From: azv Date: Tue, 7 May 2019 08:13:23 +0000 (+0300) Subject: Task 3.2. Concealment into multi-level Compounds X-Git-Tag: VEDF2019Lot4~139^2~13 X-Git-Url: http://git.salome-platform.org/gitweb/?a=commitdiff_plain;h=018cf329e62e6cc69ca404b001653c0e7ab5eb68;p=modules%2Fshaper.git Task 3.2. Concealment into multi-level Compounds Update behavior of FUSE operation to keep hierarchy of compounds. --- diff --git a/src/FeaturesAPI/FeaturesAPI_BooleanFuse.cpp b/src/FeaturesAPI/FeaturesAPI_BooleanFuse.cpp index c6cab2735..cd7e08afd 100644 --- a/src/FeaturesAPI/FeaturesAPI_BooleanFuse.cpp +++ b/src/FeaturesAPI/FeaturesAPI_BooleanFuse.cpp @@ -35,11 +35,13 @@ FeaturesAPI_BooleanFuse::FeaturesAPI_BooleanFuse( FeaturesAPI_BooleanFuse::FeaturesAPI_BooleanFuse( const std::shared_ptr& theFeature, const std::list& theMainObjects, - const bool theRemoveEdges) + const bool theRemoveEdges, + const int theVersion) : ModelHighAPI_Interface(theFeature) { if (initialize()) { fillAttribute(FeaturesPlugin_BooleanFuse::CREATION_METHOD_SIMPLE(), mycreationMethod); + fillAttribute(theVersion, theFeature->integer(FeaturesPlugin_Boolean::VERSION_ID())); fillAttribute(theMainObjects, mymainObjects); fillAttribute(theRemoveEdges, myremoveEdges); @@ -52,11 +54,13 @@ FeaturesAPI_BooleanFuse::FeaturesAPI_BooleanFuse( const std::shared_ptr& theFeature, const std::list& theMainObjects, const std::list& theToolObjects, - const bool theRemoveEdges) + const bool theRemoveEdges, + const int theVersion) : ModelHighAPI_Interface(theFeature) { if(initialize()) { fillAttribute(FeaturesPlugin_BooleanFuse::CREATION_METHOD_ADVANCED(), mycreationMethod); + fillAttribute(theVersion, theFeature->integer(FeaturesPlugin_Boolean::VERSION_ID())); fillAttribute(theMainObjects, mymainObjects); fillAttribute(theToolObjects, mytoolObjects); fillAttribute(theRemoveEdges, myremoveEdges); @@ -125,6 +129,8 @@ void FeaturesAPI_BooleanFuse::dump(ModelHighAPI_Dumper& theDumper) const aBase->selectionList(FeaturesPlugin_BooleanFuse::TOOL_LIST_ID()); AttributeBooleanPtr aRemoveEdges = aBase->boolean(FeaturesPlugin_BooleanFuse::REMOVE_INTERSECTION_EDGES_ID()); + AttributeIntegerPtr aVersion = + aBase->integer(FeaturesPlugin_BooleanFuse::VERSION_ID()); theDumper << "(" << aDocName << ", " << anObjects; @@ -132,8 +138,13 @@ void FeaturesAPI_BooleanFuse::dump(ModelHighAPI_Dumper& theDumper) const theDumper << ", " << aTools; } - if (aRemoveEdges->value()) { - theDumper << ", " << true; + bool hasVersion = aVersion && aVersion->isInitialized(); + if (aRemoveEdges->value() || hasVersion) { + theDumper << ", " << aRemoveEdges->value(); + } + + if (hasVersion) { + theDumper << ", " << aVersion->value(); } theDumper << ")" << std::endl; @@ -142,23 +153,27 @@ void FeaturesAPI_BooleanFuse::dump(ModelHighAPI_Dumper& theDumper) const //================================================================================================== BooleanFusePtr addFuse(const std::shared_ptr& thePart, const std::list& theObjects, - const bool theRemoveEdges) + const bool theRemoveEdges, + const int theVersion) { std::shared_ptr aFeature = thePart->addFeature(FeaturesAPI_BooleanFuse::ID()); return BooleanFusePtr(new FeaturesAPI_BooleanFuse(aFeature, theObjects, - theRemoveEdges)); + theRemoveEdges, + theVersion)); } //================================================================================================== BooleanFusePtr addFuse(const std::shared_ptr& thePart, const std::list& theMainObjects, const std::list& theToolObjects, - const bool theRemoveEdges) + const bool theRemoveEdges, + const int theVersion) { std::shared_ptr aFeature = thePart->addFeature(FeaturesAPI_BooleanFuse::ID()); return BooleanFusePtr(new FeaturesAPI_BooleanFuse(aFeature, theMainObjects, theToolObjects, - theRemoveEdges)); + theRemoveEdges, + theVersion)); } diff --git a/src/FeaturesAPI/FeaturesAPI_BooleanFuse.h b/src/FeaturesAPI/FeaturesAPI_BooleanFuse.h index db80f9677..5f44f8aa9 100644 --- a/src/FeaturesAPI/FeaturesAPI_BooleanFuse.h +++ b/src/FeaturesAPI/FeaturesAPI_BooleanFuse.h @@ -42,16 +42,18 @@ public: /// Constructor with values. FEATURESAPI_EXPORT - FeaturesAPI_BooleanFuse(const std::shared_ptr& theFeature, - const std::list& theMainObjects, - const bool theRemoveEdges = false); + FeaturesAPI_BooleanFuse(const