]> SALOME platform Git repositories - modules/shaper.git/log
Salome HOME
modules/shaper.git
8 years agoFix for crash on changing of creation modes or already created arc
mpv [Thu, 23 Jun 2016 16:36:39 +0000 (19:36 +0300)]
Fix for crash on changing of creation modes or already created arc

8 years ago#1581 crash when create fillet
nds [Thu, 23 Jun 2016 16:18:54 +0000 (19:18 +0300)]
#1581 crash when create fillet

8 years ago#1549 Remove sub-shapes: wrong faces removed.
nds [Thu, 23 Jun 2016 13:27:04 +0000 (16:27 +0300)]
#1549 Remove sub-shapes: wrong faces removed.

SetSelected should be called for each owner only one time for correct work.
Another case: create compsolid, create group, select a solid, Apply, Edit of the created group. Activate control -> it is not deselect the object.

8 years agoTool tip correction in placement
nds [Thu, 23 Jun 2016 11:50:56 +0000 (14:50 +0300)]
Tool tip correction in placement

8 years agoCorrection for XAO, improvement for types of exported objects and axis created by...
nds [Thu, 23 Jun 2016 11:42:49 +0000 (14:42 +0300)]
Correction for XAO, improvement for types of exported objects and axis created by face.

8 years agoFix compilation on Linux
azv [Thu, 23 Jun 2016 11:13:55 +0000 (14:13 +0300)]
Fix compilation on Linux

8 years agoImprove removing point-point coincidence (issue #1548)
azv [Thu, 23 Jun 2016 10:52:24 +0000 (13:52 +0300)]
Improve removing point-point coincidence (issue #1548)

8 years agoCorrection for circle to hide AIS object when result is set. isFeatureValue should...
nds [Thu, 23 Jun 2016 06:34:22 +0000 (09:34 +0300)]
Correction for circle to hide AIS object when result is set. isFeatureValue should not check 1st/2nd/3rd points in Circle by center mode.

8 years agoIssue #1502 Select sub-solids in viewer : Compsolid shape selection type should be...
nds [Thu, 23 Jun 2016 10:21:08 +0000 (13:21 +0300)]
Issue #1502 Select sub-solids in viewer : Compsolid shape selection type should be defined in XML directly.

8 years agoUpdate config.sh
spo [Thu, 23 Jun 2016 09:41:49 +0000 (12:41 +0300)]
Update config.sh

8 years agoIssue #1502 Select sub-solids in viewer : set selection priority for the owner less...
nds [Thu, 23 Jun 2016 09:05:29 +0000 (12:05 +0300)]
Issue #1502 Select sub-solids in viewer : set selection priority for the owner less than for the sub-object.

8 years agoFix cmake error with LibXml2
spo [Thu, 23 Jun 2016 08:12:58 +0000 (11:12 +0300)]
Fix cmake error with LibXml2

8 years agoCorrect calculation of DoF for the "multi" constraints
azv [Thu, 23 Jun 2016 07:13:04 +0000 (10:13 +0300)]
Correct calculation of DoF for the "multi" constraints

8 years agoFix tests fot ExchangePlugin
spo [Thu, 23 Jun 2016 06:40:10 +0000 (09:40 +0300)]
Fix tests fot ExchangePlugin

8 years agoRename "Start point" to "Tangent point" for tangent arc (issue #1291)
azv [Thu, 23 Jun 2016 05:11:49 +0000 (08:11 +0300)]
Rename "Start point" to "Tangent point" for tangent arc (issue #1291)

8 years agoPLaneGCSSolver: Remove the Equal constraints from the list of redundant
azv [Thu, 23 Jun 2016 05:08:20 +0000 (08:08 +0300)]
PLaneGCSSolver: Remove the Equal constraints from the list of redundant

8 years agoSelection correction for "objects" type defined in XML. It is not possible to use...
nds [Wed, 22 Jun 2016 14:54:44 +0000 (17:54 +0300)]
Selection correction for "objects" type defined in XML. It is not possible to use TopAbs_SHAPE mode as '0' can't be combined with other selection modes. Compound is also reserved in NewGeom for shape with the compound shape type. As a result, additional selection mode is implemented. Later the new selection mode should be united somewhere with custom selection modes defined in SketcherPrs package.

