# $Header$
import salome
-salome.salome_init()
+import geompyDC
from salome import *
-import GEOM
+geom = lcc.FindOrLoadComponent("FactoryServer", "GEOM")
+geom.init_geom(salome.myStudy)
-"""
- \namespace geompy
- \brief Module geompy
-"""
-
-g = lcc.FindOrLoadComponent("FactoryServer", "GEOM")
-geom = g._narrow( GEOM.GEOM_Gen )
-#gg = ImportComponentGUI("GEOM")
-#gg.initGeomGen()
-
-#SRN: modified on Mar 18, 2005
-
-myBuilder = None
-myStudyId = 0
-father = None
-
-BasicOp = None
-CurvesOp = None
-PrimOp = None
-ShapesOp = None
-HealOp = None
-InsertOp = None
-BoolOp = None
-TrsfOp = None
-LocalOp = None
-MeasuOp = None
-BlocksOp = None
-GroupOp = None
-
-def init_geom(theStudy):
-
- global myStudy, myBuilder, myStudyId, BasicOp, CurvesOp, PrimOp, ShapesOp, HealOp
- global InsertOp, BoolOp, TrsfOp, LocalOp, MeasuOp, BlocksOp, GroupOp, father
-
- myStudy = theStudy
- myStudyId = myStudy._get_StudyId()
- myBuilder = myStudy.NewBuilder()
- father = myStudy.FindComponent("GEOM")
- if father is None:
- father = myBuilder.NewComponent("GEOM")
- A1 = myBuilder.FindOrCreateAttribute(father, "AttributeName")
- FName = A1._narrow(SALOMEDS.AttributeName)
- FName.SetValue("Geometry")
- A2 = myBuilder.FindOrCreateAttribute(father, "AttributePixMap")
- aPixmap = A2._narrow(SALOMEDS.AttributePixMap)
- aPixmap.SetPixMap("ICON_OBJBROWSER_Geometry")
- myBuilder.DefineComponentInstance(father,geom)
- pass
-
- # -----------------------------------------------------------------------------
- # Assign Operations Interfaces
- # -----------------------------------------------------------------------------
-
- BasicOp = geom.GetIBasicOperations (myStudyId)
- CurvesOp = geom.GetICurvesOperations (myStudyId)
- PrimOp = geom.GetI3DPrimOperations (myStudyId)
- ShapesOp = geom.GetIShapesOperations (myStudyId)
- HealOp = geom.GetIHealingOperations (myStudyId)
- InsertOp = geom.GetIInsertOperations (myStudyId)
- BoolOp = geom.GetIBooleanOperations (myStudyId)
- TrsfOp = geom.GetITransformOperations(myStudyId)
- LocalOp = geom.GetILocalOperations (myStudyId)
- MeasuOp = geom.GetIMeasureOperations (myStudyId)
- BlocksOp = geom.GetIBlocksOperations (myStudyId)
- GroupOp = geom.GetIGroupOperations (myStudyId)
- pass
-
-init_geom(myStudy)
-
-#SRN: end of modifications
-
-## Get name for sub-shape aSubObj of shape aMainObj
-#
-# Example: see GEOM_TestAll.py
-def SubShapeName(aSubObj, aMainObj):
- #aSubId = orb.object_to_string(aSubObj)
- #aMainId = orb.object_to_string(aMainObj)
- #index = gg.getIndexTopology(aSubId, aMainId)
- #name = gg.getShapeTypeString(aSubId) + "_%d"%(index)
- index = ShapesOp.GetTopologyIndex(aMainObj, aSubObj)
- name = ShapesOp.GetShapeTypeString(aSubObj) + "_%d"%(index)
- return name
-
-## Publish in study aShape with name aName
-#
-# Example: see GEOM_TestAll.py
-def addToStudy(aShape, aName):
- try:
- aSObject = geom.AddInStudy(myStudy, aShape, aName, None)
- except:
- print "addToStudy() failed"
- return ""
- return aShape.GetStudyEntry()
-
-## Publish in study aShape with name aName as sub-object of previously published aFather
-#
-# Example: see GEOM_TestAll.py
-def addToStudyInFather(aFather, aShape, aName):
- try:
- aSObject = geom.AddInStudy(myStudy, aShape, aName, aFather)
- except:
- print "addToStudyInFather() failed"
- return ""
- return aShape.GetStudyEntry()
-
-# -----------------------------------------------------------------------------
-# enumeration ShapeType as a dictionary
-# -----------------------------------------------------------------------------
-
-ShapeType = {"COMPOUND":0, "COMPSOLID":1, "SOLID":2, "SHELL":3, "FACE":4, "WIRE":5, "EDGE":6, "VERTEX":7, "SHAPE":8}
-
-# -----------------------------------------------------------------------------
-# enumeration shape_kind
-# -----------------------------------------------------------------------------
-
-kind = GEOM.GEOM_IKindOfShape
-
-class info:
- UNKNOWN = 0
- CLOSED = 1
- UNCLOSED = 2
-
-# -----------------------------------------------------------------------------
-# Basic primitives
-# -----------------------------------------------------------------------------
-
-## Create point by three coordinates.
-# @param theX The X coordinate of the point.
-# @param theY The Y coordinate of the point.
-# @param theZ The Z coordinate of the point.
-# @return New GEOM_Object, containing the created point.
-#
-# Example: see GEOM_TestAll.py
-def MakeVertex(theX, theY, theZ):
- anObj = BasicOp.MakePointXYZ(theX, theY, theZ)
- if BasicOp.IsDone() == 0:
- print "MakePointXYZ : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a point, distant from the referenced point
-# on the given distances along the coordinate axes.
-# @param theReference The referenced point.
-# @param theX Displacement from the referenced point along OX axis.
-# @param theY Displacement from the referenced point along OY axis.
-# @param theZ Displacement from the referenced point along OZ axis.
-# @return New GEOM_Object, containing the created point.
-#
-# Example: see GEOM_TestAll.py
-def MakeVertexWithRef(theReference, theX, theY, theZ):
- anObj = BasicOp.MakePointWithReference(theReference, theX, theY, theZ)
- if BasicOp.IsDone() == 0:
- print "MakePointWithReference : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a point, corresponding to the given parameter on the given curve.
-# @param theRefCurve The referenced curve.
-# @param theParameter Value of parameter on the referenced curve.
-# @return New GEOM_Object, containing the created point.
-#
-# Example: see GEOM_TestAll.py
-def MakeVertexOnCurve(theRefCurve, theParameter):
- anObj = BasicOp.MakePointOnCurve(theRefCurve, theParameter)
- if BasicOp.IsDone() == 0:
- print "MakePointOnCurve : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a tangent, corresponding to the given parameter on the given curve.
-# @param theRefCurve The referenced curve.
-# @param theParameter Value of parameter on the referenced curve.
-# @return New GEOM_Object, containing the created tangent.
-def MakeTangentOnCurve(theRefCurve, theParameter):
- anObj = BasicOp.MakeTangentOnCurve(theRefCurve, theParameter)
- if BasicOp.IsDone() == 0:
- print "MakeTangentOnCurve : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a vector with the given components.
-# @param theDX X component of the vector.
-# @param theDY Y component of the vector.
-# @param theDZ Z component of the vector.
-# @return New GEOM_Object, containing the created vector.
-#
-# Example: see GEOM_TestAll.py
-def MakeVectorDXDYDZ(theDX, theDY, theDZ):
- anObj = BasicOp.MakeVectorDXDYDZ(theDX, theDY, theDZ)
- if BasicOp.IsDone() == 0:
- print "MakeVectorDXDYDZ : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a vector between two points.
-# @param thePnt1 Start point for the vector.
-# @param thePnt2 End point for the vector.
-# @return New GEOM_Object, containing the created vector.
-
-# Example: see GEOM_TestAll.py
-def MakeVector(thePnt1, thePnt2):
- anObj = BasicOp.MakeVectorTwoPnt(thePnt1, thePnt2)
- if BasicOp.IsDone() == 0:
- print "MakeVectorTwoPnt : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a line, passing through the given point
-# and parrallel to the given direction
-# @param thePnt Point. The resulting line will pass through it.
-# @param theDir Direction. The resulting line will be parallel to it.
-# @return New GEOM_Object, containing the created line.
-#
-# Example: see GEOM_TestAll.py
-def MakeLine(thePnt, theDir):
- anObj = BasicOp.MakeLine(thePnt, theDir)
- if BasicOp.IsDone() == 0:
- print "MakeLine : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a line, passing through the given points
-# @param thePnt1 First of two points, defining the line.
-# @param thePnt2 Second of two points, defining the line.
-# @return New GEOM_Object, containing the created line.
-#
-# Example: see GEOM_TestAll.py
-def MakeLineTwoPnt(thePnt1, thePnt2):
- anObj = BasicOp.MakeLineTwoPnt(thePnt1, thePnt2)
- if BasicOp.IsDone() == 0:
- print "MakeLineTwoPnt : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a plane, passing through the given point
-# and normal to the given vector.
-# @param thePnt Point, the plane has to pass through.
-# @param theVec Vector, defining the plane normal direction.
-# @param theTrimSize Half size of a side of quadrangle face, representing the plane.
-# @return New GEOM_Object, containing the created plane.
-#
-# Example: see GEOM_TestAll.py
-def MakePlane(thePnt, theVec, theTrimSize):
- anObj = BasicOp.MakePlanePntVec(thePnt, theVec, theTrimSize)
- if BasicOp.IsDone() == 0:
- print "MakePlanePntVec : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a plane, passing through the three given points
-# @param thePnt1 First of three points, defining the plane.
-# @param thePnt2 Second of three points, defining the plane.
-# @param thePnt3 Fird of three points, defining the plane.
-# @param theTrimSize Half size of a side of quadrangle face, representing the plane.
-# @return New GEOM_Object, containing the created plane.
-#
-# Example: see GEOM_TestAll.py
-def MakePlaneThreePnt(thePnt1, thePnt2, thePnt3, theTrimSize):
- anObj = BasicOp.MakePlaneThreePnt(thePnt1, thePnt2, thePnt3, theTrimSize)
- if BasicOp.IsDone() == 0:
- print "MakePlaneThreePnt : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a plane, similar to the existing one, but with another size of representing face.
-# @param theFace Referenced plane or LCS(Marker).
-# @param theTrimSize New half size of a side of quadrangle face, representing the plane.
-# @return New GEOM_Object, containing the created plane.
-#
-# Example: see GEOM_TestAll.py
-def MakePlaneFace(theFace, theTrimSize):
- anObj = BasicOp.MakePlaneFace(theFace, theTrimSize)
- if BasicOp.IsDone() == 0:
- print "MakePlaneFace : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a local coordinate system.
-# @param OX,OY,OZ Three coordinates of coordinate system origin.
-# @param XDX,XDY,XDZ Three components of OX direction
-# @param YDX,YDY,YDZ Three components of OY direction
-# @return New GEOM_Object, containing the created coordinate system.
-#
-# Example: see GEOM_TestAll.py
-def MakeMarker(OX,OY,OZ, XDX,XDY,XDZ, YDX,YDY,YDZ):
- anObj = BasicOp.MakeMarker(OX,OY,OZ, XDX,XDY,XDZ, YDX,YDY,YDZ)
- if BasicOp.IsDone() == 0:
- print "MakeMarker : ", BasicOp.GetErrorCode()
- return anObj
-
-## Create a local coordinate system.
-# @param theOrigin Point of coordinate system origin.
-# @param theXVec Vector of X direction
-# @param theYVec Vector of Y direction
-# @return New GEOM_Object, containing the created coordinate system.
-def MakeMarkerPntTwoVec(theOrigin, theXVec, theYVec):
- O = PointCoordinates( theOrigin )
- OXOY = []
- for vec in [ theXVec, theYVec ]:
- v1, v2 = SubShapeAll( vec, ShapeType["VERTEX"] )
- p1 = PointCoordinates( v1 )
- p2 = PointCoordinates( v2 )
- for i in range( 0, 3 ):
- OXOY.append( p2[i] - p1[i] )
- #
- anObj = BasicOp.MakeMarker( O[0], O[1], O[2],
- OXOY[0], OXOY[1], OXOY[2],
- OXOY[3], OXOY[4], OXOY[5], )
- if BasicOp.IsDone() == 0:
- print "MakeMarker : ", BasicOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Curves
-# -----------------------------------------------------------------------------
-
-## Create an arc of circle, passing through three given points.
-# @param thePnt1 Start point of the arc.
-# @param thePnt2 Middle point of the arc.
-# @param thePnt3 End point of the arc.
-# @return New GEOM_Object, containing the created arc.
-#
-# Example: see GEOM_TestAll.py
-def MakeArc(thePnt1, thePnt2, thePnt3):
- anObj = CurvesOp.MakeArc(thePnt1, thePnt2, thePnt3)
- if CurvesOp.IsDone() == 0:
- print "MakeArc : ", CurvesOp.GetErrorCode()
- return anObj
-
-## Create an arc of circle from a center and 2 points.
-# @param thePnt1 Center of the arc
-# @param thePnt2 Start point of the arc. (Gives also the radius of the arc)
-# @param thePnt3 End point of the arc (Gives also a direction)
-# @return New GEOM_Object, containing the created arc.
-#
-# Example: see GEOM_TestAll.py
-def MakeArcCenter(thePnt1, thePnt2, thePnt3,theSense):
- anObj = CurvesOp.MakeArcCenter(thePnt1, thePnt2, thePnt3,theSense)
- if CurvesOp.IsDone() == 0:
- print "MakeArcCenter : ", CurvesOp.GetErrorCode()
- return anObj
-
-## Create a circle with given center, normal vector and radius.
-# @param thePnt Circle center.
-# @param theVec Vector, normal to the plane of the circle.
-# @param theR Circle radius.
-# @return New GEOM_Object, containing the created circle.
-#
-# Example: see GEOM_TestAll.py
-def MakeCircle(thePnt, theVec, theR):
- anObj = CurvesOp.MakeCirclePntVecR(thePnt, theVec, theR)
- if CurvesOp.IsDone() == 0:
- print "MakeCirclePntVecR : ", CurvesOp.GetErrorCode()
- return anObj
-
-## Create a circle, passing through three given points
-# @param thePnt1,thePnt2,thePnt3 Points, defining the circle.
-# @return New GEOM_Object, containing the created circle.
-#
-# Example: see GEOM_TestAll.py
-def MakeCircleThreePnt(thePnt1, thePnt2, thePnt3):
- anObj = CurvesOp.MakeCircleThreePnt(thePnt1, thePnt2, thePnt3)
- if CurvesOp.IsDone() == 0:
- print "MakeCircleThreePnt : ", CurvesOp.GetErrorCode()
- return anObj
-
-## Create an ellipse with given center, normal vector and radiuses.
-# @param thePnt Ellipse center.
-# @param theVec Vector, normal to the plane of the ellipse.
-# @param theRMajor Major ellipse radius.
-# @param theRMinor Minor ellipse radius.
-# @return New GEOM_Object, containing the created ellipse.
-#
-# Example: see GEOM_TestAll.py
-def MakeEllipse(thePnt, theVec, theRMajor, theRMinor):
- anObj = CurvesOp.MakeEllipse(thePnt, theVec, theRMajor, theRMinor)
- if CurvesOp.IsDone() == 0:
- print "MakeEllipse : ", CurvesOp.GetErrorCode()
- return anObj
-
-## Create a polyline on the set of points.
-# @param thePoints Sequence of points for the polyline.
-# @return New GEOM_Object, containing the created polyline.
-#
-# Example: see GEOM_TestAll.py
-def MakePolyline(thePoints):
- anObj = CurvesOp.MakePolyline(thePoints)
- if CurvesOp.IsDone() == 0:
- print "MakePolyline : ", CurvesOp.GetErrorCode()
- return anObj
-
-## Create bezier curve on the set of points.
-# @param thePoints Sequence of points for the bezier curve.
-# @return New GEOM_Object, containing the created bezier curve.
