From: azv Date: Sun, 26 Nov 2017 10:36:46 +0000 (+0300) Subject: Issue #2299: Wrong face support of sketch in script from python dump X-Git-Tag: V_2.10.0RC~141 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=d0f078983d5f74d45a6f28b3a4dfe8feadb2cdf7;p=modules%2Fshaper.git Issue #2299: Wrong face support of sketch in script from python dump Adjust test cases to fix problems with the edge enumeration. --- diff --git a/src/CollectionPlugin/Test/TestGroup1799.py b/src/CollectionPlugin/Test/TestGroup1799.py index d048d7b4a..5d67a8fd4 100644 --- a/src/CollectionPlugin/Test/TestGroup1799.py +++ b/src/CollectionPlugin/Test/TestGroup1799.py @@ -116,11 +116,11 @@ SketchConstraintEqual_5 = Sketch_1.setEqual(SketchLine_7.result(), SketchLine_2. model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2r-SketchLine_5f-SketchLine_6f-SketchLine_9r-SketchLine_10r"), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchCircle_1_2r-SketchLine_7f-SketchLine_9f-SketchLine_12r"), model.selection("FACE", "Sketch_1/Face-SketchLine_4f-SketchCircle_1_2r-SketchLine_8f-SketchLine_11r-SketchLine_12f"), model.selection("FACE", "Sketch_1/Face-SketchLine_2f-SketchLine_3f-SketchCircle_1_2r-SketchLine_10f-SketchLine_11f")], model.selection(), 150, 0) Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_1/To_Face_1"), model.selection("FACE", "Extrusion_1_1/To_Face_4"), model.selection("FACE", "Extrusion_1_1/To_Face_3"), model.selection("FACE", "Extrusion_1_1/To_Face_2")]) -Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), 150, True) +Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_15"), 150, True) Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"), 150, True) Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Plane_1"), model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Plane_2")]) Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Partition_1_1_7/Modified_Face_2_4"), 110, True) -Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Partition_1_1_3/Modified_Face_3_5"), 380, True) +Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Partition_1_1_5/Modified_Face_3_4"), 380, True) Partition_2 = model.addPartition(Part_1_doc, [model.selection("FACE", "Plane_3"), model.selection("COMPSOLID", "Partition_1_1"), model.selection("FACE", "Plane_4")]) model.do() diff --git a/src/FeaturesPlugin/Test/Test2197_3.py b/src/FeaturesPlugin/Test/Test2197_3.py index e07e3e154..6ce089431 100644 --- a/src/FeaturesPlugin/Test/Test2197_3.py +++ b/src/FeaturesPlugin/Test/Test2197_3.py @@ -36,7 +36,7 @@ SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint()) model.do() Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), 360, 0) -Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Lateral_Edge_4"), model.selection("EDGE", "Revolution_1_1/Base_Edge_2"), model.selection("EDGE", "Revolution_1_1/Lateral_Edge_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_1"), model.selection("EDGE", "Revolution_1_1/Base_Edge_3")]) +Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Lateral_Edge_3"), model.selection("EDGE", "Revolution_1_1/Base_Edge_2"), model.selection("EDGE", "Revolution_1_1/Lateral_Edge_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_1"), model.selection("EDGE", "Revolution_1_1/Base_Edge_3")]) model.end() # check that resulting group selection is valid diff --git a/src/FeaturesPlugin/Test/Test2197_4.py b/src/FeaturesPlugin/Test/Test2197_4.py index 9ebe471a7..d68bbf00c 100644 --- a/src/FeaturesPlugin/Test/Test2197_4.py +++ b/src/FeaturesPlugin/Test/Test2197_4.py @@ -52,7 +52,7 @@ SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_7") model.do() Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5r-SketchLine_6r")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), 360, 0) -Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Generated_Face_5&Revolution_1_1/Generated_Face_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_3&Revolution_1_1/Generated_Face_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_2")]) +Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Generated_Face_5&Revolution_1_1/Generated_Face_4"), model.selection("EDGE", "Revolution_1_1/Generated_Face_4&Revolution_1_1/Generated_Face_3"), model.selection("EDGE", "Revolution_1_1/Generated_Face_3&Revolution_1_1/Generated_Face_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_4"), model.selection("EDGE", "Revolution_1_1/Generated_Face_3")]) model.end() # check that resulting group selection is valid diff --git a/src/FeaturesPlugin/Test/Test2240.py b/src/FeaturesPlugin/Test/Test2240.py index 5d629f65d..bab4cc8ba 100644 --- a/src/FeaturesPlugin/Test/Test2240.py +++ b/src/FeaturesPlugin/Test/Test2240.py @@ -106,7 +106,7 @@ Group_2.result().setName("acier") Group_2.result().setColor(170, 85, 0) Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY")) SketchLine_11 = Sketch_3.addLine(40, 0, 30, 0) -SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "Partition_1_1_1/Modified_Edge_15_18&Partition_1_1_1/Modified_Edge_15_17")) +SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "Partition_1_1_1/Modified_Edge_15_15&Partition_1_1_1/Modified_Edge_15_16")) SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result()) SketchLine_12 = Sketch_3.addLine(30, 0, 30, 10) SketchLine_13 = Sketch_3.addLine(30, 10, 40, 10) diff --git a/src/FeaturesPlugin/Test/Test2248.py b/src/FeaturesPlugin/Test/Test2248.py index 89f15dd57..20e48f5b9 100644 --- a/src/FeaturesPlugin/Test/Test2248.py +++ b/src/FeaturesPlugin/Test/Test2248.py @@ -48,7 +48,7 @@ SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc SketchCircle_1 = Sketch_1.addCircle(-13.45056286489504, 169.4770920976776, 150.6703210346195) model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0) -Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_9"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_6"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/Generated_Face_9"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7")]) +Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_9"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_7"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/Generated_Face_9"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7")]) model.end() # check that resulting group selection is valid diff --git a/src/FeaturesPlugin/Test/TestExtrusion.py b/src/FeaturesPlugin/Test/TestExtrusion.py index 4d3daea44..5e44cac12 100644 --- a/src/FeaturesPlugin/Test/TestExtrusion.py +++ b/src/FeaturesPlugin/Test/TestExtrusion.py @@ -250,9 +250,9 @@ anExtrusionFt.selectionList("base").append( anExtrusionFt.string("CreationMethod").setValue("ByPlanesAndOffsets") anExtrusionFt.real("to_size").setValue(0) #TODO: remove anExtrusionFt.real("from_size").setValue(0) #TODO: remove -anExtrusionFt.selection("to_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_2") +anExtrusionFt.selection("to_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_3") anExtrusionFt.real("to_offset").setValue(0) -anExtrusionFt.selection("from_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_1") +anExtrusionFt.selection("from_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_4") anExtrusionFt.real("from_offset").setValue(0) anExtrusionFt.execute() aSession.finishOperation() diff --git a/src/ModelAPI/Test/Test1064.py b/src/ModelAPI/Test/Test1064.py index d94163a19..bd2599e08 100644 --- a/src/ModelAPI/Test/Test1064.py +++ b/src/ModelAPI/Test/Test1064.py @@ -93,7 +93,7 @@ aSession.setActiveDocument(aPartSet) aPlane = aPartSet.addFeature("Plane") aPlane.string("creation_method").setValue("by_other_plane") aPlane.string("by_other_plane_option").setValue("by_distance_from_other") -aPlane.selection("plane").selectSubShape("face", "Part_1/Extrusion_1_1/Generated_Face_1") +aPlane.selection("plane").selectSubShape("face", "Part_1/Extrusion_1_1/Generated_Face_2") aPlane.real("distance").setValue(0.001) aPlane.boolean("reverse").setValue(False) aSession.finishOperation() diff --git a/src/ModelAPI/Test/Test1757.py b/src/ModelAPI/Test/Test1757.py index 8c300a578..431f7300d 100644 --- a/src/ModelAPI/Test/Test1757.py +++ b/src/ModelAPI/Test/Test1757.py @@ -125,6 +125,6 @@ import ModelAPI assert(ModelAPI.ModelAPI_Session.get().validators().validate(Sketch_4.feature())) assert(ModelAPI.ModelAPI_Session.get().validators().validate(ExtrusionCut_2.feature())) -assert(Sketch_3.feature().selection("External").namingName() == "Extrusion_1_1/Modfied_6") +assert(Sketch_3.feature().selection("External").namingName() == "_Extrusion_1_1/Modfied_4") assert(model.checkPythonDump()) diff --git a/src/ModelAPI/Test/Test2241.py b/src/ModelAPI/Test/Test2241.py index 89c8a70ee..dd5e5f869 100644 --- a/src/ModelAPI/Test/Test2241.py +++ b/src/ModelAPI/Test/Test2241.py @@ -99,7 +99,7 @@ Face_3 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-Sketc Face_4 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_2_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_5_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_7_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_6_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_9_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_8_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_10_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_12_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_11_2"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")]) Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY")) SketchLine_11 = Sketch_3.addLine(40, 0, 30, 0) -SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "Face_1_1/Edge_4&Face_1_1/Edge_5")) +SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "Face_1_1/Edge_6&Face_1_1/Edge_7")) SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result()) SketchLine_12 = Sketch_3.addLine(30, 0, 30, 10) SketchLine_13 = Sketch_3.addLine(30, 10, 40, 10) @@ -121,19 +121,19 @@ model.do() Face_5 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_14r")]) MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "PartSet/OX"), "l", 4, model.selection("EDGE", "PartSet/OY"), "l", 2) Recover_1 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()]) -Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_1_1")], model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"), model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7")) +Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_1_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5")) Translation_1.result().setName("Translation_1_1") MultiTranslation_2 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_1_1")], model.selection("EDGE", "PartSet/OX"), "l", 4, model.selection("EDGE", "PartSet/OY"), "l", 2) Recover_2 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()]) -Translation_2 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_2_1")], model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"), model.selection("VERTEX", "Face_4_1/Edge_8&Face_4_1/Edge_9")) +Translation_2 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_2_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_2&Face_4_1/Edge_3")) Translation_2.result().setName("Translation_2_1") MultiTranslation_3 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_2_1")], model.selection("EDGE", "PartSet/OX"), "l", 4) Recover_3 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()]) -Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"), model.selection("VERTEX", "Translation_2_1/Translated_Edge_1_4&Translation_2_1/Translated_Edge_1_1")) +Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Translation_2_1/Translated_Edge_1_4&Translation_2_1/Translated_Edge_1_3")) Translation_3.result().setName("Translation_3_1") MultiTranslation_4 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_3_1")], model.selection("EDGE", "PartSet/OX"), "l", 3) Recover_4 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()]) -Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"), model.selection("VERTEX", "Face_4_1/Edge_1&Face_4_1/Edge_2")) +Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_1&Face_4_1/Edge_9")) Translation_4.result().setName("Translation_4_1") MultiTranslation_5 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_4_1")], model.selection("EDGE", "PartSet/OX"), "l", 2) Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "MultiTranslation_4_1_2"), model.selection("FACE", "MultiTranslation_1_1_8"), model.selection("FACE", "MultiTranslation_1_1_4"), model.selection("FACE", "MultiTranslation_1_1_3"), model.selection("FACE", "MultiTranslation_1_1_6"), model.selection("FACE", "MultiTranslation_1_1_2"), model.selection("FACE", "MultiTranslation_1_1_7"), model.selection("FACE", "MultiTranslation_2_1_3"), model.selection("FACE", "MultiTranslation_3_1_4"), model.selection("FACE", "MultiTranslation_2_1_8"), model.selection("FACE", "MultiTranslation_2_1_4"), model.selection("FACE", "MultiTranslation_2_1_7"), model.selection("FACE", "MultiTranslation_4_1_3"), model.selection("FACE", "MultiTranslation_1_1_1"), model.selection("FACE", "MultiTranslation_5_1_2"), model.selection("FACE", "MultiTranslation_4_1_1"), model.selection("FACE", "MultiTranslation_5_1_1"), model.selection("FACE", "MultiTranslation_3_1_3"), model.selection("FACE", "MultiTranslation_3_1_2"), model.selection("FACE", "MultiTranslation_3_1_1"), model.selection("FACE", "MultiTranslation_2_1_6"), model.selection("FACE", "MultiTranslation_2_1_2"), model.selection("FACE", "MultiTranslation_2_1_5"), model.selection("FACE", "MultiTranslation_2_1_1"), model.selection("FACE", "MultiTranslation_1_1_5")]) diff --git a/src/ModelAPI/Test/TestCustomName_Placement.py b/src/ModelAPI/Test/TestCustomName_Placement.py index 2d86f757d..b8cd116e4 100644 --- a/src/ModelAPI/Test/TestCustomName_Placement.py +++ b/src/ModelAPI/Test/TestCustomName_Placement.py @@ -46,7 +46,7 @@ Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/ Extrusion_1.result().setName("prism") Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_5r-SketchLine_6r-SketchLine_7r")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"), 360, 0) Revolution_1.result().setName("spinner") -Placement_1 = model.addPlacement(Part_1_doc, [model.selection("SOLID", "spinner")], model.selection("VERTEX", "spinner/Lateral_Edge_1&spinner/Base_Edge_2"), model.selection("FACE", "prism/Generated_Face_1"), False, True) +Placement_1 = model.addPlacement(Part_1_doc, [model.selection("SOLID", "spinner")], model.selection("VERTEX", "spinner/Lateral_Edge_1&spinner/Base_Edge_1"), model.selection("FACE", "prism/Generated_Face_2"), False, True) model.do() assert(Placement_1.result().name() == Revolution_1.result().name()), "Placement name '{}' != '{}'".format(Placement_1.result().name(), Revolution_1.result().name()) diff --git a/src/PythonAPI/examples/Platine.py b/src/PythonAPI/examples/Platine.py index 32428becf..800ce0e05 100644 --- a/src/PythonAPI/examples/Platine.py +++ b/src/PythonAPI/examples/Platine.py @@ -132,7 +132,7 @@ def bottom_body(): def body_3(): # Create XOZ sketch - sketch = model.addSketch(part, "Boolean_1_1/Modified_2") + sketch = model.addSketch(part, "Boolean_1_1/Modified_3") # Create base polygon H, L, l, r = 28, 40, 8, 12 @@ -170,7 +170,7 @@ def body_3(): sketch.setRadius(arc, r) # Binding - bottom_e = sketch.addLine("Boolean_1_1/Modified_7&Boolean_1_1/Modified_5") + bottom_e = sketch.addLine("Boolean_1_1/Modified_8&Boolean_1_1/Modified_5") sketch.setCoincident(bottom_e, bottom.startPoint()) sketch.setCoincident(bottom_e.startPoint(), bottom.endPoint()) @@ -196,7 +196,7 @@ def body_4(): sketch.setCoincident(bottom_e.endPoint(), bottom.startPoint()) sketch.setCoincident(bottom_e.startPoint(), left.startPoint()) - left_e = sketch.addLine("Boolean_2_1/Modified_6&Boolean_2_1/Modified_8") + left_e = sketch.addLine("Boolean_2_1/Modified_6&Boolean_2_1/Modified_7") sketch.setCoincident(left_e.startPoint(), left.endPoint()) model.do() #!!! diff --git a/src/SketchPlugin/Test/TestProjectionIntoResult.py b/src/SketchPlugin/Test/TestProjectionIntoResult.py index 6ec5968e5..adfd8ebcc 100644 --- a/src/SketchPlugin/Test/TestProjectionIntoResult.py +++ b/src/SketchPlugin/Test/TestProjectionIntoResult.py @@ -95,19 +95,19 @@ aProjectedList = [("EDGE", "Sketch_1/Edge-SketchCircle_1_2"), ("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"), # ("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_1"), - ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"), + ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1"), ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_1"), - ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), + ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"), # - ("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1"), - ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2"), - ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3"), + ("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3"), + ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"), ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1"), + ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3"), # ("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"), - ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"), + ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_1"), - ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1") + ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1") ] # Test projection to the same plane @@ -129,12 +129,12 @@ Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To testProjections(Part_1_doc, Sketch_6, aProjectedList, aFailedIDs) # Test projection to orthogonal side face of the prism -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1")) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3")) aFailedIDs = set([0, 1, 18, 20, 26, 28]) testProjections(Part_1_doc, Sketch_7, aProjectedList, aFailedIDs) # Test projection to slope side face of the prism -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3")) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1")) aFailedIDs = set([0, 1]) testProjections(Part_1_doc, Sketch_8, aProjectedList, aFailedIDs) diff --git a/test.API/SHAPER/Primitives/TestBox.py b/test.API/SHAPER/Primitives/TestBox.py index 95e76725b..772056c0a 100644 --- a/test.API/SHAPER/Primitives/TestBox.py +++ b/test.API/SHAPER/Primitives/TestBox.py @@ -82,7 +82,7 @@ Box_12 = model.addBox(Part_1_doc, Point_1, Point_5) Box_13 = model.addBox(Part_1_doc, Vertex_3, Point_2) Box_14 = model.addBox(Part_1_doc, Point_2, Vertex_3) Box_15 = model.addBox(Part_1_doc, model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_4e"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_7s-SketchLine_6e")) -Box_16 = model.addBox(Part_1_doc, model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1")) +Box_16 = model.addBox(Part_1_doc, model.selection("VERTEX", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/Generated_Face_2&Extrusion_2_1/To_Face_1")) Box_17 = model.addBox(Part_1_doc, model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_2_1")) Box_18 = model.addBox(Part_1_doc, "dx", "dy", "dz") model.do() diff --git a/test.models/CSWA.py b/test.models/CSWA.py index cc859057d..7029f1396 100644 --- a/test.models/CSWA.py +++ b/test.models/CSWA.py @@ -95,7 +95,7 @@ SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15") model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchLine_10f-SketchArc_1_2r-SketchArc_2_2r")], model.selection(), "b/2", "b/2") Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1")) -SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_1")) +SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1")) SketchCircle_1 = Sketch_2.addCircle(-15, 35.00000000000001, 25) SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchCircle_1.center()) SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16") @@ -104,14 +104,14 @@ model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")]) ExtrusionCut_1.result().setName("ExtrusionCut_1_1") Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4")) -SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4")) -SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4")) +SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4")) +SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4")) SketchArc_3 = Sketch_3.addArc(-15, 35.00000000000001, -15, 46.0103340429751, -17.02045759563166, 24.17663606626138, True) SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchPoint_3.result(), SketchArc_3.center()) SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17") SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_11.result(), SketchArc_3.startPoint()) SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18") -SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4")) +SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4")) SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchArc_4.results()[1]) SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19") SketchLine_12 = Sketch_3.addLine(-15, 46.0103340429751, -15, 35.00000000000001) @@ -130,7 +130,7 @@ model.do() ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_3_2f-SketchLine_12f-SketchArc_5_2r")], model.selection(), 5, 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1") Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face_1")) -SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionFuse_1_1/Modfied_5&ExtrusionFuse_1_1/Modfied_4&ExtrusionFuse_1_1/To_Face_1")) +SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionFuse_1_1/Modfied_4&ExtrusionFuse_1_1/Modfied_5&ExtrusionFuse_1_1/To_Face_1")) SketchCircle_2 = Sketch_4.addCircle(-15, 35.00000000000001, 5) SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchCircle_2.center()) SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25") @@ -169,13 +169,13 @@ model.do() ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchLine_13r-SketchArc_9_2r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")]) ExtrusionFuse_3.result().setName("ExtrusionFuse_3_1") Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modfied_3")) -SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_5")) +SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7")) SketchArc_10 = Sketch_6.addArc(55, 35, 55, 15, 35, 35, True) SketchConstraintCoincidence_34 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.center()) SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35") SketchConstraintCoincidence_35 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.startPoint()) SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36") -SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_4")) +SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_8")) SketchConstraintDistance_8 = Sketch_6.setDistance(SketchArc_10.center(), SketchLine_15.result(), 35) SketchLine_16 = Sketch_6.addLine(35, 35, 35, 48) SketchConstraintCoincidence_36 = Sketch_6.setCoincident(SketchArc_10.endPoint(), SketchLine_16.startPoint()) @@ -201,7 +201,7 @@ ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Ske ExtrusionCut_2.result().setName("ExtrusionCut_2_1") Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_4")) SketchCircle_4 = Sketch_7.addCircle(45, 35, 5) -SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_1&ExtrusionCut_2_1/Modfied_4")) +SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/Modfied_4")) SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10) SketchConstraintRadius_6 = Sketch_7.setRadius(SketchCircle_4.results()[1], "10/2") SketchLine_21 = Sketch_7.addLine(35, 35, 45, 35) @@ -215,7 +215,7 @@ SketchConstraintHorizontal_4 = Sketch_7.setHorizontal(SketchLine_21.result()) model.do() ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) ExtrusionCut_3.result().setName("ExtrusionCut_3_1") -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8")) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4")) SketchLine_22 = Sketch_8.addLine(55, 25, 5.000000000000002, 25) SketchLine_23 = Sketch_8.addLine(5.000000000000002, 25, 5.000000000000002, 13) SketchLine_24 = Sketch_8.addLine(5.000000000000002, 13, 55, 13) @@ -234,15 +234,15 @@ SketchConstraintHorizontal_6 = Sketch_8.setHorizontal(SketchLine_24.result()) SketchConstraintVertical_8 = Sketch_8.setVertical(SketchLine_25.result()) SketchConstraintLength_2 = Sketch_8.setLength(SketchLine_22.result(), 50) SketchConstraintLength_3 = Sketch_8.setLength(SketchLine_25.result(), 12) -SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_1&ExtrusionCut_2_1/Modfied_2")) +SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/Modfied_1")) SketchLine_26 = SketchProjection_1.createdFeature() SketchConstraintCoincidence_48 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_26.result()) SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_49") -SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&Extrusion_1_1/Generated_Face_8")) +SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&Extrusion_1_1/Generated_Face_4")) SketchConstraintCoincidence_49 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_27.result()) SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50") model.do() -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) ExtrusionCut_4.result().setName("ExtrusionCut_4_1") Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modfied_2")) SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320836, -63) diff --git a/test.models/angle30.py b/test.models/angle30.py index 14fbe4b70..8bed73f7c 100644 --- a/test.models/angle30.py +++ b/test.models/angle30.py @@ -498,18 +498,18 @@ Boolean_5.result().setName("Boolean_5_1") Boolean_6 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_5_1")], [model.selection("SOLID", "Boolean_3_1")]) Boolean_6.result().setName("Boolean_6_1") Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_7")) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_1")) SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60) SketchLine_54.setName("SketchLine_66") SketchLine_54.result().setName("SketchLine_66") -SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/To_Face_1")) +SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/To_Face_1")) SketchLine_55 = Sketch_7.addLine(55, -9.237604307034024, 55, -70) SketchLine_55.setName("SketchLine_57") SketchLine_55.result().setName("SketchLine_57") SketchLine_55.setAuxiliary(True) SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchPoint_6.result()) SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_95") -SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/To_Face_1")) +SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/To_Face_1")) SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchPoint_7.result()) SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_96") SketchLine_56 = Sketch_7.addLine(45.00000000000001, -70, -45.00000000000001, -70) @@ -521,7 +521,7 @@ SketchLine_57.result().setName("SketchLine_58") SketchLine_57.setAuxiliary(True) SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchLine_57.startPoint()) SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_97") -SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/From_Face_1")) +SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/From_Face_1")) SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchPoint_8.result()) SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_98") SketchLine_58 = Sketch_7.addLine(-55.00000000000001, -59.99999999999999, -55, -9.237604307034024) @@ -531,7 +531,7 @@ SketchLine_59 = Sketch_7.addLine(-55, -70, -55, -9.237604307034024) SketchLine_59.setAuxiliary(True) SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint()) SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_99") -SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/From_Face_1")) +SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/From_Face_1")) SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_9.result()) SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_100") SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -61.32702426187202, -9.237604307034024) @@ -611,7 +611,7 @@ SketchConstraintRadius_15 = Sketch_7.setRadius(SketchCircle_6.results()[1], 5) SketchCircle_7 = Sketch_7.addCircle(-44, -20.23760430703402, 5) SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5) SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11) -SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6")) +SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1")) SketchLine_66.setName("SketchLine_69") SketchLine_66.result().setName("SketchLine_69") SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11) @@ -620,18 +620,18 @@ SketchConstraintDistance_34 = Sketch_7.setDistance(SketchCircle_7.center(), Sket model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")]) ExtrusionCut_1.result().setName("ExtrusionCut_1_1") -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_5")) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_3")) SketchLine_67 = Sketch_8.addLine(55, -34.06366588218793, 55, 66.69872981077805) SketchLine_67.setName("SketchLine_79") SketchLine_67.result().setName("SketchLine_79") -SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_5")) +SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3")) SketchLine_68 = Sketch_8.addLine(55, -34.06366588218793, 55, 76.69872981077803) SketchLine_68.setName("SketchLine_70") SketchLine_68.result().setName("SketchLine_70") SketchLine_68.setAuxiliary(True) SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_10.result()) SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_120") -SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4")) +SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3&Extrusion_8_1/Generated_Face_4")) SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_11.result()) SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_121") SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -44.9999999570576, 76.69872981077805) @@ -643,7 +643,7 @@ SketchLine_70.result().setName("SketchLine_71") SketchLine_70.setAuxiliary(True) SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint()) SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_122") -SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4")) +SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_3&Extrusion_8_1/Generated_Face_4")) SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_12.result()) SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_123") SketchLine_71 = Sketch_8.addLine(-55, 66.69872976783566, -55, -34.06366588218793) @@ -653,7 +653,7 @@ SketchLine_72 = Sketch_8.addLine(-55, 76.69872981077803, -55, -34.06366588218793 SketchLine_72.setAuxiliary(True) SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint()) SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_124") -SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_5")) +SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_3")) SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_13.result()) SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_125") SketchLine_73 = Sketch_8.addLine(-55, -34.06366588218793, -83.25521566485324, -34.06366588218793) diff --git a/test.models/bearing_puller.py b/test.models/bearing_puller.py index f5f3a09f5..fc234273f 100644 --- a/test.models/bearing_puller.py +++ b/test.models/bearing_puller.py @@ -100,14 +100,14 @@ SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_5.startPoint( SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_35") model.do() Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_4r-SketchArc_1_2f-SketchArc_2_2f-SketchLine_28r-SketchLine_29r")], model.selection("EDGE", "PartSet/OZ"), 360, 0) -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5")) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_2")) SketchLine_8 = Sketch_2.addLine(0, 0, 25, 43.30127018922193) SketchLine_8.setName("SketchLine_5") SketchLine_8.result().setName("SketchLine_5") SketchLine_8.setAuxiliary(True) SketchPoint_3 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin")) SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchPoint_3.result()) -SketchCircle_1 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_6&Revolution_1_1/Generated_Face_5")) +SketchCircle_1 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1")) SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchCircle_1.results()[1]) SketchLine_9 = Sketch_2.addLine(39.43375672974064, -43.30127018922192, 15.87711932209923, -2.499977343709401) SketchLine_9.setName("SketchLine_10") @@ -117,7 +117,7 @@ SketchLine_10.setName("SketchLine_6") SketchLine_10.result().setName("SketchLine_6") SketchLine_10.setAuxiliary(True) SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchPoint_3.result()) -SketchCircle_2 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_6&Revolution_1_1/Generated_Face_5")) +SketchCircle_2 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1")) SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchCircle_2.results()[1]) SketchLine_11 = Sketch_2.addLine(15.87713238415337, 2.499999967850816, 39.43375672974065, 43.30127018922192) SketchLine_12 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX")) @@ -228,7 +228,7 @@ SketchLine_22.result().setName("SketchLine_19") SketchConstraintDistance_9 = Sketch_2.setDistance(SketchArc_9.center(), SketchPoint_3.coordinates(), 21) SketchConstraintDistance_9.setName("SketchConstraintDistance_8") model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_10r-SketchLine_11r-SketchArc_3_2f-SketchArc_4_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12r-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face_2"), 10) +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_10r-SketchLine_11r-SketchArc_3_2f-SketchArc_4_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12r-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 10) Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5")]) Boolean_1.result().setName("Boolean_1_1") Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_6")]) @@ -565,7 +565,7 @@ SketchLine_99 = Sketch_10.addLine(model.selection("EDGE", "PartSet/OY")) SketchConstraintDistance_35 = Sketch_10.setDistance(SketchLine_98.endPoint(), SketchLine_99.result(), "Thickness") model.do() Revolution_2 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r-SketchLine_5r-SketchLine_6r")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"), 360, 0) -Sketch_11 = model.addSketch(Part_5_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5")) +Sketch_11 = model.addSketch(Part_5_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_1")) SketchCircle_14 = Sketch_11.addCircle(0, 0, 8.5) SketchCircle_14.setAuxiliary(True) SketchPoint_8 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_6e")) @@ -607,7 +607,7 @@ SketchConstraintCoincidence_248 = Sketch_12.setCoincident(SketchLine_106.startPo SketchConstraintHorizontal_20 = Sketch_12.setHorizontal(SketchLine_107.result()) SketchConstraintVertical_20 = Sketch_12.setVertical(SketchLine_106.result()) SketchConstraintAngle_8 = Sketch_12.setAngle(SketchLine_108.result(), SketchLine_107.result(), 30) -SketchLine_109 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3")) +SketchLine_109 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3")) SketchConstraintCoincidence_249 = Sketch_12.setCoincident(SketchLine_108.endPoint(), SketchLine_109.result()) SketchProjection_2 = Sketch_12.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1")) SketchLine_110 = SketchProjection_2.createdFeature() diff --git a/test.models/bushing.py b/test.models/bushing.py index fa5803232..f095cbb63 100644 --- a/test.models/bushing.py +++ b/test.models/bushing.py @@ -583,7 +583,7 @@ SketchLine_379 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY")) SketchConstraintDistance_13 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_379.result(), 15) model.do() Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_8f-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f")], model.selection("EDGE", "PartSet/OX"), 360, 0) -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_1_2r-SketchLine_382f-SketchLine_383f-SketchLine_20f-SketchArc_2_2r-SketchLine_21f-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f-SketchLine_30f-SketchLine_31f-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f-SketchLine_36f-SketchLine_37f-SketchLine_38f-SketchLine_39f-SketchLine_40f-SketchLine_41f-SketchLine_42f-SketchLine_43f-SketchLine_44f-SketchLine_45f-SketchLine_46f-SketchLine_47f-SketchLine_48f-SketchLine_49f-SketchLine_50f-SketchLine_51f-SketchLine_52f-SketchLine_53f-SketchLine_54f-SketchLine_55f-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchLine_59f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchLine_65f-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_69f-SketchLine_70f-SketchLine_71f-SketchLine_72f-SketchLine_73f-SketchLine_74f-SketchLine_75f-SketchLine_76f-SketchLine_77f-SketchLine_78f-SketchLine_79f-SketchLine_80f-SketchLine_81f-SketchLine_82f-SketchLine_83f-SketchLine_84f-SketchLine_85f-SketchLine_86f-SketchLine_87f-SketchLine_88f-SketchLine_89f-SketchLine_90f-SketchLine_91f-SketchLine_92f-SketchLine_93f-SketchLine_94f-SketchLine_95f-SketchLine_96f-SketchLine_97f-SketchLine_98f-SketchLine_99f-SketchLine_100f-SketchLine_101f-SketchLine_102f-SketchLine_103f-SketchLine_104f-SketchLine_105f-SketchLine_106f-SketchLine_107f-SketchLine_108f-SketchLine_109f-SketchLine_110f-SketchLine_111f-SketchLine_112f-SketchLine_113f-SketchLine_114f-SketchLine_115f-SketchLine_116f-SketchLine_117f-SketchLine_118f-SketchLine_119f-SketchLine_120f-SketchLine_121f-SketchLine_122f-SketchLine_123f-SketchLine_124f-SketchLine_125f-SketchLine_126f-SketchLine_127f-SketchLine_128f-SketchLine_129f-SketchLine_130f-SketchLine_131f-SketchLine_132f-SketchLine_133f-SketchLine_134f-SketchLine_135f-SketchLine_136f-SketchLine_137f-SketchLine_138f-SketchLine_139f-SketchLine_140f-SketchLine_141f-SketchLine_142f-SketchLine_143f-SketchLine_144f-SketchLine_145f-SketchLine_146f-SketchLine_147f-SketchLine_148f-SketchLine_149f-SketchLine_150f-SketchLine_151f-SketchLine_152f-SketchLine_153f-SketchLine_154f-SketchLine_155f-SketchLine_156f-SketchLine_157f-SketchLine_158f-SketchLine_159f-SketchLine_160f-SketchLine_161f-SketchLine_162f-SketchLine_163f-SketchLine_164f-SketchLine_165f-SketchLine_166f-SketchLine_167f-SketchLine_168f-SketchLine_169f-SketchLine_170f-SketchLine_171f-SketchLine_172f-SketchLine_173f-SketchLine_174f-SketchLine_175f-SketchLine_176f-SketchLine_177f-SketchLine_178f-SketchLine_179f-SketchLine_180f-SketchLine_181f-SketchLine_182f-SketchLine_183f-SketchLine_184f-SketchLine_185f-SketchLine_186f-SketchLine_187f-SketchLine_188f-SketchLine_189f-SketchLine_190f-SketchLine_191f-SketchLine_192f-SketchLine_193f-SketchLine_194f-SketchLine_195f-SketchLine_196f-SketchLine_197f-SketchLine_198f-SketchLine_199f-SketchArc_3_2r-SketchArc_4_2r-SketchArc_5_2r-SketchArc_6_2r-SketchArc_7_2r-SketchArc_8_2r-SketchArc_9_2r-SketchArc_10_2r-SketchArc_11_2r-SketchArc_12_2r-SketchArc_13_2r-SketchArc_14_2r-SketchArc_15_2r-SketchArc_16_2r-SketchArc_17_2r-SketchArc_18_2r-SketchArc_19_2r-SketchArc_20_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_23_2r-SketchArc_24_2r-SketchArc_25_2r-SketchArc_26_2r-SketchArc_27_2r-SketchArc_28_2r-SketchArc_29_2r-SketchArc_30_2r-SketchArc_31_2r-SketchArc_32_2r-SketchArc_33_2r-SketchArc_34_2r-SketchArc_35_2r-SketchArc_36_2r-SketchArc_37_2r-SketchArc_38_2r-SketchArc_39_2r-SketchArc_40_2r-SketchArc_41_2r-SketchArc_42_2r-SketchArc_43_2r-SketchArc_44_2r-SketchArc_45_2r-SketchArc_46_2r-SketchArc_47_2r-SketchArc_48_2r-SketchArc_49_2r-SketchArc_50_2r-SketchArc_51_2r-SketchArc_52_2r-SketchArc_53_2r-SketchArc_54_2r-SketchArc_55_2r-SketchArc_56_2r-SketchArc_57_2r-SketchArc_58_2r-SketchArc_59_2r-SketchArc_60_2r-SketchArc_61_2r-SketchArc_62_2r-SketchArc_63_2r-SketchArc_64_2r-SketchArc_65_2r-SketchArc_66_2r-SketchArc_67_2r-SketchArc_68_2r-SketchArc_69_2r-SketchArc_70_2r-SketchArc_71_2r-SketchArc_72_2r-SketchArc_73_2r-SketchArc_74_2r-SketchArc_75_2r-SketchArc_76_2r-SketchArc_77_2r-SketchArc_78_2r-SketchArc_79_2r-SketchArc_80_2r-SketchArc_81_2r-SketchArc_82_2r-SketchArc_83_2r-SketchArc_84_2r-SketchArc_85_2r-SketchArc_86_2r-SketchArc_87_2r-SketchArc_88_2r-SketchArc_89_2r-SketchArc_90_2r-SketchArc_91_2r-SketchArc_92_2r-SketchArc_93_2r-SketchArc_94_2r-SketchArc_95_2r-SketchArc_96_2r-SketchArc_97_2r-SketchArc_98_2r-SketchArc_99_2r-SketchArc_100_2r-SketchArc_101_2r-SketchArc_102_2r-SketchArc_103_2r-SketchArc_104_2r-SketchArc_105_2r-SketchArc_106_2r-SketchArc_107_2r-SketchArc_108_2r-SketchArc_109_2r-SketchArc_110_2r-SketchArc_111_2r-SketchArc_112_2r-SketchArc_113_2r-SketchArc_114_2r-SketchArc_115_2r-SketchArc_116_2r-SketchArc_117_2r-SketchArc_118_2r-SketchArc_119_2r-SketchArc_120_2r-SketchArc_121_2r-SketchArc_122_2r-SketchArc_123_2r-SketchArc_124_2r-SketchArc_125_2r-SketchArc_126_2r-SketchArc_127_2r-SketchArc_128_2r-SketchArc_129_2r-SketchArc_130_2r-SketchArc_131_2r-SketchArc_132_2r-SketchArc_133_2r-SketchArc_134_2r-SketchArc_135_2r-SketchArc_136_2r-SketchArc_137_2r-SketchArc_138_2r-SketchArc_139_2r-SketchArc_140_2r-SketchArc_141_2r-SketchArc_142_2r-SketchArc_143_2r-SketchArc_144_2r-SketchArc_145_2r-SketchArc_146_2r-SketchArc_147_2r-SketchArc_148_2r-SketchArc_149_2r-SketchArc_150_2r-SketchArc_151_2r-SketchArc_152_2r-SketchArc_153_2r-SketchArc_154_2r-SketchArc_155_2r-SketchArc_156_2r-SketchArc_157_2r-SketchArc_158_2r-SketchArc_159_2r-SketchArc_160_2r-SketchArc_161_2r-SketchArc_162_2r-SketchArc_163_2r-SketchArc_164_2r-SketchArc_165_2r-SketchArc_166_2r-SketchArc_167_2r-SketchArc_168_2r-SketchArc_169_2r-SketchArc_170_2r-SketchArc_171_2r-SketchArc_172_2r-SketchArc_173_2r-SketchArc_174_2r-SketchArc_175_2r-SketchArc_176_2r-SketchArc_177_2r-SketchArc_178_2r-SketchArc_179_2r-SketchArc_180_2r-SketchLine_200f-SketchLine_201f-SketchLine_202f-SketchLine_203f-SketchLine_204f-SketchLine_205f-SketchLine_206f-SketchLine_207f-SketchLine_208f-SketchLine_209f-SketchLine_210f-SketchLine_211f-SketchLine_212f-SketchLine_213f-SketchLine_214f-SketchLine_215f-SketchLine_216f-SketchLine_217f-SketchLine_218f-SketchLine_219f-SketchLine_220f-SketchLine_221f-SketchLine_222f-SketchLine_223f-SketchLine_224f-SketchLine_225f-SketchLine_226f-SketchLine_227f-SketchLine_228f-SketchLine_229f-SketchLine_230f-SketchLine_231f-SketchLine_232f-SketchLine_233f-SketchLine_234f-SketchLine_235f-SketchLine_236f-SketchLine_237f-SketchLine_238f-SketchLine_239f-SketchLine_240f-SketchLine_241f-SketchLine_242f-SketchLine_243f-SketchLine_244f-SketchLine_245f-SketchLine_246f-SketchLine_247f-SketchLine_248f-SketchLine_249f-SketchLine_250f-SketchLine_251f-SketchLine_252f-SketchLine_253f-SketchLine_254f-SketchLine_255f-SketchLine_256f-SketchLine_257f-SketchLine_258f-SketchLine_259f-SketchLine_260f-SketchLine_261f-SketchLine_262f-SketchLine_263f-SketchLine_264f-SketchLine_265f-SketchLine_266f-SketchLine_267f-SketchLine_268f-SketchLine_269f-SketchLine_270f-SketchLine_271f-SketchLine_272f-SketchLine_273f-SketchLine_274f-SketchLine_275f-SketchLine_276f-SketchLine_277f-SketchLine_278f-SketchLine_279f-SketchLine_280f-SketchLine_281f-SketchLine_282f-SketchLine_283f-SketchLine_284f-SketchLine_285f-SketchLine_286f-SketchLine_287f-SketchLine_288f-SketchLine_289f-SketchLine_290f-SketchLine_291f-SketchLine_292f-SketchLine_293f-SketchLine_294f-SketchLine_295f-SketchLine_296f-SketchLine_297f-SketchLine_298f-SketchLine_299f-SketchLine_300f-SketchLine_301f-SketchLine_302f-SketchLine_303f-SketchLine_304f-SketchLine_305f-SketchLine_306f-SketchLine_307f-SketchLine_308f-SketchLine_309f-SketchLine_310f-SketchLine_311f-SketchLine_312f-SketchLine_313f-SketchLine_314f-SketchLine_315f-SketchLine_316f-SketchLine_317f-SketchLine_318f-SketchLine_319f-SketchLine_320f-SketchLine_321f-SketchLine_322f-SketchLine_323f-SketchLine_324f-SketchLine_325f-SketchLine_326f-SketchLine_327f-SketchLine_328f-SketchLine_329f-SketchLine_330f-SketchLine_331f-SketchLine_332f-SketchLine_333f-SketchLine_334f-SketchLine_335f-SketchLine_336f-SketchLine_337f-SketchLine_338f-SketchLine_339f-SketchLine_340f-SketchLine_341f-SketchLine_342f-SketchLine_343f-SketchLine_344f-SketchLine_345f-SketchLine_346f-SketchLine_347f-SketchLine_348f-SketchLine_349f-SketchLine_350f-SketchLine_351f-SketchLine_352f-SketchLine_353f-SketchLine_354f-SketchLine_355f-SketchLine_356f-SketchLine_357f-SketchLine_358f-SketchLine_359f-SketchLine_360f-SketchLine_361f-SketchLine_362f-SketchLine_363f-SketchLine_364f-SketchLine_365f-SketchLine_366f-SketchLine_367f-SketchLine_368f-SketchLine_369f-SketchLine_370f-SketchLine_371f-SketchLine_372f-SketchLine_373f-SketchLine_374f-SketchLine_375f-SketchLine_376f-SketchLine_377f-SketchCircle_3_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_7"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_1_2r-SketchLine_382f-SketchLine_383f-SketchLine_20f-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f-SketchLine_30f-SketchLine_31f-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f-SketchLine_36f-SketchLine_37f-SketchLine_38f-SketchLine_39f-SketchLine_40f-SketchLine_41f-SketchLine_42f-SketchLine_43f-SketchLine_44f-SketchLine_45f-SketchLine_46f-SketchLine_47f-SketchLine_48f-SketchLine_49f-SketchLine_50f-SketchLine_51f-SketchLine_52f-SketchLine_53f-SketchLine_54f-SketchLine_55f-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchLine_59f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchLine_65f-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_69f-SketchLine_70f-SketchLine_71f-SketchLine_72f-SketchLine_73f-SketchLine_74f-SketchLine_75f-SketchLine_76f-SketchLine_77f-SketchLine_78f-SketchLine_79f-SketchLine_80f-SketchLine_81f-SketchLine_82f-SketchLine_83f-SketchLine_84f-SketchLine_85f-SketchLine_86f-SketchLine_87f-SketchLine_88f-SketchLine_89f-SketchLine_90f-SketchLine_91f-SketchLine_92f-SketchLine_93f-SketchLine_94f-SketchLine_95f-SketchLine_96f-SketchLine_97f-SketchLine_98f-SketchLine_99f-SketchLine_100f-SketchLine_101f-SketchLine_102f-SketchLine_103f-SketchLine_104f-SketchLine_105f-SketchLine_106f-SketchLine_107f-SketchLine_108f-SketchLine_109f-SketchLine_110f-SketchLine_111f-SketchLine_112f-SketchLine_113f-SketchLine_114f-SketchLine_115f-SketchLine_116f-SketchLine_117f-SketchLine_118f-SketchLine_119f-SketchLine_120f-SketchLine_121f-SketchLine_122f-SketchLine_123f-SketchLine_124f-SketchLine_125f-SketchLine_126f-SketchLine_127f-SketchLine_128f-SketchLine_129f-SketchLine_130f-SketchLine_131f-SketchLine_132f-SketchLine_133f-SketchLine_134f-SketchLine_135f-SketchLine_136f-SketchLine_137f-SketchLine_138f-SketchLine_139f-SketchLine_140f-SketchLine_141f-SketchLine_142f-SketchLine_143f-SketchLine_144f-SketchLine_145f-SketchLine_146f-SketchLine_147f-SketchLine_148f-SketchLine_149f-SketchLine_150f-SketchLine_151f-SketchLine_152f-SketchLine_153f-SketchLine_154f-SketchLine_155f-SketchLine_156f-SketchLine_157f-SketchLine_158f-SketchLine_159f-SketchLine_160f-SketchLine_161f-SketchLine_162f-SketchLine_163f-SketchLine_164f-SketchLine_165f-SketchLine_166f-SketchLine_167f-SketchLine_168f-SketchLine_169f-SketchLine_170f-SketchLine_171f-SketchLine_172f-SketchLine_173f-SketchLine_174f-SketchLine_175f-SketchLine_176f-SketchLine_177f-SketchLine_178f-SketchLine_179f-SketchLine_180f-SketchLine_181f-SketchLine_182f-SketchLine_183f-SketchLine_184f-SketchLine_185f-SketchLine_186f-SketchLine_187f-SketchLine_188f-SketchLine_189f-SketchLine_190f-SketchLine_191f-SketchLine_192f-SketchLine_193f-SketchLine_194f-SketchLine_195f-SketchLine_196f-SketchLine_197f-SketchLine_198f-SketchLine_199f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2r-SketchArc_5_2r-SketchArc_6_2r-SketchArc_7_2r-SketchArc_8_2r-SketchArc_9_2r-SketchArc_10_2r-SketchArc_11_2r-SketchArc_12_2r-SketchArc_13_2r-SketchArc_14_2r-SketchArc_15_2r-SketchArc_16_2r-SketchArc_17_2r-SketchArc_18_2r-SketchArc_19_2r-SketchArc_20_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_23_2r-SketchArc_24_2r-SketchArc_25_2r-SketchArc_26_2r-SketchArc_27_2r-SketchArc_28_2r-SketchArc_29_2r-SketchArc_30_2r-SketchArc_31_2r-SketchArc_32_2r-SketchArc_33_2r-SketchArc_34_2r-SketchArc_35_2r-SketchArc_36_2r-SketchArc_37_2r-SketchArc_38_2r-SketchArc_39_2r-SketchArc_40_2r-SketchArc_41_2r-SketchArc_42_2r-SketchArc_43_2r-SketchArc_44_2r-SketchArc_45_2r-SketchArc_46_2r-SketchArc_47_2r-SketchArc_48_2r-SketchArc_49_2r-SketchArc_50_2r-SketchArc_51_2r-SketchArc_52_2r-SketchArc_53_2r-SketchArc_54_2r-SketchArc_55_2r-SketchArc_56_2r-SketchArc_57_2r-SketchArc_58_2r-SketchArc_59_2r-SketchArc_60_2r-SketchArc_61_2r-SketchArc_62_2r-SketchArc_63_2r-SketchArc_64_2r-SketchArc_65_2r-SketchArc_66_2r-SketchArc_67_2r-SketchArc_68_2r-SketchArc_69_2r-SketchArc_70_2r-SketchArc_71_2r-SketchArc_72_2r-SketchArc_73_2r-SketchArc_74_2r-SketchArc_75_2r-SketchArc_76_2r-SketchArc_77_2r-SketchArc_78_2r-SketchArc_79_2r-SketchArc_80_2r-SketchArc_81_2r-SketchArc_82_2r-SketchArc_83_2r-SketchArc_84_2r-SketchArc_85_2r-SketchArc_86_2r-SketchArc_87_2r-SketchArc_88_2r-SketchArc_89_2r-SketchArc_90_2r-SketchArc_91_2r-SketchArc_92_2r-SketchArc_93_2r-SketchArc_94_2r-SketchArc_95_2r-SketchArc_96_2r-SketchArc_97_2r-SketchArc_98_2r-SketchArc_99_2r-SketchArc_100_2r-SketchArc_101_2r-SketchArc_102_2r-SketchArc_103_2r-SketchArc_104_2r-SketchArc_105_2r-SketchArc_106_2r-SketchArc_107_2r-SketchArc_108_2r-SketchArc_109_2r-SketchArc_110_2r-SketchArc_111_2r-SketchArc_112_2r-SketchArc_113_2r-SketchArc_114_2r-SketchArc_115_2r-SketchArc_116_2r-SketchArc_117_2r-SketchArc_118_2r-SketchArc_119_2r-SketchArc_120_2r-SketchArc_121_2r-SketchArc_122_2r-SketchArc_123_2r-SketchArc_124_2r-SketchArc_125_2r-SketchArc_126_2r-SketchArc_127_2r-SketchArc_128_2r-SketchArc_129_2r-SketchArc_130_2r-SketchArc_131_2r-SketchArc_132_2r-SketchArc_133_2r-SketchArc_134_2r-SketchArc_135_2r-SketchArc_136_2r-SketchArc_137_2r-SketchArc_138_2r-SketchArc_139_2r-SketchArc_140_2r-SketchArc_141_2r-SketchArc_142_2r-SketchArc_143_2r-SketchArc_144_2r-SketchArc_145_2r-SketchArc_146_2r-SketchArc_147_2r-SketchArc_148_2r-SketchArc_149_2r-SketchArc_150_2r-SketchArc_151_2r-SketchArc_152_2r-SketchArc_153_2r-SketchArc_154_2r-SketchArc_155_2r-SketchArc_156_2r-SketchArc_157_2r-SketchArc_158_2r-SketchArc_159_2r-SketchArc_160_2r-SketchArc_161_2r-SketchArc_162_2r-SketchArc_163_2r-SketchArc_164_2r-SketchArc_165_2r-SketchArc_166_2r-SketchArc_167_2r-SketchArc_168_2r-SketchArc_169_2r-SketchArc_170_2r-SketchArc_171_2r-SketchArc_172_2r-SketchArc_173_2r-SketchArc_174_2r-SketchArc_175_2r-SketchArc_176_2r-SketchArc_177_2r-SketchArc_178_2r-SketchArc_179_2r-SketchArc_180_2r-SketchLine_21f-SketchLine_200f-SketchLine_201f-SketchLine_202f-SketchLine_203f-SketchLine_204f-SketchLine_205f-SketchLine_206f-SketchLine_207f-SketchLine_208f-SketchLine_209f-SketchLine_210f-SketchLine_211f-SketchLine_212f-SketchLine_213f-SketchLine_214f-SketchLine_215f-SketchLine_216f-SketchLine_217f-SketchLine_218f-SketchLine_219f-SketchLine_220f-SketchLine_221f-SketchLine_222f-SketchLine_223f-SketchLine_224f-SketchLine_225f-SketchLine_226f-SketchLine_227f-SketchLine_228f-SketchLine_229f-SketchLine_230