From: cvw Date: Mon, 29 Apr 2013 11:24:24 +0000 (+0000) Subject: save load params X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=72e70c5f55f8f2407307ae30bc21d3d65486b105;p=modules%2Fsmesh.git save load params --- diff --git a/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py b/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py index cf868df9d..2c4ec2fd1 100644 --- a/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py +++ b/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py @@ -45,7 +45,7 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): # other solution could be in the same folder than this python module file: # iconfolder=os.path.dirname(os.path.abspath(__file__)) - iconfolder=os.environ['SMESH_ROOT_DIR']+'/share/salome/resources/smesh' + iconfolder=os.environ["SMESH_ROOT_DIR"]+"/share/salome/resources/smesh" #print "MGCleanerMonPlugDialog iconfolder",iconfolder icon = QIcon() icon.addFile(os.path.join(iconfolder,"select1.png")) @@ -55,7 +55,7 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): self.PB_ParamsFileExplorer.setIcon(icon) #Ces parametres ne sont pas remis à rien par le clean - self.paramsFile= os.path.abspath(os.path.join(os.environ['HOME'],'.MGCleaner.dat')) + self.paramsFile= os.path.abspath(os.path.join(os.environ["HOME"],".MGCleaner.dat")) self.LE_ParamsFile.setText(self.paramsFile) self.LE_MeshFile.setText("") self.LE_MeshSmesh.setText("") @@ -75,15 +75,15 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): self.connect(self.LE_MeshFile,SIGNAL("returnPressed()"),self.meshFileNameChanged) self.connect(self.LE_ParamsFile,SIGNAL("returnPressed()"),self.paramsFileNameChanged) - #QtCore.QObject.connect(self.checkBox, QtCore.SIGNAL('stateChanged(int)'), self.change) - self.connect(self.CB_FillHoles,SIGNAL("stateChanged(int)"),self.SP_minHoleSize.setEnabled) - self.connect(self.CB_computedToleranceDisplacement,SIGNAL("stateChanged(int)"),self.SP_toleranceDisplacement.setDisabled) - self.connect(self.CB_computedResolutionLength,SIGNAL("stateChanged(int)"),self.SP_resolutionLength.setDisabled) - self.connect(self.CB_computedOverlapDistance,SIGNAL("stateChanged(int)"),self.SP_overlapDistance.setDisabled) + #QtCore.QObject.connect(self.checkBox, QtCore.SIGNAL("stateChanged(int)"), self.change) + self.connect(self.CB_FillHoles,SIGNAL("stateChanged(int)"),self.SP_MinHoleSize.setEnabled) + self.connect(self.CB_ComputedToleranceDisplacement,SIGNAL("stateChanged(int)"),self.SP_ToleranceDisplacement.setDisabled) + self.connect(self.CB_ComputedResolutionLength,SIGNAL("stateChanged(int)"),self.SP_ResolutionLength.setDisabled) + self.connect(self.CB_ComputedOverlapDistance,SIGNAL("stateChanged(int)"),self.SP_OverlapDistance.setDisabled) def PBHelpPressed(self): try : - mydir=os.environ['SMESH_ROOT_DIR'] + mydir=os.environ["SMESH_ROOT_DIR"] except Exception: QMessageBox.warning( self, "Help unavailable $SMESH_ROOT_DIR not found") maDoc=mydir+"/share/doc/salome/gui/SMESH/MGCleaner/_downloads/mg-cleaner_user_manual.pdf" @@ -106,20 +106,20 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): maStudy=studyedit.getActiveStudy() smesh.SetCurrentStudy(maStudy) (outputMesh, status) = smesh.CreateMeshesFromGMF(self.fichierOut) - meshname = 'MGCleaner'+str(self.num) + meshname = "MGCleaner"+str(self.num) smesh.SetName(outputMesh.GetMesh(), meshname) outputMesh.Compute() self.editor = studyedit.getStudyEditor() # moduleEntry=self.editor.findOrCreateComponent("SMESH","SMESH") - HypReMeshEntry = self.editor.findOrCreateItem( moduleEntry, name = 'HypoForRemesh', - comment = 'HypoForRemeshing') + HypReMeshEntry = self.editor.findOrCreateItem( moduleEntry, name = "HypoForRemesh", + comment = "HypoForRemeshing") monStudyBuilder=maStudy.NewBuilder(); monStudyBuilder.NewCommand(); newStudyIter=monStudyBuilder.NewObject(HypReMeshEntry) aNameAttrib=monStudyBuilder.FindOrCreateAttribute(newStudyIter,"AttributeName") - hypoName = 'anHypo_MGCleaner_'+str(self.num) + hypoName = "anHypo_MGCleaner_"+str(self.num) aNameAttrib.SetValue(hypoName) aCommentAttrib=monStudyBuilder.FindOrCreateAttribute(newStudyIter,"AttributeComment") aCommentAttrib.SetValue(str(self.commande)) @@ -133,33 +133,37 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): def PBSavePressed(self,NomHypo=False): if NomHypo: - text = '# Params for Hypothese : anHypo_MGCleaner_'+str(self.num - 1)+"\n" + text = "# Params for Hypothese : anHypo_MGCleaner_"+str(self.num - 1)+"\n" else: - text = '# Save intermediate params \n' - text += "# Params for mesh : " + self.LE_MeshSmesh.text() +'\n' + text = "# Save intermediate params \n" + text += "# Params for mesh : " + self.LE_MeshSmesh.text() +"\n" + + if self.RB_Fix1.isChecked(): + CheckOrFix="fix1pass" + else: + if self.RB_Fix2.isChecked(): + CheckOrFix="fix2pass" + else: + CheckOrFix="check" + text+="CheckOrFix=" + CheckOrFix+"\n" - """ - for RB in self.GBOptim.findChildren(QRadioButton,): - if RB.isChecked()==True: - text+="Optimisation ='"+RB.text()+"'\n" - break - for RB in self.GBUnit.findChildren(QRadioButton,): - if RB.isChecked()==True: - text+="Units ='"+RB.text()+"'\n" - text+='Chordal_Tolerance_Deviation='+str(self.SP_Tolerance.value())+'\n' - text+='Ridge_Detection=' + str(self.CB_Ridge.isChecked())+'\n' - text+='Split_Edge=' + str(self.CB_SplitEdge.isChecked())+'\n' - text+='Point_Smoothing=' + str(self.CB_Point.isChecked())+'\n' - text+='Geometrical_Approximation='+ str(self.SP_Geomapp.value()) +'\n' - text+='Ridge_Angle=' + str(self.SP_Ridge.value()) +'\n' - text+='Maximum_Size=' + str(self.SP_MaxSize.value()) +'\n' - text+='Minimum_Size=' + str(self.SP_MaxSize.value()) +'\n' - text+='Mesh_Gradation=' + str(self.SP_Gradation.value())+'\n' - text+='Verbosity=' + str(self.SP_Verbosity.value())+'\n' - text+='\n\n' - """ + text+="PreserveTopology=" + str(self.CB_PreserveTopology.isChecked())+"\n" + text+="FillHoles=" + str(self.CB_FillHoles.isChecked())+"\n" + text+="MinHoleSize=" + str(self.SP_MinHoleSize.value())+"\n" + text+="ComputedToleranceDisplacement=" + str(self.CB_ComputedToleranceDisplacement.isChecked())+"\n" + text+="ToleranceDisplacement=" + str(self.SP_ToleranceDisplacement.value())+"\n" + text+="ComputedResolutionLength=" + str(self.CB_ComputedResolutionLength.isChecked())+"\n" + text+="ResolutionLength=" + str(self.SP_ResolutionLength.value())+"\n" + text+="FoldingAngle=" + str(self.SP_FoldingAngle.value())+"\n" + text+="RemeshPlanes=" + str(self.CB_RemeshPlanes.isChecked())+"\n" + text+="ComputedOverlapDistance=" + str(self.CB_ComputedOverlapDistance.isChecked())+"\n" + text+="OverlapDistance=" + str(self.SP_OverlapDistance.value())+"\n" + text+="OverlapAngle=" + str(self.SP_OverlapAngle.value())+"\n" + text+="Verbosity=" + str(self.SP_Verbosity.value())+"\n" + text+="\n\n" + try: - f=open(self.paramsFile,'a') + f=open(self.paramsFile,"a") except: QMessageBox.warning(self, "File", "Unable to open "+self.paramsFile) return @@ -172,7 +176,7 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): def PBLoadPressed(self): try: - f=open(self.paramsFile,'r') + f=open(self.paramsFile,"r") except : QMessageBox.warning(self, "File", "Unable to open "+self.paramsFile) return @@ -182,30 +186,38 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): QMessageBox.warning(self, "File", "Unable to read "+self.paramsFile) return f.close() - d={} - exec text in d - for RB in