From: bruneton Date: Tue, 10 Dec 2013 10:57:12 +0000 (+0000) Subject: Minor: documentation and comments X-Git-Tag: V7_3_1b1^2~47 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=458cb8f8d540e799c86394c512154d7fc9d74d68;p=modules%2Fmed.git Minor: documentation and comments --- diff --git a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DComposedEdge.cxx b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DComposedEdge.cxx index 8242278d7..464702dd0 100644 --- a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DComposedEdge.cxx +++ b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DComposedEdge.cxx @@ -136,6 +136,10 @@ void ComposedEdge::initLocations() const (*iter)->initLocations(); } +/** + * Reset the status of all edges (OUT, IN, ON) because they were potentially assignated + * by the previous candidate processing. + */ void ComposedEdge::initLocationsWithOther(const ComposedEdge& other) const { std::set s1,s2; @@ -415,6 +419,9 @@ void ComposedEdge::getBarycenter(double *bary, double& weigh) const bary[1]/=weigh; } +/** + * Detect if the node is in the Polygon (ComposedEdge or not) + */ bool ComposedEdge::isInOrOut(Node *nodeToTest) const { Bounds b; b.prepareForAggregation(); diff --git a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DEdge.cxx b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DEdge.cxx index 41c4240c2..12fbbee7f 100644 --- a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DEdge.cxx +++ b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DEdge.cxx @@ -875,7 +875,11 @@ inline bool eqpair(const std::pair& p1, const std::pair& addNodes, const std::map& mapp1, const std::map& mapp2, std::vector& edgesThis) +/** + * Sort nodes so that they all lie consecutively on the edge that has been cut. + */ +void Edge::sortIdsAbs(const std::vector& addNodes, const std::map& mapp1, + const std::map& mapp2, std::vector& edgesThis) { Bounds b; b.prepareForAggregation(); diff --git a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DEdge.hxx b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DEdge.hxx index d646efc3c..4076f70b2 100644 --- a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DEdge.hxx +++ b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DEdge.hxx @@ -190,9 +190,9 @@ namespace INTERP_KERNEL /*! * Deal with an oriented edge of a polygon. - * An Edge is definied with a start node a end node and an equation of 1D curve. + * An Edge is defined with a start node, an end node and an equation of 1D curve. * All other attributes are mutable because they don't impact these 3 invariant attributes. - * To be exact start and end node can change (adress) but their location remain + * To be exact start and end nodes can change (address) but their location remain * the same (at precision). */ class INTERPKERNEL_EXPORT Edge diff --git a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DElementaryEdge.cxx b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DElementaryEdge.cxx index ba69360f2..43e13b4de 100644 --- a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DElementaryEdge.cxx +++ b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DElementaryEdge.cxx @@ -137,7 +137,7 @@ TypeOfEdgeLocInPolygon ElementaryEdge::locateFullyMySelf(const ComposedEdge& pol TypeOfEdgeLocInPolygon ElementaryEdge::locateFullyMySelfAbsolute(const ComposedEdge& pol) const { - Node *node=_ptr->buildRepresentantOfMySelf(); + Node *node=_ptr->buildRepresentantOfMySelf(); // build barycenter used to detect if the edge is IN or OUT if(pol.isInOrOut(node)) declareIn(); else diff --git a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DQuadraticPolygon.cxx b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DQuadraticPolygon.cxx index 2e262b730..f8c6a4477 100644 --- a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DQuadraticPolygon.cxx +++ b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DQuadraticPolygon.cxx @@ -225,18 +225,29 @@ double QuadraticPolygon::intersectWithAbs(QuadraticPolygon& other) } /*! - * This method splits 'this' with 'other' into smaller pieces localizable. 