-#
-# Example: see GEOM_TestAll.py
-def MakeBezier(thePoints):
- anObj = CurvesOp.MakeSplineBezier(thePoints)
- if CurvesOp.IsDone() == 0:
- print "MakeSplineBezier : ", CurvesOp.GetErrorCode()
- return anObj
-
-## Create B-Spline curve on the set of points.
-# @param thePoints Sequence of points for the B-Spline curve.
-# @return New GEOM_Object, containing the created B-Spline curve.
-#
-# Example: see GEOM_TestAll.py
-def MakeInterpol(thePoints):
- anObj = CurvesOp.MakeSplineInterpolation(thePoints)
- if CurvesOp.IsDone() == 0:
- print "MakeSplineInterpolation : ", CurvesOp.GetErrorCode()
- return anObj
-
-## Create a sketcher (wire or face), following the textual description,
-# passed through \a theCommand argument. \n
-# Edges of the resulting wire or face will be arcs of circles and/or linear segments. \n
-# Format of the description string have to be the following:
-#
-# "Sketcher[:F x1 y1]:CMD[:CMD[:CMD...]]"
-#
-# Where:
-# - x1, y1 are coordinates of the first sketcher point (zero by default),
-# - CMD is one of
-# - "R angle" : Set the direction by angle
-# - "D dx dy" : Set the direction by DX & DY
-# .
-# \n
-# - "TT x y" : Create segment by point at X & Y
-# - "T dx dy" : Create segment by point with DX & DY
-# - "L length" : Create segment by direction & Length
-# - "IX x" : Create segment by direction & Intersect. X
-# - "IY y" : Create segment by direction & Intersect. Y
-# .
-# \n
-# - "C radius length" : Create arc by direction, radius and length(in degree)
-# .
-# \n
-# - "WW" : Close Wire (to finish)
-# - "WF" : Close Wire and build face (to finish)
-#
-# @param theCommand String, defining the sketcher in local
-# coordinates of the working plane.
-# @param theWorkingPlane Nine double values, defining origin,
-# OZ and OX directions of the working plane.
-# @return New GEOM_Object, containing the created wire.
-#
-# Example: see GEOM_TestAll.py
-def MakeSketcher(theCommand, theWorkingPlane = [0,0,0, 0,0,1, 1,0,0]):
- anObj = CurvesOp.MakeSketcher(theCommand, theWorkingPlane)
- if CurvesOp.IsDone() == 0:
- print "MakeSketcher : ", CurvesOp.GetErrorCode()
- return anObj
-
-## Create a sketcher (wire or face), following the textual description,
-# passed through \a theCommand argument. \n
-# For format of the description string see the previous method.\n
-# @param theCommand String, defining the sketcher in local
-# coordinates of the working plane.
-# @param theWorkingPlane Planar Face or LCS(Marker) of the working plane.
-# @return New GEOM_Object, containing the created wire.
-def MakeSketcherOnPlane(theCommand, theWorkingPlane):
- anObj = CurvesOp.MakeSketcherOnPlane(theCommand, theWorkingPlane)
- if CurvesOp.IsDone() == 0:
- print "MakeSketcher : ", CurvesOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Create 3D Primitives
-# -----------------------------------------------------------------------------
-
-## Create a box by coordinates of two opposite vertices.
-#
-# Example: see GEOM_TestAll.py
-def MakeBox(x1,y1,z1,x2,y2,z2):
- pnt1 = MakeVertex(x1,y1,z1)
- pnt2 = MakeVertex(x2,y2,z2)
- return MakeBoxTwoPnt(pnt1,pnt2)
-
-## Create a box with specified dimensions along the coordinate axes
-# and with edges, parallel to the coordinate axes.
-# Center of the box will be at point (DX/2, DY/2, DZ/2).
-# @param theDX Length of Box edges, parallel to OX axis.
-# @param theDY Length of Box edges, parallel to OY axis.
-# @param theDZ Length of Box edges, parallel to OZ axis.
-# @return New GEOM_Object, containing the created box.
-#
-# Example: see GEOM_TestAll.py
-def MakeBoxDXDYDZ(theDX, theDY, theDZ):
- anObj = PrimOp.MakeBoxDXDYDZ(theDX, theDY, theDZ)
- if PrimOp.IsDone() == 0:
- print "MakeBoxDXDYDZ : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a box with two specified opposite vertices,
-# and with edges, parallel to the coordinate axes
-# @param thePnt1 First of two opposite vertices.
-# @param thePnt2 Second of two opposite vertices.
-# @return New GEOM_Object, containing the created box.
-#
-# Example: see GEOM_TestAll.py
-def MakeBoxTwoPnt(thePnt1, thePnt2):
- anObj = PrimOp.MakeBoxTwoPnt(thePnt1, thePnt2)
- if PrimOp.IsDone() == 0:
- print "MakeBoxTwoPnt : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a cylinder with given base point, axis, radius and height.
-# @param thePnt Central point of cylinder base.
-# @param theAxis Cylinder axis.
-# @param theR Cylinder radius.
-# @param theH Cylinder height.
-# @return New GEOM_Object, containing the created cylinder.
-#
-# Example: see GEOM_TestAll.py
-def MakeCylinder(thePnt, theAxis, theR, theH):
- anObj = PrimOp.MakeCylinderPntVecRH(thePnt, theAxis, theR, theH)
- if PrimOp.IsDone() == 0:
- print "MakeCylinderPntVecRH : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a cylinder with given radius and height at
-# the origin of coordinate system. Axis of the cylinder
-# will be collinear to the OZ axis of the coordinate system.
-# @param theR Cylinder radius.
-# @param theH Cylinder height.
-# @return New GEOM_Object, containing the created cylinder.
-#
-# Example: see GEOM_TestAll.py
-def MakeCylinderRH(theR, theH):
- anObj = PrimOp.MakeCylinderRH(theR, theH)
- if PrimOp.IsDone() == 0:
- print "MakeCylinderRH : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a sphere with given center and radius.
-# @param thePnt Sphere center.
-# @param theR Sphere radius.
-# @return New GEOM_Object, containing the created sphere.
-#
-# Example: see GEOM_TestAll.py
-def MakeSpherePntR(thePnt, theR):
- anObj = PrimOp.MakeSpherePntR(thePnt, theR)
- if PrimOp.IsDone() == 0:
- print "MakeSpherePntR : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a sphere with given center and radius.
-# @param x,y,z Coordinates of sphere center.
-# @param theR Sphere radius.
-# @return New GEOM_Object, containing the created sphere.
-#
-# Example: see GEOM_TestAll.py
-def MakeSphere(x, y, z, theR):
- point = MakeVertex(x, y, z)
- anObj = MakeSpherePntR(point, theR)
- return anObj
-
-## Create a sphere with given radius at the origin of coordinate system.
-# @param theR Sphere radius.
-# @return New GEOM_Object, containing the created sphere.
-#
-# Example: see GEOM_TestAll.py
-def MakeSphereR(theR):
- anObj = PrimOp.MakeSphereR(theR)
- if PrimOp.IsDone() == 0:
- print "MakeSphereR : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a cone with given base point, axis, height and radiuses.
-# @param thePnt Central point of the first cone base.
-# @param theAxis Cone axis.
-# @param theR1 Radius of the first cone base.
-# @param theR2 Radius of the second cone base.
-# \note If both radiuses are non-zero, the cone will be truncated.
-# \note If the radiuses are equal, a cylinder will be created instead.
-# @param theH Cone height.
-# @return New GEOM_Object, containing the created cone.
-#
-# Example: see GEOM_TestAll.py
-def MakeCone(thePnt, theAxis, theR1, theR2, theH):
- anObj = PrimOp.MakeConePntVecR1R2H(thePnt, theAxis, theR1, theR2, theH)
- if PrimOp.IsDone() == 0:
- print "MakeConePntVecR1R2H : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a cone with given height and radiuses at
-# the origin of coordinate system. Axis of the cone will
-# be collinear to the OZ axis of the coordinate system.
-# @param theR1 Radius of the first cone base.
-# @param theR2 Radius of the second cone base.
-# \note If both radiuses are non-zero, the cone will be truncated.
-# \note If the radiuses are equal, a cylinder will be created instead.
-# @param theH Cone height.
-# @return New GEOM_Object, containing the created cone.
-#
-# Example: see GEOM_TestAll.py
-def MakeConeR1R2H(theR1, theR2, theH):
- anObj = PrimOp.MakeConeR1R2H(theR1, theR2, theH)
- if PrimOp.IsDone() == 0:
- print "MakeConeR1R2H : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a torus with given center, normal vector and radiuses.
-# @param thePnt Torus central point.
-# @param theVec Torus axis of symmetry.
-# @param theRMajor Torus major radius.
-# @param theRMinor Torus minor radius.
-# @return New GEOM_Object, containing the created torus.
-#
-# Example: see GEOM_TestAll.py
-def MakeTorus(thePnt, theVec, theRMajor, theRMinor):
- anObj = PrimOp.MakeTorusPntVecRR(thePnt, theVec, theRMajor, theRMinor)
- if PrimOp.IsDone() == 0:
- print "MakeTorusPntVecRR : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a torus with given radiuses at the origin of coordinate system.
-# @param theRMajor Torus major radius.
-# @param theRMinor Torus minor radius.
-# @return New GEOM_Object, containing the created torus.
-#
-# Example: see GEOM_TestAll.py
-def MakeTorusRR(theRMajor, theRMinor):
- anObj = PrimOp.MakeTorusRR(theRMajor, theRMinor)
- if PrimOp.IsDone() == 0:
- print "MakeTorusRR : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a shape by extrusion of the base shape along a vector, defined by two points.
-# @param theBase Base shape to be extruded.
-# @param thePoint1 First end of extrusion vector.
-# @param thePoint2 Second end of extrusion vector.
-# @return New GEOM_Object, containing the created prism.
-#
-# Example: see GEOM_TestAll.py
-def MakePrism(theBase, thePoint1, thePoint2):
- anObj = PrimOp.MakePrismTwoPnt(theBase, thePoint1, thePoint2)
- if PrimOp.IsDone() == 0:
- print "MakePrismTwoPnt : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a shape by extrusion of the base shape along the vector,
-# i.e. all the space, transfixed by the base shape during its translation
-# along the vector on the given distance.
-# @param theBase Base shape to be extruded.
-# @param theVec Direction of extrusion.
-# @param theH Prism dimension along theVec.
-# @return New GEOM_Object, containing the created prism.
-#
-# Example: see GEOM_TestAll.py
-def MakePrismVecH(theBase, theVec, theH):
- anObj = PrimOp.MakePrismVecH(theBase, theVec, theH)
- if PrimOp.IsDone() == 0:
- print "MakePrismVecH : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a shape by extrusion of the base shape along
-# the path shape. The path shape can be a wire or an edge.
-# @param theBase Base shape to be extruded.
-# @param thePath Path shape to extrude the base shape along it.
-# @return New GEOM_Object, containing the created pipe.
-#
-# Example: see GEOM_TestAll.py
-def MakePipe(theBase, thePath):
- anObj = PrimOp.MakePipe(theBase, thePath)
- if PrimOp.IsDone() == 0:
- print "MakePipe : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a shape by revolution of the base shape around the axis
-# on the given angle, i.e. all the space, transfixed by the base
-# shape during its rotation around the axis on the given angle.
-# @param theBase Base shape to be rotated.
-# @param theAxis Rotation axis.
-# @param theAngle Rotation angle in radians.
-# @return New GEOM_Object, containing the created revolution.
-#
-# Example: see GEOM_TestAll.py
-def MakeRevolution(theBase, theAxis, theAngle):
- anObj = PrimOp.MakeRevolutionAxisAngle(theBase, theAxis, theAngle)
- if PrimOp.IsDone() == 0:
- print "MakeRevolutionAxisAngle : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a shell or solid passing through set of sections.Sections should be wires,edges or vertices.
-# @param theSeqSections - set of specified sections.
-# @param theModeSolid - mode defining building solid or shell
-# @param thePreci - precision 3D used for smoothing by default 1.e-6
-# @param theRuled - mode defining type of the result surfaces (ruled or smoothed).
-# @return New GEOM_Object, containing the created shell or solid.
-#
-# Example: see GEOM_TestAll.py
-def MakeThruSections(theSeqSections,theModeSolid,thePreci,theRuled):
- anObj = PrimOp.MakeThruSections(theSeqSections,theModeSolid,thePreci,theRuled)
- if PrimOp.IsDone() == 0:
- print "MakeThruSections : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a shape by extrusion of the profile shape along
-# the path shape. The path shape can be a wire or an edge.
-# the several profiles can be specified in the several locations of path.
-# @param theSeqBases - list of Bases shape to be extruded.
-# @param theLocations - list of locations on the path corresponding
-# specified list of the Bases shapes. Number of locations
-# should be equal to number of bases or list of locations can be empty.
-# @param thePath - Path shape to extrude the base shape along it.
-# @param theWithContact - the mode defining that the section is translated to be in
-# contact with the spine.
-# @param - WithCorrection - defining that the section is rotated to be
-# orthogonal to the spine tangent in the correspondent point
-# @return New GEOM_Object, containing the created pipe.
-#
-# Example: see GEOM_TestAll.py
-def MakePipeWithDifferentSections(theSeqBases, theLocations,thePath,theWithContact,theWithCorrection):
- anObj = PrimOp.MakePipeWithDifferentSections(theSeqBases, theLocations,thePath,theWithContact,theWithCorrection)
- if PrimOp.IsDone() == 0:
- print "MakePipeWithDifferentSections : ", PrimOp.GetErrorCode()
- return anObj
-
-## Create a shape by extrusion of the profile shape along
-# the path shape. The path shape can be a shell or a face.
-# the several profiles can be specified in the several locations of path.
-# @param theSeqBases - list of Bases shape to be extruded.
-# @param theSeqSubBases - list of corresponding subshapes of section shapes.
-# @param theLocations - list of locations on the path corresponding
-# specified list of the Bases shapes. Number of locations
-# should be equal to number of bases or list of locations can be empty.
-# @param thePath - Path shape to extrude the base shape along it.
-# @param theWithContact - the mode defining that the section is translated to be in
-# contact with the spine.
-# @param - WithCorrection - defining that the section is rotated to be
-# orthogonal to the spine tangent in the correspondent point
-# @return New GEOM_Object, containing the created solids.
-#
-# Example: see GEOM_TestAll.py
-def MakePipeWithShellSections(theSeqBases, theSeqSubBases,
- theLocations, thePath,
- theWithContact, theWithCorrection):
- anObj = PrimOp.MakePipeWithShellSections(theSeqBases, theSeqSubBases,
- theLocations, thePath,
- theWithContact, theWithCorrection)
- if PrimOp.IsDone() == 0:
- print "MakePipeWithShellSections : ", PrimOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Create base shapes
-# -----------------------------------------------------------------------------
-
-## Create a linear edge with specified ends.
-# @param thePnt1 Point for the first end of edge.
-# @param thePnt2 Point for the second end of edge.
-# @return New GEOM_Object, containing the created edge.
-#
-# Example: see GEOM_TestAll.py
-def MakeEdge(thePnt1, thePnt2):
- anObj = ShapesOp.MakeEdge(thePnt1, thePnt2)
- if ShapesOp.IsDone() == 0:
- print "MakeEdge : ", ShapesOp.GetErrorCode()
- return anObj
-
-## Create a wire from the set of edges and wires.
-# @param theEdgesAndWires List of edges and/or wires.
-# @return New GEOM_Object, containing the created wire.
-#
-# Example: see GEOM_TestAll.py
-def MakeWire(theEdgesAndWires):
- anObj = ShapesOp.MakeWire(theEdgesAndWires)
- if ShapesOp.IsDone() == 0:
- print "MakeWire : ", ShapesOp.GetErrorCode()
- return anObj
-
-## Create a face on the given wire.
-# @param theWire closed Wire or Edge to build the face on.
-# @param isPlanarWanted If TRUE, only planar face will be built.
-# If impossible, NULL object will be returned.
-# @return New GEOM_Object, containing the created face.
