nds [Fri, 15 Apr 2016 12:26:58 +0000 (15:26 +0300)]
Wrap tool tip text by word in Widget action
nds [Fri, 15 Apr 2016 11:33:55 +0000 (14:33 +0300)]
Skip spaces in XML row
nds [Fri, 15 Apr 2016 10:05:21 +0000 (13:05 +0300)]
Action button to call customAction of a feature.
nds [Fri, 15 Apr 2016 08:54:28 +0000 (11:54 +0300)]
Issue #1404 Random crash with Shaper. REDISPLAY is not flushed in deleteFeature. It improves the application performance. Problem case is "Delete" in Sketch: create a rectangle, a lenght, select a line, after a lenght(or with rectangle so, that the line is the first), call Delete action. Result: warning message(in Debug mode) about empty AIS(it's caused a crash).
Additionaly performance of fillet, mirror, rotation are improved by this modification.
dbv [Fri, 15 Apr 2016 09:08:04 +0000 (12:08 +0300)]
Issue #1369: Wire feature draft implementation.
mpv [Fri, 15 Apr 2016 05:48:36 +0000 (08:48 +0300)]
Remove generation of error changed events since it is not used anymore
nds [Fri, 15 Apr 2016 05:34:00 +0000 (08:34 +0300)]
Issue #1303 Re-ordering of Sketcher menus: Delete to be the last
dbv [Thu, 14 Apr 2016 15:18:39 +0000 (18:18 +0300)]
Fix for SWIG
dbv [Thu, 14 Apr 2016 08:04:40 +0000 (11:04 +0300)]
Fix naming
nds [Thu, 14 Apr 2016 14:47:52 +0000 (17:47 +0300)]
1. Correction for perfomance problem by Apply button state update: do not flush updated signal for each widget filling for the feature when operation is started. Do it once after the widgets are filled by feature on start operation.
nds [Thu, 14 Apr 2016 14:08:56 +0000 (17:08 +0300)]
1. Correction for perfomance problem by Apply button state update: correction to reset of widget
nds [Thu, 14 Apr 2016 13:27:01 +0000 (16:27 +0300)]
1. Correction for perfomance problem by Apply button state update: do not listen EVENT_OBJECT_ERROR_CHANGED, perform update after flushing Updated signal of modified value
2. Layout correction for Extrusion's multi-selector height(regression)
3. Issue #1343 correction to do not show preview planes if there is a visualized sketch
nds [Thu, 14 Apr 2016 10:07:00 +0000 (13:07 +0300)]
Issue 1303 Re-ordering of Sketcher menus: popup menu Delete is the last, Edit is the first
nds [Thu, 14 Apr 2016 08:00:51 +0000 (11:00 +0300)]
Issue 1303 Re-ordering of Sketcher menus: rearrange Sketch actions in XML
nds [Thu, 14 Apr 2016 07:59:56 +0000 (10:59 +0300)]
Issue 1303 Re-ordering of Sketcher menus: rearrange Sketch actions in XML
nds [Thu, 14 Apr 2016 07:22:01 +0000 (10:22 +0300)]
Issue 1303 Re-ordering of Sketcher menus: using menu mechanizm to group SALOME actions.
dbv [Wed, 13 Apr 2016 13:58:39 +0000 (16:58 +0300)]
Issue #1343: Make faces with/without holes from sketch wires.
nds [Wed, 13 Apr 2016 13:53:10 +0000 (16:53 +0300)]
Issue 1303 Re-ordering of Sketcher menus:compilation correction on Linux
dbv [Wed, 13 Apr 2016 12:51:39 +0000 (15:51 +0300)]
Issue #1343: Make faces with/without holes from sketch wires.
nds [Wed, 13 Apr 2016 07:52:10 +0000 (10:52 +0300)]
Issue 1303 Re-ordering of Sketcher menus:compilation correction on Linux
nds [Wed, 13 Apr 2016 07:24:59 +0000 (10:24 +0300)]
Issue 1303 Re-ordering of Sketcher menus: additional structure for feature info to store the XML order.
nds [Wed, 13 Apr 2016 06:25:14 +0000 (09:25 +0300)]
Issue 1303 Re-ordering of Sketcher menus: compilation correction for SALOME mode
nds [Wed, 13 Apr 2016 06:11:00 +0000 (09:11 +0300)]
Issue 1303 Re-ordering of Sketcher menus: separation of the current menu build functionality in XGUI_MenuMgr class.
