#
# Test of deep nested results history.
-# Copied boxes are involved to Fill operation.
+# Copied boxes are involved to Split operation.
# Check the groups of initial boxes moved to the end contain the corresponding
# results, but divided.
Group_6_objects = [model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Right][LinearCopy_1_1_2/MF:Translated&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Left][LinearCopy_1_1_2/MF:Translated&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Left][LinearCopy_1_1_2/MF:Translated&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Right][LinearCopy_1_1_2/MF:Translated&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated&Box_1_1/Top]")]
Group_6 = model.addGroup(Part_1_doc, Group_6_objects)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "LinearCopy_1_1_1/MF:Translated&Box_1_1/Left"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated&Box_1_1/Right"))
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_1")], [model.selection("SOLID", "LinearCopy_1_1_2"), model.selection("FACE", "Plane_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_1")], [model.selection("SOLID", "LinearCopy_1_1_2"), model.selection("FACE", "Plane_1")])
model.do()
# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), Fill_1.feature())
+Part_1_doc.moveFeature(Group_1.feature(), Split_1.feature())
Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
model.begin()
-Filling_1 = model.addFilling(Part_1_doc, [model.selection("EDGE", "Fill_1_1_2/Generated_Edge&Plane_1/Plane_1&Box_1_1/Top"), model.selection("EDGE", "[Fill_1_1_2/Modified_Face&Box_1_1/Right][(Fill_1_1_2/Modified_Face&Box_1_1/Right)(Fill_1_1_2/Modified_Face&Plane_1/Plane_1)(Fill_1_1_2/Modified_Face&Box_1_1/Front)(Fill_1_1_2/Modified_Face&Box_1_1/Top)2(Fill_1_1_2/Modified_Face&Box_1_1/Left)2]")])
-Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_1_1_2")], [model.selection("FACE", "Filling_1_1")])
+Filling_1 = model.addFilling(Part_1_doc, [model.selection("EDGE", "Split_1_1_2/Generated_Edge&Plane_1/Plane_1&Box_1_1/Top"), model.selection("EDGE", "[Split_1_1_2/Modified_Face&Box_1_1/Right][(Split_1_1_2/Modified_Face&Box_1_1/Right)(Split_1_1_2/Modified_Face&Plane_1/Plane_1)(Split_1_1_2/Modified_Face&Box_1_1/Front)(Split_1_1_2/Modified_Face&Box_1_1/Top)2(Split_1_1_2/Modified_Face&Box_1_1/Left)2]")])
+Split_2 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Split_1_1_2")], [model.selection("FACE", "Filling_1_1")])
model.do()
# move groups to the end once again
-Part_1_doc.moveFeature(Group_1.feature(), Fill_2.feature())
+Part_1_doc.moveFeature(Group_1.feature(), Split_2.feature())
Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
#
# Test based on DBC mail 04.03.2019. If the selected solid was not modified by
-# the following Fill operation, this selection disappears after movement to the end.
+# the following Split operation, this selection disappears after movement to the end.
from GeomAPI import *
from ModelAPI import *
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), 2, True)
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), 7, True)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("FACE", "Plane_2")])
-Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Fill_1_1_1")])
-Fill_2 = model.addFill(Part_1_doc, [model.selection("COMPSOLID", "Fill_1_1")], [model.selection("FACE", "Plane_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("FACE", "Plane_2")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Split_1_1_1")])
+Split_2 = model.addSplit(Part_1_doc, [model.selection("COMPSOLID", "Split_1_1")], [model.selection("FACE", "Plane_1")])
model.do()
# move group
-Part_1_doc.moveFeature(Group_1.feature(), Fill_2.feature())
+Part_1_doc.moveFeature(Group_1.feature(), Split_2.feature())
model.end()
# Check group: result must be four faces
TestBoolean3.py
TestBooleanCompSolids.py
TestBooleanSmash.py
- TestBooleanFill.py
- TestBooleanFillWithPlane.py
- TestBooleanFill_ErrorMsg.py
+ TestBooleanSplit.py
+ TestBooleanSplitWithPlane.py
+ TestBooleanSplit_ErrorMsg.py
TestMultiBoolean.py
TestSerialBoolean.py
TestBoolean_ErrorMsg.py
TestPipe_ErrorMsg.py
TestRecover.py
TestRecover1798.py
- TestFillEdgeVertex.py
- TestFillEdgeEdge.py
- TestFillEdgeEdgeIntersected.py
- TestFillEdgeWire.py
- TestFillEdgeFace.py
- TestFillEdgeShell.py
- TestFillEdgeSolid.py
- TestFillEdgeSolidIntersected.py
- TestFillWireVertex.py
- TestFillWireEdge.py
- TestFillWireWire.py
- TestFillWireFace.py
- TestFillWireShell.py
- TestFillWireSolid.py
- TestFillFaceVertex.py
- TestFillFaceEdge.py
- TestFillFaceEdgeInside.py
- TestFillFaceEdgePerpendicular.py
- TestFillFaceWire.py
- TestFillFaceFace.py
- TestFillFaceShell.py
- TestFillFaceSolid.py
- TestFillCompFaceSolid.py
- TestFillShellVertex.py
- TestFillShellEdge.py
- TestFillShellConstrPlane.py
- TestFillShellWire.py
- TestFillShellFace.py
- TestFillShellShell.py
- TestFillShellSolid.py
- TestFillSolid2ConstructionPlanes.py
- TestFillSolidEdge.py
- TestFillSolidFace.py
- TestFillSolidCompFace.py
- TestFillSolidShell.py
- TestFillSolidCompShell.py
- TestFillCompsolidPlane.py
+ TestSplitEdgeVertex.py
+ TestSplitEdgeEdge.py
+ TestSplitEdgeEdgeIntersected.py
+ TestSplitEdgeWire.py
+ TestSplitEdgeFace.py
+ TestSplitEdgeShell.py
+ TestSplitEdgeSolid.py
+ TestSplitEdgeSolidIntersected.py
+ TestSplitWireVertex.py
+ TestSplitWireEdge.py
+ TestSplitWireWire.py
+ TestSplitWireFace.py
+ TestSplitWireShell.py
+ TestSplitWireSolid.py
+ TestSplitFaceVertex.py
+ TestSplitFaceEdge.py
+ TestSplitFaceEdgeInside.py
+ TestSplitFaceEdgePerpendicular.py
+ TestSplitFaceWire.py
+ TestSplitFaceFace.py
+ TestSplitFaceShell.py
+ TestSplitFaceSolid.py
+ TestSplitCompFaceSolid.py
+ TestSplitShellVertex.py
+ TestSplitShellEdge.py
+ TestSplitShellConstrPlane.py
+ TestSplitShellWire.py
+ TestSplitShellFace.py
+ TestSplitShellShell.py
+ TestSplitShellSolid.py
+ TestSplitSolid2ConstructionPlanes.py
+ TestSplitSolidEdge.py
+ TestSplitSolidFace.py
+ TestSplitSolidCompFace.py
+ TestSplitSolidShell.py
+ TestSplitSolidCompShell.py
+ TestSplitCompsolidPlane.py
TestPartition2Faces.py
TestPartition2Solids.py
TestPartition2Wires.py
TestMeasurementAngle3Points.py
TestMeasurementPresentation.py
TestFusionFaces.py
- TestFusionFaces2697.py
+ TestFusionFaces2697.py
Test1379.py
Test1922.py
Test1942.py
SketchLine_9 = SketchProjection_4.createdFeature()
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.result())
Extrusion_1.setNestedSketch(Sketch_2)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1")])
Point_2 = model.addPoint(Part_1_doc, "x", "y", "-z")
-Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "[Fill_1_1_2/Modified_Face&Sketch_2/SketchLine_5&Revolution_1_1/To_Face][Fill_1_1_2/Modified_Face&Sketch_2/SketchLine_4&Revolution_1_1/From_Face][Fill_1_1_2/Modified_Face&Extrusion_1_1/To_Face&Sketch_1/SketchLine_3]"))
+Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "[Split_1_1_2/Modified_Face&Sketch_2/SketchLine_5&Revolution_1_1/To_Face][Split_1_1_2/Modified_Face&Sketch_2/SketchLine_4&Revolution_1_1/From_Face][Split_1_1_2/Modified_Face&Extrusion_1_1/To_Face&Sketch_1/SketchLine_3]"))
Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Point_1"), True)
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "haut_ext_tuyau", True)
Plane_5.result().setName("Plane_2 arrivee tuyau")
Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_6"), model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_6][Extrusion_1_1/From_Face]"), 45)
Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_7"), model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_7][Extrusion_1_1/From_Face]"), 45)
Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_7"), model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_7]"), "90+45")
-Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_1_1_1")], [model.selection("FACE", "Plane_5")])
-Fill_3 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_2_1_2")], [model.selection("FACE", "Plane_3")])
-Fill_4 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_3_1_2")], [model.selection("FACE", "Plane_4")])
-Fill_4.result().setColor(102, 51, 51)
-Fill_4.result().subResult(0).setColor(153, 153, 76)
-Fill_4.result().subResult(1).setColor(0, 204, 204)
-Fill_4.result().subResult(2).setColor(51, 51, 102)
-Fill_4.result().subResult(3).setColor(102, 204, 102)
-Fill_4.result().subResult(4).setColor(204, 204, 0)
-Union_1 = model.addUnion(Part_1_doc, [model.selection("SOLID", "Fill_4_1_4"), model.selection("SOLID", "Fill_4_1_2")])
+Split_2 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Split_1_1_1")], [model.selection("FACE", "Plane_5")])
+Split_3 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Split_2_1_2")], [model.selection("FACE", "Plane_3")])
+Split_4 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Split_3_1_2")], [model.selection("FACE", "Plane_4")])
+Split_4.result().setColor(102, 51, 51)
+Split_4.result().subResult(0).setColor(153, 153, 76)
+Split_4.result().subResult(1).setColor(0, 204, 204)
+Split_4.result().subResult(2).setColor(51, 51, 102)
+Split_4.result().subResult(3).setColor(102, 204, 102)
+Split_4.result().subResult(4).setColor(204, 204, 0)
+Union_1 = model.addUnion(Part_1_doc, [model.selection("SOLID", "Split_4_1_4"), model.selection("SOLID", "Split_4_1_2")])
Point_3 = model.addPoint(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("FACE", "Plane_2 arrivee tuyau"))
Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2 arrivee tuyau"))
SketchProjection_5 = Sketch_3.addProjection(model.selection("VERTEX", "Point_2"), False)
Plane_14 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Modified_Face&Sketch_3/SketchLine_13"), model.selection("EDGE", "[Recover_1_1/Modified_Face&Sketch_3/SketchLine_13][Recover_1_1/Modified_Face&Extrusion_3_1/To_Face]"), "90+45")
Plane_15 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Modified_Face&Sketch_3/SketchLine_12"), model.selection("EDGE", "[Recover_1_1/Modified_Face&Sketch_3/SketchLine_12][Recover_1_1/Modified_Face&Extrusion_3_1/To_Face]"), "90+45")
Plane_16 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Modified_Face&Extrusion_3_1/To_Face"), model.selection("EDGE", "[Recover_1_1/Modified_Face&Sketch_3/SketchLine_11][Recover_1_1/Modified_Face&Extrusion_3_1/To_Face]"), 45)
-Fill_5_objects_2 = [model.selection("FACE", "Plane_6"), model.selection("FACE", "Plane_7"), model.selection("FACE", "Plane_8"), model.selection("FACE", "Plane_9"), model.selection("FACE", "Plane_10"), model.selection("FACE", "Plane_11"), model.selection("FACE", "Plane_12"), model.selection("FACE", "Plane_13")]
-Fill_5 = model.addFill(Part_1_doc, [model.selection("SOLID", "demi-sphere")], Fill_5_objects_2)
-Fill_5.result().subResult(0).setName("Fill_5_1_1")
-Fill_5.result().subResult(1).setName("Fill_5_1_2")
-Fill_5.result().subResult(2).setName("Fill_5_1_3")
-Fill_5.result().subResult(3).setName("Fill_5_1_4")
-Fill_5.result().subResult(4).setName("Fill_5_1_5")
-Fill_5.result().subResult(5).setName("Fill_5_1_6")
-Fill_5.result().subResult(6).setName("Fill_5_1_7")
-Fill_5.result().subResult(7).setName("Fill_5_1_8")
-Fill_5.result().subResult(8).setName("Fill_5_1_9")
-Fill_5.result().subResult(9).setName("Fill_5_1_10")
-Fill_5.result().subResult(10).setName("Fill_5_1_11")
-Fill_5.result().subResult(11).setName("Fill_5_1_12")
-Fill_5.result().subResult(12).setName("Fill_5_1_13")
-Fill_5.result().subResult(13).setName("Fill_5_1_14")
-Fill_5.result().subResult(14).setName("Fill_5_1_15")
-Fill_5.result().subResult(15).setName("Fill_5_1_16")
-Union_2_objects = [model.selection("SOLID", "Fill_5_1_14"), model.selection("SOLID", "Fill_5_1_15"), model.selection("SOLID", "Fill_5_1_16")]
+Split_5_objects_2 = [model.selection("FACE", "Plane_6"), model.selection("FACE", "Plane_7"), model.selection("FACE", "Plane_8"), model.selection("FACE", "Plane_9"), model.selection("FACE", "Plane_10"), model.selection("FACE", "Plane_11"), model.selection("FACE", "Plane_12"), model.selection("FACE", "Plane_13")]
+Split_5 = model.addSplit(Part_1_doc, [model.selection("SOLID", "demi-sphere")], Split_5_objects_2)
+Split_5.result().subResult(0).setName("Split_5_1_1")
+Split_5.result().subResult(1).setName("Split_5_1_2")
+Split_5.result().subResult(2).setName("Split_5_1_3")
+Split_5.result().subResult(3).setName("Split_5_1_4")
+Split_5.result().subResult(4).setName("Split_5_1_5")
+Split_5.result().subResult(5).setName("Split_5_1_6")
+Split_5.result().subResult(6).setName("Split_5_1_7")
+Split_5.result().subResult(7).setName("Split_5_1_8")
+Split_5.result().subResult(8).setName("Split_5_1_9")
+Split_5.result().subResult(9).setName("Split_5_1_10")
+Split_5.result().subResult(10).setName("Split_5_1_11")
+Split_5.result().subResult(11).setName("Split_5_1_12")
+Split_5.result().subResult(12).setName("Split_5_1_13")
+Split_5.result().subResult(13).setName("Split_5_1_14")
+Split_5.result().subResult(14).setName("Split_5_1_15")
+Split_5.result().subResult(15).setName("Split_5_1_16")
+Union_2_objects = [model.selection("SOLID", "Split_5_1_14"), model.selection("SOLID", "Split_5_1_15"), model.selection("SOLID", "Split_5_1_16")]
Union_2 = model.addUnion(Part_1_doc, Union_2_objects)
Union_2.result().subResult(0).setName("Union_2_1_1")
Union_2.result().subResult(1).setName("Union_2_1_2")
Face_2.result().setName("Face_5_1")
LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "Sketch_1/SketchLine_9"), 10, 2)
LinearCopy_1.result().setName("LinearCopy")
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("COMPOUND", "LinearCopy")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("COMPOUND", "LinearCopy")])
model.do()
model.end()
from GeomAPI import GeomAPI_Shape
-model.testNbResults(Fill_1, 1)
-model.testNbSubResults(Fill_1, [3])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.SOLID, [0])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.FACE, [3])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.EDGE, [20])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.VERTEX, [40])
+model.testNbResults(Split_1, 1)
+model.testNbSubResults(Split_1, [3])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [3])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [20])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [40])
assert(model.checkPythonDump())
Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Sketch_1/SketchLine_7_EndVertex"), model.selection("VERTEX", "Sketch_1/SketchLine_1_StartVertex"))
LinearCopy_5 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_4_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 2)
Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
-Fill_1_objects_2 = [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_12"), model.selection("FACE", "Face_4_1"), model.selection("COMPOUND", "LinearCopy_1_1"), model.selection("COMPOUND", "LinearCopy_2_1"), model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "LinearCopy_4_1"), model.selection("COMPOUND", "LinearCopy_5_1")]
-Fill_1 = model.addFill(Part_1_doc, [model.selection("COMPOUND", "Partition_1_1")], Fill_1_objects_2)
+Split_1_objects_2 = [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_12"), model.selection("FACE", "Face_4_1"), model.selection("COMPOUND", "LinearCopy_1_1"), model.selection("COMPOUND", "LinearCopy_2_1"), model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "LinearCopy_4_1"), model.selection("COMPOUND", "LinearCopy_5_1")]
+Split_1 = model.addSplit(Part_1_doc, [model.selection("COMPOUND", "Partition_1_1")], Split_1_objects_2)
model.do()
model.end()
from GeomAPI import GeomAPI_Shape