-#
-# Example: see GEOM_TestAll.py
-def MakeFace(theWire, isPlanarWanted):
- anObj = ShapesOp.MakeFace(theWire, isPlanarWanted)
- if ShapesOp.IsDone() == 0:
- print "MakeFace : ", ShapesOp.GetErrorCode()
- return anObj
-
-## Create a face on the given wires set.
-# @param theWires List of closed wires or edges to build the face on.
-# @param isPlanarWanted If TRUE, only planar face will be built.
-# If impossible, NULL object will be returned.
-# @return New GEOM_Object, containing the created face.
-#
-# Example: see GEOM_TestAll.py
-def MakeFaceWires(theWires, isPlanarWanted):
- anObj = ShapesOp.MakeFaceWires(theWires, isPlanarWanted)
- if ShapesOp.IsDone() == 0:
- print "MakeFaceWires : ", ShapesOp.GetErrorCode()
- return anObj
-
-## Shortcut to MakeFaceWires()
-#
-# Example: see GEOM_TestOthers.py
-def MakeFaces(theWires, isPlanarWanted):
- anObj = MakeFaceWires(theWires, isPlanarWanted)
- return anObj
-
-## Create a shell from the set of faces and shells.
-# @param theFacesAndShells List of faces and/or shells.
-# @return New GEOM_Object, containing the created shell.
-#
-# Example: see GEOM_TestAll.py
-def MakeShell(theFacesAndShells):
- anObj = ShapesOp.MakeShell(theFacesAndShells)
- if ShapesOp.IsDone() == 0:
- print "MakeShell : ", ShapesOp.GetErrorCode()
- return anObj
-
-## Create a solid, bounded by the given shells.
-# @param theShells Sequence of bounding shells.
-# @return New GEOM_Object, containing the created solid.
-#
-# Example: see GEOM_TestAll.py
-def MakeSolid(theShells):
- anObj = ShapesOp.MakeSolidShells(theShells)
- if ShapesOp.IsDone() == 0:
- print "MakeSolid : ", ShapesOp.GetErrorCode()
- return anObj
-
-## Create a compound of the given shapes.
-# @param theShapes List of shapes to put in compound.
-# @return New GEOM_Object, containing the created compound.
-#
-# Example: see GEOM_TestAll.py
-def MakeCompound(theShapes):
- anObj = ShapesOp.MakeCompound(theShapes)
- if ShapesOp.IsDone() == 0:
- print "MakeCompound : ", ShapesOp.GetErrorCode()
- return anObj
-
-## Gives quantity of faces in the given shape.
-# @param theShape Shape to count faces of.
-# @return Quantity of faces.
-#
-# Example: see GEOM_TestOthers.py
-def NumberOfFaces(theShape):
- nb_faces = ShapesOp.NumberOfFaces(theShape)
- if ShapesOp.IsDone() == 0:
- print "NumberOfFaces : ", ShapesOp.GetErrorCode()
- return nb_faces
-
-## Gives quantity of edges in the given shape.
-# @param theShape Shape to count edges of.
-# @return Quantity of edges.
-#
-# Example: see GEOM_TestOthers.py
-def NumberOfEdges(theShape):
- nb_edges = ShapesOp.NumberOfEdges(theShape)
- if ShapesOp.IsDone() == 0:
- print "NumberOfEdges : ", ShapesOp.GetErrorCode()
- return nb_edges
-
-## Reverses an orientation the given shape.
-# @param theShape Shape to be reversed.
-# @return The reversed copy of theShape.
-#
-# Example: see GEOM_TestAll.py
-def ChangeOrientation(theShape):
- anObj = ShapesOp.ChangeOrientation(theShape)
- if ShapesOp.IsDone() == 0:
- print "ChangeOrientation : ", ShapesOp.GetErrorCode()
- return anObj
-
-## Shortcut to ChangeOrientation()
-#
-# Example: see GEOM_TestOthers.py
-def OrientationChange(theShape):
- anObj = ChangeOrientation(theShape)
- return anObj
-
-## Retrieve all free faces from the given shape.
-# Free face is a face, which is not shared between two shells of the shape.
-# @param theShape Shape to find free faces in.
-# @return List of IDs of all free faces, contained in theShape.
-#
-# Example: see GEOM_TestOthers.py
-def GetFreeFacesIDs(theShape):
- anIDs = ShapesOp.GetFreeFacesIDs(theShape)
- if ShapesOp.IsDone() == 0:
- print "GetFreeFacesIDs : ", ShapesOp.GetErrorCode()
- return anIDs
-
-## Get all sub-shapes of theShape1 of the given type, shared with theShape2.
-# @param theShape1 Shape to find sub-shapes in.
-# @param theShape2 Shape to find shared sub-shapes with.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @return List of sub-shapes of theShape1, shared with theShape2.
-#
-# Example: see GEOM_TestOthers.py
-def GetSharedShapes(theShape1, theShape2, theShapeType):
- aList = ShapesOp.GetSharedShapes(theShape1, theShape2, theShapeType)
- if ShapesOp.IsDone() == 0:
- print "GetSharedShapes : ", ShapesOp.GetErrorCode()
- return aList
-
-## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
-# the specified plane by the certain way, defined through \a theState parameter.
-# @param theShape Shape to find sub-shapes of.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @param theAx1 Vector (or line, or linear edge), specifying normal
-# direction and location of the plane to find shapes on.
-# @param theState The state of the subshapes to find. It can be one of
-# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
-# @return List of all found sub-shapes.
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnPlane(theShape, theShapeType, theAx1, theState):
- aList = ShapesOp.GetShapesOnPlane(theShape, theShapeType, theAx1, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnPlane : ", ShapesOp.GetErrorCode()
- return aList
-
-## Works like the above method, but returns list of sub-shapes indices
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnPlaneIDs(theShape, theShapeType, theAx1, theState):
- aList = ShapesOp.GetShapesOnPlaneIDs(theShape, theShapeType, theAx1, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnPlaneIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
-# the specified plane by the certain way, defined through \a theState parameter.
-# @param theShape Shape to find sub-shapes of.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @param theAx1 Vector (or line, or linear edge), specifying normal
-# direction of the plane to find shapes on.
-# @param thePnt Point specifying location of the plane to find shapes on.
-# @param theState The state of the subshapes to find. It can be one of
-# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
-# @return List of all found sub-shapes.
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnPlaneWithLocation(theShape, theShapeType, theAx1, thePnt, theState):
- aList = ShapesOp.GetShapesOnPlaneWithLocation(theShape, theShapeType, theAx1, thePnt, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnPlaneWithLocation : ", ShapesOp.GetErrorCode()
- return aList
-
-## Works like the above method, but returns list of sub-shapes indices
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnPlaneWithLocationIDs(theShape, theShapeType, theAx1, thePnt, theState):
- aList = ShapesOp.GetShapesOnPlaneWithLocationIDs(theShape, theShapeType, theAx1, thePnt, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnPlaneWithLocationIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
-# the specified cylinder by the certain way, defined through \a theState parameter.
-# @param theShape Shape to find sub-shapes of.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @param theAxis Vector (or line, or linear edge), specifying
-# axis of the cylinder to find shapes on.
-# @param theRadius Radius of the cylinder to find shapes on.
-# @param theState The state of the subshapes to find. It can be one of
-# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
-# @return List of all found sub-shapes.
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnCylinder(theShape, theShapeType, theAxis, theRadius, theState):
- aList = ShapesOp.GetShapesOnCylinder(theShape, theShapeType, theAxis, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnCylinder : ", ShapesOp.GetErrorCode()
- return aList
-
-## Works like the above method, but returns list of sub-shapes indices
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnCylinderIDs(theShape, theShapeType, theAxis, theRadius, theState):
- aList = ShapesOp.GetShapesOnCylinderIDs(theShape, theShapeType, theAxis, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnCylinderIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
-# the specified sphere by the certain way, defined through \a theState parameter.
-# @param theShape Shape to find sub-shapes of.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @param theCenter Point, specifying center of the sphere to find shapes on.
-# @param theRadius Radius of the sphere to find shapes on.
-# @param theState The state of the subshapes to find. It can be one of
-# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
-# @return List of all found sub-shapes.
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnSphere(theShape, theShapeType, theCenter, theRadius, theState):
- aList = ShapesOp.GetShapesOnSphere(theShape, theShapeType, theCenter, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnSphere : ", ShapesOp.GetErrorCode()
- return aList
-
-## Works like the above method, but returns list of sub-shapes indices
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnSphereIDs(theShape, theShapeType, theCenter, theRadius, theState):
- aList = ShapesOp.GetShapesOnSphereIDs(theShape, theShapeType, theCenter, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnSphereIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
-# the specified quadrangle by the certain way, defined through \a theState parameter.
-# @param theShape Shape to find sub-shapes of.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @param theTopLeftPoint Point, specifying top left corner of a quadrangle
-# @param theTopRigthPoint Point, specifying top right corner of a quadrangle
-# @param theBottomLeftPoint Point, specifying bottom left corner of a quadrangle
-# @param theBottomRigthPoint Point, specifying bottom right corner of a quadrangle
-# @param theState The state of the subshapes to find. It can be one of
-# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
-# @return List of all found sub-shapes.
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnQuadrangle(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState):
- aList = ShapesOp.GetShapesOnQuadrangle(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnQuadrangle : ", ShapesOp.GetErrorCode()
- return aList
-
-## Works like the above method, but returns list of sub-shapes indices
-#
-# Example: see GEOM_TestOthers.py
-def GetShapesOnQuadrangleIDs(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState):
- aList = ShapesOp.GetShapesOnQuadrangleIDs(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnQuadrangleIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
-# the specified \a theBox by the certain way, defined through \a theState parameter.
-# @param theBox Shape for relative comparing.
-# @param theShape Shape to find sub-shapes of.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @param theState The state of the subshapes to find. It can be one of
-# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
-# @return List of all found sub-shapes.
-#
-def GetShapesOnBox(theBox, theShape, theShapeType, theState):
- aList = ShapesOp.GetShapesOnBox(theBox, theShape, theShapeType, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnBox : ", ShapesOp.GetErrorCode()
- return aList
-
-## Works like the above method, but returns list of sub-shapes indices
-#
-def GetShapesOnBoxIDs(theBox, theShape, theShapeType, theState):
- aList = ShapesOp.GetShapesOnBoxIDs(theBox, theShape, theShapeType, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnBoxIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-## Get sub-shape(s) of theShapeWhere, which are
-# coincident with \a theShapeWhat or could be a part of it.
-# @param theShapeWhere Shape to find sub-shapes of.
-# @param theShapeWhat Shape, specifying what to find.
-# @return Group of all found sub-shapes or a single found sub-shape.
-#
-# Example: see GEOM_TestOthers.py
-def GetInPlace(theShapeWhere, theShapeWhat):
- anObj = ShapesOp.GetInPlace(theShapeWhere, theShapeWhat)
- if ShapesOp.IsDone() == 0:
- print "GetInPlace : ", ShapesOp.GetErrorCode()
- return anObj
-
-## Get sub-shape of theShapeWhere, which is
-# equal to \a theShapeWhat.
-# @param theShapeWhere Shape to find sub-shape of.
-# @param theShapeWhat Shape, specifying what to find.
-# @return New GEOM_Object for found sub-shape.
-#
-def GetSame(theShapeWhere, theShapeWhat):
- anObj = ShapesOp.GetSame(theShapeWhere, theShapeWhat)
- if ShapesOp.IsDone() == 0:
- print "GetSame : ", ShapesOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Access to sub-shapes by their unique IDs inside the main shape.
-# -----------------------------------------------------------------------------
-
-## Obtain a composite sub-shape of <aShape>, composed from sub-shapes
-# of <aShape>, selected by their unique IDs inside <aShape>
-#
-# Example: see GEOM_TestAll.py
-def GetSubShape(aShape, ListOfID):
- anObj = geom.AddSubShape(aShape,ListOfID)
- return anObj
-
-## Obtain unique ID of sub-shape <aSubShape> inside <aShape>
-#
-# Example: see GEOM_TestAll.py
-def GetSubShapeID(aShape, aSubShape):
- anID = LocalOp.GetSubShapeIndex(aShape, aSubShape)
- if LocalOp.IsDone() == 0:
- print "GetSubShapeIndex : ", LocalOp.GetErrorCode()
- return anID
-
-# -----------------------------------------------------------------------------
-# Decompose objects
-# -----------------------------------------------------------------------------
-
-## Explode a shape on subshapes of a given type.
-# @param theShape Shape to be exploded.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @return List of sub-shapes of type theShapeType, contained in theShape.
-#
-# Example: see GEOM_TestAll.py
-def SubShapeAll(aShape, aType):
- ListObj = ShapesOp.MakeExplode(aShape,aType,0)
- if ShapesOp.IsDone() == 0:
- print "MakeExplode : ", ShapesOp.GetErrorCode()
- return ListObj
-
-## Explode a shape on subshapes of a given type.
-# @param theShape Shape to be exploded.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @return List of IDs of sub-shapes.
-def SubShapeAllIDs(aShape, aType):
- ListObj = ShapesOp.SubShapeAllIDs(aShape,aType,0)
- if ShapesOp.IsDone() == 0:
- print "SubShapeAllIDs : ", ShapesOp.GetErrorCode()
- return ListObj
-
-## Explode a shape on subshapes of a given type.
-# Sub-shapes will be sorted by coordinates of their gravity centers.
-# @param theShape Shape to be exploded.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @return List of sub-shapes of type theShapeType, contained in theShape.
-#
-# Example: see GEOM_TestAll.py
-def SubShapeAllSorted(aShape, aType):
- ListObj = ShapesOp.MakeExplode(aShape,aType,1)
- if ShapesOp.IsDone() == 0:
- print "MakeExplode : ", ShapesOp.GetErrorCode()
- return ListObj
-
-## Explode a shape on subshapes of a given type.
-# Sub-shapes will be sorted by coordinates of their gravity centers.
-# @param theShape Shape to be exploded.
-# @param theShapeType Type of sub-shapes to be retrieved.
-# @return List of IDs of sub-shapes.
-def SubShapeAllSortedIDs(aShape, aType):
- ListIDs = ShapesOp.SubShapeAllIDs(aShape,aType,1)
- if ShapesOp.IsDone() == 0:
- print "SubShapeAllSortedIDs : ", ShapesOp.GetErrorCode()
- return ListIDs
-
-## Obtain a compound of sub-shapes of <aShape>,
-# selected by they indices in list of all sub-shapes of type <aType>.
-# Each index is in range [1, Nb_Sub-Shapes_Of_Given_Type]
-#
-# Example: see GEOM_TestAll.py
-def SubShape(aShape, aType, ListOfInd):
- ListOfIDs = []
- AllShapeList = SubShapeAll(aShape, aType)
- for ind in ListOfInd:
- ListOfIDs.append(GetSubShapeID(aShape, AllShapeList[ind - 1]))
- anObj = GetSubShape(aShape, ListOfIDs)
- return anObj
-
-## Obtain a compound of sub-shapes of <aShape>,
-# selected by they indices in sorted list of all sub-shapes of type <aType>.
-# Each index is in range [1, Nb_Sub-Shapes_Of_Given_Type]
-#
-# Example: see GEOM_TestAll.py
-def SubShapeSorted(aShape, aType, ListOfInd):
- ListOfIDs = []
- AllShapeList = SubShapeAllSorted(aShape, aType)
- for ind in ListOfInd:
- ListOfIDs.append(GetSubShapeID(aShape, AllShapeList[ind - 1]))
- anObj = GetSubShape(aShape, ListOfIDs)
- return anObj
-
-# -----------------------------------------------------------------------------
-# Healing operations
-# -----------------------------------------------------------------------------
-
-## Apply a sequence of Shape Healing operators to the given object.
-# @param theShape Shape to be processed.
-# @param theOperators List of names of operators ("FixShape", "SplitClosedFaces", etc.).
-# @param theParameters List of names of parameters
-# ("FixShape.Tolerance3d", "SplitClosedFaces.NbSplitPoints", etc.).
