Update "big models"

diff --git a/test.models/CSWA.py b/test.models/CSWA.py
index 91fe1738c2ceed41b4182f93979708f9002df369..b1f5181dc90fe3882d6641dc27e0fd7cd969422a 100644 (file)
--- a/test.models/CSWA.py
+++ b/test.models/CSWA.py
@@ -195,11 +195,11 @@ SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42")
 model.do()
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_10_2f-SketchLine_16r-SketchLine_18f-SketchLine_19r")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")])
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/From_Face_1"))
-SketchCircle_4 = Sketch_7.addCircle(45, 35, 5)
+SketchCircle_4 = Sketch_7.addCircle(45, -35, 5)
 SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/From_Face_1"))
 SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10)
 SketchConstraintRadius_6 = Sketch_7.setRadius(SketchCircle_4.results()[1], "10/2")
-SketchLine_21 = Sketch_7.addLine(35, 35, 45, 35)
+SketchLine_21 = Sketch_7.addLine(35, -35, 45, -35)
 SketchLine_21.setAuxiliary(True)
 SketchPoint_5 = Sketch_7.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Generated_Face_1&ExtrusionCut_2_1/Generated_Face_4&ExtrusionCut_2_1/From_Face_1"))
 SketchConstraintCoincidence_42 = Sketch_7.setCoincident(SketchLine_21.startPoint(), SketchPoint_5.result())

diff --git a/test.models/angle30.py b/test.models/angle30.py
index da333d57ae7f1a2439b3061afaec5b5dfff9566f..5a37ad7d3c84fffc18e3e81c3b41eeab2a0dcd10 100644 (file)
--- a/test.models/angle30.py
+++ b/test.models/angle30.py
@@ -675,14 +675,14 @@ Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Ge
 SketchLine_67 = Sketch_8.addLine(55, -34.06366588218793, 55, 66.69872981077805)
 SketchLine_67.setName("SketchLine_79")
 SketchLine_67.result().setName("SketchLine_79")
-SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_4&Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_1"))
+SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_13"))
 SketchLine_68 = Sketch_8.addLine(55, -34.06366588218793, 55, 76.69872981077803)
 SketchLine_68.setName("SketchLine_70")
 SketchLine_68.result().setName("SketchLine_70")
 SketchLine_68.setAuxiliary(True)
 SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_10.result())
 SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_120")
-SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_4"))
+SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_13&Extrusion_8_1/Generated_Face_4"))
 SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_11.result())
 SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_121")
 SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -44.9999999570576, 76.69872981077805)
@@ -694,7 +694,7 @@ SketchLine_70.result().setName("SketchLine_71")
 SketchLine_70.setAuxiliary(True)
 SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
 SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_122")
-SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_2&Extrusion_8_1/Generated_Face_3&Extrusion_8_1/Generated_Face_4"))
+SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3&Extrusion_8_1/Generated_Face_4"))
 SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_12.result())
 SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_123")
 SketchLine_71 = Sketch_8.addLine(-55, 66.69872976783566, -55, -34.06366588218793)
@@ -706,7 +706,7 @@ SketchLine_72.result().setName("SketchLine_72")
 SketchLine_72.setAuxiliary(True)
 SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint())
 SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_124")
-SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_4&ExtrusionCut_1_1/Modfied_2&Extrusion_8_1/Generated_Face_3"))
+SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3"))
 SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_13.result())
 SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_125")
 SketchLine_73 = Sketch_8.addLine(-55, -34.06366588218793, -83.25521566485324, -34.06366588218793)

diff --git a/test.models/bearing_puller.py b/test.models/bearing_puller.py
index c6e7f6c47e2c0f797a5877a3cfbc95f308b0e9d1..5a20aecd31e6bb88580ce41ec6c45385229da554 100644 (file)
--- a/test.models/bearing_puller.py
+++ b/test.models/bearing_puller.py
@@ -119,6 +119,8 @@ SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_10.startPoint
 SketchCircle_2 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1"))
 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchCircle_2.results()[1])
 SketchLine_11 = Sketch_2.addLine(15.87713238415337, 2.499999967850816, 39.43375672974065, 43.30127018922192)
+SketchLine_11.setName("SketchLine_11")
+SketchLine_11.result().setName("SketchLine_11")
 SketchLine_12 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX"))
 SketchLine_12.setName("SketchLine_7")
 SketchLine_12.result().setName("SketchLine_7")
@@ -243,7 +245,7 @@ SketchConstraintDistance_10 = Sketch_3.setDistance(SketchCircle_3.center(), Sket
 SketchConstraintDistance_10.setName("SketchConstraintDistance_9")
 SketchConstraintDistance_11 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_28.result(), 40)
 SketchConstraintDistance_11.setName("SketchConstraintDistance_10")
-SketchProjection_1 = Sketch_3.addProjection(model.selection("EDGE", "Cut_2_1/Modified_Face_17&Cut_2_1/Modified_Face_7"))
+SketchProjection_1 = Sketch_3.addProjection(model.selection("EDGE", "Cut_2_1/Modified_Face_divided_20_e_15_1"), False)
 SketchLine_29 = SketchProjection_1.createdFeature()
 SketchLine_29.setName("SketchLine_26")
 SketchLine_29.result().setName("SketchLine_26")
@@ -502,7 +504,7 @@ Extrusion_3 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_2/
 Fuse_1 = model.addFuse(Part_2_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
 Extrusion_4 = model.addExtrusion(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), "Gap", "Gap")
 Cut_1 = model.addCut(Part_2_doc, [model.selection("SOLID", "Fuse_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Cut_1_1")], model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3_2s"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e"))
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Cut_1_1")], model.selection("VERTEX", "Sketch_2/Edge-SketchCircle_2_2__cc"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e"))
 model.do()
 Part_3 = model.duplicatePart(Part_2)
 Part_3.setName("Arm 2")

