]> SALOME platform Git repositories - modules/shaper.git/log
Salome HOME
modules/shaper.git
7 years agoImprove sketch performance while moving entities
azv [Thu, 27 Apr 2017 07:52:15 +0000 (10:52 +0300)]
Improve sketch performance while moving entities

7 years agoCorrection for case: create auxiliary cirle, try to create several lines coincident...
nds [Tue, 25 Apr 2017 12:46:03 +0000 (15:46 +0300)]
Correction for case: create auxiliary cirle, try to create several lines coincident to this circle. From third/fourth line coincidence of new line is moved to line created before previous one.

7 years agoIssue #2141 Sketch : horizontal constraint not applicated when I select a line
nds [Tue, 25 Apr 2017 12:03:46 +0000 (15:03 +0300)]
Issue #2141 Sketch : horizontal constraint not applicated when I select a line

7 years agoIssue #2133: Edge with middle node constraint can be moved
azv [Tue, 25 Apr 2017 08:31:09 +0000 (11:31 +0300)]
Issue #2133: Edge with middle node constraint can be moved

Move entities similar as FreeCAD (2 steps):
1. Initialize solver with initial positions of the feature and add temporary constraints.
2. Set new coordinates and then solve the set of constraints.

7 years agoAdded a new CSWA big model, created by DBC.
mpv [Mon, 24 Apr 2017 06:03:29 +0000 (09:03 +0300)]
Added a new CSWA big model, created by DBC.

7 years agoFix regressions in unit tests caused by previous change
azv [Mon, 24 Apr 2017 05:43:17 +0000 (08:43 +0300)]
Fix regressions in unit tests caused by previous change

7 years agoFix the frequently appeared "conflicting constraints" message when the point is coinc...
azv [Fri, 21 Apr 2017 15:12:39 +0000 (18:12 +0300)]
Fix the frequently appeared "conflicting constraints" message when the point is coincident with the feature and its extremity.

7 years agoIssue #2137: Synchronize active and module documents
vsv [Fri, 21 Apr 2017 14:29:21 +0000 (17:29 +0300)]
Issue #2137: Synchronize active and module documents

7 years agoIssue #2136: Update tree view on activation of a part
vsv [Fri, 21 Apr 2017 13:00:12 +0000 (16:00 +0300)]
Issue #2136: Update tree view on activation of a part

7 years agoIssue #2139: Lines attached to Extern lines can be moved
azv [Fri, 21 Apr 2017 11:38:46 +0000 (14:38 +0300)]
Issue #2139: Lines attached to Extern lines can be moved

Check the feature is a projection before converting it to the data structure applicable for the solver.

7 years agoFix for the issue #2132 : save current feature correctly for the composite features...
mpv [Tue, 18 Apr 2017 10:32:14 +0000 (13:32 +0300)]
Fix for the issue #2132 : save current feature correctly for the composite features, do not make nested features be active on open (this disables composites)

7 years agoPrepare version 2.7.0 V_2.7.0
mpv [Wed, 12 Apr 2017 14:11:50 +0000 (17:11 +0300)]
Prepare version 2.7.0

7 years agoIssue #2131 See preview button does not work
nds [Wed, 12 Apr 2017 13:29:04 +0000 (16:29 +0300)]
Issue #2131 See preview button does not work

7 years agoIssue #1220 Crash when creating an arc passing through the arc connected to both...
nds [Wed, 12 Apr 2017 13:13:55 +0000 (16:13 +0300)]
Issue #1220 Crash when creating an arc passing through the arc connected to both ends

7 years agoIssue #2130: arc is done not as desired
azv [Wed, 12 Apr 2017 10:16:32 +0000 (13:16 +0300)]
Issue #2130: arc is done not as desired

Fix problem with adjusting parameter to a period of a circle, the built arc is tangent

7 years agoIssue #2120 - Crash when creating an arc passing through the arc connected to both...
nds [Wed, 12 Apr 2017 10:03:42 +0000 (13:03 +0300)]
Issue #2120 - Crash when creating an arc passing through the arc connected to both ends

