From 59158bf5eb6ad677bddb39b5039884227eff2193 Mon Sep 17 00:00:00 2001
From: vsr <vsr@opencascade.com>
Date: Fri, 13 Dec 2013 12:49:38 +0000
Subject: [PATCH] SALOME 7.3.0 preparation

---
 config_files/ATOMGEN.sh         |   2 +-
 config_files/ATOMIC.sh          |   2 +-
 config_files/ATOMSOLV.sh        |   2 +-
 config_files/BLSURFPLUGIN.sh    |   4 +-
 config_files/CALCULATOR.sh      |   2 +-
 config_files/COMPONENT.sh       |   2 +-
 config_files/DOCUMENTATION.sh   |   2 +-
 config_files/GEOM.sh            |   4 +-
 config_files/GHS3DPLUGIN.sh     |   4 +-
 config_files/GHS3DPRLPLUGIN.sh  |   4 +-
 config_files/GUI.sh             |   2 +-
 config_files/HELLO.sh           |   2 +-
 config_files/HEXABLOCK.sh       |   4 +-
 config_files/HEXABLOCKPLUGIN.sh |   4 +-
 config_files/HOMARD.sh          |   6 +-
 config_files/HexoticPLUGIN.sh   |   4 +-
 config_files/JOBMANAGER.sh      |   2 +-
 config_files/KERNEL.sh          |   2 +-
 config_files/LIGHT.sh           |   2 +-
 config_files/MED.sh             |   4 +-
 config_files/NETGENPLUGIN.sh    |   4 +-
 config_files/PARAVIS.sh         |   2 +-
 config_files/PYCALCULATOR.sh    |   2 +-
 config_files/PYHELLO.sh         |   2 +-
 config_files/PYLIGHT.sh         |   2 +-
 config_files/RANDOMIZER.sh      |   2 +-
 config_files/SIERPINSKY.sh      |   2 +-
 config_files/SMESH.sh           |   4 +-
 config_files/YACS.sh            |   4 +-
 config_files/build.csh          | 462 --------------------------------
 30 files changed, 40 insertions(+), 506 deletions(-)
 delete mode 100755 config_files/build.csh

diff --git a/config_files/ATOMGEN.sh b/config_files/ATOMGEN.sh
index d4d9ef5..3751c9e 100755
--- a/config_files/ATOMGEN.sh
+++ b/config_files/ATOMGEN.sh
@@ -88,7 +88,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} ATOMGEN
+check_jb ./build.sh -d -p ${INST_ROOT} ATOMGEN
 
 cd ${CUR_DIR}
 
diff --git a/config_files/ATOMIC.sh b/config_files/ATOMIC.sh
index a60dffd..16954c0 100755
--- a/config_files/ATOMIC.sh
+++ b/config_files/ATOMIC.sh
@@ -88,7 +88,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} ATOMIC
+check_jb ./build.sh -d -p ${INST_ROOT} ATOMIC
 
 cd ${CUR_DIR}
 
diff --git a/config_files/ATOMSOLV.sh b/config_files/ATOMSOLV.sh
index 644004b..039a5df 100755
--- a/config_files/ATOMSOLV.sh
+++ b/config_files/ATOMSOLV.sh
@@ -88,7 +88,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} ATOMSOLV
+check_jb ./build.sh -d -p ${INST_ROOT} ATOMSOLV
 
 cd ${CUR_DIR}
 
diff --git a/config_files/BLSURFPLUGIN.sh b/config_files/BLSURFPLUGIN.sh
index 529d4e3..090b4a6 100755
--- a/config_files/BLSURFPLUGIN.sh
+++ b/config_files/BLSURFPLUGIN.sh
@@ -90,9 +90,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ "${INST_WITH_GUI}" = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} BLSURFPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF BLSURFPLUGIN
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} BLSURFPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} BLSURFPLUGIN
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/CALCULATOR.sh b/config_files/CALCULATOR.sh
index 2945af1..a121f6b 100755
--- a/config_files/CALCULATOR.sh
+++ b/config_files/CALCULATOR.sh
@@ -88,7 +88,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} CALCULATOR
+check_jb ./build.sh -d -p ${INST_ROOT} CALCULATOR
 
