_SEGMENTS; + _ivalue[ DISTR_TYPE_IND ] = StdMeshers_NumberOfSegments::DT_Regular; + _ivalue[ NB_SEGMENTS_IND ] = _gen->GetDefaultNbSegments(); + } + return StdMeshers_Regular_1D::Evaluate( aMesh, anEdge, aResMap ); + } +protected: + // ----------------------------------------------------------------------------- + TNodeDistributor( int hypId, int studyId, SMESH_Gen* gen) + : StdMeshers_Regular_1D( hypId, studyId, gen) + { + } + // ----------------------------------------------------------------------------- + virtual const list & + GetUsedHypothesis(SMESH_Mesh &, const TopoDS_Shape &, const bool) + { + return myUsedHyps; + } + // ----------------------------------------------------------------------------- +}; } //======================================================================= @@ -280,7 +402,7 @@ namespace * \brief Allow algo to do something after persistent restoration * \param subMesh - restored submesh * - * call markLinEdgeAsComputedByMe() + * call markEdgeAsComputedByMe() */ //======================================================================= @@ -290,8 +412,9 @@ void StdMeshers_RadialQuadrangle_1D2D::SubmeshRestored(SMESH_subMesh* faceSubMes { TopoDS_Edge CircEdge, LinEdge1, LinEdge2; analyseFace( faceSubMesh->GetSubShape(), CircEdge, LinEdge1, LinEdge2 ); - if ( !LinEdge1.IsNull() ) markLinEdgeAsComputedByMe( LinEdge1, faceSubMesh ); - if ( !LinEdge2.IsNull() ) markLinEdgeAsComputedByMe( LinEdge2, faceSubMesh ); + if ( !CircEdge.IsNull() ) markEdgeAsComputedByMe( CircEdge, faceSubMesh ); + if ( !LinEdge1.IsNull() ) markEdgeAsComputedByMe( LinEdge1, faceSubMesh ); + if ( !LinEdge2.IsNull() ) markEdgeAsComputedByMe( LinEdge2, faceSubMesh ); } } @@ -311,14 +434,15 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, // to delete helper at exit from Compute() auto_ptr helperDeleter( myHelper ); - myLayerPositions.clear(); + TNodeDistributor* algo1d = TNodeDistributor::GetDistributor(aMesh); TopoDS_Edge CircEdge, LinEdge1, LinEdge2; int nbe = analyseFace( aShape, CircEdge, LinEdge1, LinEdge2 ); - if( nbe>3 || nbe < 1 || CircEdge.IsNull() ) - return error(COMPERR_BAD_SHAPE); + Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast( getCurve( CircEdge )); + if( nbe>3 || nbe < 1 || aCirc.IsNull() ) + return error("The face must be a full circle or a part of circle (i.e. the number of edges is less or equal to 3 and one of them is a circle curve)"); - gp_Pnt P0,P1; + gp_Pnt P0, P1; // points for rotation TColgp_SequenceOfPnt Points; // angles for rotation @@ -335,15 +459,14 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, TopoDS_Face F = TopoDS::Face(aShape); Handle(Geom_Surface) S = BRep_Tool::Surface(F); + if(nbe==1) { - Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast( getCurve( CircEdge )); - - bool ok = _gen->Compute( aMesh, CircEdge ); - if( !ok ) return false; + if (!algo1d->ComputeCircularEdge( aMesh, CircEdge )) + return error( algo1d->GetComputeError() ); map< double, const SMDS_MeshNode* > theNodes; - ok = GetSortedNodesOnEdge(aMesh.GetMeshDS(),CircEdge,true,theNodes); - if( !ok ) return false; + if ( !GetSortedNodesOnEdge(aMesh.GetMeshDS(),CircEdge,true,theNodes)) + return error("Circular edge is incorrectly meshed"); CNodes.clear(); map< double, const SMDS_MeshNode* >::iterator itn = theNodes.begin(); @@ -363,8 +486,8 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, P1 = gp_Pnt( NF->X(), NF->Y(), NF->Z() ); P0 = aCirc->Location(); - myLayerPositions.clear(); - computeLayerPositions(P0,P1); + if ( !computeLayerPositions(P0,P1)) + return false; exp.Init( CircEdge, TopAbs_VERTEX ); TopoDS_Vertex V1 = TopoDS::Vertex( exp.Current() ); @@ -413,22 +536,16 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, // other curve not line return error(COMPERR_BAD_SHAPE); } - bool linEdgeComputed = false; - if( SMESH_subMesh* sm1 = aMesh.GetSubMesh(LinEdge1) ) { - if( !sm1->IsEmpty() ) - if( isEdgeCompitaballyMeshed( LinEdge1, aMesh.GetSubMesh(F) )) - linEdgeComputed = true; - else - return error("Invalid set of hypotheses"); - } - bool ok = _gen->Compute( aMesh, CircEdge ); - if( !ok ) return false; + if ( !algo1d->ComputeCircularEdge( aMesh, CircEdge )) + return error( algo1d->GetComputeError() ); map< double, const SMDS_MeshNode* > theNodes; - GetSortedNodesOnEdge(aMesh.GetMeshDS(),CircEdge,true,theNodes); + if ( !GetSortedNodesOnEdge(aMesh.GetMeshDS(),CircEdge,true,theNodes) ) + return error("Circular edge is incorrectly meshed"); - CNodes.clear(); map< double, const SMDS_MeshNode* >::iterator itn = theNodes.begin(); + CNodes.clear(); + CNodes.push_back( itn->second ); double fang = (*itn).first; itn++; for(; itn != theNodes.end(); itn++ ) { @@ -440,13 +557,13 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, } const SMDS_MeshNode* NF = theNodes.begin()->second; const SMDS_MeshNode* NL = theNodes.rbegin()->second; - CNodes.push_back( NF ); P1 = gp_Pnt( NF->X(), NF->Y(), NF->Z() ); gp_Pnt P2( NL->X(), NL->Y(), NL->Z() ); P0 = aCirc->Location(); - myLayerPositions.clear(); - computeLayerPositions(P0,P1); + bool linEdgeComputed; + if ( !computeLayerPositions(P0,P1,LinEdge1,&linEdgeComputed)) + return false; if ( linEdgeComputed ) { @@ -537,7 +654,7 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, SMDS_MeshEdge* ME = myHelper->AddEdge( tmpNodes[i-1], tmpNodes[i] ); if(ME) meshDS->SetMeshElementOnShape(ME, edgeID); } - markLinEdgeAsComputedByMe( LinEdge1, aMesh.GetSubMesh( F )); + markEdgeAsComputedByMe( LinEdge1, aMesh.GetSubMesh( F )); } } else // nbe==3 or ( nbe==2 && linEdge is INTERNAL ) @@ -549,33 +666,16 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, // segments of line double fp, lp; Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast( getCurve( CircEdge )); - Handle(Geom_Line) aLine1 = Handle(Geom_Line)::DownCast( getCurve( LinEdge1 )); - Handle(Geom_Line) aLine2 = Handle(Geom_Line)::DownCast( getCurve( LinEdge2 )); - if( aLine1.IsNull() || aLine2.IsNull() ) { - // other curve not line + Handle(Geom_Line) aLine1 = Handle(Geom_Line)::DownCast( getCurve( LinEdge1 )); + Handle(Geom_Line) aLine2 = Handle(Geom_Line)::DownCast( getCurve( LinEdge2 )); + if( aCirc.IsNull() || aLine1.IsNull() || aLine2.IsNull() ) return error(COMPERR_BAD_SHAPE); - } - - bool linEdge1Computed = false; - if ( SMESH_subMesh* sm1 = aMesh.GetSubMesh(LinEdge1)) - if( !sm1->IsEmpty() ) - if( isEdgeCompitaballyMeshed( LinEdge1, aMesh.GetSubMesh(F) )) - linEdge1Computed = true; - else - return error("Invalid set of hypotheses"); - - bool linEdge2Computed = false; - if ( SMESH_subMesh* sm2 = aMesh.GetSubMesh(LinEdge2)) - if( !sm2->IsEmpty() ) - if( isEdgeCompitaballyMeshed( LinEdge2, aMesh.GetSubMesh(F) )) - linEdge2Computed = true; - else - return error("Invalid set of hypotheses"); - bool ok = _gen->Compute( aMesh, CircEdge ); - if( !ok ) return false; + if ( !algo1d->ComputeCircularEdge( aMesh, CircEdge )) + return error( algo1d->GetComputeError() ); map< double, const SMDS_MeshNode* > theNodes; - GetSortedNodesOnEdge(aMesh.GetMeshDS(),CircEdge,true,theNodes); + if ( !GetSortedNodesOnEdge(aMesh.GetMeshDS(),CircEdge,true,theNodes)) + return error("Circular edge is incorrectly meshed"); const SMDS_MeshNode* NF = theNodes.begin()->second; const SMDS_MeshNode* NL = theNodes.rbegin()->second; @@ -595,12 +695,19 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, gp_Pnt P2( NL->X(), NL->Y(), NL->Z() ); P0 = aCirc->Location(); - myLayerPositions.clear(); - computeLayerPositions(P0,P1); + bool linEdge1Computed, linEdge2Computed; + if ( !computeLayerPositions(P0,P1,LinEdge1,&linEdge1Computed)) + return false; Nodes1.resize( myLayerPositions.size()+1 ); Nodes2.resize( myLayerPositions.size()+1 ); + // check that both linear edges have same hypotheses + if ( !computeLayerPositions(P0,P1,LinEdge2, &linEdge2Computed)) + return false; + if ( Nodes1.size() != myLayerPositions.size()+1 ) + return error("Different hypotheses apply to radial edges"); + exp.Init( LinEdge1, TopAbs_VERTEX ); TopoDS_Vertex V1 = TopoDS::Vertex( exp.Current() ); exp.Next(); @@ -701,7 +808,7 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, if (nbe==2 && LinEdge1.Orientation() == TopAbs_INTERNAL ) Nodes2 = Nodes1; } - markLinEdgeAsComputedByMe( LinEdge1, aMesh.GetSubMesh( F )); + markEdgeAsComputedByMe( LinEdge1, aMesh.GetSubMesh( F )); // LinEdge2 if ( linEdge2Computed ) @@ -765,8 +872,9 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, if(ME) meshDS->SetMeshElementOnShape(ME, edgeID); } } - markLinEdgeAsComputedByMe( LinEdge2, aMesh.GetSubMesh( F )); + markEdgeAsComputedByMe( LinEdge2, aMesh.GetSubMesh( F )); } + markEdgeAsComputedByMe( CircEdge, aMesh.GetSubMesh( F )); // orientation bool IsForward = ( CircEdge.Orientation()==TopAbs_FORWARD ); @@ -850,106 +958,103 @@ bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh, return true; } - -//================================================================================ //================================================================================ /*! - * \brief Class computing layers distribution using data of - * StdMeshers_LayerDistribution hypothesis + * \brief Compute positions of nodes on the radial edge + * \retval bool - is a success */ //================================================================================ -//================================================================================ -class TNodeDistributor: public StdMeshers_Regular_1D +bool StdMeshers_RadialQuadrangle_1D2D::computeLayerPositions(const gp_Pnt& p1, + const gp_Pnt& p2, + const TopoDS_Edge& linEdge, + bool* linEdgeComputed) { - list myUsedHyps; -public: - // ----------------------------------------------------------------------------- - static TNodeDistributor* GetDistributor(SMESH_Mesh& aMesh) - { - const int myID = -1000; - map < int, SMESH_1D_Algo * > & algoMap = aMesh.GetGen()->_map1D_Algo; - map < int, SMESH_1D_Algo * >::iterator id_algo = algoMap.find( myID ); - if ( id_algo == algoMap.end() ) - return new TNodeDistributor( myID, 0, aMesh.GetGen() ); - return static_cast< TNodeDistributor* >( id_algo->second ); - } - // ----------------------------------------------------------------------------- - bool Compute( vector< double > & positions, - gp_Pnt pIn, - gp_Pnt pOut, - SMESH_Mesh& aMesh, - const StdMeshers_LayerDistribution* hyp) - { - double len = pIn.Distance( pOut ); - if ( len <= DBL_MIN ) return error("Too close points of inner and outer shells"); + // First, try to compute positions of layers - if ( !hyp || !hyp->GetLayerDistribution() ) - return error( "Invalid LayerDistribution hypothesis"); - myUsedHyps.clear(); - myUsedHyps.push_back( hyp->GetLayerDistribution() ); + myLayerPositions.clear(); - TopoDS_Edge edge = BRepBuilderAPI_MakeEdge( pIn, pOut ); - SMESH_Hypothesis::Hypothesis_Status aStatus; - if ( !StdMeshers_Regular_1D::CheckHypothesis( aMesh, edge, aStatus )) - return error( "StdMeshers_Regular_1D::CheckHypothesis() failed " - "with LayerDistribution hypothesis"); + SMESH_Mesh * mesh = myHelper->GetMesh(); - BRepAdaptor_Curve C3D(edge); - double f = C3D.FirstParameter(), l = C3D.LastParameter(); - list< double > params; - if ( !StdMeshers_Regular_1D::computeInternalParameters( aMesh, C3D, len, f, l, params, false )) - return error("StdMeshers_Regular_1D failed to compute layers distribution"); + const SMESH_Hypothesis* hyp1D = myDistributionHypo ? myDistributionHypo->GetLayerDistribution() : 0; + int nbLayers = myNbLayerHypo ? myNbLayerHypo->GetNumberOfLayers() : 0; - positions.clear(); - positions.reserve( params.size() ); - for (list::iterator itU = params.begin(); itU != params.end(); itU++) - positions.push_back( *itU / len ); - return true; + if ( !hyp1D && !nbLayers ) + { + // No own algo hypotheses assigned, so first try to find any 1D hypothesis. + // We need some edge + TopoDS_Shape edge = linEdge; + if ( edge.IsNull() && !myHelper->GetSubShape().IsNull()) + for ( TopExp_Explorer e(myHelper->GetSubShape(), TopAbs_EDGE); e.More(); e.Next()) + edge = e.Current(); + if ( !edge.IsNull() ) + { + // find a hyp usable by TNodeDistributor + SMESH_HypoFilter hypKind; + TNodeDistributor::GetDistributor(*mesh)->InitCompatibleHypoFilter(hypKind,/*ignoreAux=*/1); + hyp1D = mesh->GetHypothesis( edge, hypKind, /*fromAncestors=*/true); + } } -protected: - // ----------------------------------------------------------------------------- - TNodeDistributor( int hypId, int studyId, SMESH_Gen* gen) - : StdMeshers_Regular_1D( hypId, studyId, gen) + if ( hyp1D ) // try to compute with hyp1D { + if ( !TNodeDistributor::GetDistributor(*mesh)->Compute( myLayerPositions,p1,p2,*mesh,hyp1D )) + if ( myDistributionHypo ) { // bad hyp assigned + return error( TNodeDistributor::GetDistributor(*mesh)->GetComputeError() ); + } + else { + // bad hyp found, its Ok, lets try with default nb of segnents + } } - // ----------------------------------------------------------------------------- - virtual const list & - GetUsedHypothesis(SMESH_Mesh &, const TopoDS_Shape &, const bool) + + if ( myLayerPositions.empty() ) // try to use nb of layers { - return myUsedHyps; + if ( !nbLayers ) + nbLayers = _gen->GetDefaultNbSegments(); + + if ( nbLayers ) + { + myLayerPositions.resize( nbLayers - 1 ); + for ( int z = 1; z < nbLayers; ++z ) + myLayerPositions[ z - 1 ] = double( z )/ double( nbLayers ); + } } - // ----------------------------------------------------------------------------- -}; -//================================================================================ -/*! - * \brief Compute positions of nodes between the internal and the external surfaces - * \retval bool - is a success - */ -//================================================================================ + // Second, check presence of a mesh built by other algo on linEdge + // and mesh conformity to my hypothesis -bool StdMeshers_RadialQuadrangle_1D2D::computeLayerPositions(const gp_Pnt& pIn, - const gp_Pnt& pOut) -{ - if ( myNbLayerHypo ) + bool meshComputed = (!linEdge.IsNull() && !mesh->GetSubMesh(linEdge)->IsEmpty() ); + if ( linEdgeComputed ) *linEdgeComputed = meshComputed; + + if ( meshComputed ) { - int nbSegments = myNbLayerHypo->GetNumberOfLayers(); - myLayerPositions.resize( nbSegments - 1 ); - for ( int z = 1; z < nbSegments; ++z ) - myLayerPositions[ z - 1 ] = double( z )/ double( nbSegments ); - return true; - } - if ( myDistributionHypo ) { - SMESH_Mesh * mesh = myHelper->GetMesh(); - if ( !TNodeDistributor::GetDistributor(*mesh)->Compute( myLayerPositions, pIn, pOut, - *mesh, myDistributionHypo )) + vector< double > nodeParams; + GetNodeParamOnEdge( mesh->GetMeshDS(), linEdge, nodeParams ); + + if ( myLayerPositions.empty() ) { - error( TNodeDistributor::GetDistributor(*mesh)->GetComputeError() ); - return false; + myLayerPositions.resize( nodeParams.size() - 2 ); + } + else if ( myDistributionHypo || myNbLayerHypo ) + { + // linEdge is computed by other algo. Check if there is a meshed face + // using nodes on linEdge + bool nodesAreUsed = false; + TopTools_ListIteratorOfListOfShape ancestIt = mesh->GetAncestors( linEdge ); + for ( ; ancestIt.More() && !nodesAreUsed; ancestIt.Next() ) + if ( ancestIt.Value().ShapeType() == TopAbs_FACE ) + nodesAreUsed = (!mesh->GetSubMesh( ancestIt.Value() )->IsEmpty()); + if ( !nodesAreUsed ) { + // rebuild them + mesh->GetSubMesh( linEdge )->ComputeStateEngine( SMESH_subMesh::CLEAN ); + if ( linEdgeComputed ) *linEdgeComputed = false; + } + else if ( myLayerPositions.size() != nodeParams.size()-2 ) { + return error("Radial edge is meshed by other algorithm"); + } } } - RETURN_BAD_RESULT("Bad hypothesis"); + + return !myLayerPositions.empty(); } @@ -965,113 +1070,82 @@ bool StdMeshers_RadialQuadrangle_1D2D::Evaluate(SMESH_Mesh& aMesh, if( aShape.ShapeType() != TopAbs_FACE ) { return false; } - SMESH_subMesh * smf = aMesh.GetSubMesh(aShape); - MapShapeNbElemsItr anIt = aResMap.find(smf); - if( anIt != aResMap.end() ) { + SMESH_subMesh * sm = aMesh.GetSubMesh(aShape); + if( aResMap.count(sm) ) return false; - } - myLayerPositions.clear(); - gp_Pnt P0(0,0,0); - gp_Pnt P1(100,0,0); - computeLayerPositions(P0,P1); - - TopoDS_Edge E1,E2,E3; - Handle(Geom_Curve) C1,C2,C3; - double