]> SALOME platform Git repositories - modules/shaper.git/log
Salome HOME
modules/shaper.git
5 years agoImplementation of proposal 3 in the issue #2882 : Groups are not exported to GEOM...
mpv [Tue, 26 Mar 2019 14:22:14 +0000 (17:22 +0300)]
Implementation of proposal 3 in the issue #2882 : Groups are not exported to GEOM under the shapes when there several results.

To export results without joining them into compound. In this case group that contains selection on several results must be splitted into several groups (with same name), located under the corresponding results.

5 years agoLaunch restricted models tests if repository is accessible.
mpv [Mon, 25 Mar 2019 10:09:04 +0000 (13:09 +0300)]
Launch restricted models tests if repository is accessible.

5 years agoIssue #2894: SIGSEGV in trim after double-click
azv [Fri, 22 Mar 2019 10:54:13 +0000 (13:54 +0300)]
Issue #2894: SIGSEGV in trim after double-click

Fix crash when selected point is not lying on the trimmed feature.

5 years agoFix incorrect treating a constraint Angle type while dumping (issue #2893)
azv [Fri, 22 Mar 2019 09:53:47 +0000 (12:53 +0300)]
Fix incorrect treating a constraint Angle type while dumping (issue #2893)

5 years agoIssue #2888: Limit symbols for parameters names
vsv [Fri, 22 Mar 2019 08:41:21 +0000 (11:41 +0300)]
Issue #2888: Limit symbols for parameters names

5 years agoUpdate of the unit-test for checking the issue #2892
mpv [Fri, 22 Mar 2019 05:16:04 +0000 (08:16 +0300)]
Update of the unit-test for checking the issue #2892

5 years agoFix for the issue #2892 : Group in error when loading dump from Test2241.py
mpv [Fri, 22 Mar 2019 05:11:40 +0000 (08:11 +0300)]
Fix for the issue #2892 : Group in error when loading dump from Test2241.py

5 years agoFix incorrect treating a constraint Angle type while dumping (issue #2893)
azv [Thu, 21 Mar 2019 13:00:23 +0000 (16:00 +0300)]
Fix incorrect treating a constraint Angle type while dumping (issue #2893)

5 years agoIssue #2889:Multi-selection of features in Object Browser
vsv [Wed, 20 Mar 2019 12:22:54 +0000 (15:22 +0300)]
Issue #2889:Multi-selection of features in Object Browser

5 years agoIssue #2890: Wrong partition result with planes and SIGSEGV
azv [Wed, 20 Mar 2019 09:44:45 +0000 (12:44 +0300)]
Issue #2890: Wrong partition result with planes and SIGSEGV

Check number of points in the result when verifying a wire is a rectangle.

5 years agoMove to the newer version of SALOME
mpv [Wed, 20 Mar 2019 09:06:31 +0000 (12:06 +0300)]
Move to the newer version of SALOME

5 years agoIssue #2888: Use only ASCII symbols for parameters names
vsv [Wed, 20 Mar 2019 08:54:05 +0000 (11:54 +0300)]
Issue #2888: Use only ASCII symbols for parameters names

5 years agoMove to the newer version of SALOME
mpv [Tue, 19 Mar 2019 05:02:24 +0000 (08:02 +0300)]
Move to the newer version of SALOME

5 years agoRenaming Fill in Split : Unit tests cgt/split V9_3_0b1
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 14 Mar 2019 15:34:48 +0000 (16:34 +0100)]
Renaming Fill in Split : Unit tests

5 years agoRenaming Fill in Split : Unit tests
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 14 Mar 2019 14:20:36 +0000 (15:20 +0100)]
Renaming Fill in Split : Unit tests

5 years agoRenaming Fill in Split : Read old HDF
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 14 Mar 2019 10:17:31 +0000 (11:17 +0100)]
Renaming Fill in Split : Read old HDF

5 years agoMerge branch 'master' into cgt/split
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 14 Mar 2019 06:42:20 +0000 (07:42 +0100)]
Merge branch 'master' into cgt/split

5 years agoMisprint correction
azv [Wed, 13 Mar 2019 18:42:22 +0000 (21:42 +0300)]
Misprint correction

5 years agoFix one more regression in ModelHighAPI_Dumper related to the number of digits writte...
azv [Wed, 13 Mar 2019 13:32:24 +0000 (16:32 +0300)]
Fix one more regression in ModelHighAPI_Dumper related to the number of digits written for double values.