nds [Tue, 12 Apr 2016 13:28:41 +0000 (16:28 +0300)]
Issue #1383 Preview button: correction for the case: switch off auto_preview in extrusion, start extrusion, select sketch, enter height=0, click Enter to validate it, Apply is still green.
mpv [Tue, 12 Apr 2016 12:49:05 +0000 (15:49 +0300)]
Make the feature with "preview" button updates the property panel "Apply" button correctly.
nds [Tue, 12 Apr 2016 12:41:11 +0000 (15:41 +0300)]
Issue #1383 Preview button: store modified value before See preview
mpv [Tue, 12 Apr 2016 11:59:41 +0000 (14:59 +0300)]
Merge branch 'master' of salome:modules/shaper
mpv [Tue, 12 Apr 2016 11:58:57 +0000 (14:58 +0300)]
Fix for the issue #1085
nds [Tue, 12 Apr 2016 11:57:20 +0000 (14:57 +0300)]
Issue #1383 Preview button: compilation correction on Linux
nds [Tue, 12 Apr 2016 11:47:16 +0000 (14:47 +0300)]
Issue #1383 Preview button: using Config_FeatureMessage instead of list of parameters in SALOME mode.
nds [Tue, 12 Apr 2016 10:54:32 +0000 (13:54 +0300)]
Issue #1383 Preview button: using Config_FeatureMessage instead of list of parameters.
mpv [Tue, 12 Apr 2016 10:24:00 +0000 (13:24 +0300)]
Issue #1383 Preview button: implementation on the Updater level
nds [Tue, 12 Apr 2016 08:18:26 +0000 (11:18 +0300)]
Issue #1383 Preview button: providing the Preview button, which sends signals to the model. Currently this is only for extrusion feature.
mpv [Tue, 12 Apr 2016 07:01:56 +0000 (10:01 +0300)]
In the frames of stopping the update cycling.
mpv [Tue, 12 Apr 2016 06:18:42 +0000 (09:18 +0300)]
Stop the infinitive cycling loop in update if bad dependencies graph presented in the tree.
mpv [Mon, 11 Apr 2016 13:38:48 +0000 (16:38 +0300)]
Fix for unit tests
mpv [Mon, 11 Apr 2016 13:08:54 +0000 (16:08 +0300)]
Fixes for crashes and bad behavior on delete of features and Parts. For now delete of Part with content crashes the application (problem in OB).
nds [Mon, 11 Apr 2016 12:35:37 +0000 (15:35 +0300)]
Issue #1393. An attempt to make infinite lines and use the edges' direction vectors.
nds [Mon, 11 Apr 2016 10:14:14 +0000 (13:14 +0300)]
Issue #1299, #1393. The presentation should not be changed automatically by distance value update from the first edges points to the center. The flag is introduced in OCCT presentation. Case: in the #1393 after input of value 55 degree, the AIS presentation is incorrect place.
dbv [Mon, 11 Apr 2016 08:13:22 +0000 (11:13 +0300)]
PythonAPI fix
dbv [Mon, 11 Apr 2016 08:02:47 +0000 (11:02 +0300)]
Commented PythonAPI Extrusion and Revolution tests
nds [Mon, 11 Apr 2016 05:58:39 +0000 (08:58 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: correction for case: create Sketch, create Extrusion on the sketch, delete Sketch, Ok, crash.
nds [Mon, 11 Apr 2016 04:53:58 +0000 (07:53 +0300)]
Issue #1393 Angle constraint : incorrect angle displayed. solution: arc's passed point correction
dbv [Fri, 8 Apr 2016 15:32:33 +0000 (18:32 +0300)]
Issue #1385: Fixed GeomAlgoAPI_ShapeTools::volume
dbv [Fri, 8 Apr 2016 14:41:38 +0000 (17:41 +0300)]
Test fixes
nds [Fri, 8 Apr 2016 11:10:37 +0000 (14:10 +0300)]
Issue #1393 Angle constraint : incorrect angle displayed. solution: arc's passed point correction
nds [Fri, 8 Apr 2016 08:20:42 +0000 (11:20 +0300)]
Issue #1393 Angle constraint : incorrect angle displayed. solution: do not select any object in the viewer when passed through point widget is active. This commit is a validator creator for such widgets(a candidate to replace WidgetValidated). It is used now for Distance of Circle widget and Flyout point of dimensional constraints. The next integration is for the bug purpose(arc's passed point)
nds [Fri, 8 Apr 2016 08:20:22 +0000 (11:20 +0300)]
Issue #1393 Angle constraint : incorrect angle displayed. solution: do not select any object in the viewer when passed through point widget is active. This commit is a validator creator for such widgets(a candidate to replace WidgetValidated). It is used now for Distance of Circle widget and Flyout point of dimensional constraints. The next integration is for the bug purpose(arc's passed point)
dbv [Fri, 8 Apr 2016 08:19:47 +0000 (11:19 +0300)]
Fixes for naming in revolution
nds [Fri, 8 Apr 2016 05:56:05 +0000 (08:56 +0300)]
Issue 1299 angle constraint: final correction to calculate reverse state in SketcherPrs by product of scalar. Providing corresponded method in AIS_AngleDimension. It is ready to be integrated as a patch for OCCT.
