nds [Tue, 12 Apr 2016 13:28:41 +0000 (16:28 +0300)]
Issue #1383 Preview button: correction for the case: switch off auto_preview in extrusion, start extrusion, select sketch, enter height=0, click Enter to validate it, Apply is still green.
mpv [Tue, 12 Apr 2016 12:49:05 +0000 (15:49 +0300)]
Make the feature with "preview" button updates the property panel "Apply" button correctly.
nds [Tue, 12 Apr 2016 12:41:11 +0000 (15:41 +0300)]
Issue #1383 Preview button: store modified value before See preview
mpv [Tue, 12 Apr 2016 11:59:41 +0000 (14:59 +0300)]
Merge branch 'master' of salome:modules/shaper
mpv [Tue, 12 Apr 2016 11:58:57 +0000 (14:58 +0300)]
Fix for the issue #1085
nds [Tue, 12 Apr 2016 11:57:20 +0000 (14:57 +0300)]
Issue #1383 Preview button: compilation correction on Linux
nds [Tue, 12 Apr 2016 11:47:16 +0000 (14:47 +0300)]
Issue #1383 Preview button: using Config_FeatureMessage instead of list of parameters in SALOME mode.
nds [Tue, 12 Apr 2016 10:54:32 +0000 (13:54 +0300)]
Issue #1383 Preview button: using Config_FeatureMessage instead of list of parameters.
mpv [Tue, 12 Apr 2016 10:24:00 +0000 (13:24 +0300)]
Issue #1383 Preview button: implementation on the Updater level
nds [Tue, 12 Apr 2016 08:18:26 +0000 (11:18 +0300)]
Issue #1383 Preview button: providing the Preview button, which sends signals to the model. Currently this is only for extrusion feature.
mpv [Tue, 12 Apr 2016 07:01:56 +0000 (10:01 +0300)]
In the frames of stopping the update cycling.
mpv [Tue, 12 Apr 2016 06:18:42 +0000 (09:18 +0300)]
Stop the infinitive cycling loop in update if bad dependencies graph presented in the tree.
mpv [Mon, 11 Apr 2016 13:38:48 +0000 (16:38 +0300)]
Fix for unit tests
mpv [Mon, 11 Apr 2016 13:08:54 +0000 (16:08 +0300)]
Fixes for crashes and bad behavior on delete of features and Parts. For now delete of Part with content crashes the application (problem in OB).
nds [Mon, 11 Apr 2016 12:35:37 +0000 (15:35 +0300)]
Issue #1393. An attempt to make infinite lines and use the edges' direction vectors.
nds [Mon, 11 Apr 2016 10:14:14 +0000 (13:14 +0300)]
Issue #1299, #1393. The presentation should not be changed automatically by distance value update from the first edges points to the center. The flag is introduced in OCCT presentation. Case: in the #1393 after input of value 55 degree, the AIS presentation is incorrect place.
dbv [Mon, 11 Apr 2016 08:13:22 +0000 (11:13 +0300)]
PythonAPI fix
dbv [Mon, 11 Apr 2016 08:02:47 +0000 (11:02 +0300)]
Commented PythonAPI Extrusion and Revolution tests
nds [Mon, 11 Apr 2016 05:58:39 +0000 (08:58 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: correction for case: create Sketch, create Extrusion on the sketch, delete Sketch, Ok, crash.