5 years agoFix regression in ModelHighAPI_Dumper
azv [Wed, 13 Mar 2019 11:59:35 +0000 (14:59 +0300)]
Fix regression in ModelHighAPI_Dumper

5 years agoImprove code coverage for ModelAPI package
azv [Wed, 13 Mar 2019 09:49:43 +0000 (12:49 +0300)]
Improve code coverage for ModelAPI package

5 years agoImprove code coverage for GeomValidators package
azv [Wed, 13 Mar 2019 08:13:42 +0000 (11:13 +0300)]
Improve code coverage for GeomValidators package

5 years agoMake models and compatibility tests able to be enabled simultaneously.
mpv [Wed, 13 Mar 2019 06:21:50 +0000 (09:21 +0300)]
Make models and compatibility tests able to be enabled simultaneously.

5 years agoUpdate tests for export to GEOM according to the Python dump change.
azv [Wed, 13 Mar 2019 05:38:54 +0000 (08:38 +0300)]
Update tests for export to GEOM according to the Python dump change.

5 years agoFix compilation error in SHAPERGUI_DataModel: use default types of dumped data.
azv [Wed, 13 Mar 2019 02:42:53 +0000 (05:42 +0300)]
Fix compilation error in SHAPERGUI_DataModel: use default types of dumped data.

5 years agoUpdate Python dump to write both standard naming and geometrical selection at once
azv [Tue, 12 Mar 2019 13:17:36 +0000 (16:17 +0300)]
Update Python dump to write both standard naming and geometrical selection at once

5 years agoRenaming Fill in Split : Help (General index)
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Tue, 12 Mar 2019 08:16:46 +0000 (09:16 +0100)]
Renaming Fill in Split : Help (General index)

5 years agoUpdate for compatibility tests
vsv [Mon, 11 Mar 2019 16:30:22 +0000 (19:30 +0300)]
Update for compatibility tests

5 years agoImplement Python API compatibility tests
vsv [Mon, 11 Mar 2019 14:12:54 +0000 (17:12 +0300)]
Implement Python API compatibility tests

5 years agoRemove extra warnings
vsv [Mon, 11 Mar 2019 11:52:20 +0000 (14:52 +0300)]
Remove extra warnings

5 years agoFix for the issue #2886 : In the Help main page of SHAPER the section "Sketch plug...
mpv [Mon, 11 Mar 2019 07:09:52 +0000 (10:09 +0300)]
Fix for the issue #2886 : In the Help main page of SHAPER the section "Sketch plug-in" appear twice

5 years agoMerge branch 'master' into cgt/split
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 7 Mar 2019 14:36:19 +0000 (15:36 +0100)]
Merge branch 'master' into cgt/split

5 years agoMerge branch 'master' into cgt/split
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 7 Mar 2019 14:25:44 +0000 (15:25 +0100)]
Merge branch 'master' into cgt/split

5 years agoUpdate the currently used SALOME version
mpv [Thu, 7 Mar 2019 10:08:33 +0000 (13:08 +0300)]
Update the currently used SALOME version

5 years agoMerge branch 'master' into cgt/split
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 7 Mar 2019 08:16:17 +0000 (09:16 +0100)]
Merge branch 'master' into cgt/split

5 years agoRenaming Fill in Split : Dump
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 7 Mar 2019 08:07:34 +0000 (09:07 +0100)]
Renaming Fill in Split : Dump

