From: azv Date: Mon, 20 Mar 2017 12:52:04 +0000 (+0300) Subject: Adjust Model test cases according to new behavior of Tangent constraint. X-Git-Tag: V_2.7.0~211 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=96d8ab54a684bbef10d78d5448fd060dc2f7dff7;p=modules%2Fshaper.git Adjust Model test cases according to new behavior of Tangent constraint. --- diff --git a/src/FeaturesPlugin/Test/Test1942.py b/src/FeaturesPlugin/Test/Test1942.py index 110f62e7e..006c614c1 100644 --- a/src/FeaturesPlugin/Test/Test1942.py +++ b/src/FeaturesPlugin/Test/Test1942.py @@ -66,6 +66,7 @@ SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_2.startPoint( SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_14") SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 30) SketchArc_2 = Sketch_1.addArc(-8.152231059872202, 11.25015706261054, -38.72043789437247, 5.632510332222703, -20.37351638704503, 39.82660556161157, True) +SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 30) SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_2.endPoint()) SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_15") SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result()) diff --git a/test.models/angle30.py b/test.models/angle30.py index d91bec07c..2bfbcb9f2 100644 --- a/test.models/angle30.py +++ b/test.models/angle30.py @@ -754,8 +754,8 @@ model.testNbResults(Boolean_7, 1) model.testNbSubResults(Boolean_7, [0]) model.testNbSubShapes(Boolean_7, GeomAPI_Shape.SOLID, [1]) model.testNbSubShapes(Boolean_7, GeomAPI_Shape.FACE, [49]) -model.testNbSubShapes(Boolean_7, GeomAPI_Shape.EDGE, [271]) -model.testNbSubShapes(Boolean_7, GeomAPI_Shape.VERTEX, [542]) -model.testResultsVolumes(Boolean_7, [157000.318686960934428498148918152]) +model.testNbSubShapes(Boolean_7, GeomAPI_Shape.EDGE, [263]) +model.testNbSubShapes(Boolean_7, GeomAPI_Shape.VERTEX, [526]) +model.testResultsVolumes(Boolean_7, [157000.328896829247241839766502380]) assert(model.checkPythonDump) diff --git a/test.models/bearing_puller.py b/test.models/bearing_puller.py index 05c20e231..99b36f6b4 100644 --- a/test.models/bearing_puller.py +++ b/test.models/bearing_puller.py @@ -14,6 +14,7 @@ model.addParameter(Part_1_doc, "Radius", "50", "Radius of the body") model.addParameter(Part_1_doc, "Width", "25", "Width of body arms") Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) SketchLine_1 = Sketch_1.addLine(50, 14.61148285474187, 50, 0) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14.61148285474187) SketchLine_2 = Sketch_1.addLine(50, 0, 6, 0) SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) SketchLine_3 = Sketch_1.addLine(7, 25, 16.13599978860571, 25) @@ -341,8 +342,6 @@ SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchArc_13.startPoint( SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_48") SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchArc_13.endPoint(), SketchArc_12.endPoint()) SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_49") -SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchArc_13.center(), SketchLine_32.result()) -SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_50") SketchConstraintMirror_1 = Sketch_4.addMirror(SketchLine_40.result(), [SketchArc_13.results()[1], SketchArc_12.results()[1]]) [SketchArc_14, SketchArc_15] = SketchConstraintMirror_1.mirrored() SketchArc_15.setName("SketchArc_6") @@ -582,12 +581,10 @@ SketchArc_22 = Sketch_6.addArc(3.457737973711348, 3.788069295318559e-014, 6.25, SketchArc_22.setName("SketchArc_4") SketchArc_22.result().setName("SketchArc_4") SketchArc_22.results()[1].setName("SketchArc_4_2") -SketchConstraintCoincidence_117 = Sketch_6.setCoincident(SketchArc_22.startPoint(), SketchLine_56.startPoint()) -SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_48") -SketchConstraintCoincidence_118 = Sketch_6.setCoincident(SketchArc_22.endPoint(), SketchArc_21.endPoint()) -SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_49") -SketchConstraintCoincidence_119 = Sketch_6.setCoincident(SketchArc_22.center(), SketchLine_53.result()) -SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_50") +SketchConstraintCoincidence_127 = Sketch_6.setCoincident(SketchArc_22.startPoint(), SketchLine_56.startPoint()) +SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_48") +SketchConstraintCoincidence_128 = Sketch_6.setCoincident(SketchArc_22.endPoint(), SketchArc_21.endPoint()) +SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_49") SketchConstraintMirror_3 = Sketch_6.addMirror(SketchLine_61.result(), [SketchArc_22.results()[1], SketchArc_21.results()[1]]) [SketchArc_23, SketchArc_24] = SketchConstraintMirror_3.mirrored() SketchArc_24.setName("SketchArc_6") @@ -831,8 +828,6 @@ SketchConstraintCoincidence_194 = Sketch_8.setCoincident(SketchArc_31.startPoint SketchConstraintCoincidence_194.setName("SketchConstraintCoincidence_48") SketchConstraintCoincidence_195 = Sketch_8.setCoincident(SketchArc_31.endPoint(), SketchArc_30.endPoint()) SketchConstraintCoincidence_195.setName("SketchConstraintCoincidence_49") -SketchConstraintCoincidence_196 = Sketch_8.setCoincident(SketchArc_31.center(), SketchLine_74.result()) -SketchConstraintCoincidence_196.setName("SketchConstraintCoincidence_50") SketchConstraintMirror_5 = Sketch_8.addMirror(SketchLine_82.result(), [SketchArc_31.results()[1], SketchArc_30.results()[1]]) [SketchArc_32, SketchArc_33] = SketchConstraintMirror_5.mirrored() SketchArc_33.setName("SketchArc_6") @@ -1074,7 +1069,7 @@ model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [1]) model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [52]) model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [338]) model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [676]) -model.testResultsVolumes(Part_1, [48835.415011945384321734309196472]) +model.testResultsVolumes(Part_1, [48835.437112214101944118738174438]) model.testNbResults(Translation_4, 3) model.testNbSubResults(Translation_4, [0, 0, 0]) diff --git a/test.models/case24.py b/test.models/case24.py index 1d46a8404..65afa9b00 100644 --- a/test.models/case24.py +++ b/test.models/case24.py @@ -278,8 +278,6 @@ SketchConstraintRadius_6 = Sketch_5.setRadius(SketchArc_6.results()[1], 8) SketchConstraintRadius_6.setName("SketchConstraintRadius_7") SketchConstraintDistance_14 = Sketch_5.setDistance(SketchLine_33.endPoint(), SketchLine_30.result(), 20) SketchConstraintDistance_14.setName("SketchConstraintDistance_17") -SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_34.endPoint(), SketchLine_34.result()) -SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_65") SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchLine_34.endPoint(), SketchLine_37.startPoint()) SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_66") SketchConstraintDistance_15 = Sketch_5.setDistance(SketchLine_37.startPoint(), SketchLine_30.result(), "DBody") @@ -388,8 +386,6 @@ SketchConstraintCoincidence_81 = Sketch_6.setCoincident(SketchLine_38.startPoint SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_153") SketchConstraintCoincidence_82 = Sketch_6.setCoincident(SketchLine_40.endPoint(), SketchLine_39.startPoint()) SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_154") -SketchConstraintCoincidence_83 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchLine_41.result()) -SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_155") SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchLine_39.endPoint()) SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_156") model.do() @@ -416,7 +412,7 @@ SketchLine_54.result().setName("SketchLine_55") SketchLine_54.setAuxiliary(True) SketchConstraintCoincidence_86 = Sketch_7.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint()) SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_96") -SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_17&RevolutionFuse_3_1/Modfied_10")) +SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_13&RevolutionFuse_3_1/Modfied_10")) SketchLine_55.setName("SketchLine_56") SketchLine_55.result().setName("SketchLine_56") SketchConstraintCoincidence_87 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result()) @@ -631,7 +627,7 @@ Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY")) SketchLine_77 = Sketch_10.addLine(64, 20, 89, 20) SketchLine_77.setName("SketchLine_76") SketchLine_77.result().setName("SketchLine_76") -SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_2_1/Modfied_11&RevolutionFuse_2_1/Modfied_13&RevolutionFuse_3_1/Modfied_13&RevolutionFuse_3_1/Modfied_2")) +SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_2_1/Modfied_11&RevolutionFuse_2_1/Modfied_13&RevolutionFuse_3_1/Modfied_15&RevolutionFuse_3_1/Modfied_4")) SketchConstraintCoincidence_122 = Sketch_10.setCoincident(SketchLine_77.startPoint(), SketchPoint_4.result()) SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_120") SketchPoint_5 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_8e-SketchLine_4e")) @@ -640,10 +636,10 @@ SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_121") SketchLine_78 = Sketch_10.addLine(64, -20, 89, -20) SketchLine_78.setName("SketchLine_77") SketchLine_78.result().setName("SketchLine_77") -SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_1_1/Modfied_4&RevolutionFuse_1_1/Modfied_9&RevolutionFuse_3_1/Modfied_15&RevolutionFuse_3_1/Modfied_6")) +SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_1_1/Modfied_4&RevolutionFuse_1_1/Modfied_9&RevolutionFuse_3_1/Modfied_17&RevolutionFuse_3_1/Modfied_8")) SketchConstraintCoincidence_124 = Sketch_10.setCoincident(SketchLine_78.startPoint(), SketchPoint_6.result()) SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_122") -SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_2&RevolutionFuse_1_1/Modfied_4&ExtrusionFuse_2_1/Modfied_1&RevolutionFuse_3_1/Modfied_15")) +SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_2&RevolutionFuse_1_1/Modfied_4&ExtrusionFuse_2_1/Modfied_1&RevolutionFuse_3_1/Modfied_17")) SketchConstraintCoincidence_125 = Sketch_10.setCoincident(SketchLine_78.endPoint(), SketchPoint_7.result()) SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_123") SketchArc_10 = Sketch_10.addArc(89.00000104846708, 