7 years agoIssue #2126: Fatal error when create fillet
azv [Wed, 12 Apr 2017 09:15:37 +0000 (12:15 +0300)]
Issue #2126: Fatal error when create fillet

Avoid to select point-on-entity as a fillet vertex

7 years agoAdjust arc intersection validator (issue #2120)
azv [Wed, 12 Apr 2017 08:31:07 +0000 (11:31 +0300)]
Adjust arc intersection validator (issue #2120)

7 years agoFix for the issue #2115
mpv [Wed, 12 Apr 2017 07:34:12 +0000 (10:34 +0300)]
Fix for the issue #2115

7 years agoFix for crash of unit-test TestCreateCircleByCenterAndPassed on Windows where it...
mpv [Wed, 12 Apr 2017 07:13:07 +0000 (10:13 +0300)]
Fix for crash of unit-test TestCreateCircleByCenterAndPassed on Windows where it tries to make a circle tangent to line that goes through the circle center.

7 years agoIssue #2129 Crash when clicking on Length after multiple selections
nds [Tue, 11 Apr 2017 16:29:46 +0000 (19:29 +0300)]
Issue #2129 Crash when clicking on Length after multiple selections

7 years agoIssue #2055 Import feature : the file type selector doesn't work
nds [Tue, 11 Apr 2017 15:04:50 +0000 (18:04 +0300)]
Issue #2055 Import feature : the file type selector doesn't work

7 years agoIssue #2122: Unexpected Sketcher behavior when creating Coincidence : Remove invalid...
nds [Tue, 11 Apr 2017 15:03:39 +0000 (18:03 +0300)]
Issue #2122: Unexpected Sketcher behavior when creating Coincidence : Remove invalid external feature

7 years agoFix for #2129 : even the resulting compound of edges is geometrically same, topology...
mpv [Tue, 11 Apr 2017 14:20:27 +0000 (17:20 +0300)]
Fix for #2129 : even the resulting compound of edges is geometrically same, topology may be different, so selected faces in sketch must be updated to use the same curves.

7 years agoIssue #2122: Unexpected Sketcher behavior when creating Coincidence : Preselection...
nds [Tue, 11 Apr 2017 13:36:35 +0000 (16:36 +0300)]
Issue #2122: Unexpected Sketcher behavior when creating Coincidence : Preselection is corrected.

7 years agoIssue #1058: Crash when creating a distance between source and translated elements
azv [Tue, 11 Apr 2017 12:26:04 +0000 (15:26 +0300)]
Issue #1058: Crash when creating a distance between source and translated elements

Show message about circular dependency for translated/rotated elements

7 years agoIssue #2127: arc disappears after move
azv [Tue, 11 Apr 2017 12:14:49 +0000 (15:14 +0300)]
Issue #2127: arc disappears after move

Workaround for Debian 8.0: project end point when building an arc

7 years agoIssue #2126: Fatal error when create fillet
azv [Tue, 11 Apr 2017 11:24:23 +0000 (14:24 +0300)]
Issue #2126: Fatal error when create fillet

Improve validator of the fillet vertex (should not be able to select already tangent features)

7 years agoIssue #2123: Unexpected Sketcher behavior when creating Coincidence
nds [Tue, 11 Apr 2017 11:08:10 +0000 (14:08 +0300)]
Issue #2123: Unexpected Sketcher behavior when creating Coincidence

7 years agoAdjust test cases for the Trim feature
azv [Tue, 11 Apr 2017 11:01:43 +0000 (14:01 +0300)]
Adjust test cases for the Trim feature

7 years agoIssue #2128: Fatal error when select arc
azv [Tue, 11 Apr 2017 10:17:21 +0000 (13:17 +0300)]
Issue #2128: Fatal error when select arc

Do not process tangent arcs/circles as entities with shared point if this point is a center.