5 years agoRenaming Fill in Split : Help (change name of result)
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 7 Mar 2019 07:56:51 +0000 (08:56 +0100)]
Renaming Fill in Split : Help (change name of result)

5 years agoRenaming Fill in Split : Help
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 7 Mar 2019 07:52:29 +0000 (08:52 +0100)]
Renaming Fill in Split : Help

5 years agoEnable multithread in boolean operations and partition
Christophe Bourcier [Fri, 20 Jul 2018 07:24:30 +0000 (09:24 +0200)]
Enable multithread in boolean operations and partition

5 years agoRemove of Box macro feature V9_3_0a2
mpv [Thu, 7 Mar 2019 07:40:24 +0000 (10:40 +0300)]
Remove of Box macro feature

5 years agoRenaming Fill in Split : IHM and HDF
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Thu, 7 Mar 2019 07:20:43 +0000 (08:20 +0100)]
Renaming Fill in Split : IHM and HDF

5 years agoMovement of the Linux reference to the SALOME current (with OCCT 7.3p3)
mpv [Wed, 6 Mar 2019 14:54:24 +0000 (17:54 +0300)]
Movement of the Linux reference to the SALOME current (with OCCT 7.3p3)

5 years agoFix for the issue #2225 : Incorrect face naming when creating a pipe from a face...
mpv [Wed, 6 Mar 2019 12:33:07 +0000 (15:33 +0300)]
Fix for the issue #2225 : Incorrect face naming when creating a pipe from a face. Usage of OCCT 7.3.0p3 fix.

5 years agoThe fix based on DBC mail 04.03.2019. If the selected solid was not modified by the...
mpv [Tue, 5 Mar 2019 12:18:25 +0000 (15:18 +0300)]
The fix based on DBC mail 04.03.2019. If the selected solid was not modified by the following Fill operation, this selection disappears after movement to the end.

5 years agoIssue #2876: Fix synchronization of objects display on module activation
vsv [Tue, 5 Mar 2019 08:23:43 +0000 (11:23 +0300)]
Issue #2876: Fix synchronization of objects display on module activation

5 years agoMerge branch 'V9_2_2_BR'
vsr [Tue, 5 Mar 2019 07:29:33 +0000 (10:29 +0300)]
Merge branch 'V9_2_2_BR'

5 years agoUpdate failed tests due to the stabilization fix (merge of selection list attributes...
mpv [Mon, 4 Mar 2019 13:00:43 +0000 (16:00 +0300)]
Update failed tests due to the stabilization fix (merge of selection list attributes) just before

5 years agoFix instability of TestPartition_SolidsHistory.py : duplicates are removed even they...
mpv [Mon, 4 Mar 2019 11:42:54 +0000 (14:42 +0300)]
Fix instability of TestPartition_SolidsHistory.py : duplicates are removed even they are first in the updateInHistory results.

5 years agoExclude GDML plugin and related from the coverage report. Improve coverage quality... HighLevelObjectsHierarchy
azv [Fri, 1 Mar 2019 07:56:56 +0000 (10:56 +0300)]
Exclude GDML plugin and related from the coverage report. Improve coverage quality of GeomAPI plugin.

5 years agoFix the parameter update floating problem in sprocket.py
mpv [Fri, 1 Mar 2019 07:24:24 +0000 (10:24 +0300)]
Fix the parameter update floating problem in sprocket.py

5 years agoFix for issue #2872 : Can't export and dump in master
mpv [Thu, 28 Feb 2019 13:07:12 +0000 (16:07 +0300)]
Fix for issue #2872 : Can't export and dump in master

5 years agoIssue #2879: "What is" does not work
azv [Thu, 28 Feb 2019 11:06:13 +0000 (14:06 +0300)]
Issue #2879: "What is" does not work

Take into account trimmed curves while verifying a wire is a rectangle.