8 years agoChanged highlight presentation of vertices
dbv [Wed, 22 Jun 2016 14:48:48 +0000 (17:48 +0300)]
Changed highlight presentation of vertices

8 years agoFix for the import XAO unit test
mpv [Wed, 22 Jun 2016 14:55:58 +0000 (17:55 +0300)]
Fix for the import XAO unit test

8 years agoReplace symlinks with files
spo [Wed, 22 Jun 2016 13:18:54 +0000 (16:18 +0300)]
Replace symlinks with files

8 years agoUse high API for testing Export freature
spo [Wed, 22 Jun 2016 13:04:07 +0000 (16:04 +0300)]
Use high API for testing Export freature

8 years agoAdd CPPHighAPI for export to XAO
spo [Wed, 22 Jun 2016 13:03:10 +0000 (16:03 +0300)]
Add CPPHighAPI for export to XAO

8 years agoFix ExchangePlugin/Test/Data/Box_1.brep
spo [Wed, 22 Jun 2016 11:43:32 +0000 (14:43 +0300)]
Fix ExchangePlugin/Test/Data/Box_1.brep

8 years agoExchangePlugin uses selectionType() like face, solid instead of Faces, Solids...
spo [Wed, 22 Jun 2016 11:31:53 +0000 (14:31 +0300)]
ExchangePlugin uses selectionType() like face, solid instead of Faces, Solids...

8 years agoFix for #1587 : in second study sometimes "salome" package study is not initialized...
mpv [Wed, 22 Jun 2016 11:31:08 +0000 (14:31 +0300)]
Fix for #1587 : in second study sometimes "salome" package study is not initialized, but called by Export to GEOM method

8 years agoDisable XAO import test
spo [Wed, 22 Jun 2016 11:03:49 +0000 (14:03 +0300)]
Disable XAO import test

8 years agoAdd XAO tests
spo [Wed, 22 Jun 2016 09:19:32 +0000 (12:19 +0300)]
Add XAO tests

8 years agoMake sub-group features presented correctly in he tree
mpv [Tue, 21 Jun 2016 08:59:43 +0000 (11:59 +0300)]
Make sub-group features presented correctly in he tree

8 years agoFix compilation
spo [Tue, 21 Jun 2016 10:58:33 +0000 (13:58 +0300)]
Fix compilation

8 years agoMake ExchangePlugin_ImportFeature a CompositeFeature
spo [Tue, 21 Jun 2016 10:55:59 +0000 (13:55 +0300)]
Make ExchangePlugin_ImportFeature a CompositeFeature

8 years agoHide groups in the history for importing XAO
spo [Fri, 4 Dec 2015 09:51:46 +0000 (12:51 +0300)]
Hide groups in the history for importing XAO

8 years agoAdd SQUISH test for export/import XAO
spo [Fri, 4 Dec 2015 08:01:08 +0000 (11:01 +0300)]
Add SQUISH test for export/import XAO

8 years agoAdd data for testing XAO
spo [Thu, 3 Dec 2015 11:06:09 +0000 (14:06 +0300)]
Add data for testing XAO

8 years agoAdd group name attribute for export
spo [Mon, 30 Nov 2015 13:21:49 +0000 (16:21 +0300)]
Add group name attribute for export

8 years agoMake export XAO with groups
spo [Mon, 30 Nov 2015 13:10:03 +0000 (16:10 +0300)]
Make export XAO with groups

8 years agoMake XAO export
spo [Fri, 27 Nov 2015 13:31:17 +0000 (16:31 +0300)]
Make XAO export

8 years agoImprove XAO import: group_list
spo [Fri, 27 Nov 2015 10:29:27 +0000 (13:29 +0300)]
Improve XAO import: group_list

8 years agoMake import XAO with groups
spo [Thu, 26 Nov 2015 10:27:27 +0000 (13:27 +0300)]
Make import XAO with groups

8 years agoAdd Model_AttributeSelection::setId()
spo [Wed, 25 Nov 2015 10:41:24 +0000 (13:41 +0300)]
Add Model_AttributeSelection::setId()

8 years agoImprove .gitignore
spo [Wed, 25 Nov 2015 09:02:47 +0000 (13:02 +0400)]
Improve .gitignore

8 years agoAdd XAO format to ExchangePlugin XML
spo [Wed, 25 Nov 2015 08:11:28 +0000 (11:11 +0300)]
Add XAO format to ExchangePlugin XML