'mapThis' is a map that gives the correspondance between nodes contained in 'this' and node ids in a global mesh. - * In the same way, 'mapOther' gives the correspondance between nodes contained in 'other' and node ids in a global mesh from wich 'other' is extracted. - * This method has 1 out paramater : 'edgesThis', After the call of this method contains nodal connectivity (including type) of 'this' into globlal "this mesh". - * This method has 2 in/out parameters : 'subDivOther' and 'addCoo'.'otherEdgeIds' is useful to put values in 'edgesThis', 'subDivOther' and 'addCoo'. + * This method splits 'this' with 'other' into smaller pieces localizable. 'mapThis' is a map that gives the correspondance + * between nodes contained in 'this' and node ids in a global mesh. + * In the same way, 'mapOther' gives the correspondance between nodes contained in 'other' and node ids in a + * global mesh from wich 'other' is extracted. + * This method has 1 out paramater : 'edgesThis', After the call of this method, it contains the nodal connectivity (including type) + * of 'this' into globlal "this mesh". + * This method has 2 in/out parameters : 'subDivOther' and 'addCoo'.'otherEdgeIds' is useful to put values in + * 'edgesThis', 'subDivOther' and 'addCoo'. * Size of 'otherEdgeIds' has to be equal to number of ElementaryEdges in 'other'. No check of that will be done. + * The term 'abs' in the name recalls that we normalize the mesh (spatially) so that node coordinates fit into [0;1]. * @param offset1 is the number of nodes contained in global mesh from which 'this' is extracted. * @param offset2 is the sum of nodes contained in global mesh from which 'this' is extracted and 'other' is extracted. * @param edgesInOtherColinearWithThis will be appended at the end of the vector with colinear edge ids of other (if any) - * @otherEdgeIds is a vector with the same size than other before calling this method. It gives in the same order the cell id in global other mesh. + * @param otherEdgeIds is a vector with the same size than other before calling this method. It gives in the same order + * the cell id in global other mesh. */ -void QuadraticPolygon::splitAbs(QuadraticPolygon& other, const std::map& mapThis, const std::map& mapOther, int offset1, int offset2 , const std::vector& otherEdgeIds, - std::vector& edgesThis, int cellIdThis, std::vector< std::vector >& edgesInOtherColinearWithThis, std::vector< std::vector >& subDivOther, std::vector& addCoo) +void QuadraticPolygon::splitAbs(QuadraticPolygon& other, + const std::map& mapThis, const std::map& mapOther, + int offset1, int offset2 , + const std::vector& otherEdgeIds, + std::vector& edgesThis, int cellIdThis, + std::vector< std::vector >& edgesInOtherColinearWithThis, std::vector< std::vector >& subDivOther, + std::vector& addCoo) { double xBaryBB, yBaryBB; double fact=normalizeExt(&other, xBaryBB, yBaryBB); @@ -306,8 +317,10 @@ void QuadraticPolygon::splitAbs(QuadraticPolygon& other, const std::map& mapp, bool isQuad, const int *nodalBg, const double *coords, const int *descBg, const int *descEnd, const std::vector >& intersectEdges) @@ -319,13 +332,15 @@ void QuadraticPolygon::buildFromCrudeDataArray(const std::map& mapp, bool isQuad, const int *nodalBg, const double *coords, - const int *descBg, const int *descEnd, const std::vector >& intersectEdges) + +void QuadraticPolygon::appendEdgeFromCrudeDataArray(std::size_t edgePos, const std::map& mapp, bool isQuad, + const int *nodalBg, const double *coords, + const int *descBg, const int *descEnd, const std::vector >& intersectEdges) { if(!isQuad) { bool direct=descBg[edgePos]>0; - int edgeId=abs(descBg[edgePos])-1; + int edgeId=abs(descBg[edgePos])-1; // back to C indexing mode const std::vector& subEdge=intersectEdges[edgeId]; std::size_t nbOfSubEdges=subEdge.size()/2; for(std::size_t j=0;j >& intersectEdges, const INTERP_KERNEL::QuadraticPolygon& pol1, const int *descBg1, const int *descEnd1, const std::vector >& intersectEdges1, const std::vector< std::vector >& colinear1) const +void QuadraticPolygon::updateLocOfEdgeFromCrudeDataArray2(const int *descBg, const int *descEnd, const std::vector >& intersectEdges, + const INTERP_KERNEL::QuadraticPolygon& pol1, const int *descBg1, const int *descEnd1, + const std::vector >& intersectEdges1, const std::vector< std::vector >& colinear1) const { std::size_t nbOfSeg=std::distance(descBg,descEnd); for(std::size_t i=0;i res=buildIntersectionPolygons(other,*this); for(std::vector::iterator it=res.begin();it!=res.end();it++) { diff --git a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DQuadraticPolygon.hxx b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DQuadraticPolygon.hxx index 6e5db5b1f..4df9e861b 100644 --- a/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DQuadraticPolygon.hxx +++ b/src/INTERP_KERNEL/Geometric2D/InterpKernelGeo2DQuadraticPolygon.hxx @@ -35,6 +35,11 @@ namespace INTERP_KERNEL class Edge; class MergePoints; + /** + * A set of quadratic or linear edges, not necessarily connected to form a closed polygon. + * Some methods however requires a closed form. + * Class ComposedEdge focuses more on connectivity aspect. + */ class QuadraticPolygon : public ComposedEdge { public: diff --git a/src/MEDCoupling/MEDCouplingUMesh.cxx b/src/MEDCoupling/MEDCouplingUMesh.cxx index 6afb8bf8f..44c34fd20 100644 --- a/src/MEDCoupling/MEDCouplingUMesh.cxx +++ b/src/MEDCoupling/MEDCouplingUMesh.cxx @@ -4071,6 +4071,7 @@ namespace ParaMEDMEM INTERP_KERNEL::EdgeLin *e1=new INTERP_KERNEL::EdgeLin(mapp2[bg[0]].first,mapp2[bg[2]].first); INTERP_KERNEL::EdgeLin *e2=new INTERP_KERNEL::EdgeLin(mapp2[bg[2]].first,mapp2[bg[1]].first); INTERP_KERNEL::SegSegIntersector inters(*e1,*e2); + // is the SEG3 degenerated, and thus can be reduced to a SEG2? bool colinearity=inters.areColinears(); delete e1; delete e2; if(colinearity) @@ -4087,11 +4088,14 @@ namespace ParaMEDMEM } /*! - * This method creates a sub mesh in Geometric2D DS. The sub mesh is composed be the sub set of cells in 'candidates' and the global mesh 'mDesc'. - * The input meth 'mDesc' must be so that mDim==1 et spaceDim==3. - * 'mapp' contains a mapping between local numbering in submesh and the global node numbering in 'mDesc'. + * This method creates a sub mesh in Geometric2D DS. The sub mesh is composed by the sub set of cells in 'candidates' taken from + * the global mesh 'mDesc'. + * The input mesh 'mDesc' must be so that mDim==1 and spaceDim==2. + * 'mapp' returns a mapping between local numbering in submesh (represented by a Node*) and the global node numbering in 'mDesc'. */ - INTERP_KERNEL::QuadraticPolygon *MEDCouplingUMeshBuildQPFromMesh(const MEDCouplingUMesh *mDesc, const std::vector& candidates, std::map& mapp) throw(INTERP_KERNEL::Exception) + INTERP_KERNEL::QuadraticPolygon *MEDCouplingUMeshBuildQPFromMesh(const MEDCouplingUMesh *mDesc, const std::vector& candidates, + std::map& mapp) + throw(INTERP_KERNEL::Exception) { mapp.clear(); std::map > mapp2;//bool is for a flag specifying if node is boundary (true) or only a middle for SEG3. @@ -4136,6 +4140,9 @@ namespace ParaMEDMEM return new INTERP_KERNEL::Node(coo1[2*nodeId],coo1[2*nodeId+1]); } + /** + * Construct a mapping between set of Nodes and the standart MEDCoupling