std::shared_ptr& theFeature, + const std::list& theMainObjects, + const bool theRemoveEdges = false, + const int theVersion = 0); /// Constructor with values. FEATURESAPI_EXPORT FeaturesAPI_BooleanFuse(const std::shared_ptr& theFeature, const std::list& theMainObjects, const std::list& theToolObjects, - const bool theRemoveEdges = false); + const bool theRemoveEdges = false, + const int theVersion = 0); /// Destructor. FEATURESAPI_EXPORT @@ -96,7 +98,8 @@ typedef std::shared_ptr BooleanFusePtr; FEATURESAPI_EXPORT BooleanFusePtr addFuse(const std::shared_ptr& thePart, const std::list& theObjects, - const bool theRemoveEdges = false); + const bool theRemoveEdges = false, + const int theVersion = 0); /// \ingroup CPPHighAPI /// \brief Create Boolean Fuse feature. @@ -104,6 +107,7 @@ FEATURESAPI_EXPORT BooleanFusePtr addFuse(const std::shared_ptr& thePart, const std::list& theMainObjects, const std::list& theToolObjects, - const bool theRemoveEdges = false); + const bool theRemoveEdges = false, + const int theVersion = 0); #endif // FeaturesAPI_BooleanFuse_H_ diff --git a/src/FeaturesPlugin/CMakeLists.txt b/src/FeaturesPlugin/CMakeLists.txt index 5555d4743..82fd74586 100644 --- a/src/FeaturesPlugin/CMakeLists.txt +++ b/src/FeaturesPlugin/CMakeLists.txt @@ -465,6 +465,11 @@ ADD_UNIT_TESTS(TestExtrusion.py TestBooleanFuse_MultiLevelCompound_v0_1.py TestBooleanFuse_MultiLevelCompound_v0_2.py TestBooleanFuse_MultiLevelCompound_v0_3.py + TestBooleanFuse_MultiLevelCompound_v0_4.py + TestBooleanFuse_MultiLevelCompound_v20190506_1.py + TestBooleanFuse_MultiLevelCompound_v20190506_2.py + TestBooleanFuse_MultiLevelCompound_v20190506_3.py + TestBooleanFuse_MultiLevelCompound_v20190506_4.py TestBooleanSmash_MultiLevelCompound0.py TestBooleanSplit_MultiLevelCompound0.py TestPartition_MultiLevelCompound0.py diff --git a/src/FeaturesPlugin/FeaturesPlugin_Boolean.cpp b/src/FeaturesPlugin/FeaturesPlugin_Boolean.cpp index 7f9ce37ac..856d8d467 100644 --- a/src/FeaturesPlugin/FeaturesPlugin_Boolean.cpp +++ b/src/FeaturesPlugin/FeaturesPlugin_Boolean.cpp @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -420,7 +421,16 @@ void FeaturesPlugin_Boolean::ObjectHierarchy::AddParent(const GeomShapePtr& theS const GeomShapePtr& theParent) { myParent[theShape] = theParent; - mySubshapes[theParent].push_back(theShape); + + MapShapeToIndex::iterator aFound = myParentIndices.find(theParent); + size_t anIndex = myParentIndices.size(); + if (aFound == myParentIndices.end()) { + myParentIndices[theParent] = anIndex; + mySubshapes.push_back(ShapeAndSubshapes(theParent, ListOfShape())); + } else + anIndex = aFound->second; + + mySubshapes[anIndex].second.push_back(theShape); } GeomShapePtr FeaturesPlugin_Boolean::ObjectHierarchy::Parent(const GeomShapePtr& theShape, @@ -433,7 +443,7 @@ GeomShapePtr FeaturesPlugin_Boolean::ObjectHierarchy::Parent(const GeomShapePtr& if (theMarkProcessed) { // mark the parent and all its subs as processed by Boolean algorithm myProcessedObjects.insert(aParent); - const ListOfShape& aSubs = mySubshapes[aParent]; + const ListOfShape& aSubs = mySubshapes[myParentIndices[aParent]].second; for (ListOfShape::const_iterator anIt = aSubs.begin(); anIt != aSubs.end(); ++anIt) myProcessedObjects.insert(*anIt); } @@ -473,12 +483,15 @@ void FeaturesPlugin_Boolean::ObjectHierarchy::SplitCompound(const GeomShapePtr& theUsed.clear(); theNotUsed.clear(); - const ListOfShape& aSubs = mySubshapes.find(theCompShape)->second; + MapShapeToIndex::const_iterator aFoundIndex = myParentIndices.find(theCompShape); + if (aFoundIndex == myParentIndices.end()) + return; // no such shape + + const ListOfShape& aSubs = mySubshapes[aFoundIndex->second].second; SetOfShape aSubsSet; aSubsSet.insert(aSubs.begin(), aSubs.end()); - for (GeomAPI_ShapeExplorer anExp(theCompShape, GeomAPI_Shape::SOLID); - anExp.more(); anExp.next()) { + for (GeomAPI_ShapeIterator anExp(theCompShape); anExp.more(); anExp.next()) { GeomShapePtr aCurrent = anExp.current(); if (aSubsSet.find(aCurrent) == aSubsSet.end()) theNotUsed.push_back(aCurrent); @@ -492,6 +505,64 @@ bool FeaturesPlugin_Boolean::ObjectHierarchy::IsEmpty() const return myObjects.empty(); } +void FeaturesPlugin_Boolean::ObjectHierarchy::CompoundsOfUnusedObjects( + ListOfShape& theDestination) const +{ + SetOfShape aUsedObjects; + aUsedObjects.insert(myObjects.begin(), myObjects.end()); + + for (std::vector::const_iterator anIt = mySubshapes.begin(); + anIt != mySubshapes.end(); ++anIt) { + MapShapeToParent::const_iterator aParent = myParent.find(anIt->first); + if ((aParent == myParent.end() || !aParent->second) && + anIt->first->shapeType() == GeomAPI_Shape::COMPOUND) { + // this is a top-level compound + GeomShapePtr aCompound = collectUnusedSubs(anIt->first, aUsedObjects); + // add to destination non-empty compounds only + if (aCompound) + theDestination.push_back(aCompound); + } + } +} + +GeomShapePtr FeaturesPlugin_Boolean::ObjectHierarchy::collectUnusedSubs( + GeomShapePtr theTopLevelCompound, + const SetOfShape& theUsed) const +{ + GeomShapePtr aResult = theTopLevelCompound->emptyCopied(); + bool isResultEmpty = true; + + for (GeomAPI_ShapeIterator aSub(theTopLevelCompound); aSub.more(); aSub.next()) { + GeomShapePtr aCurrent = aSub.current(); + if (theUsed.find(aCurrent) != theUsed.end()) + continue; // already used + + MapShapeToIndex::const_iterator aFoundIndex = myParentIndices.find(aCurrent); + if (aCurrent->shapeType() > GeomAPI_Shape::COMPOUND || + aFoundIndex == myParentIndices.end()) { + bool isAddShape = true; + // check compsolid is fully unused in the Boolean operation + if (aCurrent->shapeType() == GeomAPI_Shape::COMPSOLID) { + for (GeomAPI_ShapeIterator anIt(aCurrent); isAddShape && anIt.more(); anIt.next()) + isAddShape = theUsed.find(anIt.current()) == theUsed.end(); + } + + if (isAddShape) { // low-level shape, add it + GeomAlgoAPI_ShapeBuilder::add(aResult, aCurrent); + isResultEmpty = false; + } + } else { + GeomShapePtr aCompound = collectUnusedSubs(aCurrent, theUsed); + if (aCompound) { + GeomAlgoAPI_ShapeBuilder::add(theTopLevelCompound, aCompound); + isResultEmpty = false; + } + } + } + return isResultEmpty ? GeomShapePtr() : aResult; +} + + FeaturesPlugin_Boolean::ObjectHierarchy::Iterator FeaturesPlugin_Boolean::ObjectHierarchy::Begin() { return Iterator(this); diff --git a/src/FeaturesPlugin/FeaturesPlugin_Boolean.h b/src/FeaturesPlugin/FeaturesPlugin_Boolean.h index a72c3efe9..9f6f21628 100644 --- a/src/FeaturesPlugin/FeaturesPlugin_Boolean.h +++ b/src/FeaturesPlugin/FeaturesPlugin_Boolean.h @@ -59,6 +59,13 @@ public: return MY_TOOL_LIST_ID; } + /// Attribute name of the version of Boolean feature + inline static const std::string& VERSION_ID() + { + static const std::string MY_VERSION_ID("version"); + return MY_VERSION_ID; + } + /// \return boolean operation type. FEATURESPLUGIN_EXPORT OperationType operationType(); @@ -81,13 +88,18 @@ protected: /// Auxiliary class to store hierarchy of Boolean operation objects/tools /// and their parent shapes (compounds or compsolids) class ObjectHierarchy { - typedef std::map MapShapeToSubshapes; + typedef std::pair ShapeAndSubshapes; typedef std::map MapShapeToParent; + typedef std::map MapShapeToIndex; typedef std::set SetOfShape; - ListOfShape myObjects; - MapShapeToParent myParent; - MapShapeToSubshapes mySubshapes; + ListOfShape myObjects; ///< list of objects/tools of Boolean operation + MapShapeToParent myParent; ///< refer a shape to compound/compsolid containing it + /// indices of compounds/compsolids to keep the order of parent shapes + /// corresponding to the order of objects + MapShapeToIndex myParentIndices; + /// list of shape and its subshapes stored according to the index of parent shape + std::vector mySubshapes; SetOfShape myProcessedObjects; @@ -107,6 +119,10 @@ protected: ListOfShape& theUsed, ListOfShape& theNotUsed) const; + /// Generates the list of top-level compounds, which contain the objects of Boolean operation. + /// The generated list will contain only shapes unused during the Boolean operation. + void CompoundsOfUnusedObjects(ListOfShape& theDestination) const; + /// Return \c true if there is no object in hierarchy bool IsEmpty() const; @@ -117,6 +133,10 @@ protected: const GeomAPI_Shape::ShapeType theMinType = GeomAPI_Shape::COMPOUND, const GeomAPI_Shape::ShapeType theMaxType = GeomAPI_Shape::SHAPE) const; + private: + GeomShapePtr collectUnusedSubs(const GeomShapePtr theTopLevelCompound, + const SetOfShape& theUsed) const; + public: class Iterator { friend class ObjectHierarchy; diff --git a/src/FeaturesPlugin/FeaturesPlugin_BooleanFuse.cpp b/src/FeaturesPlugin/FeaturesPlugin_BooleanFuse.cpp index 497d529e4..65e5c0f4c 100644 --- a/src/FeaturesPlugin/FeaturesPlugin_BooleanFuse.cpp +++ b/src/FeaturesPlugin/FeaturesPlugin_BooleanFuse.cpp @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -32,10 +33,15 @@ #include #include #include +#include #include #include #include + #include +#include + +static const int THE_FUSE_VERSION_1 = 20190506; //================================================================================================== FeaturesPlugin_BooleanFuse::FeaturesPlugin_BooleanFuse() @@ -55,6 +61,17 @@ void FeaturesPlugin_BooleanFuse::initAttributes() ModelAPI_Session::get()->validators()->registerNotObligatory(getKind(), OBJECT_LIST_ID()); ModelAPI_Session::get()->validators()->registerNotObligatory(getKind(), TOOL_LIST_ID()); + + AttributePtr aVerAttr = data()->addAttribute(VERSION_ID(), ModelAPI_AttributeInteger::typeId()); + aVerAttr->setIsArgument(false); + ModelAPI_Session::get()->validators()->registerNotObligatory(getKind(), VERSION_ID()); + if (!integer(VERSION_ID())->isInitialized() && + !selectionList(OBJECT_LIST_ID())->isInitialized() && + !selectionList(TOOL_LIST_ID())->isInitialized()) { + // this is a newly created feature (not read from file), + // so, initialize the latest version + integer(VERSION_ID())->setValue(THE_FUSE_VERSION_1); + } } //================================================================================================== @@ -95,6 +112,14 @@ void FeaturesPlugin_BooleanFuse::execute() return; } + // version of FUSE feature + AttributeIntegerPtr aVersionAttr = integer(VERSION_ID()); + int aFuseVersion = 0; + if (aVersionAttr && aVersionAttr->isInitialized()) + aFuseVersion = aVersionAttr->value(); + +//// isSimpleCreation = isSimpleCreation && aFuseVersion < THE_FUSE_VERSION_1; + // Collecting all solids which will be fused. ListOfShape aSolidsToFuse; aSolidsToFuse.insert(aSolidsToFuse.end(), anObjects.begin(), anObjects.end()); @@ -221,6 +246,12 @@ void FeaturesPlugin_BooleanFuse::execute() aMakeShapeList->appendAlgo(aUnifyAlgo); } + if (aFuseVersion == THE_FUSE_VERSION_1) { + // merge hierarchies of compounds containing objects and tools + // and append the result of the FUSE operation + aShape = keepUnusedSubsOfCompound(aShape, anObjectsHierarchy, aToolsHierarchy, aMakeShapeList); + } + int aResultIndex = 0; ResultBodyPtr aResultBody = document()->createBody(data(), aResultIndex); @@ -243,3 +274,32 @@ void FeaturesPlugin_BooleanFuse::execute() // remove the rest results if there were produced in the previous pass removeResults(aResultIndex); } + +//================================================================================================== +GeomShapePtr FeaturesPlugin_BooleanFuse::keepUnusedSubsOfCompound( + const GeomShapePtr& theFuseResult, + const ObjectHierarchy& theObjectsHierarchy, + const ObjectHierarchy& theToolsHierarchy, + std::shared_ptr theMakeShapeList) +{ + ListOfShape aCompounds; + theObjectsHierarchy.CompoundsOfUnusedObjects(aCompounds); + theToolsHierarchy.CompoundsOfUnusedObjects(aCompounds); + + GeomShapePtr aResultShape = theFuseResult; + if (!aCompounds.empty()) { + aResultShape = aCompounds.front(); + aCompounds.pop_front(); + + std::shared_ptr aBuilder(new GeomAlgoAPI_ShapeBuilder); + for (ListOfShape::iterator anIt = aCompounds.begin(); anIt != aCompounds.end(); ++anIt) { + for (GeomAPI_ShapeIterator aSub(*anIt); aSub.more(); aSub.next()) + aBuilder->add(aResultShape, aSub.current()); + } + + aBuilder->add(aResultShape, theFuseResult); + + theMakeShapeList->appendAlgo(aBuilder); + } + return aResultShape; +} diff --git a/src/FeaturesPlugin/FeaturesPlugin_BooleanFuse.h b/src/FeaturesPlugin/FeaturesPlugin_BooleanFuse.h index a16c8781a..f94498406 100644 --- a/src/FeaturesPlugin/FeaturesPlugin_BooleanFuse.h +++ b/src/FeaturesPlugin/FeaturesPlugin_BooleanFuse.h @@ -22,6 +22,8 @@ #include "FeaturesPlugin_Boolean.h" +class GeomAlgoAPI_MakeShapeList; + /// \class FeaturesPlugin_BooleanFuse /// \ingroup Plugins /// \brief Feature for applying of Boolean Fuse operation. @@ -95,6 +97,16 @@ public: /// Use plugin manager for features creation. FeaturesPlugin_BooleanFuse(); + +private: + /// Process unused