]> SALOME platform Git repositories - modules/shaper.git/log
Salome HOME
modules/shaper.git
8 years agoIssue #1550 crash in sketcher: correction for Sketch_3 cycling: edit sketch, select...
nds [Wed, 15 Jun 2016 10:19:22 +0000 (13:19 +0300)]
Issue #1550 crash in sketcher: correction for Sketch_3 cycling: edit sketch, select circle center, call detach from point.

8 years agoFix for the issue #1156 : update all sub-elements before execution of this, even...
mpv [Wed, 15 Jun 2016 08:36:16 +0000 (11:36 +0300)]
Fix for the issue #1156 : update all sub-elements before execution of this, even sub-elements become modified during processing of other sub-elements

8 years agoIncorrect conflict constraint in PlaneGCSSolver
azv [Wed, 15 Jun 2016 08:26:45 +0000 (11:26 +0300)]
Incorrect conflict constraint in PlaneGCSSolver

8 years agoFix for the issue #1555: Problem in edition of the sketch in ExtrusionCut
mpv [Wed, 15 Jun 2016 06:50:17 +0000 (09:50 +0300)]
Fix for the issue #1555: Problem in edition of the sketch in ExtrusionCut

8 years agoDon't send any update on temporary set/reset. Fix for the fillets with shift creation.
mpv [Tue, 14 Jun 2016 09:50:04 +0000 (12:50 +0300)]
Don't send any update on temporary set/reset. Fix for the fillets with shift creation.

8 years agoOptimization of circle and arc creation
mpv [Tue, 14 Jun 2016 09:25:37 +0000 (12:25 +0300)]
Optimization of circle and arc creation

8 years agoTranslation of Features plug-in
vsv [Fri, 10 Jun 2016 10:39:56 +0000 (13:39 +0300)]
Translation of Features plug-in

8 years agoTranslate Placement operation
vsv [Fri, 10 Jun 2016 10:18:51 +0000 (13:18 +0300)]
Translate Placement operation

8 years agoTranslation of operations
vsv [Fri, 10 Jun 2016 10:02:46 +0000 (13:02 +0300)]
Translation of operations

8 years agoColor correction of conflicting coincidence constraint. Scenario for conflicting...
nds [Fri, 10 Jun 2016 06:50:28 +0000 (09:50 +0300)]
Color correction of conflicting coincidence constraint. Scenario for conflicting coincidence constraint: two parallel lines, distance between a point on 1st line and the 2nd line. Create point, which coincident to both lines.

8 years agoConflicting coincidence constraint is visualized in black color.
nds [Tue, 7 Jun 2016 05:56:59 +0000 (08:56 +0300)]
Conflicting coincidence constraint is visualized in black color.

8 years agoShow conflicting constraints when fixing constrained entity
azv [Fri, 10 Jun 2016 05:51:14 +0000 (08:51 +0300)]
Show conflicting constraints when fixing constrained entity

8 years agoFix blinking of the tangency arc
azv [Fri, 10 Jun 2016 04:52:47 +0000 (07:52 +0300)]
Fix blinking of the tangency arc

8 years agoSend CREATED event when building tangent arc (issue #1291)
azv [Fri, 10 Jun 2016 04:10:28 +0000 (07:10 +0300)]
Send CREATED event when building tangent arc (issue #1291)

8 years agoPlaneGCS: fix incorrect range of fillet arc on the XZ plane
azv [Thu, 9 Jun 2016 14:15:36 +0000 (17:15 +0300)]
PlaneGCS: fix incorrect range of fillet arc on the XZ plane

8 years agoPlaneGCS: conflicting constraints after abort
azv [Thu, 9 Jun 2016 12:20:46 +0000 (15:20 +0300)]
PlaneGCS: conflicting constraints after abort

8 years agoInconsistency constraint maintenance (issue #1558)
azv [Thu, 9 Jun 2016 10:19:26 +0000 (13:19 +0300)]
Inconsistency constraint maintenance (issue #1558)

8 years agoRemove obsolete code in Mirror constraint
azv [Wed, 8 Jun 2016 13:58:55 +0000 (16:58 +0300)]
Remove obsolete code in Mirror constraint

8 years agoFix compilation error on Linux
azv [Wed, 8 Jun 2016 13:28:55 +0000 (16:28 +0300)]
Fix compilation error on Linux

8 years agoEliminate instability in Platine test case
azv [Wed, 8 Jun 2016 13:10:29 +0000 (16:10 +0300)]
Eliminate instability in Platine test case

8 years agoStable search of start vertex in SketchBuilder
azv [Wed, 8 Jun 2016 12:40:07 +0000 (15:40 +0300)]
Stable search of start vertex in SketchBuilder

8 years agoPlaneGCSSolver: Update processing coincident points. Test cases correction.
azv [Wed, 8 Jun 2016 11:29:15 +0000 (14:29 +0300)]
PlaneGCSSolver: Update processing coincident points. Test cases correction.