-# @param theValues List of values of parameters, in the same order
-# as parameters are listed in \a theParameters list.
-# @return New GEOM_Object, containing processed shape.
-#
-# Example: see GEOM_TestHealing.py
-def ProcessShape(theShape, theOperators, theParameters, theValues):
- anObj = HealOp.ProcessShape(theShape, theOperators, theParameters, theValues)
- if HealOp.IsDone() == 0:
- print "ProcessShape : ", HealOp.GetErrorCode()
- return anObj
-
-## Remove faces from the given object (shape).
-# @param theObject Shape to be processed.
-# @param theFaces Indices of faces to be removed, if EMPTY then the method
-# removes ALL faces of the given object.
-# @return New GEOM_Object, containing processed shape.
-#
-# Example: see GEOM_TestHealing.py
-def SuppressFaces(theObject, theFaces):
- anObj = HealOp.SuppressFaces(theObject, theFaces)
- if HealOp.IsDone() == 0:
- print "SuppressFaces : ", HealOp.GetErrorCode()
- return anObj
-
-## Sewing of some shapes into single shape.
-#
-# Example: see GEOM_TestHealing.py
-def MakeSewing(ListShape, theTolerance):
- comp = MakeCompound(ListShape)
- anObj = Sew(comp, theTolerance)
- return anObj
-
-## Sewing of the given object.
-# @param theObject Shape to be processed.
-# @param theTolerance Required tolerance value.
-# @return New GEOM_Object, containing processed shape.
-#
-# Example: see MakeSewing() above
-def Sew(theObject, theTolerance):
- anObj = HealOp.Sew(theObject, theTolerance)
- if HealOp.IsDone() == 0:
- print "Sew : ", HealOp.GetErrorCode()
- return anObj
-
-## Remove internal wires and edges from the given object (face).
-# @param theObject Shape to be processed.
-# @param theWires Indices of wires to be removed, if EMPTY then the method
-# removes ALL internal wires of the given object.
-# @return New GEOM_Object, containing processed shape.
-#
-# Example: see GEOM_TestHealing.py
-def SuppressInternalWires(theObject, theWires):
- anObj = HealOp.RemoveIntWires(theObject, theWires)
- if HealOp.IsDone() == 0:
- print "SuppressInternalWires : ", HealOp.GetErrorCode()
- return anObj
-
-## Remove internal closed contours (holes) from the given object.
-# @param theObject Shape to be processed.
-# @param theWires Indices of wires to be removed, if EMPTY then the method
-# removes ALL internal holes of the given object
-# @return New GEOM_Object, containing processed shape.
-#
-# Example: see GEOM_TestHealing.py
-def SuppressHoles(theObject, theWires):
- anObj = HealOp.FillHoles(theObject, theWires)
- if HealOp.IsDone() == 0:
- print "SuppressHoles : ", HealOp.GetErrorCode()
- return anObj
-
-## Close an open wire.
-# @param theObject Shape to be processed.
-# @param theWires Indexes of edge(s) and wire(s) to be closed within <VAR>theObject</VAR>'s shape,
-# if -1, then theObject itself is a wire.
-# @param isCommonVertex If TRUE : closure by creation of a common vertex,
-# If FALS : closure by creation of an edge between ends.
-# @return New GEOM_Object, containing processed shape.
-#
-# Example: see GEOM_TestHealing.py
-def CloseContour(theObject, theWires, isCommonVertex):
- anObj = HealOp.CloseContour(theObject, theWires, isCommonVertex)
- if HealOp.IsDone() == 0:
- print "CloseContour : ", HealOp.GetErrorCode()
- return anObj
-
-## Addition of a point to a given edge object.
-# @param theObject Shape to be processed.
-# @param theEdgeIndex Index of edge to be divided within theObject's shape,
-# if -1, then theObject itself is the edge.
-# @param theValue Value of parameter on edge or length parameter,
-# depending on \a isByParameter.
-# @param isByParameter If TRUE : \a theValue is treated as a curve parameter [0..1],
-# if FALSE : \a theValue is treated as a length parameter [0..1]
-# @return New GEOM_Object, containing processed shape.
-#
-# Example: see GEOM_TestHealing.py
-def DivideEdge(theObject, theEdgeIndex, theValue, isByParameter):
- anObj = HealOp.DivideEdge(theObject, theEdgeIndex, theValue, isByParameter)
- if HealOp.IsDone() == 0:
- print "DivideEdge : ", HealOp.GetErrorCode()
- return anObj
-
-## Change orientation of the given object.
-# @param theObject Shape to be processed.
-# @update given shape
-def ChangeOrientationShell(theObject):
- theObject = HealOp.ChangeOrientation(theObject)
- if HealOp.IsDone() == 0:
- print "ChangeOrientation : ", HealOp.GetErrorCode()
-
-## Change orientation of the given object.
-# @param theObject Shape to be processed.
-# @return New GEOM_Object, containing processed shape.
-def ChangeOrientationShellCopy(theObject):
- anObj = HealOp.ChangeOrientationCopy(theObject)
- if HealOp.IsDone() == 0:
- print "ChangeOrientation : ", HealOp.GetErrorCode()
- return anObj
-
-## Get a list of wires (wrapped in GEOM_Object-s),
-# that constitute a free boundary of the given shape.
-# @param theObject Shape to get free boundary of.
-# @return [status, theClosedWires, theOpenWires]
-# status: FALSE, if an error(s) occured during the method execution.
-# theClosedWires: Closed wires on the free boundary of the given shape.
-# theOpenWires: Open wires on the free boundary of the given shape.
-#
-# Example: see GEOM_TestHealing.py
-def GetFreeBoundary(theObject):
- anObj = HealOp.GetFreeBoundary(theObject)
- if HealOp.IsDone() == 0:
- print "GetFreeBoundaries : ", HealOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Create advanced objects
-# -----------------------------------------------------------------------------
-
-## Create a copy of the given object
-#
-# Example: see GEOM_TestAll.py
-def MakeCopy(theOriginal):
- anObj = InsertOp.MakeCopy(theOriginal)
- if InsertOp.IsDone() == 0:
- print "MakeCopy : ", InsertOp.GetErrorCode()
- return anObj
-
-## Create a filling from the given compound of contours.
-# @param theShape the compound of contours
-# @param theMinDeg a minimal degree
-# @param theMaxDeg a maximal degree
-# @param theTol2D a 2d tolerance
-# @param theTol3D a 3d tolerance
-# @param theNbIter a number of iteration
-# @return New GEOM_Object, containing the created filling surface.
-#
-# Example: see GEOM_TestAll.py
-def MakeFilling(theShape, theMinDeg, theMaxDeg, theTol2D, theTol3D, theNbIter):
- anObj = PrimOp.MakeFilling(theShape, theMinDeg, theMaxDeg, theTol2D, theTol3D, theNbIter)
- if PrimOp.IsDone() == 0:
- print "MakeFilling : ", PrimOp.GetErrorCode()
- return anObj
-
-## Replace coincident faces in theShape by one face.
-# @param theShape Initial shape.
-# @param theTolerance Maximum distance between faces, which can be considered as coincident.
-# @return New GEOM_Object, containing a copy of theShape without coincident faces.
-#
-# Example: see GEOM_Spanner.py
-def MakeGlueFaces(theShape, theTolerance):
- anObj = ShapesOp.MakeGlueFaces(theShape, theTolerance)
- if ShapesOp.IsDone() == 0:
- print "MakeGlueFaces : ", ShapesOp.GetErrorCode()
- return anObj
-
-
-## Find coincident faces in theShape for possible gluing.
-# @param theShape Initial shape.
-# @param theTolerance Maximum distance between faces,
-# which can be considered as coincident.
-# @return ListOfGO.
-#
-# Example: see GEOM_Spanner.py
-def GetGlueFaces(theShape, theTolerance):
- anObj = ShapesOp.GetGlueFaces(theShape, theTolerance)
- if ShapesOp.IsDone() == 0:
- print "GetGlueFaces : ", ShapesOp.GetErrorCode()
- return anObj
-
-
-## Replace coincident faces in theShape by one face
-# in compliance with given list of faces
-# @param theShape Initial shape.
-# @param theTolerance Maximum distance between faces,
-# which can be considered as coincident.
-# @param theFaces List of faces for gluing.
-# @return New GEOM_Object, containing a copy of theShape
-# without some faces.
-#
-# Example: see GEOM_Spanner.py
-def MakeGlueFacesByList(theShape, theTolerance, theFaces):
- anObj = ShapesOp.MakeGlueFacesByList(theShape, theTolerance, theFaces)
- if ShapesOp.IsDone() == 0:
- print "MakeGlueFacesByList : ", ShapesOp.GetErrorCode()
- return anObj
-
-
-# -----------------------------------------------------------------------------
-# Boolean (Common, Cut, Fuse, Section)
-# -----------------------------------------------------------------------------
-
-## Perform one of boolean operations on two given shapes.
-# @param theShape1 First argument for boolean operation.
-# @param theShape2 Second argument for boolean operation.
-# @param theOperation Indicates the operation to be done:
-# 1 - Common, 2 - Cut, 3 - Fuse, 4 - Section.
-# @return New GEOM_Object, containing the result shape.
-#
-# Example: see GEOM_TestAll.py
-def MakeBoolean(theShape1, theShape2, theOperation):
- anObj = BoolOp.MakeBoolean(theShape1, theShape2, theOperation)
- if BoolOp.IsDone() == 0:
- print "MakeBoolean : ", BoolOp.GetErrorCode()
- return anObj
-
-## Shortcut to MakeBoolean(s1, s2, 1)
-#
-# Example: see GEOM_TestOthers.py
-def MakeCommon(s1, s2):
- return MakeBoolean(s1, s2, 1)
-
-## Shortcut to MakeBoolean(s1, s2, 2)
-#
-# Example: see GEOM_TestOthers.py
-def MakeCut(s1, s2):
- return MakeBoolean(s1, s2, 2)
-
-## Shortcut to MakeBoolean(s1, s2, 3)
-#
-# Example: see GEOM_TestOthers.py
-def MakeFuse(s1, s2):
- return MakeBoolean(s1, s2, 3)
-
-## Shortcut to MakeBoolean(s1, s2, 4)
-#
-# Example: see GEOM_TestOthers.py
-def MakeSection(s1, s2):
- return MakeBoolean(s1, s2, 4)
-
-## Perform partition operation.
-# @param ListShapes Shapes to be intersected.
-# @param ListTools Shapes to intersect theShapes.
-# !!!NOTE: Each compound from ListShapes and ListTools will be exploded
-# in order to avoid possible intersection between shapes from
-# this compound.
-# @param Limit Type of resulting shapes (corresponding to TopAbs_ShapeEnum).
-#
-# After implementation new version of PartitionAlgo (October 2006)
-# other parameters are ignored by current functionality. They are kept
-# in this function only for support old versions.
-# Ignored parameters:
-# @param ListKeepInside Shapes, outside which the results will be deleted.
-# Each shape from theKeepInside must belong to theShapes also.
-# @param ListRemoveInside Shapes, inside which the results will be deleted.
-# Each shape from theRemoveInside must belong to theShapes also.
-# @param RemoveWebs If TRUE, perform Glue 3D algorithm.
-# @param ListMaterials Material indices for each shape. Make sence,
-# only if theRemoveWebs is TRUE.
-#
-# @return New GEOM_Object, containing the result shapes.
-#
-# Example: see GEOM_TestAll.py
-def MakePartition(ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
- Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[]):
- anObj = BoolOp.MakePartition(ListShapes, ListTools,
- ListKeepInside, ListRemoveInside,
- Limit, RemoveWebs, ListMaterials);
- if BoolOp.IsDone() == 0:
- print "MakePartition : ", BoolOp.GetErrorCode()
- return anObj
-
-## Perform partition operation.
-# This method may be useful if it is needed to make a partition for
-# compound contains nonintersected shapes. Performance will be better
-# since intersection between shapes from compound is not performed.
-#
-# Description of all parameters as in previous method MakePartition()
-#
-# !!!NOTE: Passed compounds (via ListShapes or via ListTools)
-# have to consist of nonintersecting shapes.
-#
-# @return New GEOM_Object, containing the result shapes.
-#
-def MakePartitionNonSelfIntersectedShape(ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
- Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[]):
- anObj = BoolOp.MakePartitionNonSelfIntersectedShape(ListShapes, ListTools,
- ListKeepInside, ListRemoveInside,
- Limit, RemoveWebs, ListMaterials);
- if BoolOp.IsDone() == 0:
- print "MakePartitionNonSelfIntersectedShape : ", BoolOp.GetErrorCode()
- return anObj
-
-## Shortcut to MakePartition()
-#
-# Example: see GEOM_TestOthers.py
-def Partition(ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
- Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[]):
- anObj = MakePartition(ListShapes, ListTools,
- ListKeepInside, ListRemoveInside,
- Limit, RemoveWebs, ListMaterials);
- return anObj
-
-## Perform partition of the Shape with the Plane
-# @param theShape Shape to be intersected.
-# @param thePlane Tool shape, to intersect theShape.
-# @return New GEOM_Object, containing the result shape.
-#
-# Example: see GEOM_TestAll.py
-def MakeHalfPartition(theShape, thePlane):
- anObj = BoolOp.MakeHalfPartition(theShape, thePlane)
- if BoolOp.IsDone() == 0:
- print "MakeHalfPartition : ", BoolOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Transform objects
-# -----------------------------------------------------------------------------
-
-## Translate the given object along the vector, specified
-# by its end points, creating its copy before the translation.
-# @param theObject The object to be translated.
-# @param thePoint1 Start point of translation vector.
-# @param thePoint2 End point of translation vector.
-# @return New GEOM_Object, containing the translated object.
-#
-# Example: see GEOM_TestAll.py
-def MakeTranslationTwoPoints(theObject, thePoint1, thePoint2):
- anObj = TrsfOp.TranslateTwoPointsCopy(theObject, thePoint1, thePoint2)
- if TrsfOp.IsDone() == 0:
- print "TranslateTwoPointsCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Translate the given object along the vector, specified
-# by its components, creating its copy before the translation.
-# @param theObject The object to be translated.
-# @param theDX,theDY,theDZ Components of translation vector.
-# @return New GEOM_Object, containing the translated object.
-#
-# Example: see GEOM_TestAll.py
-def MakeTranslation(theObject, theDX, theDY, theDZ):
- anObj = TrsfOp.TranslateDXDYDZCopy(theObject, theDX, theDY, theDZ)
- if TrsfOp.IsDone() == 0:
- print "TranslateDXDYDZCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Translate the given object along the given vector,
-# creating its copy before the translation.
-# @param theObject The object to be translated.
-# @param theVector The translation vector.
-# @return New GEOM_Object, containing the translated object.
-#
-# Example: see GEOM_TestAll.py
-def MakeTranslationVector(theObject, theVector):
- anObj = TrsfOp.TranslateVectorCopy(theObject, theVector)
- if TrsfOp.IsDone() == 0:
- print "TranslateVectorCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Rotate the given object around the given axis
-# on the given angle, creating its copy before the rotatation.
-# @param theObject The object to be rotated.
-# @param theAxis Rotation axis.
-# @param theAngle Rotation angle in radians.
-# @return New GEOM_Object, containing the rotated object.
-#
-# Example: see GEOM_TestAll.py
-def MakeRotation(theObject, theAxis, theAngle):
- anObj = TrsfOp.RotateCopy(theObject, theAxis, theAngle)
- if TrsfOp.IsDone() == 0:
- print "RotateCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Rotate given object around vector perpendicular to plane
-# containing three points, creating its copy before the rotatation.
-# @param theObject The object to be rotated.
-# @param theCentPoint central point - the axis is the vector perpendicular to the plane
-# containing the three points.
-# @param thePoint1 and thePoint2 - in a perpendicular plan of the axis.
-# @return New GEOM_Object, containing the rotated object.