f1,l1,f2,l2,f3,l3; - int nbe = 0; - TopExp_Explorer exp; - for ( exp.Init( aShape, TopAbs_EDGE ); exp.More(); exp.Next() ) { - nbe++; - TopoDS_Edge E = TopoDS::Edge( exp.Current() ); - if(nbe==1) { - E1 = E; - C1 = BRep_Tool::Curve(E,f1,l1); - } - else if(nbe==2) { - E2 = E; - C2 = BRep_Tool::Curve(E,f2,l2); - } - else if(nbe==3) { - E3 = E; - C3 = BRep_Tool::Curve(E,f3,l3); - } - } + vector& aResVec = + aResMap.insert( make_pair(sm, vector(SMDSEntity_Last,0))).first->second; + + myHelper = new SMESH_MesherHelper( aMesh ); + myHelper->SetSubShape( aShape ); + auto_ptr helperDeleter( myHelper ); + + TNodeDistributor* algo1d = TNodeDistributor::GetDistributor(aMesh); TopoDS_Edge CircEdge, LinEdge1, LinEdge2; + int nbe = analyseFace( aShape, CircEdge, LinEdge1, LinEdge2 ); + if( nbe>3 || nbe < 1 || CircEdge.IsNull() ) + return false; + + Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast( getCurve( CircEdge )); + if( aCirc.IsNull() ) + return error(COMPERR_BAD_SHAPE); + + gp_Pnt P0 = aCirc->Location(); + gp_Pnt P1 = aCirc->Value(0.); + computeLayerPositions( P0, P1, LinEdge1 ); + int nb0d=0, nb2d_tria=0, nb2d_quad=0; - bool isQuadratic = false; - if(nbe==1) { + bool isQuadratic = false, ok = true; + if(nbe==1) + { // C1 must be a circle - Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast(C1); - if( !aCirc.IsNull() ) { - bool ok = _gen->Evaluate( aMesh, CircEdge, aResMap ); - if(ok) { - SMESH_subMesh * sm = aMesh.GetSubMesh(CircEdge); - MapShapeNbElemsItr anIt = aResMap.find(sm); - vector aVec = (*anIt).second; - isQuadratic = aVec[SMDSEntity_Quad_Edge]>aVec[SMDSEntity_Edge]; - if(isQuadratic) { - // main nodes - nb0d = (aVec[SMDSEntity_Node]+1) * myLayerPositions.size(); - // radial medium nodes - nb0d += (aVec[SMDSEntity_Node]+1) * (myLayerPositions.size()+1); - // other medium nodes - nb0d += (aVec[SMDSEntity_Node]+1) * myLayerPositions.size(); - } - else { - nb0d = (aVec[SMDSEntity_Node]+1) * myLayerPositions.size(); - } - nb2d_tria = aVec[SMDSEntity_Node] + 1; - nb2d_quad = nb0d; + ok = algo1d->EvaluateCircularEdge( aMesh, CircEdge, aResMap ); + if(ok) { + const vector& aVec = aResMap[aMesh.GetSubMesh(CircEdge)]; + isQuadratic = aVec[SMDSEntity_Quad_Edge]>aVec[SMDSEntity_Edge]; + if(isQuadratic) { + // main nodes + nb0d = (aVec[SMDSEntity_Node]+1) * myLayerPositions.size(); + // radial medium nodes + nb0d += (aVec[SMDSEntity_Node]+1) * (myLayerPositions.size()+1); + // other medium nodes + nb0d += (aVec[SMDSEntity_Node]+1) * myLayerPositions.size(); } + else { + nb0d = (aVec[SMDSEntity_Node]+1) * myLayerPositions.size(); + } + nb2d_tria = aVec[SMDSEntity_Node] + 1; + nb2d_quad = nb0d; } } - else if(nbe==2) { + else if(nbe==2 && LinEdge1.Orientation() != TopAbs_INTERNAL) + { // one curve must be a half of circle and other curve must be // a segment of line - Handle(Geom_TrimmedCurve) tc = Handle(Geom_TrimmedCurve)::DownCast(C1); - while( !tc.IsNull() ) { - C1 = tc->BasisCurve(); - tc = Handle(Geom_TrimmedCurve)::DownCast(C1); - } - tc = Handle(Geom_TrimmedCurve)::DownCast(C2); - while( !tc.IsNull() ) { - C2 = tc->BasisCurve(); - tc = Handle(Geom_TrimmedCurve)::DownCast(C2); - } - Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast(C1); - Handle(Geom_Line) aLine = Handle(Geom_Line)::DownCast(C2); - CircEdge = E1; - LinEdge1 = E2; - double fp = f1; - double lp = l1; - if( aCirc.IsNull() ) { - aCirc = Handle(Geom_Circle)::DownCast(C2); - CircEdge = E2; - LinEdge1 = E1; - fp = f2; - lp = l2; - aLine = Handle(Geom_Line)::DownCast(C3); - } - bool ok = !aCirc.IsNull() && !aLine.IsNull(); + double fp, lp; + Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast( getCurve( CircEdge, &fp, &lp )); if( fabs(fabs(lp-fp)-PI) > Precision::Confusion() ) { // not half of circle - ok = false; + return error(COMPERR_BAD_SHAPE); + } + Handle(Geom_Line) aLine = Handle(Geom_Line)::DownCast( getCurve( LinEdge1 )); + if( aLine.IsNull() ) { + // other curve not line + return error(COMPERR_BAD_SHAPE); } - SMESH_subMesh* sm1 = aMesh.GetSubMesh(LinEdge1); - MapShapeNbElemsItr anIt = aResMap.find(sm1); - if( anIt!=aResMap.end() ) { - ok = false; + ok = !aResMap.count( aMesh.GetSubMesh(LinEdge1) ); + if ( !ok ) { + const vector& aVec = aResMap[ aMesh.GetSubMesh(LinEdge1) ]; + ok = ( aVec[SMDSEntity_Node] == myLayerPositions.size() ); } if(ok) { - ok = _gen->Evaluate( aMesh, CircEdge, aResMap ); + ok = algo1d->EvaluateCircularEdge( aMesh, CircEdge, aResMap ); } if(ok) { - SMESH_subMesh * sm = aMesh.GetSubMesh(CircEdge); - MapShapeNbElemsItr anIt = aResMap.find(sm); - vector aVec = (*anIt).second; - isQuadratic = aVec[SMDSEntity_Quad_Edge]>aVec[SMDSEntity_Edge]; + const vector& aVec = aResMap[ aMesh.GetSubMesh(CircEdge) ]; + isQuadratic = aVec[SMDSEntity_Quad_Edge] > aVec[SMDSEntity_Edge]; if(isQuadratic) { // main nodes nb0d = aVec[SMDSEntity_Node] * myLayerPositions.size(); @@ -1086,8 +1160,7 @@ bool StdMeshers_RadialQuadrangle_1D2D::Evaluate(SMESH_Mesh& aMesh, nb2d_tria = aVec[SMDSEntity_Node] + 1; nb2d_quad = nb2d_tria * myLayerPositions.size(); // add evaluation for edges - vector aResVec(SMDSEntity_Last); - for(int i=SMDSEntity_Node; i aResVec(SMDSEntity_Last,0); if(isQuadratic) { aResVec[SMDSEntity_Node] = 4*myLayerPositions.size() + 3; aResVec[SMDSEntity_Quad_Edge] = 2*myLayerPositions.size() + 2; @@ -1096,74 +1169,49 @@ bool StdMeshers_RadialQuadrangle_1D2D::Evaluate(SMESH_Mesh& aMesh, aResVec[SMDSEntity_Node] = 2*myLayerPositions.size() + 1; aResVec[SMDSEntity_Edge] = 2*myLayerPositions.size() + 2; } - sm = aMesh.GetSubMesh(LinEdge1); - aResMap.insert(make_pair(sm,aResVec)); + aResMap[ aMesh.GetSubMesh(LinEdge1) ] = aResVec; } } - else { // nbe==3 + else // nbe==3 or ( nbe==2 && linEdge is INTERNAL ) + { + if (nbe==2 && LinEdge1.Orientation() == TopAbs_INTERNAL ) + LinEdge2 = LinEdge1; + // one curve must be a part of circle and other curves must be // segments of line - Handle(Geom_TrimmedCurve) tc = Handle(Geom_TrimmedCurve)::DownCast(C1); - while( !tc.IsNull() ) { - C1 = tc->BasisCurve(); - tc = Handle(Geom_TrimmedCurve)::DownCast(C1); - } - tc = Handle(Geom_TrimmedCurve)::DownCast(C2); - while( !tc.IsNull() ) { - C2 = tc->BasisCurve(); - tc = Handle(Geom_TrimmedCurve)::DownCast(C2); - } - tc = Handle(Geom_TrimmedCurve)::DownCast(C3); - while( !tc.IsNull() ) { - C3 = tc->BasisCurve(); - tc = Handle(Geom_TrimmedCurve)::DownCast(C3); + Handle(Geom_Line) aLine1 = Handle(Geom_Line)::DownCast( getCurve( LinEdge1 )); + Handle(Geom_Line) aLine2 = Handle(Geom_Line)::DownCast( getCurve( LinEdge2 )); + if( aLine1.IsNull() || aLine2.IsNull() ) { + // other curve not line + return error(COMPERR_BAD_SHAPE); } - Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast(C1); - Handle(Geom_Line) aLine1 = Handle(Geom_Line)::DownCast(C2); - Handle(Geom_Line) aLine2 = Handle(Geom_Line)::DownCast(C3); - CircEdge = E1; - LinEdge1 = E2; - LinEdge2 = E3; - double fp = f1; - double lp = l1; - if( aCirc.IsNull() ) { - aCirc = Handle(Geom_Circle)::DownCast(C2); - CircEdge = E2; - LinEdge1 = E3; - LinEdge2 = E1; - fp = f2; - lp = l2; - aLine1 = Handle(Geom_Line)::DownCast(C3); - aLine2 = Handle(Geom_Line)::DownCast(C1); - if( aCirc.IsNull() ) { - aCirc = Handle(Geom_Circle)::DownCast(C3); - CircEdge = E3; - LinEdge1 = E1; - LinEdge2 = E2; - fp = f3; - lp = l3; - aLine1 = Handle(Geom_Line)::DownCast(C1); - aLine2 = Handle(Geom_Line)::DownCast(C2); + int nbLayers = myLayerPositions.size(); + computeLayerPositions( P0, P1, LinEdge2 ); + if ( nbLayers != myLayerPositions.size() ) + return error("Different hypotheses apply to radial edges"); + + bool ok = !aResMap.count( aMesh.GetSubMesh(LinEdge1)); + if ( !ok ) { + if ( myDistributionHypo || myNbLayerHypo ) + ok = true; // override other 1d hyps + else { + const vector& aVec = aResMap[ aMesh.GetSubMesh(LinEdge1) ]; + ok = ( aVec[SMDSEntity_Node] == myLayerPositions.size() ); } } - bool ok = !aCirc.IsNull() && !aLine1.IsNull() && !aLine1.IsNull(); - SMESH_subMesh* sm = aMesh.GetSubMesh(LinEdge1); - MapShapeNbElemsItr anIt = aResMap.find(sm); - if( anIt!