5 years agoIssue #2878: In Extrusion, can't select all in Vertex feature
azv [Thu, 28 Feb 2019 10:44:51 +0000 (13:44 +0300)]
Issue #2878: In Extrusion, can't select all in Vertex feature

Add checks of vertices to the corresponding validator.

5 years agoIssue #2880: SIGSEGV after undo an arc deletion
azv [Thu, 28 Feb 2019 09:51:35 +0000 (12:51 +0300)]
Issue #2880: SIGSEGV after undo an arc deletion

Avoid crash while getting the position of tangency presentation.

5 years agoUpdate unit-tests according to changing of the face modification history
azv [Thu, 28 Feb 2019 04:53:46 +0000 (07:53 +0300)]
Update unit-tests according to changing of the face modification history

5 years agoIssue #2873: Freeze when inserting a new folder
azv [Wed, 27 Feb 2019 14:03:28 +0000 (17:03 +0300)]
Issue #2873: Freeze when inserting a new folder

Fix incorrect naming new folder.

5 years agoUpdate names of modified faces of the transformation features (Translation, Rotation...
azv [Wed, 27 Feb 2019 13:33:08 +0000 (16:33 +0300)]
Update names of modified faces of the transformation features (Translation, Rotation, Symmetry and so on).

5 years agoFix misprint in SketchBuilder
azv [Wed, 27 Feb 2019 13:31:55 +0000 (16:31 +0300)]
Fix misprint in SketchBuilder

5 years agoSALOME quick test is added for the SHAPER
mpv [Wed, 27 Feb 2019 12:52:38 +0000 (15:52 +0300)]
SALOME quick test is added for the SHAPER

5 years agoAn additional fix for the issue #2697 : Fuse with remove intersection edges and FuseF...
mpv [Tue, 26 Feb 2019 14:22:43 +0000 (17:22 +0300)]
An additional fix for the issue #2697 : Fuse with remove intersection edges and FuseFaces does not work on cylindrical faces (BARCOM). The algorithm tolerance increase.

5 years agoMeet coding style (split too long line)
azv [Tue, 26 Feb 2019 12:48:55 +0000 (15:48 +0300)]
Meet coding style (split too long line)

5 years agoMerge remote-tracking branch 'remotes/origin/HigherLevelObjectsHistory'
azv [Tue, 26 Feb 2019 12:38:17 +0000 (15:38 +0300)]
Merge remote-tracking branch 'remotes/origin/HigherLevelObjectsHistory'

# Conflicts:
# env.sh
# src/FeaturesPlugin/CMakeLists.txt
# src/SketchPlugin/Test/TestUpdateSketch.py

5 years agoUnit test for moving group after BuildPlugin_Face feature HigherLevelObjectsHistory
azv [Tue, 26 Feb 2019 12:31:49 +0000 (15:31 +0300)]
Unit test for moving group after BuildPlugin_Face feature

5 years agoHigh level objects history implementation for BuildPlugin features.
azv [Mon, 25 Feb 2019 11:41:30 +0000 (14:41 +0300)]
High level objects history implementation for BuildPlugin features.

5 years agoIncrement version: 9.2.2 V9_2_2_BR V9_2_BR vsr/v9_2_2_br V9_2_2
vsr [Mon, 25 Feb 2019 13:02:17 +0000 (16:02 +0300)]
Increment version: 9.2.2

5 years agoMake "Macro" menu be the last, not just after the Sketch. V9_3_0a1
mpv [Fri, 22 Feb 2019 12:42:26 +0000 (15:42 +0300)]
Make "Macro" menu be the last, not just after the Sketch.

