From: azv <azv@opencascade.com>
Date: Wed, 6 Dec 2017 11:33:06 +0000 (+0300)
Subject: Store information about user-defined names in the data model.
X-Git-Tag: V_2.10.0RC~93^2
X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=c8fd356b4c1e7fb116023cfc9bc4ac87915607b0;p=modules%2Fshaper.git

Store information about user-defined names in the data model.
---

diff --git a/src/BuildPlugin/Test/Test1920.py b/src/BuildPlugin/Test/Test1920.py
index 18323fefd..96f8eb6dc 100644
--- a/src/BuildPlugin/Test/Test1920.py
+++ b/src/BuildPlugin/Test/Test1920.py
@@ -44,7 +44,7 @@ model.do()
 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1r-SketchLine_3r-SketchLine_4r-SketchLine_5r")])
 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_5f")])
 Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")], model.selection("EDGE", "PartSet/OY"), 100)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Face_1_1/Translated_Edge_1"), model.selection("EDGE", "Face_1_1/Translated_Edge_2"), model.selection("EDGE", "Face_1_1/Translated_Edge_3"), model.selection("EDGE", "Face_1_1/Translated_Edge_4"), model.selection("EDGE", "Face_2_1/Translated_Edge_1"), model.selection("EDGE", "Face_2_1/Translated_Edge_2"), model.selection("EDGE", "Face_2_1/Translated_Edge_3"), model.selection("EDGE", "Face_2_1/Translated_Edge_4")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Translation_1_1/Translated_Edge_1"), model.selection("EDGE", "Translation_1_1/Translated_Edge_2"), model.selection("EDGE", "Translation_1_1/Translated_Edge_3"), model.selection("EDGE", "Translation_1_1/Translated_Edge_4"), model.selection("EDGE", "Translation_1_2/Translated_Edge_1"), model.selection("EDGE", "Translation_1_2/Translated_Edge_2"), model.selection("EDGE", "Translation_1_2/Translated_Edge_3"), model.selection("EDGE", "Translation_1_2/Translated_Edge_4")])
 aGroupFeature = Group_1.feature()
 aSelectionList = aGroupFeature.selectionList("group_list")
 model.end()
diff --git a/src/CollectionPlugin/Test/TestGroupMove2.py b/src/CollectionPlugin/Test/TestGroupMove2.py
index 298ba49dc..0f06d1dfd 100644
--- a/src/CollectionPlugin/Test/TestGroupMove2.py
+++ b/src/CollectionPlugin/Test/TestGroupMove2.py
@@ -31,7 +31,7 @@ Box_1 = model.addBox(Part_1_doc, 10, 10, 20)
 Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Box_1_1/Back&Box_1_1/Right&Box_1_1/Top"), model.selection("VERTEX", "Box_1_1/Front&Box_1_1/Left&Box_1_1/Top"), model.selection("VERTEX", "Box_1_1/Back&Box_1_1/Left&Box_1_1/Bottom"))
 Group_1 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "Box_1_1/Back&Box_1_1/Left&Box_1_1/Top")])
 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")])
-Remove_SubShapes_1 = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPSOLID", "Box_1_1"))
+Remove_SubShapes_1 = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPSOLID", "Partition_1_1"))
 Remove_SubShapes_1.setSubShapesToKeep([model.selection("SOLID", "Partition_1_1_2")])
 model.do()
 # move group
diff --git a/src/FeaturesPlugin/Test/Test1922.py b/src/FeaturesPlugin/Test/Test1922.py
index 4364f9ebf..a9224658b 100644
--- a/src/FeaturesPlugin/Test/Test1922.py
+++ b/src/FeaturesPlugin/Test/Test1922.py
@@ -97,38 +97,38 @@ SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchPoint_12.coordinat
 model.do()
 Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_6s-SketchLine_5e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_7"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_11"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_3s-SketchLine_2e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_10"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_8"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_9"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_2s-SketchLine_1e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_4s-SketchLine_3e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_13"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_6e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_14"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_6"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_4"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_5")])
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_1_2"), model.selection("VERTEX", "Vertex_1_3"), model.selection("VERTEX", "Vertex_1_4"), model.selection("VERTEX", "Vertex_1_5"), model.selection("VERTEX", "Vertex_1_6"), model.selection("VERTEX", "Vertex_1_7"), model.selection("VERTEX", "Vertex_1_8"), model.selection("VERTEX", "Vertex_1_9"), model.selection("VERTEX", "Vertex_1_10"), model.selection("VERTEX", "Vertex_1_11"), model.selection("VERTEX", "Vertex_1_12"), model.selection("VERTEX", "Vertex_1_13"), model.selection("VERTEX", "Vertex_1_14"), model.selection("VERTEX", "Vertex_1_15"), model.selection("VERTEX", "Vertex_1_16"), model.selection("VERTEX", "Vertex_1_17"), model.selection("VERTEX", "Vertex_1_18")], model.selection("EDGE", "PartSet/OZ"), 100, 0)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Vertex_1_12/To_Vertex_1"), model.selection("VERTEX", "Vertex_1_13/To_Vertex_1"), model.selection("VERTEX", "Vertex_1_3/To_Vertex_1"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_1_12/To_Vertex_1"), model.selection("VERTEX", "Extrusion_1_13/To_Vertex_1"), model.selection("VERTEX", "Extrusion_1_3/To_Vertex_1"))
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchLine_7 = Sketch_2.addLine(-717.0963364993213, -45.06817090071282, -717.0963364993213, -180.9380775505473)
-SketchPoint_13 = Sketch_2.addPoint(model.selection("VERTEX", "Vertex_1_12/To_Vertex_1"))
+SketchPoint_13 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_12/To_Vertex_1"))
 SketchPoint_13.setName("SketchPoint_15")
 SketchPoint_13.result().setName("SketchPoint_15")
 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchPoint_13.result())
-SketchPoint_14 = Sketch_2.addPoint(model.selection("VERTEX", "Vertex_1_1/To_Vertex_1"))
+SketchPoint_14 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/To_Vertex_1"))
 SketchPoint_14.setName("SketchPoint_16")
 SketchPoint_14.result().setName("SketchPoint_16")
 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchPoint_14.result())
 SketchLine_8 = Sketch_2.addLine(-717.0963364993213, -180.9380775505473, -102.0809741405142, -180.9380775505473)
 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
-SketchPoint_15 = Sketch_2.addPoint(model.selection("VERTEX", "Vertex_1_3/To_Vertex_1"))
+SketchPoint_15 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_3/To_Vertex_1"))
 SketchPoint_15.setName("SketchPoint_17")
 SketchPoint_15.result().setName("SketchPoint_17")
 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchPoint_15.result())
 SketchLine_9 = Sketch_2.addLine(-102.0809741405142, -180.9380775505473, -102.0809741405142, 193.0685819822336)
 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
-SketchPoint_16 = Sketch_2.addPoint(model.selection("VERTEX", "Vertex_1_10/To_Vertex_1"))
+SketchPoint_16 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_10/To_Vertex_1"))
 SketchPoint_16.setName("SketchPoint_18")
 SketchPoint_16.result().setName("SketchPoint_18")
 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchPoint_16.result())
 SketchLine_10 = Sketch_2.addLine(-102.0809741405142, 193.0685819822336, -254.8675173043772, 193.0685819822336)
 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
-SketchPoint_17 = Sketch_2.addPoint(model.selection("VERTEX", "Vertex_1_5/To_Vertex_1"))
+SketchPoint_17 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_5/To_Vertex_1"))
 SketchPoint_17.setName("SketchPoint_19")
 SketchPoint_17.result().setName("SketchPoint_19")
 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchPoint_17.result())
 SketchLine_11 = Sketch_2.addLine(-254.8675173043772, 193.0685819822336, -254.8675173043772, -45.06817090071281)
 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
-SketchPoint_18 = Sketch_2.addPoint(model.selection("VERTEX", "Vertex_1_9/To_Vertex_1"))
+SketchPoint_18 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_9/To_Vertex_1"))
 SketchPoint_18.setName("SketchPoint_20")
 SketchPoint_18.result().setName("SketchPoint_20")
 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchPoint_18.result())
@@ -138,16 +138,16 @@ SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchLine_7.startPoint(
 SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchPoint_13.coordinates(), SketchLine_12.endPoint())
 SketchLine_13 = Sketch_2.addLine(-599.2405881202537, -45.06817090071282, -584.124830393487, -180.9380775505472)
 SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchLine_13.startPoint(), SketchLine_12.result())
-SketchPoint_19 = Sketch_2.addPoint(model.selection("VERTEX", "Vertex_1_13/To_Vertex_1"))
+SketchPoint_19 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_13/To_Vertex_1"))
 SketchPoint_19.setName("SketchPoint_21")
 SketchPoint_19.result().setName("SketchPoint_21")
 SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchPoint_19.result())
 SketchLine_14 = Sketch_2.addLine(-356.1736770691994, -45.06817090071282, -342.6051560379917, -180.9380775505472)
-SketchPoint_20 = Sketch_2.addPoint(model.selection("VERTEX", "Vertex_1_15/To_Vertex_1"))
+SketchPoint_20 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_15/To_Vertex_1"))
 SketchPoint_20.setName("SketchPoint_22")
 SketchPoint_20.result().setName("SketchPoint_22")
 SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchPoint_20.result())
-SketchPoint_21 = Sketch_2.addPoint(model.selection("VERTEX", "Vertex_1_11/To_Vertex_1"))
+SketchPoint_21 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_11/To_Vertex_1"))
 SketchPoint_21.setName("SketchPoint_23")
 SketchPoint_21.result().setName("SketchPoint_23")
 SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_21.result())
@@ -161,7 +161,7 @@ Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-Sketc
 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_8f-SketchLine_12f-SketchLine_13f-SketchLine_14r")])
 Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_8f-SketchLine_9f-SketchLine_12f-SketchLine_14f-SketchLine_15r")])
 Face_4 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_9f-SketchLine_10f-SketchLine_11f-SketchLine_15f")])
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("EDGE", "Vertex_1_1"), model.selection("EDGE", "Vertex_1_2"), model.selection("EDGE", "Vertex_1_3"), model.selection("EDGE", "Vertex_1_4"), model.selection("EDGE", "Vertex_1_5"), model.selection("EDGE", "Vertex_1_6"), model.selection("EDGE", "Vertex_1_7"), model.selection("EDGE", "Vertex_1_8"), model.selection("EDGE", "Vertex_1_9"), model.selection("EDGE", "Vertex_1_10"), model.selection("EDGE", "Vertex_1_11"), model.selection("EDGE", "Vertex_1_12"), model.selection("EDGE", "Vertex_1_13"), model.selection("EDGE", "Vertex_1_14"), model.selection("EDGE", "Vertex_1_15"), model.selection("EDGE", "Vertex_1_16"), model.selection("EDGE", "Vertex_1_17"), model.selection("EDGE", "Vertex_1_18"), model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_4_1")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("EDGE", "Extrusion_1_1"), model.selection("EDGE", "Extrusion_1_2"), model.selection("EDGE", "Extrusion_1_3"), model.selection("EDGE", "Extrusion_1_4"), model.selection("EDGE", "Extrusion_1_5"), model.selection("EDGE", "Extrusion_1_6"), model.selection("EDGE", "Extrusion_1_7"), model.selection("EDGE", "Extrusion_1_8"), model.selection("EDGE", "Extrusion_1_9"), model.selection("EDGE", "Extrusion_1_10"), model.selection("EDGE", "Extrusion_1_11"), model.selection("EDGE", "Extrusion_1_12"), model.selection("EDGE", "Extrusion_1_13"), model.selection("EDGE", "Extrusion_1_14"), model.selection("EDGE", "Extrusion_1_15"), model.selection("EDGE", "Extrusion_1_16"), model.selection("EDGE", "Extrusion_1_17"), model.selection("EDGE", "Extrusion_1_18"), model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_4_1")])
 model.end()
 PartitionFeature = Partition_1.feature()
 assert(len(PartitionFeature.results()) == 1)
diff --git a/src/FeaturesPlugin/Test/Test1942.py b/src/FeaturesPlugin/Test/Test1942.py
index fedf186b2..93272c187 100644
--- a/src/FeaturesPlugin/Test/Test1942.py
+++ b/src/FeaturesPlugin/Test/Test1942.py
@@ -181,7 +181,7 @@ Recover_1 = model.addRecover(Part_1_doc, Partition_1, [Revolution_1.result()])
 Plane_5 = model.addPlane(Part_1_doc, model.selection("EDGE", "PartSet/Axis_4"), model.selection("VERTEX", "PartSet/Point_2"), True)
 Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchArc_2_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_5"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_7"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_8"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
 Intersection_1 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Recover_1_1")], [model.selection("FACE", "Face_1_1")])
-Group_1 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "Recover_1_1/Modified_Vertex_2_1"), model.selection("VERTEX", "Recover_1_1/Generated_Vertex_2"), model.selection("VERTEX", "Recover_1_1/Modified_Vertex_6_1"), model.selection("VERTEX", "Recover_1_1/Modified_Vertex_4_1"), model.selection("VERTEX", "Recover_1_1/Generated_Vertex_3"), model.selection("VERTEX", "Recover_1_1/Generated_Vertex_1"), model.selection("VERTEX", "Recover_1_1/Modified_Vertex_1_1"), model.selection("VERTEX", "Recover_1_1/Generated_Vertex_4"), model.selection("VERTEX", "Recover_1_1/Modified_Vertex_3_1"), model.selection("VERTEX", "Recover_1_1/Modified_Vertex_7_1"), model.selection("VERTEX", "Recover_1_1/Modified_Vertex_5_1")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "Intersection_1_1/Modified_Vertex_2_1"), model.selection("VERTEX", "Intersection_1_1/Generated_Vertex_2"), model.selection("VERTEX", "Intersection_1_1/Modified_Vertex_6_1"), model.selection("VERTEX", "Intersection_1_1/Modified_Vertex_4_1"), model.selection("VERTEX", "Intersection_1_1/Generated_Vertex_3"), model.selection("VERTEX", "Intersection_1_1/Generated_Vertex_1"), model.selection("VERTEX", "Intersection_1_1/Modified_Vertex_1_1"), model.selection("VERTEX", "Intersection_1_1/Generated_Vertex_4"), model.selection("VERTEX", "Intersection_1_1/Modified_Vertex_3_1"), model.selection("VERTEX", "Intersection_1_1/Modified_Vertex_7_1"), model.selection("VERTEX", "Intersection_1_1/Modified_Vertex_5_1")])
 Group_2 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Intersection_1_1_7"), model.selection("EDGE", "Intersection_1_1_6"), model.selection("EDGE", "Intersection_1_1_3"), model.selection("EDGE", "Intersection_1_1_11"), model.selection("EDGE", "Intersection_1_1_5"), model.selection("EDGE", "Intersection_1_1_1"), model.selection("EDGE", "Intersection_1_1_4"), model.selection("EDGE", "Intersection_1_1_2"), model.selection("EDGE", "Intersection_1_1_10"), model.selection("EDGE", "Intersection_1_1_9"), model.selection("EDGE", "Intersection_1_1_8")])
 model.end()
 
diff --git a/src/FeaturesPlugin/Test/Test2023.py b/src/FeaturesPlugin/Test/Test2023.py
index 8ac55527f..d025a0785 100644
--- a/src/FeaturesPlugin/Test/Test2023.py
+++ b/src/FeaturesPlugin/Test/Test2023.py
@@ -55,7 +55,7 @@ SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
 model.do()
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f")], model.selection(), 10, 110)
 Intersection_1 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Rotation_1 = model.addRotation(Part_1_doc, [model.selection("COMPOUND", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OZ"), 45)
+Rotation_1 = model.addRotation(Part_1_doc, [model.selection("COMPOUND", "Intersection_1_1")], model.selection("EDGE", "PartSet/OZ"), 45)
 model.end()
 
