From: azv Date: Wed, 15 Nov 2017 10:15:59 +0000 (+0300) Subject: Task 2.1. Management of result names X-Git-Tag: V_2.10.0RC~155^2~5 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=4f54ae9351159addc59c7ac74f2859555a4a86f9;p=modules%2Fshaper.git Task 2.1. Management of result names Adjust test.models/ cases according to the new naming conception. --- diff --git a/test.models/CSWA.py b/test.models/CSWA.py index a7dc18133..cc859057d 100644 --- a/test.models/CSWA.py +++ b/test.models/CSWA.py @@ -102,6 +102,7 @@ SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16") SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], "50/2") model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4")) SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4")) SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4")) @@ -127,6 +128,7 @@ SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchArc_3.results()[1] SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24") model.do() ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_3_2f-SketchLine_12f-SketchArc_5_2r")], model.selection(), 5, 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1") Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face_1")) SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionFuse_1_1/Modfied_5&ExtrusionFuse_1_1/Modfied_4&ExtrusionFuse_1_1/To_Face_1")) SketchCircle_2 = Sketch_4.addCircle(-15, 35.00000000000001, 5) @@ -135,6 +137,7 @@ SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25") SketchConstraintRadius_4 = Sketch_4.setRadius(SketchCircle_2.results()[1], "10/2") model.do() ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_2_2f")], model.selection(), 8, 0, [model.selection("SOLID", "ExtrusionFuse_1_1")]) +ExtrusionFuse_2.result().setName("ExtrusionFuse_2_1") Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1")) SketchArc_6 = Sketch_5.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&ExtrusionFuse_1_1/Modfied_3")) SketchArc_7 = Sketch_5.addArc(-45, 35, -45, 5, -25.41666666666737, 12.27351642784166, False) @@ -164,6 +167,7 @@ SketchConstraintCoincidence_33 = Sketch_5.setCoincident(SketchArc_9.startPoint() SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_34") model.do() ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchLine_13r-SketchArc_9_2r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")]) +ExtrusionFuse_3.result().setName("ExtrusionFuse_3_1") Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modfied_3")) SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_5")) SketchArc_10 = Sketch_6.addArc(55, 35, 55, 15, 35, 35, True) @@ -194,6 +198,7 @@ SketchConstraintCoincidence_41 = Sketch_6.setCoincident(SketchLine_14.endPoint() SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42") model.do() ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_10_2f-SketchLine_16r-SketchLine_18f-SketchLine_19r")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")]) +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_4")) SketchCircle_4 = Sketch_7.addCircle(45, 35, 5) SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_1&ExtrusionCut_2_1/Modfied_4")) @@ -209,6 +214,7 @@ SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_44") SketchConstraintHorizontal_4 = Sketch_7.setHorizontal(SketchLine_21.result()) model.do() ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3.result().setName("ExtrusionCut_3_1") Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8")) SketchLine_22 = Sketch_8.addLine(55, 25, 5.000000000000002, 25) SketchLine_23 = Sketch_8.addLine(5.000000000000002, 25, 5.000000000000002, 13) @@ -237,6 +243,7 @@ SketchConstraintCoincidence_49 = Sketch_8.setCoincident(SketchLine_22.startPoint SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50") model.do() ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_4.result().setName("ExtrusionCut_4_1") Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modfied_2")) SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320836, -63) SketchLine_29 = Sketch_9.addLine(model.selection("EDGE", "ExtrusionFuse_1_1/Modfied_2&ExtrusionCut_4_1/Modfied_6")) @@ -259,6 +266,7 @@ SketchConstraintCoincidence_55 = Sketch_9.setCoincident(SketchLine_28.startPoint SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_56") model.do() ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_28f-SketchLine_31f-SketchLine_32f")], model.selection(), model.selection(), 0, model.selection("FACE", "ExtrusionCut_4_1/Modfied_3"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) +ExtrusionCut_5.result().setName("ExtrusionCut_5_1") Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1")) SketchCircle_5 = Sketch_10.addCircle(-6.000000000000002, 4.999999999999997, 5) SketchLine_33 = Sketch_10.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_5_1/Modfied_1")) @@ -268,6 +276,7 @@ SketchConstraintDistance_12 = Sketch_10.setDistance(SketchCircle_5.result(), Ske SketchConstraintRadius_7 = Sketch_10.setRadius(SketchCircle_5.results()[1], "10/2") model.do() ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchCircle_5_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), 0, [model.selection("SOLID", "ExtrusionCut_5_1")]) +ExtrusionCut_6.result().setName("ExtrusionCut_6_1") model.do() # Test reexecution after parameter change diff --git a/test.models/angle30.py b/test.models/angle30.py index 08f4d7b42..8554711c9 100644 --- a/test.models/angle30.py +++ b/test.models/angle30.py @@ -141,6 +141,7 @@ model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 75, 45) Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22) Boolean_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")]) +Boolean_1.result().setName("Boolean_1_1") Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY")) SketchLine_20 = Sketch_4.addLine(-4, 38.00000000000001, -4, 21.26617031813674) SketchLine_20.setName("SketchLine_36") @@ -353,9 +354,11 @@ model.do() Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 50, 30) Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22) Boolean_2 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "Extrusion_4_1")]) +Boolean_2.result().setName("Boolean_2_1") Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22) Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 75, 40) Boolean_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")]) +Boolean_3.result().setName("Boolean_3_1") Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) SketchLine_38 = Sketch_5.addLine(44, 3.464101615137769, 17.52573586555855, 49.31887218898888) SketchLine_38.setName("SketchLine_41") @@ -489,8 +492,11 @@ SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_94") model.do() Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_55r-SketchLine_44r-SketchLine_52r-SketchLine_53r-SketchLine_54r-SketchLine_47r-SketchLine_48r-SketchLine_49r-SketchArc_12_2r-SketchArc_13_2r")], model.selection(), 0, 40) Boolean_4 