5 years agoMove to the stable SALOME version on Linux
mpv [Thu, 21 Feb 2019 09:58:31 +0000 (12:58 +0300)]
Move to the stable SALOME version on Linux

5 years agoMove to the stable SALOME version on Linux
mpv [Thu, 21 Feb 2019 08:44:02 +0000 (11:44 +0300)]
Move to the stable SALOME version on Linux

5 years agoMove to the stable SALOME version on Linux
mpv [Thu, 21 Feb 2019 08:44:02 +0000 (11:44 +0300)]
Move to the stable SALOME version on Linux

5 years agoIssue #2867: Initialize SHAPER viewer if OCC viewer already exists in initialization...
vsv [Tue, 19 Feb 2019 09:18:05 +0000 (12:18 +0300)]
Issue #2867: Initialize SHAPER viewer if OCC viewer already exists in initialization moment.

5 years agoUpdate copyrights
vsr [Mon, 18 Feb 2019 11:05:08 +0000 (14:05 +0300)]
Update copyrights

5 years agoHigh level objects history implementation for Placement feature.
azv [Mon, 18 Feb 2019 10:22:34 +0000 (13:22 +0300)]
High level objects history implementation for Placement feature.

5 years agoRename tests for moving groups
azv [Mon, 18 Feb 2019 09:51:05 +0000 (12:51 +0300)]
Rename tests for moving groups

5 years agoHigh level objects history implementation for Translation, Rotation and Scale features.
azv [Mon, 18 Feb 2019 09:48:41 +0000 (12:48 +0300)]
High level objects history implementation for Translation, Rotation and Scale features.

5 years agoIssue #2867: Use enumeration values for ZLayer definition
vsv [Mon, 18 Feb 2019 09:02:43 +0000 (12:02 +0300)]
Issue #2867: Use enumeration values for ZLayer definition

5 years agoAn additiona lcondition to avoid crash in some Abort cases
mpv [Mon, 18 Feb 2019 08:58:27 +0000 (11:58 +0300)]
An additiona lcondition to avoid crash in some Abort cases

5 years agoCommenting on tests related to GDML
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Mon, 18 Feb 2019 08:18:32 +0000 (09:18 +0100)]
Commenting on tests related to GDML

5 years agoMerge branch 'master' of https://codev-tuleap.cea.fr/plugins/git/salome/shaper
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Fri, 15 Feb 2019 15:30:11 +0000 (16:30 +0100)]
Merge branch 'master' of https://codev-tuleap.cea.fr/plugins/git/salome/shaper

5 years agoCommenting on the GDML plugin
Clarisse GENRAULT - DEN/DANS/DM2S/STMF/LGLS - 2012/10/01 [Fri, 15 Feb 2019 15:29:41 +0000 (16:29 +0100)]
Commenting on the GDML plugin

5 years agoIssue #2865: Do not highlight a pre-selected shape
vsv [Fri, 15 Feb 2019 15:29:01 +0000 (18:29 +0300)]
Issue #2865: Do not highlight a pre-selected shape

5 years agoIssue #2862: Reset state of visibility if it was unsynchronized.
vsv [Fri, 15 Feb 2019 10:25:46 +0000 (13:25 +0300)]
Issue #2862: Reset state of visibility if it was unsynchronized.

5 years agoIssue #2863: Use Utf8 string for file selector
vsv [Fri, 15 Feb 2019 08:14:46 +0000 (11:14 +0300)]
Issue #2863: Use Utf8 string for file selector

5 years agoIssues #2850, #2860: Change type of angle while Python Dump, because the configuratio...
azv [Wed, 13 Feb 2019 12:14:57 +0000 (15:14 +0300)]
Issues #2850, #2860: Change type of angle while Python Dump, because the configuration of constrained lines may be changed by the subsequent constraints.