-model.testNbResults(Fill_1, 1)
-model.testNbSubResults(Fill_1, [60])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.SOLID, [0])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.FACE, [60])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.EDGE, [273])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.VERTEX, [546])
+model.testNbResults(Split_1, 1)
+model.testNbSubResults(Split_1, [60])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [60])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [273])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [546])
assert(model.checkPythonDump())
Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Sketch_1/SketchLine_7_EndVertex"), model.selection("VERTEX", "Sketch_1/SketchLine_1_StartVertex"))
LinearCopy_5 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_4_1")], model.selection("EDGE", "PartSet/OX"), "length_assemblage", 2)
Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
-Fill_1_objects_2 = [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_12"), model.selection("FACE", "Face_4_1"), model.selection("COMPOUND", "LinearCopy_1_1"), model.selection("COMPOUND", "LinearCopy_2_1"), model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "LinearCopy_4_1"), model.selection("COMPOUND", "LinearCopy_5_1")]
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], Fill_1_objects_2)
+Split_1_objects_2 = [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_12"), model.selection("FACE", "Face_4_1"), model.selection("COMPOUND", "LinearCopy_1_1"), model.selection("COMPOUND", "LinearCopy_2_1"), model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "LinearCopy_4_1"), model.selection("COMPOUND", "LinearCopy_5_1")]
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], Split_1_objects_2)
model.do()
model.end()
from GeomAPI import GeomAPI_Shape
-model.testNbResults(Fill_1, 1)
-model.testNbSubResults(Fill_1, [0])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.SOLID, [0])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.FACE, [60])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.EDGE, [273])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.VERTEX, [546])
+model.testNbResults(Split_1, 1)
+model.testNbSubResults(Split_1, [0])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [60])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [273])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [546])
assert(model.checkPythonDump())
Edge_1 = model.addEdge(Part_2_doc, Edge_1_objects)
Extrusion_1_objects = [model.selection("EDGE", "Edge_1_1"), model.selection("EDGE", "Edge_1_2"), model.selection("EDGE", "Edge_1_3"), model.selection("EDGE", "Edge_1_4"), model.selection("EDGE", "Edge_1_5"), model.selection("EDGE", "Edge_1_6"), model.selection("EDGE", "Edge_1_7"), model.selection("EDGE", "Edge_1_8"), model.selection("EDGE", "Edge_1_9"), model.selection("EDGE", "Edge_1_10"), model.selection("EDGE", "Edge_1_11"), model.selection("EDGE", "Edge_1_12"), model.selection("EDGE", "Edge_1_13"), model.selection("EDGE", "Edge_1_14")]
Extrusion_1 = model.addExtrusion(Part_2_doc, Extrusion_1_objects, model.selection("EDGE", "PartSet/OX"), 300, 0)
-Fill_1_objects_2 = [model.selection("FACE", "Extrusion_1_1"), model.selection("FACE", "Extrusion_1_2"), model.selection("FACE", "Extrusion_1_3"), model.selection("FACE", "Extrusion_1_4"), model.selection("FACE", "Extrusion_1_5"), model.selection("FACE", "Extrusion_1_6"), model.selection("FACE", "Extrusion_1_7"), model.selection("FACE", "Extrusion_1_8"), model.selection("FACE", "Extrusion_1_9"), model.selection("FACE", "Extrusion_1_10"), model.selection("FACE", "Extrusion_1_11"), model.selection("FACE", "Extrusion_1_12"), model.selection("FACE", "Extrusion_1_13"), model.selection("FACE", "Extrusion_1_14")]
-Fill_1 = model.addFill(Part_2_doc, [model.selection("COMPSOLID", "Revolution_1_1")], Fill_1_objects_2)
-Group_1_objects = [model.selection("SOLID", "Fill_1_1_25"), model.selection("SOLID", "Fill_1_1_28"), model.selection("SOLID", "Fill_1_1_26"), model.selection("SOLID", "Fill_1_1_27"), model.selection("SOLID", "Fill_1_1_31"), model.selection("SOLID", "Fill_1_1_35"), model.selection("SOLID", "Fill_1_1_36"), model.selection("SOLID", "Fill_1_1_32"), model.selection("SOLID", "Fill_1_1_34"), model.selection("SOLID", "Fill_1_1_30"), model.selection("SOLID", "Fill_1_1_33"), model.selection("SOLID", "Fill_1_1_29")]
+Split_1_objects_2 = [model.selection("FACE", "Extrusion_1_1"), model.selection("FACE", "Extrusion_1_2"), model.selection("FACE", "Extrusion_1_3"), model.selection("FACE", "Extrusion_1_4"), model.selection("FACE", "Extrusion_1_5"), model.selection("FACE", "Extrusion_1_6"), model.selection("FACE", "Extrusion_1_7"), model.selection("FACE", "Extrusion_1_8"), model.selection("FACE", "Extrusion_1_9"), model.selection("FACE", "Extrusion_1_10"), model.selection("FACE", "Extrusion_1_11"), model.selection("FACE", "Extrusion_1_12"), model.selection("FACE", "Extrusion_1_13"), model.selection("FACE", "Extrusion_1_14")]
+Split_1 = model.addSplit(Part_2_doc, [model.selection("COMPSOLID", "Revolution_1_1")], Split_1_objects_2)
+Group_1_objects = [model.selection("SOLID", "Split_1_1_25"), model.selection("SOLID", "Split_1_1_28"), model.selection("SOLID", "Split_1_1_26"), model.selection("SOLID", "Split_1_1_27"), model.selection("SOLID", "Split_1_1_31"), model.selection("SOLID", "Split_1_1_35"), model.selection("SOLID", "Split_1_1_36"), model.selection("SOLID", "Split_1_1_32"), model.selection("SOLID", "Split_1_1_34"), model.selection("SOLID", "Split_1_1_30"), model.selection("SOLID", "Split_1_1_33"), model.selection("SOLID", "Split_1_1_29")]
Group_1 = model.addGroup(Part_2_doc, Group_1_objects)
Group_1.setName("CORPS")
Group_1.result().setName("CORPS")
-Group_2_objects = [model.selection("SOLID", "Fill_1_1_41"), model.selection("SOLID", "Fill_1_1_49"), model.selection("SOLID", "Fill_1_1_69"), model.selection("SOLID", "Fill_1_1_71"), model.selection("SOLID", "Fill_1_1_51"), model.selection("SOLID", "Fill_1_1_43"), model.selection("SOLID", "Fill_1_1_44"), model.selection("SOLID", "Fill_1_1_67"), model.selection("SOLID", "Fill_1_1_39"), model.selection("SOLID", "Fill_1_1_47"), model.selection("SOLID", "Fill_1_1_45"), model.selection("SOLID", "Fill_1_1_37"), model.selection("SOLID", "Fill_1_1_65"), model.selection("SOLID", "Fill_1_1_66"), model.selection("SOLID", "Fill_1_1_38"), model.selection("SOLID", "Fill_1_1_46"), model.selection("SOLID", "Fill_1_1_48"), model.selection("SOLID", "Fill_1_1_40"), model.selection("SOLID", "Fill_1_1_68"), model.selection("SOLID", "Fill_1_1_42"), model.selection("SOLID", "Fill_1_1_70"), model.selection("SOLID", "Fill_1_1_50"), model.selection("SOLID", "Fill_1_1_52"), model.selection("SOLID", "Fill_1_1_72"), model.selection("SOLID", "Fill_1_1_63"), model.selection("SOLID", "Fill_1_1_64"), model.selection("SOLID", "Fill_1_1_61"), model.selection("SOLID", "Fill_1_1_62"), model.selection("SOLID", "Fill_1_1_58"), model.selection("SOLID", "Fill_1_1_57"), model.selection("SOLID", "Fill_1_1_54"), model.selection("SOLID", "Fill_1_1_53"), model.selection("SOLID", "Fill_1_1_55"), model.selection("SOLID", "Fill_1_1_56"), model.selection("SOLID", "Fill_1_1_60"), model.selection("SOLID", "Fill_1_1_59")]
+Group_2_objects = [model.selection("SOLID", "Split_1_1_41"), model.selection("SOLID", "Split_1_1_49"), model.selection("SOLID", "Split_1_1_69"), model.selection("SOLID", "Split_1_1_71"), model.selection("SOLID", "Split_1_1_51"), model.selection("SOLID", "Split_1_1_43"), model.selection("SOLID", "Split_1_1_44"), model.selection("SOLID", "Split_1_1_67"), model.selection("SOLID", "Split_1_1_39"), model.selection("SOLID", "Split_1_1_47"), model.selection("SOLID", "Split_1_1_45"), model.selection("SOLID", "Split_1_1_37"), model.selection("SOLID", "Split_1_1_65"), model.selection("SOLID", "Split_1_1_66"), model.selection("SOLID", "Split_1_1_38"), model.selection("SOLID", "Split_1_1_46"), model.selection("SOLID", "Split_1_1_48"), model.selection("SOLID", "Split_1_1_40"), model.selection("SOLID", "Split_1_1_68"), model.selection("SOLID", "Split_1_1_42"), model.selection("SOLID", "Split_1_1_70"), model.selection("SOLID", "Split_1_1_50"), model.selection("SOLID", "Split_1_1_52"), model.selection("SOLID", "Split_1_1_72"), model.selection("SOLID", "Split_1_1_63"), model.selection("SOLID", "Split_1_1_64"), model.selection("SOLID", "Split_1_1_61"), model.selection("SOLID", "Split_1_1_62"), model.selection("SOLID", "Split_1_1_58"), model.selection("SOLID", "Split_1_1_57"), model.selection("SOLID", "Split_1_1_54"), model.selection("SOLID", "Split_1_1_53"), model.selection("SOLID", "Split_1_1_55"), model.selection("SOLID", "Split_1_1_56"), model.selection("SOLID", "Split_1_1_60"), model.selection("SOLID", "Split_1_1_59")]
Group_2 = model.addGroup(Part_2_doc, Group_2_objects)
Group_2.setName("TETE")
Group_2.result().setName("TETE")
-Group_3_objects = [model.selection("SOLID", "Fill_1_1_2"), model.selection("SOLID", "Fill_1_1_1"), model.selection("SOLID", "Fill_1_1_5"), model.selection("SOLID", "Fill_1_1_9"), model.selection("SOLID", "Fill_1_1_13"), model.selection("SOLID", "Fill_1_1_14"), model.selection("SOLID", "Fill_1_1_15"), model.selection("SOLID", "Fill_1_1_19"), model.selection("SOLID", "Fill_1_1_11"), model.selection("SOLID", "Fill_1_1_12"), model.selection("SOLID", "Fill_1_1_24"), model.selection("SOLID", "Fill_1_1_23"), model.selection("SOLID", "Fill_1_1_16"), model.selection("SOLID", "Fill_1_1_8"), model.selection("SOLID", "Fill_1_1_20"), model.selection("SOLID", "Fill_1_1_4"), model.selection("SOLID", "Fill_1_1_3"), model.selection("SOLID", "Fill_1_1_7"), model.selection("SOLID", "Fill_1_1_10"), model.selection("SOLID", "Fill_1_1_6")]
+Group_3_objects = [model.selection("SOLID", "Split_1_1_2"), model.selection("SOLID", "Split_1_1_1"), model.selection("SOLID", "Split_1_1_5"), model.selection("SOLID", "Split_1_1_9"), model.selection("SOLID", "Split_1_1_13"), model.selection("SOLID", "Split_1_1_14"), model.selection("SOLID", "Split_1_1_15"), model.selection("SOLID", "Split_1_1_19"), model.selection("SOLID", "Split_1_1_11"), model.selection("SOLID", "Split_1_1_12"), model.selection("SOLID", "Split_1_1_24"), model.selection("SOLID", "Split_1_1_23"), model.selection("SOLID", "Split_1_1_16"), model.selection("SOLID", "Split_1_1_8"), model.selection("SOLID", "Split_1_1_20"), model.selection("SOLID", "Split_1_1_4"), model.selection("SOLID", "Split_1_1_3"), model.selection("SOLID", "Split_1_1_7"), model.selection("SOLID", "Split_1_1_10"), model.selection("SOLID", "Split_1_1_6")]
Group_3 = model.addGroup(Part_2_doc, Group_3_objects)
Group_3.setName("PIED")
Group_3.result().setName("PIED")
-Group_4 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Fill_1_1_36/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchLine_7")])
+Group_4 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Split_1_1_36/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchLine_7")])
Group_4.setName("corps_hauteur")
Group_4.result().setName("corps_hauteur")
-Group_5 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Fill_1_1_11/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchLine_5")])
+Group_5 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Split_1_1_11/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchLine_5")])
Group_5.setName("pied_hauteur")
Group_5.result().setName("pied_hauteur")
-Group_6 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Fill_1_1_24/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchLine_6")])
+Group_6 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Split_1_1_24/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchLine_6")])
Group_6.setName("chanfrein")
Group_6.result().setName("chanfrein")
-Group_7 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Fill_1_1_72/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchArc_1_2")])
+Group_7 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Split_1_1_72/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchArc_1_2")])
Group_7.setName("filet")
Group_7.result().setName("filet")
-Group_8 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Fill_1_1_42/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchLine_9")])
+Group_8 = model.addGroup(Part_2_doc, [model.selection("EDGE", "Split_1_1_42/Generated_Edge&Sketch_2/SketchLine_31&Sketch_1/SketchLine_9")])
Group_8.setName("tete_bas")
Group_8.result().setName("tete_bas")
-Group_9_objects = [model.selection("FACE", "Fill_1_1_12/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Fill_1_1_11/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Fill_1_1_9/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Fill_1_1_8/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Fill_1_1_4/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Fill_1_1_1/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Fill_1_1_2/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Fill_1_1_5/Modified_Face&Sketch_1/SketchLine_5")]
+Group_9_objects = [model.selection("FACE", "Split_1_1_12/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Split_1_1_11/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Split_1_1_9/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Split_1_1_8/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Split_1_1_4/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Split_1_1_1/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Split_1_1_2/Modified_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Split_1_1_5/Modified_Face&Sketch_1/SketchLine_5")]
Group_9 = model.addGroup(Part_2_doc, Group_9_objects)
Group_9.setName("ADH_PIEDS")
Group_9.result().setName("ADH_PIEDS")
-Group_10_objects = [model.selection("FACE", "Fill_1_1_13/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Fill_1_1_14/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Fill_1_1_25/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Fill_1_1_26/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Fill_1_1_15/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Fill_1_1_27/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Fill_1_1_19/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Fill_1_1_31/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Fill_1_1_23/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Fill_1_1_35/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Fill_1_1_24/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Fill_1_1_36/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Fill_1_1_32/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Fill_1_1_20/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Fill_1_1_16/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Fill_1_1_28/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Fill_1_1_70/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Fill_1_1_42/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Fill_1_1_68/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Fill_1_1_40/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Fill_1_1_66/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Fill_1_1_38/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Fill_1_1_37/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Fill_1_1_65/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Fill_1_1_39/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Fill_1_1_67/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Fill_1_1_69/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Fill_1_1_41/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Fill_1_1_43/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Fill_1_1_71/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Fill_1_1_44/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Fill_1_1_72/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Fill_1_1_52/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_44/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_43/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_51/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_50/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_42/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_40/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_48/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_46/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_38/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_37/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_45/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_39/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_47/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_49/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Fill_1_1_41/Modified_Face&Sketch_1/SketchLine_9")]