nds [Mon, 11 Apr 2016 04:53:58 +0000 (07:53 +0300)]
Issue #1393 Angle constraint : incorrect angle displayed. solution: arc's passed point correction
dbv [Fri, 8 Apr 2016 15:32:33 +0000 (18:32 +0300)]
Issue #1385: Fixed GeomAlgoAPI_ShapeTools::volume
dbv [Fri, 8 Apr 2016 14:41:38 +0000 (17:41 +0300)]
Test fixes
nds [Fri, 8 Apr 2016 11:10:37 +0000 (14:10 +0300)]
Issue #1393 Angle constraint : incorrect angle displayed. solution: arc's passed point correction
nds [Fri, 8 Apr 2016 08:20:42 +0000 (11:20 +0300)]
Issue #1393 Angle constraint : incorrect angle displayed. solution: do not select any object in the viewer when passed through point widget is active. This commit is a validator creator for such widgets(a candidate to replace WidgetValidated). It is used now for Distance of Circle widget and Flyout point of dimensional constraints. The next integration is for the bug purpose(arc's passed point)
nds [Fri, 8 Apr 2016 08:20:22 +0000 (11:20 +0300)]
Issue #1393 Angle constraint : incorrect angle displayed. solution: do not select any object in the viewer when passed through point widget is active. This commit is a validator creator for such widgets(a candidate to replace WidgetValidated). It is used now for Distance of Circle widget and Flyout point of dimensional constraints. The next integration is for the bug purpose(arc's passed point)
dbv [Fri, 8 Apr 2016 08:19:47 +0000 (11:19 +0300)]
Fixes for naming in revolution
nds [Fri, 8 Apr 2016 05:56:05 +0000 (08:56 +0300)]
Issue 1299 angle constraint: final correction to calculate reverse state in SketcherPrs by product of scalar. Providing corresponded method in AIS_AngleDimension. It is ready to be integrated as a patch for OCCT.
dbv [Thu, 7 Apr 2016 16:46:51 +0000 (19:46 +0300)]
Extrusion fix
dbv [Thu, 7 Apr 2016 16:36:56 +0000 (19:36 +0300)]
Pipe validator fix
dbv [Thu, 7 Apr 2016 15:38:24 +0000 (18:38 +0300)]
Removed unused fields from pipe algo
dbv [Thu, 7 Apr 2016 15:38:24 +0000 (18:38 +0300)]
Removed unused fields from pipe algo
mpv [Thu, 7 Apr 2016 15:21:28 +0000 (18:21 +0300)]
Fix the fang up on selection of trihedron point and axes in the sketch
dbv [Thu, 7 Apr 2016 15:08:06 +0000 (18:08 +0300)]
Issue #1343 Revolution fixes
nds [Thu, 7 Apr 2016 13:41:45 +0000 (16:41 +0300)]
Issue 1299 angle constraint: support of additional and complementary angles: value correction
nds [Thu, 7 Apr 2016 10:42:38 +0000 (13:42 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: correction for case: face selection(global) should not start a new Sketch creation.
nds [Thu, 7 Apr 2016 10:11:14 +0000 (13:11 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: correction for case: plane selection filter is ignored in Sketch started under Extrusion
dbv [Thu, 7 Apr 2016 09:35:18 +0000 (12:35 +0300)]
Compilation fix. Validator fix.
dbv [Thu, 7 Apr 2016 09:11:20 +0000 (12:11 +0300)]
Issue #1343 Fixes
nds [Thu, 7 Apr 2016 09:07:50 +0000 (12:07 +0300)]
Correction for case: Clean history should be disabled on features in diactivated parts
mpv [Thu, 7 Apr 2016 09:07:45 +0000 (12:07 +0300)]
Issue #1306: correct detection of the feature but sub-shape selection
nds [Thu, 7 Apr 2016 08:43:56 +0000 (11:43 +0300)]
Correction for case: Start Arc, select "2 points type", move mouse in viewer, result: crash(in background mode)
nds [Thu, 7 Apr 2016 08:43:31 +0000 (11:43 +0300)]
Correction for case: Start Arc, select "2 points type", move mouse in viewer, result: crash(in background mode)
vsv [Thu, 7 Apr 2016 08:16:53 +0000 (11:16 +0300)]
Issue #1126: Highlight results by feature
nds [Thu, 7 Apr 2016 07:09:53 +0000 (10:09 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: correction for case: create Extrusion with a construction Plane selected as a bounding plane(From/To); edit extrusion. Problem: is is not possible to deselect the plane by click in viewer.
nds [Wed, 6 Apr 2016 16:07:21 +0000 (19:07 +0300)]
Issue #1348 Creation of a Qt panel: providing additional sample for ModuleBase_ModelWidget using.
dbv [Wed, 6 Apr 2016 16:03:54 +0000 (19:03 +0300)]
Issue #1343 Revolution fixes
nds [Wed, 6 Apr 2016 16:01:55 +0000 (19:01 +0300)]
Issue #1348 Creation of a Qt panel: providing additional sample for ModuleBase_ModelWidget using.
nds [Wed, 6 Apr 2016 15:54:28 +0000 (18:54 +0300)]
ModuleBase_ViewerPrs is wrapped into shared_ptr: remove include of this class from headers.