f-SketchLine_231f-SketchLine_232f-SketchLine_233f-SketchLine_234f-SketchLine_235f-SketchLine_236f-SketchLine_237f-SketchLine_238f-SketchLine_239f-SketchLine_240f-SketchLine_241f-SketchLine_242f-SketchLine_243f-SketchLine_244f-SketchLine_245f-SketchLine_246f-SketchLine_247f-SketchLine_248f-SketchLine_249f-SketchLine_250f-SketchLine_251f-SketchLine_252f-SketchLine_253f-SketchLine_254f-SketchLine_255f-SketchLine_256f-SketchLine_257f-SketchLine_258f-SketchLine_259f-SketchLine_260f-SketchLine_261f-SketchLine_262f-SketchLine_263f-SketchLine_264f-SketchLine_265f-SketchLine_266f-SketchLine_267f-SketchLine_268f-SketchLine_269f-SketchLine_270f-SketchLine_271f-SketchLine_272f-SketchLine_273f-SketchLine_274f-SketchLine_275f-SketchLine_276f-SketchLine_277f-SketchLine_278f-SketchLine_279f-SketchLine_280f-SketchLine_281f-SketchLine_282f-SketchLine_283f-SketchLine_284f-SketchLine_285f-SketchLine_286f-SketchLine_287f-SketchLine_288f-SketchLine_289f-SketchLine_290f-SketchLine_291f-SketchLine_292f-SketchLine_293f-SketchLine_294f-SketchLine_295f-SketchLine_296f-SketchLine_297f-SketchLine_298f-SketchLine_299f-SketchLine_300f-SketchLine_301f-SketchLine_302f-SketchLine_303f-SketchLine_304f-SketchLine_305f-SketchLine_306f-SketchLine_307f-SketchLine_308f-SketchLine_309f-SketchLine_310f-SketchLine_311f-SketchLine_312f-SketchLine_313f-SketchLine_314f-SketchLine_315f-SketchLine_316f-SketchLine_317f-SketchLine_318f-SketchLine_319f-SketchLine_320f-SketchLine_321f-SketchLine_322f-SketchLine_323f-SketchLine_324f-SketchLine_325f-SketchLine_326f-SketchLine_327f-SketchLine_328f-SketchLine_329f-SketchLine_330f-SketchLine_331f-SketchLine_332f-SketchLine_333f-SketchLine_334f-SketchLine_335f-SketchLine_336f-SketchLine_337f-SketchLine_338f-SketchLine_339f-SketchLine_340f-SketchLine_341f-SketchLine_342f-SketchLine_343f-SketchLine_344f-SketchLine_345f-SketchLine_346f-SketchLine_347f-SketchLine_348f-SketchLine_349f-SketchLine_350f-SketchLine_351f-SketchLine_352f-SketchLine_353f-SketchLine_354f-SketchLine_355f-SketchLine_356f-SketchLine_357f-SketchLine_358f-SketchLine_359f-SketchLine_360f-SketchLine_361f-SketchLine_362f-SketchLine_363f-SketchLine_364f-SketchLine_365f-SketchLine_366f-SketchLine_367f-SketchLine_368f-SketchLine_369f-SketchLine_370f-SketchLine_371f-SketchLine_372f-SketchLine_373f-SketchLine_374f-SketchLine_375f-SketchLine_376f-SketchLine_377f-SketchCircle_3_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) ExtrusionCut_1.result().setName("ExtrusionCut_1_1") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_4_2f")], model.selection(), 30, 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_2.result().setName("ExtrusionCut_2_1") diff --git a/test.models/case24.py b/test.models/case24.py index c0d1c6eb3..c13b9d608 100644 --- a/test.models/case24.py +++ b/test.models/case24.py @@ -129,14 +129,14 @@ SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_11.endPoint(), Sket model.do() ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13f-SketchLine_9f-SketchLine_10f-SketchLine_14f-SketchArc_2_2f")], model.selection(), 0, 25, [model.selection("SOLID", "ExtrusionFuse_1_1")]) ExtrusionFuse_2.result().setName("ExtrusionFuse_2_1") -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_8")) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_5")) SketchLine_15 = Sketch_3.addLine(0, -20, -17.00000002635728, -20) SketchLine_15.setName("SketchLine_19") SketchLine_15.result().setName("SketchLine_19") SketchLine_16 = Sketch_3.addLine(-20, 0, 0, 0) SketchLine_16.setName("SketchLine_15") SketchLine_16.result().setName("SketchLine_15") -SketchPoint_2 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_7&ExtrusionFuse_2_1/Modfied_5&ExtrusionFuse_2_1/Modfied_8&ExtrusionFuse_2_1/Modfied_11")) +SketchPoint_2 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_6&ExtrusionFuse_2_1/Modfied_8&ExtrusionFuse_2_1/Modfied_5&ExtrusionFuse_2_1/Modfied_2")) SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchPoint_2.result()) SketchLine_17 = Sketch_3.addLine(0, 0, 0, -20) SketchLine_17.setName("SketchLine_16") @@ -178,7 +178,7 @@ SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_21.startPoint(), Sk model.do() RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "Sketch_3/Edge-SketchLine_21"), 71, 0, [model.selection("SOLID", "ExtrusionFuse_2_1")]) RevolutionFuse_1.result().setName("RevolutionFuse_1_1") -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_7")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_6")) SketchLine_22 = Sketch_4.addLine(-3, -20, 17.00000452949485, -20) SketchLine_22.setName("SketchLine_26") SketchLine_22.result().setName("SketchLine_26") @@ -439,7 +439,7 @@ SketchLine_54.result().setName("SketchLine_55") SketchLine_54.setAuxiliary(True) SketchConstraintCoincidence_86 = Sketch_7.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint()) SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_96") -SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_13&RevolutionFuse_3_1/Modfied_10")) +SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_12&RevolutionFuse_3_1/Modfied_15")) SketchLine_55.setName("SketchLine_56") SketchLine_55.result().setName("SketchLine_56") SketchConstraintCoincidence_87 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result()) @@ -656,7 +656,7 @@ Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY")) SketchLine_77 = Sketch_10.addLine(64, 20, 89, 20) SketchLine_77.setName("SketchLine_76") SketchLine_77.result().setName("SketchLine_76") -SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_2_1/Modfied_11&RevolutionFuse_2_1/Modfied_13&RevolutionFuse_3_1/Modfied_15&RevolutionFuse_3_1/Modfied_4")) +SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_2_1/Modfied_8&RevolutionFuse_2_1/Modfied_6&RevolutionFuse_3_1/Modfied_10&RevolutionFuse_3_1/Modfied_21")) SketchConstraintCoincidence_122 = Sketch_10.setCoincident(SketchLine_77.startPoint(), SketchPoint_4.result()) SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_120") SketchPoint_5 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_8e-SketchLine_4e")) @@ -665,10 +665,10 @@ SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_121") SketchLine_78 = Sketch_10.addLine(64, -20, 89, -20) SketchLine_78.setName("SketchLine_77") SketchLine_78.result().setName("SketchLine_77") -SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_1_1/Modfied_4&RevolutionFuse_1_1/Modfied_9&RevolutionFuse_3_1/Modfied_17&RevolutionFuse_3_1/Modfied_8")) +SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_1_1/Modfied_9&RevolutionFuse_1_1/Modfied_4&RevolutionFuse_3_1/Modfied_8&RevolutionFuse_3_1/Modfied_17")) SketchConstraintCoincidence_124 = Sketch_10.setCoincident(SketchLine_78.startPoint(), SketchPoint_6.result()) SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_122") -SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_2&RevolutionFuse_1_1/Modfied_4&ExtrusionFuse_2_1/Modfied_1&RevolutionFuse_3_1/Modfied_17")) +SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_11&RevolutionFuse_1_1/Modfied_9&ExtrusionFuse_2_1/Modfied_12&RevolutionFuse_3_1/Modfied_8")) SketchConstraintCoincidence_125 = Sketch_10.setCoincident(SketchLine_78.endPoint(), SketchPoint_7.result()) SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_123") SketchArc_10 = Sketch_10.addArc(89.00000104846708, 1.669244441022778e-015, 89, -20, 89, 20, False) @@ -691,7 +691,7 @@ SketchConstraintCoincidence_129 = Sketch_10.setCoincident(SketchArc_11.startPoin SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_127") SketchConstraintTangent_19 = Sketch_10.setTangent(SketchArc_11.results()[1], SketchLine_78.result()) SketchConstraintTangent_19.setName("SketchConstraintTangent_24") -SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_7&RevolutionFuse_3_1/Modfied_8&RevolutionFuse_3_1/Modfied_24&RevolutionFuse_3_1/Modfied_9")) +SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_16&RevolutionFuse_3_1/Modfied_17&ExtrusionCut_2_1/Modfied_2&RevolutionFuse_3_1/Modfied_2&RevolutionFuse_3_1/Modfied_1")) SketchConstraintCoincidence_130 = Sketch_10.setCoincident(SketchArc_11.endPoint(), SketchPoint_8.result()) SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_128") SketchArc_12 = Sketch_10.addArc(64.00001789135865, 23.01137360115889, 64, 20, 61.15622559702543, 22.02080994708722, True) @@ -702,7 +702,7 @@ SketchConstraintCoincidence_131 = Sketch_10.setCoincident(SketchArc_12.startPoin SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_129") SketchConstraintTangent_20 = Sketch_10.setTangent(SketchArc_12.results()[1], SketchLine_77.result()) SketchConstraintTangent_20.setName("SketchConstraintTangent_25") -SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_3&RevolutionFuse_3_1/Modfied_4&RevolutionFuse_3_1/Modfied_24&RevolutionFuse_3_1/Modfied_5")) +SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_20&RevolutionFuse_3_1/Modfied_21&ExtrusionCut_2_1/Modfied_2&RevolutionFuse_3_1/Modfied_3&RevolutionFuse_3_1/Modfied_1")) SketchConstraintCoincidence_132 = Sketch_10.setCoincident(SketchArc_12.endPoint(), SketchPoint_9.result()) SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_130") SketchLine_79 = Sketch_10.addLine(61.15622559702543, 22.02080994708722, 59.81204392543111, 22.0208099470871) diff --git a/test.models/clothespin.py b/test.models/clothespin.py index 66761864d..368df3b77 100644 --- a/test.models/clothespin.py +++ b/test.models/clothespin.py @@ -147,7 +147,7 @@ SketchLine_14.result().setName("SketchLine_16") SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_14.result()) SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_24") SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_3.results()[1], 6) -SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_1")) +SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12")) SketchLine_15.setName("SketchLine_17") SketchLine_15.result().setName("SketchLine_17") SketchConstraintDistance_8 = Sketch_2.setDistance(SketchArc_3.startPoint(), SketchLine_15.result(), 6) @@ -182,12 +182,12 @@ SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30") model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")]) ExtrusionCut_1.result().setName("ExtrusionCut_1_1") -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4")) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9")) SketchLine_21 = Sketch_3.addLine(28, -6, -4.270492394552598, -6.000000000000001) SketchLine_21.setName("SketchLine_23") SketchLine_21.result().setName("SketchLine_23") SketchLine_21.setAuxiliary(True) -SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4")) +SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9")) SketchLine_22.setName("SketchLine_24") SketchLine_22.result().setName("SketchLine_24") SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result()) @@ -305,27 +305,27 @@ SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_55") SketchConstraintMiddle_2 = Sketch_3.setMiddlePoint(SketchLine_34.result(), SketchPoint_4.coordinates()) SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchLine_21.result()) SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_56") -SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&ExtrusionCut_1_1/Modfied_4")) +SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3")) SketchLine_35.setName("SketchLine_37") SketchLine_35.result().setName("SketchLine_37") SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_25.startPoint(), SketchLine_35.result()) SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_57") SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_24.result(), 31) SketchConstraintLength_10.setName("SketchConstraintLength_11") -SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8")) +SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5")) SketchLine_36.setName("SketchLine_38") SketchLine_36.result().setName("SketchLine_38") SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_30.startPoint(), SketchLine_36.result()) SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_58") SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_30.result(), SketchLine_25.result()) model.do() -ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_2.result().setName("ExtrusionCut_2_1") Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1")) SketchLine_37 = Sketch_4.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599) SketchLine_37.setName("SketchLine_39") SketchLine_37.result().setName("SketchLine_39") -SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_11")) +SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2")) SketchLine_38.setName("SketchLine_40") SketchLine_38.result().setName("SketchLine_40") SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_37.startPoint(), SketchLine_38.result()) @@ -373,7 +373,7 @@ SketchLine_41.result().setName("SketchLine_43") model.do() ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) ExtrusionCut_3.result().setName("ExtrusionCut_3_1") -Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3")) +Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3")) Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchArc_4 = Sketch_5.