From: azv Date: Mon, 13 May 2019 10:23:58 +0000 (+0300) Subject: Task 3.2. Concealment into multi-level Compounds X-Git-Tag: VEDF2019Lot4~101^2~80 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=1d369e0e18eda4bfd12518d9798fd7fbf517e852;p=modules%2Fshaper.git Task 3.2. Concealment into multi-level Compounds Update behavior of SMASH operation to keep hierarchy of compounds. --- diff --git a/src/FeaturesAPI/FeaturesAPI_BooleanSmash.cpp b/src/FeaturesAPI/FeaturesAPI_BooleanSmash.cpp index 9c22e3bd3..c23f63967 100644 --- a/src/FeaturesAPI/FeaturesAPI_BooleanSmash.cpp +++ b/src/FeaturesAPI/FeaturesAPI_BooleanSmash.cpp @@ -35,10 +35,12 @@ FeaturesAPI_BooleanSmash::FeaturesAPI_BooleanSmash( FeaturesAPI_BooleanSmash::FeaturesAPI_BooleanSmash( const std::shared_ptr& theFeature, const std::list& theMainObjects, - const std::list& theToolObjects) + const std::list& theToolObjects, + const int theVersion) : ModelHighAPI_Interface(theFeature) { if(initialize()) { + fillAttribute(theVersion, theFeature->integer(FeaturesPlugin_Boolean::VERSION_ID())); fillAttribute(theMainObjects, mymainObjects); fillAttribute(theToolObjects, mytoolObjects); @@ -82,17 +84,26 @@ void FeaturesAPI_BooleanSmash::dump(ModelHighAPI_Dumper& theDumper) const aBase->selectionList(FeaturesPlugin_BooleanSmash::OBJECT_LIST_ID()); AttributeSelectionListPtr aTools = aBase->selectionList(FeaturesPlugin_BooleanSmash::TOOL_LIST_ID()); + AttributeIntegerPtr aVersion = + aBase->integer(FeaturesPlugin_BooleanSmash::VERSION_ID()); + + theDumper << "(" << aDocName << ", " << anObjects << ", " << aTools; + + if (aVersion && aVersion->isInitialized()) + theDumper << ", " << aVersion->value(); - theDumper << "(" << aDocName << ", " << anObjects << ", " << aTools << ")" << std::endl; + theDumper << ")" << std::endl; } //================================================================================================== BooleanSmashPtr addSmash(const std::shared_ptr& thePart, const std::list& theMainObjects, - const std::list& theToolObjects) + const std::list& theToolObjects, + const int theVersion) { std::shared_ptr aFeature = thePart->addFeature(FeaturesAPI_BooleanSmash::ID()); return BooleanSmashPtr(new FeaturesAPI_BooleanSmash(aFeature, theMainObjects, - theToolObjects)); + theToolObjects, + theVersion)); } diff --git a/src/FeaturesAPI/FeaturesAPI_BooleanSmash.h b/src/FeaturesAPI/FeaturesAPI_BooleanSmash.h index f9cadd6ed..a6e1bbc52 100644 --- a/src/FeaturesAPI/FeaturesAPI_BooleanSmash.h +++ b/src/FeaturesAPI/FeaturesAPI_BooleanSmash.h @@ -44,7 +44,8 @@ public: FEATURESAPI_EXPORT FeaturesAPI_BooleanSmash(const std::shared_ptr& theFeature, const std::list& theMainObjects, - const std::list& theToolObjects); + const std::list& theToolObjects, + const int theVersion = 0); /// Destructor. FEATURESAPI_EXPORT @@ -77,6 +78,7 @@ typedef std::shared_ptr BooleanSmashPtr; FEATURESAPI_EXPORT BooleanSmashPtr addSmash(const std::shared_ptr& thePart, const std::list& theMainObjects, - const std::list& theToolObjects); + const std::list& theToolObjects, + const int theVersion = 0); #endif // FeaturesAPI_BooleanSmash_H_ diff --git a/src/FeaturesPlugin/CMakeLists.txt b/src/FeaturesPlugin/CMakeLists.txt index 3d99fb446..ac313d386 100644 --- a/src/FeaturesPlugin/CMakeLists.txt +++ b/src/FeaturesPlugin/CMakeLists.txt @@ -476,7 +476,10 @@ ADD_UNIT_TESTS(TestExtrusion.py TestBooleanFuse_MultiLevelCompound_v20190506_2.py TestBooleanFuse_MultiLevelCompound_v20190506_3.py TestBooleanFuse_MultiLevelCompound_v20190506_4.py - TestBooleanSmash_MultiLevelCompound0.py + TestBooleanSmash_MultiLevelCompound_v0_1.py + TestBooleanSmash_MultiLevelCompound_v0_2.py + TestBooleanSmash_MultiLevelCompound_v20190506_1.py + TestBooleanSmash_MultiLevelCompound_v20190506_2.py TestBooleanSplit_MultiLevelCompound0.py TestPartition_MultiLevelCompound0.py ) diff --git a/src/FeaturesPlugin/FeaturesPlugin_BooleanSmash.cpp b/src/FeaturesPlugin/FeaturesPlugin_BooleanSmash.cpp index c3b8243ae..a46ed7409 100644 --- a/src/FeaturesPlugin/FeaturesPlugin_BooleanSmash.cpp +++ b/src/FeaturesPlugin/FeaturesPlugin_BooleanSmash.cpp @@ -35,6 +35,8 @@ #include #include +static const int THE_SMASH_VERSION_1 = 20190506; + //================================================================================================== FeaturesPlugin_BooleanSmash::FeaturesPlugin_BooleanSmash() : FeaturesPlugin_Boolean(FeaturesPlugin_Boolean::BOOL_SMASH) @@ -46,105 +48,59 @@ void FeaturesPlugin_BooleanSmash::initAttributes() { data()->addAttribute(OBJECT_LIST_ID(), ModelAPI_AttributeSelectionList::typeId()); data()->addAttribute(TOOL_LIST_ID(), ModelAPI_AttributeSelectionList::typeId()); + + initVersion(THE_SMASH_VERSION_1); } //================================================================================================== void FeaturesPlugin_BooleanSmash::execute() { std::string anError; - ListOfShape anObjects, aTools; - std::map, ListOfShape> aCompSolidsObjects; - - // Getting objects. - AttributeSelectionListPtr anObjectsSelList = selectionList(OBJECT_LIST_ID()); - for(int anObjectsIndex = 0; anObjectsIndex < anObjectsSelList->size(); anObjectsIndex++) { - AttributeSelectionPtr