dbv [Thu, 7 Apr 2016 16:46:51 +0000 (19:46 +0300)]
Extrusion fix
dbv [Thu, 7 Apr 2016 16:36:56 +0000 (19:36 +0300)]
Pipe validator fix
dbv [Thu, 7 Apr 2016 15:38:24 +0000 (18:38 +0300)]
Removed unused fields from pipe algo
dbv [Thu, 7 Apr 2016 15:38:24 +0000 (18:38 +0300)]
Removed unused fields from pipe algo
mpv [Thu, 7 Apr 2016 15:21:28 +0000 (18:21 +0300)]
Fix the fang up on selection of trihedron point and axes in the sketch
dbv [Thu, 7 Apr 2016 15:08:06 +0000 (18:08 +0300)]
Issue #1343 Revolution fixes
nds [Thu, 7 Apr 2016 13:41:45 +0000 (16:41 +0300)]
Issue 1299 angle constraint: support of additional and complementary angles: value correction
nds [Thu, 7 Apr 2016 10:42:38 +0000 (13:42 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: correction for case: face selection(global) should not start a new Sketch creation.
nds [Thu, 7 Apr 2016 10:11:14 +0000 (13:11 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: correction for case: plane selection filter is ignored in Sketch started under Extrusion
dbv [Thu, 7 Apr 2016 09:35:18 +0000 (12:35 +0300)]
Compilation fix. Validator fix.
dbv [Thu, 7 Apr 2016 09:11:20 +0000 (12:11 +0300)]
Issue #1343 Fixes
nds [Thu, 7 Apr 2016 09:07:50 +0000 (12:07 +0300)]
Correction for case: Clean history should be disabled on features in diactivated parts
mpv [Thu, 7 Apr 2016 09:07:45 +0000 (12:07 +0300)]
Issue #1306: correct detection of the feature but sub-shape selection
nds [Thu, 7 Apr 2016 08:43:56 +0000 (11:43 +0300)]
Correction for case: Start Arc, select "2 points type", move mouse in viewer, result: crash(in background mode)
nds [Thu, 7 Apr 2016 08:43:31 +0000 (11:43 +0300)]
Correction for case: Start Arc, select "2 points type", move mouse in viewer, result: crash(in background mode)
vsv [Thu, 7 Apr 2016 08:16:53 +0000 (11:16 +0300)]
Issue #1126: Highlight results by feature
nds [Thu, 7 Apr 2016 07:09:53 +0000 (10:09 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: correction for case: create Extrusion with a construction Plane selected as a bounding plane(From/To); edit extrusion. Problem: is is not possible to deselect the plane by click in viewer.
nds [Wed, 6 Apr 2016 16:07:21 +0000 (19:07 +0300)]
Issue #1348 Creation of a Qt panel: providing additional sample for ModuleBase_ModelWidget using.
dbv [Wed, 6 Apr 2016 16:03:54 +0000 (19:03 +0300)]
Issue #1343 Revolution fixes
nds [Wed, 6 Apr 2016 16:01:55 +0000 (19:01 +0300)]
Issue #1348 Creation of a Qt panel: providing additional sample for ModuleBase_ModelWidget using.
nds [Wed, 6 Apr 2016 15:54:28 +0000 (18:54 +0300)]
ModuleBase_ViewerPrs is wrapped into shared_ptr: remove include of this class from headers.
nds [Wed, 6 Apr 2016 15:26:49 +0000 (18:26 +0300)]
ModuleBase_ViewerPrs is wrapped into shared_ptr: remove include of this class from headers.
nds [Wed, 6 Apr 2016 15:04:08 +0000 (18:04 +0300)]
ModuleBase_ViewerPrs is wrapped into shared_ptr.