7 years agoIssue #2123: Unexpected Sketcher behavior when creating Coincidence
nds [Tue, 11 Apr 2017 10:10:15 +0000 (13:10 +0300)]
Issue #2123: Unexpected Sketcher behavior when creating Coincidence

7 years agoIssue #2127: arc disappears after move
azv [Tue, 11 Apr 2017 08:58:11 +0000 (11:58 +0300)]
Issue #2127: arc disappears after move

Remove temporary constraints if the solver failed and then recalculate set of constraints once again.

7 years agoIssue #2121: Problems when editing a radius value
nds [Tue, 11 Apr 2017 04:59:33 +0000 (07:59 +0300)]
Issue #2121: Problems when editing a radius value

7 years agoIssue #2120: Crash when creating an arc passing through the arc connected to both...
azv [Mon, 10 Apr 2017 13:49:40 +0000 (16:49 +0300)]
Issue #2120: Crash when creating an arc passing through the arc connected to both ends

7 years agoIssue #2117: Problem when creating an arc by 3 points ending on the same circle
azv [Mon, 10 Apr 2017 13:03:28 +0000 (16:03 +0300)]
Issue #2117: Problem when creating an arc by 3 points ending on the same circle

7 years agoIssue #2116 Crash when Splitting a circle crossing external segments
nds [Mon, 10 Apr 2017 09:33:11 +0000 (12:33 +0300)]
Issue #2116 Crash when Splitting a circle crossing external segments

7 years agoFix for the issue #2115
mpv [Mon, 10 Apr 2017 08:00:18 +0000 (11:00 +0300)]
Fix for the issue #2115

7 years agoIssue #2112 performance for partition
nds [Fri, 7 Apr 2017 12:19:00 +0000 (15:19 +0300)]
Issue #2112 performance for partition

7 years agoExternal edges color should not be changed when sketch is fully constrained.
nds [Fri, 7 Apr 2017 12:02:11 +0000 (15:02 +0300)]
External edges color should not be changed when sketch is fully constrained.

7 years agoOrigin selection as Rotation center of Sketch Rotation feature.
nds [Fri, 7 Apr 2017 09:12:11 +0000 (12:12 +0300)]
Origin selection as Rotation center of Sketch Rotation feature.

7 years agoIssue #1671: Update default value for SALOME
vsv [Fri, 7 Apr 2017 09:00:14 +0000 (12:00 +0300)]
Issue #1671: Update default value for SALOME

7 years agoIssue #2111: Strange compsolid
dbv [Fri, 7 Apr 2017 08:37:22 +0000 (11:37 +0300)]
Issue #2111: Strange compsolid

Moved validation of selected objects for generation from attribute validator to feature validator.

7 years agoAvoid instability in "gear.py" test model
azv [Fri, 7 Apr 2017 07:45:04 +0000 (10:45 +0300)]
Avoid instability in "gear.py" test model

7 years agoIssue #2099 Multi-selection with Shift button works incorrect during partition
nds [Fri, 7 Apr 2017 06:07:29 +0000 (09:07 +0300)]
Issue #2099 Multi-selection with Shift button works incorrect during partition

7 years agoFix shape names for the "clothespin.py" model
azv [Fri, 7 Apr 2017 03:55:52 +0000 (06:55 +0300)]
Fix shape names for the "clothespin.py" model

7 years agoAdded test model.
dbv [Thu, 6 Apr 2017 15:25:11 +0000 (18:25 +0300)]
Added test model.

7 years agoRename test case for arc creating by three points
azv [Thu, 6 Apr 2017 14:49:06 +0000 (17:49 +0300)]
Rename test case for arc creating by three points

7 years agoUnit test for changing arc type during creation.
azv [Thu, 6 Apr 2017 14:36:56 +0000 (17:36 +0300)]
Unit test for changing arc type during creation.
Obsolete test case for arc has been removed.

7 years agoFixed crash when creating arc coinciding with already created arc.
dbv [Thu, 6 Apr 2017 14:23:45 +0000 (17:23 +0300)]
Fixed crash when creating arc coinciding with already created arc.

