Test2377.py
Test2394.py
Test2395.py
+ Test2419_1.py
+ Test2419_2.py
+ Test2419_3.py
)
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "length_assemblage", "10")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 60, 10, 60)
+SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(10, 60, 10, 40)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(10, 40, 20, 40)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(20, 40, 20, 20)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(20, 20, 30, 20)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(30, 20, 30, 0)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
+SketchLine_9 = Sketch_1.addLine(30, 0, 81.26217508737108, 0)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_8.result())
+SketchLine_10 = Sketch_1.addLine(0, 60, 0, 81.26217508737108)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_2.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
+SketchArc_1 = Sketch_1.addArc(4.151438510550382e-034, -3.089278765476956e-034, 81.26217508737108, 0, 0, 81.26217508737108, False)
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_1.center())
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_1.endPoint())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
+SketchArc_2 = Sketch_1.addArc(4.151438510550382e-034, -3.089278765476956e-034, 76.26217508737108, 0, 0, 76.26217508737108, False)
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_2.center())
+SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_23")
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.result(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_24")
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_10.result(), SketchArc_2.endPoint())
+SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_25")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchArc_2.endPoint(), 5, False)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "2*length_assemblage")
+SketchConstraintLength_1.setName("SketchConstraintLength_2")
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_6.result(), "length_assemblage")
+SketchConstraintLength_2.setName("SketchConstraintLength_3")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_7.result())
+SketchConstraintEqual_1.setName("SketchConstraintEqual_2")
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_4.result())
+SketchConstraintEqual_2.setName("SketchConstraintEqual_3")
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_3.result())
+SketchConstraintEqual_3.setName("SketchConstraintEqual_4")
+SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_1.result())
+SketchConstraintEqual_4.setName("SketchConstraintEqual_5")
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")])
+Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
+SketchLine_11 = Sketch_2.addLine(40, 0, 30, 0)
+SketchLine_12 = Sketch_2.addLine(30, 0, 30, 10)
+SketchLine_13 = Sketch_2.addLine(30, 10, 40, 10)
+SketchLine_14 = Sketch_2.addLine(40, 10, 40, 0)
+SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_26")
+SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_12.result())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_14.result())
+SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_13.result(), "length_assemblage")
+SketchConstraintLength_3.setName("SketchConstraintLength_1")
+SketchConstraintEqual_5 = Sketch_2.setEqual(SketchLine_13.result(), SketchLine_14.result())
+SketchConstraintEqual_5.setName("SketchConstraintEqual_1")
+model.do()
+Sketch_2.setName("Sketch_3")
+Sketch_2.result().setName("Sketch_3")
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_14r")])
+Face_2.setName("Face_5")
+Face_2.result().setName("Face_5_1")
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_9"), 10, 2)
+LinearCopy_1.result().setName("LinearCopy")
+LinearCopy_1.result().subResult(0).setName("LinearCopy_1_1_1")
+LinearCopy_1.result().subResult(1).setName("LinearCopy_1_1_2")
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("COMPOUND", "LinearCopy")])
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Boolean_1, 1)
+model.testNbSubResults(Boolean_1, [3])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.FACE, [3])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.EDGE, [20])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.VERTEX, [40])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "length_assemblage", "10")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 60, 10, 60)
+SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(10, 60, 10, 40)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(10, 40, 20, 40)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(20, 40, 20, 20)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(20, 20, 30, 20)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(30, 20, 30, 0)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
+SketchLine_9 = Sketch_1.addLine(30, 0, 81.26217508737108, 0)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_8.result())
+SketchLine_10 = Sketch_1.addLine(0, 60, 0, 81.26217508737108)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_2.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
+SketchArc_1 = Sketch_1.addArc(4.151438510550382e-34, -3.089278765476956e-34, 81.26217508737108, 0, 0, 81.26217508737108, False)
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_1.center())
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_1.endPoint())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
+SketchArc_2 = Sketch_1.addArc(4.151438510550382e-34, -3.089278765476956e-34, 76.26217508737108, 0, 0, 76.26217508737108, False)
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_2.center())
+SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_23")