nds [Wed, 6 Apr 2016 15:26:49 +0000 (18:26 +0300)]
ModuleBase_ViewerPrs is wrapped into shared_ptr: remove include of this class from headers.
nds [Wed, 6 Apr 2016 15:04:08 +0000 (18:04 +0300)]
ModuleBase_ViewerPrs is wrapped into shared_ptr.
nds [Wed, 6 Apr 2016 14:53:20 +0000 (17:53 +0300)]
ModuleBase_ViewerPrs is wrapped into shared_ptr.
mpv [Wed, 6 Apr 2016 14:39:13 +0000 (17:39 +0300)]
Fix for the delete of extrusion created on some sketch crash
vsv [Wed, 6 Apr 2016 14:27:35 +0000 (17:27 +0300)]
Issue #1306: Find Feature by history from result and shape
dbv [Wed, 6 Apr 2016 13:56:09 +0000 (16:56 +0300)]
Composite features fix.
vsv [Wed, 6 Apr 2016 14:10:43 +0000 (17:10 +0300)]
Issue #1306: Provide selection preferences in SHAPER module
mpv [Wed, 6 Apr 2016 14:01:57 +0000 (17:01 +0300)]
Creation of producedByFeature initial implementation neede for the issue #1306
nds [Wed, 6 Apr 2016 13:35:43 +0000 (16:35 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: transaction correction: sketch creation is sketch transaction(was: sketch in extrusion, edit sketch transaction), disable/enable selection control in widget sketch creator.
vsv [Wed, 6 Apr 2016 13:01:26 +0000 (16:01 +0300)]
Fix compilation errors
vsv [Wed, 6 Apr 2016 12:20:21 +0000 (15:20 +0300)]
Issue #1306: Set default selection mode at neutral point in local selection
nds [Wed, 6 Apr 2016 10:47:06 +0000 (13:47 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: compilation correction
nds [Wed, 6 Apr 2016 10:17:46 +0000 (13:17 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: filling extrusion list by the sub-feature in Widget sketch creator.
dbv [Wed, 6 Apr 2016 09:34:37 +0000 (12:34 +0300)]
Issue #1343 Fixes for naming when creating extrusion from vertex or edge
nds [Tue, 5 Apr 2016 14:42:59 +0000 (17:42 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: setSketchObjectToList is perfomed on the GUI level. Reason: if execute is started before, there is a crash if sketch contains only one not-closed contour.
dbv [Tue, 5 Apr 2016 14:13:40 +0000 (17:13 +0300)]
Issue #1343 Fixes
dbv [Tue, 5 Apr 2016 11:57:19 +0000 (14:57 +0300)]
Issue #1343 Extrusion fixes
nds [Tue, 5 Apr 2016 11:54:49 +0000 (14:54 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: sketch creator setSelection in two ways(Sketch or Selection list), so the validators should be checked in the same manner, in two ways(call validator for Sektch after(if invalid) validator for Selection list).
nds [Tue, 5 Apr 2016 09:26:01 +0000 (12:26 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: sketch creator setSelection in two ways(Sketch or Selection list), so the validators should be checked in the same manner, in two ways(call validator for Sektch after(if invalid) validator for Selection list).
dbv [Tue, 5 Apr 2016 07:54:07 +0000 (10:54 +0300)]
Issue #1343 Fixes for creating extrusion on vertex
nds [Tue, 5 Apr 2016 06:20:59 +0000 (09:20 +0300)]
#1371 Using auxilliary Sketch elements in any Feature: construction default line width should be equal 2, not 3.
dbv [Tue, 5 Apr 2016 06:20:02 +0000 (09:20 +0300)]
#Issue 1343 Fixes for extrusion creation
nds [Tue, 5 Apr 2016 06:19:05 +0000 (09:19 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: in Axis construction creation it is not possible to select points.
dbv [Tue, 5 Apr 2016 05:44:30 +0000 (08:44 +0300)]
Issue #1343 validators update
nds [Mon, 4 Apr 2016 13:22:25 +0000 (16:22 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: Open saved study, activate part, start extrusion, Crash. Additionaly the validation for attribute selection is called in widget sketch creator.
nds [Mon, 4 Apr 2016 12:16:39 +0000 (15:16 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: Create Sketch, Extrusion on the sketch, Save/Open -> crash.