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Boolean_2_1")]) +Boolean_4.result().setName("Boolean_4_1") Boolean_5 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Extrusion_7_1")]) +Boolean_5.result().setName("Boolean_5_1") Boolean_6 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_5_1")], [model.selection("SOLID", "Boolean_3_1")]) +Boolean_6.result().setName("Boolean_6_1") Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55) Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_7")) SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60) @@ -762,6 +768,7 @@ SketchConstraintDistance_44.setName("SketchConstraintDistance_45") model.do() ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")]) Boolean_7 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_6_1")], [model.selection("SOLID", "ExtrusionCut_2_1")]) +Boolean_7.result().setName("Boolean_7_1") model.do() # Test reexecution after parameter change diff --git a/test.models/bearing_puller.py b/test.models/bearing_puller.py index 406f788e2..f5f3a09f5 100644 --- a/test.models/bearing_puller.py +++ b/test.models/bearing_puller.py @@ -29,6 +29,7 @@ model.addParameter(partSet, "Rod", "12") model.addParameter(partSet, "Thickness", "25") Part_1 = model.addPart(partSet) Part_1.setName("Body") +Part_1.result().setName("Part_1") Part_1_doc = Part_1.document() model.addParameter(Part_1_doc, "Radius", "50", "Radius of the body") model.addParameter(Part_1_doc, "Width", "25", "Width of body arms") @@ -229,7 +230,9 @@ SketchConstraintDistance_9.setName("SketchConstraintDistance_8") model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_10r-SketchLine_11r-SketchArc_3_2f-SketchArc_4_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12r-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face_2"), 10) Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5")]) +Boolean_1.result().setName("Boolean_1_1") Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_6")]) +Boolean_2.result().setName("Boolean_2_1") Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Boolean_2_1/Modified_7"), model.selection("FACE", "Boolean_2_1/Modified_9")) Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchCircle_3 = Sketch_3.addCircle(25, -10, 4) @@ -254,15 +257,23 @@ SketchConstraintDistance_13.setName("SketchConstraintDistance_12") model.do() Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_3/Wire-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Boolean_1_1/Modified_6"), 5, model.selection("FACE", "Boolean_1_1/Modified_8"), 5) Boolean_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_2_1")], [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")]) +Boolean_3.result().setName("Boolean_3_1") Recover_1 = model.addRecover(Part_1_doc, Boolean_3, [Extrusion_2.results()[1], Extrusion_2.result()]) Rotation_1 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_1_1"), model.selection("SOLID", "Recover_1_2")], model.selection("EDGE", "PartSet/OZ"), 120) +Rotation_1.result().setName("Rotation_1_1") +Rotation_1.results()[1].setName("Rotation_1_2") Boolean_4 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_3_1")], [model.selection("SOLID", "Rotation_1_1"), model.selection("SOLID", "Rotation_1_2")]) +Boolean_4.result().setName("Boolean_4_1") Recover_2 = model.addRecover(Part_1_doc, Boolean_4, [Rotation_1.results()[1], Rotation_1.result()]) Rotation_2 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_2_1"), model.selection("SOLID", "Recover_2_2")], model.selection("EDGE", "PartSet/OZ"), 120) +Rotation_2.result().setName("Rotation_2_1") +Rotation_2.results()[1].setName("Rotation_2_2") Boolean_5 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Rotation_2_2"), model.selection("SOLID", "Rotation_2_1")]) +Boolean_5.result().setName("Boolean_5_1") model.do() Part_2 = model.addPart(partSet) Part_2.setName("Arm 1") +Part_2.result().setName("Part_2") Part_2_doc = Part_2.document() model.addParameter(Part_2_doc, "a", "7.5") model.addParameter(Part_2_doc, "b", "12.5") @@ -497,24 +508,32 @@ model.do() Face_1 = model.addFace(Part_2_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchArc_4_2f-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f-SketchArc_9_2f-SketchArc_10_2f")]) Axis_4 = model.addAxis(Part_2_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3-SketchLine_20s")) Rotation_3 = model.addRotation(Part_2_doc, [model.selection("FACE", "Face_1_1")], model.selection("EDGE", "Axis_1"), -43.8752) +Rotation_3.result().setName("Rotation_1_1") Pipe_1 = model.addPipe(Part_2_doc, [model.selection("FACE", "Rotation_1_1")], model.selection("EDGE", "Sketch_2/Edge-SketchArc_3_2")) +Pipe_1.result().setName("Pipe_1_1") Extrusion_3 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchLine_15r-SketchLine_16r-SketchLine_17r")], model.selection(), "Gap/2", "Gap/2") Boolean_6 = model.addFuse(Part_2_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")]) +Boolean_6.result().setName("Boolean_1_1") Extrusion_4 = model.addExtrusion(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), "Gap", "Gap") Boolean_7 = model.addCut(Part_2_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")]) +Boolean_7.result().setName("Boolean_2_1") Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Boolean_2_1")], model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3_2s"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e")) +Translation_1.result().setName("Translation_1_1") model.do() Part_3 = model.duplicatePart(Part_2) Part_3.setName("Arm 2") +Part_3.result().setName("Part_3") model.do() Part_4 = model.duplicatePart(Part_3) Part_4.setName("Arm 3") +Part_4.result().setName("Part_4") model.do() Translation_4 = model.addTranslation(partSet, [model.selection("COMPOUND", "Part_2/"), model.selection("COMPOUND", "Part_3/"), model.selection("COMPOUND", "Part_4/")], model.selection("EDGE", "OX"), -40) Rotation_6 = model.addRotation(partSet, [model.selection("COMPOUND", "Translation_1_2/")], model.selection("EDGE", "OZ"), 120) Rotation_7 = model.addRotation(partSet, [model.selection("COMPOUND", "Translation_1_3/")], model.selection("EDGE", "OZ"), 240) Part_5 = model.addPart(partSet) Part_5.setName("Rod part") +Part_5.result().setName("Part_5") Part_5_doc = Part_5.document() Parameter_H = model.addParameter(partSet, "H", "110") Sketch_10 = model.addSketch(Part_5_doc, model.defaultPlane("YOZ")) @@ -598,7 +617,9 @@ SketchConstraintDistance_37 = Sketch_12.setDistance(SketchLine_108.startPoint(), model.do() Revolution_3 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_14f-SketchLine_15f-SketchLine_16f")], model.selection("EDGE", "PartSet/OZ"), 360, 0) Boolean_12 = model.addCut(Part_5_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")]) +Boolean_12.result().setName("Boolean_1_1") Boolean_13 = model.addFuse(Part_5_doc, [model.selection("SOLID", "Boolean_1_1"), model.selection("SOLID", "Revolution_1_1")], []) +Boolean_13.result().setName("Boolean_2_1") # Test