]> SALOME platform Git repositories - modules/shaper.git/log
Salome HOME
modules/shaper.git
8 years agoUpdate SolveSpaceSolver for correct processing of duplicated constraints (issues...
azv [Wed, 23 Dec 2015 15:00:32 +0000 (18:00 +0300)]
Update SolveSpaceSolver for correct processing of duplicated constraints (issues # 1103, #1147)

8 years agoFix undo of arc creation (issue #1166)
azv [Wed, 23 Dec 2015 13:10:53 +0000 (16:10 +0300)]
Fix undo of arc creation (issue #1166)

8 years agoFix for issue #1162
azv [Wed, 23 Dec 2015 12:51:07 +0000 (15:51 +0300)]
Fix for issue #1162

8 years agoDisable update of sketch parameters from solver
azv [Wed, 23 Dec 2015 12:10:47 +0000 (15:10 +0300)]
Disable update of sketch parameters from solver

8 years agoUpdate conditions to add arc into solver (issue #1165)
azv [Wed, 23 Dec 2015 11:24:35 +0000 (14:24 +0300)]
Update conditions to add arc into solver (issue #1165)

8 years agoSwitch off silent removing points of entities in SolveSpace solver (issue #1164)
azv [Wed, 23 Dec 2015 10:57:40 +0000 (13:57 +0300)]
Switch off silent removing points of entities in SolveSpace solver (issue #1164)

8 years agoFix regression found in squish test for Platine
azv [Wed, 23 Dec 2015 10:28:00 +0000 (13:28 +0300)]
Fix regression found in squish test for Platine

8 years agoMake salome_run.sh and linux_run.sh supporting args ss/gcs to select a solver
spo [Wed, 23 Dec 2015 09:36:23 +0000 (12:36 +0300)]
Make salome_run.sh and linux_run.sh supporting args ss/gcs to select a solver

8 years ago#1145 synchronization between object browser and viewer is lost
nds [Wed, 23 Dec 2015 09:06:21 +0000 (12:06 +0300)]
#1145 synchronization between object browser and viewer is lost

8 years agoissue #1152 arc validation problem
nds [Wed, 23 Dec 2015 08:44:43 +0000 (11:44 +0300)]
issue #1152 arc validation problem

in additional, it is corrected that the external object is immediately visualized in the viewer after the end point click.

8 years agoMake salome_run.sh use Squish preferences only if environment contains SALOME_SQUISH_...
spo [Wed, 23 Dec 2015 07:50:34 +0000 (10:50 +0300)]
Make salome_run.sh use Squish preferences only if environment contains SALOME_SQUISH_PREFS=TRUE

8 years ago#1141 Part is not deleted
nds [Mon, 21 Dec 2015 12:08:11 +0000 (15:08 +0300)]
#1141 Part is not deleted

it is not necessary warn here by DELETE message

8 years agoUpdate environment to compile PlaneGCS solver on Windows
azv [Tue, 22 Dec 2015 14:49:42 +0000 (17:49 +0300)]
Update environment to compile PlaneGCS solver on Windows

8 years agoMerge branch 'Dev_2.1.0' of salome:modules/shaper into Dev_2.1.0
mpv [Tue, 22 Dec 2015 14:08:19 +0000 (17:08 +0300)]
Merge branch 'Dev_2.1.0' of salome:modules/shaper into Dev_2.1.0

8 years agoFor the issue #1156 : do not cause Placement error on activation of previous Part...
mpv [Tue, 22 Dec 2015 14:08:00 +0000 (17:08 +0300)]
For the issue #1156 : do not cause Placement error on activation of previous Part. THe Placement should be disabled at that time.

8 years agoFix regressions in test cases
azv [Tue, 22 Dec 2015 14:07:27 +0000 (17:07 +0300)]
Fix regressions in test cases

8 years agoFix compilation errors in solvers.
azv [Tue, 22 Dec 2015 13:39:29 +0000 (16:39 +0300)]
Fix compilation errors in solvers.
Make SolveSpace solver default.

8 years agoMerge remote-tracking branch 'remotes/origin/BR_PlaneGCS' into CodeCleanup
azv [Tue, 22 Dec 2015 13:23:20 +0000 (16:23 +0300)]
Merge remote-tracking branch 'remotes/origin/BR_PlaneGCS' into CodeCleanup

8 years ago"Conflicting constraints" should appear when a center of fillet is coincident with...
azv [Tue, 22 Dec 2015 13:10:48 +0000 (16:10 +0300)]
"Conflicting constraints" should appear when a center of fillet is coincident with fillet base point (issue #1138)

8 years ago2D point selection in multi-rotation/multi-translation.
nds [Tue, 22 Dec 2015 10:40:29 +0000 (13:40 +0300)]
2D point selection in multi-rotation/multi-translation.

