// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
//
using namespace std;
#include "MEDMEM_Mesh.hxx"
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+#
######################################################################
# #
# This Python script should be executed when the shared library is #
// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
//
using namespace std;
#include "MEDMEM_Mesh.hxx"
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+#
######################################################################
# #
# This Python script should be executed when the shared library is #
// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
-//
#include "MEDMEM_Exception.hxx"
#include "MEDMEM_define.hxx"
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+#
######################################################################
# #
# This Python script should be executed when the shared library is #
// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
-//
#include "MEDMEM_Exception.hxx"
#include "MEDMEM_define.hxx"
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+#
######################################################################
# #
# This Python script should be executed when the shared library is #
// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
-//
#include "MEDMEM_Exception.hxx"
#include "MEDMEM_define.hxx"
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+#
######################################################################
# #
# This Python script should be executed when the shared library is #
// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
-//
#include "MEDMEM_Exception.hxx"
#include "MEDMEM_define.hxx"
% | LE DOCUMENT |
% |___________________________________________________________________________|
%
-\title{User's Guide Of Med Memory}
-\author{Patrick Goldbronn \and Eric Fayolle \and Nadir Bouhamou \and Jerome Roy \and Nicolas Crouzet}
+\title{User's Guide Of Med Memory V 3.2}
+\author{Patrick Goldbronn \and Eric Fayolle \and Nadir Bouhamou \and Jerome Roy \and Nicolas Crouzet \and Vincent Bergeaud}
% ___________________________________________________________________________
% | |
%\newpage
\cleardoublepage
\tableofcontents
+
% ___________________________________________________________________________
% | |
-% | DEBUT DU TEXTE |
+% | DOCUMENT PRINCIPAL |
% |___________________________________________________________________________|
+%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\chapter{Introduction}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\section{Convention}
-
-\begin{itemize}
-
-\item Difference between local and global number~: when we talk about an
-element number, we could see $i^{th}$ quadrangle ($i^{th}$ in quadrangles
-array~: local numbering) or $j^{th}$ element ($j^{th}$ in all elements array~:
-global numbering). This two numbering are equivalent only if we have one
-geometric type ;
-
-\item All numbering begin at one (take care of array index !) ;
-\item When you get a C type array with a \texttt{get...} method, you must
-not replace some value of it. Access is in read only. Other use may
-product an impredicable result. To modify a such array use method
-\texttt{set...} ;
-\item Difference between local and global number~: when we talk about an
-element number, we could see \( i^{th} \) quadrangle (\( i^{th} \)
-in quadrangles array~: local numbering) or \( j^{th} \) element
-(\( j^{th} \) in all elements array~: global numbering). This two
-numbering are equivalent only if we have one geometric type.
-\item They are many methods that have two syntax (one singular and one
-plural). Plurals methods returns array and singulars methods returns one
-particular value in this array (see \method{getCoordinate} and
-\method{getCoordinates}).
-
-\end{itemize}
-
-\section{UML diagram}
-
-\includegraphics[width=16cm]{MEDMEM_UML.eps}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\chapter{How to use MED object}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\section{General Information}
-
-A typical use of this object is to mount in memory what is in a MED file (or
-any type of driver in red or read/write mode) and it will manage its memory on
-its own. Then from this object one can get some information such as~:
-
-\begin{itemize}
-\item the number of meshes stored in this object using the
-{\method{getNumberOfMeshes}}.
-\item the number of fields stored in this object using the
-{\method{getNumberOfFields}}.
-\item a list of mesh names using the {\method{getMeshNames}}.
-\item a list of field names using the {\method{getFieldNames}}.
-\item a list of MESH object using the {\method{getMesh}}
-\item a list of FIELD object using the {\method{getField}}
-\item a list of SUPPORT object on all type of entities (node, cell,
- face in 3d or edge on 2d) using the {\method{getSupport}}.
-\end{itemize}
-
-The destuctor of this object will destruct itself all FIELD, SUPPORT and MESH
-objects; via its get method you will have a pointeur on this object and you
-should never delete it.
-
-One can add as well some MESH or FIELD object via the {\method{addMesh}} and
-the {\method{addField}} respectively.
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\chapter{How to use MESH object}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-\section{General Information}
-
-We could get some general information about a MESH object such as~:
-
-\begin{itemize}
-\item name (\method{getName})
-\item a description (\method{getDescription})
-\item the space dimension (\method{getSpaceDimension})
-\item the mesh dimension (\method{getMeshDimension})
-\end{itemize}
-\fileCxx{MESHgeneral.cxx}
-
-\filePython{MESHgeneral.py}
-
-\section{Information about nodes}
-
-\begin{enumerate}
-\item I want to get the number of nodes~: Realy simple, use \method{getNumberOfNodes}.
-\item I want to get the coordinates components names~: use \method{getCoordinatesNames}
-which return a string array (one string for each space dimension)
-\item I want to get the coordinates components units~: use \method{getCoordinatesUnits}
-which return a string array (one string for each space dimension)
-\item I want to get the coordinates system~: use \method{getCoordinatesSystem}
-which return a string (\verb+"CARTESIAN"+, \verb+"CYLINDRICAL"+ or \verb+"SPHERICAL"+).
-\item I want to get the nodes coordinates~: use \method{getCoordinates}
-which return a pointer to the coordinates array where values are interlace
-or no. \textbf{Warning~:}
-
-\begin{itemize}
-\item When we get coordinates in \verb+MED_NO_INTERLACE+ mode, we get an
-array where values are ordered like (\verb+X1,X2,X..., Y1,Y..., Z1,Z...+).
-\item When we get coordinates in \verb+MED_FULL_INTERLACE+ mode, we get
-an array where values are ordered like (\verb+X1,Y1,Z1, X2,Y2,Z2, ...+).
-\end{itemize}
-\item I want to get one particular value of coordinate~: use \method{getCoordinate}
-which return the value of \( i^{th} \) node and \( j^{th} \) axis.
-\end{enumerate}
-\fileCxx{MESHcoordinates.cxx}
-
-\filePython{MESHcoordinates.py}
-
-\section{Information about cells}
-
-\begin{enumerate}
-\item I want to get the number of geometric type for a mesh entity~: use
-\method{getNumberOfTypes}
-
-
-\textbf{C++ Example~:}
-
-\verb+int NumberOfCellsTypes = myMesh.getNumberOfTypes(MED_CELL);+
-
-%%%%%%%%%%%%%%%%%
-\item I want to get all geometric type for a mesh entity~: use
-\method{getTypes} to get an array of \verb+medGeometryElement+
-(to use directly in others methods) or \method{getCellsTypes} to get
-an array of \verb+CELLMODEL+ (to ask mode information~: see \myref{CellModel}) .
-
-\textbf{C++ Example~:}
-
-\verb+const medGeometryElement * Types = myMesh.getTypes(MED_CELL);+
-
-\verb+const CELLMODEL * CellsTypes = myMesh.getCellsTypes(MED_CELL);+
-
-(each arrays are size \verb+NumberOfCellsTypes+)
-
-\item I want to get the number of cells~: use \method{getNumberOfElements}
-which return this information. You must give the mesh entity (\verb+MED_CELL+,
-\verb+MED_FACE+, \verb+MED_EDGE+ or \verb+MED_NODE+) and a geometric
-type of this entity.
-
-
-\textbf{C++ Example~:}
-
-\verb+int NumberOfTriangle = myMesh.getNumberOfElements(MED_FACE,MED_TRIA3);+
-
-\verb+int NumberOfFace = myMesh.getNumberOfElements(MED_FACE,MED_ALL_ELEMENT);+
-
-\item I want to get the geometric type of one element~: use \method{getElementType}
-which return a \verb+medGeometryElement+.
-
-
-\textbf{C++ Example~:}
-
-\verb+medGeometryElement myType = myMesh.getElementType(MED_FACE,10);+
-
-Return the \verb+medGeometryElement+ of \( 10^{th} \) face.
-
-\item I want to get a connectivity~: use \method{getConnectivity} which
-return an array with connectivity values.
