--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+from ModelAPI import *
+from GeomAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "l", "200")
+model.addParameter(Part_1_doc, "b", "100")
+model.addParameter(Part_1_doc, "h", "25")
+model.addParameter(Part_1_doc, "r", "25")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(200, 0, 0, 0)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchLine_2 = Sketch_1.addLine(0, 0, 0, 100)
+SketchLine_3 = Sketch_1.addLine(0, 100, 200, 100)
+SketchLine_4 = Sketch_1.addLine(200, 100, 200, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_1.setName("SketchConstraintCoincidence_2")
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_3")
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_4")
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_5")
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "l")
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), "b")
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchAPI_Point(SketchPoint_1).coordinates())
+SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_6")
+SketchCircle_1 = Sketch_1.addCircle(50, 50, 25)
+SketchCircle_2 = Sketch_1.addCircle(150, 50, 25)
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], "r")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1])
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchCircle_1.center(), SketchLine_2.result(), "l/4", True)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchCircle_1.center(), SketchLine_1.result(), "b/2", True)
+SketchLine_5 = Sketch_1.addLine(50, 50, 150, 50)
+SketchLine_5.setAuxiliary(True)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_7")
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_5.endPoint())
+SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_4.result(), "l/4", True)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "h", 0)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 100, False)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Plane_1")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_2")])
+Group_1.setName("Inlet")
+Group_1.result().setName("Inlet")
+Group_2 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4")])
+Group_2.setName("Outlet")
+Group_2.result().setName("Outlet")
+Group_3_objects = [model.selection("FACE", "Partition_1_1_1/Modified_Face&Extrusion_1_1_1/To_Face"), model.selection("FACE", "Partition_1_1_1/Modified_Face&Sketch_1/SketchLine_1"), model.selection("FACE", "Partition_1_1_1/Modified_Face&Extrusion_1_1_1/From_Face"), model.selection("FACE", "Partition_1_1_1/Modified_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Partition_1_1_2/Modified_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Partition_1_1_2/Modified_Face&Extrusion_1_1_1/From_Face"), model.selection("FACE", "Partition_1_1_2/Modified_Face&Sketch_1/SketchLine_1"), model.selection("FACE", "Partition_1_1_2/Modified_Face&Extrusion_1_1_1/To_Face")]
+Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
+Group_3.setName("Wall")
+Group_3.result().setName("Wall")
+Group_4 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Partition_1_1_3"), model.selection("SOLID", "Partition_1_1_4")])
+Group_4.setName("Cylinders")
+Group_4.result().setName("Cylinders")
+Group_4.result().setColor(170, 0, 0)
+Group_5 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Partition_1_1_1"), model.selection("SOLID", "Partition_1_1_2")])
+Group_5.setName("Fluide")
+Group_5.result().setName("Fluide")
+Group_5.result().setColor(0, 0, 255)
+Group_6 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchCircle_1_2"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchCircle_2_2")])
+Group_6.setName("Faces_cyl")
+Group_6.result().setName("Faces_cyl")
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), 10, False)
+Partition_2 = model.addPartition(Part_1_doc, [model.selection("COMPSOLID", "Partition_1_1"), model.selection("FACE", "Plane_2")])
+model.do()
+# move groups after the latest partitiion
+Part_1_doc.moveFeature(Group_1.feature(), Partition_2.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
+Part_1_doc.moveFeature(Group_5.feature(), Group_4.feature())
+Part_1_doc.moveFeature(Group_6.feature(), Group_5.feature())
+model.end()
+
+# check groups are correct: group name, number of elements, elements type
+Group_Info = [
+(Group_1, 2, GeomAPI_Shape.FACE), # Inlet
+(Group_2, 2, GeomAPI_Shape.FACE), # Outlet
+(Group_3, 12, GeomAPI_Shape.FACE), # Wall
+(Group_4, 4, GeomAPI_Shape.SOLID), # Cylinders
+(Group_5, 4, GeomAPI_Shape.SOLID), # Fluide
+(Group_6, 4, GeomAPI_Shape.FACE)] # Faces_cyl
+
+aFactory = ModelAPI_Session.get().validators()
+for group in Group_Info:
+ selectionList = group[0].feature().selectionList("group_list")
+ assert(selectionList.size() == group[1])
+ assert(aFactory.validate(group[0].feature()))
+ for i in range(group[1]):
+ assert(group[0].groupList().value(i).value().shapeType() == group[2])
+
+assert(model.checkPythonDump())