diff --git a/test.models/bracket32.py b/test.models/bracket32.py
index 42dcf26c4399e669bd1a0cdc903516dec8041e11..de8e95449249c619e68918aa0d7faee55711bcef 100644 (file)
--- a/test.models/bracket32.py
+++ b/test.models/bracket32.py
@@ -398,10 +398,10 @@ model.do()
 Sketch_4 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 SketchCircle_3 = Sketch_4.addCircle(0, 85, 7)
 SketchCircle_4 = Sketch_4.addCircle(0, 55, 7)
-SketchPoint_1 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/Vertex-SketchCircle_1"))
+SketchPoint_1 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/Edge-SketchCircle_1_2__cc"))
 SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_1.coordinates(), SketchCircle_3.center())
 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_19")
-SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/Vertex-SketchCircle_2"))
+SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/Edge-SketchCircle_2_2__cc"))
 SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_2.coordinates(), SketchCircle_4.center())
 SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_20")
 SketchConstraintRadius_9 = Sketch_4.setRadius(SketchCircle_3.results()[1], "TDI/2")
@@ -436,7 +436,7 @@ SketchConstraintMirror_2.setName("SketchConstraintMirror_3")
 model.do()
 Sketch_6 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
 SketchCircle_9 = Sketch_6.addCircle(30, -41, 4)
-SketchPoint_3 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchCircle_5"))
+SketchPoint_3 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Edge-SketchCircle_5_2__cc"))
 SketchConstraintCoincidence_63 = Sketch_6.setCoincident(SketchPoint_3.coordinates(), SketchCircle_9.center())
 SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_21")
 SketchConstraintRadius_12 = Sketch_6.setRadius(SketchCircle_9.results()[1], "BHD/2")
@@ -457,7 +457,7 @@ model.do()
 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, False)
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchLine_41 = Sketch_7.addLine(-41, 0, -41, 8)
-SketchPoint_4 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchCircle_5"))
+SketchPoint_4 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_5/Edge-SketchCircle_5_2__cc"))
 SketchConstraintCoincidence_64 = Sketch_7.setCoincident(SketchLine_41.startPoint(), SketchPoint_4.result())
 SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_34")
 SketchLine_42 = Sketch_7.addLine(-41, 8, -34, 8)
@@ -546,7 +546,7 @@ SketchLine_49.result().setName("SketchLine_55")
 SketchLine_50 = Sketch_8.addLine(32, 0, 41, 0)
 SketchLine_50.setName("SketchLine_49")
 SketchLine_50.result().setName("SketchLine_49")
-SketchPoint_5 = Sketch_8.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchCircle_10"))
+SketchPoint_5 = Sketch_8.addPoint(model.selection("VERTEX", "Sketch_6/Edge-SketchCircle_10_2__cc"))
 SketchConstraintCoincidence_78 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchPoint_5.result())
 SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_50")
 SketchLine_51 = Sketch_8.addLine(41, 0, 41, 8)
@@ -643,7 +643,7 @@ SketchLine_57.result().setName("SketchLine_63")
 SketchLine_58 = Sketch_9.addLine(-32, 0, -41, 0)
 SketchLine_58.setName("SketchLine_57")
 SketchLine_58.result().setName("SketchLine_57")
-SketchPoint_8 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchCircle_11"))
+SketchPoint_8 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_6/Edge-SketchCircle_11_2__cc"))
 SketchConstraintCoincidence_95 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchPoint_8.result())
 SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_67")
 SketchLine_59 = Sketch_9.addLine(-41, 0, -41, 7.999999999999999)
@@ -738,7 +738,7 @@ SketchLine_65.result().setName("SketchLine_71")
 SketchLine_66 = Sketch_10.addLine(32, 0, 41, 0)
 SketchLine_66.setName("SketchLine_65")
 SketchLine_66.result().setName("SketchLine_65")
-SketchPoint_11 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchCircle_12"))
+SketchPoint_11 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_6/Edge-SketchCircle_12_2__cc"))
 SketchConstraintCoincidence_112 = Sketch_10.setCoincident(SketchLine_66.endPoint(), SketchPoint_11.result())
 SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_84")
 SketchLine_67 = Sketch_10.addLine(41, 0, 41, 7.999999999999999)