 assert(model.checkPythonDump())
diff --git a/src/FeaturesPlugin/Test/Test2038.py b/src/FeaturesPlugin/Test/Test2038.py
index 6d1aca8b6..8a98df7e9 100644
--- a/src/FeaturesPlugin/Test/Test2038.py
+++ b/src/FeaturesPlugin/Test/Test2038.py
@@ -40,9 +40,9 @@ model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_5r")], model.selection(), 100, 0)
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_5f")], model.selection(), 100, 0)
 Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OX"), 50)
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
-Translation_2 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OZ"), 50)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_1/Translated_Face_24"), model.selection("FACE", "Extrusion_1_1/Translated_Face_13"), model.selection("FACE", "Extrusion_1_1/Translated_Face_16"), model.selection("FACE", "Extrusion_1_1/Translated_Face_12"), model.selection("FACE", "Extrusion_1_1/Translated_Face_9"), model.selection("FACE", "Extrusion_1_1/Translated_Face_10"), model.selection("FACE", "Extrusion_1_1/Translated_Face_11"), model.selection("FACE", "Extrusion_1_1/Translated_Face_25"), model.selection("FACE", "Extrusion_1_1/Translated_Face_20"), model.selection("FACE", "Extrusion_1_1/Translated_Face_19"), model.selection("FACE", "Extrusion_1_1/Translated_Face_18"), model.selection("FACE", "Extrusion_1_1/Translated_Face_27"), model.selection("FACE", "Extrusion_1_1/Translated_Face_17"), model.selection("FACE", "Extrusion_1_1/Translated_Face_31"), model.selection("FACE", "Extrusion_1_1/Translated_Face_32"), model.selection("FACE", "Extrusion_1_1/Translated_Face_30"), model.selection("FACE", "Extrusion_1_1/Translated_Face_28"), model.selection("FACE", "Extrusion_1_1/Translated_Face_29"), model.selection("FACE", "Extrusion_1_1/Translated_Face_8"), model.selection("FACE", "Extrusion_1_1/Translated_Face_22"), model.selection("FACE", "Extrusion_1_1/Translated_Face_7"), model.selection("FACE", "Extrusion_1_1/Translated_Face_6"), model.selection("FACE", "Extrusion_1_1/Translated_Face_5"), model.selection("FACE", "Extrusion_1_1/Translated_Face_3"), model.selection("FACE", "Extrusion_1_1/Translated_Face_1"), model.selection("FACE", "Extrusion_1_1/Translated_Face_2"), model.selection("FACE", "Extrusion_1_1/Translated_Face_21"), model.selection("FACE", "Extrusion_1_1/Translated_Face_4"), model.selection("FACE", "Extrusion_1_1/Translated_Face_25"), model.selection("FACE", "Extrusion_1_1/Translated_Face_27"), model.selection("FACE", "Extrusion_1_1/Translated_Face_21"), model.selection("FACE", "Extrusion_1_1/Translated_Face_22"), model.selection("FACE", "Extrusion_1_1/Translated_Face_26"), model.selection("FACE", "Extrusion_1_1/Translated_Face_23"), model.selection("FACE", "Extrusion_1_1/Translated_Face_30"), model.selection("FACE", "Extrusion_1_1/Translated_Face_23"), model.selection("FACE", "Extrusion_1_1/Translated_Face_14"), model.selection("FACE", "Extrusion_1_1/Translated_Face_15")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Translation_1_1"), model.selection("SOLID", "Extrusion_2_1")])
+Translation_2 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_1_1")], model.selection("EDGE", "PartSet/OZ"), 50)
+Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Translation_2_1/Translated_Face_24"), model.selection("FACE", "Translation_2_1/Translated_Face_13"), model.selection("FACE", "Translation_2_1/Translated_Face_16"), model.selection("FACE", "Translation_2_1/Translated_Face_12"), model.selection("FACE", "Translation_2_1/Translated_Face_9"), model.selection("FACE", "Translation_2_1/Translated_Face_10"), model.selection("FACE", "Translation_2_1/Translated_Face_11"), model.selection("FACE", "Translation_2_1/Translated_Face_25"), model.selection("FACE", "Translation_2_1/Translated_Face_20"), model.selection("FACE", "Translation_2_1/Translated_Face_19"), model.selection("FACE", "Translation_2_1/Translated_Face_18"), model.selection("FACE", "Translation_2_1/Translated_Face_27"), model.selection("FACE", "Translation_2_1/Translated_Face_17"), model.selection("FACE", "Translation_2_1/Translated_Face_31"), model.selection("FACE", "Translation_2_1/Translated_Face_32"), model.selection("FACE", "Translation_2_1/Translated_Face_30"), model.selection("FACE", "Translation_2_1/Translated_Face_28"), model.selection("FACE", "Translation_2_1/Translated_Face_29"), model.selection("FACE", "Translation_2_1/Translated_Face_8"), model.selection("FACE", "Translation_2_1/Translated_Face_22"), model.selection("FACE", "Translation_2_1/Translated_Face_7"), model.selection("FACE", "Translation_2_1/Translated_Face_6"), model.selection("FACE", "Translation_2_1/Translated_Face_5"), model.selection("FACE", "Translation_2_1/Translated_Face_3"), model.selection("FACE", "Translation_2_1/Translated_Face_1"), model.selection("FACE", "Translation_2_1/Translated_Face_2"), model.selection("FACE", "Translation_2_1/Translated_Face_21"), model.selection("FACE", "Translation_2_1/Translated_Face_4"), model.selection("FACE", "Translation_2_1/Translated_Face_25"), model.selection("FACE", "Translation_2_1/Translated_Face_27"), model.selection("FACE", "Translation_2_1/Translated_Face_21"), model.selection("FACE", "Translation_2_1/Translated_Face_22"), model.selection("FACE", "Translation_2_1/Translated_Face_26"), model.selection("FACE", "Translation_2_1/Translated_Face_23"), model.selection("FACE", "Translation_2_1/Translated_Face_30"), model.selection("FACE", "Translation_2_1/Translated_Face_23"), model.selection("FACE", "Translation_2_1/Translated_Face_14"), model.selection("FACE", "Translation_2_1/Translated_Face_15")])
 #Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Translation_2_1_6/Translated_Face_1"), model.selection("FACE", "Translation_2_1_5/Translated_Face_1"), model.selection("FACE", "Translation_2_1_5/Translated_Face_4"), model.selection("FACE", "Translation_2_1_4/Translated_Face_4"), model.selection("FACE", "Translation_2_1_5/Translated_Face_3"), model.selection("FACE", "Translation_2_1_5/Translated_Face_2"), model.selection("FACE", "Translation_2_1_5/Translated_Face_5"), model.selection("FACE", "Translation_2_1_7/Translated_Face_5"), model.selection("FACE", "Translation_2_1_6/Translated_Face_5"), model.selection("FACE", "Translation_2_1_4/Translated_Face_1"), model.selection("FACE", "Translation_2_1_2/Translated_Face_2"), model.selection("FACE", "Translation_2_1_5/Translated_Face_5"), model.selection("FACE", "Translation_2_1_2/Translated_Face_1"), model.selection("FACE", "Translation_2_1_4/Translated_Face_5"), model.selection("FACE", "Translation_2_1_2/Translated_Face_3"), model.selection("FACE", "Translation_2_1_3/Translated_Face_5"), model.selection("FACE", "Translation_2_1_1/Translated_Face_3"), model.selection("FACE", "Translation_2_1_4/Translated_Face_2"), model.selection("FACE", "Translation_2_1_2/Translated_Face_3"), model.selection("FACE", "Translation_2_1_1/Translated_Face_4"), model.selection("FACE", "Translation_2_1_1/Translated_Face_1"), model.selection("FACE", "Translation_2_1_1/Translated_Face_2"), model.selection("FACE", "Translation_2_1_3/Translated_Face_4"), model.selection("FACE", "Translation_2_1_4/Translated_Face_3"), model.selection("FACE", "Translation_2_1_3/Translated_Face_5"), model.selection("FACE", "Translation_2_1_3/Translated_Face_2"), model.selection("FACE", "Translation_2_1_3/Translated_Face_3"), model.selection("FACE", "Translation_2_1_3/Translated_Face_1"), model.selection("FACE", "Translation_2_1_7/Translated_Face_3"), model.selection("FACE", "Translation_2_1_7/Translated_Face_5"), model.selection("FACE", "Translation_2_1_7/Translated_Face_4"), model.selection("FACE", "Translation_2_1_7/Translated_Face_1"), model.selection("FACE", "Translation_2_1_7/Translated_Face_2"), model.selection("FACE", "Translation_2_1_6/Translated_Face_4"), model.selection("FACE", "Translation_2_1_4/Translated_Face_5"), model.selection("FACE", "Translation_2_1_6/Translated_Face_5"), model.selection("FACE", "Translation_2_1_6/Translated_Face_2"), model.selection("FACE", "Translation_2_1_6/Translated_Face_3")])
 
 model.end()
diff --git a/src/FeaturesPlugin/Test/Test2046.py b/src/FeaturesPlugin/Test/Test2046.py
index ef5cdc48e..72c1b77f1 100644
--- a/src/FeaturesPlugin/Test/Test2046.py
+++ b/src/FeaturesPlugin/Test/Test2046.py
@@ -33,7 +33,7 @@ Part_1 = model.addPart(partSet)
 Part_1_doc = Part_1.document()
 Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_3")])
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 100, 0)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Wire_1_1/Generated_Face_3"), model.selection("FACE", "Wire_1_1/Generated_Face_2"), model.selection("FACE", "Wire_1_1/Generated_Face_1")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), model.selection("FACE", "Extrusion_1_1/Generated_Face_2"), model.selection("FACE", "Extrusion_1_1/Generated_Face_1")])
 model.do()
 model.end()
 
diff --git a/src/FeaturesPlugin/Test/Test2194.py b/src/FeaturesPlugin/Test/Test2194.py
index 132418690..fc260d330 100644
--- a/src/FeaturesPlugin/Test/Test2194.py
+++ b/src/FeaturesPlugin/Test/Test2194.py
@@ -34,7 +34,7 @@ SketchCircle_3 = Sketch_2.addCircle(-41.97827733564338, 89.35676702647821, 6.102
 model.do()
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), 10, 0)
 Boolean_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
-Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_2_2/To_Face_1"), model.selection("FACE", "Extrusion_2_2/From_Face_1"), model.selection("FACE", "Extrusion_2_2/Generated_Face_1"), model.selection("FACE", "Extrusion_2_1/From_Face_1"), model.selection("FACE", "Boolean_1_1_1/Modified_Face_1"), model.selection("FACE", "_Extrusion_1_1/From_Face_1"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_1"), model.selection("FACE", "Extrusion_2_2/From_Face_1"), model.selection("FACE", "Extrusion_2_1/Generated_Face_1"), model.selection("FACE", "Extrusion_2_1/From_Face_1"), model.selection("FACE", "Extrusion_2_1/To_Face_1")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_2_2/To_Face_1"), model.selection("FACE", "Extrusion_2_2/From_Face_1"), model.selection("FACE", "Extrusion_2_2/Generated_Face_1"), model.selection("FACE", "Extrusion_2_1/From_Face_1"), model.selection("FACE", "Boolean_1_1_1/Modified_Face_1"), model.selection("FACE", "Extrusion_1_1/From_Face_1"), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), model.selection("FACE", "Extrusion_2_2/From_Face_1"), model.selection("FACE", "Extrusion_2_1/Generated_Face_1"), model.selection("FACE", "Extrusion_2_1/From_Face_1"), model.selection("FACE", "Extrusion_2_1/To_Face_1")])
 model.do()
 model.end()
 
diff --git a/src/FeaturesPlugin/Test/Test2197_2.py b/src/FeaturesPlugin/Test/Test2197_2.py
index 54e1020c3..c32cd440b 100644
--- a/src/FeaturesPlugin/Test/Test2197_2.py
+++ b/src/FeaturesPlugin/Test/Test2197_2.py
@@ -29,9 +29,9 @@ SketchCircle_1 = Sketch_1.addCircle(-150, 80, 100)
 model.do()
 Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")])
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Face_1_1")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Face_1_1/Base_Edge_1")])
-Group_2 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Face_1_1/Lateral_Edge_1")])
-Group_3 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "Face_1_1/Lateral_Edge_1&Face_1_1/Base_Edge_1")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Base_Edge_1")])
+Group_2 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Lateral_Edge_1")])
+Group_3 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "Revolution_1_1/Lateral_Edge_1&Revolution_1_1/Base_Edge_1")])
 model.end()
 
 # check that resulting group selection is valid
diff --git a/src/FeaturesPlugin/Test/Test2240.py b/src/FeaturesPlugin/Test/Test2240.py
index bab4cc8ba..b333c18d1 100644
--- a/src/FeaturesPlugin/Test/Test2240.py
+++ b/src/FeaturesPlugin/Test/Test2240.py
@@ -129,21 +129,17 @@ Face_5 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-Sketc
 MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_9"), "length_assemblage", 4, model.selection("EDGE", "PartSet/OY"), "length_assemblage", 2)
 Recover_1 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_1_1")], model.selection("VERTEX", "Sketch_3/Vertex-SketchPoint_1-SketchLine_12s-SketchLine_11e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_6s-SketchLine_5e"))
-Translation_1.result().setName("Translation_1_1")
 MultiTranslation_2 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_1_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 4, model.selection("EDGE", "PartSet/OY"), "length_assemblage", 2)
 Recover_2 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 Translation_2 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_2_1")], model.selection("VERTEX", "Sketch_3/Vertex-SketchPoint_1-SketchLine_12s-SketchLine_11e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_4s-SketchLine_3e"))
-Translation_2.result().setName("Translation_2_1")
 MultiTranslation_3 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_2_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 4)
 Recover_3 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
-Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_9s-SketchLine_7e"), model.selection("VERTEX", "Translation_2_1/Translated_Edge_1_4&Translation_2_1/Translated_Edge_1_1"))
-Translation_3.result().setName("Translation_3_1")
+Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_9s-SketchLine_7e"), model.selection("VERTEX", "MultiTranslation_3_1/Translated_Edge_1_4&MultiTranslation_3_1/Translated_Edge_1_1"))
 MultiTranslation_4 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_3_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 3)
 Recover_4 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_9s-SketchLine_7e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_10s"))
-Translation_4.result().setName("Translation_4_1")
 MultiTranslation_5 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_4_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 2)
-Partition_2 = model.addPartition(Part_1_doc, [model.selection("COMPOUND", "Face_1_1"), model.selection("COMPOUND", "Face_5_1"), model.selection("COMPOUND", "Translation_1_1"), model.selection("COMPOUND", "Translation_2_1"), model.selection("COMPOUND", "Translation_3_1"), model.selection("COMPOUND", "Translation_4_1")])
+Partition_2 = model.addPartition(Part_1_doc, [model.selection("COMPOUND", "Partition_1_1"), model.selection("COMPOUND", "MultiTranslation_1_1"), model.selection("COMPOUND", "MultiTranslation_2_1"), model.selection("COMPOUND", "MultiTranslation_3_1"), model.selection("COMPOUND", "MultiTranslation_4_1"), model.selection("COMPOUND", "MultiTranslation_5_1")])
 model.end()
 
 # check that partition constructed correctly
diff --git a/src/FeaturesPlugin/Test/Test2246.py b/src/FeaturesPlugin/Test/Test2246.py
index be0c82b1d..c178e45ab 100644
--- a/src/FeaturesPlugin/Test/Test2246.py
+++ b/src/FeaturesPlugin/Test/Test2246.py
@@ -39,7 +39,7 @@ SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.startPoint(),
 model.do()
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), 360, 0)
 Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], model.selection("EDGE", "PartSet/OY"), 150)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "Revolution_1_1/Translated_Vertex_1"), model.selection("VERTEX", "Revolution_1_1/Translated_Vertex_2")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "Translation_1_1/Translated_Vertex_1"), model.selection("VERTEX", "Translation_1_1/Translated_Vertex_2")])
 model.end()
 