-
-
-\label{getConnectivity}
-
-\textbf{C++ Example~:}
-
-\begin{verbatim}
-int NumberOfTetrahedron = myMesh.getNumberOfElements(MED_CELL,MED_TETRA4);
-const int * TetrahedronConnectivity =
- myMesh.getConnectivity(MED_FULL_ENTERLACE,
- MED_NODAL,
- MED_CELL,
- MED_TETRA4);
-\end{verbatim}
-\verb+TetrahedronConnectivity+ contain nodal connectivity
-of tetrahedron in mesh. It is arranged in full enterlace mode and
-its size is \verb+NumberOfTetrahedron x 4+.
-
-If you want to get connectivity of all elements (with \verb+Type=MED_ALL_ELEMENTS+),
-you must use the index array (return by \method{getConnectivityIndex})
-to get connectivity for each elements (see example \myref{MESHconnectivities.cxx}).
-
-\item I want to get an element number from a connectivity~: use \method{getElementNumber}
-which return the global number of a given connectivity.
-
-
-\textbf{C++ Example~:}
-\begin{verbatim}
-int * myElementConnectivity = {2,10,12,14};
-int myNumber = myMesh.getElementNumber(MED_NODAL,MED_CELL,
- myElementConnectivity);
-\end{verbatim}
-
-%%%%%%%%%%% WITH POLY METHODS %%%%%%%%%%%%
-
-\item The listed above methods do not take into account information about
- \verb+polygonal+ and \verb+polyhedral+ cells contained in a MESH object. To get
- full information about cell types, use the same methods with
- \verb+WithPoly+ postfix:
-\begin{itemize}
-\item use \method{getNumberOfTypesWithPoly} to get the number of
- geometric types for a mesh entity;
-\item use \method{getTypesWithPoly} to get all geometric types for a mesh entity;
-\item use \method{getNumberOfElementsWithPoly} to get the number of cells;
-\item use \method{getElementTypeWithPoly} to get the geometric type of
- one element.
-\end{itemize}
-There are separate methods to get number of polygons and polyhedrons:
-\method{getNumberOfPolygons} and \method{getNumberOfPolyhedron}
-
-To get connectivity of polygonal elements, use \method{getPolygonsConnectivity} along with
-\method{getPolygonsConnectivityIndex} (see example \myref{MESHconnectivities.cxx}).
-
-To get nodal connectivity of polyhedral elements, it is necessary use together
-3 methods: \method{getPolyhedronConnectivity}, \method{getPolyhedronFacesIndex}
-and \method{getPolyhedronIndex} (see example \myref{MESHconnectivities.cxx}).
-
-\end{enumerate}
-\fileCxx{MESHconnectivities.cxx}
-
-\filePython{MESHconnectivities.py}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\chapter{How to use MESHING object}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-This class is a derivated class of MESH class to build a MESH object from
-scratch (use of set methods).
-
-All verifications are under user responsability : If arrays values or arrays
-dimensions are wrongs, results are impredicable.
-
-All arrays in arguments in set methods are duplicated in MESHING object.
-
-\section{Build a MESHING}
-
-\label{BuildMeshing}
-
-\subsection{Coordinates}
-
-First we must defined points coordinates of the mesh. We use
-\method{setCoordinates}.
-
-\textbf{C++ Example~:}
-\begin{verbatim}
-MESHING myMeshing ;
-const int SpaceDimension=2;
-const int NumberOfNodes=6;
-int * Coordinates = new int[SpaceDimension*NumberOfNodes] ;
-string System="CARTESIAN";
-medModeSwitch MED_FULL_INTERLACE ;
-myMeshing.setCoordinates(SpaceDimension,NumberOfNodes,Coordinates,System,Mode);
-\end{verbatim}
-
-Then you could set the coordinates names and units (with
-\method{setCoordinatesNames} and \method{setCoordinatesUnits}).
-
-\subsection{Connectivities}
-
-When coordinates are defined, we could defined connectivities.
-
-First we must defined connectivity of MED\_CELL elements.
-After, we could defined constituent connectivity if necesary
-(MED\_FACE and/or MED\_EDGE).
-
-For each connectivities, you could use some methods in the following order :
-\begin{itemize}
-\item \method{setNumberOfTypes} to set the number of differents geometrics
-types (3 for example). This method allocates all arrays which size is this
-number ;
-\item \method{setTypes} to set the differents geometrics types
-({MED\_TETRA4,MED\_PYRA5,MED\_HEXA8} for example). Types should be given
-in increasing order of number of nodes for this type ;
-\item \method{setNumberOfElements} to set the number of elements for
-each geometric type. This method allocates connectivities array ;
-\item \method{setConnectivity} to set the connectivity in MED\_FULL\_INTERLACE
-mode for each geometric type (use \method{setPolygonsConnectivity} and
-\method{setPolyhedraConnectivity} for poly elements);
-\end{itemize}
-
-\textbf{C++ Example~:}
-\begin{verbatim}
-MESHING myMeshing ;
-myMeshing.setCoordinates(SpaceDimension,NumberOfNodes,Coordinates,System,Mode);
-
-myMeshing.setNumberOfTypes(2,MED_CELL);
-myMeshing.setTypes({MED_TRIA3,MED_QUAD4},MED_CELL);
-myMeshing.setNumberOfElements({3,2},MED_CELL); // 3 MED_TRIA3 and 2 MED_QUAD4
-myMeshing.setConnectivity({1,2,3,6,8,9,4,5,6},MED_CELL,MED_TRIA3);
-myMeshing.setConnectivity({1,3,4,5,4,5,7,8},MED_CELL,MED_QUAD4);
-\end{verbatim}
-
-
-\section{Defined a GROUP object}
-
-To add a group in a MESHING object, use \method{addGroup}.
-
-This method duplicate the GROUP object in the MESH object.
-
-To build this GROUP object, use SUPPORT methods \ref{CreateSupport} to set all attributes.
-
-\subsection{WARNING}
-
-For instance, translation from GROUP objects to FAMILY objects are not completed !
-
-You MUST set GROUP objects as if they are FAMILY objects.
-
-This feature will be fully implemented in next release of med memory.
-
-\section{Example}
-
-\fileCxx{MESHINGexample.cxx}
-
-%\filePython{MESHINGexample.py}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\chapter{How to use SUPPORT object}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\section{Create a SUPPORT object}
-
-\label{CreateSupport}
-
-To create a SUPPORT object, you must give :
-
-\begin{itemize}
-\item a reference to a MESH object
-\item its name
-\item on which mesh entity it apply to
-\end{itemize}
-\textbf{C++ example~:}
-
-\verb+SUPPORT mySupport(myMesh,"support on all faces",MED_FACE) ;+
-By default, this support is defined on all elements of the given entity.
-
-If you want a restricted SUPPORT, you must add manualy information
-about what do you want~:
-
-\begin{itemize}
-\item is not on all elements~: \verb+mySupport.setAll(false);+
-\item on how many geometric type~:\\
- \verb+mySupport.setNumberOfGeometricType(myNumberOfGeometricType);+
-\item on which geometric type~:\\
- \verb+mySupport.setGeometricType(myGeometricType);+
-\item Temporary : the Gauss point number for each geometric type~:\\
- \verb+mySupport.setNumberOfGaussPoint(myNumberOfGaussPoint);+
-\item the number of elements for each geometric type~:\\
- \verb+mySupport.setNumberOfEntities(myNumberOfEntities);+
-\item the total number of elements~:\\
- \verb+mySupport.setTotalNumberOfEntities(myTotalNumberOfEntities);+
-\item the array which contains elements for each geometric type~:\\
- \verb+mySupport.setNumber(myNumber);+
-\end{itemize}
-You could also use \method{setpartial} which set all you need.