diff --git a/test.models/case24.py b/test.models/case24.py
index a77f822ff0a23e3253ae7b71b4f9206c5b826035..5db96a7f2679dbf0a1e8438310306d6bd2db7273 100644 (file)
--- a/test.models/case24.py
+++ b/test.models/case24.py
@@ -224,7 +224,7 @@ SketchConstraintParallel_2 = Sketch_4.setParallel(SketchLine_25.result(), Sketch
 SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 3)
 model.do()
 RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_26f-SketchLine_22f-SketchLine_23f-SketchLine_27f-SketchArc_4_2f")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_29"), 0, 71, [model.selection("SOLID", "RevolutionFuse_1_1")])
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
+Sketch_5 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
 SketchLine_30 = Sketch_5.addLine(0, 0, 0, 82)
 SketchLine_31 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OZ"))
 SketchConstraintCoincidence_45 = Sketch_5.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result())
@@ -305,7 +305,7 @@ SketchConstraintDistance_15 = Sketch_5.setDistance(SketchLine_37.startPoint(), S
 SketchConstraintDistance_15.setName("SketchConstraintDistance_16")
 model.do()
 RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_30r-SketchLine_39r-SketchLine_32r-SketchLine_40r-SketchLine_38r-SketchArc_6_2f-SketchArc_7_2r")], model.selection("EDGE", "PartSet/OZ"), 45, 315, [model.selection("SOLID", "RevolutionFuse_2_1")])
-Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
+Sketch_6 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
 SketchLine_38 = Sketch_6.addLine(19.99999999999999, 60, -20, 60)
 SketchLine_38.setName("SketchLine_48")
 SketchLine_38.result().setName("SketchLine_48")
@@ -375,6 +375,8 @@ SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_81")
 SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_38.startPoint(), SketchLine_46.result())
 SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_82")
 SketchLine_49 = Sketch_6.addLine(-19.99999999999998, 30.00000000000001, 20, 30)
+SketchLine_49.setName("SketchLine_49")
+SketchLine_49.result().setName("SketchLine_49")
 SketchLine_49.setAuxiliary(True)
 SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_43.startPoint(), SketchLine_49.startPoint())
 SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_85")
@@ -411,7 +413,7 @@ SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchLine_41.startPoint
 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_156")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), 100, 0, [model.selection("SOLID", "RevolutionFuse_3_1")])
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
+Sketch_7 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
 SketchLine_50 = Sketch_7.addLine(65, 23.09999999999939, 65, 23.00000523211526)
 SketchLine_50.setName("SketchLine_61")
 SketchLine_50.result().setName("SketchLine_61")
@@ -494,7 +496,7 @@ SketchConstraintDistance_21 = Sketch_7.setDistance(SketchLine_50.startPoint(), S
 SketchConstraintDistance_21.setName("SketchConstraintDistance_23")
 model.do()
 RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "PartSet/OZ"), 14.4, 14.4, [model.selection("SOLID", "ExtrusionCut_1_1")])
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
+Sketch_8 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
 SketchCircle_1 = Sketch_8.addCircle(0, 45, 12.5)
 SketchLine_60 = Sketch_8.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_30"))
 SketchLine_60.setName("SketchLine_63")
@@ -536,6 +538,8 @@ SketchLine_67 = Sketch_9.addLine(58, -2, 58.00000000000001, 3.999997221073)
 SketchLine_67.setName("SketchLine_93")
 SketchLine_67.result().setName("SketchLine_93")
 SketchLine_68 = Sketch_9.addLine(58, -2, 58, 8)
+SketchLine_68.setName("SketchLine_68")
+SketchLine_68.result().setName("SketchLine_68")
 SketchLine_68.setAuxiliary(True)
 SketchConstraintCoincidence_103 = Sketch_9.setCoincident(SketchLine_65.endPoint(), SketchLine_68.startPoint())
 SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_113")
@@ -644,11 +648,11 @@ SketchConstraintRadius_9.setName("SketchConstraintRadius_16")
 SketchConstraintRadius_10 = Sketch_9.setRadius(SketchArc_9.results()[1], 4)
 SketchConstraintRadius_10.setName("SketchConstraintRadius_17")
 model.do()
-Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
+Sketch_10 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
 SketchLine_77 = Sketch_10.addLine(64, 20, 89, 20)
 SketchLine_77.setName("SketchLine_76")
 SketchLine_77.result().setName("SketchLine_76")
-SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_4/Vertex-SketchLine_22s-SketchLine_27e-SketchLine_25e"))
+SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_9&RevolutionFuse_2_1/Modfied_6&RevolutionFuse_3_1/Modfied_divided_22_1&RevolutionFuse_2_1/Modfied_11"))
 SketchConstraintCoincidence_122 = Sketch_10.setCoincident(SketchLine_77.startPoint(), SketchPoint_4.result())
 SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_120")
 SketchPoint_5 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_8e-SketchLine_4e"))
@@ -657,10 +661,10 @@ SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_121")
 SketchLine_78 = Sketch_10.addLine(64, -20, 89, -20)
 SketchLine_78.setName("SketchLine_77")
 SketchLine_78.result().setName("SketchLine_77")
-SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_12&RevolutionFuse_1_1/Modfied_5&RevolutionFuse_3_1/Modfied_1divided_f_2&RevolutionFuse_1_1/Modfied_10"))
+SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_10&RevolutionFuse_1_1/Modfied_5&RevolutionFuse_3_1/Modfied_divided_21_1&RevolutionFuse_1_1/Modfied_10"))
 SketchConstraintCoincidence_124 = Sketch_10.setCoincident(SketchLine_78.startPoint(), SketchPoint_6.result())
 SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_122")
-SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_9s-SketchLine_14e-SketchLine_12e"))
+SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_7&ExtrusionFuse_2_1/Modfied_6&RevolutionFuse_3_1/Modfied_10&RevolutionFuse_1_1/Modfied_5"))
 SketchConstraintCoincidence_125 = Sketch_10.setCoincident(SketchLine_78.endPoint(), SketchPoint_7.result())
 SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_123")
 SketchArc_10 = Sketch_10.addArc(89.00000104846708, 1.669244441022778e-015, 89, -20, 89, 20, False)
@@ -683,7 +687,7 @@ SketchConstraintCoincidence_129 = Sketch_10.setCoincident(SketchArc_11.startPoin
 SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_127")
 SketchConstraintTangent_19 = Sketch_10.setTangent(SketchArc_11.results()[1], SketchLine_78.result())
 SketchConstraintTangent_19.setName("SketchConstraintTangent_24")
-SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_1divided_f_2&RevolutionFuse_1_1/Modfied_10&RevolutionFuse_3_1/Modfied_8"))
+SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_divided_21_1&RevolutionFuse_1_1/Modfied_10&RevolutionFuse_3_1/Modfied_8"))
 SketchConstraintCoincidence_130 = Sketch_10.setCoincident(SketchArc_11.endPoint(), SketchPoint_8.result())
 SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_128")
 SketchArc_12 = Sketch_10.addArc(64.00001789135865, 23.01137360115889, 64, 20, 61.15622559702543, 22.02080994708722, True)
@@ -694,7 +698,7 @@ SketchConstraintCoincidence_131 = Sketch_10.setCoincident(SketchArc_12.startPoin
 SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_129")
 SketchConstraintTangent_20 = Sketch_10.setTangent(SketchArc_12.results()[1], SketchLine_77.result())
 SketchConstraintTangent_20.setName("SketchConstraintTangent_25")
-SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_1divided_f_1&RevolutionFuse_2_1/Modfied_11&RevolutionFuse_3_1/Modfied_7"))
+SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_divided_22_1&RevolutionFuse_2_1/Modfied_11&RevolutionFuse_3_1/Modfied_7"))
 SketchConstraintCoincidence_132 = Sketch_10.setCoincident(SketchArc_12.endPoint(), SketchPoint_9.result())
 SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_130")
 SketchLine_79 = Sketch_10.addLine(61.15622559702543, 22.02080994708722, 59.81204392543111, 22.0208099470871)
@@ -735,6 +739,8 @@ SketchLine_91.setName("SketchLine_90")
 SketchLine_91.result().setName("SketchLine_90")
 SketchLine_90.setName("SketchLine_85")
 SketchLine_90.result().setName("SketchLine_85")
+SketchLine_89.setName("SketchLine_89")
+SketchLine_89.result().setName("SketchLine_89")
 SketchLine_88.setName("SketchLine_84")
 SketchLine_88.result().setName("SketchLine_84")
 SketchLine_87.setName("SketchLine_88")
@@ -763,7 +769,7 @@ SketchArc_13.result().setName("SketchArc_16")
 SketchArc_13.results()[1].setName("SketchArc_16_2")
 model.do()
 ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchArc_16_2f-SketchLine_81r-SketchLine_82f-SketchArc_17_2r-SketchLine_83f-SketchLine_84f-SketchLine_85r-SketchArc_18_2r"), model.selection("FACE", "Sketch_10/Face-SketchArc_19_2f-SketchLine_86r-SketchLine_87f-SketchArc_20_2r-SketchLine_88f-SketchLine_89f-SketchLine_90r-SketchArc_21_2r")], model.selection(), 20, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-Sketch_11 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
+Sketch_11 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
 SketchCircle_2 = Sketch_11.addCircle(89, 0, 6)
 SketchPoint_11 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_2/Vertex-SketchPoint_1-SketchLine_10s-SketchLine_9e"))
 SketchConstraintCoincidence_139 = Sketch_11.setCoincident(SketchCircle_2.center(), SketchPoint_11.result())