 # check that resulting group selection is valid, names exist and different
diff --git a/src/FeaturesPlugin/Test/Test2255.py b/src/FeaturesPlugin/Test/Test2255.py
index 6312d5989..92193a3a5 100644
--- a/src/FeaturesPlugin/Test/Test2255.py
+++ b/src/FeaturesPlugin/Test/Test2255.py
@@ -46,7 +46,7 @@ Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-Sketc
 Wire_2 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")])
 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Wire_1_1")])
 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Wire_2_1")])
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Wire_1_1"), model.selection("FACE", "Wire_2_1")], model.selection(), 50, 0)
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")], model.selection(), 50, 0)
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
 SketchLine_5 = Sketch_2.addLine(49.62901186301215, 25.3130971701971, 39.15939470736273, 25.3130971701971)
 SketchLine_6 = Sketch_2.addLine(39.15939470736273, 25.3130971701971, 39.15939470736273, 38.96586914453801)
@@ -61,7 +61,7 @@ SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
 model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_5r-SketchLine_6r-SketchLine_7r-SketchLine_8r")], model.selection(), 50, 50, [model.selection("SOLID", "Wire_1_1"), model.selection("SOLID", "Wire_2_1")])
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_5r-SketchLine_6r-SketchLine_7r-SketchLine_8r")], model.selection(), 50, 50, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
 model.do()
 model.end()
 
diff --git a/src/FeaturesPlugin/Test/TestBooleanFillWithPlane.py b/src/FeaturesPlugin/Test/TestBooleanFillWithPlane.py
index 31a1b4b0f..61f040a44 100644
--- a/src/FeaturesPlugin/Test/TestBooleanFillWithPlane.py
+++ b/src/FeaturesPlugin/Test/TestBooleanFillWithPlane.py
@@ -52,7 +52,7 @@ SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 100, 0)
 Boolean_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1_2")], [model.selection("FACE", "PartSet/YOZ")])
-Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Boolean_1_1_4/Modified_Face_5"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_2"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_1"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_7"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_4"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_3"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_5"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_10"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_9"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_5"), model.selection("FACE", "Boolean_1_1_1/Modified_Face_1"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_7"), model.selection("FACE", "Boolean_1_1_1/Modified_Face_2"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_4"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_11"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_4"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_12"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_5"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_5"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_2"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_3"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_1"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_4"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_4"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_4"), model.selection("FACE", "_Extrusion_1_1/To_Face_3"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_3"), model.selection("FACE", "_Extrusion_1_1/From_Face_3"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_1"), model.selection("FACE", "_Extrusion_1_1/Generated_Face_2")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Boolean_1_1_4/Modified_Face_5"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_2"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_1"), model.selection("FACE", "Extrusion_1_1/Generated_Face_7"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_4"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_3"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_5"), model.selection("FACE", "Extrusion_1_1/Generated_Face_10"), model.selection("FACE", "Extrusion_1_1/Generated_Face_9"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_5"), model.selection("FACE", "Boolean_1_1_1/Modified_Face_1"), model.selection("FACE", "Extrusion_1_1/Generated_Face_7"), model.selection("FACE", "Boolean_1_1_1/Modified_Face_2"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_4"), model.selection("FACE", "Extrusion_1_1/Generated_Face_11"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_4"), model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), model.selection("FACE", "Extrusion_1_1/Generated_Face_5"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_5"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_2"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_3"), model.selection("FACE", "Boolean_1_1_4/Modified_Face_1"), model.selection("FACE", "Boolean_1_1_3/Modified_Face_4"), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("FACE", "Extrusion_1_1/To_Face_3"), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), model.selection("FACE", "Extrusion_1_1/From_Face_3"), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), model.selection("FACE", "Extrusion_1_1/Generated_Face_2")])
 model.do()
 model.end()
 
diff --git a/src/Model/Model_Data.cpp b/src/Model/Model_Data.cpp
index 49bca1d27..89c138892 100644
--- a/src/Model/Model_Data.cpp
+++ b/src/Model/Model_Data.cpp
@@ -58,6 +58,7 @@
 #include <TDataStd_Name.hxx>
 #include <TDataStd_AsciiString.hxx>
 #include <TDataStd_IntegerArray.hxx>
+#include <TDataStd_UAttribute.hxx>
 #include <TDF_AttributeIterator.hxx>
 #include <TDF_ChildIterator.hxx>
 #include <TDF_RelocationTable.hxx>
@@ -75,6 +76,9 @@ static const int kFlagInHistory = 0;
 static const int kFlagDisplayed = 1;
 //                             2 - is deleted (for results) or not
 static const int kFlagDeleted = 2;
+// TDataStd_Integer - 0 if the name of the object is generated automatically,
+//                    otherwise the name is defined by user
+Standard_GUID kUSER_DEFINED_NAME("9c694d18-a83c-4a56-bc9b-8020628a8244");
 
 // invalid data
 const static std::shared_ptr<ModelAPI_Data> kInvalid(new Model_Data());
@@ -127,8 +131,11 @@ void Model_Data::setName(const std::string& theName)
     isModified = true;
   } else {
     isModified = !aName->Get().IsEqual(theName.c_str());
-    if (isModified)
+    if (isModified) {
       aName->Set(theName.c_str());
+      // name is changed, thus special attribute is set
+      TDataStd_UAttribute::Set(myLab, kUSER_DEFINED_NAME);
+    }
   }
   if (mySendAttributeUpdated && isModified)
     ModelAPI_ObjectRenamedMessage::send(myObject, anOldName, theName, this);
@@ -141,6 +148,11 @@ void Model_Data::setName(const std::string& theName)
 #endif
 }
 
+bool Model_Data::hasUserDefinedName() const
+{
+  return myLab.IsAttribute(kUSER_DEFINED_NAME);
+}
+
 AttributePtr Model_Data::addAttribute(const std::string& theID, const std::string theAttrType)
 {
   AttributePtr aResult;
diff --git a/src/Model/Model_Data.h b/src/Model/Model_Data.h
index 836c4d646..8d12bc4d3 100644
--- a/src/Model/Model_Data.h
+++ b/src/Model/Model_Data.h
@@ -104,6 +104,8 @@ class Model_Data : public ModelAPI_Data
   MODEL_EXPORT virtual std::string name();
   /// Defines the name of the feature visible by the user in the object browser
   MODEL_EXPORT virtual void setName(const std::string& theName);
+  /// Return \c true if the object has been renamed by the user
+  MODEL_EXPORT virtual bool hasUserDefinedName() const;
   /// Returns the attribute that references to another document
   MODEL_EXPORT virtual std::shared_ptr<ModelAPI_AttributeDocRef> document(const std::string& theID);
   /// Returns the attribute that contains real value with double precision
diff --git a/src/Model/Model_Objects.cpp b/src/Model/Model_Objects.cpp
index abbb5309d..1da563d21 100644
--- a/src/Model/Model_Objects.cpp
+++ b/src/Model/Model_Objects.cpp
@@ -1119,8 +1119,10 @@ bool Model_Objects::hasCustomName(DataPtr theFeatureData,
     return false;
   }
 
-  theParentName = ModelAPI_Tools::getDefaultName(theResult, theResultIndex);
-  return true;
+  std::pair<std::string, bool> aName = ModelAPI_Tools::getDefaultName(theResult, theResultIndex);
+  if (aName.second)
+    theParentName = aName.first;
+  return aName.second;
 }
 
 void Model_Objects::storeResult(std::shared_ptr<ModelAPI_Data> theFeatureData,
@@ -1133,7 +1135,11 @@ void Model_Objects::storeResult(std::shared_ptr<ModelAPI_Data> theFeatureData,
   if (theResult->data()->name().empty()) {
     // if was not initialized, generate event and set a name
     std::string aNewName = theFeatureData->name();
-    if (!hasCustomName(theFeatureData, theResult, theResultIndex, aNewName)) {
+    if (hasCustomName(theFeatureData, theResult, theResultIndex, aNewName)) {
+      // if the name of result is user-defined, then, at first time, assign name of the result
+      // by empty string to be sure that corresponding flag in the data model is set
+      theResult->data()->setName("");
+    } else {
       std::stringstream aName;
       aName << aNewName;
       // if there are several results (issue #899: any number of result),
diff --git a/src/ModelAPI/ModelAPI_Data.h b/src/ModelAPI/ModelAPI_Data.h
index e1848123e..2fc8fbfc8 100644
--- a/src/ModelAPI/ModelAPI_Data.h
+++ b/src/ModelAPI/ModelAPI_Data.h
@@ -74,9 +74,10 @@ class MODELAPI_EXPORT ModelAPI_Data
 
   /// Returns the name of the feature visible by the user in the object browser
   virtual std::string name() = 0;
-
   /// Defines the name of the feature visible by the user in the object browser
   virtual void setName(const std::string& theName) = 0;
+  /// Return \c true if the object has been renamed by the user
+  virtual bool hasUserDefinedName() const = 0;
 
   /// Returns the attribute that references to another document
   virtual std::shared_ptr<ModelAPI_AttributeDocRef> document(const std::string& theID) = 0;
diff --git a/src/ModelAPI/ModelAPI_Tools.cpp b/src/ModelAPI/ModelAPI_Tools.cpp
index 90d41f656..1e57d36b7 100755
--- a/src/ModelAPI/ModelAPI_Tools.cpp
+++ b/src/ModelAPI/ModelAPI_Tools.cpp
@@ -625,8 +625,9 @@ void getConcealedResults(const FeaturePtr& theFeature,
   }
 }
 
-std::string getDefaultName(const std::shared_ptr<ModelAPI_Result>& theResult,
-                           const int theResultIndex)
+std::pair<std::string, bool> getDefaultName(
+    const std::shared_ptr<ModelAPI_Result>& theResult,
+    const int theResultIndex)
 {
   typedef std::list< std::pair < std::string, std::list<ObjectPtr> > > ListOfReferences;
 
@@ -648,7 +649,7 @@ std::string getDefaultName(const std::shared_ptr<ModelAPI_Result>& theResult,
       if (aCompSolidRes == *anIt)
         break;
     aDefaultName << "_" << (aCompSolidResultIndex + 1) << "_" << (theResultIndex + 1);
-    return aDefaultName.str();
+    return std::pair<std::string, bool>(aDefaultName.str(), false);
   }
 
   DataPtr aData = anOwner->data();
@@ -695,7 +696,11 @@ std::string getDefaultName(const std::shared_ptr<ModelAPI_Result>& theResult,
       ResultCompSolidPtr aParentCompSolid = ModelAPI_Tools::compSolidOwner(anObjRes);
       if (aParentCompSolid)
         anObjRes = aParentCompSolid;
-      return anObjRes->data()->name();
+
+      // return name of reference result only if it has been renamed by the user,
+      // in other case compose a default name
+      if (anObjRes->data()->hasUserDefinedName())
+        return std::pair<std::string, bool>(anObjRes->data()->name(), true);
     }
   }
 
@@ -706,7 +711,7 @@ std::string getDefaultName(const std::shared_ptr<ModelAPI_Result>& theResult,
   // add unique prefix starting from second
   if (theResultIndex > 0 || theResult->groupName() == ModelAPI_ResultBody::group())
     aDefaultName << "_" << theResultIndex + 1;
-  return aDefaultName.str();
+  return std::pair<std::string, bool>(aDefaultName.str(), false);
 }
 
 } // namespace ModelAPI_Tools
diff --git a/src/ModelAPI/ModelAPI_Tools.h b/src/ModelAPI/ModelAPI_Tools.h
index 1a2db5e05..e7c297b30 100755
--- a/src/ModelAPI/ModelAPI_Tools.h
+++ b/src/ModelAPI/ModelAPI_Tools.h
@@ -188,9 +188,12 @@ MODELAPI_EXPORT void getConcealedResults(const std::shared_ptr<ModelAPI_Feature>
                                    std::list<std::shared_ptr<ModelAPI_Result> >& theResults);
 
 /*! Return the default name of the result according the the features it depends.
+ *  Return also whether the name is get from the concealing result of parent object
+ *  (means that concealing result has user-defined name).
  */
-MODELAPI_EXPORT std::string getDefaultName(const std::shared_ptr<ModelAPI_Result>& theResult,
-                                           const int theResultIndex);
+MODELAPI_EXPORT std::pair<std::string, bool> getDefaultName(
+    const std::shared_ptr<ModelAPI_Result>& theResult,
+    const int theResultIndex);
 }
 
 #endif
diff --git a/src/ModelAPI/Test/Test1512.py b/src/ModelAPI/Test/Test1512.py
index 25aba1f26..b9e7e44ae 100755
--- a/src/ModelAPI/Test/Test1512.py
+++ b/src/ModelAPI/Test/Test1512.py
@@ -155,13 +155,13 @@ def check_owner(selection, topology_type, feature):
   aSession.abortOperation()
 
 # check faces
-check_owner("_Extrusion_1_1/Generated_Face_1", "face", aBox)
-check_owner("Extrusion_3_1/Modified_Face_3", "face", aBox)
-check_owner("Extrusion_1_1/Modified_Face_1", "face", aHoleExt)
-check_owner("Extrusion_3_1/Modified_Face_2", "face", aTower)
+check_owner("Extrusion_1_1/Generated_Face_1", "face", aBox)
+check_owner("Boolean_2_1/Modified_Face_3", "face", aBox)
+check_owner("Boolean_1_1/Modified_Face_1", "face", aHoleExt)
+check_owner("Boolean_2_1/Modified_Face_2", "face", aTower)
 # check edges without ambiguity
-check_owner("Extrusion_3_1/Modified_Face_3&_Extrusion_1_1/Generated_Face_2", "edge", aBox)
-check_owner("Extrusion_3_1/Modified_Face_2&_Extrusion_3_1/To_Face_1", "edge", aTower)
+check_owner("Boolean_2_1/Modified_Face_3&Extrusion_1_1/Generated_Face_2", "edge", aBox)
+check_owner("Boolean_2_1/Modified_Face_2&Extrusion_3_1/To_Face_1_1", "edge", aTower)
 
 # check the connected topology method: solid is not a compound of connected topology
 assert(aFuse.firstResult().shape().isConnectedTopology() == False)
diff --git a/src/ModelAPI/Test/Test1757.py b/src/ModelAPI/Test/Test1757.py
index 431f7300d..52f4dcb21 100644
--- a/src/ModelAPI/Test/Test1757.py
+++ b/src/ModelAPI/Test/Test1757.py
@@ -79,8 +79,8 @@ model.do()
 #=========================================================================
 # Make a cylindrical hole using one of the produced faces
 #=========================================================================
-ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection(), 0, model.selection("FACE", "_Extrusion_1_1/Generated_Face_2"), 0, [model.selection("SOLID", "Extrusion_1_1")])
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Modfied_4"))
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"))
 SketchCircle_1 = Sketch_3.addCircle(143.412751420315, -228.52745656314, 32.158435160764)
 ExtrusionCut_2.setNestedSketch(Sketch_3)
 
