From: dbv Date: Mon, 20 Aug 2018 13:19:24 +0000 (+0300) Subject: Revert test name. X-Git-Tag: SHAPER_V9_1_0RC1~58 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=234107203152b32e9c4e343250205bce4a72b789;p=modules%2Fshaper.git Revert test name. --- diff --git a/src/FeaturesPlugin/Test/Test2394.py b/src/FeaturesPlugin/Test/Test2394.py new file mode 100644 index 000000000..13639bba7 --- /dev/null +++ b/src/FeaturesPlugin/Test/Test2394.py @@ -0,0 +1,258 @@ +# -*- coding: utf-8 -*- + +## Copyright (C) 2018-20xx CEA/DEN, EDF R&D +## +## This library is free software; you can redistribute it and/or +## modify it under the terms of the GNU Lesser General Public +## License as published by the Free Software Foundation; either +## version 2.1 of the License, or (at your option) any later version. +## +## This library is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +## Lesser General Public License for more details. +## +## You should have received a copy of the GNU Lesser General Public +## License along with this library; if not, write to the Free Software +## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +## +## See http:##www.salome-platform.org/ or +## email : webmaster.salome@opencascade.com +## + +from GeomAPI import * +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() + +model.addParameter(Part_1_doc, "R", "58") +model.addParameter(Part_1_doc, "cote_cube", "R/2") +model.addParameter(Part_1_doc, "theta", "54") +model.addParameter(Part_1_doc, "phi", "36") +model.addParameter(Part_1_doc, "pi", "3.141592653589793") +model.addParameter(Part_1_doc, "x", "R*sin(phi/180*pi)*cos(theta/180*pi)") +model.addParameter(Part_1_doc, "y", "R*sin(phi/180*pi)*sin(theta/180*pi)") +model.addParameter(Part_1_doc, "z", "R*cos(phi/180*pi)") +model.addParameter(Part_1_doc, "haut_ext_tuyau", "5") +model.addParameter(Part_1_doc, "haut_int_tuyau", "14") +Param_Diam = model.addParameter(Part_1_doc, "diam_tuyau", "10") + +Revolution_1 = model.addRevolution(Part_1_doc, [], model.selection("EDGE", "PartSet/OZ"), 90, 0) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) +SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False) +SketchPoint_1 = SketchProjection_1.createdFeature() +SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_1 = SketchProjection_2.createdFeature() +SketchArc_1 = Sketch_1.addArc(0, 0, 58, 0, 0, -58, True) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.startPoint()) +SketchLine_2 = Sketch_1.addLine(0, -58, 0, 0) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_2.endPoint()) +SketchLine_3 = Sketch_1.addLine(0, 0, 58, 0) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), "R") +Revolution_1.setNestedSketch(Sketch_1) + +Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 0, "cote_cube") +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_2")) +SketchLine_4 = Sketch_2.addLine(29, 0, 0, 0) +SketchLine_5 = Sketch_2.addLine(0, 0, 0, 29) +SketchLine_6 = Sketch_2.addLine(0, 29, 29, 29) +SketchLine_7 = Sketch_2.addLine(29, 29, 29, 0) +SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_4.startPoint()) +SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint()) +SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_4.result()) +SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_5.result()) +SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_6.result()) +SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result()) +SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_6.result(), "cote_cube") +SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_6.result(), SketchLine_7.result()) +SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/To_Face_1"), False) +SketchLine_8 = SketchProjection_3.createdFeature() +SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_8.result()) +SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/From_Face_1"), False) +SketchLine_9 = SketchProjection_4.createdFeature() +SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.result()) +Extrusion_1.setNestedSketch(Sketch_2) + +Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1")]) + +Point_2 = model.addPoint(Part_1_doc, "x", "y", "-z") +Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "Fill_1_1_2/Modified_Face_3&Fill_1_1_2/Modified_Face_2&Fill_1_1_2/Modified_Face_1")) +Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Point_1"), True) +Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "haut_ext_tuyau", True) +Plane_5.result().setName("Plane_2 arrivee tuyau") +Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"), 