8 years agoPlaneGCS: Some incorrect conflicts fixed:
azv [Wed, 8 Jun 2016 07:28:29 +0000 (10:28 +0300)]
PlaneGCS: Some incorrect conflicts fixed:

* Resolve system one again if there are redundant tangent constraints.
* Do not add redundant point-point coincidence constraint if multiple points are coincident.

8 years agoFix incorrect movement of horizontal line connected to a sketch point
azv [Tue, 7 Jun 2016 15:48:58 +0000 (18:48 +0300)]
Fix incorrect movement of horizontal line connected to a sketch point

8 years agoPlaneGCSSolver: workaround for wrong redundant constraints available on arc-line...
azv [Tue, 7 Jun 2016 15:29:50 +0000 (18:29 +0300)]
PlaneGCSSolver: workaround for wrong redundant constraints available on arc-line tangency which are smoothly connected

8 years agoAvoid the ""Conflicting constraints" message on constraint Mirror
azv [Tue, 7 Jun 2016 11:14:12 +0000 (14:14 +0300)]
Avoid the ""Conflicting constraints" message on constraint Mirror

8 years agoCorrect compilation errors
vsv [Tue, 7 Jun 2016 15:40:48 +0000 (18:40 +0300)]
Correct compilation errors

8 years agoCorrect compilation errors
vsv [Tue, 7 Jun 2016 15:35:15 +0000 (18:35 +0300)]
Correct compilation errors

8 years agoCorrect compilation error
vsv [Tue, 7 Jun 2016 15:25:19 +0000 (18:25 +0300)]
Correct compilation error

8 years agoCorrect compilation errors
vsv [Tue, 7 Jun 2016 14:39:32 +0000 (17:39 +0300)]
Correct compilation errors

8 years agoTranslation of sketch operations
vsv [Tue, 7 Jun 2016 13:22:59 +0000 (16:22 +0300)]
Translation of sketch operations

8 years agoUpdated translation files
vsv [Tue, 7 Jun 2016 09:31:39 +0000 (12:31 +0300)]
Updated translation files

8 years agoMerge branch 'BR_internationalization'
vsv [Tue, 7 Jun 2016 09:31:09 +0000 (12:31 +0300)]
Merge branch 'BR_internationalization'

Conflicts:
src/Model/Model_SelectionNaming.cpp
src/ModuleBase/ModuleBase_Tools.cpp

8 years agoAdditional check redundant constraints in PlaneGCS to show the "Conflicting constrain...
azv [Tue, 7 Jun 2016 05:29:53 +0000 (08:29 +0300)]
Additional check redundant constraints in PlaneGCS to show the "Conflicting constraints" message

8 years agoTranslate strings with corresponded codec BR_internationalization
vsv [Mon, 6 Jun 2016 16:32:37 +0000 (19:32 +0300)]
Translate strings with corresponded codec

8 years agoExclude Events_Error class from the project
vsv [Mon, 6 Jun 2016 15:00:40 +0000 (18:00 +0300)]
Exclude Events_Error class from the project

8 years agoMerge branch 'master' of salome:modules/shaper
mpv [Mon, 6 Jun 2016 13:55:22 +0000 (16:55 +0300)]
Merge branch 'master' of salome:modules/shaper

8 years agoMinor changes and optimization
mpv [Mon, 6 Jun 2016 13:54:56 +0000 (16:54 +0300)]
Minor changes and optimization

8 years agoReplace of Events_Error by Events_InfoMessage. Provide storing of non translated...
vsv [Mon, 6 Jun 2016 12:56:57 +0000 (15:56 +0300)]
Replace of Events_Error by Events_InfoMessage. Provide storing of non translated strings

8 years agoCorrection for selector(greed) widgets. Using preselection.
nds [Mon, 6 Jun 2016 06:27:41 +0000 (09:27 +0300)]
Correction for selector(greed) widgets. Using preselection.