sub-shapes of compounds. + /// Keep the compound hierarchy, but merge top-level compounds + /// into a single compound and add the result of the FUSE operation. + GeomShapePtr keepUnusedSubsOfCompound( + const GeomShapePtr& theFuseResult, + const ObjectHierarchy& theObjectsHierarchy, + const ObjectHierarchy& theToolsHierarchy, + std::shared_ptr theMakeShapeList); }; #endif diff --git a/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v0_3.py b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v0_3.py index 4e209565d..64de0bacc 100644 --- a/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v0_3.py +++ b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v0_3.py @@ -76,19 +76,6 @@ Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OZ"), 13, 3) Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Extrusion_2_1")]) Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("FACE", "Compound_1_1_2")], True) - -model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc) - model.end() -from GeomAPI import GeomAPI_Shape - -model.testNbResults(Fuse_1, 1) -model.testNbSubResults(Fuse_1, [2]) -model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [2]) -model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [16]) -model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [78]) -model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [156]) -model.testResultsVolumes(Fuse_1, [1589.048622670478835]) - -assert(model.checkPythonDump()) +assert(Fuse_1.feature().error() != "") diff --git a/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v0_4.py b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v0_4.py new file mode 100644 index 000000000..d5329426c --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v0_4.py @@ -0,0 +1,94 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OY"), 15, 3) +LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OX"), -20, 2) +Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchLine_1 = Sketch_1.addLine(10, -5, 0, -5) +SketchLine_2 = Sketch_1.addLine(0, -5, 0, 0) +SketchLine_3 = Sketch_1.addLine(0, 0, 10, 0) +SketchLine_4 = Sketch_1.addLine(10, 0, 10, -5) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) +SketchLine_5 = Sketch_1.addLine(10, -5, 20, -5) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint()) +SketchLine_6 = Sketch_1.addLine(20, -5, 20, 0) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchLine_7 = Sketch_1.addLine(20, 0, 10, 0) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_7.endPoint()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result()) +SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_5.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_8 = SketchProjection_1.createdFeature() +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchAPI_Line(SketchLine_8).startPoint()) +SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10") +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 5) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 10) +Extrusion_1.setNestedSketch(Sketch_1) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1_2/From_Face")) +SketchLine_9 = Sketch_2.addLine(22, 2.5, 6, 2.5) +SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result()) +SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_9.result(), 16) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1_1/From_Face]"), False) +SketchLine_10 = SketchProjection_2.createdFeature() +SketchPoint_1 = Sketch_2.addPoint(10, 2.5) +SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchLine_9.result()) +SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11") +SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_10.result()) +SketchConstraintDistance_1 = Sketch_2.setDistance(SketchLine_9.startPoint(), SketchLine_10.result(), 12, True) +model.do() +Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_9")]) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OZ"), 13, 3) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Extrusion_2_1")]) +Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "LinearCopy_2_1_1_1")]) + +model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Fuse_1, 