It seems that this modification is excessive.

8 years ago2D point selection in multi-rotation/multi-translation.
nds [Tue, 22 Dec 2015 10:29:16 +0000 (13:29 +0300)]
2D point selection in multi-rotation/multi-translation.

8 years agoFix compilation on Linux BR_PlaneGCS
spo [Tue, 22 Dec 2015 09:54:56 +0000 (12:54 +0300)]
Fix compilation on Linux

8 years agoRemove typo caused a limitation on a number of translated objects
azv [Tue, 22 Dec 2015 08:41:40 +0000 (11:41 +0300)]
Remove typo caused a limitation on a number of translated objects

8 years agoFix for the issue #1156
mpv [Tue, 22 Dec 2015 08:34:52 +0000 (11:34 +0300)]
Fix for the issue #1156

8 years agoSecond phase of SketchSolver refactoring
azv [Wed, 16 Dec 2015 05:18:01 +0000 (08:18 +0300)]
Second phase of SketchSolver refactoring

2. Implementation of PlaneGCS solver connection.
3. Update test cases according new behavior.

8 years agoSecond phase of SketchSolver refactoring
azv [Tue, 15 Dec 2015 14:15:46 +0000 (17:15 +0300)]
Second phase of SketchSolver refactoring

1. Environment for PlaneGCS solver

8 years agoFix the problem removing multi-coincidence between points (issue #1123)
azv [Tue, 22 Dec 2015 08:04:22 +0000 (11:04 +0300)]
Fix the problem removing multi-coincidence between points (issue #1123)

8 years agoFix suite_PYTHONAPI_SALOME/tst_Platine
spo [Tue, 22 Dec 2015 07:52:46 +0000 (10:52 +0300)]
Fix suite_PYTHONAPI_SALOME/tst_Platine

8 years agoAdd Squish test for the issue #1157
spo [Mon, 21 Dec 2015 14:01:59 +0000 (17:01 +0300)]
Add Squish test for the issue #1157

8 years agoIssue #1157: Using parameters in point coordinates
spo [Mon, 21 Dec 2015 12:00:57 +0000 (15:00 +0300)]
Issue #1157: Using parameters in point coordinates

8 years agoSpell-checking
spo [Mon, 21 Dec 2015 11:04:21 +0000 (14:04 +0300)]
Spell-checking

8 years agoCrash on abort constraints (issues #1153, #1154, #1159)
azv [Tue, 22 Dec 2015 06:32:12 +0000 (09:32 +0300)]
Crash on abort constraints (issues #1153, #1154, #1159)

8 years agoCompilation errors on Linux (part 2)
azv [Tue, 22 Dec 2015 06:17:23 +0000 (09:17 +0300)]
Compilation errors on Linux (part 2)

8 years agoFix compilation error on Linux
azv [Tue, 22 Dec 2015 05:55:12 +0000 (08:55 +0300)]
Fix compilation error on Linux

8 years agoUpdate removing point-point coincidences.
azv [Tue, 22 Dec 2015 05:41:40 +0000 (08:41 +0300)]
Update removing point-point coincidences.
Updated procedure of removing Fixed constraint.

8 years agoAdd arc to solver if any its attribute is added
azv [Wed, 16 Dec 2015 05:18:01 +0000 (08:18 +0300)]
Add arc to solver if any its attribute is added

8 years agoImprovement #996: topological reference syntax
dbv [Mon, 21 Dec 2015 16:45:46 +0000 (19:45 +0300)]
Improvement #996: topological reference syntax

8 years agoBug #1045: Group not exported in GEOM
dbv [Mon, 21 Dec 2015 14:20:46 +0000 (17:20 +0300)]
Bug #1045: Group not exported in GEOM

8 years agoFix for the issue #1146 : ability to export groups that has been created on the previ...
mpv [Mon, 21 Dec 2015 13:57:33 +0000 (16:57 +0300)]
Fix for the issue #1146 : ability to export groups that has been created on the previous topology and moved to the end

8 years agoFix for opening old saves without copy attribute in SketchPlugin_SketchEntity
dbv [Mon, 21 Dec 2015 13:07:39 +0000 (16:07 +0300)]
Fix for opening old saves without copy attribute in SketchPlugin_SketchEntity

8 years ago#1151 distance on preselected entity
nds [Mon, 21 Dec 2015 11:58:49 +0000 (14:58 +0300)]
#1151 distance on preselected entity