reexecution after parameter change Parameter_H.setValue(120) diff --git a/test.models/bobine_film_reel.py b/test.models/bobine_film_reel.py index 846b051b3..5db7d85c2 100644 --- a/test.models/bobine_film_reel.py +++ b/test.models/bobine_film_reel.py @@ -79,6 +79,7 @@ SketchConstraintCoincidence_8 = Sketch_5.setCoincident(SketchAPI_Line(SketchLine SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_16") Extrusion_5.setNestedSketch(Sketch_5) Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1"), model.selection("SOLID", "Extrusion_5_1"), model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_3_1")], []) +Boolean_1.result().setName("Boolean_1_1") ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection("FACE", "Extrusion_5_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "Boolean_1_1")]) Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/From_Face_1")) SketchCircle_6 = Sketch_6.addCircle(0, 0, 4.2) @@ -87,6 +88,7 @@ SketchPoint_2 = Sketch_6.addPoint(model.selection("VERTEX", "PartSet/Origin")) SketchConstraintCoincidence_9 = Sketch_6.setCoincident(SketchPoint_2.coordinates(), SketchCircle_6.center()) SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_17") ExtrusionCut_1.setNestedSketch(Sketch_6) +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1")) SketchCircle_7 = Sketch_7.addCircle(0, -85, 66) SketchLine_6 = Sketch_7.addLine(model.selection("EDGE", "PartSet/OY")) @@ -97,6 +99,7 @@ SketchMultiRotation_1 = Sketch_7.addRotation([SketchCircle_7.results()[1]], Sket [SketchCircle_8, SketchCircle_9] = SketchMultiRotation_1.rotated() model.do() ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_22")) SketchLine_7 = Sketch_8.addLine(-2.320957096353877e-016, 11.00000001704673, -7, 11.00000001704673) SketchConstraintHorizontal_1 = Sketch_8.setHorizontal(SketchLine_7.result()) diff --git a/test.models/bracket32.py b/test.models/bracket32.py index 42dcf26c4..3690c9d3b 100644 --- a/test.models/bracket32.py +++ b/test.models/bracket32.py @@ -411,8 +411,11 @@ SketchConstraintRadius_10.setName("SketchConstraintRadius_4") model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "TL/2-3", "TL/2-3") ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 100, 100, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), "TL/2", "TL/2", [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 60, 60, [model.selection("SOLID", "ExtrusionFuse_1_1")]) +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) SketchCircle_5 = Sketch_5.addCircle(30, -41, 7.5) SketchLine_37 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OX")) @@ -539,6 +542,7 @@ SketchConstraintRadius_13 = Sketch_7.setRadius(SketchArc_7.results()[1], "BHPFR" SketchConstraintRadius_13.setName("SketchConstraintRadius_8") model.do() RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "Sketch_7/Edge-SketchLine_41"), 360, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +RevolutionFuse_1.result().setName("RevolutionFuse_1_1") Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchLine_49 = Sketch_8.addLine(32, 6, 32.50001476412091, 6.000000000000001) SketchLine_49.setName("SketchLine_55") @@ -635,6 +639,7 @@ SketchConstraintRadius_14 = Sketch_8.setRadius(SketchArc_8.results()[1], 1.5) SketchConstraintRadius_14.setName("SketchConstraintRadius_9") model.do() RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_55r-SketchLine_49f-SketchLine_50f-SketchLine_56r-SketchLine_52f-SketchLine_53f-SketchArc_7_2r")], model.selection("EDGE", "Sketch_8/Edge-SketchLine_50"), 360, 0, [model.selection("SOLID", "RevolutionFuse_1_1")]) +RevolutionFuse_2.result().setName("RevolutionFuse_2_1") Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, True) Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2")) SketchLine_57 = Sketch_9.addLine(-32.50001494742042, 5.999999999999998, -32, 6) @@ -827,7 +832,9 @@ SketchConstraintRadius_16 = Sketch_10.setRadius(SketchArc_10.results()[1], 1.5) SketchConstraintRadius_16.setName("SketchConstraintRadius_11") model.do() RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_58"), 360, 0, [model.selection("SOLID", "RevolutionFuse_2_1")]) +RevolutionFuse_3.result().setName("RevolutionFuse_3_1") RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_10")], model.selection("EDGE", "Sketch_10/Edge-SketchLine_66"), 360, 0, [model.selection("SOLID", "RevolutionFuse_3_1")]) +RevolutionFuse_4.result().setName("RevolutionFuse_4_1") ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchCircle_10_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_12_2f")], model.selection("EDGE", "PartSet/OZ"), "BPS+5", 5, [model.selection("SOLID", "RevolutionFuse_4_1")]) # Test reexecution after parameter change diff --git a/test.models/bushing.py b/test.models/bushing.py index 2cf0f7929..fa5803232 100644 --- a/test.models/bushing.py +++ b/test.models/bushing.py @@ -584,7 +584,9 @@ SketchConstraintDistance_13 = Sketch_3.setDistance(SketchCircle_4.center(), Sket model.do() Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_8f-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f")], model.selection("EDGE", "PartSet/OX"), 360, 0) ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_1_2r-SketchLine_382f-SketchLine_383f-SketchLine_20f-SketchArc_2_2r-SketchLine_21f-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f-SketchLine_30f-SketchLine_31f-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f-SketchLine_36f-SketchLine_37f-SketchLine_38f-SketchLine_39f-SketchLine_40f-SketchLine_41f-SketchLine_42f-SketchLine_43f-SketchLine_44f-SketchLine_45f-SketchLine_46f-SketchLine_47f-SketchLine_48f-SketchLine_49f-SketchLine_50f-SketchLine_51f-SketchLine_52f-SketchLine_53f-SketchLine_54f-SketchLine_55f-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchLine_59f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchLine_65f-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_69f-SketchLine_70f-SketchLine_71f-SketchLine_72f-SketchLine_73f-SketchLine_74f-SketchLine_75f-SketchLine_76f-SketchLine_77f-SketchLine_78f-SketchLine_79f-SketchLine_80f-SketchLine_81f-SketchLine_82f-SketchLine_83f-SketchLine_84f-SketchLine_85f-SketchLine_86f-SketchLine_87f-SketchLine_88f-SketchLine_89f-SketchLine_90f-SketchLine_91f-SketchLine_92f-SketchLine_93f-SketchLine_94f-SketchLine_95f-SketchLine_96f-SketchLine_97f-SketchLine_98f-SketchLine_99f-SketchLine_100f-SketchLine_101f-SketchLine_102f-SketchLine_103f-SketchLine_104f-SketchLine_105f-SketchLine_106f-SketchLine_107f-SketchLine_108f-SketchLine_109f-SketchLine_110f-SketchLine_111f-SketchLine_112f-SketchLine_113f-SketchLine_114f-SketchLine_115f-SketchLine_116f-SketchLine_117f-SketchLine_118f-SketchLine_119f-SketchLine_120f-SketchLine_121f-SketchLine_122f-SketchLine_123f-SketchLine_124f-SketchLine_125f-SketchLine_126f-SketchLine_127f-SketchLine_128f-SketchLine_129f-SketchLine_130f-SketchLine_131f-SketchLine_132f-SketchLine_133f-SketchLine_134f-SketchLine_135f-SketchLine_136f