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True) SketchPoint_5 = Sketch_5.addPoint(22.00014787857639, -7.5) @@ -1088,7 +1088,7 @@ SketchLine_120.result().setName("SketchLine_16") SketchConstraintCoincidence_193 = Sketch_12.setCoincident(SketchArc_26.endPoint(), SketchLine_120.result()) SketchConstraintCoincidence_193.setName("SketchConstraintCoincidence_24") SketchConstraintRadius_13 = Sketch_12.setRadius(SketchArc_26.results()[1], 6) -SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_1")) +SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12")) SketchLine_121.setName("SketchLine_17") SketchLine_121.result().setName("SketchLine_17") SketchConstraintDistance_25 = Sketch_12.setDistance(SketchArc_26.startPoint(), SketchLine_121.result(), 6) @@ -1123,12 +1123,12 @@ SketchConstraintCoincidence_199.setName("SketchConstraintCoincidence_30") model.do() ExtrusionCut_10 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")]) ExtrusionCut_10.result().setName("ExtrusionCut_1_1") -Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4")) +Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9")) SketchLine_127 = Sketch_13.addLine(28, -6, -4.270492394552598, -6.000000000000001) SketchLine_127.setName("SketchLine_23") SketchLine_127.result().setName("SketchLine_23") SketchLine_127.setAuxiliary(True) -SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4")) +SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9")) SketchLine_128.setName("SketchLine_24") SketchLine_128.result().setName("SketchLine_24") SketchConstraintCoincidence_200 = Sketch_13.setCoincident(SketchLine_127.startPoint(), SketchLine_128.result()) @@ -1246,27 +1246,27 @@ SketchConstraintCoincidence_224.setName("SketchConstraintCoincidence_55") SketchConstraintMiddle_10 = Sketch_13.setMiddlePoint(SketchLine_140.result(), SketchPoint_28.coordinates()) SketchConstraintCoincidence_225 = Sketch_13.setCoincident(SketchPoint_28.coordinates(), SketchLine_127.result()) SketchConstraintCoincidence_225.setName("SketchConstraintCoincidence_56") -SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&ExtrusionCut_1_1/Modfied_4")) +SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3")) SketchLine_141.setName("SketchLine_37") SketchLine_141.result().setName("SketchLine_37") SketchConstraintCoincidence_226 = Sketch_13.setCoincident(SketchLine_131.startPoint(), SketchLine_141.result()) SketchConstraintCoincidence_226.setName("SketchConstraintCoincidence_57") SketchConstraintLength_27 = Sketch_13.setLength(SketchLine_130.result(), 31) SketchConstraintLength_27.setName("SketchConstraintLength_11") -SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8")) +SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5")) SketchLine_142.setName("SketchLine_38") SketchLine_142.result().setName("SketchLine_38") SketchConstraintCoincidence_227 = Sketch_13.setCoincident(SketchLine_136.startPoint(), SketchLine_142.result()) SketchConstraintCoincidence_227.setName("SketchConstraintCoincidence_58") SketchConstraintEqual_5 = Sketch_13.setEqual(SketchLine_136.result(), SketchLine_131.result()) model.do() -ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_11.result().setName("ExtrusionCut_2_1") Sketch_14 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1")) SketchLine_143 = Sketch_14.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599) SketchLine_143.setName("SketchLine_39") SketchLine_143.result().setName("SketchLine_39") -SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_11")) +SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2")) SketchLine_144.setName("SketchLine_40") SketchLine_144.result().setName("SketchLine_40") SketchConstraintCoincidence_228 = Sketch_14.setCoincident(SketchLine_143.startPoint(), SketchLine_144.result()) @@ -1314,7 +1314,7 @@ SketchLine_147.result().setName("SketchLine_43") model.do() ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) ExtrusionCut_12.result().setName("ExtrusionCut_3_1") -Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3")) +Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3")) Sketch_15 = model.addSketch(Part_2_doc, model.selection("FACE", "Plane_1")) SketchArc_27 = Sketch_15.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True) SketchPoint_29 = Sketch_15.addPoint(22.00014787857639, -7.5) diff --git a/test.models/ecran.py b/test.models/ecran.py index 5bd402786..8f5c6417c 100644 --- a/test.models/ecran.py +++ b/test.models/ecran.py @@ -118,9 +118,9 @@ model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.") Extrusion_1.setName("Profil") Extrusion_1.result().setName("Extrusion_1_1") -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7")) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3")) SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3) -SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1")) +SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1")) SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_1.result()) SketchLine_15 = Sketch_2.addLine(153.5, -2.3, 153.5, 7.7) SketchLine_16 = Sketch_2.addLine(153.5, 7.7, 149.5, 7.7) @@ -150,25 +150,25 @@ SketchConstraintLength_5 = Sketch_2.setLength(SketchLine_21.result(), 10) SketchConstraintLength_5.setName("SketchConstraintLength_6") SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_16.endPoint(), SketchLine_21.result(), 299) SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_20.result()) -SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1")) +SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1")) SketchPoint_2.setName("SketchPoint_4") SketchPoint_2.result().setName("SketchPoint_4") SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchPoint_2.coordinates()) SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39") model.do() -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) ExtrusionCut_1.setName("Decoupe_Angle") ExtrusionCut_1.result().setName("ExtrusionCut_1_1") -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8")) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_2")) SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3) SketchLine_22.setName("SketchLine_29") SketchLine_22.result().setName("SketchLine_29") -SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8")) +SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2")) SketchPoint_3.setName("SketchPoint_5") SketchPoint_3.result().setName("SketchPoint_5") SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchPoint_3.result()) SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_40") -SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8")) +SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2")) SketchLine_23.setName("SketchLine_30") SketchLine_23.result().setName("SketchLine_30") SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.result()) @@ -207,16 +207,16 @@ Sketch_3.result().setName("Sketch_4") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_2.setName("Chamfrein_1") ExtrusionCut_2.result().setName("ExtrusionCut_2_1") -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_7")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_5")) SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3) SketchLine_30.setName("SketchLine_35") SketchLine_30.result().setName("SketchLine_35") -SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7&ExtrusionCut_1_1/Modfied_6")) +SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_5&ExtrusionCut_1_1/Modfied_6")) SketchPoint_4.setName("SketchPoint_6") SketchPoint_4.result().setName("SketchPoint_6") SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchPoint_4.result()) SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43") -SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7")) +SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_5")) SketchLine_31.setName("SketchLine_36") SketchLine_31.result().setName("SketchLine_36") SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result()) @@ -291,16 +291,16 @@ SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_59") model.do() Sketch_4.setName("Sketch_5") Sketch_4.result().setName("Sketch_5") -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_7"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) ExtrusionCut_3.result().setName("ExtrusionCut_3_1") -Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_9")) +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_3")) SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714) SketchLine_40.setName("SketchLine_58") SketchLine_40.result().setName("SketchLine_58") SketchLine_41 = Sketch_5.addLine(152.2999838292651, -45.04999053274704, 153.5, -45.04999053274702) SketchLine_41.setName("SketchLine_57") SketchLine_41.result().setName("SketchLine_57") -SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_9")) +SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_3")) SketchLine_42.setName("SketchLine_46") SketchLine_42.result().setName("SketchLine_46") SketchLine_43 = Sketch_5.addLine(150.8, -45.04999053274702, 153.5, -45.04999053274702) diff --git a/test.models/gear.py b/test.models/gear.py index e0c52c036..065a84dbf 100644 --- a/test.models/gear.py +++ b/test.models/gear.py @@ -164,7 +164,7 @@ SketchConstraintLength_9 = Sketch_3.setLength(SketchLine_84.result(), "2*R_fille SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_83.result(), "2*R_fillet") model.do() Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1")], model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_1"), 360, 0) -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_1")) SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin")) SketchLine_86 = Sketch_4.addLine(0, -13.49999999999519, 3.1, -13.49999999999519) SketchLine_87 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OZ")) @@ -196,7 +196,7 @@ SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_6.coordinate SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchLine_89.result()) SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_6.coordinates(), SketchLine_86.result(), 24.5) model.do() -ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) +ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) ExtrusionCut_1.result().setName("ExtrusionCut_1_1") RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "PartSet/OX"), 0, 360, [model.selection("SOLID", "ExtrusionCut_1_1")]) RevolutionCut_1.result().setName("RevolutionCut_1_1") diff --git a/test.models/piece_02.py b/test.models/piece_02.py index 92d8e891f..e9a036f83 100644 --- a/test.models/piece_02.py +++ b/test.models/piece_02.py @@ -72,26 +72,26 @@ SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], Sketch model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_5r-SketchLine_6r-SketchArc_1_2f-SketchArc_2_2f-SketchArc_3_2f-SketchArc_4_2f")], model.selection(), 76, 0) Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1")) -SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1")) +SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1")) SketchLine_7.setName("SketchLine_8") SketchLine_7.result().setName("SketchLine_8") SketchLine_8 = Sketch_2.addLine(21, 45.99999999998655, 20.99999999998684, 0) SketchLine_8.setName("SketchLine_9") SketchLine_8.result().setName("SketchLine_9") SketchLine_8.setAuxiliary(True) -SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1")) +SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1")) SketchLine_9.setName("SketchLine_10") SketchLine_9.result().setName("SketchLine_10") SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result()) SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18") -SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1")) +SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1")) SketchLine_10.setName("SketchLine_11") SketchLine_10.result().setName("SketchLine_11") SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.result()) SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19") SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_9.result()) SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_10.result()) -SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1")) +SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1")) SketchLine_11.setName("SketchLine_12") SketchLine_11.result().setName("SketchLine_12") SketchPoint_1 = Sketch_2.addPoint(20.99999999999342, 22.99999999999327) @@ -139,12 +139,12 @@ SketchLine_13 = Sketch_3.addLine(41.99999999999999, 