5 years agoFix for the issue #2859: Wrong update when changing a parameter value
mpv [Wed, 13 Feb 2019 12:39:38 +0000 (15:39 +0300)]
Fix for the issue #2859: Wrong update when changing a parameter value

5 years agoAn additional fix for the issue 2861 : Can't use a parameter created on the fly in...
mpv [Wed, 13 Feb 2019 11:20:34 +0000 (14:20 +0300)]
An additional fix for the issue 2861 : Can't use a parameter created on the fly in another parameter expression

5 years agoFix for the issue #2861. This issue 2861 is not a regression, but caused by order...
mpv [Wed, 13 Feb 2019 11:13:52 +0000 (14:13 +0300)]
Fix for the issue #2861. This issue 2861 is not a regression, but caused by order of parameters relative to other features. Here parameter l1 is created in sketch and when the sketch is current feature, new parameter was created just after, before l1.

5 years agoIssue #2856: Fatal error in sketcher Split when moving the mouse on a circle
azv [Tue, 12 Feb 2019 10:01:34 +0000 (13:01 +0300)]
Issue #2856: Fatal error in sketcher Split when moving the mouse on a circle

5 years agoCorrections and tests for the Fillet feature history: make generated faces present...
mpv [Tue, 12 Feb 2019 07:05:47 +0000 (10:05 +0300)]
Corrections and tests for the Fillet feature history: make generated faces present in the history as a generated named object

5 years agoAdded unit-tests for High Level Objects History task for features Compound, Common...
mpv [Mon, 11 Feb 2019 09:23:28 +0000 (12:23 +0300)]
Added unit-tests for High Level Objects History task for features Compound, Common, Cut, Smash, Partition

5 years agoAdded a Fuse unit-test for High Level Object Hierarchy task
mpv [Fri, 8 Feb 2019 16:55:19 +0000 (19:55 +0300)]
Added a Fuse unit-test for High Level Object Hierarchy task

5 years agoFix for the issue #2854 : Group of faces in error after modification of a sketch...
mpv [Fri, 8 Feb 2019 12:52:19 +0000 (15:52 +0300)]
Fix for the issue #2854 : Group of faces in error after modification of a sketch. Now an order of results of extrusion depend only on order of creation of sketch elements in selected sketch faces.

5 years agoFuse history of high level objects: workaround is implemented for the OCCT issue...
mpv [Thu, 7 Feb 2019 13:59:20 +0000 (16:59 +0300)]
Fuse history of high level objects: workaround is implemented for the OCCT issue 30841. Test for the issue 2826 is added.

5 years agoUnit test for the issue #2738 is added
mpv [Wed, 6 Feb 2019 12:45:41 +0000 (15:45 +0300)]
Unit test for the issue #2738 is added

5 years agoModifications cause by issue #2851 fix
mpv [Wed, 6 Feb 2019 08:11:43 +0000 (11:11 +0300)]
Modifications cause by issue #2851 fix

5 years agoFix for the issue #2851 : cloison07 dump produces an error
mpv [Tue, 5 Feb 2019 13:29:15 +0000 (16:29 +0300)]
Fix for the issue #2851 : cloison07 dump produces an error

5 years agoFix for the issue #2851 : cloison07 dump produces an error
mpv [Tue, 5 Feb 2019 13:29:15 +0000 (16:29 +0300)]
Fix for the issue #2851 : cloison07 dump produces an error

5 years agoOptimization for the naming structure loading in the issue 2636 model
mpv [Mon, 4 Feb 2019 14:56:28 +0000 (17:56 +0300)]
Optimization for the naming structure loading in the issue 2636 model

5 years agoOptimization for the naming structure loading in the issue 2636 model
mpv [Mon, 4 Feb 2019 14:07:01 +0000 (17:07 +0300)]
Optimization for the naming structure loading in the issue 2636 model

5 years agoFix in the unit-test for the updated Fillet feature modified faces naming.
mpv [Mon, 4 Feb 2019 08:20:03 +0000 (11:20 +0300)]
Fix in the unit-test for the updated Fillet feature modified faces naming.

5 years agoDebug of groups movement to the end for fillet feature unit-tests.
mpv [Fri, 1 Feb 2019 17:09:52 +0000 (20:09 +0300)]
Debug of groups movement to the end for fillet feature unit-tests.