]> SALOME platform Git repositories - modules/shaper.git/log
Salome HOME
modules/shaper.git
9 years agoFix (by NDS) for leaving sketch circle presentation problem: when change radius in...
mpv [Mon, 7 Sep 2015 13:18:29 +0000 (16:18 +0300)]
Fix (by NDS) for leaving sketch circle presentation problem: when change radius in the viewer and then - in the property panel.

9 years agoProcess "Move to the end" event
vsv [Mon, 7 Sep 2015 12:53:28 +0000 (15:53 +0300)]
Process "Move to the end" event

9 years agoProcess "Mode to end" event
vsv [Mon, 7 Sep 2015 11:17:40 +0000 (14:17 +0300)]
Process "Mode to end" event

9 years agoImprove performance of calculation of multi-translation constraint (issue #893)
azv [Mon, 7 Sep 2015 12:22:37 +0000 (15:22 +0300)]
Improve performance of calculation of multi-translation constraint (issue #893)

9 years agoFix SQUISH tests
spo [Mon, 7 Sep 2015 12:17:28 +0000 (15:17 +0300)]
Fix SQUISH tests

9 years agoMake reordered event not grouped
mpv [Mon, 7 Sep 2015 12:17:47 +0000 (15:17 +0300)]
Make reordered event not grouped

9 years agoProcessing "Move to the end" event
vsv [Mon, 7 Sep 2015 09:31:32 +0000 (12:31 +0300)]
Processing "Move to the end" event

9 years agoIssue #910: Do not replace text in spin box if it is not changed
vsv [Mon, 7 Sep 2015 09:30:32 +0000 (12:30 +0300)]
Issue #910: Do not replace text in spin box if it is not changed

9 years agoIssue #807: Show/hide commands have to be accessible only for current part and constr...
vsv [Mon, 7 Sep 2015 08:14:38 +0000 (11:14 +0300)]
Issue #807: Show/hide commands have to be accessible only for current part and constructions in PartSet

9 years agoForgotten initialization of the Distance constraint field (issue #874)
azv [Mon, 7 Sep 2015 08:16:23 +0000 (11:16 +0300)]
Forgotten initialization of the Distance constraint field (issue #874)

9 years agoSort constraints before adding it to the solver (issue #911)
azv [Mon, 7 Sep 2015 07:54:58 +0000 (10:54 +0300)]
Sort constraints before adding it to the solver (issue #911)

9 years agodisplayAllResults is obsolete
nds [Mon, 7 Sep 2015 06:00:06 +0000 (09:00 +0300)]
displayAllResults is obsolete

9 years agoThis code is obsolete, the planes are erased either by plane selecting or in deactiva...
nds [Mon, 7 Sep 2015 05:48:13 +0000 (08:48 +0300)]
This code is obsolete, the planes are erased either by plane selecting or in deactivate() of this widget.

9 years agoResult preview is low for the point. The updateViewer() should be blocked in moveObje...
nds [Mon, 7 Sep 2015 04:59:29 +0000 (07:59 +0300)]
Result preview is low for the point. The updateViewer() should be blocked in moveObject() like it is done in updateObject()

9 years agoTemporary workaroud of crash in SALOME study, happens by closing document.
nds [Mon, 7 Sep 2015 04:17:29 +0000 (07:17 +0300)]
Temporary workaroud of crash in SALOME study, happens by closing document.

9 years agoTemporary workaroud of crash in SALOME study, happens by closing document.
nds [Sun, 6 Sep 2015 15:13:17 +0000 (18:13 +0300)]
Temporary workaroud of crash in SALOME study, happens by closing document.

9 years agoOperation Prs: green preview is low. Scenario: Sketch, Start Circle, 1st Click, move...
nds [Sun, 6 Sep 2015 13:49:46 +0000 (16:49 +0300)]
Operation Prs: green preview is low. Scenario: Sketch, Start Circle, 1st Click, move to PP, input R=80, Activate 1st control, Input value. Result: the presentation is not redisplayed. Reason: in onFeatureUpdateMsg UpdateViewer() should be called.

9 years agoOperationPrs: do not visualize parameters of feature, if they are not inCase. Example...
nds [Sun, 6 Sep 2015 11:08:48 +0000 (14:08 +0300)]
OperationPrs: do not visualize parameters of feature, if they are not inCase. Example: Extrusion, select a plane in the 2nd choice, activate 1st choice, the plane should not be marked in the viewer.