45) +Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_1"), 45) +Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"), "90+45") + +Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_1_1_1")], [model.selection("FACE", "Plane_5")]) +Fill_3 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_2_1_2")], [model.selection("FACE", "Plane_3")]) +Fill_4 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_3_1_2")], [model.selection("FACE", "Plane_4")]) +Fill_4.result().setColor(102, 51, 51) +Fill_4.result().subResult(0).setColor(153, 153, 76) +Fill_4.result().subResult(1).setColor(0, 204, 204) +Fill_4.result().subResult(2).setColor(51, 51, 102) +Fill_4.result().subResult(3).setColor(102, 204, 102) +Fill_4.result().subResult(4).setColor(204, 204, 0) + +Union_1 = model.addUnion(Part_1_doc, [model.selection("SOLID", "Fill_4_1_4"), model.selection("SOLID", "Fill_4_1_2")]) + +Point_3 = model.addPoint(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("FACE", "Plane_2 arrivee tuyau")) + +Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2 arrivee tuyau")) +SketchProjection_5 = Sketch_3.addProjection(model.selection("VERTEX", "Point_2"), False) +SketchPoint_2 = SketchProjection_5.createdFeature() +SketchCircle_1 = Sketch_3.addCircle(0, 0, 10) +SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchPoint_2.result(), SketchCircle_1.center()) +SketchConstraintRadius_1 = Sketch_3.setRadius(SketchCircle_1.results()[1], "diam_tuyau") +SketchLine_10 = Sketch_3.addLine(-5, 5, 5, 5) +SketchLine_11 = Sketch_3.addLine(5, 5, 5, -5) +SketchLine_12 = Sketch_3.addLine(5, -5, -5, -5) +SketchLine_13 = Sketch_3.addLine(-5, -5, -5, 5) +SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_10.startPoint()) +SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint()) +SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint()) +SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint()) +SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_10.result()) +SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result()) +SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_12.result()) +SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_13.result()) +SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_10.result(), SketchLine_13.result()) +SketchLine_14 = Sketch_3.addLine(5, 5, 7.071067811865479, 7.071067811865475) +SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_14.startPoint()) +SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchCircle_1.results()[1]) +SketchLine_15 = Sketch_3.addLine(-5, -5, -7.071067811865472, -7.071067811865476) +SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint()) +SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchCircle_1.results()[1]) +SketchConstraintCollinear_1 = Sketch_3.setCollinear(SketchLine_14.result(), SketchLine_15.result()) +SketchLine_16 = Sketch_3.addLine(7.071067811865478, -7.071067811865476, 5, -5) +SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchCircle_1.results()[1]) +SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_16.endPoint()) +SketchLine_17 = Sketch_3.addLine(-5, 5, -7.071067811865472, 7.071067811865476) +SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_10.startPoint(), SketchLine_17.startPoint()) +SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_17.endPoint(), SketchCircle_1.results()[1]) +SketchConstraintCollinear_2 = Sketch_3.setCollinear(SketchLine_17.result(), SketchLine_16.result()) +SketchConstraintEqual_3 = Sketch_3.setEqual(SketchLine_14.result(), SketchLine_15.result()) +SketchConstraintEqual_4 = Sketch_3.setEqual(SketchLine_17.result(), SketchLine_16.result()) +SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_10.result(), "diam_tuyau") +model.do() + +Extrusion_2_objects = [model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_11f-SketchLine_14r-SketchLine_16r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_10f-SketchLine_14f-SketchLine_17r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_13f-SketchLine_15r-SketchLine_17f"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_12f-SketchLine_15f-SketchLine_16f")] +Extrusion_2 = model.addExtrusion(Part_1_doc, Extrusion_2_objects, model.selection(), 10, 0) +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_13r")], model.selection(), "haut_int_tuyau", 0) + +Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_3")) +SketchProjection_6 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), False) +SketchPoint_3 = SketchProjection_6.createdFeature() +SketchProjection_7 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), False) +SketchPoint_4 = SketchProjection_7.createdFeature() +SketchArc_2 = Sketch_4.addArc(0, 0, -7.071067811865476, -7.071067811865472, 7.071067811865476, 7.071067811865472, True) +SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchPoint_3.result(), SketchArc_2.startPoint()) +SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchArc_2.results()[1]) +SketchLine_18 = Sketch_4.addLine(7.071067811865476, 7.071067811865472, -7.071067811865476, -7.071067811865472) +SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchLine_18.startPoint()) +SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_18.endPoint()) +SketchProjection_8 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), False) +SketchPoint_5 = SketchProjection_8.createdFeature() +SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchAPI_Point(SketchPoint_5).coordinates()) +model.do() + +Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchArc_2_2f-SketchLine_18r")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_18"), 0, 180) + +Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_2_1")], [model.selection("SOLID", "Extrusion_3_1")]) +Cut_1.result().setName("demi-sphere") + +Plane_9 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/From_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_10&Extrusion_2_1/To_Face_4")) +Plane_10 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_12&Extrusion_2_1/Generated_Face_11&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/From_Face_1")) +Plane_11 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/From_Face_3")) +Plane_12 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/From_Face_4")) + +Recover_1 = model.addRecover(Part_1_doc, Cut_1, [Extrusion_3.result()]) + +Plane_13 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape4"), model.selection("EDGE", "Recover_1_1/Shape4&Recover_1_1/Shape6"), "90+45") +Plane_14 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape1"), model.selection("EDGE", "Recover_1_1/Shape1&Recover_1_1/Shape6"), "90+45") +Plane_15 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape2"), model.selection("EDGE", "Recover_1_1/Shape2&Recover_1_1/Shape6"), "90+45") +Plane_16 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape6"), model.selection("EDGE", "Recover_1_1/Shape3&Recover_1_1/Shape6"), 45) + +Fill_5_objects_2 = [model.selection("FACE", "Plane_6"), model.selection("FACE", "Plane_7"), model.selection("FACE", "Plane_8"), model.selection("FACE", "Plane_9"), model.selection("FACE", "Plane_10"), model.selection("FACE", "Plane_11"), model.selection("FACE", "Plane_12"), model.selection("FACE", "Plane_13")] +Fill_5 = model.addFill(Part_1_doc, [model.selection("SOLID", "demi-sphere")], Fill_5_objects_2) + +Union_2_objects = [model.selection("SOLID", "Fill_5_1_14"), model.selection("SOLID", "Fill_5_1_15"), model.selection("SOLID", "Fill_5_1_16")] +Union_2 = model.addUnion(Part_1_doc, Union_2_objects) +Union_3_objects = [model.selection("SOLID", "Fill_5_1_8/Fill_5_1_8"), model.selection("SOLID", "Fill_5_1_4/Fill_5_1_4"), model.selection("SOLID", "Fill_5_1_9/Fill_5_1_9"), model.selection("SOLID", "Fill_5_1_11/Fill_5_1_11")] +Union_3 = model.addUnion(Part_1_doc, Union_3_objects) +Union_4_objects = [model.selection("SOLID", "Fill_5_1_6/Fill_5_1_6"), model.selection("SOLID", "Fill_5_1_10/Fill_5_1_10"), model.selection("SOLID", "Fill_5_1_13/Fill_5_1_13")] +Union_4 = model.addUnion(Part_1_doc, Union_4_objects) +Union_5_objects = [model.selection("SOLID", "Fill_5_1_2/Fill_5_1_2"), model.selection("SOLID", "Fill_5_1_1/Fill_5_1_1"), model.selection("SOLID", "Fill_5_1_3/Fill_5_1_3")] +Union_5 = model.addUnion(Part_1_doc, Union_5_objects) +Union_6_objects = [model.selection("SOLID", "Fill_5_1_5/Fill_5_1_5"), model.selection("SOLID", "Fill_5_1_7/Fill_5_1_7"), model.selection("SOLID", "Fill_5_1_12/Fill_5_1_12")] +Union_6 = model.addUnion(Part_1_doc, Union_6_objects) +Union_6.result().setColor(0, 0, 204) +Union_6.result().subResult(0).setColor(204, 102, 102) +Union_6.result().subResult(1).setColor(127, 254, 127) +Union_6.result().subResult(2).setColor(102, 51, 102) +Union_6.result().subResult(3).setColor(76, 76, 153) +Union_6.result().subResult(4).setColor(0, 0, 254) + +Partition_1_objects = [model.selection("SOLID", "Recover_1_1"), model.selection("COMPSOLID", "Union_1_1"), model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "demi-sphere")] +Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects) +Partition_1.result().setColor(102, 0, 0) +Partition_1.result().subResult(0).setColor(255, 255, 0) +Partition_1.result().subResult(1).setColor(0, 