 cd ${CUR_DIR}
 
diff --git a/config_files/COMPONENT.sh b/config_files/COMPONENT.sh
index 8e8775d..71d6bfa 100755
--- a/config_files/COMPONENT.sh
+++ b/config_files/COMPONENT.sh
@@ -88,7 +88,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} COMPONENT
+check_jb ./build.sh -d -p ${INST_ROOT} COMPONENT
 
 cd ${CUR_DIR}
 
diff --git a/config_files/DOCUMENTATION.sh b/config_files/DOCUMENTATION.sh
index 44df1ec..dc3a661 100755
--- a/config_files/DOCUMENTATION.sh
+++ b/config_files/DOCUMENTATION.sh
@@ -69,7 +69,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} DOCUMENTATION
+check_jb ./build.sh -d -p ${INST_ROOT} DOCUMENTATION
 
 cd ${CUR_DIR}
 
diff --git a/config_files/GEOM.sh b/config_files/GEOM.sh
index f1bf210..3a26e32 100755
--- a/config_files/GEOM.sh
+++ b/config_files/GEOM.sh
@@ -89,9 +89,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ ${INST_WITH_GUI} = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} GEOM
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF GEOM
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} GEOM
+    check_jb ./build.sh -d -p ${INST_ROOT} GEOM
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/GHS3DPLUGIN.sh b/config_files/GHS3DPLUGIN.sh
index 719700f..7657600 100755
--- a/config_files/GHS3DPLUGIN.sh
+++ b/config_files/GHS3DPLUGIN.sh
@@ -89,9 +89,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ ${INST_WITH_GUI} = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} GHS3DPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF GHS3DPLUGIN
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} GHS3DPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} GHS3DPLUGIN
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/GHS3DPRLPLUGIN.sh b/config_files/GHS3DPRLPLUGIN.sh
index 34aeacb..b351cf4 100755
--- a/config_files/GHS3DPRLPLUGIN.sh
+++ b/config_files/GHS3DPRLPLUGIN.sh
@@ -88,9 +88,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ ${INST_WITH_GUI} = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} GHS3DPRLPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF GHS3DPRLPLUGIN
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} GHS3DPRLPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} GHS3DPRLPLUGIN
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/GUI.sh b/config_files/GUI.sh
index 995b261..c5f17ee 100755
--- a/config_files/GUI.sh
+++ b/config_files/GUI.sh
@@ -89,7 +89,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} GUI
+check_jb ./build.sh -d -p ${INST_ROOT} GUI
 
 cd ${CUR_DIR}
 
diff --git a/config_files/HELLO.sh b/config_files/HELLO.sh
index e2ab3c4..006c92a 100755
--- a/config_files/HELLO.sh
+++ b/config_files/HELLO.sh
@@ -87,7 +87,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} HELLO
+check_jb ./build.sh -d -p ${INST_ROOT} HELLO
 
 cd ${CUR_DIR}
 
diff --git a/config_files/HEXABLOCK.sh b/config_files/HEXABLOCK.sh
index ae667ba..e2fbe05 100755
--- a/config_files/HEXABLOCK.sh
+++ b/config_files/HEXABLOCK.sh
@@ -88,9 +88,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ "${INST_WITH_GUI}" = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} HEXABLOCK
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF HEXABLOCK
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} HEXABLOCK
+    check_jb ./build.sh -d -p ${INST_ROOT} HEXABLOCK
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/HEXABLOCKPLUGIN.sh b/config_files/HEXABLOCKPLUGIN.sh
index 530a1ac..bd4f3af 100755
--- a/config_files/HEXABLOCKPLUGIN.sh
+++ b/config_files/HEXABLOCKPLUGIN.sh
@@ -89,9 +89,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ "${INST_WITH_GUI}" = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} HEXABLOCKPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF HEXABLOCKPLUGIN
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} HEXABLOCKPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} HEXABLOCKPLUGIN
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/HOMARD.sh b/config_files/HOMARD.sh
index 5c45a9f..16cf0ff 100755
--- a/config_files/HOMARD.sh
+++ b/config_files/HOMARD.sh
@@ -88,11 +88,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-if [ "${INST_WITH_GUI}" = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} HOMARD
-else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} HOMARD
-fi
+check_jb ./build.sh -d -p ${INST_ROOT} HOMARD
 