nds [Wed, 6 Apr 2016 14:53:20 +0000 (17:53 +0300)]
ModuleBase_ViewerPrs is wrapped into shared_ptr.
mpv [Wed, 6 Apr 2016 14:39:13 +0000 (17:39 +0300)]
Fix for the delete of extrusion created on some sketch crash
vsv [Wed, 6 Apr 2016 14:27:35 +0000 (17:27 +0300)]
Issue #1306: Find Feature by history from result and shape
dbv [Wed, 6 Apr 2016 13:56:09 +0000 (16:56 +0300)]
Composite features fix.
vsv [Wed, 6 Apr 2016 14:10:43 +0000 (17:10 +0300)]
Issue #1306: Provide selection preferences in SHAPER module
mpv [Wed, 6 Apr 2016 14:01:57 +0000 (17:01 +0300)]
Creation of producedByFeature initial implementation neede for the issue #1306
nds [Wed, 6 Apr 2016 13:35:43 +0000 (16:35 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: transaction correction: sketch creation is sketch transaction(was: sketch in extrusion, edit sketch transaction), disable/enable selection control in widget sketch creator.
vsv [Wed, 6 Apr 2016 13:01:26 +0000 (16:01 +0300)]
Fix compilation errors
vsv [Wed, 6 Apr 2016 12:20:21 +0000 (15:20 +0300)]
Issue #1306: Set default selection mode at neutral point in local selection
nds [Wed, 6 Apr 2016 10:47:06 +0000 (13:47 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: compilation correction
nds [Wed, 6 Apr 2016 10:17:46 +0000 (13:17 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: filling extrusion list by the sub-feature in Widget sketch creator.
dbv [Wed, 6 Apr 2016 09:34:37 +0000 (12:34 +0300)]
Issue #1343 Fixes for naming when creating extrusion from vertex or edge
nds [Tue, 5 Apr 2016 14:42:59 +0000 (17:42 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: setSketchObjectToList is perfomed on the GUI level. Reason: if execute is started before, there is a crash if sketch contains only one not-closed contour.
dbv [Tue, 5 Apr 2016 14:13:40 +0000 (17:13 +0300)]
Issue #1343 Fixes
dbv [Tue, 5 Apr 2016 11:57:19 +0000 (14:57 +0300)]
Issue #1343 Extrusion fixes
nds [Tue, 5 Apr 2016 11:54:49 +0000 (14:54 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: sketch creator setSelection in two ways(Sketch or Selection list), so the validators should be checked in the same manner, in two ways(call validator for Sektch after(if invalid) validator for Selection list).
nds [Tue, 5 Apr 2016 09:26:01 +0000 (12:26 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: sketch creator setSelection in two ways(Sketch or Selection list), so the validators should be checked in the same manner, in two ways(call validator for Sektch after(if invalid) validator for Selection list).
dbv [Tue, 5 Apr 2016 07:54:07 +0000 (10:54 +0300)]
Issue #1343 Fixes for creating extrusion on vertex
nds [Tue, 5 Apr 2016 06:20:59 +0000 (09:20 +0300)]
#1371 Using auxilliary Sketch elements in any Feature: construction default line width should be equal 2, not 3.
dbv [Tue, 5 Apr 2016 06:20:02 +0000 (09:20 +0300)]
#Issue 1343 Fixes for extrusion creation
nds [Tue, 5 Apr 2016 06:19:05 +0000 (09:19 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: in Axis construction creation it is not possible to select points.
dbv [Tue, 5 Apr 2016 05:44:30 +0000 (08:44 +0300)]
Issue #1343 validators update
nds [Mon, 4 Apr 2016 13:22:25 +0000 (16:22 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: Open saved study, activate part, start extrusion, Crash. Additionaly the validation for attribute selection is called in widget sketch creator.
nds [Mon, 4 Apr 2016 12:16:39 +0000 (15:16 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: Create Sketch, Extrusion on the sketch, Save/Open -> crash.
nds [Mon, 4 Apr 2016 08:06:32 +0000 (11:06 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: Clean History on Extrusion.
nds [Mon, 4 Apr 2016 05:35:19 +0000 (08:35 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: Clean History, as Delete, should be disabled on Sketch created under an Extrusion.
nds [Mon, 4 Apr 2016 05:19:54 +0000 (08:19 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: start Extrusion, select plane, abort Sketch, move over plane. Error message is about modification out of transaction.