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.result(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_24")
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_10.result(), SketchArc_2.endPoint())
+SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_25")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchArc_2.endPoint(), 5, False)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "2*length_assemblage")
+SketchConstraintLength_1.setName("SketchConstraintLength_2")
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_6.result(), "length_assemblage")
+SketchConstraintLength_2.setName("SketchConstraintLength_3")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_7.result())
+SketchConstraintEqual_1.setName("SketchConstraintEqual_2")
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_4.result())
+SketchConstraintEqual_2.setName("SketchConstraintEqual_3")
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_3.result())
+SketchConstraintEqual_3.setName("SketchConstraintEqual_4")
+SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_1.result())
+SketchConstraintEqual_4.setName("SketchConstraintEqual_5")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_2.addCircle(9.082839147404137, 71.32948234489588, 2.005056553640547)
+SketchCircle_2 = Sketch_2.addCircle(20.11065019242717, 63.7102674410618, 2.268462537186828)
+SketchCircle_3 = Sketch_2.addCircle(26.52683116407693, 51.67992811921848, 2.727171758268866)
+SketchCircle_4 = Sketch_2.addCircle(38.35666483055617, 58.29661474623231, 3.007584830460834)
+SketchCircle_5 = Sketch_2.addCircle(33.94554041254697, 44.0607132153844, 3.054011155390377)
+SketchCircle_6 = Sketch_2.addCircle(48.58245325412298, 42.45666797247195, 2.346858526438435)
+SketchCircle_7 = Sketch_2.addCircle(38.95818179664835, 31.42885692744893, 3.547307159201095)
+SketchCircle_8 = Sketch_2.addCircle(63.82088306179116, 27.41874382016783, 4.536925074373651)
+SketchCircle_9 = Sketch_2.addCircle(50.18649849703544, 28.4212720969881, 4.820482891521984)
+SketchCircle_10 = Sketch_2.addCircle(49.58498153094326, 15.18789884296047, 2.552020354335177)
+SketchCircle_11 = Sketch_2.addCircle(66.22695092615982, 10.77677442495125, 4.536925074373645)
+SketchCircle_12 = Sketch_2.addCircle(50.98852111849166, 6.165144351577979, 3.547307159201085)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_9f-SketchLine_10r-SketchArc_1_2f-SketchArc_2_2r")])
+Face_3_objects = [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_2_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_5_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_6_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_7_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_9_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_8_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_10_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_12_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_11_2")]
+Face_3 = model.addFace(Part_1_doc, Face_3_objects)
+Face_4_objects = [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_2_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_5_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_7_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_6_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_9_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_8_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_10_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_12_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_11_2"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")]
+Face_4 = model.addFace(Part_1_doc, Face_4_objects)
+Group_1_objects = [model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_12")]
+Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
+Group_1.result().setName("eau")
+Group_1.result().setColor(0, 170, 255)
+Group_2 = model.addGroup(Part_1_doc, [model.selection("FACE", "Face_4_1")])
+Group_2.result().setName("acier")
+Group_2.result().setColor(170, 85, 0)
+Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
+SketchLine_11 = Sketch_3.addLine(40, 0, 30, 0)
+SketchProjection_1 = Sketch_3.addProjection(model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
+SketchLine_12 = Sketch_3.addLine(30, 0, 30, 10)
+SketchLine_13 = Sketch_3.addLine(30, 10, 40, 10)
+SketchLine_14 = Sketch_3.addLine(40, 10, 40, 0)
+SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_26")
+SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_12.result())
+SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_14.result())
+SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_13.result(), "length_assemblage")
+SketchConstraintLength_3.setName("SketchConstraintLength_1")
+SketchConstraintEqual_5 = Sketch_3.setEqual(SketchLine_13.result(), SketchLine_14.result())
+SketchConstraintEqual_5.setName("SketchConstraintEqual_1")
+model.do()
+Face_5 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_14r")])
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_9"), "length_assemblage", 4, model.selection("EDGE", "PartSet/OY"), "length_assemblage", 2)
+Recover_1 = model.addRecover(Part_1_doc, LinearCopy_1, [Face_5.result()])
+Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_1_1")], model.selection("VERTEX", "Sketch_3/Vertex-SketchProjection_1-SketchPoint_1-SketchLine_12s-SketchLine_11e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_6s-SketchLine_5e"))
+LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_1_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 4, model.selection("EDGE", "PartSet/OY"), "length_assemblage", 2)
+Recover_2 = model.addRecover(Part_1_doc, LinearCopy_1, [Face_5.result()])