connectivity format (c, cI). + */ void MEDCouplingUMeshBuildQPFromMesh3(const double *coo1, int offset1, const double *coo2, int offset2, const std::vector& addCoo, const int *desc1Bg, const int *desc1End, const std::vector >& intesctEdges1, /*output*/std::map& mapp, std::map& mappRev) @@ -8249,7 +8256,10 @@ std::string MEDCouplingUMesh::getVTKDataSetType() const /*! * Partitions the first given 2D mesh using the second given 2D mesh as a tool, and - * returns a result mesh constituted by polygons. The meshes should be in 2D space. In + * returns a result mesh constituted by polygons. + * Thus the final result contains all nodes from m1 plus new nodes. However it doesn't necessarily contains + * all nodes from m2. + * The meshes should be in 2D space. In * addition, returns two arrays mapping cells of the result mesh to cells of the input * meshes. * \param [in] m1 - the first input mesh which is a partitioned object. @@ -8270,31 +8280,40 @@ std::string MEDCouplingUMesh::getVTKDataSetType() const * \throw If the nodal connectivity of cells is not defined in any of the meshes. * \throw If any of the meshes is not a 2D mesh in 2D space. */ -MEDCouplingUMesh *MEDCouplingUMesh::Intersect2DMeshes(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, double eps, DataArrayInt *&cellNb1, DataArrayInt *&cellNb2) +MEDCouplingUMesh *MEDCouplingUMesh::Intersect2DMeshes(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, + double eps, DataArrayInt *&cellNb1, DataArrayInt *&cellNb2) { m1->checkFullyDefined(); m2->checkFullyDefined(); if(m1->getMeshDimension()!=2 || m1->getSpaceDimension()!=2 || m2->getMeshDimension()!=2 || m2->getSpaceDimension()!=2) throw INTERP_KERNEL::Exception("MEDCouplingUMesh::Intersect2DMeshes works on umeshes m1 AND m2 with meshdim equal to 2 and spaceDim equal to 2 too!"); + + // Step 1: compute all edge intersections (new nodes) std::vector< std::vector > intersectEdge1, colinear2, subDiv2; - MEDCouplingUMesh *m1Desc=0,*m2Desc=0; + MEDCouplingUMesh *m1Desc=0,*m2Desc=0; // descending connec. meshes DataArrayInt *desc1=0,*descIndx1=0,*revDesc1=0,*revDescIndx1=0,*desc2=0,*descIndx2=0,*revDesc2=0,*revDescIndx2=0; - std::vector addCoo,addCoordsQuadratic; + std::vector addCoo,addCoordsQuadratic; // coordinates of newly created nodes INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps; INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps; - IntersectDescending2DMeshes(m1,m2,eps,intersectEdge1,colinear2, subDiv2,m1Desc,desc1,descIndx1,revDesc1,revDescIndx1, - m2Desc,desc2,descIndx2,revDesc2,revDescIndx2,addCoo); + IntersectDescending2DMeshes(m1,m2,eps,intersectEdge1,colinear2, subDiv2, + m1Desc,desc1,descIndx1,revDesc1,revDescIndx1, + addCoo, m2Desc,desc2,descIndx2,revDesc2,revDescIndx2); revDesc1->decrRef(); revDescIndx1->decrRef(); revDesc2->decrRef(); revDescIndx2->decrRef(); MEDCouplingAutoRefCountObjectPtr dd1(desc1),dd2(descIndx1),dd3(desc2),dd4(descIndx2); MEDCouplingAutoRefCountObjectPtr dd5(m1Desc),dd6(m2Desc); + + // Step 2: re-order newly created nodes according to the ordering found in m2 std::vector< std::vector > intersectEdge2; BuildIntersectEdges(m1Desc,m2Desc,addCoo,subDiv2,intersectEdge2); subDiv2.clear(); dd5=0; dd6=0; + + // Step 3: std::vector cr,crI; //no DataArrayInt because interface with Geometric2D std::vector cNb1,cNb2; //no DataArrayInt because interface with Geometric2D BuildIntersecting2DCellsFromEdges(eps,m1,desc1->getConstPointer(),descIndx1->getConstPointer(),intersectEdge1,colinear2,m2,desc2->getConstPointer(),descIndx2->getConstPointer(),intersectEdge2,addCoo, /* outputs -> */addCoordsQuadratic,cr,crI,cNb1,cNb2); - // + + // Step 4: Prepare final result: MEDCouplingAutoRefCountObjectPtr addCooDa=DataArrayDouble::New(); addCooDa->alloc((int)(addCoo.size())/2,2); std::copy(addCoo.begin(),addCoo.end(),addCooDa->getPointer()); @@ -8315,6 +8334,15 @@ MEDCouplingUMesh *MEDCouplingUMesh::Intersect2DMeshes(const MEDCouplingUMesh *m1 return ret.retn(); } + +/** + * Private. Third step of the partitioning algorithm (Intersect2DMeshes): reconstruct full 2D cells from the + * (newly created) nodes corresponding to the edge intersections. + * Output params: + * @param[out] cr, crI connectivity of the resulting mesh + * @param[out] cNb1, cNb2 correspondance arrays giving for the merged mesh the initial cells IDs in m1 / m2 + * TODO: describe input parameters + */ void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCouplingUMesh *m1, const int *desc1, const int *descIndx1, const std::vector >& intesctEdges1, const std::vector< std::vector >& colinear2, const MEDCouplingUMesh *m2, const int *desc2, const int *descIndx2, const std::vector >& intesctEdges2, @@ -8333,6 +8361,7 @@ void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCo int offset3=offset2+((int)addCoords.size())/2; MEDCouplingAutoRefCountObjectPtr bbox1Arr(m1->getBoundingBoxForBBTree()),bbox2Arr(m2->getBoundingBoxForBBTree()); const double *bbox1(bbox1Arr->begin()),*bbox2(bbox2Arr->begin()); + // Here a BBTree on 2D-cells, not on segments: BBTree myTree(bbox2,0,0,m2->getNumberOfCells(),eps); int ncell1=m1->getNumberOfCells(); crI.push_back(0); @@ -8346,6 +8375,7 @@ void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCo INTERP_KERNEL::NormalizedCellType typ=(INTERP_KERNEL::NormalizedCellType)conn1[connI1[i]]; const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel(typ); MEDCouplingUMeshBuildQPFromMesh3(coo1,offset1,coo2,offset2,addCoords,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,/* output */mapp,mappRev); + // pol1 is the full cell from mesh2, in QP format, with all the additional intersecting nodes. pol1.buildFromCrudeDataArray(mappRev,cm.isQuadratic(),conn1+connI1[i]+1,coo1, desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1); // @@ -8355,7 +8385,7 @@ void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCo for(it1.first();!it1.finished();it1.next()) edges1.insert(it1.current()->getPtr()); // - std::map > edgesIn2ForShare; + std::map > edgesIn2ForShare; // common edges std::vector pol2s(candidates2.size()); int ii=0; for(std::vector::const_iterator it2=candidates2.begin();it2!=candidates2.end();it2++,ii++) @@ -8363,6 +8393,7 @@ void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCo INTERP_KERNEL::NormalizedCellType typ2=(INTERP_KERNEL::NormalizedCellType)conn2[connI2[*it2]]; const INTERP_KERNEL::CellModel& cm2=INTERP_KERNEL::CellModel::GetCellModel(typ2); MEDCouplingUMeshBuildQPFromMesh3(coo1,offset1,coo2,offset2,addCoords,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,/* output */mapp,mappRev); + // pol2 is the new QP in the final merged result. pol2s[ii].buildFromCrudeDataArray2(mappRev,cm2.isQuadratic(),conn2+connI2[*it2]+1,coo2,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2, pol1,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,colinear2,edgesIn2ForShare); } @@ -8374,6 +8405,8 @@ void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCo //MEDCouplingUMeshAssignOnLoc(pol1,pol2,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,colinear2); pol1.buildPartitionsAbs(pol2s[ii],edges1,edgesBoundary2,mapp,i,*it2,offset3,addCoordsQuadratic,cr,crI,cNb1,cNb2); } + // Deals with remaining (non-consumed) edges from m1: these are the edges that were never touched + // by m2 but that we still want to keep in the final result. if(!edges1.empty()) { try @@ -8393,15 +8426,19 @@ void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCo /*! * This method is private and is the first step of Partition of 2D mesh (spaceDim==2 and meshDim==2). - * + * It builds the