diff --git a/test.models/clothespin.py b/test.models/clothespin.py
index f84b88985d775b542cf631b6036dedc6361a04ff..f69307ae2dc8c60964a7d60e3823d10a103914b7 100644 (file)
--- a/test.models/clothespin.py
+++ b/test.models/clothespin.py
@@ -370,7 +370,7 @@ SketchLine_41.setName("SketchLine_43")
 SketchLine_41.result().setName("SketchLine_43")
 model.do()
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_7"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_6&ExtrusionCut_3_1/Modfied_3"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_7"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_5&ExtrusionCut_3_1/Modfied_3"))
 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchArc_4 = Sketch_5.addArc(25, -7.50002056854448, 22, -7.5, 28, -7.5, True)
 SketchPoint_5 = Sketch_5.addPoint(22, -7.5)
@@ -465,7 +465,7 @@ SketchLine_56.setName("SketchLine_58")
 SketchLine_56.result().setName("SketchLine_58")
 model.do()
 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_9"))
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_8"))
 SketchLine_64 = Sketch_7.addLine(50.25, -4.5, 31.25, -4.5)
 SketchLine_64.setName("SketchLine_76")
 SketchLine_64.result().setName("SketchLine_76")
@@ -788,7 +788,7 @@ SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchPoint_21.coordina
 SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_145")
 model.do()
 ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")])
-Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_26"))
+Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_14"))
 SketchLine_94 = Sketch_9.addLine(21, 4.163450069699051, 21, 0)
 SketchLine_94.setName("SketchLine_107")
 SketchLine_94.result().setName("SketchLine_107")
@@ -1305,7 +1305,7 @@ SketchLine_147.setName("SketchLine_43")
 SketchLine_147.result().setName("SketchLine_43")
 model.do()
 ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_7"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_6&ExtrusionCut_3_1/Modfied_3"))
+Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_7"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_5&ExtrusionCut_3_1/Modfied_3"))
 Sketch_15 = model.addSketch(Part_2_doc, model.selection("FACE", "Plane_1"))
 SketchArc_27 = Sketch_15.addArc(25, -7.50002056854448, 22, -7.5, 28, -7.5, True)
 SketchPoint_29 = Sketch_15.addPoint(22, -7.5)
@@ -1400,7 +1400,7 @@ SketchLine_162.setName("SketchLine_58")
 SketchLine_162.result().setName("SketchLine_58")
 model.do()
 ExtrusionFuse_2 = model.addExtrusionFuse(Part_2_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
-Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_9"))
+Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_8"))
 SketchLine_170 = Sketch_17.addLine(50.25, -4.5, 31.25, -4.5)
 SketchLine_170.setName("SketchLine_76")
 SketchLine_170.result().setName("SketchLine_76")
@@ -1723,7 +1723,7 @@ SketchConstraintCoincidence_316 = Sketch_18.setCoincident(SketchPoint_45.coordin
 SketchConstraintCoincidence_316.setName("SketchConstraintCoincidence_145")
 model.do()
 ExtrusionCut_16 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")])
-Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_26"))
+Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_14"))
 SketchLine_200 = Sketch_19.addLine(21, 4.163450069699051, 21, 0)
 SketchLine_200.setName("SketchLine_107")
 SketchLine_200.result().setName("SketchLine_107")
@@ -1893,8 +1893,8 @@ SketchConstraintDistance_34 = Sketch_20.setDistance(SketchLine_211.result(), Ske
 model.do()
 ExtrusionCut_18 = model.addExtrusionCut(Part_2_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")])
 model.do()
-Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/ExtrusionCut_9_1/Modfied_1&ExtrusionCut_7_1/Modfied_31"), 180)
-Placement_1 = model.addPlacement(partSet, [model.selection("COMPOUND", "Rotation_1/")], model.selection("FACE", "Rotation_1/ExtrusionCut_5_1/Modfied_1"), model.selection("FACE", "Part_1/ExtrusionCut_5_1/Modfied_1"), False, True)
+Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/ExtrusionCut_9_1/Modfied_1&ExtrusionCut_7_1/Modfied_19"), 180)
+Placement_1 = model.addPlacement(partSet, [model.selection("COMPOUND", "Rotation_1/")], model.selection("FACE", "Rotation_1/ExtrusionCut_5_1/Modfied_5"), model.selection("FACE", "Part_1/ExtrusionCut_5_1/Modfied_5"), False, True)
 Rotation_2 = model.addRotation(partSet, [model.selection("COMPOUND", "Placement_1/")], model.selection("EDGE", "Part_1/ExtrusionCut_5_1/Modfied_5&ExtrusionCut_8_1/Modfied_3"), 7)
 Rotation_2.result().setColor(255, 85, 0)
 model.end()