7 years agoAdded test for creation arc by three points
dbv [Thu, 6 Apr 2017 14:16:21 +0000 (17:16 +0300)]
Added test for creation arc by three points

7 years agoAdded test for creation arc by three points
dbv [Thu, 6 Apr 2017 14:14:59 +0000 (17:14 +0300)]
Added test for creation arc by three points

7 years agoIssue #2109 trim - wrong result due to constarints
nds [Thu, 6 Apr 2017 14:05:39 +0000 (17:05 +0300)]
Issue #2109 trim - wrong result due to constarints

7 years agoUnit test for creating arc by tangent edge
azv [Thu, 6 Apr 2017 13:42:30 +0000 (16:42 +0300)]
Unit test for creating arc by tangent edge

7 years agoIssue #2082 Sketch multiple rotation does not work as expected: debug information
nds [Thu, 6 Apr 2017 13:10:37 +0000 (16:10 +0300)]
Issue #2082 Sketch multiple rotation does not work as expected: debug information

7 years agoUpdate Arc unit test
azv [Thu, 6 Apr 2017 11:58:02 +0000 (14:58 +0300)]
Update Arc unit test

7 years agoUpdate Arc unit test
azv [Thu, 6 Apr 2017 11:27:08 +0000 (14:27 +0300)]
Update Arc unit test

7 years agoIssue #2106: Arc transformed in line problem
azv [Thu, 6 Apr 2017 11:26:38 +0000 (14:26 +0300)]
Issue #2106: Arc transformed in line problem

7 years agoUpdated model.
dbv [Thu, 6 Apr 2017 10:54:18 +0000 (13:54 +0300)]
Updated model.

7 years agoIssue #2061 arc edit problem: correction for center of arc(last described problem)
nds [Thu, 6 Apr 2017 10:17:24 +0000 (13:17 +0300)]
Issue #2061 arc edit problem: correction for center of arc(last described problem)

7 years agoRemoved Sketch DOF from checking at Python dump as it may be changed unexpectedly
dbv [Thu, 6 Apr 2017 08:57:01 +0000 (11:57 +0300)]
Removed Sketch DOF from checking at Python dump as it may be changed unexpectedly

7 years agoFixes for issue #1956 and issue #2104 : correctly remove features on part remove.
mpv [Thu, 6 Apr 2017 07:53:12 +0000 (10:53 +0300)]
Fixes for issue #1956 and issue #2104 : correctly remove features on part remove.

7 years agoIssue #2107 impossible to select segment for trim
nds [Thu, 6 Apr 2017 07:50:51 +0000 (10:50 +0300)]
Issue #2107 impossible to select segment for trim

7 years agoIssue #2079 : Select parent feature for default Constructions. Disable popup menu...
nds [Thu, 6 Apr 2017 07:00:15 +0000 (10:00 +0300)]
Issue #2079 : Select parent feature for default Constructions. Disable popup menu "Select parent feature" if feature of selected result in not history.

7 years agoIssue #2082: Sketch multiple rotation does not work as expected
azv [Thu, 6 Apr 2017 05:13:55 +0000 (08:13 +0300)]
Issue #2082: Sketch multiple rotation does not work as expected

Fix crash or restart Trim operation

7 years agoIssue #2097 Edit group with change of type does not work: undoes the previous modific...
nds [Wed, 5 Apr 2017 16:24:57 +0000 (19:24 +0300)]
Issue #2097 Edit group with change of type does not work: undoes the previous modification as clear cash will happens if control is active

7 years agoIssue #2076 Modification of selection list on "Edit"
nds [Wed, 5 Apr 2017 16:05:07 +0000 (19:05 +0300)]
Issue #2076 Modification of selection list on "Edit"

Modification for providing selection of the issue (approved by DBV)

7 years agoIssue #2097 Edit group with change of type does not work
nds [Wed, 5 Apr 2017 14:28:26 +0000 (17:28 +0300)]
Issue #2097 Edit group with change of type does not work

7 years agoFixed validator for Boolean feature.
dbv [Wed, 5 Apr 2017 14:23:57 +0000 (17:23 +0300)]
Fixed validator for Boolean feature.

