From 63ca6ddf9db6eb84cafa8901ed97cbe621095838 Mon Sep 17 00:00:00 2001 From: azv Date: Sun, 26 Nov 2017 17:00:48 +0300 Subject: [PATCH] Adjust names in test cases (part II) --- test.models/case24.py | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/test.models/case24.py b/test.models/case24.py index c13b9d608..569774775 100644 --- a/test.models/case24.py +++ b/test.models/case24.py @@ -129,14 +129,14 @@ SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_11.endPoint(), Sket model.do() ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13f-SketchLine_9f-SketchLine_10f-SketchLine_14f-SketchArc_2_2f")], model.selection(), 0, 25, [model.selection("SOLID", "ExtrusionFuse_1_1")]) ExtrusionFuse_2.result().setName("ExtrusionFuse_2_1") -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_5")) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_8")) SketchLine_15 = Sketch_3.addLine(0, -20, -17.00000002635728, -20) SketchLine_15.setName("SketchLine_19") SketchLine_15.result().setName("SketchLine_19") SketchLine_16 = Sketch_3.addLine(-20, 0, 0, 0) SketchLine_16.setName("SketchLine_15") SketchLine_16.result().setName("SketchLine_15") -SketchPoint_2 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_6&ExtrusionFuse_2_1/Modfied_8&ExtrusionFuse_2_1/Modfied_5&ExtrusionFuse_2_1/Modfied_2")) +SketchPoint_2 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_7&ExtrusionFuse_2_1/Modfied_6&ExtrusionFuse_2_1/Modfied_8&ExtrusionFuse_2_1/Modfied_9")) SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchPoint_2.result()) SketchLine_17 = Sketch_3.addLine(0, 0, 0, -20) SketchLine_17.setName("SketchLine_16") @@ -178,7 +178,7 @@ SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_21.startPoint(), Sk model.do() RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "Sketch_3/Edge-SketchLine_21"), 71, 0, [model.selection("SOLID", "ExtrusionFuse_2_1")]) RevolutionFuse_1.result().setName("RevolutionFuse_1_1") -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_6")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_7")) SketchLine_22 = Sketch_4.addLine(-3, -20, 17.00000452949485, -20) SketchLine_22.setName("SketchLine_26") SketchLine_22.result().setName("SketchLine_26") @@ -439,7 +439,7 @@ SketchLine_54.result().setName("SketchLine_55") SketchLine_54.setAuxiliary(True) SketchConstraintCoincidence_86 = Sketch_7.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint()) SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_96") -SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_12&RevolutionFuse_3_1/Modfied_15")) +SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_13&RevolutionFuse_3_1/Modfied_10")) SketchLine_55.setName("SketchLine_56") SketchLine_55.result().setName("SketchLine_56") SketchConstraintCoincidence_87 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result()) @@ -656,7 +656,7 @@ Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY")) SketchLine_77 = Sketch_10.addLine(64, 20, 89, 20) SketchLine_77.setName("SketchLine_76") SketchLine_77.result().setName("SketchLine_76") -SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_2_1/Modfied_8&RevolutionFuse_2_1/Modfied_6&RevolutionFuse_3_1/Modfied_10&RevolutionFuse_3_1/Modfied_21")) +SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_2_1/Modfied_11&RevolutionFuse_2_1/Modfied_15&RevolutionFuse_3_1/Modfied_15&RevolutionFuse_3_1/Modfied_4")) SketchConstraintCoincidence_122 = Sketch_10.setCoincident(SketchLine_77.startPoint(), SketchPoint_4.result()) SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_120") SketchPoint_5 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_8e-SketchLine_4e")) @@ -665,10 +665,10 @@ SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_121") SketchLine_78 = Sketch_10.addLine(64, -20, 89, -20) SketchLine_78.setName("SketchLine_77") SketchLine_78.result().setName("SketchLine_77") -SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_1_1/Modfied_9&RevolutionFuse_1_1/Modfied_4&RevolutionFuse_3_1/Modfied_8&RevolutionFuse_3_1/Modfied_17")) +SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_1_1/Modfied_4&RevolutionFuse_1_1/Modfied_10&RevolutionFuse_3_1/Modfied_17&RevolutionFuse_3_1/Modfied_8")) SketchConstraintCoincidence_124 = Sketch_10.setCoincident(SketchLine_78.startPoint(), SketchPoint_6.result()) SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_122") -SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_11&RevolutionFuse_1_1/Modfied_9&ExtrusionFuse_2_1/Modfied_12&RevolutionFuse_3_1/Modfied_8")) +SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_3&RevolutionFuse_1_1/Modfied_4&ExtrusionFuse_2_1/Modfied_4&RevolutionFuse_3_1/Modfied_17")) SketchConstraintCoincidence_125 = Sketch_10.setCoincident(SketchLine_78.endPoint(), SketchPoint_7.result()) SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_123") SketchArc_10 = Sketch_10.addArc(89.00000104846708, 1.669244441022778e-015, 89, -20, 89, 20, False) @@ -691,7 +691,7 @@ SketchConstraintCoincidence_129 = Sketch_10.setCoincident(SketchArc_11.startPoin SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_127") SketchConstraintTangent_19 = Sketch_10.setTangent(SketchArc_11.results()[1], SketchLine_78.result()) SketchConstraintTangent_19.setName("SketchConstraintTangent_24") -SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_16&RevolutionFuse_3_1/Modfied_17&ExtrusionCut_2_1/Modfied_2&RevolutionFuse_3_1/Modfied_2&RevolutionFuse_3_1/Modfied_1")) +SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_9&RevolutionFuse_3_1/Modfied_8&ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_7&RevolutionFuse_3_1/Modfied_24")) SketchConstraintCoincidence_130 = Sketch_10.setCoincident(SketchArc_11.endPoint(), SketchPoint_8.result()) SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_128") SketchArc_12 = Sketch_10.addArc(64.00001789135865, 23.01137360115889, 64, 20, 61.15622559702543, 22.02080994708722, True) @@ -702,7 +702,7 @@ SketchConstraintCoincidence_131 = Sketch_10.setCoincident(SketchArc_12.startPoin SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_129") SketchConstraintTangent_20 = Sketch_10.setTangent(SketchArc_12.results()[1], SketchLine_77.result()) SketchConstraintTangent_20.setName("SketchConstraintTangent_25") -SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_20&RevolutionFuse_3_1/Modfied_21&ExtrusionCut_2_1/Modfied_2&RevolutionFuse_3_1/Modfied_3&RevolutionFuse_3_1/Modfied_1")) +SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_5&RevolutionFuse_3_1/Modfied_4&ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_3&RevolutionFuse_3_1/Modfied_24")) SketchConstraintCoincidence_132 = Sketch_10.setCoincident(SketchArc_12.endPoint(), SketchPoint_9.result()) SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_130") SketchLine_79 = Sketch_10.addLine(61.15622559702543, 22.02080994708722, 59.81204392543111, 22.0208099470871) -- 2.39.2