8 years agoMake XAO compilation
spo [Tue, 24 Nov 2015 12:15:23 +0000 (15:15 +0300)]
Make XAO compilation

8 years agoCopy XAO library source code from GEOM
spo [Tue, 24 Nov 2015 05:08:31 +0000 (08:08 +0300)]
Copy XAO library source code from GEOM

8 years agoPlaneGCSSolver: It is necessary to calculate parameters of fixed arc to avoid conflic...
azv [Wed, 22 Jun 2016 10:10:47 +0000 (13:10 +0300)]
PlaneGCSSolver: It is necessary to calculate parameters of fixed arc to avoid conflicts (issue #1584)

8 years agoAvoid too much recalculations of DoF while moving feature
azv [Wed, 22 Jun 2016 09:07:14 +0000 (12:07 +0300)]
Avoid too much recalculations of DoF while moving feature

8 years agoArc problems fixing: 1. reentrant of the tangent arc should not fill center point...
nds [Wed, 22 Jun 2016 08:19:19 +0000 (11:19 +0300)]
Arc problems fixing: 1. reentrant of the tangent arc should not fill center point before start arc point(problem is reproduced on several sketch point entities created)

2. Issue #1578 arc problems (constraint to passed point of existing arc in sketch which is not in the case of the arc)

8 years agoUnpressing the button of the current action must behave like a validation if the...
nds [Wed, 22 Jun 2016 06:16:02 +0000 (09:16 +0300)]
Unpressing the button of the current action must behave like a validation if the entity can be created (instead of Cancel, as currently)

8 years agoIssue #1560: Updated validator for extrusion direction. Not it is not allow to select...
dbv [Wed, 22 Jun 2016 08:10:37 +0000 (11:10 +0300)]
Issue #1560: Updated validator for extrusion direction. Not it is not allow to select direction parallel to selected faces or sketches.

8 years agoFix SIGSEGV in Mirror constraint (issue #1585)
azv [Wed, 22 Jun 2016 07:54:35 +0000 (10:54 +0300)]
Fix SIGSEGV in Mirror constraint (issue #1585)

8 years agoInitialize necessary attributes of external arc (issue #1580)
azv [Wed, 22 Jun 2016 06:13:10 +0000 (09:13 +0300)]
Initialize necessary attributes of external arc (issue #1580)

8 years agoUse SALOME 7.8.0 with patches for OCCT for Debian
spo [Wed, 22 Jun 2016 06:09:30 +0000 (09:09 +0300)]
Use SALOME 7.8.0 with patches for OCCT for Debian

8 years agoVisualize default sketcher planes if a shown sketch does not contain faces.
nds [Wed, 22 Jun 2016 04:26:53 +0000 (07:26 +0300)]
Visualize default sketcher planes if a shown sketch does not contain faces.

8 years agoIssue #1578: arc problems
azv [Tue, 21 Jun 2016 14:14:16 +0000 (17:14 +0300)]
Issue #1578: arc problems

* Do not treat as a redundant the PlaneGCS's Equal constraint
* Do not put into SketchSolver_Storage features, which are copies in Multi-Rotation or Multi-Translation constraint (performance optimization)

8 years agoSelection priority in Sketch, clear selection when sketch goes from entity to neutral...
nds [Tue, 21 Jun 2016 13:32:01 +0000 (16:32 +0300)]
Selection priority in Sketch, clear selection when sketch goes from entity to neutral point, #1349 selection with SHIFT correction, selection synchronization correction for no select in neutral point.

8 years agoUse SALOME 7.8.0 with patches for OCCT
spo [Tue, 21 Jun 2016 12:48:11 +0000 (15:48 +0300)]
Use SALOME 7.8.0 with patches for OCCT

8 years agoDisabled test case for pipe with bi-normal
dbv [Tue, 21 Jun 2016 12:27:39 +0000 (15:27 +0300)]
Disabled test case for pipe with bi-normal

8 years agoDisabled ts files update
dbv [Tue, 21 Jun 2016 12:26:38 +0000 (15:26 +0300)]
Disabled ts files update

8 years agoIssue #1366: Added test cases for "Union" and "Remove Sub-Shapes" features.
dbv [Tue, 21 Jun 2016 12:16:25 +0000 (15:16 +0300)]
Issue #1366: Added test cases for "Union" and "Remove Sub-Shapes" features.

