From: rnv Date: Fri, 15 Dec 2017 14:32:02 +0000 (+0300) Subject: Improve SMESH python documentation. X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=7ba9bc5011219275e0cee2463c5c216a7503fbc2;p=modules%2Fsmesh.git Improve SMESH python documentation. --- diff --git a/doc/salome/gui/SMESH/input/connectivity.rst b/doc/salome/gui/SMESH/input/connectivity.rst index 1b61565a0..c487d7137 100644 --- a/doc/salome/gui/SMESH/input/connectivity.rst +++ b/doc/salome/gui/SMESH/input/connectivity.rst @@ -8,39 +8,39 @@ The following images show order of nodes in correctly defined elements. +------------------------------------------------------------------------------+ | Edge (segment): linear and quadratic | -| .. image:: ../images/connectivity_edge.png | +| .. image:: ../images/connectivity_edge.png | | :align: center | +------------------------------------------------------------------------------+ | Triangle: linear, quadratic and bi-quadratic | -| .. image:: ../images/connectivity_tria.png | +| .. image:: ../images/connectivity_tria.png | | :align: center | +------------------------------------------------------------------------------+ | Quadrangle: linear, quadratic and bi-quadratic | -| .. image:: ../images/connectivity_quad.png | +| .. image:: ../images/connectivity_quad.png | | :align: center | +------------------------------------------------------------------------------+ | Polygon: linear and quadratic | -| .. image:: ../images/connectivity_polygon.png | +| .. image:: ../images/connectivity_polygon.png | | :align: center | +------------------------------------------------------------------------------+ | Tetrahedron: linear and quadratic | -| .. image:: ../images/connectivity_tetra.png | +| .. image:: ../images/connectivity_tetra.png | | :align: center | +------------------------------------------------------------------------------+ | Hexahedron: linear, quadratic and tri-quadratic | -| .. image:: ../images/connectivity_hexa.png | +| .. image:: ../images/connectivity_hexa.png | | :align: center | +------------------------------------------------------------------------------+ | Pentahedron: linear and quadratic | -| .. image:: ../images/connectivity_penta.png | +| .. image:: ../images/connectivity_penta.png | | :align: center | +------------------------------------------------------------------------------+ | Pyramid: linear and quadratic | -| .. image:: ../images/connectivity_pyramid.png | +| .. image:: ../images/connectivity_pyramid.png | | :align: center | +------------------------------------------------------------------------------+ | Hexagonal prism | -| .. image:: ../images/connectivity_hex_prism.png | +| .. image:: ../images/connectivity_hex_prism.png | | :align: center | +------------------------------------------------------------------------------+ | Polyhedron is defined by | @@ -59,7 +59,7 @@ The following images show order of nodes in correctly defined elements. | [ 1,2,3, 1,4,5,2, 2,5,6,3, 3,6,4,1, 4,7,9,5, 5,9,8,6, 6,8,7,4, 7,8,9 ] | | and quantities [ 3, 4, 4, 4, 4, 4, 4, 3 ] | | | -| .. image:: ../images/connectivity_polyhedron.png | +| .. image:: ../images/connectivity_polyhedron.png | | :align: center | | | | Order of nodes of a facet must assure outward direction of its normal. | diff --git a/doc/salome/gui/SMESH/input/modules.rst b/doc/salome/gui/SMESH/input/modules.rst new file mode 100644 index 000000000..c9365d7a7 --- /dev/null +++ b/doc/salome/gui/SMESH/input/modules.rst @@ -0,0 +1,967 @@ +.. _modules_page: + +####### +Modules +####### + +******************************** +Auxiliary methods and structures +******************************** + +Functions: + +:meth:`def ParseParameters ` + +:meth:`def ParseAngles ` + +:meth:`def __initPointStruct ` + +:meth:`def __initAxisStruct ` + +:meth:`def IsEqual ` + +:meth:`def GetName ` + +:meth:`def TreatHypoStatus ` + +:meth:`def AssureGeomPublished ` + +:meth:`def FirstVertexOnCurve ` + +:meth:`def DumpPython ` + +:meth:`def SetDumpPythonHistorical ` + +:meth:`def init_smesh ` + +:meth:`def EnumToLong ` + +:meth:`def ColorToString ` + +:meth:`def GetPointStruct ` + +:meth:`def GetDirStruct ` + +:meth:`def MakeDirStruct ` + +:meth:`def GetAxisStruct ` + +:meth:`def SetName ` + +:meth:`def SetEmbeddedMode ` + +:meth:`def IsEmbeddedMode ` + +:meth:`def SetCurrentStudy ` + +:meth:`def GetCurrentStudy ` + +:meth:`def GetSubShapesId ` + +:meth:`def SetBoundaryBoxSegmentation ` + +:meth:`def GetSubShapeName ` + +:meth:`def GetLog ` + +:meth:`def ClearLog ` + +:meth:`def GetId ` + +:meth:`def GetStudyId ` + +:meth:`def GetIDSource ` + + + +*************** +Creating Meshes +*************** + +Functions: + +:meth:`def Concatenate ` + +:meth:`def CopyMesh ` + +Importing and exporting meshes +############################## + +Functions: + +:meth:`def CreateMeshesFromUNV ` + +:meth:`def CreateMeshesFromMED ` + +:meth:`def CreateMeshesFromSAUV ` + +:meth:`def CreateMeshesFromSTL ` + +:meth:`def CreateMeshesFromCGNS ` + +:meth:`def CreateMeshesFromGMF ` + +:meth:`def ExportMED ` + +:meth:`def ExportSAUV ` + +:meth:`def ExportDAT ` + +:meth:`def ExportUNV ` + +:meth:`def ExportSTL ` + +:meth:`def ExportCGNS ` + +:meth:`def ExportGMF ` + +:meth:`def ExportToMED ` + + +Constructing meshes +################### + +Functions: + +:meth:`def Mesh ` + +:meth:`def __init__ ` + +:meth:`def SetMesh ` + +:meth:`def GetMesh ` + +:meth:`def SetName ` + +:meth:`def GetShape ` + +:meth:`def SetShape ` + +:meth:`def IsReadyToCompute ` + +:meth:`def GetAlgoState ` + +:meth:`def Evaluate ` + +:meth:`def Compute ` + +:meth:`def GetComputeErrors ` + +:meth:`def GetFailedShapes ` + +:meth:`def GetMeshOrder ` + +:meth:`def SetMeshOrder ` + +:meth:`def Clear ` + + +Defining Algorithms +################### + +Basic meshing algorithms +======================== + +Data Structures: + +:class:`class StdMeshersBuilder_Segment ` + +:class:`class StdMeshersBuilder_Segment_Python ` + +:class:`class StdMeshersBuilder_Triangle_MEFISTO ` + +:class:`class StdMeshersBuilder_Quadrangle ` + +:class:`class StdMeshersBuilder_Hexahedron ` + +:class:`class StdMeshersBuilder_UseExistingElements_1D ` + +:class:`class StdMeshersBuilder_UseExistingElements_1D2D ` + +:class:`class StdMeshersBuilder_Cartesian_3D ` + +:class:`class StdMeshersBuilder_UseExisting_1D ` + +:class:`class StdMeshersBuilder_UseExisting_2D ` + +Functions: + +:meth:`def AutomaticTetrahedralization ` + +:meth:`def AutomaticHexahedralization ` + + + + +Projection algorithms +===================== + +Data Structures: + +:class:`class StdMeshersBuilder_Projection1D ` + +:class:`class StdMeshersBuilder_Projection2D ` + +:class:`class StdMeshersBuilder_Projection1D2D ` + +:class:`class StdMeshersBuilder_Projection3D ` + + +Segments around vertex +====================== + +Functions: + +:meth:`def LengthNearVertex ` + +3D extrusion meshing algorithms +=============================== + +Data Structures: + +:class:`class StdMeshersBuilder_Prism3D ` + +:class:`class StdMeshersBuilder_RadialPrism3D ` + + +Mesh_Algorithm +============== + +:class:`class Mesh_Algorithm ` + + +Defining hypotheses +################### + +1D Meshing Hypotheses +===================== + +Functions: + +:meth:`def ReversedEdgeIndices ` + +:meth:`def LocalLength ` + +:meth:`def MaxSize ` + +:meth:`def NumberOfSegments ` + +:meth:`def Adaptive ` + +:meth:`def Arithmetic1D ` + +:meth:`def GeometricProgression ` + +:meth:`def FixedPoints1D ` + +:meth:`def StartEndLength ` + +:meth:`def Deflection1D ` + +:meth:`def AutomaticLength ` + +:meth:`def PythonSplit1D ` + + +2D Meshing Hypotheses +===================== + +Functions: + +:meth:`def MaxElementArea ` + +:meth:`def LengthFromEdges ` + + +Quadrangle Hypotheses +===================== + +Functions: + +:meth:`def QuadrangleParameters ` + +:meth:`def QuadranglePreference ` + +:meth:`def TrianglePreference ` + +:meth:`def Reduced ` + +:meth:`def TriangleVertex ` + + + +Additional Hypotheses +===================== + +Functions: + +:meth:`def ViscousLayers ` + +:meth:`def ViscousLayers2D ` + +:meth:`def Propagation ` + +:meth:`def PropagationOfDistribution ` + +:meth:`def QuadraticMesh ` + + +Constructing sub-meshes +####################### + +Functions: + +:meth:`def GetSubMesh ` + +:meth:`def ClearSubMesh ` + +:meth:`def Compute ` + + + +Editing meshes +############## + +Functions: + +:meth:`def AddHypothesis ` + +:meth:`def IsUsedHypothesis ` + +:meth:`def RemoveHypothesis ` + +:meth:`def GetHypothesisList ` + +:meth:`def RemoveGlobalHypotheses ` + + +**************** +Mesh Information +**************** + +Functions: + +:meth:`def GetMeshInfo ` + +:meth:`def GetGeometryByMeshElement ` + +:meth:`def MeshDimension ` + +:meth:`def GetMeshInfo ` + +:meth:`def NbNodes ` + +:meth:`def NbElements ` + +:meth:`def Nb0DElements ` + +:meth:`def NbBalls ` + +:meth:`def NbEdges ` + +:meth:`def NbEdgesOfOrder ` + +:meth:`def NbFaces ` + +:meth:`def NbFacesOfOrder ` + +:meth:`def NbTriangles ` + +:meth:`def NbTrianglesOfOrder ` + +:meth:`def NbBiQuadTriangles ` + +:meth:`def NbQuadrangles ` + +:meth:`def NbQuadranglesOfOrder ` + +:meth:`def NbBiQuadQuadrangles ` + +:meth:`def NbPolygons ` + +:meth:`def NbVolumes ` + +:meth:`def NbVolumesOfOrder ` + +:meth:`def NbTetras ` + +:meth:`def NbTetrasOfOrder ` + +:meth:`def NbHexas ` + +:meth:`def NbHexasOfOrder ` + +:meth:`def NbTriQuadraticHexas ` + +:meth:`def NbPyramids ` + +:meth:`def NbPyramidsOfOrder ` + +:meth:`def NbPrisms ` + +:meth:`def NbPrismsOfOrder ` + +:meth:`def NbHexagonalPrisms ` + +:meth:`def NbPolyhedrons ` + +:meth:`def NbSubMesh ` + +:meth:`def GetElementsId ` + +:meth:`def GetElementsByType ` + +:meth:`def GetNodesId ` + +:meth:`def GetElementType ` + +:meth:`def GetElementGeomType ` + +:meth:`def GetElementShape ` + +:meth:`def GetSubMeshElementsId ` + +:meth:`def GetSubMeshNodesId ` + +:meth:`def GetSubMeshElementType ` + +:meth:`def Dump ` + +:meth:`def GetNodeXYZ ` + +:meth:`def GetNodeInverseElements ` + +:meth:`def GetNodePosition ` + +:meth:`def GetElementPosition ` + +:meth:`def GetShapeID ` + +:meth:`def GetShapeIDForElem ` + +:meth:`def GetElemNbNodes ` + +:meth:`def GetElemNode ` + +:meth:`def GetElemNodes ` + +:meth:`def IsMediumNode ` + +:meth:`def IsMediumNodeOfAnyElem ` + +:meth:`def ElemNbEdges ` + +:meth:`def ElemNbFaces ` + +:meth:`def GetElemFaceNodes ` + +:meth:`def GetFaceNormal ` + +:meth:`def FindElementByNodes ` + +:meth:`def GetElementsByNodes ` + +:meth:`def IsPoly ` + +:meth:`def IsQuadratic ` + +:meth:`def GetBallDiameter ` + +:meth:`def BaryCenter ` + +:meth:`def FindNodeClosestTo ` + +:meth:`def FindElementsByPoint ` + +:meth:`def GetPointState ` + + +****************************** +Quality controls and Filtering +****************************** + +Functions: + +:meth:`def GetEmptyCriterion ` + +:meth:`def GetCriterion ` + +:meth:`def GetFilter ` + +:meth:`def GetFilterFromCriteria ` + +:meth:`def GetFunctor ` + +:meth:`def GetIdsFromFilter ` + +:meth:`def IsManifold ` + +:meth:`def IsCoherentOrientation2D ` + + + +***************** +Grouping elements +***************** + +Functions: + +:meth:`def SetAutoColor ` + +:meth:`def GetAutoColor ` + +:meth:`def HasDuplicatedGroupNamesMED ` + + +Creating groups +############### + +Functions: + +:meth:`def CreateEmptyGroup ` + +:meth:`def Group ` + +:meth:`def GroupOnGeom ` + +:meth:`def GroupOnFilter ` + +:meth:`def MakeGroupByIds ` + +:meth:`def MakeGroup ` + +:meth:`def MakeGroupByCriterion ` + +:meth:`def MakeGroupByCriteria ` + +:meth:`def MakeGroupByFilter ` + +:meth:`def GetGroups ` + +:meth:`def NbGroups ` + +:meth:`def GetGroupNames ` + +:meth:`def GetGroupByName ` + + +Using operations on groups +########################## + +Functions: + +:meth:`def UnionGroups ` + +:meth:`def UnionListOfGroups ` + +:meth:`def IntersectGroups ` + +:meth:`def IntersectListOfGroups ` + +:meth:`def CutGroups ` + +:meth:`def CutListOfGroups ` + +:meth:`def CreateDimGroup ` + +:meth:`def ConvertToStandalone ` + + +Deleting groups +############### + +Functions: + +:meth:`def RemoveGroup ` + +:meth:`def RemoveGroupWithContents ` + + +**************** +Modifying meshes +**************** + +Functions: + +:meth:`def GetPattern ` + +:meth:`def GetMeshEditor ` + + +Adding nodes and elements +######################### + +Functions: + +:meth:`def AddNode ` + +:meth:`def Add0DElement ` + +:meth:`def Add0DElementsToAllNodes ` + +:meth:`def AddBall ` + +:meth:`def AddEdge ` + +:meth:`def AddFace ` + +:meth:`def AddPolygonalFace ` + +:meth:`def AddQuadPolygonalFace ` + +:meth:`def AddVolume ` + +:meth:`def AddPolyhedralVolume ` + +:meth:`def AddPolyhedralVolumeByFaces ` + +:meth:`def SetNodeOnVertex ` + +:meth:`def SetNodeOnEdge ` + +:meth:`def SetNodeOnFace ` + +:meth:`def SetNodeInVolume ` + +:meth:`def SetMeshElementOnShape ` + +:meth:`def Make2DMeshFrom3D ` + +:meth:`def MakeBoundaryMesh ` + +:meth:`def MakeBoundaryElements ` + +:meth:`def GetLastCreatedNodes ` + +:meth:`def GetLastCreatedElems ` + +:meth:`def ClearLastCreated ` + + +Removing nodes and elements +########################### + +Functions: + +:meth:`def RemoveElements ` + +:meth:`def RemoveNodes ` + +:meth:`def RemoveOrphanNodes ` + + +Modifying nodes and elements +############################ + +functions: + +:meth:`def MoveNode ` + +:meth:`def MoveClosestNodeToPoint ` + +:meth:`def MeshToPassThroughAPoint ` + +:meth:`def ChangeElemNodes ` + + +Renumbering nodes and elements +############################## + +Functions: + +:meth:`def RenumberNodes ` + +:meth:`def RenumberElements ` + + +Transforming meshes (Translation, Rotation, Symmetry, Sewing, Merging) +###################################################################### + +Functions: + +:meth:`def Mirror ` + +:meth:`def MirrorMakeMesh ` + +:meth:`def MirrorObject ` + +:meth:`def MirrorObjectMakeMesh ` + +:meth:`def Translate ` + +:meth:`def TranslateMakeMesh ` + +:meth:`def TranslateObject ` + +:meth:`def TranslateObjectMakeMesh ` + +:meth:`def Rotate ` + +:meth:`def RotateMakeMesh ` + +:meth:`def RotateObject ` + +:meth:`def RotateObjectMakeMesh ` + +:meth:`def FindCoincidentNodes ` + +:meth:`def FindCoincidentNodesOnPart ` + +:meth:`def MergeNodes ` + +:meth:`def FindEqualElements ` + +:meth:`def MergeElements ` + +:meth:`def MergeEqualElements ` + +:meth:`def FindFreeBorders ` + +:meth:`def FillHole ` + +:meth:`def FindCoincidentFreeBorders ` + +:meth:`def SewCoincidentFreeBorders ` + +:meth:`def SewFreeBorders ` + +:meth:`def SewConformFreeBorders ` + +:meth:`def SewBorderToSide ` + +:meth:`def SewSideElements ` + + + +Uniting triangles +################# + +Functions: + +:meth:`def DeleteDiag ` + +:meth:`def TriToQuad ` + +:meth:`def TriToQuadObject ` + + + +Cutting elements +################ + +Functions: + +:meth:`def InverseDiag ` + +:meth:`def QuadToTri ` + +:meth:`def QuadToTriObject ` + +:meth:`def QuadTo4Tri ` + +:meth:`def SplitQuad ` + +:meth:`def SplitQuadObject ` + +:meth:`def BestSplit ` + +:meth:`def SplitVolumesIntoTetra ` + +:meth:`def SplitBiQuadraticIntoLinear ` + +:meth:`def SplitHexahedraIntoPrisms ` + +:meth:`def SplitQuadsNearTriangularFacets ` + +:meth:`def SplitHexaToTetras ` + +:meth:`def SplitHexaToPrisms ` + + + +Changing orientation of elements +################################ + +Functions: + +:meth:`def Reorient ` + +:meth:`def ReorientObject ` + +:meth:`def Reorient2D ` + +:meth:`def Reorient2DBy3D ` + + + +Smoothing +######### + +Functions: + +:meth:`def Smooth ` + +:meth:`def SmoothObject ` + +:meth:`def SmoothParametric ` + +:meth:`def SmoothParametricObject ` + + + +Extrusion and Revolution +######################## + +Functions: + +:meth:`def RotationSweepObjects ` + +:meth:`def RotationSweep ` + +:meth:`def RotationSweepObject ` + +:meth:`def RotationSweepObject1D ` + +:meth:`def RotationSweepObject2D ` + +:meth:`def ExtrusionSweepObjects ` + +:meth:`def ExtrusionSweep ` + +:meth:`def ExtrusionByNormal ` + +:meth:`def ExtrusionSweepObject ` + +:meth:`def ExtrusionSweepObject1D ` + +:meth:`def ExtrusionSweepObject2D ` + +:meth:`def AdvancedExtrusion ` + +:meth:`def ExtrusionAlongPathObjects ` + +:meth:`def ExtrusionAlongPathX ` + +:meth:`def ExtrusionAlongPath ` + +:meth:`def ExtrusionAlongPathObject ` + +:meth:`def ExtrusionAlongPathObject1D ` + +:meth:`def ExtrusionAlongPathObject2D ` + + + +Convert to/from Quadratic Mesh +############################## + +Functions: + +:meth:`def ConvertToQuadratic ` + +:meth:`def ConvertFromQuadratic ` + + + +Duplication of nodes and elements (to emulate cracks) +##################################################### + +Functions: + +:meth:`def DoubleElements ` + +:meth:`def DoubleNodes ` + +:meth:`def DoubleNode ` + +:meth:`def DoubleNodeGroup ` + +:meth:`def DoubleNodeGroups ` + +:meth:`def DoubleNodeElem ` + +:meth:`def DoubleNodeElemInRegion ` + +:meth:`def DoubleNodeElemGroup ` + +:meth:`def DoubleNodeElemGroupInRegion ` + +:meth:`def DoubleNodeElemGroups ` + +:meth:`def DoubleNodeElemGroupsInRegion ` + +:meth:`def AffectedElemGroupsInRegion ` + +:meth:`def DoubleNodesOnGroupBoundaries ` + +:meth:`def CreateFlatElementsOnFacesGroups ` + + + +************ +Measurements +************ + +Functions: + + +:meth:`def MinDistance ` + +:meth:`def GetMinDistance ` + +:meth:`def BoundingBox ` + +:meth:`def GetBoundingBox ` + +:meth:`def GetLength ` + +:meth:`def GetArea ` + +:meth:`def GetVolume ` + +:meth:`def GetFreeBorders ` + +:meth:`def MinDistance ` + +:meth:`def GetMinDistance ` + +:meth:`def BoundingBox ` + +:meth:`def GetBoundingBox ` + +:meth:`def GetFunctor ` + +:meth:`def FunctorValue ` + +:meth:`def GetLength ` + +:meth:`def GetArea ` + +:meth:`def GetVolume ` + +:meth:`def GetMaxElementLength ` + +:meth:`def GetAspectRatio ` + +:meth:`def GetWarping ` + +:meth:`def GetMinimumAngle ` + +:meth:`def GetTaper ` + +:meth:`def GetSkew ` + +:meth:`def GetMinMax ` + + +******************************* +Accessing SMESH object in study +******************************* + +Data Structures: + +:class:`SMeshStudyTools ` + + + + diff --git a/doc/salome/gui/SMESH/input/smeshpy_interface.rst b/doc/salome/gui/SMESH/input/smeshpy_interface.rst index 48a064280..7a71f5cb6 100644 --- a/doc/salome/gui/SMESH/input/smeshpy_interface.rst +++ b/doc/salome/gui/SMESH/input/smeshpy_interface.rst @@ -9,9 +9,9 @@ be used for easy mesh creation and edition. Documentation of SALOME %Mesh module Python API is available in two forms: -- `Structured documentation `_, where all methods and classes are grouped by their functionality. +- :ref:`Structured documentation `, where all methods and classes are grouped by their functionality. -- `Linear documentation `_ grouped only by classes, declared in the :ref:`smeshBuilder` and :ref:`StdMeshersBuilder` Python packages. +- :ref:`Linear documentation ` grouped only by classes, declared in the :mod:`smeshBuilder` and :mod:`StdMeshersBuilder` Python packages. With SALOME 7.2, the Python interface for Mesh has been slightly modified to offer new functionality. @@ -19,45 +19,45 @@ You may have to modify your scripts generated with SALOME 6 or older versions. Please see :ref:`smesh_migration_page`. -Class :ref:`smeshBuilder.smeshBuilder` provides an interface to create and handle +Class :class:`smeshBuilder.smeshBuilder` provides an interface to create and handle meshes. It can be used to create an empty mesh or to import mesh from the data file. As soon as a mesh is created, it is possible to manage it via its own -methods, described in class :ref:`smeshBuilder.Mesh` documentation. +methods, described in class :class:`smeshBuilder.Mesh` documentation. -Class :ref:`smeshstudytools.SMeshStudyTools` provides several methods to manipulate mesh objects in Salome study. +Class :class:`smeshstudytools.SMeshStudyTools` provides several methods to manipulate mesh objects in Salome study. A usual workflow to generate a mesh on geometry is following: -#. Create an instance of :ref:`smeshBuilder.smeshBuilder`: +#. Create an instance of :class:`smeshBuilder.smeshBuilder`: .. code-block:: python :linenos: from salome.smesh import smeshBuilder smesh = smeshBuilder.New( salome.myStudy ) -#. Create a :ref:`smeshBuilder.Mesh` object: +#. Create a :class:`smeshBuilder.Mesh` object: .. code-block:: python :linenos: - mesh = :ref:`smeshBuilder.smeshBuilder.Mesh`smesh.Mesh( geometry ) + mesh = smesh.Mesh( geometry ) #. Create and assign :ref:`basic_meshing_algos_page` by calling corresponding methods of the mesh. If a sub-shape is provided as an argument, a :ref:`constructing_submeshes_page` is implicitly created on this sub-shape: .. code-block:: python :linenos: - regular1D = :ref:`smeshBuilder.Mesh.Segment` - mefisto = :ref:`smeshBuilder.Mesh.Triangle` ( smeshBuilder.MEFISTO ) + regular1D = smeshBuilder.Mesh.Segment() + mefisto = smeshBuilder.Mesh.Triangle( smeshBuilder.MEFISTO ) # use other triangle algorithm on a face -- a sub-mesh appears in the mesh - netgen = :ref:`smeshBuilder.Mesh.Triangle` ( smeshBuilder.NETGEN_1D2D, face ) + netgen = smeshBuilder.Mesh.Triangle( smeshBuilder.NETGEN_1D2D, face ) #. Create and assign :ref:`about_hypo_page` by calling corresponding methods of algorithms: .. code-block:: python :linenos: - segLen10 = :ref:`StdMeshersBuilder.StdMeshersBuilder_Segment.LocalLength`( 10. ) - maxArea = :ref:`StdMeshersBuilder.StdMeshersBuilder_Segment.LocalLength`( 100. ) + segLen10 = StdMeshersBuilder.StdMeshersBuilder_Segment.LocalLength( 10. ) + maxArea = StdMeshersBuilder.StdMeshersBuilder_Segment.LocalLength( 100. ) netgen.SetMaxSize( 20. ) netgen.SetFineness( smeshBuilder.VeryCoarse ) @@ -65,7 +65,7 @@ A usual workflow to generate a mesh on geometry is following: .. code-block:: python :linenos: - :ref:`Mesh.Compute`() + Mesh.Compute() An easiest way to start with Python scripting is to do something in GUI and then to get a corresponding Python script via diff --git a/src/SMESH_SWIG/StdMeshersBuilder.py b/src/SMESH_SWIG/StdMeshersBuilder.py index e4030fdcd..85408ae79 100644 --- a/src/SMESH_SWIG/StdMeshersBuilder.py +++ b/src/SMESH_SWIG/StdMeshersBuilder.py @@ -89,7 +89,7 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): It can be created by calling smeshBuilder.Mesh.Segment(geom=0) """ - # @ingroup l3_algos_basic + meshMethod = "Segment" """ @@ -118,7 +118,7 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): Parameters: mesh: parent mesh object algorithm is assigned to geom: geometry (shape/sub-shape) algorithm is assigned to; - if it is @c 0 (default), the algorithm is assigned to the main shape + if it is :code:`0` (default), the algorithm is assigned to the main shape """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, self.algoType) @@ -145,7 +145,6 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): Returns: an instance of StdMeshers_LocalLength hypothesis """ - # @ingroup l3_hypos_1dhyps from salome.smesh.smeshBuilder import IsEqual comFun=lambda hyp, args: IsEqual(hyp.GetLength(), args[0]) and IsEqual(hyp.GetPrecision(), args[1]) @@ -167,7 +166,7 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): Returns: an instance of StdMeshers_MaxLength hypothesis """ - # @ingroup l3_hypos_1dhyps + hyp = self.Hypothesis("MaxLength", [length], UseExisting=UseExisting) if length > 0.0: @@ -187,16 +186,23 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): hyp.SetUsePreestimatedLength( length == 0.0 ) return hyp - ## Defines "NumberOfSegments" hypothesis to cut an edge in a fixed number of segments - # @param n for the number of segments that cut an edge - # @param s for the scale factor (optional) - # @param reversedEdges is a list of edges to mesh using reversed orientation. - # A list item can also be a tuple (edge, 1st_vertex_of_edge) - # @param UseExisting if ==true - searches for an existing hypothesis created with - # the same parameters, else (default) - create a new one - # @return an instance of StdMeshers_NumberOfSegments hypothesis - # @ingroup l3_hypos_1dhyps def NumberOfSegments(self, n, s=[], reversedEdges=[], UseExisting=0): + """ + Defines "NumberOfSegments" hypothesis to cut an edge in a fixed number of segments + + Parameters: + n: for the number of segments that cut an edge + s: for the scale factor (optional) + reversedEdges: is a list of edges to mesh using reversed orientation. + A list item can also be a tuple (edge, 1st_vertex_of_edge) + UseExisting: if ==true - searches for an existing hypothesis created with + the same parameters, else (default) - create a new one + + Returns: + an instance of StdMeshers_NumberOfSegments hypothesis + """ + + if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges reversedEdges, UseExisting = [], reversedEdges entry = self.MainShapeEntry() @@ -215,10 +221,11 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): hyp.SetObjectEntry( entry ) return hyp - ## Private method - # - # Checks if the given "NumberOfSegments" hypothesis has the same parameters as the given arguments def _compareNumberOfSegments(self, hyp, args): + """ + Private method + Checks if the given "NumberOfSegments" hypothesis has the same parameters as the given arguments + """ if hyp.GetNumberOfSegments() == args[0]: if len(args) == 3: if hyp.GetReversedEdges() == args[1]: @@ -233,18 +240,24 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): return True return False - ## Defines "Adaptive" hypothesis to cut an edge into segments keeping segment size - # within the given range and considering (1) deflection of segments from the edge - # and (2) distance from segments to closest edges and faces to have segment length - # not longer than two times shortest distances to edges and faces. - # @param minSize defines the minimal allowed segment length - # @param maxSize defines the maximal allowed segment length - # @param deflection defines the maximal allowed distance from a segment to an edge - # @param UseExisting if ==true - searches for an existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @return an instance of StdMeshers_Adaptive1D hypothesis - # @ingroup l3_hypos_1dhyps def Adaptive(self, minSize, maxSize, deflection, UseExisting=False): + """ + Defines "Adaptive" hypothesis to cut an edge into segments keeping segment size + within the given range and considering (1) deflection of segments from the edge + and (2) distance from segments to closest edges and faces to have segment length + not longer than two times shortest distances to edges and faces. + + Parameters: + minSize: defines the minimal allowed segment length + maxSize: defines the maximal allowed segment length + deflection: defines the maximal allowed distance from a segment to an edge + UseExisting: if ==true - searches for an existing hypothesis created with + the same parameters, else (default) - creates a new one + + Returns: + an instance of StdMeshers_Adaptive1D hypothesis + """ + from salome.smesh.smeshBuilder import IsEqual compFun = lambda hyp, args: ( IsEqual(hyp.GetMinSize(), args[0]) and \ IsEqual(hyp.GetMaxSize(), args[1]) and \ @@ -256,17 +269,23 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): hyp.SetDeflection(deflection) return hyp - ## Defines "Arithmetic1D" hypothesis to cut an edge in several segments with a length - # that changes in arithmetic progression - # @param start defines the length of the first segment - # @param end defines the length of the last segment - # @param reversedEdges is a list of edges to mesh using reversed orientation. - # A list item can also be a tuple (edge, 1st_vertex_of_edge) - # @param UseExisting if ==true - searches for an existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @return an instance of StdMeshers_Arithmetic1D hypothesis - # @ingroup l3_hypos_1dhyps def Arithmetic1D(self, start, end, reversedEdges=[], UseExisting=0): + """ + Defines "Arithmetic1D" hypothesis to cut an edge in several segments with a length + that changes in arithmetic progression + + Parameters: + start: defines the length of the first segment + end: defines the length of the last segment + reversedEdges: is a list of edges to mesh using reversed orientation. + A list item can also be a tuple (edge, 1st_vertex_of_edge) + UseExisting: if ==true - searches for an existing hypothesis created with + the same parameters, else (default) - creates a new one + + Returns: + an instance of StdMeshers_Arithmetic1D hypothesis + """ + if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges reversedEdges, UseExisting = [], reversedEdges reversedEdgeInd = self.ReversedEdgeIndices(reversedEdges) @@ -284,17 +303,23 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): hyp.SetObjectEntry( entry ) return hyp - ## Defines "GeometricProgression" hypothesis to cut an edge in several - # segments with a length that changes in Geometric progression - # @param start defines the length of the first segment - # @param ratio defines the common ratio of the geometric progression - # @param reversedEdges is a list of edges to mesh using reversed orientation. - # A list item can also be a tuple (edge, 1st_vertex_of_edge) - # @param UseExisting if ==true - searches for an existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @return an instance of StdMeshers_Geometric1D hypothesis - # @ingroup l3_hypos_1dhyps def GeometricProgression(self, start, ratio, reversedEdges=[], UseExisting=0): + """ + Defines "GeometricProgression" hypothesis to cut an edge in several + segments with a length that changes in Geometric progression + + Parameters: + start: defines the length of the first segment + ratio: defines the common ratio of the geometric progression + reversedEdges: is a list of edges to mesh using reversed orientation. + A list item can also be a tuple (edge, 1st_vertex_of_edge) + UseExisting: if ==true - searches for an existing hypothesis created with + the same parameters, else (default) - creates a new one + + Returns: + an instance of StdMeshers_Geometric1D hypothesis + """ + reversedEdgeInd = self.ReversedEdgeIndices(reversedEdges) entry = self.MainShapeEntry() from salome.smesh.smeshBuilder import IsEqual @@ -310,20 +335,26 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): hyp.SetObjectEntry( entry ) return hyp - ## Defines "FixedPoints1D" hypothesis to cut an edge using parameter - # on curve from 0 to 1 (additionally it is neecessary to check - # orientation of edges and create list of reversed edges if it is - # needed) and sets numbers of segments between given points (default - # values are 1) - # @param points defines the list of parameters on curve - # @param nbSegs defines the list of numbers of segments - # @param reversedEdges is a list of edges to mesh using reversed orientation. - # A list item can also be a tuple (edge, 1st_vertex_of_edge) - # @param UseExisting if ==true - searches for an existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @return an instance of StdMeshers_FixedPoints1D hypothesis - # @ingroup l3_hypos_1dhyps def FixedPoints1D(self, points, nbSegs=[1], reversedEdges=[], UseExisting=0): + """ + Defines "FixedPoints1D" hypothesis to cut an edge using parameter + on curve from 0 to 1 (additionally it is neecessary to check + orientation of edges and create list of reversed edges if it is + needed) and sets numbers of segments between given points (default + values are 1) + + Parameters: + points: defines the list of parameters on curve + nbSegs: defines the list of numbers of segments + reversedEdges: is a list of edges to mesh using reversed orientation. + A list item can also be a tuple (edge, 1st_vertex_of_edge) + UseExisting: if ==true - searches for an existing hypothesis created with + the same parameters, else (default) - creates a new one + + Returns: + an instance of StdMeshers_FixedPoints1D hypothesis + """ + if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges reversedEdges, UseExisting = [], reversedEdges reversedEdgeInd = self.ReversedEdgeIndices(reversedEdges) @@ -340,16 +371,22 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): hyp.SetObjectEntry(entry) return hyp - ## Defines "StartEndLength" hypothesis to cut an edge in several segments with increasing geometric length - # @param start defines the length of the first segment - # @param end defines the length of the last segment - # @param reversedEdges is a list of edges to mesh using reversed orientation. - # A list item can also be a tuple (edge, 1st_vertex_of_edge) - # @param UseExisting if ==true - searches for an existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @return an instance of StdMeshers_StartEndLength hypothesis - # @ingroup l3_hypos_1dhyps def StartEndLength(self, start, end, reversedEdges=[], UseExisting=0): + """ + Defines "StartEndLength" hypothesis to cut an edge in several segments with increasing geometric length + + Parameters: + start: defines the length of the first segment + end: defines the length of the last segment + reversedEdges: is a list of edges to mesh using reversed orientation. + A list item can also be a tuple (edge, 1st_vertex_of_edge) + UseExisting: if ==true - searches for an existing hypothesis created with + the same parameters, else (default) - creates a new one + + Returns: + an instance of StdMeshers_StartEndLength hypothesis + """ + if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges reversedEdges, UseExisting = [], reversedEdges reversedEdgeInd = self.ReversedEdgeIndices(reversedEdges) @@ -367,41 +404,53 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): hyp.SetObjectEntry( entry ) return hyp - ## Defines "Deflection1D" hypothesis - # @param d for the deflection - # @param UseExisting if ==true - searches for an existing hypothesis created with - # the same parameters, else (default) - create a new one - # @ingroup l3_hypos_1dhyps def Deflection1D(self, d, UseExisting=0): + """ + Defines "Deflection1D" hypothesis + + Parameters: + d: for the deflection + UseExisting: if ==true - searches for an existing hypothesis created with + the same parameters, else (default) - create a new one + """ + from salome.smesh.smeshBuilder import IsEqual compFun = lambda hyp, args: IsEqual(hyp.GetDeflection(), args[0]) hyp = self.Hypothesis("Deflection1D", [d], UseExisting=UseExisting, CompareMethod=compFun) hyp.SetDeflection(d) return hyp - ## Defines "Propagation" hypothesis that propagates 1D hypotheses - # from an edge where this hypothesis is assigned to - # on all other edges that are at the opposite side in case of quadrangular faces - # This hypothesis should be assigned to an edge to propagate a hypothesis from. - # @ingroup l3_hypos_additi def Propagation(self): + """ + Defines "Propagation" hypothesis that propagates 1D hypotheses + from an edge where this hypothesis is assigned to + on all other edges that are at the opposite side in case of quadrangular faces + This hypothesis should be assigned to an edge to propagate a hypothesis from. + """ + return self.Hypothesis("Propagation", UseExisting=1, CompareMethod=self.CompareEqualHyp) - ## Defines "Propagation of Node Distribution" hypothesis that propagates - # distribution of nodes from an edge where this hypothesis is assigned to, - # to opposite edges of quadrangular faces, so that number of segments on all these - # edges will be the same, as well as relations between segment lengths. - # @ingroup l3_hypos_additi def PropagationOfDistribution(self): + """ + Defines "Propagation of Node Distribution" hypothesis that propagates + distribution of nodes from an edge where this hypothesis is assigned to, + to opposite edges of quadrangular faces, so that number of segments on all these + edges will be the same, as well as relations between segment lengths. + """ + return self.Hypothesis("PropagOfDistribution", UseExisting=1, CompareMethod=self.CompareEqualHyp) - ## Defines "AutomaticLength" hypothesis - # @param fineness for the fineness [0-1] - # @param UseExisting if ==true - searches for an existing hypothesis created with the - # same parameters, else (default) - create a new one - # @ingroup l3_hypos_1dhyps def AutomaticLength(self, fineness=0, UseExisting=0): + """ + Defines "AutomaticLength" hypothesis + + Parameters: + fineness: for the fineness [0-1] + UseExisting: if ==true - searches for an existing hypothesis created with the + same parameters, else (default) - create a new one + """ + from salome.smesh.smeshBuilder import IsEqual compFun = lambda hyp, args: IsEqual(hyp.GetFineness(), args[0]) hyp = self.Hypothesis("AutomaticLength",[fineness],UseExisting=UseExisting, @@ -409,15 +458,19 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): hyp.SetFineness( fineness ) return hyp - ## Defines "SegmentLengthAroundVertex" hypothesis - # @param length for the segment length - # @param vertex for the length localization: the vertex index [0,1] | vertex object. - # Any other integer value means that the hypothesis will be set on the - # whole 1D shape, where Mesh_Segment algorithm is assigned. - # @param UseExisting if ==true - searches for an existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @ingroup l3_algos_segmarv def LengthNearVertex(self, length, vertex=0, UseExisting=0): + """ + Defines "SegmentLengthAroundVertex" hypothesis + + Parameters: + length: for the segment length + vertex: for the length localization: the vertex index [0,1] | vertex object. + Any other integer value means that the hypothesis will be set on the + whole 1D shape, where Mesh_Segment algorithm is assigned. + UseExisting: if ==true - searches for an existing hypothesis created with + the same parameters, else (default) - creates a new one + """ + import types store_geom = self.geom if type(vertex) is types.IntType: @@ -453,84 +506,108 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm): hyp.SetLength( length ) return hyp - ## Defines "QuadraticMesh" hypothesis, forcing construction of quadratic edges. - # If the 2D mesher sees that all boundary edges are quadratic, - # it generates quadratic faces, else it generates linear faces using - # medium nodes as if they are vertices. - # The 3D mesher generates quadratic volumes only if all boundary faces - # are quadratic, else it fails. - # - # @ingroup l3_hypos_additi def QuadraticMesh(self): + """ + Defines "QuadraticMesh" hypothesis, forcing construction of quadratic edges. + If the 2D mesher sees that all boundary edges are quadratic, + it generates quadratic faces, else it generates linear faces using + medium nodes as if they are vertices. + The 3D mesher generates quadratic volumes only if all boundary faces + are quadratic, else it fails. + """ + hyp = self.Hypothesis("QuadraticMesh", UseExisting=1, CompareMethod=self.CompareEqualHyp) return hyp pass # end of StdMeshersBuilder_Segment class -## Segment 1D algorithm for discretization of a set of adjacent edges as one edge. -# -# It is created by calling smeshBuilder.Mesh.Segment(smeshBuilder.COMPOSITE,geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_CompositeSegment(StdMeshersBuilder_Segment): + """ + Segment 1D algorithm for discretization of a set of adjacent edges as one edge. + + It is created by calling smeshBuilder.Mesh.Segment(smeshBuilder.COMPOSITE,geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Segment" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ + algoType = COMPOSITE - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ + isDefault = False - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ + docHelper = "Creates segment 1D algorithm for edges" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ self.Create(mesh, geom, self.algoType) pass pass # end of StdMeshersBuilder_CompositeSegment class -## Defines a segment 1D algorithm for discretization of edges with Python function -# -# It is created by calling smeshBuilder.Mesh.Segment(smeshBuilder.PYTHON,geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_Segment_Python(Mesh_Algorithm): + """ + Defines a segment 1D algorithm for discretization of edges with Python function + It is created by calling smeshBuilder.Mesh.Segment(smeshBuilder.PYTHON,geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Segment" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = PYTHON - ## doc string of the method - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ docHelper = "Creates segment 1D algorithm for edges" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ import Python1dPlugin self.Create(mesh, geom, self.algoType, "libPython1dEngine.so") pass - ## Defines "PythonSplit1D" hypothesis - # @param n for the number of segments that cut an edge - # @param func for the python function that calculates the length of all segments - # @param UseExisting if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @ingroup l3_hypos_1dhyps def PythonSplit1D(self, n, func, UseExisting=0): + """ + Defines "PythonSplit1D" hypothesis + + Parameters: + n: for the number of segments that cut an edge + func: for the python function that calculates the length of all segments + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ + compFun = lambda hyp, args: False hyp = self.Hypothesis("PythonSplit1D", [n], "libPython1dEngine.so", UseExisting=UseExisting, CompareMethod=compFun) @@ -540,43 +617,54 @@ class StdMeshersBuilder_Segment_Python(Mesh_Algorithm): pass # end of StdMeshersBuilder_Segment_Python class -## Triangle MEFISTO 2D algorithm -# -# It is created by calling smeshBuilder.Mesh.Triangle(smeshBuilder.MEFISTO,geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_Triangle_MEFISTO(Mesh_Algorithm): + """ + Triangle MEFISTO 2D algorithm + It is created by calling smeshBuilder.Mesh.Triangle(smeshBuilder.MEFISTO,geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Triangle" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = MEFISTO - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ isDefault = True - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ docHelper = "Creates triangle 2D algorithm for faces" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, self.algoType) pass - ## Defines "MaxElementArea" hypothesis basing on the definition of the maximum area of each triangle - # @param area for the maximum area of each triangle - # @param UseExisting if ==true - searches for an existing hypothesis created with the - # same parameters, else (default) - creates a new one - # - # @ingroup l3_hypos_2dhyps def MaxElementArea(self, area, UseExisting=0): + """ + Defines "MaxElementArea" hypothesis basing on the definition of the maximum area of each triangle + + Parameters: + area: for the maximum area of each triangle + UseExisting: if ==true - searches for an existing hypothesis created with the + same parameters, else (default) - creates a new one + """ + from salome.smesh.smeshBuilder import IsEqual comparator = lambda hyp, args: IsEqual(hyp.GetMaxElementArea(), args[0]) hyp = self.Hypothesis("MaxElementArea", [area], UseExisting=UseExisting, @@ -584,85 +672,101 @@ class StdMeshersBuilder_Triangle_MEFISTO(Mesh_Algorithm): hyp.SetMaxElementArea(area) return hyp - ## Defines "LengthFromEdges" hypothesis to build triangles - # based on the length of the edges taken from the wire - # - # @ingroup l3_hypos_2dhyps def LengthFromEdges(self): + """ + Defines "LengthFromEdges" hypothesis to build triangles + based on the length of the edges taken from the wire + """ + hyp = self.Hypothesis("LengthFromEdges", UseExisting=1, CompareMethod=self.CompareEqualHyp) return hyp pass # end of StdMeshersBuilder_Triangle_MEFISTO class -## Defines a quadrangle 2D algorithm -# -# It is created by calling smeshBuilder.Mesh.Quadrangle(geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_Quadrangle(Mesh_Algorithm): + """ + Defines a quadrangle 2D algorithm + It is created by calling smeshBuilder.Mesh.Quadrangle(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Quadrangle" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = QUADRANGLE - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ isDefault = True - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ docHelper = "Creates quadrangle 2D algorithm for faces" - ## hypothesis associated with algorithm - # @internal + """ + doc string of the method + """ params = 0 + """ + hypothesis associated with algorithm + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, self.algoType) pass - ## Defines "QuadrangleParameters" hypothesis - # @param quadType defines the algorithm of transition between differently descretized - # sides of a geometrical face: - # - QUAD_STANDARD - both triangles and quadrangles are possible in the transition - # area along the finer meshed sides. - # - QUAD_TRIANGLE_PREF - only triangles are built in the transition area along the - # finer meshed sides. - # - QUAD_QUADRANGLE_PREF - only quadrangles are built in the transition area along - # the finer meshed sides, iff the total quantity of segments on - # all four sides of the face is even (divisible by 2). - # - QUAD_QUADRANGLE_PREF_REVERSED - same as QUAD_QUADRANGLE_PREF but the transition - # area is located along the coarser meshed sides. - # - QUAD_REDUCED - only quadrangles are built and the transition between the sides - # is made gradually, layer by layer. This type has a limitation on - # the number of segments: one pair of opposite sides must have the - # same number of segments, the other pair must have an even difference - # between the numbers of segments on the sides. - # @param triangleVertex: vertex of a trilateral geometrical face, around which triangles - # will be created while other elements will be quadrangles. - # Vertex can be either a GEOM_Object or a vertex ID within the - # shape to mesh - # @param enfVertices: list of shapes defining positions where nodes (enforced nodes) - # must be created by the mesher. Shapes can be of any type, - # vertices of given shapes define positions of enforced nodes. - # Only vertices successfully projected to the face are used. - # @param enfPoints: list of points giving positions of enforced nodes. - # Point can be defined either as SMESH.PointStruct's - # ([SMESH.PointStruct(x1,y1,z1), SMESH.PointStruct(x2,y2,z2),...]) - # or triples of values ([[x1,y1,z1], [x2,y2,z2], ...]). - # In the case if the defined QuadrangleParameters() refer to a sole face, - # all given points must lie on this face, else the mesher fails. - # @param UseExisting: if \c True - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @ingroup l3_hypos_quad def QuadrangleParameters(self, quadType=StdMeshers.QUAD_STANDARD, triangleVertex=0, enfVertices=[],enfPoints=[],UseExisting=0): + """ + Defines "QuadrangleParameters" hypothesis + quadType defines the algorithm of transition between differently descretized + sides of a geometrical face: + + - QUAD_STANDARD - both triangles and quadrangles are possible in the transition + area along the finer meshed sides. + - QUAD_TRIANGLE_PREF - only triangles are built in the transition area along the + finer meshed sides. + - QUAD_QUADRANGLE_PREF - only quadrangles are built in the transition area along + the finer meshed sides, iff the total quantity of segments on + all four sides of the face is even (divisible by 2). + - QUAD_QUADRANGLE_PREF_REVERSED - same as QUAD_QUADRANGLE_PREF but the transition + area is located along the coarser meshed sides. + - QUAD_REDUCED - only quadrangles are built and the transition between the sides + is made gradually, layer by layer. This type has a limitation on + the number of segments: one pair of opposite sides must have the + same number of segments, the other pair must have an even difference + between the numbers of segments on the sides. + + Parameters: + triangleVertex: vertex of a trilateral geometrical face, around which triangles + will be created while other elements will be quadrangles. + Vertex can be either a GEOM_Object or a vertex ID within the + shape to mesh + enfVertices: list of shapes defining positions where nodes (enforced nodes) + must be created by the mesher. Shapes can be of any type, + vertices of given shapes define positions of enforced nodes. + Only vertices successfully projected to the face are used. + enfPoints: list of points giving positions of enforced nodes. + Point can be defined either as SMESH.PointStruct's + ([SMESH.PointStruct(x1,y1,z1), SMESH.PointStruct(x2,y2,z2),...]) + or triples of values ([[x1,y1,z1], [x2,y2,z2], ...]). + In the case if the defined QuadrangleParameters() refer to a sole face, + all given points must lie on this face, else the mesher fails. + UseExisting: if *True* - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ + + import GEOM, SMESH vertexID = triangleVertex if isinstance( triangleVertex, GEOM._objref_GEOM_Object ): @@ -697,123 +801,157 @@ class StdMeshersBuilder_Quadrangle(Mesh_Algorithm): self.params.SetEnforcedNodes( enfVertices, pStructs ) return self.params - ## Defines "QuadrangleParams" hypothesis with a type of quadrangulation that only - # quadrangles are built in the transition area along the finer meshed sides, - # iff the total quantity of segments on all four sides of the face is even. - # @param reversed if True, transition area is located along the coarser meshed sides. - # @param UseExisting: if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @ingroup l3_hypos_quad def QuadranglePreference(self, reversed=False, UseExisting=0): + """ + Defines "QuadrangleParams" hypothesis with a type of quadrangulation that only + quadrangles are built in the transition area along the finer meshed sides, + if the total quantity of segments on all four sides of the face is even. + + Parameters: + reversed: if True, transition area is located along the coarser meshed sides. + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ + if reversed: return self.QuadrangleParameters(QUAD_QUADRANGLE_PREF_REVERSED,UseExisting=UseExisting) return self.QuadrangleParameters(QUAD_QUADRANGLE_PREF,UseExisting=UseExisting) - ## Defines "QuadrangleParams" hypothesis with a type of quadrangulation that only - # triangles are built in the transition area along the finer meshed sides. - # @param UseExisting: if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @ingroup l3_hypos_quad def TrianglePreference(self, UseExisting=0): + """ + Defines "QuadrangleParams" hypothesis with a type of quadrangulation that only + triangles are built in the transition area along the finer meshed sides. + + Parameters: + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ + return self.QuadrangleParameters(QUAD_TRIANGLE_PREF,UseExisting=UseExisting) - ## Defines "QuadrangleParams" hypothesis with a type of quadrangulation that only - # quadrangles are built and the transition between the sides is made gradually, - # layer by layer. This type has a limitation on the number of segments: one pair - # of opposite sides must have the same number of segments, the other pair must - # have an even difference between the numbers of segments on the sides. - # @param UseExisting: if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @ingroup l3_hypos_quad def Reduced(self, UseExisting=0): + """ + Defines "QuadrangleParams" hypothesis with a type of quadrangulation that only + quadrangles are built and the transition between the sides is made gradually, + layer by layer. This type has a limitation on the number of segments: one pair + of opposite sides must have the same number of segments, the other pair must + have an even difference between the numbers of segments on the sides. + + Parameters: + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ + return self.QuadrangleParameters(QUAD_REDUCED,UseExisting=UseExisting) - ## Defines "QuadrangleParams" hypothesis with QUAD_STANDARD type of quadrangulation - # @param vertex: vertex of a trilateral geometrical face, around which triangles - # will be created while other elements will be quadrangles. - # Vertex can be either a GEOM_Object or a vertex ID within the - # shape to mesh - # @param UseExisting: if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one - # @ingroup l3_hypos_quad def TriangleVertex(self, vertex, UseExisting=0): + """ + Defines "QuadrangleParams" hypothesis with QUAD_STANDARD type of quadrangulation + + Parameters: + vertex: vertex of a trilateral geometrical face, around which triangles + will be created while other elements will be quadrangles. + Vertex can be either a GEOM_Object or a vertex ID within the + shape to mesh + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ + return self.QuadrangleParameters(QUAD_STANDARD,vertex,UseExisting) pass # end of StdMeshersBuilder_Quadrangle class -## Defines a hexahedron 3D algorithm -# -# It is created by calling smeshBuilder.Mesh.Hexahedron(geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_Hexahedron(Mesh_Algorithm): + """ + Defines a hexahedron 3D algorithm + It is created by calling smeshBuilder.Mesh.Hexahedron(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Hexahedron" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = Hexa - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ isDefault = True - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ docHelper = "Creates hexahedron 3D algorithm for volumes" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, Hexa) pass pass # end of StdMeshersBuilder_Hexahedron class -## Defines a projection 1D algorithm -# -# It is created by calling smeshBuilder.Mesh.Projection1D(geom=0) -# -# @ingroup l3_algos_proj class StdMeshersBuilder_Projection1D(Mesh_Algorithm): + """ + Defines a projection 1D algorithm + It is created by calling smeshBuilder.Mesh.Projection1D(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Projection1D" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "Projection_1D" - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ isDefault = True - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ docHelper = "Creates projection 1D algorithm for edges" - - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape + """ + doc string of the method + """ def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, self.algoType) pass - ## Defines "Source Edge" hypothesis, specifying a meshed edge, from where - # a mesh pattern is taken, and, optionally, the association of vertices - # between the source edge and a target edge (to which a hypothesis is assigned) - # @param edge from which nodes distribution is taken - # @param mesh from which nodes distribution is taken (optional) - # @param srcV a vertex of \a edge to associate with \a tgtV (optional) - # @param tgtV a vertex of \a the edge to which the algorithm is assigned, - # to associate with \a srcV (optional) - # @param UseExisting if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one def SourceEdge(self, edge, mesh=None, srcV=None, tgtV=None, UseExisting=0): + """ + Defines "Source Edge" hypothesis, specifying a meshed edge, from where + a mesh pattern is taken, and, optionally, the association of vertices + between the source edge and a target edge (to which a hypothesis is assigned) + + Parameters: + edge: from which nodes distribution is taken + mesh: from which nodes distribution is taken (optional) + srcV: a vertex of *edge* to associate with *tgtV* (optional) + tgtV: a vertex of *the edge* to which the algorithm is assigned, to associate with *srcV* (optional) + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ from salome.smesh.smeshBuilder import AssureGeomPublished, Mesh AssureGeomPublished( self.mesh, edge ) AssureGeomPublished( self.mesh, srcV ) @@ -831,53 +969,65 @@ class StdMeshersBuilder_Projection1D(Mesh_Algorithm): pass # end of StdMeshersBuilder_Projection1D class -## Defines a projection 2D algorithm -# -# It is created by calling smeshBuilder.Mesh.Projection2D(geom=0) -# -# @ingroup l3_algos_proj class StdMeshersBuilder_Projection2D(Mesh_Algorithm): + """ + Defines a projection 2D algorithm + It is created by calling smeshBuilder.Mesh.Projection2D(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Projection2D" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "Projection_2D" - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ isDefault = True - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ docHelper = "Creates projection 2D algorithm for faces" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, self.algoType) pass - ## Defines "Source Face" hypothesis, specifying a meshed face, from where - # a mesh pattern is taken, and, optionally, the association of vertices - # between the source face and the target face (to which a hypothesis is assigned) - # @param face from which the mesh pattern is taken - # @param mesh from which the mesh pattern is taken (optional) - # @param srcV1 a vertex of \a face to associate with \a tgtV1 (optional) - # @param tgtV1 a vertex of \a the face to which the algorithm is assigned, - # to associate with \a srcV1 (optional) - # @param srcV2 a vertex of \a face to associate with \a tgtV1 (optional) - # @param tgtV2 a vertex of \a the face to which the algorithm is assigned, - # to associate with \a srcV2 (optional) - # @param UseExisting if ==true - forces the search for the existing hypothesis created with - # the same parameters, else (default) - forces the creation a new one - # - # Note: all association vertices must belong to one edge of a face + def SourceFace(self, face, mesh=None, srcV1=None, tgtV1=None, srcV2=None, tgtV2=None, UseExisting=0): + """ + Defines "Source Face" hypothesis, specifying a meshed face, from where + a mesh pattern is taken, and, optionally, the association of vertices + between the source face and the target face (to which a hypothesis is assigned) + + Parameters: + face: from which the mesh pattern is taken + mesh: from which the mesh pattern is taken (optional) + srcV1: a vertex of *face* to associate with *tgtV1* (optional) + tgtV1: a vertex of *the face* to which the algorithm is assigned, to associate with *srcV1* (optional) + srcV2: a vertex of *face* to associate with *tgtV1* (optional) + tgtV2: a vertex of *the face* to which the algorithm is assigned, to associate with *srcV2* (optional) + UseExisting: if ==true - forces the search for the existing hypothesis created with + he same parameters, else (default) - forces the creation a new one + + Note: + all association vertices must belong to one edge of a face + """ from salome.smesh.smeshBuilder import Mesh if isinstance(mesh, Mesh): mesh = mesh.GetMesh() @@ -896,76 +1046,93 @@ class StdMeshersBuilder_Projection2D(Mesh_Algorithm): pass # end of StdMeshersBuilder_Projection2D class -## Defines a projection 1D-2D algorithm -# -# It is created by calling smeshBuilder.Mesh.Projection1D2D(geom=0) -# -# @ingroup l3_algos_proj class StdMeshersBuilder_Projection1D2D(StdMeshersBuilder_Projection2D): - - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal - meshMethod = "Projection1D2D" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + Defines a projection 1D-2D algorithm + It is created by calling smeshBuilder.Mesh.Projection1D2D(geom=0) + """ + + + meshMethod = "Projection1D2D" + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "Projection_1D2D" - ## doc string of the method - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ docHelper = "Creates projection 1D-2D algorithm for faces" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ StdMeshersBuilder_Projection2D.__init__(self, mesh, geom) pass pass # end of StdMeshersBuilder_Projection1D2D class -## Defines a projection 3D algorithm -# -# It is created by calling smeshBuilder.Mesh.Projection3D(geom=0) -# -# @ingroup l3_algos_proj class StdMeshersBuilder_Projection3D(Mesh_Algorithm): + """ + Defines a projection 3D algorithm + It is created by calling smeshBuilder.Mesh.Projection3D(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Projection3D" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "Projection_3D" - ## doc string of the method - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ docHelper = "Creates projection 3D algorithm for volumes" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom" geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, self.algoType) pass - ## Defines the "Source Shape 3D" hypothesis, specifying a meshed solid, from where - # the mesh pattern is taken, and, optionally, the association of vertices - # between the source and the target solid (to which a hipothesis is assigned) - # @param solid from where the mesh pattern is taken - # @param mesh from where the mesh pattern is taken (optional) - # @param srcV1 a vertex of \a solid to associate with \a tgtV1 (optional) - # @param tgtV1 a vertex of \a the solid where the algorithm is assigned, - # to associate with \a srcV1 (optional) - # @param srcV2 a vertex of \a solid to associate with \a tgtV1 (optional) - # @param tgtV2 a vertex of \a the solid to which the algorithm is assigned, - # to associate with \a srcV2 (optional) - # @param UseExisting - if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one - # - # Note: association vertices must belong to one edge of a solid def SourceShape3D(self, solid, mesh=0, srcV1=0, tgtV1=0, srcV2=0, tgtV2=0, UseExisting=0): + """ + Defines the "Source Shape 3D" hypothesis, specifying a meshed solid, from where + the mesh pattern is taken, and, optionally, the association of vertices + between the source and the target solid (to which a hipothesis is assigned) + + Parameters: + solid: from where the mesh pattern is taken + mesh: from where the mesh pattern is taken (optional) + srcV1: a vertex of *solid* to associate with *tgtV1* (optional) + tgtV1: a vertex of *the solid* where the algorithm is assigned, to associate with *srcV1* (optional) + srcV2: a vertex of *solid* to associate with *tgtV1* (optional) + tgtV2: a vertex of *the solid* to which the algorithm is assigned,to associate with *srcV2* (optional) + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + + Note: + association vertices must belong to one edge of a solid + """ for geom in [ solid, srcV1, tgtV1, srcV2, tgtV2 ]: from salome.smesh.smeshBuilder import AssureGeomPublished AssureGeomPublished( self.mesh, geom ) @@ -987,33 +1154,40 @@ class StdMeshersBuilder_Projection3D(Mesh_Algorithm): pass # end of StdMeshersBuilder_Projection3D class -## Defines a Prism 3D algorithm, which is either "Extrusion 3D" or "Radial Prism" -# depending on geometry -# -# It is created by calling smeshBuilder.Mesh.Prism(geom=0) -# -# @ingroup l3_algos_3dextr class StdMeshersBuilder_Prism3D(Mesh_Algorithm): + """ + Defines a Prism 3D algorithm, which is either "Extrusion 3D" or "Radial Prism" depending on geometry + It is created by calling smeshBuilder.Mesh.Prism(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Prism" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "Prism_3D" - ## doc string of the method - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ docHelper = "Creates prism 3D algorithm for volumes" - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + doc string of the method + """ isDefault = True + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) shape = geom @@ -1031,16 +1205,24 @@ class StdMeshersBuilder_Prism3D(Mesh_Algorithm): pass pass - ## Return 3D hypothesis holding the 1D one def Get3DHypothesis(self): + """ + Returns: + 3D hypothesis holding the 1D one + """ if self.algoType != "RadialPrism_3D": print "Prism_3D algorith doesn't support any hyposesis" return None return self.distribHyp - ## Private method creating a 1D hypothesis and storing it in the LayerDistribution - # hypothesis. Returns the created hypothesis def OwnHypothesis(self, hypType, args=[], so="libStdMeshersEngine.so"): + """ + Private method creating a 1D hypothesis and storing it in the LayerDistribution + hypothesis. + + Returns: + the created hypothesis + """ if self.algoType != "RadialPrism_3D": print "Prism_3D algorith doesn't support any hyposesis" return None @@ -1056,12 +1238,16 @@ class StdMeshersBuilder_Prism3D(Mesh_Algorithm): self.distribHyp.SetLayerDistribution( hyp ) return hyp - ## Defines "NumberOfLayers" hypothesis, specifying the number of layers of - # prisms to build between the inner and outer shells - # @param n number of layers - # @param UseExisting if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one def NumberOfLayers(self, n, UseExisting=0): + """ + Defines "NumberOfLayers" hypothesis, specifying the number of layers of + prisms to build between the inner and outer shells + + Parameters: + n: number of layers + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ if self.algoType != "RadialPrism_3D": print "Prism_3D algorith doesn't support any hyposesis" return None @@ -1073,11 +1259,15 @@ class StdMeshersBuilder_Prism3D(Mesh_Algorithm): self.nbLayers.SetNumberOfLayers( n ) return self.nbLayers - ## Defines "LocalLength" hypothesis, specifying the segment length - # to build between the inner and the outer shells - # @param l the length of segments - # @param p the precision of rounding def LocalLength(self, l, p=1e-07): + """ + Defines "LocalLength" hypothesis, specifying the segment length + to build between the inner and the outer shells + + Parameters: + l: the length of segments + p: the precision of rounding + """ if self.algoType != "RadialPrism_3D": print "Prism_3D algorith doesn't support any hyposesis" return None @@ -1086,11 +1276,15 @@ class StdMeshersBuilder_Prism3D(Mesh_Algorithm): hyp.SetPrecision(p) return hyp - ## Defines "NumberOfSegments" hypothesis, specifying the number of layers of - # prisms to build between the inner and the outer shells. - # @param n the number of layers - # @param s the scale factor (optional) def NumberOfSegments(self, n, s=[]): + """ + Defines "NumberOfSegments" hypothesis, specifying the number of layers of + prisms to build between the inner and the outer shells. + + Parameters: + n: the number of layers + s: the scale factor (optional) + """ if self.algoType != "RadialPrism_3D": print "Prism_3D algorith doesn't support any hyposesis" return None @@ -1102,12 +1296,16 @@ class StdMeshersBuilder_Prism3D(Mesh_Algorithm): hyp.SetNumberOfSegments(n) return hyp - ## Defines "Arithmetic1D" hypothesis, specifying the distribution of segments - # to build between the inner and the outer shells with a length that changes - # in arithmetic progression - # @param start the length of the first segment - # @param end the length of the last segment def Arithmetic1D(self, start, end ): + """ + Defines "Arithmetic1D" hypothesis, specifying the distribution of segments + to build between the inner and the outer shells with a length that changes + in arithmetic progression + + Parameters: + start: the length of the first segment + end: the length of the last segment + """ if self.algoType != "RadialPrism_3D": print "Prism_3D algorith doesn't support any hyposesis" return None @@ -1116,12 +1314,16 @@ class StdMeshersBuilder_Prism3D(Mesh_Algorithm): hyp.SetLength(end , 0) return hyp - ## Defines "GeometricProgression" hypothesis, specifying the distribution of segments - # to build between the inner and the outer shells with a length that changes - # in Geometric progression - # @param start the length of the first segment - # @param ratio the common ratio of the geometric progression def GeometricProgression(self, start, ratio ): + """ + Defines "GeometricProgression" hypothesis, specifying the distribution of segments + to build between the inner and the outer shells with a length that changes + in Geometric progression + + Parameters: + start: the length of the first segment + ratio: the common ratio of the geometric progression + """ if self.algoType != "RadialPrism_3D": print "Prism_3D algorith doesn't support any hyposesis" return None @@ -1130,11 +1332,15 @@ class StdMeshersBuilder_Prism3D(Mesh_Algorithm): hyp.SetCommonRatio( ratio ) return hyp - ## Defines "StartEndLength" hypothesis, specifying distribution of segments - # to build between the inner and the outer shells as geometric length increasing - # @param start for the length of the first segment - # @param end for the length of the last segment def StartEndLength(self, start, end): + """ + Defines "StartEndLength" hypothesis, specifying distribution of segments + to build between the inner and the outer shells as geometric length increasing + + Parameters: + start: for the length of the first segment + end: for the length of the last segment + """ if self.algoType != "RadialPrism_3D": print "Prism_3D algorith doesn't support any hyposesis" return None @@ -1143,10 +1349,14 @@ class StdMeshersBuilder_Prism3D(Mesh_Algorithm): hyp.SetLength(end , 0) return hyp - ## Defines "AutomaticLength" hypothesis, specifying the number of segments - # to build between the inner and outer shells - # @param fineness defines the quality of the mesh within the range [0-1] def AutomaticLength(self, fineness=0): + """ + Defines "AutomaticLength" hypothesis, specifying the number of segments + to build between the inner and outer shells + + Parameters: + fineness: defines the quality of the mesh within the range [0-1] + """ if self.algoType != "RadialPrism_3D": print "Prism_3D algorith doesn't support any hyposesis" return None @@ -1156,28 +1366,35 @@ class StdMeshersBuilder_Prism3D(Mesh_Algorithm): pass # end of StdMeshersBuilder_Prism3D class -## Defines Radial Prism 3D algorithm -# -# It is created by calling smeshBuilder.Mesh.Prism(geom=0) -# -# @ingroup l3_algos_3dextr class StdMeshersBuilder_RadialPrism3D(StdMeshersBuilder_Prism3D): + """ + Defines Radial Prism 3D algorithm + It is created by calling smeshBuilder.Mesh.Prism(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Prism" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "RadialPrism_3D" - ## doc string of the method - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ docHelper = "Creates Raial Prism 3D algorithm for volumes" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) shape = geom @@ -1188,9 +1405,10 @@ class StdMeshersBuilder_RadialPrism3D(StdMeshersBuilder_Prism3D): self.nbLayers = None return -## Base class for algorithms supporting radial distribution hypotheses -# class StdMeshersBuilder_RadialAlgorithm(Mesh_Algorithm): + """ + Base class for algorithms supporting radial distribution hypotheses + """ def __init__(self): Mesh_Algorithm.__init__(self) @@ -1199,15 +1417,23 @@ class StdMeshersBuilder_RadialAlgorithm(Mesh_Algorithm): self.nbLayers = None pass - ## Return 2D hypothesis holding the 1D one def Get2DHypothesis(self): + """ + Returns: + 2D hypothesis holding the 1D one + """ if not self.distribHyp: self.distribHyp = self.Hypothesis("LayerDistribution2D", UseExisting=0) return self.distribHyp - ## Private method creating a 1D hypothesis and storing it in the LayerDistribution - # hypothesis. Returns the created hypothesis def OwnHypothesis(self, hypType, args=[], so="libStdMeshersEngine.so"): + """ + Private method creating a 1D hypothesis and storing it in the LayerDistribution + hypothesis. + + Returns: + the created hypothesis + """ if self.nbLayers: self.mesh.GetMesh().RemoveHypothesis( self.geom, self.nbLayers ) if self.distribHyp is None: @@ -1221,11 +1447,15 @@ class StdMeshersBuilder_RadialAlgorithm(Mesh_Algorithm): self.distribHyp.SetLayerDistribution( hyp ) return hyp - ## Defines "NumberOfLayers" hypothesis, specifying the number of layers - # @param n number of layers - # @param UseExisting if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one def NumberOfLayers(self, n, UseExisting=0): + """ + Defines "NumberOfLayers" hypothesis, specifying the number of layers + + Parameters: + n: number of layers + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ if self.distribHyp: self.mesh.GetMesh().RemoveHypothesis( self.geom, self.distribHyp ) from salome.smesh.smeshBuilder import IsEqual @@ -1235,19 +1465,27 @@ class StdMeshersBuilder_RadialAlgorithm(Mesh_Algorithm): self.nbLayers.SetNumberOfLayers( n ) return self.nbLayers - ## Defines "LocalLength" hypothesis, specifying the segment length - # @param l the length of segments - # @param p the precision of rounding def LocalLength(self, l, p=1e-07): + """ + Defines "LocalLength" hypothesis, specifying the segment length + + Parameters: + l: the length of segments + p: the precision of rounding + """ hyp = self.OwnHypothesis("LocalLength", [l,p]) hyp.SetLength(l) hyp.SetPrecision(p) return hyp - ## Defines "NumberOfSegments" hypothesis, specifying the number of layers - # @param n the number of layers - # @param s the scale factor (optional) def NumberOfSegments(self, n, s=[]): + """ + Defines "NumberOfSegments" hypothesis, specifying the number of layers + + Parameters: + n: the number of layers + s: the scale factor (optional) + """ if s == []: hyp = self.OwnHypothesis("NumberOfSegments", [n]) else: @@ -1257,67 +1495,89 @@ class StdMeshersBuilder_RadialAlgorithm(Mesh_Algorithm): hyp.SetNumberOfSegments(n) return hyp - ## Defines "Arithmetic1D" hypothesis, specifying the distribution of segments - # with a length that changes in arithmetic progression - # @param start the length of the first segment - # @param end the length of the last segment def Arithmetic1D(self, start, end ): + """ + Defines "Arithmetic1D" hypothesis, specifying the distribution of segments + with a length that changes in arithmetic progression + + Parameters: + start: the length of the first segment + end: the length of the last segment + """ hyp = self.OwnHypothesis("Arithmetic1D", [start, end]) hyp.SetLength(start, 1) hyp.SetLength(end , 0) return hyp - ## Defines "GeometricProgression" hypothesis, specifying the distribution of segments - # with a length that changes in Geometric progression - # @param start the length of the first segment - # @param ratio the common ratio of the geometric progression def GeometricProgression(self, start, ratio ): + """ + Defines "GeometricProgression" hypothesis, specifying the distribution of segments + with a length that changes in Geometric progression + + Parameters: + start: the length of the first segment + ratio: the common ratio of the geometric progression + """ hyp = self.OwnHypothesis("GeometricProgression", [start, ratio]) hyp.SetStartLength( start ) hyp.SetCommonRatio( ratio ) return hyp - ## Defines "StartEndLength" hypothesis, specifying distribution of segments - # as geometric length increasing - # @param start for the length of the first segment - # @param end for the length of the last segment def StartEndLength(self, start, end): + """ + Defines "StartEndLength" hypothesis, specifying distribution of segments + as geometric length increasing + + Parameters: + start: for the length of the first segment + end: for the length of the last segment + """ hyp = self.OwnHypothesis("StartEndLength", [start, end]) hyp.SetLength(start, 1) hyp.SetLength(end , 0) return hyp - ## Defines "AutomaticLength" hypothesis, specifying the number of segments - # @param fineness defines the quality of the mesh within the range [0-1] def AutomaticLength(self, fineness=0): + """ + Defines "AutomaticLength" hypothesis, specifying the number of segments + + Parameters: + fineness: defines the quality of the mesh within the range [0-1] + """ hyp = self.OwnHypothesis("AutomaticLength") hyp.SetFineness( fineness ) return hyp pass # end of StdMeshersBuilder_RadialQuadrangle1D2D class -## Defines a Radial Quadrangle 1D-2D algorithm -# -# It is created by calling smeshBuilder.Mesh.Quadrangle(smeshBuilder.RADIAL_QUAD,geom=0) -# -# @ingroup l2_algos_radialq class StdMeshersBuilder_RadialQuadrangle1D2D(StdMeshersBuilder_RadialAlgorithm): + """ + Defines a Radial Quadrangle 1D-2D algorithm + It is created by calling smeshBuilder.Mesh.Quadrangle(smeshBuilder.RADIAL_QUAD,geom=0) + """ - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Quadrangle" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = RADIAL_QUAD - ## doc string of the method - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ docHelper = "Creates quadrangle 1D-2D algorithm for faces having a shape of disk or a disk segment" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ StdMeshersBuilder_RadialAlgorithm.__init__(self) self.Create(mesh, geom, self.algoType) @@ -1326,103 +1586,127 @@ class StdMeshersBuilder_RadialQuadrangle1D2D(StdMeshersBuilder_RadialAlgorithm): pass -## Defines a Quadrangle (Medial Axis Projection) 1D-2D algorithm -# -# It is created by calling smeshBuilder.Mesh.Quadrangle(smeshBuilder.QUAD_MA_PROJ,geom=0) -# -# @ingroup l2_algos_quad_ma class StdMeshersBuilder_QuadMA_1D2D(StdMeshersBuilder_RadialAlgorithm): + """ + Defines a Quadrangle (Medial Axis Projection) 1D-2D algorithm + It is created by calling smeshBuilder.Mesh.Quadrangle(smeshBuilder.QUAD_MA_PROJ,geom=0) + """ - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Quadrangle" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = QUAD_MA_PROJ - ## doc string of the method - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ docHelper = "Creates quadrangle 1D-2D algorithm for faces" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ StdMeshersBuilder_RadialAlgorithm.__init__(self) self.Create(mesh, geom, self.algoType) pass pass -## Defines a Polygon Per Face 2D algorithm -# -# It is created by calling smeshBuilder.Mesh.Polygon(geom=0) -# -# @ingroup l2_algos_quad_ma class StdMeshersBuilder_PolygonPerFace(Mesh_Algorithm): + """ Defines a Polygon Per Face 2D algorithm + It is created by calling smeshBuilder.Mesh.Polygon(geom=0) + """ - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "Polygon" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = POLYGON - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ isDefault = True - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ docHelper = "Creates polygon 2D algorithm for faces" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, self.algoType) pass pass -## Defines a Use Existing Elements 1D algorithm -# -# It is created by calling smeshBuilder.Mesh.UseExisting1DElements(geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_UseExistingElements_1D(Mesh_Algorithm): + """ Defines a Use Existing Elements 1D algorithm + + It is created by calling smeshBuilder.Mesh.UseExisting1DElements(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "UseExisting1DElements" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "Import_1D" - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ isDefault = True - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ docHelper = "Creates 1D algorithm for edges with reusing of existing mesh elements" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, self.algoType) pass - ## Defines "Source edges" hypothesis, specifying groups of edges to import - # @param groups list of groups of edges - # @param toCopyMesh if True, the whole mesh \a groups belong to is imported - # @param toCopyGroups if True, all groups of the mesh \a groups belong to are imported - # @param UseExisting if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one def SourceEdges(self, groups, toCopyMesh=False, toCopyGroups=False, UseExisting=False): + """ + Defines "Source edges" hypothesis, specifying groups of edges to import + + Parameters: + groups: list of groups of edges + toCopyMesh: if True, the whole mesh *groups* belong to is imported + toCopyGroups: if True, all groups of the mesh *groups* belong to are imported + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ for group in groups: from salome.smesh.smeshBuilder import AssureGeomPublished AssureGeomPublished( self.mesh, group ) @@ -1436,43 +1720,55 @@ class StdMeshersBuilder_UseExistingElements_1D(Mesh_Algorithm): pass # end of StdMeshersBuilder_UseExistingElements_1D class -## Defines a Use Existing Elements 1D-2D algorithm -# -# It is created by calling smeshBuilder.Mesh.UseExisting2DElements(geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_UseExistingElements_1D2D(Mesh_Algorithm): + """ Defines a Use Existing Elements 1D-2D algorithm + + It is created by calling smeshBuilder.Mesh.UseExisting2DElements(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "UseExisting2DElements" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "Import_1D2D" - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ isDefault = True - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ docHelper = "Creates 1D-2D algorithm for faces with reusing of existing mesh elements" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ Mesh_Algorithm.__init__(self) self.Create(mesh, geom, self.algoType) pass - ## Defines "Source faces" hypothesis, specifying groups of faces to import - # @param groups list of groups of faces - # @param toCopyMesh if True, the whole mesh \a groups belong to is imported - # @param toCopyGroups if True, all groups of the mesh \a groups belong to are imported - # @param UseExisting if ==true - searches for the existing hypothesis created with - # the same parameters, else (default) - creates a new one def SourceFaces(self, groups, toCopyMesh=False, toCopyGroups=False, UseExisting=False): + """ + Defines "Source faces" hypothesis, specifying groups of faces to import + + Parameters: + groups: list of groups of faces + toCopyMesh: if True, the whole mesh *groups* belong to is imported + toCopyGroups: if True, all groups of the mesh *groups* belong to are imported + UseExisting: if ==true - searches for the existing hypothesis created with + the same parameters, else (default) - creates a new one + """ import SMESH compFun = lambda hyp, args: ( hyp.GetSourceFaces() == args[0] and \ hyp.GetCopySourceMesh() == args[1], args[2] ) @@ -1487,54 +1783,70 @@ class StdMeshersBuilder_UseExistingElements_1D2D(Mesh_Algorithm): pass # end of StdMeshersBuilder_UseExistingElements_1D2D class -## Defines a Body Fitting 3D algorithm -# -# It is created by calling smeshBuilder.Mesh.BodyFitted(geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_Cartesian_3D(Mesh_Algorithm): + """ Defines a Body Fitting 3D algorithm + + It is created by calling smeshBuilder.Mesh.BodyFitted(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "BodyFitted" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "Cartesian_3D" - ## flag pointing whether this algorithm should be used by default in dynamic method - # of smeshBuilder.Mesh class - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ isDefault = True - ## doc string of the method - # @internal + """ + flag pointing whether this algorithm should be used by default in dynamic method + of smeshBuilder.Mesh class + """ docHelper = "Creates Body Fitting 3D algorithm for volumes" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ self.Create(mesh, geom, self.algoType) self.hyp = None pass - ## Defines "Body Fitting parameters" hypothesis - # @param xGridDef is definition of the grid along the X asix. - # It can be in either of two following forms: - # - Explicit coordinates of nodes, e.g. [-1.5, 0.0, 3.1] or range( -100,200,10) - # - Functions f(t) defining grid spacing at each point on grid axis. If there are - # several functions, they must be accompanied by relative coordinates of - # points dividing the whole shape into ranges where the functions apply; points - # coodrinates should vary within (0.0, 1.0) range. Parameter \a t of the spacing - # function f(t) varies from 0.0 to 1.0 within a shape range. - # Examples: - # - "10.5" - defines a grid with a constant spacing - # - [["1", "1+10*t", "11"] [0.1, 0.6]] - defines different spacing in 3 ranges. - # @param yGridDef defines the grid along the Y asix the same way as \a xGridDef does. - # @param zGridDef defines the grid along the Z asix the same way as \a xGridDef does. - # @param sizeThreshold (> 1.0) defines a minimal size of a polyhedron so that - # a polyhedron of size less than hexSize/sizeThreshold is not created. - # @param implEdges enables implementation of geometrical edges into the mesh. def SetGrid(self, xGridDef, yGridDef, zGridDef, sizeThreshold=4.0, implEdges=False): + """ + Defines "Body Fitting parameters" hypothesis + + Parameters: + xGridDef: is definition of the grid along the X asix. + It can be in either of two following forms: + + - Explicit coordinates of nodes, e.g. [-1.5, 0.0, 3.1] or range( -100,200,10) + - Functions f(t) defining grid spacing at each point on grid axis. If there are + several functions, they must be accompanied by relative coordinates of + points dividing the whole shape into ranges where the functions apply; points + coodrinates should vary within (0.0, 1.0) range. Parameter *t* of the spacing + function f(t) varies from 0.0 to 1.0 within a shape range. + + Examples: + "10.5" - defines a grid with a constant spacing + [["1", "1+10*t", "11"] [0.1, 0.6]] - defines different spacing in 3 ranges. + + Parameters: + yGridDef: defines the grid along the Y asix the same way as *xGridDef* does. + zGridDef: defines the grid along the Z asix the same way as *xGridDef* does. + sizeThreshold: (> 1.0) defines a minimal size of a polyhedron so that + a polyhedron of size less than hexSize/sizeThreshold is not created. + implEdges: enables implementation of geometrical edges into the mesh. + """ if not self.hyp: compFun = lambda hyp, args: False self.hyp = self.Hypothesis("CartesianParameters3D", @@ -1558,11 +1870,15 @@ class StdMeshersBuilder_Cartesian_3D(Mesh_Algorithm): self.hyp.SetToAddEdges( implEdges ) return self.hyp - ## Defines custom directions of axes of the grid - # @param xAxis either SMESH.DirStruct or a vector, or 3 vector components - # @param yAxis either SMESH.DirStruct or a vector, or 3 vector components - # @param zAxis either SMESH.DirStruct or a vector, or 3 vector components def SetAxesDirs( self, xAxis, yAxis, zAxis ): + """ + Defines custom directions of axes of the grid + + Parameters: + xAxis: either SMESH.DirStruct or a vector, or 3 vector components + yAxis: either SMESH.DirStruct or a vector, or 3 vector components + zAxis: either SMESH.DirStruct or a vector, or 3 vector components + """ import GEOM if hasattr( xAxis, "__getitem__" ): xAxis = self.mesh.smeshpyD.MakeDirStruct( xAxis[0],xAxis[1],xAxis[2] ) @@ -1583,10 +1899,14 @@ class StdMeshersBuilder_Cartesian_3D(Mesh_Algorithm): self.hyp.SetAxesDirs( xAxis, yAxis, zAxis ) return self.hyp - ## Automatically defines directions of axes of the grid at which - # a number of generated hexahedra is maximal - # @param isOrthogonal defines whether the axes mush be orthogonal def SetOptimalAxesDirs(self, isOrthogonal=True): + """ + Automatically defines directions of axes of the grid at which + a number of generated hexahedra is maximal + + Parameters: + isOrthogonal: defines whether the axes mush be orthogonal + """ if not self.hyp: self.hyp = self.Hypothesis("CartesianParameters3D") if not self.mesh.IsUsedHypothesis( self.hyp, self.geom ): @@ -1595,13 +1915,17 @@ class StdMeshersBuilder_Cartesian_3D(Mesh_Algorithm): self.hyp.SetAxesDirs( x,y,z ) return self.hyp - ## Sets/unsets a fixed point. The algorithm makes a plane of the grid pass - # through the fixed point in each direction at which the grid is defined - # by spacing - # @param p coordinates of the fixed point. Either SMESH.PointStruct or - # a vertex or 3 components of coordinates. - # @param toUnset defines whether the fixed point is defined or removed. def SetFixedPoint( self, p, toUnset=False ): + """ + Sets/unsets a fixed point. The algorithm makes a plane of the grid pass + through the fixed point in each direction at which the grid is defined + by spacing + + Parameters: + p: coordinates of the fixed point. Either SMESH.PointStruct or + a vertex or 3 components of coordinates. + toUnset: defines whether the fixed point is defined or removed. + """ import SMESH, GEOM if toUnset: if not self.hyp: return @@ -1620,57 +1944,71 @@ class StdMeshersBuilder_Cartesian_3D(Mesh_Algorithm): pass # end of StdMeshersBuilder_Cartesian_3D class -## Defines a stub 1D algorithm, which enables "manual" creation of nodes and -# segments usable by 2D algorithms -# -# It is created by calling smeshBuilder.Mesh.UseExistingSegments(geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_UseExisting_1D(Mesh_Algorithm): + """ Defines a stub 1D algorithm, which enables "manual" creation of nodes and + segments usable by 2D algorithms + + It is created by calling smeshBuilder.Mesh.UseExistingSegments(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "UseExistingSegments" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "UseExisting_1D" - ## doc string of the method - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ docHelper = "Creates 1D algorithm allowing batch meshing of edges" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ self.Create(mesh, geom, self.algoType) pass pass # end of StdMeshersBuilder_UseExisting_1D class -## Defines a stub 2D algorithm, which enables "manual" creation of nodes and -# faces usable by 3D algorithms -# -# It is created by calling smeshBuilder.Mesh.UseExistingFaces(geom=0) -# -# @ingroup l3_algos_basic class StdMeshersBuilder_UseExisting_2D(Mesh_Algorithm): + """ Defines a stub 2D algorithm, which enables "manual" creation of nodes and + faces usable by 3D algorithms + + It is created by calling smeshBuilder.Mesh.UseExistingFaces(geom=0) + """ + - ## name of the dynamic method in smeshBuilder.Mesh class - # @internal meshMethod = "UseExistingFaces" - ## type of algorithm used with helper function in smeshBuilder.Mesh class - # @internal + """ + name of the dynamic method in smeshBuilder.Mesh class + """ algoType = "UseExisting_2D" - ## doc string of the method - # @internal + """ + type of algorithm used with helper function in smeshBuilder.Mesh class + """ docHelper = "Creates 2D algorithm allowing batch meshing of faces" + """ + doc string of the method + """ - ## Private constructor. - # @param mesh parent mesh object algorithm is assigned to - # @param geom geometry (shape/sub-shape) algorithm is assigned to; - # if it is @c 0 (default), the algorithm is assigned to the main shape def __init__(self, mesh, geom=0): + """ + Private constructor. + + Parameters: + mesh: parent mesh object algorithm is assigned to + geom: geometry (shape/sub-shape) algorithm is assigned to; + if it is :code:`0` (default), the algorithm is assigned to the main shape + """ self.Create(mesh, geom, self.algoType) pass diff --git a/src/SMESH_SWIG/smeshBuilder.py b/src/SMESH_SWIG/smeshBuilder.py index 26f16b06b..0553145f3 100644 --- a/src/SMESH_SWIG/smeshBuilder.py +++ b/src/SMESH_SWIG/smeshBuilder.py @@ -91,9 +91,9 @@ import SALOME import SALOMEDS import os -## Private class used to workaround a problem that sometimes isinstance(m, Mesh) returns False -# class MeshMeta(type): + """Private class used to workaround a problem that sometimes isinstance(m, Mesh) returns False + """ def __instancecheck__(cls, inst): """Implement isinstance(inst, cls).""" return any(cls.__subclasscheck__(c) @@ -106,8 +106,9 @@ class MeshMeta(type): ## @addtogroup l1_auxiliary ## @{ -## Convert an angle from degrees to radians def DegreesToRadians(AngleInDegrees): + """Convert an angle from degrees to radians + """ from math import pi return AngleInDegrees * pi / 180.0 @@ -116,9 +117,11 @@ notebook = salome_notebook.notebook # Salome notebook variable separator var_separator = ":" -## Return list of variable values from salome notebook. -# The last argument, if is callable, is used to modify values got from notebook def ParseParameters(*args): + """ + Return list of variable values from salome notebook. + The last argument, if is callable, is used to modify values got from notebook + """ Result = [] Parameters = "" hasVariables = False @@ -147,20 +150,26 @@ def ParseParameters(*args): Result.append( hasVariables ) return Result -## Parse parameters while converting variables to radians def ParseAngles(*args): + """ + Parse parameters while converting variables to radians + """ return ParseParameters( *( args + (DegreesToRadians, ))) -## Substitute PointStruct.__init__() to create SMESH.PointStruct using notebook variables. -# Parameters are stored in PointStruct.parameters attribute def __initPointStruct(point,*args): + """ + Substitute PointStruct.__init__() to create SMESH.PointStruct using notebook variables. + Parameters are stored in PointStruct.parameters attribute + """ point.x, point.y, point.z, point.parameters,hasVars = ParseParameters(*args) pass SMESH.PointStruct.__init__ = __initPointStruct -## Substitute AxisStruct.__init__() to create SMESH.AxisStruct using notebook variables. -# Parameters are stored in AxisStruct.parameters attribute def __initAxisStruct(ax,*args): + """ + Substitute AxisStruct.__init__() to create SMESH.AxisStruct using notebook variables. + Parameters are stored in AxisStruct.parameters attribute + """ if len( args ) != 6: raise RuntimeError,\ "Bad nb args (%s) passed in SMESH.AxisStruct(x,y,z,dx,dy,dz)"%(len( args )) @@ -169,16 +178,20 @@ def __initAxisStruct(ax,*args): SMESH.AxisStruct.