254, 0) +Partition_1.result().subResult(2).setColor(0, 255, 255) +Partition_1.result().subResult(3).setColor(255, 85, 0) +Partition_1.result().subResult(4).setColor(153, 0, 0) +Partition_1.result().subResult(5).setColor(254, 0, 254) +Partition_1.result().subResult(6).setColor(127, 127, 254) +Partition_1.result().subResult(7).setColor(102, 204, 102) +Partition_1.result().subResult(8).setColor(127, 254, 127) +Partition_1.result().subResult(9).setColor(153, 153, 76) +Partition_1.result().subResult(10).setColor(204, 102, 102) +Partition_1.result().subResult(11).setColor(127, 254, 254) +Partition_1.result().subResult(12).setColor(255, 255, 0) +Partition_1.result().subResult(13).setColor(102, 51, 102) +Partition_1.result().subResult(14).setColor(102, 204, 204) +Partition_1.result().subResult(15).setColor(254, 127, 254) +Partition_1.result().subResult(16).setColor(153, 153, 0) +Partition_1.result().subResult(17).setColor(153, 153, 0) +Partition_1.result().subResult(18).setColor(204, 0, 204) + +Folder_1 = model.addFolder(Part_1_doc, Revolution_1, Union_1) +Folder_2 = model.addFolder(Part_1_doc, Point_3, Union_6) +model.do() + +# check the result +model.testNbResults(Partition_1, 1) +model.testNbSubResults(Partition_1, [19]) +model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19]) +model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [199]) +model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [814]) +model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1628]) +model.testResultsVolumes(Partition_1, [103867.289635450288187712430953979]) + +# change parameter and check validity of the result +Param_Diam.setValue(8) +model.do() + +model.testNbResults(Partition_1, 1) +model.testNbSubResults(Partition_1, [19]) +model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19]) +model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [191]) +model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [744]) +model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1488]) +model.testResultsVolumes(Partition_1, [103221.354557478349306620657444]) + +model.end() + +#assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/_Test2394.py b/src/FeaturesPlugin/Test/_Test2394.py deleted file mode 100644 index 13639bba7..000000000 --- a/src/FeaturesPlugin/Test/_Test2394.py +++ /dev/null @@ -1,258 +0,0 @@ -# -*- coding: utf-8 -*- - -## Copyright (C) 2018-20xx CEA/DEN, EDF R&D -## -## This library is free software; you can redistribute it and/or -## modify it under the terms of the GNU Lesser General Public -## License as published by the Free Software Foundation; either -## version 2.1 of the License, or (at your option) any later version. -## -## This library is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## Lesser General Public License for more details. -## -## You should have received a copy of the GNU Lesser General Public -## License along with this library; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -## -## See http:##www.salome-platform.org/ or -## email : webmaster.salome@opencascade.com -## - -from GeomAPI import * -from SketchAPI import * - -from salome.shaper import model - -model.begin() -partSet = model.moduleDocument() -Part_1 = model.addPart(partSet) -Part_1_doc = Part_1.document() - -model.addParameter(Part_1_doc, "R", "58") -model.addParameter(Part_1_doc, "cote_cube", "R/2") -model.addParameter(Part_1_doc, "theta", "54") -model.addParameter(Part_1_doc, "phi", "36") -model.addParameter(Part_1_doc, "pi", "3.141592653589793") -model.addParameter(Part_1_doc, "x", "R*sin(phi/180*pi)*cos(theta/180*pi)") -model.addParameter(Part_1_doc, "y", "R*sin(phi/180*pi)*sin(theta/180*pi)") -model.addParameter(Part_1_doc, "z", "R*cos(phi/180*pi)") -model.addParameter(Part_1_doc, "haut_ext_tuyau", "5") -model.addParameter(Part_1_doc, "haut_int_tuyau", "14") -Param_Diam = model.addParameter(Part_1_doc, "diam_tuyau", "10") - -Revolution_1 = model.addRevolution(Part_1_doc, [], model.selection("EDGE", "PartSet/OZ"), 90, 0) -Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ")) -SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False) -SketchPoint_1 = SketchProjection_1.createdFeature() -SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) -SketchLine_1 = SketchProjection_2.createdFeature() -SketchArc_1 = Sketch_1.addArc(0, 0, 58, 0, 0, -58, True) -SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center()) -SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.startPoint()) -SketchLine_2 = Sketch_1.addLine(0, -58, 0, 