From aa4950ef939333c7c16ff7635fd7b0be01ae3837 Mon Sep 17 00:00:00 2001 From: azv Date: Wed, 15 Mar 2017 13:44:12 +0300 Subject: [PATCH] Test model for issue #1823 --- test.models/ecran.py | 1055 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1055 insertions(+) create mode 100644 test.models/ecran.py diff --git a/test.models/ecran.py b/test.models/ecran.py new file mode 100644 index 000000000..1c2fdc519 --- /dev/null +++ b/test.models/ecran.py @@ -0,0 +1,1055 @@ +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_1 = Sketch_1.addLine(55.1, 10.3, 55.1, 0.3) +SketchLine_2 = Sketch_1.addLine(55.1, 0.3, 2.300000098190561, 0.3) +SketchLine_2.setName("SketchLine_10") +SketchLine_2.result().setName("SketchLine_10") +SketchLine_3 = Sketch_1.addLine(55.1, 0.3, 0.3, 0.3) +SketchLine_3.setName("SketchLine_2") +SketchLine_3.result().setName("SketchLine_2") +SketchLine_3.setAuxiliary(True) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint()) +SketchLine_4 = Sketch_1.addLine(0.3, 2.299999958617008, 0.3, 10.3) +SketchLine_4.setName("SketchLine_11") +SketchLine_4.result().setName("SketchLine_11") +SketchLine_5 = Sketch_1.addLine(2.299981065494142, -1.390467145968888e-034, 55.4, -3.349267313974575e-033) +SketchLine_5.setName("SketchLine_12") +SketchLine_5.result().setName("SketchLine_12") +SketchLine_6 = Sketch_1.addLine(0.3, 0.3, 0.3, 10.3) +SketchLine_6.setName("SketchLine_3") +SketchLine_6.result().setName("SketchLine_3") +SketchLine_6.setAuxiliary(True) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_6.startPoint()) +SketchLine_7 = Sketch_1.addLine(0, 10.3, 0, 2.300013086422291) +SketchLine_7.setName("SketchLine_13") +SketchLine_7.result().setName("SketchLine_13") +SketchLine_8 = Sketch_1.addLine(0.3, 10.3, 0, 10.3) +SketchLine_8.setName("SketchLine_4") +SketchLine_8.result().setName("SketchLine_4") +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint()) +SketchLine_9 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ")) +SketchLine_9.setName("SketchLine_5") +SketchLine_9.result().setName("SketchLine_5") +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.result()) +SketchLine_10 = Sketch_1.addLine(0, 10.3, 0, -3.349267313974575e-033) +SketchLine_10.setName("SketchLine_6") +SketchLine_10.result().setName("SketchLine_6") +SketchLine_10.setAuxiliary(True) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint()) +SketchLine_11 = Sketch_1.addLine(0, -3.349267313974575e-033, 55.4, -3.349267313974575e-033) +SketchLine_11.setName("SketchLine_7") +SketchLine_11.result().setName("SketchLine_7") +SketchLine_11.setAuxiliary(True) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint()) +SketchLine_12 = Sketch_1.addLine(55.4, -3.349267313974575e-033, 55.4, 10.3) +SketchLine_12.setName("SketchLine_8") +SketchLine_12.result().setName("SketchLine_8") +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint()) +SketchLine_13 = Sketch_1.addLine(55.4, 10.3, 55.1, 10.3) +SketchLine_13.setName("SketchLine_9") +SketchLine_13.result().setName("SketchLine_9") +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint()) +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_13.endPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_13.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_8.result()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_11.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_12.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result()) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 10) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_13.result(), 0.3) +SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.result(), SketchLine_11.endPoint(), 0.3) +SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.result(), SketchLine_1.startPoint()) +SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_11.result(), 55.4) +SketchConstraintLength_3.setName("SketchConstraintLength_5") +SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_10.result()) +SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 0.3) +SketchArc_1 = Sketch_1.addArc(2.3, 2.3, 0.3, 2.299999958617008, 2.300000098190561, 0.3, False) +SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_4.startPoint()) +SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.endPoint()) +SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_2.result()) +SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_4.result()) +SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_4.endPoint()) +SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.result()) +SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_6.result()) +SketchArc_2 = Sketch_1.addArc(2.3, 2.3, 0, 2.300013086422291, 2.299981065494142, -1.390467145968888e-034, False) +SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_7.endPoint()) +SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_5.startPoint()) +SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_5.result()) +SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_7.result()) +SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_5.endPoint()) +SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_11.result()) +SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_10.result()) +SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 2) +SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 2.3) +SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_5.result(), SketchLine_9.startPoint()) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.") +Extrusion_1.setName("Profil") +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7")) +SketchLine_14 = Sketch_2.addLine(149.5, -2.299981065494, 153.5, -2.299981065494142) +SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1")) +SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_1.result()) +SketchLine_15 = Sketch_2.addLine(153.5, -2.299981065494142, 153.5, 7.700018934505839) +SketchLine_16 = Sketch_2.addLine(153.5, 7.700018934505839, 149.5, 7.700018934505839) +SketchLine_17 = Sketch_2.addLine(149.5, 7.700018934505839, 149.5, -2.299981065494) +SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_14.startPoint()) +SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint()) +SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint()) +SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint()) +SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_14.result()) +SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_15.result()) +SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_16.result()) +SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_17.result()) +SketchLine_18 = Sketch_2.addLine(-149.5, -2.299981065494142, -153.5, -2.299981065494142) +SketchLine_19 = Sketch_2.addLine(-153.5, -2.299981065494142, -153.5, 7.700018934505858) +SketchLine_20 = Sketch_2.addLine(-153.5, 7.700018934505858, -149.5, 7.700018934505858) +SketchLine_21 = Sketch_2.addLine(-149.5, 7.700018934505858, -149.5, -2.299981065494142) +SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchLine_18.startPoint()) +SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint()) +SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint()) +SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint()) +SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_18.result()) +SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_19.result()) +SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_20.result()) +SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_21.result()) +SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_20.result()) +SketchConstraintLength_5 = Sketch_2.setLength(SketchLine_21.result(), 10) +SketchConstraintLength_5.setName("SketchConstraintLength_6") +SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_16.endPoint(), SketchLine_21.result(), 299) +SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_20.result()) +SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1")) +SketchPoint_2.setName("SketchPoint_4") +SketchPoint_2.result().setName("SketchPoint_4") +SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchPoint_2.coordinates()) +SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39") +model.do() +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_1.setName("Decoupe_Angle") +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8")) +SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.300000000000011) +SketchLine_22.setName("SketchLine_29") +SketchLine_22.result().setName("SketchLine_29") +SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8")) +SketchPoint_3.setName("SketchPoint_5") +SketchPoint_3.result().setName("SketchPoint_5") +SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchPoint_3.result()) +SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_40") +SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8")) +SketchLine_23.setName("SketchLine_30") +SketchLine_23.result().setName("SketchLine_30") +SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.result()) +SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_41") +SketchLine_24 = Sketch_3.addLine(153.5, -8.300000000000011, 