From: azv Date: Mon, 13 May 2019 12:39:51 +0000 (+0300) Subject: Task 3.2. Concealment into multi-level Compounds X-Git-Tag: VEDF2019Lot4~101^2~78 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=2464920c872a18d9889d7411ba453320cc425b85;p=modules%2Fshaper.git Task 3.2. Concealment into multi-level Compounds Update behavior of SPLIT operation to keep hierarchy of compounds. --- diff --git a/src/FeaturesAPI/FeaturesAPI_BooleanFill.cpp b/src/FeaturesAPI/FeaturesAPI_BooleanFill.cpp index 2a832ec6f..511a7f56d 100644 --- a/src/FeaturesAPI/FeaturesAPI_BooleanFill.cpp +++ b/src/FeaturesAPI/FeaturesAPI_BooleanFill.cpp @@ -35,10 +35,12 @@ FeaturesAPI_BooleanFill::FeaturesAPI_BooleanFill( FeaturesAPI_BooleanFill::FeaturesAPI_BooleanFill( const std::shared_ptr& theFeature, const std::list& theMainObjects, - const std::list& theToolObjects) + const std::list& theToolObjects, + const int theVersion) : ModelHighAPI_Interface(theFeature) { if(initialize()) { + fillAttribute(theVersion, theFeature->integer(FeaturesPlugin_Boolean::VERSION_ID())); fillAttribute(theMainObjects, mymainObjects); fillAttribute(theToolObjects, mytoolObjects); @@ -82,17 +84,26 @@ void FeaturesAPI_BooleanFill::dump(ModelHighAPI_Dumper& theDumper) const aBase->selectionList(FeaturesPlugin_BooleanFill::OBJECT_LIST_ID()); AttributeSelectionListPtr aTools = aBase->selectionList(FeaturesPlugin_BooleanFill::TOOL_LIST_ID()); + AttributeIntegerPtr aVersion = + aBase->integer(FeaturesPlugin_BooleanFill::VERSION_ID()); + + theDumper << "(" << aDocName << ", " << anObjects << ", " << aTools; + + if (aVersion && aVersion->isInitialized()) + theDumper << ", " << aVersion->value(); - theDumper << "(" << aDocName << ", " << anObjects << ", " << aTools << ")" << std::endl; + theDumper << ")" << std::endl; } //================================================================================================== BooleanFillPtr addSplit(const std::shared_ptr& thePart, const std::list& theMainObjects, - const std::list& theToolObjects) + const std::list& theToolObjects, + const int theVersion) { std::shared_ptr aFeature = thePart->addFeature(FeaturesAPI_BooleanFill::ID()); return BooleanFillPtr(new FeaturesAPI_BooleanFill(aFeature, theMainObjects, - theToolObjects)); + theToolObjects, + theVersion)); } diff --git a/src/FeaturesAPI/FeaturesAPI_BooleanFill.h b/src/FeaturesAPI/FeaturesAPI_BooleanFill.h index 75f075a2e..2826fe9e8 100644 --- a/src/FeaturesAPI/FeaturesAPI_BooleanFill.h +++ b/src/FeaturesAPI/FeaturesAPI_BooleanFill.h @@ -44,7 +44,8 @@ public: FEATURESAPI_EXPORT FeaturesAPI_BooleanFill(const std::shared_ptr& theFeature, const std::list& theMainObjects, - const std::list& theToolObjects); + const std::list& theToolObjects, + const int theVersion = 0); /// Destructor. FEATURESAPI_EXPORT @@ -77,6 +78,7 @@ typedef std::shared_ptr BooleanFillPtr; FEATURESAPI_EXPORT BooleanFillPtr addSplit(const std::shared_ptr& thePart, const std::list& theMainObjects, - const std::list& theToolObjects); + const std::list& theToolObjects, + const int theVersion = 0); #endif // FeaturesAPI_BooleanFill_H_ diff --git a/src/FeaturesPlugin/CMakeLists.txt b/src/FeaturesPlugin/CMakeLists.txt index ac313d386..d70e298ea 100644 --- a/src/FeaturesPlugin/CMakeLists.txt +++ b/src/FeaturesPlugin/CMakeLists.txt @@ -480,6 +480,9 @@ ADD_UNIT_TESTS(TestExtrusion.py TestBooleanSmash_MultiLevelCompound_v0_2.py TestBooleanSmash_MultiLevelCompound_v20190506_1.py TestBooleanSmash_MultiLevelCompound_v20190506_2.py - TestBooleanSplit_MultiLevelCompound0.py + TestBooleanSplit_MultiLevelCompound_v0_1.py + TestBooleanSplit_MultiLevelCompound_v0_2.py + TestBooleanSplit_MultiLevelCompound_v20190506_1.py + TestBooleanSplit_MultiLevelCompound_v20190506_2.py TestPartition_MultiLevelCompound0.py ) diff --git a/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.cpp b/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.cpp index a907823ad..94630430f 100644 --- a/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.cpp +++ b/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.cpp @@ -40,12 +40,21 @@ #include #include +static const int THE_SPLIT_VERSION_1 = 20190506; + //================================================================================================= FeaturesPlugin_BooleanFill::FeaturesPlugin_BooleanFill() : FeaturesPlugin_Boolean(FeaturesPlugin_Boolean::BOOL_FILL) { } +//================================================================================================== +void FeaturesPlugin_BooleanFill::initAttributes() +{ + FeaturesPlugin_Boolean::initAttributes(); + initVersion(THE_SPLIT_VERSION_1); +} + //================================================================================================= void FeaturesPlugin_BooleanFill::execute() { @@ -71,9 +80,21 @@ void FeaturesPlugin_BooleanFill::execute() return; } + // version of Split feature + int aSplitVersion = version(); + std::vector aResultBaseAlgoList; ListOfShape aResultShapesList; + std::shared_ptr aMakeShapeList(new GeomAlgoAPI_MakeShapeList()); + + GeomShapePtr aResultCompound; + if (aSplitVersion == THE_SPLIT_VERSION_1) { + // merge hierarchies of compounds containing objects and tools + aResultCompound = + keepUnusedSubsOfCompound(GeomShapePtr(), anObjects, aTools, aMakeShapeList); + } + // For solids cut each object with all tools. bool isOk = true; for (ObjectHierarchy::Iterator anObjectsIt = anObjects.Begin(); @@ -88,21 +109,52 @@ void FeaturesPlugin_BooleanFill::execute() // compsolid handling isOk = processCompsolid(GeomAlgoAPI_Tools::BOOL_PARTITION, anObjects, aParent, aTools.Objects(), aPlanes, - aResultIndex, aResultBaseAlgoList, aResultShapesList); + aResultIndex, aResultBaseAlgoList, aResultShapesList, + aResultCompound); } else { // process object as is isOk = processObject(GeomAlgoAPI_Tools::BOOL_PARTITION, anObject, aTools.Objects(), aPlanes, - aResultIndex, aResultBaseAlgoList, aResultShapesList); + aResultIndex, aResultBaseAlgoList, aResultShapesList, + aResultCompound); + } + } + + GeomAPI_ShapeIterator aShapeIt(aResultCompound); + if (aShapeIt.more()) { + std::shared_ptr aResultBody = + document()->createBody(data(), aResultIndex); + + ListOfShape anObjectList = anObjects.Objects(); + ListOfShape aToolsList = aTools.Objects(); + FeaturesPlugin_Tools::loadModifiedShapes(aResultBody, + anObjectList, + aToolsList, + aMakeShapeList, + aResultCompound); + setResult(aResultBody, aResultIndex++); + + // merge algorithms + FeaturesPlugin_Tools::ResultBaseAlgo aRBA; + aRBA.resultBody = aResultBody; + aRBA.baseShape = anObjectList.front(); + for (std::vector::iterator + aRBAIt = aResultBaseAlgoList.begin(); + aRBAIt != aResultBaseAlgoList.end(); ++aRBAIt) { + aMakeShapeList->appendAlgo(aRBAIt->makeShape); } + aRBA.makeShape = aMakeShapeList; + aResultBaseAlgoList.clear(); + aResultBaseAlgoList.push_back(aRBA); } // Store deleted shapes after all results has been proceeded. This is to avoid issue when in one // result shape has been deleted, but in another it was modified or stayed. - GeomShapePtr aResultShapesCompound = GeomAlgoAPI_CompoundBuilder::compound(aResultShapesList); + if (!aResultCompound) + aResultCompound = GeomAlgoAPI_CompoundBuilder::compound(aResultShapesList); FeaturesPlugin_Tools::loadDeletedShapes(aResultBaseAlgoList, aTools.Objects(), - aResultShapesCompound); + aResultCompound); // remove the rest results if there were produced in the previous pass removeResults(aResultIndex); diff --git a/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.h b/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.h index 8e26cfa98..386cb6ec6 100644 --- a/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.h +++ b/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.h @@ -43,6 +43,9 @@ public: return MY_KIND; } + /// Request for initialization of data model of the feature: adding all attributes. + FEATURESPLUGIN_EXPORT virtual void initAttributes(); + /// Creates a new part document if needed. FEATURESPLUGIN_EXPORT virtual void execute(); diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound0.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound0.py deleted file mode 100644 index b621810ef..000000000 --- a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound0.py +++ /dev/null @@ -1,92 +0,0 @@ -# Copyright (C) 2014-2019 CEA/DEN, EDF R&D -# -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License, or (at your option) any later version. -# -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com -# - -from SketchAPI import * - -from salome.shaper import model - -model.begin() -partSet = model.moduleDocument() -Part_1 = model.addPart(partSet) -Part_1_doc = Part_1.document() -Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20) -LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2) -LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) -LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0) -LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0) -LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255) -LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255) -Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) -SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0) -SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5) -SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5) -SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0) -SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) -SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) -SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) -SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) -SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) -SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) -SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) -SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) -SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False) -SketchLine_5 = SketchProjection_1.createdFeature() -SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True) -SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result()) -SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14) -SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5) -SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12) -SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15) -SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15) -SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12) -SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint()) -SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) -SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint()) -SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) -SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result()) -SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result()) -SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result()) -SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result()) -SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3) -SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10) -SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True) -SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True) -model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20) -Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15) -LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) -AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) -Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) -Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0) -Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0) -Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0) -Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0) -Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("COMPOUND", "Compound_1_1_2")]) -model.do() -model.end() - -from GeomAPI import GeomAPI_Shape - -model.testNbResults(Split_1, 1) -model.testNbSubResults(Split_1, [6]) -model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [6]) -model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [52]) -model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [226]) -model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [452]) -model.testResultsVolumes(Split_1, [6283.185307194357847038190811872]) diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_1.