 cd ${CUR_DIR}
 
diff --git a/config_files/HexoticPLUGIN.sh b/config_files/HexoticPLUGIN.sh
index ebc0540..33e50b5 100755
--- a/config_files/HexoticPLUGIN.sh
+++ b/config_files/HexoticPLUGIN.sh
@@ -88,9 +88,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ ${INST_WITH_GUI} = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} HexoticPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF HexoticPLUGIN
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} HexoticPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} HexoticPLUGIN
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/JOBMANAGER.sh b/config_files/JOBMANAGER.sh
index fe3e0f2..52b421b 100755
--- a/config_files/JOBMANAGER.sh
+++ b/config_files/JOBMANAGER.sh
@@ -82,7 +82,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} JOBMANAGER
+check_jb ./build.sh -d -p ${INST_ROOT} JOBMANAGER
 
 cd ${CUR_DIR}
 
diff --git a/config_files/KERNEL.sh b/config_files/KERNEL.sh
index c57e746..82fbe2a 100755
--- a/config_files/KERNEL.sh
+++ b/config_files/KERNEL.sh
@@ -88,7 +88,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} KERNEL
+check_jb ./build.sh -d -p ${INST_ROOT} KERNEL
 
 # create environment for the built binaries
 cd ${CUR_DIR}
diff --git a/config_files/LIGHT.sh b/config_files/LIGHT.sh
index 8c37a7d..d400d8b 100755
--- a/config_files/LIGHT.sh
+++ b/config_files/LIGHT.sh
@@ -85,7 +85,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} LIGHT
+check_jb ./build.sh -d -p ${INST_ROOT} LIGHT
 
 cd ${CUR_DIR}
 
diff --git a/config_files/MED.sh b/config_files/MED.sh
index 82ade62..80921c1 100755
--- a/config_files/MED.sh
+++ b/config_files/MED.sh
@@ -90,9 +90,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ ${INST_WITH_GUI} = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} MED
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF MED
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} MED
+    check_jb ./build.sh -d -p ${INST_ROOT} MED
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/NETGENPLUGIN.sh b/config_files/NETGENPLUGIN.sh
index f200fe9..4e2a37b 100755
--- a/config_files/NETGENPLUGIN.sh
+++ b/config_files/NETGENPLUGIN.sh
@@ -89,9 +89,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ ${INST_WITH_GUI} = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} NETGENPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF NETGENPLUGIN
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} NETGENPLUGIN
+    check_jb ./build.sh -d -p ${INST_ROOT} NETGENPLUGIN
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/PARAVIS.sh b/config_files/PARAVIS.sh
index 362ead0..32fe356 100755
--- a/config_files/PARAVIS.sh
+++ b/config_files/PARAVIS.sh
@@ -90,7 +90,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} PARAVIS
+check_jb ./build.sh -d -p ${INST_ROOT} PARAVIS
 
 cd ${CUR_DIR}
 
diff --git a/config_files/PYCALCULATOR.sh b/config_files/PYCALCULATOR.sh
index 1687806..83ec1df 100755
--- a/config_files/PYCALCULATOR.sh
+++ b/config_files/PYCALCULATOR.sh
@@ -88,7 +88,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} PYCALCULATOR
+check_jb ./build.sh -d -p ${INST_ROOT} PYCALCULATOR
 
 cd ${CUR_DIR}
 
diff --git a/config_files/PYHELLO.sh b/config_files/PYHELLO.sh
index ef2f8eb..aab25b5 100755
--- a/config_files/PYHELLO.sh
+++ b/config_files/PYHELLO.sh
@@ -86,7 +86,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} PYHELLO
+check_jb ./build.sh -d -p ${INST_ROOT} PYHELLO
 
 cd ${CUR_DIR}
 
diff --git a/config_files/PYLIGHT.sh b/config_files/PYLIGHT.sh
index efe2b26..1c6bac0 100755
--- a/config_files/PYLIGHT.sh
+++ b/config_files/PYLIGHT.sh
@@ -86,7 +86,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} PYLIGHT
+check_jb ./build.sh -d -p ${INST_ROOT} PYLIGHT
 