@@ -92,8 +92,8 @@ Part_1.document().setCurrentFeature(ExtrusionCut_1.feature(), True)
 #=========================================================================
 # Modify the cylindrical hole base face by another groove in the history before the hole is created
 #=========================================================================
-ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection(), 0, model.selection("FACE", "__Extrusion_1_1/Generated_Face_3"), -50, [model.selection("SOLID", "Extrusion_1_1")])
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "__Extrusion_1_1/Generated_Face_1"))
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), -50, [model.selection("SOLID", "ExtrusionCut_1_1")])
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"))
 SketchLine_9 = Sketch_4.addLine(-176.701443076057, -151.212050129331, -91.83965287802501, -151.212050129331)
 SketchLine_10 = Sketch_4.addLine(-91.83965287802501, -151.212050129331, -91.83965287802501, -84.473709256573)
 SketchLine_11 = Sketch_4.addLine(-91.83965287802501, -84.473709256573, -176.701443076057, -84.473709256573)
@@ -125,6 +125,6 @@ import ModelAPI
 
 assert(ModelAPI.ModelAPI_Session.get().validators().validate(Sketch_4.feature()))
 assert(ModelAPI.ModelAPI_Session.get().validators().validate(ExtrusionCut_2.feature()))
-assert(Sketch_3.feature().selection("External").namingName() == "_Extrusion_1_1/Modfied_4")
+assert(Sketch_3.feature().selection("External").namingName() == "ExtrusionCut_1_1/Modfied_4")
 
 assert(model.checkPythonDump())
diff --git a/src/ModelAPI/Test/Test2170.py b/src/ModelAPI/Test/Test2170.py
index f332784e2..daf3d3473 100644
--- a/src/ModelAPI/Test/Test2170.py
+++ b/src/ModelAPI/Test/Test2170.py
@@ -66,7 +66,7 @@ Sketch_1.result().setName("tutu")
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "tutu/Face-SketchLine_1f-SketchLine_3f-SketchArc_1_2f-SketchArc_2_2f")], model.selection(), 10, 0)
 Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "tutu/Edge-SketchLine_2")])
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OZ"), 100, 0)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "Edge_1_1/Generated_Edge_2&Edge_1_1/To_Edge_1"), model.selection("VERTEX", "Edge_1_1/Generated_Edge_1&Edge_1_1/To_Edge_1")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "Extrusion_2_1/Generated_Edge_2&Extrusion_2_1/To_Edge_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Edge_1&Extrusion_2_1/To_Edge_1")])
 model.end()
 
 # check that resulting group selection is valid
diff --git a/src/ModelAPI/Test/Test2228.py b/src/ModelAPI/Test/Test2228.py
index 0926071b4..666faafe6 100644
--- a/src/ModelAPI/Test/Test2228.py
+++ b/src/ModelAPI/Test/Test2228.py
@@ -55,10 +55,10 @@ SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_3.result())
 SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_4.result())
 model.do()
 Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_1")])
-Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "_Extrusion_2_1/From_Face_1"), 0, model.selection(), 0)
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_2_1/From_Face_1"), 0, model.selection(), 0)
 Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_4_1")])
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1"), model.selection("FACE", "Face_1_1")])
-Remove_SubShapes_1 = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPOUND", "Extrusion_1_1"))
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Boolean_1_1"), model.selection("SOLID", "Boolean_2_1"), model.selection("FACE", "Face_1_1")])
+Remove_SubShapes_1 = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPOUND", "Partition_1_1"))
 Remove_SubShapes_1.setSubShapesToKeep([model.selection("COMPSOLID", "Partition_1_1_1")])
 model.end()
 
diff --git a/src/ModelAPI/Test/Test2241.py b/src/ModelAPI/Test/Test2241.py
index dd5e5f869..4160c14a5 100644
--- a/src/ModelAPI/Test/Test2241.py
+++ b/src/ModelAPI/Test/Test2241.py
@@ -122,19 +122,15 @@ Face_5 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-Sketc
 MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "PartSet/OX"), "l", 4, model.selection("EDGE", "PartSet/OY"), "l", 2)
 Recover_1 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_1_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"))
-Translation_1.result().setName("Translation_1_1")
 MultiTranslation_2 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_1_1")], model.selection("EDGE", "PartSet/OX"), "l", 4, model.selection("EDGE", "PartSet/OY"), "l", 2)
 Recover_2 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 Translation_2 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_2_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_2&Face_4_1/Edge_3"))
-Translation_2.result().setName("Translation_2_1")
 MultiTranslation_3 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_2_1")], model.selection("EDGE", "PartSet/OX"), "l", 4)
 Recover_3 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
-Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Translation_2_1/Translated_Edge_1_4&Translation_2_1/Translated_Edge_1_3"))
-Translation_3.result().setName("Translation_3_1")
+Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "MultiTranslation_3_1/Translated_Edge_1_4&MultiTranslation_3_1/Translated_Edge_1_3"))
 MultiTranslation_4 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_3_1")], model.selection("EDGE", "PartSet/OX"), "l", 3)
 Recover_4 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_1&Face_4_1/Edge_9"))
-Translation_4.result().setName("Translation_4_1")
 MultiTranslation_5 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_4_1")], model.selection("EDGE", "PartSet/OX"), "l", 2)
 Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "MultiTranslation_4_1_2"), model.selection("FACE", "MultiTranslation_1_1_8"), model.selection("FACE", "MultiTranslation_1_1_4"), model.selection("FACE", "MultiTranslation_1_1_3"), model.selection("FACE", "MultiTranslation_1_1_6"), model.selection("FACE", "MultiTranslation_1_1_2"), model.selection("FACE", "MultiTranslation_1_1_7"), model.selection("FACE", "MultiTranslation_2_1_3"), model.selection("FACE", "MultiTranslation_3_1_4"), model.selection("FACE", "MultiTranslation_2_1_8"), model.selection("FACE", "MultiTranslation_2_1_4"), model.selection("FACE", "MultiTranslation_2_1_7"), model.selection("FACE", "MultiTranslation_4_1_3"), model.selection("FACE", "MultiTranslation_1_1_1"), model.selection("FACE", "MultiTranslation_5_1_2"), model.selection("FACE", "MultiTranslation_4_1_1"), model.selection("FACE", "MultiTranslation_5_1_1"), model.selection("FACE", "MultiTranslation_3_1_3"), model.selection("FACE", "MultiTranslation_3_1_2"), model.selection("FACE", "MultiTranslation_3_1_1"), model.selection("FACE", "MultiTranslation_2_1_6"), model.selection("FACE", "MultiTranslation_2_1_2"), model.selection("FACE", "MultiTranslation_2_1_5"), model.selection("FACE", "MultiTranslation_2_1_1"), model.selection("FACE", "MultiTranslation_1_1_5")])
 Group_1.setName("Group_3")
@@ -148,9 +144,8 @@ Group_3.setName("Group_2")
 Group_3.result().setName("acier")
 Group_3.result().setColor(170, 85, 0)
 Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "MultiTranslation_1_1_1"), model.selection("FACE", "MultiTranslation_1_1_2"), model.selection("FACE", "MultiTranslation_1_1_3"), model.selection("FACE", "MultiTranslation_1_1_4"), model.selection("FACE", "MultiTranslation_1_1_5"), model.selection("FACE", "MultiTranslation_1_1_6"), model.selection("FACE", "MultiTranslation_1_1_7"), model.selection("FACE", "MultiTranslation_2_1_4"), model.selection("FACE", "MultiTranslation_2_1_5"), model.selection("FACE", "MultiTranslation_2_1_6"), model.selection("FACE", "MultiTranslation_2_1_7"), model.selection("FACE", "MultiTranslation_2_1_8"), model.selection("FACE", "MultiTranslation_2_1_1"), model.selection("FACE", "MultiTranslation_2_1_2"), model.selection("FACE", "MultiTranslation_2_1_3"), model.selection("FACE", "MultiTranslation_3_1_4"), model.selection("FACE", "MultiTranslation_3_1_3"), model.selection("FACE", "MultiTranslation_3_1_2"), model.selection("FACE", "MultiTranslation_3_1_1"), model.selection("FACE", "MultiTranslation_4_1_1"), model.selection("FACE", "MultiTranslation_4_1_2"), model.selection("FACE", "MultiTranslation_4_1_3"), model.selection("FACE", "MultiTranslation_5_1_1"), model.selection("FACE", "MultiTranslation_5_1_2"), model.selection("FACE", "MultiTranslation_1_1_8")])
-Shell_1.result().setName("Shell_1_1")
 Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_4_1"), model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_12"), model.selection("SHELL", "Shell_1_1")])
-Remove_SubShapes_1 = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPOUND", "Face_3_1"))
+Remove_SubShapes_1 = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPOUND", "Partition_1_1"))
 Remove_SubShapes_1.setSubShapesToKeep([model.selection("FACE", "Partition_1_1_2"), model.selection("FACE", "Partition_1_1_3"), model.selection("FACE", "Partition_1_1_4"), model.selection("FACE", "Partition_1_1_5"), model.selection("FACE", "Partition_1_1_6"), model.selection("FACE", "Partition_1_1_7"), model.selection("FACE", "Partition_1_1_8"), model.selection("FACE", "Partition_1_1_9")])
 model.end()
 
diff --git a/src/ModelHighAPI/ModelHighAPI_Dumper.cpp b/src/ModelHighAPI/ModelHighAPI_Dumper.cpp
index a5073da9e..4ac4db53a 100644
--- a/src/ModelHighAPI/ModelHighAPI_Dumper.cpp
+++ b/src/ModelHighAPI/ModelHighAPI_Dumper.cpp
@@ -214,7 +214,8 @@ void ModelHighAPI_Dumper::saveResultNames(const FeaturePtr& theFeature)
   const std::list<ResultPtr>& aResults = theFeature->results();
   std::list<ResultPtr>::const_iterator aResIt = aResults.begin();
   for (int i = 0; aResIt != aResults.end(); ++aResIt, ++i) {
-    std::string aDefaultName = ModelAPI_Tools::getDefaultName(*aResIt, i);
+    std::pair<std::string, bool> aName = ModelAPI_Tools::getDefaultName(*aResIt, i);
+    std::string aDefaultName = aName.first;
     std::string aResName = (*aResIt)->data()->name();
 
     bool isUserDefined = !(isFeatureDefaultName && aDefaultName == aResName);
@@ -229,7 +230,8 @@ void ModelHighAPI_Dumper::saveResultNames(const FeaturePtr& theFeature)
       for (int j = 0; j < aNbSubs; ++j) {
         ResultPtr aSub = aCompSolid->subResult(j);
         std::string aSubName = aSub->data()->name();
-        aDefaultName = ModelAPI_Tools::getDefaultName(aSub, j);
+        aName = ModelAPI_Tools::getDefaultName(aSub, j);
+        aDefaultName = aName.first;
 
         bool isUserDefinedSubName = isUserDefined || aDefaultName != aSubName;
         myNames[aSub] = EntityName(aSubName,
diff --git a/test.API/SHAPER/Transformations/TestTranslation_1.py b/test.API/SHAPER/Transformations/TestTranslation_1.py
index 56fcd4ed2..5577a9654 100644
--- a/test.API/SHAPER/Transformations/TestTranslation_1.py
+++ b/test.API/SHAPER/Transformations/TestTranslation_1.py
@@ -181,16 +181,16 @@ Translation_6 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_
 Translation_7 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_7_1")], model.selection("EDGE", "Edge_1_1"), 15)
 Translation_8 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_8_1")], model.selection("EDGE", "Box_8_1/Right&Box_8_1/Top"), 15)
 Translation_9 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_9_1")], model.selection("EDGE", "PartSet/Axis_4"), 15)
-Translation_10 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_10_1")], model.selection("EDGE", "PartSet/OZ"), 15)
-Translation_11 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_11_1")], model.selection("EDGE", "PartSet/OZ"), 0)
-Translation_12 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_12_1")], model.selection("EDGE", "PartSet/OZ"), -15)
-Translation_13 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_13_1")], model.selection("EDGE", "InvalidName"), 15)
-Translation_14 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_14_1")], model.selection("EDGE", "PartSet/OZ"), "d")
-Translation_15 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_15_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), 50)
-Translation_16 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_16_1")], model.selection("EDGE", "Edge_1_1"), 50)
+Translation_10 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_1_1")], model.selection("EDGE", "PartSet/OZ"), 15)
+Translation_11 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_2_1")], model.selection("EDGE", "PartSet/OZ"), 0)
+Translation_12 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_3_1")], model.selection("EDGE", "PartSet/OZ"), -15)
+Translation_13 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_4_1")], model.selection("EDGE", "InvalidName"), 15)
+Translation_14 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_5_1")], model.selection("EDGE", "PartSet/OZ"), "d")
+Translation_15 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_6_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), 50)
+Translation_16 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_7_1")], model.selection("EDGE", "Edge_1_1"), 50)
 #Translation_17 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_8_1")], model.selection("EDGE", "MultiTranslation_8_1/Translated_Edge_8_8"), 50)
-Translation_17 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_17_1")], model.selection("EDGE", "Box_17_1/Translated_Face_3_4&Box_17_1/Translated_Face_3_1"), 50)
-Translation_18 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_18_1")], model.selection("EDGE", "PartSet/Axis_4"), 50)
+Translation_17 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_8_1")], model.selection("EDGE", "MultiTranslation_8_1/Translated_Face_3_4&MultiTranslation_8_1/Translated_Face_3_1"), 50)
+Translation_18 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "MultiTranslation_9_1")], model.selection("EDGE", "PartSet/Axis_4"), 50)
 Translation_19 = model.addTranslation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "OX"), 15)
 Translation_20 = model.addTranslation(partSet, [model.selection("COMPOUND", "Part_3/")], model.selection("EDGE", "OX"), 0)
 Translation_21 = model.addTranslation(partSet, [model.selection("COMPOUND", "Part_4/")], model.selection("EDGE", "OX"), -15)
diff --git a/test.API/SHAPER/Transformations/TestTranslation_2.py b/test.API/SHAPER/Transformations/TestTranslation_2.py
index bc030e28b..0f3e3e9e2 100644
--- a/test.API/SHAPER/Transformations/TestTranslation_2.py
+++ b/test.API/SHAPER/Transformations/TestTranslation_2.py
@@ -91,93 +91,93 @@ model.addParameter(Part_1_doc, "d", "15")
 
 # Translation 27
 Translation_27_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Intersection_1 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_2_1")], [model.selection("SOLID", "Box_1_1")])
-Translation_27 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_2_1")], model.selection("EDGE", "PartSet/OX"), 15)
+Intersection_1 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_2_1")], [model.selection("SOLID", "Translation_1_1")])
+Translation_27 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_1_1")], model.selection("EDGE", "PartSet/OX"), 15)
 
 # Translation 28
 Translation_28_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_3_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Intersection_2 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_4_1")], [model.selection("SOLID", "Box_3_1")])
-Translation_28 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_4_1")], model.selection("EDGE", "PartSet/OX"), 0)
+Intersection_2 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_4_1")], [model.selection("SOLID", "Translation_3_1")])
+Translation_28 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_2_1")], model.selection("EDGE", "PartSet/OX"), 0)
 
 # Translation 29
 Translation_29_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_5_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Intersection_3 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_6_1")], [model.selection("SOLID", "Box_5_1")])
-Translation_29 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_6_1")], model.selection("EDGE", "PartSet/OX"), -15)
+Intersection_3 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_6_1")], [model.selection("SOLID", "Translation_5_1")])
+Translation_29 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_3_1")], model.selection("EDGE", "PartSet/OX"), -15)
 
 # Translation 30
 Translation_30_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_7_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Intersection_4 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_8_1")], [model.selection("SOLID", "Box_7_1")])
-Translation_30 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_8_1")], model.selection("EDGE", "InvalidName"), -15)
+Intersection_4 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_8_1")], [model.selection("SOLID", "Translation_7_1")])
+Translation_30 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_4_1")], model.selection("EDGE", "InvalidName"), -15)
 
 # Translation 31
 Translation_31_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_9_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Intersection_5 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_10_1")], [model.selection("SOLID", "Box_9_1")])
-Translation_31 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_10_1")], model.selection("EDGE", "PartSet/OY"), "d")
+Intersection_5 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_10_1")], [model.selection("SOLID", "Translation_9_1")])
+Translation_31 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_5_1")], model.selection("EDGE", "PartSet/OY"), "d")
 