-SketchLine_137f-SketchLine_138f-SketchLine_139f-SketchLine_140f-SketchLine_141f-SketchLine_142f-SketchLine_143f-SketchLine_144f-SketchLine_145f-SketchLine_146f-SketchLine_147f-SketchLine_148f-SketchLine_149f-SketchLine_150f-SketchLine_151f-SketchLine_152f-SketchLine_153f-SketchLine_154f-SketchLine_155f-SketchLine_156f-SketchLine_157f-SketchLine_158f-SketchLine_159f-SketchLine_160f-SketchLine_161f-SketchLine_162f-SketchLine_163f-SketchLine_164f-SketchLine_165f-SketchLine_166f-SketchLine_167f-SketchLine_168f-SketchLine_169f-SketchLine_170f-SketchLine_171f-SketchLine_172f-SketchLine_173f-SketchLine_174f-SketchLine_175f-SketchLine_176f-SketchLine_177f-SketchLine_178f-SketchLine_179f-SketchLine_180f-SketchLine_181f-SketchLine_182f-SketchLine_183f-SketchLine_184f-SketchLine_185f-SketchLine_186f-SketchLine_187f-SketchLine_188f-SketchLine_189f-SketchLine_190f-SketchLine_191f-SketchLine_192f-SketchLine_193f-SketchLine_194f-SketchLine_195f-SketchLine_196f-SketchLine_197f-SketchLine_198f-SketchLine_199f-SketchArc_3_2r-SketchArc_4_2r-SketchArc_5_2r-SketchArc_6_2r-SketchArc_7_2r-SketchArc_8_2r-SketchArc_9_2r-SketchArc_10_2r-SketchArc_11_2r-SketchArc_12_2r-SketchArc_13_2r-SketchArc_14_2r-SketchArc_15_2r-SketchArc_16_2r-SketchArc_17_2r-SketchArc_18_2r-SketchArc_19_2r-SketchArc_20_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_23_2r-SketchArc_24_2r-SketchArc_25_2r-SketchArc_26_2r-SketchArc_27_2r-SketchArc_28_2r-SketchArc_29_2r-SketchArc_30_2r-SketchArc_31_2r-SketchArc_32_2r-SketchArc_33_2r-SketchArc_34_2r-SketchArc_35_2r-SketchArc_36_2r-SketchArc_37_2r-SketchArc_38_2r-SketchArc_39_2r-SketchArc_40_2r-SketchArc_41_2r-SketchArc_42_2r-SketchArc_43_2r-SketchArc_44_2r-SketchArc_45_2r-SketchArc_46_2r-SketchArc_47_2r-SketchArc_48_2r-SketchArc_49_2r-SketchArc_50_2r-SketchArc_51_2r-SketchArc_52_2r-SketchArc_53_2r-SketchArc_54_2r-SketchArc_55_2r-SketchArc_56_2r-SketchArc_57_2r-SketchArc_58_2r-SketchArc_59_2r-SketchArc_60_2r-SketchArc_61_2r-SketchArc_62_2r-SketchArc_63_2r-SketchArc_64_2r-SketchArc_65_2r-SketchArc_66_2r-SketchArc_67_2r-SketchArc_68_2r-SketchArc_69_2r-SketchArc_70_2r-SketchArc_71_2r-SketchArc_72_2r-SketchArc_73_2r-SketchArc_74_2r-SketchArc_75_2r-SketchArc_76_2r-SketchArc_77_2r-SketchArc_78_2r-SketchArc_79_2r-SketchArc_80_2r-SketchArc_81_2r-SketchArc_82_2r-SketchArc_83_2r-SketchArc_84_2r-SketchArc_85_2r-SketchArc_86_2r-SketchArc_87_2r-SketchArc_88_2r-SketchArc_89_2r-SketchArc_90_2r-SketchArc_91_2r-SketchArc_92_2r-SketchArc_93_2r-SketchArc_94_2r-SketchArc_95_2r-SketchArc_96_2r-SketchArc_97_2r-SketchArc_98_2r-SketchArc_99_2r-SketchArc_100_2r-SketchArc_101_2r-SketchArc_102_2r-SketchArc_103_2r-SketchArc_104_2r-SketchArc_105_2r-SketchArc_106_2r-SketchArc_107_2r-SketchArc_108_2r-SketchArc_109_2r-SketchArc_110_2r-SketchArc_111_2r-SketchArc_112_2r-SketchArc_113_2r-SketchArc_114_2r-SketchArc_115_2r-SketchArc_116_2r-SketchArc_117_2r-SketchArc_118_2r-SketchArc_119_2r-SketchArc_120_2r-SketchArc_121_2r-SketchArc_122_2r-SketchArc_123_2r-SketchArc_124_2r-SketchArc_125_2r-SketchArc_126_2r-SketchArc_127_2r-SketchArc_128_2r-SketchArc_129_2r-SketchArc_130_2r-SketchArc_131_2r-SketchArc_132_2r-SketchArc_133_2r-SketchArc_134_2r-SketchArc_135_2r-SketchArc_136_2r-SketchArc_137_2r-SketchArc_138_2r-SketchArc_139_2r-SketchArc_140_2r-SketchArc_141_2r-SketchArc_142_2r-SketchArc_143_2r-SketchArc_144_2r-SketchArc_145_2r-SketchArc_146_2r-SketchArc_147_2r-SketchArc_148_2r-SketchArc_149_2r-SketchArc_150_2r-SketchArc_151_2r-SketchArc_152_2r-SketchArc_153_2r-SketchArc_154_2r-SketchArc_155_2r-SketchArc_156_2r-SketchArc_157_2r-SketchArc_158_2r-SketchArc_159_2r-SketchArc_160_2r-SketchArc_161_2r-SketchArc_162_2r-SketchArc_163_2r-SketchArc_164_2r-SketchArc_165_2r-SketchArc_166_2r-SketchArc_167_2r-SketchArc_168_2r-SketchArc_169_2r-SketchArc_170_2r-SketchArc_171_2r-SketchArc_172_2r-SketchArc_173_2r-SketchArc_174_2r-SketchArc_175_2r-SketchArc_176_2r-SketchArc_177_2r-SketchArc_178_2r-SketchArc_179_2r-SketchArc_180_2r-SketchLine_200f-SketchLine_201f-SketchLine_202f-SketchLine_203f-SketchLine_204f-SketchLine_205f-SketchLine_206f-SketchLine_207f-SketchLine_208f-SketchLine_209f-SketchLine_210f-SketchLine_211f-SketchLine_212f-SketchLine_213f-SketchLine_214f-SketchLine_215f-SketchLine_216f-SketchLine_217f-SketchLine_218f-SketchLine_219f-SketchLine_220f-SketchLine_221f-SketchLine_222f-SketchLine_223f-SketchLine_224f-SketchLine_225f-SketchLine_226f-SketchLine_227f-SketchLine_228f-SketchLine_229f-SketchLine_230f-SketchLine_231f-SketchLine_232f-SketchLine_233f-SketchLine_234f-SketchLine_235f-SketchLine_236f-SketchLine_237f-SketchLine_238f-SketchLine_239f-SketchLine_240f-SketchLine_241f-SketchLine_242f-SketchLine_243f-SketchLine_244f-SketchLine_245f-SketchLine_246f-SketchLine_247f-SketchLine_248f-SketchLine_249f-SketchLine_250f-SketchLine_251f-SketchLine_252f-SketchLine_253f-SketchLine_254f-SketchLine_255f-SketchLine_256f-SketchLine_257f-SketchLine_258f-SketchLine_259f-SketchLine_260f-SketchLine_261f-SketchLine_262f-SketchLine_263f-SketchLine_264f-SketchLine_265f-SketchLine_266f-SketchLine_267f-SketchLine_268f-SketchLine_269f-SketchLine_270f-SketchLine_271f-SketchLine_272f-SketchLine_273f-SketchLine_274f-SketchLine_275f-SketchLine_276f-SketchLine_277f-SketchLine_278f-SketchLine_279f-SketchLine_280f-SketchLine_281f-SketchLine_282f-SketchLine_283f-SketchLine_284f-SketchLine_285f-SketchLine_286f-SketchLine_287f-SketchLine_288f-SketchLine_289f-SketchLine_290f-SketchLine_291f-SketchLine_292f-SketchLine_293f-SketchLine_294f-SketchLine_295f-SketchLine_296f-SketchLine_297f-SketchLine_298f-SketchLine_299f-SketchLine_300f-SketchLine_301f-SketchLine_302f-SketchLine_303f-SketchLine_304f-SketchLine_305f-SketchLine_306f-SketchLine_307f-SketchLine_308f-SketchLine_309f-SketchLine_310f-SketchLine_311f-SketchLine_312f-SketchLine_313f-SketchLine_314f-SketchLine_315f-SketchLine_316f-SketchLine_317f-SketchLine_318f-SketchLine_319f-SketchLine_320f-SketchLine_321f-SketchLine_322f-SketchLine_323f-SketchLine_324f-SketchLine_325f-SketchLine_326f-SketchLine_327f-SketchLine_328f-SketchLine_329f-SketchLine_330f-SketchLine_331f-SketchLine_332f-SketchLine_333f-SketchLine_334f-SketchLine_335f-SketchLine_336f-SketchLine_337f-SketchLine_338f-SketchLine_339f-SketchLine_340f-SketchLine_341f-SketchLine_342f-SketchLine_343f-SketchLine_344f-SketchLine_345f-SketchLine_346f-SketchLine_347f-SketchLine_348f-SketchLine_349f-SketchLine_350f-SketchLine_351f-SketchLine_352f-SketchLine_353f-SketchLine_354f-SketchLine_355f-SketchLine_356f-SketchLine_357f-SketchLine_358f-SketchLine_359f-SketchLine_360f-SketchLine_361f-SketchLine_362f-SketchLine_363f-SketchLine_364f-SketchLine_365f-SketchLine_366f-SketchLine_367f-SketchLine_368f-SketchLine_369f-SketchLine_370f-SketchLine_371f-SketchLine_372f-SketchLine_373f-SketchLine_374f-SketchLine_375f-SketchLine_376f-SketchLine_377f-SketchCircle_3_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_7"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_4_2f")], model.selection(), 