-
-
-\section{Use a SUPPORT object}
-
-You could get all basic information (as you set them in \myref{CreateSupport})~:
-
-\begin{itemize}
-\item \verb+getName()+
-\item \verb+getDescription()+
-\item \verb+getMesh()+
-\item \verb+getEntity()+
-\item \verb+isOnAllElements()+
-\item \verb+getNumberOfTypes()+
-\item \verb+getTypes()+
-%\item \verb+getNumberOfGaussPoint()+
-%\item \verb+getNumberOfGaussPoint(myGeometricType)+
-\item \verb+getGeometricTypeNumber()+
-\item \verb+getNumberOfElements(myGeometricType)+
-\item \verb+getNumber(myGeometricType)+
-\item \verb+getNumberIndex()+
-\end{itemize}
-For details about this methods, see the reference manual \cite{RefManual}.
-
-The use of \method{getNumber} and \method{getNumberIndex} are the
-same as \method{getConnectivity} and \method{getConnectivityIndex}
-(see item \myref{getConnectivity}
-
-There is another particular method to blend another SUPPORT object
-into it.
-
-For example in C++ :
-\begin{verbatim}
-SUPPORT mySupport ;
-SUPPORT myOtherSupport ;
-...
-mySupport.blending(myOtherSupport) ;
-\end{verbatim}
-
-\verb+mySupport+ contain now all elements defined originally in it,
-more those defined in \verb+myOtherSupport+.
-
-
-\section{Case of FAMILY object}
-
-A FAMILY is a SUPPORT with some additionnal methods that concern some optional attribut (we could have none) and group (we could also have none) :
-\begin{itemize}
-\item \method{getIdentifier} return the family identifier (an integer)
-
-\item \method{getNumberOfAttributes} return the number of attributes of this family
-\item \method{getAttributesIdentifiers} and \method{getAttributeIdentifier} return an integer array or an integer that represent attribut identifier.
-\item \method{getAttributesValues} and \method{getAttributeValue} return an integer array or an integer that represent attribut value.
-\item \method{getAttributesDescriptions} and \method{getAttributeDescription} return a string array or a string that represent attribut description.
-
-\item \method{getNumberOfGroups} return the number of groups which it belog to.
-\item \method{getGroupsNames} and \method{getGroupName} return a string array or a string that represent the group name which it belog to.
-
-\end{itemize}
-
-\section{Case of GROUP object}
-
-A GROUP is a SUPPORT with some additionnal methods to find FAMILY that make up it :
-\begin{itemize}
-\item \method{getNumberOfFamilies} return the number of FAMILY that make up the GROUP ;
-\item \method{getFamilies} and \method{getFamily} return a FAMILY array or a FAMILY that make up the GROUP.
-\end{itemize}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\chapter{How to use Field}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\section{Introduction}
-
-A field is characterized by its name (\method{getName}) and an optional description (\method{getDescription}).
-
-It is also characterized by this calculating moment :
-\begin{itemize}
-\item an iteration number (time step number)
-\item an order number (use if there are internal iteration in a time step)
-\item the time that correspond to this iteration number.
-\end{itemize}
-
-By default, there are no iteration and order number defined (value
-MED\_NOPDT and MED\_NONOR).
-
-A field contain values which apply on some nodes or elements (cell, face or edge).
-
-We find these informations from a SUPPORT object (see \method{getSupport}).
-
-Each field have a number of components (\method getNumberOfComponents) and all these components have a name (\method{getComponentsNames} and \method{getComponentName}), a description (\method{getComponentsDescriptions} and \method{getComponentDescription}) and an unit (\method{getMEDComponentsUnits} and \method{getMEDComponentUnit}).
-
-For unit you could use later UNIT (\myref{Unit}) objet to make a more general control on it. But the use of this class must be specified.
-
-To get values of a FIELD, you could use \method{getValue}, \method{getValueI}
-and \method{getValueIJ}~:
-
-\begin{itemize}
-\item First return a reference to all values in the given mode (full or no
-interlace).
-\item Second return a reference to $i^{th}$ element values or component values (in accordance with the given mode).
-\item Third return the $j^{th}$ component of $i^{th}$ element.
-\end{itemize}
-
-\fileCxx{FIELDgeneral.cxx}
-
-\filePython{FIELDgeneral.py}
-
-\section{Create a Field}
-
-It is simple to create a field object. You must know its SUPPORT and the number of components.
-
-\textbf{Example :}
-\verb+FILED<double> myField(mySupport,NumberOfComponents) ;+
-
-You must now set a name (\method{setName}) and optionaly a description
-(\method{setDescription}).
-
-By default there are no iteration and order number (negative values) and
-time is null. You could change this by using \method{setIterationNumber},
-\method{setOrderNumber} and \method{setTime}.
-
-You \textbf{SHOULD} also set unit of your components with \method{setMEDComponentUnit}
-
-To set value, use \method{setValueIJ} to put new value of field.
-
-\fileCxx{FIELDcreate.cxx}
-
-\filePython{FIELDcreate.py}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\chapter{Other Classes}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-\section{class CELLMODEL}
-\label{CellModel}
-
-To do
-
-\section{class UNIT}
-\label{Unit}
-
-To do
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\chapter{Using drivers}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-The generic driver mecanism gives users the possibility to write/read
-the content of an object according to a specified file format. The
-semantic remains the same whatever the object is (MESH, FIELD, MED).
-By the way it allows using several file formats for writting an object.
-
-
-\section{Invoking a driver}
-
-
-\subsection{Invoking a driver at creation object time}
-
-This is the simplest way of invoking a driver. The driver parameters
-are given to the constructor of the object. Except for the MED object,
-this way of invoking a driver assume you know exactly the name of
-the MESH/FIELD you want read from a file <fileName> of type <driverType>.
-
-ex 1.1 : For a FIELD object, invoking FIELD<double> myField(MED\_DRIVER,fileName,fieldName)
-create a FIELD object and a driver which loads the mesh <fieldName>
-from the MED file <fileName> (Not implemented yet !).
-
-ex 1.2 : To remove the default driver previously created myField->rmDriver();
-
-ex 2 : For a MESH object, invoking MESH myMesh(MED\_DRIVER,fileName,meshName)
-create a MESH object and a driver which loads the mesh <meshName>
-from the MED file <fileName>.
-
-ex 3 : For a MED object, invoking MED myMed(MED\_DRIVER,fileName)
-create a MED object to explore the MED file <fileName>.
-
-rem 1 : ex1 is equivalent to \ref{sec:invoking_a_driver_from_the_std_drv_method}
-ex1.
-
-rem 2 : Since the driver has read the object, the associated file
-is closed. You can reread the object with the default driver by calling
-the read() method : myObject.read().
-
-\fileCxx{MEDMEM_InvokingDriverAtObjectCreationTime.cxx}
-
-\filePython{MEDMEM_InvokingDriverAtObjectCreationTime.py}
-
-\subsection{Invoking a driver from the standard driver method of an object\label{sec:invoking_a_driver_from_the_std_drv_method}}
-
-This way of invoking a driver give the possiblility to add several
-drivers to an exiting object.
-
-ex1 : First we create a FIELD without any driver FIELD<double>~{*}~myField1~=~new~FIELD<double>;
-then we add a driver with int myDriver1 = myField1->addDriver(driverType1,
-fileName1, fieldName1); for reading <fieldName1> from file <fileName1>
-with myField1->read(myDriver1);
-
-ex2 : We add a new driver of type <driverType2> int myDriver2 = myField1->addDriver(driverType2,
-fileName2,fieldName2); in order to write myField1 in file <fileName2>
-with <fieldName2> name using command myField1->write(myDriver2);
-
-rem 1 : Files are openned then closed each time you call read() or
-write() methods.
-
-rem 2 : If you use more than a driver you need to keep the driver
-handlers (myDriverI ).
-
-\fileCxx{MEDMEM_InvokingDriverFromStandardObjectMethod.cxx}
-
-\filePython{MEDMEM_InvokingDriverFromStandardObjectMethod.py}
-
-\subsection{Invoking a driver and attaching it to an existing object}
-
-The methods exposed in the two previous sections always create drivers
-in read/write access mode. Another way of creating a driver is to
-create a driver with a specific access mode.