 # Translation 32
 Translation_32_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_11_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Intersection_6 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_12_1")], [model.selection("SOLID", "Box_11_1")])
-Translation_32 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_12_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), 15)
+Intersection_6 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_12_1")], [model.selection("SOLID", "Translation_11_1")])
+Translation_32 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_6_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), 15)
 
 # Translation 33
 Translation_33_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_13_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Intersection_7 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_14_1")], [model.selection("SOLID", "Box_13_1")])
-Translation_33 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_14_1")], model.selection("EDGE", "Edge_1_1"), 15)
+Intersection_7 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_14_1")], [model.selection("SOLID", "Translation_13_1")])
+Translation_33 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_7_1")], model.selection("EDGE", "Edge_1_1"), 15)
 
 # Translation 34
 Translation_34_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_15_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Intersection_8 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_16_1")], [model.selection("SOLID", "Box_15_1")])
-Translation_34 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_16_1")], model.selection("EDGE", "Intersection_8_1_6"), 15)
+Intersection_8 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_16_1")], [model.selection("SOLID", "Translation_15_1")])
+Translation_34 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_8_1")], model.selection("EDGE", "Intersection_8_1_6"), 15)
 
 # Translation 35
 Translation_35_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_17_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Intersection_9 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_18_1")], [model.selection("SOLID", "Box_17_1")])
-Translation_35 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Box_18_1")], model.selection("EDGE", "Axis_1"), 15)
+Intersection_9 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_18_1")], [model.selection("SOLID", "Translation_17_1")])
+Translation_35 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_9_1")], model.selection("EDGE", "Axis_1"), 15)
 
 #Translation 36
 Translation_36_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_19_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_20_1"), model.selection("SOLID", "Box_19_1")])
-Translation_36 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Box_20_1")], model.selection("EDGE", "PartSet/OX"), 15)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_20_1"), model.selection("SOLID", "Translation_19_1")])
+Translation_36 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_1_1")], model.selection("EDGE", "PartSet/OX"), 15)
 
 ## Translation 37
 Translation_37_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_21_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Partition_2 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_22_1"), model.selection("SOLID", "Box_21_1")])
-Translation_37 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Box_22_1")], model.selection("EDGE", "PartSet/OX"), 0)
+Partition_2 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_22_1"), model.selection("SOLID", "Translation_21_1")])
+Translation_37 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_2_1")], model.selection("EDGE", "PartSet/OX"), 0)
 
 ## Translation 38
 Translation_38_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_23_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Partition_3 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_24_1"), model.selection("SOLID", "Box_23_1")])
-Translation_38 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Box_24_1")], model.selection("EDGE", "PartSet/OX"), 0)
+Partition_3 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_24_1"), model.selection("SOLID", "Translation_23_1")])
+Translation_38 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_3_1")], model.selection("EDGE", "PartSet/OX"), 0)
 
 ## Translation 39
 Translation_39_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_25_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Partition_4 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_26_1"), model.selection("SOLID", "Box_25_1")])
-Translation_39 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Box_26_1")], model.selection("EDGE", "InvalidName"), 0)
+Partition_4 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_26_1"), model.selection("SOLID", "Translation_25_1")])
+Translation_39 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_4_1")], model.selection("EDGE", "InvalidName"), 0)
 
 ## Translation 40
 Translation_40_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_27_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Partition_5 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_28_1"), model.selection("SOLID", "Box_27_1")])
-Translation_40 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Box_28_1")], model.selection("EDGE", "PartSet/OX"), "d")
+Partition_5 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_28_1"), model.selection("SOLID", "Translation_27_1")])
+Translation_40 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_5_1")], model.selection("EDGE", "PartSet/OX"), "d")
 
 # Translation 41
 Translation_41_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_29_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Partition_6 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_30_1"), model.selection("SOLID", "Box_29_1")])
-Translation_41 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Box_30_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), 15)
+Partition_6 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_30_1"), model.selection("SOLID", "Translation_29_1")])
+Translation_41 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_6_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), 15)
 
 # Translation 42
 Translation_42_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_31_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Partition_7 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_32_1"), model.selection("SOLID", "Box_31_1")])
-Translation_42 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Box_32_1")], model.selection("EDGE", "Edge_1_1"), 15)
+Partition_7 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_32_1"), model.selection("SOLID", "Translation_31_1")])
+Translation_42 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_7_1")], model.selection("EDGE", "Edge_1_1"), 15)
 
 # Translation 43
 Translation_43_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_33_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Partition_8 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_34_1"), model.selection("SOLID", "Box_33_1")])
-Translation_43 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Box_34_1")], model.selection("EDGE", "Partition_8_1_1/Modified_Face_2_5&Partition_8_1_1/Modified_Face_2_2"), 15)
+Partition_8 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_34_1"), model.selection("SOLID", "Translation_33_1")])
+Translation_43 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_8_1")], model.selection("EDGE", "Partition_8_1_1/Modified_Face_2_5&Partition_8_1_1/Modified_Face_2_2"), 15)
 
 # Translation 44
 Translation_44_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_35_1")], model.selection("EDGE", "PartSet/OX"), 5)
-Partition_9 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_36_1"), model.selection("SOLID", "Box_35_1")])
-Translation_44 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Box_36_1")], model.selection("EDGE", "Axis_1"), 15)
+Partition_9 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_36_1"), model.selection("SOLID", "Translation_35_1")])
+Translation_44 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_9_1")], model.selection("EDGE", "Axis_1"), 15)
 model.do()
 model.end()
 
diff --git a/test.models/CSWA.py b/test.models/CSWA.py
index 7029f1396..ff88affcd 100644
--- a/test.models/CSWA.py
+++ b/test.models/CSWA.py
@@ -102,7 +102,6 @@ SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], "50/2")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"))
 SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"))
 SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"))
@@ -128,7 +127,6 @@ SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchArc_3.results()[1]
 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
 model.do()
 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_3_2f-SketchLine_12f-SketchArc_5_2r")], model.selection(), 5, 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face_1"))
 SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionFuse_1_1/Modfied_4&ExtrusionFuse_1_1/Modfied_5&ExtrusionFuse_1_1/To_Face_1"))
 SketchCircle_2 = Sketch_4.addCircle(-15, 35.00000000000001, 5)
@@ -137,7 +135,6 @@ SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
 SketchConstraintRadius_4 = Sketch_4.setRadius(SketchCircle_2.results()[1], "10/2")
 model.do()
 ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_2_2f")], model.selection(), 8, 0, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-ExtrusionFuse_2.result().setName("ExtrusionFuse_2_1")
 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
 SketchArc_6 = Sketch_5.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&ExtrusionFuse_1_1/Modfied_3"))
 SketchArc_7 = Sketch_5.addArc(-45, 35, -45, 5, -25.41666666666737, 12.27351642784166, False)
@@ -167,7 +164,6 @@ SketchConstraintCoincidence_33 = Sketch_5.setCoincident(SketchArc_9.startPoint()
 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_34")
 model.do()
 ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchLine_13r-SketchArc_9_2r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")])
-ExtrusionFuse_3.result().setName("ExtrusionFuse_3_1")
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modfied_3"))
 SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7"))
 SketchArc_10 = Sketch_6.addArc(55, 35, 55, 15, 35, 35, True)
@@ -198,7 +194,6 @@ SketchConstraintCoincidence_41 = Sketch_6.setCoincident(SketchLine_14.endPoint()
 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42")
 model.do()
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_10_2f-SketchLine_16r-SketchLine_18f-SketchLine_19r")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_4"))
 SketchCircle_4 = Sketch_7.addCircle(45, 35, 5)
 SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/Modfied_4"))
@@ -214,7 +209,6 @@ SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_44")
 SketchConstraintHorizontal_4 = Sketch_7.setHorizontal(SketchLine_21.result())
 model.do()
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
 SketchLine_22 = Sketch_8.addLine(55, 25, 5.000000000000002, 25)
 SketchLine_23 = Sketch_8.addLine(5.000000000000002, 25, 5.000000000000002, 13)
@@ -243,7 +237,6 @@ SketchConstraintCoincidence_49 = Sketch_8.setCoincident(SketchLine_22.startPoint
 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50")
 model.do()
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modfied_2"))
 SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320836, -63)
 SketchLine_29 = Sketch_9.addLine(model.selection("EDGE", "ExtrusionFuse_1_1/Modfied_2&ExtrusionCut_4_1/Modfied_6"))
@@ -266,7 +259,6 @@ SketchConstraintCoincidence_55 = Sketch_9.setCoincident(SketchLine_28.startPoint
 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_56")
 model.do()
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_28f-SketchLine_31f-SketchLine_32f")], model.selection(), model.selection(), 0, model.selection("FACE", "ExtrusionCut_4_1/Modfied_3"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
 Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1"))
 SketchCircle_5 = Sketch_10.addCircle(-6.000000000000002, 4.999999999999997, 5)
 SketchLine_33 = Sketch_10.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_5_1/Modfied_1"))
@@ -276,7 +268,6 @@ SketchConstraintDistance_12 = Sketch_10.setDistance(SketchCircle_5.result(), Ske
 SketchConstraintRadius_7 = Sketch_10.setRadius(SketchCircle_5.results()[1], "10/2")
 model.do()
 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchCircle_5_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
-ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
 model.do()
 
 # Test reexecution after parameter change
diff --git a/test.models/angle30.py b/test.models/angle30.py
index 8bed73f7c..f5eebf081 100644
--- a/test.models/angle30.py
+++ b/test.models/angle30.py
@@ -141,7 +141,6 @@ model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 75, 45)
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 Boolean_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Boolean_1.result().setName("Boolean_1_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 SketchLine_20 = Sketch_4.addLine(-4, 38.00000000000001, -4, 21.26617031813674)
 SketchLine_20.setName("SketchLine_36")
@@ -354,11 +353,9 @@ model.do()
 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 50, 30)
 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 Boolean_2 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "Extrusion_4_1")])
-Boolean_2.result().setName("Boolean_2_1")
 Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 75, 40)
 Boolean_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")])
-Boolean_3.result().setName("Boolean_3_1")
 Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 SketchLine_38 = Sketch_5.addLine(44, 3.464101615137769, 17.52573586555855, 49.31887218898888)
 SketchLine_38.setName("SketchLine_41")
@@ -492,11 +489,8 @@ SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_94")
 model.do()
 Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_55r-SketchLine_44r-SketchLine_52r-SketchLine_53r-SketchLine_54r-SketchLine_47r-SketchLine_48r-SketchLine_49r-SketchArc_12_2r-SketchArc_13_2r")], model.selection(), 0, 40)
 Boolean_4 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Boolean_2_1")])
-Boolean_4.result().setName("Boolean_4_1")
 Boolean_5 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Extrusion_7_1")])
-Boolean_5.result().setName("Boolean_5_1")
 Boolean_6 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_5_1")], [model.selection("SOLID", "Boolean_3_1")])
-Boolean_6.result().setName("Boolean_6_1")
 Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55)
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_1"))
 SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60)
@@ -619,7 +613,6 @@ SketchConstraintDistance_33 = Sketch_7.setDistance(SketchCircle_7.center(), Sket
 SketchConstraintDistance_34 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_66.result(), 11)
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_3"))
 SketchLine_67 = Sketch_8.addLine(55, -34.06366588218793, 55, 66.69872981077805)
 SketchLine_67.setName("SketchLine_79")
@@ -768,9 +761,7 @@ SketchConstraintDistance_44 = Sketch_8.setDistance(SketchArc_18.startPoint(), Sk
 SketchConstraintDistance_44.setName("SketchConstraintDistance_45")
 model.do()
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Boolean_7 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_6_1")], [model.selection("SOLID", "ExtrusionCut_2_1")])
-Boolean_7.result().setName("Boolean_7_1")
 model.do()
 
 # Test reexecution after parameter change
diff --git a/test.models/bearing_puller.py b/test.models/bearing_puller.py
index fc234273f..48c07ac79 100644
--- a/test.models/bearing_puller.py
+++ b/test.models/bearing_puller.py
@@ -29,7 +29,6 @@ model.addParameter(partSet, "Rod", "12")
 model.addParameter(partSet, "Thickness", "25")
 Part_1 = model.addPart(partSet)
 Part_1.setName("Body")
-Part_1.result().setName("Part_1")
 Part_1_doc = Part_1.document()
 model.addParameter(Part_1_doc, "Radius", "50", "Radius of the body")
 model.addParameter(Part_1_doc, "Width", "25", "Width of body arms")
@@ -230,9 +229,7 @@ SketchConstraintDistance_9.setName("SketchConstraintDistance_8")
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_10r-SketchLine_11r-SketchArc_3_2f-SketchArc_4_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12r-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 10)
 Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5")])
-Boolean_1.result().setName("Boolean_1_1")
 Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_6")])
-Boolean_2.result().setName("Boolean_2_1")
 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Boolean_2_1/Modified_7"), model.selection("FACE", "Boolean_2_1/Modified_9"))
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchCircle_3 = Sketch_3.addCircle(25, -10, 4)
@@ -257,23 +254,15 @@ SketchConstraintDistance_13.setName("SketchConstraintDistance_12")
 model.do()
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_3/Wire-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Boolean_1_1/Modified_6"), 5, model.selection("FACE", "Boolean_1_1/Modified_8"), 5)
 Boolean_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_2_1")], [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
-Boolean_3.result().setName("Boolean_3_1")
 Recover_1 = model.addRecover(Part_1_doc, Boolean_3, [Extrusion_2.results()[1], Extrusion_2.result()])
 Rotation_1 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_1_1"), model.selection("SOLID", "Recover_1_2")], model.selection("EDGE", "PartSet/OZ"), 120)
-Rotation_1.result().setName("Rotation_1_1")
-Rotation_1.results()[1].setName("Rotation_1_2")
 Boolean_4 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_3_1")], [model.selection("SOLID", "Rotation_1_1"), model.selection("SOLID", "Rotation_1_2")])
-Boolean_4.result().setName("Boolean_4_1")
 Recover_2 = model.addRecover(Part_1_doc, Boolean_4, [Rotation_1.results()[1], Rotation_1.result()])
 Rotation_2 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_2_1"), model.selection("SOLID", "Recover_2_2")], model.selection("EDGE", "PartSet/OZ"), 120)
-Rotation_2.result().setName("Rotation_2_1")
-Rotation_2.results()[1].setName("Rotation_2_2")
 Boolean_5 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Rotation_2_2"), model.selection("SOLID", "Rotation_2_1")])
-Boolean_5.result().setName("Boolean_5_1")
 model.do()
 Part_2 = model.addPart(partSet)
 Part_2.setName("Arm 1")
-Part_2.result().setName("Part_2")
 Part_2_doc = Part_2.document()
 model.addParameter(Part_2_doc, "a", "7.5")
 model.addParameter(Part_2_doc, "b", "12.5")
@@ -508,32 +497,24 @@ model.do()
 Face_1 = model.addFace(Part_2_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchArc_4_2f-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f-SketchArc_9_2f-SketchArc_10_2f")])
 Axis_4 = model.addAxis(Part_2_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3-SketchLine_20s"))
 Rotation_3 = model.addRotation(Part_2_doc, [model.selection("FACE", "Face_1_1")], model.selection("EDGE", "Axis_1"), -43.8752)
-Rotation_3.result().setName("Rotation_1_1")
 Pipe_1 = model.addPipe(Part_2_doc, [model.selection("FACE", "Rotation_1_1")], model.selection("EDGE", "Sketch_2/Edge-SketchArc_3_2"))
-Pipe_1.result().setName("Pipe_1_1")
 Extrusion_3 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchLine_15r-SketchLine_16r-SketchLine_17r")], model.selection(), "Gap/2", "Gap/2")
 Boolean_6 = model.addFuse(Part_2_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
-Boolean_6.result().setName("Boolean_1_1")
 Extrusion_4 = model.addExtrusion(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), "Gap", "Gap")
 Boolean_7 = model.addCut(Part_2_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Boolean_7.result().setName("Boolean_2_1")
 Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Boolean_2_1")], model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3_2s"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e"))
-Translation_1.result().setName("Translation_1_1")
 model.do()
 Part_3 = model.duplicatePart(Part_2)
 Part_3.setName("Arm 2")
-Part_3.result().setName("Part_3")
 model.do()
 Part_4 = model.duplicatePart(Part_3)
 Part_4.setName("Arm 3")
-Part_4.result().setName("Part_4")
 model.do()
 Translation_4 = model.addTranslation(partSet, [model.selection("COMPOUND", "Part_2/"), model.selection("COMPOUND", "Part_3/"), model.selection("COMPOUND", "Part_4/")], model.selection("EDGE", "OX"), -40)
 Rotation_6 = model.addRotation(partSet, [model.selection("COMPOUND", "Translation_1_2/")], model.selection("EDGE", "OZ"), 120)
 Rotation_7 = model.addRotation(partSet, [model.selection("COMPOUND", "Translation_1_3/")], model.selection("EDGE", "OZ"), 240)
 Part_5 = model.addPart(partSet)
 Part_5.setName("Rod part")
-Part_5.result().setName("Part_5")
 Part_5_doc = Part_5.document()
 Parameter_H = model.addParameter(partSet, "H", "110")
 Sketch_10 = model.addSketch(Part_5_doc, model.defaultPlane("YOZ"))
@@ -617,9 +598,7 @@ SketchConstraintDistance_37 = Sketch_12.setDistance(SketchLine_108.startPoint(),
 model.do()
 Revolution_3 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_14f-SketchLine_15f-SketchLine_16f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
 Boolean_12 = model.addCut(Part_5_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")])
-Boolean_12.result().setName("Boolean_1_1")
 Boolean_13 = model.addFuse(Part_5_doc, [model.selection("SOLID", "Boolean_1_1"), model.selection("SOLID", "Revolution_1_1")], [])
-Boolean_13.result().setName("Boolean_2_1")
 