-#
-# Example: see GEOM_TestAll.py
-def MakeRotationThreePoints(theObject, theCentPoint, thePoint1, thePoint2):
- anObj = TrsfOp.RotateThreePointsCopy(theObject, theCentPoint, thePoint1, thePoint2)
- if TrsfOp.IsDone() == 0:
- print "RotateThreePointsCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Scale the given object by the factor, creating its copy before the scaling.
-# @param theObject The object to be scaled.
-# @param thePoint Center point for scaling.
-# @param theFactor Scaling factor value.
-# @return New GEOM_Object, containing the scaled shape.
-#
-# Example: see GEOM_TestAll.py
-def MakeScaleTransform(theObject, thePoint, theFactor):
- anObj = TrsfOp.ScaleShapeCopy(theObject, thePoint, theFactor)
- if TrsfOp.IsDone() == 0:
- print "ScaleShapeCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Create an object, symmetrical
-# to the given one relatively the given plane.
-# @param theObject The object to be mirrored.
-# @param thePlane Plane of symmetry.
-# @return New GEOM_Object, containing the mirrored shape.
-#
-# Example: see GEOM_TestAll.py
-def MakeMirrorByPlane(theObject, thePlane):
- anObj = TrsfOp.MirrorPlaneCopy(theObject, thePlane)
- if TrsfOp.IsDone() == 0:
- print "MirrorPlaneCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Create an object, symmetrical
-# to the given one relatively the given axis.
-# @param theObject The object to be mirrored.
-# @param theAxis Axis of symmetry.
-# @return New GEOM_Object, containing the mirrored shape.
-#
-# Example: see GEOM_TestAll.py
-def MakeMirrorByAxis(theObject, theAxis):
- anObj = TrsfOp.MirrorAxisCopy(theObject, theAxis)
- if TrsfOp.IsDone() == 0:
- print "MirrorAxisCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Create an object, symmetrical
-# to the given one relatively the given point.
-# @param theObject The object to be mirrored.
-# @param thePoint Point of symmetry.
-# @return New GEOM_Object, containing the mirrored shape.
-#
-# Example: see GEOM_TestAll.py
-def MakeMirrorByPoint(theObject, thePoint):
- anObj = TrsfOp.MirrorPointCopy(theObject, thePoint)
- if TrsfOp.IsDone() == 0:
- print "MirrorPointCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Modify the Location of the given object by LCS,
-# creating its copy before the setting.
-# @param theObject The object to be displaced.
-# @param theStartLCS Coordinate system to perform displacement from it.
-# If \a theStartLCS is NULL, displacement
-# will be performed from global CS.
-# If \a theObject itself is used as \a theStartLCS,
-# its location will be changed to \a theEndLCS.
-# @param theEndLCS Coordinate system to perform displacement to it.
-# @return New GEOM_Object, containing the displaced shape.
-#
-# Example: see GEOM_TestAll.py
-def MakePosition(theObject, theStartLCS, theEndLCS):
- anObj = TrsfOp.PositionShapeCopy(theObject, theStartLCS, theEndLCS)
- if TrsfOp.IsDone() == 0:
- print "PositionShapeCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Create new object as offset of the given one.
-# @param theObject The base object for the offset.
-# @param theOffset Offset value.
-# @return New GEOM_Object, containing the offset object.
-#
-# Example: see GEOM_TestAll.py
-def MakeOffset(theObject, theOffset):
- anObj = TrsfOp.OffsetShapeCopy(theObject, theOffset)
- if TrsfOp.IsDone() == 0:
- print "OffsetShapeCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Patterns
-# -----------------------------------------------------------------------------
-
-## Translate the given object along the given vector a given number times
-# @param theObject The object to be translated.
-# @param theVector Direction of the translation.
-# @param theStep Distance to translate on.
-# @param theNbTimes Quantity of translations to be done.
-# @return New GEOM_Object, containing compound of all
-# the shapes, obtained after each translation.
-#
-# Example: see GEOM_TestAll.py
-def MakeMultiTranslation1D(theObject, theVector, theStep, theNbTimes):
- anObj = TrsfOp.MultiTranslate1D(theObject, theVector, theStep, theNbTimes)
- if TrsfOp.IsDone() == 0:
- print "MultiTranslate1D : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Conseqently apply two specified translations to theObject specified number of times.
-# @param theObject The object to be translated.
-# @param theVector1 Direction of the first translation.
-# @param theStep1 Step of the first translation.
-# @param theNbTimes1 Quantity of translations to be done along theVector1.
-# @param theVector2 Direction of the second translation.
-# @param theStep2 Step of the second translation.
-# @param theNbTimes2 Quantity of translations to be done along theVector2.
-# @return New GEOM_Object, containing compound of all
-# the shapes, obtained after each translation.
-#
-# Example: see GEOM_TestAll.py
-def MakeMultiTranslation2D(theObject, theVector1, theStep1, theNbTimes1,
- theVector2, theStep2, theNbTimes2):
- anObj = TrsfOp.MultiTranslate2D(theObject, theVector1, theStep1, theNbTimes1,
- theVector2, theStep2, theNbTimes2)
- if TrsfOp.IsDone() == 0:
- print "MultiTranslate2D : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Rotate the given object around the given axis a given number times.
-# Rotation angle will be 2*PI/theNbTimes.
-# @param theObject The object to be rotated.
-# @param theAxis The rotation axis.
-# @param theNbTimes Quantity of rotations to be done.
-# @return New GEOM_Object, containing compound of all the
-# shapes, obtained after each rotation.
-#
-# Example: see GEOM_TestAll.py
-def MultiRotate1D(theObject, theAxis, theNbTimes):
- anObj = TrsfOp.MultiRotate1D(theObject, theAxis, theNbTimes)
- if TrsfOp.IsDone() == 0:
- print "MultiRotate1D : ", TrsfOp.GetErrorCode()
- return anObj
-
-## Rotate the given object around the
-# given axis on the given angle a given number
-# times and multi-translate each rotation result.
-# Translation direction passes through center of gravity
-# of rotated shape and its projection on the rotation axis.
-# @param theObject The object to be rotated.
-# @param theAxis Rotation axis.
-# @param theAngle Rotation angle in graduces.
-# @param theNbTimes1 Quantity of rotations to be done.
-# @param theStep Translation distance.
-# @param theNbTimes2 Quantity of translations to be done.
-# @return New GEOM_Object, containing compound of all the
-# shapes, obtained after each transformation.
-#
-# Example: see GEOM_TestAll.py
-def MultiRotate2D(theObject, theAxis, theAngle, theNbTimes1, theStep, theNbTimes2):
- anObj = TrsfOp.MultiRotate2D(theObject, theAxis, theAngle, theNbTimes1, theStep, theNbTimes2)
- if TrsfOp.IsDone() == 0:
- print "MultiRotate2D : ", TrsfOp.GetErrorCode()
- return anObj
-
-## The same, as MultiRotate1D(), but axis is given by direction and point
-#
-# Example: see GEOM_TestOthers.py
-def MakeMultiRotation1D(aShape,aDir,aPoint,aNbTimes):
- aVec = MakeLine(aPoint,aDir)
- anObj = MultiRotate1D(aShape,aVec,aNbTimes)
- return anObj
-
-## The same, as MultiRotate2D(), but axis is given by direction and point
-#
-# Example: see GEOM_TestOthers.py
-def MakeMultiRotation2D(aShape,aDir,aPoint,anAngle,nbtimes1,aStep,nbtimes2):
- aVec = MakeLine(aPoint,aDir)
- anObj = MultiRotate2D(aShape,aVec,anAngle,nbtimes1,aStep,nbtimes2)
- return anObj
-
-# -----------------------------------------------------------------------------
-# Local operations
-# -----------------------------------------------------------------------------
-
-## Perform a fillet on all edges of the given shape.
-# @param theShape Shape, to perform fillet on.
-# @param theR Fillet radius.
-# @return New GEOM_Object, containing the result shape.
-#
-# Example: see GEOM_TestOthers.py
-def MakeFilletAll(theShape, theR):
- anObj = LocalOp.MakeFilletAll(theShape, theR)
- if LocalOp.IsDone() == 0:
- print "MakeFilletAll : ", LocalOp.GetErrorCode()
- return anObj
-
-## Perform a fillet on the specified edges/faces of the given shape
-# @param theShape Shape, to perform fillet on.
-# @param theR Fillet radius.
-# @param theShapeType Type of shapes in <theListShapes>.
-# @param theListShapes Global indices of edges/faces to perform fillet on.
-# \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
-# @return New GEOM_Object, containing the result shape.
-#
-# Example: see GEOM_TestAll.py
-def MakeFillet(theShape, theR, theShapeType, theListShapes):
- anObj = None
- if theShapeType == ShapeType["EDGE"]:
- anObj = LocalOp.MakeFilletEdges(theShape, theR, theListShapes)
- else:
- anObj = LocalOp.MakeFilletFaces(theShape, theR, theListShapes)
- if LocalOp.IsDone() == 0:
- print "MakeFillet : ", LocalOp.GetErrorCode()
- return anObj
-
-## Perform a symmetric chamfer on all edges of the given shape.
-# @param theShape Shape, to perform chamfer on.
-# @param theD Chamfer size along each face.
-# @return New GEOM_Object, containing the result shape.
-#
-# Example: see GEOM_TestOthers.py
-def MakeChamferAll(theShape, theD):
- anObj = LocalOp.MakeChamferAll(theShape, theD)
- if LocalOp.IsDone() == 0:
- print "MakeChamferAll : ", LocalOp.GetErrorCode()
- return anObj
-
-## Perform a chamfer on edges, common to the specified faces,
-# with distance D1 on the Face1
-# @param theShape Shape, to perform chamfer on.
-# @param theD1 Chamfer size along \a theFace1.
-# @param theD2 Chamfer size along \a theFace2.
-# @param theFace1,theFace2 Global indices of two faces of \a theShape.
-# \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
-# @return New GEOM_Object, containing the result shape.
-#
-# Example: see GEOM_TestAll.py
-def MakeChamferEdge(theShape, theD1, theD2, theFace1, theFace2):
- anObj = LocalOp.MakeChamferEdge(theShape, theD1, theD2, theFace1, theFace2)
- if LocalOp.IsDone() == 0:
- print "MakeChamferEdge : ", LocalOp.GetErrorCode()
- return anObj
-
-## Perform a chamfer on all edges of the specified faces,
-# with distance D1 on the first specified face (if several for one edge)
-# @param theShape Shape, to perform chamfer on.
-# @param theD1 Chamfer size along face from \a theFaces. If both faces,
-# connected to the edge, are in \a theFaces, \a theD1
-# will be get along face, which is nearer to \a theFaces beginning.
-# @param theD2 Chamfer size along another of two faces, connected to the edge.
-# @param theFaces Sequence of global indices of faces of \a theShape.
-# \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
-# @return New GEOM_Object, containing the result shape.
-#
-# Example: see GEOM_TestAll.py
-def MakeChamferFaces(theShape, theD1, theD2, theFaces):
- anObj = LocalOp.MakeChamferFaces(theShape, theD1, theD2, theFaces)
- if LocalOp.IsDone() == 0:
- print "MakeChamferFaces : ", LocalOp.GetErrorCode()
- return anObj
-
-## Shortcut to MakeChamferEdge() and MakeChamferFaces()
-#
-# Example: see GEOM_TestOthers.py
-def MakeChamfer(aShape,d1,d2,aShapeType,ListShape):
- anObj = None
- if aShapeType == ShapeType["EDGE"]:
- anObj = MakeChamferEdge(aShape,d1,d2,ListShape[0],ListShape[1])
- else:
- anObj = MakeChamferFaces(aShape,d1,d2,ListShape)
- return anObj
-
-## Perform an Archimde operation on the given shape with given parameters.
-# The object presenting the resulting face is returned.
-# @param theShape Shape to be put in water.
-# @param theWeight Weight og the shape.
-# @param theWaterDensity Density of the water.
-# @param theMeshDeflection Deflection of the mesh, using to compute the section.
-# @return New GEOM_Object, containing a section of \a theShape
-# by a plane, corresponding to water level.
-#
-# Example: see GEOM_TestAll.py
-def Archimede(theShape, theWeight, theWaterDensity, theMeshDeflection):
- anObj = LocalOp.MakeArchimede(theShape, theWeight, theWaterDensity, theMeshDeflection)
- if LocalOp.IsDone() == 0:
- print "MakeArchimede : ", LocalOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Information objects
-# -----------------------------------------------------------------------------
-
-## Get point coordinates
-# @return [x, y, z]
-#
-# Example: see GEOM_TestMeasures.py
-def PointCoordinates(Point):
- aTuple = MeasuOp.PointCoordinates(Point)
- if MeasuOp.IsDone() == 0:
- print "PointCoordinates : ", MeasuOp.GetErrorCode()
- return aTuple
-
-## Get summarized length of all wires,
-# area of surface and volume of the given shape.
-# @param theShape Shape to define properties of.
-# @return [theLength, theSurfArea, theVolume]
-# theLength: Summarized length of all wires of the given shape.
-# theSurfArea: Area of surface of the given shape.
-# theVolume: Volume of the given shape.
-#
-# Example: see GEOM_TestMeasures.py
-def BasicProperties(theShape):
- aTuple = MeasuOp.GetBasicProperties(theShape)
- if MeasuOp.IsDone() == 0:
- print "BasicProperties : ", MeasuOp.GetErrorCode()
- return aTuple
-
-## Get parameters of bounding box of the given shape
-# @param theShape Shape to obtain bounding box of.
-# @return [Xmin,Xmax, Ymin,Ymax, Zmin,Zmax]
-# Xmin,Xmax: Limits of shape along OX axis.
-# Ymin,Ymax: Limits of shape along OY axis.
-# Zmin,Zmax: Limits of shape along OZ axis.
-#
-# Example: see GEOM_TestMeasures.py
-def BoundingBox(theShape):
- aTuple = MeasuOp.GetBoundingBox(theShape)
- if MeasuOp.IsDone() == 0:
- print "BoundingBox : ", MeasuOp.GetErrorCode()
- return aTuple
-
-## Get inertia matrix and moments of inertia of theShape.
-# @param theShape Shape to calculate inertia of.
-# @return [I11,I12,I13, I21,I22,I23, I31,I32,I33, Ix,Iy,Iz]
-# I(1-3)(1-3): Components of the inertia matrix of the given shape.
-# Ix,Iy,Iz: Moments of inertia of the given shape.
-#
-# Example: see GEOM_TestMeasures.py
-def Inertia(theShape):
- aTuple = MeasuOp.GetInertia(theShape)
- if MeasuOp.IsDone() == 0:
- print "Inertia : ", MeasuOp.GetErrorCode()
- return aTuple
-
-## Get minimal distance between the given shapes.
-# @param theShape1,theShape2 Shapes to find minimal distance between.
-# @return Value of the minimal distance between the given shapes.
-#
-# Example: see GEOM_TestMeasures.py
-def MinDistance(theShape1, theShape2):
- aTuple = MeasuOp.GetMinDistance(theShape1, theShape2)
- if MeasuOp.IsDone() == 0:
- print "MinDistance : ", MeasuOp.GetErrorCode()
- return aTuple[0]
-
-## Get min and max tolerances of sub-shapes of theShape
-# @param theShape Shape, to get tolerances of.
-# @return [FaceMin,FaceMax, EdgeMin,EdgeMax, VertMin,VertMax]
-# FaceMin,FaceMax: Min and max tolerances of the faces.
-# EdgeMin,EdgeMax: Min and max tolerances of the edges.
-# VertMin,VertMax: Min and max tolerances of the vertices.
-#
-# Example: see GEOM_TestMeasures.py
-def Tolerance(theShape):
- aTuple = MeasuOp.GetTolerance(theShape)
- if MeasuOp.IsDone() == 0:
- print "Tolerance : ", MeasuOp.GetErrorCode()
- return aTuple
-
-## Obtain description of the given shape (number of sub-shapes of each type)
-# @param theShape Shape to be described.
-# @return Description of the given shape.