-
-ex1 : First we create a FIELD without any driver FIELD<double>~{*}~myField1~=~new
-FIELD<double>(); then we create a read-only driver MED\_FIELD\_RDONLY\_DRIVER<double>~myRdOnlyDriver(fileName1,myField1);
-and attached it to myField1. Finally you must set the fieldName1 you
-want to acess in fileName1 with myRdOnlyDriver->setFieldName(fieldName1);
-in order to read the field with myRdOnlyDriver->open(); myRdOnlyDriver->read();
-
-Don't forget to close the file with myRdOnlyDriver->close().
-
-ToDo : By now when you create such specific drivers, the object doesn't
-know anything about it.
-
-\fileCxx{MEDMEM_InvokingDriverByAttachingItToAnObject.cxx}
-
-\filePython{MEDMEM_InvokingDriverByAttachingItToAnObject.py}
-
-\section{Using the MED driver}
-
-The MED object provides the ability of :
-
-\begin{enumerate}
-\item \noindent Obtainning a reference on the whole structure contained
-in a file.
-\item Obtainning the list of all the Meshes/Fields names contained in a
-file.
-\item Obtainning a Mesh/Field reference using a name.
-\item Writting a whole set of independent objects with a simple command.
-\end{enumerate}
-
-\subsection{Exploring files}
-
-In this first use case the user wants to explore the meshes \& fields
-containned within a file <filename> of type given by the <drivertype>
-parameter.
-
-ex 1 : Calling MED {*} myMed = new MED(driverType1, fileName1); create
-a MED object which open fileName1, read all MESHes/FIELDs relations
-then close the file.
-
-This is equivalent to MED~{*}~myMed~=~new~MED(); myDriver~=~myMed->addDriver(driverType1,fileName1);
-myMed->readFileStruct(myDriver);
-
-ex 2 : To get the list of meshNames from a MED object, first ask the
-object how many meshes it had by calling int numberOfMeshes~=~myMed->getNumberOfMeshes();
-then get the list with myMeshNames~=~new string{[}getMeshNames{]};
-myMed->getMeshNames(myMeshNames).
-
-Note you can also use the deque<string> getMeshNames() method.
-
-ex 3 : To get a list of fieldNames from a MED object, first ask the
-object how many fields it had by calling int numberOfFields~=~myMed->getNumberOfFields();
-then get the list with myFieldNames~=~new string{[}getFieldNames{]};
-myMed->getFieldNames(myFieldNames).
-
-ex 4 :To get a particular MESH use MESH {*} myMesh1 = myMED->getMesh(myMeshNames{[}0{]})
-
-ex 5 :To get a particular FIELD you first need to know what (time
-step, iteration number) list is used by calling deque<DT\_IT\_>~myField1DtIt~=~myMed->getFieldIteration(FieldName{[}0{]})
-; then you can ask for getting a specific FIELD with FIELD~{*}~myField1~=~myMED->getField(myFieldNames{[}0{]},myField1DtIt{[}0{]}.dt,myField1DtIt{[}0{]}.it).
-
-ex2 : To write the whole content of a MED object first add a driver
-myDriver2~=~myMed.addDriver(driverType2,~fileName2); then ask for
-writing the object myMed->write(myDriver2); (not implemented yet !)
-
-You can remove the driver with myMed->rmDriver(myDriver2);
-
-rem 1 : It is possible to use multiple drivers to read a set of FIELDs
-/ MESHes from various file formats and writing the whole set through
-a specific write.(not implemented yet !)
-
-
-\subsubsection{Adding existing MESHes/FIELDs objects}
-
-Not yet implemented.
-
-\section{Using the VTK driver}
-
-This driver allow to save all MESH and FIELD objects in an ASCII file in
-VTK format \cite{vtk}.
-
-You could use this driver only from a MED object, because VTK file format
-impose to write objects in particular order.
-
-\textbf{C++ Example~:}
-\begin{verbatim}
-MED myMed(MED_DRIVER,"file.med");
-myMed.read();
-int id = myMed.addDriver(VTK_DRIVER,"file.vtk");
-myMed.write(id) ;
-\end{verbatim}
-
-\section{Using the GIBI driver}
-
-This driver allow to load a mesh from a GIBI file (ASCII file with the extension '.sauve'), puting the mesh into a MESH object of MED. It's a read only driver and is applicable only to a MESH object.
-
-\textbf{C++ Example~:}
-\begin{verbatim}
-MESH * myMesh= new MESH() ;
-GIBI_MESH_RDONLY_DRIVER myGibiMeshDriver("file.sauve", myMesh) ;
-myGibiMeshDriver.open() ;
-myGibiMeshDriver.read() ;
-myGibiMeshDriver.close() ;
-\end{verbatim}
-
+\input{MEDMEM_Content.tex}
+%
% ___________________________________________________________________________
% | |
% | REFERENCES |
% |___________________________________________________________________________|
-%
+
\newpage
%\thebibliography{biblio}
\begin{thebibliography}{1}
\addcontentsline{toc}{chapter}{Bibliography}
-\bibitem{RefManual} Reference Manual~: \verb+http://www-drn2.cea.fr/MED/MEDMEM/DOC/html/index.html+
+\bibitem{RefManualMedFile}
+\newblock {Reference Manual for Med File~:} \\
+{\sc V. Lefebvre \and E. Fayolle} \\
+\newblock {Projet PAL: Définition du modèle d'échange de données MED V2.2}
+\newblock {\it Note technique EDF/SINETICS}
+\newblock {HI-26-03-012/A} \\
+\newblock {\verb+http://www-drn2.cea.fr/MED/MEDMEM/DOC/html/index.html+}
+
+\bibitem{RefManualMedMemory}
+\newblock {Med Memory Users Reference Manual~:} \\
+\newblock {\verb+file:://$MED_ROOT_DIR/share/salome/doc/html_ref_user/index.html+} \\
+\newblock {\verb+$MED_ROOT_DIR/share/salome/doc/MedMemory_user_2on1.pdf+}
+
-\bibitem{vtk} VTK home page~: \verb+http://public.kitware.com/VTK+
+\bibitem{vtk}
+\newblock {VTK home page~: \verb+http://public.kitware.com/VTK+}
\end{thebibliography}
// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
-//
#include "MEDMEM_Meshing.hxx"
#include "MEDMEM_Group.hxx"
// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
-//
#include "MEDMEM_Mesh.hxx"
-#include "MEDMEM_CellModel.hxx"
using namespace MEDMEM ;
using namespace MED_EN ;
// we get all type for cell entity :
int NumberOfTypes = myMesh.getNumberOfTypes(MED_CELL) ;
- const CELLMODEL * Types = myMesh.getCellsTypes(MED_CELL) ;
-
cout << "Show Connectivity (Nodal) :" << endl ;
- // this example use access with a specified medGeometryElement through
- // CELLMODEL class
+ // this example use access with a specified medGeometryElement array
+ const medGeometryElement * Types = myMesh.getTypes(MED_CELL);
+ string * cellTypeNames = myMesh.getCellTypeNames(MED_CELL);
for (int i=0; i<NumberOfTypes; i++) {
- cout << "For type " << Types[i].getName() << " : " << endl ;
- medGeometryElement myType = Types[i].getType() ;
+ cout << "For type " << cellTypeNames[i] << " : " << endl ;
+ medGeometryElement myType = Types[i] ;
int NumberOfElements = myMesh.getNumberOfElements(MED_CELL,myType);
- int NomberOfNodesPerCell = Types[i].getNumberOfNodes() ;
+ int NomberOfNodesPerCell = Types[i]%100 ;
const int * Connectivity =
myMesh.getConnectivity(MED_FULL_INTERLACE,
MED_NODAL,
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+#
from libMEDMEM_Swig import *
MedFile = "pointe.med"
// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
-//
#include "MEDMEM_Mesh.hxx"
using namespace MEDMEM ;
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+#
from libMEDMEM_Swig import *
MedFile = "pointe.med"
// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/
-//
using namespace std;
#include "MEDMEM_Mesh.hxx"
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+#
from libMEDMEM_Swig import *
MedFile = "pointe.med"
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
# -* Makefile *-
#
# Author : Nadir BOUHAMOU (CEA)
# Executables targets
BIN = MESHgeneral MESHcoordinates MESHconnectivities MESHINGexample FIELDcreate FIELDgeneral MEDMEM_InvokingDriverByAttachingItToAnObject MEDMEM_InvokingDriverFromStandardObjectMethod MEDMEM_InvokingDriverAtObjectCreationTime
-CPPFLAGS+=$(MED2_INCLUDES) $(HDF5_INCLUDES) -I${KERNEL_ROOT_DIR}/include/salome
+LDFLAGS+= -L$(top_builddir)/lib@LIB_LOCATION_SUFFIX@/salome
+LDFLAGSFORBIN+= -L$(top_builddir)/lib@LIB_LOCATION_SUFFIX@/salome
-CXXFLAGS+=-ftemplate-depth-42 -I${KERNEL_ROOT_DIR}/include/salome
+CPPFLAGS+=$(MED2_INCLUDES) $(HDF5_INCLUDES)
+CXXFLAGS+=@CXXTMPDPTHFLAGS@
+#LDFLAGS+=$(MED2_LIBS) $(HDF5_LIBS)