 cd ${CUR_DIR}
 
diff --git a/config_files/RANDOMIZER.sh b/config_files/RANDOMIZER.sh
index 4f9957c..a296ce2 100755
--- a/config_files/RANDOMIZER.sh
+++ b/config_files/RANDOMIZER.sh
@@ -87,7 +87,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} RANDOMIZER
+check_jb ./build.sh -d -p ${INST_ROOT} RANDOMIZER
 
 cd ${CUR_DIR}
 
diff --git a/config_files/SIERPINSKY.sh b/config_files/SIERPINSKY.sh
index b97f039..b37f3b0 100755
--- a/config_files/SIERPINSKY.sh
+++ b/config_files/SIERPINSKY.sh
@@ -87,7 +87,7 @@ fi
 
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
-check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} SIERPINSKY
+check_jb ./build.sh -d -p ${INST_ROOT} SIERPINSKY
 
 cd ${CUR_DIR}
 
diff --git a/config_files/SMESH.sh b/config_files/SMESH.sh
index 76286fc..e53379e 100755
--- a/config_files/SMESH.sh
+++ b/config_files/SMESH.sh
@@ -89,9 +89,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ ${INST_WITH_GUI} = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} SMESH
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF SMESH
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} SMESH
+    check_jb ./build.sh -d -p ${INST_ROOT} SMESH
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/YACS.sh b/config_files/YACS.sh
index cffa98d..5e32c33 100755
--- a/config_files/YACS.sh
+++ b/config_files/YACS.sh
@@ -88,9 +88,9 @@ fi
 CUR_DIR=`pwd`
 cd ${INST_ROOT}
 if [ "${INST_WITH_GUI}" = "FALSE" ] ; then
-    check_jb ./build.sh -o -b -w -d -v 0 -p ${INST_ROOT} YACS
+    check_jb ./build.sh -d -p ${INST_ROOT} -DSALOME_BUILD_GUI=OFF YACS
 else
-    check_jb ./build.sh -o -b -d -v 0 -p ${INST_ROOT} YACS
+    check_jb ./build.sh -d -p ${INST_ROOT} YACS
 fi
 