1.669244441022778e-015, 89, -20, 89, 20, False) @@ -666,7 +662,7 @@ SketchConstraintCoincidence_129 = Sketch_10.setCoincident(SketchArc_11.startPoin SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_127") SketchConstraintTangent_19 = Sketch_10.setTangent(SketchArc_11.results()[1], SketchLine_78.result()) SketchConstraintTangent_19.setName("SketchConstraintTangent_24") -SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_7&RevolutionFuse_3_1/Modfied_6&RevolutionFuse_3_1/Modfied_24&RevolutionFuse_3_1/Modfied_5")) +SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_9&RevolutionFuse_3_1/Modfied_7&RevolutionFuse_3_1/Modfied_8&RevolutionFuse_3_1/Modfied_24&RevolutionFuse_3_1/Modfied_9")) SketchConstraintCoincidence_130 = Sketch_10.setCoincident(SketchArc_11.endPoint(), SketchPoint_8.result()) SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_128") SketchArc_12 = Sketch_10.addArc(64.00001789135865, 23.01137360115889, 64, 20, 61.15622559702543, 22.02080994708722, True) @@ -677,7 +673,7 @@ SketchConstraintCoincidence_131 = Sketch_10.setCoincident(SketchArc_12.startPoin SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_129") SketchConstraintTangent_20 = Sketch_10.setTangent(SketchArc_12.results()[1], SketchLine_77.result()) SketchConstraintTangent_20.setName("SketchConstraintTangent_25") -SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_3&RevolutionFuse_3_1/Modfied_2&RevolutionFuse_3_1/Modfied_24&RevolutionFuse_3_1/Modfied_1")) +SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_9&RevolutionFuse_3_1/Modfied_3&RevolutionFuse_3_1/Modfied_4&RevolutionFuse_3_1/Modfied_24&RevolutionFuse_3_1/Modfied_5")) SketchConstraintCoincidence_132 = Sketch_10.setCoincident(SketchArc_12.endPoint(), SketchPoint_9.result()) SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_130") SketchLine_79 = Sketch_10.addLine(61.15622559702543, 22.02080994708722, 59.81204392543111, 22.0208099470871) @@ -775,8 +771,8 @@ model.testNbResults(ExtrusionCut_4, 1) model.testNbSubResults(ExtrusionCut_4, [0]) model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.SOLID, [1]) model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.FACE, [81]) -model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.EDGE, [418]) -model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.VERTEX, [836]) -model.testResultsVolumes(ExtrusionCut_4, [502902.415176195616368204355239868]) +model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.EDGE, [406]) +model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.VERTEX, [812]) +model.testResultsVolumes(ExtrusionCut_4, [502902.431481667619664222002029419]) assert(model.checkPythonDump()) diff --git a/test.models/ecran.py b/test.models/ecran.py index 1c2fdc519..6e09d950e 100644 --- a/test.models/ecran.py +++ b/test.models/ecran.py @@ -8,7 +8,7 @@ Part_1 = model.addPart(partSet) Part_1_doc = Part_1.document() Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) SketchLine_1 = Sketch_1.addLine(55.1, 10.3, 55.1, 0.3) -SketchLine_2 = Sketch_1.addLine(55.1, 0.3, 2.300000098190561, 0.3) +SketchLine_2 = Sketch_1.addLine(55.1, 0.3, 2.3, 0.3) SketchLine_2.setName("SketchLine_10") SketchLine_2.result().setName("SketchLine_10") SketchLine_3 = Sketch_1.addLine(55.1, 0.3, 0.3, 0.3) @@ -16,10 +16,10 @@ SketchLine_3.setName("SketchLine_2") SketchLine_3.result().setName("SketchLine_2") SketchLine_3.setAuxiliary(True) SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint()) -SketchLine_4 = Sketch_1.addLine(0.3, 2.299999958617008, 0.3, 10.3) +SketchLine_4 = Sketch_1.addLine(0.3, 2.3, 0.3, 10.3) SketchLine_4.setName("SketchLine_11") SketchLine_4.result().setName("SketchLine_11") -SketchLine_5 = Sketch_1.addLine(2.299981065494142, -1.390467145968888e-034, 55.4, -3.349267313974575e-033) +SketchLine_5 = Sketch_1.addLine(2.3, 0, 55.4, 0) SketchLine_5.setName("SketchLine_12") SketchLine_5.result().setName("SketchLine_12") SketchLine_6 = Sketch_1.addLine(0.3, 0.3, 0.3, 10.3) @@ -27,7 +27,7 @@ SketchLine_6.setName("SketchLine_3") SketchLine_6.result().setName("SketchLine_3") SketchLine_6.setAuxiliary(True) SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_6.startPoint()) -SketchLine_7 = Sketch_1.addLine(0, 10.3, 0, 2.300013086422291) +SketchLine_7 = Sketch_1.addLine(0, 10.3, 0, 2.3) SketchLine_7.setName("SketchLine_13") SketchLine_7.result().setName("SketchLine_13") SketchLine_8 = Sketch_1.addLine(0.3, 10.3, 0, 10.3) @@ -38,17 +38,17 @@ SketchLine_9 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ")) SketchLine_9.setName("SketchLine_5") SketchLine_9.result().setName("SketchLine_5") SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.result()) -SketchLine_10 = Sketch_1.addLine(0, 10.3, 0, -3.349267313974575e-033) +SketchLine_10 = Sketch_1.addLine(0, 10.3, 0, 0) SketchLine_10.setName("SketchLine_6") SketchLine_10.result().setName("SketchLine_6") SketchLine_10.setAuxiliary(True) SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint()) -SketchLine_11 = Sketch_1.addLine(0, -3.349267313974575e-033, 55.4, -3.349267313974575e-033) +SketchLine_11 = Sketch_1.addLine(0, 0, 55.4, 