8 years agoImprovement #1140: Display of replicated Sketch entities with thinner line
dbv [Mon, 21 Dec 2015 11:54:15 +0000 (14:54 +0300)]
Improvement #1140: Display of replicated Sketch entities with thinner line

8 years ago#1141 Part is not deleted
nds [Mon, 21 Dec 2015 10:33:25 +0000 (13:33 +0300)]
#1141 Part is not deleted

8 years agoFix issue #1127: parameter is not created
spo [Mon, 21 Dec 2015 08:54:59 +0000 (11:54 +0300)]
Fix issue #1127: parameter is not created

8 years agoFix for the issue #1103
mpv [Mon, 21 Dec 2015 08:46:09 +0000 (11:46 +0300)]
Fix for the issue #1103

8 years agoFirst part of the test correction for improvement: 2D points selection in multi-trans...
nds [Mon, 21 Dec 2015 08:28:50 +0000 (11:28 +0300)]
First part of the test correction for improvement: 2D points selection in multi-translation/rotation : multi-translation: using ModelAPI_AttributeRefAttr instead of GeomDataAPI_Point2D

8 years agoMinor updates in SketchSolver plugin
azv [Mon, 21 Dec 2015 05:41:57 +0000 (08:41 +0300)]
Minor updates in SketchSolver plugin

8 years ago2D points selection in multi-translation/rotation : multi-translation: using ModelAPI...
nds [Fri, 18 Dec 2015 18:07:40 +0000 (21:07 +0300)]
2D points selection in multi-translation/rotation : multi-translation: using ModelAPI_AttributeRefAttr instead of GeomDataAPI_Point2D

8 years agoTooltips update
dbv [Fri, 18 Dec 2015 14:13:11 +0000 (17:13 +0300)]
Tooltips update

8 years ago[PythonAPI] Remove the word shaper from some places in PythonAPI
spo [Fri, 18 Dec 2015 13:16:03 +0000 (16:16 +0300)]
[PythonAPI] Remove the word shaper from some places in PythonAPI

8 years agoDebug of CompSolid selection
vsv [Fri, 18 Dec 2015 13:03:35 +0000 (16:03 +0300)]
Debug of CompSolid selection

8 years ago[PythonAPI] For addAddition() feature make tool_objects parameter as optional
spo [Fri, 18 Dec 2015 12:56:11 +0000 (15:56 +0300)]
[PythonAPI] For addAddition() feature make tool_objects parameter as optional

8 years ago[PythonAPI] Rename startPointData()/endPointData() to startPoint()/endPoint()
spo [Fri, 18 Dec 2015 12:32:31 +0000 (15:32 +0300)]
[PythonAPI] Rename startPointData()/endPointData() to startPoint()/endPoint()

8 years agoAvoid dependency of SolveSpaceSolver module from SketchPlugin
azv [Fri, 18 Dec 2015 09:15:59 +0000 (12:15 +0300)]
Avoid dependency of SolveSpaceSolver module from SketchPlugin

8 years agoCorrect processing arcs in SketchSolver with SolveSpace (issue #1144)
azv [Fri, 18 Dec 2015 08:56:05 +0000 (11:56 +0300)]
Correct processing arcs in SketchSolver with SolveSpace (issue #1144)

8 years ago#1141 Part is not deleted
nds [Fri, 18 Dec 2015 08:35:01 +0000 (11:35 +0300)]
#1141 Part is not deleted

It was decided to perform Delete of Parts on the XGUI level. In the previous realization the RemoveFeature was used for this.
However, as the result of not loaded Parts do not exists and this feature are simple, it was decided with Mikhail, that this feature(Part) will be removed in the same way as other features. Later, it is possible, the RemoveFeature will be deleted from the application tool bar.

8 years agoFix suite_PYTHONAPI_SALOME/tst_Platine test
spo [Fri, 18 Dec 2015 08:12:20 +0000 (11:12 +0300)]
Fix suite_PYTHONAPI_SALOME/tst_Platine test

8 years agoUpdate for correct movement of sketch elements, when the sketch contains arcs and...
azv [Fri, 18 Dec 2015 05:16:30 +0000 (08:16 +0300)]
Update for correct movement of sketch elements, when the sketch contains arcs and coincidences.

8 years agoFix the problem with multi-coincidence of points (issue #1143)
azv [Wed, 16 Dec 2015 05:18:01 +0000 (08:18 +0300)]
Fix the problem with multi-coincidence of points (issue #1143)

8 years agoIt removes SketchShapePlugin from plugins
nds [Thu, 17 Dec 2015 15:38:31 +0000 (18:38 +0300)]
It removes SketchShapePlugin from plugins

First code for Status Bar.

