From: jfa Date: Wed, 27 Mar 2024 19:05:12 +0000 (+0000) Subject: Modify tests due to OCCT improvement: Partition algorithm precerves initial arcs... X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=1046f11d51da9442451893bec650706630d0bb37;p=modules%2Fshaper.git Modify tests due to OCCT improvement: Partition algorithm precerves initial arcs (was replaces by BSplines sometimes in 7.5.3 version --- diff --git a/src/FeaturesPlugin/Test/Test20245_3.py b/src/FeaturesPlugin/Test/Test20245_3.py index 1c8898df0..8e5e3f32b 100644 --- a/src/FeaturesPlugin/Test/Test20245_3.py +++ b/src/FeaturesPlugin/Test/Test20245_3.py @@ -1090,7 +1090,7 @@ SketchLine_77.result().setName("SketchLine_118") SketchProjection_19 = Sketch_8.addProjection(model.selection("EDGE", "Split_2_1_17/Modified_Edge&PartSet/YOZ/YOZ&Sketch_1/SketchArc_2_2"), False) SketchProjection_19.setName("SketchProjection_40") SketchProjection_19.result().setName("SketchProjection_40") -SketchBSpline_1 = SketchProjection_19.createdFeature() +SketchProj19_1 = SketchProjection_19.createdFeature() ### Create SketchProjection SketchProjection_20 = Sketch_8.addProjection(model.selection("EDGE", "Partition_1_1_4/Generated_Edge&PartSet/YOZ/YOZ&Sketch_1/SketchLine_19"), False) @@ -1100,7 +1100,7 @@ SketchLine_78 = SketchProjection_20.createdFeature() SketchLine_78.setName("SketchLine_119") SketchLine_78.result().setName("SketchLine_119") Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_78.result()) -Sketch_8.setCoincident(SketchLine_74.startPoint(), SketchAPI_BSpline(SketchBSpline_1).startPoint()) +Sketch_8.setCoincident(SketchLine_74.startPoint(), SketchAPI_Arc(SketchProj19_1).startPoint()) ### Create SketchLine SketchLine_79 = Sketch_8.addLine(5.676067550792231, 10.23944020672391, 5.829536340268943, 10.44848598250872) diff --git a/src/FeaturesPlugin/Test/Test20245_3_geometrical.py b/src/FeaturesPlugin/Test/Test20245_3_geometrical.py index 70e5c1d7c..21fe714c6 100644 --- a/src/FeaturesPlugin/Test/Test20245_3_geometrical.py +++ b/src/FeaturesPlugin/Test/Test20245_3_geometrical.py @@ -366,10 +366,10 @@ Revolution_3 = model.addRevolution(Part_1_doc, [model.selection("WIRE", (4.21276 Symmetry_1 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", (3.237566604725065, 1.012489110826635e-16, 11.61400119092393)), model.selection("SOLID", (3.223802337712571, 1.605864674679632e-16, 11.57493485456337))], model.selection("FACE", "PartSet/YOZ"), keepOriginal = True) ### Create Cut -Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", (-0.02393444277354129, -2.619925842544883e-15, -2.580701826672511))], [model.selection("COMPOUND", (0, 0, 11.60508262087049))]) +Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", (0, 0, -2.581694))], [model.selection("COMPOUND", (0, 0, 11.60508262087049))]) ### Create Fuse -Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", (-0.02010673966564346, 1.098068506034238e-08, -2.591493279117804)), model.selection("COMPOUND", (0, 0, 11.54608275997197))], removeEdges = True) +Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", (0, 0, -2.592352)), model.selection("COMPOUND", (0, 0, 11.54608275997197))], removeEdges = True) ### Create Plane Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), 3.6, False) @@ -485,10 +485,10 @@ Rotation_1 = model.addRotation(Part_1_doc, [model.selection("COMPOUND", "all-in- Rotation_2 = model.addRotation(Part_1_doc, [model.selection("SOLID", (5, 0, 1.2))], axis = model.selection("EDGE", "PartSet/OZ"), angle = -90) ### Create Fuse -Fuse_2 = model.addFuse(Part_1_doc, [model.selection("SOLID", (-0.01517504751343968, 2.050041270815023e-08, -2.581926283264154)), model.selection("COMPOUND", (6.661338147750939e-16, -6.164784975045299, 1.5))], removeEdges = True) +Fuse_2 = model.addFuse(Part_1_doc, [model.selection("SOLID", (0, 0, -2.582588)), model.selection("COMPOUND", (6.661338147750939e-16, -6.164784975045299, 1.5))], removeEdges = True) ### Create Cut -Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", (-0.01123484393534465, -0.0370107755507461, -2.561989939908471))], [model.selection("SOLID", (6.683953801956267e-16, -5, 1.2))]) +Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", (0, -0.030528, -2.562454))], [model.selection("SOLID", (6.683953801956267e-16, -5, 1.2))]) ### Create Group Group_1_objects = [model.selection("VERTEX", (-4.1398177019328, 0, 11.393656164374)), @@ -708,7 +708,7 @@ Group_3_objects = [model.selection("FACE_4", (-2.517545082612181, -9.79305648457 Group_3 = model.addGroup(Part_1_doc, "FACE", Group_3_objects) ### Create Partition -Partition_1_objects = [model.selection("SOLID", (-0.01000739040276288, -0.02886888807097911, -2.568297753475152)), +Partition_1_objects = [model.selection("SOLID", (0, -0.0201706, -2.568703)), model.selection("FACE", "PartSet/XOZ"), model.selection("FACE", "PartSet/YOZ")] Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True) @@ -1090,7 +1090,7 @@ SketchLine_77.result().setName("SketchLine_118") SketchProjection_19 = Sketch_8.addProjection(model.selection("EDGE", (0, 5.790750667181333, 10.12202136327199)), False) SketchProjection_19.setName("SketchProjection_40") SketchProjection_19.result().setName("SketchProjection_40") -SketchBSpline_1 = SketchProjection_19.createdFeature() +SketchProj19_1 = SketchProjection_19.createdFeature() ### Create SketchProjection SketchProjection_20 = Sketch_8.addProjection(model.selection("EDGE", (0, 6.534999999999997, 9.721499999999999)), False) @@ -1100,7 +1100,7 @@ SketchLine_78 = SketchProjection_20.createdFeature() SketchLine_78.setName("SketchLine_119") SketchLine_78.result().setName("SketchLine_119") Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_78.result()) -Sketch_8.setCoincident(SketchLine_74.startPoint(), SketchAPI_BSpline(SketchBSpline_1).startPoint()) +Sketch_8.setCoincident(SketchLine_74.startPoint(), SketchAPI_Arc(SketchProj19_1).startPoint()) ### Create SketchLine SketchLine_79 = Sketch_8.addLine(5.676067550792231, 10.23944020672391, 5.829536340268943, 10.44848598250872) @@ -1126,7 +1126,7 @@ Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_80.result()) model.do() ### Create Revolution -Revolution_9 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", (0, 5.830822237526045, 10.15645361216909))], model.selection("EDGE", "PartSet/OZ"), 360, 0, "Edges") +Revolution_9 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", (0, 5.830822237526045, 10.3860737))], model.selection("EDGE", "PartSet/OZ"), 360, 0, "Edges") ### Create Split Split_4 = model.addSplit(Part_1_doc, [model.selection("COMPOUND", "all-in-Split_3")], [model.selection("COMPOUND", "all-in-Revolution_9")], keepSubResults = True) diff --git a/src/GeomAlgoImpl/GEOMAlgo_AlgoTools.cxx b/src/GeomAlgoImpl/GEOMAlgo_AlgoTools.cxx index 8f12c9e9b..e79ecdffb 100644 --- a/src/GeomAlgoImpl/GEOMAlgo_AlgoTools.cxx +++ b/src/GeomAlgoImpl/GEOMAlgo_AlgoTools.cxx @@ -834,57 +834,6 @@ Standard_Integer GEOMAlgo_AlgoTools::RefineSDShapes // return 0; } -//======================================================================= -//function : BuildTriangulation -//purpose : -//======================================================================= -Standard_Boolean - GEOMAlgo_AlgoTools::BuildTriangulation (const TopoDS_Shape& theShape) -{ - // calculate deflection - Standard_Real aDeviationCoefficient = 0.001; - - Bnd_Box B; - BRepBndLib::Add(theShape, B); - Standard_Real aXmin, aYmin, aZmin, aXmax, aYmax, aZmax; - B.Get(aXmin, aYmin, aZmin, aXmax, aYmax, aZmax); - - Standard_Real dx = aXmax - aXmin, dy = aYmax - aYmin, dz = aZmax - aZmin; - Standard_Real aDeflection = Max(Max(dx, dy), dz) * aDeviationCoefficient * 4; - Standard_Real aHLRAngle = 0.349066; - - // build triangulation - BRepMesh_IncrementalMesh Inc (theShape, aDeflection, Standard_False, aHLRAngle); - - // check triangulation - bool isTriangulation = true; - - TopExp_Explorer exp (theShape, TopAbs_FACE); - if (exp.More()) - { - TopLoc_Location aTopLoc; - Handle(Poly_Triangulation) aTRF; - aTRF = BRep_Tool::Triangulation(TopoDS::Face(exp.Current()), aTopLoc); - if (aTRF.IsNull()) { - isTriangulation = false; - } - } - else // no faces, try edges - { - TopExp_Explorer expe (theShape, TopAbs_EDGE); - if (!expe.More()) { - isTriangulation = false; - } - else { - TopLoc_Location aLoc; - Handle(Poly_Polygon3D) aPE = BRep_Tool::Polygon3D(TopoDS::Edge(expe.Current()), aLoc); - if (aPE.IsNull()) { - isTriangulation = false; - } - } - } - return isTriangulation; -} //======================================================================= //function : IsCompositeShape diff --git a/src/GeomAlgoImpl/GEOMAlgo_AlgoTools.hxx b/src/GeomAlgoImpl/GEOMAlgo_AlgoTools.hxx index 7a9a20cb3..5182ff75f 100644 --- a/src/GeomAlgoImpl/GEOMAlgo_AlgoTools.hxx +++ b/src/GeomAlgoImpl/GEOMAlgo_AlgoTools.hxx @@ -90,9 +90,6 @@ class GEOMAlgo_AlgoTools { static Standard_Boolean IsCompositeShape(const TopoDS_Shape& aS); - GEOMALGOIMPL_EXPORT - static Standard_Boolean BuildTriangulation(const TopoDS_Shape& aS); - GEOMALGOIMPL_EXPORT static Standard_Integer RefineSDShapes(GEOMAlgo_IndexedDataMapOfPassKeyShapeListOfShape& aMSD, const Standard_Real aTol,