From: azv Date: Thu, 20 Feb 2020 04:58:03 +0000 (+0300) Subject: Test case for issue #2918. X-Git-Tag: V9_5_0a1~22 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=3150815dd00d5d8fa3722e052077403420663872;p=modules%2Fshaper.git Test case for issue #2918. --- diff --git a/src/FeaturesPlugin/CMakeLists.txt b/src/FeaturesPlugin/CMakeLists.txt index f307e317b..45dd74930 100644 --- a/src/FeaturesPlugin/CMakeLists.txt +++ b/src/FeaturesPlugin/CMakeLists.txt @@ -568,4 +568,5 @@ ADD_UNIT_TESTS(TestExtrusion.py TestDefeaturing_OnCompound.py Test3137_1.py Test3137_2.py + Test2918.py ) diff --git a/src/FeaturesPlugin/Test/Test2918.py b/src/FeaturesPlugin/Test/Test2918.py new file mode 100644 index 000000000..58f68cda4 --- /dev/null +++ b/src/FeaturesPlugin/Test/Test2918.py @@ -0,0 +1,328 @@ +# Copyright (C) 2019-2020 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from GeomAPI import * +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) +SketchLine_1 = Sketch_1.addLine(6.188, 9.028, 6.188, -3.45) +SketchLine_2 = Sketch_1.addLine(6.188, -3.45, 0, -3.45) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchLine_3 = Sketch_1.addLine(0, -3.45, 0, -6.45) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchLine_4 = Sketch_1.addLine(0, -6.45, 7.782, -6.45) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchLine_5 = Sketch_1.addLine(7.782, -6.45, 7.782, -3.45) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint()) +SketchLine_6 = Sketch_1.addLine(7.782, -3.45, 6.538, -3.45) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchLine_7 = Sketch_1.addLine(6.538, -3.45, 6.538, -2.4) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchLine_8 = Sketch_1.addLine(6.538, -2.4, 6.376, -2.25) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint()) +SketchLine_9 = Sketch_1.addLine(6.376, -2.25, 6.376, 9.028) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchLine_10 = Sketch_1.addLine(6.376, 9.028, 6.188, 9.028) +SketchLine_10.setAuxiliary(True) +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint()) +SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.endPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_10.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_3.result()) +SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_5.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_2.result()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_4.result()) +SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchLine_2.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_11 = SketchProjection_1.createdFeature() +SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_11.result()) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_5.result(), 3) +SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_11).startPoint(), SketchLine_1.result(), 6.188, True) +SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_7.result()) +SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_12 = SketchProjection_2.createdFeature() +SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_9.endPoint(), SketchLine_12.result(), 9.028, True) +SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_9.result(), 0.188, True) +SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_7.result(), 0.35, True) +SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchLine_7.endPoint(), SketchLine_8.endPoint(), 0.15) +SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_12.result(), 3.45, True) +SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_12.result(), 2.25, True) +SketchLine_13 = Sketch_1.addLine(7.032, -4.05, 5.532, -4.05) +SketchLine_14 = Sketch_1.addLine(5.532, -4.05, 5.532, -5.85) +SketchLine_15 = Sketch_1.addLine(5.532, -5.85, 7.032, -5.85) +SketchLine_16 = Sketch_1.addLine(7.032, -5.85, 7.032, -4.05) +SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint()) +SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint()) +SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint()) +SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint()) +SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_13.result()) +SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_14.result()) +SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_15.result()) +SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_16.result()) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_14.result(), 