 cd ${CUR_DIR}
diff --git a/config_files/build.csh b/config_files/build.csh
deleted file mode 100755
index 2a3536d..0000000
--- a/config_files/build.csh
+++ /dev/null
@@ -1,462 +0,0 @@
-#!/bin/csh -f
-
-####################################################################################
-#  File      : build.csh
-#  Created   : Thu Jan 27 09:50:55 2005
-#  Author    : Vadim SANDLER, Open CASCADE SAS (vadim.sandler@opencascade.com)
-#  Project   : SALOME
-#  Module    : Installation Wizard
-#  Copyright : 2002-2013 CEA
-#
-#  This script is the part of the SALOME installation procedure.
-#
-#  This script can be used to build and install SALOME modules from sources.
-#  Try build.csh -h for more details about usage.
-#
-####################################################################################
-
-set is_build_configure=0
-set is_configure=0
-set inst_with_gui=1
-set is_delete=0
-set verbose_level=2
-set params=""
-set modules=(KERNEL GUI GEOM MED SMESH PARAVIS YACS NETGENPLUGIN GHS3DPLUGIN BLSURFPLUGIN HexoticPLUGIN GHS3DPRLPLUGIN COMPONENT CALCULATOR HELLO PYHELLO LIGHT PYLIGHT HEXABLOCK HEXABLOCKPLUGIN ATOMIC ATOMGEN ATOMSOLV HOMARD JOBMANAGER)
-set optim=""
-set is_install=1
-set is_help=0
-set is_tui=0
-set prefix=""
-set def_install_dir="/INSTALL"
-set b_params=""
-
-#########################################################
-# parse parameters
-#########################################################
-while ( ${%1} > 0 )
-    if ( "$1" == "-b" ) then
-	set is_build_configure=1
-	set is_configure=1
-    else if ( "$1" == "-c" ) then
-	set is_configure=1
-    else if ( "$1" == "-w" ) then
-	set inst_with_gui=0
-    else if ( "$1" == "-d" ) then
-	set is_delete=1
-    else if ( "$1" == "-o" ) then
-	set optim="--enable-production=yes --disable-debug"
-    else if ( "$1" == "-v" ) then
-	shift
-	set verbose_level=$1
-    else if ( "$1" == "-p" ) then
-	shift
-	set is_install=1
-	set prefix=$1
-    else if ( "$1" == "-h" ) then
-	set is_help=1
-    else if ( "$1" == "-t" ) then
-	set is_tui=1
-    else
-	set ckt=`echo ${modules} | grep -E "\<$1\>"`
-	if ( "$ckt" != "" ) then
-	    set params="$params $1"
-	else
-	    set b_params="$b_params $1"
-	    echo "\!\!\! Warning \!\!\! Unknown module: $1."
-	endif
-    endif
-    shift
-end
-
-#########################################################
-# if -h option is given - print help info and exit 
-#########################################################
-if ( $is_help == 1 ) then
-echo ""
-echo ""
-echo "Description:"
-echo "            Builds given SALOME modules by performing make and make install commands"
-echo ""
-echo "Usage:"
-echo "            build.csh [ <option> ] ... [ <module> [ <module> ... ] ]"
-echo ""
-echo "<module>    Modules to build, separated by space(s)."
-echo "            If no modules are given - all SALOME modules are assumed."
-echo "            Note, that modules given in command lines are automatically sorted in such order"
-echo "            to support correct modules dependencies."
-echo ""
-echo "Options:"
-echo "-b          Perform build_configure command for all given modules."
-echo "            This option forces configure (-c) key to be set. Default is off."
-echo ""
-echo "-c          Perform configure command for all given modules. Default is off."
-echo ""
-echo "-w          Add --without-gui key to build_configure and configure commands"
-echo "            to build SALOME module sources without GUI."
-echo "            By default sources are built with GUI."
-echo ""
-echo "-d          Delete build directories before calling configure, to force full rebuild"
-echo "            and reinstall of the module."
-echo "            Use this option carefully."
-echo ""
-echo "-o          Build sources in optimized mode. Default is off that means debug mode."
-echo "            Use this option together with -c or -b."
-echo "            This option can require -d option to be set (to ensure that previously"
-echo "            created build directories are removed to enforce rebuild in optimized mode)."
-echo ""
-echo "-t          Performs make dev_docs step to build TUI documentation for those modules"
-echo "            which support this. Default is off."
-echo ""
-echo "-p <prefix> Define the directory where to install modules after compilation."
-echo "            By default the directory where compilation is performed is used."
-echo ""
-echo "-v <level>  Verbose level (0-2, default 2): print information on build status:"
-echo "            0: only 'make' errors"
-echo "            1: 0 + compiler and other errors (including build_configure, configure)"
-echo "            2: 1 + compiler and other warnings "
-echo ""
-echo "-h          Prints this help information."
-echo ""
-echo "Note:       If no keys are given script just performs make step."