diff --git a/test.models/ecran.py b/test.models/ecran.py
index 47effa5004651642e146ac0703d8208ae31abcaf..726b5099f25cc98eaf227f02717dd535fed9fdde 100644 (file)
--- a/test.models/ecran.py
+++ b/test.models/ecran.py
@@ -117,6 +117,7 @@ SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_5.result(), S
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.")
 Extrusion_1.setName("Profil")
+Extrusion_1.result().setName("Extrusion_1_1")
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
 SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3)
 SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
@@ -157,6 +158,7 @@ SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_1.setName("Decoupe_Angle")
+ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"))
 SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3)
 SketchLine_22.setName("SketchLine_29")
@@ -204,6 +206,7 @@ Sketch_3.setName("Sketch_4")
 Sketch_3.result().setName("Sketch_4")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionCut_2.setName("Chamfrein_1")
+ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"))
 SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3)
 SketchLine_30.setName("SketchLine_35")
@@ -372,11 +375,11 @@ SketchConstraintLength_8.setName("SketchConstraintLength_9")
 SketchConstraintLength_9 = Sketch_5.setLength(SketchLine_44.result(), 8)
 SketchConstraintLength_9.setName("SketchConstraintLength_10")
 SketchConstraintEqual_4 = Sketch_5.setEqual(SketchLine_47.result(), SketchLine_53.result())
-SketchPoint_5 = Sketch_5.addPoint(153.5, -28.84999053274707)
+SketchPoint_5 = Sketch_5.addPoint(153.5, -28.85)
 SketchPoint_5.setName("SketchPoint_7")
 SketchPoint_5.result().setName("SketchPoint_7")
 SketchConstraintMiddle_1 = Sketch_5.setMiddlePoint(SketchPoint_5.coordinates(), SketchLine_42.result())
-SketchLine_55 = Sketch_5.addLine(153.5, -28.84999053274707, -153.5, -28.84999053274707)
+SketchLine_55 = Sketch_5.addLine(153.5, -28.85, -153.5, -28.85)
 SketchLine_55.setName("SketchLine_54")
 SketchLine_55.result().setName("SketchLine_54")
 SketchLine_55.setAuxiliary(True)
@@ -508,28 +511,28 @@ Sketch_5.setName("Sketch_6")
 Sketch_5.result().setName("Sketch_6")
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")])
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_1"))
-SketchArc_11 = Sketch_6.addArc(44.89, -23.54999053274703, 43.89, -23.54999053274703, 44.89, -22.54999053274703, False)
-SketchArc_12 = Sketch_6.addArc(44.89, -13.54999053274703, 44.89, -14.54999053274703, 43.89, -13.54999053274703, False)
-SketchArc_13 = Sketch_6.addArc(5.89, -13.54999053274703, 6.89, -13.54999053274703, 5.89, -14.54999053274703, False)
+SketchArc_11 = Sketch_6.addArc(44.89, -23.55, 43.89, -23.55, 44.89, -22.55, False)
+SketchArc_12 = Sketch_6.addArc(44.89, -13.55, 44.89, -14.55, 43.89, -13.55, False)
+SketchArc_13 = Sketch_6.addArc(5.89, -13.55, 6.89, -13.55, 5.89, -14.55, False)
 SketchArc_13.setName("SketchArc_14")
 SketchArc_13.result().setName("SketchArc_14")
 SketchArc_13.results()[1].setName("SketchArc_14_2")
-SketchLine_76 = Sketch_6.addLine(6.89, -23.54999053274703, 43.89, -23.54999053274703)
+SketchLine_76 = Sketch_6.addLine(6.89, -23.55, 43.89, -23.55)
 SketchLine_76.setName("SketchLine_81")
 SketchLine_76.result().setName("SketchLine_81")
 SketchConstraintCoincidence_92 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_76.endPoint())
 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_98")
-SketchLine_77 = Sketch_6.addLine(6.89, -13.54999053274703, 43.89, -13.54999053274703)
+SketchLine_77 = Sketch_6.addLine(6.89, -13.55, 43.89, -13.55)
 SketchLine_77.setName("SketchLine_82")
 SketchLine_77.result().setName("SketchLine_82")
 SketchConstraintCoincidence_93 = Sketch_6.setCoincident(SketchArc_13.startPoint(), SketchLine_77.startPoint())
 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_99")
-SketchLine_78 = Sketch_6.addLine(44.89, -22.54999053274703, 44.89, -14.54999053274703)
+SketchLine_78 = Sketch_6.addLine(44.89, -22.55, 44.89, -14.55)
 SketchLine_78.setName("SketchLine_83")
 SketchLine_78.result().setName("SketchLine_83")
 SketchConstraintCoincidence_94 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_78.endPoint())
 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_100")
-SketchLine_79 = Sketch_6.addLine(5.89, -22.54999053274703, 5.89, -14.54999053274703)
+SketchLine_79 = Sketch_6.addLine(5.89, -22.55, 5.89, -14.55)
 SketchLine_79.setName("SketchLine_84")
 SketchLine_79.result().setName("SketchLine_84")
 SketchConstraintCoincidence_95 = Sketch_6.setCoincident(SketchArc_13.endPoint(), SketchLine_79.endPoint())
@@ -568,7 +571,7 @@ SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/Edge-SketchLi
 SketchLine_81.setName("SketchLine_86")
 SketchLine_81.result().setName("SketchLine_86")
 SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_76.endPoint(), SketchLine_81.result(), 5.3)
-SketchArc_14 = Sketch_6.addArc(5.89, -23.54999053274703, 5.89, -22.54999053274703, 6.89, -23.54999053274703, False)
+SketchArc_14 = Sketch_6.addArc(5.89, -23.55, 5.89, -22.55, 6.89, -23.55, False)
 SketchArc_14.setName("SketchArc_15")
 SketchArc_14.result().setName("SketchArc_15")
 SketchArc_14.results()[1].setName("SketchArc_15_2")
@@ -582,13 +585,13 @@ SketchConstraintCoincidence_107 = Sketch_6.setCoincident(SketchArc_14.center(),
 SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_114")
 SketchConstraintEqual_10 = Sketch_6.setEqual(SketchArc_11.results()[1], SketchArc_14.results()[1])
 SketchConstraintEqual_10.setName("SketchConstraintEqual_11")
-SketchPoint_6 = Sketch_6.addPoint(0, -28.84999053274704)