# change motivated by the bug KERNEL4778.
-#LDFLAGS+=$(MED2_LIBS) $(HDF5_LIBS) -lSalomeLoggerServer -L${KERNEL_ROOT_DIR}/lib/salome
-LDFLAGS+=$(MED2_LIBS) $(HDF5_LIBS) -L${KERNEL_ROOT_DIR}/lib/salome
+LDFLAGS+=$(MED2_LIBS) $(HDF5_LIBS) -lmedmem -lmed_V2_1 $(STDLIB)
-#LDFLAGSFORBIN+=$(MED2_LIBS) $(HDF5_LIBS) -lSalomeLoggerServer -L${KERNEL_ROOT_DIR}/lib/salome -lmedmem
-LDFLAGSFORBIN+=$(MED2_LIBS) $(HDF5_LIBS) -lSALOMELocalTrace -L${KERNEL_ROOT_DIR}/lib/salome -lmedmem
+#LDFLAGSFORBIN+=$(MED2_LIBS) $(HDF5_LIBS)
+# change motivated by the bug KERNEL4778.
+LDFLAGSFORBIN+=-lm $(MED2_LIBS) $(HDF5_LIBS) -lmedmem -lmed_V2_1
-LIBSFORBIN=
+ifeq ($(MED_WITH_KERNEL),yes)
+ CPPFLAGS+= ${KERNEL_CXXFLAGS}
+ CXXFLAGS+= ${KERNEL_CXXFLAGS}
+ LDFLAGS+= ${KERNEL_LDFLAGS} -lSALOMELocalTrace
+ LDFLAGSFORBIN+= ${KERNEL_LDFLAGS} -lSALOMELocalTrace -lSALOMEBasics
+endif
-LDFLAGS=
+LIBSFORBIN=
LIBS=
# User Guide
-MEDMEM_UsersGuide.ps: MEDMEM_UsersGuide.dvi
- dvips -o MEDMEM_UsersGuide.ps MEDMEM_UsersGuide.dvi
-
-MEDMEM_UsersGuide.pdf: MEDMEM_UsersGuide.ps
- ps2pdf MEDMEM_UsersGuide.ps MEDMEM_UsersGuide.pdf
+MEDMEM_UsersGuide.ps: MEDMEM_UsersGuide.pdf
+ pdf2ps MEDMEM_UsersGuide.pdf MEDMEM_UsersGuide.ps
MEDMEM_UsersGuide_2on1.ps: MEDMEM_UsersGuide.ps
psnup -2 MEDMEM_UsersGuide.ps >MEDMEM_UsersGuide_2on1.ps
MEDMEM_UsersGuide_2on1.pdf: MEDMEM_UsersGuide_2on1.ps
ps2pdf MEDMEM_UsersGuide_2on1.ps MEDMEM_UsersGuide_2on1.pdf
-
-MEDMEM_UML.eps:MEDMEM_UML.dia
- dia -e $@ $<
-
-MEDMEM_UsersGuide.dvi: MEDMEM_UsersGuide.tex MEDMEM_UML.eps
- echo "Running latex..."
- latex $<
+MEDMEM_UsersGuide.pdf: MEDMEM_UsersGuide.tex MEDMEM_Content.tex MEDMEM_UML_light.png MEDMEM_UML.png FIELDcreate.cxx FIELDgeneral.cxx MEDMEM_InvokingDriverAtObjectCreationTime.cxx MEDMEM_InvokingDriverByAttachingItToAnObject.cxx MEDMEM_InvokingDriverFromStandardObjectMethod.cxx MEDMEM_MedAddingAnExistingObject.cxx MESHconnectivities.cxx MESHcoordinates.cxx MESHgeneral.cxx MESHINGexample.cxx FIELDcreate.py FIELDgeneral.py MEDMEM_InvokingDriverAtObjectCreationTime.py MEDMEM_InvokingDriverByAttachingItToAnObject.py MEDMEM_InvokingDriverFromStandardObjectMethod.py MESHconnectivities.py MESHcoordinates.py MESHgeneral.py MESHINGexample.py
+ echo "Running pdflatex..."
+ pdflatex $<
#echo "Running makeindex..."
#makeindex MEDMEM_UsersGuide.idx
echo "Rerunning latex...."
- latex $<
+ pdflatex $<
latex_count=5
while egrep -s 'Rerun (LaTeX|to get cross-references right)' MEDMEM_UsersGuide.log && [ $latex_count -gt 0 ] ;\
do \
MEDMEM_UsersGuide.tex:MEDMEM_UsersGuide.tex.in
cd $(top_builddir) && CONFIG_FILES=./doc/MEDMEM/MEDMEM_UsersGuide.tex ./config.status
+MEDMEM_Content.tex:MEDMEM_Content.tex.in
+ cd $(top_builddir) && CONFIG_FILES=./doc/MEDMEM/MEDMEM_Content.tex ./config.status
+
+MEDMEM_UML_light.png:MEDMEM_UML_light.png.in
+ cd $(top_builddir) && CONFIG_FILES=./doc/MEDMEM/MEDMEM_UML_light.png ./config.status
+
+MEDMEM_UML.png:MEDMEM_UML.png.in
+ cd $(top_builddir) && CONFIG_FILES=./doc/MEDMEM/MEDMEM_UML.png ./config.status
+
# install procedure
install: $(datadir)/doc ps_2on1 pdf_2on1
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
# -* Makefile *-
#
@COMMENCE@
-docs:
+dev_docs:
@@SETX@; for d in $(SUBDIRS); do \
(cd $$d && $(MAKE) $@) || exit 1; \
done
+++ /dev/null
-# Doxyfile 1.3-rc1
-
-#---------------------------------------------------------------------------
-# General configuration options
-#---------------------------------------------------------------------------
-PROJECT_NAME = "SALOME - MED - v.2.0.0"
-PROJECT_NUMBER = id#1.1
-OUTPUT_DIRECTORY = ../
-OUTPUT_LANGUAGE = English
-EXTRACT_ALL = YES
-EXTRACT_PRIVATE = YES
-EXTRACT_STATIC = YES
-EXTRACT_LOCAL_CLASSES = YES
-HIDE_UNDOC_MEMBERS = NO
-HIDE_UNDOC_CLASSES = NO
-HIDE_FRIEND_COMPOUNDS = NO
-HIDE_IN_BODY_DOCS = NO
-BRIEF_MEMBER_DESC = YES
-REPEAT_BRIEF = NO
-ALWAYS_DETAILED_SEC = YES
-INLINE_INHERITED_MEMB = YES
-FULL_PATH_NAMES = NO
-STRIP_FROM_PATH =
-INTERNAL_DOCS = YES
-CASE_SENSE_NAMES = YES
-SHORT_NAMES = NO
-HIDE_SCOPE_NAMES = NO
-VERBATIM_HEADERS = YES
-SHOW_INCLUDE_FILES = YES
-JAVADOC_AUTOBRIEF = YES
-MULTILINE_CPP_IS_BRIEF = NO
-DETAILS_AT_TOP = NO
-INHERIT_DOCS = YES
-INLINE_INFO = YES
-SORT_MEMBER_DOCS = NO
-DISTRIBUTE_GROUP_DOC = NO
-TAB_SIZE = 5
-GENERATE_TODOLIST = YES
-GENERATE_TESTLIST = YES
-GENERATE_BUGLIST = YES
-GENERATE_DEPRECATEDLIST= YES
-ALIASES =
-ENABLED_SECTIONS =
-MAX_INITIALIZER_LINES = 25
-OPTIMIZE_OUTPUT_FOR_C = YES
-OPTIMIZE_OUTPUT_JAVA = YES
-SHOW_USED_FILES = NO
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-QUIET = NO
-WARNINGS = YES
-WARN_IF_UNDOCUMENTED = YES
-WARN_FORMAT = "$file:$line: $text"
-WARN_LOGFILE = log.txt
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-INPUT = ../../../share/salome/idl/MED.idl \
- ../../../share/salome/idl/MED_Gen.idl
-FILE_PATTERNS =
-RECURSIVE = NO
-EXCLUDE =
-EXCLUDE_SYMLINKS = NO
-EXCLUDE_PATTERNS =
-EXAMPLE_PATH =
-EXAMPLE_PATTERNS =
-EXAMPLE_RECURSIVE = NO
-IMAGE_PATH = sources/
-INPUT_FILTER =
-FILTER_SOURCE_FILES = YES
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-SOURCE_BROWSER = NO
-INLINE_SOURCES = NO
-STRIP_CODE_COMMENTS = YES
-REFERENCED_BY_RELATION = NO
-REFERENCES_RELATION = YES
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-ALPHABETICAL_INDEX = NO
-COLS_IN_ALPHA_INDEX = 5
-IGNORE_PREFIX =
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-GENERATE_HTML = YES
