+++ /dev/null
-# - Config file for the @PROJECT_NAME@ package
-# It defines the following variables.
-# Specific to the pacakge @PROJECT_NAME@ itself:
-# @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
-#
-
-###############################################################
-# Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
-#
-# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or
-# email : webmaster.salome@opencascade.com
-###############################################################
-
-### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
-@PACKAGE_INIT@
-
-# Load the dependencies for the libraries of @PROJECT_NAME@
-# (contains definitions for IMPORTED targets). This is only
-# imported if we are not built as a subproject (in this case targets are already there)
-IF(NOT TARGET GEOMbasic AND NOT @PROJECT_NAME@_BINARY_DIR)
- INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
-ENDIF()
-
-# Package root dir:
-SET_AND_CHECK(GEOM_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
-
-# Include directories
-SET_AND_CHECK(GEOM_INCLUDE_DIRS "${GEOM_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
-
-#### Now the specificities
-
-# Options exported by the package:
-SET(SALOME_BUILD_DOC @SALOME_BUILD_DOC@)
-SET(SALOME_BUILD_TESTS @SALOME_BUILD_TESTS@)
-
-# Advanced options
-SET(SALOME_BUILD_GUI @SALOME_BUILD_GUI@)
-SET(SALOME_GEOM_USE_OPENCV @SALOME_GEOM_USE_OPENCV@)
-
-# Level 1 prerequisites:
-SET_AND_CHECK(KERNEL_ROOT_DIR_EXP "@PACKAGE_KERNEL_ROOT_DIR@")
-SET_AND_CHECK(CAS_ROOT_DIR_EXP "@PACKAGE_CAS_ROOT_DIR@")
-
-# Optional level 1 prerequisites:
-IF(SALOME_BUILD_GUI)
- SET_AND_CHECK(GUI_ROOT_DIR_EXP "@PACKAGE_GUI_ROOT_DIR@")
-ENDIF()
-IF(SALOME_GEOM_USE_OPENCV)
- SET_AND_CHECK(OPENCV_ROOT_DIR_EXP "@PACKAGE_OPENCV_ROOT_DIR@")
-ENDIF()
-
-# For all prerequisites, load the corresponding targets if the package was used
-# in CONFIG mode. This ensures dependent projects link correctly
-# without having to set LD_LIBRARY_PATH:
-SET(_PREREQ CAS SalomeGUI OpenCV)
-SET(_PREREQ_CONFIG_DIR "@CAS_DIR@" "@SalomeGUI_DIR@" "@OpenCV_DIR@")
-LIST(LENGTH _PREREQ_CONFIG_DIR _list_len)
-# Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
-MATH(EXPR _range "${_list_len}-1")
-FOREACH(_p RANGE ${_range})
- LIST(GET _PREREQ ${_p} _pkg )
- LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
- IF(_pkg_dir)
- MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
- FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
- PATHS "${_pkg_dir}"
- NO_DEFAULT_PATH)
- ENDIF()
-ENDFOREACH()
-
-# Installation directories
-SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
-SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
-SET(SALOME_INSTALL_IDLS "@SALOME_INSTALL_IDLS@")
-SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
-SET(SALOME_INSTALL_SCRIPT_SCRIPTS "@SALOME_INSTALL_SCRIPT_SCRIPTS@")
-SET(SALOME_INSTALL_SCRIPT_DATA "@SALOME_INSTALL_SCRIPT_DATA@")
-SET(SALOME_INSTALL_SCRIPT_PYTHON "@SALOME_INSTALL_SCRIPT_PYTHON@")
-SET(SALOME_INSTALL_CMAKE "@SALOME_INSTALL_CMAKE@")
-SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
-SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
-SET(SALOME_INSTALL_PYTHON_SHARED "@SALOME_INSTALL_PYTHON_SHARED@")
-SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
-SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
-SET(SALOME_INSTALL_AMCONFIG_LOCAL "@SALOME_INSTALL_AMCONFIG_LOCAL@")
-
-# Include KERNEL targets if they were not already loaded:
-IF(NOT (TARGET SALOMEBasics))
- INCLUDE("${KERNEL_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeKERNELTargets.cmake")
-ENDIF()
-
-# Exposed GEOM targets:
-SET(GEOM_GEOMArchimede GEOMArchimede)
-SET(GEOM_BREPExport BREPExport)
-SET(GEOM_BREPImport BREPImport)
-SET(GEOM_BlockFix BlockFix)
-SET(GEOM_GEOMbasic GEOMbasic)
-SET(GEOM_GEOMAlgo GEOMAlgo)
-SET(GEOM_GEOMClient GEOMClient)
-SET(GEOM_GEOMImpl GEOMImpl)
-SET(GEOM_GEOMUtils GEOMUtils)
-SET(GEOM_GEOMEngine GEOMEngine)
-SET(GEOM_GEOM_SupervEngine GEOM_SupervEngine)
-SET(GEOM_IGESExport IGESExport)
-SET(GEOM_IGESImport IGESImport)
-SET(GEOM_GEOMSketcher GEOMSketcher)
-SET(GEOM_SalomeIDLGEOM SalomeIDLGEOM)
-SET(GEOM_STEPExport STEPExport)
-SET(GEOM_STEPImport STEPImport)
-SET(GEOM_STLExport STLExport)
-SET(GEOM_ShHealOper ShHealOper)
-SET(GEOM_XAO XAO)
-SET(GEOM_AdvancedEngine AdvancedEngine)
-SET(GEOM_AdvancedGUI AdvancedGUI)
-SET(GEOM_BasicGUI BasicGUI)
-SET(GEOM_BlocksGUI BlocksGUI)
-SET(GEOM_BooleanGUI BooleanGUI)
-SET(GEOM_BuildGUI BuildGUI)
-SET(GEOM_DisplayGUI DisplayGUI)
-SET(GEOM_DlgRef DlgRef)
-SET(GEOM_EntityGUI EntityGUI)
-SET(GEOM_GEOMBase GEOMBase)
-SET(GEOM_GEOMFiltersSelection GEOMFiltersSelection)
-SET(GEOM_GEOM GEOM)
-SET(GEOM_GEOMToolsGUI GEOMToolsGUI)
-SET(GEOM_GenerationGUI GenerationGUI)
-SET(GEOM_GroupGUI GroupGUI)
-SET(GEOM_Material Material)
-SET(GEOM_MeasureGUI MeasureGUI)
-SET(GEOM_GEOMObject GEOMObject)
-SET(GEOM_OCC2VTK OCC2VTK)
-SET(GEOM_VTKExport VTKExport)
-SET(GEOM_OperationGUI OperationGUI)
-SET(GEOM_PrimitiveGUI PrimitiveGUI)
-SET(GEOM_RepairGUI RepairGUI)
-SET(GEOM_TransformationGUI TransformationGUI)
-SET(GEOM_ImportExportGUI ImportExportGUI)
-SET(GEOM_GEOMShapeRec GEOMShapeRec)