+SketchPoint_6 = Sketch_6.addPoint(0, -28.85)
 SketchPoint_6.setName("SketchPoint_8")
 SketchPoint_6.result().setName("SketchPoint_8")
-SketchPoint_7 = Sketch_6.addPoint(50.77, -28.84999053274703)
+SketchPoint_7 = Sketch_6.addPoint(50.77, -28.85)
 SketchPoint_7.setName("SketchPoint_9")
 SketchPoint_7.result().setName("SketchPoint_9")
-SketchPoint_8 = Sketch_6.addPoint(101.54, -28.84999053274702)
+SketchPoint_8 = Sketch_6.addPoint(101.54, -28.85)
 SketchPoint_8.setName("SketchPoint_10")
 SketchPoint_8.result().setName("SketchPoint_10")
 SketchConstraintCoincidence_108 = Sketch_6.setCoincident(SketchLine_80.result(), SketchPoint_6.coordinates())
@@ -710,7 +713,7 @@ SketchArc_24.results()[1].setName("SketchArc_25_2")
 SketchArc_23.setName("SketchArc_24")
 SketchArc_23.result().setName("SketchArc_24")
 SketchArc_23.results()[1].setName("SketchArc_24_2")
-SketchPoint_9 = Sketch_6.addPoint(0, -49.84999053274704)
+SketchPoint_9 = Sketch_6.addPoint(0, -49.85)
 SketchPoint_9.setName("SketchPoint_11")
 SketchPoint_9.result().setName("SketchPoint_11")
 SketchConstraintCoincidence_112 = Sketch_6.setCoincident(SketchPoint_9.coordinates(), SketchLine_80.result())
@@ -844,28 +847,28 @@ Sketch_6.setName("Sketch_7")
 Sketch_6.result().setName("Sketch_7")
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")])
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1"))
-SketchLine_126 = Sketch_7.addLine(-153.5, -37.049990532747, -152.3000099350335, -37.0499905327475)
+SketchLine_126 = Sketch_7.addLine(-153.5, -37.05, -152.3, -37.05)
 SketchLine_126.setName("SketchLine_135")
 SketchLine_126.result().setName("SketchLine_135")
-SketchLine_127 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -43.54999111476925)
+SketchLine_127 = Sketch_7.addLine(-150.8, -38.55, -150.8, -43.55)
 SketchLine_127.setName("SketchLine_138")
 SketchLine_127.result().setName("SketchLine_138")
 SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_67s-SketchLine_68e-SketchLine_69e"))
 SketchPoint_10.setName("SketchPoint_12")
 SketchPoint_10.result().setName("SketchPoint_12")
-SketchLine_128 = Sketch_7.addLine(-150.8, -45.049990532747, -153.5, -45.04999053274734)
+SketchLine_128 = Sketch_7.addLine(-150.8, -45.05, -153.5, -45.05)
 SketchLine_128.setName("SketchLine_131")
 SketchLine_128.result().setName("SketchLine_131")
 SketchLine_128.setAuxiliary(True)
 SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchPoint_10.result())
 SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_120")
-SketchLine_129 = Sketch_7.addLine(-153.5, -45.04999053274734, -153.5, -37.049990532747)
+SketchLine_129 = Sketch_7.addLine(-153.5, -45.05, -153.5, -37.05)
 SketchLine_129.setName("SketchLine_132")
 SketchLine_129.result().setName("SketchLine_132")
-SketchLine_130 = Sketch_7.addLine(-152.2999985784279, -45.04999053274759, -153.5, -45.04999053274734)
+SketchLine_130 = Sketch_7.addLine(-152.3, -45.05, -153.5, -45.05)
 SketchLine_130.setName("SketchLine_137")
 SketchLine_130.result().setName("SketchLine_137")
-SketchLine_131 = Sketch_7.addLine(-150.8, -37.04999053274745, -150.8, -45.049990532747)
+SketchLine_131 = Sketch_7.addLine(-150.8, -37.05, -150.8, -45.05)
 SketchLine_131.setName("SketchLine_134")
 SketchLine_131.result().setName("SketchLine_134")
 SketchLine_131.setAuxiliary(True)
@@ -873,7 +876,7 @@ SketchConstraintCoincidence_114 = Sketch_7.setCoincident(SketchLine_131.endPoint
 SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_121")
 SketchConstraintCoincidence_115 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchLine_129.startPoint())
 SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_122")
-SketchLine_132 = Sketch_7.addLine(-153.5, -37.049990532747, -150.8, -37.04999053274745)
+SketchLine_132 = Sketch_7.addLine(-153.5, -37.05, -150.8, -37.05)
 SketchLine_132.setName("SketchLine_133")
 SketchLine_132.result().setName("SketchLine_133")
 SketchLine_132.setAuxiliary(True)
@@ -890,11 +893,11 @@ SketchPoint_11.setName("SketchPoint_13")
 SketchPoint_11.result().setName("SketchPoint_13")
 SketchConstraintCoincidence_118 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchPoint_11.result())
 SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_125")
-SketchArc_59 = Sketch_7.addArc(-152.3, -38.54999053274712, -150.8, -38.54999290880026, -152.3000099350335, -37.0499905327475, False)
+SketchArc_59 = Sketch_7.addArc(-152.3, -38.55, -150.8, -38.55, -152.3000099350335, -37.05, False)
 SketchArc_59.setName("SketchArc_60")
 SketchArc_59.result().setName("SketchArc_60")
 SketchArc_59.results()[1].setName("SketchArc_60_2")
-SketchLine_133 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -45.049990532747)
+SketchLine_133 = Sketch_7.addLine(-150.8, -38.55, -150.8, -45.05)
 SketchLine_133.setName("SketchLine_136")
 SketchLine_133.result().setName("SketchLine_136")
 SketchLine_133.setAuxiliary(True)
@@ -912,7 +915,7 @@ SketchConstraintCoincidence_123 = Sketch_7.setCoincident(SketchLine_126.endPoint
 SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_130")
 SketchConstraintCoincidence_124 = Sketch_7.setCoincident(SketchLine_133.startPoint(), SketchLine_131.result())
 SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_131")
-SketchArc_60 = Sketch_7.addArc(-152.3, -43.54999053274783, -152.2999985784279, -45.04999053274759, -150.8, -43.54999111476925, False)
+SketchArc_60 = Sketch_7.addArc(-152.3, -43.55, -152.3, -45.05, -150.8, -43.55, False)
 SketchArc_60.setName("SketchArc_61")
 SketchArc_60.result().setName("SketchArc_61")
 SketchArc_60.results()[1].setName("SketchArc_61_2")