+Group_10_objects = [model.selection("FACE", "Split_1_1_13/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Split_1_1_14/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Split_1_1_25/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Split_1_1_26/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Split_1_1_15/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Split_1_1_27/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Split_1_1_19/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Split_1_1_31/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Split_1_1_23/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Split_1_1_35/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Split_1_1_24/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Split_1_1_36/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Split_1_1_32/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Split_1_1_20/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Split_1_1_16/Modified_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Split_1_1_28/Modified_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Split_1_1_70/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Split_1_1_42/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Split_1_1_68/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Split_1_1_40/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Split_1_1_66/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Split_1_1_38/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Split_1_1_37/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Split_1_1_65/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Split_1_1_39/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Split_1_1_67/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Split_1_1_69/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Split_1_1_41/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Split_1_1_43/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Split_1_1_71/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Split_1_1_44/Modified_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Split_1_1_72/Modified_Face&Sketch_1/SketchArc_1_2"), model.selection("FACE", "Split_1_1_52/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_44/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_43/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_51/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_50/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_42/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_40/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_48/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_46/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_38/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_37/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_45/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_39/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_47/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_49/Modified_Face&Sketch_1/SketchLine_9"), model.selection("FACE", "Split_1_1_41/Modified_Face&Sketch_1/SketchLine_9")]
Group_10 = model.addGroup(Part_2_doc, Group_10_objects)
Group_10.setName("CONTACT_VIS")
Group_10.result().setName("CONTACT_VIS")
-Translation_1 = model.addTranslation(Part_2_doc, [model.selection("COMPSOLID", "Fill_1_1")], 0, 100, 0)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("COMPSOLID", "Split_1_1")], 0, 100, 0)
AngularCopy_1 = model.addMultiRotation(Part_2_doc, [model.selection("COMPSOLID", "Translation_1_1")], model.selection("EDGE", "PartSet/OX"), 4)
model.do()
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_2")], model.selection(), 10, 0)
AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("COMPOUND", "all-in-Extrusion_1")], model.selection("EDGE", "PartSet/OZ"), "(90-2*a)/(n-1)", "n")
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", (30, 30, 0))], [model.selection("COMPOUND", (29.25281542867235, 29.25281542867235, 5))])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", (30, 30, 0))], [model.selection("COMPOUND", (29.25281542867235, 29.25281542867235, 5))])
model.end()
assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchCircle_1 = Sketch_1.addCircle(0, 0, 50)
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_2.addLine(25, 25, 100, 25)
-SketchLine_2 = Sketch_2.addLine(100, 25, 60, 75)
-SketchLine_3 = Sketch_2.addLine(60, 75, 25, 25)
-model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1"), model.selection("COMPOUND", "Sketch_2")], model.selection(), 100, 0)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_1_2")])
-model.do()
-model.end()
-assert (len(Fill_1.results()) > 0)
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from GeomAPI import GeomAPI_Pnt
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(50.45430931454487, 141.3050678403047, -211.8625790259634, 141.3050678403047)
-SketchLine_2 = Sketch_1.addLine(-211.8625790259634, 141.3050678403047, -211.8625790259634, -163.3288837233227)
-SketchLine_3 = Sketch_1.addLine(-211.8625790259634, -163.3288837233227, 50.45430931454487, -163.3288837233227)
-SketchLine_4 = Sketch_1.addLine(50.45430931454487, -163.3288837233227, 50.45430931454487, 141.3050678403047)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
-SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
-SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
-SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
-SketchLine_5 = Sketch_1.addLine(246.5736143115653, 48.78197815871301, -51.09047583637312, 48.78197815871301)
-SketchLine_6 = Sketch_1.addLine(-51.09047583637312, 48.78197815871301, -51.09047583637312, -104.8260668928192)
-SketchLine_7 = Sketch_1.addLine(-51.09047583637312, -104.8260668928192, 246.5736143115653, -104.8260668928192)
-SketchLine_8 = Sketch_1.addLine(246.5736143115653, -104.8260668928192, 246.5736143115653, 48.78197815871301)
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
-SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
-SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
-SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
-SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
-SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
-SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
-model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", GeomAPI_Pnt(17.35551764280096, -11.01190794150899, 0))], model.selection(), 100, 0)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", GeomAPI_Pnt(-0.3180832609141306, -28.0220443670531, 50.00000000000001))], [model.selection("FACE", "PartSet/YOZ")])
-model.do()
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-model.end()
-
-from GeomAPI import GeomAPI_Shape
-
-model.testNbResults(Fill_1, 1)
-model.testNbSubResults(Fill_1, [4])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.SOLID, [4])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.FACE, [30])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.EDGE, [132])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.VERTEX, [264])
-model.testResultsVolumes(Fill_1, [11003613.329450136050581932067871094])
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2018-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-from ModelAPI import *
-aSession = ModelAPI_Session.get()
-aDocument = aSession.moduleDocument()
-
-# Create a part
-aSession.startOperation()
-aPartFeature = aDocument.addFeature("Part")
-aSession.finishOperation()
-aPartResult = modelAPI_ResultPart(aPartFeature.firstResult())
-aPart = aPartResult.partDoc()
-
-aSession.startOperation()
-Fill_1 = aPart.addFeature("Fill")
-Fill_1.execute()
-assert(Fill_1.error() != "")
-aSession.finishOperation()
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 50)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_2.addLine(25, 25, 100, 25)
+SketchLine_2 = Sketch_2.addLine(100, 25, 60, 75)
+SketchLine_3 = Sketch_2.addLine(60, 75, 25, 25)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1"), model.selection("COMPOUND", "Sketch_2")], model.selection(), 100, 0)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_1_2")])
+model.do()
+model.end()
+assert (len(Split_1.results()) > 0)
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from GeomAPI import GeomAPI_Pnt
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(50.45430931454487, 141.3050678403047, -211.8625790259634, 141.3050678403047)
+SketchLine_2 = Sketch_1.addLine(-211.8625790259634, 141.3050678403047, -211.8625790259634, -163.3288837233227)
+SketchLine_3 = Sketch_1.addLine(-211.8625790259634, -163.3288837233227, 50.45430931454487, -163.3288837233227)
+SketchLine_4 = Sketch_1.addLine(50.45430931454487, -163.3288837233227, 50.45430931454487, 141.3050678403047)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(246.5736143115653, 48.78197815871301, -51.09047583637312, 48.78197815871301)
+SketchLine_6 = Sketch_1.addLine(-51.09047583637312, 48.78197815871301, -51.09047583637312, -104.8260668928192)
+SketchLine_7 = Sketch_1.addLine(-51.09047583637312, -104.8260668928192, 246.5736143115653, -104.8260668928192)
+SketchLine_8 = Sketch_1.addLine(246.5736143115653, -104.8260668928192, 246.5736143115653, 48.78197815871301)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", GeomAPI_Pnt(17.35551764280096, -11.01190794150899, 0))], model.selection(), 100, 0)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", GeomAPI_Pnt(-0.3180832609141306, -28.0220443670531, 50.00000000000001))], [model.selection("FACE", "PartSet/YOZ")])
+model.do()
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Split_1, 1)
+model.testNbSubResults(Split_1, [4])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [4])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [30])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [132])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [264])
+model.testResultsVolumes(Split_1, [11003613.329450136050581932067871094])
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2018-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from ModelAPI import *
+aSession = ModelAPI_Session.get()
+aDocument = aSession.moduleDocument()
+
+# Create a part
+aSession.startOperation()
+aPartFeature = aDocument.addFeature("Part")
+aSession.finishOperation()
+aPartResult = modelAPI_ResultPart(aPartFeature.firstResult())
+aPart = aPartResult.partDoc()
+
+aSession.startOperation()
+Split_1 = aPart.addFeature("Split")
+Split_1.execute()
+assert(Split_1.error() != "")
+aSession.finishOperation()
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "L", "10")
-model.addParameter(Part_1_doc, "Shift", "5")
-Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
-SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), 5)
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
-model.do()
-Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift", True)
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
-Fill_2 = model.addFill(Part_1_doc, [model.selection("COMPOUND", "Fill_1_1")], [model.selection("SOLID", "Box_1_1")])
-model.do()
-
-model.checkResult(Fill_2, model, 1, [6], [0], [6], [22], [44])
-model.testHaveNamingSubshapes(Fill_2, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2018-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
-SketchLine_1 = SketchProjection_1.createdFeature()
-SketchCircle_1 = Sketch_1.addCircle(11.92861402549826, 0, 16.05621803603458)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_1.center())
-SketchCircle_2 = Sketch_1.addCircle(37.8779560884558, 0, 17.74637067763095)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_2.center())
-model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1_1"), model.selection("SOLID", "Extrusion_1_1_2")], [model.selection("FACE", "PartSet/XOZ")])
-model.do()
-model.end()
-
-from GeomAPI import GeomAPI_Shape
-
-model.testNbResults(Fill_1, 1)
-model.testNbSubResults(Fill_1, [5])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.SOLID, [5])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.FACE, [25])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.EDGE, [90])
-model.testNbSubShapes(Fill_1, GeomAPI_Shape.VERTEX, [180])
-model.testResultsVolumes(Fill_1, [16831.622023411000554915517568588])
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-43.24383164005806, 13.92597968069667, 63.17997097242381, 62.8867924528302)
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_2 = Sketch_2.addLine(-21.12944291883177, 24.09981691608177, 39.13933236574746, 51.82677414066782)
-SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1"), False)
-SketchLine_3 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchLine_3.result())
-SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.result())
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
-Edge_2 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_2")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("EDGE", "Edge_2_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[3],[0],[0],[3],[6])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
-SketchLine_1 = Sketch_1.addLine(-54.08747895500726, -7.310347750362856, 54.27191756168357, 63.68373962264153)
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
-SketchLine_2 = Sketch_2.addLine(-42.46271611030479, 53.71965718432511, 14.83075791001449, -51.73354862119014)
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
-Edge_2 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_2")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("EDGE", "Edge_2_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[2],[0],[0],[2],[4])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
-SketchLine_1 = Sketch_1.addLine(-65.15998142235124, 15.60729985486212, 25.76227082728593, 71.65526357039188)
-SketchLine_2 = Sketch_1.addLine(25.76227082728593, 71.65526357039188, 74.75234281567489, -47.08338548621191)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(74.75234281567489, -47.08338548621191, 13.30716777939044, -81.12733381712628)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchLine_4 = Sketch_1.addLine(13.30716777939044, -81.12733381712628, -65.15998142235124, 15.60729985486212)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
-model.do()
-Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_4")]
-Face_1 = model.addFace(Part_1_doc, Face_1_objects)
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r"))