8 years agoSend information message for translation
vsv [Fri, 3 Jun 2016 16:30:32 +0000 (19:30 +0300)]
Send information message for translation

8 years agoDefault solver is PlaneGCS.
nds [Fri, 3 Jun 2016 12:50:54 +0000 (15:50 +0300)]
Default solver is PlaneGCS.

8 years agoImprovement for key "Delete" processing: should be done only on possible objects...
nds [Fri, 3 Jun 2016 11:39:03 +0000 (14:39 +0300)]
Improvement for key "Delete" processing: should be done only on possible objects of delete action[where action "Delete" in popup menu is enabled]

Also possible show of two warnings is united in one warning: the first is about not loaded parts, the second is usual delete message.

8 years agoCorrection to do not show DOF message until plane of the sketch is not selected.
nds [Fri, 3 Jun 2016 06:53:54 +0000 (09:53 +0300)]
Correction to do not show DOF message until plane of the sketch is not selected.

8 years agoPrepare version 2.3.1 V_2.3.1
mpv [Thu, 2 Jun 2016 14:42:55 +0000 (17:42 +0300)]
Prepare version 2.3.1

8 years agoIncorrect conflict message appears
azv [Thu, 2 Jun 2016 13:51:10 +0000 (16:51 +0300)]
Incorrect conflict message appears

8 years agoRead translations
vsv [Thu, 2 Jun 2016 12:46:21 +0000 (15:46 +0300)]
Read translations

8 years agoIssue #1530 The arcs representation is not fine enough
nds [Thu, 2 Jun 2016 12:45:48 +0000 (15:45 +0300)]
Issue #1530 The arcs representation is not fine enough

8 years agoFix crash on tangent arc in SolveSpaceSolver
azv [Thu, 2 Jun 2016 12:20:33 +0000 (15:20 +0300)]
Fix crash on tangent arc in SolveSpaceSolver

8 years agoIssue #1530 The arcs representation is not fine enough
nds [Thu, 2 Jun 2016 12:01:19 +0000 (15:01 +0300)]
Issue #1530 The arcs representation is not fine enough

8 years agoFix crashes caused by PlaneGCSSolver connector (issue #1538)
azv [Thu, 2 Jun 2016 11:57:43 +0000 (14:57 +0300)]
Fix crashes caused by PlaneGCSSolver connector (issue #1538)

8 years agoAvoid conflicting constraints message when canceling sketch
azv [Thu, 2 Jun 2016 07:40:51 +0000 (10:40 +0300)]
Avoid conflicting constraints message when canceling sketch

8 years agoConflicting constraints when Translation (issue #1542)
azv [Thu, 2 Jun 2016 07:24:26 +0000 (10:24 +0300)]
Conflicting constraints when Translation (issue #1542)

8 years agoHidden constraints should not be shown by Replication operation start. Because it...
nds [Thu, 2 Jun 2016 06:38:33 +0000 (09:38 +0300)]
Hidden constraints should not be shown by Replication operation start. Because it is not a constraint.

8 years agoIssue #1535 crash when mirror: debug information
nds [Thu, 2 Jun 2016 06:11:53 +0000 (09:11 +0300)]
Issue #1535 crash when mirror: debug information

8 years agoIssue #1535 crash when mirror: debug information
nds [Thu, 2 Jun 2016 05:54:05 +0000 (08:54 +0300)]
Issue #1535 crash when mirror: debug information

8 years agoUpdate processing Mirror constraint
azv [Wed, 1 Jun 2016 13:34:59 +0000 (16:34 +0300)]
Update processing Mirror constraint

8 years agoFix for the issue #1538 (not reproduced after this)
mpv [Wed, 1 Jun 2016 12:17:04 +0000 (15:17 +0300)]
Fix for the issue #1538 (not reproduced after this)

8 years agoIssue #1525: Disable Ok button if parameters are not valid
vsv [Wed, 1 Jun 2016 12:13:31 +0000 (15:13 +0300)]
Issue #1525: Disable Ok button if parameters are not valid

8 years agoPLaneGCSSolver: It is not necessary to adjust Angle constraint (issue #1536)
azv [Wed, 1 Jun 2016 07:41:18 +0000 (10:41 +0300)]
PLaneGCSSolver: It is not necessary to adjust Angle constraint (issue #1536)

8 years agoDefine Translator
vsv [Wed, 1 Jun 2016 07:25:22 +0000 (10:25 +0300)]
Define Translator