self.GBOptim.findChildren(QRadioButton,): - if d['Optimisation']== RB.text(): - RB.setChecked(True) - break - for RB in self.GBUnit.findChildren(QRadioButton,): - if d['Units']==RB.text(): - RB.setChecked(True) - break - self.SP_Tolerance.setValue(d['Chordal_Tolerance_Deviation']) - - self.CB_Ridge.setChecked(d['Ridge_Detection']) - self.CB_Point.setChecked(d['Point_Smoothing']) - self.CB_SplitEdge.setChecked(d['Split_Edge']) - self.SP_Geomapp.setValue(d['Geometrical_Approximation']) - self.SP_Ridge.setValue(d['Ridge_Angle']) - self.SP_MaxSize.setValue(d['Maximum_Size']) - self.SP_MinSize.setValue(d['Minimum_Size']) - self.SP_Gradation.setValue(d['Mesh_Gradation']) - - self.SP_Verbosity.setValue(d['Verbosity']) - self.SP_Memory.setValue(d['Memory']) - + + self.clean() + for slig in reversed(text.split("\n")): + lig=slig.strip() + #print "load params",self.paramsFile,lig + if lig=="": continue #skip blanck lines + if lig[0]=="#": break + try: + tit,value=lig.split("=") + if tit=="CheckOrFix": + self.RB_Fix1.setChecked(False) + self.RB_Fix2.setChecked(False) + self.RB_Check.setChecked(False) + if value=="fix1pass": self.RB_Fix1.setChecked(True) + if value=="fix2pass": self.RB_Fix2.setChecked(True) + if value=="check": self.RB_Check.setChecked(True) + if tit=="PreserveTopology": self.CB_PreserveTopology.setChecked(bool(value)) + if tit=="FillHoles": self.CB_FillHoles.setChecked(bool(value)) + if tit=="MinHoleSize": self.SP_MinHoleSize.setProperty("value", float(value)) + if tit=="ComputedToleranceDisplacement": self.CB_ComputedToleranceDisplacement.setChecked(bool(value)) + if tit=="ToleranceDisplacement": self.SP_ToleranceDisplacement.setProperty("value", float(value)) + if tit=="ComputedResolutionLength": self.CB_ComputedResolutionLength.setChecked(bool(value)) + if tit=="ResolutionLength": self.SP_ResolutionLength.setProperty("value", float(value)) + if tit=="FoldingAngle": self.SP_FoldingAngle.setProperty("value", float(value)) + if tit=="RemeshPlanes": self.CB_RemeshPlanes.setChecked(bool(value)) + if tit=="ComputedOverlapDistance": self.CB_ComputedOverlapDistance.setChecked(bool(value)) + if tit=="OverlapDistance": self.SP_OverlapDistance.setProperty("value", float(value)) + if tit=="OverlapAngle": self.SP_OverlapAngle.setProperty("value", float(value)) + if tit=="Verbosity": self.SP_Verbosity.setProperty("value", int(float(value))) + except: + QMessageBox.warning(self, "File", "Problem to read '"+lig+"'") + def PBCancelPressed(self): self.close() @@ -303,17 +315,17 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): else: self.commande+=" --topology ignore" if self.CB_FillHoles.isChecked(): #no fill holes default - self.commande+=" --min_hole_size " + str(self.SP_minHoleSize.value()) - if not self.CB_computedToleranceDisplacement.isChecked(): #computed default - self.commande+=" --tolerance_displacement " + str(self.SP_toleranceDisplacement.value()) - if not self.CB_computedResolutionLength.isChecked(): #computed default - self.commande+=" --tolerance_displacement " + str(self.SP_resolutionLength.value()) - self.commande+=" --folding_angle " + str(self.SP_foldingAngle.value()) + self.commande+=" --min_hole_size " + str(self.SP_MinHoleSize.value()) + if not self.CB_ComputedToleranceDisplacement.isChecked(): #computed default + self.commande+=" --tolerance_displacement " + str(self.SP_ToleranceDisplacement.value()) + if not self.CB_ComputedResolutionLength.isChecked(): #computed default + self.commande+=" --tolerance_displacement " + str(self.SP_ResolutionLength.value()) + self.commande+=" --folding_angle " + str(self.SP_FoldingAngle.value()) if self.CB_RemeshPlanes.isChecked(): #no remesh default