9 years agoTake into account folders which can not be shown empty when history updated
vsv [Fri, 4 Sep 2015 16:35:28 +0000 (19:35 +0300)]
Take into account folders which can not be shown empty when history updated

9 years agoCreated a new event that features were reordered due to the "move to end" action
mpv [Fri, 4 Sep 2015 15:51:53 +0000 (18:51 +0300)]
Created a new event that features were reordered due to the "move to end" action

9 years agoIf moved feature comes below current feature then it has to be current feature
vsv [Fri, 4 Sep 2015 15:37:12 +0000 (18:37 +0300)]
If moved feature comes below current feature then it has to be current feature

9 years agoIssue #807: Disable Show/Hide commands for objects from non-active document
vsv [Fri, 4 Sep 2015 15:36:22 +0000 (18:36 +0300)]
Issue #807: Disable Show/Hide commands for objects from non-active document

9 years agoMake sketch lines more selectable (selection area is increased)
mpv [Fri, 4 Sep 2015 14:48:47 +0000 (17:48 +0300)]
Make sketch lines more selectable (selection area is increased)

9 years agoFix: SketchPlugin_Sketch::SOLVER_ERROR() should be obligatory
spo [Fri, 4 Sep 2015 14:28:11 +0000 (17:28 +0300)]
Fix: SketchPlugin_Sketch::SOLVER_ERROR() should be obligatory

9 years agoIssue #504 - 1.17. Error user feedback when a feature fail
spo [Fri, 4 Sep 2015 13:41:24 +0000 (16:41 +0300)]
Issue #504 - 1.17. Error user feedback when a feature fail

9 years agoMake moved groups update their results
mpv [Fri, 4 Sep 2015 13:40:17 +0000 (16:40 +0300)]
Make moved groups update their results

9 years agoPartition naming for infinite planes
dbv [Fri, 4 Sep 2015 13:20:29 +0000 (16:20 +0300)]
Partition naming for infinite planes

9 years agoFix for issue #889
mpv [Fri, 4 Sep 2015 11:48:56 +0000 (14:48 +0300)]
Fix for issue #889

9 years agoCompillation correction
nds [Fri, 4 Sep 2015 11:36:32 +0000 (14:36 +0300)]
Compillation correction

9 years agoAdd error descriptions for some feture and attribute validators
spo [Fri, 4 Sep 2015 11:17:02 +0000 (14:17 +0300)]
Add error descriptions for some feture and attribute validators

9 years agoSpell-checking
spo [Fri, 4 Sep 2015 09:45:51 +0000 (12:45 +0300)]
Spell-checking

9 years agoMake error messages shorter
spo [Fri, 4 Sep 2015 09:45:29 +0000 (12:45 +0300)]
Make error messages shorter

9 years agoCheck a case when created object can be canceled
vsv [Fri, 4 Sep 2015 09:53:18 +0000 (12:53 +0300)]
Check a case when created object can be canceled

9 years agoUsing og non initialized value
vsv [Thu, 3 Sep 2015 15:16:00 +0000 (18:16 +0300)]
Using og non initialized value

9 years agoMerge branch 'Dev_1.4.0' of newgeom:newgeom into Dev_1.4.0
mpv [Fri, 4 Sep 2015 08:52:24 +0000 (11:52 +0300)]
Merge branch 'Dev_1.4.0' of newgeom:newgeom into Dev_1.4.0

9 years agoUndo the regression: optimization makes the sketch instable
mpv [Fri, 4 Sep 2015 08:52:08 +0000 (11:52 +0300)]
Undo the regression: optimization makes the sketch instable

9 years agoIssue #807: disable the show/hide actions if the part set document is not active
asl [Fri, 4 Sep 2015 08:25:08 +0000 (11:25 +0300)]
Issue #807: disable the show/hide actions if the part set document is not active

9 years agoMerge branch 'Dev_1.4.0' of newgeom:newgeom into Dev_1.4.0
mpv [Fri, 4 Sep 2015 07:26:33 +0000 (10:26 +0300)]
Merge branch 'Dev_1.4.0' of newgeom:newgeom into Dev_1.4.0

9 years agoOptimization for big sketched (from unit tests)
mpv [Fri, 4 Sep 2015 07:26:11 +0000 (10:26 +0300)]
Optimization for big sketched (from unit tests)

9 years agoAdded sketch attribute selection for composite features
dbv [Fri, 4 Sep 2015 06:52:27 +0000 (09:52 +0300)]
Added sketch attribute selection for composite features

9 years agoFix for other than bodies results renaming and issue #908
mpv [Fri, 4 Sep 2015 05:29:26 +0000 (08:29 +0300)]
Fix for other than bodies results renaming and issue #908

9 years agoFir for issue #899: all results now have "_index" suffix, including the first one.
mpv [Thu, 3 Sep 2015 13:56:12 +0000 (16:56 +0300)]
Fir for issue #899: all results now have "_index" suffix, including the first one.