0) SketchLine_11.setName("SketchLine_7") SketchLine_11.result().setName("SketchLine_7") SketchLine_11.setAuxiliary(True) SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint()) -SketchLine_12 = Sketch_1.addLine(55.4, -3.349267313974575e-033, 55.4, 10.3) +SketchLine_12 = Sketch_1.addLine(55.4, 0, 55.4, 10.3) SketchLine_12.setName("SketchLine_8") SketchLine_12.result().setName("SketchLine_8") SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint()) @@ -72,7 +72,7 @@ SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_11.result(), 55.4) SketchConstraintLength_3.setName("SketchConstraintLength_5") SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_10.result()) SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 0.3) -SketchArc_1 = Sketch_1.addArc(2.3, 2.3, 0.3, 2.299999958617008, 2.300000098190561, 0.3, False) +SketchArc_1 = Sketch_1.addArc(2.3, 2.3, 0.3, 2.3, 2.3, 0.3, False) SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_4.startPoint()) SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.endPoint()) SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_2.result()) @@ -81,7 +81,7 @@ SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_3.startPoint( SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_4.endPoint()) SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.result()) SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_6.result()) -SketchArc_2 = Sketch_1.addArc(2.3, 2.3, 0, 2.300013086422291, 2.299981065494142, -1.390467145968888e-034, False) +SketchArc_2 = Sketch_1.addArc(2.3, 2.3, 0, 2.3, 2.3, 0, False) SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_7.endPoint()) SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_5.startPoint()) SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_5.result()) @@ -97,12 +97,12 @@ model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.") Extrusion_1.setName("Profil") Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7")) -SketchLine_14 = Sketch_2.addLine(149.5, -2.299981065494, 153.5, -2.299981065494142) +SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3) SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1")) SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_1.result()) -SketchLine_15 = Sketch_2.addLine(153.5, -2.299981065494142, 153.5, 7.700018934505839) -SketchLine_16 = Sketch_2.addLine(153.5, 7.700018934505839, 149.5, 7.700018934505839) -SketchLine_17 = Sketch_2.addLine(149.5, 7.700018934505839, 149.5, -2.299981065494) +SketchLine_15 = Sketch_2.addLine(153.5, -2.3, 153.5, 7.7) +SketchLine_16 = Sketch_2.addLine(153.5, 7.7, 149.5, 7.7) +SketchLine_17 = Sketch_2.addLine(149.5, 7.7, 149.5, -2.3) SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_14.startPoint()) SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint()) SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint()) @@ -111,10 +111,10 @@ SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_14.result()) SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_15.result()) SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_16.result()) SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_17.result()) -SketchLine_18 = Sketch_2.addLine(-149.5, -2.299981065494142, -153.5, -2.299981065494142) -SketchLine_19 = Sketch_2.addLine(-153.5, -2.299981065494142, -153.5, 7.700018934505858) -SketchLine_20 = Sketch_2.addLine(-153.5, 7.700018934505858, -149.5, 7.700018934505858) -SketchLine_21 = Sketch_2.addLine(-149.5, 7.700018934505858, -149.5, -2.299981065494142) +SketchLine_18 = Sketch_2.addLine(-149.5, -2.3142, -153.5, -2.3142) +SketchLine_19 = Sketch_2.addLine(-153.5, -2.3142, -153.5, 7.7) +SketchLine_20 = Sketch_2.addLine(-153.5, 7.7, -149.5, 7.7) +SketchLine_21 = Sketch_2.addLine(-149.5, 7.7, -149.5, -2.3142) SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchLine_18.startPoint()) SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint()) SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint()) @@ -137,7 +137,7 @@ model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) ExtrusionCut_1.setName("Decoupe_Angle") Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8")) -SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.300000000000011) +SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3) SketchLine_22.setName("SketchLine_29") SketchLine_22.result().setName("SketchLine_29") SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8")) @@ -150,7 +150,7 @@ SketchLine_23.setName("SketchLine_30") SketchLine_23.result().setName("SketchLine_30") SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.result()) SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_41") -SketchLine_24 = Sketch_3.addLine(153.5, -8.300000000000011, 151.5, -10.3) +SketchLine_24 = Sketch_3.addLine(153.5, -8.3, 151.5, -10.3) SketchLine_24.setName("SketchLine_31") SketchLine_24.result().setName("SketchLine_31") SketchConstraintCoincidence_37 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_24.startPoint()) @@ -183,21 +183,21 @@ Sketch_3.setName("Sketch_4") Sketch_3.result().setName("Sketch_4") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_2.setName("Chamfrein_1") -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_6")) -SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.300000000000003) +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_7")) +SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3) SketchLine_30.setName("SketchLine_35") SketchLine_30.result().setName("SketchLine_35") -SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_10&ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_5")) +SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7&ExtrusionCut_1_1/Modfied_6")) SketchPoint_4.setName("SketchPoint_6") SketchPoint_4.result().setName("SketchPoint_6") SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchPoint_4.result()) SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43") -SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_10&ExtrusionCut_1_1/Modfied_6")) +SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7")) SketchLine_31.setName("SketchLine_36") SketchLine_31.result().setName("SketchLine_36") SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result()) SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_48") -SketchLine_32 = Sketch_4.addLine(-149.5, 8.300000000000003, -147.5, 10.3) +SketchLine_32 = Sketch_4.addLine(-149.5, 8.3, -147.5, 10.3) SketchLine_32.setName("SketchLine_37") SketchLine_32.result().setName("SketchLine_37") SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_32.startPoint()) @@ -267,15 +267,15 @@ SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_59") model.do() Sketch_4.setName("Sketch_5") Sketch_4.result().setName("Sketch_5") -ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) -Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_8")) +ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_9")) SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714) SketchLine_40.setName("SketchLine_58") SketchLine_40.result().setName("SketchLine_58") SketchLine_41 = Sketch_5.addLine(152.2999838292651, -45.04999053274704, 153.5, -45.04999053274702) SketchLine_41.setName("SketchLine_57") SketchLine_41.result().setName("SketchLine_57") -SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_8")) +SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_9")) SketchLine_42.setName("SketchLine_46") SketchLine_42.result().setName("SketchLine_46") SketchLine_43 = Sketch_5.addLine(150.8, -45.04999053274702, 153.5, -45.04999053274702) @@ -287,7 +287,7 @@ SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_60") SketchLine_44 = Sketch_5.addLine(153.5, -45.04999053274702, 153.5, -37.04999053274702) SketchLine_44.setName("SketchLine_47") SketchLine_44.result().setName("SketchLine_47") -SketchLine_45 = Sketch_5.addLine(150.8000000000001, -14.54997391609652, 150.8000000000001, -19.54999029833178) +SketchLine_45 = Sketch_5.addLine(150.8, -14.54997391609652, 150.8, -19.54999029833178) SketchLine_45.setName("SketchLine_61") SketchLine_45.result().setName("SketchLine_61") SketchLine_46 = Sketch_5.addLine(153.5, -13.04999053274714, 152.2999838654776, -13.04999053274697) @@ -314,10 +314,10 @@ SketchConstraintVertical_10 = Sketch_5.setVertical(SketchLine_47.result()) SketchLine_49 = Sketch_5.addLine(153.5, -37.04999053274702, 152.2999989299055, -37.04999053274738) SketchLine_49.setName("SketchLine_62") SketchLine_49.result().setName("SketchLine_62") -SketchLine_50 = Sketch_5.addLine(150.8, -38.54997391988981, 150.8000000000001, -43.54998998548124) +SketchLine_50 = Sketch_5.addLine(150.8, -38.54997391988981, 150.8, -43.54998998548124) SketchLine_50.setName("SketchLine_63") SketchLine_50.result().setName("SketchLine_63") -SketchLine_51 = Sketch_5.addLine(150.7999999999999, -21.04999053274714, 153.5, -21.04999053274714) +SketchLine_51 = Sketch_5.addLine(150.8, -21.04999053274714, 153.5, -21.04999053274714) SketchLine_51.setName("SketchLine_50") SketchLine_51.result().setName("SketchLine_50") SketchLine_51.setAuxiliary(True) @@ -326,13 +326,13 @@ SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_65") SketchLine_52 = Sketch_5.addLine(153.5, -21.04999053274714, 153.5, -13.04999053274714) SketchLine_52.setName("SketchLine_51") SketchLine_52.result().setName("SketchLine_51") -SketchLine_53 = Sketch_5.addLine(150.7999999999999, -13.04999053274714, 150.7999999999999, -21.04999053274714) +SketchLine_53 = Sketch_5.addLine(150.8, -13.04999053274714, 150.8, -21.04999053274714) SketchLine_53.setAuxiliary(True) SketchConstraintCoincidence_61 = Sketch_5.setCoincident(SketchLine_53.endPoint(), SketchLine_51.startPoint()) SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_66") SketchConstraintCoincidence_62 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_52.startPoint()) SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_67") -SketchLine_54 = Sketch_5.addLine(153.5, -13.04999053274714, 150.7999999999999, -13.04999053274714) +SketchLine_54 = Sketch_5.addLine(153.5, -13.04999053274714, 150.8, -13.04999053274714) SketchLine_54.setName("SketchLine_52") SketchLine_54.result().setName("SketchLine_52") SketchLine_54.setAuxiliary(True) @@ -361,16 +361,16 @@ SketchLine_55.result().setName("SketchLine_54") SketchLine_55.setAuxiliary(True) SketchConstraintCoincidence_66 = Sketch_5.setCoincident(SketchPoint_5.coordinates(), SketchLine_55.startPoint()) SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_71") -SketchLine_56 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_1_1/Modfied_8")) +SketchLine_56 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_1_1/Modfied_9")) SketchLine_56.setName("SketchLine_55") SketchLine_56.result().setName("SketchLine_55") SketchConstraintCoincidence_67 = Sketch_5.setCoincident(SketchLine_55.endPoint(), SketchLine_56.result()) SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_72") SketchConstraintHorizontal_15 = Sketch_5.setHorizontal(SketchLine_55.result()) -SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_48.result(), SketchPoint_5.coordinates(), 8.199999999999999) +SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_48.result(), SketchPoint_5.coordinates(), 8.2) SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_51.result(), SketchPoint_5.coordinates(), 7.8) -SketchArc_3 = Sketch_5.addArc(152.3, -43.54999053274682, 150.8000000000001, -43.54998998548124, 152.2999838292651, -45.04999053274704, False) -SketchLine_57 = Sketch_5.addLine(150.8, -37.04999053274702, 150.8000000000001, -43.54998998548124) +SketchArc_3 = Sketch_5.addArc(152.3, -43.54999053274682, 150.8, -43.54998998548124, 152.2999838292651, -45.04999053274704, False) +SketchLine_57 = Sketch_5.addLine(150.8, -37.04999053274702, 150.8, -43.54998998548124) SketchLine_57.setName("SketchLine_56") SketchLine_57.result().setName("SketchLine_56") SketchLine_57.setAuxiliary(True) @@ -388,8 +388,8 @@ SketchConstraintCoincidence_72 = Sketch_5.setCoincident(SketchLine_57.endPoint() SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_77") SketchConstraintCoincidence_73 = Sketch_5.setCoincident(SketchLine_41.startPoint(), SketchLine_43.result()) SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_78") -SketchArc_4 = Sketch_5.addArc(152.3, -19.54999053274696, 150.8000000000001, -19.54999029833178, 152.2999838762584, -21.04999053274691, False) -SketchLine_58 = Sketch_5.addLine(150.7999999999999, -13.04999053274714, 150.8000000000001, -19.54999029833178) +SketchArc_4 = Sketch_5.addArc(152.3, -19.54999053274696, 150.8, -19.54999029833178, 152.2999838762584, -21.04999053274691, False) +SketchLine_58 = Sketch_5.addLine(150.8, -13.04999053274714, 150.8, -19.54999029833178) SketchLine_58.setName("SketchLine_59") SketchLine_58.result().setName("SketchLine_59") SketchLine_58.setAuxiliary(True) @@ -407,7 +407,7 @@ SketchConstraintCoincidence_78 = Sketch_5.setCoincident(SketchLine_40.startPoint SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_83") SketchConstraintCoincidence_79 = Sketch_5.setCoincident(SketchLine_58.endPoint(), SketchLine_53.result()) SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_84") -SketchArc_5 = Sketch_5.addArc(152.2999999999999, -14.54999053274707, 152.2999838654776, -13.04999053274697, 150.8000000000001, -14.54997391609652, False) +SketchArc_5 = Sketch_5.addArc(152.3, -14.54999053274707, 152.2999838654776, -13.04999053274697, 150.8, -14.54997391609652, False) SketchConstraintCoincidence_80 = Sketch_5.setCoincident(SketchArc_5.startPoint(), SketchLine_46.endPoint()) SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_85") SketchConstraintCoincidence_81 = Sketch_5.setCoincident(SketchArc_5.endPoint(), SketchLine_45.startPoint()) @@ -485,25 +485,25 @@ SketchLine_68.result().setName("SketchLine_73") model.do() Sketch_5.setName("Sketch_6") Sketch_5.result().setName("Sketch_6") -ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")]) Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_1")) -SketchArc_11 = Sketch_6.addArc(44.88999999999999, -23.54999053274703, 43.88999999999999, -23.54999053274703, 44.88999999999999, -22.54999053274703, False) -SketchArc_12 = Sketch_6.addArc(44.88999999999999, -13.54999053274703, 44.88999999999999, -14.54999053274703, 43.88999999999999, -13.54999053274703, False) +SketchArc_11 = Sketch_6.addArc(44.89, -23.54999053274703, 43.89, -23.54999053274703, 44.89, -22.54999053274703, False) +SketchArc_12 = Sketch_6.addArc(44.89, -13.54999053274703, 44.89, -14.54999053274703, 43.89, -13.54999053274703, False) SketchArc_13 = Sketch_6.addArc(5.89, -13.54999053274703, 6.89, -13.54999053274703, 5.89, -14.54999053274703, False) SketchArc_13.setName("SketchArc_14") SketchArc_13.result().setName("SketchArc_14") SketchArc_13.results()[1].setName("SketchArc_14_2") -SketchLine_76 = Sketch_6.addLine(6.890000000000002, -23.54999053274703, 43.88999999999999, -23.54999053274703) +SketchLine_76 = Sketch_6.addLine(6.89, -23.54999053274703, 43.89, -23.54999053274703) SketchLine_76.setName("SketchLine_81") SketchLine_76.result().setName("SketchLine_81") SketchConstraintCoincidence_92 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_76.endPoint()) SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_98") -SketchLine_77 = Sketch_6.addLine(6.89, -13.54999053274703, 