self.commande+=" --remesh_planes" - if not self.CB_computedOverlapDistance.isChecked(): #computed default - self.commande+=" --overlap_distance " + str(self.SP_overlapDistance.value()) - self.commande+=" --overlap_angle " + str(self.SP_overlapAngle.value()) + if not self.CB_ComputedOverlapDistance.isChecked(): #computed default + self.commande+=" --overlap_distance " + str(self.SP_OverlapDistance.value()) + self.commande+=" --overlap_angle " + str(self.SP_OverlapAngle.value()) return True def clean(self): @@ -324,17 +336,17 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): self.CB_FillHoles.setChecked(False) self.CB_RemeshPlanes.setChecked(False) - self.SP_minHoleSize.setProperty("value", 0) - self.SP_toleranceDisplacement.setProperty("value", 0) - self.SP_resolutionLength.setProperty("value", 0) - self.SP_foldingAngle.setProperty("value", 15) - self.SP_overlapDistance.setProperty("value", 0) - self.SP_overlapAngle.setProperty("value", 15) + self.SP_MinHoleSize.setProperty("value", 0) + self.SP_ToleranceDisplacement.setProperty("value", 0) + self.SP_ResolutionLength.setProperty("value", 0) + self.SP_FoldingAngle.setProperty("value", 15) + self.SP_OverlapDistance.setProperty("value", 0) + self.SP_OverlapAngle.setProperty("value", 15) self.SP_Verbosity.setProperty("value", 3) - self.CB_computedToleranceDisplacement.setChecked(True) - self.CB_computedResolutionLength.setChecked(True) - self.CB_computedOverlapDistance.setChecked(True) + self.CB_ComputedToleranceDisplacement.setChecked(True) + self.CB_ComputedResolutionLength.setChecked(True) + self.CB_ComputedOverlapDistance.setChecked(True) __dialog=None def getDialog(): @@ -356,7 +368,7 @@ def getDialog(): # ============================================================================== # def TEST_MGCleanerMonPlugDialog(): - print 'TEST_MGCleanerMonPlugDialog' + print "TEST_MGCleanerMonPlugDialog" import sys from PyQt4.QtGui import QApplication from PyQt4.QtCore import QObject, SIGNAL, SLOT diff --git a/src/Tools/MGCleanerPlug/MGCleanerMonViewText.py b/src/Tools/MGCleanerPlug/MGCleanerMonViewText.py index ff46f1ffa..ac4feea92 100644 --- a/src/Tools/MGCleanerPlug/MGCleanerMonViewText.py +++ b/src/Tools/MGCleanerPlug/MGCleanerMonViewText.py @@ -1,4 +1,4 @@ -# -*- coding: iso-8859-1 -*- +# -*- coding: utf-8 -*- # Copyright (C) 2007-2013 EDF R&D # # This library is free software; you can redistribute it and/or @@ -40,6 +40,8 @@ class MGCleanerMonViewText(Ui_ViewExe,QDialog): self.resize( QSize(1000,600).expandedTo(self.minimumSizeHint()) ) self.connect( self.PB_Ok,SIGNAL("clicked()"), self, SLOT("close()") ) self.connect( self.PB_Save,SIGNAL("clicked()"), self.saveFile ) + self.PB_Save.setToolTip("Save trace in log file") + self.PB_Ok.setToolTip("Close view") self.monExe=QProcess(self) diff --git a/src/Tools/MGCleanerPlug/MGCleanerPlugDialog.ui b/src/Tools/MGCleanerPlug/MGCleanerPlugDialog.ui index 9ce66a597..a6513fabb 100644 --- a/src/Tools/MGCleanerPlug/MGCleanerPlugDialog.ui +++ b/src/Tools/MGCleanerPlug/MGCleanerPlugDialog.ui @@ -426,7 +426,7 @@ Default is not to mesh planes. You can control #1 - + 20 @@ -469,7 +469,7 @@ Set 'Fill holes' in 'Simple Remeshing Options'. #2 - + 20 @@ -514,7 +514,7 @@ Unused in collision resolution . - + 650 @@ -535,7 +535,7 @@ Unused in collision resolution . #3 - + 20 @@ -578,7 +578,7 @@ Default is computed from model. Distance threshold for two points distinct (--resolution_length) - + 650 @@ -598,7 +598,7 @@ Default is computed from model. #4 - + 20 @@ -640,7 +640,7 @@ Default is 15 degrees. #5 - + 20 @@ -684,7 +684,7 @@ Default is computed from model. (--overlap_distance) - + 650 @@ -704,7 +704,7 @@ Default is computed from model. #6 - + 20