-SketchLine_5 = Sketch_2.addLine(-53.77011318694006, -47.84888937635935, 60.89888292381829, 36.13719175945)
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_5")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("FACE", "Face_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [3], [0], [0], [3], [6])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchArc_1 = Sketch_1.addArc(28.24683132290313, 24.84281403912743, 0, 50, 56.77054208906745, 0, False)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
-SketchLine_2 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_1.startPoint(), SketchAPI_Line(SketchLine_1).startPoint(), 50)
-SketchArc_2 = Sketch_1.addArc(38.14157263904823, 16.22495851193372, 56.77054208906745, 0, 34.15529753265601, 40.60522496371553, False)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
-SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
-model.do()
-Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchArc_2_2")])
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 70, 0)
-Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, False)
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchLine_3 = Sketch_2.addLine(-64.49168769733997, 17.16789081864163, 146.7677170722727, 22.9901626941168)
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_3")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("SHELL", "Shell_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [3], [0], [0], [3], [6])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Box_1_1/Front"))
-SketchLine_1 = Sketch_1.addLine(4, 10, 7, 0)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), False)
-SketchLine_3 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("SOLID", "Box_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [0], [0], [0], [1], [2])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 5, 10)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Cone_1_1/Face_3"), 5, True)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchLine_1 = Sketch_1.addLine(-8.679188755740876, 4.967059748203267, 8.679188755740878, -4.967059748203268)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_1.result())
-SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 20)
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("SOLID", "Cone_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [3], [0], [0], [3], [6])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Point_2 = model.addPoint(Part_1_doc, 10, 10, 0)
-Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-27.61369370623992, 41.69872643310781, 64.30052615729069, -35.76145957046036)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "Point_1"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchAPI_Point(SketchPoint_1).coordinates())
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
-model.do()
-model.checkResult(Fill_1,model,1,[2],[0],[0],[2],[4])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_1 = Sketch_1.addLine(-67.57764876632801, 2.198838896952097, 88.39332365747461, 44.12336719883891)
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_2 = Sketch_2.addLine(-40.60522496371553, -29.75761973875181, -38.84615384615385, 66.99129172714079)
-SketchLine_3 = Sketch_2.addLine(-38.84615384615385, 66.99129172714079, 50.86647314949202, 73.4412191582003)
-SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchLine_4 = Sketch_2.addLine(50.86647314949202, 73.4412191582003, 55.26415094339622, -34.15529753265602)
-SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_2.addLine(55.26415094339622, -34.15529753265602, -40.60522496371553, -29.75761973875181)
-SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_2.startPoint())
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
-Wire_1_objects = [model.selection("EDGE", "Sketch_2/SketchLine_5"), model.selection("EDGE", "Sketch_2/SketchLine_2"), model.selection("EDGE", "Sketch_2/SketchLine_3"), model.selection("EDGE", "Sketch_2/SketchLine_4")]
-Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("WIRE", "Wire_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [3], [0], [0], [3], [6])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
-SketchLine_1 = Sketch_1.addLine(-65.15998142235124, 15.60729985486212, 25.76227082728593, 71.65526357039188)
-SketchLine_2 = Sketch_1.addLine(25.76227082728593, 71.65526357039188, 74.75234281567489, -47.08338548621191)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(74.75234281567489, -47.08338548621191, 13.30716777939044, -81.12733381712628)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchLine_4 = Sketch_1.addLine(13.30716777939044, -81.12733381712628, -65.15998142235124, 15.60729985486212)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
-model.do()
-Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_4")]
-Face_1 = model.addFace(Part_1_doc, Face_1_objects)
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r"))
-SketchLine_5 = Sketch_2.addLine(-53.77011318694006, -47.84888937635935, 60.89888292381829, 36.13719175945)
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_5")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("EDGE", "Edge_1_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[2],[0],[2],[8],[16])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchArc_1 = Sketch_1.addArc(-31.22351233671988, 15.68505079825835, -49.40058055152394, 17.44412191582002, -17.30100145268062, 27.5029960835475, True)
-SketchLine_1 = Sketch_1.addLine(-17.30100145268062, 27.5029960835475, -6.596516690856308, -20.66908563134978)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
-SketchLine_2 = Sketch_1.addLine(-6.596516690856308, -20.66908563134978, -34.74165457184325, -28.87808417997097)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(-34.74165457184325, -28.87808417997097, -49.40058055152394, 17.44412191582002)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchArc_1_2r-SketchLine_3r-SketchLine_2r-SketchLine_1r"))
-SketchLine_4 = Sketch_2.addLine(-17.59187701681758, -17.53169787967194, -23.97073271029336, 4.338664497959301)
-SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_2"), False)
-SketchLine_5 = SketchProjection_1.createdFeature()
-SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_4.result(), SketchLine_5.result())
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_4")])
-Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchLine_1")]
-Face_1 = model.addFace(Part_1_doc, Face_1_objects)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("EDGE", "Edge_1_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[0],[0],[1],[5],[10])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-27.76647174128943, 72.31029012920524, 42.2686420251427, 59.94944420697596)
-SketchLine_2 = Sketch_1.addLine(42.2686420251427, 59.94944420697596, 59.0507718766223, 21.43074552356853)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(59.0507718766223, 21.43074552356853, 56.1909608273397, -69.919416180974)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchLine_4 = Sketch_1.addLine(56.1909608273397, -69.919416180974, -29.91225626113892, -65.09334567012574)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_1.addLine(-29.91225626113892, -65.09334567012574, -57.18321726979322, -2.500460309588558)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchLine_6 = Sketch_1.addLine(-57.18321726979322, -2.500460309588558, -27.76647174128943, 72.31029012920524)
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_1.startPoint())
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_7 = Sketch_2.addLine(24.33758278426026, -52.48127186534471, 29.40566289183227, 59.45054433956496)
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_7")])
-Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_6"), model.selection("EDGE", "Sketch_1/SketchLine_5"), model.selection("EDGE", "Sketch_1/SketchLine_4"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_2")]
-Face_1 = model.addFace(Part_1_doc, Face_1_objects)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("EDGE", "Edge_1_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[0],[0],[1],[6],[13])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "R", "50")
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
-SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
-SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_4 = Sketch_2.addLine(31.79164821526215, 49.99496405877289, 8.200436015051352, 0)
-SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), False)
-SketchPoint_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
-SketchLine_5 = Sketch_2.addLine(8.200436015051352, 0, 27.24680168984479, -49.85269382803262)
-SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1"), False)
-SketchPoint_2 = SketchProjection_3.createdFeature()
-SketchArc_2 = Sketch_2.addArc(31.08202242513997, 1.147024884467139e-21, 27.24680168984479, -49.85269382803262, 31.79164821526215, 49.99496405877289, False)
-SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchArc_2.center())
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchArc_2.startPoint())
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
-SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], "R")
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchArc_1_2f_wire")])
-Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchArc_2_2f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Face_2_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [2], [0], [2], [6], [12])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "D", "50")
-model.addParameter(Part_1_doc, "L", "30")
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
-SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
-SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
-SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
-SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
-SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
-SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
-SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
-SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
-SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
-SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_2.createdFeature()
-SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
-SketchLine_7.setName("SketchLine_8")
-SketchLine_7.result().setName("SketchLine_8")
-SketchLine_7.setAuxiliary(True)
-SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
-SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
-SketchLine_8 = Sketch_2.addLine(57.5, 0, 65, -10.81485284151855)
-SketchLine_8.setName("SketchLine_9")
-SketchLine_8.result().setName("SketchLine_9")
-SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_9 = SketchProjection_3.createdFeature()
-SketchLine_9.setName("SketchLine_10")
-SketchLine_9.result().setName("SketchLine_10")
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
-SketchLine_10 = Sketch_2.addLine(65, -10.81485284151855, 65, 11.50710132369052)
-SketchLine_10.setName("SketchLine_11")
-SketchLine_10.result().setName("SketchLine_11")
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
-SketchLine_11 = Sketch_2.addLine(65, 11.50710132369052, 50, 11.50710132369052)
-SketchLine_11.setName("SketchLine_12")
-SketchLine_11.result().setName("SketchLine_12")
-SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
-SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_7.result())
-SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_8.startPoint(), SketchLine_7.result(), "L/4", True)
-SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L/2", True)
-SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_10.endPoint(), SketchLine_7.result(), "L/2", True)
-SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_11.result())
-SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_10.result(), SketchLine_11.result()]
-SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
-[SketchLine_12, SketchLine_13, SketchLine_14] = SketchConstraintMirror_1.mirrored()
-SketchLine_14.setName("SketchLine_15")
-SketchLine_14.result().setName("SketchLine_15")
-SketchLine_13.setName("SketchLine_14")
-SketchLine_13.result().setName("SketchLine_14")
-SketchLine_12.setName("SketchLine_13")
-SketchLine_12.result().setName("SketchLine_13")
-SketchLine_15 = Sketch_2.addLine(42.5, 0, 57.5, 0)
-SketchLine_15.setName("SketchLine_16")
-SketchLine_15.result().setName("SketchLine_16")
-SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_15.startPoint())
-SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_8.startPoint())
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
-Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
-Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
-Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_15r-SketchLine_14r-SketchLine_13r-SketchLine_16f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_3_1")], [model.selection("SHELL", "Shell_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [3], [0], [3], [14], [28])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "L", "10")
-model.addParameter(Part_1_doc, "Shift", "5")
-Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
-SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), 5)
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("SOLID", "Box_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [4], [0], [4], [15], [30])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Point_2 = model.addPoint(Part_1_doc, 22, 33, 0)
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(80.77068214804063, 60.54136429608128, -35.9143686502177, 60.54136429608128)
-SketchLine_2 = Sketch_1.addLine(-35.9143686502177, 60.54136429608128, -35.9143686502177, -37.67343976777939)
-SketchLine_3 = Sketch_1.addLine(-35.9143686502177, -37.67343976777939, 80.77068214804063, -37.67343976777939)
-SketchLine_4 = Sketch_1.addLine(80.77068214804063, -37.67343976777939, 80.77068214804063, 60.54136429608128)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
-SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
-SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
-SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
-model.do()
-Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_4"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_2")]
-Face_1 = model.addFace(Part_1_doc, Face_1_objects)
-Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[0],[0],[1],[4],[9])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "R", "50")
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
-SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
-SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_4 = Sketch_2.addLine(-42.38833891077762, 73.71572760627062, -18.23994072168525, 7.835320880296757)
-SketchLine_5 = Sketch_2.addLine(-18.23994072168525, 7.835320880296757, 13.89341696052619, 27.33089138697832)
-SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchLine_6 = Sketch_2.addLine(13.89341696052619, 27.33089138697832, 39.39985877388298, 9.747860956493145)
-SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
-SketchLine_7 = Sketch_2.addLine(39.39985877388298, 9.747860956493145, 38.20105433548567, 71.93732104572751)
-SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
-SketchLine_8 = Sketch_2.addLine(38.20105433548567, 71.93732104572751, -42.38833891077762, 73.71572760627062)
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_8.endPoint())
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchArc_1_2f_wire")])
-Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("WIRE", "Wire_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [5], [0], [5], [21], [42])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchArc_1 = Sketch_1.addArc(28.24683132290313, 24.84281403912743, 0, 50, 56.77054208906745, 0, False)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
-SketchLine_2 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_1.startPoint(), SketchAPI_Line(SketchLine_1).startPoint(), 50)
-SketchArc_2 = Sketch_1.addArc(38.14157263904823, 16.22495851193372, 56.77054208906745, 0, 34.15529753265601, 40.60522496371553, False)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
-SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
-model.do()
-Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchArc_2_2")])
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 70, 0)
-Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("FACE", "PartSet/XOZ")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[0],[0],[3],[12],[24])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchArc_1 = Sketch_1.addArc(28.24683132290313, 24.84281403912743, 0, 50, 56.77054208906745, 0, False)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
-SketchLine_2 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_1.startPoint(), SketchAPI_Line(SketchLine_1).startPoint(), 50)
-SketchArc_2 = Sketch_1.addArc(38.14157263904823, 16.22495851193372, 56.77054208906745, 0, 34.15529753265601, 40.60522496371553, False)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
-SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
-model.do()
-Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchArc_2_2")])
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 70, 0)
-Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, False)
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchLine_3 = Sketch_2.addLine(-64.49168769733997, 17.16789081864163, 146.7677170722727, 22.9901626941168)
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_3")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("EDGE", "Edge_1_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[0],[0],[2],[8],[18])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "D", "50")
-model.addParameter(Part_1_doc, "L", "30")
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-6, 29.93619865618197, 18, 47.93619865618197)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchLine_3 = Sketch_1.addLine(18, 47.93619865618197, 0, 71.93619865618197)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
-SketchLine_4 = Sketch_1.addLine(0, 71.93619865618197, -24, 53.93619865618197)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_1.addLine(-24, 53.93619865618197, -6, 29.93619865618197)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
-SketchLine_6 = Sketch_1.addLine(-24, 53.93619865618197, 18, 47.93619865618197)
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
-SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
-SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
-SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
-SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
-SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
-SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
-SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_2.result(), "L/5", True)
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_2.createdFeature()
-SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
-SketchLine_7.setName("SketchLine_8")
-SketchLine_7.result().setName("SketchLine_8")
-SketchLine_7.setAuxiliary(True)
-SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
-SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
-SketchLine_8 = Sketch_2.addLine(50, -3.170182618622045, 80, -14.17077918941143)
-SketchLine_8.setName("SketchLine_9")
-SketchLine_8.result().setName("SketchLine_9")
-SketchLine_9 = Sketch_2.addLine(80, -14.17077918941143, 64.99999999999999, 12.18920647716607)
-SketchLine_9.setName("SketchLine_11")
-SketchLine_9.result().setName("SketchLine_11")
-SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
-SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
-SketchLine_10 = Sketch_2.addLine(64.99999999999999, 12.18920647716607, 50, 12.18920647716607)
-SketchLine_10.setName("SketchLine_12")
-SketchLine_10.result().setName("SketchLine_12")
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
-SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
-SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
-SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L", True)
-SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_9.endPoint(), SketchLine_7.result(), "L/2", True)
-SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_10.result())
-SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_9.result(), SketchLine_10.result()]
-SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
-[SketchLine_11, SketchLine_12, SketchLine_13] = SketchConstraintMirror_1.mirrored()
-SketchLine_13.setName("SketchLine_15")
-SketchLine_13.result().setName("SketchLine_15")
-SketchLine_12.setName("SketchLine_14")
-SketchLine_12.result().setName("SketchLine_14")
-SketchLine_11.setName("SketchLine_13")
-SketchLine_11.result().setName("SketchLine_13")
-SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_3_EndVertex"), False)
-SketchPoint_2 = SketchProjection_3.createdFeature()
-SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_9.result())
-SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
-SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_7.result())
-SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
-Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
-Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
-Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_15r-SketchLine_14r-SketchLine_13r_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("FACE", "Face_3_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [0], [0], [4], [13], [26])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "D", "50")
-model.addParameter(Part_1_doc, "L", "30")
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-10, 32.04672553984553, 15.61552812808831, 47.66225366793383)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchLine_3 = Sketch_1.addLine(15.61552812808831, 47.66225366793383, -4.988916520257207e-21, 73.27778179602213)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
-SketchLine_4 = Sketch_1.addLine(-4.988916520257207e-21, 73.27778179602213, -25.61552812810082, 57.66225366792627)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_1.addLine(-25.61552812810082, 57.66225366792627, -10, 32.04672553984553)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
-SketchLine_6 = Sketch_1.addLine(-25.61552812810082, 57.66225366792627, 15.61552812808831, 47.66225366793383)
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
-SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
-SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
-SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
-SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
-SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
-SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
-SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_2.result(), "L/3", True)
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_7 = Sketch_2.addLine(50, 15.56025031353752, 50, -15.54016280334104)
-SketchLine_8 = Sketch_2.addLine(50, -15.54016280334104, 36.52981427174974, 0)
-SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
-SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_9 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.result())
-SketchLine_10 = Sketch_2.addLine(36.52981427174974, 0, 50, 15.56025031353752)
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
-SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_10.endPoint())
-SketchLine_11 = Sketch_2.addLine(50, 15.56025031353752, 73.27778179602213, 0)
-SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_11.startPoint())
-SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_3_EndVertex"), False)
-SketchPoint_1 = SketchProjection_3.createdFeature()
-SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
-SketchLine_12 = Sketch_2.addLine(73.27778179602213, 0, 50, -15.54016280334104)
-SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
-SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_12.endPoint())
-SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_9).startPoint(), SketchLine_7.result(), "D", True)
-SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
-Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
-Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_10r-SketchLine_8r-SketchLine_7r_wire")])
-Face_4 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_7r-SketchLine_12r-SketchLine_11r_wire")])
-Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
-Shell_2 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_4_1")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("SHELL", "Shell_2_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [0], [0], [4], [15], [30])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "L", "10")
-model.addParameter(Part_1_doc, "Shift", "5")
-Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
-SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), 5)
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
-model.do()
-Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift", True)
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
-Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Fill_1_1_2"), model.selection("FACE", "Fill_1_1_1")])
-Fill_2 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("SOLID", "Box_1_1")])
-model.do()
-
-model.checkResult(Fill_2, model, 1, [0], [0], [6], [22], [44])
-model.testHaveNamingSubshapes(Fill_2, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchArc_1 = Sketch_1.addArc(9.761379814097372, -58.25586643592183, 0, 0, -48.40807467084933, -47.99209154562215, False)
-SketchArc_2 = Sketch_1.addArc(-12.6706171814691, -54.29782746957817, -48.40807467084933, -47.99209154562215, 12.46009047944227, -80.47750863283412, False)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
-SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchAPI_Point(SketchPoint_1).coordinates())
-model.do()
-Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchArc_2_2")])
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 50, 0)
-Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
-Point_2 = model.addPoint(Part_1_doc, 0, 0, 10)
-Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[0],[0],[2],[9],[18])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "D", "50")
-model.addParameter(Part_1_doc, "L", "30")
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
-SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
-SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
-SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
-SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
-SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
-SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
-SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
-SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
-SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
-SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_7 = Sketch_2.addLine(-14.33356820392057, 60, 15.66643179607943, 60)
-SketchLine_8 = Sketch_2.addLine(15.66643179607943, 60, 15.66643179607943, 30)
-SketchLine_9 = Sketch_2.addLine(15.66643179607943, 30, -14.33356820392057, 30)
-SketchLine_10 = Sketch_2.addLine(-14.33356820392057, 30, -14.33356820392057, 60)
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_7.startPoint())
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
-SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
-SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
-SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_7.result())
-SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_8.result())
-SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_9.result())
-SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_10.result())
-SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_9.result(), "L")
-SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_8.result(), "L")
-SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_2.createdFeature()
-SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.result(), "L", True)
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
-Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
-Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
-Wire_1_objects = [model.selection("EDGE", "Sketch_2/SketchLine_7"), model.selection("EDGE", "Sketch_2/SketchLine_8"), model.selection("EDGE", "Sketch_2/SketchLine_9"), model.selection("EDGE", "Sketch_2/SketchLine_10")]
-Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("WIRE", "Wire_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [0], [0], [8], [30], [60])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 5, 10)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Cone_1_1")], [model.selection("FACE", "PartSet/YOZ"), model.selection("FACE", "PartSet/XOZ")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[4],[4],[20],[72],[144])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "L", "10")
-model.addParameter(Part_1_doc, "Shift", "12")
-Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "L/2", True)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchArc_1 = Sketch_1.addArc(0, 0, 15.49193338482974, -4, 0, -16, True)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
-SketchLine_2 = Sketch_1.addLine(15.49193338482974, -4, 0, 12)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(0, 12, 0, -16)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), "Shift/3")
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
-model.do()
-Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift/3", True)
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
-Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("COMPOUND", "Fill_1_1")])
-model.do()
-
-model.checkResult(Fill_2, model, 1, [2], [2], [14], [60], [120])
-model.testHaveNamingSubshapes(Fill_2, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "L", "10")
-model.addParameter(Part_1_doc, "Shift", "12")
-Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "L/2", True)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchArc_1 = Sketch_1.addArc(0, 0, 15.49193338482974, -4, 0, -16, True)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
-SketchLine_2 = Sketch_1.addLine(15.49193338482974, -4, 0, 12)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(0, 12, 0, -16)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), "Shift/3")
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
-model.do()
-Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift/3", True)
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
-Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Fill_1_1_2"), model.selection("FACE", "Fill_1_1_1")])
-LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], model.selection("EDGE", "PartSet/OZ"), 1, 3)
-Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("COMPOUND", "LinearCopy_1_1")])
-model.do()
-
-model.checkResult(Fill_2, model, 1, [4], [4], [30], [132], [264])
-model.testHaveNamingSubshapes(Fill_2, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Box_1_1/Front"))
-SketchLine_1 = Sketch_1.addLine(4, 10, 7, 0)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), False)
