]> SALOME platform Git repositories - modules/hydro.git/log
Salome HOME
modules/hydro.git
10 years agoBugs 113, 114: polyline which are not a wire is not allowed to be a limit.
mzn [Fri, 22 Nov 2013 07:36:13 +0000 (07:36 +0000)]
Bugs 113, 114: polyline which are not a wire is not allowed to be a limit.

10 years agoBugs 113, 114: if the immersible zone is a compound of faces - create split data...
mzn [Fri, 22 Nov 2013 07:34:41 +0000 (07:34 +0000)]
Bugs 113, 114: if the immersible zone is a compound of faces - create split data for each face contained in the compound.

10 years agoMinor corrections.
mzn [Fri, 22 Nov 2013 07:32:56 +0000 (07:32 +0000)]
Minor corrections.

10 years agoFix bug because of interface changing.
akl [Fri, 22 Nov 2013 07:06:55 +0000 (07:06 +0000)]
Fix bug because of interface changing.

10 years agoImplementation of changing coordinates for array of points.
akl [Fri, 22 Nov 2013 06:35:04 +0000 (06:35 +0000)]
Implementation of changing coordinates for array of points.

10 years agoFix for the #trefs 127: regression - modification mode deletes section when modify...
nds [Fri, 22 Nov 2013 06:17:23 +0000 (06:17 +0000)]
Fix for the #trefs 127: regression - modification mode deletes section when modify point coordinates in table

10 years agoFix for the #trefs 121: undo leads error
nds [Fri, 22 Nov 2013 04:59:18 +0000 (04:59 +0000)]
Fix for the #trefs 121: undo leads error

10 years agolinux compilation.
adv [Fri, 22 Nov 2013 04:00:29 +0000 (04:00 +0000)]
linux compilation.

10 years agoFix Undo/Redo of section removing.
akl [Thu, 21 Nov 2013 18:37:39 +0000 (18:37 +0000)]
Fix Undo/Redo of section removing.

10 years agoImplementation of Undo/Redo of 'SetPoints', 'AddPoints', 'RemovePoints'.
akl [Thu, 21 Nov 2013 17:48:51 +0000 (17:48 +0000)]
Implementation of Undo/Redo of 'SetPoints', 'AddPoints', 'RemovePoints'.

10 years agoMove 'updateUndoRedo()' to 'finishCurveModification()' to call it after every
akl [Thu, 21 Nov 2013 17:48:08 +0000 (17:48 +0000)]
Move 'updateUndoRedo()' to 'finishCurveModification()' to call it after every
 operation.

10 years agoFix bug #123 (Undo is enabled for polyline that just was
akl [Thu, 21 Nov 2013 17:42:10 +0000 (17:42 +0000)]
Fix bug #123 (Undo is enabled for polyline that just was
 opened for edition) : use internal method to build the edited polyline to avoid
 Undo/Redo cover.

10 years agoImplementation of Undo/Redo of 'SetPoints', 'AddPoints', 'RemovePoints'.
akl [Thu, 21 Nov 2013 16:55:08 +0000 (16:55 +0000)]
Implementation of Undo/Redo of 'SetPoints', 'AddPoints', 'RemovePoints'.

10 years agoBugs #113, 114: use polylines with several section and immersible zones made of such...
mzn [Thu, 21 Nov 2013 15:48:23 +0000 (15:48 +0000)]
Bugs #113, 114: use polylines with several section and immersible zones made of such polylines.

10 years agoTemporary solution for bug 109. Will be rolled back when obstacles will be implented...
adv [Thu, 21 Nov 2013 13:55:02 +0000 (13:55 +0000)]
Temporary solution for bug 109. Will be rolled back when obstacles will be implented fully.

10 years agoRemoving of presentations from view corrected.
adv [Thu, 21 Nov 2013 13:41:30 +0000 (13:41 +0000)]
Removing of presentations from view corrected.

10 years agoSize of color widget (Bug #120).
adv [Thu, 21 Nov 2013 12:46:13 +0000 (12:46 +0000)]
Size of color widget (Bug #120).

10 years agoUpdate the names of Regions and Zones if case name changed (Bug #110).
adv [Thu, 21 Nov 2013 12:21:08 +0000 (12:21 +0000)]
Update the names of Regions and Zones if case name changed (Bug #110).

10 years agoFix for the #trefs 106 - Edit polyline Modification mode - rows in table change their...
nds [Thu, 21 Nov 2013 11:30:31 +0000 (11:30 +0000)]
Fix for the #trefs 106 - Edit polyline Modification mode - rows in table change their position

10 years agoBug #119: create obstacles from several objects in GEOM is wrong.
mzn [Thu, 21 Nov 2013 10:40:43 +0000 (10:40 +0000)]
Bug #119: create obstacles from several objects in GEOM is wrong.