 # Test reexecution after parameter change
 Parameter_H.setValue(120)
diff --git a/test.models/bobine_film_reel.py b/test.models/bobine_film_reel.py
index 5db7d85c2..846b051b3 100644
--- a/test.models/bobine_film_reel.py
+++ b/test.models/bobine_film_reel.py
@@ -79,7 +79,6 @@ SketchConstraintCoincidence_8 = Sketch_5.setCoincident(SketchAPI_Line(SketchLine
 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_16")
 Extrusion_5.setNestedSketch(Sketch_5)
 Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1"), model.selection("SOLID", "Extrusion_5_1"), model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_3_1")], [])
-Boolean_1.result().setName("Boolean_1_1")
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection("FACE", "Extrusion_5_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "Boolean_1_1")])
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/From_Face_1"))
 SketchCircle_6 = Sketch_6.addCircle(0, 0, 4.2)
@@ -88,7 +87,6 @@ SketchPoint_2 = Sketch_6.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 SketchConstraintCoincidence_9 = Sketch_6.setCoincident(SketchPoint_2.coordinates(), SketchCircle_6.center())
 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_17")
 ExtrusionCut_1.setNestedSketch(Sketch_6)
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
 SketchCircle_7 = Sketch_7.addCircle(0, -85, 66)
 SketchLine_6 = Sketch_7.addLine(model.selection("EDGE", "PartSet/OY"))
@@ -99,7 +97,6 @@ SketchMultiRotation_1 = Sketch_7.addRotation([SketchCircle_7.results()[1]], Sket
 [SketchCircle_8, SketchCircle_9] = SketchMultiRotation_1.rotated()
 model.do()
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_22"))
 SketchLine_7 = Sketch_8.addLine(-2.320957096353877e-016, 11.00000001704673, -7, 11.00000001704673)
 SketchConstraintHorizontal_1 = Sketch_8.setHorizontal(SketchLine_7.result())
diff --git a/test.models/bracket32.py b/test.models/bracket32.py
index 3690c9d3b..42dcf26c4 100644
--- a/test.models/bracket32.py
+++ b/test.models/bracket32.py
@@ -411,11 +411,8 @@ SketchConstraintRadius_10.setName("SketchConstraintRadius_4")
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "TL/2-3", "TL/2-3")
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 100, 100, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), "TL/2", "TL/2", [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 60, 60, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
 SketchCircle_5 = Sketch_5.addCircle(30, -41, 7.5)
 SketchLine_37 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OX"))
@@ -542,7 +539,6 @@ SketchConstraintRadius_13 = Sketch_7.setRadius(SketchArc_7.results()[1], "BHPFR"
 SketchConstraintRadius_13.setName("SketchConstraintRadius_8")
 model.do()
 RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "Sketch_7/Edge-SketchLine_41"), 360, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-RevolutionFuse_1.result().setName("RevolutionFuse_1_1")
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchLine_49 = Sketch_8.addLine(32, 6, 32.50001476412091, 6.000000000000001)
 SketchLine_49.setName("SketchLine_55")
@@ -639,7 +635,6 @@ SketchConstraintRadius_14 = Sketch_8.setRadius(SketchArc_8.results()[1], 1.5)
 SketchConstraintRadius_14.setName("SketchConstraintRadius_9")
 model.do()
 RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_55r-SketchLine_49f-SketchLine_50f-SketchLine_56r-SketchLine_52f-SketchLine_53f-SketchArc_7_2r")], model.selection("EDGE", "Sketch_8/Edge-SketchLine_50"), 360, 0, [model.selection("SOLID", "RevolutionFuse_1_1")])
-RevolutionFuse_2.result().setName("RevolutionFuse_2_1")
 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, True)
 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
 SketchLine_57 = Sketch_9.addLine(-32.50001494742042, 5.999999999999998, -32, 6)
@@ -832,9 +827,7 @@ SketchConstraintRadius_16 = Sketch_10.setRadius(SketchArc_10.results()[1], 1.5)
 SketchConstraintRadius_16.setName("SketchConstraintRadius_11")
 model.do()
 RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_58"), 360, 0, [model.selection("SOLID", "RevolutionFuse_2_1")])
-RevolutionFuse_3.result().setName("RevolutionFuse_3_1")
 RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_10")], model.selection("EDGE", "Sketch_10/Edge-SketchLine_66"), 360, 0, [model.selection("SOLID", "RevolutionFuse_3_1")])
-RevolutionFuse_4.result().setName("RevolutionFuse_4_1")
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchCircle_10_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_12_2f")], model.selection("EDGE", "PartSet/OZ"), "BPS+5", 5, [model.selection("SOLID", "RevolutionFuse_4_1")])
 