43.88999999999999, -13.54999053274703) +SketchLine_77 = Sketch_6.addLine(6.89, -13.54999053274703, 43.89, -13.54999053274703) SketchLine_77.setName("SketchLine_82") SketchLine_77.result().setName("SketchLine_82") SketchConstraintCoincidence_93 = Sketch_6.setCoincident(SketchArc_13.startPoint(), SketchLine_77.startPoint()) SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_99") -SketchLine_78 = Sketch_6.addLine(44.88999999999999, -22.54999053274703, 44.88999999999999, -14.54999053274703) +SketchLine_78 = Sketch_6.addLine(44.89, -22.54999053274703, 44.89, -14.54999053274703) SketchLine_78.setName("SketchLine_83") SketchLine_78.result().setName("SketchLine_83") SketchConstraintCoincidence_94 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_78.endPoint()) @@ -547,7 +547,7 @@ SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/Edge-SketchLi SketchLine_81.setName("SketchLine_86") SketchLine_81.result().setName("SketchLine_86") SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_76.endPoint(), SketchLine_81.result(), 5.3) -SketchArc_14 = Sketch_6.addArc(5.890000000000002, -23.54999053274703, 5.89, -22.54999053274703, 6.890000000000002, -23.54999053274703, False) +SketchArc_14 = Sketch_6.addArc(5.89, -23.54999053274703, 5.89, -22.54999053274703, 6.89, -23.54999053274703, False) SketchArc_14.setName("SketchArc_15") SketchArc_14.result().setName("SketchArc_15") SketchArc_14.results()[1].setName("SketchArc_15_2") @@ -689,7 +689,7 @@ SketchArc_24.results()[1].setName("SketchArc_25_2") SketchArc_23.setName("SketchArc_24") SketchArc_23.result().setName("SketchArc_24") SketchArc_23.results()[1].setName("SketchArc_24_2") -SketchPoint_9 = Sketch_6.addPoint(1.460819920296274e-014, -49.84999053274704) +SketchPoint_9 = Sketch_6.addPoint(0, -49.84999053274704) SketchPoint_9.setName("SketchPoint_11") SketchPoint_9.result().setName("SketchPoint_11") SketchConstraintCoincidence_112 = Sketch_6.setCoincident(SketchPoint_9.coordinates(), SketchLine_80.result()) @@ -821,12 +821,12 @@ SketchArc_35.results()[1].setName("SketchArc_36_2") model.do() Sketch_6.setName("Sketch_7") Sketch_6.result().setName("Sketch_7") -ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("FACE", "Sketch_7/Face-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("FACE", "Sketch_7/Face-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("FACE", "Sketch_7/Face-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")]) +ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")]) Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1")) SketchLine_126 = Sketch_7.addLine(-153.5, -37.049990532747, -152.3000099350335, -37.0499905327475) SketchLine_126.setName("SketchLine_135") SketchLine_126.result().setName("SketchLine_135") -SketchLine_127 = Sketch_7.addLine(-150.7999999999999, -38.54999290880026, -150.8, -43.54999111476925) +SketchLine_127 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -43.54999111476925) SketchLine_127.setName("SketchLine_138") SketchLine_127.result().setName("SketchLine_138") SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_67s-SketchLine_68e-SketchLine_69e")) @@ -869,11 +869,11 @@ SketchPoint_11.setName("SketchPoint_13") SketchPoint_11.result().setName("SketchPoint_13") SketchConstraintCoincidence_118 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchPoint_11.result()) SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_125") -SketchArc_59 = Sketch_7.addArc(-152.3, -38.54999053274712, -150.7999999999999, -38.54999290880026, -152.3000099350335, -37.0499905327475, False) +SketchArc_59 = Sketch_7.addArc(-152.3, -38.54999053274712, -150.8, -38.54999290880026, -152.3000099350335, -37.0499905327475, False) SketchArc_59.setName("SketchArc_60") SketchArc_59.result().setName("SketchArc_60") SketchArc_59.results()[1].setName("SketchArc_60_2") -SketchLine_133 = Sketch_7.addLine(-150.7999999999999, -38.54999290880026, -150.8, -45.049990532747) +SketchLine_133 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -45.049990532747) SketchLine_133.setName("SketchLine_136") SketchLine_133.result().setName("SketchLine_136") SketchLine_133.setAuxiliary(True) @@ -916,15 +916,15 @@ Sketch_7.setName("Sketch_8") Sketch_7.result().setName("Sketch_8") ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_5_1")]) Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_2")) -SketchLine_134 = Sketch_8.addLine(0.8499999999999983, 50.75, -0.8500000000000015, 50.75) +SketchLine_134 = Sketch_8.addLine(0.85, 50.75, -0.85, 50.75) SketchLine_134.setName("SketchLine_139") SketchLine_134.result().setName("SketchLine_139") -SketchLine_135 = Sketch_8.addLine(-0.8500000000000015, 47.45, 0.8499999999999983, 47.45) +SketchLine_135 = Sketch_8.addLine(-0.85, 47.45, 0.85, 47.45) SketchLine_135.setName("SketchLine_141") SketchLine_135.result().setName("SketchLine_141") SketchConstraintHorizontal_20 = Sketch_8.setHorizontal(SketchLine_134.result()) SketchConstraintHorizontal_21 = Sketch_8.setHorizontal(SketchLine_135.result()) -SketchArc_61 = Sketch_8.addArc(0.8499999999999999, 49.1, 0.8499999999999983, 47.45, 0.8499999999999983, 50.75, False) +SketchArc_61 = Sketch_8.addArc(0.85, 49.1, 0.85, 47.45, 0.85, 50.75, False) SketchArc_61.setName("SketchArc_63") SketchArc_61.result().setName("SketchArc_63") SketchArc_61.results()[1].setName("SketchArc_63_2") @@ -933,7 +933,7 @@ SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_146") SketchConstraintCoincidence_132 = Sketch_8.setCoincident(SketchArc_61.startPoint(), SketchLine_135.endPoint()) SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_148") SketchConstraintDistance_17 = Sketch_8.setDistance(SketchLine_134.result(), SketchLine_135.endPoint(), 3.3) -SketchLine_136 = Sketch_8.addLine(0.8499999999999983, 50.75, 0.8499999999999983, 47.45) +SketchLine_136 = Sketch_8.addLine(0.85, 50.75, 0.85, 47.45) SketchLine_136.setName("SketchLine_140") SketchLine_136.result().setName("SketchLine_140") SketchLine_136.setAuxiliary(True) @@ -945,7 +945,7 @@ SketchConstraintCoincidence_135 = Sketch_8.setCoincident(SketchLine_135.endPoint SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_140") SketchConstraintCoincidence_136 = Sketch_8.setCoincident(SketchArc_61.startPoint(), SketchLine_136.endPoint()) SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_141") -SketchLine_137 = Sketch_8.addLine(-0.8500000000000015, 50.75, -0.8500000000000015, 47.45) +SketchLine_137 = Sketch_8.addLine(-0.85, 50.75, -0.85, 47.45) SketchLine_137.setName("SketchLine_142") SketchLine_137.result().setName("SketchLine_142") SketchLine_137.setAuxiliary(True) @@ -958,7 +958,7 @@ SketchConstraintLength_10 = Sketch_8.setLength(SketchLine_134.result(), 1.7) SketchConstraintLength_10.setName("SketchConstraintLength_11") SketchConstraintVertical_17 = Sketch_8.setVertical(SketchLine_137.result()) SketchConstraintVertical_18 = Sketch_8.setVertical(SketchLine_136.result()) -SketchLine_138 = Sketch_8.addLine(0.8499999999999983, 50.75, -0.8500000000000015, 47.45) +SketchLine_138 = Sketch_8.addLine(0.85, 50.75, -0.85, 47.45) SketchLine_138.setName("SketchLine_143") SketchLine_138.result().setName("SketchLine_143") SketchLine_138.setAuxiliary(True) @@ -985,7 +985,7 @@ SketchLine_139.setName("SketchLine_144") SketchLine_139.result().setName("SketchLine_144") SketchConstraintCoincidence_145 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_139.result()) SketchConstraintCoincidence_145.setName("SketchConstraintCoincidence_157") -SketchArc_62 = Sketch_8.addArc(-0.8500000000000004, 49.1, -0.8500000000000015, 50.75, -0.8500000000000015, 47.45, False) +SketchArc_62 = Sketch_8.addArc(-0.85, 49.1, -0.85, 50.75, -0.85, 47.45, False) SketchConstraintCoincidence_146 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchArc_62.endPoint()) SketchConstraintCoincidence_146.setName("SketchConstraintCoincidence_149") SketchConstraintCoincidence_147 = Sketch_8.setCoincident(SketchLine_137.endPoint(), SketchArc_62.endPoint()) @@ -1048,8 +1048,8 @@ model.testNbResults(ExtrusionCut_7, 1) model.testNbSubResults(ExtrusionCut_7, [0]) model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.SOLID, [1]) model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.FACE, [156]) -model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.EDGE, [920]) -model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.VERTEX, [1840]) -model.testResultsVolumes(ExtrusionCut_7, [5345.689532925511230132542550564]) +model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.EDGE, [916]) +model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.VERTEX, [1832]) +model.testResultsVolumes(ExtrusionCut_7, [5345.689484659372283203992992640]) assert(model.checkPythonDump) diff --git a/test.models/wheel_rim.py b/test.models/wheel_rim.py index 2c456ef9f..bb8035203 100644 --- a/test.models/wheel_rim.py +++ b/test.models/wheel_rim.py @@ -59,6 +59,16 @@ SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_7.startPoint( SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_20") SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchArc_3.results()[1]) SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchArc_2.results()[1]) +model.do() + +# check overconstraint message appears +assert Sketch_1.solverError().value() != "", "FAILED: Sketch should report over-constrained situation" +# remove duplicated Tangent constraint +Part_1_doc.removeFeature(SketchConstraintTangent_3.feature()) +model.do() +assert Sketch_1.solverError().value() == "", "FAILED: Sketch should NOT report over-constrained situation" + +# continue creating model SketchLine_8 = Sketch_1.addLine(16.63997893808557, 190, 16.63997893808557, 184) SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_8.startPoint()) SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_21") @@ -234,6 +244,6 @@ model.testNbSubShapes(Boolean_1, GeomAPI_Shape.SOLID, [1]) model.testNbSubShapes(Boolean_1, GeomAPI_Shape.FACE, [35]) model.testNbSubShapes(Boolean_1, GeomAPI_Shape.EDGE, [162]) model.testNbSubShapes(Boolean_1, GeomAPI_Shape.VERTEX, [324]) -model.testResultsVolumes(Boolean_1, [2053931.831648423336446285247802734]) +model.testResultsVolumes(Boolean_1, [2053931.555419394280761480331420898]) assert(model.checkPythonDump())