7 years agoIssue #2089: Update current view scale on using of view size in sketch creation
vsv [Wed, 5 Apr 2017 14:00:10 +0000 (17:00 +0300)]
Issue #2089: Update current view scale on using of view size in sketch creation

7 years agoAdded new test model.
dbv [Wed, 5 Apr 2017 13:41:41 +0000 (16:41 +0300)]
Added new test model.

7 years agoAdded parameter to models to check recompute.
dbv [Wed, 5 Apr 2017 13:36:20 +0000 (16:36 +0300)]
Added parameter to models to check recompute.

7 years agoIssue #2102: Do not get object with Id of obsolete folder
vsv [Wed, 5 Apr 2017 13:20:59 +0000 (16:20 +0300)]
Issue #2102: Do not get object with Id of obsolete folder

7 years agoIssue #1948 multiply selection with Shift button pressed does not work
nds [Wed, 5 Apr 2017 12:55:20 +0000 (15:55 +0300)]
Issue #1948 multiply selection with Shift button pressed does not work

Regression correction, selection of dimensions leads to crash.

7 years agoIssue #1948 multiply selection with Shift button pressed does not work
nds [Wed, 5 Apr 2017 12:22:21 +0000 (15:22 +0300)]
Issue #1948 multiply selection with Shift button pressed does not work

It is important to use isSame instead of isEqual to check if shape is selected(came from owner)

7 years agoIssue #2101: A point cannot be coincident to both, X and Y axises
azv [Wed, 5 Apr 2017 12:09:41 +0000 (15:09 +0300)]
Issue #2101: A point cannot be coincident to both, X and Y axises

7 years agoFixed isEqual for GeomAPI_Face
dbv [Wed, 5 Apr 2017 12:01:50 +0000 (15:01 +0300)]
Fixed isEqual for GeomAPI_Face

7 years agoIssue 1974: Incorrect fillet after sketch modification
azv [Wed, 5 Apr 2017 11:37:41 +0000 (14:37 +0300)]
Issue 1974: Incorrect fillet after sketch modification

Avoid preparing presentation when Fillet is already or almost created

7 years agoFixes for issue #1936, issue #1956, issue #2035. Undo of Part delete restores the...
mpv [Wed, 5 Apr 2017 11:29:53 +0000 (14:29 +0300)]
Fixes for issue #1936, issue #1956, issue #2035. Undo of Part delete restores the part, but to go inside and make it filled, it is necessary to activate the part first.

7 years agoIssue #2095: Fillet with mirror produces a problem in solver
azv [Wed, 5 Apr 2017 10:50:10 +0000 (13:50 +0300)]
Issue #2095: Fillet with mirror produces a problem in solver

- Improve update of mirrored entities
- Adjust stack depth
- Unit test for the issue

7 years agoIssue #2082: Sketch multiple rotation does not work as expected
azv [Wed, 5 Apr 2017 07:58:58 +0000 (10:58 +0300)]
Issue #2082: Sketch multiple rotation does not work as expected

Avoid blocking features in PlaneGCSSolver for a long time.

7 years agoIssue #2059 point in sketch is created not on selected line of external sketchPlane...
nds [Wed, 5 Apr 2017 10:03:23 +0000 (13:03 +0300)]
Issue #2059 point in sketch is created not on selected line of external sketchPlane: lines symbols <= 100

7 years agoIssue #2059 point in sketch is created not on selected line of external sketchPlane...
nds [Wed, 5 Apr 2017 09:53:16 +0000 (12:53 +0300)]
Issue #2059 point in sketch is created not on selected line of external sketchPlane: should store/restore local selection if shape was not changed

7 years ago#2098 Selection is lost after drag sketch entity in viewer
nds [Wed, 5 Apr 2017 04:35:51 +0000 (07:35 +0300)]
#2098 Selection is lost after drag sketch entity in viewer

7 years agoWarning fix.
dbv [Wed, 5 Apr 2017 08:36:32 +0000 (11:36 +0300)]
Warning fix.