9 years agoFix for the issue #869: more user-friendly names of attributes
mpv [Thu, 3 Sep 2015 13:32:09 +0000 (16:32 +0300)]
Fix for the issue #869: more user-friendly names of attributes

9 years agoDebug of update of feature that need no preview
mpv [Thu, 3 Sep 2015 13:23:50 +0000 (16:23 +0300)]
Debug of update of feature that need no preview

9 years agoFix for extrusion creation
dbv [Thu, 3 Sep 2015 12:39:05 +0000 (15:39 +0300)]
Fix for extrusion creation

9 years agoImprove Linux scripts
spo [Thu, 3 Sep 2015 11:39:53 +0000 (14:39 +0300)]
Improve Linux scripts

9 years agoImprove Linux scripts
spo [Thu, 3 Sep 2015 11:34:24 +0000 (14:34 +0300)]
Improve Linux scripts

9 years agoImprove Linux scripts
spo [Thu, 3 Sep 2015 11:31:54 +0000 (14:31 +0300)]
Improve Linux scripts

9 years agoMake the partition selection of plane correctly named, since it is used in the later...
mpv [Thu, 3 Sep 2015 11:14:32 +0000 (14:14 +0300)]
Make the partition selection of plane correctly named, since it is used in the later naming structures

9 years agoFix for the problem of update of BOP created on CompSolid every time (like Group...
mpv [Thu, 3 Sep 2015 09:21:05 +0000 (12:21 +0300)]
Fix for the problem of update of BOP created on CompSolid every time (like Group objects selection)

9 years agoRevolution: returned previous algo for simple faces
dbv [Thu, 3 Sep 2015 08:39:23 +0000 (11:39 +0300)]
Revolution: returned previous algo for simple faces

9 years agoFix for a crash: Create sketch, circle, Radius constraint with 0 value.
nds [Thu, 3 Sep 2015 08:39:15 +0000 (11:39 +0300)]
Fix for a crash: Create sketch, circle, Radius constraint with 0 value.

It appends a positive value validator in order to solver is not performed when the value is not valid.

9 years agoDebug of naming of Boolean operation of extrusion and revolution results.
mpv [Thu, 3 Sep 2015 08:38:14 +0000 (11:38 +0300)]
Debug of naming of Boolean operation of extrusion and revolution results.

9 years agoDo not recalculate constraints if there are invalid features (issue #874)
azv [Thu, 3 Sep 2015 08:22:33 +0000 (11:22 +0300)]
Do not recalculate constraints if there are invalid features (issue #874)

9 years agoExtrusion returned previous algo for simple faces.
dbv [Thu, 3 Sep 2015 08:05:59 +0000 (11:05 +0300)]
Extrusion returned previous algo for simple faces.

9 years agoSupport of attributes located in the same switch in several cases
mpv [Thu, 3 Sep 2015 06:26:28 +0000 (09:26 +0300)]
Support of attributes located in the same switch in several cases

9 years agoFix for a crash: Create sketch, circle, Radius constraint with 0 value.
nds [Thu, 3 Sep 2015 04:39:09 +0000 (07:39 +0300)]
Fix for a crash: Create sketch, circle, Radius constraint with 0 value.

9 years agoOptimize and debug the updater
mpv [Wed, 2 Sep 2015 17:14:21 +0000 (20:14 +0300)]
Optimize and debug the updater

9 years agoApplication crashes during sketching (issue #872)
azv [Wed, 2 Sep 2015 14:05:33 +0000 (17:05 +0300)]
Application crashes during sketching (issue #872)

Multi-coincidence with external point was implemented

9 years agoFix suite_ISSUES_SALOME - tst_sketch_003,4,6,12,13,14,15,16,18
spo [Wed, 2 Sep 2015 12:54:57 +0000 (15:54 +0300)]
Fix suite_ISSUES_SALOME - tst_sketch_003,4,6,12,13,14,15,16,18

9 years agoAdd data for test sketch_018
eso [Wed, 2 Sep 2015 12:28:41 +0000 (15:28 +0300)]
Add data for test sketch_018

9 years agoUpdate the procedure of removing entities not used by constraints (issue #883)
azv [Wed, 2 Sep 2015 11:27:22 +0000 (14:27 +0300)]
Update the procedure of removing entities not used by constraints (issue #883)