10 years agoNames of module actions corrected (Bug #107).
adv [Thu, 21 Nov 2013 10:27:21 +0000 (10:27 +0000)]
Names of module actions corrected (Bug #107).

10 years agoCurve displayer is moved to the curve creator.
nds [Thu, 21 Nov 2013 09:25:39 +0000 (09:25 +0000)]
Curve displayer is moved to the curve creator.
This is an attempt to fix the bug refs #94 - Fatal error after second Edit polyline
A fix for the bug #refs 111 - curve becomes invisible after edit in modification mode

10 years agoCurve displayer is moved to the curve creator.
nds [Thu, 21 Nov 2013 09:24:19 +0000 (09:24 +0000)]
Curve displayer is moved to the curve creator.
This is an attempt to fix the bug refs #94 - Fatal error after second Edit polyline

10 years agoRemove functionality by popup menu and the keyboard button "Delete".
nds [Thu, 21 Nov 2013 07:19:46 +0000 (07:19 +0000)]
Remove functionality by popup menu and the keyboard button "Delete".

10 years agoRemove functionality by popup menu and the keyboard button "Delete".
nds [Thu, 21 Nov 2013 06:58:52 +0000 (06:58 +0000)]
Remove functionality by popup menu and the keyboard button "Delete".

10 years agoLinux compilation.
adv [Thu, 21 Nov 2013 04:03:35 +0000 (04:03 +0000)]
Linux compilation.

10 years ago- Bathymethries are colored now
rkv [Wed, 20 Nov 2013 17:17:08 +0000 (17:17 +0000)]
- Bathymethries are colored now
- Hide/show is fixed for bathymetries (however still without automatic viewer opening)

10 years agoImprove of retrieving shapes from region and case.
mzn [Wed, 20 Nov 2013 15:50:57 +0000 (15:50 +0000)]
Improve of retrieving shapes from region and case.

10 years agoSimplify the error message.
mzn [Wed, 20 Nov 2013 15:49:23 +0000 (15:49 +0000)]
Simplify the error message.

10 years agoUsing stl container instead of Qt.
nds [Wed, 20 Nov 2013 12:11:02 +0000 (12:11 +0000)]
Using stl container instead of Qt.

10 years agoUsing stl container instead of Qt.
nds [Wed, 20 Nov 2013 11:48:06 +0000 (11:48 +0000)]
Using stl container instead of Qt.

10 years agoAdd a new functions: 'removeSeveralPoints' and 'setSeveralPoints' to remove or move...
akl [Wed, 20 Nov 2013 11:13:41 +0000 (11:13 +0000)]
Add a new functions: 'removeSeveralPoints' and 'setSeveralPoints' to remove or move several
 points at once.

10 years agoImported file name corrected.
adv [Wed, 20 Nov 2013 10:03:01 +0000 (10:03 +0000)]
Imported file name corrected.

10 years agoA correction is necessary to the presentation doesn't disappear after Undo/Redo actions.
nds [Wed, 20 Nov 2013 09:50:16 +0000 (09:50 +0000)]
A correction is necessary to the presentation doesn't disappear after Undo/Redo actions.

10 years ago- VTKPrsDisplayer is introduced for Bathymetry visualization.
rkv [Wed, 20 Nov 2013 09:38:21 +0000 (09:38 +0000)]
- VTKPrsDisplayer is introduced for Bathymetry visualization.
- All displayers are inherited from the abstract displayer.

10 years agoRemove action should be enabled if the modification mode is activated and there are...
nds [Wed, 20 Nov 2013 09:08:56 +0000 (09:08 +0000)]
Remove action should be enabled if the modification mode is activated and there are no selected Section item.

10 years agoRemove action should be enabled if the modification mode is activated and there are...
nds [Wed, 20 Nov 2013 09:02:33 +0000 (09:02 +0000)]
Remove action should be enabled if the modification mode is activated and there are no selected Section item.

10 years agoExtending the modification mode for a lot of sections.
nds [Wed, 20 Nov 2013 08:54:51 +0000 (08:54 +0000)]
Extending the modification mode for a lot of sections.

10 years agoExtending the modification mode for a lot of sections.
nds [Wed, 20 Nov 2013 08:30:45 +0000 (08:30 +0000)]
Extending the modification mode for a lot of sections.

