--- /dev/null
+# Copyright (C) 2014-2022 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+import sys
+import salome
+from ModelAPI import *
+
+def assertPoint(aPoint):
+ assert(aPoint is not None)
+ aPointFeature = aPoint.feature()
+ assert(len(aPointFeature.results()) > 0)
+ aPointResult = modelAPI_ResultConstruction(aPointFeature.firstResult())
+ assert(aPointResult is not None)
+ assert(aPointResult.isInfinite())
+
+
+salome.salome_init()
+
+###
+### SHAPER component
+###
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+
+### Create Part
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+
+### Create Sketch
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+
+### Create SketchLine
+SketchLine_1 = Sketch_1.addLine(0, 0, 0.5, 1.3)
+model.do()
+
+### Create Edge
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], False)
+
+### Create LinearCopy
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OX"), 4, 5, keepSubResults = True)
+
+### Create Plane
+Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), True)
+Plane_4.setName("Plane_2")
+Plane_4.result().setName("Plane_2")
+Plane_4.result().setTransparency(0.6)
+
+### Create Plane
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 1, False)
+Plane_5.setName("Plane_3")
+Plane_5.result().setName("Plane_3")
+Plane_5.result().setTransparency(0.6)
+
+### Create Plane
+Plane_6 = model.addPlane(Part_1_doc, model.selection("EDGE", "LinearCopy_1_1_2"), model.selection("VERTEX", "LinearCopy_1_1_2/MV:Translated&Sketch_1/SketchLine_1_EndVertex"), True)
+Plane_6.setName("Plane_4")
+Plane_6.result().setName("Plane_4")
+Plane_6.result().setTransparency(0.6)
+
+### Create Plane
+Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_4"), 1, False)
+Plane_7.setName("Plane_5")
+Plane_7.result().setName("Plane_5")
+Plane_7.result().setTransparency(0.6)
+
+### Create Plane
+Plane_8 = model.addPlane(Part_1_doc, model.selection("EDGE", "LinearCopy_1_1_3"), model.selection("VERTEX", "LinearCopy_1_1_3/MV:Translated&Sketch_1/SketchLine_1_EndVertex"), True)
+Plane_8.setName("Plane_6")
+Plane_8.result().setName("Plane_6")
+Plane_8.result().setTransparency(0.6)
+
+### Create Plane
+Plane_9 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_6"), 1, False)
+Plane_9.setName("Plane_7")
+Plane_9.result().setName("Plane_7")
+Plane_9.result().setTransparency(0.6)
+
+### Create Point (by coordinates)
+Point_1 = model.addPoint(Part_1_doc, 16, 0.5, 1.3)
+
+### Create Point (by position on edge)
+Point_2 = model.addPoint(Part_1_doc, model.selection("EDGE", "LinearCopy_1_1_4"), 2.5, False, False)
+
+### Create Point (by projection of point on plane)
+Point_3 = model.addPoint(Part_1_doc, model.selection("VERTEX", "LinearCopy_1_1_3/MV:Translated&Sketch_1/SketchLine_1_EndVertex"), model.selection("FACE", "Plane_7"))
+
+### Create Point (by intersection of axis and plane)
+Point_4 = model.addPoint(Part_1_doc, model.selection("EDGE", "LinearCopy_1_1_2"), model.selection("FACE", "Plane_5"))
+
+### Create Sketch
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
+
+### Create SketchProjection
+SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+
+### Create SketchCircle
+SketchCircle_1 = Sketch_2.addCircle(0, 0, 0.6)
+Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+Sketch_2.setRadius(SketchCircle_1.results()[1], 0.6)
+model.do()
+
+### Create Extrusion
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection(), 0, "Faces|Wires")
+Extrusion_1.result().setTransparency(0.6)
+
+### Create Point (by center of gravity)
+Point_5 = model.addPoint(Part_1_doc, model.selection("SOLID", "Extrusion_1_1"))
+
+### Create Sphere
+Sphere_1 = model.addSphere(Part_1_doc, model.selection("VERTEX", "Point_1"), 0.8)
+
+### Create Cylinder
+Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "Point_2"), model.selection("EDGE", "LinearCopy_1_1_2"), 0.8, 1)
+
+### Create Torus
+Torus_1 = model.addTorus(Part_1_doc, model.selection("VERTEX", "Point_3"), model.selection("EDGE", "LinearCopy_1_1_3"), 0.8, 0.25)
+
+### Create Cone
+Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "Point_4"), model.selection("EDGE", "LinearCopy_1_1_4"), 0.8, 0.3, 1)
+
+### Create Sphere
+Sphere_2 = model.addSphere(Part_1_doc, model.selection("VERTEX", "Point_5"), 0.8)
+
+model.end()
+
+assertPoint(Point_1)
+assertPoint(Point_2)
+assertPoint(Point_3)
+assertPoint(Point_4)
+assertPoint(Point_5)