8 years agoIssue #1366: Added Union feature
dbv [Mon, 20 Jun 2016 12:08:14 +0000 (15:08 +0300)]
Issue #1366: Added Union feature

8 years agoCorrection for compsolid results in remove.
nds [Tue, 21 Jun 2016 12:00:16 +0000 (15:00 +0300)]
Correction for compsolid results in remove.

Wrong scenario: create Extrusion(Sketch with two circle that have common area), create Group, Select Face mode, Select common part, Apply, Extrusion->Delete. Warning does not appear about dependency of Group to this Extrusion

8 years agoDisabled test for Pipe by locations
dbv [Mon, 20 Jun 2016 12:42:10 +0000 (15:42 +0300)]
Disabled test for Pipe by locations

8 years agoRemove dependency on boost
spo [Mon, 20 Jun 2016 11:52:33 +0000 (14:52 +0300)]
Remove dependency on boost

8 years agoFix TestFeaturesRevolution
spo [Mon, 20 Jun 2016 11:06:51 +0000 (14:06 +0300)]
Fix TestFeaturesRevolution

8 years agoFix tests
spo [Mon, 20 Jun 2016 10:45:43 +0000 (13:45 +0300)]
Fix tests

8 years agoMerge branch 'CPPHighAPI'
spo [Fri, 17 Jun 2016 16:36:01 +0000 (19:36 +0300)]
Merge branch 'CPPHighAPI'

8 years agoMove functions from Python model.services to C++ ModelHighAPI_Services CPPHighAPI
spo [Fri, 17 Jun 2016 16:34:34 +0000 (19:34 +0300)]
Move functions from Python model.services to C++ ModelHighAPI_Services

8 years agoRemove some TODOs
spo [Fri, 17 Jun 2016 15:41:43 +0000 (18:41 +0300)]
Remove some TODOs

8 years agoRename setRigid to setFixed for C++HighAPI
spo [Fri, 17 Jun 2016 15:30:42 +0000 (18:30 +0300)]
Rename setRigid to setFixed for C++HighAPI

8 years agoRemove GTest tests for C++ High API
spo [Fri, 17 Jun 2016 14:53:44 +0000 (17:53 +0300)]
Remove GTest tests for C++ High API

8 years agoRemove PythonAPI implementation
spo [Fri, 17 Jun 2016 14:43:11 +0000 (17:43 +0300)]
Remove PythonAPI implementation

8 years agoFix Platine test
spo [Fri, 17 Jun 2016 11:49:44 +0000 (14:49 +0300)]
Fix Platine test

8 years agoFix model.services.defaultPlane()
spo [Fri, 17 Jun 2016 11:48:31 +0000 (14:48 +0300)]
Fix model.services.defaultPlane()

8 years agoFix ParametersAPI
spo [Fri, 17 Jun 2016 11:48:00 +0000 (14:48 +0300)]
Fix ParametersAPI

8 years agoUse Events_InfoMessage instead of Events_Error in ModelHighAPI_Interface
spo [Fri, 17 Jun 2016 11:40:41 +0000 (14:40 +0300)]
Use Events_InfoMessage instead of Events_Error in ModelHighAPI_Interface

8 years agoAdded CPP High API for BuildPlugin_SubShapes
dbv [Fri, 17 Jun 2016 07:28:32 +0000 (10:28 +0300)]
Added CPP High API for BuildPlugin_SubShapes

8 years agoAdded CPP High API for BuildPlugin_Shell
dbv [Thu, 16 Jun 2016 15:52:02 +0000 (18:52 +0300)]
Added CPP High API for BuildPlugin_Shell

8 years agoAdded CPP High API for BuildPlugin_Face
dbv [Thu, 16 Jun 2016 15:29:40 +0000 (18:29 +0300)]
Added CPP High API for BuildPlugin_Face

8 years agoAdded CPP High API for BuildPlugin_Wire
dbv [Thu, 16 Jun 2016 15:22:11 +0000 (18:22 +0300)]
Added CPP High API for BuildPlugin_Wire

8 years agoAdded CPP High API for BuildPlugin_Edge
dbv [Thu, 16 Jun 2016 15:07:31 +0000 (18:07 +0300)]
Added CPP High API for BuildPlugin_Edge

