From: jfa Date: Tue, 17 Sep 2019 11:14:18 +0000 (+0300) Subject: AA X-Git-Tag: V9_4_0a2~4^2~81^2~6 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=a0310478aa502d563c34ef5c61fda3092b6ab01a;p=modules%2Fshaper.git AA --- diff --git a/src/BuildPlugin/BuildPlugin_msg_fr.ts b/src/BuildPlugin/BuildPlugin_msg_fr.ts index f53ca1038..e246b2894 100644 --- a/src/BuildPlugin/BuildPlugin_msg_fr.ts +++ b/src/BuildPlugin/BuildPlugin_msg_fr.ts @@ -2,6 +2,58 @@ + + workshop + + CompSolid + AA + + + Compound + AA + + + Edge + AA + + + Face + AA + + + Filling + AA + + + Interpolation + AA + + + Polyline + AA + + + Shell + AA + + + Solid + AA + + + Sub-Shapes + AA + + + Vertex + AA + + + Wire + AA + + + @@ -477,6 +529,31 @@ AA + + CompSolid:BuildPlugin_ValidatorBaseForSolids + + Empty selection list. + AA + + + + CompSolid:base_objects + + Select solids or compsolids. + AA + + + Solids and CompSolids: + AA + + + + CompSolid:base_objects:BuildPlugin_ValidatorBaseForBuild + + Empty selection list. + AA + + Compound @@ -489,6 +566,24 @@ AA + + Compound:Model_FeatureValidator + + Attribute "base_objects" is not initialized. + AA + + + + Compound:base_objects + + Objects: + AA + + + Select any kind of objects. + AA + + Edge @@ -501,6 +596,71 @@ AA + + Edge:Model_FeatureValidator + + Attribute "first_point" is not initialized. + AA + + + + Edge:base_objects + + Edges: + AA + + + Select edges on sketch or edges objects. + AA + + + + Edge:creation_method + + By segments + AA + + + By two points + AA + + + + Edge:first_point + + First point + AA + + + Select a first point + AA + + + + Edge:first_point:GeomValidators_ConstructionComposite + + The result is empty + AA + + + + Edge:second_point + + Second point + AA + + + Select a second point + AA + + + + Edge:second_point:GeomValidators_ConstructionComposite + + The result is empty + AA + + Face @@ -513,6 +673,17 @@ AA + + Face:base_objects + + Objects: + AA + + + Select edges, wires or faces. + AA + + Filling @@ -525,6 +696,81 @@ AA + + Filling:advanced_options + + Advanced options + AA + + + + Filling:approximation + + Approximation + AA + + + + Filling:base_objects + + Segments and wires: + AA + + + Select edges or wires. + AA + + + + Filling:max_degree + + Max deg + AA + + + + Filling:min_degree + + Min deg + AA + + + + Filling:nb_iter + + Nb iter + AA + + + + Filling:orientation + + Auto-correct edges orientation + AA + + + Use curve information + AA + + + Use edges orientation + AA + + + + Filling:tol_2d + + Tol 2D + AA + + + + Filling:tol_3d + + Tol 3D + AA + + Interpolation @@ -537,6 +783,72 @@ AA + + Interpolation:base_objects + + Points and vertices: + AA + + + Select points or vertices objects. + AA + + + + Interpolation:closed + + Closed + AA + + + + Interpolation:reorder + + Changes the order of points to construct the shortest curve. + AA + + + Reorder + AA + + + + Interpolation:tangent_end + + <end> + AA + + + End + AA + + + Select vector tangent to the end of curve + AA + + + + Interpolation:tangent_start + + <start> + AA + + + Select vector tangent to the start of curve + AA + + + Start + AA + + + + Interpolation:use_tangents + + Tangents + AA + + Polyline @@ -549,6 +861,28 @@ AA + + Polyline:base_objects + + Points and vertices: + AA + + + Select points or vertices objects. + AA + + + + Polyline:closed + + Closed + AA + + + Makes the polyline closed. + AA + + Shell @@ -561,6 +895,24 @@ AA + + Shell:base_objects + + Faces and shells: + AA + + + Select faces or shells objects. + AA + + + + Shell:base_objects:BuildPlugin_ValidatorBaseForBuild + + Empty selection list. + AA + + Solid @@ -573,6 +925,31 @@ AA + + Solid:BuildPlugin_ValidatorBaseForSolids + + Empty selection list. + AA + + + + Solid:base_objects + + Faces and shells: + AA + + + Select faces or shells. + AA + + + + Solid:base_objects:BuildPlugin_ValidatorBaseForBuild + + Empty selection list. + AA + + SubShapes @@ -585,6 +962,28 @@ AA + + SubShapes:base_shape + + Select a shape to modify. + AA + + + Shape: + AA + + + + SubShapes:subshapes + + Select shapes on sketch to add. + AA + + + Sub-Shapes: + AA + + Vertex @@ -597,6 +996,17 @@ AA + + Vertex:base_objects + + Select vertices on sketch or vertex objects. + AA + + + Vertices: + AA + + Wire @@ -609,5 +1019,27 @@ AA + + Wire:add_contour + + Add contour + AA + + + Adds to the list of segments other segments of the sketcher connected to the already selected ones to create a closed contour. + AA + + + + Wire:base_objects + + Segments and wires: + AA + + + Select edges on sketch, edges or wires objects. + AA + + diff --git a/src/CollectionPlugin/CollectionPlugin_msg_fr.ts b/src/CollectionPlugin/CollectionPlugin_msg_fr.ts index 1739850bd..38885da14 100644 --- a/src/CollectionPlugin/CollectionPlugin_msg_fr.ts +++ b/src/CollectionPlugin/CollectionPlugin_msg_fr.ts @@ -2,77 +2,111 @@ - - - Group:group_list:GeomValidators_BodyShapes + workshop - Error: Context is empty. + Field + AA + + + Group + AA + + + Group Addition + AA + + + Group Intersection + AA + + + Group Substraction AA + + - Group:group_list:GeomValidators_BodyShapes + Field - Error: Result construction