diff --git a/test.models/flange.py b/test.models/flange.py
index e3f64e294a49fa65c41f3d8499f3e96b47d13211..bf7d9362d22089748f75a6cce33a0715b7450e94 100644 (file)
--- a/test.models/flange.py
+++ b/test.models/flange.py
@@ -110,7 +110,7 @@ SketchLine_16.setName("SketchLine_17")
 SketchLine_16.result().setName("SketchLine_17")
 SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_16.result())
 model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_12f-SketchLine_13f-SketchLine_17r-SketchLine_18r-SketchArc_10_2f")], model.selection(), "172/2", "172/2")
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_12f-SketchLine_13f-SketchArc_10_2f-SketchLine_17r-SketchLine_18r")], model.selection(), "172/2", "172/2")
 Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_10"))
 SketchLine_18 = Sketch_4.addLine(-65, 16, -65, -16)

diff --git a/test.models/gear.py b/test.models/gear.py
index 4c042e49a6bb4dc032d372cc78613b283f00ddac..217e25a83edf60e96a938dc7054cccacd692e710 100644 (file)
--- a/test.models/gear.py
+++ b/test.models/gear.py
@@ -46,7 +46,6 @@ SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(),
 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
-SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_8.result())
 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_1.endPoint(), SketchLine_8.result(), 30)
 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_3.result(), 37.5)

diff --git a/test.models/idler_plate.py b/test.models/idler_plate.py
index 2b08107f3cc0593d37b3adaed69108161858dccb..c00585ba777ab899e24095e55e8ba488f3c820f0 100644 (file)
--- a/test.models/idler_plate.py
+++ b/test.models/idler_plate.py
@@ -151,12 +151,12 @@ SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result())
 SketchConstraintTangent_15 = Sketch_2.setTangent(SketchLine_8.result(), SketchArc_17.results()[1])
 SketchConstraintTangent_16 = Sketch_2.setTangent(SketchArc_17.results()[1], SketchLine_9.result())
-SketchPoint_4 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchCircle_2-SketchArc_9"))
+SketchPoint_4 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Edge-SketchCircle_2_2__cc"))
 SketchCircle_3 = Sketch_2.addCircle(-7.5, 18.75, 8.125)
 SketchConstraintCoincidence_48 = Sketch_2.setCoincident(SketchPoint_4.result(), SketchCircle_3.center())
 SketchArc_19 = Sketch_2.addArc(model.selection("EDGE", "Sketch_1/Edge-SketchArc_9_2"))
 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchCircle_3.results()[1], SketchArc_19.results()[1])
-SketchPoint_5 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchArc_1-SketchArc_3-SketchArc_4-SketchCircle_1-SketchArc_11-SketchArc_14-SketchLine_1s-SketchLine_2s-SketchLine_5s"))
+SketchPoint_5 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Edge-SketchCircle_1_2__cc"))
 SketchCircle_4 = Sketch_2.addCircle(0, 0, 8.75)
 SketchConstraintCoincidence_49 = Sketch_2.setCoincident(SketchPoint_5.result(), SketchCircle_4.center())
 SketchConstraintRadius_12 = Sketch_2.setRadius(SketchCircle_4.results()[1], "17.5/2")

diff --git a/test.models/piece_02.py b/test.models/piece_02.py
index 6c10f5b7ff8e9b06b68cd8cd82844e41bb7d696a..95025acd1dc4e519f76da729a1ddf9019a66a713 100644 (file)
--- a/test.models/piece_02.py
+++ b/test.models/piece_02.py
@@ -220,8 +220,6 @@ SketchLine_25.setName("SketchLine_26")
 SketchLine_25.result().setName("SketchLine_26")
 SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_19.result())
 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_39")
-SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchLine_19.result())
-SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_40")
 SketchLine_26 = Sketch_4.addLine(42, -33, 42, -43)
 SketchLine_26.setName("SketchLine_27")
 SketchLine_26.result().setName("SketchLine_27")
@@ -262,8 +260,6 @@ SketchLine_27 = Sketch_4.addLine(0, -38, 42, -38)
 SketchLine_27.setName("SketchLine_28")
 SketchLine_27.result().setName("SketchLine_28")
 SketchLine_27.setAuxiliary(True)
-SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchLine_27.startPoint(), SketchLine_19.result())
-SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_51")
 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_20.result())
 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52")
 SketchConstraintMiddle_10 = Sketch_4.setMiddlePoint(SketchLine_27.endPoint(), SketchLine_20.result())