7 years agoIssue #2090: Line not selectable when creating an arc by its center
dbv [Wed, 5 Apr 2017 08:21:40 +0000 (11:21 +0300)]
Issue #2090: Line not selectable when creating an arc by its center

Fixed validator.

7 years agoIssue #1799 : export group sub-shape to GEOM even if context is concealed.
mpv [Wed, 5 Apr 2017 05:52:10 +0000 (08:52 +0300)]
Issue #1799 : export group sub-shape to GEOM even if context is concealed.

7 years agoIssue #2095: Fillet with mirror produces a problem in solver
azv [Wed, 5 Apr 2017 05:00:01 +0000 (08:00 +0300)]
Issue #2095: Fillet with mirror produces a problem in solver

Increased stack depth.

7 years agoIssue #2092: Middle constraint not removed when creating a fillet
dbv [Tue, 4 Apr 2017 14:35:02 +0000 (17:35 +0300)]
Issue #2092: Middle constraint not removed when creating a fillet

Now middle constraint removed when creating fillet.

7 years agoIssue #2090: Line not selectable when creating an arc by its center
dbv [Tue, 4 Apr 2017 14:11:04 +0000 (17:11 +0300)]
Issue #2090: Line not selectable when creating an arc by its center

Fixed arc validator.

7 years ago#2084 invalid sketch after trim: control of reentrant trim is filled only by message...
nds [Tue, 4 Apr 2017 13:47:47 +0000 (16:47 +0300)]
#2084 invalid sketch after trim: control of reentrant trim is filled only by message of trim feature

7 years ago#2084 Unknown error when trim: Do not copyAttribute
nds [Tue, 4 Apr 2017 12:48:25 +0000 (15:48 +0300)]
#2084 Unknown error when trim: Do not copyAttribute

7 years agoFixed crash when attribute External in feature Projection changed.
dbv [Tue, 4 Apr 2017 12:38:04 +0000 (15:38 +0300)]
Fixed crash when attribute External in feature Projection changed.

7 years agoIssue #2024 Redesign of circle and arc of circle: test correction(reason: center...
nds [Tue, 4 Apr 2017 12:00:39 +0000 (15:00 +0300)]
Issue #2024 Redesign of circle and arc of circle: test correction(reason: center attribute is always initialized)

7 years agoFix crash on Debian 8 when selecting center of circle while creation
azv [Tue, 4 Apr 2017 11:57:40 +0000 (14:57 +0300)]
Fix crash on Debian 8 when selecting center of circle while creation

7 years agoIssue #2052 : really remove results if during the feature execution number of results...
mpv [Tue, 4 Apr 2017 11:27:38 +0000 (14:27 +0300)]
Issue #2052 : really remove results if during the feature execution number of results becomes smaller.

7 years agoIssue #2024 Redesign of circle and arc of circle: message of reentrant Line should...
nds [Tue, 4 Apr 2017 11:23:11 +0000 (14:23 +0300)]
Issue #2024 Redesign of circle and arc of circle: message of reentrant Line should not be processed in Horizontal reentrant feature

7 years agoIssue #2067 crash when create circle with start point laying on existing circle ...
nds [Tue, 4 Apr 2017 09:46:40 +0000 (12:46 +0300)]
Issue #2067 crash when create circle with start point laying on existing circle : reentrant operation that uses circle' center as preselection for a new circle

7 years agoIssue #2027 Sketcher Trim Feature: unit-tests
nds [Tue, 4 Apr 2017 07:42:11 +0000 (10:42 +0300)]
Issue #2027 Sketcher Trim Feature: unit-tests

7 years agoIssue #2024 Redesign of circle and arc of circle : restart operation will not happen...
nds [Tue, 4 Apr 2017 05:49:30 +0000 (08:49 +0300)]
Issue #2024 Redesign of circle and arc of circle : restart operation will not happen if the previous cannot be committed. E.g. Line feature

Sometimes there is a crash by line restart if the previous Line creation is aborted: in processEvent of Line feature, where the attribute of previous created feature is used to build coincidence to start point of new feature Line.