1.8) +SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_15.result(), 1.5) +SketchLine_17 = Sketch_1.addLine(6.282, -4.05, 6.282, 9.028) +SketchLine_17.setAuxiliary(True) +SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchLine_13.result()) +SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_10.result()) +SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_17.result()) +SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchLine_17.startPoint(), SketchLine_13.result()) +SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_17.startPoint(), SketchLine_5.result(), 1.5, True) +SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchLine_10.result(), SketchLine_17.endPoint()) +SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_14.startPoint(), SketchLine_2.result(), 0.6, True) +SketchLine_18 = Sketch_1.addLine(6.376, 9.028, 6.535, 9.187) +SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_18.startPoint()) +SketchLine_19 = Sketch_1.addLine(6.535, 9.187, 6.535, 10.256) +SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint()) +SketchLine_20 = Sketch_1.addLine(6.535, 10.256, 6.185, 10.256) +SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint()) +SketchLine_21 = Sketch_1.addLine(6.185, 10.256, 4.9175, 10.94235984621998) +SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint()) +SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_20.result()) +SketchConstraintVertical_9 = Sketch_1.setVertical(SketchLine_19.result()) +SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_10.result(), SketchLine_18.result(), 45, type = "Supplementary") +SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_20.result(), 0.35) +SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_19.endPoint(), SketchLine_12.result(), 10.256, True) +SketchArc_1 = Sketch_1.addArc(0, 2.425, 4.9175, 10.94235984621998, 0, 12.26, False) +SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_1.center()) +SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchArc_1.startPoint()) +SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_1.endPoint()) +SketchLine_22 = Sketch_1.addLine(6.188, 9.028, 6.082, 9.532) +SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_22.startPoint()) +SketchArc_2 = Sketch_1.addArc(4.79378612024245, 9.263, 6.082, 9.532, 5.676067550792229, 10.23944020672391, False) +SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchArc_2.startPoint()) +SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 1.316) +SketchConstraintDistance_10 = Sketch_1.setDistance(SketchArc_2.startPoint(), SketchLine_1.result(), 0.106, True) +SketchLine_23 = Sketch_1.addLine(5.676067550792229, 10.23944020672391, 5.405090045827156, 10.43837553323928) +SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_23.startPoint()) +SketchLine_24 = Sketch_1.addLine(5.405090045827156, 10.43837553323928, 5.126644475052085, 10.62934617154252) +SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint()) +SketchLine_25 = Sketch_1.addLine(5.126644475052085, 10.62934617154252, 4.8355, 10.80033167999934) +SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint()) +SketchArc_3 = Sketch_1.addArc(0, 2.425, 4.8355, 10.80033167999934, 0, 12.096, False) +SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_3.center()) +SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchArc_3.startPoint()) +SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_3.endPoint()) +SketchLine_26 = Sketch_1.addLine(0, 12.096, 0, 12.26) +SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_26.startPoint()) +SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_26.endPoint()) +SketchConstraintDistance_11 = Sketch_1.setDistance(SketchArc_1.center(), SketchLine_12.result(), 2.425, True) +SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_1.center()) +SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_26.result(), 0.164) +SketchLine_27 = Sketch_1.addLine(0, 2.425, 4.9175, 10.94235984621998) +SketchLine_27.setAuxiliary(True) +SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_27.startPoint()) +SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_27.endPoint()) +SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_27.result()) +SketchLine_28 = Sketch_1.addLine(0, 2.425, 5.21991026555713, 