anObjectAttr = anObjectsSelList->value(anObjectsIndex); - std::shared_ptr anObject = anObjectAttr->value(); - if(!anObject.get()) { - return; - } - ResultPtr aContext = anObjectAttr->context(); - ResultBodyPtr aResCompSolidPtr = ModelAPI_Tools::bodyOwner(aContext); - if (aResCompSolidPtr.get()) - { - std::shared_ptr aContextShape = aResCompSolidPtr->shape(); - - std::map, ListOfShape>::iterator - anIt = aCompSolidsObjects.begin(); - for (; anIt != aCompSolidsObjects.end(); anIt++) { - if (anIt->first->isEqual(aContextShape)) { - aCompSolidsObjects[anIt->first].push_back(anObject); - break; - } - } - if (anIt == aCompSolidsObjects.end()) { - aCompSolidsObjects[aContextShape].push_back(anObject); - } - - } else { - anObjects.push_back(anObject); - } - } + ObjectHierarchy anObjectsHistory, aToolsHistory; + ListOfShape aPlanes; - // Getting tools. - AttributeSelectionListPtr aToolsSelList = selectionList(TOOL_LIST_ID()); - for(int aToolsIndex = 0; aToolsIndex < aToolsSelList->size(); aToolsIndex++) { - AttributeSelectionPtr aToolAttr = aToolsSelList->value(aToolsIndex); - GeomShapePtr aTool = aToolAttr->value(); - if(!aTool.get()) { - return; - } - aTools.push_back(aTool); - } + // Getting objects and tools. + if (!processAttribute(OBJECT_LIST_ID(), anObjectsHistory, aPlanes) || + !processAttribute(TOOL_LIST_ID(), aToolsHistory, aPlanes)) + return; int aResultIndex = 0; - if((anObjects.empty() && aCompSolidsObjects.empty()) - || aTools.empty()) { + if (anObjectsHistory.IsEmpty() || aToolsHistory.IsEmpty()) { std::string aFeatureError = "Error: Not enough objects for boolean operation."; setError(aFeatureError); return; } + // Collecting all shapes which will be smashed. + ListOfShape aShapesToSmash = anObjectsHistory.Objects(); + // List of original shapes for naming. ListOfShape anOriginalShapes; - anOriginalShapes.insert(anOriginalShapes.end(), anObjects.begin(), anObjects.end()); + anOriginalShapes.insert(anOriginalShapes.end(), aShapesToSmash.begin(), aShapesToSmash.end()); + ListOfShape aTools = aToolsHistory.Objects(); anOriginalShapes.insert(anOriginalShapes.end(), aTools.begin(), aTools.end()); - // Collecting all shapes which will be smashed. - ListOfShape aShapesToSmash; - aShapesToSmash.insert(aShapesToSmash.end(), anObjects.begin(), anObjects.end()); - // Collecting solids from compsolids which will not be modified in // boolean operation and will be added to result. ListOfShape aShapesToAdd; - for (std::map, ListOfShape>::iterator - anIt = aCompSolidsObjects.begin(); - anIt != aCompSolidsObjects.end(); + for (ObjectHierarchy::Iterator anIt = anObjectsHistory.Begin(); + anIt != anObjectsHistory.End(); ++anIt) { - std::shared_ptr aCompSolid = anIt->first; - ListOfShape& aUsedInOperationSolids = anIt->second; - anOriginalShapes.push_back(aCompSolid); - aShapesToSmash.insert(aShapesToSmash.end(), - aUsedInOperationSolids.begin(), - aUsedInOperationSolids.end()); - - // Collect solids from compsolid which will not be modified in boolean operation. - for (GeomAPI_ShapeExplorer anExp(aCompSolid, GeomAPI_Shape::SOLID); - anExp.more(); - anExp.next()) - { - std::shared_ptr aSolidInCompSolid = anExp.current(); - ListOfShape::iterator anIt = aUsedInOperationSolids.begin(); - for (; anIt != aUsedInOperationSolids.end(); anIt++) { - if (aSolidInCompSolid->isEqual(*anIt)) { - break; - } - } - if (anIt == aUsedInOperationSolids.end()) { - aShapesToAdd.push_back(aSolidInCompSolid); - } + GeomShapePtr aParent = anObjectsHistory.Parent(*anIt, false); + if (aParent) { + anOriginalShapes.push_back(aParent); + + ListOfShape aUsed, aNotUsed; + anObjectsHistory.SplitCompound(aParent, aUsed, aNotUsed); + aShapesToAdd.insert(aShapesToAdd.end(), aNotUsed.begin(), aNotUsed.end()); + + // add unused shapes of compounds/compsolids to the history, + // to avoid treating them as unused later when constructing a compound containing + // the result of Smash and all unused sub-shapes of multi-level compounds + for (ListOfShape::iterator anIt = aNotUsed.begin(); anIt != aNotUsed.end(); ++anIt) + anObjectsHistory.AddObject(*anIt); } } @@ -212,6 +168,14 @@ void FeaturesPlugin_BooleanSmash::execute() aMakeShapeList->appendAlgo(aFillerAlgo); } + // take into account a version of SMASH feature + int aSmashVersion = version(); + if (aSmashVersion == THE_SMASH_VERSION_1) { + // merge hierarchies of compounds containing objects and tools + // and append the result of the FUSE operation + aShape = keepUnusedSubsOfCompound(aShape, anObjectsHistory, aToolsHistory, aMakeShapeList); + } + std::shared_ptr aResultBody = document()->createBody(data(), aResultIndex); FeaturesPlugin_Tools::loadModifiedShapes(aResultBody, diff --git a/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound0.py b/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound0.py deleted file mode 100644 index 0c4525e2a..000000000 --- a/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound0.py +++ /dev/null @@ -1,92 +0,0 @@ -# Copyright (C) 2014-2019 CEA/DEN, EDF R&D -# -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License, or (at your