-SketchLine_3 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("EDGE", "Edge_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [0], [1], [7], [30], [60])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "L", "10")
-model.addParameter(Part_1_doc, "Shift", "12")
-Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "L/2", True)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchArc_1 = Sketch_1.addArc(0, 0, 15.49193338482974, -4, 0, -16, True)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
-SketchLine_2 = Sketch_1.addLine(15.49193338482974, -4, 0, 12)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(0, 12, 0, -16)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), "Shift/3")
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("FACE", "Face_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [2], [2], [12], [48], [96])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "L", "10")
-model.addParameter(Part_1_doc, "Shift", "12")
-Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "L/2", True)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchArc_1 = Sketch_1.addArc(0, 0, 15.49193338482974, -4, 0, -16, True)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
-SketchLine_2 = Sketch_1.addLine(15.49193338482974, -4, 0, 12)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(0, 12, 0, -16)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), "Shift/3")
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
-model.do()
-Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift/3", True)
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
-Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Fill_1_1_2"), model.selection("FACE", "Fill_1_1_1")])
-Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("SHELL", "Shell_1_1")])
-model.do()
-
-model.checkResult(Fill_2, model, 1, [2], [2], [14], [60], [120])
-model.testHaveNamingSubshapes(Fill_2, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_1 = Sketch_1.addLine(-67.57764876632801, 2.198838896952097, 88.39332365747461, 44.12336719883891)
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_2 = Sketch_2.addLine(-40.60522496371553, -29.75761973875181, -38.84615384615385, 66.99129172714079)
-SketchLine_3 = Sketch_2.addLine(-38.84615384615385, 66.99129172714079, 50.86647314949202, 73.4412191582003)
-SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchLine_4 = Sketch_2.addLine(50.86647314949202, 73.4412191582003, 55.26415094339622, -34.15529753265602)
-SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_2.addLine(55.26415094339622, -34.15529753265602, -40.60522496371553, -29.75761973875181)
-SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_2.startPoint())
-model.do()
-Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
-Wire_1_objects = [model.selection("EDGE", "Sketch_2/SketchLine_5"), model.selection("EDGE", "Sketch_2/SketchLine_2"), model.selection("EDGE", "Sketch_2/SketchLine_3"), model.selection("EDGE", "Sketch_2/SketchLine_4")]
-Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("EDGE", "Edge_1_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[0],[0],[0],[6],[12])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "R", "50")
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
-SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
-SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_4 = Sketch_2.addLine(29.74624907439609, 30.07487215963349, 31.08202242513997, 0)
-SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1"), False)
-SketchPoint_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
-SketchLine_5 = Sketch_2.addLine(31.08202242513997, 0, 45.45797599933665, 0)
-SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_6 = SketchProjection_3.createdFeature()
-SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
-SketchLine_7 = Sketch_2.addLine(45.45797599933665, 0, 45.83553599350717, -22.747645239555)
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
-SketchLine_8 = Sketch_2.addLine(45.83553599350717, -22.747645239555, 70.40999925541598, 30.039147749218)
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
-SketchLine_9 = Sketch_2.addLine(70.40999925541598, 30.039147749218, 29.74624907439609, 30.07487215963349)
-SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
-SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.endPoint())
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchArc_1_2f_wire")])
-Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchLine_7f-SketchLine_8f-SketchLine_9f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("FACE", "Face_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [0], [0], [0], [6], [12])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "D", "50")
-model.addParameter(Part_1_doc, "L", "30")
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
-SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
-SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
-SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
-SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
-SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
-SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
-SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
-SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
-SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
-SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_2.createdFeature()
-SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
-SketchLine_7.setName("SketchLine_8")
-SketchLine_7.result().setName("SketchLine_8")
-SketchLine_7.setAuxiliary(True)
-SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
-SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
-SketchLine_8 = Sketch_2.addLine(57.5, 0, 65, -10.81485284151855)
-SketchLine_8.setName("SketchLine_9")
-SketchLine_8.result().setName("SketchLine_9")
-SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_9 = SketchProjection_3.createdFeature()
-SketchLine_9.setName("SketchLine_10")
-SketchLine_9.result().setName("SketchLine_10")
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
-SketchLine_10 = Sketch_2.addLine(65, -10.81485284151855, 65, 11.50710132369052)
-SketchLine_10.setName("SketchLine_11")
-SketchLine_10.result().setName("SketchLine_11")
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
-SketchLine_11 = Sketch_2.addLine(65, 11.50710132369052, 50, 11.50710132369052)
-SketchLine_11.setName("SketchLine_12")
-SketchLine_11.result().setName("SketchLine_12")
-SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
-SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_7.result())
-SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_8.startPoint(), SketchLine_7.result(), "L/4", True)
-SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L/2", True)
-SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_10.endPoint(), SketchLine_7.result(), "L/2", True)
-SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_11.result())
-SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_10.result(), SketchLine_11.result()]
-SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
-[SketchLine_12, SketchLine_13, SketchLine_14] = SketchConstraintMirror_1.mirrored()
-SketchLine_14.setName("SketchLine_15")
-SketchLine_14.result().setName("SketchLine_15")
-SketchLine_13.setName("SketchLine_14")
-SketchLine_13.result().setName("SketchLine_14")
-SketchLine_12.setName("SketchLine_13")
-SketchLine_12.result().setName("SketchLine_13")
-SketchLine_15 = Sketch_2.addLine(42.5, 0, 57.5, 0)
-SketchLine_15.setName("SketchLine_16")
-SketchLine_15.result().setName("SketchLine_16")
-SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_15.startPoint())
-SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_8.startPoint())
-model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
-Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
-Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
-Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_15r-SketchLine_14r-SketchLine_13r-SketchLine_16f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("SHELL", "Shell_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [0], [0], [0], [10], [20])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "L", "10")
-model.addParameter(Part_1_doc, "Shift", "5")
-Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
-Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
-SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
-SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
-SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), 5)
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
-model.do()
-Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("SOLID", "Box_1_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [0], [0], [0], [9], [18])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Point_2 = model.addPoint(Part_1_doc, 10, 10, 0)
-Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-27.43492861072797, 41.55044273324706, 64.29883100829633, -35.76346801736826)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "Point_1"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchAPI_Point(SketchPoint_1).coordinates())
-SketchLine_2 = Sketch_1.addLine(64.5972559141328, -34.82170453629492, 63.39686648861513, 69.37209759863701)
-SketchLine_3 = Sketch_1.addLine(63.39686648861513, 69.37209759863701, -27.43492861072797, 41.55044273324706)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_1.result())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
-model.do()
-Wire_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3")]
-Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
-Fill_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
-model.do()
-
-model.checkResult(Fill_1,model,1,[0],[0],[0],[4],[8])
-model.testHaveNamingSubshapes(Fill_1,model,Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
+++ /dev/null
-# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# -*- coding: utf-8 -*-
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "R", "50")
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
-SketchLine_2 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
-SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
-SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
-model.do()
-Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_4 = Sketch_2.addLine(31.79164821526215, 49.99496405877289, 8.200436015051352, 0)
-SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), False)
-SketchPoint_1 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
-SketchLine_5 = Sketch_2.addLine(8.200436015051352, 0, 27.24680168984479, -49.85269382803262)
-SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1"), False)
-SketchPoint_2 = SketchProjection_3.createdFeature()
-SketchArc_2 = Sketch_2.addArc(31.08202242513997, 1.147024884467139e-21, 27.24680168984479, -49.85269382803262, 31.79164821526215, 49.99496405877289, False)
-SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchArc_2.center())
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchArc_2.startPoint())
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
-SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], "R")
-model.do()
-Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchArc_1_2f_wire")])
-Wire_2 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchArc_2_2f_wire")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("WIRE", "Wire_2_1")])
-model.do()
-
-model.checkResult(Fill_1, model, 1, [0], [0], [0], [4], [8])
-model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
-
-model.end()
-
-assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Box_1_1/Front"))
+SketchLine_1 = Sketch_1.addLine(4, 10, 7, 0)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), False)
+SketchLine_3 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [0], [1], [7], [30], [60])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), 5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Split_2 = model.addSplit(Part_1_doc, [model.selection("COMPOUND", "Split_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkResult(Split_2, model, 1, [6], [0], [6], [22], [44])
+model.testHaveNamingSubshapes(Split_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2018-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(11.92861402549826, 0, 16.05621803603458)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_1.center())
+SketchCircle_2 = Sketch_1.addCircle(37.8779560884558, 0, 17.74637067763095)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_2.center())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1_1"), model.selection("SOLID", "Extrusion_1_1_2")], [model.selection("FACE", "PartSet/XOZ")])
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Split_1, 1)
+model.testNbSubResults(Split_1, [5])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [5])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [25])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [90])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [180])
+model.testResultsVolumes(Split_1, [16831.622023411000554915517568588])
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-43.24383164005806, 13.92597968069667, 63.17997097242381, 62.8867924528302)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_2 = Sketch_2.addLine(-21.12944291883177, 24.09981691608177, 39.13933236574746, 51.82677414066782)
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1"), False)
+SketchLine_3 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchLine_3.result())
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
+Edge_2 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_2")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("EDGE", "Edge_2_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[3],[0],[0],[3],[6])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(-54.08747895500726, -7.310347750362856, 54.27191756168357, 63.68373962264153)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_2 = Sketch_2.addLine(-42.46271611030479, 53.71965718432511, 14.83075791001449, -51.73354862119014)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
+Edge_2 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_2")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("EDGE", "Edge_2_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[2],[0],[0],[2],[4])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(-65.15998142235124, 15.60729985486212, 25.76227082728593, 71.65526357039188)
+SketchLine_2 = Sketch_1.addLine(25.76227082728593, 71.65526357039188, 74.75234281567489, -47.08338548621191)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(74.75234281567489, -47.08338548621191, 13.30716777939044, -81.12733381712628)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(13.30716777939044, -81.12733381712628, -65.15998142235124, 15.60729985486212)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+model.do()
+Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_4")]
+Face_1 = model.addFace(Part_1_doc, Face_1_objects)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r"))
+SketchLine_5 = Sketch_2.addLine(-53.77011318694006, -47.84888937635935, 60.89888292381829, 36.13719175945)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_5")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("FACE", "Face_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [3], [0], [0], [3], [6])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchArc_1 = Sketch_1.addArc(28.24683132290313, 24.84281403912743, 0, 50, 56.77054208906745, 0, False)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_1.startPoint(), SketchAPI_Line(SketchLine_1).startPoint(), 50)