descending connectivity of the two meshes, and then using a binary tree + * it computes the edge intersections. This results in new points being created : they're stored in addCoo. + * Documentation about parameters colinear2 and subDiv2 can be found in method QuadraticPolygon::splitAbs(). */ void MEDCouplingUMesh::IntersectDescending2DMeshes(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, double eps, std::vector< std::vector >& intersectEdge1, std::vector< std::vector >& colinear2, std::vector< std::vector >& subDiv2, MEDCouplingUMesh *& m1Desc, DataArrayInt *&desc1, DataArrayInt *&descIndx1, DataArrayInt *&revDesc1, DataArrayInt *&revDescIndx1, - MEDCouplingUMesh *& m2Desc, DataArrayInt *&desc2, DataArrayInt *&descIndx2, DataArrayInt *&revDesc2, DataArrayInt *&revDescIndx2, - std::vector& addCoo) throw(INTERP_KERNEL::Exception) + std::vector& addCoo, + MEDCouplingUMesh *& m2Desc, DataArrayInt *&desc2, DataArrayInt *&descIndx2, DataArrayInt *&revDesc2, DataArrayInt *&revDescIndx2) + throw(INTERP_KERNEL::Exception) { static const int SPACEDIM=2; + // Build desc connectivity desc1=DataArrayInt::New(); descIndx1=DataArrayInt::New(); revDesc1=DataArrayInt::New(); revDescIndx1=DataArrayInt::New(); desc2=DataArrayInt::New(); descIndx2=DataArrayInt::New(); @@ -8414,29 +8451,33 @@ void MEDCouplingUMesh::IntersectDescending2DMeshes(const MEDCouplingUMesh *m1, c MEDCouplingAutoRefCountObjectPtr dd9(m1Desc),dd10(m2Desc); const int *c1=m1Desc->getNodalConnectivity()->getConstPointer(); const int *ci1=m1Desc->getNodalConnectivityIndex()->getConstPointer(); + + // Build BB tree of all edges in the tool mesh (second mesh) MEDCouplingAutoRefCountObjectPtr bbox1Arr(m1Desc->getBoundingBoxForBBTree()),bbox2Arr(m2Desc->getBoundingBoxForBBTree()); const double *bbox1(bbox1Arr->begin()),*bbox2(bbox2Arr->begin()); - int ncell1=m1Desc->getNumberOfCells(); - int ncell2=m2Desc->getNumberOfCells(); - intersectEdge1.resize(ncell1); - colinear2.resize(ncell2); - subDiv2.resize(ncell2); + int nDescCell1=m1Desc->getNumberOfCells(); + int nDescCell2=m2Desc->getNumberOfCells(); + intersectEdge1.resize(nDescCell1); + colinear2.resize(nDescCell2); + subDiv2.resize(nDescCell2); BBTree myTree(bbox2,0,0,m2Desc->getNumberOfCells(),-eps); + std::vector candidates1(1); int offset1=m1->getNumberOfNodes(); int offset2=offset1+m2->getNumberOfNodes(); - for(int i=0;i candidates2; + std::vector candidates2; // edges of mesh2 candidate for intersection myTree.getIntersectingElems(bbox1+i*2*SPACEDIM,candidates2); - if(!candidates2.empty()) + if(!candidates2.empty()) // candidates2 holds edges from the second mesh potentially intersecting current edge i in mesh1 { std::map map1,map2; + // pol2 is not necessarily a closed polygon: just a set of (quadratic) edges (same as candidates2) in the Geometric DS format INTERP_KERNEL::QuadraticPolygon *pol2=MEDCouplingUMeshBuildQPFromMesh(m2Desc,candidates2,map2); candidates1[0]=i; INTERP_KERNEL::QuadraticPolygon *pol1=MEDCouplingUMeshBuildQPFromMesh(m1Desc,candidates1,map1); - // this following part is to avoid that a some remove nodes (for example due to a merge between pol1 and pol2) can be replaced by a newlt created one - // This trick garanties that Node * are discriminant + // This following part is to avoid that some removed nodes (for example due to a merge between pol1 and pol2) are replaced by a newly created one + // This trick guarantees that Node * are discriminant (i.e. form a unique identifier) std::set nodes; pol1->getAllNodes(nodes); pol2->getAllNodes(nodes); std::size_t szz(nodes.size()); @@ -8445,6 +8486,7 @@ void MEDCouplingUMesh::IntersectDescending2DMeshes(const MEDCouplingUMesh *m1, c for(std::size_t iii=0;iiiincrRef(); nodesSafe[iii]=*itt; } // end of protection + // Performs egde cutting: pol1->splitAbs(*pol2,map1,map2,offset1,offset2,candidates2,intersectEdge1[i],i,colinear2,subDiv2,addCoo); delete pol2; delete pol1; @@ -8461,13 +8503,18 @@ void MEDCouplingUMesh::IntersectDescending2DMeshes(const MEDCouplingUMesh *m1, c * This method has 4 inputs : * - a mesh 'm1' with meshDim==1 and a SpaceDim==2 * - a mesh 'm2' with meshDim==1 and a SpaceDim==2 - * - subDiv of size 'm2->getNumberOfCells()' that lists for each seg cell in 'm' the splitting node ids in randomly sorted. - * The aim of this method is to sort the splitting nodes, if any, and to put in 'intersectEdge' output paramter based on edges of mesh 'm2' - * \param m1 is expected to be a mesh of meshDimension equal to 1 and spaceDim equal to 2. No check of that is performed by this method. Only present for its coords in case of 'subDiv' shares some nodes of 'm1' + * - subDiv of size 'm2->getNumberOfCells()' that lists for each seg cell in 'm' the splitting node ids randomly sorted. + * The aim of this method is to sort the splitting nodes, if any, and to put them in 'intersectEdge' output parameter based on edges of mesh 'm2' + * Nodes end up lying consecutively on a cutted edge. + * \param m1 is expected to be a mesh of meshDimension equal to 1 and spaceDim equal to 2. No check of that is performed by this method. + * (Only present for its coords in case of 'subDiv' shares some nodes of 'm1') * \param m2 is expected to be a mesh of meshDimension equal to 1 and spaceDim equal to 2. No check of that is performed by this method. - * \param addCoo input parameter with additionnal nodes linked to intersection of the 2 meshes. + * \param addCoo input parameter with additional nodes linked to intersection of the 2 meshes. + * \param[out] intersectEdge the same content as subDiv, but correclty oriented. */ -void MEDCouplingUMesh::BuildIntersectEdges(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, const std::vector& addCoo, const std::vector< std::vector >& subDiv, std::vector< std::vector >& intersectEdge) +void MEDCouplingUMesh::BuildIntersectEdges(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, + const std::vector& addCoo, + const std::vector< std::vector >& subDiv, std::vector< std::vector >& intersectEdge) { int offset1=m1->getNumberOfNodes(); int ncell=m2->getNumberOfCells(); diff --git a/src/MEDCoupling/MEDCouplingUMesh.hxx b/src/MEDCoupling/MEDCouplingUMesh.hxx index d7c28f5b6..fea05ddee 100644 --- a/src/MEDCoupling/MEDCouplingUMesh.hxx +++ b/src/MEDCoupling/MEDCouplingUMesh.hxx @@ -301,8 +301,9 @@ namespace ParaMEDMEM static void IntersectDescending2DMeshes(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, double eps, std::vector< std::vector >& intersectEdge1, std::vector< std::vector >& colinear2, std::vector< std::vector >& subDiv2, MEDCouplingUMesh *& m1Desc, DataArrayInt *&desc1, DataArrayInt *&descIndx1, DataArrayInt *&revDesc1, DataArrayInt *&revDescIndx1, - MEDCouplingUMesh *& m2Desc, DataArrayInt *&desc2, DataArrayInt *&descIndx2, DataArrayInt *&revDesc2, DataArrayInt *&revDescIndx2, - std::vector& addCoo) throw(INTERP_KERNEL::Exception); + std::vector& addCoo, + MEDCouplingUMesh *& m2Desc, DataArrayInt *&desc2, DataArrayInt *&descIndx2, DataArrayInt *&revDesc2, DataArrayInt *&revDescIndx2) + throw(INTERP_KERNEL::Exception); static void BuildIntersectEdges(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, const std::vector& addCoo, const std::vector< std::vector >& subDiv, std::vector< std::vector >& intersectEdge); static void BuildIntersecting2DCellsFromEdges(double eps, const MEDCouplingUMesh *m1, const int *desc1, const int *descIndx1, const std::vector >& intesctEdges1, const std::vector< std::vector >& colinear2, const MEDCouplingUMesh *m2, const int *desc2, const int *descIndx2, const std::vector >& intesctEdges2,