10.77860263646605) +SketchLine_28.setAuxiliary(True) +SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_28.startPoint()) +SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_21.result()) +SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchLine_28.result(), SketchLine_25.startPoint()) +SketchLine_29 = Sketch_1.addLine(0, 2.425, 5.523638941362955, 10.61413149862094) +SketchLine_29.setAuxiliary(True) +SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_29.startPoint()) +SketchConstraintCoincidence_44 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_21.result()) +SketchConstraintCoincidence_45 = Sketch_1.setCoincident(SketchLine_29.result(), SketchLine_24.startPoint()) +SketchConstraintDistance_12 = Sketch_1.setDistance(SketchLine_25.startPoint(), SketchLine_28.endPoint(), 0.176, True) +SketchConstraintDistance_13 = Sketch_1.setDistance(SketchLine_24.startPoint(), SketchLine_29.endPoint(), 0.212, True) +SketchConstraintAngle_2 = Sketch_1.setAngle(SketchLine_28.result(), SketchLine_11.result(), 32, type = "Direct") +SketchConstraintAngle_3 = Sketch_1.setAngle(SketchLine_29.result(), SketchLine_11.result(), 34, type = "Direct") +SketchConstraintAngle_4 = Sketch_1.setAngle(SketchLine_27.result(), SketchLine_11.result(), 30, type = "Direct") +SketchLine_30 = Sketch_1.addLine(4.79378612024245, 9.263, 5.676067550792229, 10.23944020672391) +SketchLine_30.setAuxiliary(True) +SketchConstraintCoincidence_46 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_30.startPoint()) +SketchConstraintCoincidence_47 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_30.endPoint()) +SketchLine_31 = Sketch_1.addLine(4.79378612024245, 9.263, 4.79378612024245, 10.72808112087839) +SketchLine_31.setAuxiliary(True) +SketchConstraintCoincidence_48 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_31.startPoint()) +SketchConstraintVertical_10 = Sketch_1.setVertical(SketchLine_31.result()) +SketchConstraintAngle_5 = Sketch_1.setAngle(SketchLine_30.result(), SketchLine_31.result(), 42.1, type = "Direct") +SketchConstraintDistance_14 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_12.result(), 9.263, True) +SketchConstraintCoincidence_49 = Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchLine_27.result()) +SketchConstraintDistance_15 = Sketch_1.setDistance(SketchLine_22.endPoint(), SketchLine_12.result(), 9.532, True) +SketchConstraintDistance_16 = Sketch_1.setDistance(SketchLine_18.endPoint(), SketchLine_12.result(), 9.187, True) +SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 9.835) +model.do() +Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", (3.891, 0, 2.905000000000017))], model.selection("EDGE", "PartSet/OZ"), 360, 0) +Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) +SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX_5", (0, 0, 2.425)), False) +SketchPoint_1 = SketchProjection_3.createdFeature() +SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", (0, 0, 12.178)), False) +SketchLine_32 = SketchProjection_4.createdFeature() +SketchArc_4 = Sketch_2.addArc(0, 2.425, 0, 12.178, 5.453808387550563, 10.51060344512907, True) +SketchArc_4.setAuxiliary(True) +SketchConstraintCoincidence_50 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchArc_4.center()) +SketchConstraintCoincidence_51 = Sketch_2.setCoincident(SketchLine_32.result(), SketchArc_4.startPoint()) +SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", (2.761819470681477, 0, 6.519565749310471)), False) +SketchLine_33 = SketchProjection_5.createdFeature() +SketchConstraintCoincidence_52 = Sketch_2.setCoincident(SketchArc_4.endPoint(), SketchLine_33.result()) +SketchConstraintMiddle_3 = Sketch_2.setMiddlePoint(SketchArc_4.startPoint(), SketchLine_32.result()) +SketchLine_34 = Sketch_2.addLine(0, 2.425, 3.282538500974084, 11.74164236673399) +SketchLine_34.setAuxiliary(True) +SketchConstraintCoincidence_53 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_34.startPoint()) +SketchLine_35 = Sketch_2.addLine(3.282538500974084, 11.74164236673399, 3.199461499025965, 11.50584963625379) +SketchConstraintCoincidence_54 = Sketch_2.setCoincident(SketchLine_34.endPoint(), SketchLine_35.startPoint()) +SketchConstraintCoincidence_55 = Sketch_2.setCoincident(SketchLine_35.endPoint(), SketchLine_34.result()) +SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_35.result(), 0.25) +SketchPoint_2 = Sketch_2.addPoint(3.241, 11.6237460014939) +SketchConstraintCoincidence_56 = Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchArc_4.results()[1]) +SketchConstraintCoincidence_57 = Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchLine_35.result()) +SketchProjection_6 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_36 = SketchProjection_6.createdFeature() +SketchConstraintDistance_17 = Sketch_2.setDistance(SketchPoint_2.coordinates(), SketchLine_36.result(), 3.241, True) +SketchArc_5 = Sketch_2.addArc(0, 2.425, 3.282538500974084, 11.74164236673399, 4.1398177019328, 11.393656164374, True) +SketchConstraintCoincidence_58 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchArc_5.center()) +SketchConstraintCoincidence_59 = Sketch_2.setCoincident(SketchLine_34.endPoint(), SketchArc_5.startPoint()) +SketchArc_6 = Sketch_2.addArc(0, 2.425, 3.199461499025965, 11.50584963625379, 4.035044020470642, 11.16667053559353, True) +SketchConstraintCoincidence_60 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_33).startPoint(), SketchArc_6.center()) +SketchConstraintCoincidence_61 = Sketch_2.setCoincident(SketchLine_35.endPoint(), SketchArc_6.startPoint()) +SketchLine_37 = Sketch_2.addLine(0, 2.425, 3.911506014428326, 11.49555702253677) +SketchLine_37.setAuxiliary(True) +SketchConstraintCoincidence_62 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_37.startPoint()) +SketchConstraintCoincidence_63 = Sketch_2.setCoincident(SketchLine_37.endPoint(), SketchArc_5.results()[1]) +SketchLine_38 = Sketch_2.addLine(0, 2.425, 4.1398177019328, 11.393656164374) +SketchLine_38.setAuxiliary(True) +SketchConstraintCoincidence_64 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_38.startPoint()) +SketchConstraintCoincidence_65 = Sketch_2.setCoincident(SketchArc_5.endPoint(), SketchLine_38.endPoint()) +SketchConstraintCoincidence_66 = Sketch_2.setCoincident(SketchArc_6.endPoint(), SketchLine_38.result()) +SketchConstraintDistance_18 = Sketch_2.setDistance(SketchLine_35.startPoint(), SketchLine_37.result(), 0.675, True) +SketchConstraintMiddle_4 = Sketch_2.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_35.result()) +SketchLine_39 = Sketch_2.addLine(3.911506014428326, 11.49555702253677, 3.81251062025875, 11.26599240868435) +SketchConstraintCoincidence_67 = Sketch_2.setCoincident(SketchLine_37.endPoint(), SketchLine_39.startPoint()) +SketchConstraintCoincidence_68 = Sketch_2.setCoincident(SketchLine_39.endPoint(), SketchArc_6.results()[1]) +SketchConstraintCoincidence_69 = Sketch_2.setCoincident(SketchLine_39.endPoint(), SketchLine_37.result()) +SketchLine_40 = Sketch_2.addLine(4.1398177019328, 11.393656164374, 4.459277785066647, 11.19096067956113) +SketchConstraintCoincidence_70 = Sketch_2.setCoincident(SketchArc_5.endPoint(), SketchLine_40.startPoint()) +SketchProjection_7 = Sketch_2.addProjection(model.selection("EDGE_3", (2.545485308583308, 0, 11.92488050155302)), False) +SketchArc_7 = SketchProjection_7.createdFeature() +SketchConstraintCoincidence_71 = Sketch_2.setCoincident(SketchLine_40.endPoint(), SketchArc_7.results()[1]) +SketchLine_41 = Sketch_2.addLine(4.459277785066647, 11.19096067956113, 4.390495384356095, 11.04194790978503) +SketchConstraintCoincidence_72 = Sketch_2.setCoincident(SketchLine_40.endPoint(), SketchLine_41.startPoint()) +SketchProjection_8 = Sketch_2.addProjection(model.selection("EDGE_3", (2.503038985186497, 0, 11.76646866604162)), False) +SketchArc_8 = SketchProjection_8.createdFeature() +SketchConstraintCoincidence_73 = Sketch_2.setCoincident(SketchLine_41.endPoint(), SketchArc_8.results()[1]) +SketchLine_42 = Sketch_2.addLine(4.390495384356095, 11.04194790978503, 4.035044020470642, 11.16667053559353) +SketchConstraintCoincidence_74 = Sketch_2.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint()) +SketchConstraintCoincidence_75 = Sketch_2.setCoincident(SketchLine_42.endPoint(), SketchLine_38.result()) +SketchConstraintCoincidence_76 = Sketch_2.setCoincident(SketchLine_42.endPoint(), SketchArc_6.endPoint()) +SketchConstraintDistance_19 = Sketch_2.setDistance(SketchArc_5.endPoint(), SketchLine_41.result(), 0.375, True) +SketchConstraintDistance_20 = Sketch_2.setDistance(SketchLine_39.startPoint(), SketchLine_38.result(), 0.25, True) +SketchConstraintParallel_1 = Sketch_2.setParallel(SketchLine_41.result(), SketchLine_38.result()) +model.do() +Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("WIRE", (3.862008317343538, 0, 