8 years agoPlaneGCSSolver: update Angle constraint to be consistent with SketchPlugin_Constraint...
azv [Wed, 1 Jun 2016 07:25:21 +0000 (10:25 +0300)]
PlaneGCSSolver: update Angle constraint to be consistent with SketchPlugin_ConstraintAngle feature (issue #1536)

8 years agoPlace mirrored entities to correct group
azv [Wed, 1 Jun 2016 07:01:58 +0000 (10:01 +0300)]
Place mirrored entities to correct group

8 years agoDeselection of objects with SHIFT: debug information
nds [Wed, 1 Jun 2016 06:01:30 +0000 (09:01 +0300)]
Deselection of objects with SHIFT: debug information

8 years agoUpdate the path due to the location of resources changes
mpv [Tue, 31 May 2016 14:42:29 +0000 (17:42 +0300)]
Update the path due to the location of resources changes

8 years agoAdded unit test for the issue #1512
mpv [Tue, 31 May 2016 13:25:18 +0000 (16:25 +0300)]
Added unit test for the issue #1512

8 years agoFixed "Sub-Shapes" and "Remove Sub-Shapes" on pre-selection.
dbv [Tue, 31 May 2016 10:06:11 +0000 (13:06 +0300)]
Fixed "Sub-Shapes" and "Remove Sub-Shapes" on pre-selection.

8 years agoFixed "Sub-Shapes" and "Remove Sub-Shapes" on pre-selection.
dbv [Tue, 31 May 2016 09:54:27 +0000 (12:54 +0300)]
Fixed "Sub-Shapes" and "Remove Sub-Shapes" on pre-selection.

8 years agoIssue #1532: color of edges in 3D viewer: text correction
nds [Tue, 31 May 2016 06:07:47 +0000 (09:07 +0300)]
Issue #1532: color of edges in 3D viewer: text correction

8 years agoAvoid show for all dimensional/geometrical constraints on edit
nds [Tue, 31 May 2016 05:58:44 +0000 (08:58 +0300)]
Avoid show for all dimensional/geometrical constraints on edit

8 years agoRevert unsuitable changes in the Middle point constraint
azv [Tue, 31 May 2016 05:32:54 +0000 (08:32 +0300)]
Revert unsuitable changes in the Middle point constraint

8 years agoIssue #1517: Fixed extra segments selected by Wire / Add contour
dbv [Mon, 30 May 2016 16:12:49 +0000 (19:12 +0300)]
Issue #1517: Fixed extra segments selected by Wire / Add contour

8 years agoIssue #1515: Fixed face with hole creation.
dbv [Mon, 30 May 2016 15:58:44 +0000 (18:58 +0300)]
Issue #1515: Fixed face with hole creation.

8 years agoAllow Pipe on compounds with edges and faces.
dbv [Mon, 30 May 2016 14:18:27 +0000 (17:18 +0300)]
Allow Pipe on compounds with edges and faces.

8 years agoAllow Revolution on compounds with edges and faces.
dbv [Mon, 30 May 2016 12:32:56 +0000 (15:32 +0300)]
Allow Revolution on compounds with edges and faces.

8 years agoAllow Extrusion on compounds with edges and faces.
dbv [Fri, 27 May 2016 17:54:48 +0000 (20:54 +0300)]
Allow Extrusion on compounds with edges and faces.

8 years agoUnable to Undo incorrect constraints (issue #1523)
azv [Mon, 30 May 2016 14:58:47 +0000 (17:58 +0300)]
Unable to Undo incorrect constraints (issue #1523)

8 years agoIncorrect processing of middle point on line (issue #1511)
azv [Mon, 30 May 2016 14:09:47 +0000 (17:09 +0300)]
Incorrect processing of middle point on line (issue #1511)

8 years agoIssue #1514: Disable all items in non-active part document
vsv [Mon, 30 May 2016 09:37:56 +0000 (12:37 +0300)]
Issue #1514: Disable all items in non-active part document

8 years agoRemove error status when the group with conflicting constraint is deleted (issue...
azv [Mon, 30 May 2016 09:36:00 +0000 (12:36 +0300)]
Remove error status when the group with conflicting constraint is deleted (issue #1520)

8 years agoIssue #1525: Update parameters on edit of parameter name
vsv [Mon, 30 May 2016 09:03:00 +0000 (12:03 +0300)]
Issue #1525: Update parameters on edit of parameter name

8 years agoFix for the issue #1504 : parameter in Part may refer to any parameter in PartSet
mpv [Mon, 30 May 2016 08:06:35 +0000 (11:06 +0300)]
Fix for the issue #1504 : parameter in Part may refer to any parameter in PartSet

8 years agoIssue #1505 Bug in parameters management (with parts not loaded)
nds [Mon, 30 May 2016 07:52:44 +0000 (10:52 +0300)]
Issue #1505 Bug in parameters management (with parts not loaded)

Correction for point feature creation: a point in origin stays in the viewer without this modification.