=aResMap.end() ) { - ok = false; - } - sm = aMesh.GetSubMesh(LinEdge2); - anIt = aResMap.find(sm); - if( anIt!=aResMap.end() ) { - ok = false; + if( ok && aResMap.count( aMesh.GetSubMesh(LinEdge2) )) { + if ( myDistributionHypo || myNbLayerHypo ) + ok = true; // override other 1d hyps + else { + const vector& aVec = aResMap[ aMesh.GetSubMesh(LinEdge2) ]; + ok = ( aVec[SMDSEntity_Node] == myLayerPositions.size() ); + } } if(ok) { - ok = _gen->Evaluate( aMesh, CircEdge, aResMap ); + ok = algo1d->EvaluateCircularEdge( aMesh, CircEdge, aResMap ); } if(ok) { - SMESH_subMesh * sm = aMesh.GetSubMesh(CircEdge); - MapShapeNbElemsItr anIt = aResMap.find(sm); - vector aVec = (*anIt).second; + const vector& aVec = aResMap[ aMesh.GetSubMesh(CircEdge) ]; isQuadratic = aVec[SMDSEntity_Quad_Edge]>aVec[SMDSEntity_Edge]; if(isQuadratic) { // main nodes @@ -1179,8 +1227,7 @@ bool StdMeshers_RadialQuadrangle_1D2D::Evaluate(SMESH_Mesh& aMesh, nb2d_tria = aVec[SMDSEntity_Node] + 1; nb2d_quad = nb2d_tria * myLayerPositions.size(); // add evaluation for edges - vector aResVec(SMDSEntity_Last); - for(int i=SMDSEntity_Node; i aResVec(SMDSEntity_Last, 0); if(isQuadratic) { aResVec[SMDSEntity_Node] = 2*myLayerPositions.size() + 1; aResVec[SMDSEntity_Quad_Edge] = myLayerPositions.size() + 1; @@ -1190,17 +1237,12 @@ bool StdMeshers_RadialQuadrangle_1D2D::Evaluate(SMESH_Mesh& aMesh, aResVec[SMDSEntity_Edge] = myLayerPositions.size() + 1; } sm = aMesh.GetSubMesh(LinEdge1); - aResMap.insert(make_pair(sm,aResVec)); + aResMap[sm] = aResVec; sm = aMesh.GetSubMesh(LinEdge2); - aResMap.insert(make_pair(sm,aResVec)); + aResMap[sm] = aResVec; } } - vector aResVec(SMDSEntity_Last); - for(int i=SMDSEntity_Node; i -//#include +#include + +#include class StdMeshers_NumberOfLayers; class StdMeshers_LayerDistribution; @@ -63,8 +61,10 @@ public: protected: - bool computeLayerPositions(const gp_Pnt& pIn, - const gp_Pnt& pOut); + bool computeLayerPositions(const gp_Pnt& p1, + const gp_Pnt& p2, + const TopoDS_Edge& linEdge=TopoDS_Edge(), + bool* linEdgeComputed = 0); const StdMeshers_NumberOfLayers* myNbLayerHypo; diff --git a/src/StdMeshers/StdMeshers_Regular_1D.cxx b/src/StdMeshers/StdMeshers_Regular_1D.cxx index c3e86a98d..391bd38c3 100644 --- a/src/StdMeshers/StdMeshers_Regular_1D.cxx +++ b/src/StdMeshers/StdMeshers_Regular_1D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,12 +19,13 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Regular_1D.cxx // Moved here from SMESH_Regular_1D.cxx // Author : Paul RASCLE, EDF // Module : SMESH - +// #include "StdMeshers_Regular_1D.hxx" #include "StdMeshers_Distribution.hxx" @@ -325,6 +326,8 @@ static bool computeParamByFunc(Adaptor3d_Curve& C3d, double first, double last, return false; prevU = U; } + if ( theReverse ) + theParams.reverse(); return true; } @@ -804,38 +807,83 @@ bool StdMeshers_Regular_1D::computeInternalParameters(SMESH_Mesh & theMesh, } if(!IsExist) Params.InsertBefore(j,aPnts[i]); } - double pf, pl, par2, par1, psize; - if (theReverse) { - pf = l; - pl = f; + double par2, par1, lp; + par1 = f; + lp = l; + double sign = 1.0; + if(theReverse) { + par1 = l; + lp = f; + sign = -1.0; } - else { - pf = f; - pl = l; - } - psize = pl - pf; - par1 = pf; - //cout<<"aPnts.size() = "< tmpParams; + for(int i=2; i::iterator itP = tmpParams.begin(); + for(; itP != tmpParams.end(); itP++) { + theParams.push_back( *(itP) ); } + theParams.push_back( par2 ); + par1 = par2; } // add for last int nbseg = ( nbsegs.size() > Params.Length() ) ? nbsegs[Params.Length()] : nbsegs[0]; - double dp = (pl-par1)/nbseg; - int j = 1; - for(; j tmpParams; + for(int i=2; i::iterator itP = tmpParams.begin(); + for(; itP != tmpParams.end(); itP++) { + theParams.push_back( *(itP) ); + } + if (theReverse) { theParams.reverse(); // NPAL18025 } @@ -1048,8 +1096,7 @@ bool StdMeshers_Regular_1D::Evaluate(SMESH_Mesh & theMesh, ASSERT(!VFirst.IsNull()); ASSERT(!VLast.IsNull()); - std::vector aVec(SMDSEntity_Last); - for(int i=SMDSEntity_Node; i aVec(SMDSEntity_Last,0); if (!Curve.IsNull()) { list< double > params; diff --git a/src/StdMeshers/StdMeshers_Regular_1D.hxx b/src/StdMeshers/StdMeshers_Regular_1D.hxx index 86a573c54..c0217343b 100644 --- a/src/StdMeshers/StdMeshers_Regular_1D.hxx +++ b/src/StdMeshers/StdMeshers_Regular_1D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,12 +19,13 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_Regular_1D.hxx // Moved here from SMESH_Regular_1D.hxx // Author : Paul RASCLE, EDF // Module : SMESH - +// #ifndef _SMESH_REGULAR_1D_HXX_ #define _SMESH_REGULAR_1D_HXX_ @@ -49,7 +50,7 @@ public: SMESH_Hypothesis::Hypothesis_Status& aStatus); virtual bool Compute(SMESH_Mesh& aMesh, - const TopoDS_Shape& aShape); + const TopoDS_Shape& aShape); virtual bool Evaluate(SMESH_Mesh & aMesh, const TopoDS_Shape & aShape, MapShapeNbElems& aResMap); diff --git a/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.cxx b/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.cxx index 204909320..d2bb42baa 100644 --- a/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.cxx +++ b/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_SegmentAroundVertex_0D.cxx // Module : SMESH @@ -38,7 +39,7 @@ StdMeshers_SegmentAroundVertex_0D::StdMeshers_SegmentAroundVertex_0D { _name = "SegmentAroundVertex_0D"; // it is assigned to vertices but influence a state of EDGE submeshes - _shapeType = (1 << TopAbs_VERTEX); // 1 bit per shape type + _shapeType = (1 << TopAbs_VERTEX); // 1 bit per shape type _compatibleHypothesis.push_back("SegmentLengthAroundVertex"); } @@ -100,8 +101,8 @@ bool StdMeshers_SegmentAroundVertex_0D::Compute(SMESH_Mesh&, const TopoDS_Shape& //======================================================================= bool StdMeshers_SegmentAroundVertex_0D::Evaluate(SMESH_Mesh&, - const TopoDS_Shape&, - MapShapeNbElems&) + const TopoDS_Shape&, + MapShapeNbElems&) { // This algorithm exists in order just to enable assignation of // StdMeshers_SegmentLengthAroundVertex hypothesis diff --git a/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.hxx b/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.hxx index a2f1bd579..72371496d 100644 --- a/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.hxx +++ b/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_SegmentAroundVertex_0D.hxx // Module : SMESH diff --git a/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.cxx b/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.cxx index 599690c6a..70898baca 100644 --- a/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.cxx +++ b/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,10 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_SegmentLengthAroundVertex.cxx // Module : SMESH - +// #include "StdMeshers_SegmentLengthAroundVertex.hxx" #include "SMESH_Mesh.hxx" diff --git a/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.hxx b/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.hxx index c7c54bbf6..48e366b66 100644 --- a/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.hxx +++ b/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,11 +19,12 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_SegmentLengthAroundVertex.hxx // Author : Paul RASCLE, EDF // Module : SMESH - +// #ifndef _SMESH_SegmentLengthAroundVertex_HXX_ #define _SMESH_SegmentLengthAroundVertex_HXX_ diff --git a/src/StdMeshers/StdMeshers_StartEndLength.cxx b/src/StdMeshers/StdMeshers_StartEndLength.cxx index 46e9a7cc3..e4043dd7d 100644 --- a/src/StdMeshers/StdMeshers_StartEndLength.cxx +++ b/src/StdMeshers/StdMeshers_StartEndLength.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,10 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers_StartEndLength : implementaion of SMESH idl descriptions // File : StdMeshers_StartEndLength.cxx // Module : SMESH - +// #include "StdMeshers_StartEndLength.hxx" #include "SMESH_Algo.hxx" diff --git a/src/StdMeshers/StdMeshers_StartEndLength.hxx b/src/StdMeshers/StdMeshers_StartEndLength.hxx index 35ae4e0c4..feb477a53 100644 --- a/src/StdMeshers/StdMeshers_StartEndLength.hxx +++ b/src/StdMeshers/StdMeshers_StartEndLength.