30, 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") # Test reexecution after parameter change Parameter_H.setValue(14) diff --git a/test.models/case24.py b/test.models/case24.py index 6a874b427..d14e67386 100644 --- a/test.models/case24.py +++ b/test.models/case24.py @@ -82,6 +82,7 @@ SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.endPoint(), Sketc model.do() Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_7r-SketchLine_1r-SketchLine_2r-SketchLine_8r-SketchArc_1_2f")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), 0, 180) ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_7r-SketchLine_1r-SketchLine_2r-SketchLine_8r-SketchArc_1_2f")], model.selection(), 0, 25, [model.selection("SOLID", "Revolution_1_1")]) +ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1") Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchLine_9 = Sketch_2.addLine(0, 20, -17.00000285538278, 20) SketchLine_9.setName("SketchLine_13") @@ -127,6 +128,7 @@ SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_10.startPoint(), Sk SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_11.endPoint(), SketchLine_10.result(), 20) model.do() ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13f-SketchLine_9f-SketchLine_10f-SketchLine_14f-SketchArc_2_2f")], model.selection(), 0, 25, [model.selection("SOLID", "ExtrusionFuse_1_1")]) +ExtrusionFuse_2.result().setName("ExtrusionFuse_2_1") Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_8")) SketchLine_15 = Sketch_3.addLine(0, -20, -17.00000002635728, -20) SketchLine_15.setName("SketchLine_19") @@ -175,6 +177,7 @@ SketchConstraintParallel_1 = Sketch_3.setParallel(SketchLine_17.result(), Sketch SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_21.startPoint(), SketchLine_18.result(), 3) model.do() RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "Sketch_3/Edge-SketchLine_21"), 71, 0, [model.selection("SOLID", "ExtrusionFuse_2_1")]) +RevolutionFuse_1.result().setName("RevolutionFuse_1_1") Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_7")) SketchLine_22 = Sketch_4.addLine(-3, -20, 17.00000452949485, -20) SketchLine_22.setName("SketchLine_26") @@ -224,6 +227,7 @@ SketchConstraintParallel_2 = Sketch_4.setParallel(SketchLine_25.result(), Sketch SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 3) model.do() RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_26f-SketchLine_22f-SketchLine_23f-SketchLine_27f-SketchArc_4_2f")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_29"), 0, 71, [model.selection("SOLID", "RevolutionFuse_1_1")]) +RevolutionFuse_2.result().setName("RevolutionFuse_2_1") Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ")) SketchLine_30 = Sketch_5.addLine(0, 0, 0, 82) SketchLine_31 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OZ")) @@ -305,6 +309,7 @@ SketchConstraintDistance_15 = Sketch_5.setDistance(SketchLine_37.startPoint(), S SketchConstraintDistance_15.setName("SketchConstraintDistance_16") model.do() RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_30r-SketchLine_39r-SketchLine_32r-SketchLine_40r-SketchLine_38r-SketchArc_6_2f-SketchArc_7_2r")], model.selection("EDGE", "PartSet/OZ"), 45, 315, [model.selection("SOLID", "RevolutionFuse_2_1")]) +RevolutionFuse_3.result().setName("RevolutionFuse_3_1") Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ")) SketchLine_38 = Sketch_6.addLine(19.99999999999999, 60, -20, 60) SketchLine_38.setName("SketchLine_48") @@ -411,6 +416,7 @@ SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchLine_41.startPoint SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_156") model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), 100, 0, [model.selection("SOLID", "RevolutionFuse_3_1")]) +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ")) SketchLine_50 = Sketch_7.addLine(65, 23.09999999999939, 65, 23.00000523211526) SketchLine_50.setName("SketchLine_61") @@ -494,6 +500,7 @@ SketchConstraintDistance_21 = Sketch_7.setDistance(SketchLine_50.startPoint(), S SketchConstraintDistance_21.setName("SketchConstraintDistance_23") model.do() RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "PartSet/OZ"), 14.4, 14.4, [model.selection("SOLID", "ExtrusionCut_1_1")]) +RevolutionFuse_4.result().setName("RevolutionFuse_4_1") Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ")) SketchCircle_1 = Sketch_8.addCircle(0, 45, 12.5) SketchLine_60 = Sketch_8.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_30")) @@ -510,6 +517,7 @@ SketchConstraintRadius_8 = Sketch_8.setRadius(SketchCircle_1.results()[1], 12.5) SketchConstraintRadius_8.setName("SketchConstraintRadius_13") model.do() ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_1_2f")], model.selection(), 100, 100, [model.selection("SOLID", "RevolutionFuse_4_1")]) +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") Sketch_9 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) SketchLine_62 = Sketch_9.addLine(0, 84, 0, -2) SketchLine_62.setName("SketchLine_65") @@ -782,6 +790,7 @@ SketchMultiRotation_2 = Sketch_11.addRotation([SketchCircle_3.results()[1], Sket [SketchCircle_4, SketchCircle_5, SketchCircle_6, SketchCircle_7] = SketchMultiRotation_2.rotated() model.do() RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "PartSet/OZ"), 0, 360, [model.selection("SOLID", "ExtrusionFuse_3_1")]) +RevolutionCut_1.result().setName("RevolutionCut_1_1") ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Wire-SketchCircle_4_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_5_2f")], model.selection(), 30, -15, [model.selection("SOLID", "RevolutionCut_1_1")]) ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Wire-SketchCircle_2_2f"), model.selection("FACE", "Sketch_11/Face-SketchCircle_6_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_7_2f")], model.selection(), 30, 2, [model.selection("SOLID", "ExtrusionCut_3_1")]) diff --git a/test.models/clothespin.py b/test.models/clothespin.py index 9e13a063c..fa64ebb96 100644 --- a/test.models/clothespin.py +++ b/test.models/clothespin.py @@ -181,6 +181,7 @@ SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30") model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4")) SketchLine_21 = Sketch_3.addLine(28, -6, -4.270492394552598, -6.000000000000001) SketchLine_21.setName("SketchLine_23") @@ -370,6 +371,7 @@ SketchLine_41.setName("SketchLine_43") SketchLine_41.result().setName("SketchLine_43") model.do() ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3.result().setName("ExtrusionCut_3_1") Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3")) Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchArc_4 = Sketch_5.