nds [Mon, 4 Apr 2016 08:06:32 +0000 (11:06 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: Clean History on Extrusion.
nds [Mon, 4 Apr 2016 05:35:19 +0000 (08:35 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: Clean History, as Delete, should be disabled on Sketch created under an Extrusion.
nds [Mon, 4 Apr 2016 05:19:54 +0000 (08:19 +0300)]
Issue #1343. Improvement of Extrusion and Revolution operations: Bug correction: start Extrusion, select plane, abort Sketch, move over plane. Error message is about modification out of transaction.
dbv [Fri, 1 Apr 2016 12:46:56 +0000 (15:46 +0300)]
Issue #1343: Architecture changes. Composite features now derived from extrusion, revolution features.
nds [Tue, 29 Mar 2016 13:56:24 +0000 (16:56 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: correction for the bug: there was a crash on using: <box></box>, if <box/> is used, the result is correct. The reason is that there are not elements in the construction. This will be used in the Pipe feature.
nds [Mon, 28 Mar 2016 12:52:47 +0000 (15:52 +0300)]
#1371 Using auxilliary Sketch elements in any Feature: isSketchMode is removed from ModuleBase_ResultPrs.
nds [Mon, 28 Mar 2016 10:00:42 +0000 (13:00 +0300)]
#1371 Using auxilliary Sketch elements in any Feature: sketch always has a preview in order to see auxiliary/construction elements in the viewer.
nds [Mon, 28 Mar 2016 09:43:21 +0000 (12:43 +0300)]
#1371 Using auxilliary Sketch elements in any Feature: code improvement to separate setting presentation style.
nds [Mon, 28 Mar 2016 09:32:08 +0000 (12:32 +0300)]
#1371 Using auxilliary Sketch elements in any Feature: we need to use setColor instead of SetColor in order to AIS_Shape use the color as own union color.
nds [Mon, 28 Mar 2016 07:32:45 +0000 (10:32 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: extrusion by preselection
nds [Mon, 28 Mar 2016 07:22:37 +0000 (10:22 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: extrusion by preselection
nds [Fri, 25 Mar 2016 16:38:19 +0000 (19:38 +0300)]
#1371 Using auxilliary Sketch elements in any Feature
nds [Fri, 25 Mar 2016 16:37:40 +0000 (19:37 +0300)]
#1371 Using auxilliary Sketch elements in any Feature
nds [Fri, 25 Mar 2016 16:20:11 +0000 (19:20 +0300)]
#1371 Using auxilliary Sketch elements in any Feature
mpv [Fri, 25 Mar 2016 14:02:32 +0000 (17:02 +0300)]
Make wires selection on sketch result updated correctly
nds [Fri, 25 Mar 2016 09:13:23 +0000 (12:13 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: wires selection.
nds [Thu, 24 Mar 2016 08:49:22 +0000 (11:49 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: removeFeature is corrected to remove Sketch from reference; extrusion/revolution sketches are hidden; display is flushed after sketch hide in the sketch operation widget.
nds [Thu, 24 Mar 2016 07:35:35 +0000 (10:35 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: revolution/revolution cut/revolution fuse.
nds [Thu, 24 Mar 2016 06:29:57 +0000 (09:29 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: extrusion cut.
nds [Wed, 23 Mar 2016 17:23:14 +0000 (20:23 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: use transaction to avoid warning about modification model outside of a transaction.
nds [Wed, 23 Mar 2016 17:16:46 +0000 (20:16 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: delete of inappropriate sketch for extrusion.
nds [Tue, 22 Mar 2016 14:20:06 +0000 (17:20 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: preview planes should be erased by operation abort.
nds [Tue, 22 Mar 2016 13:18:17 +0000 (16:18 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: preview planes visualization if there are not bodies in the viewer.
nds [Tue, 22 Mar 2016 12:03:43 +0000 (15:03 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: plane selection in OB.
nds [Tue, 22 Mar 2016 11:47:04 +0000 (14:47 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: multi-selector control accepts focus after initial extrusion
selection.
nds [Tue, 22 Mar 2016 11:28:44 +0000 (14:28 +0300)]
Issue #1343 Improvement of Extrusion and Revolution operations: sketcher start or extrusion filling by selection.