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,10 +19,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of SMESH idl descriptions // File : StdMeshers_StartEndLength.hxx // Module : SMESH - +// #ifndef _STDMESHERS_STARTENDLENGTH_HXX_ #define _STDMESHERS_STARTENDLENGTH_HXX_ diff --git a/src/StdMeshers/StdMeshers_TrianglePreference.cxx b/src/StdMeshers/StdMeshers_TrianglePreference.cxx index 331cd0d1c..dac3ca289 100644 --- a/src/StdMeshers/StdMeshers_TrianglePreference.cxx +++ b/src/StdMeshers/StdMeshers_TrianglePreference.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,10 +16,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers_TrianglePreference // File : StdMeshers_TrianglePreference.cxx // Module : SMESH - +// #include "StdMeshers_TrianglePreference.hxx" #include "utilities.h" diff --git a/src/StdMeshers/StdMeshers_TrianglePreference.hxx b/src/StdMeshers/StdMeshers_TrianglePreference.hxx index 34ec364a1..c4fb0d7c3 100644 --- a/src/StdMeshers/StdMeshers_TrianglePreference.hxx +++ b/src/StdMeshers/StdMeshers_TrianglePreference.hxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,10 +16,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH StdMeshers : implementaion of SMESH idl descriptions // File : StdMeshers_TrianglePreference.hxx // Module : SMESH - +// #ifndef _StdMeshers_TrianglePreference_HXX_ #define _StdMeshers_TrianglePreference_HXX_ diff --git a/src/StdMeshers/StdMeshers_UseExisting_1D2D.cxx b/src/StdMeshers/StdMeshers_UseExisting_1D2D.cxx index 3638498e1..7a35a1b97 100644 --- a/src/StdMeshers/StdMeshers_UseExisting_1D2D.cxx +++ b/src/StdMeshers/StdMeshers_UseExisting_1D2D.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_UseExisting_1D2D.cxx // Module : SMESH @@ -72,8 +70,8 @@ bool StdMeshers_UseExisting_1D::Compute(SMESH_Mesh&, const TopoDS_Shape&) //======================================================================= bool StdMeshers_UseExisting_1D::Evaluate(SMESH_Mesh&, - const TopoDS_Shape&, - MapShapeNbElems&) + const TopoDS_Shape&, + MapShapeNbElems&) { // This algorithm exists to allow mesh generation by mesh // edition functions in TUI mode @@ -126,8 +124,8 @@ bool StdMeshers_UseExisting_2D::Compute(SMESH_Mesh&, const TopoDS_Shape&) //======================================================================= bool StdMeshers_UseExisting_2D::Evaluate(SMESH_Mesh&, - const TopoDS_Shape&, - MapShapeNbElems&) + const TopoDS_Shape&, + MapShapeNbElems&) { // This algorithm exists to allow mesh generation by mesh edition // functions in TUI mode diff --git a/src/StdMeshers/StdMeshers_UseExisting_1D2D.hxx b/src/StdMeshers/StdMeshers_UseExisting_1D2D.hxx index 961fb4ba9..220cac842 100644 --- a/src/StdMeshers/StdMeshers_UseExisting_1D2D.hxx +++ b/src/StdMeshers/StdMeshers_UseExisting_1D2D.hxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // SMESH SMESH : implementaion of SMESH idl descriptions // File : StdMeshers_UseExisting_1D2D.hxx // Module : SMESH diff --git a/src/StdMeshersGUI/Makefile.am b/src/StdMeshersGUI/Makefile.am index e8a194771..7e76cbe67 100644 --- a/src/StdMeshersGUI/Makefile.am +++ b/src/StdMeshersGUI/Makefile.am @@ -1,7 +1,4 @@ -# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -# -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ # # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + # SMESH StdMeshersGUI : GUI for StdMeshers plugin # File : Makefile.in # Author : Julia DOROVSKIKH @@ -96,7 +94,8 @@ libStdMeshersGUI_la_LDFLAGS = \ ../SMESHGUI/libSMESH.la \ ../OBJECT/libSMESHObject.la \ $(GUI_LDFLAGS) -lSalomeApp \ - $(CAS_LDPATH) -lTKernel -lTKBO -lTKAdvTools + $(CAS_LDPATH) -lTKernel -lTKBO -lTKAdvTools \ + $(QWT_LIBS) # resources files nodist_salomeres_DATA= \ diff --git a/src/StdMeshersGUI/SMESH_StdMeshersGUI.hxx b/src/StdMeshersGUI/SMESH_StdMeshersGUI.hxx index 78982bec9..5bd4940b7 100755 --- a/src/StdMeshersGUI/SMESH_StdMeshersGUI.hxx +++ b/src/StdMeshersGUI/SMESH_StdMeshersGUI.hxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : SMESH_StdMeshersGUI.hxx // Author : Alexander BORODIN, Open CASCADE S.A.S. // diff --git a/src/StdMeshersGUI/StdMeshersGUI.cxx b/src/StdMeshersGUI/StdMeshersGUI.cxx index f3e400e82..eb744f72a 100644 --- a/src/StdMeshersGUI/StdMeshersGUI.cxx +++ b/src/StdMeshersGUI/StdMeshersGUI.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI.cxx // Author : Alexander SOLOVYOV, Open CASCADE S.A.S. // SMESH includes diff --git a/src/StdMeshersGUI/StdMeshersGUI_DistrPreview.cxx b/src/StdMeshersGUI/StdMeshersGUI_DistrPreview.cxx index e26ffd7e1..b3b101afb 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_DistrPreview.cxx +++ b/src/StdMeshersGUI/StdMeshersGUI_DistrPreview.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_DistrPreview.cxx // Author : Open CASCADE S.A.S. // SMESH includes @@ -222,13 +223,13 @@ void StdMeshersGUI_DistrPreview::update() { SMESH::double_array* arr = 0; if( isTableFunc() ) - arr = h->BuildDistributionTab( myTableFunc, myNbSeg, ( int )myConv ); + arr = h->BuildDistributionTab( myTableFunc, myNbSeg, ( int )myConv ); else - arr = h->BuildDistributionExpr( myFunction.toLatin1().data(), myNbSeg, ( int )myConv ); + arr = h->BuildDistributionExpr( myFunction.toLatin1().data(), myNbSeg, ( int )myConv ); if( arr ) { - distr = *arr; - delete arr; + distr = *arr; + delete arr; } } } @@ -337,7 +338,7 @@ bool isCorrectArg( const Handle( Expr_GeneralExpression )& expr ) if( !name.IsNull() ) { if( name->GetName()!="t" ) - res = false; + res = false; } else res = isCorrectArg( sub ); @@ -421,15 +422,15 @@ bool StdMeshersGUI_DistrPreview::convert( double& v ) const #ifdef NO_CAS_CATCH OCC_CATCH_SIGNALS; #endif - // in StdMeshers_NumberOfSegments.cc - // const double PRECISION = 1e-7; - // - if(v < -7) v = -7.0; - v = pow( 10.0, v ); + // in StdMeshers_NumberOfSegments.cc + // const double PRECISION = 1e-7; + // + if(v < -7) v = -7.0; + v = pow( 10.0, v ); } catch(Standard_Failure) { - Handle(Standard_Failure) aFail = Standard_Failure::Caught(); - v = 0.0; - ok = false; + Handle(Standard_Failure) aFail = Standard_Failure::Caught(); + v = 0.0; + ok = false; } } break; diff --git a/src/StdMeshersGUI/StdMeshersGUI_DistrPreview.h b/src/StdMeshersGUI/StdMeshersGUI_DistrPreview.h index 87a9eb86e..76af1d743 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_DistrPreview.h +++ b/src/StdMeshersGUI/StdMeshersGUI_DistrPreview.h @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_DistrPreview.h // Author : Open CASCADE S.A.S. // diff --git a/src/StdMeshersGUI/StdMeshersGUI_DistrTable.cxx b/src/StdMeshersGUI/StdMeshersGUI_DistrTable.cxx index cc718ed66..7963dbe36 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_DistrTable.cxx +++ b/src/StdMeshersGUI/StdMeshersGUI_DistrTable.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,16 +19,18 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_DistrTable.cxx // Author : Open CASCADE S.A.S. // SMESH includes // #include "StdMeshersGUI_DistrTable.h" +#include + // Qt incldues #include #include -#include #include #include #include @@ -84,14 +86,14 @@ public: ~SpinBoxDelegate(); QWidget* createEditor( QWidget*, - const QStyleOptionViewItem&, - const QModelIndex& ) const; + const QStyleOptionViewItem&, + const QModelIndex& ) const; void setEditorData( QWidget*, const QModelIndex&) const; void setModelData( QWidget*, QAbstractItemModel*, - const QModelIndex& ) const; + const QModelIndex& ) const; void updateEditorGeometry( QWidget*, - const QStyleOptionViewItem&, - const QModelIndex& ) const; + const QStyleOptionViewItem&, + const QModelIndex& ) const; private: StdMeshersGUI_DistrTableFrame::Table* myTable; @@ -109,7 +111,7 @@ private: struct EditorData { int r, c; - QDoubleSpinBox* sb; + SMESHGUI_SpinBox* sb; EditorData() { reset(); } void reset() { r = -1; c = -1; sb = 0; } }; @@ -138,7 +140,7 @@ public: void addRow(); void deleteRow(); - void setEditor( int, int, QDoubleSpinBox* ); + void setEditor( int, int, SMESHGUI_SpinBox* ); protected: void closeEditor( QWidget*, QAbstractItemDelegate::EndEditHint ); @@ -173,21 +175,25 @@ StdMeshersGUI_DistrTableFrame::SpinBoxDelegate:: QWidget* StdMeshersGUI_DistrTableFrame::SpinBoxDelegate:: createEditor( QWidget* parent, - const QStyleOptionViewItem& /*option*/, - const QModelIndex& index ) const + const QStyleOptionViewItem& /*option*/, + const QModelIndex& index ) const { - QDoubleSpinBox* sb = new QDoubleSpinBox( parent ); + SMESHGUI_SpinBox* sb = new SMESHGUI_SpinBox( parent ); + + sb->setAcceptNames(false); // No Notebook variables allowed + double aMin = index.column() == StdMeshersGUI_DistrTableFrame::ArgColumn ? + myTable->argMinimum( index.row() ) : + myTable->funcMinimum( index.row() ); + double aMax = index.column() == StdMeshersGUI_DistrTableFrame::ArgColumn ? + myTable->argMaximum( index.row() ) : + myTable->funcMaximum( index.row() ); + double aStep = index.column() == StdMeshersGUI_DistrTableFrame::ArgColumn ? + myTable->argStep( index.row() ) : + myTable->funcStep( index.row() ); + sb->RangeStepAndValidator( aMin, aMax, aStep, "parametric_precision" ); sb->setFrame(false); - sb->setMinimum( index.column() == StdMeshersGUI_DistrTableFrame::ArgColumn ? - myTable->argMinimum( index.row() ) : - myTable->funcMinimum( index.row() ) ); - sb->setMaximum( index.column() == StdMeshersGUI_DistrTableFrame::ArgColumn ? - myTable->argMaximum( index.row() ) : - myTable->funcMaximum( index.row() ) ); - sb->setSingleStep( index.column() == StdMeshersGUI_DistrTableFrame::ArgColumn ? - myTable->argStep( index.row() ) : - myTable->funcStep( index.row() ) ); - myTable->setEditor( index.row(), index.column(), sb ); + + myTable->setEditor( index.row(), index.column(), sb ); return sb; } @@ -196,7 +202,7 @@ StdMeshersGUI_DistrTableFrame::SpinBoxDelegate:: setEditorData( QWidget* editor, const QModelIndex& index ) const { QString value = index.model()->data(index, Qt::DisplayRole).toString(); - QDoubleSpinBox* sb = static_cast(editor); + SMESHGUI_SpinBox* sb = static_cast(editor); bool bOk = false; double v = value.toDouble( &bOk ); @@ -208,17 +214,17 @@ setEditorData( QWidget* editor, const QModelIndex& index ) const void StdMeshersGUI_DistrTableFrame::SpinBoxDelegate:: setModelData( QWidget* editor, QAbstractItemModel* model, - const QModelIndex& index ) const + const QModelIndex& index ) const { - QDoubleSpinBox* sb = static_cast(editor); + SMESHGUI_SpinBox* sb = static_cast(editor); model->setData( index, QString::number( sb->value() ), Qt::DisplayRole ); } void StdMeshersGUI_DistrTableFrame::SpinBoxDelegate:: updateEditorGeometry( QWidget* editor, - const QStyleOptionViewItem& option, - const QModelIndex& /*index*/ ) const + const QStyleOptionViewItem& option, + const QModelIndex& /*index*/ ) const { editor->setGeometry( option.rect ); } @@ -247,7 +253,7 @@ Table( QWidget* parent, int rows ) void StdMeshersGUI_DistrTableFrame::Table:: -setEditor( int r, int c, QDoubleSpinBox* sb ) +setEditor( int r, int c, SMESHGUI_SpinBox* sb ) { myEditorData.r = r; myEditorData.c = c; @@ -530,9 +536,9 @@ StdMeshersGUI_DistrTableFrame( QWidget* parent ) connect( myButtons[ InsertRowBtn ], SIGNAL( clicked() ), this, SLOT( onInsert() ) ); connect( myButtons[ RemoveRowBtn ], SIGNAL( clicked() ), this, SLOT( onRemove() ) ); connect( myTable, SIGNAL( currentCellChanged( int, int, int, int ) ), - this, SIGNAL( currentChanged( int, int ) ) ); + this, SIGNAL( currentChanged( int, int ) ) ); connect( myTable, SIGNAL( cellChanged( int, int ) ), - this, SIGNAL( valueChanged( int, int ) ) ); + this, SIGNAL( valueChanged( int, int ) ) ); } StdMeshersGUI_DistrTableFrame:: diff --git a/src/StdMeshersGUI/StdMeshersGUI_DistrTable.h b/src/StdMeshersGUI/StdMeshersGUI_DistrTable.h index 11a4ab333..af68869b9 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_DistrTable.h +++ b/src/StdMeshersGUI/StdMeshersGUI_DistrTable.h @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_DistrTable.h // Author : Open CASCADE S.A.S. // diff --git a/src/StdMeshersGUI/StdMeshersGUI_FixedPointsParamWdg.cxx b/src/StdMeshersGUI/StdMeshersGUI_FixedPointsParamWdg.cxx index c5c228bc7..8b503af3d 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_FixedPointsParamWdg.cxx +++ b/src/StdMeshersGUI/StdMeshersGUI_FixedPointsParamWdg.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,14 +16,16 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_FixedPointsParamWdg.cxx // Author : Open CASCADE S.A.S. // SMESH includes // #include "StdMeshersGUI_FixedPointsParamWdg.h" -#include -#include +#include + +#include // Qt includes #include @@ -76,12 +75,13 @@ StdMeshersGUI_FixedPointsParamWdg::LineDelegate::LineDelegate( QTreeWidget* pare } QWidget* StdMeshersGUI_FixedPointsParamWdg::LineDelegate::createEditor( QWidget* parent, - const QStyleOptionViewItem& option, - const QModelIndex& index ) const + const QStyleOptionViewItem& option, + const QModelIndex& index ) const { QWidget* w = 0; if ( (index.column() == 1 ) ) { - QtxIntSpinBox* sb = new QtxIntSpinBox( parent ); + SalomeApp_IntSpinBox* sb = new SalomeApp_IntSpinBox( parent ); + sb->setAcceptNames( false ); // No Notebook variables allowed sb->setFrame( false ); sb->setRange( 1, 999); w = sb; @@ -91,11 +91,11 @@ QWidget* StdMeshersGUI_FixedPointsParamWdg::LineDelegate::createEditor( QWidget* } void StdMeshersGUI_FixedPointsParamWdg::LineDelegate::setModelData( QWidget* editor, - QAbstractItemModel* model, - const QModelIndex& index ) const + QAbstractItemModel* model, + const QModelIndex& index ) const { - model->setData( index, qobject_cast( editor )->value(), Qt::EditRole ); - model->setData( index, qobject_cast( editor )->value(), Qt::UserRole ); + model->setData( index, qobject_cast( editor )->value(), Qt::EditRole ); + model->setData( index, qobject_cast( editor )->value(), Qt::UserRole ); } //================================================================================ @@ -114,7 +114,7 @@ StdMeshersGUI_FixedPointsParamWdg myListWidget = new QListWidget( this ); myTreeWidget = new QTreeWidget( this ); - mySpinBox = new QtxDoubleSpinBox( this ); + mySpinBox = new SMESHGUI_SpinBox( this ); myAddButton = new QPushButton( tr( "SMESH_BUT_ADD" ), this ); myRemoveButton = new QPushButton( tr( "SMESH_BUT_REMOVE" ), this ); mySameValues = new QCheckBox( tr("SMESH_SAME_NB_SEGMENTS"), this); @@ -141,10 +141,8 @@ StdMeshersGUI_FixedPointsParamWdg myListWidget->setMinimumWidth( 80 ); myTreeWidget->setMinimumWidth( 200 ); - mySpinBox->setRange( 0, 1 ); - mySpinBox->setSingleStep( 0.1 ); - mySpinBox->setDecimals( 4 ); - mySpinBox->setPrecision( 4 ); + mySpinBox->setAcceptNames( false ); // No Notebook variables allowed + mySpinBox->RangeStepAndValidator( 0., 1., .1, "parametric_precision" ); myListWidget->setMinimumWidth( 70 ); connect( myAddButton, SIGNAL( clicked() ), SLOT( onAdd() ) ); @@ -205,7 +203,7 @@ void StdMeshersGUI_FixedPointsParamWdg::onAdd() { addPoint( mySpinBox->value() ); } - + //================================================================================= // function : onRemove() // purpose : Called when Remove Button Clicked @@ -264,7 +262,7 @@ void StdMeshersGUI_FixedPointsParamWdg::addPoint( double v) double lv = point( i ); if ( EQUAL_DBL(lv, v) ) { toInsert = false; break; } else if ( GT_DBL(lv, v) ) { - idx = i; break; + idx = i; break; } } if ( toInsert ) { @@ -292,7 +290,7 @@ void StdMeshersGUI_FixedPointsParamWdg::removePoints() delete myTreeWidget->topLevelItem( idx ); delete item; myTreeWidget->topLevelItem( idx )->setText( 0, treeItemText( idx == 0 ? 0 : point( idx-1 ), - idx > myListWidget->count()-1 ? 1 : point( idx ) ) ); + idx > myListWidget->count()-1 ? 