+Translation_2 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_2_1")], model.selection("VERTEX", "Sketch_3/Vertex-SketchProjection_1-SketchPoint_1-SketchLine_12s-SketchLine_11e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_4s-SketchLine_3e"))
+LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_2_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 4)
+Recover_3 = model.addRecover(Part_1_doc, LinearCopy_1, [Face_5.result()])
+Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_9s-SketchLine_7e"), model.selection("VERTEX", "LinearCopy_3_1/Translated_Edge_1_4&LinearCopy_3_1/Translated_Edge_1_1"))
+LinearCopy_4 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_3_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 3)
+Recover_4 = model.addRecover(Part_1_doc, LinearCopy_1, [Face_5.result()])
+Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_9s-SketchLine_7e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_10s"))
+LinearCopy_5 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_4_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 2)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Boolean_1_objects_2 = [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_12"), model.selection("FACE", "Face_4_1"), model.selection("COMPOUND", "LinearCopy_1_1"), model.selection("COMPOUND", "LinearCopy_2_1"), model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "LinearCopy_4_1"), model.selection("COMPOUND", "LinearCopy_5_1")]
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("COMPOUND", "Partition_1_1")], Boolean_1_objects_2)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Boolean_1, 1)
+model.testNbSubResults(Boolean_1, [60])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.FACE, [60])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.EDGE, [273])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.VERTEX, [546])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "length_assemblage", "10")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 60, 10, 60)
+SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(10, 60, 10, 40)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(10, 40, 20, 40)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(20, 40, 20, 20)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(20, 20, 30, 20)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(30, 20, 30, 0)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
+SketchLine_9 = Sketch_1.addLine(30, 0, 81.26217508737108, 0)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_8.result())
+SketchLine_10 = Sketch_1.addLine(0, 60, 0, 81.26217508737108)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_2.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
+SketchArc_1 = Sketch_1.addArc(4.151438510550382e-34, -3.089278765476956e-34, 81.26217508737108, 0, 0, 81.26217508737108, False)
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_1.center())
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_1.endPoint())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
+SketchArc_2 = Sketch_1.addArc(4.151438510550382e-34, -3.089278765476956e-34, 76.26217508737108, 0, 0, 76.26217508737108, False)
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_2.center())
+SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_23")
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.result(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_24")
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_10.result(), SketchArc_2.endPoint())
+SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_25")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchArc_2.endPoint(), 5, False)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "2*length_assemblage")
+SketchConstraintLength_1.setName("SketchConstraintLength_2")
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_6.result(), "length_assemblage")
+SketchConstraintLength_2.setName("SketchConstraintLength_3")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_7.result())
+SketchConstraintEqual_1.setName("SketchConstraintEqual_2")
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_4.result())
+SketchConstraintEqual_2.setName("SketchConstraintEqual_3")
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_3.result())
+SketchConstraintEqual_3.setName("SketchConstraintEqual_4")
+SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_1.result())
+SketchConstraintEqual_4.setName("SketchConstraintEqual_5")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_2.addCircle(9.082839147404137, 71.32948234489588, 2.005056553640547)
+SketchCircle_2 = Sketch_2.addCircle(20.11065019242717, 63.7102674410618, 2.268462537186828)
+SketchCircle_3 = Sketch_2.addCircle(26.52683116407693, 51.67992811921848, 2.727171758268866)
+SketchCircle_4 = Sketch_2.addCircle(38.35666483055617, 58.29661474623231, 3.007584830460834)
+SketchCircle_5 = Sketch_2.addCircle(33.94554041254697, 44.0607132153844, 3.054011155390377)
+SketchCircle_6 = Sketch_2.addCircle(48.58245325412298, 42.45666797247195, 2.346858526438435)
+SketchCircle_7 = Sketch_2.addCircle(38.95818179664835, 31.42885692744893, 3.547307159201095)
+SketchCircle_8 = Sketch_2.addCircle(63.82088306179116, 27.41874382016783, 4.536925074373651)
+SketchCircle_9 = Sketch_2.addCircle(50.18649849703544, 28.4212720969881, 4.820482891521984)
+SketchCircle_10 = Sketch_2.addCircle(49.58498153094326, 15.18789884296047, 2.552020354335177)
+SketchCircle_11 = Sketch_2.addCircle(66.22695092615982, 10.77677442495125, 4.536925074373645)
+SketchCircle_12 = Sketch_2.addCircle(50.98852111849166, 6.165144351577979, 3.547307159201085)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_9f-SketchLine_10r-SketchArc_1_2f-SketchArc_2_2r")])