10 years agoBug #97: size of dialog \93Export finished succesfully\94 is not enough
mzn [Wed, 20 Nov 2013 07:54:00 +0000 (07:54 +0000)]
Bug #97: size of dialog \93Export finished succesfully\94 is not enough

10 years agoSet polyline visible after it creation (Bug #80).
adv [Wed, 20 Nov 2013 07:47:59 +0000 (07:47 +0000)]
Set polyline visible after it creation (Bug #80).

10 years agoAdd possibility to generate name without indexes.
mzn [Wed, 20 Nov 2013 07:41:15 +0000 (07:41 +0000)]
Add possibility to generate name without indexes.

10 years agoMove color tags to the base geometrical object class.
mzn [Wed, 20 Nov 2013 07:40:31 +0000 (07:40 +0000)]
Move color tags to the base geometrical object class.

10 years agoMinor corrections.
mzn [Wed, 20 Nov 2013 07:39:48 +0000 (07:39 +0000)]
Minor corrections.

10 years agoImplement panel for obstacles creation/modification.
mzn [Wed, 20 Nov 2013 07:38:55 +0000 (07:38 +0000)]
Implement panel for obstacles creation/modification.

10 years agoFeature #72: remove widgets for the color assignment from the immersible zone\92s dialog
mzn [Wed, 20 Nov 2013 07:38:17 +0000 (07:38 +0000)]
Feature #72: remove widgets for the color assignment from the immersible zone\92s dialog

10 years agoUse SalomeOmniORB.
mzn [Wed, 20 Nov 2013 07:32:36 +0000 (07:32 +0000)]
Use SalomeOmniORB.

10 years agoShow\hide operation is granted for all other operations (issues 69 and 101).
adv [Wed, 20 Nov 2013 07:32:14 +0000 (07:32 +0000)]
Show\hide operation is granted for all other operations (issues 69 and 101).

10 years agoTranslation corrected.
adv [Wed, 20 Nov 2013 07:14:09 +0000 (07:14 +0000)]
Translation corrected.

10 years agoFix Undo/Redo of removing of middle point.
akl [Wed, 20 Nov 2013 06:58:21 +0000 (06:58 +0000)]
Fix Undo/Redo of removing of middle point.

10 years ago"Lat" and "Lang" labels added in import image panel (issue).
adv [Wed, 20 Nov 2013 05:42:41 +0000 (05:42 +0000)]
"Lat" and "Lang" labels added in import image panel (issue).

10 years agoAdd a new 'moveSection' operation to change position of section in the list.
akl [Tue, 19 Nov 2013 17:09:58 +0000 (17:09 +0000)]
Add a new 'moveSection' operation to change position of section in the list.

10 years agoBndBox for Geom_Line. In the algorithm of the point search on the segment, a projecti...
nds [Tue, 19 Nov 2013 17:07:35 +0000 (17:07 +0000)]
BndBox for Geom_Line. In the algorithm of the point search on the segment, a projection is built. In case of Geom_Line it is built on the infinite line. So, we need to check the point if it is in the box.
Drag&drop correction to don't show selection bounding rect. To restore selection after drag operation.

10 years agoUndo/Redo operations for Clear, Join, setClosed, setSectionName, setSectionType,...
akl [Tue, 19 Nov 2013 16:45:08 +0000 (16:45 +0000)]
Undo/Redo operations for Clear, Join, setClosed, setSectionName, setSectionType, setPoint.

10 years agoBug with remove multi-selected points.
nds [Tue, 19 Nov 2013 14:53:06 +0000 (14:53 +0000)]
Bug with remove multi-selected points.

10 years agoInsert a new point on a segment functionality. Fix for a bug with a point addition...
nds [Tue, 19 Nov 2013 14:40:13 +0000 (14:40 +0000)]
Insert a new point on a segment functionality. Fix for a bug  with a point addition on a spline. A new point is inserted between incorrect points.

10 years agoFix Undo/Redo of AddSection, RemoveSection, AddPoint, RemovePoint.
akl [Tue, 19 Nov 2013 13:08:30 +0000 (13:08 +0000)]
Fix Undo/Redo of AddSection, RemoveSection, AddPoint, RemovePoint.

10 years agoGet a shape instead of wire, because of not connected sections could not be splitted
akl [Tue, 19 Nov 2013 13:01:30 +0000 (13:01 +0000)]
Get a shape instead of wire, because of not connected sections could not be splitted
 into wire.

10 years agoSet zero viewer for the pane in order to close local selection inside the viewer...
nds [Tue, 19 Nov 2013 10:34:08 +0000 (10:34 +0000)]
Set zero viewer for the pane in order to close local selection inside the viewer and disconnect it.