selected. + Create fields for selected shapes + AA + + + Field AA - Group:group_list:GeomValidators_BodyShapes + Field:Model_FeatureValidator - Error: Attribute \"%1\" does not supported by this validator. + Attribute "components_names" is not initialized. AA - Group:Model_FeatureValidator + Field:CollectionPlugin_FieldValidator - Attribute "group_list" is not initialized. + Selection list is not initialized AA + + - Field:Model_FeatureValidator + Group - Attribute "components_names" is not initialized. + Create named collection of geometry entities + AA + + + Group AA - GroupIntersection:EmptyResult + Group:group_list - Error: Empty result. + Select a set of objects AA - - - - Field + Group:group_list:GeomValidators_BodyShapes - Create fields for selected shapes + Error: Context is empty. AA - Field + Error: Result construction selected. + AA + + + Error: Attribute \"%1\" does not supported by this validator. AA - - Group + Group:Model_FeatureValidator - Create named collection of geometry entities + Attribute "group_list" is not initialized. AA + + + Group:name - Group + Name + AA + + + Please input the group name AA + GroupAddition @@ -84,7 +118,37 @@ AA + + GroupAddition:Model_FeatureValidator + + Attribute "group_list" is not initialized. + AA + + + + GroupAddition:group_list + + Base groups: + AA + + + Select a set of groups + AA + + + + GroupAddition:name + + Name + AA + + + Please input the group name + AA + + + GroupIntersection @@ -96,7 +160,44 @@ AA + + GroupIntersection:EmptyResult + + Error: Empty result. + AA + + + + GroupIntersection:Model_FeatureValidator + + Attribute "group_list" is not initialized. + AA + + + + GroupIntersection:group_list + + Base groups: + AA + + + Select a set of groups + AA + + + + GroupIntersection:name + + Name + AA + + + Please input the group name + AA + + + GroupSubstraction @@ -108,5 +209,45 @@ AA + + GroupSubstraction:Model_FeatureValidator + + Attribute "group_list" is not initialized. + AA + + + + GroupSubstraction:group_list + + Main groups: + AA + + + Select a set of groups + AA + + + + GroupSubstraction:name + + Name + AA + + + Please input the group name + AA + + + + GroupSubstraction:tools_list + + Select a set of groups + AA + + + Tool groups: + AA + + diff --git a/src/ConstructionPlugin/ConstructionPlugin_msg_fr.ts b/src/ConstructionPlugin/ConstructionPlugin_msg_fr.ts index dc28b7dce..10738e7ba 100644 --- a/src/ConstructionPlugin/ConstructionPlugin_msg_fr.ts +++ b/src/ConstructionPlugin/ConstructionPlugin_msg_fr.ts @@ -3,17 +3,16 @@ - Axis:CylindricalFace:GeomValidators_Face + workshop - The attribute with the %1 type is not processed + Axis AA - - workshop + Axis:CylindricalFace:GeomValidators_Face - Axis + The attribute with the %1 type is not processed AA @@ -439,6 +438,33 @@ AA + + Axis:CreationMethod + + As axis of cylindrical face + AA + + + By line + AA + + + By plane and point + AA + + + By three dimensions + AA + + + By two planes + AA + + + By two points + AA + + workshop diff --git a/src/ExchangePlugin/ExchangePlugin_msg_fr.ts b/src/ExchangePlugin/ExchangePlugin_msg_fr.ts index c1cb662d3..d13cb7e1b 100644 --- a/src/ExchangePlugin/ExchangePlugin_msg_fr.ts +++ b/src/ExchangePlugin/ExchangePlugin_msg_fr.ts @@ -2,23 +2,57 @@ - + + workshop + + Dump + AA + + + Export + AA + + + Import + AA + + + - Import:Model_FeatureValidator + Dump - Attribute "file_path" is not initialized. + Dump + AA + + + Dump python script AA - Import:file_path:ExchangePlugin_ImportFormat + Dump:Model_FeatureValidator + + Attribute "file_format" is not initialized. + AA + + + + Dump:file_path + + Dump to file + AA + + + + Dump:file_path:ExchangePlugin_ExportFormat File name is empty. AA + Export:Model_FeatureValidator @@ -93,33 +127,98 @@ AA - - - - Dump + Export - Dump + Export AA - Dump python script + Export to file AA - - Export + Export:ExportType - Export + BREP, STEP, IGES AA - Export to file + XAO + AA + + + + Export:file_path + + Export file + AA + + + + Export:selection_list + + Select a set of objects + AA + + + + Export:xao_author + + Author + AA + + + Please input the author + AA + + + + Export:xao_file_path + + Export file + AA + + + + Export:xao_file_path:ExchangePlugin_ExportFormat + + %1 is not initialized. + AA + + + File name is empty. + AA + + + + Export:xao_geometry_name + + Geometry name + AA + + + Please input the geometry name AA + + + Import:Model_FeatureValidator + + Attribute "file_path" is not initialized. + AA + + + + Import:file_path:ExchangePlugin_ImportFormat + + File name is empty. + AA + + Import @@ -131,5 +230,12 @@ AA + + Import:file_path + + Import file + AA + + diff --git a/src/FeaturesPlugin/FeaturesPlugin_msg_fr.ts b/src/FeaturesPlugin/FeaturesPlugin_msg_fr.ts index 434964346..156ad3107 100644 --- a/src/FeaturesPlugin/FeaturesPlugin_msg_fr.ts +++ b/src/FeaturesPlugin/FeaturesPlugin_msg_fr.ts @@ -85,17 +85,33 @@ Union AA - - - - - AngularCopy + Angular Copy AA - Perform copy and rotate + Linear copy + AA + + + Measurement + AA + + + Placement + AA + + + Rotation + AA + + + Symmetry + AA + + + Translation AA @@ -655,32 +671,6 @@ - - - LinearCopy - - Linear copy - AA - - - Perform copy and translate - AA - - - - - - Measurement - - Calculate properties of objects - AA - - - Measurement - AA - - - Partition @@ -791,19 +781,6 @@ - - - Placement - - Place objects relatively to another one - AA - - - Placement - AA - - - Recover @@ -853,19 +830,6 @@ - - - Rotation - - Perform rotation of objects around the axis to specified angle - AA - - - Rotation - AA - - - Remove_SubShapes @@ -1461,32 +1425,6 @@ - - - Symmetry - - Perform symmetry with respect to a point, an axis or a plane - AA - - - Symmetry - AA - - - - - - Translation - - Perform translation of objects along the axis to specified distance - AA - - - Translation - AA - - - Union @@ -5362,4 +5300,829 @@ + + + + + AngularCopy + + Angular Copy + AA + + + Perform copy and rotate + AA + + + + AngularCopy:Model_FeatureValidator + + Attribute "axis_angular" is not initialized. + AA + + + + AngularCopy:axis_angular + + Axis + AA + + + Select an edge for the axis of rotation + AA + + + + AngularCopy:axis_angular:GeomValidators_ShapeType + + The object is empty + AA + + + + AngularCopy:main_objects + + Main objects + AA + + + Select objects + AA + + + + AngularCopy:nb_angular + + Nb copies + AA + + + Number of copies for the angular copy + AA + + + + AngularCopy:step_angular + + Angular step + AA + + + Step for the angular direction + AA + + + + + + LinearCopy + + Linear copy + AA + + + Perform copy and translate + AA + + + + LinearCopy:Model_FeatureValidator + + Attribute "axis_first_dir" is not initialized. + AA + + + + LinearCopy:axis_first_dir + + Axis + AA + + + Select an edge for the first direction + AA + + + + LinearCopy:axis_first_dir:GeomValidators_ShapeType + + The object is empty + AA + + + + LinearCopy:axis_second_dir + + Axis + AA + + + Select an edge for the second direction + AA + + + + LinearCopy:main_objects + + Main objects + AA + + + Select objects + AA + + + + LinearCopy:nb_first_dir + + Nb copies + AA + + + Number of copies for the first direction + AA + + + + LinearCopy:nb_second_dir + + Nb copies + AA + + + Number of copies for the second direction + AA + + + + LinearCopy:step_first_dir + + Step + AA + + + Step for the first direction + AA + + + + LinearCopy:step_second_dir + + Step + AA + + + Step for the second direction + AA + + + + LinearCopy:use_second_dir + + Second direction + AA + + + + + + Measurement + + Calculate properties of objects + AA + + + Measurement + AA + + + + Measurement:MeasureKind + + Angle between edges + AA + + + Angle by 3 points + AA + + + Distance between objects + AA + + + Edge length + AA + + + Radius of circular + AA + + + + Measurement:Model_FeatureValidator + + Attribute "angle_from" is not initialized. + AA + + + Attribute "angle_point_1" is not initialized. + AA + + + Attribute "circular" is not initialized. + AA + + + Attribute "distance_from" is not initialized. + AA + + + Attribute "edge_for_length" is not initialized. + AA + + + + Measurement:angle_from + + First edge + AA + + + Select an edge + AA + + + + Measurement:angle_from:GeomValidators_ShapeType + + The object is empty + AA + + + + Measurement:angle_point_1 + + Select a point + AA + + + Start point + AA + + + + Measurement:angle_point_1:GeomValidators_ShapeType + + The object is empty + AA + + + + Measurement:angle_point_2 + + Angle apex + AA + + + Select a point + AA + + + + Measurement:angle_point_2:GeomValidators_ShapeType + + The object is empty + AA + + + + Measurement:angle_point_3 + + End point + AA + + + Select a point + AA + + + + Measurement:angle_point_3:GeomValidators_ShapeType + + The object is empty + AA + + + + Measurement:angle_to + + Second edge + AA + + + Select an edge + AA + + + + Measurement:angle_to:GeomValidators_ShapeType + + The object is empty + AA + + + + Measurement:circular + + Object + AA + + + Select an edge or face + AA + + + + Measurement:distance_from + + From + AA + + + Select a shape + AA + + + + Measurement:distance_to + + Select a shape + AA + + + To + AA + + + + Measurement:edge_for_length + + Edge + AA + + + Select an edge + AA + + + + Measurement:edge_for_length:GeomValidators_ShapeType + + The object is empty + AA + + + + + + Placement + + Place objects relatively to another one + AA + + + Placement + AA + + + + Placement:placement_centering + + Center faces under placement + AA + + + Centering + AA + + + + Placement:placement_end_shape + + Select an end face, edge or vertex + AA + + + Select an object + AA + + + + Placement:placement_end_shape:GeomValidators_BodyShapes + + Error: Context is empty. + AA + + + + Placement:placement_objects_list + + Select objects + AA + + + Select objects to move + AA + + + + Placement:placement_reverse_direction + + Reverse + AA + + + Reverse placement direction + AA + + + + Placement:placement_start_shape + + Select a start face, edge or vertex + AA + + + Select an object + AA + + + + Placement:placement_start_shape:GeomValidators_BodyShapes + + Error: Context is empty. + AA + + + + + + Rotation + + Perform rotation of objects around the axis to specified angle + AA + + + Rotation + AA + + + + Rotation:CreationMethod + + By a center and two points + AA + + + By an axis and an angle + AA + + + + Rotation:Model_FeatureValidator + + Attribute "center_point" is not initialized. + AA + + + + Rotation:angle + + Angle + AA + + + + Rotation:axis_object + + Axis + AA + + + Select an edge for axis + AA + + + + Rotation:center_point + + Center point + AA + + + Select a center point + AA + + + + Rotation:center_point:GeomValidators_ConstructionComposite + + The result is empty + AA + + + + Rotation:end_point + + End point + AA + + + Select an end point + AA + + + + Rotation:end_point:GeomValidators_ConstructionComposite + + The result is empty + AA + + + + Rotation:main_objects + + Main objects + AA + + + Select solid objects + AA + + + + Rotation:start_point + + Select a starting point + AA + + + Start point + AA + + + + Rotation:start_point:GeomValidators_ConstructionComposite + + The result is empty + AA + + + + + + Symmetry + + Perform symmetry with respect to a point, an axis or a plane + AA + + + Symmetry + AA + + + + Symmetry:CreationMethod + + Axis reflection + AA + + + Plane reflection + AA + + + Point reflection + AA + + + + Symmetry:Model_FeatureValidator + + Attribute "axis_object" is not initialized. + AA + + + Attribute "main_objects" is not initialized. + AA + + + + Symmetry:axis_object + + Axis + AA + + + Select an axis + AA + + + + Symmetry:axis_object:GeomValidators_ShapeType + + The object is empty + AA + + + + Symmetry:keep_original + + Do not remove original shape + AA + + + Keep original result + AA + + + + Symmetry:main_objects + + Main objects + AA + + + Select solid objects + AA + + + + Symmetry:plane_object + + Plane + AA + + + Select a plane + AA + + + + Symmetry:point_object + + Point + AA + + + Select a point + AA + + + + Symmetry:point_object:GeomValidators_ShapeType + + The object is empty + AA + + + + + + Translation + + Perform translation of objects along the axis to specified distance + AA + + + Translation + AA + + + + Translation:CreationMethod + + By X, Y and Z dimensions + AA + + + By an axis and a distance + AA + + + By two points + AA + + + + Translation:Model_FeatureValidator + + Attribute "end_point" is not initialized. + AA + + + Attribute "main_objects" is not initialized. + AA + + + + Translation:axis_object + + Axis + AA + + + Select an edge for axis + AA + + + + Translation:distance + + Distance + AA + + + + Translation:dx + + DX + AA + + + Dimension in X + AA + + + + Translation:dy + + DY + AA + + + Dimension in Y + AA + + + + Translation:dz + + DZ + AA + + + Dimension in Z + AA + + + + Translation:end_point + + End point + AA + + + Select the end point to define the axis + AA + + + + Translation:end_point:GeomValidators_ConstructionComposite + + The result is empty + AA + + + + Translation:main_objects + + Main objects + AA + + + Select solid objects + AA + + + + Translation:start_point + + Select the start point to define the axis + AA + + + Start point + AA + + + + Translation:start_point:GeomValidators_ConstructionComposite + + The result is empty + AA + + + diff --git a/src/ParametersPlugin/ParametersPlugin_msg_fr.ts b/src/ParametersPlugin/ParametersPlugin_msg_fr.ts index 31199b111..ac9272ef0 100644 --- a/src/ParametersPlugin/ParametersPlugin_msg_fr.ts +++ b/src/ParametersPlugin/ParametersPlugin_msg_fr.ts @@ -2,6 +2,22 @@ + + workshop + + Parameter + AA + + + + + ModuleBase_Dialog + + Parameters + AA + + + Parameter @@ -16,24 +32,66 @@ Attribute "variable" is not initialized. AA + + Expression error. + AA + - - ParametersMgr + Parameter:Model_FeatureValidator - Manage parameters + Attribute "expression" is not initialized. AA + + + Parameter:comment - Parameters + Comment + AA + + + + Parameter:expression + + Please input the expression + AA + + + + Parameter:expression:Parameters_ExpressionValidator + + Attribute "%1" is not initialized. + AA + + + + Parameter:variable + + Name + AA + + + Please input the parameter name + AA + + + + Parameter:variable:Parameters_VariableValidator + + Attribute "%1" value is empty. AA - Parameter:Model_FeatureValidator + ParametersMgr - Attribute "expression" is not initialized. + Manage parameters + AA + + + Parameters AA diff --git a/src/PrimitivesPlugin/PrimitivesPlugin_msg_fr.ts b/src/PrimitivesPlugin/PrimitivesPlugin_msg_fr.ts index 7a67defb6..8bc69370c 100644 --- a/src/PrimitivesPlugin/PrimitivesPlugin_msg_fr.ts +++ b/src/PrimitivesPlugin/PrimitivesPlugin_msg_fr.ts @@ -2,6 +2,30 @@ + + workshop + + Box + AA + + + Cone + AA + + + Cylinder + AA + + + Sphere + AA + + + Torus + AA + + + Box @@ -13,6 +37,80 @@ AA + + Box:CreationMethod + + By dimensions + AA + + + By two points + AA + + + + Box:FirstPoint + + First point + AA + + + Select a first point + AA + + + + Box:Model_FeatureValidator + + Attribute "FirstPoint" is not initialized. + AA + + + + Box:SecondPoint + + Second point + AA + + + Select a second point + AA + + + + Box:dx + + DX + AA + + + Dimension in X + AA + + + + Box:dy + + DY + AA + + + Dimension in Y + AA + + + + Box:dz + + DZ + AA + + + Dimension in Z + AA + + + Cone @@ -24,6 +122,62 @@ AA + + Cone:axis + + Select the