0) -SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.startPoint()) -SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_2.endPoint()) -SketchLine_3 = Sketch_1.addLine(0, 0, 58, 0) -SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) -SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint()) -SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) -SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), "R") -Revolution_1.setNestedSketch(Sketch_1) - -Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 0, "cote_cube") -Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_2")) -SketchLine_4 = Sketch_2.addLine(29, 0, 0, 0) -SketchLine_5 = Sketch_2.addLine(0, 0, 0, 29) -SketchLine_6 = Sketch_2.addLine(0, 29, 29, 29) -SketchLine_7 = Sketch_2.addLine(29, 29, 29, 0) -SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_4.startPoint()) -SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint()) -SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) -SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) -SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_4.result()) -SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_5.result()) -SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_6.result()) -SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result()) -SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_6.result(), "cote_cube") -SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_6.result(), SketchLine_7.result()) -SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/To_Face_1"), False) -SketchLine_8 = SketchProjection_3.createdFeature() -SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_8.result()) -SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/From_Face_1"), False) -SketchLine_9 = SketchProjection_4.createdFeature() -SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.result()) -Extrusion_1.setNestedSketch(Sketch_2) - -Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1")]) - -Point_2 = model.addPoint(Part_1_doc, "x", "y", "-z") -Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "Fill_1_1_2/Modified_Face_3&Fill_1_1_2/Modified_Face_2&Fill_1_1_2/Modified_Face_1")) -Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Point_1"), True) -Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "haut_ext_tuyau", True) -Plane_5.result().setName("Plane_2 arrivee tuyau") -Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"), 45) -Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_1"), 45) -Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"), "90+45") - -Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_1_1_1")], [model.selection("FACE", "Plane_5")]) -Fill_3 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_2_1_2")], [model.selection("FACE", "Plane_3")]) -Fill_4 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_3_1_2")], [model.selection("FACE", "Plane_4")]) -Fill_4.result().setColor(102, 51, 51) -Fill_4.result().subResult(0).setColor(153, 153, 76) -Fill_4.result().subResult(1).setColor(0, 204, 204) -Fill_4.result().subResult(2).setColor(51, 51, 102) -Fill_4.result().subResult(3).setColor(102, 204, 102) -Fill_4.result().subResult(4).setColor(204, 204, 0) - -Union_1 = model.addUnion(Part_1_doc, [model.selection("SOLID", "Fill_4_1_4"), model.selection("SOLID", "Fill_4_1_2")]) - -Point_3 = model.addPoint(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("FACE", "Plane_2 arrivee tuyau")) - -Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2 arrivee tuyau")) -SketchProjection_5 = Sketch_3.addProjection(model.selection("VERTEX", "Point_2"), False) -SketchPoint_2 = SketchProjection_5.createdFeature() -SketchCircle_1 = Sketch_3.addCircle(0, 0, 10) -SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchPoint_2.result(), SketchCircle_1.center()) -SketchConstraintRadius_1 = Sketch_3.setRadius(SketchCircle_1.results()[1], "diam_tuyau") -SketchLine_10 = Sketch_3.addLine(-5, 5, 5, 5) -SketchLine_11 = Sketch_3.addLine(5, 5, 5, -5) -SketchLine_12 = Sketch_3.addLine(5, -5, -5, -5) -SketchLine_13 = Sketch_3.addLine(-5, -5, -5, 5) -SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_10.startPoint()) -SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint()) -SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint()) -SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint()) -SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_10.result()) -SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result()) -SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_12.result()) -SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_13.result()) -SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_10.result(), SketchLine_13.result()) -SketchLine_14 = Sketch_3.addLine(5, 5, 7.071067811865479, 7.071067811865475) -SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_14.startPoint()) -SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchCircle_1.results()[1]) -SketchLine_15 = Sketch_3.addLine(-5, -5, -7.071067811865472, -7.071067811865476) -SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint()) -SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchCircle_1.results()[1]) -SketchConstraintCollinear_1 = Sketch_3.setCollinear(SketchLine_14.result(), SketchLine_15.result()) -SketchLine_16 = Sketch_3.addLine(7.071067811865478, -7.071067811865476, 5, -5) -SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchCircle_1.results()[1]) -SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_16.endPoint()) -SketchLine_17 = Sketch_3.addLine(-5, 5, -7.071067811865472, 7.071067811865476) -SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_10.startPoint(), SketchLine_17.startPoint()) -SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_17.endPoint(), SketchCircle_1.results()[1]) -SketchConstraintCollinear_2 = Sketch_3.setCollinear(SketchLine_17.result(), SketchLine_16.result()) -SketchConstraintEqual_3 = Sketch_3.setEqual(SketchLine_14.result(), SketchLine_15.result()) -SketchConstraintEqual_4 = Sketch_3.setEqual(SketchLine_17.result(), SketchLine_16.result()) -SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_10.result(), "diam_tuyau") -model.do() - -Extrusion_2_objects = [model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_11f-SketchLine_14r-SketchLine_16r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_10f-SketchLine_14f-SketchLine_17r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_13f-SketchLine_15r-SketchLine_17f"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_12f-SketchLine_15f-SketchLine_16f")] -Extrusion_2 = model.addExtrusion(Part_1_doc, Extrusion_2_objects, model.selection(), 10, 0) -Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_13r")], model.selection(), "haut_int_tuyau", 0) - -Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_3")) -SketchProjection_6 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), False) -SketchPoint_3 = SketchProjection_6.createdFeature() -SketchProjection_7 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), False) -SketchPoint_4 = SketchProjection_7.createdFeature() -SketchArc_2 = Sketch_4.addArc(0, 0, -7.071067811865476, -7.071067811865472, 7.071067811865476, 7.071067811865472, True) -SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchPoint_3.result(), SketchArc_2.startPoint()) -SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchArc_2.results()[1]) -SketchLine_18 = Sketch_4.addLine(7.071067811865476, 7.071067811865472, -7.071067811865476, -7.071067811865472) -SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchLine_18.startPoint()) -SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_18.endPoint()) -SketchProjection_8 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), False) -SketchPoint_5 = SketchProjection_8.createdFeature() -SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchAPI_Point(SketchPoint_5).coordinates()) -model.do() - -Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchArc_2_2f-SketchLine_18r")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_18"), 0, 180) - -Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_2_1")], [model.selection("SOLID", "Extrusion_3_1")]) -Cut_1.result().setName("demi-sphere") - -Plane_9 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/From_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_10&Extrusion_2_1/To_Face_4")) -Plane_10 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_12&Extrusion_2_1/Generated_Face_11&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/From_Face_1")) -Plane_11 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/From_Face_3")) -Plane_12 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/From_Face_4")) - -Recover_1 = model.addRecover(Part_1_doc, Cut_1, [Extrusion_3.result()]) - -Plane_13 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape4"), model.selection("EDGE", "Recover_1_1/Shape4&Recover_1_1/Shape6"), "90+45") -Plane_14 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape1"), model.selection("EDGE", "Recover_1_1/Shape1&Recover_1_1/Shape6"), "90+45") -Plane_15 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape2"), model.selection("EDGE", "Recover_1_1/Shape2&Recover_1_1/Shape6"), "90+45") -Plane_16 