From: eap <eap@opencascade.com>
Date: Thu, 25 Feb 2010 14:57:40 +0000 (+0000)
Subject: 0020627: EDF 1165 HEXOTIC : Allow Hexotic to start from a 2D mesh
X-Git-Tag: V5_1_4a1~65
X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=b2f987804d3d42c6ba3343460930780e79cf377b;p=modules%2Fsmesh.git

0020627: EDF 1165 HEXOTIC : Allow Hexotic to start from a 2D mesh
---

diff --git a/doc/salome/gui/SMESH/images/hexotic_parameters.png b/doc/salome/gui/SMESH/images/hexotic_parameters.png
new file mode 100644
index 000000000..c06ff3bb2
Binary files /dev/null and b/doc/salome/gui/SMESH/images/hexotic_parameters.png differ
diff --git a/doc/salome/gui/SMESH/input/about_hypo.doc b/doc/salome/gui/SMESH/input/about_hypo.doc
index cc8f5fd52..9d9db7b32 100644
--- a/doc/salome/gui/SMESH/input/about_hypo.doc
+++ b/doc/salome/gui/SMESH/input/about_hypo.doc
@@ -45,6 +45,7 @@ meshers and thus, work only with definite algorithms.
 <li>\subpage ghs3d_hypo_page</li> - works with GHS3D algorithm.
 <li>\subpage ghs3dprl_hypo_page</li> - works with GHS3DPRL (tepal) algorithm.
 <li>\subpage blsurf_hypo_page</li> - works with BLSURF algorithm.
+<li>\subpage hexotic_hypo_page</li> - works with Hexotic algorithm.
 </ul>
 
 There also exist  
diff --git a/doc/salome/gui/SMESH/input/hexotic_hypo.doc b/doc/salome/gui/SMESH/input/hexotic_hypo.doc
new file mode 100644
index 000000000..68231b865
--- /dev/null
+++ b/doc/salome/gui/SMESH/input/hexotic_hypo.doc
@@ -0,0 +1,30 @@
+/*!
+
+\page hexotic_hypo_page Hexotic Parameters hypothesis
+
+\n Hexotic Parameters hypothesis works only with <b>Hexotic</b> 
+algorithm. This algorithm is a commercial software.
+
+\image html hexotic_parameters.png
+
+<ul>
+<li><b>Name</b> - allows to define the name of the hypothesis (Hexotic 
+Parameters by default).</li>
+
+<li><b>Nb. Hexes Max Level</b> - allows defining the maximal level of recursive partitioning on the initial octree cube.</li>
+
+<li><b>Nb. Hexes Min Level</b> - allows defining the minimal level of recursive partitioning on the initial octree cube.</li>
+
+<li><b>Salome Quadrangles</b> - not documented.</li>
+
+<li><b>Generate smooth meshes no ridges</b> - specifies that the mesher can ignore ridges. A ridge is a geometrical entity (a sharp edge). The resulting meshes will have better quality elements, at the price of "smoothing" out the geometry.
+</li>
+
+<li><b>Authorize invalid elements</b> - specifies that the mesher must conform as much as possible to the geometry (especially the sharp edges). The resulting meshes may contain invalid elements (but with positive volumes: for example, three vertices of an hexahedron on the same edge), for the benefit of better geometry accuracy.
+</li>
+
+<li><b>Sharp angle threshold in degrees</b> - specifies the angle between two triangles above which the hex mesher will consider the edge common to these two triangles as being a "ridge". A ridge is a geometrical entity (a sharp edge) which has to be kept as it is in the final hex mesh.The default value is 60 (degrees).<br>If you raise this value, the hex mesher will detect less ridges, and the final solid mesh will therefore be smoother. On the other hand, if you reduce this value, more ridges will be detected and the algorithm will face harder situations to conform to.
+</li>
+
+
+*/