axis of the cone + AA + + + axis + AA + + + + Cone:base_point + + Select the center of the base of the cone + AA + + + base_point + AA + + + + Cone:base_radius + + Base radius + AA + + + Enter the base radius of the cone + AA + + + + Cone:height + + Enter the height of the cone + AA + + + height + AA + + + + Cone:top_radius + + Enter the top radius of the cone + AA + + + Top radius + AA + + + Cylinder @@ -35,6 +189,73 @@ AA + + Cylinder:CreationMethod + + Cylinder + AA + + + Portion of cylinder + AA + + + + Cylinder:angle + + Enter the angle of the portion of the cylinder + AA + + + angle + AA + + + + Cylinder:axis + + Select the axis of the cylinder + AA + + + axis + AA + + + + Cylinder:base_point + + Select the center of the base of the cylinder + AA + + + base_point + AA + + + + Cylinder:height + + Enter the height of the cylinder + AA + + + height + AA + + + + Cylinder:radius + + Enter the radius of the cylinder + AA + + + radius + AA + + + Sphere @@ -46,6 +267,29 @@ AA + + Sphere:center_point + + Center point + AA + + + Select a center point + AA + + + + Sphere:radius + + Enter a radius + AA + + + Radius + AA + + + Torus @@ -57,5 +301,49 @@ AA + + Torus:axis + + Select the axis of the torus + AA + + + axis + AA + + + + Torus:base_point + + Select the center of the torus + AA + + + base_point + AA + + + + Torus:radius + + Enter the radius of the torus + AA + + + Radius + AA + + + + Torus:ring_radius + + Enter the ring radius of the torus + AA + + + Ring radius + AA + + diff --git a/src/SketchPlugin/SketchPlugin_msg_fr.ts b/src/SketchPlugin/SketchPlugin_msg_fr.ts index 37a2949fd..ea2f9bd1b 100644 --- a/src/SketchPlugin/SketchPlugin_msg_fr.ts +++ b/src/SketchPlugin/SketchPlugin_msg_fr.ts @@ -2,6 +2,131 @@ + + + + + Attribute "%1" is locked by modification value in the viewer. + AA + + + Attribute "%1" is not initialized. + AA + + + + + workshop + + Sketch drawer + AA + + + Angle + AA + + + Angular copy + AA + + + Arc + AA + + + Circle + AA + + + Coincident + AA + + + Collinear + AA + + + Distance + AA + + + Ellipse + AA + + + Equal + AA + + + Fixed + AA + + + Horizontal + AA + + + Horizontal Distance + AA + + + Length + AA + + + Line + AA + + + Middle point + AA + + + Mirror copy + AA + + + Parallel + AA + + + Perpendicular + AA + + + Projection + AA + + + Radius + AA + + + Rectangle + AA + + + Sketch + AA + + + Tangent + AA + + + Trim + AA + + + Vertical + AA + + + Vertical Distance + AA + + + @@ -2060,326 +2185,1560 @@ Sketch AA - - - SketchConstraintAngle - Angle + DoF (degrees of freedom) = 2 AA - Set fixed angle between two line segments + DoF (degrees of freedom) = 4 AA - - - SketchConstraintCoincidence - Coincident + DoF (degrees of freedom) = 5 AA - Create constraint for the coincidence of two points or point on line or circle + Sketch is fully fixed (DoF = 0) AA - SketchConstraintCollinear + Sketch:External - Collinear + Select a plane on which to create a sketch AA + + + Sketch:SketchPlugin_SolverErrorValidator - Create constraint defining collinearity of two lines + The constraint is conflicting with others. To fix this, you can either undo your operation or remove a conflicting constraint. AA + - SketchConstraintDistance + SketchConstraintAngle - Distance + Angle AA - Set fixed distance from a point to an object + Set fixed angle between two line segments AA - SketchConstraintDistanceHorizontal + SketchConstraintAngle:AngleType - Horizontal Distance + Additional AA - Set horizontal distance between two points + Angle type AA - - - SketchConstraintDistanceVertical - Set vertical distance between two points + Complementary AA - Vertical Distance + Direct AA - SketchConstraintEqual + SketchConstraintAngle:AngleValue - Create constraint defining equal lengths of two lines or line and arc or equal radii of two arcs or two circles or arc and circle + Angle AA - Equal + Value AA - SketchConstraintHorizontal + SketchConstraintAngle:ConstraintEntityA - Create constraint defining horizontal line + Line 1 AA - Horizontal + Select a line AA - SketchConstraintLength + SketchConstraintAngle:ConstraintEntityB - Length + Line 2 AA - Set fixed length of a line segment + Select a line AA - SketchConstraintMiddle + SketchConstraintAngle:LocationType - Create constraint for setting middle point on a line + Automatic AA - Middle point + Left AA - - - SketchConstraintMirror - Create constraint, mirroring group of objects + Right AA - Mirror copy + Text location AA - SketchConstraintParallel - - Create constraint defining two parallel lines - AA - + SketchConstraintAngle:Model_FeatureValidator - Parallel + Attribute "AngleReversedLine1" is not initialized. AA + - SketchConstraintPerpendicular + SketchConstraintCoincidence - Create constraint defining two orthogonal objects + Coincident AA - Perpendicular + Create constraint for the coincidence of two points or point on line or circle AA - SketchConstraintRadius + SketchConstraintCoincidence:ConstraintEntityA - Radius + First object AA - Set fixed radius of a circle or an arc + Select a first object AA - SketchConstraintRigid + SketchConstraintCoincidence:ConstraintEntityB - Fix an object + Second object AA - Fixed + Select a second object AA + - SketchConstraintTangent + SketchConstraintCollinear - Create constraint defining tangency of two segments with common coincident point + Collinear AA - Tangent + Create constraint defining collinearity of two lines AA - SketchConstraintVertical + SketchConstraintCollinear:ConstraintEntityA - Create constraint defining vertical line + First line AA - Vertical + Select a line AA - SketchDrawer - - Creates sketch using elements of selected shape belonging to selected plane - AA - + SketchConstraintCollinear:ConstraintEntityA:GeomValidators_ShapeType - Sketch drawer + The object is empty AA - SketchFillet + SketchConstraintCollinear:ConstraintEntityB - Create constraint defining fillet between two connected segments + Second line AA - Fillet + Select a line AA - SketchIntersectionPoint + SketchConstraintCollinear:ConstraintEntityB:GeomValidators_ShapeType - Intersect edge with sketch plane + The object is empty AA + + + SketchConstraintCollinear:Model_FeatureValidator - Intersection + Attribute "ConstraintEntityA" is not initialized. AA + - SketchLine + SketchConstraintDistance - Create line + Distance AA - Line + Set fixed distance from a point to an object AA - SketchMacroArc - - Arc - AA - + SketchConstraintDistance - Create arc + Select objects for distance definition. Following objects can be accepted: point, line or arc end point, center of circle or arc. AA - SketchMacroCircle + SketchConstraintDistance:ConstraintEntityA - Circle + First object AA - Create circle + Select point, line end point, line, center of circle or arc. AA - SketchMacroEllipse + SketchConstraintDistance:ConstraintEntityB - Create ellipse + Second object AA - Ellipse + Select point, line end point, line, center of circle or arc. AA - SketchMultiRotation + SketchConstraintDistance:ConstraintValue - Angular copy + Distance AA - Copy objects and rotate + Value AA - SketchMultiTranslation + SketchConstraintDistance:LocationType - Copy objects and move + Automatic AA - Linear copy + Left AA - - - SketchPoint - Create point + Right AA - Point + Text location AA - SketchProjection + SketchConstraintDistance:SignedDistance - Project feature onto sketch plane + Keep distance orientation AA - Projection + Keep orientation AA + - SketchRectangle + SketchConstraintDistanceHorizontal - Create rectangle + Horizontal Distance AA - Rectangle + Set horizontal distance between two points + AA + + + + SketchConstraintDistanceHorizontal + + Select points for distance definition. + AA + + + + SketchConstraintDistanceHorizontal:ConstraintEntityA + + First point + AA + + + Select point. + AA + + + + SketchConstraintDistanceHorizontal:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + AA + + + + SketchConstraintDistanceHorizontal:ConstraintEntityB + + Second point + AA + + + Select point. + AA + + + + SketchConstraintDistanceHorizontal:ConstraintEntityB:GeomValidators_ShapeType + + The object is empty + AA + + + + SketchConstraintDistanceHorizontal:DistanceValue + + Distance + AA + + + Value + AA + + + + SketchConstraintDistanceHorizontal:DistanceValue:GeomValidators_Positive + + Double is not initialized. + AA + + + + SketchConstraintDistanceHorizontal:LocationType + + Automatic + AA + + + Left + AA + + + Right + AA + + + Text location + AA + + + + SketchConstraintDistanceHorizontal:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + AA + + + + + SketchConstraintDistanceVertical + + Set vertical distance between two points + AA + + + Vertical Distance + AA + + + + SketchConstraintDistanceVertical + + Select points for distance definition. + AA + + + + SketchConstraintDistanceVertical:ConstraintEntityA + + First point + AA + + + Select point. + AA + + + + SketchConstraintDistanceVertical:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + AA + + + + SketchConstraintDistanceVertical:ConstraintEntityB + + Second point + AA + + + Select point. + AA + + + + SketchConstraintDistanceVertical:ConstraintEntityB:GeomValidators_ShapeType + + The object is empty + AA + + + + SketchConstraintDistanceVertical:DistanceValue + + Distance + AA + + + Value + AA + + + + SketchConstraintDistanceVertical:DistanceValue:GeomValidators_Positive + + Double is not initialized. + AA + + + + SketchConstraintDistanceVertical:LocationType + + Automatic + AA + + + Left + AA + + + Right + AA + + + Text location + AA + + + + SketchConstraintDistanceVertical:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + AA + + + + + SketchConstraintEqual + + Create constraint defining equal lengths of two lines or line and arc or equal radii of two arcs or two circles or arc and circle + AA + + + Equal + AA + + + + SketchConstraintEqual:ConstraintEntityA + + First object + AA + + + Select line, circle or arc + AA + + + + SketchConstraintEqual:ConstraintEntityB + + Second object + AA + + + Select line, circle or arc + AA + + + + + SketchConstraintHorizontal + + Create constraint defining horizontal line + AA + + + Horizontal + AA + + + + SketchConstraintHorizontal:ConstraintEntityA + + Line + AA + + + Select a line + AA + + + + + SketchConstraintLength + + Length + AA + + + Set fixed length of a line segment + AA + + + + SketchConstraintLength + + Select a line on which to calculate length + AA + + + + SketchConstraintLength:ConstraintEntityA + + Line + AA + + + Select a line + AA + + + + SketchConstraintLength:ConstraintValue + + Length + AA + + + Value + AA + + + + SketchConstraintLength:LocationType + + Automatic + AA + + + Left + AA + + + Right + AA + + + Text location + AA + + + + + SketchConstraintMiddle + + Create constraint for setting middle point on a line + AA + + + Middle point + AA + + + + SketchConstraintMiddle:ConstraintEntityA + + First object + AA + + + Select a first object + AA + + + + SketchConstraintMiddle:ConstraintEntityB + + Second object + AA + + + Select a second object + AA + + + + + SketchConstraintMirror + + Create constraint, mirroring group of objects + AA + + + Mirror copy + AA + + + + SketchConstraintMirror:ConstraintEntityA + + Mirror line + AA + + + Select mirror line + AA + + + + SketchConstraintMirror:ConstraintMirrorList + + Segments: + AA + + + Select list of objects to be mirrored + AA + + + + + SketchConstraintParallel + + Create constraint defining two parallel lines + AA + + + Parallel + AA + + + + SketchConstraintParallel:ConstraintEntityA + + First line + AA + + + Select a line + AA + + + + SketchConstraintParallel:ConstraintEntityB + + Second line + AA + + + Select a line + AA + + + + + SketchConstraintPerpendicular + + Create constraint defining two orthogonal objects + AA + + + Perpendicular + AA + + + + SketchConstraintPerpendicular:ConstraintEntityA + + First object + AA + + + Select line or arc + AA + + + + SketchConstraintPerpendicular:ConstraintEntityB + + Second object + AA + + + Select line or arc + AA + + + + + SketchConstraintRadius + + Radius + AA + + + Set fixed radius of a circle or an arc + AA + + + + SketchConstraintRadius + + Select a circle or an arc on which to calculate radius + AA + + + + SketchConstraintRadius:ConstraintEntityA + + Circle or Arc + AA + + + Select a circle or an arc + AA + + + + SketchConstraintRadius:ConstraintValue + + Radius + AA + + + Value + AA + + + + SketchConstraintRadius:LocationType + + Automatic + AA + + + Left + AA + + + Right + AA + + + Text location + AA + + + + + SketchConstraintRigid + + Fix an object + AA + + + Fixed + AA + + + + SketchConstraintRigid:ConstraintEntityA + + Object + AA + + + Select point, line end point, line, center of circle or arc. + AA + + + + + SketchConstraintTangent + + Create constraint defining tangency of two segments with common coincident point + AA + + + Tangent + AA + + + + SketchConstraintTangent:ConstraintEntityA + + First object + AA + + + Select line or arc + AA + + + + SketchConstraintTangent:ConstraintEntityB + + Second object + AA + + + Select line or arc + AA + + + + + SketchConstraintVertical + + Create constraint defining vertical line + AA + + + Vertical + AA + + + + SketchConstraintVertical:ConstraintEntityA + + Line + AA + + + Select a line + AA + + + + + + SketchDrawer + + Creates sketch using elements of selected shape belonging to selected plane + AA + + + Sketch drawer + AA + + + + SketchDrawer:Model_FeatureValidator + + Attribute "base_shape" is not initialized. + AA + + + + SketchDrawer:add_dimensions + + Create dimensions + AA + + + To add dimensions into created sketch + AA + + + + SketchDrawer:base_shape + + Select a shape for extraction to sketch. + AA + + + Shape: + AA + + + + SketchDrawer:plane + + Plane: + AA + + + Select plane for sketch + AA + + + + + SketchFillet + + Create constraint defining fillet between two connected segments + AA + + + Fillet + AA + + + + SketchFillet:Model_FeatureValidator + + Attribute "fillet_point" is not initialized. + AA + + + + SketchFillet:fillet_point + + Point + AA + + + Select point for fillet (should be shared by two entities only) + AA + + + + SketchFillet:fillet_point:SketchPlugin_FilletVertexValidator + + Error: Bad point selected. + AA + + + Error: Edges in selected point has tangent constraint. + AA + + + + + SketchIntersectionPoint + + Intersect edge with sketch plane + AA + + + Intersection + AA + + + + SketchIntersectionPoint:ExternalFeature + + Object + AA + + + Select external edge. + AA + + + + SketchIntersectionPoint:ExternalFeature:SketchPlugin_IntersectionValidator + + The attribute %1 should be an edge + AA + + + + SketchIntersectionPoint:IncludeToResult + + Include into the sketch result + AA + + + Include projected feature into the sketch result + AA + + + + SketchIntersectionPoint:Model_FeatureValidator + + Attribute "ExternalFeature" is not initialized. + AA + + + + + SketchLine + + Create line + AA + + + Line + AA + + + + SketchLine:Auxiliary + + Auxiliary + AA + + + Construction element + AA + + + + SketchLine:LineLength + + Length: + AA + + + Line length + AA + + + + + SketchMacroArc + + Arc + AA + + + Create arc + AA + + + + SketchMacroArc:Auxiliary + + Auxiliary + AA + + + Construction element + AA + + + + SketchMacroArc:Model_FeatureValidator + + Attribute "center_point" is not initialized. + AA + + + Attribute "end_point_1" is not initialized. + AA + + + Attribute "end_point_2" is not initialized. + AA + + + Attribute "end_point_3" is not initialized. + AA + + + + SketchMacroArc:angle + + Angle: + AA + + + Set angle + AA + + + + SketchMacroArc:arc_type + + Center and two points + AA + + + Perpendicular to line + AA + + + Tangent with edge + AA + + + Three points on arc + AA + + + + SketchMacroArc:passed_point:SketchPlugin_ThirdPointValidator + + Selected points are on the same line + AA + + + + SketchMacroArc:radius + + Radius: + AA + + + Set radius + AA + + + + SketchMacroArc:tangent_point + + Select point on line + AA + + + Tangent point + AA + + + Transversal point + AA + + + + SketchMacroArc:tangent_point:SketchPlugin_ArcTangentPoint + + The attribute %1 should be a point + AA + + + + SketchMacroArc:tangent_point:SketchPlugin_ArcTransversalPoint + + The attribute %1 should be a point + AA + + + + + SketchMacroCircle + + Circle + AA + + + Create circle + AA + + + + SketchMacroCircle:Auxiliary + + Auxiliary + AA + + + Construction element + AA + + + + SketchMacroCircle:Model_FeatureValidator + + Attribute "center_point" is not initialized. + AA + + + Attribute "first_point" is not initialized. + AA + + + Attribute "passed_point" is not initialized. + AA + + + + SketchMacroCircle:circle_radius + + Radius: + AA + + + Set radius + AA + + + + SketchMacroCircle:circle_radius:GeomValidators_Positive + + Value is too small. + AA + + + + SketchMacroCircle:circle_type + + Center and passed points + AA + + + Three points + AA + + + + SketchMacroCircle:third_point:SketchPlugin_ThirdPointValidator + + Selected points are on the same line + AA + + + + + SketchMacroEllipse + + Create ellipse + AA + + + Ellipse + AA + + + + SketchMacroEllipse:Auxiliary + + Auxiliary + AA + + + Construction element + AA + + + + SketchMacroEllipse:Model_FeatureValidator + + Attribute "first_point" is not initialized. + AA + + + Attribute "passed_point" is not initialized. + AA + + + + SketchMacroEllipse:ellipse_type + + Center, major semi-axis and passing point + AA + + + Major axis and passing point + AA + + + + SketchMacroEllipse:major_radius + + Major radius: + AA + + + Set major radius + AA + + + + SketchMacroEllipse:major_radius:GeomValidators_Positive + + Double is not initialized. + AA + + + + SketchMacroEllipse:minor_radius + + Minor radius: + AA + + + Set minor radius + AA + + + + SketchMacroEllipse:minor_radius:GeomValidators_Positive + + Double is not initialized. + AA + + + + + SketchMultiRotation + + Angular copy + AA + + + Copy objects and rotate + AA + + + + SketchMultiRotation:AngleType + + Full angle + AA + + + Single angle + AA + + + + SketchMultiRotation:MultiRotationAngle + + Angle + AA + + + Rotation angle + AA + + + + SketchMultiRotation:MultiRotationCenter + + Center of rotation + AA + + + + SketchMultiRotation:MultiRotationList + + Segments: + AA + + + Select list of objects to be rotated + AA + + + + SketchMultiRotation:MultiRotationObjects + + Total number of objects + AA + + + + SketchMultiRotation:MultiRotationReversed + + Reverse angular copy + AA + + + Reversed + AA + + + + + SketchMultiTranslation + + Copy objects and move + AA + + + Linear copy + AA + + + + SketchMultiTranslation:MultiTranslationEndPoint + + End point + AA + + + Final point of translation + AA + + + + SketchMultiTranslation:MultiTranslationList + + Segments: + AA + + + Select list of objects to be translated + AA + + + + SketchMultiTranslation:MultiTranslationObjects + + Total number of objects AA + + SketchMultiTranslation:MultiTranslationStartPoint + + Start point + AA + + + Start point of translation + AA + + + + SketchMultiTranslation:ValueType + + Full value + AA + + + Single value + AA + + + + + SketchPoint + + Create point + AA + + + Point + AA + + + + SketchPoint:Auxiliary + + Auxiliary + AA + + + Construction element + AA + + + + + SketchProjection + + Project feature onto sketch plane + AA + + + Projection + AA + + + + SketchProjection:ExternalFeature + + Object + AA + + + Select external edge or vertex. + AA + + + + SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator + + The attribute %1 should be an edge or vertex + AA + + + + SketchProjection:IncludeToResult + + Include into the sketch result + AA + + + Include projected feature into the sketch result + AA + + + + + SketchRectangle + + Create rectangle + AA + + + Rectangle + AA + + + + SketchRectangle:Auxiliary + + Auxiliary + AA + + + Construction element + AA + + + SketchSplit @@ -2391,6 +3750,32 @@ AA + + SketchSplit:Model_FeatureValidator + + Attribute "SelectedObject" is not initialized. + AA + + + + SketchSplit:SelectedObject + + Segment + AA + + + Select segment for split + AA + + + + SketchSplit:SelectedObject:SketchPlugin_SplitValidator + + Unknown error. + AA + + + SketchTrim @@ -2402,5 +3787,30 @@ AA + + SketchTrim:Model_FeatureValidator + + Attribute "SelectedObject" is not initialized. + AA + + + + SketchTrim:SelectedObject + + Segment + AA + + + Select segment for trim + AA + + + + SketchTrim:SelectedObject:SketchPlugin_TrimValidator + + Unknown error. + AA + +