151.5, -10.3) +SketchLine_24.setName("SketchLine_31") +SketchLine_24.result().setName("SketchLine_31") +SketchConstraintCoincidence_37 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_24.startPoint()) +SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_42") +SketchLine_25 = Sketch_3.addLine(151.5, -10.3, 153.5, -10.3) +SketchLine_25.setName("SketchLine_33") +SketchLine_25.result().setName("SketchLine_33") +SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint()) +SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_44") +SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchLine_25.endPoint()) +SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_45") +SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchLine_25.endPoint()) +SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_46") +SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_25.endPoint()) +SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_47") +SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_25.result(), 2) +SketchConstraintLength_6.setName("SketchConstraintLength_8") +SketchConstraintAngle_1 = Sketch_3.setAngleBackward(SketchLine_24.result(), SketchLine_25.result(), 45) +SketchConstraintAngle_1.setName("SketchConstraintAngle_2") +SketchLine_26 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_8")) +SketchLine_26.setName("SketchLine_34") +SketchLine_26.result().setName("SketchLine_34") +SketchConstraintMirror_1_objects = [SketchLine_22.result(), SketchLine_25.result(), SketchLine_24.result()] +SketchConstraintMirror_1 = Sketch_3.addMirror(SketchLine_26.result(), SketchConstraintMirror_1_objects) +[SketchLine_27, SketchLine_28, SketchLine_29] = SketchConstraintMirror_1.mirrored() +SketchLine_29.setName("SketchLine_32") +SketchLine_29.result().setName("SketchLine_32") +model.do() +Sketch_3.setName("Sketch_4") +Sketch_3.result().setName("Sketch_4") +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_2.setName("Chamfrein_1") +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_6")) +SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.300000000000003) +SketchLine_30.setName("SketchLine_35") +SketchLine_30.result().setName("SketchLine_35") +SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_10&ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_5")) +SketchPoint_4.setName("SketchPoint_6") +SketchPoint_4.result().setName("SketchPoint_6") +SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchPoint_4.result()) +SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43") +SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_10&ExtrusionCut_1_1/Modfied_6")) +SketchLine_31.setName("SketchLine_36") +SketchLine_31.result().setName("SketchLine_36") +SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result()) +SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_48") +SketchLine_32 = Sketch_4.addLine(-149.5, 8.300000000000003, -147.5, 10.3) +SketchLine_32.setName("SketchLine_37") +SketchLine_32.result().setName("SketchLine_37") +SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_32.startPoint()) +SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_49") +SketchLine_33 = Sketch_4.addLine(-147.5, 10.3, -149.5, 10.3) +SketchLine_33.setName("SketchLine_38") +SketchLine_33.result().setName("SketchLine_38") +SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_32.endPoint(), SketchLine_33.startPoint()) +SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_50") +SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_33.endPoint()) +SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_51") +SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchLine_33.endPoint()) +SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_52") +SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_33.endPoint()) +SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_53") +SketchConstraintHorizontal_9 = Sketch_4.setHorizontal(SketchLine_33.result()) +SketchConstraintAngle_2 = Sketch_4.setAngleBackward(SketchLine_30.result(), SketchLine_32.result(), 45) +SketchConstraintAngle_2.setName("SketchConstraintAngle_3") +SketchConstraintLength_7 = Sketch_4.setLength(SketchLine_33.result(), 2) +SketchLine_34 = Sketch_4.addLine(0, 0, 0, 100) +SketchLine_34.setName("SketchLine_39") +SketchLine_34.result().setName("SketchLine_39") +SketchConstraintMirror_2_objects = [SketchLine_32.result(), SketchLine_33.result(), SketchLine_30.result()] +SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_34.result(), SketchConstraintMirror_2_objects) +[SketchLine_35, SketchLine_36, SketchLine_37] = SketchConstraintMirror_2.mirrored() +SketchLine_37.setName("SketchLine_42") +SketchLine_37.result().setName("SketchLine_42") +SketchLine_36.setName("SketchLine_41") +SketchLine_36.result().setName("SketchLine_41") +SketchLine_35.setName("SketchLine_40") +SketchLine_35.result().setName("SketchLine_40") +SketchConstraintRigid_1 = Sketch_4.setFixed(SketchLine_34.result()) +SketchConstraintRigid_1.setName("SketchConstraintRigid_12") +SketchLine_38 = Sketch_4.addLine(153.5, 5.5, -100.5, 5.5) +SketchLine_38.setName("SketchLine_43") +SketchLine_38.result().setName("SketchLine_43") +SketchLine_38.setAuxiliary(True) +SketchConstraintHorizontal_10 = Sketch_4.setHorizontal(SketchLine_38.result()) +SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_2_1/Modfied_2")) +SketchLine_39 = SketchProjection_1.createdFeature() +SketchLine_39.setName("SketchLine_44") +SketchLine_39.result().setName("SketchLine_44") +SketchConstraintDistance_3 = Sketch_4.setDistance(SketchLine_38.result(), SketchAPI_Line(SketchLine_39).endPoint(), 5.5) +SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_38.startPoint(), SketchLine_39.result()) +SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_54") +SketchCircle_1 = Sketch_4.addCircle(100.5, 5.5, 1.5) +SketchConstraintRadius_3 = Sketch_4.setRadius(SketchCircle_1.results()[1], 1.5) +SketchCircle_2 = Sketch_4.addCircle(33.5, 5.5, 1.5) +SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchCircle_2.center(), SketchLine_38.result()) +SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_55") +SketchCircle_3 = Sketch_4.addCircle(-33.5, 5.5, 1.506545921898) +SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchCircle_3.center(), SketchLine_38.result()) +SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_56") +SketchCircle_4 = Sketch_4.addCircle(-100.5, 5.5, 1.506545921898) +SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchCircle_4.center(), SketchLine_38.result()) +SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_57") +SketchConstraintEqual_2 = Sketch_4.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1]) +SketchConstraintEqual_3 = Sketch_4.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1]) +SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchCircle_1.center(), SketchLine_38.result()) +SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_58") +SketchConstraintDistance_4 = Sketch_4.setDistance(SketchCircle_4.center(), SketchCircle_3.center(), 67) +SketchConstraintDistance_5 = Sketch_4.setDistance(SketchCircle_3.center(), SketchCircle_2.center(), 67) +SketchConstraintDistance_6 = Sketch_4.setDistance(SketchCircle_2.center(), SketchCircle_1.center(), 67) +SketchConstraintDistance_7 = Sketch_4.setDistance(SketchLine_39.result(), SketchCircle_1.center(), 53) +SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchLine_38.endPoint(), SketchCircle_4.center()) +SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_59") +model.do() +Sketch_4.setName("Sketch_5") +Sketch_4.result().setName("Sketch_5") +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_8")) +SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714) +SketchLine_40.setName("SketchLine_58") +SketchLine_40.result().setName("SketchLine_58") +SketchLine_41 = Sketch_5.addLine(152.2999838292651, -45.04999053274704, 153.5, -45.04999053274702) +SketchLine_41.setName("SketchLine_57") +SketchLine_41.result().setName("SketchLine_57") +SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_8")) +SketchLine_42.setName("SketchLine_46") +SketchLine_42.result().setName("SketchLine_46") +SketchLine_43 = Sketch_5.addLine(150.8, -45.04999053274702, 153.5, -45.04999053274702) +SketchLine_43.setName("SketchLine_45") +SketchLine_43.result().setName("SketchLine_45") +SketchLine_43.setAuxiliary(True) +SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_42.result()) +SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_60") +SketchLine_44 = Sketch_5.addLine(153.5, -45.04999053274702, 153.5, -37.04999053274702) +SketchLine_44.setName("SketchLine_47") +SketchLine_44.result().setName("SketchLine_47") +SketchLine_45 = Sketch_5.addLine(150.8000000000001, -14.54997391609652, 150.8000000000001, -19.54999029833178) +SketchLine_45.setName("SketchLine_61") +SketchLine_45.result().setName("SketchLine_61") +SketchLine_46 = Sketch_5.addLine(153.5, -13.04999053274714, 152.2999838654776, -13.04999053274697) +SketchLine_46.setName("SketchLine_60") +SketchLine_46.result().setName("SketchLine_60") +SketchLine_47 = Sketch_5.addLine(150.8, -37.04999053274702, 150.8, -45.04999053274702) +SketchLine_47.setName("SketchLine_49") +SketchLine_47.result().setName("SketchLine_49") +SketchLine_47.setAuxiliary(True) +SketchConstraintCoincidence_56 = Sketch_5.setCoincident(SketchLine_47.endPoint(), SketchLine_43.startPoint()) +SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_61") +SketchConstraintCoincidence_57 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_44.startPoint()) +SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_62") +SketchLine_48 = Sketch_5.addLine(153.5, -37.04999053274702, 150.8, -37.04999053274702) +SketchLine_48.setAuxiliary(True) +SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_44.endPoint(), SketchLine_48.startPoint()) +SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_63") +SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchLine_48.endPoint(), SketchLine_47.startPoint()) +SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_64") +SketchConstraintHorizontal_11 = Sketch_5.setHorizontal(SketchLine_43.result()) +SketchConstraintVertical_9 = Sketch_5.setVertical(SketchLine_44.result()) +SketchConstraintHorizontal_12 = Sketch_5.setHorizontal(SketchLine_48.result()) +SketchConstraintVertical_10 = Sketch_5.setVertical(SketchLine_47.result()) +SketchLine_49 = Sketch_5.addLine(153.5, -37.04999053274702, 152.2999989299055, -37.04999053274738) +SketchLine_49.setName("SketchLine_62") +SketchLine_49.result().setName("SketchLine_62") +SketchLine_50 = Sketch_5.addLine(150.8, -38.54997391988981, 150.8000000000001, -43.54998998548124) +SketchLine_50.setName("SketchLine_63") +SketchLine_50.result().setName("SketchLine_63") +SketchLine_51 = Sketch_5.addLine(150.7999999999999, -21.04999053274714, 153.5, -21.04999053274714) +SketchLine_51.setName("SketchLine_50") +SketchLine_51.result().setName("SketchLine_50") +SketchLine_51.setAuxiliary(True) +SketchConstraintCoincidence_60 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_42.result()) +SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_65") +SketchLine_52 = Sketch_5.addLine(153.5, -21.04999053274714, 153.5, -13.04999053274714) +SketchLine_52.setName("SketchLine_51") +SketchLine_52.result().setName("SketchLine_51") +SketchLine_53 = Sketch_5.addLine(150.7999999999999, -13.04999053274714, 150.7999999999999, -21.04999053274714) +SketchLine_53.setAuxiliary(True) +SketchConstraintCoincidence_61 = Sketch_5.setCoincident(SketchLine_53.endPoint(), SketchLine_51.startPoint()) +SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_66") +SketchConstraintCoincidence_62 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_52.startPoint()) +SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_67") +SketchLine_54 = Sketch_5.addLine(153.5, -13.04999053274714, 150.7999999999999, -13.04999053274714) +SketchLine_54.setName("SketchLine_52") +SketchLine_54.result().setName("SketchLine_52") +SketchLine_54.setAuxiliary(True) +SketchConstraintCoincidence_63 = Sketch_5.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint()) +SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_68") +SketchConstraintCoincidence_64 = Sketch_5.setCoincident(SketchLine_54.endPoint(), SketchLine_53.startPoint()) +SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_69") +SketchConstraintHorizontal_13 = Sketch_5.setHorizontal(SketchLine_51.result()) +SketchConstraintVertical_11 = Sketch_5.setVertical(SketchLine_52.result()) +SketchConstraintHorizontal_14 = Sketch_5.setHorizontal(SketchLine_54.result()) +SketchConstraintVertical_12 = Sketch_5.setVertical(SketchLine_53.result()) +SketchConstraintCoincidence_65 = Sketch_5.setCoincident(SketchLine_47.result(), SketchLine_53.endPoint()) +SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_70") +SketchConstraintLength_8 = Sketch_5.setLength(SketchLine_43.result(), 2.7) +SketchConstraintLength_8.setName("SketchConstraintLength_9") +SketchConstraintLength_9 = Sketch_5.setLength(SketchLine_44.result(), 8) +SketchConstraintLength_9.setName("SketchConstraintLength_10") +SketchConstraintEqual_4 = Sketch_5.setEqual(SketchLine_47.result(), SketchLine_53.result()) +SketchPoint_5 = Sketch_5.addPoint(153.5, -28.84999053274707) +SketchPoint_5.setName("SketchPoint_7") +SketchPoint_5.result().setName("SketchPoint_7") +SketchConstraintMiddle_1 = Sketch_5.setMiddlePoint(SketchPoint_5.coordinates(), SketchLine_42.result()) +SketchLine_55 = Sketch_5.addLine(153.5, -28.84999053274707, -153.5, -28.84999053274707) +SketchLine_55.setName("SketchLine_54") +SketchLine_55.result().setName("SketchLine_54") +SketchLine_55.setAuxiliary(True) +SketchConstraintCoincidence_66 = Sketch_5.setCoincident(SketchPoint_5.coordinates(), SketchLine_55.startPoint()) +SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_71") +SketchLine_56 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_1_1/Modfied_8")) +SketchLine_56.setName("SketchLine_55") +SketchLine_56.result().setName("SketchLine_55") +SketchConstraintCoincidence_67 = Sketch_5.setCoincident(SketchLine_55.endPoint(), SketchLine_56.result()) +SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_72") +SketchConstraintHorizontal_15 = Sketch_5.setHorizontal(SketchLine_55.result()) +SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_48.result(), SketchPoint_5.coordinates(), 8.199999999999999) +SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_51.result(), SketchPoint_5.coordinates(), 7.8) +SketchArc_3 = Sketch_5.addArc(152.3, -43.54999053274682, 150.8000000000001, -43.54998998548124, 152.2999838292651, -45.04999053274704, False) +SketchLine_57 = Sketch_5.addLine(150.8, -37.04999053274702, 150.8000000000001, -43.54998998548124) +SketchLine_57.setName("SketchLine_56") +SketchLine_57.result().setName("SketchLine_56") +SketchLine_57.setAuxiliary(True) +SketchConstraintCoincidence_68 = Sketch_5.setCoincident(SketchArc_3.startPoint(), SketchLine_57.endPoint()) +SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_73") +SketchConstraintCoincidence_69 = Sketch_5.setCoincident(SketchArc_3.endPoint(), SketchLine_41.startPoint()) +SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_74") +SketchConstraintTangent_5 = Sketch_5.setTangent(SketchArc_3.results()[1], SketchLine_57.result()) +SketchConstraintTangent_6 = Sketch_5.setTangent(SketchArc_3.results()[1], SketchLine_41.result()) +SketchConstraintCoincidence_70 = Sketch_5.setCoincident(SketchLine_47.startPoint(), SketchLine_57.startPoint()) +SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_75") +SketchConstraintCoincidence_71 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_41.endPoint()) +SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_76") +SketchConstraintCoincidence_72 = Sketch_5.setCoincident(SketchLine_57.endPoint(), SketchLine_47.result()) +SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_77") +SketchConstraintCoincidence_73 = Sketch_5.setCoincident(SketchLine_41.startPoint(), SketchLine_43.result()) +SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_78") +SketchArc_4 = Sketch_5.addArc(152.3, -19.54999053274696, 150.8000000000001, -19.54999029833178, 152.2999838762584, -21.04999053274691, False) +SketchLine_58 = Sketch_5.addLine(150.7999999999999, -13.04999053274714, 150.8000000000001, -19.54999029833178) +SketchLine_58.setName("SketchLine_59") +SketchLine_58.result().setName("SketchLine_59") +SketchLine_58.setAuxiliary(True) +SketchConstraintCoincidence_74 = Sketch_5.setCoincident(SketchArc_4.startPoint(), SketchLine_58.endPoint()) +SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_79") +SketchConstraintCoincidence_75 = Sketch_5.setCoincident(SketchArc_4.endPoint(), SketchLine_40.startPoint()) +SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_80") +SketchConstraintTangent_7 = Sketch_5.setTangent(SketchArc_4.results()[1], SketchLine_40.result()) +SketchConstraintTangent_8 = Sketch_5.setTangent(SketchArc_4.results()[1], SketchLine_58.result()) +SketchConstraintCoincidence_76 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_40.endPoint()) +SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_81") +SketchConstraintCoincidence_77 = Sketch_5.setCoincident(SketchLine_53.startPoint(), SketchLine_58.startPoint()) +SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_82") +SketchConstraintCoincidence_78 = Sketch_5.setCoincident(SketchLine_40.startPoint(), SketchLine_51.result()) +SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_83") +SketchConstraintCoincidence_79 = Sketch_5.setCoincident(SketchLine_58.endPoint(), SketchLine_53.result()) +SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_84") +SketchArc_5 = Sketch_5.addArc(152.2999999999999, -14.54999053274707, 152.2999838654776, -13.04999053274697, 150.8000000000001, -14.54997391609652, False) +SketchConstraintCoincidence_80 = Sketch_5.setCoincident(SketchArc_5.startPoint(), SketchLine_46.endPoint()) +SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_85") +SketchConstraintCoincidence_81 = Sketch_5.setCoincident(SketchArc_5.endPoint(), SketchLine_45.startPoint()) +SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_86") +SketchConstraintTangent_9 = Sketch_5.setTangent(SketchArc_5.results()[1], SketchLine_46.result()) +SketchConstraintTangent_10 = Sketch_5.setTangent(SketchArc_5.results()[1], SketchLine_45.result()) +SketchConstraintCoincidence_82 = Sketch_5.setCoincident(SketchLine_54.startPoint(), SketchLine_46.startPoint()) +SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_87") +SketchConstraintCoincidence_83 = Sketch_5.setCoincident(SketchLine_58.endPoint(), SketchLine_45.endPoint()) +SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_88") +SketchConstraintCoincidence_84 = Sketch_5.setCoincident(SketchLine_46.endPoint(), SketchLine_54.result()) +SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_89") +SketchConstraintCoincidence_85 = Sketch_5.setCoincident(SketchLine_45.startPoint(), SketchLine_58.result()) +SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_90") +SketchArc_6 = Sketch_5.addArc(152.3, -38.54999053274739, 152.2999989299055, -37.04999053274738, 150.8, -38.54997391988981, False) +SketchConstraintCoincidence_86 = Sketch_5.setCoincident(SketchArc_6.startPoint(), SketchLine_49.endPoint()) +SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_91") +SketchConstraintCoincidence_87 = Sketch_5.setCoincident(SketchArc_6.endPoint(), SketchLine_50.startPoint()) +SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_92") +SketchConstraintTangent_11 = Sketch_5.setTangent(SketchArc_6.results()[1], SketchLine_49.result()) +SketchConstraintTangent_12 = Sketch_5.setTangent(SketchArc_6.results()[1], SketchLine_50.result()) +SketchConstraintCoincidence_88 = Sketch_5.setCoincident(SketchLine_48.startPoint(), SketchLine_49.startPoint()) +SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_93") +SketchConstraintCoincidence_89 = Sketch_5.setCoincident(SketchLine_57.endPoint(), SketchLine_50.endPoint()) +SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_94") +SketchConstraintCoincidence_90 = Sketch_5.setCoincident(SketchLine_49.endPoint(), SketchLine_48.result()) +SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_95") +SketchConstraintCoincidence_91 = Sketch_5.setCoincident(SketchLine_50.startPoint(), SketchLine_57.result()) +SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_96") +SketchConstraintRadius_4 = Sketch_5.setRadius(SketchArc_3.results()[1], 1.5) +SketchConstraintEqual_5 = Sketch_5.setEqual(SketchArc_6.results()[1], SketchArc_3.results()[1]) +SketchConstraintEqual_6 = Sketch_5.setEqual(SketchArc_3.results()[1], SketchArc_4.results()[1]) +SketchConstraintEqual_7 = Sketch_5.setEqual(SketchArc_4.results()[1], SketchArc_5.results()[1]) +SketchLine_59 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OY")) +SketchLine_59.setName("SketchLine_64") +SketchLine_59.result().setName("SketchLine_64") +SketchConstraintMirror_3_objects = [SketchArc_3.results()[1], SketchArc_6.results()[1], SketchLine_49.result(), SketchLine_50.result(), SketchLine_44.result(), SketchLine_41.result(), SketchLine_43.result(), SketchLine_57.result(), SketchLine_48.result(), SketchLine_47.result()] +SketchConstraintMirror_3 = Sketch_5.addMirror(SketchLine_59.result(), SketchConstraintMirror_3_objects) +[SketchArc_7, SketchArc_8, SketchLine_60, SketchLine_61, SketchLine_62, SketchLine_63, SketchLine_64, SketchLine_65, SketchLine_66, SketchLine_67] = SketchConstraintMirror_3.mirrored() +SketchLine_67.setName("SketchLine_72") +SketchLine_67.result().setName("SketchLine_72") +SketchLine_66.setName("SketchLine_71") +SketchLine_66.result().setName("SketchLine_71") +SketchLine_65.setName("SketchLine_70") +SketchLine_65.result().setName("SketchLine_70") +SketchLine_64.setName("SketchLine_69") +SketchLine_64.result().setName("SketchLine_69") +SketchLine_63.setName("SketchLine_68") +SketchLine_63.result().setName("SketchLine_68") +SketchLine_62.setName("SketchLine_67") +SketchLine_62.result().setName("SketchLine_67") +SketchLine_61.setName("SketchLine_66") +SketchLine_61.result().setName("SketchLine_66") +SketchLine_60.setName("SketchLine_65") +SketchLine_60.result().setName("SketchLine_65") +SketchConstraintMirror_4_objects = [SketchArc_4.results()[1], SketchArc_5.results()[1], SketchLine_52.result(), SketchLine_45.result(), SketchLine_46.result(), SketchLine_40.result(), SketchLine_54.result(), SketchLine_58.result(), SketchLine_51.result(), SketchLine_53.result()] +SketchConstraintMirror_4 = Sketch_5.addMirror(SketchLine_59.result(), SketchConstraintMirror_4_objects) +[SketchArc_9, SketchArc_10, SketchLine_68, SketchLine_69, SketchLine_70, SketchLine_71, SketchLine_72, SketchLine_73, SketchLine_74, SketchLine_75] = SketchConstraintMirror_4.mirrored() +SketchLine_75.setName("SketchLine_80") +SketchLine_75.result().setName("SketchLine_80") +SketchLine_74.setName("SketchLine_79") +SketchLine_74.result().setName("SketchLine_79") +SketchLine_73.setName("SketchLine_78") +SketchLine_73.result().setName("SketchLine_78") +SketchLine_72.setName("SketchLine_77") +SketchLine_72.result().setName("SketchLine_77") +SketchLine_71.setName("SketchLine_76") +SketchLine_71.result().setName("SketchLine_76") +SketchLine_70.setName("SketchLine_75") +SketchLine_70.result().setName("SketchLine_75") +SketchLine_69.setName("SketchLine_74") +SketchLine_69.result().setName("SketchLine_74") +SketchLine_68.setName("SketchLine_73") +SketchLine_68.result().setName("SketchLine_73") +model.do() +Sketch_5.setName("Sketch_6") +Sketch_5.result().setName("Sketch_6") +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")]) +Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_1")) +SketchArc_11 = Sketch_6.addArc(44.88999999999999, -23.54999053274703, 43.88999999999999, -23.54999053274703, 44.88999999999999, -22.54999053274703, False) +SketchArc_12 = Sketch_6.addArc(44.88999999999999, -13.54999053274703, 44.88999999999999, -14.54999053274703, 43.88999999999999, -13.54999053274703, False) +SketchArc_13 = Sketch_6.addArc(5.89, -13.54999053274703, 6.89, -13.54999053274703, 5.89, -14.54999053274703, False) +SketchArc_13.setName("SketchArc_14") +SketchArc_13.result().setName("SketchArc_14") +SketchArc_13.results()[1].setName("SketchArc_14_2") +SketchLine_76 = Sketch_6.addLine(6.890000000000002, -23.54999053274703, 43.88999999999999, -23.54999053274703) +SketchLine_76.setName("SketchLine_81") +SketchLine_76.result().setName("SketchLine_81") +SketchConstraintCoincidence_92 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_76.endPoint()) +SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_98") +SketchLine_77 = Sketch_6.addLine(6.89, -13.54999053274703, 43.88999999999999, -13.54999053274703) +SketchLine_77.setName("SketchLine_82") +SketchLine_77.result().setName("SketchLine_82") +SketchConstraintCoincidence_93 = Sketch_6.setCoincident(SketchArc_13.startPoint(), SketchLine_77.startPoint()) +SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_99") +SketchLine_78 = Sketch_6.addLine(44.88999999999999, -22.54999053274703, 44.88999999999999, -14.54999053274703) +SketchLine_78.setName("SketchLine_83") +SketchLine_78.result().setName("SketchLine_83") +SketchConstraintCoincidence_94 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_78.endPoint()) +SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_100") +SketchLine_79 = Sketch_6.addLine(5.89, -22.54999053274703, 5.89, -14.54999053274703) +SketchLine_79.setName("SketchLine_84") +SketchLine_79.result().setName("SketchLine_84") +SketchConstraintCoincidence_95 = Sketch_6.setCoincident(SketchArc_13.endPoint(), SketchLine_79.endPoint()) +SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_101") +SketchConstraintHorizontal_16 = Sketch_6.setHorizontal(SketchLine_76.result()) +SketchConstraintHorizontal_17 = Sketch_6.setHorizontal(SketchLine_77.result()) +SketchConstraintVertical_13 = Sketch_6.setVertical(SketchLine_79.result()) +SketchConstraintVertical_14 = Sketch_6.setVertical(SketchLine_78.result()) +SketchConstraintCoincidence_96 = Sketch_6.setCoincident(SketchArc_11.endPoint(), SketchLine_78.startPoint()) +SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_102") +SketchConstraintCoincidence_97 = Sketch_6.setCoincident(SketchArc_12.endPoint(), SketchLine_77.endPoint()) +SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_104") +SketchConstraintCoincidence_98 = Sketch_6.setCoincident(SketchArc_11.center(), SketchLine_78.result()) +SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_105") +SketchConstraintCoincidence_99 = Sketch_6.setCoincident(SketchArc_11.center(), SketchLine_76.result()) +SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_106") +SketchConstraintRadius_5 = Sketch_6.setRadius(SketchArc_11.results()[1], 1) +SketchConstraintCoincidence_100 = Sketch_6.setCoincident(SketchArc_12.center(), SketchLine_78.result()) +SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_107") +SketchConstraintCoincidence_101 = Sketch_6.setCoincident(SketchArc_12.center(), SketchLine_77.result()) +SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_108") +SketchConstraintCoincidence_102 = Sketch_6.setCoincident(SketchArc_13.center(), SketchLine_77.result()) +SketchConstraintCoincidence_102.setName("SketchConstraintCoincidence_109") +SketchConstraintEqual_8 = Sketch_6.setEqual(SketchArc_11.results()[1], SketchArc_12.results()[1]) +SketchConstraintEqual_9 = Sketch_6.setEqual(SketchArc_13.results()[1], SketchArc_11.results()[1]) +SketchConstraintEqual_9.setName("SketchConstraintEqual_10") +SketchConstraintCoincidence_103 = Sketch_6.setCoincident(SketchArc_13.center(), SketchLine_79.result()) +SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_112") +SketchConstraintDistance_10 = Sketch_6.setDistance(SketchLine_76.result(), SketchArc_13.startPoint(), 10) +SketchConstraintDistance_11 = Sketch_6.setDistance(SketchLine_79.startPoint(), SketchLine_78.result(), 39) +SketchLine_80 = Sketch_6.addLine(model.selection("EDGE", "PartSet/OY")) +SketchLine_80.setName("SketchLine_85") +SketchLine_80.result().setName("SketchLine_85") +SketchConstraintDistance_12 = Sketch_6.setDistance(SketchLine_79.startPoint(), SketchLine_80.result(), 5.89) +SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/Edge-SketchLine_54")) +SketchLine_81.setName("SketchLine_86") +SketchLine_81.result().setName("SketchLine_86") +SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_76.endPoint(), SketchLine_81.result(), 5.3) +SketchArc_14 = Sketch_6.addArc(5.890000000000002, -23.54999053274703, 5.89, -22.54999053274703, 6.890000000000002, -23.54999053274703, False) +SketchArc_14.setName("SketchArc_15") +SketchArc_14.result().setName("SketchArc_15") +SketchArc_14.results()[1].setName("SketchArc_15_2") +SketchConstraintCoincidence_104 = Sketch_6.setCoincident(SketchLine_79.startPoint(), SketchArc_14.startPoint()) +SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_110") +SketchConstraintCoincidence_105 = Sketch_6.setCoincident(SketchArc_14.endPoint(), SketchLine_76.startPoint()) +SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_111") +SketchConstraintCoincidence_106 = Sketch_6.setCoincident(SketchArc_14.center(), SketchLine_76.result()) +SketchConstraintCoincidence_106.setName("SketchConstraintCoincidence_113") +SketchConstraintCoincidence_107 = Sketch_6.setCoincident(SketchArc_14.center(), SketchLine_79.result()) +SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_114") +SketchConstraintEqual_10 = Sketch_6.setEqual(SketchArc_11.results()[1], SketchArc_14.results()[1]) +SketchConstraintEqual_10.setName("SketchConstraintEqual_11") +SketchPoint_6 = Sketch_6.addPoint(0, -28.84999053274704) +SketchPoint_6.setName("SketchPoint_8") +SketchPoint_6.result().setName("SketchPoint_8") +SketchPoint_7 = Sketch_6.addPoint(50.77, -28.84999053274703) +SketchPoint_7.setName("SketchPoint_9") +SketchPoint_7.result().setName("SketchPoint_9") +SketchPoint_8 = Sketch_6.addPoint(101.54, -28.84999053274702) +SketchPoint_8.setName("SketchPoint_10") +SketchPoint_8.result().setName("SketchPoint_10") +SketchConstraintCoincidence_108 = Sketch_6.setCoincident(SketchLine_80.result(), SketchPoint_6.coordinates()) +SketchConstraintCoincidence_108.setName("SketchConstraintCoincidence_115") +SketchConstraintCoincidence_109 = Sketch_6.setCoincident(SketchLine_81.result(), SketchPoint_6.coordinates()) +SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_116") +SketchConstraintCoincidence_110 = Sketch_6.setCoincident(SketchPoint_7.coordinates(), SketchLine_81.result()) +SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_117") +SketchConstraintCoincidence_111 = Sketch_6.setCoincident(SketchPoint_8.coordinates(), SketchLine_81.result()) +SketchConstraintCoincidence_111.setName("SketchConstraintCoincidence_118") +SketchConstraintDistance_14 = Sketch_6.setDistance(SketchPoint_7.coordinates(), SketchLine_80.result(), "56.66-5.89") +SketchConstraintDistance_15 = Sketch_6.setDistance(SketchLine_80.result(), SketchPoint_8.coordinates(), "107.43-5.89") +SketchMultiTranslation_1_objects = [SketchArc_13.results()[1], SketchArc_14.results()[1], SketchArc_12.results()[1], SketchArc_11.results()[1], SketchLine_78.result(), SketchLine_76.result(), SketchLine_77.result(), SketchLine_79.result()] +SketchMultiTranslation_1 = Sketch_6.addTranslation(SketchMultiTranslation_1_objects, SketchPoint_6.coordinates(), SketchPoint_7.coordinates(), 2) +[SketchArc_15, SketchArc_16, SketchArc_17, SketchArc_18, SketchLine_82, SketchLine_83, SketchLine_84, SketchLine_85] = SketchMultiTranslation_1.translated() +SketchLine_85.setName("SketchLine_90") +SketchLine_85.result().setName("SketchLine_90") +SketchLine_84.setName("SketchLine_89") +SketchLine_84.result().setName("SketchLine_89") +SketchLine_83.setName("SketchLine_88") +SketchLine_83.result().setName("SketchLine_88") +SketchLine_82.setName("SketchLine_87") +SketchLine_82.result().setName("SketchLine_87") +SketchArc_18.setName("SketchArc_19") +SketchArc_18.result().setName("SketchArc_19") +SketchArc_18.results()[1].setName("SketchArc_19_2") +SketchArc_17.setName("SketchArc_18") +SketchArc_17.result().setName("SketchArc_18") +SketchArc_17.results()[1].setName("SketchArc_18_2") +SketchArc_16.setName("SketchArc_17") +SketchArc_16.result().setName("SketchArc_17") +SketchArc_16.results()[1].setName("SketchArc_17_2") +SketchArc_15.setName("SketchArc_16") +SketchArc_15.result().setName("SketchArc_16") +SketchArc_15.results()[1].setName("SketchArc_16_2") +SketchMultiTranslation_2_objects = [SketchArc_12.results()[1], SketchArc_13.results()[1], SketchArc_11.results()[1], SketchArc_14.results()[1], SketchLine_79.result(), SketchLine_78.result(), SketchLine_77.result(), SketchLine_76.result()] +SketchMultiTranslation_2 = Sketch_6.addTranslation(SketchMultiTranslation_2_objects, SketchPoint_6.coordinates(), SketchPoint_8.coordinates(), 2) +[SketchArc_19, SketchArc_20, SketchArc_21, SketchArc_22, SketchLine_86, SketchLine_87, SketchLine_88, SketchLine_89] = SketchMultiTranslation_2.translated() +SketchLine_89.setName("SketchLine_94") +SketchLine_89.result().setName("SketchLine_94") +SketchLine_88.setName("SketchLine_93") +SketchLine_88.result().setName("SketchLine_93") +SketchLine_87.setName("SketchLine_92") +SketchLine_87.result().setName("SketchLine_92") +SketchLine_86.setName("SketchLine_91") +SketchLine_86.result().setName("SketchLine_91") +SketchArc_22.setName("SketchArc_23") +SketchArc_22.result().setName("SketchArc_23") +SketchArc_22.results()[1].setName("SketchArc_23_2") +SketchArc_21.setName("SketchArc_22") +SketchArc_21.result().setName("SketchArc_22") +SketchArc_21.results()[1].setName("SketchArc_22_2") +SketchArc_20.setName("SketchArc_21") +SketchArc_20.result().setName("SketchArc_21") +SketchArc_20.results()[1].setName("SketchArc_21_2") +SketchArc_19.setName("SketchArc_20") +SketchArc_19.result().setName("SketchArc_20") +SketchArc_19.results()[1].setName("SketchArc_20_2") +SketchConstraintMirror_5_objects = [SketchArc_18.results()[1], SketchArc_17.results()[1], SketchArc_16.results()[1], SketchArc_15.results()[1], SketchArc_22.results()[1], SketchArc_20.results()[1], SketchArc_11.results()[1], SketchArc_12.results()[1], SketchArc_21.results()[1], SketchArc_19.results()[1], SketchArc_14.results()[1], SketchArc_13.results()[1], SketchLine_77.result(), SketchLine_78.result(), SketchLine_79.result(), SketchLine_85.result(), SketchLine_87.result(), SketchLine_82.result(), SketchLine_84.result(), SketchLine_86.result(), SketchLine_83.result(), SketchLine_88.result(), SketchLine_76.result(), SketchLine_89.result()] +SketchConstraintMirror_5 = Sketch_6.addMirror(SketchLine_80.result(), SketchConstraintMirror_5_objects) +[SketchArc_23, SketchArc_24, SketchArc_25, SketchArc_26, SketchArc_27, SketchArc_28, SketchArc_29, SketchArc_30, SketchArc_31, SketchArc_32, SketchArc_33, SketchArc_34, SketchLine_90, SketchLine_91, SketchLine_92, SketchLine_93, SketchLine_94, SketchLine_95, SketchLine_96, SketchLine_97, SketchLine_98, SketchLine_99, SketchLine_100, SketchLine_101] = SketchConstraintMirror_5.mirrored() +SketchLine_101.setName("SketchLine_106") +SketchLine_101.result().setName("SketchLine_106") +SketchLine_100.setName("SketchLine_105") +SketchLine_100.result().setName("SketchLine_105") +SketchLine_99.setName("SketchLine_104") +SketchLine_99.result().setName("SketchLine_104") +SketchLine_98.setName("SketchLine_103") +SketchLine_98.result().setName("SketchLine_103") +SketchLine_97.setName("SketchLine_102") +SketchLine_97.result().setName("SketchLine_102") +SketchLine_96.setName("SketchLine_101") +SketchLine_96.result().setName("SketchLine_101") +SketchLine_95.setName("SketchLine_100") +SketchLine_95.result().setName("SketchLine_100") +SketchLine_94.setName("SketchLine_99") +SketchLine_94.result().setName("SketchLine_99") +SketchLine_93.setName("SketchLine_98") +SketchLine_93.result().setName("SketchLine_98") +SketchLine_92.setName("SketchLine_97") +SketchLine_92.result().setName("SketchLine_97") +SketchLine_91.setName("SketchLine_96") +SketchLine_91.result().setName("SketchLine_96") +SketchLine_90.setName("SketchLine_95") +SketchLine_90.result().setName("SketchLine_95") +SketchArc_34.setName("SketchArc_35") +SketchArc_34.result().setName("SketchArc_35") +SketchArc_34.results()[1].setName("SketchArc_35_2") +SketchArc_33.setName("SketchArc_34") +SketchArc_33.result().setName("SketchArc_34") +SketchArc_33.results()[1].setName("SketchArc_34_2") +SketchArc_32.setName("SketchArc_33") +SketchArc_32.result().setName("SketchArc_33") +SketchArc_32.results()[1].setName("SketchArc_33_2") +SketchArc_31.setName("SketchArc_32") +SketchArc_31.result().setName("SketchArc_32") +SketchArc_31.results()[1].setName("SketchArc_32_2") +SketchArc_30.setName("SketchArc_31") +SketchArc_30.result().setName("SketchArc_31") +SketchArc_30.results()[1].setName("SketchArc_31_2") +SketchArc_29.setName("SketchArc_30") +SketchArc_29.result().setName("SketchArc_30") +SketchArc_29.results()[1].setName("SketchArc_30_2") +SketchArc_28.setName("SketchArc_29") +SketchArc_28.result().setName("SketchArc_29") +SketchArc_28.results()[1].setName("SketchArc_29_2") +SketchArc_27.setName("SketchArc_28") +SketchArc_27.result().setName("SketchArc_28") +SketchArc_27.results()[1].setName("SketchArc_28_2") +SketchArc_26.setName("SketchArc_27") +SketchArc_26.result().setName("SketchArc_27") +SketchArc_26.results()[1].setName("SketchArc_27_2") +SketchArc_25.setName("SketchArc_26") +SketchArc_25.result().setName("SketchArc_26") +SketchArc_25.results()[1].setName("SketchArc_26_2") +SketchArc_24.setName("SketchArc_25") +SketchArc_24.result().setName("SketchArc_25") +SketchArc_24.results()[1].setName("SketchArc_25_2") +SketchArc_23.setName("SketchArc_24") +SketchArc_23.result().setName("SketchArc_24") +SketchArc_23.results()[1].setName("SketchArc_24_2") +SketchPoint_9 = Sketch_6.addPoint(1.460819920296274e-014, -49.84999053274704) +SketchPoint_9.setName("SketchPoint_11") +SketchPoint_9.result().setName("SketchPoint_11") +SketchConstraintCoincidence_112 = Sketch_6.setCoincident(SketchPoint_9.coordinates(), SketchLine_80.result()) +SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_119") +SketchConstraintDistance_16 = Sketch_6.setDistance(SketchPoint_9.coordinates(), SketchLine_81.result(), "10+5.3+5.7") +SketchMultiTranslation_3_objects = [SketchArc_13.results()[1], SketchArc_34.results()[1], SketchArc_14.results()[1], SketchArc_33.results()[1], SketchArc_12.results()[1], SketchArc_11.results()[1], SketchArc_30.results()[1], SketchArc_29.results()[1], SketchArc_15.results()[1], SketchArc_16.results()[1], SketchArc_26.results()[1], SketchArc_25.results()[1], SketchArc_17.results()[1], SketchArc_18.results()[1], SketchArc_24.results()[1], SketchArc_23.results()[1], SketchArc_20.results()[1], SketchArc_22.results()[1], SketchArc_28.results()[1], SketchArc_27.results()[1], SketchArc_19.results()[1], SketchArc_21.results()[1], SketchArc_32.results()[1], SketchArc_31.results()[1], SketchLine_82.result(), SketchLine_77.result(), SketchLine_97.result(), SketchLine_94.result(), SketchLine_101.result(), SketchLine_99.result(), SketchLine_83.result(), SketchLine_88.result(), SketchLine_89.result(), SketchLine_86.result(), SketchLine_85.result(), SketchLine_100.result(), SketchLine_79.result(), SketchLine_92.result(), SketchLine_87.result(), SketchLine_91.result(), SketchLine_84.result(), SketchLine_96.result(), SketchLine_95.result(), SketchLine_93.result(), SketchLine_78.result(), SketchLine_98.result(), SketchLine_76.result(), SketchLine_90.result()] +SketchMultiTranslation_3 = Sketch_6.addTranslation(SketchMultiTranslation_3_objects, SketchPoint_6.coordinates(), SketchPoint_9.coordinates(), 2) +[SketchArc_35, SketchArc_34, SketchArc_36, SketchArc_37, SketchArc_33, SketchArc_38, SketchArc_39, SketchArc_40, SketchArc_30, SketchArc_41, SketchArc_29, SketchArc_42, SketchArc_15, SketchArc_43, SketchArc_16, SketchArc_44, SketchArc_26, SketchArc_45, SketchArc_25, SketchArc_46, SketchArc_17, SketchArc_47, SketchArc_18, SketchArc_48, SketchArc_24, SketchArc_49, SketchArc_23, SketchArc_50, SketchArc_20, SketchArc_51, SketchArc_22, SketchArc_52, SketchArc_28, SketchArc_53, SketchArc_27, SketchArc_54, SketchArc_19, SketchArc_55, SketchArc_21, SketchArc_56, SketchArc_32, SketchArc_57, SketchArc_31, SketchArc_58, SketchLine_82, SketchLine_102, SketchLine_103, SketchLine_97, SketchLine_104, SketchLine_94, SketchLine_105, SketchLine_101, SketchLine_106, SketchLine_99, SketchLine_107, SketchLine_83, SketchLine_108, SketchLine_88, SketchLine_109, SketchLine_89, SketchLine_110, SketchLine_86, SketchLine_111, SketchLine_85, SketchLine_112, SketchLine_100, SketchLine_113, SketchLine_114, SketchLine_92, SketchLine_115, SketchLine_87, SketchLine_116, SketchLine_91, SketchLine_117, SketchLine_84, SketchLine_118, SketchLine_96, SketchLine_119, SketchLine_95, SketchLine_120, SketchLine_93, SketchLine_121, SketchLine_122, SketchLine_98, SketchLine_123, SketchLine_124, SketchLine_90, SketchLine_125] = SketchMultiTranslation_3.translated() +SketchLine_125.setName("SketchLine_130") +SketchLine_125.result().setName("SketchLine_130") +SketchLine_124.setName("SketchLine_129") +SketchLine_124.result().setName("SketchLine_129") +SketchLine_123.setName("SketchLine_128") +SketchLine_123.result().setName("SketchLine_128") +SketchLine_122.setName("SketchLine_127") +SketchLine_122.result().setName("SketchLine_127") +SketchLine_121.setName("SketchLine_126") +SketchLine_121.result().setName("SketchLine_126") +SketchLine_120.setName("SketchLine_125") +SketchLine_120.result().setName("SketchLine_125") +SketchLine_119.setName("SketchLine_124") +SketchLine_119.result().setName("SketchLine_124") +SketchLine_118.setName("SketchLine_123") +SketchLine_118.result().setName("SketchLine_123") +SketchLine_117.setName("SketchLine_122") +SketchLine_117.result().setName("SketchLine_122") +SketchLine_116.setName("SketchLine_121") +SketchLine_116.result().setName("SketchLine_121") +SketchLine_115.setName("SketchLine_120") +SketchLine_115.result().setName("SketchLine_120") +SketchLine_114.setName("SketchLine_119") +SketchLine_114.result().setName("SketchLine_119") +SketchLine_113.setName("SketchLine_118") +SketchLine_113.result().setName("SketchLine_118") +SketchLine_112.setName("SketchLine_117") +SketchLine_112.result().setName("SketchLine_117") +SketchLine_111.setName("SketchLine_116") +SketchLine_111.result().setName("SketchLine_116") +SketchLine_110.setName("SketchLine_115") +SketchLine_110.result().setName("SketchLine_115") +SketchLine_109.setName("SketchLine_114") +SketchLine_109.result().setName("SketchLine_114") +SketchLine_108.setName("SketchLine_113") +SketchLine_108.result().setName("SketchLine_113") +SketchLine_107.setName("SketchLine_112") +SketchLine_107.result().setName("SketchLine_112") +SketchLine_106.setName("SketchLine_111") +SketchLine_106.result().setName("SketchLine_111") +SketchLine_105.setName("SketchLine_110") +SketchLine_105.result().setName("SketchLine_110") +SketchLine_104.setName("SketchLine_109") +SketchLine_104.result().setName("SketchLine_109") +SketchLine_103.setName("SketchLine_108") +SketchLine_103.result().setName("SketchLine_108") +SketchLine_102.setName("SketchLine_107") +SketchLine_102.result().setName("SketchLine_107") +SketchArc_58.setName("SketchArc_59") +SketchArc_58.result().setName("SketchArc_59") +SketchArc_58.results()[1].setName("SketchArc_59_2") +SketchArc_57.setName("SketchArc_58") +SketchArc_57.result().setName("SketchArc_58") +SketchArc_57.results()[1].setName("SketchArc_58_2") +SketchArc_56.setName("SketchArc_57") +SketchArc_56.result().setName("SketchArc_57") +SketchArc_56.results()[1].setName("SketchArc_57_2") +SketchArc_55.setName("SketchArc_56") +SketchArc_55.result().setName("SketchArc_56") +SketchArc_55.results()[1].setName("SketchArc_56_2") +SketchArc_54.setName("SketchArc_55") +SketchArc_54.result().setName("SketchArc_55") +SketchArc_54.results()[1].setName("SketchArc_55_2") +SketchArc_53.setName("SketchArc_54") +SketchArc_53.result().setName("SketchArc_54") +SketchArc_53.results()[1].setName("SketchArc_54_2") +SketchArc_52.setName("SketchArc_53") +SketchArc_52.result().setName("SketchArc_53") +SketchArc_52.results()[1].setName("SketchArc_53_2") +SketchArc_51.setName("SketchArc_52") +SketchArc_51.result().setName("SketchArc_52") +SketchArc_51.results()[1].setName("SketchArc_52_2") +SketchArc_50.setName("SketchArc_51") +SketchArc_50.result().setName("SketchArc_51") +SketchArc_50.results()[1].setName("SketchArc_51_2") +SketchArc_49.setName("SketchArc_50") +SketchArc_49.result().setName("SketchArc_50") +SketchArc_49.results()[1].setName("SketchArc_50_2") +SketchArc_48.setName("SketchArc_49") +SketchArc_48.result().setName("SketchArc_49") +SketchArc_48.results()[1].setName("SketchArc_49_2") +SketchArc_47.setName("SketchArc_48") +SketchArc_47.result().setName("SketchArc_48") +SketchArc_47.results()[1].setName("SketchArc_48_2") +SketchArc_46.setName("SketchArc_47") +SketchArc_46.result().setName("SketchArc_47") +SketchArc_46.results()[1].setName("SketchArc_47_2") +SketchArc_45.setName("SketchArc_46") +SketchArc_45.result().setName("SketchArc_46") +SketchArc_45.results()[1].setName("SketchArc_46_2") +SketchArc_44.setName("SketchArc_45") +SketchArc_44.result().setName("SketchArc_45") +SketchArc_44.results()[1].setName("SketchArc_45_2") +SketchArc_43.setName("SketchArc_44") +SketchArc_43.result().setName("SketchArc_44") +SketchArc_43.results()[1].setName("SketchArc_44_2") +SketchArc_42.setName("SketchArc_43") +SketchArc_42.result().setName("SketchArc_43") +SketchArc_42.results()[1].setName("SketchArc_43_2") +SketchArc_41.setName("SketchArc_42") +SketchArc_41.result().setName("SketchArc_42") +SketchArc_41.results()[1].setName("SketchArc_42_2") +SketchArc_40.setName("SketchArc_41") +SketchArc_40.result().setName("SketchArc_41") +SketchArc_40.results()[1].setName("SketchArc_41_2") +SketchArc_39.setName("SketchArc_40") +SketchArc_39.result().setName("SketchArc_40") +SketchArc_39.results()[1].setName("SketchArc_40_2") +SketchArc_38.setName("SketchArc_39") +SketchArc_38.result().setName("SketchArc_39") +SketchArc_38.results()[1].setName("SketchArc_39_2") +SketchArc_37.setName("SketchArc_38") +SketchArc_37.result().setName("SketchArc_38") +SketchArc_37.results()[1].setName("SketchArc_38_2") +SketchArc_36.setName("SketchArc_37") +SketchArc_36.result().setName("SketchArc_37") +SketchArc_36.results()[1].setName("SketchArc_37_2") +SketchArc_35.setName("SketchArc_36") +SketchArc_35.result().setName("SketchArc_36") +SketchArc_35.results()[1].setName("SketchArc_36_2") +model.do() +Sketch_6.setName("Sketch_7") +Sketch_6.result().setName("Sketch_7") +ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("FACE", "Sketch_7/Face-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("FACE", "Sketch_7/Face-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("FACE", "Sketch_7/Face-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")]) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1")) +SketchLine_126 = Sketch_7.addLine(-153.5, -37.049990532747, -152.3000099350335, -37.0499905327475) +SketchLine_126.setName("SketchLine_135") +SketchLine_126.result().setName("SketchLine_135") +SketchLine_127 = Sketch_7.addLine(-150.7999999999999, -38.54999290880026, -150.8, -43.54999111476925) +SketchLine_127.setName("SketchLine_138") +SketchLine_127.result().setName("SketchLine_138") +SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_67s-SketchLine_68e-SketchLine_69e")) +SketchPoint_10.setName("SketchPoint_12") +SketchPoint_10.result().setName("SketchPoint_12") +SketchLine_128 = Sketch_7.addLine(-150.8, -45.049990532747, -153.5, -45.04999053274734) +SketchLine_128.setName("SketchLine_131") +SketchLine_128.result().setName("SketchLine_131") +SketchLine_128.setAuxiliary(True) +SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchPoint_10.result()) +SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_120") +SketchLine_129 = Sketch_7.addLine(-153.5, -45.04999053274734, -153.5, -37.049990532747) +SketchLine_129.setName("SketchLine_132") +SketchLine_129.result().setName("SketchLine_132") +SketchLine_130 = Sketch_7.addLine(-152.2999985784279, -45.04999053274759, -153.5, -45.04999053274734) +SketchLine_130.setName("SketchLine_137") +SketchLine_130.result().setName("SketchLine_137") +SketchLine_131 = Sketch_7.addLine(-150.8, -37.04999053274745, -150.8, -45.049990532747) +SketchLine_131.setName("SketchLine_134") +SketchLine_131.result().setName("SketchLine_134") +SketchLine_131.setAuxiliary(True) +SketchConstraintCoincidence_114 = Sketch_7.setCoincident(SketchLine_131.endPoint(), SketchLine_128.startPoint()) +SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_121") +SketchConstraintCoincidence_115 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchLine_129.startPoint()) +SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_122") +SketchLine_132 = Sketch_7.addLine(-153.5, -37.049990532747, -150.8, -37.04999053274745) +SketchLine_132.setName("SketchLine_133") +SketchLine_132.result().setName("SketchLine_133") +SketchLine_132.setAuxiliary(True) +SketchConstraintCoincidence_116 = Sketch_7.setCoincident(SketchLine_129.endPoint(), SketchLine_132.startPoint()) +SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_123") +SketchConstraintCoincidence_117 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchLine_131.startPoint()) +SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_124") +SketchConstraintHorizontal_18 = Sketch_7.setHorizontal(SketchLine_128.result()) +SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_129.result()) +SketchConstraintHorizontal_19 = Sketch_7.setHorizontal(SketchLine_132.result()) +SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_131.result()) +SketchPoint_11 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_70s-SketchLine_72s-SketchLine_71e")) +SketchPoint_11.setName("SketchPoint_13") +SketchPoint_11.result().setName("SketchPoint_13") +SketchConstraintCoincidence_118 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchPoint_11.result()) +SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_125") +SketchArc_59 = Sketch_7.addArc(-152.3, -38.54999053274712, -150.7999999999999, -38.54999290880026, -152.3000099350335, -37.0499905327475, False) +SketchArc_59.setName("SketchArc_60") +SketchArc_59.result().setName("SketchArc_60") +SketchArc_59.results()[1].setName("SketchArc_60_2") +SketchLine_133 = Sketch_7.addLine(-150.7999999999999, -38.54999290880026, -150.8, -45.049990532747) +SketchLine_133.setName("SketchLine_136") +SketchLine_133.result().setName("SketchLine_136") +SketchLine_133.setAuxiliary(True) +SketchConstraintCoincidence_119 = Sketch_7.setCoincident(SketchArc_59.startPoint(), SketchLine_133.startPoint()) +SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_126") +SketchConstraintCoincidence_120 = Sketch_7.setCoincident(SketchArc_59.endPoint(), SketchLine_126.endPoint()) +SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_127") +SketchConstraintTangent_13 = Sketch_7.setTangent(SketchArc_59.results()[1], SketchLine_126.result()) +SketchConstraintTangent_14 = Sketch_7.setTangent(SketchArc_59.results()[1], SketchLine_133.result()) +SketchConstraintCoincidence_121 = Sketch_7.setCoincident(SketchLine_132.startPoint(), SketchLine_126.startPoint()) +SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_128") +SketchConstraintCoincidence_122 = Sketch_7.setCoincident(SketchLine_131.endPoint(), SketchLine_133.endPoint()) +SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_129") +SketchConstraintCoincidence_123 = Sketch_7.setCoincident(SketchLine_126.endPoint(), SketchLine_132.result()) +SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_130") +SketchConstraintCoincidence_124 = Sketch_7.setCoincident(SketchLine_133.startPoint(), SketchLine_131.result()) +SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_131") +SketchArc_60 = Sketch_7.addArc(-152.3, -43.54999053274783, -152.2999985784279, -45.04999053274759, -150.8, -43.54999111476925, False) +SketchArc_60.setName("SketchArc_61") +SketchArc_60.result().setName("SketchArc_61") +SketchArc_60.results()[1].setName("SketchArc_61_2") +SketchConstraintCoincidence_125 = Sketch_7.setCoincident(SketchArc_60.startPoint(), SketchLine_130.startPoint()) +SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_132") +SketchConstraintCoincidence_126 = Sketch_7.setCoincident(SketchArc_60.endPoint(), SketchLine_127.endPoint()) +SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_133") +SketchConstraintTangent_15 = Sketch_7.setTangent(SketchArc_60.results()[1], SketchLine_130.result()) +SketchConstraintTangent_16 = Sketch_7.setTangent(SketchArc_60.results()[1], SketchLine_127.result()) +SketchConstraintCoincidence_127 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchLine_130.endPoint()) +SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_134") +SketchConstraintCoincidence_128 = Sketch_7.setCoincident(SketchLine_133.startPoint(), SketchLine_127.startPoint()) +SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_135") +SketchConstraintCoincidence_129 = Sketch_7.setCoincident(SketchLine_130.startPoint(), SketchLine_128.result()) +SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_136") +SketchConstraintCoincidence_130 = Sketch_7.setCoincident(SketchLine_127.endPoint(), SketchLine_133.result()) +SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_137") +SketchConstraintRadius_6 = Sketch_7.setRadius(SketchArc_60.results()[1], 1.5) +SketchConstraintRadius_7 = Sketch_7.setRadius(SketchArc_59.results()[1], 1.5) +model.do() +Sketch_7.setName("Sketch_8") +Sketch_7.result().setName("Sketch_8") +ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_5_1")]) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_2")) +SketchLine_134 = Sketch_8.addLine(0.8499999999999983, 50.75, -0.8500000000000015, 50.75) +SketchLine_134.setName("SketchLine_139") +SketchLine_134.result().setName("SketchLine_139") +SketchLine_135 = Sketch_8.addLine(-0.8500000000000015, 47.45, 0.8499999999999983, 47.45) +SketchLine_135.setName("SketchLine_141") +SketchLine_135.result().setName("SketchLine_141") +SketchConstraintHorizontal_20 = Sketch_8.setHorizontal(SketchLine_134.result()) +SketchConstraintHorizontal_21 = Sketch_8.setHorizontal(SketchLine_135.result()) +SketchArc_61 = Sketch_8.addArc(0.8499999999999999, 49.1, 0.8499999999999983, 47.45, 0.8499999999999983, 