__init__ = __initAxisStruct smeshPrecisionConfusion = 1.e-07 -## Compare real values using smeshPrecisionConfusion as tolerance def IsEqual(val1, val2, tol=smeshPrecisionConfusion): + """Compare real values using smeshPrecisionConfusion as tolerance + """ if abs(val1 - val2) < tol: return True return False NO_NAME = "NoName" -## Return object name def GetName(obj): + """ + Returns: + object name + """ if obj: # object not null if isinstance(obj, SALOMEDS._objref_SObject): @@ -210,8 +223,10 @@ def GetName(obj): pass raise RuntimeError, "Null or invalid object" -## Print error message if a hypothesis was not assigned. def TreatHypoStatus(status, hypName, geomName, isAlgo, mesh): + """ + Print error message if a hypothesis was not assigned. + """ if isAlgo: hypType = "algorithm" else: @@ -262,8 +277,10 @@ def TreatHypoStatus(status, hypName, geomName, isAlgo, mesh): print '"%s" was not assigned : %s' %( hypName, reason ) pass -## Private method. Add geom (sub-shape of the main shape) into the study if not yet there def AssureGeomPublished(mesh, geom, name=''): + """ + Private method. Add geom (sub-shape of the main shape) into the study if not yet there + """ if not isinstance( geom, geomBuilder.GEOM._objref_GEOM_Object ): return if not geom.GetStudyEntry() and \ @@ -282,8 +299,11 @@ def AssureGeomPublished(mesh, geom, name=''): mesh.geompyD.addToStudyInFather( mesh.geom, geom, name ) return -## Return the first vertex of a geometrical edge by ignoring orientation def FirstVertexOnCurve(mesh, edge): + """ + Returns: + the first vertex of a geometrical edge by ignoring orientation + """ vv = mesh.geompyD.SubShapeAll( edge, geomBuilder.geomBuilder.ShapeType["VERTEX"]) if not vv: raise TypeError, "Given object has no vertices" @@ -305,16 +325,21 @@ def FirstVertexOnCurve(mesh, edge): ## @} -# Warning: smeshInst is a singleton smeshInst = None +""" +Warning: + smeshInst is a singleton +""" engine = None doLcc = False created = False -## This class allows to create, load or manipulate meshes. -# It has a set of methods to create, load or copy meshes, to combine several meshes, etc. -# It also has methods to get infos and measure meshes. class smeshBuilder(object, SMESH._objref_SMESH_Gen): + """ + This class allows to create, load or manipulate meshes. + It has a set of methods to create, load or copy meshes, to combine several meshes, etc. + It also has methods to get infos and measure meshes. + """ # MirrorType enumeration POINT = SMESH_MeshEditor.POINT @@ -377,56 +402,74 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): created = True SMESH._objref_SMESH_Gen.__init__(self) - ## Dump component to the Python script - # This method overrides IDL function to allow default values for the parameters. - # @ingroup l1_auxiliary def DumpPython(self, theStudy, theIsPublished=True, theIsMultiFile=True): + """ + Dump component to the Python script + This method overrides IDL function to allow default values for the parameters. + """ + return SMESH._objref_SMESH_Gen.DumpPython(self, theStudy, theIsPublished, theIsMultiFile) - ## Set mode of DumpPython(), \a historical or \a snapshot. - # In the \a historical mode, the Python Dump script includes all commands - # performed by SMESH engine. In the \a snapshot mode, commands - # relating to objects removed from the Study are excluded from the script - # as well as commands not influencing the current state of meshes - # @ingroup l1_auxiliary def SetDumpPythonHistorical(self, isHistorical): + """ + Set mode of DumpPython(), *historical* or *snapshot*. + In the *historical* mode, the Python Dump script includes all commands + performed by SMESH engine. In the *snapshot* mode, commands + relating to objects removed from the Study are excluded from the script + as well as commands not influencing the current state of meshes + """ + if isHistorical: val = "true" else: val = "false" SMESH._objref_SMESH_Gen.SetOption(self, "historical_python_dump", val) - ## Set the current study and Geometry component - # @ingroup l1_auxiliary def init_smesh(self,theStudy,geompyD = None): + """ + Set the current study and Geometry component + """ + #print "init_smesh" self.SetCurrentStudy(theStudy,geompyD) if theStudy: global notebook notebook.myStudy = theStudy - ## Create a mesh. This can be either an empty mesh, possibly having an underlying geometry, - # or a mesh wrapping a CORBA mesh given as a parameter. - # @param obj either (1) a CORBA mesh (SMESH._objref_SMESH_Mesh) got e.g. by calling - # salome.myStudy.FindObjectID("0:1:2:3").GetObject() or - # (2) a Geometrical object for meshing or - # (3) none. - # @param name the name for the new mesh. - # @return an instance of Mesh class. - # @ingroup l2_construct def Mesh(self, obj=0, name=0): + """ + Create a mesh. This can be either an empty mesh, possibly having an underlying geometry, + or a mesh wrapping a CORBA mesh given as a parameter. + + Parameters: + obj: either (1) a CORBA mesh: (SMESH._objref_SMESH_Mesh) got e.g. by calling + salome.myStudy.FindObjectID("0:1:2:3").GetObject() or + (2) a Geometrical object: for meshing or (3) none:. + name: the name for the new mesh. + + Returns: + an instance of Mesh class. + """ + if isinstance(obj,str): obj,name = name,obj return Mesh(self,self.geompyD,obj,name) - ## Return a long value from enumeration - # @ingroup l1_auxiliary def EnumToLong(self,theItem): + """ + Return a long value from enumeration + """ + return theItem._v - ## Return a string representation of the color. - # To be used with filters. - # @param c color value (SALOMEDS.Color) - # @ingroup l1_auxiliary def ColorToString(self,c): + """ + Returns: + a string representation of the color. + To be used with filters. + + Parametrs: + c: color value (SALOMEDS.Color) + """ + val = "" if isinstance(c, SALOMEDS.Color): val = "%s;%s;%s" % (c.R, c.G, c.B) @@ -436,19 +479,31 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): raise ValueError, "Color value should be of string or SALOMEDS.Color type" return val - ## Get PointStruct from vertex - # @param theVertex a GEOM object(vertex) - # @return SMESH.PointStruct - # @ingroup l1_auxiliary def GetPointStruct(self,theVertex): + """ + Get PointStruct from vertex + + Parameters: + theVertex: a GEOM object(vertex) + + Returns: + SMESH.PointStruct + """ + [x, y, z] = self.geompyD.PointCoordinates(theVertex) return PointStruct(x,y,z) - ## Get DirStruct from vector - # @param theVector a GEOM object(vector) - # @return SMESH.DirStruct - # @ingroup l1_auxiliary def GetDirStruct(self,theVector): + """ + Get DirStruct from vector + + Parameters: + theVector: a GEOM object(vector) + + Returns: + SMESH.DirStruct + """ + vertices = self.geompyD.SubShapeAll( theVector, geomBuilder.geomBuilder.ShapeType["VERTEX"] ) if(len(vertices) != 2): print "Error: vector object is incorrect." @@ -459,19 +514,28 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): dirst = DirStruct(pnt) return dirst - ## Make DirStruct from a triplet - # @param x,y,z vector components - # @return SMESH.DirStruct - # @ingroup l1_auxiliary def MakeDirStruct(self,x,y,z): + """ + Make DirStruct from a triplet + + Parameters: + x,y,z: vector components + + Returns: + SMESH.DirStruct + """ + pnt = PointStruct(x,y,z) return DirStruct(pnt) def GetAxisStruct(self,theObj): """ Get AxisStruct from object - Parameters: - theObj a GEOM object (line or plane) + + Parameters: + theObj: a GEOM object (line or plane) + + Returns: SMESH.AxisStruct """ import GEOM @@ -504,11 +568,15 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): # From SMESH_Gen interface: # ------------------------ - ## Set the given name to the object - # @param obj the object to rename - # @param name a new object name - # @ingroup l1_auxiliary def SetName(self, obj, name): + """ + Set the given name to the object + + Parameters: + obj: the object to rename + name: a new object name + """ + if isinstance( obj, Mesh ): obj = obj.GetMesh() elif isinstance( obj, Mesh_Algorithm ): @@ -516,20 +584,26 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): ior = salome.orb.object_to_string(obj) SMESH._objref_SMESH_Gen.SetName(self, ior, name) - ## Set the current mode - # @ingroup l1_auxiliary def SetEmbeddedMode( self,theMode ): + """ + Set the current mode + """ + SMESH._objref_SMESH_Gen.SetEmbeddedMode(self,theMode) - ## Get the current mode - # @ingroup l1_auxiliary def IsEmbeddedMode(self): + """ + Get the current mode + """ + return SMESH._objref_SMESH_Gen.IsEmbeddedMode(self) - ## Set the current study. Calling SetCurrentStudy( None ) allows to - # switch OFF automatic pubilishing in the Study of mesh objects. - # @ingroup l1_auxiliary def SetCurrentStudy( self, theStudy, geompyD = None ): + """ + Set the current study. Calling SetCurrentStudy( None ) allows to + switch OFF automatic pubilishing in the Study of mesh objects. + """ + if not geompyD: from salome.geom import geomBuilder geompyD = geomBuilder.geom @@ -549,76 +623,108 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): pass pass - ## Get the current study - # @ingroup l1_auxiliary def GetCurrentStudy(self): + """ + Get the current study + """ + return SMESH._objref_SMESH_Gen.GetCurrentStudy(self) - ## Create a Mesh object importing data from the given UNV file - # @return an instance of Mesh class - # @ingroup l2_impexp def CreateMeshesFromUNV( self,theFileName ): + """ + Create a Mesh object importing data from the given UNV file + + Returns: + an instance of Mesh class + """ + aSmeshMesh = SMESH._objref_SMESH_Gen.CreateMeshesFromUNV(self,theFileName) aMesh = Mesh(self, self.geompyD, aSmeshMesh) return aMesh - ## Create a Mesh object(s) importing data from the given MED file - # @return a tuple ( list of Mesh class instances, SMESH.DriverMED_ReadStatus ) - # @ingroup l2_impexp def CreateMeshesFromMED( self,theFileName ): + """ + Create a Mesh object(s) importing data from the given MED file + + Returns: + a tuple ( list of Mesh class instances, SMESH.DriverMED_ReadStatus ) + """ + aSmeshMeshes, aStatus = SMESH._objref_SMESH_Gen.CreateMeshesFromMED(self,theFileName) aMeshes = [ Mesh(self, self.geompyD, m) for m in aSmeshMeshes ] return aMeshes, aStatus - ## Create a Mesh object(s) importing data from the given SAUV file - # @return a tuple ( list of Mesh class instances, SMESH.DriverMED_ReadStatus ) - # @ingroup l2_impexp def CreateMeshesFromSAUV( self,theFileName ): + """ + Create a Mesh object(s) importing data from the given SAUV file + + Returns: + a tuple ( list of Mesh class instances, SMESH.DriverMED_ReadStatus ) + """ + aSmeshMeshes, aStatus = SMESH._objref_SMESH_Gen.CreateMeshesFromSAUV(self,theFileName) aMeshes = [ Mesh(self, self.geompyD, m) for m in aSmeshMeshes ] return aMeshes, aStatus - ## Create a Mesh object importing data from the given STL file - # @return an instance of Mesh class - # @ingroup l2_impexp def CreateMeshesFromSTL( self, theFileName ): + """ + Create a Mesh object importing data from the given STL file + + Returns: + an instance of Mesh class + """ + aSmeshMesh = SMESH._objref_SMESH_Gen.CreateMeshesFromSTL(self,theFileName) aMesh = Mesh(self, self.geompyD, aSmeshMesh) return aMesh - ## Create Mesh objects importing data from the given CGNS file - # @return a tuple ( list of Mesh class instances, SMESH.DriverMED_ReadStatus ) - # @ingroup l2_impexp def CreateMeshesFromCGNS( self, theFileName ): + """ + Create Mesh objects importing data from the given CGNS file + + Returns: + a tuple ( list of Mesh class instances, SMESH.DriverMED_ReadStatus ) + """ + aSmeshMeshes, aStatus = SMESH._objref_SMESH_Gen.CreateMeshesFromCGNS(self,theFileName) aMeshes = [ Mesh(self, self.geompyD, m) for m in aSmeshMeshes ] return aMeshes, aStatus - ## Create a Mesh object importing data from the given GMF file. - # GMF files must have .mesh extension for the ASCII format and .meshb for - # the binary format. - # @return [ an instance of Mesh class, SMESH.ComputeError ] - # @ingroup l2_impexp def CreateMeshesFromGMF( self, theFileName ): + """ + Create a Mesh object importing data from the given GMF file. + GMF files must have .mesh extension for the ASCII format and .meshb for + the binary format. + + Returns: + [ an instance of Mesh class, SMESH.ComputeError ] + """ + aSmeshMesh, error = SMESH._objref_SMESH_Gen.CreateMeshesFromGMF(self, theFileName, True) if error.comment: print "*** CreateMeshesFromGMF() errors:\n", error.comment return Mesh(self, self.geompyD, aSmeshMesh), error - ## Concatenate the given meshes into one mesh. All groups of input meshes will be - # present in the new mesh. - # @param meshes the meshes, sub-meshes and groups to combine into one mesh - # @param uniteIdenticalGroups if true, groups with same names are united, else they are renamed - # @param mergeNodesAndElements if true, equal nodes and elements are merged - # @param mergeTolerance tolerance for merging nodes - # @param allGroups forces creation of groups corresponding to every input mesh - # @param name name of a new mesh - # @return an instance of Mesh class - # @ingroup l1_creating def Concatenate( self, meshes, uniteIdenticalGroups, mergeNodesAndElements = False, mergeTolerance = 1e-5, allGroups = False, name = ""): + """ + Concatenate the given meshes into one mesh. All groups of input meshes will be + present in the new mesh. + + Parameters: + meshes: the meshes, sub-meshes and groups to combine into one mesh + uniteIdenticalGroups: if true, groups with same names are united, else they are renamed + mergeNodesAndElements: if true, equal nodes and elements are merged + mergeTolerance: tolerance for merging nodes + allGroups: forces creation of groups corresponding to every input mesh + name: name of a new mesh + + Returns: + an instance of Mesh class + """ + if not meshes: return None for i,m in enumerate(meshes): if isinstance(m, Mesh): @@ -634,49 +740,69 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): aMesh = Mesh(self, self.geompyD, aSmeshMesh, name=name) return aMesh - ## Create a mesh by copying a part of another mesh. - # @param meshPart a part of mesh to copy, either a Mesh, a sub-mesh or a group; - # to copy nodes or elements not contained in any mesh object, - # pass result of Mesh.GetIDSource( list_of_ids, type ) as meshPart - # @param meshName a name of the new mesh - # @param toCopyGroups to create in the new mesh groups the copied elements belongs to - # @param toKeepIDs to preserve order of the copied elements or not - # @return an instance of Mesh class - # @ingroup l1_creating def CopyMesh( self, meshPart, meshName, toCopyGroups=False, toKeepIDs=False): + """ + Create a mesh by copying a part of another mesh. + + Parameters: + meshPart: a part of mesh to copy, either a Mesh, a sub-mesh or a group; + to copy nodes or elements not contained in any mesh object, + pass result of Mesh.GetIDSource( list_of_ids, type ) as meshPart + meshName: a name of the new mesh + toCopyGroups: to create in the new mesh groups the copied elements belongs to + toKeepIDs: to preserve order of the copied elements or not + + Returns: + an instance of Mesh class + """ + if (isinstance( meshPart, Mesh )): meshPart = meshPart.GetMesh() mesh = SMESH._objref_SMESH_Gen.CopyMesh( self,meshPart,meshName,toCopyGroups,toKeepIDs ) return Mesh(self, self.geompyD, mesh) - ## Return IDs of sub-shapes - # @return the list of integer values - # @ingroup l1_auxiliary def GetSubShapesId( self, theMainObject, theListOfSubObjects ): + """ + Return IDs of sub-shapes + + Returns: + the list of integer values + """ + return SMESH._objref_SMESH_Gen.GetSubShapesId(self,theMainObject, theListOfSubObjects) - ## Create a pattern mapper. - # @return an instance of SMESH_Pattern - # - # Example of Patterns usage - # @ingroup l1_modifying def GetPattern(self): + """ + Create a pattern mapper. + + Returns: + an instance of SMESH_Pattern + + `Example of Patterns usage <../tui_modifying_meshes_page.html#tui_pattern_mapping>`_ + """ + return SMESH._objref_SMESH_Gen.GetPattern(self) - ## Set number of segments per diagonal of boundary box of geometry, by which - # default segment length of appropriate 1D hypotheses is defined in GUI. - # Default value is 10. - # @ingroup l1_auxiliary def SetBoundaryBoxSegmentation(self, nbSegments): + """ + Set number of segments per diagonal of boundary box of geometry, by which + default segment length of appropriate 1D hypotheses is defined in GUI. + Default value is 10. + """ + SMESH._objref_SMESH_Gen.SetBoundaryBoxSegmentation(self,nbSegments) # Filtering. Auxiliary functions: # ------------------------------ - ## Create an empty criterion - # @return SMESH.Filter.Criterion - # @ingroup l1_controls def GetEmptyCriterion(self): + """ + Create an empty criterion + + Returns: + SMESH.Filter.Criterion + """ + Type = self.EnumToLong(FT_Undefined) Compare = self.EnumToLong(FT_Undefined) Threshold = 0 @@ -690,23 +816,6 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): return Filter.Criterion(Type, Compare, Threshold, ThresholdStr, ThresholdID, UnaryOp, BinaryOp, Tolerance, TypeOfElement, Precision) - ## Create a criterion by the given parameters - # \n Criterion structures allow to define complex filters by combining them with logical operations (AND / OR) (see example below) - # @param elementType the type of elements(SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) - # @param CritType the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.) - # Type SMESH.FunctorType._items in the Python Console to see all values. - # Note that the items starting from FT_LessThan are not suitable for CritType. - # @param Compare belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo} - # @param Threshold the threshold value (range of ids as string, shape, numeric) - # @param UnaryOp SMESH.FT_LogicalNOT or SMESH.FT_Undefined - # @param BinaryOp a binary logical operation SMESH.FT_LogicalAND, SMESH.FT_LogicalOR or - # SMESH.FT_Undefined - # @param Tolerance the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface, - # SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces criteria - # @return SMESH.Filter.Criterion - # - # Example of Criteria usage - # @ingroup l1_controls def GetCriterion(self,elementType, CritType, Compare = FT_EqualTo, @@ -714,6 +823,29 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): UnaryOp=FT_Undefined, BinaryOp=FT_Undefined, Tolerance=1e-07): + """ + Create a criterion by the given parameters + Criterion structures allow to define complex filters by combining them with logical operations (AND / OR) (see example below) + + Parameters: + elementType: the type of elements(SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) + CritType: the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.) + Type SMESH.FunctorType._items in the Python Console to see all values. + Note that the items starting from FT_LessThan are not suitable for CritType. + Compare: belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo} + Threshold: the threshold value (range of ids as string, shape, numeric) + UnaryOp: SMESH.FT_LogicalNOT or SMESH.FT_Undefined + BinaryOp: a binary logical operation SMESH.FT_LogicalAND, SMESH.FT_LogicalOR or + SMESH.FT_Undefined + Tolerance: the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface, + SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces criteria + + Returns: + SMESH.Filter.Criterion + + href="../tui_filters_page.html#combining_filters" + """ + if not CritType in SMESH.FunctorType._items: raise TypeError, "CritType should be of SMESH.FunctorType" aCriterion = self.GetEmptyCriterion() @@ -837,7 +969,7 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): raise TypeError, "The Threshold should be an integer or SMESH.EntityType." pass pass - + elif CritType == FT_GroupColor: # Check the Threshold try: @@ -878,21 +1010,6 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): return aCriterion - ## Create a filter with the given parameters - # @param elementType the type of elements (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) - # @param CritType the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.) - # Type SMESH.FunctorType._items in the Python Console to see all values. - # Note that the items starting from FT_LessThan are not suitable for CritType. - # @param Compare belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo} - # @param Threshold the threshold value (range of ids as string, shape, numeric) - # @param UnaryOp SMESH.FT_LogicalNOT or SMESH.FT_Undefined - # @param Tolerance the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface, - # SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces and SMESH.FT_EqualNodes criteria - # @param mesh the mesh to initialize the filter with - # @return SMESH_Filter - # - # Example of Filters usage - # @ingroup l1_controls def GetFilter(self,elementType, CritType=FT_Undefined, Compare=FT_EqualTo, @@ -900,6 +1017,27 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): UnaryOp=FT_Undefined, Tolerance=1e-07, mesh=None): + """ + Create a filter with the given parameters + + Parameters: + elementType: the type of elements (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) + CritType: the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.) + Type SMESH.FunctorType._items in the Python Console to see all values. + Note that the items starting from FT_LessThan are not suitable for CritType. + Compare: belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo} + Threshold: the threshold value (range of ids as string, shape, numeric) + UnaryOp: SMESH.FT_LogicalNOT or SMESH.FT_Undefined + Tolerance: the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface, + SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces and SMESH.FT_EqualNodes criteria + mesh: the mesh to initialize the filter with + + Returns: + SMESH_Filter + + `Example of Filters usage <../tui_filters_page.html#tui_filters>`_ + """ + aCriterion = self.GetCriterion(elementType, CritType, Compare, Threshold, UnaryOp, FT_Undefined,Tolerance) aFilterMgr = self.CreateFilterManager() aFilter = aFilterMgr.CreateFilter() @@ -912,14 +1050,20 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): aFilterMgr.UnRegister() return aFilter - ## Create a filter from criteria - # @param criteria a list of criteria - # @param binOp binary operator used when binary operator of criteria is undefined - # @return SMESH_Filter - # - # Example of Filters usage - # @ingroup l1_controls def GetFilterFromCriteria(self,criteria, binOp=SMESH.FT_LogicalAND): + """ + Create a filter from criteria + + Parameters: + criteria: a list of criteria + binOp: binary operator used when binary operator of criteria is undefined + + Returns: + SMESH_Filter + + `Example of Filters usage <../tui_filters_page.html#tui_filters>`_ + """ + for i in range( len( criteria ) - 1 ): if criteria[i].BinaryOp == self.EnumToLong( SMESH.FT_Undefined ): criteria[i].BinaryOp = self.EnumToLong( binOp ) @@ -929,13 +1073,19 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): aFilterMgr.UnRegister() return aFilter - ## Create a numerical functor by its type - # @param theCriterion functor type - an item of SMESH.FunctorType enumeration. - # Type SMESH.FunctorType._items in the Python Console to see all items. - # Note that not all items correspond to numerical functors. - # @return SMESH_NumericalFunctor - # @ingroup l1_controls def GetFunctor(self,theCriterion): + """ + Create a numerical functor by its type + + Parameters: + theCriterion: functor type - an item of SMESH.FunctorType enumeration. + Type SMESH.FunctorType._items in the Python Console to see all items. + Note that not all items correspond to numerical functors. + + Returns: + SMESH_NumericalFunctor + """ + if isinstance( theCriterion, SMESH._objref_NumericalFunctor ): return theCriterion aFilterMgr = self.CreateFilterManager() @@ -979,11 +1129,17 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): aFilterMgr.UnRegister() return functor - ## Create hypothesis - # @param theHType mesh hypothesis type (string) - # @param theLibName mesh plug-in library name - # @return created hypothesis instance def CreateHypothesis(self, theHType, theLibName="libStdMeshersEngine.so"): + """ + Create hypothesis + + Parameters: + theHType: mesh hypothesis type (string) + theLibName: mesh plug-in library name + + Returns: + created hypothesis instance + """ hyp = SMESH._objref_SMESH_Gen.CreateHypothesis(self, theHType, theLibName ) if isinstance( hyp, SMESH._objref_SMESH_Algo ): @@ -1000,10 +1156,14 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): return hyp - ## Get the mesh statistic - # @return dictionary "element type" - "count of elements" - # @ingroup l1_meshinfo def GetMeshInfo(self, obj): + """ + Get the mesh statistic + + Returns: + dictionary "element type" - "count of elements" + """ + if isinstance( obj, Mesh ): obj = obj.GetMesh() d = {} @@ -1014,21 +1174,25 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): pass return d - ## Get minimum distance between two objects - # - # If @a src2 is None, and @a id2 = 0, distance from @a src1 / @a id1 to the origin is computed. - # If @a src2 is None, and @a id2 != 0, it is assumed that both @a id1 and @a id2 belong to @a src1. - # - # @param src1 first source object - # @param src2 second source object - # @param id1 node/element id from the first source - # @param id2 node/element id from the second (or first) source - # @param isElem1 @c True if @a id1 is element id, @c False if it is node id - # @param isElem2 @c True if @a id2 is element id, @c False if it is node id - # @return minimum distance value - # @sa GetMinDistance() - # @ingroup l1_measurements def MinDistance(self, src1, src2=None, id1=0, id2=0, isElem1=False, isElem2=False): + """ + Get minimum distance between two objects + + If @a src2 is None, and @a id2 = 0, distance from @a src1 / @a id1 to the origin is computed. + If @a src2 is None, and @a id2 != 0, it is assumed that both @a id1 and @a id2 belong to @a src1. + + Parameters: + src1: first source object + src2: second source object + id1: node/element id from the first source + id2: node/element id from the second (or first) source + isElem1: *True* if *id1* is element id, *False* if it is node id + isElem2: *True* if *id2* is element id, *False* if it is node id + + Returns: + minimum distance value *GetMinDistance()* + """ + result = self.GetMinDistance(src1, src2, id1, id2, isElem1, isElem2) if result is None: result = 0.0 @@ -1036,21 +1200,26 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): result = result.value return result - ## Get measure structure specifying minimum distance data between two objects - # - # If @a src2 is None, and @a id2 = 0, distance from @a src1 / @a id1 to the origin is computed. - # If @a src2 is None, and @a id2 != 0, it is assumed that both @a id1 and @a id2 belong to @a src1. - # - # @param src1 first source object - # @param src2 second source object - # @param id1 node/element id from the first source - # @param id2 node/element id from the second (or first) source - # @param isElem1 @c True if @a id1 is element id, @c False if it is node id - # @param isElem2 @c True if @a id2 is element id, @c False if it is node id - # @return Measure structure or None if input data is invalid - # @sa MinDistance() - # @ingroup l1_measurements def GetMinDistance(self, src1, src2=None, id1=0, id2=0, isElem1=False, isElem2=False): + """ + Get measure structure specifying minimum distance data between two objects + + If @a src2 is None, and @a id2 = 0, distance from @a src1 / @a id1 to the origin is computed. + If @a src2 is None, and @a id2 != 0, it is assumed that both @a id1 and @a id2 belong to @a src1. + + + Parameters: + src1: first source object + src2: second source object + id1: node/element id from the first source + id2: node/element id from the second (or first) source + isElem1: *True* if **id1** is element id, *False* if it is node id + isElem2: *True* if **id2** is element id, *False* if it is node id + + Returns: + Measure structure or None if input data is invalid **MinDistance()** + """ + if isinstance(src1, Mesh): src1 = src1.mesh if isinstance(src2, Mesh): src2 = src2.mesh if src2 is None and id2 != 0: src2 = src1 @@ -1084,12 +1253,17 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): result = aMeasurements.MinDistance(src1, src2) return result - ## Get bounding box of the specified object(s) - # @param objects single source object or list of source objects - # @return tuple of six values (minX, minY, minZ, maxX, maxY, maxZ) - # @sa GetBoundingBox() - # @ingroup l1_measurements def BoundingBox(self, objects): + """ + Get bounding box of the specified object(s) + + Parameters: + objects: single source object or list of source objects + + Returns: + tuple of six values (minX, minY, minZ, maxX, maxY, maxZ) **GetBoundingBox()** + """ + result = self.GetBoundingBox(objects) if result is None: result = (0.0,)*6 @@ -1097,12 +1271,17 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): result = (result.minX, result.minY, result.minZ, result.maxX, result.maxY, result.maxZ) return result - ## Get measure structure specifying bounding box data of the specified object(s) - # @param objects single source object or list of source objects - # @return Measure structure - # @sa BoundingBox() - # @ingroup l1_measurements def GetBoundingBox(self, objects): + """ + Get measure structure specifying bounding box data of the specified object(s) + + Parameters: + objects: single source object or list of source objects + + Returns: + Measure structure **BoundingBox()** + """ + if isinstance(objects, tuple): objects = list(objects) if not isinstance(objects, list): @@ -1121,11 +1300,17 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): aMeasurements.UnRegister() return result - ## Get sum of lengths of all 1D elements in the mesh object. - # @param obj mesh, submesh or group - # @return sum of lengths of all 1D elements - # @ingroup l1_measurements def GetLength(self, obj): + """ + Get sum of lengths of all 1D elements in the mesh object. + + Parameters: + obj: mesh, submesh or group + + Returns: + sum of lengths of all 1D elements + """ + if isinstance(obj, Mesh): obj = obj.mesh if isinstance(obj, Mesh_Algorithm): obj = obj.GetSubMesh() aMeasurements = self.CreateMeasurements() @@ -1133,11 +1318,17 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): aMeasurements.UnRegister() return value - ## Get sum of areas of all 2D elements in the mesh object. - # @param obj mesh, submesh or group - # @return sum of areas of all 2D elements - # @ingroup l1_measurements def GetArea(self, obj): + """ + Get sum of areas of all 2D elements in the mesh object. + + Parameters: + obj: mesh, submesh or group + + Returns: + sum of areas of all 2D elements + """ + if isinstance(obj, Mesh): obj = obj.mesh if isinstance(obj, Mesh_Algorithm): obj = obj.GetSubMesh() aMeasurements = self.CreateMeasurements() @@ -1145,11 +1336,17 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): aMeasurements.UnRegister() return value - ## Get sum of volumes of all 3D elements in the mesh object. - # @param obj mesh, submesh or group - # @return sum of volumes of all 3D elements - # @ingroup l1_measurements def GetVolume(self, obj): + """ + Get sum of volumes of all 3D elements in the mesh object. + + Parameters: + obj: mesh, submesh or group + + Returns: + sum of volumes of all 3D elements + """ + if isinstance(obj, Mesh): obj = obj.mesh if isinstance(obj, Mesh_Algorithm): obj = obj.GetSubMesh() aMeasurements = self.CreateMeasurements() @@ -1160,22 +1357,9 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): pass # end of class smeshBuilder import omniORB -#Registering the new proxy for SMESH_Gen omniORB.registerObjref(SMESH._objref_SMESH_Gen._NP_RepositoryId, smeshBuilder) +"""Registering the new proxy for SMESH_Gen""" -## Create a new smeshBuilder instance.The smeshBuilder class provides the Python -# interface to create or load meshes. -# -# Typical use is: -# \code -# import salome -# salome.salome_init() -# from salome.smesh import smeshBuilder -# smesh = smeshBuilder.New(salome.myStudy) -# \endcode -# @param study SALOME study, generally obtained by salome.myStudy. -# @param instance CORBA proxy of SMESH Engine. If None, the default Engine is used. -# @return smeshBuilder instance def New( study, instance=None): """ @@ -1189,8 +1373,8 @@ def New( study, instance=None): smesh = smeshBuilder.New(salome.myStudy) Parameters: - study SALOME study, generally obtained by salome.myStudy. - instance CORBA proxy of SMESH Engine. If None, the default Engine is used. + study: SALOME study, generally obtained by salome.myStudy. + instance: CORBA proxy of SMESH Engine. If None, the default Engine is used. Returns: smeshBuilder instance """ @@ -1209,28 +1393,34 @@ def New( study, instance=None): # Public class: Mesh # ================== -## This class allows defining and managing a mesh. -# It has a set of methods to build a mesh on the given geometry, including the definition of sub-meshes. -# It also has methods to define groups of mesh elements, to modify a mesh (by addition of -# new nodes and elements and by changing the existing entities), to get information -# about a mesh and to export a mesh in different formats. class Mesh: + """ + This class allows defining and managing a mesh. + It has a set of methods to build a mesh on the given geometry, including the definition of sub-meshes. + It also has methods to define groups of mesh elements, to modify a mesh (by addition of + new nodes and elements and by changing the existing entities), to get information + about a mesh and to export a mesh in different formats. + """ __metaclass__ = MeshMeta geom = 0 mesh = 0 editor = 0 - ## Constructor - # - # Create a mesh on the shape \a obj (or an empty mesh if \a obj is equal to 0) and - # sets the GUI name of this mesh to \a name. - # @param smeshpyD an instance of smeshBuilder class - # @param geompyD an instance of geomBuilder class - # @param obj Shape to be meshed or SMESH_Mesh object - # @param name Study name of the mesh - # @ingroup l2_construct def __init__(self, smeshpyD, geompyD, obj=0, name=0): + """ + Constructor + + Create a mesh on the shape *obj* (or an empty mesh if *obj* is equal to 0) and + sets the GUI name of this mesh to *name*. + + Parameters: + smeshpyD: an instance of smeshBuilder class + geompyD: an instance of geomBuilder class + obj: Shape to be meshed or SMESH_Mesh object + name: Study name of the mesh + """ + self.smeshpyD=smeshpyD self.geompyD=geompyD if obj is None: @@ -1278,17 +1468,24 @@ class Mesh: pass pass - ## Destructor. Clean-up resources def __del__(self): + """ + Destructor. Clean-up resources + """ if self.mesh: #self.mesh.UnRegister() pass pass - - ## Initialize the Mesh object from an instance of SMESH_Mesh interface - # @param theMesh a SMESH_Mesh object - # @ingroup l2_construct + def SetMesh(self, theMesh): + """ + Initialize the Mesh object from an instance of SMESH_Mesh interface + + Parameters: + theMesh: a SMESH_Mesh object + """ + + # do not call Register() as this prevents mesh servant deletion at closing study #if self.mesh: self.mesh.UnRegister() self.mesh = theMesh @@ -1297,98 +1494,151 @@ class Mesh: self.geom = self.mesh.GetShapeToMesh() pass - ## Return the mesh, that is an instance of SMESH_Mesh interface - # @return a SMESH_Mesh object - # @ingroup l2_construct def GetMesh(self): + """ + Return the mesh, that is an instance of SMESH_Mesh interface + + Returns: + a SMESH_Mesh object + """ + return self.mesh - ## Get the name of the mesh - # @return the name of the mesh as a string - # @ingroup l2_construct def GetName(self): + """ + Get the name of the mesh + + Returns: + the name of the mesh as a string + """ + name = GetName(self.GetMesh()) return name - ## Set a name to the mesh - # @param name a new name of the mesh - # @ingroup l2_construct def SetName(self, name): + """ + Set a name to the mesh + + Parameters: + name: a new name of the mesh + """ + self.smeshpyD.SetName(self.GetMesh(), name) - ## Get a sub-mesh object associated to a \a geom geometrical object. - # @param geom a geometrical object (shape) - # @param name a name for the sub-mesh in the Object Browser - # @return an object of type SMESH.SMESH_subMesh, representing a part of mesh, - # which lies on the given shape - # - # The sub-mesh object gives access to the IDs of nodes and elements. - # The sub-mesh object has the following methods: - # - SMESH.SMESH_subMesh.GetNumberOfElements() - # - SMESH.SMESH_subMesh.GetNumberOfNodes( all ) - # - SMESH.SMESH_subMesh.GetElementsId() - # - SMESH.SMESH_subMesh.GetElementsByType( ElementType ) - # - SMESH.SMESH_subMesh.GetNodesId() - # - SMESH.SMESH_subMesh.GetSubShape() - # - SMESH.SMESH_subMesh.GetFather() - # - SMESH.SMESH_subMesh.GetId() - # @note A sub-mesh is implicitly created when a sub-shape is specified at - # creating an algorithm, for example: algo1D = mesh.Segment(geom=Edge_1) - # creates a sub-mesh on @c Edge_1 and assign Wire Discretization algorithm to it. - # The created sub-mesh can be retrieved from the algorithm: - # submesh = algo1D.GetSubMesh() - # @ingroup l2_submeshes def GetSubMesh(self, geom, name): + """ + Get a sub-mesh object associated to a *geom* geometrical object. + + Parameters: + geom: a geometrical object (shape) + name: a name for the sub-mesh in the Object Browser + + Returns: + an object of type SMESH.SMESH_subMesh, representing a part of mesh, + which lies on the given shape + + The sub-mesh object gives access to the IDs of nodes and elements. + The sub-mesh object has the following methods: + + - SMESH.SMESH_subMesh.GetNumberOfElements() + - SMESH.SMESH_subMesh.GetNumberOfNodes( all ) + - SMESH.SMESH_subMesh.GetElementsId() + - SMESH.SMESH_subMesh.GetElementsByType( ElementType ) + - SMESH.SMESH_subMesh.GetNodesId() + - SMESH.SMESH_subMesh.GetSubShape() + - SMESH.SMESH_subMesh.GetFather() + - SMESH.SMESH_subMesh.GetId() + + Note: + A sub-mesh is implicitly created when a sub-shape is specified at + creating an algorithm, for example: algo1D = mesh.Segment(geom=Edge_1) + creates a sub-mesh on *Edge_1* and assign Wire Discretization algorithm to it. + The created sub-mesh can be retrieved from the algorithm: + submesh = algo1D.GetSubMesh() + """ + AssureGeomPublished( self, geom, name ) submesh = self.mesh.GetSubMesh( geom, name ) return submesh - ## Return the shape associated to the mesh - # @return a GEOM_Object - # @ingroup l2_construct def GetShape(self): + """ + Return the shape associated to the mesh + + Returns: + a GEOM_Object + """ + return self.geom - ## Associate the given shape to the mesh (entails the recreation of the mesh) - # @param geom the shape to be meshed (GEOM_Object) - # @ingroup l2_construct def SetShape(self, geom): + """ + Associate the given shape to the mesh (entails the recreation of the mesh) + + Parameters: + geom: the shape to be meshed (GEOM_Object) + """ + self.mesh = self.smeshpyD.CreateMesh(geom) - ## Load mesh from the study after opening the study def Load(self): + """ + Load mesh from the study after opening the study + """ self.mesh.Load() - ## Return true if the hypotheses are defined well - # @param theSubObject a sub-shape of a mesh shape - # @return True or False - # @ingroup l2_construct def IsReadyToCompute(self, theSubObject): + """ + Return true if the hypotheses are defined well + + Parameters: + theSubObject: a sub-shape of a mesh shape + + Returns: + True or False + """ + return self.smeshpyD.IsReadyToCompute(self.mesh, theSubObject) - ## Return errors of hypotheses definition. - # The list of errors is empty if everything is OK. - # @param theSubObject a sub-shape of a mesh shape - # @return a list of errors - # @ingroup l2_construct def GetAlgoState(self, theSubObject): + """ + Return errors of hypotheses definition. + The list of errors is empty if everything is OK. + + Parameters: + theSubObject: a sub-shape of a mesh shape + + Returns: + a list of errors + """ + return self.smeshpyD.GetAlgoState(self.mesh, theSubObject) - ## Return a geometrical object on which the given element was built. - # The returned geometrical object, if not nil, is either found in the - # study or published by this method with the given name - # @param theElementID the id of the mesh element - # @param theGeomName the user-defined name of the geometrical object - # @return GEOM::GEOM_Object instance - # @ingroup l1_meshinfo def GetGeometryByMeshElement(self, theElementID, theGeomName): + """ + Return a geometrical object on which the given element was built. + The returned geometrical object, if not nil, is either found in the + study or published by this method with the given name + + Parameters: + theElementID: the id of the mesh element + theGeomName: the user-defined name of the geometrical object + + Returns: + GEOM::GEOM_Object instance + """ + return self.smeshpyD.GetGeometryByMeshElement( self.mesh, theElementID, theGeomName ) - ## Return the mesh dimension depending on the dimension of the underlying shape - # or, if the mesh is not based on any shape, basing on deimension of elements - # @return mesh dimension as an integer value [0,3] - # @ingroup l1_meshinfo def MeshDimension(self): + """ + Return the mesh dimension depending on the dimension of the underlying shape + or, if the mesh is not based on any shape, basing on deimension of elements + + Returns: + mesh dimension as an integer value [0,3] + """ + if self.mesh.HasShapeToMesh(): shells = self.geompyD.SubShapeAllIDs( self.geom, self.geompyD.ShapeType["SOLID"] ) if len( shells ) > 0 : @@ -1405,12 +1655,16 @@ class Mesh: if self.NbEdges() > 0: return 1 return 0 - ## Evaluate size of prospective mesh on a shape - # @return a list where i-th element is a number of elements of i-th SMESH.EntityType - # To know predicted number of e.g. edges, inquire it this way - # Evaluate()[ EnumToLong( Entity_Edge )] - # @ingroup l2_construct def Evaluate(self, geom=0): + """ + Evaluate size of prospective mesh on a shape + + Returns: + a list where i-th element is a number of elements of i-th SMESH.EntityType + To know predicted number of e.g. edges, inquire it this way + Evaluate()[ EnumToLong( Entity_Edge )] + """ + if geom == 0 or not isinstance(geom, geomBuilder.GEOM._objref_GEOM_Object): if self.geom == 0: geom = self.mesh.GetShapeToMesh() @@ -1419,15 +1673,21 @@ class Mesh: return self.smeshpyD.Evaluate(self.mesh, geom) - ## Compute the mesh and return the status of the computation - # @param geom geomtrical shape on which mesh data should be computed - # @param discardModifs if True and the mesh has been edited since - # a last total re-compute and that may prevent successful partial re-compute, - # then the mesh is cleaned before Compute() - # @param refresh if @c True, Object browser is automatically updated (when running in GUI) - # @return True or False - # @ingroup l2_construct def Compute(self, geom=0, discardModifs=False, refresh=False): + """ + Compute the mesh and return the status of the computation + + Parameters: + geom: geomtrical shape on which mesh data should be computed + discardModifs: if True and the mesh has been edited since + a last total re-compute and that may prevent successful partial re-compute, + then the mesh is cleaned before Compute() + refresh: if *True*, Object browser is automatically updated (when running in GUI) + + Returns: + True or False + """ + if geom == 0 or not isinstance(geom, geomBuilder.GEOM._objref_GEOM_Object): if self.geom == 0: geom = self.mesh.GetShapeToMesh() @@ -1532,22 +1792,31 @@ class Mesh: return ok - ## Return a list of error messages (SMESH.ComputeError) of the last Compute() - # @ingroup l2_construct def GetComputeErrors(self, shape=0 ): + """ + Return a list of error messages (SMESH.ComputeError) of the last Compute() + """ + if shape == 0: shape = self.mesh.GetShapeToMesh() return self.smeshpyD.GetComputeErrors( self.mesh, shape ) - ## Return a name of a sub-shape by its ID - # @param subShapeID a unique ID of a sub-shape - # @return a string describing the sub-shape; possible variants: - # - "Face_12" (published sub-shape) - # - FACE #3 (not published sub-shape) - # - sub-shape #3 (invalid sub-shape ID) - # - #3 (error in this function) - # @ingroup l1_auxiliary def GetSubShapeName(self, subShapeID ): + """ + Return a name of a sub-shape by its ID + + Parameters: + subShapeID: a unique ID of a sub-shape + + Returns: + a string describing the sub-shape; possible variants: + + - "Face_12" (published sub-shape) + - FACE #3 (not published sub-shape) + - sub-shape #3 (invalid sub-shape ID) + - #3 (error in this function) + """ + if not self.mesh.HasShapeToMesh(): return "" try: @@ -1585,12 +1854,18 @@ class Mesh: shapeText = "#%s" % (subShapeID) return shapeText - ## Return a list of sub-shapes meshing of which failed, grouped into GEOM groups by - # error of an algorithm - # @param publish if @c True, the returned groups will be published in the study - # @return a list of GEOM groups each named after a failed algorithm - # @ingroup l2_construct def GetFailedShapes(self, publish=False): + """ + Return a list of sub-shapes meshing of which failed, grouped into GEOM groups by + error of an algorithm + + Parameters: + publish: if *True*, the returned groups will be published in the study + + Returns: + a list of GEOM groups each named after a failed algorithm + """ + algo2shapes = {} computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, self.GetShape() ) @@ -1628,35 +1903,51 @@ class Mesh: self.geompyD.addToStudyInFather( self.geom, group, group.GetName() ) return groups - ## Return sub-mesh objects list in meshing order - # @return list of lists of sub-meshes - # @ingroup l2_construct def GetMeshOrder(self): + """ + Return sub-mesh objects list in meshing order + + Returns: + list of lists of sub-meshes + """ + return self.mesh.GetMeshOrder() - ## Set order in which concurrent sub-meshes should be meshed - # @param submeshes list of lists of sub-meshes - # @ingroup l2_construct def SetMeshOrder(self, submeshes): + """ + Set order in which concurrent sub-meshes should be meshed + + Parameters: + submeshes list of lists of sub-meshes + """ + return self.mesh.SetMeshOrder(submeshes) - ## Remove all nodes and elements generated on geometry. Imported elements remain. - # @param refresh if @c True, Object browser is automatically updated (when running in GUI) - # @ingroup l2_construct def Clear(self, refresh=False): + """ + Remove all nodes and elements generated on geometry. Imported elements remain. + + Parameters: + refresh if *True*, Object browser is automatically updated (when running in GUI) + """ + self.mesh.Clear() - if ( salome.sg.hasDesktop() and + if ( salome.sg.hasDesktop() and salome.myStudyManager.GetStudyByID( self.mesh.GetStudyId() ) ): smeshgui = salome.ImportComponentGUI("SMESH") smeshgui.Init(self.mesh.GetStudyId()) smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), False, True ) if refresh: salome.sg.updateObjBrowser(True) - ## Remove all nodes and elements of indicated shape - # @param refresh if @c True, Object browser is automatically updated (when running in GUI) - # @param geomId the ID of a sub-shape to remove elements on - # @ingroup l2_submeshes def ClearSubMesh(self, geomId, refresh=False): + """ + Remove all nodes and elements of indicated shape + + Parameters: + refresh: if *True*, Object browser is automatically updated (when running in GUI) + geomId: the ID of a sub-shape to remove elements on + """ + self.mesh.ClearSubMesh(geomId) if salome.sg.hasDesktop(): smeshgui = salome.ImportComponentGUI("SMESH") @@ -1664,11 +1955,17 @@ class Mesh: smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), False, True ) if refresh: salome.sg.updateObjBrowser(True) - ## Compute a tetrahedral mesh using AutomaticLength + MEFISTO + Tetrahedron - # @param fineness [0.0,1.0] defines mesh fineness - # @return True or False - # @ingroup l3_algos_basic def AutomaticTetrahedralization(self, fineness=0): + """ + Compute a tetrahedral mesh using AutomaticLength + MEFISTO + Tetrahedron + + Parameters: + fineness: [0.0,1.0] defines mesh fineness + + Returns: + True or False + """ + dim = self.MeshDimension() # assign hypotheses self.RemoveGlobalHypotheses() @@ -1681,11 +1978,17 @@ class Mesh: pass return self.Compute() - ## Compute an hexahedral mesh using AutomaticLength + Quadrangle + Hexahedron - # @param fineness [0.0, 1.0] defines mesh fineness - # @return True or False - # @ingroup l3_algos_basic def AutomaticHexahedralization(self, fineness=0): + """ + Compute an hexahedral mesh using AutomaticLength + Quadrangle + Hexahedron + + Parameters: + fineness [0.0, 1.0] defines mesh fineness + + Returns: + True or False + """ + dim = self.MeshDimension() # assign the hypotheses self.RemoveGlobalHypotheses() @@ -1698,12 +2001,18 @@ class Mesh: pass return self.Compute() - ## Assign a hypothesis - # @param hyp a hypothesis to assign - # @param geom a subhape of mesh geometry - # @return SMESH.Hypothesis_Status - # @ingroup l2_editing def AddHypothesis(self, hyp, geom=0): + """ + Assign a hypothesis + + Parameters: + hyp: a hypothesis to assign + geom: a subhape of mesh geometry + + Returns: + SMESH.Hypothesis_Status + """ + if isinstance( hyp, geomBuilder.GEOM._objref_GEOM_Object ): hyp, geom = geom, hyp if isinstance( hyp, Mesh_Algorithm ): @@ -1736,12 +2045,18 @@ class Mesh: TreatHypoStatus( status, hyp_name, geom_name, isAlgo, self ) return status - ## Return True if an algorithm of hypothesis is assigned to a given shape - # @param hyp a hypothesis to check - # @param geom a subhape of mesh geometry - # @return True of False - # @ingroup l2_editing def IsUsedHypothesis(self, hyp, geom): + """ + Return True if an algorithm of hypothesis is assigned to a given shape + + Parameters: + hyp: a hypothesis to check + geom: a subhape of mesh geometry + + Returns: + True of False + """ + if not hyp: # or not geom return False if isinstance( hyp, Mesh_Algorithm ): @@ -1753,12 +2068,18 @@ class Mesh: return True return False - ## Unassign a hypothesis - # @param hyp a hypothesis to unassign - # @param geom a sub-shape of mesh geometry - # @return SMESH.Hypothesis_Status - # @ingroup l2_editing def RemoveHypothesis(self, hyp, geom=0): + """ + Unassign a hypothesis + + Parameters: + hyp: a hypothesis to unassign + geom: a sub-shape of mesh geometry + + Returns: + SMESH.Hypothesis_Status + """ + if not hyp: return None if isinstance( hyp, Mesh_Algorithm ): @@ -1775,53 +2096,63 @@ class Mesh: print "WARNING: RemoveHypothesis() failed as '%s' is not assigned to '%s' shape" % ( hypName, geoName ) return None - ## Get the list of hypotheses added on a geometry - # @param geom a sub-shape of mesh geometry - # @return the sequence of SMESH_Hypothesis - # @ingroup l2_editing def GetHypothesisList(self, geom): + """ + Get the list of hypotheses added on a geometry + + Parameters: + geom: a sub-shape of mesh geometry + + Returns: + the sequence of SMESH_Hypothesis + """ + return self.mesh.GetHypothesisList( geom ) - ## Remove all global hypotheses - # @ingroup l2_editing def RemoveGlobalHypotheses(self): + """ + Remove all global hypotheses + """ + current_hyps = self.mesh.GetHypothesisList( self.geom ) for hyp in current_hyps: self.mesh.RemoveHypothesis( self.geom, hyp ) pass pass - ## Export the mesh in a file in MED format - ## allowing to overwrite the file if it exists or add the exported data to its contents - # @param f is the file name - # @param auto_groups boolean parameter for creating/not creating - # the groups Group_On_All_Nodes, Group_On_All_Faces, ... ; - # the typical use is auto_groups=False. - # @param version MED format version - # - MED_V2_1 is obsolete. - # - MED_V2_2 means current version (kept for compatibility reasons) - # - MED_LATEST means current version. - # - MED_MINOR_x where x from 0 to 9 indicates the minor version of MED - # to use for writing MED files, for backward compatibility : - # for instance, with SALOME 8.4 use MED 3.2 (minor=2) instead of 3.3, - # to allow the file to be read with SALOME 8.3. - # @param overwrite boolean parameter for overwriting/not overwriting the file - # @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh - # @param autoDimension if @c True (default), a space dimension of a MED mesh can be either - # - 1D if all mesh nodes lie on OX coordinate axis, or - # - 2D if all mesh nodes lie on XOY coordinate plane, or - # - 3D in the rest cases.