-HTML_OUTPUT = html
-HTML_FILE_EXTENSION = .html
-HTML_HEADER = sources/myheader.html
-HTML_FOOTER =
-HTML_STYLESHEET =
-HTML_ALIGN_MEMBERS = YES
-GENERATE_HTMLHELP = NO
-CHM_FILE =
-HHC_LOCATION =
-GENERATE_CHI = NO
-BINARY_TOC = YES
-TOC_EXPAND = YES
-DISABLE_INDEX = YES
-ENUM_VALUES_PER_LINE = 4
-GENERATE_TREEVIEW = YES
-TREEVIEW_WIDTH = 250
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-GENERATE_LATEX = NO
-LATEX_OUTPUT = latex
-LATEX_CMD_NAME = latex
-MAKEINDEX_CMD_NAME = makeindex
-COMPACT_LATEX = NO
-PAPER_TYPE = a4wide
-EXTRA_PACKAGES =
-LATEX_HEADER =
-PDF_HYPERLINKS = NO
-USE_PDFLATEX = NO
-LATEX_BATCHMODE = NO
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-GENERATE_RTF = NO
-RTF_OUTPUT = rtf
-COMPACT_RTF = NO
-RTF_HYPERLINKS = NO
-RTF_STYLESHEET_FILE =
-RTF_EXTENSIONS_FILE =
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-GENERATE_MAN = NO
-MAN_OUTPUT = man
-MAN_EXTENSION = .3
-MAN_LINKS = NO
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-GENERATE_XML = NO
-XML_SCHEMA =
-XML_DTD =
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-GENERATE_AUTOGEN_DEF = NO
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-GENERATE_PERLMOD = NO
-PERLMOD_LATEX = NO
-PERLMOD_PRETTY = YES
-PERLMOD_MAKEVAR_PREFIX =
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-ENABLE_PREPROCESSING = YES
-MACRO_EXPANSION = YES
-EXPAND_ONLY_PREDEF = NO
-SEARCH_INCLUDES = YES
-INCLUDE_PATH =
-INCLUDE_FILE_PATTERNS =
-PREDEFINED =
-EXPAND_AS_DEFINED =
-SKIP_FUNCTION_MACROS = NO
-#---------------------------------------------------------------------------
-# Configuration::addtions related to external references
-#---------------------------------------------------------------------------
-TAGFILES =
-GENERATE_TAGFILE =
-ALLEXTERNALS = NO
-EXTERNAL_GROUPS = YES
-PERL_PATH = /usr/bin/perl
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-CLASS_DIAGRAMS = YES
-HIDE_UNDOC_RELATIONS = NO
-HAVE_DOT = YES
-CLASS_GRAPH = YES
-COLLABORATION_GRAPH = NO
-TEMPLATE_RELATIONS = YES
-INCLUDE_GRAPH = YES
-INCLUDED_BY_GRAPH = NO
-GRAPHICAL_HIERARCHY = YES
-DOT_IMAGE_FORMAT = jpg
-DOT_PATH =
-DOTFILE_DIRS =
-MAX_DOT_GRAPH_WIDTH = 1024
-MAX_DOT_GRAPH_HEIGHT = 1200
-GENERATE_LEGEND = NO
-DOT_CLEANUP = YES
-#---------------------------------------------------------------------------
-# Configuration::addtions related to the search engine
-#---------------------------------------------------------------------------
-SEARCHENGINE = NO
-CGI_NAME = search.cgi
-CGI_URL =
-DOC_URL =
-DOC_ABSPATH =
-BIN_ABSPATH = /usr/local/bin/
-EXT_DOC_PATHS =
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
# -* Makefile *-
#
# Author : Vasily Rusyaev (Open Cascade NN)
+++ /dev/null
-<!DOCTYPE doctype PUBLIC "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-
- <meta http-equiv="Content-Type"
- content="text/html; charset=iso-8859-1">
-
- <meta name="GENERATOR"
- content="Mozilla/4.73 [en] (WinNT; I) [Netscape]">
- <title>Med Module Documentation</title>
-</head>
- <body bgcolor="#cccccc" text="#000000" link="#0000ee" alink="#0000ee"
- vlink="#551a8b">
-
-<div align="center">
-<center>
-<center>
- </center>
-
-<table width="96%" align="center">
- <tbody>
- <tr>
- <td><a href="http://www.opencascade.com"><img
- src="tui/MED/sources/logocorp.gif" border="0" height="46" width="122">
- </a></td>
- <td>
-
- <div align="right"><a href="http://www.opencascade.org/SALOME/"><img
- src="tui/MED/sources/application.gif" border="0" height="46"
- width="108">
- </a></div>
- </td>
- </tr>
-
- </tbody>
-</table>
-
-<div align="center">
-<center>
-<hr width="100%" size="2">
-<h1>Med MODULE Documentation</h1>
- </center>
- </div>
-
-<table width="96%">
- <tbody>
-
- </tbody>
-</table>
- </center>
-
-<div align="center">
-<p> <img src="tui/MED/sources/Application-About.png"
- alt="Application-About.png" width="30%" height="20%">
- </p>
- </div>
-
-<center>
-<table width="96%">
- <tbody>
-
- </tbody>
-</table>
- <br>
- </center>
-
-<address> </address>
- <br>
-
-<address> </address>
-
-<center></center>
-
-<center><br>
- </center>
-
-<address> </address>
-
-<center><big><a href="tui/MED/index.html">TUI Documentation</a></big></center>
-
-<address> </address>
-
-<center></center>
-
-<center><br>
- <br>
- </center>
- </div>
- <br>
- <br>
- <br>
- <br>
-</body>
-</html>
+# Copyright (C) 2005 OPEN CASCADE, CEA, EDF R&D, LEG
+# PRINCIPIA R&D, EADS CCR, Lip6, BV, CEDRAT
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
# -* Makefile *-
#
@COMMENCE@
-docs:
+dev_docs:
@@SETX@; for d in $(SUBDIRS); do \
(cd $$d && $(MAKE) $@) || exit 1; \
done; \
- cp -f $(srcdir)/MED_index_v3.1.0.html MED_index_v3.1.0.html
clean:
@@SETX@; for d in $(SUBDIRS); do \
- (cd $$d && $(MAKE) $@) || exit 1; \
+ if test -d $$d/MED; then \
+ (cd $$d && $(MAKE) $@) || exit 1; \
+ fi; \
done
distclean: clean
@@SETX@; for d in $(SUBDIRS); do \
- (cd $$d && $(MAKE) $@) || exit 1; \
+ if test -d $$d/MED; then \
+ (cd $$d && $(MAKE) $@) || exit 1; \
+ fi; \
done
install:
- $(MAKE) docs
- (cd tui && $(MAKE) install);
- cp -f MED_index_v3.1.0.html $(docdir)
+ @@SETX@; for d in $(SUBDIRS); do \
+ if test -d $$d/MED; then \
+ (cd $$d && $(MAKE) $@); \
+ fi; \
+ done
uninstall:
@@SETX@; for d in $(SUBDIRS); do \
- (cd $$d && $(MAKE) $@) || exit 1; \
+ if test -d $$d/MED; then \
+ (cd $$d && $(MAKE) $@) || exit 1; \
+ fi; \
done; \