1) +model.testNbSubResults(Fuse_1, [2]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [2]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [16]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [60]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [120]) +model.testResultsVolumes(Fuse_1, [1589.04862264177882]) + +assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_1.py b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_1.py new file mode 100644 index 000000000..42b7fa94b --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_1.py @@ -0,0 +1,97 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2) +LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0) +LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0) +LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255) +LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ")) +SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0) +SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5) +SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5) +SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False) +SketchLine_5 = SketchProjection_1.createdFeature() +SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result()) +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5) +SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12) +SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15) +SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15) +SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint()) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint()) +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result()) +SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result()) +SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3) +SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10) +SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True) +SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True) +model.do() +Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15) +LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2) +AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")]) +Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0) +Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0) +Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0) +Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0) +Fuse_1_objects_1 = [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("SOLID", "Compound_1_1_1_1"), model.selection("COMPOUND", "Compound_1_1_2")] +Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, False, 20190506) + +model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Fuse_1, 1) +model.testNbSubResults(Fuse_1, [4]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [5]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [50]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [208]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [416]) +model.testResultsVolumes(Fuse_1, [38109.5099691938]) + +assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_2.py b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_2.py new file mode 100644 index 000000000..7cb0da09d --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_2.py @@ -0,0 +1,95 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OY"), 15, 3) +LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OX"), -20, 2) +Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchLine_1 = Sketch_1.addLine(10, -5, 0, -5) +SketchLine_2 = Sketch_1.addLine(0, -5, 0, 0) +SketchLine_3 = Sketch_1.addLine(0, 0, 10, 0) +SketchLine_4 = Sketch_1.addLine(10, 0, 10, -5) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) +SketchLine_5 = Sketch_1.addLine(10, -5, 20, -5) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint()) +SketchLine_6 = Sketch_1.addLine(20, -5, 20, 0) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchLine_7 = Sketch_1.addLine(20, 0, 10, 0) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_7.endPoint()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result()) +SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_5.