- # If @a autoDimension is @c False, the space dimension is always 3. - # @param fields list of GEOM fields defined on the shape to mesh. - # @param geomAssocFields each character of this string means a need to export a - # corresponding field; correspondence between fields and characters is following: - # - 'v' stands for "_vertices _" field; - # - 'e' stands for "_edges _" field; - # - 'f' stands for "_faces _" field; - # - 's' stands for "_solids _" field. - # @ingroup l2_impexp - def ExportMED(self, f, auto_groups=0, version=MED_LATEST, + def ExportMED(self, f, auto_groups=0, version=MED_V2_2, overwrite=1, meshPart=None, autoDimension=True, fields=[], geomAssocFields=''): + """ + Export the mesh in a file in MED format + allowing to overwrite the file if it exists or add the exported data to its contents + + Parameters: + f: is the file name + auto_groups: boolean parameter for creating/not creating + the groups Group_On_All_Nodes, Group_On_All_Faces, ... ; + the typical use is auto_groups=False. + version: MED format version (MED_V2_1 or MED_V2_2, + the latter meaning any current version). The parameter is + obsolete since MED_V2_1 is no longer supported. + overwrite: boolean parameter for overwriting/not overwriting the file + meshPart: a part of mesh (group, sub-mesh) to export instead of the mesh + autoDimension: if *True* (default), a space dimension of a MED mesh can be either + + - 1D if all mesh nodes lie on OX coordinate axis, or + - 2D if all mesh nodes lie on XOY coordinate plane, or + - 3D in the rest cases. + + If *autoDimension* is *False*, the space dimension is always 3. + fields: list of GEOM fields defined on the shape to mesh. + geomAssocFields: each character of this string means a need to export a + corresponding field; correspondence between fields and characters is following: + + - 'v' stands for "_vertices _" field; + - 'e' stands for "_edges _" field; + - 'f' stands for "_faces _" field; + - 's' stands for "_solids _" field. + """ + if meshPart or fields or geomAssocFields: unRegister = genObjUnRegister() if isinstance( meshPart, list ): @@ -1832,20 +2163,29 @@ class Mesh: else: self.mesh.ExportToMEDX(f, auto_groups, version, overwrite, autoDimension) - ## Export the mesh in a file in SAUV format - # @param f is the file name - # @param auto_groups boolean parameter for creating/not creating - # the groups Group_On_All_Nodes, Group_On_All_Faces, ... ; - # the typical use is auto_groups=false. - # @ingroup l2_impexp def ExportSAUV(self, f, auto_groups=0): + """ + Export the mesh in a file in SAUV format + + + Parameters: + f: is the file name + auto_groups: boolean parameter for creating/not creating + the groups Group_On_All_Nodes, Group_On_All_Faces, ... ; + the typical use is auto_groups=false. + """ + self.mesh.ExportSAUV(f, auto_groups) - ## Export the mesh in a file in DAT format - # @param f the file name - # @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh - # @ingroup l2_impexp def ExportDAT(self, f, meshPart=None): + """ + Export the mesh in a file in DAT format + + Parameters: + f: the file name + meshPart: a part of mesh (group, sub-mesh) to export instead of the mesh + """ + if meshPart: unRegister = genObjUnRegister() if isinstance( meshPart, list ): @@ -1855,11 +2195,15 @@ class Mesh: else: self.mesh.ExportDAT(f) - ## Export the mesh in a file in UNV format - # @param f the file name - # @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh - # @ingroup l2_impexp def ExportUNV(self, f, meshPart=None): + """ + Export the mesh in a file in UNV format + + Parameters: + f: the file name + meshPart: a part of mesh (group, sub-mesh) to export instead of the mesh + """ + if meshPart: unRegister = genObjUnRegister() if isinstance( meshPart, list ): @@ -1869,12 +2213,16 @@ class Mesh: else: self.mesh.ExportUNV(f) - ## Export the mesh in a file in STL format - # @param f the file name - # @param ascii defines the file encoding - # @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh - # @ingroup l2_impexp def ExportSTL(self, f, ascii=1, meshPart=None): + """ + Export the mesh in a file in STL format + + Parameters: + f: the file name + ascii: defines the file encoding + meshPart: a part of mesh (group, sub-mesh) to export instead of the mesh + """ + if meshPart: unRegister = genObjUnRegister() if isinstance( meshPart, list ): @@ -1884,15 +2232,19 @@ class Mesh: else: self.mesh.ExportSTL(f, ascii) - ## Export the mesh in a file in CGNS format - # @param f is the file name - # @param overwrite boolean parameter for overwriting/not overwriting the file - # @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh - # @param groupElemsByType if true all elements of same entity type are exported at ones, - # else elements are exported in order of their IDs which can cause creation - # of multiple cgns sections - # @ingroup l2_impexp def ExportCGNS(self, f, overwrite=1, meshPart=None, groupElemsByType=False): + """ + Export the mesh in a file in CGNS format + + Parameters: + f: is the file name + overwrite: boolean parameter for overwriting/not overwriting the file + meshPart: a part of mesh (group, sub-mesh) to export instead of the mesh + groupElemsByType: if true all elements of same entity type are exported at ones, + else elements are exported in order of their IDs which can cause creation + of multiple cgns sections + """ + unRegister = genObjUnRegister() if isinstance( meshPart, list ): meshPart = self.GetIDSource( meshPart, SMESH.ALL ) @@ -1903,13 +2255,17 @@ class Mesh: meshPart = self.mesh self.mesh.ExportCGNS(meshPart, f, overwrite, groupElemsByType) - ## Export the mesh in a file in GMF format. - # GMF files must have .mesh extension for the ASCII format and .meshb for - # the bynary format. Other extensions are not allowed. - # @param f is the file name - # @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh - # @ingroup l2_impexp def ExportGMF(self, f, meshPart=None): + """ + Export the mesh in a file in GMF format. + GMF files must have .mesh extension for the ASCII format and .meshb for + the bynary format. Other extensions are not allowed. + + Parameters: + f: is the file name + meshPart: a part of mesh (group, sub-mesh) to export instead of the mesh + """ + unRegister = genObjUnRegister() if isinstance( meshPart, list ): meshPart = self.GetIDSource( meshPart, SMESH.ALL ) @@ -1920,64 +2276,86 @@ class Mesh: meshPart = self.mesh self.mesh.ExportGMF(meshPart, f, True) - ## Deprecated, used only for compatibility! Please, use ExportMED() method instead. - # Export the mesh in a file in MED format - # allowing to overwrite the file if it exists or add the exported data to its contents - # @param f the file name - # @param version MED format version: - # - MED_V2_1 is obsolete. - # - MED_V2_2 means current version (kept for compatibility reasons) - # - MED_LATEST means current version. - # - MED_MINOR_x where x from 0 to 9 indicates the minor version of MED - # to use for writing MED files, for backward compatibility : - # for instance, with SALOME 8.4 use MED 3.2 (minor=2) instead of 3.3, - # to allow the file to be read with SALOME 8.3. - # @param opt boolean parameter for creating/not creating - # the groups Group_On_All_Nodes, Group_On_All_Faces, ... - # @param overwrite boolean parameter for overwriting/not overwriting the file - # @param autoDimension if @c True (default), a space dimension of a MED mesh can be either - # - 1D if all mesh nodes lie on OX coordinate axis, or - # - 2D if all mesh nodes lie on XOY coordinate plane, or - # - 3D in the rest cases.
- # If @a autoDimension is @c False, the space dimension is always 3. - # @ingroup l2_impexp - def ExportToMED(self, f, version=MED_LATEST, opt=0, overwrite=1, autoDimension=True): + def ExportToMED(self, f, version=MED_V2_2, opt=0, overwrite=1, autoDimension=True): + """ + Deprecated, used only for compatibility! Please, use ExportMED() method instead. + Export the mesh in a file in MED format + allowing to overwrite the file if it exists or add the exported data to its contents + + Parameters: + f: the file name + version: MED format version (MED_V2_1 or MED_V2_2, + the latter meaning any current version). The parameter is + obsolete since MED_V2_1 is no longer supported. + opt: boolean parameter for creating/not creating + the groups Group_On_All_Nodes, Group_On_All_Faces, ... + overwrite: boolean parameter for overwriting/not overwriting the file + autoDimension: if *True* (default), a space dimension of a MED mesh can be either + + - 1D if all mesh nodes lie on OX coordinate axis, or + - 2D if all mesh nodes lie on XOY coordinate plane, or + - 3D in the rest cases. + + If **autoDimension** isc **False**, the space dimension is always 3. + """ + self.mesh.ExportToMEDX(f, opt, version, overwrite, autoDimension) # Operations with groups: # ---------------------- - ## Create an empty mesh group - # @param elementType the type of elements in the group; either of - # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) - # @param name the name of the mesh group - # @return SMESH_Group - # @ingroup l2_grps_create def CreateEmptyGroup(self, elementType, name): + """ + Create an empty mesh group + + Parameters: + elementType: the type of elements in the group; either of + (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) + name: the name of the mesh group + + Returns: + SMESH_Group + """ + return self.mesh.CreateGroup(elementType, name) - ## Create a mesh group based on the geometric object \a grp - # and gives a \a name, \n if this parameter is not defined - # the name is the same as the geometric group name \n - # Note: Works like GroupOnGeom(). - # @param grp a geometric group, a vertex, an edge, a face or a solid - # @param name the name of the mesh group - # @return SMESH_GroupOnGeom - # @ingroup l2_grps_create def Group(self, grp, name=""): + """ + Create a mesh group based on the geometric object *grp* + and gives a *name*, + if this parameter is not defined + the name is the same as the geometric group name + + Note: + Works like GroupOnGeom(). + + Parameters: + grp: a geometric group, a vertex, an edge, a face or a solid + name: the name of the mesh group + + Returns: + SMESH_GroupOnGeom + """ + return self.GroupOnGeom(grp, name) - ## Create a mesh group based on the geometrical object \a grp - # and gives a \a name, \n if this parameter is not defined - # the name is the same as the geometrical group name - # @param grp a geometrical group, a vertex, an edge, a face or a solid - # @param name the name of the mesh group - # @param typ the type of elements in the group; either of - # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). If not set, it is - # automatically detected by the type of the geometry - # @return SMESH_GroupOnGeom - # @ingroup l2_grps_create def GroupOnGeom(self, grp, name="", typ=None): + """ + Create a mesh group based on the geometrical object *grp* + and gives a *name*, + if this parameter is not defined the name is the same as the geometrical group name + + Parameters: + grp: a geometrical group, a vertex, an edge, a face or a solid + name: the name of the mesh group + typ: the type of elements in the group; either of + (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). If not set, it is + automatically detected by the type of the geometry + + Returns: + SMESH_GroupOnGeom + """ + AssureGeomPublished( self, grp, name ) if name == "": name = grp.GetName() @@ -1985,8 +2363,10 @@ class Mesh: typ = self._groupTypeFromShape( grp ) return self.mesh.CreateGroupFromGEOM(typ, name, grp) - ## Pivate method to get a type of group on geometry def _groupTypeFromShape( self, shape ): + """ + Pivate method to get a type of group on geometry + """ tgeo = str(shape.GetShapeType()) if tgeo == "VERTEX": typ = NODE @@ -2006,26 +2386,38 @@ class Mesh: "_groupTypeFromShape(): invalid geometry '%s'" % GetName(shape) return typ - ## Create a mesh group with given \a name based on the \a filter which - ## is a special type of group dynamically updating it's contents during - ## mesh modification - # @param typ the type of elements in the group; either of - # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). - # @param name the name of the mesh group - # @param filter the filter defining group contents - # @return SMESH_GroupOnFilter - # @ingroup l2_grps_create def GroupOnFilter(self, typ, name, filter): + """ + Create a mesh group with given *name* based on the *filter* which + is a special type of group dynamically updating it's contents during + mesh modification + + Parameters: + typ: the type of elements in the group; either of + (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). + name: the name of the mesh group + filter: the filter defining group contents + + Returns: + SMESH_GroupOnFilter + """ + return self.mesh.CreateGroupFromFilter(typ, name, filter) - ## Create a mesh group by the given ids of elements - # @param groupName the name of the mesh group - # @param elementType the type of elements in the group; either of - # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). - # @param elemIDs either the list of ids, group, sub-mesh, or filter - # @return SMESH_Group - # @ingroup l2_grps_create def MakeGroupByIds(self, groupName, elementType, elemIDs): + """ + Create a mesh group by the given ids of elements + + Parameters: + groupName: the name of the mesh group + elementType: the type of elements in the group; either of + (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). + elemIDs: either the list of ids, group, sub-mesh, or filter + + Returns: + SMESH_Group + """ + group = self.mesh.CreateGroup(elementType, groupName) if isinstance( elemIDs, Mesh ): elemIDs = elemIDs.GetMesh() @@ -2037,19 +2429,6 @@ class Mesh: group.Add(elemIDs) return group - ## Create a mesh group by the given conditions - # @param groupName the name of the mesh group - # @param elementType the type of elements(SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) - # @param CritType the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.) - # Type SMESH.FunctorType._items in the Python Console to see all values. - # Note that the items starting from FT_LessThan are not suitable for CritType. - # @param Compare belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo} - # @param Threshold the threshold value (range of ids as string, shape, numeric) - # @param UnaryOp SMESH.FT_LogicalNOT or SMESH.FT_Undefined - # @param Tolerance the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface, - # SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces criteria - # @return SMESH_GroupOnFilter - # @ingroup l2_grps_create def MakeGroup(self, groupName, elementType, @@ -2058,59 +2437,106 @@ class Mesh: Threshold="", UnaryOp=FT_Undefined, Tolerance=1e-07): + """ + Create a mesh group by the given conditions + + Parameters: + groupName: the name of the mesh group + elementType: the type of elements(SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) + CritType: the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.) + Type SMESH.FunctorType._items in the Python Console to see all values. + Note that the items starting from FT_LessThan are not suitable for CritType. + Compare: belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo} + Threshold: the threshold value (range of ids as string, shape, numeric) + UnaryOp: SMESH.FT_LogicalNOT or SMESH.FT_Undefined + Tolerance: the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface, + SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces criteria + + Returns: + SMESH_GroupOnFilter + """ + aCriterion = self.smeshpyD.GetCriterion(elementType, CritType, Compare, Threshold, UnaryOp, FT_Undefined,Tolerance) group = self.MakeGroupByCriterion(groupName, aCriterion) return group - ## Create a mesh group by the given criterion - # @param groupName the name of the mesh group - # @param Criterion the instance of Criterion class - # @return SMESH_GroupOnFilter - # @ingroup l2_grps_create def MakeGroupByCriterion(self, groupName, Criterion): + """ + Create a mesh group by the given criterion + + Parameters: + groupName: the name of the mesh group + Criterion: the instance of Criterion class + + Returns: + SMESH_GroupOnFilter + """ + return self.MakeGroupByCriteria( groupName, [Criterion] ) - ## Create a mesh group by the given criteria (list of criteria) - # @param groupName the name of the mesh group - # @param theCriteria the list of criteria - # @param binOp binary operator used when binary operator of criteria is undefined - # @return SMESH_GroupOnFilter - # @ingroup l2_grps_create def MakeGroupByCriteria(self, groupName, theCriteria, binOp=SMESH.FT_LogicalAND): + """ + Create a mesh group by the given criteria (list of criteria) + + Parameters: + groupName: the name of the mesh group + theCriteria: the list of criteria + binOp: binary operator used when binary operator of criteria is undefined + + Returns: + SMESH_GroupOnFilter + """ + aFilter = self.smeshpyD.GetFilterFromCriteria( theCriteria, binOp ) group = self.MakeGroupByFilter(groupName, aFilter) return group - ## Create a mesh group by the given filter - # @param groupName the name of the mesh group - # @param theFilter the instance of Filter class - # @return SMESH_GroupOnFilter - # @ingroup l2_grps_create def MakeGroupByFilter(self, groupName, theFilter): + """ + Create a mesh group by the given filter + + Parameters: + groupName: the name of the mesh group + theFilter: the instance of Filter class + + Returns: + SMESH_GroupOnFilter + """ + #group = self.CreateEmptyGroup(theFilter.GetElementType(), groupName) #theFilter.SetMesh( self.mesh ) #group.AddFrom( theFilter ) group = self.GroupOnFilter( theFilter.GetElementType(), groupName, theFilter ) return group - ## Remove a group - # @ingroup l2_grps_delete def RemoveGroup(self, group): + """ + Remove a group + """ + self.mesh.RemoveGroup(group) - ## Remove a group with its contents - # @ingroup l2_grps_delete def RemoveGroupWithContents(self, group): + """ + Remove a group with its contents + """ + self.mesh.RemoveGroupWithContents(group) - ## Get the list of groups existing in the mesh in the order - # of creation (starting from the oldest one) - # @param elemType type of elements the groups contain; either of - # (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); - # by default groups of elements of all types are returned - # @return a sequence of SMESH_GroupBase - # @ingroup l2_grps_create def GetGroups(self, elemType = SMESH.ALL): + """ + Get the list of groups existing in the mesh in the order + of creation (starting from the oldest one) + + Parameters: + elemType: type of elements the groups contain; either of + (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); + by default groups of elements of all types are returned + + Returns: + a sequence of SMESH_GroupBase + """ + groups = self.mesh.GetGroups() if elemType == SMESH.ALL: return groups @@ -2122,194 +2548,279 @@ class Mesh: pass return typedGroups - ## Get the number of groups existing in the mesh - # @return the quantity of groups as an integer value - # @ingroup l2_grps_create def NbGroups(self): + """ + Get the number of groups existing in the mesh + + Returns: + the quantity of groups as an integer value + """ + return self.mesh.NbGroups() - ## Get the list of names of groups existing in the mesh - # @return list of strings - # @ingroup l2_grps_create def GetGroupNames(self): + """ + Get the list of names of groups existing in the mesh + + Returns: + list of strings + """ + groups = self.GetGroups() names = [] for group in groups: names.append(group.GetName()) return names - ## Find groups by name and type - # @param name name of the group of interest - # @param elemType type of elements the groups contain; either of - # (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); - # by default one group of any type of elements is returned - # if elemType == SMESH.ALL then all groups of any type are returned - # @return a list of SMESH_GroupBase's - # @ingroup l2_grps_create def GetGroupByName(self, name, elemType = None): + """ + Find groups by name and type + + Parameters: + name: name of the group of interest + elemType: type of elements the groups contain; either of + (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); + by default one group of any type of elements is returned + if elemType == SMESH.ALL then all groups of any type are returned + + Returns: + a list of SMESH_GroupBase's + """ + groups = [] for group in self.GetGroups(): if group.GetName() == name: if elemType is None: return [group] - if ( elemType == SMESH.ALL or + if ( elemType == SMESH.ALL or group.GetType() == elemType ): groups.append( group ) return groups - ## Produce a union of two groups. - # A new group is created. All mesh elements that are - # present in the initial groups are added to the new one - # @return an instance of SMESH_Group - # @ingroup l2_grps_operon def UnionGroups(self, group1, group2, name): + """ + Produce a union of two groups. + A new group is created. All mesh elements that are + present in the initial groups are added to the new one + + Parameters: + an instance of SMESH_Group + """ + return self.mesh.UnionGroups(group1, group2, name) - ## Produce a union list of groups. - # New group is created. All mesh elements that are present in - # initial groups are added to the new one - # @return an instance of SMESH_Group - # @ingroup l2_grps_operon def UnionListOfGroups(self, groups, name): - return self.mesh.UnionListOfGroups(groups, name) + """ + Produce a union list of groups. + New group is created. All mesh elements that are present in + initial groups are added to the new one - ## Prodice an intersection of two groups. - # A new group is created. All mesh elements that are common - # for the two initial groups are added to the new one. - # @return an instance of SMESH_Group - # @ingroup l2_grps_operon - def IntersectGroups(self, group1, group2, name): - return self.mesh.IntersectGroups(group1, group2, name) + Returns: + an instance of SMESH_Group + """ + + return self.mesh.UnionListOfGroups(groups, name) + + def IntersectGroups(self, group1, group2, name): + """ + Prodice an intersection of two groups. + A new group is created. All mesh elements that are common + for the two initial groups are added to the new one. + + Returns: + an instance of SMESH_Group + """ + + return self.mesh.IntersectGroups(group1, group2, name) - ## Produce an intersection of groups. - # New group is created. All mesh elements that are present in all - # initial groups simultaneously are added to the new one - # @return an instance of SMESH_Group - # @ingroup l2_grps_operon def IntersectListOfGroups(self, groups, name): - return self.mesh.IntersectListOfGroups(groups, name) + """ + Produce an intersection of groups. + New group is created. All mesh elements that are present in all + initial groups simultaneously are added to the new one + + Returns: + an instance of SMESH_Group + """ + + return self.mesh.IntersectListOfGroups(groups, name) - ## Produce a cut of two groups. - # A new group is created. All mesh elements that are present in - # the main group but are not present in the tool group are added to the new one - # @return an instance of SMESH_Group - # @ingroup l2_grps_operon def CutGroups(self, main_group, tool_group, name): + """ + Produce a cut of two groups. + A new group is created. All mesh elements that are present in + the main group but are not present in the tool group are added to the new one + + Returns: + an instance of SMESH_Group + """ + return self.mesh.CutGroups(main_group, tool_group, name) - ## Produce a cut of groups. - # A new group is created. All mesh elements that are present in main groups - # but do not present in tool groups are added to the new one - # @return an instance of SMESH_Group - # @ingroup l2_grps_operon def CutListOfGroups(self, main_groups, tool_groups, name): + """ + Produce a cut of groups. + A new group is created. All mesh elements that are present in main groups + but do not present in tool groups are added to the new one + + Returns: + an instance of SMESH_Group + """ + return self.mesh.CutListOfGroups(main_groups, tool_groups, name) - ## - # Create a standalone group of entities basing on nodes of other groups. - # \param groups - list of reference groups, sub-meshes or filters, of any type. - # \param elemType - a type of elements to include to the new group; either of - # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). - # \param name - a name of the new group. - # \param nbCommonNodes - a criterion of inclusion of an element to the new group - # basing on number of element nodes common with reference \a groups. - # Meaning of possible values are: - # - SMESH.ALL_NODES - include if all nodes are common, - # - SMESH.MAIN - include if all corner nodes are common (meaningful for a quadratic mesh), - # - SMESH.AT_LEAST_ONE - include if one or more node is common, - # - SMEHS.MAJORITY - include if half of nodes or more are common. - # \param underlyingOnly - if \c True (default), an element is included to the - # new group provided that it is based on nodes of an element of \a groups; - # in this case the reference \a groups are supposed to be of higher dimension - # than \a elemType, which can be useful for example to get all faces lying on - # volumes of the reference \a groups. - # @return an instance of SMESH_Group - # @ingroup l2_grps_operon def CreateDimGroup(self, groups, elemType, name, nbCommonNodes = SMESH.ALL_NODES, underlyingOnly = True): + """ + Create a standalone group of entities basing on nodes of other groups. + + Parameters: + groups: list of reference groups, sub-meshes or filters, of any type. + elemType: a type of elements to include to the new group; either of + (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). + name: a name of the new group. + nbCommonNodes: a criterion of inclusion of an element to the new group + basing on number of element nodes common with reference *groups*. + Meaning of possible values are: + + - SMESH.ALL_NODES - include if all nodes are common, + - SMESH.MAIN - include if all corner nodes are common (meaningful for a quadratic mesh), + - SMESH.AT_LEAST_ONE - include if one or more node is common, + - SMEHS.MAJORITY - include if half of nodes or more are common. + underlyingOnly: if *True* (default), an element is included to the + new group provided that it is based on nodes of an element of *groups*; + in this case the reference *groups* are supposed to be of higher dimension + than *elemType*, which can be useful for example to get all faces lying on + volumes of the reference *groups*. + + Returns: + an instance of SMESH_Group + """ + if isinstance( groups, SMESH._objref_SMESH_IDSource ): groups = [groups] return self.mesh.CreateDimGroup(groups, elemType, name, nbCommonNodes, underlyingOnly) - ## Convert group on geom into standalone group - # @ingroup l2_grps_operon def ConvertToStandalone(self, group): + """ + Convert group on geom into standalone group + """ + return self.mesh.ConvertToStandalone(group) # Get some info about mesh: # ------------------------ - ## Return the log of nodes and elements added or removed - # since the previous clear of the log. - # @param clearAfterGet log is emptied after Get (safe if concurrents access) - # @return list of log_block structures: - # commandType - # number - # coords - # indexes - # @ingroup l1_auxiliary def GetLog(self, clearAfterGet): + """ + Return the log of nodes and elements added or removed + since the previous clear of the log. + + Parameters: + clearAfterGet: log is emptied after Get (safe if concurrents access) + + Returns: + list of log_block structures: + commandType + number + coords + indexes + """ + return self.mesh.GetLog(clearAfterGet) - ## Clear the log of nodes and elements added or removed since the previous - # clear. Must be used immediately after GetLog if clearAfterGet is false. - # @ingroup l1_auxiliary def ClearLog(self): + """ + Clear the log of nodes and elements added or removed since the previous + clear. Must be used immediately after GetLog if clearAfterGet is false. + """ + self.mesh.ClearLog() - ## Toggle auto color mode on the object. - # @param theAutoColor the flag which toggles auto color mode. - # - # If switched on, a default color of a new group in Create Group dialog is chosen randomly. - # @ingroup l1_grouping def SetAutoColor(self, theAutoColor): + """ + Toggle auto color mode on the object. + + Parameters: + theAutoColor: the flag which toggles auto color mode. + If switched on, a default color of a new group in Create Group dialog is chosen randomly. + """ + self.mesh.SetAutoColor(theAutoColor) - ## Get flag of object auto color mode. - # @return True or False - # @ingroup l1_grouping def GetAutoColor(self): + """ + Get flag of object auto color mode. + + Returns: + True or False + """ + return self.mesh.GetAutoColor() - ## Get the internal ID - # @return integer value, which is the internal Id of the mesh - # @ingroup l1_auxiliary def GetId(self): + """ + Get the internal ID + + Returns: + integer value, which is the internal Id of the mesh + """ + return self.mesh.GetId() - ## Get the study Id - # @return integer value, which is the study Id of the mesh - # @ingroup l1_auxiliary def GetStudyId(self): + """ + Get the study Id + + Returns: + integer value, which is the study Id of the mesh + """ + return self.mesh.GetStudyId() - ## Check the group names for duplications. - # Consider the maximum group name length stored in MED file. - # @return True or False - # @ingroup l1_grouping def HasDuplicatedGroupNamesMED(self): + """ + Check the group names for duplications. + Consider the maximum group name length stored in MED file. + + Returns: + True or False + """ + return self.mesh.HasDuplicatedGroupNamesMED() - ## Obtain the mesh editor tool - # @return an instance of SMESH_MeshEditor - # @ingroup l1_modifying def GetMeshEditor(self): + """ + Obtain the mesh editor tool + + Returns: + an instance of SMESH_MeshEditor + """ + return self.editor - ## Wrap a list of IDs of elements or nodes into SMESH_IDSource which - # can be passed as argument to a method accepting mesh, group or sub-mesh - # @param ids list of IDs - # @param elemType type of elements; this parameter is used to distinguish - # IDs of nodes from IDs of elements; by default ids are treated as - # IDs of elements; use SMESH.NODE if ids are IDs of nodes. - # @return an instance of SMESH_IDSource - # @warning call UnRegister() for the returned object as soon as it is no more useful: - # idSrc = mesh.GetIDSource( [1,3,5], SMESH.NODE ) - # mesh.DoSomething( idSrc ) - # idSrc.UnRegister() - # @ingroup l1_auxiliary def GetIDSource(self, ids, elemType = SMESH.ALL): + """ + Wrap a list of IDs of elements or nodes into SMESH_IDSource which + can be passed as argument to a method accepting mesh, group or sub-mesh + + Parameters: + ids: list of IDs + lemType: type of elements; this parameter is used to distinguish + IDs of nodes from IDs of elements; by default ids are treated as + IDs of elements; use SMESH.NODE if ids are IDs of nodes. + + Returns: + an instance of SMESH_IDSource + + Warning: + call UnRegister() for the returned object as soon as it is no more useful: + idSrc = mesh.GetIDSource( [1,3,5], SMESH.NODE ) + mesh.DoSomething( idSrc ) + idSrc.UnRegister() + """ + if isinstance( ids, int ): ids = [ids] return self.editor.MakeIDSource(ids, elemType) @@ -2318,440 +2829,703 @@ class Mesh: # Get information about mesh contents: # ------------------------------------ - ## Get the mesh statistic - # @return dictionary type element - count of elements - # @ingroup l1_meshinfo def GetMeshInfo(self, obj = None): + """ + Get the mesh statistic + + Returns: + dictionary type element - count of elements + """ + if not obj: obj = self.mesh return self.smeshpyD.GetMeshInfo(obj) - ## Return the number of nodes in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbNodes(self): + """ + Return the number of nodes in the mesh + + Returns: + an integer value + """ + return self.mesh.NbNodes() - ## Return the number of elements in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbElements(self): + """ + Return the number of elements in the mesh + + Returns: + an integer value + """ + return self.mesh.NbElements() - ## Return the number of 0d elements in the mesh - # @return an integer value - # @ingroup l1_meshinfo def Nb0DElements(self): + """ + Return the number of 0d elements in the mesh + + Returns: + an integer value + """ + return self.mesh.Nb0DElements() - ## Return the number of ball discrete elements in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbBalls(self): + """ + Return the number of ball discrete elements in the mesh + + Returns: + an integer value + """ + return self.mesh.NbBalls() - ## Return the number of edges in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbEdges(self): + """ + Return the number of edges in the mesh + + Returns: + an integer value + """ + return self.mesh.NbEdges() - ## Return the number of edges with the given order in the mesh - # @param elementOrder the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo def NbEdgesOfOrder(self, elementOrder): + """ + Return the number of edges with the given order in the mesh + + Parameters: + elementOrder: the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbEdgesOfOrder(elementOrder) - ## Return the number of faces in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbFaces(self): + """ + Return the number of faces in the mesh + + Returns: + an integer value + """ + return self.mesh.NbFaces() - ## Return the number of faces with the given order in the mesh - # @param elementOrder the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo def NbFacesOfOrder(self, elementOrder): + """ + Return the number of faces with the given order in the mesh + + Parameters: + elementOrder: the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbFacesOfOrder(elementOrder) - ## Return the number of triangles in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbTriangles(self): + """ + Return the number of triangles in the mesh + + Returns: + an integer value + """ + return self.mesh.NbTriangles() - ## Return the number of triangles with the given order in the mesh - # @param elementOrder is the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo def NbTrianglesOfOrder(self, elementOrder): + """ + Return the number of triangles with the given order in the mesh + + Parameters: + elementOrder: is the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbTrianglesOfOrder(elementOrder) - ## Return the number of biquadratic triangles in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbBiQuadTriangles(self): + """ + Return the number of biquadratic triangles in the mesh + + Returns: + an integer value + """ + return self.mesh.NbBiQuadTriangles() - ## Return the number of quadrangles in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbQuadrangles(self): + """ + Return the number of quadrangles in the mesh + + Returns: + an integer value + """ + return self.mesh.NbQuadrangles() - ## Return the number of quadrangles with the given order in the mesh - # @param elementOrder the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo def NbQuadranglesOfOrder(self, elementOrder): + """ + Return the number of quadrangles with the given order in the mesh + + Parameters: + elementOrder the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbQuadranglesOfOrder(elementOrder) - ## Return the number of biquadratic quadrangles in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbBiQuadQuadrangles(self): + """ + Return the number of biquadratic quadrangles in the mesh + + Returns: + an integer value + """ + return self.mesh.NbBiQuadQuadrangles() - ## Return the number of polygons of given order in the mesh - # @param elementOrder the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo def NbPolygons(self, elementOrder = SMESH.ORDER_ANY): + """ + Return the number of polygons of given order in the mesh + + Parameters: + elementOrder: the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbPolygonsOfOrder(elementOrder) - ## Return the number of volumes in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbVolumes(self): + """ + Return the number of volumes in the mesh + + Returns: + an integer value + """ + return self.mesh.NbVolumes() - ## Return the number of volumes with the given order in the mesh - # @param elementOrder the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo + def NbVolumesOfOrder(self, elementOrder): + """ + Return the number of volumes with the given order in the mesh + + Parameters: + elementOrder: the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbVolumesOfOrder(elementOrder) - ## Return the number of tetrahedrons in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbTetras(self): + """ + Return the number of tetrahedrons in the mesh + + Returns: + an integer value + """ + return self.mesh.NbTetras() - ## Return the number of tetrahedrons with the given order in the mesh - # @param elementOrder the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo def NbTetrasOfOrder(self, elementOrder): + """ + Return the number of tetrahedrons with the given order in the mesh + + Parameters: + elementOrder: the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbTetrasOfOrder(elementOrder) - ## Return the number of hexahedrons in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbHexas(self): + """ + Return the number of hexahedrons in the mesh + + Returns: + an integer value + """ + return self.mesh.NbHexas() - ## Return the number of hexahedrons with the given order in the mesh - # @param elementOrder the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo def NbHexasOfOrder(self, elementOrder): + """ + Return the number of hexahedrons with the given order in the mesh + + Parameters: + elementOrder: the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbHexasOfOrder(elementOrder) - ## Return the number of triquadratic hexahedrons in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbTriQuadraticHexas(self): + """ + Return the number of triquadratic hexahedrons in the mesh + + Returns: + an integer value + """ + return self.mesh.NbTriQuadraticHexas() - ## Return the number of pyramids in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbPyramids(self): + """ + Return the number of pyramids in the mesh + + Returns: + an integer value + """ + return self.mesh.NbPyramids() - ## Return the number of pyramids with the given order in the mesh - # @param elementOrder the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo def NbPyramidsOfOrder(self, elementOrder): + """ + Return the number of pyramids with the given order in the mesh + + Parameters: + elementOrder: the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbPyramidsOfOrder(elementOrder) - ## Return the number of prisms in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbPrisms(self): + """ + Return the number of prisms in the mesh + + Returns: + an integer value + """ + return self.mesh.NbPrisms() - ## Return the number of prisms with the given order in the mesh - # @param elementOrder the order of elements: - # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC - # @return an integer value - # @ingroup l1_meshinfo def NbPrismsOfOrder(self, elementOrder): + """ + Return the number of prisms with the given order in the mesh + + Parameters: + elementOrder: the order of elements: + SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC + + Returns: + an integer value + """ + return self.mesh.NbPrismsOfOrder(elementOrder) - ## Return the number of hexagonal prisms in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbHexagonalPrisms(self): + """ + Return the number of hexagonal prisms in the mesh + + Returns: + an integer value + """ + return self.mesh.NbHexagonalPrisms() - ## Return the number of polyhedrons in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbPolyhedrons(self): + """ + Return the number of polyhedrons in the mesh + + Returns: + an integer value + """ + return self.mesh.NbPolyhedrons() - ## Return the number of submeshes in the mesh - # @return an integer value - # @ingroup l1_meshinfo def NbSubMesh(self): + """ + Return the number of submeshes in the mesh + + Returns: + an integer value + """ + return self.mesh.NbSubMesh() - ## Return the list of mesh elements IDs - # @return the list of integer values - # @ingroup l1_meshinfo def GetElementsId(self): + """ + Return the list of mesh elements IDs + + Returns: + the list of integer values + """ + return self.mesh.GetElementsId() - ## Return the list of IDs of mesh elements with the given type - # @param elementType the required type of elements, either of - # (SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME) - # @return list of integer values - # @ingroup l1_meshinfo def GetElementsByType(self, elementType): + """ + Return the list of IDs of mesh elements with the given type + + Parameters: + elementType: the required type of elements, either of + (SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME) + + Returns: + list of integer values + """ + return self.mesh.GetElementsByType(elementType) - ## Return the list of mesh nodes IDs - # @return the list of integer values - # @ingroup l1_meshinfo def GetNodesId(self): + """ + Return the list of mesh nodes IDs + + Returns: + the list of integer values + """ + return self.mesh.GetNodesId() # Get the information about mesh elements: # ------------------------------------ - ## Return the type of mesh element - # @return the value from SMESH::ElementType enumeration - # Type SMESH.ElementType._items in the Python Console to see all possible values. - # @ingroup l1_meshinfo def GetElementType(self, id, iselem=True): + """ + Return the type of mesh element + + Returns: + the value from SMESH::ElementType enumeration + Type SMESH.ElementType._items in the Python Console to see all possible values. + """ + return self.mesh.GetElementType(id, iselem) - ## Return the geometric type of mesh element - # @return the value from SMESH::EntityType enumeration - # Type SMESH.EntityType._items in the Python Console to see all possible values. - # @ingroup l1_meshinfo def GetElementGeomType(self, id): + """ + Return the geometric type of mesh element + + Returns: + the value from SMESH::EntityType enumeration + Type SMESH.EntityType._items in the Python Console to see all possible values. + """ + return self.mesh.GetElementGeomType(id) - ## Return the shape type of mesh element - # @return the value from SMESH::GeometryType enumeration. - # Type SMESH.GeometryType._items in the Python Console to see all possible values. - # @ingroup l1_meshinfo def GetElementShape(self, id): + """ + Return the shape type of mesh element + + Returns: + the value from SMESH::GeometryType enumeration. + Type SMESH.GeometryType._items in the Python Console to see all possible values. + """ + return self.mesh.GetElementShape(id) - ## Return the list of submesh elements IDs - # @param Shape a geom object(sub-shape) - # Shape must be the sub-shape of a ShapeToMesh() - # @return the list of integer values - # @ingroup l1_meshinfo def GetSubMeshElementsId(self, Shape): + """ + Return the list of submesh elements IDs + + Parameters: + Shape: a geom object(sub-shape) + Shape must be the sub-shape of a ShapeToMesh() + + Returns: + the list of integer values + """ + if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object): ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape ) else: ShapeID = Shape return self.mesh.GetSubMeshElementsId(ShapeID) - ## Return the list of submesh nodes IDs - # @param Shape a geom object(sub-shape) - # Shape must be the sub-shape of a ShapeToMesh() - # @param all If true, gives all nodes of submesh elements, otherwise gives only submesh nodes - # @return the list of integer values - # @ingroup l1_meshinfo def GetSubMeshNodesId(self, Shape, all): + """ + Return the list of submesh nodes IDs + + Parameters: + Shape: a geom object(sub-shape) + Shape must be the sub-shape of a ShapeToMesh() + all: If true, gives all nodes of submesh elements, otherwise gives only submesh nodes + + Returns: + the list of integer values + """ + if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object): ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape ) else: ShapeID = Shape return self.mesh.GetSubMeshNodesId(ShapeID, all) - ## Return type of elements on given shape - # @param Shape a geom object(sub-shape) - # Shape must be a sub-shape of a ShapeToMesh() - # @return element type - # @ingroup l1_meshinfo def GetSubMeshElementType(self, Shape): + """ + Return type of elements on given shape + + Parameters: + Shape: a geom object(sub-shape) + Shape must be a sub-shape of a ShapeToMesh() + + Returns: + element type + """ + if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object): ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape ) else: ShapeID = Shape return self.mesh.GetSubMeshElementType(ShapeID) - ## Get the mesh description - # @return string value - # @ingroup l1_meshinfo def Dump(self): + """ + Get the mesh description + + Returns: + string value + """ + return self.mesh.Dump() # Get the information about nodes and elements of a mesh by its IDs: # ----------------------------------------------------------- - ## Get XYZ coordinates of a node - # \n If there is no nodes for the given ID - return an empty list - # @return a list of double precision values - # @ingroup l1_meshinfo def GetNodeXYZ(self, id): + """ + Get XYZ coordinates of a node + If there is no nodes for the given ID - return an empty list + + Returns: + a list of double precision values + """ + return self.mesh.GetNodeXYZ(id) - ## Return list of IDs of inverse elements for the given node - # \n If there is no node for the given ID - return an empty list - # @return a list of integer values - # @ingroup l1_meshinfo def GetNodeInverseElements(self, id): + """ + Return list of IDs of inverse elements for the given node + If there is no node for the given ID - return an empty list + + Returns: + a list of integer values + """ + return self.mesh.GetNodeInverseElements(id) - ## Return the position of a node on the shape - # @return SMESH::NodePosition - # @ingroup l1_meshinfo def GetNodePosition(self,NodeID): + """ + Return the position of a node on the shape + + Returns: + SMESH::NodePosition + """ + return self.mesh.GetNodePosition(NodeID) - ## Return the position of an element on the shape - # @return SMESH::ElementPosition - # @ingroup l1_meshinfo def GetElementPosition(self,ElemID): + """ + Return the position of an element on the shape + + Returns: + SMESH::ElementPosition + """ + return self.mesh.GetElementPosition(ElemID) - ## Return the ID of the shape, on which the given node was generated. - # @return an integer value > 0 or -1 if there is no node for the given - # ID or the node is not assigned to any geometry - # @ingroup l1_meshinfo def GetShapeID(self, id): + """ + Return the ID of the shape, on which the given node was generated. + + Returns: + an integer value > 0 or -1 if there is no node for the given + ID or the node is not assigned to any geometry + """ + return self.mesh.GetShapeID(id) - ## Return the ID of the shape, on which the given element was generated. - # @return an integer value > 0 or -1 if there is no element for the given - # ID or the element is not assigned to any geometry - # @ingroup l1_meshinfo def GetShapeIDForElem(self,id): + """ + Return the ID of the shape, on which the given element was generated. + + Returns: + an integer value > 0 or -1 if there is no element for the given + ID or the element is not assigned to any geometry + """ + return self.mesh.GetShapeIDForElem(id) - ## Return the number of nodes of the given element - # @return an integer value > 0 or -1 if there is no element for the given ID - # @ingroup l1_meshinfo def GetElemNbNodes(self, id): + """ + Return the number of nodes of the given element + + Returns: + an integer value > 0 or -1 if there is no element for the given ID + """ + return self.mesh.GetElemNbNodes(id) - ## Return the node ID the given (zero based) index for the given element - # \n If there is no element for the given ID - return -1 - # \n If there is no node for the given index - return -2 - # @return an integer value - # @ingroup l1_meshinfo def GetElemNode(self, id, index): + """ + Return the node ID the given (zero based) index for the given element + If there is no element for the given ID - return -1 + If there is no node for the given index - return -2 + + Returns: + an integer value + """ + return self.mesh.GetElemNode(id, index) - ## Return the IDs of nodes of the given element - # @return a list of integer values - # @ingroup l1_meshinfo def GetElemNodes(self, id): + """ + Return the IDs of nodes of the given element + + Returns: + a list of integer values + """ + return self.mesh.GetElemNodes(id) - ## Return true if the given node is the medium node in the given quadratic element - # @ingroup l1_meshinfo def IsMediumNode(self, elementID, nodeID): + """ + Return true if the given node is the medium node in the given quadratic element + """ + return self.mesh.IsMediumNode(elementID, nodeID) - ## Return true if the given node is the medium node in one of quadratic elements - # @param nodeID ID of the node - # @param elementType the type of elements to check a state of the node, either of - # (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME) - # @ingroup l1_meshinfo def IsMediumNodeOfAnyElem(self, nodeID, elementType = SMESH.ALL ): + """ + Return true if the given node is the medium node in one of quadratic elements + + Parameters: + nodeID: ID of the node + elementType: the type of elements to check a state of the node, either of + (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME) + """ + return self.mesh.IsMediumNodeOfAnyElem(nodeID, elementType) - ## Return the number of edges for the given element - # @ingroup l1_meshinfo def ElemNbEdges(self, id): + """ + Return the number of edges for the given element + """ + return self.mesh.ElemNbEdges(id) - ## Return the number of faces for the given element - # @ingroup l1_meshinfo def ElemNbFaces(self, id): + """ + Return the number of faces for the given element + """ + return self.mesh.ElemNbFaces(id) - ## Return nodes of given face (counted from zero) for given volumic element. - # @ingroup l1_meshinfo def GetElemFaceNodes(self,elemId, faceIndex): + """ + Return nodes of given face (counted from zero) for given volumic element. + """ + return self.mesh.GetElemFaceNodes(elemId, faceIndex) - ## Return three components of normal of given mesh face - # (or an empty array in KO case) - # @ingroup l1_meshinfo def GetFaceNormal(self, faceId, normalized=False): + """ + Return three components of normal of given mesh face + (or an empty array in KO case) + """ + return self.mesh.GetFaceNormal(faceId,normalized) - ## Return an element based on all given nodes. - # @ingroup l1_meshinfo def FindElementByNodes(self, nodes): + """ + Return an element based on all given nodes. + """ + return self.mesh.FindElementByNodes(nodes) - ## Return elements including all given nodes. - # @ingroup l1_meshinfo def GetElementsByNodes(self, nodes, elemType=SMESH.ALL): + """ + Return elements including all given nodes. + """ + return self.mesh.GetElementsByNodes( nodes, elemType ) - ## Return true if the given element is a polygon - # @ingroup l1_meshinfo def IsPoly(self, id): + """ + Return true if the given element is a polygon + """ + return self.mesh.IsPoly(id) - ## Return true if the given element is quadratic - # @ingroup l1_meshinfo def IsQuadratic(self, id): + """ + Return true if the given element is quadratic + """ + return self.mesh.IsQuadratic(id) - ## Return diameter of a ball discrete element or zero in case of an invalid \a id - # @ingroup l1_meshinfo def GetBallDiameter(self, id): + """ + Return diameter of a ball discrete element or zero in case of an invalid *id* + """ + return self.mesh.GetBallDiameter(id) - ## Return XYZ coordinates of the barycenter of the given element - # \n If there is no element for the given ID - return an empty list - # @return a list of three double values - # @ingroup l1_meshinfo def BaryCenter(self, id): + """ + Return XYZ coordinates of the barycenter of the given element + If there is no element for the given ID - return an empty list + + Returns: + a list of three double values + """ + return self.mesh.BaryCenter(id) - ## Pass mesh elements through the given filter and return IDs of fitting elements - # @param theFilter SMESH_Filter - # @return a list of ids - # @ingroup l1_controls def GetIdsFromFilter(self, theFilter): + """ + Pass mesh elements through the given filter and return IDs of fitting elements + + Parameters: + theFilter: SMESH_Filter + + Returns: + a list of ids + """ + theFilter.SetMesh( self.mesh ) return theFilter.GetIDs() # Get mesh measurements information: # ------------------------------------ - ## Verify whether a 2D mesh element has free edges (edges connected to one face only)\n - # Return a list of special structures (borders). - # @return a list of SMESH.FreeEdges.Border structure: edge id and ids of two its nodes. - # @ingroup l1_measurements def GetFreeBorders(self): + """ + Verify whether a 2D mesh element has free edges (edges connected to one face only)\n + Return a list of special structures (borders). + + Returns: + a list of SMESH.FreeEdges. Border structure:: edge id and ids of two its nodes. + """ + aFilterMgr = self.smeshpyD.CreateFilterManager() aPredicate = aFilterMgr.CreateFreeEdges() aPredicate.SetMesh(self.mesh) @@ -2759,27 +3533,37 @@ class Mesh: aFilterMgr.UnRegister() return aBorders - ## Get minimum distance between two nodes, elements or distance to the origin - # @param id1 first node/element id - # @param id2 second node/element id (if 0, distance from @a id1 to the origin is computed) - # @param isElem1 @c True if @a id1 is element id, @c False if it is node id - # @param isElem2 @c True if @a id2 is element id, @c False if it is node id - # @return minimum distance value - # @sa GetMinDistance() - # @ingroup l1_measurements def MinDistance(self, id1, id2=0, isElem1=False, isElem2=False): + """ + Get minimum distance between two nodes, elements or distance to the origin + + Parameters: + id1: first node/element id + id2: second node/element id (if 0, distance from @a id1 to the origin is computed) + isElem1: *True* if *id1* is element id, *False* if it is node id + isElem2: *True* if @a id2 is element id, *False* if it is node id + + Returns: + minimum distance value **GetMinDistance()** + """ + aMeasure = self.GetMinDistance(id1, id2, isElem1, isElem2) return aMeasure.value - ## Get measure structure specifying minimum distance data between two objects - # @param id1 first node/element id - # @param id2 second node/element id (if 0, distance from @a id1 to the origin is computed) - # @param isElem1 @c True if @a id1 is element id, @c False if it is node id - # @param isElem2 @c True if @a id2 is element id, @c False if it is node id - # @return Measure structure - # @sa MinDistance() - # @ingroup l1_measurements def GetMinDistance(self, id1, id2=0, isElem1=False, isElem2=False): + """ + Get measure structure specifying minimum distance data between two objects + + Parameters: + id1: first node/element id + id2: second node/element id (if 0, distance from @a id1 to the origin is computed) + isElem1: *True* if *id1* is element id, *False* if it is node id + isElem2: *True* if *id2* is element id, *False* if it is node id + + Returns: + Measure structure **MinDistance()** + """ + if isElem1: id1 = self.editor.MakeIDSource([id1], SMESH.FACE) else: @@ -2798,14 +3582,19 @@ class Mesh: genObjUnRegister([aMeasurements,id1, id2]) return aMeasure - ## Get bounding box of the specified object(s) - # @param objects single source object or list of source objects or list of nodes/elements IDs - # @param isElem if @a objects is a list of IDs, @c True value in this parameters specifies that @a objects are elements, - # @c False specifies that @a objects are nodes - # @return tuple of six values (minX, minY, minZ, maxX, maxY, maxZ) - # @sa GetBoundingBox() - # @ingroup l1_measurements def BoundingBox(self, objects=None, isElem=False): + """ + Get bounding box of the specified object(s) + + Parameters: + objects: single source object or list of source objects or list of nodes/elements IDs + isElem: if *objects* is a list of IDs, *True* value in this parameters specifies that *objects* are elements, + *False* specifies that @a objects are nodes + + Returns: + tuple of six values (minX, minY, minZ, maxX, maxY, maxZ) **GetBoundingBox()** + """ + result = self.GetBoundingBox(objects, isElem) if result is None: result = (0.0,)*6 @@ -2813,14 +3602,19 @@ class Mesh: result = (result.minX, result.minY, result.minZ, result.maxX, result.maxY, result.maxZ) return result - ## Get measure structure specifying bounding box data of the specified object(s) - # @param IDs single source object or list of source objects or list of nodes/elements IDs - # @param isElem if @a IDs is a list of IDs, @c True value in this parameters specifies that @a objects are elements, - # @c False specifies that @a objects are nodes - # @return Measure structure - # @sa BoundingBox() - # @ingroup l1_measurements def GetBoundingBox(self, IDs=None, isElem=False): + """ + Get measure structure specifying bounding box data of the specified object(s) + + Parameters: + IDs: single source object or list of source objects or list of nodes/elements IDs + isElem: if *IDs* is a list of IDs, *True* value in this parameters specifies that *objects* are elements, + *False* specifies that @a objects are nodes + + Returns: + Measure structure **BoundingBox()** + """ + if IDs is None: IDs = [self.mesh] elif isinstance(IDs, tuple): @@ -2854,55 +3648,87 @@ class Mesh: # Mesh edition (SMESH_MeshEditor functionality): # --------------------------------------------- - ## Remove the elements from the mesh by ids - # @param IDsOfElements is a list of ids of elements to remove - # @return True or False - # @ingroup l2_modif_del def RemoveElements(self, IDsOfElements): + """ + Remove the elements from the mesh by ids + + Parameters: + IDsOfElements: is a list of ids of elements to remove + + Returns: + True or False + """ + return self.editor.RemoveElements(IDsOfElements) - ## Remove nodes from mesh by ids - # @param IDsOfNodes is a list of ids of nodes to remove - # @return True or False - # @ingroup l2_modif_del def RemoveNodes(self, IDsOfNodes): + """ + Remove nodes from mesh by ids + + Parameters: + IDsOfNodes: is a list of ids of nodes to remove + + Returns: + True or False + """ + return self.editor.RemoveNodes(IDsOfNodes) - ## Remove all orphan (free) nodes from mesh - # @return number of the removed nodes - # @ingroup l2_modif_del def RemoveOrphanNodes(self): + """ + Remove all orphan (free) nodes from mesh + + Returns: + number of the removed nodes + """ + return self.editor.RemoveOrphanNodes() - ## Add a node to the mesh by coordinates - # @return Id of the new node - # @ingroup l2_modif_add def AddNode(self, x, y, z): + """ + Add a node to the mesh by coordinates + + Returns: + Id of the new node + """ + x,y,z,Parameters,hasVars = ParseParameters(x,y,z) if hasVars: self.mesh.SetParameters(Parameters) return self.editor.AddNode( x, y, z) - ## Create a 0D element on a node with given number. - # @param IDOfNode the ID of node for creation of the element. - # @param DuplicateElements to add one more 0D element to a node or not - # @return the Id of the new 0D element - # @ingroup l2_modif_add def Add0DElement( self, IDOfNode, DuplicateElements=True ): + """ + Create a 0D element on a node with given number. + + Parameters: + IDOfNode: the ID of node for creation of the element. + DuplicateElements: to add one more 0D element to a node or not + + Returns: + the Id of the new 0D element + """ + return self.editor.Add0DElement( IDOfNode, DuplicateElements ) - ## Create 0D elements on all nodes of the given elements except those - # nodes on which a 0D element already exists. - # @param theObject an object on whose nodes 0D elements will be created. - # It can be mesh, sub-mesh, group, list of element IDs or a holder - # of nodes IDs created by calling mesh.GetIDSource( nodes, SMESH.NODE ) - # @param theGroupName optional name of a group to add 0D elements created - # and/or found on nodes of \a theObject. - # @param DuplicateElements to add one more 0D element to a node or not - # @return an object (a new group or a temporary SMESH_IDSource) holding - # IDs of new and/or found 0D elements. IDs of 0D elements - # can be retrieved from the returned object by calling GetIDs() - # @ingroup l2_modif_add def Add0DElementsToAllNodes(self, theObject, theGroupName="", DuplicateElements=False): + """ + Create 0D elements on all nodes of the given elements except those + nodes on which a 0D element already exists. + + Parameters: + theObject: an object on whose nodes 0D elements will be created. + It can be mesh, sub-mesh, group, list of element IDs or a holder + of nodes IDs created by calling mesh.GetIDSource( nodes, SMESH.NODE ) + theGroupName: optional name of a group to add 0D elements created + and/or found on nodes of *theObject*. + DuplicateElements: to add one more 0D element to a node or not + + Returns: + an object (a new group or a temporary SMESH_IDSource) holding + IDs of new and/or found 0D elements. IDs of 0D elements + can be retrieved from the returned object by calling GetIDs() + """ + unRegister = genObjUnRegister() if isinstance( theObject, Mesh ): theObject = theObject.GetMesh() @@ -2911,88 +3737,146 @@ class Mesh: unRegister.set( theObject ) return self.editor.Create0DElementsOnAllNodes( theObject, theGroupName, DuplicateElements ) - ## Create a ball element on a node with given ID. - # @param IDOfNode the ID of node for creation of the element. - # @param diameter the bal diameter. - # @return the Id of the new ball element - # @ingroup l2_modif_add def AddBall(self, IDOfNode, diameter): + """ + Create a ball element on a node with given ID. + + Parameters: + IDOfNode: the ID of node for creation of the element. + diameter: the bal diameter. + + Returns: + the Id of the new ball element + """ + return self.editor.AddBall( IDOfNode, diameter ) - ## Create a linear or quadratic edge (this is determined - # by the number of given nodes). - # @param IDsOfNodes the list of node IDs for creation of the element. - # The order of nodes in this list should correspond to the description - # of MED. \n This description is located by the following link: - # http://www.code-aster.org/outils/med/html/modele_de_donnees.html#3. - # @return the Id of the new edge - # @ingroup l2_modif_add def AddEdge(self, IDsOfNodes): + """ + Create a linear or quadratic edge (this is determined + by the number of given nodes). + + Parameters: + IDsOfNodes: the list of node IDs for creation of the element. + The order of nodes in this list should correspond to the description + of MED. + This description is located by the following link: + http://www.code-aster.org/outils/med/html/modele_de_donnees.html#3. + + Returns: + the Id of the new edge + """ + return self.editor.AddEdge(IDsOfNodes) - ## Create a linear or quadratic face (this is determined - # by the number of given nodes). - # @param IDsOfNodes the list of node IDs for creation of the element. - # The order of nodes in this list should correspond to the description - # of MED. \n This description is located by the following link: - # http://www.code-aster.org/outils/med/html/modele_de_donnees.html#3. - # @return the Id of the new face - # @ingroup l2_modif_add def AddFace(self, IDsOfNodes): + """ + Create a linear or quadratic face (this is determined + by the number of given nodes). + + Parameters: + IDsOfNodes: the list of node IDs for creation of the element. + The order of nodes in this list should correspond to the description + of MED. + This description is located by the following link: + http://www.code-aster.org/outils/med/html/modele_de_donnees.html#3. + + Returns: + the Id of the new face + """ + return self.editor.AddFace(IDsOfNodes) - ## Add a polygonal face to the mesh by the list of node IDs - # @param IdsOfNodes the list of node IDs for creation of the element. - # @return the Id of the new face - # @ingroup l2_modif_add def AddPolygonalFace(self, IdsOfNodes): + """ + Add a polygonal face to the mesh by the list of node IDs + + Parameters: + IdsOfNodes: the list of node IDs for creation of the element. + + Returns: + the Id of the new face + """ + return self.editor.AddPolygonalFace(IdsOfNodes) - ## Add a quadratic polygonal face to the mesh by the list of node IDs - # @param IdsOfNodes the list of node IDs for creation of the element; - # corner nodes follow first. - # @return the Id of the new face - # @ingroup l2_modif_add def AddQuadPolygonalFace(self, IdsOfNodes): + """ + Add a quadratic polygonal face to the mesh by the list of node IDs + + Parameters: + IdsOfNodes: the list of node IDs for creation of the element; + corner nodes follow first. + + Returns: + the Id of the new face + """ + return self.editor.AddQuadPolygonalFace(IdsOfNodes) - ## Create both simple and quadratic volume (this is determined - # by the number of given nodes). - # @param IDsOfNodes the list of node IDs for creation of the element. - # The order of nodes in this list should correspond to the description - # of MED. \n This description is located by the following link: - # http://www.code-aster.org/outils/med/html/modele_de_donnees.html#3. - # @return the Id of the new volumic element - # @ingroup l2_modif_add def AddVolume(self, IDsOfNodes): + """ + Create both simple and quadratic volume (this is determined + by the number of given nodes). + + Parameters: + IDsOfNodes: the list of node IDs for creation of the element. + The order of nodes in this list should correspond to the description + of MED. + This description is located by the following link: + http://www.code-aster.org/outils/med/html/modele_de_donnees.html#3. + + Returns: + the Id of the new volumic element + """ + return self.editor.AddVolume(IDsOfNodes) - ## Create a volume of many faces, giving nodes for each face. - # @param IdsOfNodes the list of node IDs for volume creation face by face. - # @param Quantities the list of integer values, Quantities[i] - # gives the quantity of nodes in face number i. - # @return the Id of the new volumic element - # @ingroup l2_modif_add def AddPolyhedralVolume (self, IdsOfNodes, Quantities): + """ + Create a volume of many faces, giving nodes for each face. + + Parameters: + IdsOfNodes: the list of node IDs for volume creation face by face. + Quantities: the list of integer values, Quantities[i] + gives the quantity of nodes in face number i. + + Returns: + the Id of the new volumic element + """ + return self.editor.AddPolyhedralVolume(IdsOfNodes, Quantities) - ## Create a volume of many faces, giving the IDs of the existing faces. - # @param IdsOfFaces the list of face IDs for volume creation. - # - # Note: The created volume will refer only to the nodes - # of the given faces, not to the faces themselves. - # @return the Id of the new volumic element - # @ingroup l2_modif_add def AddPolyhedralVolumeByFaces (self, IdsOfFaces): + """ + Create a volume of many faces, giving the IDs of the existing faces. + + Parameters: + IdsOfFaces: the list of face IDs for volume creation. + + Note: + The created volume will refer only to the nodes + of the given faces, not to the faces themselves. + + Returns: + the Id of the new volumic element + """ + return self.editor.AddPolyhedralVolumeByFaces(IdsOfFaces) - ## @brief Binds a node to a vertex - # @param NodeID a node ID - # @param Vertex a vertex or vertex ID - # @return True if succeed else raises an exception - # @ingroup l2_modif_add def SetNodeOnVertex(self, NodeID, Vertex): + """ + **Binds** a node to a vertex + + Parameters: + NodeID: a node ID + Vertex: a vertex or vertex ID + + Returns: + True if succeed else raises an exception + """ + if ( isinstance( Vertex, geomBuilder.GEOM._objref_GEOM_Object)): VertexID = self.geompyD.GetSubShapeID( self.geom, Vertex ) else: @@ -3004,13 +3888,19 @@ class Mesh: return True - ## @brief Stores the node position on an edge - # @param NodeID a node ID - # @param Edge an edge or edge ID - # @param paramOnEdge a parameter on the edge where the node is located - # @return True if succeed else raises an exception - # @ingroup l2_modif_add def SetNodeOnEdge(self, NodeID, Edge, paramOnEdge): + """ + **Stores** the node position on an edge + + Parameters: + NodeID: a node ID + Edge: an edge or edge ID + paramOnEdge: a parameter on the edge where the node is located + + Returns: + True if succeed else raises an exception + """ + if ( isinstance( Edge, geomBuilder.GEOM._objref_GEOM_Object)): EdgeID = self.geompyD.GetSubShapeID( self.geom, Edge ) else: @@ -3021,14 +3911,20 @@ class Mesh: raise ValueError, inst.details.text return True - ## @brief Stores node position on a face - # @param NodeID a node ID - # @param Face a face or face ID - # @param u U parameter on the face where the node is located - # @param v V parameter on the face where the node is located - # @return True if succeed else raises an exception - # @ingroup l2_modif_add def SetNodeOnFace(self, NodeID, Face, u, v): + """ + **Stores** node position on a face + + Parameters: + NodeID: a node ID + Face: a face or face ID + u: U parameter on the face where the node is located + v: V parameter on the face where the node is located + + Returns: + True if succeed else raises an exception + """ + if ( isinstance( Face, geomBuilder.GEOM._objref_GEOM_Object)): FaceID = self.geompyD.GetSubShapeID( self.geom, Face ) else: @@ -3039,12 +3935,18 @@ class Mesh: raise ValueError, inst.details.text return True - ## @brief Binds a node to a solid - # @param NodeID a node ID - # @param Solid a solid or solid ID - # @return True if succeed else raises an exception - # @ingroup l2_modif_add def SetNodeInVolume(self, NodeID, Solid): + """ + **Binds** a node to a solid + + Parameters: + NodeID: a node ID + Solid: a solid or solid ID + + Returns: + True if succeed else raises an exception + """ + if ( isinstance( Solid, geomBuilder.GEOM._objref_GEOM_Object)): SolidID = self.geompyD.GetSubShapeID( self.geom, Solid ) else: @@ -3055,12 +3957,18 @@ class Mesh: raise ValueError, inst.details.text return True - ## @brief Bind an element to a shape - # @param ElementID an element ID - # @param Shape a shape or shape ID - # @return True if succeed else raises an exception - # @ingroup l2_modif_add def SetMeshElementOnShape(self, ElementID, Shape): + """ + **Bind** an element to a shape + + Parameters: + ElementID: an element ID + Shape: a shape or shape ID + + Returns: + True if succeed else raises an exception + """ + if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)): ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape ) else: @@ -3072,131 +3980,196 @@ class Mesh: return True - ## Move the node with the given id - # @param NodeID the id of the node - # @param x a new X coordinate - # @param y a new Y coordinate - # @param z a new Z coordinate - # @return True if succeed else False - # @ingroup l2_modif_edit def MoveNode(self, NodeID, x, y, z): + """ + Move the node with the given id + + Parameters: + NodeID: the id of the node + x: a new X coordinate + y: a new Y coordinate + z: a new Z coordinate + + Returns: + True if succeed else False + """ + x,y,z,Parameters,hasVars = ParseParameters(x,y,z) if hasVars: self.mesh.SetParameters(Parameters) return self.editor.MoveNode(NodeID, x, y, z) - ## Find the node closest to a point and moves it to a point location - # @param x the X coordinate of a point - # @param y the Y coordinate of a point - # @param z the Z coordinate of a point - # @param NodeID if specified (>0), the node with this ID is moved, - # otherwise, the node closest to point (@a x,@a y,@a z) is moved - # @return the ID of a node - # @ingroup l2_modif_edit def MoveClosestNodeToPoint(self, x, y, z, NodeID): + """ + Find the node closest to a point and moves it to a point location + + Parameters: + x: the X coordinate of a point + y: the Y coordinate of a point + z: the Z coordinate of a point + NodeID: if specified (>0), the node with this ID is moved, + otherwise, the node closest to point (@a x,@a y,@a z) is moved + + Returns: + the ID of a node + """ + x,y,z,Parameters,hasVars = ParseParameters(x,y,z) if hasVars: self.mesh.SetParameters(Parameters) return self.editor.MoveClosestNodeToPoint(x, y, z, NodeID) - ## Find the node closest to a point - # @param x the X coordinate of a point - # @param y the Y coordinate of a point - # @param z the Z coordinate of a point - # @return the ID of a node - # @ingroup l1_meshinfo def FindNodeClosestTo(self, x, y, z): + """ + Find the node closest to a point + + Parameters: + x: the X coordinate of a point + y: the Y coordinate of a point + z: the Z coordinate of a point + + Returns: + the ID of a node + """ + #preview = self.mesh.GetMeshEditPreviewer() #return preview.MoveClosestNodeToPoint(x, y, z, -1) return self.editor.FindNodeClosestTo(x, y, z) - ## Find the elements where a point lays IN or ON - # @param x the X coordinate of a point - # @param y the Y coordinate of a point - # @param z the Z coordinate of a point - # @param elementType type of elements to find; either of - # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); SMESH.ALL type - # means elements of any type excluding nodes, discrete and 0D elements. - # @param meshPart a part of mesh (group, sub-mesh) to search within - # @return list of IDs of found elements - # @ingroup l1_meshinfo def FindElementsByPoint(self, x, y, z, elementType = SMESH.ALL, meshPart=None): + """ + Find the elements where a point lays IN or ON + + Parameters: + x: the X coordinate of a point + y: the Y coordinate of a point + z: the Z coordinate of a point + elementType: type of elements to find; either of + (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); SMESH.ALL type + means elements of any type excluding nodes, discrete and 0D elements. + meshPart: a part of mesh (group, sub-mesh) to search within + + Returns: + list of IDs of found elements + """ + if meshPart: return self.editor.FindAmongElementsByPoint( meshPart, x, y, z, elementType ); else: return self.editor.FindElementsByPoint(x, y, z, elementType) - ## Return point state in a closed 2D mesh in terms of TopAbs_State enumeration: - # 0-IN, 1-OUT, 2-ON, 3-UNKNOWN - # UNKNOWN state means that either mesh is wrong or the analysis fails. - # @ingroup l1_meshinfo def GetPointState(self, x, y, z): + """ + Return point state in a closed 2D mesh in terms of TopAbs_State enumeration: + 0-IN, 1-OUT, 2-ON, 3-UNKNOWN + UNKNOWN state means that either mesh is wrong or the analysis fails. + """ + return self.editor.GetPointState(x, y, z) - ## Check if a 2D mesh is manifold - # @ingroup l1_controls def IsManifold(self): + """ + Check if a 2D mesh is manifold + """ + return self.editor.IsManifold() - ## Check if orientation of 2D elements is coherent - # @ingroup l1_controls def IsCoherentOrientation2D(self): + """ + Check if orientation of 2D elements is coherent + """ + return self.editor.IsCoherentOrientation2D() - ## Find the node closest to a point and moves it to a point location - # @param x the X coordinate of a point - # @param y the Y coordinate of a point - # @param z the Z coordinate of a point - # @return the ID of a moved node - # @ingroup l2_modif_edit def MeshToPassThroughAPoint(self, x, y, z): + """ + Find the node closest to a point and moves it to a point location + + Parameters: + x: the X coordinate of a point + y: the Y coordinate of a point + z: the Z coordinate of a point + + Returns: + the ID of a moved node + """ + return self.editor.MoveClosestNodeToPoint(x, y, z, -1) - ## Replace two neighbour triangles sharing Node1-Node2 link - # with the triangles built on the same 4 nodes but having other common link. - # @param NodeID1 the ID of the first node - # @param NodeID2 the ID of the second node - # @return false if proper faces were not found - # @ingroup l2_modif_cutquadr def InverseDiag(self, NodeID1, NodeID2): + """ + Replace two neighbour triangles sharing Node1-Node2 link + with the triangles built on the same 4 nodes but having other common link. + + Parameters: + NodeID1: the ID of the first node + NodeID2: the ID of the second node + + Returns: + false if proper faces were not found + """ return self.editor.InverseDiag(NodeID1, NodeID2) - ## Replace two neighbour triangles sharing Node1-Node2 link - # with a quadrangle built on the same 4 nodes. - # @param NodeID1 the ID of the first node - # @param NodeID2 the ID of the second node - # @return false if proper faces were not found - # @ingroup l2_modif_unitetri def DeleteDiag(self, NodeID1, NodeID2): + """ + Replace two neighbour triangles sharing Node1-Node2 link + with a quadrangle built on the same 4 nodes. + + Parameters: + NodeID1: the ID of the first node + NodeID2: the ID of the second node + + Returns: + false if proper faces were not found + """ + return self.editor.DeleteDiag(NodeID1, NodeID2) - ## Reorient elements by ids - # @param IDsOfElements if undefined reorients all mesh elements - # @return True if succeed else False - # @ingroup l2_modif_changori def Reorient(self, IDsOfElements=None): + """ + Reorient elements by ids + + Parameters: + IDsOfElements: if undefined reorients all mesh elements + + Returns: + True if succeed else False + """ + if IDsOfElements == None: IDsOfElements = self.GetElementsId() return self.editor.Reorient(IDsOfElements) - ## Reorient all elements of the object - # @param theObject mesh, submesh or group - # @return True if succeed else False - # @ingroup l2_modif_changori def ReorientObject(self, theObject): + """ + Reorient all elements of the object + + Parameters: + theObject: mesh, submesh or group + + Returns: + True if succeed else False + """ + if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() return self.editor.ReorientObject(theObject) - ## Reorient faces contained in \a the2DObject. - # @param the2DObject is a mesh, sub-mesh, group or list of IDs of 2D elements - # @param theDirection is a desired direction of normal of \a theFace. - # It can be either a GEOM vector or a list of coordinates [x,y,z]. - # @param theFaceOrPoint defines a face of \a the2DObject whose normal will be - # compared with theDirection. It can be either ID of face or a point - # by which the face will be found. The point can be given as either - # a GEOM vertex or a list of point coordinates. - # @return number of reoriented faces - # @ingroup l2_modif_changori def Reorient2D(self, the2DObject, theDirection, theFaceOrPoint ): + """ + Reorient faces contained in *the2DObject*. + + Parameters: + the2DObject: is a mesh, sub-mesh, group or list of IDs of 2D elements + theDirection: is a desired direction of normal of *theFace*. + It can be either a GEOM vector or a list of coordinates [x,y,z]. + theFaceOrPoint: defines a face of *the2DObject* whose normal will be + compared with theDirection. It can be either ID of face or a point + by which the face will be found. The point can be given as either + a GEOM vertex or a list of point coordinates. + + Returns: + number of reoriented faces + """ + unRegister = genObjUnRegister() # check the2DObject if isinstance( the2DObject, Mesh ): @@ -3223,15 +4196,21 @@ class Mesh: theFace = -1 return self.editor.Reorient2D( the2DObject, theDirection, theFace, thePoint ) - ## Reorient faces according to adjacent volumes. - # @param the2DObject is a mesh, sub-mesh, group or list of - # either IDs of faces or face groups. - # @param the3DObject is a mesh, sub-mesh, group or list of IDs of volumes. - # @param theOutsideNormal to orient faces to have their normals - # pointing either \a outside or \a inside the adjacent volumes. - # @return number of reoriented faces. - # @ingroup l2_modif_changori def Reorient2DBy3D(self, the2DObject, the3DObject, theOutsideNormal=True ): + """ + Reorient faces according to adjacent volumes. + + Parameters: + the2DObject: is a mesh, sub-mesh, group or list of + either IDs of faces or face groups. + the3DObject: is a mesh, sub-mesh, group or list of IDs of volumes. + theOutsideNormal: to orient faces to have their normals + pointing either *outside* or *inside* the adjacent volumes. + + Returns: + number of reoriented faces. + """ + unRegister = genObjUnRegister() # check the2DObject if not isinstance( the2DObject, list ): @@ -3254,18 +4233,24 @@ class Mesh: unRegister.set( the3DObject ) return self.editor.Reorient2DBy3D( the2DObject, the3DObject, theOutsideNormal ) - ## Fuse the neighbouring triangles into quadrangles. - # @param IDsOfElements The triangles to be fused. - # @param theCriterion a numerical functor, in terms of enum SMESH.FunctorType, used to - # applied to possible quadrangles to choose a neighbour to fuse with. - # Type SMESH.FunctorType._items in the Python Console to see all items. - # Note that not all items correspond to numerical functors. - # @param MaxAngle is the maximum angle between element normals at which the fusion - # is still performed; theMaxAngle is measured in radians. - # Also it could be a name of variable which defines angle in degrees. - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_unitetri def TriToQuad(self, IDsOfElements, theCriterion, MaxAngle): + """ + Fuse the neighbouring triangles into quadrangles. + + Parameters: + IDsOfElements: The triangles to be fused. + theCriterion: a numerical functor, in terms of enum SMESH.FunctorType, used to + applied to possible quadrangles to choose a neighbour to fuse with. + Type SMESH.FunctorType._items in the Python Console to see all items. + Note that not all items correspond to numerical functors. + MaxAngle: is the maximum angle between element normals at which the fusion + is still performed; theMaxAngle is measured in radians. + Also it could be a name of variable which defines angle in degrees. + + Returns: + TRUE in case of success, FALSE otherwise. + """ + MaxAngle,Parameters,hasVars = ParseAngles(MaxAngle) self.mesh.SetParameters(Parameters) if not IDsOfElements: @@ -3273,17 +4258,23 @@ class Mesh: Functor = self.smeshpyD.GetFunctor(theCriterion) return self.editor.TriToQuad(IDsOfElements, Functor, MaxAngle) - ## Fuse the neighbouring triangles of the object into quadrangles - # @param theObject is mesh, submesh or group - # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, - # applied to possible quadrangles to choose a neighbour to fuse with. - # Type SMESH.FunctorType._items in the Python Console to see all items. - # Note that not all items correspond to numerical functors. - # @param MaxAngle a max angle between element normals at which the fusion - # is still performed; theMaxAngle is measured in radians. - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_unitetri def TriToQuadObject (self, theObject, theCriterion, MaxAngle): + """ + Fuse the neighbouring triangles of the object into quadrangles + + Parameters: + theObject: is mesh, submesh or group + theCriterion: is a numerical functor, in terms of enum SMESH.FunctorType, + applied to possible quadrangles to choose a neighbour to fuse with. + Type SMESH.FunctorType._items in the Python Console to see all items. + Note that not all items correspond to numerical functors. + MaxAngle: a max angle between element normals at which the fusion + is still performed; theMaxAngle is measured in radians. + + Returns: + TRUE in case of success, FALSE otherwise. + """ + MaxAngle,Parameters,hasVars = ParseAngles(MaxAngle) self.mesh.SetParameters(Parameters) if isinstance( theObject, Mesh ): @@ -3291,16 +4282,21 @@ class Mesh: Functor = self.smeshpyD.GetFunctor(theCriterion) return self.editor.TriToQuadObject(theObject, Functor, MaxAngle) - ## Split quadrangles into triangles. - # @param IDsOfElements the faces to be splitted. - # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to - # choose a diagonal for splitting. If @a theCriterion is None, which is a default - # value, then quadrangles will be split by the smallest diagonal. - # Type SMESH.FunctorType._items in the Python Console to see all items. - # Note that not all items correspond to numerical functors. - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_cutquadr def QuadToTri (self, IDsOfElements, theCriterion = None): + """ + Split quadrangles into triangles. + + Parameters: + IDsOfElements: the faces to be splitted. + theCriterion: is a numerical functor, in terms of enum SMESH.FunctorType, used to + choose a diagonal for splitting. If @a theCriterion is None, which is a default + value, then quadrangles will be split by the smallest diagonal. + Type SMESH.FunctorType._items in the Python Console to see all items. + Note that not all items correspond to numerical functors. + + Returns: + TRUE in case of success, FALSE otherwise. + """ if IDsOfElements == []: IDsOfElements = self.GetElementsId() if theCriterion is None: @@ -3308,17 +4304,22 @@ class Mesh: Functor = self.smeshpyD.GetFunctor(theCriterion) return self.editor.QuadToTri(IDsOfElements, Functor) - ## Split quadrangles into triangles. - # @param theObject the object from which the list of elements is taken, - # this is mesh, submesh or group - # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to - # choose a diagonal for splitting. If @a theCriterion is None, which is a default - # value, then quadrangles will be split by the smallest diagonal. - # Type SMESH.FunctorType._items in the Python Console to see all items. - # Note that not all items correspond to numerical functors. - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_cutquadr def QuadToTriObject (self, theObject, theCriterion = None): + """ + Split quadrangles into triangles. + + Parameters: + theObject: the object from which the list of elements is taken, + this is mesh, submesh or group + theCriterion: is a numerical functor, in terms of enum SMESH.FunctorType, used to + choose a diagonal for splitting. If @a theCriterion is None, which is a default + value, then quadrangles will be split by the smallest diagonal. + Type SMESH.FunctorType._items in the Python Console to see all items. + Note that not all items correspond to numerical functors. + + Returns: + TRUE in case of success, FALSE otherwise. + """ if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() if theCriterion is None: @@ -3326,12 +4327,15 @@ class Mesh: Functor = self.smeshpyD.GetFunctor(theCriterion) return self.editor.QuadToTriObject(theObject, Functor) - ## Split each of given quadrangles into 4 triangles. A node is added at the center of - # a quadrangle. - # @param theElements the faces to be splitted. This can be either mesh, sub-mesh, - # group or a list of face IDs. By default all quadrangles are split - # @ingroup l2_modif_cutquadr def QuadTo4Tri (self, theElements=[]): + """ + Split each of given quadrangles into 4 triangles. A node is added at the center of + a quadrangle. + + Parameters: + theElements: the faces to be splitted. This can be either mesh, sub-mesh, + group or a list of face IDs. By default all quadrangles are split + """ unRegister = genObjUnRegister() if isinstance( theElements, Mesh ): theElements = theElements.mesh @@ -3342,46 +4346,64 @@ class Mesh: unRegister.set( theElements ) return self.editor.QuadTo4Tri( theElements ) - ## Split quadrangles into triangles. - # @param IDsOfElements the faces to be splitted - # @param Diag13 is used to choose a diagonal for splitting. - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_cutquadr def SplitQuad (self, IDsOfElements, Diag13): + """ + Split quadrangles into triangles. + + Parameters: + IDsOfElements: the faces to be splitted + Diag13: is used to choose a diagonal for splitting. + + Returns: + TRUE in case of success, FALSE otherwise. + """ if IDsOfElements == []: IDsOfElements = self.GetElementsId() return self.editor.SplitQuad(IDsOfElements, Diag13) - ## Split quadrangles into triangles. - # @param theObject the object from which the list of elements is taken, - # this is mesh, submesh or group - # @param Diag13 is used to choose a diagonal for splitting. - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_cutquadr def SplitQuadObject (self, theObject, Diag13): + """ + Split quadrangles into triangles. + + Parameters: + theObject: the object from which the list of elements is taken, + this is mesh, submesh or group + Diag13: is used to choose a diagonal for splitting. + + Returns: + TRUE in case of success, FALSE otherwise. + """ if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() return self.editor.SplitQuadObject(theObject, Diag13) - ## Find a better splitting of the given quadrangle. - # @param IDOfQuad the ID of the quadrangle to be splitted. - # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to - # choose a diagonal for splitting. - # Type SMESH.FunctorType._items in the Python Console to see all items. - # Note that not all items correspond to numerical functors. - # @return 1 if 1-3 diagonal is better, 2 if 2-4 - # diagonal is better, 0 if error occurs. - # @ingroup l2_modif_cutquadr def BestSplit (self, IDOfQuad, theCriterion): + """ + Find a better splitting of the given quadrangle. + + Parameters: + IDOfQuad: the ID of the quadrangle to be splitted. + theCriterion: is a numerical functor, in terms of enum SMESH.FunctorType, used to + choose a diagonal for splitting. + Type SMESH.FunctorType._items in the Python Console to see all items. + Note that not all items correspond to numerical functors. + + Returns: + 1 if 1-3 diagonal is better, 2 if 2-4 + diagonal is better, 0 if error occurs. + """ return self.editor.BestSplit(IDOfQuad, self.smeshpyD.GetFunctor(theCriterion)) - ## Split volumic elements into tetrahedrons - # @param elems either a list of elements or a mesh or a group or a submesh or a filter - # @param method flags passing splitting method: - # smesh.Hex_5Tet, smesh.Hex_6Tet, smesh.Hex_24Tet. - # smesh.Hex_5Tet - to split the hexahedron into 5 tetrahedrons, etc. - # @ingroup l2_modif_cutquadr def SplitVolumesIntoTetra(self, elems, method=smeshBuilder.Hex_5Tet ): + """ + Split volumic elements into tetrahedrons + + Parameters: + elems: either a list of elements or a mesh or a group or a submesh or a filter + method: flags passing splitting method: + smesh.Hex_5Tet, smesh.Hex_6Tet, smesh.Hex_24Tet. + smesh.Hex_5Tet - to split the hexahedron into 5 tetrahedrons, etc. + """ unRegister = genObjUnRegister() if isinstance( elems, Mesh ): elems = elems.GetMesh() @@ -3391,16 +4413,21 @@ class Mesh: self.editor.SplitVolumesIntoTetra(elems, method) return - ## Split bi-quadratic elements into linear ones without creation of additional nodes: - # - bi-quadratic triangle will be split into 3 linear quadrangles; - # - bi-quadratic quadrangle will be split into 4 linear quadrangles; - # - tri-quadratic hexahedron will be split into 8 linear hexahedra. - # Quadratic elements of lower dimension adjacent to the split bi-quadratic element - # will be split in order to keep the mesh conformal. - # @param elems - elements to split: sub-meshes, groups, filters or element IDs; - # if None (default), all bi-quadratic elements will be split - # @ingroup l2_modif_cutquadr def SplitBiQuadraticIntoLinear(self, elems=None): + """ + Split bi-quadratic elements into linear ones without creation of additional nodes: + + - bi-quadratic triangle will be split into 3 linear quadrangles; + - bi-quadratic quadrangle will be split into 4 linear quadrangles; + - tri-quadratic hexahedron will be split into 8 linear hexahedra. + + Quadratic elements of lower dimension adjacent to the split bi-quadratic element + will be split in order to keep the mesh conformal. + + Parameters: + elems: elements to split\: sub-meshes, groups, filters or element IDs; + if None (default), all bi-quadratic elements will be split + """ unRegister = genObjUnRegister() if elems and isinstance( elems, list ) and isinstance( elems[0], int ): elems = self.editor.MakeIDSource(elems, SMESH.ALL) @@ -3413,22 +4440,25 @@ class Mesh: elems = [elems] self.editor.SplitBiQuadraticIntoLinear( elems ) - ## Split hexahedra into prisms - # @param elems either a list of elements or a mesh or a group or a submesh or a filter - # @param startHexPoint a point used to find a hexahedron for which @a facetNormal - # gives a normal vector defining facets to split into triangles. - # @a startHexPoint can be either a triple of coordinates or a vertex. - # @param facetNormal a normal to a facet to split into triangles of a - # hexahedron found by @a startHexPoint. - # @a facetNormal can be either a triple of coordinates or an edge. - # @param method flags passing splitting method: smesh.Hex_2Prisms, smesh.Hex_4Prisms. - # smesh.Hex_2Prisms - to split the hexahedron into 2 prisms, etc. - # @param allDomains if @c False, only hexahedra adjacent to one closest - # to @a startHexPoint are split, else @a startHexPoint - # is used to find the facet to split in all domains present in @a elems. - # @ingroup l2_modif_cutquadr def SplitHexahedraIntoPrisms(self, elems, startHexPoint, facetNormal, method=smeshBuilder.Hex_2Prisms, allDomains=False ): + """ + Split hexahedra into prisms + + Parameters: + elems: either a list of elements or a mesh or a group or a submesh or a filter + startHexPoint: a point used to find a hexahedron for which @a facetNormal + gives a normal vector defining facets to split into triangles. + **startHexPoint** can be either a triple of coordinates or a vertex. + facetNormal: a normal to a facet to split into triangles of a + hexahedron found by @a startHexPoint. + **facetNormal** can be either a triple of coordinates or an edge. + method: flags passing splitting method: smesh.Hex_2Prisms, smesh.Hex_4Prisms. + smesh.Hex_2Prisms - to split the hexahedron into 2 prisms, etc. + allDomains: if :code:`False`, only hexahedra adjacent to one closest + to **startHexPoint** are split, else **startHexPoint** + is used to find the facet to split in all domains present in @a elems. + """ # IDSource unRegister = genObjUnRegister() if isinstance( elems, Mesh ): @@ -3454,10 +4484,10 @@ class Mesh: self.editor.SplitHexahedraIntoPrisms(elems, startHexPoint, facetNormal, method, allDomains) - ## Split quadrangle faces near triangular facets of volumes - # - # @ingroup l2_modif_cutquadr def SplitQuadsNearTriangularFacets(self): + """ + Split quadrangle faces near triangular facets of volumes + """ faces_array = self.GetElementsByType(SMESH.FACE) for face_id in faces_array: if self.GetElemNbNodes(face_id) == 4: # quadrangle @@ -3484,31 +4514,37 @@ class Mesh: isVolumeFound = True self.SplitQuad([face_id], True) # diagonal 1-3 - ## @brief Splits hexahedrons into tetrahedrons. - # - # This operation uses pattern mapping functionality for splitting. - # @param theObject the object from which the list of hexahedrons is taken; this is mesh, submesh or group. - # @param theNode000,theNode001 within the range [0,7]; gives the orientation of the - # pattern relatively each hexahedron: the (0,0,0) key-point of the pattern - # will be mapped into theNode000-th node of each volume, the (0,0,1) - # key-point will be mapped into theNode001-th node of each volume. - # The (0,0,0) key-point of the used pattern corresponds to a non-split corner. - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_cutquadr def SplitHexaToTetras (self, theObject, theNode000, theNode001): - # Pattern: 5.---------.6 - # /|#* /| - # / | #* / | - # / | # * / | - # / | # /* | - # (0,0,1) 4.---------.7 * | - # |#* |1 | # *| - # | # *.----|---#.2 - # | #/ * | / - # | /# * | / - # | / # * | / - # |/ #*|/ - # (0,0,0) 0.---------.3 + """ + **Splits** hexahedrons into tetrahedrons. + + This operation uses pattern mapping functionality for splitting. + + Parameters: + theObject: the object from which the list of hexahedrons is taken; this is mesh, submesh or group. + theNode000,theNode001: within the range [0,7]; gives the orientation of the + pattern relatively each hexahedron: the (0,0,0) key-point of the pattern + will be mapped into theNode000-th node of each volume, the (0,0,1) + key-point will be mapped into theNode001-th node of each volume. + The (0,0,0) key-point of the used pattern corresponds to a non-split corner. + + Returns: + TRUE in case of success, FALSE otherwise. + """ +# Pattern: +# 5.---------.6 +# /|#* /| +# / | #* / | +# / | # * / | +# / | # /* | +# (0,0,1) 4.---------.7 * | +# |#* |1 | # *| +# | # *.----|---#.2 +# | #/ * | / +# | /# * | / +# | / # * | / +# |/ #*|/ +# (0,0,0) 0.---------.3 pattern_tetra = "!!! Nb of points: \n 8 \n\ !!! Points: \n\ 0 0 0 !- 0 \n\ @@ -3542,31 +4578,36 @@ class Mesh: return isDone - ## @brief Split hexahedrons into prisms. - # - # Uses the pattern mapping functionality for splitting. - # @param theObject the object (mesh, submesh or group) from where the list of hexahedrons is taken; - # @param theNode000,theNode001 (within the range [0,7]) gives the orientation of the - # pattern relatively each hexahedron: keypoint (0,0,0) of the pattern - # will be mapped into the theNode000-th node of each volume, keypoint (0,0,1) - # will be mapped into the theNode001-th node of each volume. - # Edge (0,0,0)-(0,0,1) of used pattern connects two not split corners. - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_cutquadr def SplitHexaToPrisms (self, theObject, theNode000, theNode001): - # Pattern: 5.---------.6 - # /|# /| - # / | # / | - # / | # / | - # / | # / | - # (0,0,1) 4.---------.7 | - # | | | | - # | 1.----|----.2 - # | / * | / - # | / * | / - # | / * | / - # |/ *|/ - # (0,0,0) 0.---------.3 + """ + **Split** hexahedrons into prisms. + + Uses the pattern mapping functionality for splitting. + + Parameters: + theObject: the object (mesh, submesh or group) from where the list of hexahedrons is taken; + theNode000,theNode001: (within the range [0,7]) gives the orientation of the + pattern relatively each hexahedron: keypoint (0,0,0) of the pattern + will be mapped into the theNode000-th node of each volume, keypoint (0,0,1) + will be mapped into the theNode001-th node of each volume. + Edge (0,0,0)-(0,0,1) of used pattern connects two not split corners. + + Returns: + TRUE in case of success, FALSE otherwise. + """ +# Pattern: 5.---------.6 +# /|# /| +# / | # / | +# / | # / | +# / | # / | +# (0,0,1) 4.---------.7 | +# | | | | +# | 1.----|----.2 +# | / * | / +# | / * | / +# | / * | / +# |/ *|/ +# (0,0,0) 0.---------.3 pattern_prism = "!!! Nb of points: \n 8 \n\ !!! Points: \n\ 0 0 0 !- 0 \n\ @@ -3596,18 +4637,24 @@ class Mesh: return isDone - ## Smooth elements - # @param IDsOfElements the list if ids of elements to smooth - # @param IDsOfFixedNodes the list of ids of fixed nodes. - # Note that nodes built on edges and boundary nodes are always fixed. - # @param MaxNbOfIterations the maximum number of iterations - # @param MaxAspectRatio varies in range [1.0, inf] - # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH) - # or Centroidal (smesh.CENTROIDAL_SMOOTH) - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_smooth def Smooth(self, IDsOfElements, IDsOfFixedNodes, MaxNbOfIterations, MaxAspectRatio, Method): + """ + Smooth elements + + Parameters: + IDsOfElements: the list if ids of elements to smooth + IDsOfFixedNodes: the list of ids of fixed nodes. + Note that nodes built on edges and boundary nodes are always fixed. + MaxNbOfIterations: the maximum number of iterations + MaxAspectRatio: varies in range [1.0, inf] + Method: is either Laplacian (smesh.LAPLACIAN_SMOOTH) + or Centroidal (smesh.CENTROIDAL_SMOOTH) + + Returns: + TRUE in case of success, FALSE otherwise. + """ + if IDsOfElements == []: IDsOfElements = self.GetElementsId() MaxNbOfIterations,MaxAspectRatio,Parameters,hasVars = ParseParameters(MaxNbOfIterations,MaxAspectRatio) @@ -3615,35 +4662,47 @@ class Mesh: return self.editor.Smooth(IDsOfElements, IDsOfFixedNodes, MaxNbOfIterations, MaxAspectRatio, Method) - ## Smooth elements which belong to the given object - # @param theObject the object to smooth - # @param IDsOfFixedNodes the list of ids of fixed nodes. - # Note that nodes built on edges and boundary nodes are always fixed. - # @param MaxNbOfIterations the maximum number of iterations - # @param MaxAspectRatio varies in range [1.0, inf] - # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH) - # or Centroidal (smesh.CENTROIDAL_SMOOTH) - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_smooth def SmoothObject(self, theObject, IDsOfFixedNodes, MaxNbOfIterations, MaxAspectRatio, Method): + """ + Smooth elements which belong to the given object + + Parameters: + theObject: the object to smooth + IDsOfFixedNodes: the list of ids of fixed nodes. + Note that nodes built on edges and boundary nodes are always fixed. + MaxNbOfIterations: the maximum number of iterations + MaxAspectRatio: varies in range [1.0, inf] + Method: is either Laplacian (smesh.LAPLACIAN_SMOOTH) + or Centroidal (smesh.CENTROIDAL_SMOOTH) + + Returns: + TRUE in case of success, FALSE otherwise. + """ + if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() return self.editor.SmoothObject(theObject, IDsOfFixedNodes, MaxNbOfIterations, MaxAspectRatio, Method) - ## Parametrically smooth the given elements - # @param IDsOfElements the list if ids of elements to smooth - # @param IDsOfFixedNodes the list of ids of fixed nodes. - # Note that nodes built on edges and boundary nodes are always fixed. - # @param MaxNbOfIterations the maximum number of iterations - # @param MaxAspectRatio varies in range [1.0, inf] - # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH) - # or Centroidal (smesh.CENTROIDAL_SMOOTH) - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_smooth def SmoothParametric(self, IDsOfElements, IDsOfFixedNodes, MaxNbOfIterations, MaxAspectRatio, Method): + """ + Parametrically smooth the given elements + + Parameters: + IDsOfElements: the list if ids of elements to smooth + IDsOfFixedNodes: the list of ids of fixed nodes. + Note that nodes built on edges and boundary nodes are always fixed. + MaxNbOfIterations: the maximum number of iterations + MaxAspectRatio: varies in range [1.0, inf] + Method: is either Laplacian (smesh.LAPLACIAN_SMOOTH) + or Centroidal (smesh.CENTROIDAL_SMOOTH) + + Returns: + TRUE in case of success, FALSE otherwise. + """ + if IDsOfElements == []: IDsOfElements = self.GetElementsId() MaxNbOfIterations,MaxAspectRatio,Parameters,hasVars = ParseParameters(MaxNbOfIterations,MaxAspectRatio) @@ -3651,33 +4710,45 @@ class Mesh: return self.editor.SmoothParametric(IDsOfElements, IDsOfFixedNodes, MaxNbOfIterations, MaxAspectRatio, Method) - ## Parametrically smooth the elements which belong to the given object - # @param theObject the object to smooth - # @param IDsOfFixedNodes the list of ids of fixed nodes. - # Note that nodes built on edges and boundary nodes are always fixed. - # @param MaxNbOfIterations the maximum number of iterations - # @param MaxAspectRatio varies in range [1.0, inf] - # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH) - # or Centroidal (smesh.CENTROIDAL_SMOOTH) - # @return TRUE in case of success, FALSE otherwise. - # @ingroup l2_modif_smooth def SmoothParametricObject(self, theObject, IDsOfFixedNodes, MaxNbOfIterations, MaxAspectRatio, Method): + """ + Parametrically smooth the elements which belong to the given object + + Parameters: + theObject: the object to smooth + IDsOfFixedNodes: the list of ids of fixed nodes. + Note that nodes built on edges and boundary nodes are always fixed. + MaxNbOfIterations: the maximum number of iterations + MaxAspectRatio: varies in range [1.0, inf] + Method: is either Laplacian (smesh.LAPLACIAN_SMOOTH) + or Centroidal (smesh.CENTROIDAL_SMOOTH) + + Returns: + TRUE in case of success, FALSE otherwise. + """ + if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() return self.editor.SmoothParametricObject(theObject, IDsOfFixedNodes, MaxNbOfIterations, MaxAspectRatio, Method) - ## Convert the mesh to quadratic or bi-quadratic, deletes old elements, replacing - # them with quadratic with the same id. - # @param theForce3d new node creation method: - # 0 - the medium node lies at the geometrical entity from which the mesh element is built - # 1 - the medium node lies at the middle of the line segments connecting two nodes of a mesh element - # @param theSubMesh a group or a sub-mesh to convert; WARNING: in this case the mesh can become not conformal - # @param theToBiQuad If True, converts the mesh to bi-quadratic - # @return SMESH.ComputeError which can hold a warning - # @ingroup l2_modif_tofromqu def ConvertToQuadratic(self, theForce3d=False, theSubMesh=None, theToBiQuad=False): + """ + Convert the mesh to quadratic or bi-quadratic, deletes old elements, replacing + them with quadratic with the same id. + + Parameters: + theForce3d: new node creation method: + 0 - the medium node lies at the geometrical entity from which the mesh element is built + 1 - the medium node lies at the middle of the line segments connecting two nodes of a mesh element + theSubMesh: a group or a sub-mesh to convert; WARNING: in this case the mesh can become not conformal + theToBiQuad: If True, converts the mesh to bi-quadratic + + Returns: + SMESH.ComputeError which can hold a warning + """ + if isinstance( theSubMesh, Mesh ): theSubMesh = theSubMesh.mesh if theToBiQuad: @@ -3691,43 +4762,60 @@ class Mesh: if error and error.comment: print error.comment return error - - ## Convert the mesh from quadratic to ordinary, - # deletes old quadratic elements, \n replacing - # them with ordinary mesh elements with the same id. - # @param theSubMesh a group or a sub-mesh to convert; WARNING: in this case the mesh can become not conformal - # @ingroup l2_modif_tofromqu + def ConvertFromQuadratic(self, theSubMesh=None): + """ + Convert the mesh from quadratic to ordinary, + deletes old quadratic elements, + replacing them with ordinary mesh elements with the same id. + + Parameters: + theSubMesh: a group or a sub-mesh to convert; + + Warning: + in this case the mesh can become not conformal + """ + if theSubMesh: self.editor.ConvertFromQuadraticObject(theSubMesh) else: return self.editor.ConvertFromQuadratic() - ## Create 2D mesh as skin on boundary faces of a 3D mesh - # @return TRUE if operation has been completed successfully, FALSE otherwise - # @ingroup l2_modif_add def Make2DMeshFrom3D(self): + """ + Create 2D mesh as skin on boundary faces of a 3D mesh + + Returns: + TRUE if operation has been completed successfully, FALSE otherwise + """ + return self.editor.Make2DMeshFrom3D() - ## Create missing boundary elements - # @param elements - elements whose boundary is to be checked: - # mesh, group, sub-mesh or list of elements - # if elements is mesh, it must be the mesh whose MakeBoundaryMesh() is called - # @param dimension - defines type of boundary elements to create, either of - # { SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D } - # SMESH.BND_1DFROM3D create mesh edges on all borders of free facets of 3D cells - # @param groupName - a name of group to store created boundary elements in, - # "" means not to create the group - # @param meshName - a name of new mesh to store created boundary elements in, - # "" means not to create the new mesh - # @param toCopyElements - if true, the checked elements will be copied into - # the new mesh else only boundary elements will be copied into the new mesh - # @param toCopyExistingBondary - if true, not only new but also pre-existing - # boundary elements will be copied into the new mesh - # @return tuple (mesh, group) where boundary elements were added to - # @ingroup l2_modif_add def MakeBoundaryMesh(self, elements, dimension=SMESH.BND_2DFROM3D, groupName="", meshName="", toCopyElements=False, toCopyExistingBondary=False): + """ + Create missing boundary elements + + Parameters: + elements: elements whose boundary is to be checked: + mesh, group, sub-mesh or list of elements + if elements is mesh, it must be the mesh whose MakeBoundaryMesh() is called + dimension: defines type of boundary elements to create, either of + { SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D } + SMESH.BND_1DFROM3D create mesh edges on all borders of free facets of 3D cells + groupName: a name of group to store created boundary elements in, + "" means not to create the group + meshName: a name of new mesh to store created boundary elements in, + "" means not to create the new mesh + toCopyElements: if true, the checked elements will be copied into + the new mesh else only boundary elements will be copied into the new mesh + toCopyExistingBondary: if true, not only new but also pre-existing + boundary elements will be copied into the new mesh + + Returns: + tuple (mesh, group) where boundary elements were added to + """ + unRegister = genObjUnRegister() if isinstance( elements, Mesh ): elements = elements.GetMesh() @@ -3741,43 +4829,51 @@ class Mesh: if mesh: mesh = self.smeshpyD.Mesh(mesh) return mesh, group - ## - # @brief Create missing boundary elements around either the whole mesh or - # groups of elements - # @param dimension - defines type of boundary elements to create, either of - # { SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D } - # @param groupName - a name of group to store all boundary elements in, - # "" means not to create the group - # @param meshName - a name of a new mesh, which is a copy of the initial - # mesh + created boundary elements; "" means not to create the new mesh - # @param toCopyAll - if true, the whole initial mesh will be copied into - # the new mesh else only boundary elements will be copied into the new mesh - # @param groups - groups of elements to make boundary around - # @retval tuple( long, mesh, groups ) - # long - number of added boundary elements - # mesh - the mesh where elements were added to - # group - the group of boundary elements or None - # - # @ingroup l2_modif_add def MakeBoundaryElements(self, dimension=SMESH.BND_2DFROM3D, groupName="", meshName="", toCopyAll=False, groups=[]): + """ + **Create** missing boundary elements around either the whole mesh or + groups of elements + + Parameters: + dimension: defines type of boundary elements to create, either of + { SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D } + groupName: a name of group to store all boundary elements in, + "" means not to create the group + meshName: a name of a new mesh, which is a copy of the initial + mesh + created boundary elements; "" means not to create the new mesh + toCopyAll: if true, the whole initial mesh will be copied into + the new mesh else only boundary elements will be copied into the new mesh + groups: groups of elements to make boundary around + + Returns: + tuple( long, mesh, groups ) + long - number of added boundary elements + mesh - the mesh where elements were added to + group - the group of boundary elements or None + """ + nb, mesh, group = self.editor.MakeBoundaryElements(dimension,groupName,meshName, toCopyAll,groups) if mesh: mesh = self.smeshpyD.Mesh(mesh) return nb, mesh, group - ## Renumber mesh nodes (Obsolete, does nothing) - # @ingroup l2_modif_renumber def RenumberNodes(self): + """ + Renumber mesh nodes (Obsolete, does nothing) + """ self.editor.RenumberNodes() - ## Renumber mesh elements (Obsole, does nothing) - # @ingroup l2_modif_renumber def RenumberElements(self): + """ + Renumber mesh elements (Obsole, does nothing) + """ self.editor.RenumberElements() - ## Private method converting \a arg into a list of SMESH_IdSource's def _getIdSourceList(self, arg, idType, unRegister): + """ + Private method converting *arg* into a list of SMESH_IdSource's + """ if arg and isinstance( arg, list ): if isinstance( arg[0], int ): arg = self.GetIDSource( arg, idType ) @@ -3790,22 +4886,28 @@ class Mesh: arg = [arg] return arg - ## Generate new elements by rotation of the given elements and nodes around the axis - # @param nodes - nodes to revolve: a list including ids, groups, sub-meshes or a mesh - # @param edges - edges to revolve: a list including ids, groups, sub-meshes or a mesh - # @param faces - faces to revolve: a list including ids, groups, sub-meshes or a mesh - # @param Axis the axis of rotation: AxisStruct, line (geom object) or [x,y,z,dx,dy,dz] - # @param AngleInRadians the angle of Rotation (in radians) or a name of variable - # which defines angle in degrees - # @param NbOfSteps the number of steps - # @param Tolerance tolerance - # @param MakeGroups forces the generation of new groups from existing ones - # @param TotalAngle gives meaning of AngleInRadians: if True then it is an angular size - # of all steps, else - size of each step - # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev def RotationSweepObjects(self, nodes, edges, faces, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups=False, TotalAngle=False): + """ + Generate new elements by rotation of the given elements and nodes around the axis + + Parameters: + nodes: nodes to revolve: a list including ids, groups, sub-meshes or a mesh + edges: edges to revolve: a list including ids, groups, sub-meshes or a mesh + faces: faces to revolve: a list including ids, groups, sub-meshes or a mesh + Axis: the axis of rotation: AxisStruct, line (geom object) or [x,y,z,dx,dy,dz] + AngleInRadians: the angle of Rotation (in radians) or a name of variable + which defines angle in degrees + NbOfSteps: the number of steps + Tolerance: tolerance + MakeGroups: forces the generation of new groups from existing ones + TotalAngle: gives meaning of AngleInRadians: if True then it is an angular size + of all steps, else - size of each step + + Returns: + the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + unRegister = genObjUnRegister() nodes = self._getIdSourceList( nodes, SMESH.NODE, unRegister ) edges = self._getIdSourceList( edges, SMESH.EDGE, unRegister ) @@ -3826,99 +4928,130 @@ class Mesh: Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups) - ## Generate new elements by rotation of the elements around the axis - # @param IDsOfElements the list of ids of elements to sweep - # @param Axis the axis of rotation, AxisStruct or line(geom object) - # @param AngleInRadians the angle of Rotation (in radians) or a name of variable which defines angle in degrees - # @param NbOfSteps the number of steps - # @param Tolerance tolerance - # @param MakeGroups forces the generation of new groups from existing ones - # @param TotalAngle gives meaning of AngleInRadians: if True then it is an angular size - # of all steps, else - size of each step - # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev def RotationSweep(self, IDsOfElements, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups=False, TotalAngle=False): + """ + Generate new elements by rotation of the elements around the axis + + Parameters: + IDsOfElements: the list of ids of elements to sweep + Axis: the axis of rotation, AxisStruct or line(geom object) + AngleInRadians: the angle of Rotation (in radians) or a name of variable which defines angle in degrees + NbOfSteps: the number of steps + Tolerance: tolerance + MakeGroups: forces the generation of new groups from existing ones + TotalAngle: gives meaning of AngleInRadians: if True then it is an angular size + of all steps, else - size of each step + + Returns: + the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + return self.RotationSweepObjects([], IDsOfElements, IDsOfElements, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups, TotalAngle) - ## Generate new elements by rotation of the elements of object around the axis - # @param theObject object which elements should be sweeped. - # It can be a mesh, a sub mesh or a group. - # @param Axis the axis of rotation, AxisStruct or line(geom object) - # @param AngleInRadians the angle of Rotation - # @param NbOfSteps number of steps - # @param Tolerance tolerance - # @param MakeGroups forces the generation of new groups from existing ones - # @param TotalAngle gives meaning of AngleInRadians: if True then it is an angular size - # of all steps, else - size of each step - # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev def RotationSweepObject(self, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups=False, TotalAngle=False): + """ + Generate new elements by rotation of the elements of object around the axis + theObject object which elements should be sweeped. + It can be a mesh, a sub mesh or a group. + + Parameters: + Axis: the axis of rotation, AxisStruct or line(geom object) + AngleInRadians: the angle of Rotation + NbOfSteps: number of steps + Tolerance: tolerance + MakeGroups: forces the generation of new groups from existing ones + TotalAngle: gives meaning of AngleInRadians: if True then it is an angular size + of all steps, else - size of each step + + Returns: + the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + return self.RotationSweepObjects( [], theObject, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups, TotalAngle ) - ## Generate new elements by rotation of the elements of object around the axis - # @param theObject object which elements should be sweeped. - # It can be a mesh, a sub mesh or a group. - # @param Axis the axis of rotation, AxisStruct or line(geom object) - # @param AngleInRadians the angle of Rotation - # @param NbOfSteps number of steps - # @param Tolerance tolerance - # @param MakeGroups forces the generation of new groups from existing ones - # @param TotalAngle gives meaning of AngleInRadians: if True then it is an angular size - # of all steps, else - size of each step - # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev def RotationSweepObject1D(self, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups=False, TotalAngle=False): + """ + Generate new elements by rotation of the elements of object around the axis + theObject object which elements should be sweeped. + It can be a mesh, a sub mesh or a group. + + Parameters: + Axis: the axis of rotation, AxisStruct or line(geom object) + AngleInRadians: the angle of Rotation + NbOfSteps: number of steps + Tolerance: tolerance + MakeGroups: forces the generation of new groups from existing ones + TotalAngle: gives meaning of AngleInRadians: if True then it is an angular size + of all steps, else - size of each step + + Returns: + the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + return self.RotationSweepObjects([],theObject,[], Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups, TotalAngle) - ## Generate new elements by rotation of the elements of object around the axis - # @param theObject object which elements should be sweeped. - # It can be a mesh, a sub mesh or a group. - # @param Axis the axis of rotation, AxisStruct or line(geom object) - # @param AngleInRadians the angle of Rotation - # @param NbOfSteps number of steps - # @param Tolerance tolerance - # @param MakeGroups forces the generation of new groups from existing ones - # @param TotalAngle gives meaning of AngleInRadians: if True then it is an angular size - # of all steps, else - size of each step - # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev def RotationSweepObject2D(self, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups=False, TotalAngle=False): + """ + Generate new elements by rotation of the elements of object around the axis + theObject object which elements should be sweeped. + It can be a mesh, a sub mesh or a group. + + Parameters: + Axis: the axis of rotation, AxisStruct or line(geom object) + AngleInRadians: the angle of Rotation + NbOfSteps: number of steps + Tolerance: tolerance + MakeGroups: forces the generation of new groups from existing ones + TotalAngle: gives meaning of AngleInRadians: if True then it is an angular size + of all steps, else - size of each step + + Returns: + the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + return self.RotationSweepObjects([],[],theObject, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups, TotalAngle) - ## Generate new elements by extrusion of the given elements and nodes - # @param nodes nodes to extrude: a list including ids, groups, sub-meshes or a mesh - # @param edges edges to extrude: a list including ids, groups, sub-meshes or a mesh - # @param faces faces to extrude: a list including ids, groups, sub-meshes or a mesh - # @param StepVector vector or DirStruct or 3 vector components, defining - # the direction and value of extrusion for one step (the total extrusion - # length will be NbOfSteps * ||StepVector||) - # @param NbOfSteps the number of steps - # @param MakeGroups forces the generation of new groups from existing ones - # @param scaleFactors optional scale factors to apply during extrusion - # @param linearVariation if @c True, scaleFactors are spread over all @a scaleFactors, - # else scaleFactors[i] is applied to nodes at the i-th extrusion step - # @param basePoint optional scaling center; if not provided, a gravity center of - # nodes and elements being extruded is used as the scaling center. - # It can be either - # - a list of tree components of the point or - # - a node ID or - # - a GEOM point - # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion example def ExtrusionSweepObjects(self, nodes, edges, faces, StepVector, NbOfSteps, MakeGroups=False, scaleFactors=[], linearVariation=False, basePoint=[] ): + """ + Generate new elements by extrusion of the given elements and nodes + + Parameters: + nodes: nodes to extrude: a list including ids, groups, sub-meshes or a mesh + edges: edges to extrude: a list including ids, groups, sub-meshes or a mesh + faces: faces to extrude: a list including ids, groups, sub-meshes or a mesh + StepVector: vector or DirStruct or 3 vector components, defining + the direction and value of extrusion for one step (the total extrusion + length will be NbOfSteps * ||StepVector||) + NbOfSteps: the number of steps + MakeGroups: forces the generation of new groups from existing ones + scaleFactors: optional scale factors to apply during extrusion + linearVariation: if *True*, scaleFactors are spread over all @a scaleFactors, + else scaleFactors[i] is applied to nodes at the i-th extrusion step + basePoint: optional scaling center; if not provided, a gravity center of + nodes and elements being extruded is used as the scaling center. + It can be either + + - a list of tree components of the point or + - a node ID or + - a GEOM point + + Returns: + the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + + :ref:`tui_extrusion` example + """ unRegister = genObjUnRegister() nodes = self._getIdSourceList( nodes, SMESH.NODE, unRegister ) edges = self._getIdSourceList( edges, SMESH.EDGE, unRegister ) @@ -3947,46 +5080,58 @@ class Mesh: MakeGroups) - ## Generate new elements by extrusion of the elements with given ids - # @param IDsOfElements the list of ids of elements or nodes for extrusion - # @param StepVector vector or DirStruct or 3 vector components, defining - # the direction and value of extrusion for one step (the total extrusion - # length will be NbOfSteps * ||StepVector||) - # @param NbOfSteps the number of steps - # @param MakeGroups forces the generation of new groups from existing ones - # @param IsNodes is True if elements with given ids are nodes - # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion example def ExtrusionSweep(self, IDsOfElements, StepVector, NbOfSteps, MakeGroups=False, IsNodes = False): + """ + Generate new elements by extrusion of the elements with given ids + + Parameters: + IDsOfElements: the list of ids of elements or nodes for extrusion + StepVector: vector or DirStruct or 3 vector components, defining + the direction and value of extrusion for one step (the total extrusion + length will be NbOfSteps * ||StepVector||) + NbOfSteps: the number of steps + MakeGroups: forces the generation of new groups from existing ones + IsNodes: is True if elements with given ids are nodes + + Returns: + the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + + :ref:`tui_extrusion` example + """ n,e,f = [],[],[] if IsNodes: n = IDsOfElements else : e,f, = IDsOfElements,IDsOfElements return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups) - ## Generate new elements by extrusion along the normal to a discretized surface or wire - # @param Elements elements to extrude - a list including ids, groups, sub-meshes or a mesh. - # Only faces can be extruded so far. A sub-mesh should be a sub-mesh on geom faces. - # @param StepSize length of one extrusion step (the total extrusion - # length will be \a NbOfSteps * \a StepSize ). - # @param NbOfSteps number of extrusion steps. - # @param ByAverageNormal if True each node is translated by \a StepSize - # along the average of the normal vectors to the faces sharing the node; - # else each node is translated along the same average normal till - # intersection with the plane got by translation of the face sharing - # the node along its own normal by \a StepSize. - # @param UseInputElemsOnly to use only \a Elements when computing extrusion direction - # for every node of \a Elements. - # @param MakeGroups forces generation of new groups from existing ones. - # @param Dim dimension of elements to extrude: 2 - faces or 1 - edges. Extrusion of edges - # is not yet implemented. This parameter is used if \a Elements contains - # both faces and edges, i.e. \a Elements is a Mesh. - # @return the list of created groups (SMESH_GroupBase) if \a MakeGroups=True, - # empty list otherwise. - # @ingroup l2_modif_extrurev - # @ref tui_extrusion example def ExtrusionByNormal(self, Elements, StepSize, NbOfSteps, ByAverageNormal=False, UseInputElemsOnly=True, MakeGroups=False, Dim = 2): + """ + Generate new elements by extrusion along the normal to a discretized surface or wire + + Parameters: + Elements: elements to extrude - a list including ids, groups, sub-meshes or a mesh. + Only faces can be extruded so far. A sub-mesh should be a sub-mesh on geom faces. + StepSize: length of one extrusion step (the total extrusion + length will be *NbOfSteps* *StepSize*). + NbOfSteps: number of extrusion steps. + ByAverageNormal: if True each node is translated by *StepSize* + along the average of the normal vectors to the faces sharing the node; + else each node is translated along the same average normal till + intersection with the plane got by translation of the face sharing + the node along its own normal by *StepSize*. + UseInputElemsOnly: to use only *Elements* when computing extrusion direction + for every node of *Elements*. + MakeGroups: forces generation of new groups from existing ones. + Dim: dimension of elements to extrude: 2 - faces or 1 - edges. Extrusion of edges + is not yet implemented. This parameter is used if *Elements* contains + both faces and edges, i.e. *Elements* is a Mesh. + + Returns: + the list of created groups (SMESH_GroupBase) if *MakeGroups=True*, + empty list otherwise. + :ref:`tui_extrusion` example + """ + unRegister = genObjUnRegister() if isinstance( Elements, Mesh ): Elements = [ Elements.GetMesh() ] @@ -4003,66 +5148,90 @@ class Mesh: return self.editor.ExtrusionByNormal(Elements, StepSize, NbOfSteps, ByAverageNormal, UseInputElemsOnly, MakeGroups, Dim) - ## Generate new elements by extrusion of the elements or nodes which belong to the object - # @param theObject the object whose elements or nodes should be processed. - # It can be a mesh, a sub-mesh or a group. - # @param StepVector vector or DirStruct or 3 vector components, defining - # the direction and value of extrusion for one step (the total extrusion - # length will be NbOfSteps * ||StepVector||) - # @param NbOfSteps the number of steps - # @param MakeGroups forces the generation of new groups from existing ones - # @param IsNodes is True if elements to extrude are nodes - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion example def ExtrusionSweepObject(self, theObject, StepVector, NbOfSteps, MakeGroups=False, IsNodes=False): + """ + Generate new elements by extrusion of the elements or nodes which belong to the object + + Parameters: + theObject: the object whose elements or nodes should be processed. + It can be a mesh, a sub-mesh or a group. + StepVector: vector or DirStruct or 3 vector components, defining + the direction and value of extrusion for one step (the total extrusion + length will be NbOfSteps * ||StepVector||) + NbOfSteps: the number of steps + MakeGroups: forces the generation of new groups from existing ones + IsNodes: is True if elements to extrude are nodes + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + :ref:`tui_extrusion` example + """ + n,e,f = [],[],[] if IsNodes: n = theObject else : e,f, = theObject,theObject return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups) - ## Generate new elements by extrusion of edges which belong to the object - # @param theObject object whose 1D elements should be processed. - # It can be a mesh, a sub-mesh or a group. - # @param StepVector vector or DirStruct or 3 vector components, defining - # the direction and value of extrusion for one step (the total extrusion - # length will be NbOfSteps * ||StepVector||) - # @param NbOfSteps the number of steps - # @param MakeGroups to generate new groups from existing ones - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion example def ExtrusionSweepObject1D(self, theObject, StepVector, NbOfSteps, MakeGroups=False): + """ + Generate new elements by extrusion of edges which belong to the object + + Parameters: + theObject: object whose 1D elements should be processed. + It can be a mesh, a sub-mesh or a group. + StepVector: vector or DirStruct or 3 vector components, defining + the direction and value of extrusion for one step (the total extrusion + length will be NbOfSteps * ||StepVector||) + NbOfSteps: the number of steps + MakeGroups: to generate new groups from existing ones + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + :ref:`tui_extrusion` example + """ + return self.ExtrusionSweepObjects([],theObject,[], StepVector, NbOfSteps, MakeGroups) - ## Generate new elements by extrusion of faces which belong to the object - # @param theObject object whose 2D elements should be processed. - # It can be a mesh, a sub-mesh or a group. - # @param StepVector vector or DirStruct or 3 vector components, defining - # the direction and value of extrusion for one step (the total extrusion - # length will be NbOfSteps * ||StepVector||) - # @param NbOfSteps the number of steps - # @param MakeGroups forces the generation of new groups from existing ones - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion example def ExtrusionSweepObject2D(self, theObject, StepVector, NbOfSteps, MakeGroups=False): + """ + Generate new elements by extrusion of faces which belong to the object + + Parameters: + theObject: object whose 2D elements should be processed. + It can be a mesh, a sub-mesh or a group. + StepVector: vector or DirStruct or 3 vector components, defining + the direction and value of extrusion for one step (the total extrusion + length will be NbOfSteps * ||StepVector||) + NbOfSteps: the number of steps + MakeGroups: forces the generation of new groups from existing ones + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + :ref:`tui_extrusion` example + """ + return self.ExtrusionSweepObjects([],[],theObject, StepVector, NbOfSteps, MakeGroups) - ## Generate new elements by extrusion of the elements with given ids - # @param IDsOfElements is ids of elements - # @param StepVector vector or DirStruct or 3 vector components, defining - # the direction and value of extrusion for one step (the total extrusion - # length will be NbOfSteps * ||StepVector||) - # @param NbOfSteps the number of steps - # @param ExtrFlags sets flags for extrusion - # @param SewTolerance uses for comparing locations of nodes if flag - # EXTRUSION_FLAG_SEW is set - # @param MakeGroups forces the generation of new groups from existing ones - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_extrurev def AdvancedExtrusion(self, IDsOfElements, StepVector, NbOfSteps, ExtrFlags, SewTolerance, MakeGroups=False): + """ + Generate new elements by extrusion of the elements with given ids + + Parameters: + IDsOfElements: is ids of elements + StepVector: vector or DirStruct or 3 vector components, defining + the direction and value of extrusion for one step (the total extrusion + length will be NbOfSteps * ||StepVector||) + NbOfSteps: the number of steps + ExtrFlags: sets flags for extrusion + SewTolerance: uses for comparing locations of nodes if flag + EXTRUSION_FLAG_SEW is set + MakeGroups: forces the generation of new groups from existing ones + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + if isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object): StepVector = self.smeshpyD.GetDirStruct(StepVector) if isinstance( StepVector, list ): @@ -4070,30 +5239,36 @@ class Mesh: return self.editor.AdvancedExtrusion(IDsOfElements, StepVector, NbOfSteps, ExtrFlags, SewTolerance, MakeGroups) - ## Generate new elements by extrusion of the given elements and nodes along the path. - # The path of extrusion must be a meshed edge. - # @param Nodes nodes to extrude: a list including ids, groups, sub-meshes or a mesh - # @param Edges edges to extrude: a list including ids, groups, sub-meshes or a mesh - # @param Faces faces to extrude: a list including ids, groups, sub-meshes or a mesh - # @param PathMesh 1D mesh or 1D sub-mesh, along which proceeds the extrusion - # @param PathShape shape (edge) defines the sub-mesh of PathMesh if PathMesh - # contains not only path segments, else it can be None - # @param NodeStart the first or the last node on the path. Defines the direction of extrusion - # @param HasAngles allows the shape to be rotated around the path - # to get the resulting mesh in a helical fashion - # @param Angles list of angles - # @param LinearVariation forces the computation of rotation angles as linear - # variation of the given Angles along path steps - # @param HasRefPoint allows using the reference point - # @param RefPoint the point around which the shape is rotated (the mass center of the - # shape by default). The User can specify any point as the Reference Point. - # @param MakeGroups forces the generation of new groups from existing ones - # @return list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error - # @ingroup l2_modif_extrurev - # @ref tui_extrusion_along_path example def ExtrusionAlongPathObjects(self, Nodes, Edges, Faces, PathMesh, PathShape=None, NodeStart=1, HasAngles=False, Angles=[], LinearVariation=False, HasRefPoint=False, RefPoint=[0,0,0], MakeGroups=False): + """ + Generate new elements by extrusion of the given elements and nodes along the path. + The path of extrusion must be a meshed edge. + + Parameters: + Nodes: nodes to extrude: a list including ids, groups, sub-meshes or a mesh + Edges: edges to extrude: a list including ids, groups, sub-meshes or a mesh + Faces: faces to extrude: a list including ids, groups, sub-meshes or a mesh + PathMesh: 1D mesh or 1D sub-mesh, along which proceeds the extrusion + PathShape: shape (edge) defines the sub-mesh of PathMesh if PathMesh + contains not only path segments, else it can be None + NodeStart: the first or the last node on the path. Defines the direction of extrusion + HasAngles: allows the shape to be rotated around the path + to get the resulting mesh in a helical fashion + Angles: list of angles + LinearVariation: forces the computation of rotation angles as linear + variation of the given Angles along path steps + HasRefPoint: allows using the reference point + RefPoint: the point around which the shape is rotated (the mass center of the + shape by default). The User can specify any point as the Reference Point. + MakeGroups: forces the generation of new groups from existing ones + + Returns: + list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error + :ref:`tui_extrusion_along_path` example + """ + unRegister = genObjUnRegister() Nodes = self._getIdSourceList( Nodes, SMESH.NODE, unRegister ) Edges = self._getIdSourceList( Edges, SMESH.EDGE, unRegister ) @@ -4114,31 +5289,37 @@ class Mesh: HasAngles, Angles, LinearVariation, HasRefPoint, RefPoint, MakeGroups) - ## Generate new elements by extrusion of the given elements - # The path of extrusion must be a meshed edge. - # @param Base mesh or group, or sub-mesh, or list of ids of elements for extrusion - # @param Path - 1D mesh or 1D sub-mesh, along which proceeds the extrusion - # @param NodeStart the start node from Path. Defines the direction of extrusion - # @param HasAngles allows the shape to be rotated around the path - # to get the resulting mesh in a helical fashion - # @param Angles list of angles in radians - # @param LinearVariation forces the computation of rotation angles as linear - # variation of the given Angles along path steps - # @param HasRefPoint allows using the reference point - # @param RefPoint the point around which the elements are rotated (the mass - # center of the elements by default). - # The User can specify any point as the Reference Point. - # RefPoint can be either GEOM Vertex, [x,y,z] or SMESH.PointStruct - # @param MakeGroups forces the generation of new groups from existing ones - # @param ElemType type of elements for extrusion (if param Base is a mesh) - # @return list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, - # only SMESH::Extrusion_Error otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion_along_path example def ExtrusionAlongPathX(self, Base, Path, NodeStart, HasAngles=False, Angles=[], LinearVariation=False, HasRefPoint=False, RefPoint=[0,0,0], MakeGroups=False, ElemType=SMESH.FACE): + """ + Generate new elements by extrusion of the given elements + The path of extrusion must be a meshed edge. + + Parameters: + Base: mesh or group, or sub-mesh, or list of ids of elements for extrusion + Path: 1D mesh or 1D sub-mesh, along which proceeds the extrusion + NodeStart: the start node from Path. Defines the direction of extrusion + HasAngles: allows the shape to be rotated around the path + to get the resulting mesh in a helical fashion + Angles: list of angles in radians + LinearVariation: forces the computation of rotation angles as linear + variation of the given Angles along path steps + HasRefPoint: allows using the reference point + RefPoint: the point around which the elements are rotated (the mass + center of the elements by default). + The User can specify any point as the Reference Point. + RefPoint can be either GEOM Vertex, [x,y,z] or SMESH.PointStruct + MakeGroups: forces the generation of new groups from existing ones + ElemType: type of elements for extrusion (if param Base is a mesh) + + Returns: + list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, + only SMESH::Extrusion_Error otherwise + :ref:`tui_extrusion_along_path` example + """ + n,e,f = [],[],[] if ElemType == SMESH.NODE: n = Base if ElemType == SMESH.EDGE: e = Base @@ -4149,28 +5330,34 @@ class Mesh: if MakeGroups: return gr,er return er - ## Generate new elements by extrusion of the given elements - # The path of extrusion must be a meshed edge. - # @param IDsOfElements ids of elements - # @param PathMesh mesh containing a 1D sub-mesh on the edge, along which proceeds the extrusion - # @param PathShape shape(edge) defines the sub-mesh for the path - # @param NodeStart the first or the last node on the edge. Defines the direction of extrusion - # @param HasAngles allows the shape to be rotated around the path - # to get the resulting mesh in a helical fashion - # @param Angles list of angles in radians - # @param HasRefPoint allows using the reference point - # @param RefPoint the point around which the shape is rotated (the mass center of the shape by default). - # The User can specify any point as the Reference Point. - # @param MakeGroups forces the generation of new groups from existing ones - # @param LinearVariation forces the computation of rotation angles as linear - # variation of the given Angles along path steps - # @return list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, - # only SMESH::Extrusion_Error otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion_along_path example def ExtrusionAlongPath(self, IDsOfElements, PathMesh, PathShape, NodeStart, HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[], MakeGroups=False, LinearVariation=False): + """ + Generate new elements by extrusion of the given elements + The path of extrusion must be a meshed edge. + + Parameters: + IDsOfElements: ids of elements + PathMesh: mesh containing a 1D sub-mesh on the edge, along which proceeds the extrusion + PathShape: shape(edge) defines the sub-mesh for the path + NodeStart: the first or the last node on the edge. Defines the direction of extrusion + HasAngles: allows the shape to be rotated around the path + to get the resulting mesh in a helical fashion + Angles: list of angles in radians + HasRefPoint: allows using the reference point + RefPoint: the point around which the shape is rotated (the mass center of the shape by default). + The User can specify any point as the Reference Point. + MakeGroups: forces the generation of new groups from existing ones + LinearVariation: forces the computation of rotation angles as linear + variation of the given Angles along path steps + + Returns: + list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, + only SMESH::Extrusion_Error otherwise + :ref:`tui_extrusion_along_path` example + """ + n,e,f = [],IDsOfElements,IDsOfElements gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart, HasAngles, Angles, @@ -4179,29 +5366,35 @@ class Mesh: if MakeGroups: return gr,er return er - ## Generate new elements by extrusion of the elements which belong to the object - # The path of extrusion must be a meshed edge. - # @param theObject the object whose elements should be processed. - # It can be a mesh, a sub-mesh or a group. - # @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds - # @param PathShape shape(edge) defines the sub-mesh for the path - # @param NodeStart the first or the last node on the edge. Defines the direction of extrusion - # @param HasAngles allows the shape to be rotated around the path - # to get the resulting mesh in a helical fashion - # @param Angles list of angles - # @param HasRefPoint allows using the reference point - # @param RefPoint the point around which the shape is rotated (the mass center of the shape by default). - # The User can specify any point as the Reference Point. - # @param MakeGroups forces the generation of new groups from existing ones - # @param LinearVariation forces the computation of rotation angles as linear - # variation of the given Angles along path steps - # @return list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, - # only SMESH::Extrusion_Error otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion_along_path example def ExtrusionAlongPathObject(self, theObject, PathMesh, PathShape, NodeStart, HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[], MakeGroups=False, LinearVariation=False): + """ + Generate new elements by extrusion of the elements which belong to the object + The path of extrusion must be a meshed edge. + + Parameters: + theObject: the object whose elements should be processed. + It can be a mesh, a sub-mesh or a group. + PathMesh: mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds + PathShape: shape(edge) defines the sub-mesh for the path + NodeStart: the first or the last node on the edge. Defines the direction of extrusion + HasAngles: allows the shape to be rotated around the path + to get the resulting mesh in a helical fashion + Angles: list of angles + HasRefPoint: allows using the reference point + RefPoint: the point around which the shape is rotated (the mass center of the shape by default). + The User can specify any point as the Reference Point. + MakeGroups: forces the generation of new groups from existing ones + LinearVariation: forces the computation of rotation angles as linear + variation of the given Angles along path steps + + Returns: + list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, + only SMESH::Extrusion_Error otherwise + :ref:`tui_extrusion_along_path` example + """ + n,e,f = [],theObject,theObject gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart, HasAngles, Angles, LinearVariation, @@ -4209,29 +5402,35 @@ class Mesh: if MakeGroups: return gr,er return er - ## Generate new elements by extrusion of mesh segments which belong to the object - # The path of extrusion must be a meshed edge. - # @param theObject the object whose 1D elements should be processed. - # It can be a mesh, a sub-mesh or a group. - # @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds - # @param PathShape shape(edge) defines the sub-mesh for the path - # @param NodeStart the first or the last node on the edge. Defines the direction of extrusion - # @param HasAngles allows the shape to be rotated around the path - # to get the resulting mesh in a helical fashion - # @param Angles list of angles - # @param HasRefPoint allows using the reference point - # @param RefPoint the point around which the shape is rotated (the mass center of the shape by default). - # The User can specify any point as the Reference Point. - # @param MakeGroups forces the generation of new groups from existing ones - # @param LinearVariation forces the computation of rotation angles as linear - # variation of the given Angles along path steps - # @return list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, - # only SMESH::Extrusion_Error otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion_along_path example def ExtrusionAlongPathObject1D(self, theObject, PathMesh, PathShape, NodeStart, HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[], MakeGroups=False, LinearVariation=False): + """ + Generate new elements by extrusion of mesh segments which belong to the object + The path of extrusion must be a meshed edge. + + Parameters: + theObject: the object whose 1D elements should be processed. + It can be a mesh, a sub-mesh or a group. + PathMesh: mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds + PathShape: shape(edge) defines the sub-mesh for the path + NodeStart: the first or the last node on the edge. Defines the direction of extrusion + HasAngles: allows the shape to be rotated around the path + to get the resulting mesh in a helical fashion + Angles: list of angles + HasRefPoint: allows using the reference point + RefPoint the point: around which the shape is rotated (the mass center of the shape by default). + The User can specify any point as the Reference Point. + MakeGroups: forces the generation of new groups from existing ones + LinearVariation: forces the computation of rotation angles as linear + variation of the given Angles along path steps + + Returns: + list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, + only SMESH::Extrusion_Error otherwise + :ref:`tui_extrusion_along_path` example + """ + n,e,f = [],theObject,[] gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart, HasAngles, Angles, LinearVariation, @@ -4239,29 +5438,35 @@ class Mesh: if MakeGroups: return gr,er return er - ## Generate new elements by extrusion of faces which belong to the object - # The path of extrusion must be a meshed edge. - # @param theObject the object whose 2D elements should be processed. - # It can be a mesh, a sub-mesh or a group. - # @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds - # @param PathShape shape(edge) defines the sub-mesh for the path - # @param NodeStart the first or the last node on the edge. Defines the direction of extrusion - # @param HasAngles allows the shape to be rotated around the path - # to get the resulting mesh in a helical fashion - # @param Angles list of angles - # @param HasRefPoint allows using the reference point - # @param RefPoint the point around which the shape is rotated (the mass center of the shape by default). - # The User can specify any point as the Reference Point. - # @param MakeGroups forces the generation of new groups from existing ones - # @param LinearVariation forces the computation of rotation angles as linear - # variation of the given Angles along path steps - # @return list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, - # only SMESH::Extrusion_Error otherwise - # @ingroup l2_modif_extrurev - # @ref tui_extrusion_along_path example def ExtrusionAlongPathObject2D(self, theObject, PathMesh, PathShape, NodeStart, HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[], MakeGroups=False, LinearVariation=False): + """ + Generate new elements by extrusion of faces which belong to the object + The path of extrusion must be a meshed edge. + + Parameters: + theObject: the object whose 2D elements should be processed. + It can be a mesh, a sub-mesh or a group. + PathMesh: mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds + PathShape: shape(edge) defines the sub-mesh for the path + NodeStart: the first or the last node on the edge. Defines the direction of extrusion + HasAngles: allows the shape to be rotated around the path + to get the resulting mesh in a helical fashion + Angles: list of angles + HasRefPoint: allows using the reference point + RefPoint: the point around which the shape is rotated (the mass center of the shape by default). + The User can specify any point as the Reference Point. + MakeGroups: forces the generation of new groups from existing ones + LinearVariation: forces the computation of rotation angles as linear + variation of the given Angles along path steps + + Returns: + list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True, + only SMESH::Extrusion_Error otherwise + :ref:`tui_extrusion_along_path` example + """ + n,e,f = [],[],theObject gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart, HasAngles, Angles, LinearVariation, @@ -4269,16 +5474,22 @@ class Mesh: if MakeGroups: return gr,er return er - ## Create a symmetrical copy of mesh elements - # @param IDsOfElements list of elements ids - # @param Mirror is AxisStruct or geom object(point, line, plane) - # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE - # If the Mirror is a geom object this parameter is unnecessary - # @param Copy allows to copy element (Copy is 1) or to replace with its mirroring (Copy is 0) - # @param MakeGroups forces the generation of new groups from existing ones (if Copy) - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_trsf def Mirror(self, IDsOfElements, Mirror, theMirrorType=None, Copy=0, MakeGroups=False): + """ + Create a symmetrical copy of mesh elements + + Parameters: + IDsOfElements: list of elements ids + Mirror: is AxisStruct or geom object(point, line, plane) + theMirrorType: smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE + If the Mirror is a geom object this parameter is unnecessary + Copy: allows to copy element (Copy is 1) or to replace with its mirroring (Copy is 0) + MakeGroups: forces the generation of new groups from existing ones (if Copy) + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + if IDsOfElements == []: IDsOfElements = self.GetElementsId() if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4291,16 +5502,22 @@ class Mesh: self.editor.Mirror(IDsOfElements, Mirror, theMirrorType, Copy) return [] - ## Create a new mesh by a symmetrical copy of mesh elements - # @param IDsOfElements the list of elements ids - # @param Mirror is AxisStruct or geom object (point, line, plane) - # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE - # If the Mirror is a geom object this parameter is unnecessary - # @param MakeGroups to generate new groups from existing ones - # @param NewMeshName a name of the new mesh to create - # @return instance of Mesh class - # @ingroup l2_modif_trsf def MirrorMakeMesh(self, IDsOfElements, Mirror, theMirrorType=0, MakeGroups=0, NewMeshName=""): + """ + Create a new mesh by a symmetrical copy of mesh elements + + Parameters: + IDsOfElements: the list of elements ids + Mirror: is AxisStruct or geom object (point, line, plane) + theMirrorType: smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE + If the Mirror is a geom object this parameter is unnecessary + MakeGroups: to generate new groups from existing ones + NewMeshName: a name of the new mesh to create + + Returns: + instance of Mesh class + """ + if IDsOfElements == []: IDsOfElements = self.GetElementsId() if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4312,16 +5529,22 @@ class Mesh: MakeGroups, NewMeshName) return Mesh(self.smeshpyD,self.geompyD,mesh) - ## Create a symmetrical copy of the object - # @param theObject mesh, submesh or group - # @param Mirror AxisStruct or geom object (point, line, plane) - # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE - # If the Mirror is a geom object this parameter is unnecessary - # @param Copy allows copying the element (Copy is 1) or replacing it with its mirror (Copy is 0) - # @param MakeGroups forces the generation of new groups from existing ones (if Copy) - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_trsf def MirrorObject (self, theObject, Mirror, theMirrorType=None, Copy=0, MakeGroups=False): + """ + Create a symmetrical copy of the object + + Parameters: + theObject: mesh, submesh or group + Mirror: AxisStruct or geom object (point, line, plane) + theMirrorType: smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE + If the Mirror is a geom object this parameter is unnecessary + Copy: allows copying the element (Copy is 1) or replacing it with its mirror (Copy is 0) + MakeGroups: forces the generation of new groups from existing ones (if Copy) + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4334,16 +5557,22 @@ class Mesh: self.editor.MirrorObject(theObject, Mirror, theMirrorType, Copy) return [] - ## Create a new mesh by a symmetrical copy of the object - # @param theObject mesh, submesh or group - # @param Mirror AxisStruct or geom object (point, line, plane) - # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE - # If the Mirror is a geom object this parameter is unnecessary - # @param MakeGroups forces the generation of new groups from existing ones - # @param NewMeshName the name of the new mesh to create - # @return instance of Mesh class - # @ingroup l2_modif_trsf def MirrorObjectMakeMesh (self, theObject, Mirror, theMirrorType=0,MakeGroups=0,NewMeshName=""): + """ + Create a new mesh by a symmetrical copy of the object + + Parameters: + theObject: mesh, submesh or group + Mirror: AxisStruct or geom object (point, line, plane) + theMirrorType: smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE + If the Mirror is a geom object this parameter is unnecessary + MakeGroups: forces the generation of new groups from existing ones + NewMeshName: the name of the new mesh to create + + Returns: + instance of Mesh class + """ + if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4355,14 +5584,20 @@ class Mesh: MakeGroups, NewMeshName) return Mesh( self.smeshpyD,self.geompyD,mesh ) - ## Translate the elements - # @param IDsOfElements list of elements ids - # @param Vector the direction of translation (DirStruct or vector or 3 vector components) - # @param Copy allows copying the translated elements - # @param MakeGroups forces the generation of new groups from existing ones (if Copy) - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_trsf def Translate(self, IDsOfElements, Vector, Copy, MakeGroups=False): + """ + Translate the elements + + Parameters: + IDsOfElements: list of elements ids + Vector: the direction of translation (DirStruct or vector or 3 vector components) + Copy: allows copying the translated elements + MakeGroups: forces the generation of new groups from existing ones (if Copy) + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + if IDsOfElements == []: IDsOfElements = self.GetElementsId() if ( isinstance( Vector, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4375,14 +5610,20 @@ class Mesh: self.editor.Translate(IDsOfElements, Vector, Copy) return [] - ## Create a new mesh of translated elements - # @param IDsOfElements list of elements ids - # @param Vector the direction of translation (DirStruct or vector or 3 vector components) - # @param MakeGroups forces the generation of new groups from existing ones - # @param NewMeshName the name of the newly created mesh - # @return instance of Mesh class - # @ingroup l2_modif_trsf def TranslateMakeMesh(self, IDsOfElements, Vector, MakeGroups=False, NewMeshName=""): + """ + Create a new mesh of translated elements + + Parameters: + IDsOfElements: list of elements ids + Vector: the direction of translation (DirStruct or vector or 3 vector components) + MakeGroups: forces the generation of new groups from existing ones + NewMeshName: the name of the newly created mesh + + Returns: + instance of Mesh class + """ + if IDsOfElements == []: IDsOfElements = self.GetElementsId() if ( isinstance( Vector, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4393,14 +5634,20 @@ class Mesh: mesh = self.editor.TranslateMakeMesh(IDsOfElements, Vector, MakeGroups, NewMeshName) return Mesh ( self.smeshpyD, self.geompyD, mesh ) - ## Translate the object - # @param theObject the object to translate (mesh, submesh, or group) - # @param Vector direction of translation (DirStruct or geom vector or 3 vector components) - # @param Copy allows copying the translated elements - # @param MakeGroups forces the generation of new groups from existing ones (if Copy) - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_trsf def TranslateObject(self, theObject, Vector, Copy, MakeGroups=False): + """ + Translate the object + + Parameters: + theObject: the object to translate (mesh, submesh, or group) + Vector: direction of translation (DirStruct or geom vector or 3 vector components) + Copy: allows copying the translated elements + MakeGroups: forces the generation of new groups from existing ones (if Copy) + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() if ( isinstance( Vector, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4413,14 +5660,20 @@ class Mesh: self.editor.TranslateObject(theObject, Vector, Copy) return [] - ## Create a new mesh from the translated object - # @param theObject the object to translate (mesh, submesh, or group) - # @param Vector the direction of translation (DirStruct or geom vector or 3 vector components) - # @param MakeGroups forces the generation of new groups from existing ones - # @param NewMeshName the name of the newly created mesh - # @return instance of Mesh class - # @ingroup l2_modif_trsf def TranslateObjectMakeMesh(self, theObject, Vector, MakeGroups=False, NewMeshName=""): + """ + Create a new mesh from the translated object + + Parameters: + theObject: the object to translate (mesh, submesh, or group) + Vector: the direction of translation (DirStruct or geom vector or 3 vector components) + MakeGroups: forces the generation of new groups from existing ones + NewMeshName: the name of the newly created mesh + + Returns: + instance of Mesh class + """ + if isinstance( theObject, Mesh ): theObject = theObject.GetMesh() if isinstance( Vector, geomBuilder.GEOM._objref_GEOM_Object ): @@ -4433,16 +5686,22 @@ class Mesh: - ## Scale the object - # @param theObject - the object to translate (mesh, submesh, or group) - # @param thePoint - base point for scale (SMESH.PointStruct or list of 3 coordinates) - # @param theScaleFact - list of 1-3 scale factors for axises - # @param Copy - allows copying the translated elements - # @param MakeGroups - forces the generation of new groups from existing - # ones (if Copy) - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, - # empty list otherwise def Scale(self, theObject, thePoint, theScaleFact, Copy, MakeGroups=False): + """ + Scale the object + + Parameters: + theObject: the object to translate (mesh, submesh, or group) + thePoint: base point for scale (SMESH.PointStruct or list of 3 coordinates) + theScaleFact: list of 1-3 scale factors for axises + Copy: allows copying the translated elements + MakeGroups: forces the generation of new groups from existing + ones (if Copy) + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, + empty list otherwise + """ unRegister = genObjUnRegister() if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() @@ -4463,14 +5722,20 @@ class Mesh: self.editor.Scale(theObject, thePoint, theScaleFact, Copy) return [] - ## Create a new mesh from the translated object - # @param theObject - the object to translate (mesh, submesh, or group) - # @param thePoint - base point for scale (SMESH.PointStruct or list of 3 coordinates) - # @param theScaleFact - list of 1-3 scale factors for axises - # @param MakeGroups - forces the generation of new groups from existing ones - # @param NewMeshName - the name of the newly created mesh - # @return instance of Mesh class def ScaleMakeMesh(self, theObject, thePoint, theScaleFact, MakeGroups=False, NewMeshName=""): + """ + Create a new mesh from the translated object + + Parameters: + theObject: the object to translate (mesh, submesh, or group) + thePoint: base point for scale (SMESH.PointStruct or list of 3 coordinates) + theScaleFact: list of 1-3 scale factors for axises + MakeGroups: forces the generation of new groups from existing ones + NewMeshName: the name of the newly created mesh + + Returns: + instance of Mesh class + """ unRegister = genObjUnRegister() if (isinstance(theObject, Mesh)): theObject = theObject.GetMesh() @@ -4491,15 +5756,22 @@ class Mesh: - ## Rotate the elements - # @param IDsOfElements list of elements ids - # @param Axis the axis of rotation (AxisStruct or geom line) - # @param AngleInRadians the angle of rotation (in radians) or a name of variable which defines angle in degrees - # @param Copy allows copying the rotated elements - # @param MakeGroups forces the generation of new groups from existing ones (if Copy) - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_trsf def Rotate (self, IDsOfElements, Axis, AngleInRadians, Copy, MakeGroups=False): + """ + Rotate the elements + + Parameters: + IDsOfElements: list of elements ids + Axis: the axis of rotation (AxisStruct or geom line) + AngleInRadians: the angle of rotation (in radians) or a name of variable which defines angle in degrees + Copy: allows copying the rotated elements + MakeGroups: forces the generation of new groups from existing ones (if Copy) + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + + if IDsOfElements == []: IDsOfElements = self.GetElementsId() if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4512,15 +5784,21 @@ class Mesh: self.editor.Rotate(IDsOfElements, Axis, AngleInRadians, Copy) return [] - ## Create a new mesh of rotated elements - # @param IDsOfElements list of element ids - # @param Axis the axis of rotation (AxisStruct or geom line) - # @param AngleInRadians the angle of rotation (in radians) or a name of variable which defines angle in degrees - # @param MakeGroups forces the generation of new groups from existing ones - # @param NewMeshName the name of the newly created mesh - # @return instance of Mesh class - # @ingroup l2_modif_trsf def RotateMakeMesh (self, IDsOfElements, Axis, AngleInRadians, MakeGroups=0, NewMeshName=""): + """ + Create a new mesh of rotated elements + + Parameters: + IDsOfElements: list of element ids + Axis: the axis of rotation (AxisStruct or geom line) + AngleInRadians: the angle of rotation (in radians) or a name of variable which defines angle in degrees + MakeGroups: forces the generation of new groups from existing ones + NewMeshName: the name of the newly created mesh + + Returns: + instance of Mesh class + """ + if IDsOfElements == []: IDsOfElements = self.GetElementsId() if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4532,15 +5810,21 @@ class Mesh: MakeGroups, NewMeshName) return Mesh( self.smeshpyD, self.geompyD, mesh ) - ## Rotate the object - # @param theObject the object to rotate( mesh, submesh, or group) - # @param Axis the axis of rotation (AxisStruct or geom line) - # @param AngleInRadians the angle of rotation (in radians) or a name of variable which defines angle in degrees - # @param Copy allows copying the rotated elements - # @param MakeGroups forces the generation of new groups from existing ones (if Copy) - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise - # @ingroup l2_modif_trsf def RotateObject (self, theObject, Axis, AngleInRadians, Copy, MakeGroups=False): + """ + Rotate the object + + Parameters: + theObject: the object to rotate( mesh, submesh, or group) + Axis: the axis of rotation (AxisStruct or geom line) + AngleInRadians: the angle of rotation (in radians) or a name of variable which defines angle in degrees + Copy: allows copying the rotated elements + MakeGroups: forces the generation of new groups from existing ones (if Copy) + + Returns: + list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + """ + if (isinstance(theObject, Mesh)): theObject = theObject.GetMesh() if (isinstance(Axis, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4553,15 +5837,21 @@ class Mesh: self.editor.RotateObject(theObject, Axis, AngleInRadians, Copy) return [] - ## Create a new mesh from the rotated object - # @param theObject the object to rotate (mesh, submesh, or group) - # @param Axis the axis of rotation (AxisStruct or geom line) - # @param AngleInRadians the angle of rotation (in radians) or a name of variable which defines angle in degrees - # @param MakeGroups forces the generation of new groups from existing ones - # @param NewMeshName the name of the newly created mesh - # @return instance of Mesh class - # @ingroup l2_modif_trsf def RotateObjectMakeMesh(self, theObject, Axis, AngleInRadians, MakeGroups=0,NewMeshName=""): + """ + Create a new mesh from the rotated object + + Parameters: + theObject: the object to rotate (mesh, submesh, or group) + Axis: the axis of rotation (AxisStruct or geom line) + AngleInRadians: the angle of rotation (in radians) or a name of variable which defines angle in degrees + MakeGroups: forces the generation of new groups from existing ones + NewMeshName: the name of the newly created mesh + + Returns: + instance of Mesh class + """ + if (isinstance( theObject, Mesh )): theObject = theObject.GetMesh() if (isinstance(Axis, geomBuilder.GEOM._objref_GEOM_Object)): @@ -4573,27 +5863,39 @@ class Mesh: self.mesh.SetParameters(Parameters) return Mesh( self.smeshpyD, self.geompyD, mesh ) - ## Find groups of adjacent nodes within Tolerance. - # @param Tolerance the value of tolerance - # @param SeparateCornerAndMediumNodes if @c True, in quadratic mesh puts - # corner and medium nodes in separate groups thus preventing - # their further merge. - # @return the list of groups of nodes IDs (e.g. [[1,12,13],[4,25]]) - # @ingroup l2_modif_trsf def FindCoincidentNodes (self, Tolerance, SeparateCornerAndMediumNodes=False): + """ + Find groups of adjacent nodes within Tolerance. + + Parameters: + Tolerance: the value of tolerance + SeparateCornerAndMediumNodes: if *True*, in quadratic mesh puts + corner and medium nodes in separate groups thus preventing + their further merge. + + Returns: + the list of groups of nodes IDs (e.g. [[1,12,13],[4,25]]) + """ + return self.editor.FindCoincidentNodes( Tolerance, SeparateCornerAndMediumNodes ) - ## Find groups of ajacent nodes within Tolerance. - # @param Tolerance the value of tolerance - # @param SubMeshOrGroup SubMesh, Group or Filter - # @param exceptNodes list of either SubMeshes, Groups or node IDs to exclude from search - # @param SeparateCornerAndMediumNodes if @c True, in quadratic mesh puts - # corner and medium nodes in separate groups thus preventing - # their further merge. - # @return the list of groups of nodes IDs (e.g. [[1,12,13],[4,25]]) - # @ingroup l2_modif_trsf def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance, exceptNodes=[], SeparateCornerAndMediumNodes=False): + """ + Find groups of ajacent nodes within Tolerance. + + Parameters: + Tolerance: the value of tolerance + SubMeshOrGroup: SubMesh, Group or Filter + exceptNodes: list of either SubMeshes, Groups or node IDs to exclude from search + SeparateCornerAndMediumNodes: if *True*, in quadratic mesh puts + corner and medium nodes in separate groups thus preventing + their further merge. + + Returns: + the list of groups of nodes IDs (e.g. [[1,12,13],[4,25]]) + """ + unRegister = genObjUnRegister() if (isinstance( SubMeshOrGroup, Mesh )): SubMeshOrGroup = SubMeshOrGroup.GetMesh() @@ -4605,87 +5907,125 @@ class Mesh: return self.editor.FindCoincidentNodesOnPartBut(SubMeshOrGroup, Tolerance, exceptNodes, SeparateCornerAndMediumNodes) - ## Merge nodes - # @param GroupsOfNodes a list of groups of nodes IDs for merging - # (e.g. [[1,12,13],[25,4]], then nodes 12, 13 and 4 will be removed and replaced - # by nodes 1 and 25 correspondingly in all elements and groups - # @param NodesToKeep nodes to keep in the mesh: a list of groups, sub-meshes or node IDs. - # If @a NodesToKeep does not include a node to keep for some group to merge, - # then the first node in the group is kept. - # @param AvoidMakingHoles prevent merging nodes which cause removal of elements becoming - # invalid - # @ingroup l2_modif_trsf def MergeNodes (self, GroupsOfNodes, NodesToKeep=[], AvoidMakingHoles=False): + """ + Merge nodes + + Parameters: + GroupsOfNodes: a list of groups of nodes IDs for merging + (e.g. [[1,12,13],[25,4]], then nodes 12, 13 and 4 will be removed and replaced + by nodes 1 and 25 correspondingly in all elements and groups + NodesToKeep: nodes to keep in the mesh: a list of groups, sub-meshes or node IDs. + If *NodesToKeep* does not include a node to keep for some group to merge, + then the first node in the group is kept. + AvoidMakingHoles: prevent merging nodes which cause removal of elements becoming + invalid + """ + + # NodesToKeep are converted to SMESH_IDSource in meshEditor.MergeNodes() self.editor.MergeNodes( GroupsOfNodes, NodesToKeep, AvoidMakingHoles ) - ## Find the elements built on the same nodes. - # @param MeshOrSubMeshOrGroup Mesh or SubMesh, or Group of elements for searching - # @return the list of groups of equal elements IDs (e.g. [[1,12,13],[4,25]]) - # @ingroup l2_modif_trsf def FindEqualElements (self, MeshOrSubMeshOrGroup=None): + """ + Find the elements built on the same nodes. + + Parameters: + MeshOrSubMeshOrGroup: Mesh or SubMesh, or Group of elements for searching + + Returns: + the list of groups of equal elements IDs (e.g. [[1,12,13],[4,25]]) + """ + if not MeshOrSubMeshOrGroup: MeshOrSubMeshOrGroup=self.mesh elif isinstance( MeshOrSubMeshOrGroup, Mesh ): MeshOrSubMeshOrGroup = MeshOrSubMeshOrGroup.GetMesh() return self.editor.FindEqualElements( MeshOrSubMeshOrGroup ) - ## Merge elements in each given group. - # @param GroupsOfElementsID a list of groups of elements IDs for merging - # (e.g. [[1,12,13],[25,4]], then elements 12, 13 and 4 will be removed and - # replaced by elements 1 and 25 in all groups) - # @ingroup l2_modif_trsf def MergeElements(self, GroupsOfElementsID): + """ + Merge elements in each given group. + + Parameters: + GroupsOfElementsID: a list of groups of elements IDs for merging + (e.g. [[1,12,13],[25,4]], then elements 12, 13 and 4 will be removed and + replaced by elements 1 and 25 in all groups) + """ + self.editor.MergeElements(GroupsOfElementsID) - ## Leave one element and remove all other elements built on the same nodes. - # @ingroup l2_modif_trsf def MergeEqualElements(self): + """ + Leave one element and remove all other elements built on the same nodes. + """ + self.editor.MergeEqualElements() - ## Returns all or only closed free borders - # @return list of SMESH.FreeBorder's - # @ingroup l2_modif_trsf def FindFreeBorders(self, ClosedOnly=True): + """ + Returns all or only closed free borders + + Returns: + list of SMESH.FreeBorder's + """ + return self.editor.FindFreeBorders( ClosedOnly ) - ## Fill with 2D elements a hole defined by a SMESH.FreeBorder. - # @param FreeBorder either a SMESH.FreeBorder or a list on node IDs. These nodes - # must describe all sequential nodes of the hole border. The first and the last - # nodes must be the same. Use FindFreeBorders() to get nodes of holes. - # @ingroup l2_modif_trsf def FillHole(self, holeNodes): + """ + Fill with 2D elements a hole defined by a SMESH.FreeBorder. + + Parameters: + FreeBorder: either a SMESH.FreeBorder or a list on node IDs. These nodes + must describe all sequential nodes of the hole border. The first and the last + nodes must be the same. Use FindFreeBorders() to get nodes of holes. + """ + + if holeNodes and isinstance( holeNodes, list ) and isinstance( holeNodes[0], int ): holeNodes = SMESH.FreeBorder(nodeIDs=holeNodes) if not isinstance( holeNodes, SMESH.FreeBorder ): raise TypeError, "holeNodes must be either SMESH.FreeBorder or list of integer and not %s" % holeNodes self.editor.FillHole( holeNodes ) - ## Return groups of FreeBorder's coincident within the given tolerance. - # @param tolerance the tolerance. If the tolerance <= 0.0 then one tenth of an average - # size of elements adjacent to free borders being compared is used. - # @return SMESH.CoincidentFreeBorders structure - # @ingroup l2_modif_trsf def FindCoincidentFreeBorders (self, tolerance=0.): + """ + Return groups of FreeBorder's coincident within the given tolerance. + + Parameters: + tolerance: the tolerance. If the tolerance <= 0.0 then one tenth of an average + size of elements adjacent to free borders being compared is used. + + Returns: + SMESH.CoincidentFreeBorders structure + """ + return self.editor.FindCoincidentFreeBorders( tolerance ) - - ## Sew FreeBorder's of each group - # @param freeBorders either a SMESH.CoincidentFreeBorders structure or a list of lists - # where each enclosed list contains node IDs of a group of coincident free - # borders such that each consequent triple of IDs within a group describes - # a free border in a usual way: n1, n2, nLast - i.e. 1st node, 2nd node and - # last node of a border. - # For example [[1, 2, 10, 20, 21, 40], [11, 12, 15, 55, 54, 41]] describes two - # groups of coincident free borders, each group including two borders. - # @param createPolygons if @c True faces adjacent to free borders are converted to - # polygons if a node of opposite border falls on a face edge, else such - # faces are split into several ones. - # @param createPolyhedra if @c True volumes adjacent to free borders are converted to - # polyhedra if a node of opposite border falls on a volume edge, else such - # volumes, if any, remain intact and the mesh becomes non-conformal. - # @return a number of successfully sewed groups - # @ingroup l2_modif_trsf + def SewCoincidentFreeBorders (self, freeBorders, createPolygons=False, createPolyhedra=False): + """ + Sew FreeBorder's of each group + + Parameters: + freeBorders: either a SMESH.CoincidentFreeBorders structure or a list of lists + where each enclosed list contains node IDs of a group of coincident free + borders such that each consequent triple of IDs within a group describes + a free border in a usual way: n1, n2, nLast - i.e. 1st node, 2nd node and + last node of a border. + For example [[1, 2, 10, 20, 21, 40], [11, 12, 15, 55, 54, 41]] describes two + groups of coincident free borders, each group including two borders. + createPolygons: if :code:`True` faces adjacent to free borders are converted to + polygons if a node of opposite border falls on a face edge, else such + faces are split into several ones. + createPolyhedra: if :code:`True` volumes adjacent to free borders are converted to + polyhedra if a node of opposite border falls on a volume edge, else such + volumes, if any, remain intact and the mesh becomes non-conformal. + + Returns: + a number of successfully sewed groups + """ + if freeBorders and isinstance( freeBorders, list ): # construct SMESH.CoincidentFreeBorders if isinstance( freeBorders[0], int ): @@ -4707,89 +6047,127 @@ class Mesh: return self.editor.SewCoincidentFreeBorders( freeBorders, createPolygons, createPolyhedra ) - ## Sew free borders - # @return SMESH::Sew_Error - # @ingroup l2_modif_trsf def SewFreeBorders (self, FirstNodeID1, SecondNodeID1, LastNodeID1, FirstNodeID2, SecondNodeID2, LastNodeID2, CreatePolygons, CreatePolyedrs): + """ + Sew free borders + + Returns: + SMESH::Sew_Error + """ + return self.editor.SewFreeBorders(FirstNodeID1, SecondNodeID1, LastNodeID1, FirstNodeID2, SecondNodeID2, LastNodeID2, CreatePolygons, CreatePolyedrs) - ## Sew conform free borders - # @return SMESH::Sew_Error - # @ingroup l2_modif_trsf def SewConformFreeBorders (self, FirstNodeID1, SecondNodeID1, LastNodeID1, FirstNodeID2, SecondNodeID2): + """ + Sew conform free borders + + Returns: + SMESH::Sew_Error + """ + return self.editor.SewConformFreeBorders(FirstNodeID1, SecondNodeID1, LastNodeID1, FirstNodeID2, SecondNodeID2) - ## Sew border to side - # @return SMESH::Sew_Error - # @ingroup l2_modif_trsf def SewBorderToSide (self, FirstNodeIDOnFreeBorder, SecondNodeIDOnFreeBorder, LastNodeIDOnFreeBorder, FirstNodeIDOnSide, LastNodeIDOnSide, CreatePolygons, CreatePolyedrs): + """ + Sew border to side + + Returns: + SMESH::Sew_Error + """ + return self.editor.SewBorderToSide(FirstNodeIDOnFreeBorder, SecondNodeIDOnFreeBorder, LastNodeIDOnFreeBorder, FirstNodeIDOnSide, LastNodeIDOnSide, CreatePolygons, CreatePolyedrs) - ## Sew two sides of a mesh. The nodes belonging to Side1 are - # merged with the nodes of elements of Side2. - # The number of elements in theSide1 and in theSide2 must be - # equal and they should have similar nodal connectivity. - # The nodes to merge should belong to side borders and - # the first node should be linked to the second. - # @return SMESH::Sew_Error - # @ingroup l2_modif_trsf def SewSideElements (self, IDsOfSide1Elements, IDsOfSide2Elements, NodeID1OfSide1ToMerge, NodeID1OfSide2ToMerge, NodeID2OfSide1ToMerge, NodeID2OfSide2ToMerge): + """ + Sew two sides of a mesh. The nodes belonging to Side1 are + merged with the nodes of elements of Side2. + The number of elements in theSide1 and in theSide2 must be + equal and they should have similar nodal connectivity. + The nodes to merge should belong to side borders and + the first node should be linked to the second. + + Returns: + SMESH::Sew_Error + """ + return self.editor.SewSideElements(IDsOfSide1Elements, IDsOfSide2Elements, NodeID1OfSide1ToMerge, NodeID1OfSide2ToMerge, NodeID2OfSide1ToMerge, NodeID2OfSide2ToMerge) - ## Set new nodes for the given element. - # @param ide the element id - # @param newIDs nodes ids - # @return If the number of nodes does not correspond to the type of element - return false - # @ingroup l2_modif_edit def ChangeElemNodes(self, ide, newIDs): + """ + Set new nodes for the given