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True) @@ -413,7 +415,9 @@ model.do() Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), 6, True) Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 3, True) ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_4.result().setName("ExtrusionCut_4_1") ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) +ExtrusionCut_5.result().setName("ExtrusionCut_5_1") Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_6")) SketchArc_5 = Sketch_6.addArc(45.99999999999999, 0, 45.49999999999999, 8.91700958118717e-020, 46.49999999999999, 8.280962276646116e-019, False) SketchLine_53 = Sketch_6.addLine(0, 0, 54, 0) @@ -465,6 +469,7 @@ SketchLine_56.setName("SketchLine_58") SketchLine_56.result().setName("SketchLine_58") model.do() ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")]) +ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1") Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12")) SketchLine_64 = Sketch_7.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997) SketchLine_64.setName("SketchLine_76") @@ -636,6 +641,7 @@ SketchConstraintRadius_7 = Sketch_7.setRadius(SketchArc_15.results()[1], 0.25) SketchConstraintRadius_8 = Sketch_7.setRadius(SketchArc_17.results()[1], 0.25) model.do() ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")]) +ExtrusionCut_6.result().setName("ExtrusionCut_6_1") Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_17")) SketchPoint_12 = Sketch_8.addPoint(53.99994409538203, -1.615587133892632e-027) SketchPoint_13 = Sketch_8.addPoint(53.99994409538203, -1.615587133892632e-027) @@ -784,6 +790,7 @@ SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchPoint_21.coordina SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_145") model.do() ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")]) +ExtrusionCut_7.result().setName("ExtrusionCut_7_1") Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_56")) SketchLine_94 = Sketch_9.addLine(21.00014787857639, 4.163450069699051, 21.00014787857639, 0) SketchLine_94.setName("SketchLine_107") @@ -927,6 +934,7 @@ model.do() Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 4, False) Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 4, True) ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection(), model.selection("FACE", "Plane_5"), 0, model.selection("FACE", "Plane_4"), 0, [model.selection("SOLID", "ExtrusionCut_7_1")]) +ExtrusionCut_8.result().setName("ExtrusionCut_8_1") Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_8_1/Modfied_5")) SketchCircle_1 = Sketch_10.addCircle(12, 6, 1) SketchConstraintRadius_11 = Sketch_10.setRadius(SketchCircle_1.results()[1], 1) @@ -953,6 +961,7 @@ SketchConstraintCoincidence_173.setName("SketchConstraintCoincidence_178") SketchConstraintDistance_17 = Sketch_10.setDistance(SketchLine_105.result(), SketchCircle_1.center(), 12) model.do() ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")]) +ExtrusionCut_9.result().setName("ExtrusionCut_9_1") model.do() Part_2 = model.addPart(partSet) Part_2_doc = Part_2.document() @@ -1112,6 +1121,7 @@ SketchConstraintCoincidence_199 = Sketch_12.setCoincident(SketchArc_26.endPoint( SketchConstraintCoincidence_199.setName("SketchConstraintCoincidence_30") model.do() ExtrusionCut_10 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_10.result().setName("ExtrusionCut_1_1") Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4")) SketchLine_127 = Sketch_13.addLine(28, -6, -4.270492394552598, -6.000000000000001) SketchLine_127.setName("SketchLine_23") @@ -1301,6 +1311,7 @@ SketchLine_147.setName("SketchLine_43") SketchLine_147.result().setName("SketchLine_43") model.do() ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_12.result().setName("ExtrusionCut_3_1") Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3")) Sketch_15 = model.addSketch(Part_2_doc, model.selection("FACE", "Plane_1")) SketchArc_27 = Sketch_15.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True) @@ -1344,7 +1355,9 @@ model.do() Plane_10 = model.addPlane(Part_2_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), 6, True) Plane_11 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 3, True) ExtrusionCut_13 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_13.result().setName("ExtrusionCut_4_1") ExtrusionCut_14 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) +ExtrusionCut_14.result().setName("ExtrusionCut_5_1") Sketch_16 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_6")) SketchArc_28 = Sketch_16.addArc(45.99999999999999, 0, 45.49999999999999, 8.91700958118717e-020, 46.49999999999999, 8.280962276646116e-019, False) SketchLine_159 = Sketch_16.addLine(0, 0, 54, 0) @@ -1396,6 +1409,7 @@ SketchLine_162.setName("SketchLine_58") SketchLine_162.result().setName("SketchLine_58") model.do() ExtrusionFuse_2 = model.addExtrusionFuse(Part_2_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")]) +ExtrusionFuse_2.result().setName("ExtrusionFuse_1_1") Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12")) SketchLine_170 = Sketch_17.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997) SketchLine_170.setName("SketchLine_76") @@ -1567,6 +1581,7 @@ SketchConstraintRadius_18 = Sketch_17.setRadius(SketchArc_38.results()[1], 0.25) SketchConstraintRadius_19 = Sketch_17.setRadius(SketchArc_40.results()[1], 0.25) model.do() ExtrusionCut_15 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")]) +ExtrusionCut_15.result().setName("ExtrusionCut_6_1") Sketch_18 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_17")) SketchPoint_36 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027) SketchPoint_37 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027) @@ -1715,6 +1730,7 @@ SketchConstraintCoincidence_314 = Sketch_18.setCoincident(SketchPoint_45.coordin SketchConstraintCoincidence_314.setName("SketchConstraintCoincidence_145") model.do() ExtrusionCut_16 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")]) +ExtrusionCut_16.result().setName("ExtrusionCut_7_1") Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_56")) SketchLine_200 = Sketch_19.addLine(21.00014787857639, 4.163450069699051, 21.00014787857639, 0) SketchLine_200.setName("SketchLine_107") @@ -1858,6 +1874,7 @@ model.do() Plane_12 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, False) Plane_13 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, True) ExtrusionCut_17 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection(), model.selection("FACE", "Plane_5"), 0, model.selection("FACE", "Plane_4"), 0, [model.selection("SOLID", "ExtrusionCut_7_1")]) +ExtrusionCut_17.result().setName("ExtrusionCut_8_1") Sketch_20 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_8_1/Modfied_5")) SketchCircle_2 = Sketch_20.addCircle(12, 6, 1) SketchConstraintRadius_22 = Sketch_20.setRadius(SketchCircle_2.results()[1], 1) @@ -1884,6 +1901,7 @@ SketchConstraintCoincidence_346.setName("SketchConstraintCoincidence_178") SketchConstraintDistance_34 = Sketch_20.setDistance(SketchLine_211.result(), SketchCircle_2.center(), 12) model.do() ExtrusionCut_18 = model.addExtrusionCut(Part_2_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")]) +ExtrusionCut_18.result().setName("ExtrusionCut_9_1") model.do() Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/ExtrusionCut_9_1/Modfied_1&ExtrusionCut_7_1/Modfied_57"), 180) Placement_1 = model.addPlacement(partSet, [model.selection("COMPOUND", "Rotation_1/")], model.selection("FACE", "Rotation_1/ExtrusionCut_5_1/Modfied_1"), model.selection("FACE", "Part_1/ExtrusionCut_5_1/Modfied_1"), False, True) diff --git a/test.models/ecran.py b/test.models/ecran.py index 2a2fdae03..8dbc307d9 100644 --- a/test.models/ecran.py +++ b/test.models/ecran.py @@ -117,6 +117,7 @@ SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_5.result(), S model.do() Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.") Extrusion_1.setName("Profil") +Extrusion_1.result().setName("Extrusion_1_1") Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7")) SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3) SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1")) @@ -157,6 +158,7 @@ SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39") model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) ExtrusionCut_1.setName("Decoupe_Angle") +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8")) SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3) SketchLine_22.setName("SketchLine_29") @@ -204,6 +206,7 @@ Sketch_3.setName("Sketch_4") Sketch_3.result().setName("Sketch_4") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")]) ExtrusionCut_2.setName("Chamfrein_1") +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_7")) SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3) SketchLine_30.setName("SketchLine_35") @@ -289,6 +292,7 @@ model.do() Sketch_4.setName("Sketch_5") Sketch_4.result().setName("Sketch_5") ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3.result().setName("ExtrusionCut_3_1") Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_9")) SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714) SketchLine_40.setName("SketchLine_58") @@ -936,6 +940,7 @@ model.do() Sketch_7.setName("Sketch_8") Sketch_7.result().setName("Sketch_8") ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_5_1")]) +ExtrusionCut_6.result().setName("ExtrusionCut_6_1") Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_2")) SketchLine_134 = Sketch_8.addLine(0.85, 50.75, -0.85, 50.75) SketchLine_134.setName("SketchLine_139") diff --git a/test.models/gear.py b/test.models/gear.py index 95a5d98cb..e0c52c036 100644 --- a/test.models/gear.py +++ b/test.models/gear.py @@ -197,8 +197,11 @@ SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_6.coordinate SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_6.coordinates(), SketchLine_86.result(), 24.5) model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")]) +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "PartSet/OX"), 0, 360, [model.selection("SOLID", "ExtrusionCut_1_1")]) +RevolutionCut_1.result().setName("RevolutionCut_1_1") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 0, 5, [model.selection("SOLID", "RevolutionCut_1_1")]) +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") model.do() # Test reexecution after parameter change diff --git a/test.models/idler_plate.py b/test.models/idler_plate.py index 2b08107f3..d3880bd79 100644 --- a/test.models/idler_plate.py +++ b/test.models/idler_plate.py @@ -165,7 +165,11 @@ Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-Sketc Face_2 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_1/Edge-SketchCircle_2_2")]) Face_3 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")]) Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_3_1")], model.selection(), 2, 0) +Extrusion_2.result().setName("Extrusion_2_1") +Extrusion_2.results()[1].setName("Extrusion_2_2") +Extrusion_2.results()[2].setName("Extrusion_2_3") Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2"), model.selection("SOLID", "Extrusion_2_3")], []) +Boolean_1.result().setName("Boolean_1_1") model.do() # Test reexecution after parameter change diff --git a/test.models/piece_02.py b/test.models/piece_02.py index bbcbdf6a5..9ca1d6335 100644 --- a/test.models/piece_02.py +++ b/test.models/piece_02.py @@ -130,6 +130,7 @@ SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_12.result(), Sketch model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2r"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_3_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")]) ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) SketchCircle_5 = Sketch_3.addCircle(20.99999999999342, 22.99999999999327, 19) SketchConstraintRadius_4 = Sketch_3.setRadius(SketchCircle_5.results()[1], 19) @@ -183,6 +184,7 @@ SketchConstraintDistance_4 = Sketch_3.setDistance(SketchCircle_6.center(), Sketc SketchConstraintDistance_5 = Sketch_3.setDistance(SketchCircle_6.center(), SketchLine_16.result(), 8) model.do() ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2f-SketchCircle_6_2r-SketchCircle_7_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3.result().setName("ExtrusionCut_3_1") Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_5")) SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6")) SketchLine_19 = SketchProjection_1.createdFeature() @@ -367,6 +369,8 @@ SketchConstraintMiddle_16 = Sketch_5.setMiddlePoint(SketchLine_37.endPoint(), Sk SketchConstraintDistance_12 = Sketch_5.setDistance(SketchCircle_8.center(), SketchLine_37.result(), 8) model.do() ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_29f-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchArc_9_2f-SketchArc_10_2f-SketchArc_11_2f-SketchArc_12_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")]) +ExtrusionCut_4.result().setName("ExtrusionCut_4_1") +ExtrusionCut_4.results()[1].setName("ExtrusionCut_4_2") ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_8_2f"), model.selection("FACE", "Sketch_5/Face-SketchCircle_9_2f")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionCut_4_1"), model.selection("SOLID", "ExtrusionCut_4_2")]) Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ")) SketchLine_38 = Sketch_6.addLine(-59, 44, -59, 2) @@ -439,6 +443,7 @@ SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), Ske SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17) model.do() ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")]) +ExtrusionCut_6.result().setName("ExtrusionCut_6_1") Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7")) SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655) SketchLine_49.setName("SketchLine_50") @@ -578,6 +583,7 @@ SketchConstraintCoincidence_94 = Sketch_9.setCoincident(SketchLine_60.endPoint() SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_95") model.do() RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")]) +RevolutionCut_1.result().setName("RevolutionCut_1_1") model.do() from GeomAPI import GeomAPI_Shape diff --git a/test.models/piece_09.py