8 years agoCorrection of selection for Comp Solids
vsv [Thu, 17 Dec 2015 15:22:34 +0000 (18:22 +0300)]
Correction of selection for Comp Solids

8 years agoFix for the issue #1129
mpv [Thu, 17 Dec 2015 15:17:46 +0000 (18:17 +0300)]
Fix for the issue #1129

8 years agoPartition naming fix.
dbv [Thu, 17 Dec 2015 14:49:56 +0000 (17:49 +0300)]
Partition naming fix.

8 years agoCorrection for: 1. crash by popup menu call on origin, 2. reentered presentation...
nds [Thu, 17 Dec 2015 14:47:42 +0000 (17:47 +0300)]
Correction for: 1. crash by popup menu call on origin, 2. reentered presentation(point) is visualized.

8 years agoAdd cases for modfication parameters in suite_PYTHONAPI_SALOME/tst_Platine
spo [Thu, 17 Dec 2015 14:35:33 +0000 (17:35 +0300)]
Add cases for modfication parameters in suite_PYTHONAPI_SALOME/tst_Platine

8 years agoAdd cases for modfication parameters in suite_PYTHONAPI_SALOME/tst_Platine
spo [Thu, 17 Dec 2015 14:34:22 +0000 (17:34 +0300)]
Add cases for modfication parameters in suite_PYTHONAPI_SALOME/tst_Platine

8 years agoAdd Platine unit test
spo [Thu, 17 Dec 2015 14:11:43 +0000 (17:11 +0300)]
Add Platine unit test

8 years agoActivate MakeBrick tests for PythonAPI
spo [Thu, 17 Dec 2015 14:07:50 +0000 (17:07 +0300)]
Activate MakeBrick tests for PythonAPI

8 years agoAdd SQSUIH test for Platine model created by PythonAPI
spo [Thu, 17 Dec 2015 13:55:08 +0000 (16:55 +0300)]
Add SQSUIH test for Platine model created by PythonAPI

8 years agoFix suite_FEATURE_REVOLUTION tests: difference in few pixels
spo [Thu, 17 Dec 2015 13:54:33 +0000 (16:54 +0300)]
Fix suite_FEATURE_REVOLUTION tests: difference in few pixels

8 years agoFix for the issue #469
mpv [Thu, 17 Dec 2015 13:29:10 +0000 (16:29 +0300)]
Fix for the issue #469

8 years agoError message correction for the following case, found by squish:
nds [Thu, 17 Dec 2015 13:19:27 +0000 (16:19 +0300)]
Error message correction for the following case, found by squish:

Create parameter a,
Create construction
Input 'a', 'Enter'
Input 'b', 'Enter' -> strange text in Property Panel tool tip.

8 years agoBug #1101: groups work wrong
dbv [Thu, 17 Dec 2015 12:55:50 +0000 (15:55 +0300)]
Bug #1101: groups work wrong

8 years ago#1136 - hidden axis are selected in sketch
nds [Thu, 17 Dec 2015 12:14:42 +0000 (15:14 +0300)]
#1136 - hidden axis are selected in sketch

8 years ago[PythonAPI] Add new model example: Platine.
spo [Thu, 17 Dec 2015 11:55:33 +0000 (14:55 +0300)]
[PythonAPI] Add new model example: Platine.

8 years ago[PythonAPI] Example Platine. Comlete version
spo [Thu, 17 Dec 2015 11:06:12 +0000 (14:06 +0300)]
[PythonAPI] Example Platine. Comlete version

8 years ago[PythonAPI] Add new example Platine. Draft version.
spo [Wed, 16 Dec 2015 08:44:17 +0000 (11:44 +0300)]
[PythonAPI] Add new example Platine. Draft version.

8 years ago[PythonAPI] Add return() to boolean feature
spo [Thu, 17 Dec 2015 10:59:10 +0000 (13:59 +0300)]
[PythonAPI] Add return() to boolean feature

8 years ago[PythonAPI] Add setExternal() to line feature.
spo [Thu, 17 Dec 2015 11:04:27 +0000 (14:04 +0300)]
[PythonAPI] Add setExternal() to line feature.

8 years ago[PythonAPI] Add to arc support of inversion.
spo [Thu, 17 Dec 2015 11:03:33 +0000 (14:03 +0300)]
[PythonAPI] Add to arc support of inversion.