-#
-# Example: see GEOM_TestMeasures.py
-def WhatIs(theShape):
- aDescr = MeasuOp.WhatIs(theShape)
- if MeasuOp.IsDone() == 0:
- print "WhatIs : ", MeasuOp.GetErrorCode()
- return aDescr
-
-## Get a point, situated at the centre of mass of theShape.
-# @param theShape Shape to define centre of mass of.
-# @return New GEOM_Object, containing the created point.
-#
-# Example: see GEOM_TestMeasures.py
-def MakeCDG(theShape):
- anObj = MeasuOp.GetCentreOfMass(theShape)
- if MeasuOp.IsDone() == 0:
- print "GetCentreOfMass : ", MeasuOp.GetErrorCode()
- return anObj
-
-## Check a topology of the given shape.
-# @param theShape Shape to check validity of.
-# @param theIsCheckGeom If FALSE, only the shape's topology will be checked,
-# if TRUE, the shape's geometry will be checked also.
-# @return TRUE, if the shape "seems to be valid".
-# If theShape is invalid, prints a description of problem.
-#
-# Example: see GEOM_TestMeasures.py
-def CheckShape(theShape, theIsCheckGeom = 0):
- if theIsCheckGeom:
- (IsValid, Status) = MeasuOp.CheckShapeWithGeometry(theShape)
- else:
- (IsValid, Status) = MeasuOp.CheckShape(theShape)
-
- if MeasuOp.IsDone() == 0:
- print "CheckShape : ", MeasuOp.GetErrorCode()
- else:
- if IsValid == 0:
- print Status
- return IsValid
-
-## Get position (LCS) of theShape.
-#
-# Origin of the LCS is situated at the shape's center of mass.
-# Axes of the LCS are obtained from shape's location or,
-# if the shape is a planar face, from position of its plane.
-#
-# @param theShape Shape to calculate position of.
-# @return [Ox,Oy,Oz, Zx,Zy,Zz, Xx,Xy,Xz].
-# Ox,Oy,Oz: Coordinates of shape's LCS origin.
-# Zx,Zy,Zz: Coordinates of shape's LCS normal(main) direction.
-# Xx,Xy,Xz: Coordinates of shape's LCS X direction.
-#
-# Example: see GEOM_TestMeasures.py
-def GetPosition(theShape):
- aTuple = MeasuOp.GetPosition(theShape)
- if MeasuOp.IsDone() == 0:
- print "GetPosition : ", MeasuOp.GetErrorCode()
- return aTuple
-
-## Get kind of theShape.
-#
-# @param theShape Shape to get a kind of.
-# @return Returns a kind of shape in terms of <VAR>GEOM_IKindOfShape.shape_kind</VAR> enumeration
-# and a list of parameters, describing the shape.
-# @note Concrete meaning of each value, returned via \a theIntegers
-# or \a theDoubles list depends on the kind of the shape.
-# The full list of possible outputs is:
-#
-# geompy.kind.COMPOUND nb_solids nb_faces nb_edges nb_vertices
-# geompy.kind.COMPSOLID nb_solids nb_faces nb_edges nb_vertices
-#
-# geompy.kind.SHELL geompy.info.CLOSED nb_faces nb_edges nb_vertices
-# geompy.kind.SHELL geompy.info.UNCLOSED nb_faces nb_edges nb_vertices
-#
-# geompy.kind.WIRE geompy.info.CLOSED nb_edges nb_vertices
-# geompy.kind.WIRE geompy.info.UNCLOSED nb_edges nb_vertices
-#
-# geompy.kind.SPHERE xc yc zc R
-# geompy.kind.CYLINDER xb yb zb dx dy dz R H
-# geompy.kind.BOX xc yc zc ax ay az
-# geompy.kind.ROTATED_BOX xc yc zc zx zy zz xx xy xz ax ay az
-# geompy.kind.TORUS xc yc zc dx dy dz R_1 R_2
-# geompy.kind.CONE xb yb zb dx dy dz R_1 R_2 H
-# geompy.kind.POLYHEDRON nb_faces nb_edges nb_vertices
-# geompy.kind.SOLID nb_faces nb_edges nb_vertices
-#
-# geompy.kind.SPHERE2D xc yc zc R
-# geompy.kind.CYLINDER2D xb yb zb dx dy dz R H
-# geompy.kind.TORUS2D xc yc zc dx dy dz R_1 R_2
-# geompy.kind.CONE2D xc yc zc dx dy dz R_1 R_2 H
-# geompy.kind.DISK_CIRCLE xc yc zc dx dy dz R
-# geompy.kind.DISK_ELLIPSE xc yc zc dx dy dz R_1 R_2
-# geompy.kind.POLYGON xo yo zo dx dy dz nb_edges nb_vertices
-# geompy.kind.PLANE xo yo zo dx dy dz
-# geompy.kind.PLANAR xo yo zo dx dy dz nb_edges nb_vertices
-# geompy.kind.FACE nb_edges nb_vertices
-#
-# geompy.kind.CIRCLE xc yc zc dx dy dz R
-# geompy.kind.ARC_CIRCLE xc yc zc dx dy dz R x1 y1 z1 x2 y2 z2
-# geompy.kind.ELLIPSE xc yc zc dx dy dz R_1 R_2
-# geompy.kind.ARC_ELLIPSE xc yc zc dx dy dz R_1 R_2 x1 y1 z1 x2 y2 z2
-# geompy.kind.LINE xo yo zo dx dy dz
-# geompy.kind.SEGMENT x1 y1 z1 x2 y2 z2
-# geompy.kind.EDGE nb_vertices
-#
-# geompy.kind.VERTEX x y z
-#
-# Example: see GEOM_TestMeasures.py
-def KindOfShape(theShape):
- aRoughTuple = MeasuOp.KindOfShape(theShape)
- if MeasuOp.IsDone() == 0:
- print "KindOfShape : ", MeasuOp.GetErrorCode()
- return []
-
- aKind = aRoughTuple[0]
- anInts = aRoughTuple[1]
- aDbls = aRoughTuple[2]
-
- # Now there is no exception from this rule:
- aKindTuple = [aKind] + aDbls + anInts
-
- # If they are we will regroup parameters for such kind of shape.
- # For example:
- #if aKind == kind.SOME_KIND:
- # # SOME_KIND int int double int double double
- # aKindTuple = [aKind, anInts[0], anInts[1], aDbls[0], anInts[2], aDbls[1], aDbls[2]]
-
- return aKindTuple
-
-# -----------------------------------------------------------------------------
-# Import/Export objects
-# -----------------------------------------------------------------------------
-
-## Import a shape from the BREP or IGES or STEP file
-# (depends on given format) with given name.
-# @param theFileName The file, containing the shape.
-# @param theFormatName Specify format for the file reading.
-# Available formats can be obtained with InsertOp.ImportTranslators() method.
-# @return New GEOM_Object, containing the imported shape.
-#
-# Example: see GEOM_TestOthers.py
-def Import(theFileName, theFormatName):
- anObj = InsertOp.Import(theFileName, theFormatName)
- if InsertOp.IsDone() == 0:
- print "Import : ", InsertOp.GetErrorCode()
- return anObj
-
-## Shortcut to Import() for BREP format
-#
-# Example: see GEOM_TestOthers.py
-def ImportBREP(theFileName):
- return Import(theFileName, "BREP")
-
-## Shortcut to Import() for IGES format
-#
-# Example: see GEOM_TestOthers.py
-def ImportIGES(theFileName):
- return Import(theFileName, "IGES")
-
-## Shortcut to Import() for STEP format
-#
-# Example: see GEOM_TestOthers.py
-def ImportSTEP(theFileName):
- return Import(theFileName, "STEP")
-
-## Export the given shape into a file with given name.
-# @param theObject Shape to be stored in the file.
-# @param theFileName Name of the file to store the given shape in.
-# @param theFormatName Specify format for the shape storage.
-# Available formats can be obtained with InsertOp.ImportTranslators() method.
-#
-# Example: see GEOM_TestOthers.py
-def Export(theObject, theFileName, theFormatName):
- InsertOp.Export(theObject, theFileName, theFormatName)
- if InsertOp.IsDone() == 0:
- print "Export : ", InsertOp.GetErrorCode()
-
-## Shortcut to Export() for BREP format
-#
-# Example: see GEOM_TestOthers.py
-def ExportBREP(theObject, theFileName):
- return Export(theObject, theFileName, "BREP")
-
-## Shortcut to Export() for IGES format
-#
-# Example: see GEOM_TestOthers.py
-def ExportIGES(theObject, theFileName):
- return Export(theObject, theFileName, "IGES")
-
-## Shortcut to Export() for STEP format
-#
-# Example: see GEOM_TestOthers.py
-def ExportSTEP(theObject, theFileName):
- return Export(theObject, theFileName, "STEP")
-
-# -----------------------------------------------------------------------------
-# Block operations
-# -----------------------------------------------------------------------------
-
-## Create a quadrangle face from four edges. Order of Edges is not
-# important. It is not necessary that edges share the same vertex.
-# @param E1,E2,E3,E4 Edges for the face bound.
-# @return New GEOM_Object, containing the created face.
-#
-# Example: see GEOM_Spanner.py
-def MakeQuad(E1, E2, E3, E4):
- anObj = BlocksOp.MakeQuad(E1, E2, E3, E4)
- if BlocksOp.IsDone() == 0:
- print "MakeQuad : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Create a quadrangle face on two edges.
-# The missing edges will be built by creating the shortest ones.
-# @param E1,E2 Two opposite edges for the face.
-# @return New GEOM_Object, containing the created face.
-#
-# Example: see GEOM_Spanner.py
-def MakeQuad2Edges(E1, E2):
- anObj = BlocksOp.MakeQuad2Edges(E1, E2)
- if BlocksOp.IsDone() == 0:
- print "MakeQuad2Edges : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Create a quadrangle face with specified corners.
-# The missing edges will be built by creating the shortest ones.
-# @param V1,V2,V3,V4 Corner vertices for the face.
-# @return New GEOM_Object, containing the created face.
-#
-# Example: see GEOM_Spanner.py
-def MakeQuad4Vertices(V1, V2, V3, V4):
- anObj = BlocksOp.MakeQuad4Vertices(V1, V2, V3, V4)
- if BlocksOp.IsDone() == 0:
- print "MakeQuad4Vertices : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Create a hexahedral solid, bounded by the six given faces. Order of
-# faces is not important. It is not necessary that Faces share the same edge.
-# @param F1,F2,F3,F4,F5,F6 Faces for the hexahedral solid.
-# @return New GEOM_Object, containing the created solid.
-#
-# Example: see GEOM_Spanner.py
-def MakeHexa(F1, F2, F3, F4, F5, F6):
- anObj = BlocksOp.MakeHexa(F1, F2, F3, F4, F5, F6)
- if BlocksOp.IsDone() == 0:
- print "MakeHexa : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Create a hexahedral solid between two given faces.
-# The missing faces will be built by creating the smallest ones.
-# @param F1,F2 Two opposite faces for the hexahedral solid.
-# @return New GEOM_Object, containing the created solid.
-#
-# Example: see GEOM_Spanner.py
-def MakeHexa2Faces(F1, F2):
- anObj = BlocksOp.MakeHexa2Faces(F1, F2)
- if BlocksOp.IsDone() == 0:
- print "MakeHexa2Faces : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Get a vertex, found in the given shape by its coordinates.
-# @param theShape Block or a compound of blocks.
-# @param theX,theY,theZ Coordinates of the sought vertex.
-# @param theEpsilon Maximum allowed distance between the resulting
-# vertex and point with the given coordinates.
-# @return New GEOM_Object, containing the found vertex.
-#
-# Example: see GEOM_TestOthers.py
-def GetPoint(theShape, theX, theY, theZ, theEpsilon):
- anObj = BlocksOp.GetPoint(theShape, theX, theY, theZ, theEpsilon)
- if BlocksOp.IsDone() == 0:
- print "GetPoint : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Get an edge, found in the given shape by two given vertices.
-# @param theShape Block or a compound of blocks.
-# @param thePoint1,thePoint2 Points, close to the ends of the desired edge.
-# @return New GEOM_Object, containing the found edge.
-#
-# Example: see GEOM_Spanner.py
-def GetEdge(theShape, thePoint1, thePoint2):
- anObj = BlocksOp.GetEdge(theShape, thePoint1, thePoint2)
- if BlocksOp.IsDone() == 0:
- print "GetEdge : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Find an edge of the given shape, which has minimal distance to the given point.
-# @param theShape Block or a compound of blocks.
-# @param thePoint Point, close to the desired edge.
-# @return New GEOM_Object, containing the found edge.
-#
-# Example: see GEOM_TestOthers.py
-def GetEdgeNearPoint(theShape, thePoint):
- anObj = BlocksOp.GetEdgeNearPoint(theShape, thePoint)
- if BlocksOp.IsDone() == 0:
- print "GetEdgeNearPoint : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Returns a face, found in the given shape by four given corner vertices.
-# @param theShape Block or a compound of blocks.
-# @param thePoint1-thePoint4 Points, close to the corners of the desired face.
-# @return New GEOM_Object, containing the found face.
-#
-# Example: see GEOM_Spanner.py
-def GetFaceByPoints(theShape, thePoint1, thePoint2, thePoint3, thePoint4):
- anObj = BlocksOp.GetFaceByPoints(theShape, thePoint1, thePoint2, thePoint3, thePoint4)
- if BlocksOp.IsDone() == 0:
- print "GetFaceByPoints : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Get a face of block, found in the given shape by two given edges.
-# @param theShape Block or a compound of blocks.
-# @param theEdge1,theEdge2 Edges, close to the edges of the desired face.
-# @return New GEOM_Object, containing the found face.
-#
-# Example: see GEOM_Spanner.py
-def GetFaceByEdges(theShape, theEdge1, theEdge2):
- anObj = BlocksOp.GetFaceByEdges(theShape, theEdge1, theEdge2)
- if BlocksOp.IsDone() == 0:
- print "GetFaceByEdges : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Find a face, opposite to the given one in the given block.
-# @param theBlock Must be a hexahedral solid.
-# @param theFace Face of \a theBlock, opposite to the desired face.
-# @return New GEOM_Object, containing the found face.
-#
-# Example: see GEOM_Spanner.py
-def GetOppositeFace(theBlock, theFace):
- anObj = BlocksOp.GetOppositeFace(theBlock, theFace)
- if BlocksOp.IsDone() == 0:
- print "GetOppositeFace : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Find a face of the given shape, which has minimal distance to the given point.
-# @param theShape Block or a compound of blocks.
-# @param thePoint Point, close to the desired face.
-# @return New GEOM_Object, containing the found face.
-#
-# Example: see GEOM_Spanner.py
-def GetFaceNearPoint(theShape, thePoint):
- anObj = BlocksOp.GetFaceNearPoint(theShape, thePoint)
- if BlocksOp.IsDone() == 0:
- print "GetFaceNearPoint : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Find a face of block, whose outside normale has minimal angle with the given vector.
-# @param theShape Block or a compound of blocks.
-# @param theVector Vector, close to the normale of the desired face.
-# @return New GEOM_Object, containing the found face.
-#
-# Example: see GEOM_Spanner.py
-def GetFaceByNormale(theBlock, theVector):
- anObj = BlocksOp.GetFaceByNormale(theBlock, theVector)
- if BlocksOp.IsDone() == 0:
- print "GetFaceByNormale : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Check, if the compound of blocks is given.
-# To be considered as a compound of blocks, the
-# given shape must satisfy the following conditions:
-# - Each element of the compound should be a Block (6 faces and 12 edges).
-# - A connection between two Blocks should be an entire quadrangle face or an entire edge.
-# - The compound should be connexe.
-# - The glue between two quadrangle faces should be applied.
-# @param theCompound The compound to check.
-# @return TRUE, if the given shape is a compound of blocks.
-# If theCompound is not valid, prints all discovered errors.