-echo ""
-echo "Example:"
-echo "            ./build.csh -o -p /home/user/salome -b KERNEL MED GEOM"
-echo ""
-echo "            This will make KERNEL, GEOM and MED modules: build_configure, configure, make"
-echo "            and install procedures will be performed for all specified modules."
-echo "            The modules will be built in the optimized mode"
-echo ""
-exit
-endif
-
-#########################################################
-# sort modules in proper order according to the dependancies
-#########################################################
-if ( "${params}" != "" ) then
-    set xparams=""
-    foreach module (${modules})
-	set ckt=`echo ${params} | grep -E "\<${module}\>"`
-	if ( "$ckt" != "" ) then
-	    set xparams="$xparams $module"
-	endif
-    end
-    set modules=($xparams $b_params)
-else if ( "${b_params}" != "" ) then
-    set modules=($b_params)
-endif
-
-echo ">>> The following modules will be built:"
-echo $modules
-
-#########################################################
-# set environment
-#########################################################
-set env_script=`dirname $0`/env_build.csh
-if ( ! -e $env_script ) then
-    set env_script=`dirname $0`/env_products.csh
-endif
-if ( ! -e $env_script ) then
-    set env_script=`dirname $0`/env.sh
-endif
-if ( -e $env_script ) then
-    echo ">>> Setting environment"
-    source $env_script
-else
-    echo "\!\!\! Warning \!\!\! Environment is not set."
-    echo "No environment file (env_build.sh, env_products.sh, env.sh) is found."
-    echo "Proceed with the current environment."
-endif
-
-set BUILD_DIR=${PWD}
-set LOG_DIR=${BUILD_DIR}/LOGS
-
-#########################################################
-# define installation prefix
-#########################################################
-if ( "$prefix" == "" ) then
-    echo "\!\!\! Warning \!\!\! Installation directory is not set."
-    echo "All the modules will be installed to the ${BUILD_DIR}${def_install_dir}"
-else
-    set is_absolute=`echo $prefix | grep -e "^/"`
-    if ( "$is_absolute" == "" ) then
-	set prefix=${BUILD_DIR}/$prefix
-	echo "\!\!\! Warning \!\!\! Relative prefix is used."
-	echo "All the modules will be installed to the $prefix"
-    endif
-endif
-
-#########################################################
-# create log directory
-#########################################################
-if ( ! -e ${LOG_DIR} ) then
-    mkdir -p ${LOG_DIR}
-endif
-
-echo "==========================================================================="
-echo "Starting SALOME build at `date`"
-echo "==========================================================================="
-
-#########################################################
-# loop for all given modules
-#########################################################
-foreach module (${modules})
-    echo ">>> Processing ${module} module"
-
-    set module_src=`printenv ${module}_SRC_DIR`
-    set module_build=${BUILD_DIR}/${module}_BUILD
-
-    if ( ${module_src} != "" ) then
-	cd ${BUILD_DIR}
-	#########################################################
-	# check if sources directory exists
-	#########################################################
-	if ( ! -e ${module_src} ) then
-	    echo "\!\!\! Error \!\!\! Can't find sources directory: ${module_src} does not exist."
-	    continue
-	endif
-	#########################################################
-	# check if configure script exists
-	#########################################################
-	set cfg_exist=0
-	if ( -e ${module_src}/configure ) then
-	    set cfg_exist=1
-	endif
-	#########################################################
-	# perform build_configure if -b flag is given or if 
-	# configure script does not exist (first compilation?)
-	#########################################################
-	if ( $is_build_configure == 1 || $cfg_exist == 0 ) then
-	    echo "... Performing build_configure"
-	    #########################################################
-	    # check if build_configure script exists
-	    #########################################################
-	    if ( ! -e ${module_src}/build_configure && "${module}" != "PARAVIS" ) then
-		echo "\!\!\! Warning \!\!\! Can not find build_configure script in ${module_src}."
-	    else
-		if ( "${module}" == "PARAVIS" ) then
-		    echo "\!\!\! Warning \!\!\! build_configure step is not executed for ${module}."
-		else
-		    #########################################################
-		    # call build_configure
-		    #########################################################
-		    if (! ($?BUILDCONF_OPTS) ) then
-			set mybuildconf_keys=""
-		    else
-			set mybuildconf_keys="${BUILDCONF_OPTS}"
-		    endif    
-		    if ( $inst_with_gui == 0 ) then