+SketchArc_2 = Sketch_1.addArc(38.14157263904823, 16.22495851193372, 56.77054208906745, 0, 34.15529753265601, 40.60522496371553, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchArc_2_2")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 70, 0)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, False)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_3 = Sketch_2.addLine(-64.49168769733997, 17.16789081864163, 146.7677170722727, 22.9901626941168)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_3")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("SHELL", "Shell_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [3], [0], [0], [3], [6])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Box_1_1/Front"))
+SketchLine_1 = Sketch_1.addLine(4, 10, 7, 0)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), False)
+SketchLine_3 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [0], [0], [0], [1], [2])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 5, 10)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Cone_1_1/Face_3"), 5, True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_1 = Sketch_1.addLine(-8.679188755740876, 4.967059748203267, 8.679188755740878, -4.967059748203268)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_1.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 20)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("SOLID", "Cone_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [3], [0], [0], [3], [6])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_2 = model.addPoint(Part_1_doc, 10, 10, 0)
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-27.61369370623992, 41.69872643310781, 64.30052615729069, -35.76145957046036)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "Point_1"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchAPI_Point(SketchPoint_1).coordinates())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
+model.do()
+model.checkResult(Split_1,model,1,[2],[0],[0],[2],[4])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(-67.57764876632801, 2.198838896952097, 88.39332365747461, 44.12336719883891)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_2 = Sketch_2.addLine(-40.60522496371553, -29.75761973875181, -38.84615384615385, 66.99129172714079)
+SketchLine_3 = Sketch_2.addLine(-38.84615384615385, 66.99129172714079, 50.86647314949202, 73.4412191582003)
+SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_2.addLine(50.86647314949202, 73.4412191582003, 55.26415094339622, -34.15529753265602)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_2.addLine(55.26415094339622, -34.15529753265602, -40.60522496371553, -29.75761973875181)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_2.startPoint())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
+Wire_1_objects = [model.selection("EDGE", "Sketch_2/SketchLine_5"), model.selection("EDGE", "Sketch_2/SketchLine_2"), model.selection("EDGE", "Sketch_2/SketchLine_3"), model.selection("EDGE", "Sketch_2/SketchLine_4")]
+Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("WIRE", "Wire_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [3], [0], [0], [3], [6])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(-65.15998142235124, 15.60729985486212, 25.76227082728593, 71.65526357039188)
+SketchLine_2 = Sketch_1.addLine(25.76227082728593, 71.65526357039188, 74.75234281567489, -47.08338548621191)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(74.75234281567489, -47.08338548621191, 13.30716777939044, -81.12733381712628)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(13.30716777939044, -81.12733381712628, -65.15998142235124, 15.60729985486212)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+model.do()
+Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_4")]
+Face_1 = model.addFace(Part_1_doc, Face_1_objects)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r"))
+SketchLine_5 = Sketch_2.addLine(-53.77011318694006, -47.84888937635935, 60.89888292381829, 36.13719175945)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_5")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[2],[0],[2],[8],[16])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchArc_1 = Sketch_1.addArc(-31.22351233671988, 15.68505079825835, -49.40058055152394, 17.44412191582002, -17.30100145268062, 27.5029960835475, True)
+SketchLine_1 = Sketch_1.addLine(-17.30100145268062, 27.5029960835475, -6.596516690856308, -20.66908563134978)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
+SketchLine_2 = Sketch_1.addLine(-6.596516690856308, -20.66908563134978, -34.74165457184325, -28.87808417997097)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-34.74165457184325, -28.87808417997097, -49.40058055152394, 17.44412191582002)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchArc_1_2r-SketchLine_3r-SketchLine_2r-SketchLine_1r"))
+SketchLine_4 = Sketch_2.addLine(-17.59187701681758, -17.53169787967194, -23.97073271029336, 4.338664497959301)
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_2"), False)
+SketchLine_5 = SketchProjection_1.createdFeature()
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_4.result(), SketchLine_5.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_4")])
+Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchLine_1")]
+Face_1 = model.addFace(Part_1_doc, Face_1_objects)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[0],[0],[1],[5],[10])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-27.76647174128943, 72.31029012920524, 42.2686420251427, 59.94944420697596)
+SketchLine_2 = Sketch_1.addLine(42.2686420251427, 59.94944420697596, 59.0507718766223, 21.43074552356853)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(59.0507718766223, 21.43074552356853, 56.1909608273397, -69.919416180974)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(56.1909608273397, -69.919416180974, -29.91225626113892, -65.09334567012574)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-29.91225626113892, -65.09334567012574, -57.18321726979322, -2.500460309588558)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(-57.18321726979322, -2.500460309588558, -27.76647174128943, 72.31029012920524)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_1.startPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_7 = Sketch_2.addLine(24.33758278426026, -52.48127186534471, 29.40566289183227, 59.45054433956496)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_7")])
+Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_6"), model.selection("EDGE", "Sketch_1/SketchLine_5"), model.selection("EDGE", "Sketch_1/SketchLine_4"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_2")]
+Face_1 = model.addFace(Part_1_doc, Face_1_objects)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[0],[0],[1],[6],[13])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "R", "50")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_4 = Sketch_2.addLine(31.79164821526215, 49.99496405877289, 8.200436015051352, 0)
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
+SketchLine_5 = Sketch_2.addLine(8.200436015051352, 0, 27.24680168984479, -49.85269382803262)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1"), False)
+SketchPoint_2 = SketchProjection_3.createdFeature()
+SketchArc_2 = Sketch_2.addArc(31.08202242513997, 1.147024884467139e-21, 27.24680168984479, -49.85269382803262, 31.79164821526215, 49.99496405877289, False)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchArc_2.center())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], "R")
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchArc_1_2f_wire")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchArc_2_2f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Face_2_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [2], [0], [2], [6], [12])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
+SketchLine_7.setName("SketchLine_8")
+SketchLine_7.result().setName("SketchLine_8")
+SketchLine_7.setAuxiliary(True)
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
+SketchLine_8 = Sketch_2.addLine(57.5, 0, 65, -10.81485284151855)
+SketchLine_8.setName("SketchLine_9")
+SketchLine_8.result().setName("SketchLine_9")
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_9 = SketchProjection_3.createdFeature()
+SketchLine_9.setName("SketchLine_10")
+SketchLine_9.result().setName("SketchLine_10")
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(65, -10.81485284151855, 65, 11.50710132369052)
+SketchLine_10.setName("SketchLine_11")
+SketchLine_10.result().setName("SketchLine_11")
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
+SketchLine_11 = Sketch_2.addLine(65, 11.50710132369052, 50, 11.50710132369052)
+SketchLine_11.setName("SketchLine_12")
+SketchLine_11.result().setName("SketchLine_12")
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_7.result())
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_8.startPoint(), SketchLine_7.result(), "L/4", True)
+SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_10.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_10.result(), SketchLine_11.result()]
+SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
+[SketchLine_12, SketchLine_13, SketchLine_14] = SketchConstraintMirror_1.mirrored()
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchLine_13.setName("SketchLine_14")
+SketchLine_13.result().setName("SketchLine_14")
+SketchLine_12.setName("SketchLine_13")
+SketchLine_12.result().setName("SketchLine_13")
+SketchLine_15 = Sketch_2.addLine(42.5, 0, 57.5, 0)
+SketchLine_15.setName("SketchLine_16")
+SketchLine_15.result().setName("SketchLine_16")
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_8.startPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_15r-SketchLine_14r-SketchLine_13r-SketchLine_16f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_3_1")], [model.selection("SHELL", "Shell_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [3], [0], [3], [14], [28])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), 5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [4], [0], [4], [15], [30])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_2 = model.addPoint(Part_1_doc, 22, 33, 0)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(80.77068214804063, 60.54136429608128, -35.9143686502177, 60.54136429608128)
+SketchLine_2 = Sketch_1.addLine(-35.9143686502177, 60.54136429608128, -35.9143686502177, -37.67343976777939)
+SketchLine_3 = Sketch_1.addLine(-35.9143686502177, -37.67343976777939, 80.77068214804063, -37.67343976777939)
+SketchLine_4 = Sketch_1.addLine(80.77068214804063, -37.67343976777939, 80.77068214804063, 60.54136429608128)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+model.do()
+Face_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_4"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_2")]
+Face_1 = model.addFace(Part_1_doc, Face_1_objects)
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[0],[0],[1],[4],[9])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "R", "50")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_4 = Sketch_2.addLine(-42.38833891077762, 73.71572760627062, -18.23994072168525, 7.835320880296757)
+SketchLine_5 = Sketch_2.addLine(-18.23994072168525, 7.835320880296757, 13.89341696052619, 27.33089138697832)
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_2.addLine(13.89341696052619, 27.33089138697832, 39.39985877388298, 9.747860956493145)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_2.addLine(39.39985877388298, 9.747860956493145, 38.20105433548567, 71.93732104572751)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(38.20105433548567, 71.93732104572751, -42.38833891077762, 73.71572760627062)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_8.endPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchArc_1_2f_wire")])
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("WIRE", "Wire_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [5], [0], [5], [21], [42])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchArc_1 = Sketch_1.addArc(28.24683132290313, 24.84281403912743, 0, 50, 56.77054208906745, 0, False)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_1.startPoint(), SketchAPI_Line(SketchLine_1).startPoint(), 50)
+SketchArc_2 = Sketch_1.addArc(38.14157263904823, 16.22495851193372, 56.77054208906745, 0, 34.15529753265601, 40.60522496371553, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchArc_2_2")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 70, 0)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("FACE", "PartSet/XOZ")])
+model.do()
+
+model.checkResult(Split_1,model,1,[0],[0],[3],[12],[24])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchArc_1 = Sketch_1.addArc(28.24683132290313, 24.84281403912743, 0, 50, 56.77054208906745, 0, False)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_1.startPoint(), SketchAPI_Line(SketchLine_1).startPoint(), 50)
+SketchArc_2 = Sketch_1.addArc(38.14157263904823, 16.22495851193372, 56.77054208906745, 0, 34.15529753265601, 40.60522496371553, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchArc_2_2")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 70, 0)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, False)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_3 = Sketch_2.addLine(-64.49168769733997, 17.16789081864163, 146.7677170722727, 22.9901626941168)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_3")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[0],[0],[2],[8],[18])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-6, 29.93619865618197, 18, 47.93619865618197)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchLine_3 = Sketch_1.addLine(18, 47.93619865618197, 0, 71.93619865618197)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(0, 71.93619865618197, -24, 53.93619865618197)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-24, 53.93619865618197, -6, 29.93619865618197)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-24, 53.93619865618197, 18, 47.93619865618197)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_2.result(), "L/5", True)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
+SketchLine_7.setName("SketchLine_8")
+SketchLine_7.result().setName("SketchLine_8")
+SketchLine_7.setAuxiliary(True)
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
+SketchLine_8 = Sketch_2.addLine(50, -3.170182618622045, 80, -14.17077918941143)
+SketchLine_8.setName("SketchLine_9")
+SketchLine_8.result().setName("SketchLine_9")
+SketchLine_9 = Sketch_2.addLine(80, -14.17077918941143, 64.99999999999999, 12.18920647716607)
+SketchLine_9.setName("SketchLine_11")
+SketchLine_9.result().setName("SketchLine_11")
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
+SketchLine_10 = Sketch_2.addLine(64.99999999999999, 12.18920647716607, 50, 12.18920647716607)
+SketchLine_10.setName("SketchLine_12")
+SketchLine_10.result().setName("SketchLine_12")
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
+SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
+SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L", True)
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_9.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_10.result())
+SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_9.result(), SketchLine_10.result()]
+SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
+[SketchLine_11, SketchLine_12, SketchLine_13] = SketchConstraintMirror_1.mirrored()
+SketchLine_13.setName("SketchLine_15")
+SketchLine_13.result().setName("SketchLine_15")
+SketchLine_12.setName("SketchLine_14")
