From 2c2b4d9c92bdbeb304940997c85814389880d784 Mon Sep 17 00:00:00 2001 From: dbv Date: Thu, 6 Apr 2017 18:25:11 +0300 Subject: [PATCH] Added test model. --- test.models/flange.py | 154 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 154 insertions(+) create mode 100644 test.models/flange.py diff --git a/test.models/flange.py b/test.models/flange.py new file mode 100644 index 000000000..13e8585c1 --- /dev/null +++ b/test.models/flange.py @@ -0,0 +1,154 @@ +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +model.addParameter(Part_1_doc, "dint", "58") +model.addParameter(Part_1_doc, "thick", "16") +model.addParameter(Part_1_doc, "length", "172") +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) +SketchLine_1 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ")) +SketchArc_1 = Sketch_1.addArc(-1.656176621148808e-020, 61, -36.69142117459658, 34.94736842105263, -1.927105092898643e-024, 106, True) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.center()) +SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX")) +SketchLine_3 = Sketch_1.addLine(-46.47580015448901, 16.00000000000001, -86, 16) +SketchLine_4 = Sketch_1.addLine(-86, 16, -86, -1.232595164407831e-032) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchLine_5 = Sketch_1.addLine(-86, -1.232595164407831e-032, -46.47580015448901, 7.497132070176856e-024) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint()) +SketchArc_2 = Sketch_1.addArc(5.604803279647422e-025, 61, -23.64558253474002, 44.21052631578948, -7.759334428649666e-022, 90, True) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.center(), SketchArc_2.center()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_5.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_4.result()) +SketchArc_3 = Sketch_1.addArc(-46.47580015448901, 28.00000000000001, -36.69142117459658, 34.94736842105264, -46.47580015448901, 16.00000000000001, True) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchArc_3.startPoint()) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchArc_3.endPoint()) +SketchArc_4 = Sketch_1.addArc(-46.475800154489, 28, -23.64558253474002, 44.21052631578947, -46.475800154489, -2.594279994652913e-031, True) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchArc_4.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_5.endPoint()) +SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_3.results()[1], 12) +SketchConstraintRadius_1.setName("SketchConstraintRadius_3") +SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_3.results()[1]) +SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_3.result()) +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_4.center(), SketchArc_3.center()) +SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_5.result()) +SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_5.result(), 61) +SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchArc_2.results()[1]) +SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.result()) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), "thick") +SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result()) +SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.result()) +SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.result(), "length/2") +SketchConstraintMirror_1_objects = [SketchArc_2.results()[1], SketchArc_4.results()[1], SketchLine_5.result(), SketchLine_4.result(), SketchLine_3.result(), SketchArc_3.results()[1], SketchArc_1.results()[1]] +SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_1.result(), SketchConstraintMirror_1_objects) +[SketchArc_5, SketchArc_6, SketchLine_6, SketchLine_7, SketchLine_8, SketchArc_7, SketchArc_8] = SketchConstraintMirror_1.mirrored() +SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], "dint/2") +SketchConstraintRadius_2.setName("SketchConstraintRadius_5") +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2f-SketchArc_5_2r-SketchArc_6_2f-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchArc_7_2r-SketchArc_8_2f")], model.selection(), 35, 35) +Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) +SketchArc_9 = Sketch_2.addArc(-0.6283186887989762, 106, 0, 78.00705060867459, 0, 133.9929493913254, True) +SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_9.results()[1], 28) +SketchConstraintRadius_3.setName("SketchConstraintRadius_4") +SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX")) +SketchConstraintDistance_3 = Sketch_2.setDistance(SketchArc_9.center(), SketchLine_9.result(), "61+dint/2+thick") +SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OZ")) +SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_10.result()) +SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_10.result()) +SketchLine_11 = Sketch_2.addLine(0, 78.00705060867459, 0, 133.9929493913254) +SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_11.startPoint()) +SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_11.endPoint()) +model.do() +Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2f-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0) +Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_1_1")]) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ")) +SketchLine_12 = Sketch_3.addLine(2.220446049250313e-016, 106, -4, 106) +SketchLine_13 = Sketch_3.addLine(-4, 106, -4, 67.34428877022477) +SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint()) +SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18") +SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_12.result()) +SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_13.result()) +SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "PartSet/Origin")) +SketchConstraintDistance_4 = Sketch_3.setDistance(SketchPoint_1.coordinates(), SketchLine_12.result(), "61+90/2") +SketchConstraintDistance_4.setName("SketchConstraintDistance_5") +SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ")) +SketchLine_14.setName("SketchLine_15") +SketchLine_14.result().setName("SketchLine_15") +SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_12.startPoint(), SketchLine_14.result()) +SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_20") +SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_12.result(), "8/2") +SketchArc_10 = Sketch_3.addArc(0, 61, -4, 67.34428877022477, 4, 67.34428877022477, False) +SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.result(), SketchArc_10.center()) +SketchConstraintRadius_4 = Sketch_3.setRadius(SketchArc_10.results()[1], "15/2") +SketchConstraintRadius_4.setName("SketchConstraintRadius_6") +SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY")) +SketchLine_15.setName("SketchLine_16") +SketchLine_15.result().setName("SketchLine_16") +SketchConstraintDistance_5 = Sketch_3.setDistance(SketchArc_10.center(), SketchLine_15.result(), 61) +SketchConstraintDistance_5.setName("SketchConstraintDistance_6") +SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchArc_10.startPoint()) +SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21") +SketchConstraintMirror_2 = Sketch_3.addMirror(SketchLine_14.result(), [SketchLine_13.result(), SketchLine_12.result()]) +[SketchLine_16, SketchLine_17] = SketchConstraintMirror_2.mirrored() +SketchLine_17.setName("SketchLine_18") +SketchLine_17.result().setName("SketchLine_18") +SketchLine_16.setName("SketchLine_17") +SketchLine_16.result().setName("SketchLine_17") +SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_16.result()) +SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22") +model.do() +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_12f-SketchLine_13f-SketchLine_17r-SketchLine_18r-SketchArc_10_2f")], model.selection(), "172/2", "172/2") +Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")]) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4")) +SketchLine_18 = Sketch_4.addLine(-65, 16, -65, -16) +SketchLine_18.setName("SketchLine_19") +SketchLine_18.result().setName("SketchLine_19") +SketchLine_18.setAuxiliary(True) +SketchConstraintVertical_3 = Sketch_4.setVertical(SketchLine_18.result()) +SketchConstraintLength_3 = Sketch_4.setLength(SketchLine_18.result(), 32) +SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin")) +SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_2.coordinates(), SketchLine_18.result(), "130/2") +SketchConstraintDistance_6.setName("SketchConstraintDistance_7") +SketchPoint_3 = Sketch_4.addPoint(-65, 0) +SketchPoint_3.setAuxiliary(True) +SketchConstraintMiddle_1 = Sketch_4.setMiddlePoint(SketchPoint_3.coordinates(), SketchLine_18.result()) +SketchLine_19 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX")) +SketchLine_19.setName("SketchLine_20") +SketchLine_19.result().setName("SketchLine_20") +SketchConstraintCoincidence_22 = Sketch_4.setCoincident(SketchPoint_3.coordinates(), SketchLine_19.result()) +SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23") +SketchArc_11 = Sketch_4.addArc(-65, 16, -59, 16, -71, 16, False) +SketchConstraintCoincidence_23 = Sketch_4.setCoincident(SketchLine_18.startPoint(), SketchArc_11.center()) +SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24") +SketchArc_12 = Sketch_4.addArc(-65, -16, -59, -16.00003459934639, -71, -16, True) +SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchLine_18.endPoint(), SketchArc_12.center()) +SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25") +SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_11.results()[1], 6) +SketchConstraintRadius_5.setName("SketchConstraintRadius_7") +SketchLine_20 = Sketch_4.addLine(-71, 16, -71, -16) +SketchLine_20.setName("SketchLine_21") +SketchLine_20.result().setName("SketchLine_21") +SketchConstraintCoincidence_25 = Sketch_4.setCoincident(SketchArc_11.endPoint(), SketchLine_20.startPoint()) +SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26") +SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchArc_12.endPoint(), SketchLine_20.endPoint()) +SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27") +SketchLine_21 = Sketch_4.addLine(-59, 16, -59, -16.00003459934639) +SketchLine_21.setName("SketchLine_22") +SketchLine_21.result().setName("SketchLine_22") +SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchArc_11.startPoint(), SketchLine_21.startPoint()) +SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28") +SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_12.startPoint(), SketchLine_21.endPoint()) +SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29") +SketchConstraintVertical_4 = Sketch_4.setVertical(SketchLine_20.result()) +SketchConstraintVertical_5 = Sketch_4.setVertical(SketchLine_21.result()) +SketchConstraintTangent_5 = Sketch_4.setTangent(SketchLine_20.result(), SketchArc_11.results()[1]) +SketchConstraintTangent_6 = Sketch_4.setTangent(SketchLine_21.result(), SketchArc_11.results()[1]) +SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_12.results()[1], SketchLine_20.result()) +model.do() +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchLine_21f-SketchLine_22r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"), 0) +MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "Extrusion_1_1/To_Face_1&Extrusion_1_1/Generated_Face_2"), -130, 2) +Boolean_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_2_1")], [model.selection("COMPOUND", "MultiTranslation_1_1")]) +model.do() +model.end() -- 2.39.2