-			set mybuildconf_keys="${mybuildconf_keys} --without-gui"
-		    endif
-		    cd ${module_src}
-		    ./build_configure ${mybuildconf_keys} >& ${LOG_DIR}/build_configure_${module}.log
-		    #########################################################
-		    # echo possible errors
-		    #########################################################
-		    if ( $verbose_level > 0 ) then
-			cat ${LOG_DIR}/build_configure_${module}.log | grep -E "(failed|: error:)"
-		    endif
-		endif
-	    endif
-	endif
-	#########################################################
-	# deleting build directory if -d flag is given
-	#########################################################
-	if ( -e ${module_build} && $is_delete == 1 ) then
-	    echo "... Removing ${module_build}"
-	    chmod -R +w ${module_build} && rm -rf ${module_build} >& /dev/null
-	    if ( "$?" != "0" ) then
-		echo "\!\!\! Warning \!\!\! Cannot remove build directory ${module_build}. Permission denied."
-	    endif
-	endif
-	#########################################################
-	# creating build directory if it does not exist
-	#########################################################
-	if ( ! -e ${module_build} ) then
-	    mkdir -p ${module_build} >& /dev/null
-	    if ( "$?" != "0" ) then
-		echo "\!\!\! Error \!\!\! Cannot create build directory ${module_build}. Permission denied."
-		continue
-	    endif
-	endif
-	cd ${module_build}
-	#########################################################
-	# check if top Makefile exists in build directory, i.e. 
-	# is it necessary to run configure script
-	#########################################################
-	set mkfile_exist=0
-	if ( -e ${module_build}/Makefile ) then
-	    set mkfile_exist=1
-	endif
-	#########################################################
-	# check if configure options are changed from the 
-	# previous launch
-	#########################################################
-	set opts_changed=0
-	#########################################################
-	# define installation directory (by using module's version
-	# number); default is a build directory
-	#########################################################
-	set vx=""
-	if ( -e ${module_src}/configure.ac ) then
-	    set vx=`grep -e "^AC_INIT" ${module_src}/configure.ac | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
-	else if ( -e ${module_src}/configure.in.base ) then
-	    set vx=`grep -e "^VERSION=" ${module_src}/configure.in.base | awk -F= '{ if (NF>1) print $NF; }' | tr -d '[:space:]'`
-	    if ( "$vx" == "" ) then
-		set vx=`grep -e "^AC_INIT" ${module_src}/configure.in.base | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
-	    endif
-	else if ( -e ${module_src}/CMakeLists.txt ) then
-	    set ver_maj=`cat ${module_src}/CMakeLists.txt | grep SET\(VERSION_MAJOR | sed -e "s%[A-Z_() ]%%g"`
-	    set ver_min=`cat ${module_src}/CMakeLists.txt | grep SET\(VERSION_MINOR | sed -e "s%[A-Z_() ]%%g"`
-	    set ver_maintenance=`cat ${module_src}/CMakeLists.txt | grep SET\(VERSION_MAINTENANCE | sed -e "s%[A-Z_() ]%%g"`
-	    set vx="${ver_maj}.${ver_min}.${ver_maintenance}"
-	endif
-	if ( "$vx" != "" ) then
-	    set vx="_$vx"
-	endif
-	if ( "$prefix" == "" ) then
-	    set px=${BUILD_DIR}${def_install_dir}/${module}${vx}
-	else
-	    set px=${prefix}/${module}${vx}
-	endif
-	#########################################################
-	# perform configure if -c flag is given or if 
-	# Makefile does not exist (first compilation?)
-	#########################################################
-	if ( $is_configure == 1 || $mkfile_exist == 0 || $opts_changed == 1 ) then
-	    echo "... Performing configure"
-	    #########################################################
-	    # check if configure script exists
-	    #########################################################
-	    if ( ! -e ${module_src}/configure  && "${module}" != "PARAVIS" ) then
-		echo "\!\!\! Warning \!\!\! Can not find configure script in ${module_src}."
-	    else
-		if (! ($?BUILDCONF_OPTS) ) then
-		    set myconf_keys=""
-		else
-		    set myconf_keys="${CONF_OPTS}"
-		endif
-		if ( $inst_with_gui == 0 ) then
-		    set myconf_keys="${myconf_keys} --without-gui"
-		endif
-		if ( "${module}" == "MED" && ($?METIS_ROOT_DIR) && ($?SCOTCH_ROOT_DIR) ) then
-		    set myconf_keys="${myconf_keys} --enable-splitter=yes --with-metis=${METIS_ROOT_DIR} --with-scotch=${SCOTCH_ROOT_DIR}"
-		endif
-		if ( "${module}" == "NETGENPLUGIN" && ($?NETGEN_ROOT_DIR) ) then
-		    set myconf_keys="${myconf_keys} --with-netgen=${NETGEN_ROOT_DIR}"
-		endif
-		if ( "${module}" == "PARAVIS" )  then
-		    cd ${module_build}; cmake ${module_src} -DCMAKE_INSTALL_PREFIX=$px >& ${LOG_DIR}/configure_${module}.log
-		else
-		    ${module_src}/configure --prefix=$px ${optim} ${myconf_keys} >& ${LOG_DIR}/configure_${module}.log