option) any later version. -# -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com -# - -from SketchAPI import * - -from salome.shaper import model - -model.begin() -partSet = model.moduleDocument() -Part_1 = model.addPart(partSet) -Part_1_doc = Part_1.document() -Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20) -LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2) -LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) -LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0) -LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0) -LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255) -LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255) -Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) -SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0) -SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5) -SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5) -SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0) -SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) -SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) -SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) -SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) -SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) -SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) -SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) -SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) -SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False) -SketchLine_5 = SketchProjection_1.createdFeature() -SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True) -SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result()) -SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14) -SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5) -SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12) -SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15) -SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15) -SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12) -SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint()) -SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) -SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint()) -SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) -SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result()) -SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result()) -SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result()) -SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result()) -SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3) -SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10) -SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True) -SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True) -model.do() -Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20) -Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15) -LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) -AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) -Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) -Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0) -Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0) -Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0) -Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0) -Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("SOLID", "Compound_1_1_2_1"), model.selection("SOLID", "Compound_1_1_2_2")]) -model.do() -model.end() - -from GeomAPI import GeomAPI_Shape - -model.testNbResults(Smash_1, 1) -model.testNbSubResults(Smash_1, [8]) -model.testNbSubShapes(Smash_1, GeomAPI_Shape.SOLID, [8]) -model.testNbSubShapes(Smash_1, GeomAPI_Shape.FACE, [80]) -model.testNbSubShapes(Smash_1, GeomAPI_Shape.EDGE, [348]) -model.testNbSubShapes(Smash_1, GeomAPI_Shape.VERTEX, [696]) -model.testResultsVolumes(Smash_1, [15044.469954918753501260653138161]) diff --git a/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v0_1.py b/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v0_1.py new file mode 100644 index 000000000..25fffab88 --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v0_1.py @@ -0,0 +1,96 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2) +LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0) +LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0) +LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255) +LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0) +SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5) +SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5) +SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_5 = SketchProjection_1.createdFeature() +SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result()) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5) +SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12) +SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15) +SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15) +SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint()) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint()) +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result()) +SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result()) +SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3) +SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10) +SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True) +SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15) +LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) +Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0) +Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0) +Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0) +Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0) +Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("SOLID", "Compound_1_1_2_1"), model.selection("SOLID", "Compound_1_1_2_2")]) + +model.testHaveNamingSubshapes(Smash_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Smash_1, 1) +model.testNbSubResults(Smash_1, [8]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.SOLID, [8]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.FACE, [80]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.EDGE, [348]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.VERTEX, [696]) +model.testResultsVolumes(Smash_1, [15044.469954918753501260653138161]) + +assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v0_2.py b/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v0_2.py new file mode 100644 index 000000000..f3e5810b9 --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v0_2.py @@ -0,0 +1,121 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_1 = SketchProjection_1.createdFeature() +SketchCircle_1 = Sketch_1.addCircle(0, 0, 10) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_1.center()) +SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 10) +SketchCircle_2 = Sketch_1.addCircle(10, 0, 10) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_2.center()) +SketchConstraintEqual_1 = Sketch_1.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1]) +SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_2.center(), 10) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 20, 0) +Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False) +SketchLine_2 = SketchProjection_2.createdFeature() +SketchCircle_3 = Sketch_2.addCircle(0, -7, 10) +SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.result(), SketchCircle_3.center()) +SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_3.results()[1], 10) +SketchConstraintDistanceVertical_1 = Sketch_2.setVerticalDistance(SketchCircle_3.center(), SketchAPI_Line(SketchLine_2).startPoint(), 7) +SketchCircle_4 = Sketch_2.addCircle(40, -27, 10) +SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_4.results()[1], SketchCircle_3.results()[1]) +SketchConstraintDistanceHorizontal_2 = Sketch_2.setHorizontalDistance(SketchCircle_3.center(), SketchCircle_4.center(), 40) +SketchConstraintDistanceVertical_2 = Sketch_2.setVerticalDistance(SketchCircle_4.center(), SketchCircle_3.center(), 20) +model.do() +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 20, 0) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")]) +Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPSOLID", "Extrusion_1_1")]) +Compound_2.result().subResult(0).setColor(255, 170, 0) +Compound_2.result().subResult(0).subResult(0).setColor(255, 170, 0) +Compound_2.result().subResult(0).subResult(1).setColor(255, 170, 0) +Compound_2.result().subResult(1).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(0).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(1).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(2).setColor(0, 85, 255) +Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_3 = Sketch_3.addLine(7, 0, -7, 0) +SketchLine_4 = Sketch_3.addLine(-7, 0, -7, 5) +SketchLine_5 = Sketch_3.addLine(-7, 5, 7, 5) +SketchLine_6 = Sketch_3.addLine(7, 5, 7, 0) +SketchConstraintCoincidence_4 = Sketch_3.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_5 = Sketch_3.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintCoincidence_6 = Sketch_3.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint()) +SketchConstraintCoincidence_7 = Sketch_3.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchConstraintHorizontal_1 = Sketch_3.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_1 = Sketch_3.setVertical(SketchLine_4.result()) +SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_5.result()) +SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_6.result()) +SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_7 = SketchProjection_3.createdFeature() +SketchConstraintDistance_1 = Sketch_3.setDistance(SketchLine_5.endPoint(), SketchLine_7.result(), 7, True) +SketchConstraintMiddle_1 = Sketch_3.setMiddlePoint(SketchAPI_Line(SketchLine_7).startPoint(), SketchLine_3.result()) +SketchConstraintLength_1 = Sketch_3.setLength(SketchLine_4.result(), 5) +SketchLine_8 = Sketch_3.addLine(7, 7, -7.000000000000001, 7) +SketchLine_9 = Sketch_3.addLine(-7.000000000000001, 7, -7.000000000000001, 10) +SketchLine_10 = Sketch_3.addLine(-7.000000000000001, 10, 7, 10) +SketchLine_11 = Sketch_3.addLine(7, 10, 7, 7) +SketchConstraintCoincidence_8 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint()) +SketchConstraintCoincidence_9 = Sketch_3.