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_1.py new file mode 100644 index 000000000..baecd5c70 --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_1.py @@ -0,0 +1,96 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2) +LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0) +LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0) +LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255) +LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0) +SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5) +SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5) +SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_5 = SketchProjection_1.createdFeature() +SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result()) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5) +SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12) +SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15) +SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15) +SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint()) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint()) +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result()) +SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result()) +SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3) +SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10) +SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True) +SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15) +LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) +Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0) +Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0) +Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0) +Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0) +Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("COMPOUND", "Compound_1_1_2")]) + +model.testHaveNamingSubshapes(Split_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Split_1, 1) +model.testNbSubResults(Split_1, [6]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [6]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [52]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [226]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [452]) +model.testResultsVolumes(Split_1, [6283.185307194357847038190811872]) + +assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_2.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_2.py new file mode 100644 index 000000000..e4815660c --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_2.py @@ -0,0 +1,121 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_1 = SketchProjection_1.createdFeature() +SketchCircle_1 = Sketch_1.addCircle(0, 0, 10) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_1.center()) +SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 10) +SketchCircle_2 = Sketch_1.addCircle(10, 0, 10) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_2.center()) +SketchConstraintEqual_1 = Sketch_1.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1]) +SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_2.center(), 10) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 20, 0) +Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False) +SketchLine_2 = SketchProjection_2.createdFeature() +SketchCircle_3 = Sketch_2.addCircle(0, -7, 10) +SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.result(), SketchCircle_3.center()) +SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_3.results()[1], 10) +SketchConstraintDistanceVertical_1 = Sketch_2.setVerticalDistance(SketchCircle_3.center(), SketchAPI_Line(SketchLine_2).startPoint(), 7) +SketchCircle_4 = Sketch_2.addCircle(40, -27, 10) +SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_4.results()[1], SketchCircle_3.results()[1]) +SketchConstraintDistanceHorizontal_2 = Sketch_2.setHorizontalDistance(SketchCircle_3.center(), SketchCircle_4.center(), 40) +SketchConstraintDistanceVertical_2 = Sketch_2.setVerticalDistance(SketchCircle_4.center(), SketchCircle_3.center(), 20) +model.do() +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 20, 0) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")]) +Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPSOLID", "Extrusion_1_1")]) +Compound_2.result().subResult(0).setColor(255, 170, 0) +Compound_2.result().subResult(0).subResult(0).setColor(255, 170, 0) +Compound_2.result().subResult(0).subResult(1).setColor(255, 170, 0) +Compound_2.result().subResult(1).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(0).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(1).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(2).setColor(0, 85, 255) +Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_3 = Sketch_3.addLine(7, 0, -7, 0) +SketchLine_4 = Sketch_3.addLine(-7, 0, -7, 5) +SketchLine_5 = Sketch_3.addLine(-7, 5, 7, 5) +SketchLine_6 = Sketch_3.addLine(7, 5, 7, 0) +SketchConstraintCoincidence_4 = Sketch_3.