- rm -fr $(docdir)/MED_index_v3.1.0.html
+++ /dev/null
-# Doxyfile 1.3.7
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-PROJECT_NAME = "SALOME - MED - v.3.2.0a1"
-PROJECT_NUMBER = id#1.1
-OUTPUT_DIRECTORY = ../
-CREATE_SUBDIRS = NO
-OUTPUT_LANGUAGE = English
-USE_WINDOWS_ENCODING = NO
-BRIEF_MEMBER_DESC = YES
-REPEAT_BRIEF = YES
-ABBREVIATE_BRIEF =
-ALWAYS_DETAILED_SEC = NO
-INLINE_INHERITED_MEMB = NO
-FULL_PATH_NAMES = NO
-STRIP_FROM_PATH =
-STRIP_FROM_INC_PATH =
-SHORT_NAMES = NO
-JAVADOC_AUTOBRIEF = YES
-MULTILINE_CPP_IS_BRIEF = NO
-DETAILS_AT_TOP = NO
-INHERIT_DOCS = NO
-DISTRIBUTE_GROUP_DOC = NO
-TAB_SIZE = 5
-ALIASES =
-OPTIMIZE_OUTPUT_FOR_C = YES
-OPTIMIZE_OUTPUT_JAVA = YES
-SUBGROUPING = YES
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-EXTRACT_ALL = YES
-EXTRACT_PRIVATE = YES
-EXTRACT_STATIC = YES
-EXTRACT_LOCAL_CLASSES = YES
-EXTRACT_LOCAL_METHODS = NO
-HIDE_UNDOC_MEMBERS = YES
-HIDE_UNDOC_CLASSES = YES
-HIDE_FRIEND_COMPOUNDS = NO
-HIDE_IN_BODY_DOCS = NO
-INTERNAL_DOCS = YES
-CASE_SENSE_NAMES = YES
-HIDE_SCOPE_NAMES = NO
-SHOW_INCLUDE_FILES = YES
-INLINE_INFO = YES
-SORT_MEMBER_DOCS = NO
-SORT_BRIEF_DOCS = NO
-SORT_BY_SCOPE_NAME = NO
-GENERATE_TODOLIST = YES
-GENERATE_TESTLIST = YES
-GENERATE_BUGLIST = YES
-GENERATE_DEPRECATEDLIST= YES
-ENABLED_SECTIONS =
-MAX_INITIALIZER_LINES = 25
-SHOW_USED_FILES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-QUIET = NO
-WARNINGS = YES
-WARN_IF_UNDOCUMENTED = YES
-WARN_IF_DOC_ERROR = YES
-WARN_FORMAT = "$file:$line: $text"
-WARN_LOGFILE = log.txt
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-INPUT = ../../../share/salome/src \
- ../../../share/salome/idl
-FILE_PATTERNS = *.idl *.h *.hh *.hxx *.c *.cc *.cxx *.ixx *.jxx
-RECURSIVE = YES
-EXCLUDE =
-EXCLUDE_SYMLINKS = NO
-EXCLUDE_PATTERNS =
-EXAMPLE_PATH =
-EXAMPLE_PATTERNS =
-EXAMPLE_RECURSIVE = YES
-IMAGE_PATH = sources/
-INPUT_FILTER =
-FILTER_SOURCE_FILES = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-SOURCE_BROWSER = NO
-INLINE_SOURCES = NO
-STRIP_CODE_COMMENTS = YES
-REFERENCED_BY_RELATION = NO
-REFERENCES_RELATION = YES
-VERBATIM_HEADERS = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-ALPHABETICAL_INDEX = NO
-COLS_IN_ALPHA_INDEX = 5
-IGNORE_PREFIX =
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-GENERATE_HTML = YES
-HTML_OUTPUT = MED
-HTML_FILE_EXTENSION = .html
-HTML_HEADER = sources/myheader.html
-HTML_FOOTER =
-HTML_STYLESHEET =
-HTML_ALIGN_MEMBERS = YES
-GENERATE_HTMLHELP = NO
-CHM_FILE =
-HHC_LOCATION =
-GENERATE_CHI = NO
-BINARY_TOC = YES
-TOC_EXPAND = YES
-DISABLE_INDEX = YES
-ENUM_VALUES_PER_LINE = 4
-GENERATE_TREEVIEW = YES
-TREEVIEW_WIDTH = 250
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-GENERATE_LATEX = NO
-LATEX_OUTPUT = latex
-LATEX_CMD_NAME = latex
-MAKEINDEX_CMD_NAME = makeindex
-COMPACT_LATEX = NO
-PAPER_TYPE = a4wide
-EXTRA_PACKAGES =
-LATEX_HEADER =
-PDF_HYPERLINKS = NO
-USE_PDFLATEX = NO
-LATEX_BATCHMODE = NO
-LATEX_HIDE_INDICES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-GENERATE_RTF = NO
-RTF_OUTPUT = rtf
-COMPACT_RTF = NO
-RTF_HYPERLINKS = NO
-RTF_STYLESHEET_FILE =
-RTF_EXTENSIONS_FILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-GENERATE_MAN = NO
-MAN_OUTPUT = man
-MAN_EXTENSION = .3
-MAN_LINKS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-GENERATE_XML = NO
-XML_OUTPUT = xml
-XML_SCHEMA =
-XML_DTD =
-XML_PROGRAMLISTING = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-GENERATE_AUTOGEN_DEF = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-GENERATE_PERLMOD = NO
-PERLMOD_LATEX = NO
-PERLMOD_PRETTY = YES
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-ENABLE_PREPROCESSING = YES
-MACRO_EXPANSION = YES
-EXPAND_ONLY_PREDEF = NO
-SEARCH_INCLUDES = YES
-INCLUDE_PATH =
-INCLUDE_FILE_PATTERNS =
-PREDEFINED =
-EXPAND_AS_DEFINED =
-SKIP_FUNCTION_MACROS = NO
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-TAGFILES =
-GENERATE_TAGFILE =
-ALLEXTERNALS = NO
-EXTERNAL_GROUPS = YES
-PERL_PATH = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-CLASS_DIAGRAMS = YES
-HIDE_UNDOC_RELATIONS = NO
-HAVE_DOT = YES
-CLASS_GRAPH = YES
-COLLABORATION_GRAPH = NO
-UML_LOOK = NO
-TEMPLATE_RELATIONS = YES
-INCLUDE_GRAPH = YES
-INCLUDED_BY_GRAPH = NO
-CALL_GRAPH = NO
-GRAPHICAL_HIERARCHY = YES
-DOT_IMAGE_FORMAT = jpg
-DOT_PATH =
-DOTFILE_DIRS =
-MAX_DOT_GRAPH_WIDTH = 1024
-MAX_DOT_GRAPH_HEIGHT = 1200
-MAX_DOT_GRAPH_DEPTH = 0
-GENERATE_LEGEND = NO
-DOT_CLEANUP = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine
-#---------------------------------------------------------------------------
-SEARCHENGINE = NO
<meta name="GENERATOR" content="Mozilla/4.73 [en] (WinNT; I) [Netscape]">
<title>Main Page</title>
<link href="doxygen.css" rel="stylesheet" type="text/css">
+<link href="tabs.css" rel="stylesheet" type="text/css">
</head>
<body>
-<center><table WIDTH="96%" >
-<tr>
-<td><a href="http://www.opencascade.com"><img src="sources/logocorp.gif" BORDER=0 height=46 width=122></a></td>
-
-
-<td>
-<div align=right><a href="http://www.opencascade.org/SALOME/"><img src="sources/application.gif" BORDER=0 height=46 width=108></a></div>
-</td>
-</tr>
-</table></center>
-
-
</body>
</html>
-H1 { text-align: center; }
-CAPTION { font-weight: bold }
+H1 {
+ text-align: center;
+}
+
+CAPTION {
+ font-weight: bold
+}
+
+/* Link in the top navbar */
A.qindex {}
+
A.qindexRef {}