22.99999999998655, 0, 22.999 SketchLine_13.setName("SketchLine_14") SketchLine_13.result().setName("SketchLine_14") SketchLine_13.setAuxiliary(True) -SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3")) +SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5")) SketchLine_14.setName("SketchLine_15") SketchLine_14.result().setName("SketchLine_15") SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_14.result()) SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27") -SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_2_1/Modfied_2")) +SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_2_1/Modfied_2")) SketchLine_15.setName("SketchLine_16") SketchLine_15.result().setName("SketchLine_16") SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result()) @@ -153,7 +153,7 @@ SketchLine_16 = Sketch_3.addLine(21, 45.99999999998655, 20.99999999998684, 0) SketchLine_16.setName("SketchLine_17") SketchLine_16.result().setName("SketchLine_17") SketchLine_16.setAuxiliary(True) -SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5")) +SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3")) SketchLine_17.setName("SketchLine_18") SketchLine_17.result().setName("SketchLine_18") SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchLine_17.result()) @@ -186,24 +186,24 @@ SketchConstraintDistance_5 = Sketch_3.setDistance(SketchCircle_6.center(), Sketc model.do() ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2f-SketchCircle_6_2r-SketchCircle_7_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) ExtrusionCut_3.result().setName("ExtrusionCut_3_1") -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_5")) -SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6")) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3")) +SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2")) SketchLine_19 = SketchProjection_1.createdFeature() SketchLine_19.setName("SketchLine_20") SketchLine_19.result().setName("SketchLine_20") -SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4")) +SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4")) SketchLine_20 = SketchProjection_2.createdFeature() SketchLine_20.setName("SketchLine_21") SketchLine_20.result().setName("SketchLine_21") SketchLine_21 = Sketch_4.addLine(4.999999999999999, -28, 37, -28) SketchLine_21.setName("SketchLine_22") SketchLine_21.result().setName("SketchLine_22") -SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5")) +SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3")) SketchLine_22.setName("SketchLine_23") SketchLine_22.result().setName("SketchLine_23") SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result()) SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35") -SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4")) +SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4")) SketchLine_23.setName("SketchLine_24") SketchLine_23.result().setName("SketchLine_24") SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_23.result()) @@ -292,19 +292,19 @@ SketchConstraintVertical_2 = Sketch_5.setVertical(SketchLine_30.result()) SketchConstraintVertical_3 = Sketch_5.setVertical(SketchLine_31.result()) SketchConstraintEqual_8 = Sketch_5.setEqual(SketchLine_29.result(), SketchLine_28.result()) SketchConstraintEqual_9 = Sketch_5.setEqual(SketchLine_31.result(), SketchLine_30.result()) -SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1")) +SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1")) SketchLine_32.setName("SketchLine_33") SketchLine_32.result().setName("SketchLine_33") SketchConstraintDistance_7 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_32.result(), 2) -SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1")) +SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1")) SketchLine_33.setName("SketchLine_34") SketchLine_33.result().setName("SketchLine_34") SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_31.startPoint(), SketchLine_33.result(), 2) -SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1")) +SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1")) SketchLine_34.setName("SketchLine_35") SketchLine_34.result().setName("SketchLine_35") SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_29.startPoint(), SketchLine_34.result(), 2) -SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1")) +SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1")) SketchLine_35.setName("SketchLine_36") SketchLine_35.result().setName("SketchLine_36") SketchConstraintDistance_10 = Sketch_5.setDistance(SketchLine_28.startPoint(), SketchLine_35.result(), 2) @@ -430,29 +430,29 @@ SketchConstraintLength_3 = Sketch_6.setLength(SketchLine_38.result(), 42) SketchConstraintLength_4 = Sketch_6.setLength(SketchLine_43.result(), 20) SketchConstraintLength_5 = Sketch_6.setLength(SketchLine_44.result(), 15) SketchConstraintLength_6 = Sketch_6.setLength(SketchLine_39.result(), 42) -SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2")) +SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6")) SketchLine_46 = SketchProjection_3.createdFeature() SketchLine_46.setName("SketchLine_47") SketchLine_46.result().setName("SketchLine_47") -SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&Extrusion_1_1/Generated_Face_3")) +SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&Extrusion_1_1/Generated_Face_5")) SketchLine_47 = SketchProjection_4.createdFeature() SketchLine_47.setName("SketchLine_48") SketchLine_47.result().setName("SketchLine_48") -SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2")) +SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6")) SketchLine_48 = SketchProjection_5.createdFeature() SketchLine_48.setName("SketchLine_49") SketchLine_48.result().setName("SketchLine_49") SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), SketchLine_46.result(), 2) SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17) model.do() -ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")]) +ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_5"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")]) ExtrusionCut_6.result().setName("ExtrusionCut_6_1") -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7")) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1")) SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655) SketchLine_49.setName("SketchLine_50") SketchLine_49.result().setName("SketchLine_50") SketchLine_49.setAuxiliary(True) -SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4")) +SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_4")) SketchLine_50.setName("SketchLine_51") SketchLine_50.result().setName("SketchLine_51") SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_49.startPoint(), SketchLine_50.result()) @@ -465,12 +465,12 @@ SketchLine_51 = Sketch_7.addLine(-38, -40.99999999998656, -38, -4.99999999998656 SketchLine_51.setName("SketchLine_52") SketchLine_51.result().setName("SketchLine_52") SketchLine_51.setAuxiliary(True) -SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4")) +SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_4")) SketchLine_52.setName("SketchLine_53") SketchLine_52.result().setName("SketchLine_53") SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result()) SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_77") -SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7")) +SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1")) SketchLine_53.setName("SketchLine_54") SketchLine_53.result().setName("SketchLine_54") SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_53.result()) @@ -492,7 +492,7 @@ SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/Ed SketchLine_54 = SketchProjection_6.createdFeature() SketchLine_54.setName("SketchLine_55") SketchLine_54.result().setName("SketchLine_55") -SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4")) +SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_4")) SketchLine_55 = SketchProjection_7.createdFeature() SketchLine_55.setName("SketchLine_56") SketchLine_55.result().setName("SketchLine_56") @@ -517,11 +517,11 @@ SketchConstraintMiddle_23 = Sketch_8.setMiddlePoint(SketchLine_56.result(), Sket SketchConstraintCoincidence_83 = Sketch_8.setCoincident(SketchLine_57.result(), SketchPoint_5.coordinates()) SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_84") SketchConstraintPerpendicular_1 = Sketch_8.setPerpendicular(SketchLine_57.result(), SketchLine_56.result()) -SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4")) +SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_4")) SketchLine_58 = SketchProjection_8.createdFeature() SketchLine_58.setName("SketchLine_59") SketchLine_58.result().setName("SketchLine_59") -SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1")) +SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7")) SketchLine_59 = SketchProjection_9.createdFeature() SketchLine_59.setName("SketchLine_60") SketchLine_59.result().setName("SketchLine_60") diff --git a/test.models/piece_09.py b/test.models/piece_09.py index 7af290633..969bfacd3 100644 --- a/test.models/piece_09.py +++ b/test.models/piece_09.py @@ -149,11 +149,11 @@ SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_1.result(), SketchA SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_10.result(), "d1*coeff") model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchArc_1_2f-SketchLine_3f-SketchArc_2_2r-SketchLine_4f-SketchArc_3_2r-SketchLine_5f-SketchArc_4_2f-SketchLine_6f-SketchLine_7r-SketchLine_8r-SketchArc_5_2r-SketchLine_9r-SketchArc_6_2f-SketchLine_10r-SketchArc_7_2f-SketchLine_11r-SketchArc_8_2r-SketchLine_12r-SketchLine_13r")], model.selection(), "epaisseur_plat*coeff", 0) -Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_19"), "d2*coeff", True) +Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), "d2*coeff", True) Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) -SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/Generated_Face_13")) +SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), False) SketchLine_14 = SketchProjection_1.createdFeature() -SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/To_Face_1")) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/To_Face_1"), False) SketchLine_15 = SketchProjection_2.createdFeature() SketchLine_16 = Sketch_2.addLine(-24.99999999999999, -35.00000000000001, -31.24999999999999, -35.00000000000001) SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_16.startPoint()) @@ -215,9 +215,9 @@ SketchConstraintDistance_13 = Sketch_2.setDistance(SketchArc_10.startPoint(), Sk #SketchConstraintDistance_14 = Sketch_2.setDistance(SketchLine_17.startPoint(), SketchLine_23.result(), "(e3-epaisseur_plat)*coeff") model.do() Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_16r-SketchArc_9_2f-SketchLine_17r-SketchArc_10_2f-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchArc_11_2r-SketchLine_21r-SketchArc_12_2r-SketchLine_22r-SketchLine_23f")], model.selection(), "d6*coeff", 0) -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face_9")) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face_3")) SketchLine_24 = Sketch_3.addLine(46.25, 22.91561885925604, 51.3, 20.00000000000001) -SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_9&Extrusion_2_1/To_Face_1")) +SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1")) #SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_24.startPoint(), SketchLine_25.result()) SketchLine_26 = Sketch_3.addLine(51.3, 20.00000000000001, 62.50000000000001, 20.00000000000001) SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchLine_24.endPoint(), SketchLine_26.startPoint()) @@ -245,9 +245,9 @@ SketchConstraintVertical_12 = Sketch_3.setVertical(SketchLine_27.result()) SketchConstraintVertical_13 = Sketch_3.setVertical(SketchLine_33.result()) SketchConstraintVertical_14 = Sketch_3.setVertical(SketchLine_31.result()) SketchConstraintAngle_1 = Sketch_3.setAngleComplementary(SketchLine_26.result(), SketchLine_24.result(), "angle") -SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_8&Extrusion_2_1/Generated_Face_7")) +SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_4")) SketchLine_34 = SketchProjection_3.createdFeature() -SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_11&Extrusion_2_1/Generated_Face_10")) +SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_1")) SketchLine_35 = SketchProjection_4.createdFeature() SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_28.endPoint(), SketchLine_34.result()) SketchConstraintDistance_15 = Sketch_3.setDistance(SketchLine_31.result(), SketchLine_33.endPoint(), "(d6-d5)*coeff") @@ -263,13 +263,13 @@ ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Ske