-#
-# Example: see GEOM_Spanner.py
-def CheckCompoundOfBlocks(theCompound):
- (IsValid, BCErrors) = BlocksOp.CheckCompoundOfBlocks(theCompound)
- if BlocksOp.IsDone() == 0:
- print "CheckCompoundOfBlocks : ", BlocksOp.GetErrorCode()
- else:
- if IsValid == 0:
- Descr = BlocksOp.PrintBCErrors(theCompound, BCErrors)
- print Descr
- return IsValid
-
-## Remove all seam and degenerated edges from \a theShape.
-# Unite faces and edges, sharing one surface. It means that
-# this faces must have references to one C++ surface object (handle).
-# @param theShape The compound or single solid to remove irregular edges from.
-# @return Improved shape.
-#
-# Example: see GEOM_TestOthers.py
-def RemoveExtraEdges(theShape):
- anObj = BlocksOp.RemoveExtraEdges(theShape)
- if BlocksOp.IsDone() == 0:
- print "RemoveExtraEdges : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Check, if the given shape is a blocks compound.
-# Fix all detected errors.
-# \note Single block can be also fixed by this method.
-# @param theCompound The compound to check and improve.
-# @return Improved compound.
-#
-# Example: see GEOM_TestOthers.py
-def CheckAndImprove(theShape):
- anObj = BlocksOp.CheckAndImprove(theShape)
- if BlocksOp.IsDone() == 0:
- print "CheckAndImprove : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Get all the blocks, contained in the given compound.
-# @param theCompound The compound to explode.
-# @param theMinNbFaces If solid has lower number of faces, it is not a block.
-# @param theMaxNbFaces If solid has higher number of faces, it is not a block.
-# \note If theMaxNbFaces = 0, the maximum number of faces is not restricted.
-# @return List of GEOM_Objects, containing the retrieved blocks.
-#
-# Example: see GEOM_TestOthers.py
-def MakeBlockExplode(theCompound, theMinNbFaces, theMaxNbFaces):
- aList = BlocksOp.ExplodeCompoundOfBlocks(theCompound, theMinNbFaces, theMaxNbFaces)
- if BlocksOp.IsDone() == 0:
- print "MakeBlockExplode : ", BlocksOp.GetErrorCode()
- return aList
-
-## Find block, containing the given point inside its volume or on boundary.
-# @param theCompound Compound, to find block in.
-# @param thePoint Point, close to the desired block. If the point lays on
-# boundary between some blocks, we return block with nearest center.
-# @return New GEOM_Object, containing the found block.
-#
-# Example: see GEOM_Spanner.py
-def GetBlockNearPoint(theCompound, thePoint):
- anObj = BlocksOp.GetBlockNearPoint(theCompound, thePoint)
- if BlocksOp.IsDone() == 0:
- print "GetBlockNearPoint : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Find block, containing all the elements, passed as the parts, or maximum quantity of them.
-# @param theCompound Compound, to find block in.
-# @param theParts List of faces and/or edges and/or vertices to be parts of the found block.
-# @return New GEOM_Object, containing the found block.
-#
-# Example: see GEOM_TestOthers.py
-def GetBlockByParts(theCompound, theParts):
- anObj = BlocksOp.GetBlockByParts(theCompound, theParts)
- if BlocksOp.IsDone() == 0:
- print "GetBlockByParts : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Return all blocks, containing all the elements, passed as the parts.
-# @param theCompound Compound, to find blocks in.
-# @param theParts List of faces and/or edges and/or vertices to be parts of the found blocks.
-# @return List of GEOM_Objects, containing the found blocks.
-#
-# Example: see GEOM_Spanner.py
-def GetBlocksByParts(theCompound, theParts):
- aList = BlocksOp.GetBlocksByParts(theCompound, theParts)
- if BlocksOp.IsDone() == 0:
- print "GetBlocksByParts : ", BlocksOp.GetErrorCode()
- return aList
-
-## Multi-transformate block and glue the result.
-# Transformation is defined so, as to superpose direction faces.
-# @param Block Hexahedral solid to be multi-transformed.
-# @param DirFace1 ID of First direction face.
-# @param DirFace2 ID of Second direction face.
-# @param NbTimes Quantity of transformations to be done.
-# \note Unique ID of sub-shape can be obtained, using method GetSubShapeID().
-# @return New GEOM_Object, containing the result shape.
-#
-# Example: see GEOM_Spanner.py
-def MakeMultiTransformation1D(Block, DirFace1, DirFace2, NbTimes):
- anObj = BlocksOp.MakeMultiTransformation1D(Block, DirFace1, DirFace2, NbTimes)
- if BlocksOp.IsDone() == 0:
- print "MakeMultiTransformation1D : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Multi-transformate block and glue the result.
-# @param Block Hexahedral solid to be multi-transformed.
-# @param DirFace1U,DirFace2U IDs of Direction faces for the first transformation.
-# @param DirFace1V,DirFace2V IDs of Direction faces for the second transformation.
-# @param NbTimesU,NbTimesV Quantity of transformations to be done.
-# @return New GEOM_Object, containing the result shape.
-#
-# Example: see GEOM_Spanner.py
-def MakeMultiTransformation2D(Block, DirFace1U, DirFace2U, NbTimesU,
- DirFace1V, DirFace2V, NbTimesV):
- anObj = BlocksOp.MakeMultiTransformation2D(Block, DirFace1U, DirFace2U, NbTimesU,
- DirFace1V, DirFace2V, NbTimesV)
- if BlocksOp.IsDone() == 0:
- print "MakeMultiTransformation2D : ", BlocksOp.GetErrorCode()
- return anObj
-
-## Build all possible propagation groups.
-# Propagation group is a set of all edges, opposite to one (main)
-# edge of this group directly or through other opposite edges.
-# Notion of Opposite Edge make sence only on quadrangle face.
-# @param theShape Shape to build propagation groups on.
-# @return List of GEOM_Objects, each of them is a propagation group.
-#
-# Example: see GEOM_TestOthers.py
-def Propagate(theShape):
- listChains = BlocksOp.Propagate(theShape)
- if BlocksOp.IsDone() == 0:
- print "Propagate : ", BlocksOp.GetErrorCode()
- return listChains
-
-# -----------------------------------------------------------------------------
-# Group operations
-# -----------------------------------------------------------------------------
-
-## Creates a new group which will store sub shapes of theMainShape
-# @param theMainShape is a GEOM object on which the group is selected
-# @param theShapeType defines a shape type of the group
-# @return a newly created GEOM group
-#
-# Example: see GEOM_TestOthers.py
-def CreateGroup(theMainShape, theShapeType):
- anObj = GroupOp.CreateGroup(theMainShape, theShapeType)
- if GroupOp.IsDone() == 0:
- print "CreateGroup : ", GroupOp.GetErrorCode()
- return anObj
-
-## Adds a sub object with ID theSubShapeId to the group
-# @param theGroup is a GEOM group to which the new sub shape is added
-# @param theSubShapeID is a sub shape ID in the main object.
-# \note Use method GetSubShapeID() to get an unique ID of the sub shape
-#
-# Example: see GEOM_TestOthers.py
-def AddObject(theGroup, theSubShapeID):
- GroupOp.AddObject(theGroup, theSubShapeID)
- if GroupOp.IsDone() == 0:
- print "AddObject : ", GroupOp.GetErrorCode()
-
-## Removes a sub object with ID \a theSubShapeId from the group
-# @param theGroup is a GEOM group from which the new sub shape is removed
-# @param theSubShapeID is a sub shape ID in the main object.
-# \note Use method GetSubShapeID() to get an unique ID of the sub shape
-#
-# Example: see GEOM_TestOthers.py
-def RemoveObject(theGroup, theSubShapeID):
- GroupOp.RemoveObject(theGroup, theSubShapeID)
- if GroupOp.IsDone() == 0:
- print "RemoveObject : ", GroupOp.GetErrorCode()
-
-## Adds to the group all the given shapes. No errors, if some shapes are alredy included.
-# @param theGroup is a GEOM group to which the new sub shapes are added.
-# @param theSubShapes is a list of sub shapes to be added.
-#
-# Example: see GEOM_TestOthers.py
-def UnionList (theGroup, theSubShapes):
- GroupOp.UnionList(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "UnionList : ", GroupOp.GetErrorCode()
-
-## Works like the above method, but argument
-# theSubShapes here is a list of sub-shapes indices
-#
-# Example: see GEOM_TestOthers.py
-def UnionIDs(theGroup, theSubShapes):
- GroupOp.UnionIDs(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "UnionIDs : ", GroupOp.GetErrorCode()
-
-## Removes from the group all the given shapes. No errors, if some shapes are not included.
-# @param theGroup is a GEOM group from which the sub-shapes are removed.
-# @param theSubShapes is a list of sub-shapes to be removed.
-#
-# Example: see GEOM_TestOthers.py
-def DifferenceList (theGroup, theSubShapes):
- GroupOp.DifferenceList(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "DifferenceList : ", GroupOp.GetErrorCode()
-
-## Works like the above method, but argument
-# theSubShapes here is a list of sub-shapes indices
-#
-# Example: see GEOM_TestOthers.py
-def DifferenceIDs(theGroup, theSubShapes):
- GroupOp.DifferenceIDs(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "DifferenceIDs : ", GroupOp.GetErrorCode()
-
-## Returns a list of sub objects ID stored in the group
-# @param theGroup is a GEOM group for which a list of IDs is requested
-#
-# Example: see GEOM_TestOthers.py
-def GetObjectIDs(theGroup):
- ListIDs = GroupOp.GetObjects(theGroup)
- if GroupOp.IsDone() == 0:
- print "GetObjectIDs : ", GroupOp.GetErrorCode()
- return ListIDs
-
-## Returns a type of sub objects stored in the group
-# @param theGroup is a GEOM group which type is returned.
-#
-# Example: see GEOM_TestOthers.py
-def GetType(theGroup):
- aType = GroupOp.GetType(theGroup)
- if GroupOp.IsDone() == 0:
- print "GetType : ", GroupOp.GetErrorCode()
- return aType
-
-## Returns a main shape associated with the group
-# @param theGroup is a GEOM group for which a main shape object is requested
-# @return a GEOM object which is a main shape for theGroup
-#
-# Example: see GEOM_TestOthers.py
-def GetMainShape(theGroup):
- anObj = GroupOp.GetMainShape(theGroup)
- if GroupOp.IsDone() == 0:
- print "GetMainShape : ", GroupOp.GetErrorCode()
- return anObj
-
-## Create group of edges of theShape, whose length is in range [min_length, max_length].
-# If include_min/max == 0, edges with length == min/max_length will not be included in result.
-def GetEdgesByLength (theShape, min_length, max_length, include_min = 1, include_max = 1):
- edges = SubShapeAll(theShape, ShapeType["EDGE"])
- edges_in_range = []
- for edge in edges:
- Props = BasicProperties(edge)
- if min_length <= Props[0] and Props[0] <= max_length:
- if (not include_min) and (min_length == Props[0]):
- skip = 1
- else:
- if (not include_max) and (Props[0] == max_length):
- skip = 1
- else:
- edges_in_range.append(edge)
-
- if len(edges_in_range) <= 0:
- print "No edges found by given criteria"
- return 0
-
- group_edges = CreateGroup(theShape, ShapeType["EDGE"])
- UnionList(group_edges, edges_in_range)
-
- return group_edges
-
-## Create group of edges of selected shape, whose length is in range [min_length, max_length].
-# If include_min/max == 0, edges with length == min/max_length will not be included in result.
-def SelectEdges (min_length, max_length, include_min = 1, include_max = 1):
- nb_selected = sg.SelectedCount()
- if nb_selected < 1:
- print "Select a shape before calling this function, please."
- return 0
- if nb_selected > 1:
- print "Only one shape must be selected"
- return 0
-
- id_shape = sg.getSelected(0)
- shape = IDToObject( id_shape )
-
- group_edges = GetEdgesByLength(shape, min_length, max_length, include_min, include_max)
-
- left_str = " < "
- right_str = " < "
- if include_min: left_str = " <= "
- if include_max: right_str = " <= "
-
- addToStudyInFather(shape, group_edges, "Group of edges with " + `min_length`
- + left_str + "length" + right_str + `max_length`)
-
- sg.updateObjBrowser(1)
-
- return group_edges
-
-## Add Path to load python scripts from
-def addPath(Path):
- if (sys.path.count(Path) < 1):
- sys.path.append(Path)
+# Export the methods of geompyDC
+for k in dir(geom):
+ if k[0] == '_':continue
+ globals()[k]=getattr(geom,k)
+del k
+from geompyDC import ShapeType,GEOM,kind
--- /dev/null
+# GEOM GEOM_SWIG : binding of C++ omplementaion with Python
+#
+# Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+#
+#
+# File : geompy.py
+# Author : Paul RASCLE, EDF
+# Module : GEOM
+# $Header$
+"""
+ \namespace geompy
+ \brief Module geompy
+"""
+
+import salome
+salome.salome_init()
+from salome import *
+
+import GEOM
+
+# -----------------------------------------------------------------------------
+# enumeration ShapeType as a dictionary
+# -----------------------------------------------------------------------------
+
+ShapeType = {"COMPOUND":0, "COMPSOLID":1, "SOLID":2, "SHELL":3, "FACE":4, "WIRE":5, "EDGE":6, "VERTEX":7, "SHAPE":8}
+
+# -----------------------------------------------------------------------------
+# enumeration shape_kind
+# -----------------------------------------------------------------------------
+
+kind = GEOM.GEOM_IKindOfShape
+
+class info:
+ UNKNOWN = 0
+ CLOSED = 1
+ UNCLOSED = 2
+
+
+class geompyDC(GEOM._objref_GEOM_Gen):
+ def __init__(self):
+ GEOM._objref_GEOM_Gen.__init__(self)
+ self.myBuilder = None
+ self.myStudyId = 0
+ self.father = None
+
+ self.BasicOp = None
+ self.CurvesOp = None
+ self.PrimOp = None
+ self.ShapesOp = None
+ self.HealOp = None
+ self.InsertOp = None
+ self.BoolOp = None
+ self.TrsfOp = None
+ self.LocalOp = None
+ self.MeasuOp = None
+ self.BlocksOp = None
+ self.GroupOp = None
+ pass
+
+ def init_geom(self,theStudy):
+ self.myStudy = theStudy
+ self.myStudyId = self.myStudy._get_StudyId()
+ self.myBuilder = self.myStudy.NewBuilder()
+ self.father = self.myStudy.FindComponent("GEOM")
+ if self.father is None:
+ self.father = self.myBuilder.NewComponent("GEOM")
+ A1 = self.myBuilder.FindOrCreateAttribute(self.father, "AttributeName")
+ FName = A1._narrow(SALOMEDS.AttributeName)
+ FName.SetValue("Geometry")
+ A2 = self.myBuilder.FindOrCreateAttribute(self.father, "AttributePixMap")
+ aPixmap = A2._narrow(SALOMEDS.AttributePixMap)
+ aPixmap.SetPixMap("ICON_OBJBROWSER_Geometry")
+ self.myBuilder.DefineComponentInstance(self.father,self)
+ pass
+ self.BasicOp = self.GetIBasicOperations (self.myStudyId)
+ self.CurvesOp = self.GetICurvesOperations (self.myStudyId)
+ self.PrimOp = self.GetI3DPrimOperations (self.myStudyId)
+ self.ShapesOp = self.GetIShapesOperations (self.myStudyId)
+ self.HealOp = self.GetIHealingOperations (self.myStudyId)
+ self.InsertOp = self.GetIInsertOperations (self.myStudyId)
+ self.BoolOp = self.GetIBooleanOperations (self.myStudyId)
+ self.TrsfOp = self.GetITransformOperations(self.myStudyId)
+ self.LocalOp = self.GetILocalOperations (self.myStudyId)
+ self.MeasuOp = self.GetIMeasureOperations (self.myStudyId)
+ self.BlocksOp = self.GetIBlocksOperations (self.myStudyId)
+ self.GroupOp = self.GetIGroupOperations (self.myStudyId)
+ pass
+
+ ## Get name for sub-shape aSubObj of shape aMainObj
+ #
+ # Example: see GEOM_TestAll.py
+ def SubShapeName(self,aSubObj, aMainObj):
+ #aSubId = orb.object_to_string(aSubObj)
+ #aMainId = orb.object_to_string(aMainObj)
+ #index = gg.getIndexTopology(aSubId, aMainId)
+ #name = gg.getShapeTypeString(aSubId) + "_%d"%(index)
+ index = self.ShapesOp.GetTopologyIndex(aMainObj, aSubObj)
+ name = self.ShapesOp.GetShapeTypeString(aSubObj) + "_%d"%(index)
+ return name
+
+ ## Publish in study aShape with name aName
+ #
+ # Example: see GEOM_TestAll.py
+ def addToStudy(self,aShape, aName):
+ try:
+ aSObject = self.AddInStudy(self.myStudy, aShape, aName, None)
+ except:
+ print "addToStudy() failed"
+ return ""
+ return aShape.GetStudyEntry()
+
+ ## Publish in study aShape with name aName as sub-object of previously published aFather
+ #
+ # Example: see GEOM_TestAll.py
+ def addToStudyInFather(self,aFather, aShape, aName):
+ try:
+ aSObject = self.AddInStudy(myStudy, aShape, aName, aFather)
+ except:
+ print "addToStudyInFather() failed"
+ return ""
+ return aShape.GetStudyEntry()
+
+
+ # -----------------------------------------------------------------------------
+ # Basic primitives
+ # -----------------------------------------------------------------------------
+
+ ## Create point by three coordinates.