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint()) +SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint()) +SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_8.result()) +SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_9.result()) +SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_10.result()) +SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result()) +SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchLine_4.result()) +SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_8.startPoint(), SketchLine_6.result()) +SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_9.result(), 3) +SketchConstraintDistance_2 = Sketch_3.setDistance(SketchLine_9.startPoint(), SketchLine_5.result(), 2, True) +model.do() +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r")], model.selection(), 50, -10) +Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r")], model.selection(), 60, 20) +AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) +Compound_3 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) +Compound_3.result().subResult(0).setColor(0, 170, 0) +Compound_3.result().subResult(1).setColor(0, 255, 0) +Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0) +Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0) +Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("SOLID", "Compound_3_1_2_2")]) + +model.testHaveNamingSubshapes(Smash_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Smash_1, 1) +model.testNbSubResults(Smash_1, [2]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.SOLID, [7]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.FACE, [71]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.EDGE, [328]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.VERTEX, [656]) +model.testResultsVolumes(Smash_1, [21124.1140931756599457]) + +assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v20190506_1.py b/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v20190506_1.py new file mode 100644 index 000000000..e0b1e5c55 --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v20190506_1.py @@ -0,0 +1,96 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2) +LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0) +LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0) +LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255) +LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0) +SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5) +SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5) +SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_5 = SketchProjection_1.createdFeature() +SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result()) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5) +SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12) +SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15) +SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15) +SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint()) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint()) +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result()) +SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result()) +SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3) +SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10) +SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True) +SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15) +LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) +Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0) +Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0) +Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0) +Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0) +Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("SOLID", "Compound_1_1_2_1"), model.selection("SOLID", "Compound_1_1_2_2")], 20190506) + +model.testHaveNamingSubshapes(Smash_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Smash_1, 1) +model.testNbSubResults(Smash_1, [3]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.SOLID, [12]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.FACE, [98]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.EDGE, [408]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.VERTEX, [816]) +model.testResultsVolumes(Smash_1, [38810.840569277926988]) + +assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v20190506_2.py b/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v20190506_2.py new file mode 100644 index 000000000..5bb3790e6 --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanSmash_MultiLevelCompound_v20190506_2.py @@ -0,0 +1,121 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_1 = SketchProjection_1.createdFeature() +SketchCircle_1 = Sketch_1.addCircle(0, 0, 10) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_1.center()) +SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 10) +SketchCircle_2 = Sketch_1.addCircle(10, 0, 10) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_2.center()) +SketchConstraintEqual_1 = Sketch_1.