ExtrusionCut_1.result().setName("ExtrusionCut_1_1") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchLine_33r")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_2.result().setName("ExtrusionCut_2_1") -Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_19"), "d3*coeff", True) +Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), "d3*coeff", True) Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2")) -SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_16&Extrusion_1_1/To_Face_1")) +SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_1")) SketchLine_36 = SketchProjection_5.createdFeature() SketchProjection_6 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_8&ExtrusionCut_2_1/Modfied_9")) SketchLine_37 = SketchProjection_6.createdFeature() -SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_15&Extrusion_1_1/Generated_Face_14")) +SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5")) SketchLine_38 = SketchProjection_7.createdFeature() SketchLine_39 = Sketch_4.addLine(-25, -35.00000000000001, -31.24999999999999, -35.00000000000001) SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_37).startPoint(), SketchLine_39.startPoint()) @@ -305,23 +305,23 @@ SketchConstraintDistance_19 = Sketch_4.setDistance(SketchLine_41.endPoint(), Ske SketchConstraintDistance_20 = Sketch_4.setDistance(SketchLine_41.startPoint(), SketchLine_39.result(), "h2") model.do() Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_39r-SketchArc_13_2f-SketchLine_40r-SketchLine_41r-SketchLine_42r-SketchArc_14_2r-SketchLine_43r-SketchLine_44f")], model.selection(), 0, "e1*coeff") -Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_6")) +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4")) SketchCircle_1 = Sketch_5.addCircle(70, 17.5, 3.125) -SketchLine_45 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_5")) +SketchLine_45 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_1_1/Modfied_4")) SketchConstraintDistance_21 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_45.result(), "d9*coeff") -SketchProjection_8 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8")) +SketchProjection_8 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/Generated_Face_11")) SketchLine_46 = SketchProjection_8.createdFeature() -SketchProjection_9 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_19")) +SketchProjection_9 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_1")) SketchLine_47 = SketchProjection_9.createdFeature() SketchConstraintDistance_22 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_47.result(), "d1*coeff") SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_1.results()[1], "r_trou") model.do() -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_6"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) ExtrusionCut_3.result().setName("ExtrusionCut_3_1") -Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_14")) +Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_6")) SketchCircle_2 = Sketch_6.addCircle(70, -17.5, 5) -SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/To_Face_1")) -SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_19&Extrusion_1_1/Generated_Face_18")) +SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1")) +SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1")) SketchLine_49 = SketchProjection_10.createdFeature() SketchConstraintDistance_23 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_49.result(), "d1*coeff") SketchConstraintDistance_23.setName("SketchConstraintDistance_24") @@ -330,15 +330,15 @@ SketchLine_50 = Sketch_6.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLi SketchConstraintDistance_24 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_50.result(), "d_trou") SketchConstraintDistance_24.setName("SketchConstraintDistance_25") model.do() -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_16"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) ExtrusionCut_4.result().setName("ExtrusionCut_4_1") -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8")) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_12")) SketchLine_51 = Sketch_7.addLine(110, 21.46600893000899, 110, 7.22841614740048) SketchLine_51.setAuxiliary(True) -SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8")) +SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/Generated_Face_11")) SketchConstraintCoincidence_65 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result()) SketchConstraintCoincidence_66 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_52.result()) -SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/From_Face_1&Extrusion_1_1/Generated_Face_8")) +SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/From_Face_1&Extrusion_1_1/Generated_Face_12")) SketchArc_15 = Sketch_7.addArc(102.5, 7.22841614740048, 110, 7.22841614740048, 104.5, 0, True) SketchConstraintCoincidence_67 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchArc_15.startPoint()) SketchConstraintTangent_29 = Sketch_7.setTangent(SketchLine_51.result(), SketchArc_15.results()[1]) @@ -355,11 +355,11 @@ SketchConstraintLength_5 = Sketch_7.setLength(SketchLine_54.result(), "5.5*coeff SketchLine_56 = Sketch_7.addLine(110, 12.5, 0, 12.5) SketchLine_56.setAuxiliary(True) SketchConstraintCoincidence_73 = Sketch_7.setCoincident(SketchLine_56.startPoint(), SketchLine_52.result()) -SketchLine_57 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_19")) +SketchLine_57 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_1")) SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_57.result()) SketchConstraintMiddle_1 = Sketch_7.setMiddlePoint(SketchLine_56.endPoint(), SketchLine_57.result()) SketchConstraintMiddle_2 = Sketch_7.setMiddlePoint(SketchLine_56.startPoint(), SketchLine_52.result()) -SketchProjection_11 = Sketch_7.addProjection(model.selection("EDGE", "Extrusion_1_1/To_Face_1&ExtrusionCut_4_1/Modfied_1")) +SketchProjection_11 = Sketch_7.addProjection(model.selection("EDGE", "Extrusion_1_1/To_Face_1&ExtrusionCut_4_1/Modfied_2")) SketchLine_58 = SketchProjection_11.createdFeature() SketchLine_59 = Sketch_7.addLine(55.00000000000002, 0, 55.00000000000002, 25) SketchLine_59.setAuxiliary(True) diff --git a/test.models/piece_12.py b/test.models/piece_12.py index 871763ffc..f4159d38f 100644 --- a/test.models/piece_12.py +++ b/test.models/piece_12.py @@ -354,7 +354,7 @@ ExtrusionCut_4.result().setName("ExtrusionCut_4_1") Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "22.5*coeff", False) Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "45*coeff", True) Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2")) -SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3")) +SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1")) SketchLine_18 = SketchProjection_3.createdFeature() SketchLine_18.setName("SketchLine_4") SketchLine_18.result().setName("SketchLine_4") @@ -435,7 +435,7 @@ SketchConstraintDistance_13.setName("SketchConstraintDistance_11") SketchConstraintDistance_14 = Sketch_3.setDistance(SketchLine_23.result(), SketchLine_25.startPoint(), "2.5*coeff") SketchConstraintDistance_14.setName("SketchConstraintDistance_12") model.do() -Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0) +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0) Boolean_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "ExtrusionCut_4_1")]) Boolean_1.result().setName("Boolean_1_1") ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "Boolean_1_1_1")]) @@ -526,7 +526,7 @@ SketchConstraintDistance_16.setName("SketchConstraintDistance_10") SketchConstraintLength_10 = Sketch_4.setLength(SketchLine_36.result(), 12.975642079145) SketchConstraintLength_10.setName("SketchConstraintLength_7") model.do() -Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0) +Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0) Boolean_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_6_1_1"), model.selection("SOLID", "Extrusion_4_1")], [model.selection("SOLID", "ExtrusionCut_6_1_2")]) Boolean_2.result().setName("Boolean_2_1") ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Boolean_2_1_1")]) @@ -635,12 +635,12 @@ SketchConstraintRadius_13 = Sketch_6.setRadius(SketchArc_20.results()[1], "r1*co SketchConstraintRadius_13.setName("SketchConstraintRadius_10") model.do() Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_33r-SketchArc_6_2r-SketchLine_36r-SketchLine_37f")], model.selection(), "77*coeff-h_p*coeff", 0) -Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face_3")) +Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face_1")) SketchLine_46 = Sketch_7.addLine(37, -8.881784197001252e-16, -22, 1.665334536937735e-15) SketchLine_46.setName("SketchLine_38") SketchLine_46.result().setName("SketchLine_38") SketchLine_46.setAuxiliary(True) -SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_3&Extrusion_6_1/To_Face_1")) +SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_1&Extrusion_6_1/To_Face_1")) SketchLine_47.setName("SketchLine_39") SketchLine_47.result().setName("SketchLine_39") SketchConstraintCoincidence_69 = Sketch_7.setCoincident(SketchLine_46.startPoint(), SketchLine_47.result()) @@ -677,19 +677,19 @@ model.do() ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")]) ExtrusionCut_9.result().setName("ExtrusionCut_9_1") ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_7_2r-SketchArc_10_2f-SketchLine_44r-SketchArc_12_2r-SketchArc_13_2r-SketchLine_48r-SketchLine_43f-SketchArc_14_2f"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_50f-SketchArc_15_2f-SketchArc_16_2r-SketchLine_51r-SketchArc_17_2r-SketchLine_52f"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchArc_8_2r-SketchArc_9_2f-SketchLine_42r-SketchLine_45f-SketchLine_46r-SketchArc_11_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modfied_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")]) -Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_2")) +Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_1")) SketchLine_50 = Sketch_8.addLine(37, 14.80042035331162, 37, -14) SketchLine_50.setName("SketchLine_56") SketchLine_50.result().setName("SketchLine_56") SketchLine_50.setAuxiliary(True) -SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_9_1/Modfied_2&Extrusion_6_1/To_Face_1")) +SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_9_1/Modfied_1&Extrusion_6_1/To_Face_1")) SketchLine_51.setName("SketchLine_57") SketchLine_51.result().setName("SketchLine_57") SketchConstraintCoincidence_73 = Sketch_8.setCoincident(SketchLine_50.startPoint(), SketchLine_51.result()) SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_81") SketchConstraintCoincidence_74 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_51.result()) SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_82") -SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_4&ExtrusionCut_9_1/Modfied_2")) +SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_4&ExtrusionCut_9_1/Modfied_1")) SketchLine_52.setName("SketchLine_58") SketchLine_52.result().setName("SketchLine_58") SketchArc_21 = Sketch_8.addArc(34, -14, 37, -14, 34.00000001126211, -17, True) @@ -733,19 +733,19 @@ SketchArc_22.result().setName("SketchArc_24") SketchArc_22.results()[1].setName("SketchArc_24_2") model.do() ExtrusionCut_11 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchArc_23_2r-SketchLine_59f-SketchLine_60r"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_24_2r-SketchLine_62f-SketchLine_63r")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "ExtrusionCut_9_1")]) -Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face_3")) +Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face_1")) SketchLine_58 = Sketch_9.addLine(-32, -19, -32, -3.575047476349699) SketchLine_58.setName("SketchLine_64") SketchLine_58.result().setName("SketchLine_64") SketchLine_58.setAuxiliary(True) -SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_3&Extrusion_5_1/Generated_Face_2")) +SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_1&Extrusion_5_1/Generated_Face_2")) SketchLine_59.setName("SketchLine_65") SketchLine_59.result().setName("SketchLine_65") SketchConstraintCoincidence_81 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result()) SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_89") SketchConstraintCoincidence_82 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchLine_59.result()) SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_90") -SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_3&Extrusion_5_1/From_Face_1")) +SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_1&Extrusion_5_1/From_Face_1")) SketchLine_60.setName("SketchLine_66") SketchLine_60.result().setName("SketchLine_66") SketchArc_23 = Sketch_9.addArc(-29, -19, -32, -19, -29.00002201340376, -22, False)