diff --git a/test.models/piece_09.py b/test.models/piece_09.py
index b10608231e774f5a442db59132134955aca87c66..99e22b96c4a2ac7fe205f2acc76e588c865d8b50 100644 (file)
--- a/test.models/piece_09.py
+++ b/test.models/piece_09.py
@@ -135,8 +135,7 @@ SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_6.
 SketchConstraintEqual_4 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_4.results()[1])
 SketchConstraintEqual_5 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_5.result())
 SketchConstraintEqual_6 = Sketch_1.setEqual(SketchLine_9.result(), SketchLine_11.result())
-SketchConstraintEqual_7 = Sketch_1.setEqual(SketchArc_6.results()[1], SketchArc_7.results()[1])
-SketchConstraintEqual_8 = Sketch_1.setEqual(SketchLine_7.result(), SketchLine_13.result())
+SketchConstraintEqual_7 = Sketch_1.setEqual(SketchLine_7.result(), SketchLine_13.result())
 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "epaisseur*coeff")
 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_5.endPoint(), SketchLine_3.result(), "epaisseur*coeff")
 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchArc_6.endPoint(), SketchLine_4.result(), "epaisseur*coeff")
@@ -181,11 +180,9 @@ SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_21.endPoint()
 SketchConstraintTangent_20 = Sketch_2.setTangent(SketchLine_21.result(), SketchArc_12.results()[1])
 SketchLine_22 = Sketch_2.addLine(-31.25, -32.50000000000001, -25.00000000000001, -32.50000000000001)
 SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchArc_12.endPoint(), SketchLine_22.startPoint())
-#SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_15).startPoint(), SketchLine_22.endPoint())
 SketchLine_23 = Sketch_2.addLine(-24.99999999999999, -35.00000000000001, -24.99999999999999, -32.50000000000002)
-SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_23.startPoint())
-#SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_15).startPoint(), SketchLine_23.endPoint())
-SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchLine_22.endPoint(), SketchLine_23.endPoint())
+SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_23.startPoint())
+SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchLine_22.endPoint(), SketchLine_23.endPoint())
 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_16.result())
 SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_22.result())
 SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_20.result())
@@ -204,21 +201,17 @@ SketchConstraintDistance_9 = Sketch_2.setDistance(SketchLine_21.endPoint(), Sket
 SketchConstraintDistance_10 = Sketch_2.setDistance(SketchArc_11.startPoint(), SketchLine_18.result(), "epaisseur*coeff")
 SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchAPI_Line(SketchLine_14).endPoint())
 SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
-#SketchConstraintDistance_11 = Sketch_2.setDistance(SketchLine_16.result(), SketchPoint_2.coordinates(), "(h4-d_diff)*coeff")
-SketchConstraintDistance_12 = Sketch_2.setDistance(SketchPoint_2.coordinates(), SketchLine_17.result(), "e3*coeff")
-#SketchConstraintCoincidence_40 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_15.result())
+SketchConstraintDistance_11 = Sketch_2.setDistance(SketchPoint_2.coordinates(), SketchLine_17.result(), "e3*coeff", False)
 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_9.results()[1], "r2*coeff")
 SketchConstraintEqual_9 = Sketch_2.setEqual(SketchArc_9.results()[1], SketchArc_10.results()[1])
 SketchConstraintEqual_10 = Sketch_2.setEqual(SketchArc_11.results()[1], SketchArc_12.results()[1])
 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchArc_12.results()[1], "r3*coeff")
 SketchConstraintDistance_13 = Sketch_2.setDistance(SketchArc_10.startPoint(), SketchLine_19.result(), "d8*coeff")
-#SketchConstraintDistance_14 = Sketch_2.setDistance(SketchLine_17.startPoint(), SketchLine_23.result(), "(e3-epaisseur_plat)*coeff")
 model.do()
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_16r-SketchArc_9_2f-SketchLine_17r-SketchArc_10_2f-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchArc_11_2r-SketchLine_21r-SketchArc_12_2r-SketchLine_22r-SketchLine_23f")], model.selection(), "d6*coeff", 0)
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face_3"))
 SketchLine_24 = Sketch_3.addLine(46.25, 22.91561885925604, 51.3, 20.00000000000001)
 SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1"))
-#SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_24.startPoint(), SketchLine_25.result())
 SketchLine_26 = Sketch_3.addLine(51.3, 20.00000000000001, 62.50000000000001, 20.00000000000001)
 SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchLine_24.endPoint(), SketchLine_26.startPoint())
 SketchLine_27 = Sketch_3.addLine(62.50000000000001, 20.00000000000001, 62.5, -4.999999999999999)

diff --git a/test.models/piece_12.py b/test.models/piece_12.py
index 391436d0459db8db1e5e5b6d2706b78ca3cfbe9a..05c3b5107c30ed51b01caa00932b50a4d658ed83 100644 (file)
--- a/test.models/piece_12.py
+++ b/test.models/piece_12.py
@@ -462,7 +462,6 @@ SketchConstraintVertical_6 = Sketch_4.setVertical(SketchLine_31.result())
 SketchConstraintVertical_6.setName("SketchConstraintVertical_3")
 SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_32.result())
 SketchConstraintVertical_7.setName("SketchConstraintVertical_4")
-SketchConstraintHorizontal_9 = Sketch_4.setHorizontal(SketchLine_30.result())
 SketchConstraintEqual_7 = Sketch_4.setEqual(SketchLine_31.result(), SketchLine_32.result())
 SketchConstraintEqual_7.setName("SketchConstraintEqual_5")
 SketchConstraintMiddle_4 = Sketch_4.setMiddlePoint(SketchLine_30.result(), SketchAPI_Line(SketchLine_29).startPoint())
@@ -518,10 +517,10 @@ SketchConstraintLength_10 = Sketch_4.setLength(SketchLine_36.result(), 12.975642
 SketchConstraintLength_10.setName("SketchConstraintLength_7")
 model.do()
 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0)
-Smash_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_6_1_1"), model.selection("SOLID", "Extrusion_4_1")], [model.selection("SOLID", "ExtrusionCut_6_1_2")])
-ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Smash_2_1_1")])
+Smash_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1")], [model.selection("COMPSOLID", "ExtrusionCut_6_1")])
+ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Smash_2_1_3")])
 ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_7_1_1")])
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Smash_2_1_1/Modified_Face_1"))
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Smash_2_1_3/Modified_Face_1"))
 SketchPoint_3 = Sketch_5.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 SketchPoint_3.setName("SketchPoint_2")
 SketchPoint_3.result().setName("SketchPoint_2")
@@ -780,6 +779,8 @@ Parameter_Epaisseur.setValue(33.9)
 model.do()
 model.testResultsVolumes(Part_1, [118105.9369682])
 Parameter_Epaisseur.setValue(34)
+model.do()
+model.testResultsVolumes(Part_1, [118190.673218984])
 model.end()
 
 assert(model.checkPythonDump())

diff --git a/test.models/sprocket.py b/test.models/sprocket.py
index 54c2d8442aa06328dbd4fce317e782b6aabea9f1..30c174ab240fe6f0dd557fa18ee16024ef5036bd 100644 (file)
--- a/test.models/sprocket.py
+++ b/test.models/sprocket.py
@@ -233,7 +233,6 @@ M_REF_DATA = [(1.5, 14094.989002197671652538701891899),
 for m in M_REF_DATA:
     Param_m.setValue(m[0])
     model.do()
-    model.generateTests(Boolean_1, "Boolean_1")
 
     model.testNbResults(Boolean_1, 1)
     model.testNbSubResults(Boolean_1, [0])

diff --git a/test.models/wheel_rim.py b/test.models/wheel_rim.py
index 9bc2cb9d11b7810a88bac558a19b5fc96ca3b37e..fc845501783283bba4deec0c000f9748b4531b42 100644 (file)
--- a/test.models/wheel_rim.py
+++ b/test.models/wheel_rim.py
@@ -264,6 +264,6 @@ model.testNbSubShapes(Boolean_1, GeomAPI_Shape.SOLID, [1])
 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.FACE, [35])
 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.EDGE, [162])
 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.VERTEX, [324])
-model.testResultsVolumes(Boolean_1, [2053931.913933836854994297027587891])
+model.testResultsVolumes(Boolean_1, [2053931.558882251149043440818786621])
 
 assert(model.checkPythonDump())