-A.el { text-decoration: none; font-weight: bold }
-A.elRef { font-weight: bold }
-A.code { text-decoration: none; font-weight: normal; color: #4444ee }
-A.codeRef { font-weight: normal; color: #4444ee }
-A:hover { text-decoration: none; background-color: lightblue }
-DL.el { margin-left: -1cm }
-DIV.fragment { width: 100%; border: none; background-color: #CCCCCC }
-DIV.ah { background-color: #CCCCCC; font-weight: bold; color: #ffffff; margin-bottom: 3px; margin-top: 3px }
-TD.md { background-color: lightblue; font-weight: bold; }
-TD.mdname1 { background-color: lightblue; font-weight: bold; color: #602020; }
-TD.mdname { background-color: lightblue; font-weight: bold; color: #602020; width: 600px; }
-DIV.groupHeader { margin-left: 16px; margin-top: 12px; margin-bottom: 6px; font-weight: bold }
-DIV.groupText { margin-left: 16px; font-style: italic; font-size: smaller }
-BODY { background: url(sources/bg_salome.gif) }
+
+/* Link to any cross-referenced Doxygen element */
+A.el {
+ text-decoration: none;
+ font-weight: bold
+}
+
+A.elRef {
+ font-weight: bold
+}
+
+/* Link to any cross-referenced Doxygen element inside a code section
+ (ex: header)
+*/
+A.code {
+ text-decoration: none;
+ font-weight: normal;
+ color: #4444ee
+}
+
+A.codeRef {
+ font-weight: normal;
+ color: #4444ee
+}
+
+A:hover {
+ text-decoration: none;
+ background-color: lightblue
+}
+
+DL.el {
+ margin-left: -1cm
+}
+
+/* A code fragment (ex: header) */
+DIV.fragment {
+ width: 100%;
+ border: none;
+ background-color: #CCCCCC
+}
+
+/* In the alpha list (coumpound index), style of an alphabetical index letter */
+DIV.ah {
+ background-color: #CCCCCC;
+ font-weight: bold;
+ color: #ffffff;
+ margin-bottom: 3px;
+ margin-top: 3px
+}
+
+/* Method name (+ type) */
+TD.md {
+ background-color: lightblue;
+ font-weight: bold;
+}
+
+/* Method parameter (some of them) */
+TD.mdname1 {
+ background-color: lightblue;
+ font-weight: bold; color: #602020;
+}
+
+/* Method parameter (some of them) */
+TD.mdname {
+ background-color: lightblue;
+ font-weight: bold;
+ color: #602020;
+ width: 600px;
+}
+
+/* Separator between methods group (usually empty, seems not supported by IE) */
+DIV.groupHeader {
+ margin-left: 16px;
+ margin-top: 12px;
+ margin-bottom: 6px;
+ font-weight: bold
+}
+
+DIV.groupText {
+ margin-left: 16px;
+ font-style: italic;
+ font-size: smaller
+}
+
+BODY {
+ background: #FFFFFF;
+}
+
+/*div.div-page {
+ background-color: #FFFFFF;
+ margin-left: 1em;
+ margin-right: 1em;
+ margin-top: 1em;
+ margin-bottom: 0.1em;
+
+ padding-left: 1em;
+ padding-right: 1em;
+ padding-top: 0.5em;
+ padding-bottom: 0.5em;
+
+ border: 2px solid #0D299A;
+ border-width: 2px;
+ border-color: #0D299A;
+}*/
+
+div.tabs {
+ text-align: justify;
+ margin-left : 2px;
+ margin-right : 2px;
+ margin-top : 2px;
+ margin-bottom : 2px
+ font-weight: bold;
+ color: #FFFFFF;
+}
+
+DIV.div-footer {
+ margin-left: 1em;
+ margin-right: 1em;
+ margin-bottom: 0.2em;
+ text-align: right;
+ font-size: 9pt;
+}
+
+/* In File List, Coumpound List, etc, 1st column of the index */
TD.indexkey {
background-color: #CCCCCC;
font-weight: bold;
margin-top : 2px;
margin-bottom : 2px
}
+
+/* In File List, Coumpound List, etc, 2nd column of the index */
TD.indexvalue {
background-color: #CCCCCC;
font-style: italic;
margin-top : 2px;
margin-bottom : 2px
}
+
span.keyword { color: #008000 }
span.keywordtype { color: #604020 }
span.keywordflow { color: #e08000 }
+++ /dev/null
-foldersTree = gFld("<b>SALOME v.3.2.0a1 </b>", "", "")
- insDoc(foldersTree, gLnk("Main Page", "", "main.html"))
-
-aux1 = insFld(foldersTree, gFld("TUI Reference Guide", ""))
- aux2 = insFld(aux1, gFld("Modules", ""))
- aux3 = insFld(aux2, gFld("SALOME MED module", ""))
-/*! insDoc(aux3, gLnk("Overview", "", "overview_Med.html"))*/
- aux4 = insFld(aux3, gFld("Packages", ""))
- insDoc(aux4, gLnk("SALOME_MED", "", "namespaceSALOME__MED.html"))
-/*! insDoc(aux3, gLnk("Examples", "", "examples_MED.html"))
-*/
-
- insDoc(aux1, gLnk("Data Structures", "", "annotated.html"))
- insDoc(aux1, gLnk("Class Hierarchy", "", "hierarchy.html"))
- insDoc(aux1, gLnk("Class methods list", "", "functions.html"))
- insDoc(aux1, gLnk("Namespace Members", "", "namespacemembers.html"))
- insDoc(aux1, gLnk("File List", "", "files.html"))
-
-aux1 = insFld(foldersTree, gFld("IDL/Python mapping", ""))
- insDoc(aux1, gLnk("Mapping of MED IDL definitions to Python language", "", "page2.html"))
# Copyright (C) 2003 CEA/DEN, EDF R&D
#
-#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
# File : Makefile.in
# Author : Vasily Rusyaev (Open Cascade NN)
@COMMENCE@
-docs:
+dev_docs:
cp -fr $(srcdir)/MED ./INPUT; \
+ cp -fr ./MED/doxyfile ./INPUT; \
+ cp -fr ./MED/sources/static/tree.js ./INPUT/sources/static; \
cd INPUT; \
sed 's|../../../share/salome|$(root_srcdir)|' ./doxyfile > ./doxyfile1; \
+ sed 's|../../build/salome|$(top_builddir)|' ./doxyfile1 > ./doxyfile2; \
+ mv -f doxyfile2 doxyfile1; \
+ echo "DOXYGEN SUPPORT PYTHON - @DOXYGEN_WITH_PYTHON@"; \
+ if( test "x@DOXYGEN_WITH_PYTHON@" = "xyes"); then \
+ sed 's|python_extension_must_be_here|*.py|' ./doxyfile1 > ./doxyfile2; \
+ mv -f doxyfile2 doxyfile1; \
+ $(doxygen) -u ./doxyfile1; \
+ else \
+ sed 's|python_extension_must_be_here||' ./doxyfile1 > ./doxyfile2; \
+ mv -f doxyfile2 doxyfile1; \
+ fi; \
mv -f doxyfile1 doxyfile; \
$(doxygen) ./doxyfile; \
cd ..; \