8 years agoAdded CPP High API for BuildPlugin_Vertex
dbv [Thu, 16 Jun 2016 15:03:28 +0000 (18:03 +0300)]
Added CPP High API for BuildPlugin_Vertex

8 years agoAdded CPP High API for FeaturesPlugin_RemoveSubShapes
dbv [Thu, 16 Jun 2016 14:37:34 +0000 (17:37 +0300)]
Added CPP High API for FeaturesPlugin_RemoveSubShapes

8 years agoAdded CPP High API for FeaturesPlugin_Intersection
dbv [Thu, 16 Jun 2016 13:59:57 +0000 (16:59 +0300)]
Added CPP High API for FeaturesPlugin_Intersection

8 years agoAdded CPP High API for FeaturesPlugin_Partition
dbv [Thu, 16 Jun 2016 13:35:57 +0000 (16:35 +0300)]
Added CPP High API for FeaturesPlugin_Partition

8 years agoAdded CPP High API for FeaturesPlugin_Pipe
dbv [Thu, 16 Jun 2016 13:21:29 +0000 (16:21 +0300)]
Added CPP High API for FeaturesPlugin_Pipe

8 years agoAdd ConnectorAPI
spo [Thu, 16 Jun 2016 13:51:57 +0000 (16:51 +0300)]
Add ConnectorAPI

8 years agoAdd ParametersAPI
spo [Thu, 16 Jun 2016 13:28:38 +0000 (16:28 +0300)]
Add ParametersAPI

8 years agoAdd PartSetAPI
spo [Thu, 16 Jun 2016 13:10:18 +0000 (16:10 +0300)]
Add PartSetAPI

8 years agoAdded CPP High API for FeaturesPlugin_RevolutionCut, FeaturesPlugin_RevolutionFuse
dbv [Thu, 16 Jun 2016 12:29:59 +0000 (15:29 +0300)]
Added CPP High API for FeaturesPlugin_RevolutionCut, FeaturesPlugin_RevolutionFuse

8 years agoAdd Rectangle
spo [Thu, 16 Jun 2016 12:08:35 +0000 (15:08 +0300)]
Add Rectangle

8 years agoAdd Projection to SketchAPI_Sketch
spo [Thu, 16 Jun 2016 11:38:17 +0000 (14:38 +0300)]
Add Projection to SketchAPI_Sketch

8 years agoaddIntersectionPoint for SketchAPI_Sketch
spo [Thu, 16 Jun 2016 11:37:06 +0000 (14:37 +0300)]
addIntersectionPoint for SketchAPI_Sketch

8 years agoAdded CPP High API for FeaturesPlugin_ExtrusionCut, FeaturesPlugin_ExtrusionFuse
dbv [Thu, 16 Jun 2016 11:11:21 +0000 (14:11 +0300)]
Added CPP High API for FeaturesPlugin_ExtrusionCut, FeaturesPlugin_ExtrusionFuse

8 years agoAdd IntersectionPoint
spo [Thu, 16 Jun 2016 11:10:24 +0000 (14:10 +0300)]
Add IntersectionPoint

8 years agoAdd Rotation
spo [Thu, 16 Jun 2016 09:51:34 +0000 (12:51 +0300)]
Add Rotation

8 years agoAdd Translation
spo [Thu, 16 Jun 2016 09:36:03 +0000 (12:36 +0300)]
Add Translation

8 years agoAdd Mirror and fix tests
spo [Thu, 16 Jun 2016 09:00:17 +0000 (12:00 +0300)]
Add Mirror and fix tests

8 years agoFix tests Radius and Tangemt. Radios does not work.
spo [Wed, 15 Jun 2016 14:39:51 +0000 (17:39 +0300)]
Fix tests Radius and Tangemt. Radios does not work.

8 years agoAdd setAngle, setCollinear, setEqual, setMiddlePoint, setRadius, setTangent
spo [Wed, 15 Jun 2016 14:19:06 +0000 (17:19 +0300)]
Add setAngle, setCollinear, setEqual, setMiddlePoint, setRadius, setTangent

8 years agoFixed PythonAPI tests
dbv [Wed, 15 Jun 2016 14:12:06 +0000 (17:12 +0300)]
Fixed PythonAPI tests

8 years agoFix return ModelHighAPI_Selection from list as a copy
spo [Wed, 15 Jun 2016 14:03:23 +0000 (17:03 +0300)]
Fix return ModelHighAPI_Selection from list as a copy