 # Test reexecution after parameter change
diff --git a/test.models/bushing.py b/test.models/bushing.py
index f095cbb63..c3f15e14d 100644
--- a/test.models/bushing.py
+++ b/test.models/bushing.py
@@ -584,9 +584,7 @@ SketchConstraintDistance_13 = Sketch_3.setDistance(SketchCircle_4.center(), Sket
 model.do()
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_8f-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f")], model.selection("EDGE", "PartSet/OX"), 360, 0)
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_1_2r-SketchLine_382f-SketchLine_383f-SketchLine_20f-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f-SketchLine_30f-SketchLine_31f-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f-SketchLine_36f-SketchLine_37f-SketchLine_38f-SketchLine_39f-SketchLine_40f-SketchLine_41f-SketchLine_42f-SketchLine_43f-SketchLine_44f-SketchLine_45f-SketchLine_46f-SketchLine_47f-SketchLine_48f-SketchLine_49f-SketchLine_50f-SketchLine_51f-SketchLine_52f-SketchLine_53f-SketchLine_54f-SketchLine_55f-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchLine_59f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchLine_65f-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_69f-SketchLine_70f-SketchLine_71f-SketchLine_72f-SketchLine_73f-SketchLine_74f-SketchLine_75f-SketchLine_76f-SketchLine_77f-SketchLine_78f-SketchLine_79f-SketchLine_80f-SketchLine_81f-SketchLine_82f-SketchLine_83f-SketchLine_84f-SketchLine_85f-SketchLine_86f-SketchLine_87f-SketchLine_88f-SketchLine_89f-SketchLine_90f-SketchLine_91f-SketchLine_92f-SketchLine_93f-SketchLine_94f-SketchLine_95f-SketchLine_96f-SketchLine_97f-SketchLine_98f-SketchLine_99f-SketchLine_100f-SketchLine_101f-SketchLine_102f-SketchLine_103f-SketchLine_104f-SketchLine_105f-SketchLine_106f-SketchLine_107f-SketchLine_108f-SketchLine_109f-SketchLine_110f-SketchLine_111f-SketchLine_112f-SketchLine_113f-SketchLine_114f-SketchLine_115f-SketchLine_116f-SketchLine_117f-SketchLine_118f-SketchLine_119f-SketchLine_120f-SketchLine_121f-SketchLine_122f-SketchLine_123f-SketchLine_124f-SketchLine_125f-SketchLine_126f-SketchLine_127f-SketchLine_128f-SketchLine_129f-SketchLine_130f-SketchLine_131f-SketchLine_132f-SketchLine_133f-SketchLine_134f-SketchLine_135f-SketchLine_136f-SketchLine_137f-SketchLine_138f-SketchLine_139f-SketchLine_140f-SketchLine_141f-SketchLine_142f-SketchLine_143f-SketchLine_144f-SketchLine_145f-SketchLine_146f-SketchLine_147f-SketchLine_148f-SketchLine_149f-SketchLine_150f-SketchLine_151f-SketchLine_152f-SketchLine_153f-SketchLine_154f-SketchLine_155f-SketchLine_156f-SketchLine_157f-SketchLine_158f-SketchLine_159f-SketchLine_160f-SketchLine_161f-SketchLine_162f-SketchLine_163f-SketchLine_164f-SketchLine_165f-SketchLine_166f-SketchLine_167f-SketchLine_168f-SketchLine_169f-SketchLine_170f-SketchLine_171f-SketchLine_172f-SketchLine_173f-SketchLine_174f-SketchLine_175f-SketchLine_176f-SketchLine_177f-SketchLine_178f-SketchLine_179f-SketchLine_180f-SketchLine_181f-SketchLine_182f-SketchLine_183f-SketchLine_184f-SketchLine_185f-SketchLine_186f-SketchLine_187f-SketchLine_188f-SketchLine_189f-SketchLine_190f-SketchLine_191f-SketchLine_192f-SketchLine_193f-SketchLine_194f-SketchLine_195f-SketchLine_196f-SketchLine_197f-SketchLine_198f-SketchLine_199f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2r-SketchArc_5_2r-SketchArc_6_2r-SketchArc_7_2r-SketchArc_8_2r-SketchArc_9_2r-SketchArc_10_2r-SketchArc_11_2r-SketchArc_12_2r-SketchArc_13_2r-SketchArc_14_2r-SketchArc_15_2r-SketchArc_16_2r-SketchArc_17_2r-SketchArc_18_2r-SketchArc_19_2r-SketchArc_20_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_23_2r-SketchArc_24_2r-SketchArc_25_2r-SketchArc_26_2r-SketchArc_27_2r-SketchArc_28_2r-SketchArc_29_2r-SketchArc_30_2r-SketchArc_31_2r-SketchArc_32_2r-SketchArc_33_2r-SketchArc_34_2r-SketchArc_35_2r-SketchArc_36_2r-SketchArc_37_2r-SketchArc_38_2r-SketchArc_39_2r-SketchArc_40_2r-SketchArc_41_2r-SketchArc_42_2r-SketchArc_43_2r-SketchArc_44_2r-SketchArc_45_2r-SketchArc_46_2r-SketchArc_47_2r-SketchArc_48_2r-SketchArc_49_2r-SketchArc_50_2r-SketchArc_51_2r-SketchArc_52_2r-SketchArc_53_2r-SketchArc_54_2r-SketchArc_55_2r-SketchArc_56_2r-SketchArc_57_2r-SketchArc_58_2r-SketchArc_59_2r-SketchArc_60_2r-SketchArc_61_2r-SketchArc_62_2r-SketchArc_63_2r-SketchArc_64_2r-SketchArc_65_2r-SketchArc_66_2r-SketchArc_67_2r-SketchArc_68_2r-SketchArc_69_2r-SketchArc_70_2r-SketchArc_71_2r-SketchArc_72_2r-SketchArc_73_2r-SketchArc_74_2r-SketchArc_75_2r-SketchArc_76_2r-SketchArc_77_2r-SketchArc_78_2r-SketchArc_79_2r-SketchArc_80_2r-SketchArc_81_2r-SketchArc_82_2r-SketchArc_83_2r-SketchArc_84_2r-SketchArc_85_2r-SketchArc_86_2r-SketchArc_87_2r-SketchArc_88_2r-SketchArc_89_2r-SketchArc_90_2r-SketchArc_91_2r-SketchArc_92_2r-SketchArc_93_2r-SketchArc_94_2r-SketchArc_95_2r-SketchArc_96_2r-SketchArc_97_2r-SketchArc_98_2r-SketchArc_99_2r-SketchArc_100_2r-SketchArc_101_2r-SketchArc_102_2r-SketchArc_103_2r-SketchArc_104_2r-SketchArc_105_2r-SketchArc_106_2r-SketchArc_107_2r-SketchArc_108_2r-SketchArc_109_2r-SketchArc_110_2r-SketchArc_111_2r-SketchArc_112_2r-SketchArc_113_2r-SketchArc_114_2r-SketchArc_115_2r-SketchArc_116_2r-SketchArc_117_2r-SketchArc_118_2r-SketchArc_119_2r-SketchArc_120_2r-SketchArc_121_2r-SketchArc_122_2r-SketchArc_123_2r-SketchArc_124_2r-SketchArc_125_2r-SketchArc_126_2r-SketchArc_127_2r-SketchArc_128_2r-SketchArc_129_2r-SketchArc_130_2r-SketchArc_131_2r-SketchArc_132_2r-SketchArc_133_2r-SketchArc_134_2r-SketchArc_135_2r-SketchArc_136_2r-SketchArc_137_2r-SketchArc_138_2r-SketchArc_139_2r-SketchArc_140_2r-SketchArc_141_2r-SketchArc_142_2r-SketchArc_143_2r-SketchArc_144_2r-SketchArc_145_2r-SketchArc_146_2r-SketchArc_147_2r-SketchArc_148_2r-SketchArc_149_2r-SketchArc_150_2r-SketchArc_151_2r-SketchArc_152_2r-SketchArc_153_2r-SketchArc_154_2r-SketchArc_155_2r-SketchArc_156_2r-SketchArc_157_2r-SketchArc_158_2r-SketchArc_159_2r-SketchArc_160_2r-SketchArc_161_2r-SketchArc_162_2r-SketchArc_163_2r-SketchArc_164_2r-SketchArc_165_2r-SketchArc_166_2r-SketchArc_167_2r-SketchArc_168_2r-SketchArc_169_2r-SketchArc_170_2r-SketchArc_171_2r-SketchArc_172_2r-SketchArc_173_2r-SketchArc_174_2r-SketchArc_175_2r-SketchArc_176_2r-SketchArc_177_2r-SketchArc_178_2r-SketchArc_179_2r-SketchArc_180_2r-SketchLine_21f-SketchLine_200f-SketchLine_201f-SketchLine_202f-SketchLine_203f-SketchLine_204f-SketchLine_205f-SketchLine_206f-SketchLine_207f-SketchLine_208f-SketchLine_209f-SketchLine_210f-SketchLine_211f-SketchLine_212f-SketchLine_213f-SketchLine_214f-SketchLine_215f-SketchLine_216f-SketchLine_217f-SketchLine_218f-SketchLine_219f-SketchLine_220f-SketchLine_221f-SketchLine_222f-SketchLine_223f-SketchLine_224f-SketchLine_225f-SketchLine_226f-SketchLine_227f-SketchLine_228f-SketchLine_229f-SketchLine_230f-SketchLine_231f-SketchLine_232f-SketchLine_233f-SketchLine_234f-SketchLine_235f-SketchLine_236f-SketchLine_237f-SketchLine_238f-SketchLine_239f-SketchLine_240f-SketchLine_241f-SketchLine_242f-SketchLine_243f-SketchLine_244f-SketchLine_245f-SketchLine_246f-SketchLine_247f-SketchLine_248f-SketchLine_249f-SketchLine_250f-SketchLine_251f-SketchLine_252f-SketchLine_253f-SketchLine_254f-SketchLine_255f-SketchLine_256f-SketchLine_257f-SketchLine_258f-SketchLine_259f-SketchLine_260f-SketchLine_261f-SketchLine_262f-SketchLine_263f-SketchLine_264f-SketchLine_265f-SketchLine_266f-SketchLine_267f-SketchLine_268f-SketchLine_269f-SketchLine_270f-SketchLine_271f-SketchLine_272f-SketchLine_273f-SketchLine_274f-SketchLine_275f-SketchLine_276f-SketchLine_277f-SketchLine_278f-SketchLine_279f-SketchLine_280f-SketchLine_281f-SketchLine_282f-SketchLine_283f-SketchLine_284f-SketchLine_285f-SketchLine_286f-SketchLine_287f-SketchLine_288f-SketchLine_289f-SketchLine_290f-SketchLine_291f-SketchLine_292f-SketchLine_293f-SketchLine_294f-SketchLine_295f-SketchLine_296f-SketchLine_297f-SketchLine_298f-SketchLine_299f-SketchLine_300f-SketchLine_301f-SketchLine_302f-SketchLine_303f-SketchLine_304f-SketchLine_305f-SketchLine_306f-SketchLine_307f-SketchLine_308f-SketchLine_309f-SketchLine_310f-SketchLine_311f-SketchLine_312f-SketchLine_313f-SketchLine_314f-SketchLine_315f-SketchLine_316f-SketchLine_317f-SketchLine_318f-SketchLine_319f-SketchLine_320f-SketchLine_321f-SketchLine_322f-SketchLine_323f-SketchLine_324f-SketchLine_325f-SketchLine_326f-SketchLine_327f-SketchLine_328f-SketchLine_329f-SketchLine_330f-SketchLine_331f-SketchLine_332f-SketchLine_333f-SketchLine_334f-SketchLine_335f-SketchLine_336f-SketchLine_337f-SketchLine_338f-SketchLine_339f-SketchLine_340f-SketchLine_341f-SketchLine_342f-SketchLine_343f-SketchLine_344f-SketchLine_345f-SketchLine_346f-SketchLine_347f-SketchLine_348f-SketchLine_349f-SketchLine_350f-SketchLine_351f-SketchLine_352f-SketchLine_353f-SketchLine_354f-SketchLine_355f-SketchLine_356f-SketchLine_357f-SketchLine_358f-SketchLine_359f-SketchLine_360f-SketchLine_361f-SketchLine_362f-SketchLine_363f-SketchLine_364f-SketchLine_365f-SketchLine_366f-SketchLine_367f-SketchLine_368f-SketchLine_369f-SketchLine_370f-SketchLine_371f-SketchLine_372f-SketchLine_373f-SketchLine_374f-SketchLine_375f-SketchLine_376f-SketchLine_377f-SketchCircle_3_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_4_2f")], model.selection(), 30, 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 
 # Test reexecution after parameter change
 Parameter_H.setValue(14)
diff --git a/test.models/case24.py b/test.models/case24.py
index 569774775..41321df99 100644
--- a/test.models/case24.py
+++ b/test.models/case24.py
@@ -82,7 +82,6 @@ SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.endPoint(), Sketc
 model.do()
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_7r-SketchLine_1r-SketchLine_2r-SketchLine_8r-SketchArc_1_2f")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), 0, 180)
 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_7r-SketchLine_1r-SketchLine_2r-SketchLine_8r-SketchArc_1_2f")], model.selection(), 0, 25, [model.selection("SOLID", "Revolution_1_1")])
-ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1")
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchLine_9 = Sketch_2.addLine(0, 20, -17.00000285538278, 20)
 SketchLine_9.setName("SketchLine_13")
@@ -128,7 +127,6 @@ SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_10.startPoint(), Sk
 SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_11.endPoint(), SketchLine_10.result(), 20)
 model.do()
 ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13f-SketchLine_9f-SketchLine_10f-SketchLine_14f-SketchArc_2_2f")], model.selection(), 0, 25, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-ExtrusionFuse_2.result().setName("ExtrusionFuse_2_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_8"))
 SketchLine_15 = Sketch_3.addLine(0, -20, -17.00000002635728, -20)
 SketchLine_15.setName("SketchLine_19")
@@ -177,7 +175,6 @@ SketchConstraintParallel_1 = Sketch_3.setParallel(SketchLine_17.result(), Sketch
 SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_21.startPoint(), SketchLine_18.result(), 3)
 model.do()
 RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "Sketch_3/Edge-SketchLine_21"), 71, 0, [model.selection("SOLID", "ExtrusionFuse_2_1")])
-RevolutionFuse_1.result().setName("RevolutionFuse_1_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_7"))
 SketchLine_22 = Sketch_4.addLine(-3, -20, 17.00000452949485, -20)
 SketchLine_22.setName("SketchLine_26")
@@ -227,7 +224,6 @@ SketchConstraintParallel_2 = Sketch_4.setParallel(SketchLine_25.result(), Sketch
 SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 3)
 model.do()
 RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_26f-SketchLine_22f-SketchLine_23f-SketchLine_27f-SketchArc_4_2f")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_29"), 0, 71, [model.selection("SOLID", "RevolutionFuse_1_1")])
-RevolutionFuse_2.result().setName("RevolutionFuse_2_1")
 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
 SketchLine_30 = Sketch_5.addLine(0, 0, 0, 82)
 SketchLine_31 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OZ"))
@@ -309,7 +305,6 @@ SketchConstraintDistance_15 = Sketch_5.setDistance(SketchLine_37.startPoint(), S
 SketchConstraintDistance_15.setName("SketchConstraintDistance_16")
 model.do()
 RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_30r-SketchLine_39r-SketchLine_32r-SketchLine_40r-SketchLine_38r-SketchArc_6_2f-SketchArc_7_2r")], model.selection("EDGE", "PartSet/OZ"), 45, 315, [model.selection("SOLID", "RevolutionFuse_2_1")])
-RevolutionFuse_3.result().setName("RevolutionFuse_3_1")
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
 SketchLine_38 = Sketch_6.addLine(19.99999999999999, 60, -20, 60)
 SketchLine_38.setName("SketchLine_48")
@@ -416,7 +411,6 @@ SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchLine_41.startPoint
 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_156")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), 100, 0, [model.selection("SOLID", "RevolutionFuse_3_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
 SketchLine_50 = Sketch_7.addLine(65, 23.09999999999939, 65, 23.00000523211526)
 SketchLine_50.setName("SketchLine_61")
@@ -500,7 +494,6 @@ SketchConstraintDistance_21 = Sketch_7.setDistance(SketchLine_50.startPoint(), S
 SketchConstraintDistance_21.setName("SketchConstraintDistance_23")
 model.do()
 RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "PartSet/OZ"), 14.4, 14.4, [model.selection("SOLID", "ExtrusionCut_1_1")])
-RevolutionFuse_4.result().setName("RevolutionFuse_4_1")
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
 SketchCircle_1 = Sketch_8.addCircle(0, 45, 12.5)
 SketchLine_60 = Sketch_8.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_30"))
@@ -517,7 +510,6 @@ SketchConstraintRadius_8 = Sketch_8.setRadius(SketchCircle_1.results()[1], 12.5)
 SketchConstraintRadius_8.setName("SketchConstraintRadius_13")
 model.do()
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_1_2f")], model.selection(), 100, 100, [model.selection("SOLID", "RevolutionFuse_4_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_9 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
 SketchLine_62 = Sketch_9.addLine(0, 84, 0, -2)
 SketchLine_62.setName("SketchLine_65")
@@ -771,7 +763,6 @@ SketchArc_13.result().setName("SketchArc_16")
 SketchArc_13.results()[1].setName("SketchArc_16_2")
 model.do()
 ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchArc_16_2f-SketchLine_81r-SketchLine_82f-SketchArc_17_2r-SketchLine_83f-SketchLine_84f-SketchLine_85r-SketchArc_18_2r"), model.selection("FACE", "Sketch_10/Face-SketchArc_19_2f-SketchLine_86r-SketchLine_87f-SketchArc_20_2r-SketchLine_88f-SketchLine_89f-SketchLine_90r-SketchArc_21_2r")], model.selection(), 20, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionFuse_3.result().setName("ExtrusionFuse_3_1")
 Sketch_11 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 SketchCircle_2 = Sketch_11.addCircle(89, 0, 6)
 SketchPoint_11 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_2/Vertex-SketchPoint_1-SketchLine_10s-SketchLine_9e"))
@@ -791,11 +782,8 @@ SketchMultiRotation_2 = Sketch_11.addRotation([SketchCircle_3.results()[1], Sket
 [SketchCircle_4, SketchCircle_5, SketchCircle_6, SketchCircle_7] = SketchMultiRotation_2.rotated()
 model.do()
 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "PartSet/OZ"), 0, 360, [model.selection("SOLID", "ExtrusionFuse_3_1")])
-RevolutionCut_1.result().setName("RevolutionCut_1_1")
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Wire-SketchCircle_4_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_5_2f")], model.selection(), 30, -15, [model.selection("SOLID", "RevolutionCut_1_1")])
-ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Wire-SketchCircle_2_2f"), model.selection("FACE", "Sketch_11/Face-SketchCircle_6_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_7_2f")], model.selection(), 30, 2, [model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 
 # Test reexecution after parameter change
 Parameter_R.setValue(5)
diff --git a/test.models/clothespin.py b/test.models/clothespin.py
index 368df3b77..ce87a87cd 100644
--- a/test.models/clothespin.py
+++ b/test.models/clothespin.py
@@ -181,7 +181,6 @@ SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchArc_3.endPoint(),
 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9"))
 SketchLine_21 = Sketch_3.addLine(28, -6, -4.270492394552598, -6.000000000000001)
 SketchLine_21.setName("SketchLine_23")
@@ -320,7 +319,6 @@ SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_58")
 SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_30.result(), SketchLine_25.result())
 model.do()
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
 SketchLine_37 = Sketch_4.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599)
 SketchLine_37.setName("SketchLine_39")
@@ -372,7 +370,6 @@ SketchLine_41.setName("SketchLine_43")
 SketchLine_41.result().setName("SketchLine_43")
 model.do()
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
 Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchArc_4 = Sketch_5.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True)
@@ -416,9 +413,7 @@ model.do()
 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), 6, True)
 Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 3, True)
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_6"))
 SketchArc_5 = Sketch_6.addArc(45.99999999999999, 0, 45.49999999999999, 8.91700958118717e-020, 46.49999999999999, 8.280962276646116e-019, False)
 SketchLine_53 = Sketch_6.addLine(0, 0, 54, 0)
@@ -470,7 +465,6 @@ SketchLine_56.setName("SketchLine_58")
 SketchLine_56.result().setName("SketchLine_58")
 model.do()
 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
-ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1")
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12"))
 SketchLine_64 = Sketch_7.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997)
 SketchLine_64.setName("SketchLine_76")
@@ -642,7 +636,6 @@ SketchConstraintRadius_7 = Sketch_7.setRadius(SketchArc_15.results()[1], 0.25)
 SketchConstraintRadius_8 = Sketch_7.setRadius(SketchArc_17.results()[1], 0.25)
 model.do()
 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_17"))
 SketchPoint_12 = Sketch_8.addPoint(53.99994409538203, -1.615587133892632e-027)
 SketchPoint_13 = Sketch_8.addPoint(53.99994409538203, -1.615587133892632e-027)
@@ -791,7 +784,6 @@ SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchPoint_21.coordina
 SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_145")
 model.do()
 ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")])
-ExtrusionCut_7.result().setName("ExtrusionCut_7_1")
 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_56"))
 SketchLine_94 = Sketch_9.addLine(21.00014787857639, 4.163450069699051, 21.00014787857639, 0)
 SketchLine_94.setName("SketchLine_107")
@@ -935,7 +927,6 @@ model.do()
 Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 4, False)
 Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 4, True)
 ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection(), model.selection("FACE", "Plane_5"), 0, model.selection("FACE", "Plane_4"), 0, [model.selection("SOLID", "ExtrusionCut_7_1")])
-ExtrusionCut_8.result().setName("ExtrusionCut_8_1")
 Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_8_1/Modfied_5"))
 SketchCircle_1 = Sketch_10.addCircle(12, 6, 1)
 SketchConstraintRadius_11 = Sketch_10.setRadius(SketchCircle_1.results()[1], 1)
@@ -962,7 +953,6 @@ SketchConstraintCoincidence_173.setName("SketchConstraintCoincidence_178")
 SketchConstraintDistance_17 = Sketch_10.setDistance(SketchLine_105.result(), SketchCircle_1.center(), 12)
 model.do()
 ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")])
-ExtrusionCut_9.result().setName("ExtrusionCut_9_1")
 model.do()
 Part_2 = model.addPart(partSet)
 Part_2_doc = Part_2.document()
@@ -1122,7 +1112,6 @@ SketchConstraintCoincidence_199 = Sketch_12.setCoincident(SketchArc_26.endPoint(
 SketchConstraintCoincidence_199.setName("SketchConstraintCoincidence_30")
 model.do()
 ExtrusionCut_10 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_10.result().setName("ExtrusionCut_1_1")
 Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9"))
 SketchLine_127 = Sketch_13.addLine(28, -6, -4.270492394552598, -6.000000000000001)
 SketchLine_127.setName("SketchLine_23")
@@ -1261,7 +1250,6 @@ SketchConstraintCoincidence_227.setName("SketchConstraintCoincidence_58")
 SketchConstraintEqual_5 = Sketch_13.setEqual(SketchLine_136.result(), SketchLine_131.result())
 model.do()
 ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_11.result().setName("ExtrusionCut_2_1")
 Sketch_14 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
 SketchLine_143 = Sketch_14.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599)
 SketchLine_143.setName("SketchLine_39")
@@ -1313,7 +1301,6 @@ SketchLine_147.setName("SketchLine_43")
 SketchLine_147.result().setName("SketchLine_43")
 model.do()
 ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_12.result().setName("ExtrusionCut_3_1")
 Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
 Sketch_15 = model.addSketch(Part_2_doc, model.selection("FACE", "Plane_1"))
 SketchArc_27 = Sketch_15.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True)
@@ -1357,9 +1344,7 @@ model.do()
 Plane_10 = model.addPlane(Part_2_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), 6, True)
 Plane_11 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 3, True)
 ExtrusionCut_13 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_13.result().setName("ExtrusionCut_4_1")
 ExtrusionCut_14 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_14.result().setName("ExtrusionCut_5_1")
 Sketch_16 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_6"))
 SketchArc_28 = Sketch_16.addArc(45.99999999999999, 0, 45.49999999999999, 8.91700958118717e-020, 46.49999999999999, 8.280962276646116e-019, False)
 SketchLine_159 = Sketch_16.addLine(0, 0, 54, 0)
@@ -1411,7 +1396,6 @@ SketchLine_162.setName("SketchLine_58")
 SketchLine_162.result().setName("SketchLine_58")
 model.do()
 ExtrusionFuse_2 = model.addExtrusionFuse(Part_2_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
-ExtrusionFuse_2.result().setName("ExtrusionFuse_1_1")
 Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12"))
 SketchLine_170 = Sketch_17.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997)
 SketchLine_170.setName("SketchLine_76")
@@ -1583,7 +1567,6 @@ SketchConstraintRadius_18 = Sketch_17.setRadius(SketchArc_38.results()[1], 0.25)
 SketchConstraintRadius_19 = Sketch_17.setRadius(SketchArc_40.results()[1], 0.25)
 model.do()
 ExtrusionCut_15 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-ExtrusionCut_15.result().setName("ExtrusionCut_6_1")
 Sketch_18 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_17"))
 SketchPoint_36 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027)
 SketchPoint_37 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027)
@@ -1732,7 +1715,6 @@ SketchConstraintCoincidence_314 = Sketch_18.setCoincident(SketchPoint_45.coordin
 SketchConstraintCoincidence_314.setName("SketchConstraintCoincidence_145")
 model.do()
 ExtrusionCut_16 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")])
-ExtrusionCut_16.result().setName("ExtrusionCut_7_1")
 Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_56"))
 SketchLine_200 = Sketch_19.addLine(21.00014787857639, 4.163450069699051, 21.00014787857639, 0)
 SketchLine_200.setName("SketchLine_107")
@@ -1876,7 +1858,6 @@ model.do()
 Plane_12 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, False)
 Plane_13 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, True)
 ExtrusionCut_17 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection(), model.selection("FACE", "Plane_5"), 0, model.selection("FACE", "Plane_4"), 0, [model.selection("SOLID", "ExtrusionCut_7_1")])
-ExtrusionCut_17.result().setName("ExtrusionCut_8_1")
 Sketch_20 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_8_1/Modfied_5"))
 SketchCircle_2 = Sketch_20.addCircle(12, 6, 1)
 SketchConstraintRadius_22 = Sketch_20.setRadius(SketchCircle_2.results()[1], 1)
@@ -1903,7 +1884,6 @@ SketchConstraintCoincidence_346.setName("SketchConstraintCoincidence_178")
 SketchConstraintDistance_34 = Sketch_20.setDistance(SketchLine_211.result(), SketchCircle_2.center(), 12)
 model.do()
 ExtrusionCut_18 = model.addExtrusionCut(Part_2_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")])
-ExtrusionCut_18.result().setName("ExtrusionCut_9_1")
 model.do()
 Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/ExtrusionCut_9_1/Modfied_1&ExtrusionCut_7_1/Modfied_57"), 180)
 Placement_1 = model.addPlacement(partSet, [model.selection("COMPOUND", "Rotation_1/")], model.selection("FACE", "Rotation_1/ExtrusionCut_5_1/Modfied_1"), model.selection("FACE", "Part_1/ExtrusionCut_5_1/Modfied_1"), False, True)
diff --git a/test.models/ecran.py b/test.models/ecran.py
index 8f5c6417c..a5a6b2019 100644
--- a/test.models/ecran.py
+++ b/test.models/ecran.py
@@ -117,7 +117,6 @@ SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_5.result(), S
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.")
 Extrusion_1.setName("Profil")
-Extrusion_1.result().setName("Extrusion_1_1")
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
 SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3)
 SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
@@ -158,7 +157,6 @@ SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_1.setName("Decoupe_Angle")
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"))
 SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3)
 SketchLine_22.setName("SketchLine_29")
@@ -206,7 +204,6 @@ Sketch_3.setName("Sketch_4")
 Sketch_3.result().setName("Sketch_4")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionCut_2.setName("Chamfrein_1")
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"))
 SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3)
 SketchLine_30.setName("SketchLine_35")
@@ -292,7 +289,6 @@ model.do()
 Sketch_4.setName("Sketch_5")
 Sketch_4.result().setName("Sketch_5")
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_7"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"))
 SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714)
 SketchLine_40.setName("SketchLine_58")
@@ -511,7 +507,6 @@ model.do()
 Sketch_5.setName("Sketch_6")
 Sketch_5.result().setName("Sketch_6")
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_1"))
 SketchArc_11 = Sketch_6.addArc(44.89, -23.54999053274703, 43.89, -23.54999053274703, 44.89, -22.54999053274703, False)
 SketchArc_12 = Sketch_6.addArc(44.89, -13.54999053274703, 44.89, -14.54999053274703, 43.89, -13.54999053274703, False)
@@ -848,7 +843,6 @@ model.do()
 Sketch_6.setName("Sketch_7")
 Sketch_6.result().setName("Sketch_7")
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1"))
 SketchLine_126 = Sketch_7.addLine(-153.5, -37.049990532747, -152.3000099350335, -37.0499905327475)
 SketchLine_126.setName("SketchLine_135")
@@ -942,7 +936,6 @@ model.do()
 Sketch_7.setName("Sketch_8")
 Sketch_7.result().setName("Sketch_8")
 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_5_1")])
-ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_2"))
 SketchLine_134 = Sketch_8.addLine(0.85, 50.75, -0.85, 50.75)
 SketchLine_134.setName("SketchLine_139")
@@ -1067,7 +1060,6 @@ model.do()
 Sketch_8.setName("Sketch_9")
 Sketch_8.result().setName("Sketch_9")
 ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_147f-SketchLine_148f-SketchArc_64_2f-SketchArc_65_2f"), model.selection("FACE", "Sketch_9/Face-SketchLine_139f-SketchLine_141f-SketchArc_63_2f-SketchArc_62_2f"), model.selection("FACE", "Sketch_9/Face-SketchArc_66_2f-SketchArc_67_2f-SketchLine_149r-SketchLine_150r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_6_1")])
-ExtrusionCut_7.result().setName("ExtrusionCut_7_1")
 model.do()
 