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_5 = Sketch_3.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintCoincidence_6 = Sketch_3.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint()) +SketchConstraintCoincidence_7 = Sketch_3.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchConstraintHorizontal_1 = Sketch_3.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_1 = Sketch_3.setVertical(SketchLine_4.result()) +SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_5.result()) +SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_6.result()) +SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_7 = SketchProjection_3.createdFeature() +SketchConstraintDistance_1 = Sketch_3.setDistance(SketchLine_5.endPoint(), SketchLine_7.result(), 7, True) +SketchConstraintMiddle_1 = Sketch_3.setMiddlePoint(SketchAPI_Line(SketchLine_7).startPoint(), SketchLine_3.result()) +SketchConstraintLength_1 = Sketch_3.setLength(SketchLine_4.result(), 5) +SketchLine_8 = Sketch_3.addLine(7, 7, -7.000000000000001, 7) +SketchLine_9 = Sketch_3.addLine(-7.000000000000001, 7, -7.000000000000001, 10) +SketchLine_10 = Sketch_3.addLine(-7.000000000000001, 10, 7, 10) +SketchLine_11 = Sketch_3.addLine(7, 10, 7, 7) +SketchConstraintCoincidence_8 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint()) +SketchConstraintCoincidence_9 = Sketch_3.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint()) +SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint()) +SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_8.result()) +SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_9.result()) +SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_10.result()) +SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result()) +SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchLine_4.result()) +SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_8.startPoint(), SketchLine_6.result()) +SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_9.result(), 3) +SketchConstraintDistance_2 = Sketch_3.setDistance(SketchLine_9.startPoint(), SketchLine_5.result(), 2, True) +model.do() +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r")], model.selection(), 50, -10) +Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r")], model.selection(), 60, 20) +AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) +Compound_3 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) +Compound_3.result().subResult(0).setColor(0, 170, 0) +Compound_3.result().subResult(1).setColor(0, 255, 0) +Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0) +Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0) +Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("COMPOUND", "Compound_3_1_2")]) + +model.testHaveNamingSubshapes(Split_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Split_1, 2) +model.testNbSubResults(Split_1, [5, 7]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [5, 7]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [37, 56]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [148, 250]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [296, 500]) +model.testResultsVolumes(Split_1, [6283.185307174889203452, 10109.63121762967239192]) + +assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_1.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_1.py new file mode 100644 index 000000000..68c0cff7a --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_1.py @@ -0,0 +1,96 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2) +LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0) +LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0) +LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255) +LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0) +SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5) +SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5) +SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_5 = SketchProjection_1.createdFeature() +SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result()) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5) +SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12) +SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15) +SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15) +SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint()) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint()) +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result()) +SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result()) +SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3) +SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10) +SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True) +SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15) +LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) +Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0) +Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0) +Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0) +Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0) +Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("COMPOUND", "Compound_1_1_2")], 20190506) + +model.testHaveNamingSubshapes(Split_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Split_1, 1) +model.testNbSubResults(Split_1, [4]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [11]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [73]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [292]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [584]) +model.testResultsVolumes(Split_1, [36332.7412287331171683]) + +assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_2.