9 years agoCode optimization of multi-rotation and multi-translation in SketchSolver
azv [Wed, 2 Sep 2015 09:22:33 +0000 (12:22 +0300)]
Code optimization of multi-rotation and multi-translation in SketchSolver

9 years agoAvoid hang-up on coincidence points and rotated arcs (issue #883)
azv [Wed, 2 Sep 2015 07:40:40 +0000 (10:40 +0300)]
Avoid hang-up on coincidence points and rotated arcs (issue #883)

9 years agoModification of distance constraint changes the line direction (issue #874)
azv [Tue, 1 Sep 2015 10:53:06 +0000 (13:53 +0300)]
Modification of distance constraint changes the line direction (issue #874)

9 years agoFix multiple SQUSIH tests
spo [Wed, 2 Sep 2015 11:10:25 +0000 (14:10 +0300)]
Fix multiple SQUSIH tests

9 years agorefs #821: correct orientation of the viewer after the plane selection
asl [Wed, 2 Sep 2015 09:19:10 +0000 (12:19 +0300)]
refs #821: correct orientation of the viewer after the plane selection

9 years agoIssue #862: new implementation of operations abort on save
asl [Tue, 1 Sep 2015 07:09:59 +0000 (10:09 +0300)]
Issue #862: new implementation of operations abort on save

9 years agoImprovement #615: Widgets position in Extrusion and Rotation features must be changed.
dbv [Wed, 2 Sep 2015 08:57:23 +0000 (11:57 +0300)]
Improvement #615: Widgets position in Extrusion and Rotation features must be changed.

9 years agoFix suite_ISSUES_SALOME/tst_boolean_001,2,3 with new colors
spo [Wed, 2 Sep 2015 08:32:54 +0000 (11:32 +0300)]
Fix suite_ISSUES_SALOME/tst_boolean_001,2,3 with new colors

9 years agoUpdate suite_ISSUES/tst_PARALLEL_2, suite_ISSUES_SALOME/tst_532
spo [Wed, 2 Sep 2015 07:49:16 +0000 (10:49 +0300)]
Update suite_ISSUES/tst_PARALLEL_2, suite_ISSUES_SALOME/tst_532

9 years agoFix suite_ISSUES/tst_PARALLEL_2
spo [Wed, 2 Sep 2015 06:39:44 +0000 (09:39 +0300)]
Fix suite_ISSUES/tst_PARALLEL_2

9 years agoBug #781: The placement dialog box is not user friendly
dbv [Tue, 1 Sep 2015 14:52:25 +0000 (17:52 +0300)]
Bug #781: The placement dialog box is not user friendly

9 years agoAnnotate suite_ISSUES/tst_818
spo [Tue, 1 Sep 2015 14:44:44 +0000 (17:44 +0300)]
Annotate suite_ISSUES/tst_818

9 years agoIcons update for revolution
dbv [Tue, 1 Sep 2015 14:04:39 +0000 (17:04 +0300)]
Icons update for revolution

9 years agoImprove Linux scripts: remove warning
spo [Tue, 1 Sep 2015 13:57:47 +0000 (16:57 +0300)]
Improve Linux scripts: remove warning

9 years agoReturned edges and vertexes as start and end shapes in placement.
dbv [Tue, 1 Sep 2015 13:52:51 +0000 (16:52 +0300)]
Returned edges and vertexes as start and end shapes in placement.

9 years agoUpdate of icons
mpv [Tue, 1 Sep 2015 13:40:11 +0000 (16:40 +0300)]
Update of icons

9 years agoImprove vnc script: indicate errors on start vncserver.
spo [Tue, 1 Sep 2015 13:20:21 +0000 (16:20 +0300)]
Improve vnc script: indicate errors on start vncserver.

9 years agoVisualize feature result in green when the create/edit operation for the feature...
nds [Tue, 1 Sep 2015 13:21:23 +0000 (16:21 +0300)]
Visualize feature result in green when the create/edit operation for the feature is started.

9 years agoBug #887: ExtrusionCut, ExtrusionFuse, RevolutionCut, RevolutionFuse – impossible...
dbv [Tue, 1 Sep 2015 13:11:14 +0000 (16:11 +0300)]
Bug #887: ExtrusionCut, ExtrusionFuse, RevolutionCut, RevolutionFuse – impossible to set negative offset

9 years agoMake parts of compsolids unselectable if whole compsolid is selected
dbv [Tue, 1 Sep 2015 13:07:08 +0000 (16:07 +0300)]
Make parts of compsolids unselectable if whole compsolid is selected

9 years agoIssue #738 select point by mouse change predefined coordinates of connected object
nds [Tue, 1 Sep 2015 09:09:16 +0000 (12:09 +0300)]
Issue #738 select point by mouse change predefined coordinates of connected object

nestedFeature, distance2Point are obsolete.