11.38077471561056))], model.selection("EDGE", (3.241000000000025, 0, 11.62374600149389)), 360, 0) +Revolution_3 = model.addRevolution(Part_1_doc, [model.selection("WIRE", (4.212769702413368, 0, 11.10430922268928))], model.selection("EDGE", (3.241000000000025, 0, 11.62374600149389)), 360, 0) +Symmetry_1 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", (3.237001631529592, 7.752869270149964e-17, 11.61239765963003)), model.selection("SOLID", (3.223059230627338, 1.806177914907969e-16, 11.57282573597984))], model.selection("FACE", "PartSet/YOZ"), True) +Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", (9.171993615882458e-05, 1.467829010982793e-16, 1.298864381774082))], [model.selection("COMPOUND", (0, 0, 11.60508262087049))]) +Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", (9.190387067667382e-05, -2.335384201710612e-09, 1.278348504308934)), model.selection("COMPOUND", (0, 0, 11.54608275997197))], removeEdges = True) +Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), 3.6, False) +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", (0, 0, 3.6))) +SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", (-6.188, 7.578114393123822e-16, -3.45)), True) +SketchCircle_1 = SketchProjection_9.createdFeature() +SketchProjection_10 = Sketch_3.addProjection(model.selection("EDGE", (-6.376, 7.808347991363525e-16, -2.25)), True) +SketchCircle_2 = SketchProjection_10.createdFeature() +SketchArc_9 = Sketch_3.addArc(0, 0, 6.094, 0, 5.859569950090201, -1.674, True) +SketchConstraintCoincidence_77 = Sketch_3.setCoincident(SketchAPI_Circle(SketchCircle_1).center(), SketchArc_9.center()) +SketchProjection_11 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_43 = SketchProjection_11.createdFeature() +SketchConstraintCoincidence_78 = Sketch_3.setCoincident(SketchArc_9.startPoint(), SketchLine_43.result()) +SketchPoint_3 = Sketch_3.addPoint(6.188, 0) +SketchConstraintCoincidence_79 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchLine_43.result()) +SketchConstraintCoincidence_80 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchCircle_1.results()[1]) +SketchConstraintDistance_21 = Sketch_3.setDistance(SketchArc_9.startPoint(), SketchPoint_3.coordinates(), 0.094, True) +SketchConstraintDistance_22 = Sketch_3.setDistance(SketchArc_9.endPoint(), SketchLine_43.result(), 1.674, True) +SketchLine_44 = Sketch_3.addLine(5.859569950090201, -1.674, 5.870724657144867, -1.956) +SketchConstraintCoincidence_81 = Sketch_3.setCoincident(SketchArc_9.endPoint(), SketchLine_44.startPoint()) +SketchConstraintCoincidence_82 = Sketch_3.setCoincident(SketchLine_44.endPoint(), SketchCircle_1.results()[1]) +SketchArc_10 = Sketch_3.addArc(0, 0, 6.47, 0, 6.167249305809295, -1.956, True) +SketchConstraintCoincidence_83 = Sketch_3.setCoincident(SketchAPI_Circle(SketchCircle_1).center(), SketchArc_10.center()) +SketchConstraintCoincidence_84 = Sketch_3.setCoincident(SketchLine_43.result(), SketchArc_10.startPoint()) +SketchLine_45 = Sketch_3.addLine(6.167249305809295, -1.956, 6.068561608816571, -1.956) +SketchConstraintCoincidence_85 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_45.startPoint()) +SketchConstraintCoincidence_86 = Sketch_3.setCoincident(SketchLine_45.endPoint(), SketchCircle_2.results()[1]) +SketchConstraintHorizontal_8 = Sketch_3.setHorizontal(SketchLine_45.result()) +SketchConstraintCoincidence_87 = Sketch_3.setCoincident(SketchLine_44.endPoint(), SketchLine_45.result()) +SketchConstraintDistance_23 = Sketch_3.setDistance(SketchArc_10.startPoint(), SketchLine_45.result(), 1.956, True) +SketchPoint_4 = Sketch_3.addPoint(6.376, 0) +SketchConstraintCoincidence_88 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchCircle_2.results()[1]) +SketchConstraintCoincidence_89 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchLine_43.result()) +SketchConstraintDistance_24 = Sketch_3.setDistance(SketchPoint_4.coordinates(), SketchArc_10.startPoint(), 0.094, True) +SketchConstraintMirror_1_objects = [SketchArc_9.results()[1], SketchLine_44.result(), SketchArc_10.results()[1], SketchLine_45.result()] +SketchConstraintMirror_1 = Sketch_3.addMirror(SketchLine_43.result(), SketchConstraintMirror_1_objects) +[SketchArc_11, SketchLine_46, SketchArc_12, SketchLine_47] = SketchConstraintMirror_1.mirrored() +model.do() +Sketch_3.changeFacesOrder([[SketchProjection_9.result(), SketchProjection_9.result(), SketchLine_46.result(), SketchArc_11.results()[1], SketchArc_9.results()[1], SketchLine_44.result()], + [SketchProjection_10.result(), SketchProjection_10.result(), SketchProjection_10.result(), SketchProjection_9.result(), SketchProjection_9.result(), SketchProjection_9.result()], + [SketchProjection_9.result(), SketchLine_44.result(), SketchArc_9.results()[1], SketchArc_11.results()[1], SketchLine_46.result()], + [SketchProjection_10.result(), SketchLine_45.result(), SketchArc_10.results()[1], SketchArc_12.results()[1], SketchLine_47.result(), SketchProjection_10.result()] + ]) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", (6.023784975045098, 0, 3.6)), model.selection("WIRE", (6.393864363926704, 0.9896456414839456, 3.6))], model.selection(), 0, 4.2) +Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("YOZ")) +SketchLine_48 = Sketch_4.addLine(0.75, 2.1, -0.75, 2.1) +SketchLine_49 = Sketch_4.addLine(-0.75, 2.1, -0.75, 0.3) +SketchLine_50 = Sketch_4.addLine(-0.75, 0.3, 0.75, 0.3) +SketchLine_51 = Sketch_4.addLine(0.75, 0.3, 0.75, 2.1) +SketchConstraintCoincidence_90 = Sketch_4.setCoincident(SketchLine_51.endPoint(), SketchLine_48.startPoint()) +SketchConstraintCoincidence_91 = Sketch_4.setCoincident(SketchLine_48.endPoint(), SketchLine_49.startPoint()) +SketchConstraintCoincidence_92 = Sketch_4.setCoincident(SketchLine_49.endPoint(), SketchLine_50.startPoint()) +SketchConstraintCoincidence_93 = Sketch_4.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint()) +SketchConstraintHorizontal_9 = Sketch_4.setHorizontal(SketchLine_48.result()) +SketchConstraintVertical_11 = Sketch_4.setVertical(SketchLine_49.result()) +SketchConstraintHorizontal_10 = Sketch_4.setHorizontal(SketchLine_50.result()) +SketchConstraintVertical_12 = Sketch_4.setVertical(SketchLine_51.result()) +SketchProjection_12 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OY"), False) +SketchLine_52 = SketchProjection_12.createdFeature() +SketchConstraintDistance_25 = Sketch_4.setDistance(SketchLine_52.result(), SketchLine_50.endPoint(), 0.3, True) +SketchConstraintDistance_26 = Sketch_4.setDistance(SketchLine_51.endPoint(), SketchLine_52.result(), 2.1, True) +SketchPoint_5 = Sketch_4.addPoint(0, 2.1) +SketchConstraintCoincidence_94 = Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_48.result()) +SketchConstraintMiddle_5 = Sketch_4.setMiddlePoint(SketchLine_48.result(), SketchPoint_5.coordinates()) +SketchProjection_13 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_53 = SketchProjection_13.createdFeature() +SketchConstraintCoincidence_95 = Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_53.result()) +SketchConstraintDistance_27 = Sketch_4.setDistance(SketchPoint_5.coordinates(), SketchLine_51.endPoint(), 0.75, True) +model.do() +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", (0, 0, 1.2))], model.selection(), 10, 0) +Rotation_1_objects = [model.selection("SOLID", (5, 1.166200656118862e-18, 1.2)), model.selection("SOLID", (6.038396788450424, -2.054057850558325e-15, 1.5)), model.selection("SOLID", (6.316150725419533, -7.758519898162708e-14, 1.5))] +Rotation_1 = model.addRotation(Part_1_doc, Rotation_1_objects, model.selection("EDGE", "PartSet/OZ"), -90) +Fuse_2_objects_1 = [model.selection("SOLID", (9.187239971515918e-05, -6.832080613557312e-09, 1.282177819724956)), model.selection("SOLID", (-1.349638054860434e-15, -6.038396788450424, 1.5)), model.selection("SOLID", (-7.680624658573511e-14, -6.316150725419533, 1.5))] +Fuse_2 = model.addFuse(Part_1_doc, Fuse_2_objects_1) +Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", (9.177890659903279e-05, -0.006341145656800184, 1.28239948002437))], [model.selection("SOLID", (6.393306363619619e-16, -4.999999999999998, 1.2))]) +FusionFaces_1 = model.addFusionFaces(Part_1_doc, model.selection("SOLID", (9.190526314899106e-05, 0.002297421001363739, 1.282512923455053))) + +model.end() + +model.testNbResults(FusionFaces_1, 1) +model.testNbSubResults(FusionFaces_1, [0]) +model.testNbSubShapes(FusionFaces_1, GeomAPI_Shape.SOLID, [1]) +model.testNbSubShapes(FusionFaces_1, GeomAPI_Shape.FACE, [47]) +model.testNbSubShapes(FusionFaces_1, GeomAPI_Shape.EDGE, [202]) +model.testNbSubShapes(FusionFaces_1, GeomAPI_Shape.VERTEX, [404]) +model.testResultsVolumes(FusionFaces_1, [612.7268292882] + +assert(model.checkPythonDump()) \ No newline at end of file