b/test.models/piece_09.py index 23c5a22c3..b4e332bc7 100644 --- a/test.models/piece_09.py +++ b/test.models/piece_09.py @@ -260,7 +260,9 @@ SketchConstraintDistance_17 = Sketch_3.setDistance(SketchLine_26.result(), Sketc SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_26.result(), "d7*coeff") model.do() ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_24r-SketchLine_26r-SketchLine_27r-SketchLine_28r-SketchLine_29r")], model.selection(), model.selection("FACE", "Extrusion_2_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_2_1")]) +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchLine_33r")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_19"), "d3*coeff", True) Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2")) SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_16&Extrusion_1_1/To_Face_1")) @@ -315,6 +317,7 @@ SketchConstraintDistance_22 = Sketch_5.setDistance(SketchCircle_1.center(), Sket SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_1.results()[1], "r_trou") model.do() ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3.result().setName("ExtrusionCut_3_1") Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_14")) SketchCircle_2 = Sketch_6.addCircle(70, -17.5, 5) SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/To_Face_1")) @@ -328,6 +331,7 @@ SketchConstraintDistance_24 = Sketch_6.setDistance(SketchCircle_2.center(), Sket SketchConstraintDistance_24.setName("SketchConstraintDistance_25") model.do() ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_4.result().setName("ExtrusionCut_4_1") Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8")) SketchLine_51 = Sketch_7.addLine(110, 21.46600893000899, 110, 7.22841614740048) SketchLine_51.setAuxiliary(True) @@ -373,6 +377,7 @@ SketchConstraintMirror_2 = Sketch_7.addMirror(SketchLine_59.result(), SketchCons model.do() ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2r-SketchLine_61f-SketchLine_62r"), model.selection("FACE", "Sketch_7/Face-SketchArc_18_2r-SketchLine_65f-SketchLine_66r"), model.selection("FACE", "Sketch_7/Face-SketchArc_17_2r-SketchLine_64r-SketchLine_66r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_15_2r-SketchLine_54f-SketchLine_55r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_10"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_4_1")]) Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_5_1")], [model.selection("SOLID", "Extrusion_3_1"), model.selection("SOLID", "ExtrusionCut_3_1")]) +Boolean_1.result().setName("Boolean_1_1") model.do() from GeomAPI import GeomAPI_Shape diff --git a/test.models/piece_12.py b/test.models/piece_12.py index 372a26a4c..871763ffc 100644 --- a/test.models/piece_12.py +++ b/test.models/piece_12.py @@ -343,9 +343,14 @@ SketchConstraintRadius_9.setName("SketchConstraintRadius_6") model.do() Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), "10*coeff", 0) ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_3_2f")], model.selection(), "p_trou1*coeff", 0, [model.selection("SOLID", "Extrusion_1_1")]) +ExtrusionCut_1.result().setName("ExtrusionCut_1_1") ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_1_2r")], model.selection(), "p2_trou1*coeff", 0, [model.selection("SOLID", "ExtrusionCut_1_1")]) +ExtrusionCut_2.result().setName("ExtrusionCut_2_1") ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_4_2f")], model.selection(), "p_trou2*coeff", 0, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_2_1")]) +ExtrusionCut_3.result().setName("ExtrusionCut_3_1") +ExtrusionCut_3.results()[1].setName("ExtrusionCut_3_2") ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_2_2r")], model.selection(), "p2_trou*coeff", 0, [model.selection("SOLID", "ExtrusionCut_3_2")]) +ExtrusionCut_4.result().setName("ExtrusionCut_4_1") Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "22.5*coeff", False) Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "45*coeff", True) Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2")) @@ -432,8 +437,11 @@ SketchConstraintDistance_14.setName("SketchConstraintDistance_12") model.do() Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0) Boolean_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "ExtrusionCut_4_1")]) +Boolean_1.result().setName("Boolean_1_1") ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "Boolean_1_1_1")]) +ExtrusionCut_5.result().setName("ExtrusionCut_5_1") ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_5_1_1")]) +ExtrusionCut_6.result().setName("ExtrusionCut_6_1") Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1_2/Modfied_1")) Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1")) SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OY")) @@ -520,8 +528,11 @@ SketchConstraintLength_10.setName("SketchConstraintLength_7") model.do() Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0) Boolean_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_6_1_1"), model.selection("SOLID", "Extrusion_4_1")], [model.selection("SOLID", "ExtrusionCut_6_1_2")]) +Boolean_2.result().setName("Boolean_2_1") ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Boolean_2_1_1")]) +ExtrusionCut_7.result().setName("ExtrusionCut_7_1") ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_7_1_1")]) +ExtrusionCut_8.result().setName("ExtrusionCut_8_1") Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Boolean_2_1_1/Modified_1")) SketchPoint_3 = Sketch_5.addPoint(model.selection("VERTEX", "PartSet/Origin")) SketchPoint_3.setName("SketchPoint_2") @@ -664,6 +675,7 @@ SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_11.results()[1], "r3 SketchConstraintRadius_14.setName("SketchConstraintRadius_12") model.do() ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")]) +ExtrusionCut_9.result().setName("ExtrusionCut_9_1") ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_7_2r-SketchArc_10_2f-SketchLine_44r-SketchArc_12_2r-SketchArc_13_2r-SketchLine_48r-SketchLine_43f-SketchArc_14_2f"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_50f-SketchArc_15_2f-SketchArc_16_2r-SketchLine_51r-SketchArc_17_2r-SketchLine_52f"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchArc_8_2r-SketchArc_9_2f-SketchLine_42r-SketchLine_45f-SketchLine_46r-SketchArc_11_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modfied_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")]) Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_2")) SketchLine_50 = Sketch_8.addLine(37, 14.80042035331162, 37, -14) @@ -764,6 +776,7 @@ SketchConstraintRadius_16 = Sketch_9.setRadius(SketchArc_23.results()[1], "3*coe SketchConstraintRadius_16.setName("SketchConstraintRadius_17") model.do() ExtrusionCut_12 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchArc_25_2r-SketchLine_67f-SketchLine_68f")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "Extrusion_5_1")]) +ExtrusionCut_12.result().setName("ExtrusionCut_12_1") model.do() from GeomAPI import GeomAPI_Shape