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_2.py new file mode 100644 index 000000000..bee85a528 --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_2.py @@ -0,0 +1,121 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_1 = SketchProjection_1.createdFeature() +SketchCircle_1 = Sketch_1.addCircle(0, 0, 10) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_1.center()) +SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 10) +SketchCircle_2 = Sketch_1.addCircle(10, 0, 10) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_2.center()) +SketchConstraintEqual_1 = Sketch_1.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1]) +SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_2.center(), 10) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 20, 0) +Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False) +SketchLine_2 = SketchProjection_2.createdFeature() +SketchCircle_3 = Sketch_2.addCircle(0, -7, 10) +SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.result(), SketchCircle_3.center()) +SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_3.results()[1], 10) +SketchConstraintDistanceVertical_1 = Sketch_2.setVerticalDistance(SketchCircle_3.center(), SketchAPI_Line(SketchLine_2).startPoint(), 7) +SketchCircle_4 = Sketch_2.addCircle(40, -27, 10) +SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_4.results()[1], SketchCircle_3.results()[1]) +SketchConstraintDistanceHorizontal_2 = Sketch_2.setHorizontalDistance(SketchCircle_3.center(), SketchCircle_4.center(), 40) +SketchConstraintDistanceVertical_2 = Sketch_2.setVerticalDistance(SketchCircle_4.center(), SketchCircle_3.center(), 20) +model.do() +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 20, 0) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")]) +Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPSOLID", "Extrusion_1_1")]) +Compound_2.result().subResult(0).setColor(255, 170, 0) +Compound_2.result().subResult(0).subResult(0).setColor(255, 170, 0) +Compound_2.result().subResult(0).subResult(1).setColor(255, 170, 0) +Compound_2.result().subResult(1).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(0).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(1).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(2).setColor(0, 85, 255) +Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_3 = Sketch_3.addLine(7, 0, -7, 0) +SketchLine_4 = Sketch_3.addLine(-7, 0, -7, 5) +SketchLine_5 = Sketch_3.addLine(-7, 5, 7, 5) +SketchLine_6 = Sketch_3.addLine(7, 5, 7, 0) +SketchConstraintCoincidence_4 = Sketch_3.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_5 = Sketch_3.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintCoincidence_6 = Sketch_3.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint()) +SketchConstraintCoincidence_7 = Sketch_3.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchConstraintHorizontal_1 = Sketch_3.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_1 = Sketch_3.setVertical(SketchLine_4.result()) +SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_5.result()) +SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_6.result()) +SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_7 = SketchProjection_3.createdFeature() +SketchConstraintDistance_1 = Sketch_3.setDistance(SketchLine_5.endPoint(), SketchLine_7.result(), 7, True) +SketchConstraintMiddle_1 = Sketch_3.setMiddlePoint(SketchAPI_Line(SketchLine_7).startPoint(), SketchLine_3.result()) +SketchConstraintLength_1 = Sketch_3.setLength(SketchLine_4.result(), 5) +SketchLine_8 = Sketch_3.addLine(7, 7, -7.000000000000001, 7) +SketchLine_9 = Sketch_3.addLine(-7.000000000000001, 7, -7.000000000000001, 10) +SketchLine_10 = Sketch_3.addLine(-7.000000000000001, 10, 7, 10) +SketchLine_11 = Sketch_3.addLine(7, 10, 7, 7) +SketchConstraintCoincidence_8 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint()) +SketchConstraintCoincidence_9 = Sketch_3.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint()) +SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint()) +SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_8.result()) +SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_9.result()) +SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_10.result()) +SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result()) +SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchLine_4.result()) +SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_8.startPoint(), SketchLine_6.result()) +SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_9.result(), 3) +SketchConstraintDistance_2 = Sketch_3.setDistance(SketchLine_9.startPoint(), SketchLine_5.result(), 2, True) +model.do() +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r")], model.selection(), 50, -10) +Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r")], model.selection(), 60, 20) +AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) +Compound_3 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) +Compound_3.result().subResult(0).setColor(0, 170, 0) +Compound_3.result().subResult(1).setColor(0, 255, 0) +Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0) +Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0) +Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("COMPOUND", "Compound_3_1_2")], 20190506) + +model.testHaveNamingSubshapes(Split_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Split_1, 1) +model.testNbSubResults(Split_1, [4]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [14]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [102]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [428]) +model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [856]) +model.testResultsVolumes(Split_1, [25476.0018319841583434]) + +assert(model.checkPythonDump())