10 years agoInsert a point on a selected segment - debug
nds [Tue, 19 Nov 2013 10:33:12 +0000 (10:33 +0000)]
Insert a point on a selected segment - debug
Close local context during modes change, start/stop operation.
Drag&drop debug.

10 years agoA new point is inserted on existing segment. Line/spline curve type.
adv [Tue, 19 Nov 2013 08:19:50 +0000 (08:19 +0000)]
A new point is inserted on existing segment. Line/spline curve type.

10 years agoMerging with V7_main branch.
adv [Mon, 18 Nov 2013 11:33:19 +0000 (11:33 +0000)]
Merging with V7_main branch.

10 years agoFix for the bug #56: Show, Show only, Hide for Region and Zone under Region.
rkv [Mon, 18 Nov 2013 06:08:47 +0000 (06:08 +0000)]
Fix for the bug #56: Show, Show only, Hide for Region and Zone under Region.

10 years agoFix for the bug #51: unnecessary fit all after show-hide object
rkv [Mon, 18 Nov 2013 06:07:59 +0000 (06:07 +0000)]
Fix for the bug #51: unnecessary fit all after show-hide object

10 years agoFix for the bug #56: Show, Show only, Hide for Region and Zone under Region.
rkv [Fri, 15 Nov 2013 11:33:04 +0000 (11:33 +0000)]
Fix for the bug #56: Show, Show only, Hide for Region and Zone under Region.

10 years agoModified mode for the polyline. It is possible to change the polyline points. BR_hydro_v_0_3
adv [Fri, 15 Nov 2013 08:40:01 +0000 (08:40 +0000)]
Modified mode for the polyline. It is possible to change the polyline points.
ToDo:
- double editor for point coordinate
- restore selection after the value applying - IT IS DONE
- local selection only for section objects
- viewer comes to the widget constructor

10 years agoLinking libraries corrected.
adv [Fri, 15 Nov 2013 07:17:07 +0000 (07:17 +0000)]
Linking libraries corrected.

10 years agoLinux compilation.
adv [Fri, 15 Nov 2013 06:30:28 +0000 (06:30 +0000)]
Linux compilation.

10 years agoLinux compilation.
adv [Fri, 15 Nov 2013 06:24:39 +0000 (06:24 +0000)]
Linux compilation.

10 years agoCurve creator has been moved from GEOM to HYDRO.
adv [Fri, 15 Nov 2013 05:59:12 +0000 (05:59 +0000)]
Curve creator has been moved from GEOM to HYDRO.

10 years agoDoubled update of preview corrected.
adv [Thu, 14 Nov 2013 08:55:01 +0000 (08:55 +0000)]
Doubled update of preview corrected.

10 years agoTransparency for immersible zones correction(Bug #71).
adv [Thu, 14 Nov 2013 08:51:54 +0000 (08:51 +0000)]
Transparency for immersible zones correction(Bug #71).

10 years agoFix for the bug #66: Hydro has unknown version. Version is set to 0.3 in the LightApp...
rkv [Thu, 14 Nov 2013 07:17:43 +0000 (07:17 +0000)]
Fix for the bug #66: Hydro has unknown version. Version is set to 0.3 in the LightApp.xml.

10 years agoFix for the bug #66: Hydro has unknown version.
rkv [Thu, 14 Nov 2013 06:59:57 +0000 (06:59 +0000)]
Fix for the bug #66: Hydro has unknown version.

10 years agoFix for the bug #42: point C is not activated, but point C is shown in preview in...
rkv [Wed, 13 Nov 2013 15:38:00 +0000 (15:38 +0000)]
Fix for the bug #42: point C is not activated, but point C is shown in preview in Transform image view

10 years agoFix: it was impossible to include geometry objects when a new calculation case is...
rkv [Wed, 13 Nov 2013 11:42:55 +0000 (11:42 +0000)]
Fix: it was impossible to include geometry objects when a new calculation case is being created.

10 years agoLinux compilation.
adv [Wed, 13 Nov 2013 08:20:06 +0000 (08:20 +0000)]
Linux compilation.

10 years agoFix for the bug #42: point C is not activated, but point C is shown in preview in...
rkv [Wed, 13 Nov 2013 07:56:08 +0000 (07:56 +0000)]
Fix for the bug #42: point C is not activated, but point C is shown in preview in Transform image view

10 years agoFix for the bug #49: Message box on objects list change is absent
rkv [Tue, 12 Nov 2013 13:12:32 +0000 (13:12 +0000)]
Fix for the bug #49: Message box on objects list change is absent

10 years agoFix for the bug #59: bathymetry can not bet defined for conflicted zone.
rkv [Tue, 12 Nov 2013 12:10:28 +0000 (12:10 +0000)]
Fix for the bug #59: bathymetry can not bet defined for conflicted zone.