8 years agoFix for the issue 1526: optimization of isConnectedTopology calls
mpv [Mon, 30 May 2016 07:32:51 +0000 (10:32 +0300)]
Fix for the issue 1526: optimization of isConnectedTopology calls

8 years agoPlaneGCS: Fix the problem regarding update of a distance during moving of a line...
azv [Mon, 30 May 2016 07:09:54 +0000 (10:09 +0300)]
PlaneGCS: Fix the problem regarding update of a distance during moving of a line (issue #1513)

8 years agoIssue #1505 Bug in parameters management (with parts not loaded)
nds [Mon, 30 May 2016 06:17:29 +0000 (09:17 +0300)]
Issue #1505 Bug in parameters management (with parts not loaded)

8 years agoIssue #1505 Bug in parameters management (with parts not loaded)
nds [Fri, 27 May 2016 14:58:32 +0000 (17:58 +0300)]
Issue #1505 Bug in parameters management (with parts not loaded)

8 years agoFix for Partition feature.
dbv [Fri, 27 May 2016 15:09:44 +0000 (18:09 +0300)]
Fix for Partition feature.

8 years agoIssue #1527:Do not disable remove button on input wrong name
vsv [Fri, 27 May 2016 14:53:02 +0000 (17:53 +0300)]
Issue #1527:Do not disable remove button on input wrong name

8 years agoFix of the crash on selection of edge of solid in the neutral point
mpv [Fri, 27 May 2016 14:04:44 +0000 (17:04 +0300)]
Fix of the crash on selection of edge of solid in the neutral point

8 years agoTranslation of GUI in plug-in
vsv [Fri, 27 May 2016 08:27:24 +0000 (11:27 +0300)]
Translation of GUI in plug-in

8 years agoIssue #1412: Activate selection mode FACES for sketcher only in operations with selector:
nds [Fri, 27 May 2016 08:00:25 +0000 (11:00 +0300)]
Issue #1412: Activate selection mode FACES for sketcher only in operations with selector:

correction for wrong case in Extrusion operation.
New custom selection modes(Face, Wire) are implemented in Sketch presentation which is switched on by module when corresponded standard modes are mentioned in XML. It is switched on/off when the Property panel widget control is activated.

8 years agoFix for the issue #1519: update of invalid features after enabling
mpv [Fri, 27 May 2016 07:31:20 +0000 (10:31 +0300)]
Fix for the issue #1519: update of invalid features after enabling

8 years agoIssue #1366: validator for Partition objects selection list.
dbv [Thu, 26 May 2016 16:33:06 +0000 (19:33 +0300)]
Issue #1366: validator for Partition objects selection list.

8 years agoValidator for Pipe path selection which disables local selection of wires.
dbv [Thu, 26 May 2016 15:16:08 +0000 (18:16 +0300)]
Validator for Pipe path selection which disables local selection of wires.

8 years agoclear_in_neutral_point set to false for Sketch/Fillet feature.
dbv [Thu, 26 May 2016 13:52:26 +0000 (16:52 +0300)]
clear_in_neutral_point set to false for Sketch/Fillet feature.

8 years agoIssue #1366: Remove Sub-Shapes feature added.
dbv [Thu, 26 May 2016 13:26:10 +0000 (16:26 +0300)]
Issue #1366: Remove Sub-Shapes feature added.

8 years agoImprovement: providing wire selection mode for sketch. From now on, wire selection...
nds [Thu, 26 May 2016 12:56:26 +0000 (15:56 +0300)]
Improvement: providing wire selection mode for sketch. From now on, wire selection mode(defined in XML) switches wire selection of sketch.

PartSet_Module modification for selection Faces on Sketch is temporary commented.

8 years agoWrong case correction: start translation, select compsolid, activate value control...
nds [Thu, 26 May 2016 11:06:36 +0000 (14:06 +0300)]
Wrong case correction: start translation, select compsolid, activate value control. Result: argument presentation(yellow) is hidden.

8 years agoMerge branch 'master' of salome:modules/shaper
mpv [Thu, 26 May 2016 10:43:45 +0000 (13:43 +0300)]
Merge branch 'master' of salome:modules/shaper