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1]) +SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_2.center(), 10) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 20, 0) +Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False) +SketchLine_2 = SketchProjection_2.createdFeature() +SketchCircle_3 = Sketch_2.addCircle(0, -7, 10) +SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.result(), SketchCircle_3.center()) +SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_3.results()[1], 10) +SketchConstraintDistanceVertical_1 = Sketch_2.setVerticalDistance(SketchCircle_3.center(), SketchAPI_Line(SketchLine_2).startPoint(), 7) +SketchCircle_4 = Sketch_2.addCircle(40, -27, 10) +SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_4.results()[1], SketchCircle_3.results()[1]) +SketchConstraintDistanceHorizontal_2 = Sketch_2.setHorizontalDistance(SketchCircle_3.center(), SketchCircle_4.center(), 40) +SketchConstraintDistanceVertical_2 = Sketch_2.setVerticalDistance(SketchCircle_4.center(), SketchCircle_3.center(), 20) +model.do() +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 20, 0) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")]) +Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPSOLID", "Extrusion_1_1")]) +Compound_2.result().subResult(0).setColor(255, 170, 0) +Compound_2.result().subResult(0).subResult(0).setColor(255, 170, 0) +Compound_2.result().subResult(0).subResult(1).setColor(255, 170, 0) +Compound_2.result().subResult(1).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(0).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(1).setColor(0, 85, 255) +Compound_2.result().subResult(1).subResult(2).setColor(0, 85, 255) +Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_3 = Sketch_3.addLine(7, 0, -7, 0) +SketchLine_4 = Sketch_3.addLine(-7, 0, -7, 5) +SketchLine_5 = Sketch_3.addLine(-7, 5, 7, 5) +SketchLine_6 = Sketch_3.addLine(7, 5, 7, 0) +SketchConstraintCoincidence_4 = Sketch_3.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_5 = Sketch_3.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintCoincidence_6 = Sketch_3.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint()) +SketchConstraintCoincidence_7 = Sketch_3.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchConstraintHorizontal_1 = Sketch_3.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_1 = Sketch_3.setVertical(SketchLine_4.result()) +SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_5.result()) +SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_6.result()) +SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_7 = SketchProjection_3.createdFeature() +SketchConstraintDistance_1 = Sketch_3.setDistance(SketchLine_5.endPoint(), SketchLine_7.result(), 7, True) +SketchConstraintMiddle_1 = Sketch_3.setMiddlePoint(SketchAPI_Line(SketchLine_7).startPoint(), SketchLine_3.result()) +SketchConstraintLength_1 = Sketch_3.setLength(SketchLine_4.result(), 5) +SketchLine_8 = Sketch_3.addLine(7, 7, -7.000000000000001, 7) +SketchLine_9 = Sketch_3.addLine(-7.000000000000001, 7, -7.000000000000001, 10) +SketchLine_10 = Sketch_3.addLine(-7.000000000000001, 10, 7, 10) +SketchLine_11 = Sketch_3.addLine(7, 10, 7, 7) +SketchConstraintCoincidence_8 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint()) +SketchConstraintCoincidence_9 = Sketch_3.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint()) +SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint()) +SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_8.result()) +SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_9.result()) +SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_10.result()) +SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result()) +SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchLine_4.result()) +SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_8.startPoint(), SketchLine_6.result()) +SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_9.result(), 3) +SketchConstraintDistance_2 = Sketch_3.setDistance(SketchLine_9.startPoint(), SketchLine_5.result(), 2, True) +model.do() +Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r")], model.selection(), 50, -10) +Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r")], model.selection(), 60, 20) +AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) +Compound_3 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) +Compound_3.result().subResult(0).setColor(0, 170, 0) +Compound_3.result().subResult(1).setColor(0, 255, 0) +Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0) +Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0) +Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("SOLID", "Compound_3_1_2_2")], 20190506) + +model.testHaveNamingSubshapes(Smash_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Smash_1, 1) +model.testNbSubResults(Smash_1, [3]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.SOLID, [9]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.FACE, [83]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.EDGE, [376]) +model.testNbSubShapes(Smash_1, GeomAPI_Shape.VERTEX, [752]) +model.testResultsVolumes(Smash_1, [27284.1140931756599457]) + +assert(model.checkPythonDump())