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_8 = SketchProjection_1.createdFeature() +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchAPI_Line(SketchLine_8).startPoint()) +SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10") +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 5) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 10) +Extrusion_1.setNestedSketch(Sketch_1) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1_2/From_Face")) +SketchLine_9 = Sketch_2.addLine(22, 2.5, 5.999999999999998, 2.5) +SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result()) +SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_9.result(), 16) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1_1/From_Face]"), False) +SketchLine_10 = SketchProjection_2.createdFeature() +SketchPoint_1 = Sketch_2.addPoint(10, 2.5) +SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchLine_9.result()) +SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11") +SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_10.result()) +SketchConstraintDistance_1 = Sketch_2.setDistance(SketchLine_9.startPoint(), SketchLine_10.result(), 12, True) +model.do() +Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_9")]) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OZ"), 13, 3) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Extrusion_2_1")]) +Fuse_1_objects_1 = [model.selection("SOLID", "Compound_1_1_1_1"), model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("FACE", "Compound_1_1_2")] +Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, True, 20190506) + +model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Fuse_1, 1) +model.testNbSubResults(Fuse_1, [3]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [6]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [23]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [70]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [140]) +model.testResultsVolumes(Fuse_1, [5016.039439659862]) + +assert(model.checkPythonDump()) diff --git a/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_3.py b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_3.py new file mode 100644 index 000000000..23e7c75af --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_3.py @@ -0,0 +1,81 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OY"), 15, 3) +LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OX"), -20, 2) +Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchLine_1 = Sketch_1.addLine(10, -5, 0, -5) +SketchLine_2 = Sketch_1.addLine(0, -5, 0, 0) +SketchLine_3 = Sketch_1.addLine(0, 0, 10, 0) +SketchLine_4 = Sketch_1.addLine(10, 0, 10, -5) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) +SketchLine_5 = Sketch_1.addLine(10, -5, 20, -5) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint()) +SketchLine_6 = Sketch_1.addLine(20, -5, 20, 0) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchLine_7 = Sketch_1.addLine(20, 0, 10, 0) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_7.endPoint()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result()) +SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_5.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_8 = SketchProjection_1.createdFeature() +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchAPI_Line(SketchLine_8).startPoint()) +SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10") +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 5) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 10) +Extrusion_1.setNestedSketch(Sketch_1) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1_2/From_Face")) +SketchLine_9 = Sketch_2.addLine(22, 2.5, 5.999999999999998, 2.5) +SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result()) +SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_9.result(), 16) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1_1/From_Face]"), False) +SketchLine_10 = SketchProjection_2.createdFeature() +SketchPoint_1 = Sketch_2.addPoint(10, 2.5) +SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchLine_9.result()) +SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11") +SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_10.result()) +SketchConstraintDistance_1 = Sketch_2.setDistance(SketchLine_9.startPoint(), SketchLine_10.result(), 12, True) +model.do() +Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_9")]) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OZ"), 13, 3) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Extrusion_2_1")]) +Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("FACE", "Compound_1_1_2")], True, 20190506) +model.end() + +assert(Fuse_1.feature().error() != "") diff --git a/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_4.py b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_4.py new file mode 100644 index 000000000..6452a7c60 --- /dev/null +++ b/src/FeaturesPlugin/Test/TestBooleanFuse_MultiLevelCompound_v20190506_4.py @@ -0,0 +1,94 @@ +# Copyright (C) 2014-2019 CEA/DEN, EDF R&D +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# + +from SketchAPI import * + +from salome.shaper import model + +model.begin() +partSet = model.moduleDocument() +Part_1 = model.addPart(partSet) +Part_1_doc = Part_1.document() +Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10) +LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OY"), 15, 3) +LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OX"), -20, 2) +Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0) +Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY")) +SketchLine_1 = Sketch_1.addLine(10, -5, 0, -5) +SketchLine_2 = Sketch_1.addLine(0, -5, 0, 0) +SketchLine_3 = Sketch_1.addLine(0, 0, 10, 0) +SketchLine_4 = Sketch_1.addLine(10, 0, 10, -5) +SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint()) +SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint()) +SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint()) +SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint()) +SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result()) +SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result()) +SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result()) +SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result()) +SketchLine_5 = Sketch_1.addLine(10, -5, 20, -5) +SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint()) +SketchLine_6 = Sketch_1.addLine(20, -5, 20, 0) +SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint()) +SketchLine_7 = Sketch_1.addLine(20, 0, 10, 0) +SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint()) +SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_7.endPoint()) +SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result()) +SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result()) +SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result()) +SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_5.result()) +SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False) +SketchLine_8 = SketchProjection_1.createdFeature() +SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchAPI_Line(SketchLine_8).startPoint()) +SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10") +SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 5) +SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 10) +Extrusion_1.setNestedSketch(Sketch_1) +Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1_2/From_Face")) +SketchLine_9 = Sketch_2.addLine(22, 2.5, 5.999999999999998, 2.5) +SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result()) +SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_9.result(), 16) +SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1_1/From_Face]"), False) +SketchLine_10 = SketchProjection_2.createdFeature() +SketchPoint_1 = Sketch_2.addPoint(10, 2.5) +SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchLine_9.result()) +SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11") +SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_10.result()) +SketchConstraintDistance_1 = Sketch_2.setDistance(SketchLine_9.startPoint(), SketchLine_10.result(), 12, True) +model.do() +Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_9")]) +Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OZ"), 13, 3) +Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Extrusion_2_1")]) +Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "LinearCopy_2_1_1_1")], False, 20190506) + +model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc) + +model.end() + +from GeomAPI import GeomAPI_Shape + +model.testNbResults(Fuse_1, 1) +model.testNbSubResults(Fuse_1, [4]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [7]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [32]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [94]) +model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [188]) +model.testResultsVolumes(Fuse_1, [5516.039439629021]) + +assert(model.checkPythonDump())