+Face_3_objects = [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_2_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_5_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_6_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_7_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_9_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_8_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_10_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_12_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_11_2")]
+Face_3 = model.addFace(Part_1_doc, Face_3_objects)
+Face_4_objects = [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_2_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_5_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_7_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_6_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_9_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_8_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_10_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_12_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_11_2"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")]
+Face_4 = model.addFace(Part_1_doc, Face_4_objects)
+Group_1_objects = [model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_12")]
+Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
+Group_1.result().setName("eau")
+Group_1.result().setColor(0, 170, 255)
+Group_2 = model.addGroup(Part_1_doc, [model.selection("FACE", "Face_4_1")])
+Group_2.result().setName("acier")
+Group_2.result().setColor(170, 85, 0)
+Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
+SketchLine_11 = Sketch_3.addLine(40, 0, 30, 0)
+SketchProjection_1 = Sketch_3.addProjection(model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
+SketchLine_12 = Sketch_3.addLine(30, 0, 30, 10)
+SketchLine_13 = Sketch_3.addLine(30, 10, 40, 10)
+SketchLine_14 = Sketch_3.addLine(40, 10, 40, 0)
+SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_26")
+SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_12.result())
+SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_14.result())
+SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_13.result(), "length_assemblage")
+SketchConstraintLength_3.setName("SketchConstraintLength_1")
+SketchConstraintEqual_5 = Sketch_3.setEqual(SketchLine_13.result(), SketchLine_14.result())
+SketchConstraintEqual_5.setName("SketchConstraintEqual_1")
+model.do()
+Face_5 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_14r")])
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_9"), "length_assemblage", 4, model.selection("EDGE", "PartSet/OY"), "length_assemblage", 2)
+Recover_1 = model.addRecover(Part_1_doc, LinearCopy_1, [Face_5.result()])
+Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_1_1")], model.selection("VERTEX", "Sketch_3/Vertex-SketchProjection_1-SketchPoint_1-SketchLine_12s-SketchLine_11e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_6s-SketchLine_5e"))
+LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_1_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 4, model.selection("EDGE", "PartSet/OY"), "length_assemblage", 2)
+Recover_2 = model.addRecover(Part_1_doc, LinearCopy_1, [Face_5.result()])
+Translation_2 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_2_1")], model.selection("VERTEX", "Sketch_3/Vertex-SketchProjection_1-SketchPoint_1-SketchLine_12s-SketchLine_11e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_4s-SketchLine_3e"))
+LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_2_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 4)
+Recover_3 = model.addRecover(Part_1_doc, LinearCopy_1, [Face_5.result()])
+Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_9s-SketchLine_7e"), model.selection("VERTEX", "LinearCopy_3_1/Translated_Edge_1_4&LinearCopy_3_1/Translated_Edge_1_1"))
+LinearCopy_4 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_3_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 3)
+Recover_4 = model.addRecover(Part_1_doc, LinearCopy_1, [Face_5.result()])
+Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_9s-SketchLine_7e"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_10s"))
+LinearCopy_5 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_4_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 2)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Boolean_1_objects_2 = [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_12"), model.selection("FACE", "Face_4_1"), model.selection("COMPOUND", "LinearCopy_1_1"), model.selection("COMPOUND", "LinearCopy_2_1"), model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "LinearCopy_4_1"), model.selection("COMPOUND", "LinearCopy_5_1")]
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], Boolean_1_objects_2)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Boolean_1, 1)
+model.testNbSubResults(Boolean_1, [0])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.FACE, [60])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.EDGE, [273])
+model.testNbSubShapes(Boolean_1, GeomAPI_Shape.VERTEX, [546])
+
+assert(model.checkPythonDump())
for (ListOfShape::const_iterator
aToolsIt = theTools.begin(); aToolsIt != theTools.end(); aToolsIt++) {
const TopoDS_Shape& aShape = (*aToolsIt)->impl<TopoDS_Shape>();
- anOperation->AddTool(aShape);
+ // #2419: decompose compounds to get the valid result
+ TopTools_ListOfShape aSimpleShapes;
+ prepareShapes(aShape, aSimpleShapes);
+ TopTools_ListIteratorOfListOfShape aSimpleIter(aSimpleShapes);
+ for (; aSimpleIter.More(); aSimpleIter.Next()) {
+ const TopoDS_Shape& aSimpleSh = aSimpleIter.Value();
+ if (ShapesMap.Add(aSimpleSh)) {
+ anOperation->AddTool(aSimpleSh);
+ }
+ }
}
// Building and getting result.