50.75, False) +SketchArc_61.setName("SketchArc_63") +SketchArc_61.result().setName("SketchArc_63") +SketchArc_61.results()[1].setName("SketchArc_63_2") +SketchConstraintCoincidence_131 = Sketch_8.setCoincident(SketchLine_134.startPoint(), SketchArc_61.endPoint()) +SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_146") +SketchConstraintCoincidence_132 = Sketch_8.setCoincident(SketchArc_61.startPoint(), SketchLine_135.endPoint()) +SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_148") +SketchConstraintDistance_17 = Sketch_8.setDistance(SketchLine_134.result(), SketchLine_135.endPoint(), 3.3) +SketchLine_136 = Sketch_8.addLine(0.8499999999999983, 50.75, 0.8499999999999983, 47.45) +SketchLine_136.setName("SketchLine_140") +SketchLine_136.result().setName("SketchLine_140") +SketchLine_136.setAuxiliary(True) +SketchConstraintCoincidence_133 = Sketch_8.setCoincident(SketchLine_134.startPoint(), SketchLine_136.startPoint()) +SketchConstraintCoincidence_133.setName("SketchConstraintCoincidence_138") +SketchConstraintCoincidence_134 = Sketch_8.setCoincident(SketchArc_61.endPoint(), SketchLine_136.startPoint()) +SketchConstraintCoincidence_134.setName("SketchConstraintCoincidence_139") +SketchConstraintCoincidence_135 = Sketch_8.setCoincident(SketchLine_135.endPoint(), SketchLine_136.endPoint()) +SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_140") +SketchConstraintCoincidence_136 = Sketch_8.setCoincident(SketchArc_61.startPoint(), SketchLine_136.endPoint()) +SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_141") +SketchLine_137 = Sketch_8.addLine(-0.8500000000000015, 50.75, -0.8500000000000015, 47.45) +SketchLine_137.setName("SketchLine_142") +SketchLine_137.result().setName("SketchLine_142") +SketchLine_137.setAuxiliary(True) +SketchConstraintCoincidence_137 = Sketch_8.setCoincident(SketchLine_134.endPoint(), SketchLine_137.startPoint()) +SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_143") +SketchConstraintCoincidence_138 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchLine_137.endPoint()) +SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_147") +SketchConstraintMiddle_2 = Sketch_8.setMiddlePoint(SketchLine_136.result(), SketchArc_61.center()) +SketchConstraintLength_10 = Sketch_8.setLength(SketchLine_134.result(), 1.7) +SketchConstraintLength_10.setName("SketchConstraintLength_11") +SketchConstraintVertical_17 = Sketch_8.setVertical(SketchLine_137.result()) +SketchConstraintVertical_18 = Sketch_8.setVertical(SketchLine_136.result()) +SketchLine_138 = Sketch_8.addLine(0.8499999999999983, 50.75, -0.8500000000000015, 47.45) +SketchLine_138.setName("SketchLine_143") +SketchLine_138.result().setName("SketchLine_143") +SketchLine_138.setAuxiliary(True) +SketchConstraintCoincidence_139 = Sketch_8.setCoincident(SketchLine_134.startPoint(), SketchLine_138.startPoint()) +SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_150") +SketchConstraintCoincidence_140 = Sketch_8.setCoincident(SketchArc_61.endPoint(), SketchLine_138.startPoint()) +SketchConstraintCoincidence_140.setName("SketchConstraintCoincidence_151") +SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchLine_136.startPoint(), SketchLine_138.startPoint()) +SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_152") +SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchLine_138.endPoint()) +SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_153") +SketchConstraintCoincidence_143 = Sketch_8.setCoincident(SketchLine_137.endPoint(), SketchLine_138.endPoint()) +SketchConstraintCoincidence_143.setName("SketchConstraintCoincidence_155") +SketchPoint_12 = Sketch_8.addPoint(0, 49.1) +SketchPoint_12.setName("SketchPoint_14") +SketchPoint_12.result().setName("SketchPoint_14") +SketchConstraintCoincidence_144 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_138.result()) +SketchConstraintCoincidence_144.setName("SketchConstraintCoincidence_156") +SketchConstraintMiddle_3 = Sketch_8.setMiddlePoint(SketchLine_138.result(), SketchPoint_12.coordinates()) +SketchConstraintMiddle_3.setName("SketchConstraintMiddle_4") +SketchProjection_2 = Sketch_8.addProjection(model.selection("EDGE", "PartSet/OY")) +SketchLine_139 = SketchProjection_2.createdFeature() +SketchLine_139.setName("SketchLine_144") +SketchLine_139.result().setName("SketchLine_144") +SketchConstraintCoincidence_145 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_139.result()) +SketchConstraintCoincidence_145.setName("SketchConstraintCoincidence_157") +SketchArc_62 = Sketch_8.addArc(-0.8500000000000004, 49.1, -0.8500000000000015, 50.75, -0.8500000000000015, 47.45, False) +SketchConstraintCoincidence_146 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchArc_62.endPoint()) +SketchConstraintCoincidence_146.setName("SketchConstraintCoincidence_149") +SketchConstraintCoincidence_147 = Sketch_8.setCoincident(SketchLine_137.endPoint(), SketchArc_62.endPoint()) +SketchConstraintCoincidence_147.setName("SketchConstraintCoincidence_154") +SketchConstraintCoincidence_148 = Sketch_8.setCoincident(SketchLine_138.endPoint(), SketchArc_62.endPoint()) +SketchConstraintCoincidence_148.setName("SketchConstraintCoincidence_158") +SketchConstraintCoincidence_149 = Sketch_8.setCoincident(SketchArc_62.startPoint(), SketchLine_134.endPoint()) +SketchConstraintCoincidence_149.setName("SketchConstraintCoincidence_159") +SketchConstraintMiddle_4 = Sketch_8.setMiddlePoint(SketchLine_137.result(), SketchArc_62.center()) +SketchConstraintMiddle_4.setName("SketchConstraintMiddle_5") +SketchLine_140 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_6_1/Modfied_2")) +SketchLine_140.setName("SketchLine_145") +SketchLine_140.result().setName("SketchLine_145") +SketchConstraintDistance_18 = Sketch_8.setDistance(SketchLine_140.result(), SketchPoint_12.coordinates(), 6) +SketchLine_141 = Sketch_8.addLine(0, 49.1, 107.43, 49.1) +SketchLine_141.setName("SketchLine_146") +SketchLine_141.result().setName("SketchLine_146") +SketchLine_141.setAuxiliary(True) +SketchConstraintCoincidence_150 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_141.startPoint()) +SketchConstraintCoincidence_150.setName("SketchConstraintCoincidence_160") +SketchConstraintHorizontal_22 = Sketch_8.setHorizontal(SketchLine_141.result()) +SketchConstraintLength_11 = Sketch_8.setLength(SketchLine_141.result(), 107.43) +SketchConstraintLength_11.setName("SketchConstraintLength_12") +SketchMultiTranslation_4_objects = [SketchLine_134.result(), SketchLine_135.result(), SketchArc_61.results()[1], SketchArc_62.results()[1]] +SketchMultiTranslation_4 = Sketch_8.addTranslation(SketchMultiTranslation_4_objects, SketchPoint_12.coordinates(), SketchLine_141.endPoint(), 2) +[SketchLine_142, SketchLine_143, SketchArc_63, SketchArc_64] = SketchMultiTranslation_4.translated() +SketchArc_64.setName("SketchArc_65") +SketchArc_64.result().setName("SketchArc_65") +SketchArc_64.results()[1].setName("SketchArc_65_2") +SketchArc_63.setName("SketchArc_64") +SketchArc_63.result().setName("SketchArc_64") +SketchArc_63.results()[1].setName("SketchArc_64_2") +SketchLine_143.setName("SketchLine_148") +SketchLine_143.result().setName("SketchLine_148") +SketchLine_142.setName("SketchLine_147") +SketchLine_142.result().setName("SketchLine_147") +SketchConstraintMirror_6_objects = [SketchArc_63.results()[1], SketchArc_64.results()[1], SketchLine_142.result(), SketchLine_143.result()] +SketchConstraintMirror_6 = Sketch_8.addMirror(SketchLine_139.result(), SketchConstraintMirror_6_objects) +[SketchArc_65, SketchArc_66, SketchLine_144, SketchLine_145] = SketchConstraintMirror_6.mirrored() +SketchLine_145.setName("SketchLine_150") +SketchLine_145.result().setName("SketchLine_150") +SketchLine_144.setName("SketchLine_149") +SketchLine_144.result().setName("SketchLine_149") +SketchArc_66.setName("SketchArc_67") +SketchArc_66.result().setName("SketchArc_67") +SketchArc_66.results()[1].setName("SketchArc_67_2") +SketchArc_65.setName("SketchArc_66") +SketchArc_65.result().setName("SketchArc_66") +SketchArc_65.results()[1].setName("SketchArc_66_2") +model.do() +Sketch_8.setName("Sketch_9") +Sketch_8.result().setName("Sketch_9") +ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_147f-SketchLine_148f-SketchArc_64_2f-SketchArc_65_2f"), model.selection("FACE", "Sketch_9/Face-SketchLine_139f-SketchLine_141f-SketchArc_63_2f-SketchArc_62_2f"), model.selection("FACE", "Sketch_9/Face-SketchArc_66_2f-SketchArc_67_2f-SketchLine_149r-SketchLine_150r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_6_1")]) +model.do() +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(ExtrusionCut_7, 1) +model.testNbSubResults(ExtrusionCut_7, [0]) +model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.SOLID, [1]) +model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.FACE, [156]) +model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.EDGE, [920]) +model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.VERTEX, [1840]) +model.testResultsVolumes(ExtrusionCut_7, [5345.689532925511230132542550564]) + +assert(model.checkPythonDump) -- 2.39.2