1 : point( idx ) ) ); } onCheckBoxChanged(); updateState(); diff --git a/src/StdMeshersGUI/StdMeshersGUI_FixedPointsParamWdg.h b/src/StdMeshersGUI/StdMeshersGUI_FixedPointsParamWdg.h index 273781d34..0e421fe44 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_FixedPointsParamWdg.h +++ b/src/StdMeshersGUI/StdMeshersGUI_FixedPointsParamWdg.h @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_FixedPointsParamWdg.h // Author : Open CASCADE S.A.S. (dmv) // @@ -34,7 +32,7 @@ #include class SMESHGUI; -class QtxDoubleSpinBox; +class SMESHGUI_SpinBox; class QPushButton; class QLineEdit; class QCheckBox; @@ -84,7 +82,7 @@ private: private: QListWidget* myListWidget; QTreeWidget* myTreeWidget; - QtxDoubleSpinBox* mySpinBox; + SMESHGUI_SpinBox* mySpinBox; QPushButton* myAddButton; QPushButton* myRemoveButton; QCheckBox* mySameValues; diff --git a/src/StdMeshersGUI/StdMeshersGUI_LayerDistributionParamWdg.cxx b/src/StdMeshersGUI/StdMeshersGUI_LayerDistributionParamWdg.cxx index 5d187b6d0..b1ef69a5e 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_LayerDistributionParamWdg.cxx +++ b/src/StdMeshersGUI/StdMeshersGUI_LayerDistributionParamWdg.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_LayerDistributionParamWdg.cxx // Author : Open CASCADE S.A.S. // SMESH includes @@ -50,7 +51,7 @@ StdMeshersGUI_LayerDistributionParamWdg ::StdMeshersGUI_LayerDistributionParamWdg(SMESH::SMESH_Hypothesis_ptr hyp, - const QString& theName, + const QString& theName, QDialog* dlg): QWidget(), myName(theName), myDlg( dlg ) { diff --git a/src/StdMeshersGUI/StdMeshersGUI_LayerDistributionParamWdg.h b/src/StdMeshersGUI/StdMeshersGUI_LayerDistributionParamWdg.h index b47b122b1..c7e62c88a 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_LayerDistributionParamWdg.h +++ b/src/StdMeshersGUI/StdMeshersGUI_LayerDistributionParamWdg.h @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_LayerDistributionParamWdg.h // Author : Open CASCADE S.A.S. // @@ -51,7 +52,7 @@ class STDMESHERSGUI_EXPORT StdMeshersGUI_LayerDistributionParamWdg : public QWid public: StdMeshersGUI_LayerDistributionParamWdg(SMESH::SMESH_Hypothesis_ptr, - const QString&, + const QString&, QDialog*); ~StdMeshersGUI_LayerDistributionParamWdg(); diff --git a/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx b/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx index 2ee5473af..9fce3fe98 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx +++ b/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_NbSegmentsCreator.cxx // Author : Open CASCADE S.A.S. // SMESH includes @@ -149,7 +150,7 @@ QFrame* StdMeshersGUI_NbSegmentsCreator::buildFrame() // 3) scale myGroupLayout->addWidget( myLScale = new QLabel( tr( "SMESH_NB_SEGMENTS_SCALE_PARAM" ), GroupC1 ), row, 0 ); myScale = new SMESHGUI_SpinBox( GroupC1 ); - myScale->RangeStepAndValidator( 1E-5, 1E+5, 0.1, 6 ); + myScale->RangeStepAndValidator( 1E-5, 1E+5, 0.1, "parametric_precision" ); myGroupLayout->addWidget( myScale, row, 1 ); row++; diff --git a/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.h b/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.h index 6053e8d34..f50b19433 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.h +++ b/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.h @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_NbSegmentsCreator.h // Author : Open CASCADE S.A.S. // diff --git a/src/StdMeshersGUI/StdMeshersGUI_ObjectReferenceParamWdg.cxx b/src/StdMeshersGUI/StdMeshersGUI_ObjectReferenceParamWdg.cxx index 37a3ce7ee..06f2431ec 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_ObjectReferenceParamWdg.cxx +++ b/src/StdMeshersGUI/StdMeshersGUI_ObjectReferenceParamWdg.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_ObjectReferenceParamWdg.cxx // Author : Open CASCADE S.A.S. // SMESH includes diff --git a/src/StdMeshersGUI/StdMeshersGUI_ObjectReferenceParamWdg.h b/src/StdMeshersGUI/StdMeshersGUI_ObjectReferenceParamWdg.h index 62e5096af..c5fabc25e 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_ObjectReferenceParamWdg.h +++ b/src/StdMeshersGUI/StdMeshersGUI_ObjectReferenceParamWdg.h @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_ObjectReferenceParamWdg.h // Author : Open CASCADE S.A.S. // diff --git a/src/StdMeshersGUI/StdMeshersGUI_StdHypothesisCreator.cxx b/src/StdMeshersGUI/StdMeshersGUI_StdHypothesisCreator.cxx index 0d72900dc..8fd24f351 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_StdHypothesisCreator.cxx +++ b/src/StdMeshersGUI/StdMeshersGUI_StdHypothesisCreator.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_StdHypothesisCreator.cxx // Author : Alexander SOLOVYOV, Open CASCADE S.A.S. // SMESH includes @@ -999,13 +1000,15 @@ bool StdMeshersGUI_StdHypothesisCreator::stdParams( ListOfStdParams& p ) const anEntry = h->GetObjectEntry(); aDirectionWidget->SetGeomShapeEntry( anEntry ); aDirectionWidget->SetMainShapeEntry( aMainEntry ); - SMESH::long_array_var aVec = new SMESH::long_array; - int vertID = h->GetTriaVertex(); - if(vertID>0) { - aVec->length(1); - aVec[0] = vertID; + if ( !isCreation() ) { + SMESH::long_array_var aVec = new SMESH::long_array; + int vertID = h->GetTriaVertex(); + if(vertID>0) { + aVec->length(1); + aVec[0] = vertID; + aDirectionWidget->SetListOfIDs( aVec ); + } } - aDirectionWidget->SetListOfIDs( aVec ); aDirectionWidget->showPreview( true ); customWidgets()->append ( aDirectionWidget ); } @@ -1028,38 +1031,38 @@ void StdMeshersGUI_StdHypothesisCreator::attuneStdWidget (QWidget* w, const int) if( hypType()=="LocalLength" && sb ) { if (sb->objectName() == tr("SMESH_LOCAL_LENGTH_PARAM")) - sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, 6 ); + sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, "length_precision" ); else if (sb->objectName() == tr("SMESH_LOCAL_LENGTH_PRECISION")) - sb->RangeStepAndValidator( 0.0, 1.0, 0.05, 7 ); + sb->RangeStepAndValidator( 0.0, 1.0, 0.05, "len_tol_precision" ); } else if( hypType()=="Arithmetic1D" && sb ) { - sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, 6 ); + sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, "parametric_precision" ); } else if( hypType()=="MaxLength" && sb ) { - sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, 6 ); + sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, "length_precision" ); sb->setEnabled( !widget< QCheckBox >( 1 )->isChecked() ); } else if( hypType()=="MaxElementArea" && sb ) { - sb->RangeStepAndValidator( VALUE_SMALL_2, VALUE_MAX_2, 1.0, 6 ); + sb->RangeStepAndValidator( VALUE_SMALL_2, VALUE_MAX_2, 1.0, "area_precision" ); } else if( hypType()=="MaxElementVolume" && sb ) { - sb->RangeStepAndValidator( VALUE_SMALL_3, VALUE_MAX_3, 1.0, 6 ); + sb->RangeStepAndValidator( VALUE_SMALL_3, VALUE_MAX_3, 1.0, "vol_precision" ); } else if( hypType()=="StartEndLength" && sb ) { - sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, 6 ); + sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, "length_precision" ); } else if( hypType()=="Deflection1D" && sb ) { - sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, 6 ); + sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, "parametric_precision" ); } else if ( sb ) // default validator for possible ancestors { - sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, 6 ); + sb->RangeStepAndValidator( VALUE_SMALL, VALUE_MAX, 1.0, "length_precision" ); } } diff --git a/src/StdMeshersGUI/StdMeshersGUI_StdHypothesisCreator.h b/src/StdMeshersGUI/StdMeshersGUI_StdHypothesisCreator.h index 0973c5c03..1f693be44 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_StdHypothesisCreator.h +++ b/src/StdMeshersGUI/StdMeshersGUI_StdHypothesisCreator.h @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -19,6 +19,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_StdHypothesisCreator.h // Author : Alexander SOLOVYOV, Open CASCADE S.A.S. // diff --git a/src/StdMeshersGUI/StdMeshersGUI_SubShapeSelectorWdg.cxx b/src/StdMeshersGUI/StdMeshersGUI_SubShapeSelectorWdg.cxx index 65b99514e..4bc2b7549 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_SubShapeSelectorWdg.cxx +++ b/src/StdMeshersGUI/StdMeshersGUI_SubShapeSelectorWdg.cxx @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,11 +16,11 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_SubShapeSelectorWdg.cxx // Author : Open CASCADE S.A.S. (dmv) // SMESH includes // - #include "StdMeshersGUI_SubShapeSelectorWdg.h" // SMESH Includes @@ -83,7 +80,7 @@ StdMeshersGUI_SubShapeSelectorWdg ::StdMeshersGUI_SubShapeSelectorWdg( QWidget * parent ): QWidget( parent ), myPreviewActor( 0 ), - myMaxSize( 0 ) + myMaxSize( -1 ) { QPixmap image0( SMESH::GetResourceMgr( mySMESHGUI )->loadPixmap( "SMESH", tr( "ICON_SELECT" ) ) ); @@ -146,6 +143,9 @@ void StdMeshersGUI_SubShapeSelectorWdg::init() myListOfIDs.clear(); mySelectedIDs.clear(); + myAddButton->setEnabled( false ); + myRemoveButton->setEnabled( false ); + mySMESHGUI = SMESHGUI::GetSMESHGUI(); mySelectionMgr = SMESH::GetSelectionMgr( mySMESHGUI ); mySelector = (SMESH::GetViewWindow( mySMESHGUI ))->GetSelector(); @@ -199,63 +199,76 @@ void StdMeshersGUI_SubShapeSelectorWdg::SelectionIntoArgument() mySelectionMgr->selectedObjects( aList ); int nbSel = aList.Extent(); - if (nbSel < 1) - return; - - SALOME_ListIteratorOfListIO anIt (aList); + if (nbSel > 0) { + SALOME_ListIteratorOfListIO anIt (aList); - for ( ; anIt.More(); anIt.Next()) { // Loop on selected objects - Handle(SALOME_InteractiveObject) IO = anIt.Value(); - - GEOM::GEOM_Object_var aGeomObj = GetGeomObjectByEntry( IO->getEntry() ); - if ( !CORBA::is_nil( aGeomObj ) ) { // Selected Object From Study - GEOM::GEOM_Object_ptr aGeomFatherObj = aGeomObj->GetMainShape(); - QString aFatherEntry = ""; - QString aMainFatherEntry = ""; - TopoDS_Shape shape; - if ( !CORBA::is_nil( aGeomFatherObj ) ) { - // Get Main Shape - GEOM::GEOM_Object_var aGeomMain = GetGeomObjectByEntry( myEntry ); - if ( !CORBA::is_nil( aGeomMain ) && aGeomMain->GetType() == 37 ) { // Main Shape is a Group - GEOM::GEOM_Object_ptr aMainFatherObj = aGeomMain->GetMainShape(); - if ( !CORBA::is_nil( aMainFatherObj ) ) - aMainFatherEntry = aMainFatherObj->GetStudyEntry(); - } - aFatherEntry = aGeomFatherObj->GetStudyEntry(); - } + for ( ; anIt.More(); anIt.Next()) { // Loop on selected objects + Handle(SALOME_InteractiveObject) IO = anIt.Value(); - if ( aFatherEntry != "" && ( aFatherEntry == myEntry || aFatherEntry == aMainFatherEntry ) ) { - if ( aGeomObj->GetType() == 37 /*GEOM_GROUP*/ ) { // Selected Group that belongs the main object - GEOMBase::GetShape(aGeomObj, shape); - if ( !shape.IsNull() ) { - TopExp_Explorer exp( shape, mySubShType ); - for ( ; exp.More(); exp.Next() ) { - int index = myPreviewActor->GetIndexByShape( exp.Current() ); - if ( index ) { - mySelectedIDs.append( index ); - myPreviewActor->HighlightID( index ); - } - } - } - } else if ( aGeomObj->GetType() == 28 /*GEOM_SUBSHAPE*/ ) { - GEOMBase::GetShape(aGeomObj, shape); - if ( !shape.IsNull() && shape.ShapeType() == mySubShType ) { - int index = myPreviewActor->GetIndexByShape( shape ); - if ( index ) { - mySelectedIDs.append( index ); - myPreviewActor->HighlightID( index ); - } - } - } + GEOM::GEOM_Object_var aGeomObj = GetGeomObjectByEntry( IO->getEntry() ); + if ( !CORBA::is_nil( aGeomObj ) ) { // Selected Object From Study + GEOM::GEOM_Object_ptr aGeomFatherObj = aGeomObj->GetMainShape(); + QString aFatherEntry = ""; + QString aMainFatherEntry = ""; + TopoDS_Shape shape; + if ( !CORBA::is_nil( aGeomFatherObj ) ) { + // Get Main Shape + GEOM::GEOM_Object_var aGeomMain = GetGeomObjectByEntry( myEntry ); + if ( !CORBA::is_nil( aGeomMain ) && aGeomMain->GetType() == 37 ) { // Main Shape is a Group + GEOM::GEOM_Object_ptr aMainFatherObj = aGeomMain->GetMainShape(); + if ( !CORBA::is_nil( aMainFatherObj ) ) + aMainFatherEntry = aMainFatherObj->GetStudyEntry(); + } + aFatherEntry = aGeomFatherObj->GetStudyEntry(); + } + + if ( aFatherEntry != "" && ( aFatherEntry == myEntry || aFatherEntry == aMainFatherEntry ) ) { + if ( aGeomObj->GetType() == 37 /*GEOM_GROUP*/ ) { // Selected Group that belongs the main object + GEOMBase::GetShape(aGeomObj, shape); + if ( !shape.IsNull() ) { + TopExp_Explorer exp( shape, mySubShType ); + for ( ; exp.More(); exp.Next() ) { + int index = myPreviewActor->GetIndexByShape( exp.Current() ); + if ( index ) { + mySelectedIDs.append( index ); + myPreviewActor->HighlightID( index ); + } + } + } + } else if ( aGeomObj->GetType() == 28 /*GEOM_SUBSHAPE*/ ) { + GEOMBase::GetShape(aGeomObj, shape); + if ( !shape.IsNull() && shape.ShapeType() == mySubShType ) { + int index = myPreviewActor->GetIndexByShape( shape ); + if ( index ) { + mySelectedIDs.append( index ); + myPreviewActor->HighlightID( index ); + } + } + } + } + } else { // Selected Actor from Actor Collection + QString anEntry = IO->getEntry(); + QString str = "_"; + int index = anEntry.lastIndexOf( str ); + anEntry.remove(0, index+1); + int ind = anEntry.toInt(); + if ( ind ) + mySelectedIDs.append( ind ); } - } else { // Selected Actor from Actor Collection - QString anEntry = IO->getEntry(); - QString str = "_"; - int index = anEntry.lastIndexOf( str ); - anEntry.remove(0, index+1); - int ind = anEntry.toInt(); - if ( ind ) - mySelectedIDs.append( ind ); + } + } + // update add button + myAddButton->setEnabled( myListWidget->count() < myMaxSize && mySelectedIDs.size() > 0 && ( mySelectedIDs.size() <= myMaxSize || myMaxSize == -1 ) ); + + //Connect Selected Ids in viewer and dialog's Ids list + myListWidget->clearSelection(); + if ( mySelectedIDs.size() > 0 ) { + for (int i = 0; i < mySelectedIDs.size(); i++) { + QString anID = QString(" %1").arg( mySelectedIDs.at(i) ); + QList anItems = myListWidget->findItems ( anID, Qt::MatchExactly ); + QListWidgetItem* item; + foreach(item, anItems) + item->setSelected(true); } } } @@ -270,7 +283,7 @@ void StdMeshersGUI_SubShapeSelectorWdg::onAdd() return; myListWidget->blockSignals( true ); - for (int i = 0; i < mySelectedIDs.size() && (myMaxSize < 1 || myListOfIDs.size() < myMaxSize); i++) { + for (int i = 0; i < mySelectedIDs.size() && (myMaxSize == -1 || myListOfIDs.size() < myMaxSize); i++) { if ( myListOfIDs.indexOf( mySelectedIDs.at(i) ) == -1 ) { QString anID = QString(" %1").arg( mySelectedIDs.at(i) ); @@ -282,9 +295,9 @@ void StdMeshersGUI_SubShapeSelectorWdg::onAdd() } onListSelectionChanged(); myListWidget->blockSignals( false ); - myAddButton->setEnabled( myListOfIDs.size() < myMaxSize ); + myAddButton->setEnabled( myMaxSize == -1 || myListOfIDs.size() < myMaxSize ); } - + //================================================================================= // function : onRemove() // purpose : Called when Remove Button Clicked @@ -327,6 +340,9 @@ void StdMeshersGUI_SubShapeSelectorWdg::onListSelectionChanged() QListWidgetItem* anItem; foreach(anItem, selItems) myPreviewActor->HighlightID( anItem->text().toInt() ); + + // update remove button + myRemoveButton->setEnabled( selItems.size() > 0 ); } //================================================================================= @@ -355,8 +371,7 @@ void StdMeshersGUI_SubShapeSelectorWdg::updateState() state = true; myListWidget->setEnabled( state ); - myAddButton->setEnabled( state ); - myRemoveButton->setEnabled( state ); + myAddButton->setEnabled( mySelectedIDs.size() > 0 ); if (state) { myPreviewActor = new SMESH_PreviewActorsCollection(); @@ -421,7 +436,7 @@ SMESH::long_array_var StdMeshersGUI_SubShapeSelectorWdg::GetListOfIDs() anArray->length( size ); if ( size ) { for (int i = 0; i < size; i++) { - anArray[i] = myListOfIDs.at(i); + anArray[i] = myListOfIDs.at(i); } } return anArray; diff --git a/src/StdMeshersGUI/StdMeshersGUI_SubShapeSelectorWdg.h b/src/StdMeshersGUI/StdMeshersGUI_SubShapeSelectorWdg.h index 49e49e82a..b29840bdf 100644 --- a/src/StdMeshersGUI/StdMeshersGUI_SubShapeSelectorWdg.h +++ b/src/StdMeshersGUI/StdMeshersGUI_SubShapeSelectorWdg.h @@ -1,7 +1,4 @@ -// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE -// -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public @@ -19,6 +16,7 @@ // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // + // File : StdMeshersGUI_SubShapeSelectorWdg.h // Author : Open CASCADE S.A.S. (dmv) // diff --git a/src/StdMeshersGUI/StdMeshers_images.ts b/src/StdMeshersGUI/StdMeshers_images.ts index 7438aa85e..fa4ca5767 100644 --- a/src/StdMeshersGUI/StdMeshers_images.ts +++ b/src/StdMeshersGUI/StdMeshers_images.ts @@ -1,6 +1,6 @@

Quadrangle Preference

Triangle Preference

Saving user's preferred GHS3DPRL Advanced Parameters

Tepal_V2.0 and MPI use.

TUI use.

Change priority of submeshes in Mesh

Editing of a mesh

Radial Quadrangle 1D2D example

Quadrangle Parameters example

Scale

Symmetry

Find Element by Point