9 years agoIssue #850 Flyout property panel: sketch features can not be created by clicking...
nds [Tue, 1 Sep 2015 06:31:07 +0000 (09:31 +0300)]
Issue #850 Flyout property panel: sketch features can not be created by clicking in the viewer

Additionaly the next regression is corrected: sketch, contour, translation, select lines with a rectangle[move over some lines], click Tab, waiting result-the next control in PP is activated, but it has not happened.

9 years agoTooltips update for extrusion and revolution
dbv [Tue, 1 Sep 2015 08:48:02 +0000 (11:48 +0300)]
Tooltips update for extrusion and revolution

9 years agoPartition naming
dbv [Tue, 1 Sep 2015 08:38:13 +0000 (11:38 +0300)]
Partition naming

9 years agoSend messages if the sketch is failed to solve or solved correctly
azv [Tue, 1 Sep 2015 08:20:47 +0000 (11:20 +0300)]
Send messages if the sketch is failed to solve or solved correctly

9 years agoNew design of icons
mpv [Tue, 1 Sep 2015 06:13:27 +0000 (09:13 +0300)]
New design of icons

9 years agoDefault color of the body to be lighter, in order to sketch of the exrusion to be...
nds [Tue, 1 Sep 2015 05:00:10 +0000 (08:00 +0300)]
Default color of the body to be lighter, in order to sketch of the exrusion to be more visible.

9 years agoThe same, as in onEnterViewPort(): validation of the operation should be pefromed...
nds [Mon, 31 Aug 2015 16:57:11 +0000 (19:57 +0300)]
The same, as in onEnterViewPort(): validation of the operation should be pefromed only in create sketch entity case. Otherwise it influence performance.

9 years agoThe correction, to do not create a line by click in the viewer if the second click...
nds [Mon, 31 Aug 2015 16:34:46 +0000 (19:34 +0300)]
The correction, to do not create a line by click in the viewer if the second click happens in the area of the first point. The first point has a coincidence to the previous point(sketch contour).

9 years agoCompsolids in boolean operations
dbv [Thu, 27 Aug 2015 07:51:16 +0000 (10:51 +0300)]
Compsolids in boolean operations

9 years agoFix tests 532 boolean_001,2,3 construction_001 extrusion_001,2,3,4,6 partition_001...
spo [Mon, 31 Aug 2015 14:19:22 +0000 (17:19 +0300)]
Fix tests 532 boolean_001,2,3 construction_001 extrusion_001,2,3,4,6 partition_001 revolution_001,3,4,5,6

9 years agoImprove LCOV scripts
spo [Mon, 31 Aug 2015 13:09:14 +0000 (16:09 +0300)]
Improve LCOV scripts

9 years agoIssue #850: focus to property panel
asl [Mon, 31 Aug 2015 12:02:32 +0000 (15:02 +0300)]
Issue #850: focus to property panel

9 years agoIssue #862: abort operations on save
asl [Fri, 28 Aug 2015 04:51:01 +0000 (07:51 +0300)]
Issue #862: abort operations on save

9 years agoFix suite_ISSUES/tst_c
spo [Mon, 31 Aug 2015 12:01:25 +0000 (15:01 +0300)]
Fix suite_ISSUES/tst_c

9 years agoAdd GCOV to Linux scripts
spo [Mon, 31 Aug 2015 12:00:17 +0000 (15:00 +0300)]
Add GCOV to Linux scripts

9 years agoIssue #854 Fillet angle modification redisplay the presentation twice
nds [Mon, 31 Aug 2015 10:23:31 +0000 (13:23 +0300)]
Issue #854 Fillet angle modification redisplay the presentation twice

EVENT_OBJECT_TO_REDISPLAY is not necessary because it is sent by model when it processes EVENT_OBJECT_UPDATED.
In order to avoid the bug, the current decision is to do not redraw OCC viewer until the message is processed.

9 years agoIssue #787 Segmentation fault when setting distance on the two same point
nds [Mon, 31 Aug 2015 09:35:29 +0000 (12:35 +0300)]
Issue #787 Segmentation fault when setting distance on the two same point