From: eap Date: Wed, 6 Jun 2012 13:00:33 +0000 (+0000) Subject: 0021546: EDF 2129 GEOM: Different behavior btw circle and exploded base edge of a... X-Git-Tag: V6_6_0a1~118 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=ed2c8fe24cd17a7898dc5ca43b76842153a21d41;p=modules%2Fgeom.git 0021546: EDF 2129 GEOM: Different behavior btw circle and exploded base edge of a cylinder the base face must be planar for BRepFeat_MakeDPrism --- diff --git a/src/GEOMImpl/GEOMImpl_PrismDriver.cxx b/src/GEOMImpl/GEOMImpl_PrismDriver.cxx index 5a21f3b06..87b18275d 100644 --- a/src/GEOMImpl/GEOMImpl_PrismDriver.cxx +++ b/src/GEOMImpl/GEOMImpl_PrismDriver.cxx @@ -450,10 +450,11 @@ TopoDS_Shape GEOMImpl_PrismDriver::MakeDraftPrism ( const TopoDS_Shape& theInitS if (!aWire.Closed()) Standard_ConstructionError::Raise("The input profile is not closed"); - // Construction of the face if the wire hasn't any support face - TopoDS_Face aFaceBase = BRepBuilderAPI_MakeFace(aWire); + // Construction of the face if the wire hasn't any support face; + // the face must be planar for BRepFeat_MakeDPrism + TopoDS_Face aFaceBase = BRepBuilderAPI_MakeFace(aWire, /*OnlyPlane=*/true); - if(!theSupport.IsNull() && theSupport.ShapeType() == TopAbs_FACE) // If the wire has a support + if(!theSupport.IsNull() && theSupport.ShapeType() == TopAbs_FACE) // If the wire has a support { Handle(Geom_Surface) aSurf = BRep_Tool::Surface(TopoDS::Face(theSupport)); TopoDS_Face aTempFace = BRepBuilderAPI_MakeFace(aSurf, aWire); @@ -481,8 +482,8 @@ TopoDS_Shape GEOMImpl_PrismDriver::MakeDraftPrism ( const TopoDS_Shape& theInitS aHeight = -theHeight; } - BRepFeat_MakeDPrism aPrism(theInitShape, aFaceBase, TopoDS_Face(), - anAngle*M_PI/180., isProtrusion, Standard_True); + BRepFeat_MakeDPrism aPrism(theInitShape, aFaceBase, aFaceBase, + anAngle*M_PI/180., isProtrusion, Standard_True); aPrism.Perform(aHeight); aPrism.Check(); // Raises NotDone if done is false