8 years ago[PythonAPI] Improve tools.fill_attribute() for ModelAPI_AttributeString
spo [Wed, 16 Dec 2015 09:37:25 +0000 (12:37 +0300)]
[PythonAPI] Improve tools.fill_attribute() for ModelAPI_AttributeString

8 years ago[PythonAPI] Fix type error in tools.fill_attribute() for ModelAPI_AttributeRefAttr...
spo [Wed, 16 Dec 2015 08:42:22 +0000 (11:42 +0300)]
[PythonAPI] Fix type error in tools.fill_attribute() for ModelAPI_AttributeRefAttr section

8 years ago[PythonAPI] Fix fillet constraint to match the new interface
spo [Wed, 16 Dec 2015 08:40:35 +0000 (11:40 +0300)]
[PythonAPI] Fix fillet constraint to match the new interface

8 years ago[PythonAPI] Use _fillAttribute() in some sketch functions
spo [Wed, 16 Dec 2015 08:39:40 +0000 (11:39 +0300)]
[PythonAPI] Use _fillAttribute() in some sketch functions

8 years ago[PythonAPI] Add Entity class for sketch entity and make Line as an inheritant of...
spo [Wed, 16 Dec 2015 08:36:53 +0000 (11:36 +0300)]
[PythonAPI] Add Entity class for sketch entity and make Line as an inheritant of Entity

8 years ago[PythonAPI] Fix error in defaultPlane() for XOZ
spo [Wed, 16 Dec 2015 08:34:24 +0000 (11:34 +0300)]
[PythonAPI] Fix error in defaultPlane() for XOZ

8 years ago[PythonAPI] Fix error in parameter wrapper
spo [Wed, 16 Dec 2015 08:33:20 +0000 (11:33 +0300)]
[PythonAPI] Fix error in parameter wrapper

8 years ago[PythonAPI] Remove module modeler which remains after merging with PythonAPI branch
spo [Wed, 16 Dec 2015 08:43:27 +0000 (11:43 +0300)]
[PythonAPI] Remove module modeler which remains after merging with PythonAPI branch

8 years agoSpell-checking and space removing
spo [Wed, 16 Dec 2015 08:29:52 +0000 (11:29 +0300)]
Spell-checking and space removing

8 years agoFix test Test1064.py: For using GeomAPI classes you should import GeomAPI module.
spo [Thu, 17 Dec 2015 11:42:51 +0000 (14:42 +0300)]
Fix test Test1064.py: For using GeomAPI classes you should import GeomAPI module.

8 years agoImprove SWIG compilation: eliminate types duplication.
spo [Tue, 15 Dec 2015 11:04:24 +0000 (14:04 +0300)]
Improve SWIG compilation: eliminate types duplication.

8 years agoFix crash in model when create fillet from a script in GUI.
spo [Wed, 16 Dec 2015 08:28:46 +0000 (11:28 +0300)]
Fix crash in model when create fillet from a script in GUI.

8 years ago#1136 - hidden axis are selected in sketch
nds [Thu, 17 Dec 2015 11:39:23 +0000 (14:39 +0300)]
#1136 - hidden axis are selected in sketch

8 years agoFix for the issue #1045
mpv [Thu, 17 Dec 2015 09:30:17 +0000 (12:30 +0300)]
Fix for the issue #1045

8 years agoSolveSpaceSolver: do not update IDs of sub-entities for the Multi constraints
azv [Thu, 17 Dec 2015 07:04:13 +0000 (10:04 +0300)]
SolveSpaceSolver: do not update IDs of sub-entities for the Multi constraints

8 years agoFix for the issue #1051
mpv [Wed, 16 Dec 2015 15:43:45 +0000 (18:43 +0300)]
Fix for the issue #1051

8 years agoMerge branch 'Dev_2.1.0' of salome:modules/shaper into Dev_2.1.0
mpv [Wed, 16 Dec 2015 14:59:46 +0000 (17:59 +0300)]
Merge branch 'Dev_2.1.0' of salome:modules/shaper into Dev_2.1.0

8 years agoFor the issue #1051: make the model able to be opened and parameters modifiable witho...
mpv [Wed, 16 Dec 2015 14:59:20 +0000 (17:59 +0300)]
For the issue #1051: make the model able to be opened and parameters modifiable without the hang up to the application in the infinity loop.

8 years agoIssue #1137: Provide selection filter for fillet feature
vsv [Wed, 16 Dec 2015 14:58:53 +0000 (17:58 +0300)]
Issue #1137: Provide selection filter for fillet feature

8 years agoIssue #1134:Delete macro feature even its execution is failed.
vsv [Wed, 16 Dec 2015 14:00:11 +0000 (17:00 +0300)]
Issue #1134:Delete macro feature even its execution is failed.