-		endif
-
-		#########################################################
-		# echo possible errors
-		#########################################################
-		if ( $verbose_level > 0 ) then
-		    cat ${LOG_DIR}/configure_${module}.log | grep ": error:"
-		endif
-		if ( $verbose_level > 1 ) then
-		    cat ${LOG_DIR}/configure_${module}.log | grep ": WARNING:"
-		endif
-	    endif
-	endif
-	#########################################################
-	# perform make
-	#########################################################
-	echo "... Performing make"
-	#########################################################
-	# first clear dependencies
-	#########################################################
-	find . -name ".dep*" -type f -exec rm -f {} \; >& /dev/null
-        #########################################################
-        # then make
-        #########################################################
-	if ( "${module}" == "PARAVIS" )  then
-	    if ( ($?VTK_AUTOLOAD_PATH) ) then
-		setenv VTK_AUTOLOAD_PATH_BACKUP ${VTK_AUTOLOAD_PATH}
-		unsetenv VTK_AUTOLOAD_PATH
-	    endif
-	endif
-	make >& ${LOG_DIR}/make_${module}.log
-	set sts=$status
-	if ( "${module}" == "PARAVIS" )  then
-	    if ( ($?VTK_AUTOLOAD_PATH_BACKUP) ) then
-		setenv VTK_AUTOLOAD_PATH ${VTK_AUTOLOAD_PATH_BACKUP}
-	    endif
-	endif
-	#########################################################
-	# if make step is successful set the ${module}_ROOT_DIR
-	# environment variable
-	#########################################################
-	#if ( $sts == 0 ) then
-	#    setenv ${module}_ROOT_DIR ${module_build}
-	#endif
-	#########################################################
-	# print make errors
-	#########################################################
-	cat ${LOG_DIR}/make_${module}.log | grep -Ei '[*][*][*].*error'
-	#########################################################
-	# print compiler errors and warnings
-	# Note: here awk is used to concatenate together several lines of single
-	#       error or warning message produced by stupid gnu compiler
-	# Actually, instead of that we could use 'fmessage length=n' option of g++...
-	#########################################################
-	if ( $verbose_level > 0 ) then
-	    ###cat ${LOG_DIR}/make_${module}.log | grep ": error"
-	    cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep "${module_src}/[A-Za-z_0-9./]*:" | sed s@"^${module_src}/src/"@@
-	endif
-	if ( $verbose_level > 1 ) then
-	    cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep -E ": warning|* Warning" | sed s@"^${module_src}/src/"@@
-	endif
-	#########################################################
-	# perform make dev_docs step if -t flag is given
-	#########################################################
-	if ( $is_tui == 1 && $sts == 0 && -d ${module_build}/doc ) then
-	    cd ${module_build}/doc
-	    set dd=`cat Makefile | grep -E "dev_docs[[:space:]]*:"`
-	    if ( "$dd" != "" ) then
-		echo "... Performing make dev_docs"
-		make dev_docs >& ${LOG_DIR}/make_dev_docs_${module}.log
-		cat ${LOG_DIR}/make_dev_docs_${module}.log | grep '[*][*][*]'
-	    endif
-	endif
-	cd ${module_build}
-	#########################################################
-	# perform make if -i or -p flags are given
-	#########################################################
-	if ( $is_install == 1 && $sts == 0 || "${module}" == "KERNEL" ) then
-	    #########################################################
-	    # deleting build directory if -d flag is given
-	    #########################################################
-	    if ( -e $px && $is_delete == 1 ) then
-		echo "... Removing $px"
-		rm -rf $px >& /dev/null
-		if ( "$?" != "0" ) then
-		    echo "\!\!\! Warning \!\!\! Cannot remove install directory ${px}. Permission denied."
-		endif
-	    endif
-	    echo "... Performing make install"
-	    make install >& ${LOG_DIR}/make_install_${module}.log
-	    set sts=$status
-	    #########################################################
-	    # if make install step is successful set the 
-	    # ${module}_ROOT_DIR environment variable
-	    #########################################################
-	    if ( $sts == 0 ) then
-		setenv ${module}_ROOT_DIR $px
-	    endif
-	endif
-	echo ">>> Finished ${module} module"
-    else
-	echo "\!\!\! Error \!\!\! Can't find module sources. ${module}_SRC_DIR environment variable is not set."
-    endif
-end
-#########################################################
-# finalize
-#########################################################
-cd ${BUILD_DIR}
-
-echo "==========================================================================="
-echo "SALOME build finished at `date`"
-echo "==========================================================================="
-- 
2.39.2