+SketchLine_12.result().setName("SketchLine_14")
+SketchLine_11.setName("SketchLine_13")
+SketchLine_11.result().setName("SketchLine_13")
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_3_EndVertex"), False)
+SketchPoint_2 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_9.result())
+SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_7.result())
+SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_15r-SketchLine_14r-SketchLine_13r_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("FACE", "Face_3_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [0], [0], [4], [13], [26])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-10, 32.04672553984553, 15.61552812808831, 47.66225366793383)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchLine_3 = Sketch_1.addLine(15.61552812808831, 47.66225366793383, -4.988916520257207e-21, 73.27778179602213)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(-4.988916520257207e-21, 73.27778179602213, -25.61552812810082, 57.66225366792627)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-25.61552812810082, 57.66225366792627, -10, 32.04672553984553)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-25.61552812810082, 57.66225366792627, 15.61552812808831, 47.66225366793383)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_2.result(), "L/3", True)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_7 = Sketch_2.addLine(50, 15.56025031353752, 50, -15.54016280334104)
+SketchLine_8 = Sketch_2.addLine(50, -15.54016280334104, 36.52981427174974, 0)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_9 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(36.52981427174974, 0, 50, 15.56025031353752)
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_10.endPoint())
+SketchLine_11 = Sketch_2.addLine(50, 15.56025031353752, 73.27778179602213, 0)
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_11.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_3_EndVertex"), False)
+SketchPoint_1 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
+SketchLine_12 = Sketch_2.addLine(73.27778179602213, 0, 50, -15.54016280334104)
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_12.endPoint())
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_9).startPoint(), SketchLine_7.result(), "D", True)
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
+Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_10r-SketchLine_8r-SketchLine_7r_wire")])
+Face_4 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_7r-SketchLine_12r-SketchLine_11r_wire")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Shell_2 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_4_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("SHELL", "Shell_2_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [0], [0], [4], [15], [30])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), 5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Split_1_1_2"), model.selection("FACE", "Split_1_1_1")])
+Split_2 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkResult(Split_2, model, 1, [0], [0], [6], [22], [44])
+model.testHaveNamingSubshapes(Split_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchArc_1 = Sketch_1.addArc(9.761379814097372, -58.25586643592183, 0, 0, -48.40807467084933, -47.99209154562215, False)
+SketchArc_2 = Sketch_1.addArc(-12.6706171814691, -54.29782746957817, -48.40807467084933, -47.99209154562215, 12.46009047944227, -80.47750863283412, False)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchAPI_Point(SketchPoint_1).coordinates())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchArc_2_2")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 50, 0)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
+Point_2 = model.addPoint(Part_1_doc, 0, 0, 10)
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[0],[0],[2],[9],[18])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_7 = Sketch_2.addLine(-14.33356820392057, 60, 15.66643179607943, 60)
+SketchLine_8 = Sketch_2.addLine(15.66643179607943, 60, 15.66643179607943, 30)
+SketchLine_9 = Sketch_2.addLine(15.66643179607943, 30, -14.33356820392057, 30)
+SketchLine_10 = Sketch_2.addLine(-14.33356820392057, 30, -14.33356820392057, 60)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_8.result())
+SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_9.result())
+SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_10.result())
+SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_9.result(), "L")
+SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_8.result(), "L")
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.result(), "L", True)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Wire_1_objects = [model.selection("EDGE", "Sketch_2/SketchLine_7"), model.selection("EDGE", "Sketch_2/SketchLine_8"), model.selection("EDGE", "Sketch_2/SketchLine_9"), model.selection("EDGE", "Sketch_2/SketchLine_10")]
+Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("WIRE", "Wire_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [0], [0], [8], [30], [60])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 5, 10)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Cone_1_1")], [model.selection("FACE", "PartSet/YOZ"), model.selection("FACE", "PartSet/XOZ")])
+model.do()
+
+model.checkResult(Split_1,model,1,[4],[4],[20],[72],[144])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "12")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "L/2", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 15.49193338482974, -4, 0, -16, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(15.49193338482974, -4, 0, 12)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 12, 0, -16)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), "Shift/3")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift/3", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Split_2 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("COMPOUND", "Split_1_1")])
+model.do()
+
+model.checkResult(Split_2, model, 1, [2], [2], [14], [60], [120])
+model.testHaveNamingSubshapes(Split_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "12")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "L/2", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 15.49193338482974, -4, 0, -16, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(15.49193338482974, -4, 0, 12)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 12, 0, -16)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), "Shift/3")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift/3", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Split_1_1_2"), model.selection("FACE", "Split_1_1_1")])
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], model.selection("EDGE", "PartSet/OZ"), 1, 3)
+Split_2 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("COMPOUND", "LinearCopy_1_1")])
+model.do()
+
+model.checkResult(Split_2, model, 1, [4], [4], [30], [132], [264])
+model.testHaveNamingSubshapes(Split_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "12")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "L/2", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 15.49193338482974, -4, 0, -16, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(15.49193338482974, -4, 0, 12)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 12, 0, -16)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), "Shift/3")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("FACE", "Face_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [2], [2], [12], [48], [96])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "12")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "L/2", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 15.49193338482974, -4, 0, -16, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(15.49193338482974, -4, 0, 12)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 12, 0, -16)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), "Shift/3")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift/3", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Split_1_1_2"), model.selection("FACE", "Split_1_1_1")])
+Split_2 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("SHELL", "Shell_1_1")])
+model.do()
+
+model.checkResult(Split_2, model, 1, [2], [2], [14], [60], [120])
+model.testHaveNamingSubshapes(Split_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(-67.57764876632801, 2.198838896952097, 88.39332365747461, 44.12336719883891)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_2 = Sketch_2.addLine(-40.60522496371553, -29.75761973875181, -38.84615384615385, 66.99129172714079)
+SketchLine_3 = Sketch_2.addLine(-38.84615384615385, 66.99129172714079, 50.86647314949202, 73.4412191582003)
+SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_2.addLine(50.86647314949202, 73.4412191582003, 55.26415094339622, -34.15529753265602)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_2.addLine(55.26415094339622, -34.15529753265602, -40.60522496371553, -29.75761973875181)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_2.startPoint())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
+Wire_1_objects = [model.selection("EDGE", "Sketch_2/SketchLine_5"), model.selection("EDGE", "Sketch_2/SketchLine_2"), model.selection("EDGE", "Sketch_2/SketchLine_3"), model.selection("EDGE", "Sketch_2/SketchLine_4")]
+Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[0],[0],[0],[6],[12])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "R", "50")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_4 = Sketch_2.addLine(29.74624907439609, 30.07487215963349, 31.08202242513997, 0)
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
+SketchLine_5 = Sketch_2.addLine(31.08202242513997, 0, 45.45797599933665, 0)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_6 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
+SketchLine_7 = Sketch_2.addLine(45.45797599933665, 0, 45.83553599350717, -22.747645239555)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(45.83553599350717, -22.747645239555, 70.40999925541598, 30.039147749218)
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_2.addLine(70.40999925541598, 30.039147749218, 29.74624907439609, 30.07487215963349)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.endPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchArc_1_2f_wire")])
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchLine_7f-SketchLine_8f-SketchLine_9f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("FACE", "Face_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [0], [0], [0], [6], [12])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
+SketchLine_7.setName("SketchLine_8")
+SketchLine_7.result().setName("SketchLine_8")
+SketchLine_7.setAuxiliary(True)
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
+SketchLine_8 = Sketch_2.addLine(57.5, 0, 65, -10.81485284151855)
+SketchLine_8.setName("SketchLine_9")
+SketchLine_8.result().setName("SketchLine_9")
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_9 = SketchProjection_3.createdFeature()
+SketchLine_9.setName("SketchLine_10")
+SketchLine_9.result().setName("SketchLine_10")
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(65, -10.81485284151855, 65, 11.50710132369052)
+SketchLine_10.setName("SketchLine_11")
+SketchLine_10.result().setName("SketchLine_11")
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
+SketchLine_11 = Sketch_2.addLine(65, 11.50710132369052, 50, 11.50710132369052)
+SketchLine_11.setName("SketchLine_12")
+SketchLine_11.result().setName("SketchLine_12")
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_7.result())
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_8.startPoint(), SketchLine_7.result(), "L/4", True)
+SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_10.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_10.result(), SketchLine_11.result()]
+SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
+[SketchLine_12, SketchLine_13, SketchLine_14] = SketchConstraintMirror_1.mirrored()
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchLine_13.setName("SketchLine_14")
+SketchLine_13.result().setName("SketchLine_14")
+SketchLine_12.setName("SketchLine_13")
+SketchLine_12.result().setName("SketchLine_13")
+SketchLine_15 = Sketch_2.addLine(42.5, 0, 57.5, 0)
+SketchLine_15.setName("SketchLine_16")
+SketchLine_15.result().setName("SketchLine_16")
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_8.startPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_15r-SketchLine_14r-SketchLine_13r-SketchLine_16f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("SHELL", "Shell_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [0], [0], [0], [10], [20])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), 5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_2f-SketchLine_3f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [0], [0], [0], [9], [18])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_2 = model.addPoint(Part_1_doc, 10, 10, 0)
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-27.43492861072797, 41.55044273324706, 64.29883100829633, -35.76346801736826)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "Point_1"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchAPI_Point(SketchPoint_1).coordinates())
+SketchLine_2 = Sketch_1.addLine(64.5972559141328, -34.82170453629492, 63.39686648861513, 69.37209759863701)
+SketchLine_3 = Sketch_1.addLine(63.39686648861513, 69.37209759863701, -27.43492861072797, 41.55044273324706)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+model.do()
+Wire_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3")]
+Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
+model.do()
+
+model.checkResult(Split_1,model,1,[0],[0],[0],[4],[8])
+model.testHaveNamingSubshapes(Split_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "R", "50")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_4 = Sketch_2.addLine(31.79164821526215, 49.99496405877289, 8.200436015051352, 0)
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
+SketchLine_5 = Sketch_2.addLine(8.200436015051352, 0, 27.24680168984479, -49.85269382803262)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1"), False)
+SketchPoint_2 = SketchProjection_3.createdFeature()
+SketchArc_2 = Sketch_2.addArc(31.08202242513997, 1.147024884467139e-21, 27.24680168984479, -49.85269382803262, 31.79164821526215, 49.99496405877289, False)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchArc_2.center())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], "R")
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchArc_1_2f_wire")])
+Wire_2 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchArc_2_2f_wire")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("WIRE", "Wire_2_1")])
+model.do()
+
+model.checkResult(Split_1, model, 1, [0], [0], [0], [4], [8])
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_11.result())
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_8r-SketchLine_9f-SketchLine_10f-SketchLine_11f")])
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("FACE", "Face_1_1")])
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("FACE", "Face_1_1")])
model.do()
# now add an additional edge to the first sketch as it is described in the issue
model.end()
# check that the plane is located as previously
-model.testNbSubResults(Fill_1, [2])
-model.testResultsVolumes(Fill_1, [120])
+model.testNbSubResults(Split_1, [2])
+model.testResultsVolumes(Split_1, [120])
assert(model.checkPythonDump())