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape6"), model.selection("EDGE", "Recover_1_1/Shape3&Recover_1_1/Shape6"), 45) - -Fill_5_objects_2 = [model.selection("FACE", "Plane_6"), model.selection("FACE", "Plane_7"), model.selection("FACE", "Plane_8"), model.selection("FACE", "Plane_9"), model.selection("FACE", "Plane_10"), model.selection("FACE", "Plane_11"), model.selection("FACE", "Plane_12"), model.selection("FACE", "Plane_13")] -Fill_5 = model.addFill(Part_1_doc, [model.selection("SOLID", "demi-sphere")], Fill_5_objects_2) - -Union_2_objects = [model.selection("SOLID", "Fill_5_1_14"), model.selection("SOLID", "Fill_5_1_15"), model.selection("SOLID", "Fill_5_1_16")] -Union_2 = model.addUnion(Part_1_doc, Union_2_objects) -Union_3_objects = [model.selection("SOLID", "Fill_5_1_8/Fill_5_1_8"), model.selection("SOLID", "Fill_5_1_4/Fill_5_1_4"), model.selection("SOLID", "Fill_5_1_9/Fill_5_1_9"), model.selection("SOLID", "Fill_5_1_11/Fill_5_1_11")] -Union_3 = model.addUnion(Part_1_doc, Union_3_objects) -Union_4_objects = [model.selection("SOLID", "Fill_5_1_6/Fill_5_1_6"), model.selection("SOLID", "Fill_5_1_10/Fill_5_1_10"), model.selection("SOLID", "Fill_5_1_13/Fill_5_1_13")] -Union_4 = model.addUnion(Part_1_doc, Union_4_objects) -Union_5_objects = [model.selection("SOLID", "Fill_5_1_2/Fill_5_1_2"), model.selection("SOLID", "Fill_5_1_1/Fill_5_1_1"), model.selection("SOLID", "Fill_5_1_3/Fill_5_1_3")] -Union_5 = model.addUnion(Part_1_doc, Union_5_objects) -Union_6_objects = [model.selection("SOLID", "Fill_5_1_5/Fill_5_1_5"), model.selection("SOLID", "Fill_5_1_7/Fill_5_1_7"), model.selection("SOLID", "Fill_5_1_12/Fill_5_1_12")] -Union_6 = model.addUnion(Part_1_doc, Union_6_objects) -Union_6.result().setColor(0, 0, 204) -Union_6.result().subResult(0).setColor(204, 102, 102) -Union_6.result().subResult(1).setColor(127, 254, 127) -Union_6.result().subResult(2).setColor(102, 51, 102) -Union_6.result().subResult(3).setColor(76, 76, 153) -Union_6.result().subResult(4).setColor(0, 0, 254) - -Partition_1_objects = [model.selection("SOLID", "Recover_1_1"), model.selection("COMPSOLID", "Union_1_1"), model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "demi-sphere")] -Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects) -Partition_1.result().setColor(102, 0, 0) -Partition_1.result().subResult(0).setColor(255, 255, 0) -Partition_1.result().subResult(1).setColor(0, 254, 0) -Partition_1.result().subResult(2).setColor(0, 255, 255) -Partition_1.result().subResult(3).setColor(255, 85, 0) -Partition_1.result().subResult(4).setColor(153, 0, 0) -Partition_1.result().subResult(5).setColor(254, 0, 254) -Partition_1.result().subResult(6).setColor(127, 127, 254) -Partition_1.result().subResult(7).setColor(102, 204, 102) -Partition_1.result().subResult(8).setColor(127, 254, 127) -Partition_1.result().subResult(9).setColor(153, 153, 76) -Partition_1.result().subResult(10).setColor(204, 102, 102) -Partition_1.result().subResult(11).setColor(127, 254, 254) -Partition_1.result().subResult(12).setColor(255, 255, 0) -Partition_1.result().subResult(13).setColor(102, 51, 102) -Partition_1.result().subResult(14).setColor(102, 204, 204) -Partition_1.result().subResult(15).setColor(254, 127, 254) -Partition_1.result().subResult(16).setColor(153, 153, 0) -Partition_1.result().subResult(17).setColor(153, 153, 0) -Partition_1.result().subResult(18).setColor(204, 0, 204) - -Folder_1 = model.addFolder(Part_1_doc, Revolution_1, Union_1) -Folder_2 = model.addFolder(Part_1_doc, Point_3, Union_6) -model.do() - -# check the result -model.testNbResults(Partition_1, 1) -model.testNbSubResults(Partition_1, [19]) -model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19]) -model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [199]) -model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [814]) -model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1628]) -model.testResultsVolumes(Partition_1, [103867.289635450288187712430953979]) - -# change parameter and check validity of the result -Param_Diam.setValue(8) -model.do() - -model.testNbResults(Partition_1, 1) -model.testNbSubResults(Partition_1, [19]) -model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19]) -model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [191]) -model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [744]) -model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1488]) -model.testResultsVolumes(Partition_1, [103221.354557478349306620657444]) - -model.end() - -#assert(model.checkPythonDump())