 # Test reexecution after parameter change
diff --git a/test.models/flange.py b/test.models/flange.py
index 2ab00bd2e..540cc8535 100644
--- a/test.models/flange.py
+++ b/test.models/flange.py
@@ -83,7 +83,6 @@ SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_9.endPoint(),
 model.do()
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2f-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
 Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_1_1")])
-Boolean_1.result().setName("Boolean_1_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
 SketchLine_12 = Sketch_3.addLine(2.220446049250313e-016, 106, -4, 106)
 SketchLine_13 = Sketch_3.addLine(-4, 106, -4, 67.34428877022477)
@@ -122,7 +121,6 @@ SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
 model.do()
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_12f-SketchLine_13f-SketchLine_17r-SketchLine_18r-SketchArc_10_2f")], model.selection(), "172/2", "172/2")
 Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Boolean_2.result().setName("Boolean_2_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
 SketchLine_18 = Sketch_4.addLine(-65, 16, -65, -16)
 SketchLine_18.setName("SketchLine_19")
@@ -171,8 +169,6 @@ SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_12.results()[1], Sketc
 model.do()
 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchLine_21f-SketchLine_22r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"), 0)
 MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "Extrusion_1_1/To_Face_1&Extrusion_1_1/Generated_Face_2"), -130, 2)
-MultiTranslation_1.result().setName("MultiTranslation_1_1")
 Boolean_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_2_1")], [model.selection("COMPOUND", "MultiTranslation_1_1")])
-Boolean_3.result().setName("Boolean_3_1")
 model.do()
 model.end()
diff --git a/test.models/gear.py b/test.models/gear.py
index 065a84dbf..4c042e49a 100644
--- a/test.models/gear.py
+++ b/test.models/gear.py
@@ -197,11 +197,8 @@ SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_6.coordinate
 SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_6.coordinates(), SketchLine_86.result(), 24.5)
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "PartSet/OX"), 0, 360, [model.selection("SOLID", "ExtrusionCut_1_1")])
-RevolutionCut_1.result().setName("RevolutionCut_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 0, 5, [model.selection("SOLID", "RevolutionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 model.do()
 
 # Test reexecution after parameter change
diff --git a/test.models/idler_plate.py b/test.models/idler_plate.py
index d3880bd79..2b08107f3 100644
--- a/test.models/idler_plate.py
+++ b/test.models/idler_plate.py
@@ -165,11 +165,7 @@ Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-Sketc
 Face_2 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_1/Edge-SketchCircle_2_2")])
 Face_3 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")])
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_3_1")], model.selection(), 2, 0)
-Extrusion_2.result().setName("Extrusion_2_1")
-Extrusion_2.results()[1].setName("Extrusion_2_2")
-Extrusion_2.results()[2].setName("Extrusion_2_3")
 Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2"), model.selection("SOLID", "Extrusion_2_3")], [])
-Boolean_1.result().setName("Boolean_1_1")
 model.do()
 
 # Test reexecution after parameter change
diff --git a/test.models/piece_02.py b/test.models/piece_02.py
index e9a036f83..5862eaa4f 100644
--- a/test.models/piece_02.py
+++ b/test.models/piece_02.py
@@ -129,9 +129,7 @@ SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_2.results()[1], 2.5)
 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_12.result(), SketchCircle_4.center(), 8)
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2r"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_3_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
 SketchCircle_5 = Sketch_3.addCircle(20.99999999999342, 22.99999999999327, 19)
 SketchConstraintRadius_4 = Sketch_3.setRadius(SketchCircle_5.results()[1], 19)
@@ -370,11 +368,7 @@ SketchConstraintMiddle_16 = Sketch_5.setMiddlePoint(SketchLine_37.endPoint(), Sk
 SketchConstraintDistance_12 = Sketch_5.setDistance(SketchCircle_8.center(), SketchLine_37.result(), 8)
 model.do()
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_29f-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchArc_9_2f-SketchArc_10_2f-SketchArc_11_2f-SketchArc_12_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
-ExtrusionCut_4.results()[1].setName("ExtrusionCut_4_2")
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_8_2f"), model.selection("FACE", "Sketch_5/Face-SketchCircle_9_2f")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionCut_4_1"), model.selection("SOLID", "ExtrusionCut_4_2")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
-ExtrusionCut_5.results()[1].setName("ExtrusionCut_5_2")
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
 SketchLine_38 = Sketch_6.addLine(-59, 44, -59, 2)
 SketchLine_38.setName("SketchLine_39")
@@ -446,7 +440,6 @@ SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), Ske
 SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17)
 model.do()
 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_5"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
-ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"))
 SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655)
 SketchLine_49.setName("SketchLine_50")
@@ -586,7 +579,6 @@ SketchConstraintCoincidence_94 = Sketch_9.setCoincident(SketchLine_60.endPoint()
 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_95")
 model.do()
 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")])
-RevolutionCut_1.result().setName("RevolutionCut_1_1")
 model.do()
 
 from GeomAPI import  GeomAPI_Shape
diff --git a/test.models/piece_09.py b/test.models/piece_09.py
index 969bfacd3..b10608231 100644
--- a/test.models/piece_09.py
+++ b/test.models/piece_09.py
@@ -260,9 +260,7 @@ SketchConstraintDistance_17 = Sketch_3.setDistance(SketchLine_26.result(), Sketc
 SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_26.result(), "d7*coeff")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_24r-SketchLine_26r-SketchLine_27r-SketchLine_28r-SketchLine_29r")], model.selection(), model.selection("FACE", "Extrusion_2_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_2_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchLine_33r")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), "d3*coeff", True)
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
 SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_1"))
@@ -317,7 +315,6 @@ SketchConstraintDistance_22 = Sketch_5.setDistance(SketchCircle_1.center(), Sket
 SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_1.results()[1], "r_trou")
 model.do()
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_6"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_6"))
 SketchCircle_2 = Sketch_6.addCircle(70, -17.5, 5)
 SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"))
@@ -331,7 +328,6 @@ SketchConstraintDistance_24 = Sketch_6.setDistance(SketchCircle_2.center(), Sket
 SketchConstraintDistance_24.setName("SketchConstraintDistance_25")
 model.do()
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_16"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"))
 SketchLine_51 = Sketch_7.addLine(110, 21.46600893000899, 110, 7.22841614740048)
 SketchLine_51.setAuxiliary(True)
@@ -376,9 +372,7 @@ SketchConstraintMirror_2 = Sketch_7.addMirror(SketchLine_59.result(), SketchCons
 [SketchArc_17, SketchLine_63, SketchLine_64, SketchArc_18, SketchLine_65, SketchLine_66] = SketchConstraintMirror_2.mirrored()
 model.do()
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2r-SketchLine_61f-SketchLine_62r"), model.selection("FACE", "Sketch_7/Face-SketchArc_18_2r-SketchLine_65f-SketchLine_66r"), model.selection("FACE", "Sketch_7/Face-SketchArc_17_2r-SketchLine_64r-SketchLine_66r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_15_2r-SketchLine_54f-SketchLine_55r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_10"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
 Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_5_1")], [model.selection("SOLID", "Extrusion_3_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
-Boolean_1.result().setName("Boolean_1_1")
 model.do()
 
 from GeomAPI import  GeomAPI_Shape
diff --git a/test.models/piece_12.py b/test.models/piece_12.py
index f4159d38f..530909080 100644
--- a/test.models/piece_12.py
+++ b/test.models/piece_12.py
@@ -343,14 +343,9 @@ SketchConstraintRadius_9.setName("SketchConstraintRadius_6")
 model.do()
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), "10*coeff", 0)
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_3_2f")], model.selection(), "p_trou1*coeff", 0, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_1_2r")], model.selection(), "p2_trou1*coeff", 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_4_2f")], model.selection(), "p_trou2*coeff", 0, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-ExtrusionCut_3.results()[1].setName("ExtrusionCut_3_2")
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_2_2r")], model.selection(), "p2_trou*coeff", 0, [model.selection("SOLID", "ExtrusionCut_3_2")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "22.5*coeff", False)
 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "45*coeff", True)
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
@@ -437,11 +432,8 @@ SketchConstraintDistance_14.setName("SketchConstraintDistance_12")
 model.do()
 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0)
 Boolean_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "ExtrusionCut_4_1")])
-Boolean_1.result().setName("Boolean_1_1")
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "Boolean_1_1_1")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_5_1_1")])
-ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
 Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1_2/Modfied_1"))
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OY"))
@@ -528,11 +520,8 @@ SketchConstraintLength_10.setName("SketchConstraintLength_7")
 model.do()
 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0)
 Boolean_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_6_1_1"), model.selection("SOLID", "Extrusion_4_1")], [model.selection("SOLID", "ExtrusionCut_6_1_2")])
-Boolean_2.result().setName("Boolean_2_1")
 ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Boolean_2_1_1")])
-ExtrusionCut_7.result().setName("ExtrusionCut_7_1")
 ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_7_1_1")])
-ExtrusionCut_8.result().setName("ExtrusionCut_8_1")
 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Boolean_2_1_1/Modified_1"))
 SketchPoint_3 = Sketch_5.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 SketchPoint_3.setName("SketchPoint_2")
@@ -675,7 +664,6 @@ SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_11.results()[1], "r3
 SketchConstraintRadius_14.setName("SketchConstraintRadius_12")
 model.do()
 ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")])
-ExtrusionCut_9.result().setName("ExtrusionCut_9_1")
 ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_7_2r-SketchArc_10_2f-SketchLine_44r-SketchArc_12_2r-SketchArc_13_2r-SketchLine_48r-SketchLine_43f-SketchArc_14_2f"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_50f-SketchArc_15_2f-SketchArc_16_2r-SketchLine_51r-SketchArc_17_2r-SketchLine_52f"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchArc_8_2r-SketchArc_9_2f-SketchLine_42r-SketchLine_45f-SketchLine_46r-SketchArc_11_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modfied_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")])
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_1"))
 SketchLine_50 = Sketch_8.addLine(37, 14.80042035331162, 37, -14)
@@ -776,7 +764,6 @@ SketchConstraintRadius_16 = Sketch_9.setRadius(SketchArc_23.results()[1], "3*coe
 SketchConstraintRadius_16.setName("SketchConstraintRadius_17")
 model.do()
 ExtrusionCut_12 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchArc_25_2r-SketchLine_67f-SketchLine_68f")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "Extrusion_5_1")])
-ExtrusionCut_12.result().setName("ExtrusionCut_12_1")
 model.do()
 
 from GeomAPI import  GeomAPI_Shape