10 years agoFix for the bug #46: latitude and longitude limits.
rkv [Tue, 12 Nov 2013 11:06:19 +0000 (11:06 +0000)]
Fix for the bug #46: latitude and longitude limits.

10 years agoFix for the bug #48: Default name for immersible zone
rkv [Tue, 12 Nov 2013 10:59:42 +0000 (10:59 +0000)]
Fix for the bug #48: Default name for immersible zone
and
#55: unnecessary \93_\94 in object names.

10 years agoFix for the bug #55: unnecessary \93_\94 in object names.
rkv [Tue, 12 Nov 2013 10:15:38 +0000 (10:15 +0000)]
Fix for the bug #55: unnecessary \93_\94 in object names.

10 years agoFix for the bug #40: Fatal error when edit image.
rkv [Tue, 12 Nov 2013 09:44:26 +0000 (09:44 +0000)]
Fix for the bug #40: Fatal error when edit image.

10 years agoUpdate names of regions in calculation case if its order has been changed (Bug #47).
adv [Tue, 12 Nov 2013 07:44:13 +0000 (07:44 +0000)]
Update names of regions in calculation case if its order has been changed (Bug #47).

10 years agoFix for the bug #37: Error when import image with format not supported.
rkv [Mon, 11 Nov 2013 10:48:16 +0000 (10:48 +0000)]
Fix for the bug #37: Error when import image with format not supported.

10 years agoBoundary polyline presentation in the viewer is added for Calculation Case operation.
rkv [Mon, 11 Nov 2013 10:08:15 +0000 (10:08 +0000)]
Boundary polyline presentation in the viewer is added for Calculation Case operation.

10 years agoUpdate flag for calculation case during polyline changing.
adv [Mon, 11 Nov 2013 10:02:58 +0000 (10:02 +0000)]
Update flag for calculation case during polyline changing.

10 years agoBoundary polyline can be selected now in the Calculation case dialog.
rkv [Mon, 11 Nov 2013 09:11:49 +0000 (09:11 +0000)]
Boundary polyline can be selected now in the Calculation case dialog.

10 years agoBoundary polyline added for calculation case.
adv [Mon, 11 Nov 2013 08:04:36 +0000 (08:04 +0000)]
Boundary polyline added for calculation case.

10 years agoNew calculation case dialog layout is implemented. Two lists of geometry objects...
rkv [Mon, 11 Nov 2013 07:27:21 +0000 (07:27 +0000)]
New calculation case dialog layout is implemented. Two lists of geometry objects are implemented - included and available. Limits polyline combobox is not yet filled and processed.

10 years agoMinor changes.
adv [Mon, 11 Nov 2013 05:26:30 +0000 (05:26 +0000)]
Minor changes.

10 years agoMinor change.
adv [Mon, 11 Nov 2013 05:03:37 +0000 (05:03 +0000)]
Minor change.

10 years agoGet the gepmetry objects method added.
adv [Mon, 11 Nov 2013 05:03:26 +0000 (05:03 +0000)]
Get the gepmetry objects method added.

10 years agoFix of Bug #39: Lambert93/Geodesic coordinates confusion
rkv [Fri, 8 Nov 2013 10:59:43 +0000 (10:59 +0000)]
Fix of Bug #39: Lambert93/Geodesic coordinates confusion

10 years agoFirst implementation of Profiles.
adv [Thu, 7 Nov 2013 17:07:21 +0000 (17:07 +0000)]
First implementation of Profiles.

10 years agoFix of crash when edit an existing image with reference image.
rkv [Thu, 7 Nov 2013 13:57:38 +0000 (13:57 +0000)]
Fix of crash when edit an existing image with reference image.

10 years agoTemporary fix to avoid blinking of coincident zones in OCC view has been rolled back...
adv [Thu, 7 Nov 2013 13:35:59 +0000 (13:35 +0000)]
Temporary fix to avoid blinking of coincident zones in OCC view has been rolled back because of problems with intersection (Bug #36).

10 years agopatch for correct compilation on Linux
asl [Thu, 7 Nov 2013 11:57:18 +0000 (11:57 +0000)]
patch for correct compilation on Linux

10 years agoDon't take into account the selected polyline if creation operation was called.
akl [Thu, 7 Nov 2013 11:40:15 +0000 (11:40 +0000)]
Don't take into account the selected polyline if creation operation was called.