element. + + Parameters: + ide: the element id + newIDs: nodes ids + + Returns: + If the number of nodes does not correspond to the type of element - return false + """ + return self.editor.ChangeElemNodes(ide, newIDs) - ## If during the last operation of MeshEditor some nodes were - # created, this method return the list of their IDs, \n - # if new nodes were not created - return empty list - # @return the list of integer values (can be empty) - # @ingroup l2_modif_add def GetLastCreatedNodes(self): + """ + If during the last operation of MeshEditor some nodes were + created, this method return the list of their IDs, \n + if new nodes were not created - return empty list + + Returns: + the list of integer values (can be empty) + """ + return self.editor.GetLastCreatedNodes() - ## If during the last operation of MeshEditor some elements were - # created this method return the list of their IDs, \n - # if new elements were not created - return empty list - # @return the list of integer values (can be empty) - # @ingroup l2_modif_add def GetLastCreatedElems(self): + """ + If during the last operation of MeshEditor some elements were + created this method return the list of their IDs, \n + if new elements were not created - return empty list + + Returns: + the list of integer values (can be empty) + """ + return self.editor.GetLastCreatedElems() - ## Forget what nodes and elements were created by the last mesh edition operation - # @ingroup l2_modif_add def ClearLastCreated(self): + """ + Forget what nodes and elements were created by the last mesh edition operation + """ + self.editor.ClearLastCreated() - ## Create duplicates of given elements, i.e. create new elements based on the - # same nodes as the given ones. - # @param theElements - container of elements to duplicate. It can be a Mesh, - # sub-mesh, group, filter or a list of element IDs. If \a theElements is - # a Mesh, elements of highest dimension are duplicated - # @param theGroupName - a name of group to contain the generated elements. - # If a group with such a name already exists, the new elements - # are added to the existng group, else a new group is created. - # If \a theGroupName is empty, new elements are not added - # in any group. - # @return a group where the new elements are added. None if theGroupName == "". - # @ingroup l2_modif_duplicat def DoubleElements(self, theElements, theGroupName=""): + """ + Create duplicates of given elements, i.e. create new elements based on the + same nodes as the given ones. + + Parameters: + theElements: container of elements to duplicate. It can be a Mesh, + sub-mesh, group, filter or a list of element IDs. If *theElements* is + a Mesh, elements of highest dimension are duplicated + theGroupName: a name of group to contain the generated elements. + If a group with such a name already exists, the new elements + are added to the existng group, else a new group is created. + If *theGroupName* is empty, new elements are not added + in any group. + + Returns: + a group where the new elements are added. None if theGroupName == "". + """ + unRegister = genObjUnRegister() if isinstance( theElements, Mesh ): theElements = theElements.mesh @@ -4798,86 +6176,128 @@ class Mesh: unRegister.set( theElements ) return self.editor.DoubleElements(theElements, theGroupName) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # @param theNodes identifiers of nodes to be doubled - # @param theModifiedElems identifiers of elements to be updated by the new (doubled) - # nodes. If list of element identifiers is empty then nodes are doubled but - # they not assigned to elements - # @return TRUE if operation has been completed successfully, FALSE otherwise - # @ingroup l2_modif_duplicat def DoubleNodes(self, theNodes, theModifiedElems): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + + Parameters: + theNodes: identifiers of nodes to be doubled + theModifiedElems: identifiers of elements to be updated by the new (doubled) + nodes. If list of element identifiers is empty then nodes are doubled but + they not assigned to elements + + Returns: + TRUE if operation has been completed successfully, FALSE otherwise + """ + return self.editor.DoubleNodes(theNodes, theModifiedElems) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # This method provided for convenience works as DoubleNodes() described above. - # @param theNodeId identifiers of node to be doubled - # @param theModifiedElems identifiers of elements to be updated - # @return TRUE if operation has been completed successfully, FALSE otherwise - # @ingroup l2_modif_duplicat def DoubleNode(self, theNodeId, theModifiedElems): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + This method provided for convenience works as DoubleNodes() described above. + + Parameters: + theNodeId: identifiers of node to be doubled + theModifiedElems: identifiers of elements to be updated + + Returns: + TRUE if operation has been completed successfully, FALSE otherwise + """ + return self.editor.DoubleNode(theNodeId, theModifiedElems) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # This method provided for convenience works as DoubleNodes() described above. - # @param theNodes group of nodes to be doubled - # @param theModifiedElems group of elements to be updated. - # @param theMakeGroup forces the generation of a group containing new nodes. - # @return TRUE or a created group if operation has been completed successfully, - # FALSE or None otherwise - # @ingroup l2_modif_duplicat def DoubleNodeGroup(self, theNodes, theModifiedElems, theMakeGroup=False): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + This method provided for convenience works as DoubleNodes() described above. + + Parameters: + theNodes: group of nodes to be doubled + theModifiedElems: group of elements to be updated. + theMakeGroup: forces the generation of a group containing new nodes. + + Returns: + TRUE or a created group if operation has been completed successfully, + FALSE or None otherwise + """ + if theMakeGroup: return self.editor.DoubleNodeGroupNew(theNodes, theModifiedElems) return self.editor.DoubleNodeGroup(theNodes, theModifiedElems) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # This method provided for convenience works as DoubleNodes() described above. - # @param theNodes list of groups of nodes to be doubled - # @param theModifiedElems list of groups of elements to be updated. - # @param theMakeGroup forces the generation of a group containing new nodes. - # @return TRUE if operation has been completed successfully, FALSE otherwise - # @ingroup l2_modif_duplicat def DoubleNodeGroups(self, theNodes, theModifiedElems, theMakeGroup=False): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + This method provided for convenience works as DoubleNodes() described above. + + Parameters: + theNodes: list of groups of nodes to be doubled + theModifiedElems: list of groups of elements to be updated. + theMakeGroup: forces the generation of a group containing new nodes. + + Returns: + TRUE if operation has been completed successfully, FALSE otherwise + """ + if theMakeGroup: return self.editor.DoubleNodeGroupsNew(theNodes, theModifiedElems) return self.editor.DoubleNodeGroups(theNodes, theModifiedElems) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # @param theElems - the list of elements (edges or faces) to be replicated - # The nodes for duplication could be found from these elements - # @param theNodesNot - list of nodes to NOT replicate - # @param theAffectedElems - the list of elements (cells and edges) to which the - # replicated nodes should be associated to. - # @return TRUE if operation has been completed successfully, FALSE otherwise - # @ingroup l2_modif_duplicat def DoubleNodeElem(self, theElems, theNodesNot, theAffectedElems): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + + Parameters: + theElems: the list of elements (edges or faces) to be replicated + The nodes for duplication could be found from these elements + theNodesNot: list of nodes to NOT replicate + theAffectedElems: the list of elements (cells and edges) to which the + replicated nodes should be associated to. + + Returns: + TRUE if operation has been completed successfully, FALSE otherwise + """ + return self.editor.DoubleNodeElem(theElems, theNodesNot, theAffectedElems) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # @param theElems - the list of elements (edges or faces) to be replicated - # The nodes for duplication could be found from these elements - # @param theNodesNot - list of nodes to NOT replicate - # @param theShape - shape to detect affected elements (element which geometric center - # located on or inside shape). - # The replicated nodes should be associated to affected elements. - # @return TRUE if operation has been completed successfully, FALSE otherwise - # @ingroup l2_modif_duplicat def DoubleNodeElemInRegion(self, theElems, theNodesNot, theShape): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + + Parameters: + theElems: the list of elements (edges or faces) to be replicated + The nodes for duplication could be found from these elements + theNodesNot: list of nodes to NOT replicate + theShape: shape to detect affected elements (element which geometric center + located on or inside shape). + The replicated nodes should be associated to affected elements. + + Returns: + TRUE if operation has been completed successfully, FALSE otherwise + """ + return self.editor.DoubleNodeElemInRegion(theElems, theNodesNot, theShape) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # This method provided for convenience works as DoubleNodes() described above. - # @param theElems - group of of elements (edges or faces) to be replicated - # @param theNodesNot - group of nodes not to replicated - # @param theAffectedElems - group of elements to which the replicated nodes - # should be associated to. - # @param theMakeGroup forces the generation of a group containing new elements. - # @param theMakeNodeGroup forces the generation of a group containing new nodes. - # @return TRUE or created groups (one or two) if operation has been completed successfully, - # FALSE or None otherwise - # @ingroup l2_modif_duplicat def DoubleNodeElemGroup(self, theElems, theNodesNot, theAffectedElems, theMakeGroup=False, theMakeNodeGroup=False): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + This method provided for convenience works as DoubleNodes() described above. + + Parameters: + theElems: group of of elements (edges or faces) to be replicated + theNodesNot: group of nodes not to replicated + theAffectedElems: group of elements to which the replicated nodes + should be associated to. + theMakeGroup: forces the generation of a group containing new elements. + theMakeNodeGroup: forces the generation of a group containing new nodes. + + Returns: + TRUE or created groups (one or two) if operation has been completed successfully, + FALSE or None otherwise + """ + if theMakeGroup or theMakeNodeGroup: twoGroups = self.editor.DoubleNodeElemGroup2New(theElems, theNodesNot, theAffectedElems, @@ -4888,30 +6308,40 @@ class Mesh: return twoGroups[ int(theMakeNodeGroup) ] return self.editor.DoubleNodeElemGroup(theElems, theNodesNot, theAffectedElems) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # This method provided for convenience works as DoubleNodes() described above. - # @param theElems - group of of elements (edges or faces) to be replicated - # @param theNodesNot - group of nodes not to replicated - # @param theShape - shape to detect affected elements (element which geometric center - # located on or inside shape). - # The replicated nodes should be associated to affected elements. - # @ingroup l2_modif_duplicat def DoubleNodeElemGroupInRegion(self, theElems, theNodesNot, theShape): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + This method provided for convenience works as DoubleNodes() described above. + + Parameters: + theElems: group of of elements (edges or faces) to be replicated + theNodesNot: group of nodes not to replicated + theShape: shape to detect affected elements (element which geometric center + located on or inside shape). + The replicated nodes should be associated to affected elements. + """ + return self.editor.DoubleNodeElemGroupInRegion(theElems, theNodesNot, theShape) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # This method provided for convenience works as DoubleNodes() described above. - # @param theElems - list of groups of elements (edges or faces) to be replicated - # @param theNodesNot - list of groups of nodes not to replicated - # @param theAffectedElems - group of elements to which the replicated nodes - # should be associated to. - # @param theMakeGroup forces the generation of a group containing new elements. - # @param theMakeNodeGroup forces the generation of a group containing new nodes. - # @return TRUE or created groups (one or two) if operation has been completed successfully, - # FALSE or None otherwise - # @ingroup l2_modif_duplicat def DoubleNodeElemGroups(self, theElems, theNodesNot, theAffectedElems, theMakeGroup=False, theMakeNodeGroup=False): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + This method provided for convenience works as DoubleNodes() described above. + + Parameters: + theElems: list of groups of elements (edges or faces) to be replicated + theNodesNot: list of groups of nodes not to replicated + theAffectedElems: group of elements to which the replicated nodes + should be associated to. + theMakeGroup: forces the generation of a group containing new elements. + theMakeNodeGroup: forces the generation of a group containing new nodes. + + Returns: + TRUE or created groups (one or two) if operation has been completed successfully, + FALSE or None otherwise + """ + if theMakeGroup or theMakeNodeGroup: twoGroups = self.editor.DoubleNodeElemGroups2New(theElems, theNodesNot, theAffectedElems, @@ -4922,68 +6352,99 @@ class Mesh: return twoGroups[ int(theMakeNodeGroup) ] return self.editor.DoubleNodeElemGroups(theElems, theNodesNot, theAffectedElems) - ## Create a hole in a mesh by doubling the nodes of some particular elements - # This method provided for convenience works as DoubleNodes() described above. - # @param theElems - list of groups of elements (edges or faces) to be replicated - # @param theNodesNot - list of groups of nodes not to replicated - # @param theShape - shape to detect affected elements (element which geometric center - # located on or inside shape). - # The replicated nodes should be associated to affected elements. - # @return TRUE if operation has been completed successfully, FALSE otherwise - # @ingroup l2_modif_duplicat def DoubleNodeElemGroupsInRegion(self, theElems, theNodesNot, theShape): + """ + Create a hole in a mesh by doubling the nodes of some particular elements + This method provided for convenience works as DoubleNodes() described above. + + Parameters: + theElems: list of groups of elements (edges or faces) to be replicated + theNodesNot: list of groups of nodes not to replicated + theShape: shape to detect affected elements (element which geometric center + located on or inside shape). + The replicated nodes should be associated to affected elements. + + Returns: + TRUE if operation has been completed successfully, FALSE otherwise + """ + return self.editor.DoubleNodeElemGroupsInRegion(theElems, theNodesNot, theShape) - ## Identify the elements that will be affected by node duplication (actual duplication is not performed. - # This method is the first step of DoubleNodeElemGroupsInRegion. - # @param theElems - list of groups of nodes or elements (edges or faces) to be replicated - # @param theNodesNot - list of groups of nodes not to replicated - # @param theShape - shape to detect affected elements (element which geometric center - # located on or inside shape). - # The replicated nodes should be associated to affected elements. - # @return groups of affected elements in order: volumes, faces, edges - # @ingroup l2_modif_duplicat def AffectedElemGroupsInRegion(self, theElems, theNodesNot, theShape): + """ + Identify the elements that will be affected by node duplication (actual duplication is not performed. + This method is the first step of DoubleNodeElemGroupsInRegion. + + Parameters: + theElems: list of groups of nodes or elements (edges or faces) to be replicated + theNodesNot: list of groups of nodes not to replicated + theShape: shape to detect affected elements (element which geometric center + located on or inside shape). + The replicated nodes should be associated to affected elements. + + Returns: + groups of affected elements in order:: volumes, faces, edges + """ + return self.editor.AffectedElemGroupsInRegion(theElems, theNodesNot, theShape) - ## Double nodes on shared faces between groups of volumes and create flat elements on demand. - # The list of groups must describe a partition of the mesh volumes. - # The nodes of the internal faces at the boundaries of the groups are doubled. - # In option, the internal faces are replaced by flat elements. - # Triangles are transformed in prisms, and quadrangles in hexahedrons. - # @param theDomains - list of groups of volumes - # @param createJointElems - if TRUE, create the elements - # @param onAllBoundaries - if TRUE, the nodes and elements are also created on - # the boundary between \a theDomains and the rest mesh - # @return TRUE if operation has been completed successfully, FALSE otherwise - # @ingroup l2_modif_duplicat def DoubleNodesOnGroupBoundaries(self, theDomains, createJointElems, onAllBoundaries=False ): - return self.editor.DoubleNodesOnGroupBoundaries( theDomains, createJointElems, onAllBoundaries ) - - ## Double nodes on some external faces and create flat elements. - # Flat elements are mainly used by some types of mechanic calculations. - # - # Each group of the list must be constituted of faces. - # Triangles are transformed in prisms, and quadrangles in hexahedrons. - # @param theGroupsOfFaces - list of groups of faces - # @return TRUE if operation has been completed successfully, FALSE otherwise - # @ingroup l2_modif_duplicat + """ + Double nodes on shared faces between groups of volumes and create flat elements on demand. + The list of groups must describe a partition of the mesh volumes. + The nodes of the internal faces at the boundaries of the groups are doubled. + In option, the internal faces are replaced by flat elements. + Triangles are transformed in prisms, and quadrangles in hexahedrons. + + Parameters: + theDomains: list of groups of volumes + createJointElems: if TRUE, create the elements + onAllBoundaries: if TRUE, the nodes and elements are also created on + the boundary between *theDomains* and the rest mesh + + Returns: + TRUE if operation has been completed successfully, FALSE otherwise + """ + + return self.editor.DoubleNodesOnGroupBoundaries( theDomains, createJointElems, onAllBoundaries ) + def CreateFlatElementsOnFacesGroups(self, theGroupsOfFaces ): + """ + Double nodes on some external faces and create flat elements. + Flat elements are mainly used by some types of mechanic calculations. + + Each group of the list must be constituted of faces. + Triangles are transformed in prisms, and quadrangles in hexahedrons. + + Parameters: + theGroupsOfFaces: list of groups of faces + + Returns: + TRUE if operation has been completed successfully, FALSE otherwise + """ + return self.editor.CreateFlatElementsOnFacesGroups( theGroupsOfFaces ) - - ## identify all the elements around a geom shape, get the faces delimiting the hole - # + def CreateHoleSkin(self, radius, theShape, groupName, theNodesCoords): + """ + identify all the elements around a geom shape, get the faces delimiting the hole + """ return self.editor.CreateHoleSkin( radius, theShape, groupName, theNodesCoords ) - ## Return a cached numerical functor by its type. - # @param theCriterion functor type - an item of SMESH.FunctorType enumeration. - # Type SMESH.FunctorType._items in the Python Console to see all items. - # Note that not all items correspond to numerical functors. - # @return SMESH_NumericalFunctor. The functor is already initialized - # with a mesh - # @ingroup l1_measurements def GetFunctor(self, funcType ): + """ + Return a cached numerical functor by its type. + + Parameters: + theCriterion functor type: an item of SMESH.FunctorType enumeration. + Type SMESH.FunctorType._items in the Python Console to see all items. + Note that not all items correspond to numerical functors. + + Returns: + SMESH_NumericalFunctor. The functor is already initialized + with a mesh + """ + fn = self.functors[ funcType._v ] if not fn: fn = self.smeshpyD.GetFunctor(funcType) @@ -4991,14 +6452,20 @@ class Mesh: self.functors[ funcType._v ] = fn return fn - ## Return value of a functor for a given element - # @param funcType an item of SMESH.FunctorType enum - # Type "SMESH.FunctorType._items" in the Python Console to see all items. - # @param elemId element or node ID - # @param isElem @a elemId is ID of element or node - # @return the functor value or zero in case of invalid arguments - # @ingroup l1_measurements def FunctorValue(self, funcType, elemId, isElem=True): + """ + Return value of a functor for a given element + + Parameters: + funcType: an item of SMESH.FunctorType enum + Type "SMESH.FunctorType._items" in the Python Console to see all items. + elemId: element or node ID + isElem: *elemId* is ID of element or node + + Returns: + the functor value or zero in case of invalid arguments + """ + fn = self.GetFunctor( funcType ) if fn.GetElementType() == self.GetElementType(elemId, isElem): val = fn.GetValue(elemId) @@ -5006,11 +6473,17 @@ class Mesh: val = 0 return val - ## Get length of 1D element or sum of lengths of all 1D mesh elements - # @param elemId mesh element ID (if not defined - sum of length of all 1D elements will be calculated) - # @return element's length value if \a elemId is specified or sum of all 1D mesh elements' lengths otherwise - # @ingroup l1_measurements def GetLength(self, elemId=None): + """ + Get length of 1D element or sum of lengths of all 1D mesh elements + + Parameters: + elemId mesh element ID (if not defined - sum of length of all 1D elements will be calculated) + + Returns: + element's length value if *elemId* is specified or sum of all 1D mesh elements' lengths otherwise + """ + length = 0 if elemId == None: length = self.smeshpyD.GetLength(self) @@ -5018,11 +6491,15 @@ class Mesh: length = self.FunctorValue(SMESH.FT_Length, elemId) return length - ## Get area of 2D element or sum of areas of all 2D mesh elements - # @param elemId mesh element ID (if not defined - sum of areas of all 2D elements will be calculated) - # @return element's area value if \a elemId is specified or sum of all 2D mesh elements' areas otherwise - # @ingroup l1_measurements def GetArea(self, elemId=None): + """ + Get area of 2D element or sum of areas of all 2D mesh elements + elemId mesh element ID (if not defined - sum of areas of all 2D elements will be calculated) + + Returns: + element's area value if *elemId* is specified or sum of all 2D mesh elements' areas otherwise + """ + area = 0 if elemId == None: area = self.smeshpyD.GetArea(self) @@ -5030,11 +6507,15 @@ class Mesh: area = self.FunctorValue(SMESH.FT_Area, elemId) return area - ## Get volume of 3D element or sum of volumes of all 3D mesh elements - # @param elemId mesh element ID (if not defined - sum of volumes of all 3D elements will be calculated) - # @return element's volume value if \a elemId is specified or sum of all 3D mesh elements' volumes otherwise - # @ingroup l1_measurements def GetVolume(self, elemId=None): + """ + Get volume of 3D element or sum of volumes of all 3D mesh elements + elemId mesh element ID (if not defined - sum of volumes of all 3D elements will be calculated) + + Returns: + element's volume value if *elemId* is specified or sum of all 3D mesh elements' volumes otherwise + """ + volume = 0 if elemId == None: volume = self.smeshpyD.GetVolume(self) @@ -5042,63 +6523,105 @@ class Mesh: volume = self.FunctorValue(SMESH.FT_Volume3D, elemId) return volume - ## Get maximum element length. - # @param elemId mesh element ID - # @return element's maximum length value - # @ingroup l1_measurements def GetMaxElementLength(self, elemId): + """ + Get maximum element length. + + Parameters: + elemId mesh element ID + + Returns: + element's maximum length value + """ + if self.GetElementType(elemId, True) == SMESH.VOLUME: ftype = SMESH.FT_MaxElementLength3D else: ftype = SMESH.FT_MaxElementLength2D return self.FunctorValue(ftype, elemId) - ## Get aspect ratio of 2D or 3D element. - # @param elemId mesh element ID - # @return element's aspect ratio value - # @ingroup l1_measurements def GetAspectRatio(self, elemId): + """ + Get aspect ratio of 2D or 3D element. + + Parameters: + elemId mesh element ID + + Returns: + element's aspect ratio value + """ + if self.GetElementType(elemId, True) == SMESH.VOLUME: ftype = SMESH.FT_AspectRatio3D else: ftype = SMESH.FT_AspectRatio return self.FunctorValue(ftype, elemId) - ## Get warping angle of 2D element. - # @param elemId mesh element ID - # @return element's warping angle value - # @ingroup l1_measurements def GetWarping(self, elemId): + """ + Get warping angle of 2D element. + + Parameters: + elemId mesh element ID + + Returns: + element's warping angle value + """ + return self.FunctorValue(SMESH.FT_Warping, elemId) - ## Get minimum angle of 2D element. - # @param elemId mesh element ID - # @return element's minimum angle value - # @ingroup l1_measurements def GetMinimumAngle(self, elemId): + """ + Get minimum angle of 2D element. + + Parameters: + elemId mesh element ID + + Returns: + element's minimum angle value + """ + return self.FunctorValue(SMESH.FT_MinimumAngle, elemId) - ## Get taper of 2D element. - # @param elemId mesh element ID - # @return element's taper value - # @ingroup l1_measurements def GetTaper(self, elemId): + """ + Get taper of 2D element. + + Parameters: + elemId mesh element ID + + Returns: + element's taper value + """ + return self.FunctorValue(SMESH.FT_Taper, elemId) - ## Get skew of 2D element. - # @param elemId mesh element ID - # @return element's skew value - # @ingroup l1_measurements def GetSkew(self, elemId): + """ + Get skew of 2D element. + + Parameters: + elemId mesh element ID + + Returns: + element's skew value + """ + return self.FunctorValue(SMESH.FT_Skew, elemId) - ## Return minimal and maximal value of a given functor. - # @param funType a functor type, an item of SMESH.FunctorType enum - # (one of SMESH.FunctorType._items) - # @param meshPart a part of mesh (group, sub-mesh) to treat - # @return tuple (min,max) - # @ingroup l1_measurements def GetMinMax(self, funType, meshPart=None): + """ + Return minimal and maximal value of a given functor. + + Parameters: + funType a functor type, an item of SMESH.FunctorType enum + (one of SMESH.FunctorType._items) + meshPart a part of mesh (group, sub-mesh) to treat + + Returns: + tuple (min,max) + """ + unRegister = genObjUnRegister() if isinstance( meshPart, list ): meshPart = self.GetIDSource( meshPart, SMESH.ALL ) @@ -5120,10 +6643,11 @@ class Mesh: pass # end of Mesh class -## Private class used to compensate change of CORBA API of SMESH_Mesh for backward compatibility -# with old dump scripts which call SMESH_Mesh directly and not via smeshBuilder.Mesh -# class meshProxy(SMESH._objref_SMESH_Mesh): + """ + Private class used to compensate change of CORBA API of SMESH_Mesh for backward compatibility + with old dump scripts which call SMESH_Mesh directly and not via smeshBuilder.Mesh + """ def __init__(self): SMESH._objref_SMESH_Mesh.__init__(self) def __deepcopy__(self, memo=None): @@ -5137,9 +6661,10 @@ class meshProxy(SMESH._objref_SMESH_Mesh): omniORB.registerObjref(SMESH._objref_SMESH_Mesh._NP_RepositoryId, meshProxy) -## Private class wrapping SMESH.SMESH_SubMesh in order to add Compute() -# class submeshProxy(SMESH._objref_SMESH_subMesh): + """ + Private class wrapping SMESH.SMESH_SubMesh in order to add Compute() + """ def __init__(self): SMESH._objref_SMESH_subMesh.__init__(self) self.mesh = None @@ -5147,14 +6672,17 @@ class submeshProxy(SMESH._objref_SMESH_subMesh): new = self.__class__() return new - ## Compute the sub-mesh and return the status of the computation - # @param refresh if @c True, Object browser is automatically updated (when running in GUI) - # @return True or False - # - # This is a method of SMESH.SMESH_submesh that can be obtained via Mesh.GetSubMesh() or - # @ref smesh_algorithm.Mesh_Algorithm.GetSubMesh() "Mesh_Algorithm.GetSubMesh()". - # @ingroup l2_submeshes def Compute(self,refresh=False): + """ + Compute the sub-mesh and return the status of the computation + refresh if *True*, Object browser is automatically updated (when running in GUI) + + Returns: + True or False + This is a method of SMESH.SMESH_submesh that can be obtained via Mesh.GetSubMesh() or + :meth:`smeshBuilder.Mesh.GetSubMesh`. + """ + if not self.mesh: self.mesh = Mesh( smeshBuilder(), None, self.GetMesh()) @@ -5172,11 +6700,12 @@ class submeshProxy(SMESH._objref_SMESH_subMesh): omniORB.registerObjref(SMESH._objref_SMESH_subMesh._NP_RepositoryId, submeshProxy) -## Private class used to compensate change of CORBA API of SMESH_MeshEditor for backward -# compatibility with old dump scripts which call SMESH_MeshEditor directly and not via -# smeshBuilder.Mesh -# class meshEditor(SMESH._objref_SMESH_MeshEditor): + """ + Private class used to compensate change of CORBA API of SMESH_MeshEditor for backward + compatibility with old dump scripts which call SMESH_MeshEditor directly and not via + smeshBuilder.Mesh + """ def __init__(self): SMESH._objref_SMESH_MeshEditor.__init__(self) self.mesh = None @@ -5213,10 +6742,11 @@ class meshEditor(SMESH._objref_SMESH_MeshEditor): pass omniORB.registerObjref(SMESH._objref_SMESH_MeshEditor._NP_RepositoryId, meshEditor) -## Private class wrapping SMESH.SMESH_Pattern CORBA class in order to treat Notebook -# variables in some methods -# class Pattern(SMESH._objref_SMESH_Pattern): + """ + Private class wrapping SMESH.SMESH_Pattern CORBA class in order to treat Notebook + variables in some methods + """ def LoadFromFile(self, patternTextOrFile ): text = patternTextOrFile @@ -5242,20 +6772,26 @@ class Pattern(SMESH._objref_SMESH_Pattern): mesh = mesh.GetMesh() return SMESH._objref_SMESH_Pattern.MakeMesh( self, mesh, CreatePolygons, CreatePolyhedra ) -# Registering the new proxy for Pattern omniORB.registerObjref(SMESH._objref_SMESH_Pattern._NP_RepositoryId, Pattern) +""" +Registering the new proxy for Pattern +""" -## Private class used to bind methods creating algorithms to the class Mesh -# class algoCreator: + """ + Private class used to bind methods creating algorithms to the class Mesh + """ + def __init__(self, method): self.mesh = None self.defaultAlgoType = "" self.algoTypeToClass = {} self.method = method - # Store a python class of algorithm def add(self, algoClass): + """ + Store a python class of algorithm + """ if type( algoClass ).__name__ == 'classobj' and \ hasattr( algoClass, "algoType"): self.algoTypeToClass[ algoClass.algoType ] = algoClass @@ -5264,16 +6800,21 @@ class algoCreator: self.defaultAlgoType = algoClass.algoType #print "Add",algoClass.algoType, "dflt",self.defaultAlgoType - # Create a copy of self and assign mesh to the copy def copy(self, mesh): + """ + Create a copy of self and assign mesh to the copy + """ + other = algoCreator( self.method ) other.defaultAlgoType = self.defaultAlgoType other.algoTypeToClass = self.algoTypeToClass other.mesh = mesh return other - # Create an instance of algorithm def __call__(self,algo="",geom=0,*args): + """ + Create an instance of algorithm + """ algoType = "" shape = 0 if isinstance( algo, str ): @@ -5311,17 +6852,22 @@ class algoCreator: raise RuntimeError, "No class found for algo type %s" % algoType return None -## Private class used to substitute and store variable parameters of hypotheses. -# class hypMethodWrapper: + """ + Private class used to substitute and store variable parameters of hypotheses. + """ + def __init__(self, hyp, method): self.hyp = hyp self.method = method #print "REBIND:", method.__name__ return - # call a method of hypothesis with calling SetVarParameter() before def __call__(self,*args): + """ + call a method of hypothesis with calling SetVarParameter() before + """ + if not args: return self.method( self.hyp, *args ) # hypothesis method with no args @@ -5342,9 +6888,10 @@ class hypMethodWrapper: return result pass -## A helper class that calls UnRegister() of SALOME.GenericObj'es stored in it -# class genObjUnRegister: + """ + A helper class that calls UnRegister() of SALOME.GenericObj'es stored in it + """ def __init__(self, genObj=None): self.genObjList = [] @@ -5365,10 +6912,11 @@ class genObjUnRegister: genObj.UnRegister() -## Bind methods creating mesher plug-ins to the Mesh class -# for pluginName in os.environ[ "SMESH_MeshersList" ].split( ":" ): - # + """ + Bind methods creating mesher plug-ins to the Mesh class + """ + #print "pluginName: ", pluginName pluginBuilderName = pluginName + "Builder" try: diff --git a/src/SMESH_SWIG/smesh_algorithm.py b/src/SMESH_SWIG/smesh_algorithm.py index 3690f76d8..10dbe0527 100644 --- a/src/SMESH_SWIG/smesh_algorithm.py +++ b/src/SMESH_SWIG/smesh_algorithm.py @@ -25,51 +25,63 @@ import salome from salome.geom import geomBuilder import SMESH, StdMeshers -## The base class to define meshing algorithms -# -# @note This class should not be used directly, it is supposed to be sub-classed -# for implementing Python API for specific meshing algorithms -# -# For each meshing algorithm, a python class inheriting from class %Mesh_Algorithm -# should be defined. This descendant class should have two attributes defining the way -# it is created by class Mesh (see e.g. class @ref StdMeshersBuilder.StdMeshersBuilder_Segment "StdMeshersBuilder_Segment" -# in StdMeshersBuilder package): -# - @c meshMethod attribute defines name of method of class smesh.Mesh by calling which the -# python class of algorithm is created; this method is dynamically added to the smesh.Mesh class -# in runtime. For example, if in @c class MyPlugin_Algorithm this attribute is defined as -# @code -# meshMethod = "MyAlgorithm" -# @endcode -# then an instance of @c MyPlugin_Algorithm can be created by the direct invocation of the function -# of smesh.Mesh class: -# @code -# my_algo = mesh.MyAlgorithm() -# @endcode -# - @c algoType defines type of algorithm and is used mostly to discriminate -# algorithms that are created by the same method of class smesh.Mesh. For example, if this attribute -# is specified in @c MyPlugin_Algorithm class as -# @code -# algoType = "MyPLUGIN" -# @endcode -# then it's creation code can be: -# @code -# my_algo = mesh.MyAlgorithm(algo="MyPLUGIN") -# @endcode -# @ingroup l2_algorithms class Mesh_Algorithm: + """ + The base class to define meshing algorithms + + Note: + This class should not be used directly, it is supposed to be sub-classed + for implementing Python API for specific meshing algorithms + + For each meshing algorithm, a python class inheriting from class %Mesh_Algorithm + should be defined. This descendant class should have two attributes defining the way + it is created by class Mesh (see e.g. class :ref:`StdMeshersBuilder.StdMeshersBuilder_Segment` + in StdMeshersBuilder package): + + - :code:`meshMethod` attribute defines name of method of class smesh.Mesh by calling which the + python class of algorithm is created; this method is dynamically added to the smesh.Mesh class + in runtime. For example, if in :code:`class MyPlugin_Algorithm` this attribute is defined as + :: + + meshMethod = "MyAlgorithm" + + then an instance of :code:`MyPlugin_Algorithm` can be created by the direct invocation of the function + of smesh.Mesh class: + :: + + my_algo = mesh.MyAlgorithm() + + - :code:`algoType` defines type of algorithm and is used mostly to discriminate + algorithms that are created by the same method of class smesh.Mesh. For example, if this attribute + is specified in :code:`MyPlugin_Algorithm` class as + :: + + algoType = "MyPLUGIN" + + then it's creation code can be: + :: + + my_algo = mesh.MyAlgorithm(algo="MyPLUGIN") + """ + - ## Private constuctor def __init__(self): + """ + Private constuctor + """ self.mesh = None self.geom = None self.subm = None self.algo = None pass - ## Finds a hypothesis in the study by its type name and parameters. - # Finds only the hypotheses created in smeshpyD engine. - # @return SMESH.SMESH_Hypothesis def FindHypothesis (self, hypname, args, CompareMethod, smeshpyD): + """ + Finds a hypothesis in the study by its type name and parameters. + Finds only the hypotheses created in smeshpyD engine. + Returns: + SMESH.SMESH_Hypothesis + """ study = smeshpyD.GetCurrentStudy() if not study: return None #to do: find component by smeshpyD object, not by its data type @@ -110,10 +122,14 @@ class Mesh_Algorithm: pass return None - ## Finds the algorithm in the study by its type name. - # Finds only the algorithms, which have been created in smeshpyD engine. - # @return SMESH.SMESH_Algo def FindAlgorithm (self, algoname, smeshpyD): + """ + Finds the algorithm in the study by its type name. + Finds only the algorithms, which have been created in smeshpyD engine. + + Returns: + SMESH.SMESH_Algo + """ study = smeshpyD.GetCurrentStudy() if not study: return None #to do: find component by smeshpyD object, not by its data type @@ -151,37 +167,51 @@ class Mesh_Algorithm: pass return None - ## If the algorithm is global, returns 0; \n - # else returns the submesh associated to this algorithm. def GetSubMesh(self): + """ + If the algorithm is global, returns 0; + else returns the submesh associated to this algorithm. + """ return self.subm - ## Returns the wrapped mesher. def GetAlgorithm(self): + """ + Returns the wrapped mesher. + """ return self.algo - ## Gets the list of hypothesis that can be used with this algorithm def GetCompatibleHypothesis(self): + """ + Gets the list of hypothesis that can be used with this algorithm + """ mylist = [] if self.algo: mylist = self.algo.GetCompatibleHypothesis() return mylist - ## Gets the name of the algorithm def GetName(self): + """ + Gets the name of the algorithm + """ from salome.smesh.smeshBuilder import GetName return GetName(self.algo) - ## Sets the name to the algorithm def SetName(self, name): + """ + Sets the name to the algorithm + """ self.mesh.smeshpyD.SetName(self.algo, name) - ## Gets the id of the algorithm def GetId(self): + """ + Gets the id of the algorithm + """ return self.algo.GetId() - ## Private method. def Create(self, mesh, geom, hypo, so="libStdMeshersEngine.so"): + """ + Private method. + """ if geom is None and mesh.mesh.HasShapeToMesh(): raise RuntimeError, "Attempt to create " + hypo + " algorithm on None shape" algo = self.FindAlgorithm(hypo, mesh.smeshpyD) @@ -191,8 +221,10 @@ class Mesh_Algorithm: self.Assign(algo, mesh, geom) return self.algo - ## Private method def Assign(self, algo, mesh, geom): + """ + Private method + """ from salome.smesh.smeshBuilder import AssureGeomPublished, TreatHypoStatus, GetName if geom is None and mesh.mesh.HasShapeToMesh(): raise RuntimeError, "Attempt to create " + algo + " algorithm on None shape" @@ -214,9 +246,11 @@ class Mesh_Algorithm: def CompareEqualHyp (self, hyp, args): return True - ## Private method def Hypothesis (self, hyp, args=[], so="libStdMeshersEngine.so", UseExisting=0, CompareMethod="", toAdd=True): + """ + Private method + """ from salome.smesh.smeshBuilder import TreatHypoStatus, GetName hypo = None if UseExisting: @@ -250,40 +284,47 @@ class Mesh_Algorithm: TreatHypoStatus( status, GetName(hypo), geomName, 0, self.mesh ) return hypo - ## Returns entry of the shape to mesh in the study def MainShapeEntry(self): + """ + Returns entry of the shape to mesh in the study + """ if not self.mesh or not self.mesh.GetMesh(): return "" if not self.mesh.GetMesh().HasShapeToMesh(): return "" shape = self.mesh.GetShape() return shape.GetStudyEntry() - ## Defines "ViscousLayers" hypothesis to give parameters of layers of prisms to build - # near mesh boundary. This hypothesis can be used by several 3D algorithms: - # NETGEN 3D, MG-Tetra, Hexahedron(i,j,k) - # @param thickness total thickness of layers of prisms - # @param numberOfLayers number of layers of prisms - # @param stretchFactor factor (>1.0) of growth of layer thickness towards inside of mesh - # @param faces list of geometrical faces (or their ids). - # Viscous layers are either generated on these faces or not, depending on - # the value of \a isFacesToIgnore parameter. - # @param isFacesToIgnore if \c True, the Viscous layers are not generated on the - # faces specified by the previous parameter (\a faces). - # @param extrMethod extrusion method defines how position of new nodes are found during - # prism construction and how creation of distorted and intersecting prisms is - # prevented. Possible values are: - # - StdMeshers.SURF_OFFSET_SMOOTH (default) method extrudes nodes along normal - # to underlying geometrical surface. Smoothing of internal surface of - # element layers can be used to avoid creation of invalid prisms. - # - StdMeshers.FACE_OFFSET method extrudes nodes along average normal of - # surrounding mesh faces till intersection with a neighbor mesh face - # translated along its own normal by the layers thickness. Thickness - # of layers can be limited to avoid creation of invalid prisms. - # - StdMeshers.NODE_OFFSET method extrudes nodes along average normal of - # surrounding mesh faces by the layers thickness. Thickness of - # layers can be limited to avoid creation of invalid prisms. - # @ingroup l3_hypos_additi def ViscousLayers(self, thickness, numberOfLayers, stretchFactor, faces=[], isFacesToIgnore=True, extrMethod=StdMeshers.SURF_OFFSET_SMOOTH ): + """ + Defines "ViscousLayers" hypothesis to give parameters of layers of prisms to build + near mesh boundary. This hypothesis can be used by several 3D algorithms: + NETGEN 3D, MG-Tetra, Hexahedron(i,j,k) + + Parameters: + thickness: total thickness of layers of prisms + numberOfLayers: number of layers of prisms + stretchFactor: factor (>1.0) of growth of layer thickness towards inside of mesh + faces: list of geometrical faces (or their ids). + Viscous layers are either generated on these faces or not, depending on + the value of **isFacesToIgnore** parameter. + isFacesToIgnore: if *True*, the Viscous layers are not generated on the + faces specified by the previous parameter (**faces**). + extrMethod: extrusion method defines how position of new nodes are found during + prism construction and how creation of distorted and intersecting prisms is + prevented. Possible values are: + + - StdMeshers.SURF_OFFSET_SMOOTH (default) method extrudes nodes along normal + to underlying geometrical surface. Smoothing of internal surface of + element layers can be used to avoid creation of invalid prisms. + - StdMeshers.FACE_OFFSET method extrudes nodes along average normal of + surrounding mesh faces till intersection with a neighbor mesh face + translated along its own normal by the layers thickness. Thickness + of layers can be limited to avoid creation of invalid prisms. + - StdMeshers.NODE_OFFSET method extrudes nodes along average normal of + surrounding mesh faces by the layers thickness. Thickness of + layers can be limited to avoid creation of invalid prisms. + """ + if not isinstance(self.algo, SMESH._objref_SMESH_3D_Algo): raise TypeError, "ViscousLayers are supported by 3D algorithms only" if not "ViscousLayers" in self.GetCompatibleHypothesis(): @@ -308,20 +349,24 @@ class Mesh_Algorithm: self.mesh.AddHypothesis( hyp, self.geom ) return hyp - ## Defines "ViscousLayers2D" hypothesis to give parameters of layers of quadrilateral - # elements to build near mesh boundary. This hypothesis can be used by several 2D algorithms: - # NETGEN 2D, NETGEN 1D-2D, Quadrangle (mapping), MEFISTO, MG-CADSurf - # @param thickness total thickness of layers of quadrilaterals - # @param numberOfLayers number of layers - # @param stretchFactor factor (>1.0) of growth of layer thickness towards inside of mesh - # @param edges list of geometrical edges (or their ids). - # Viscous layers are either generated on these edges or not, depending on - # the value of \a isEdgesToIgnore parameter. - # @param isEdgesToIgnore if \c True, the Viscous layers are not generated on the - # edges specified by the previous parameter (\a edges). - # @ingroup l3_hypos_additi def ViscousLayers2D(self, thickness, numberOfLayers, stretchFactor, edges=[], isEdgesToIgnore=True ): + """ + Defines "ViscousLayers2D" hypothesis to give parameters of layers of quadrilateral + elements to build near mesh boundary. This hypothesis can be used by several 2D algorithms: + NETGEN 2D, NETGEN 1D-2D, Quadrangle (mapping), MEFISTO, MG-CADSurf + + Parameters: + thickness: total thickness of layers of quadrilaterals + numberOfLayers: number of layers + stretchFactor: factor (>1.0) of growth of layer thickness towards inside of mesh + edges: list of geometrical edges (or their ids). + Viscous layers are either generated on these edges or not, depending on + the value of **isEdgesToIgnore** parameter. + isEdgesToIgnore: if *True*, the Viscous layers are not generated on the + edges specified by the previous parameter (**edges**). + """ + if not isinstance(self.algo, SMESH._objref_SMESH_2D_Algo): raise TypeError, "ViscousLayers2D are supported by 2D algorithms only" if not "ViscousLayers2D" in self.GetCompatibleHypothesis(): @@ -345,10 +390,12 @@ class Mesh_Algorithm: self.mesh.AddHypothesis( hyp, self.geom ) return hyp - ## Transform a list of either edges or tuples (edge, 1st_vertex_of_edge) - # into a list acceptable to SetReversedEdges() of some 1D hypotheses - # @ingroup l3_hypos_1dhyps def ReversedEdgeIndices(self, reverseList): + """ + Transform a list of either edges or tuples (edge, 1st_vertex_of_edge) + into a list acceptable to SetReversedEdges() of some 1D hypotheses + """ + from salome.smesh.smeshBuilder import FirstVertexOnCurve resList = [] geompy = self.mesh.geompyD