+ # @param theX The X coordinate of the point.
+ # @param theY The Y coordinate of the point.
+ # @param theZ The Z coordinate of the point.
+ # @return New GEOM_Object, containing the created point.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeVertex(self,theX, theY, theZ):
+ anObj = self.BasicOp.MakePointXYZ(theX, theY, theZ)
+ if self.BasicOp.IsDone() == 0:
+ print "MakePointXYZ : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a point, distant from the referenced point
+ # on the given distances along the coordinate axes.
+ # @param theReference The referenced point.
+ # @param theX Displacement from the referenced point along OX axis.
+ # @param theY Displacement from the referenced point along OY axis.
+ # @param theZ Displacement from the referenced point along OZ axis.
+ # @return New GEOM_Object, containing the created point.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeVertexWithRef(self,theReference, theX, theY, theZ):
+ anObj = self.BasicOp.MakePointWithReference(theReference, theX, theY, theZ)
+ if self.BasicOp.IsDone() == 0:
+ print "MakePointWithReference : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a point, corresponding to the given parameter on the given curve.
+ # @param theRefCurve The referenced curve.
+ # @param theParameter Value of parameter on the referenced curve.
+ # @return New GEOM_Object, containing the created point.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeVertexOnCurve(self,theRefCurve, theParameter):
+ anObj = self.BasicOp.MakePointOnCurve(theRefCurve, theParameter)
+ if self.BasicOp.IsDone() == 0:
+ print "MakePointOnCurve : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a tangent, corresponding to the given parameter on the given curve.
+ # @param theRefCurve The referenced curve.
+ # @param theParameter Value of parameter on the referenced curve.
+ # @return New GEOM_Object, containing the created tangent.
+ def MakeTangentOnCurve(self,theRefCurve, theParameter):
+ anObj = self.BasicOp.MakeTangentOnCurve(theRefCurve, theParameter)
+ if self.BasicOp.IsDone() == 0:
+ print "MakeTangentOnCurve : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a vector with the given components.
+ # @param theDX X component of the vector.
+ # @param theDY Y component of the vector.
+ # @param theDZ Z component of the vector.
+ # @return New GEOM_Object, containing the created vector.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeVectorDXDYDZ(self,theDX, theDY, theDZ):
+ anObj = self.BasicOp.MakeVectorDXDYDZ(theDX, theDY, theDZ)
+ if self.BasicOp.IsDone() == 0:
+ print "MakeVectorDXDYDZ : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a vector between two points.
+ # @param thePnt1 Start point for the vector.
+ # @param thePnt2 End point for the vector.
+ # @return New GEOM_Object, containing the created vector.
+
+ # Example: see GEOM_TestAll.py
+ def MakeVector(self,thePnt1, thePnt2):
+ anObj = self.BasicOp.MakeVectorTwoPnt(thePnt1, thePnt2)
+ if self.BasicOp.IsDone() == 0:
+ print "MakeVectorTwoPnt : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a line, passing through the given point
+ # and parrallel to the given direction
+ # @param thePnt Point. The resulting line will pass through it.
+ # @param theDir Direction. The resulting line will be parallel to it.
+ # @return New GEOM_Object, containing the created line.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeLine(self,thePnt, theDir):
+ anObj = self.BasicOp.MakeLine(thePnt, theDir)
+ if self.BasicOp.IsDone() == 0:
+ print "MakeLine : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a line, passing through the given points
+ # @param thePnt1 First of two points, defining the line.
+ # @param thePnt2 Second of two points, defining the line.
+ # @return New GEOM_Object, containing the created line.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeLineTwoPnt(self,thePnt1, thePnt2):
+ anObj = self.BasicOp.MakeLineTwoPnt(thePnt1, thePnt2)
+ if self.BasicOp.IsDone() == 0:
+ print "MakeLineTwoPnt : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a plane, passing through the given point
+ # and normal to the given vector.
+ # @param thePnt Point, the plane has to pass through.
+ # @param theVec Vector, defining the plane normal direction.
+ # @param theTrimSize Half size of a side of quadrangle face, representing the plane.
+ # @return New GEOM_Object, containing the created plane.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePlane(self,thePnt, theVec, theTrimSize):
+ anObj = self.BasicOp.MakePlanePntVec(thePnt, theVec, theTrimSize)
+ if self.BasicOp.IsDone() == 0:
+ print "MakePlanePntVec : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a plane, passing through the three given points
+ # @param thePnt1 First of three points, defining the plane.
+ # @param thePnt2 Second of three points, defining the plane.
+ # @param thePnt3 Fird of three points, defining the plane.
+ # @param theTrimSize Half size of a side of quadrangle face, representing the plane.
+ # @return New GEOM_Object, containing the created plane.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePlaneThreePnt(self,thePnt1, thePnt2, thePnt3, theTrimSize):
+ anObj = self.BasicOp.MakePlaneThreePnt(thePnt1, thePnt2, thePnt3, theTrimSize)
+ if self.BasicOp.IsDone() == 0:
+ print "MakePlaneThreePnt : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a plane, similar to the existing one, but with another size of representing face.
+ # @param theFace Referenced plane or LCS(Marker).
+ # @param theTrimSize New half size of a side of quadrangle face, representing the plane.
+ # @return New GEOM_Object, containing the created plane.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePlaneFace(self,theFace, theTrimSize):
+ anObj = self.BasicOp.MakePlaneFace(theFace, theTrimSize)
+ if self.BasicOp.IsDone() == 0:
+ print "MakePlaneFace : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a local coordinate system.
+ # @param OX,OY,OZ Three coordinates of coordinate system origin.
+ # @param XDX,XDY,XDZ Three components of OX direction
+ # @param YDX,YDY,YDZ Three components of OY direction
+ # @return New GEOM_Object, containing the created coordinate system.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeMarker(self,OX,OY,OZ, XDX,XDY,XDZ, YDX,YDY,YDZ):
+ anObj = self.BasicOp.MakeMarker(OX,OY,OZ, XDX,XDY,XDZ, YDX,YDY,YDZ)
+ if self.BasicOp.IsDone() == 0:
+ print "MakeMarker : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ ## Create a local coordinate system.
+ # @param theOrigin Point of coordinate system origin.
+ # @param theXVec Vector of X direction
+ # @param theYVec Vector of Y direction
+ # @return New GEOM_Object, containing the created coordinate system.
+ def MakeMarkerPntTwoVec(self,theOrigin, theXVec, theYVec):
+ O = self.PointCoordinates( theOrigin )
+ OXOY = []
+ for vec in [ theXVec, theYVec ]:
+ v1, v2 = self.SubShapeAll( vec, ShapeType["VERTEX"] )
+ p1 = self.PointCoordinates( v1 )
+ p2 = self.PointCoordinates( v2 )
+ for i in range( 0, 3 ):
+ OXOY.append( p2[i] - p1[i] )
+ #
+ anObj = self.BasicOp.MakeMarker( O[0], O[1], O[2],
+ OXOY[0], OXOY[1], OXOY[2],
+ OXOY[3], OXOY[4], OXOY[5], )
+ if self.BasicOp.IsDone() == 0:
+ print "MakeMarker : ", self.BasicOp.GetErrorCode()
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Curves
+ # -----------------------------------------------------------------------------
+
+ ## Create an arc of circle, passing through three given points.
+ # @param thePnt1 Start point of the arc.
+ # @param thePnt2 Middle point of the arc.
+ # @param thePnt3 End point of the arc.
+ # @return New GEOM_Object, containing the created arc.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeArc(self,thePnt1, thePnt2, thePnt3):
+ anObj = self.CurvesOp.MakeArc(thePnt1, thePnt2, thePnt3)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakeArc : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ ## Create an arc of circle from a center and 2 points.
+ # @param thePnt1 Center of the arc
+ # @param thePnt2 Start point of the arc. (Gives also the radius of the arc)
+ # @param thePnt3 End point of the arc (Gives also a direction)
+ # @return New GEOM_Object, containing the created arc.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeArcCenter(self,thePnt1, thePnt2, thePnt3,theSense):
+ anObj = self.CurvesOp.MakeArcCenter(thePnt1, thePnt2, thePnt3,theSense)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakeArcCenter : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ ## Create a circle with given center, normal vector and radius.
+ # @param thePnt Circle center.
+ # @param theVec Vector, normal to the plane of the circle.
+ # @param theR Circle radius.
+ # @return New GEOM_Object, containing the created circle.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeCircle(self,thePnt, theVec, theR):
+ anObj = self.CurvesOp.MakeCirclePntVecR(thePnt, theVec, theR)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakeCirclePntVecR : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ ## Create a circle, passing through three given points
+ # @param thePnt1,thePnt2,thePnt3 Points, defining the circle.
+ # @return New GEOM_Object, containing the created circle.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeCircleThreePnt(self,thePnt1, thePnt2, thePnt3):
+ anObj = self.CurvesOp.MakeCircleThreePnt(thePnt1, thePnt2, thePnt3)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakeCircleThreePnt : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ ## Create an ellipse with given center, normal vector and radiuses.
+ # @param thePnt Ellipse center.
+ # @param theVec Vector, normal to the plane of the ellipse.
+ # @param theRMajor Major ellipse radius.
+ # @param theRMinor Minor ellipse radius.
+ # @return New GEOM_Object, containing the created ellipse.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeEllipse(self,thePnt, theVec, theRMajor, theRMinor):
+ anObj = self.CurvesOp.MakeEllipse(thePnt, theVec, theRMajor, theRMinor)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakeEllipse : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ ## Create a polyline on the set of points.
+ # @param thePoints Sequence of points for the polyline.
+ # @return New GEOM_Object, containing the created polyline.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePolyline(self,thePoints):
+ anObj = self.CurvesOp.MakePolyline(thePoints)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakePolyline : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ ## Create bezier curve on the set of points.
+ # @param thePoints Sequence of points for the bezier curve.
+ # @return New GEOM_Object, containing the created bezier curve.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeBezier(self,thePoints):
+ anObj = self.CurvesOp.MakeSplineBezier(thePoints)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakeSplineBezier : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ ## Create B-Spline curve on the set of points.
+ # @param thePoints Sequence of points for the B-Spline curve.
+ # @return New GEOM_Object, containing the created B-Spline curve.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeInterpol(self,thePoints):
+ anObj = self.CurvesOp.MakeSplineInterpolation(thePoints)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakeSplineInterpolation : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ ## Create a sketcher (wire or face), following the textual description,
+ # passed through \a theCommand argument. \n
+ # Edges of the resulting wire or face will be arcs of circles and/or linear segments. \n
+ # Format of the description string have to be the following:
+ #
+ # "Sketcher[:F x1 y1]:CMD[:CMD[:CMD...]]"
+ #
+ # Where:
+ # - x1, y1 are coordinates of the first sketcher point (zero by default),
+ # - CMD is one of
+ # - "R angle" : Set the direction by angle
+ # - "D dx dy" : Set the direction by DX & DY
+ # .
+ # \n
+ # - "TT x y" : Create segment by point at X & Y
+ # - "T dx dy" : Create segment by point with DX & DY
+ # - "L length" : Create segment by direction & Length
+ # - "IX x" : Create segment by direction & Intersect. X
+ # - "IY y" : Create segment by direction & Intersect. Y
+ # .
+ # \n
+ # - "C radius length" : Create arc by direction, radius and length(in degree)
+ # .
+ # \n
+ # - "WW" : Close Wire (to finish)
+ # - "WF" : Close Wire and build face (to finish)
+ #
+ # @param theCommand String, defining the sketcher in local
+ # coordinates of the working plane.
+ # @param theWorkingPlane Nine double values, defining origin,
+ # OZ and OX directions of the working plane.
+ # @return New GEOM_Object, containing the created wire.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeSketcher(self,theCommand, theWorkingPlane = [0,0,0, 0,0,1, 1,0,0]):
+ anObj = self.CurvesOp.MakeSketcher(theCommand, theWorkingPlane)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakeSketcher : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ ## Create a sketcher (wire or face), following the textual description,
+ # passed through \a theCommand argument. \n
+ # For format of the description string see the previous method.\n
+ # @param theCommand String, defining the sketcher in local
+ # coordinates of the working plane.
+ # @param theWorkingPlane Planar Face or LCS(Marker) of the working plane.
+ # @return New GEOM_Object, containing the created wire.
+ def MakeSketcherOnPlane(self,theCommand, theWorkingPlane):
+ anObj = self.CurvesOp.MakeSketcherOnPlane(theCommand, theWorkingPlane)
+ if self.CurvesOp.IsDone() == 0:
+ print "MakeSketcher : ", self.CurvesOp.GetErrorCode()
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Create 3D Primitives
+ # -----------------------------------------------------------------------------
+
+ ## Create a box by coordinates of two opposite vertices.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeBox(self,x1,y1,z1,x2,y2,z2):
+ pnt1 = self.MakeVertex(x1,y1,z1)
+ pnt2 = self.MakeVertex(x2,y2,z2)
+ return self.MakeBoxTwoPnt(pnt1,pnt2)
+
+ ## Create a box with specified dimensions along the coordinate axes
+ # and with edges, parallel to the coordinate axes.
+ # Center of the box will be at point (DX/2, DY/2, DZ/2).
+ # @param theDX Length of Box edges, parallel to OX axis.
+ # @param theDY Length of Box edges, parallel to OY axis.
+ # @param theDZ Length of Box edges, parallel to OZ axis.
+ # @return New GEOM_Object, containing the created box.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeBoxDXDYDZ(self,theDX, theDY, theDZ):
+ anObj = self.PrimOp.MakeBoxDXDYDZ(theDX, theDY, theDZ)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeBoxDXDYDZ : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a box with two specified opposite vertices,
+ # and with edges, parallel to the coordinate axes
+ # @param thePnt1 First of two opposite vertices.
+ # @param thePnt2 Second of two opposite vertices.
+ # @return New GEOM_Object, containing the created box.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeBoxTwoPnt(self,thePnt1, thePnt2):
+ anObj = self.PrimOp.MakeBoxTwoPnt(thePnt1, thePnt2)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeBoxTwoPnt : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a cylinder with given base point, axis, radius and height.
+ # @param thePnt Central point of cylinder base.
+ # @param theAxis Cylinder axis.
+ # @param theR Cylinder radius.
+ # @param theH Cylinder height.
+ # @return New GEOM_Object, containing the created cylinder.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeCylinder(self,thePnt, theAxis, theR, theH):
+ anObj = self.PrimOp.MakeCylinderPntVecRH(thePnt, theAxis, theR, theH)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeCylinderPntVecRH : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a cylinder with given radius and height at
+ # the origin of coordinate system. Axis of the cylinder
+ # will be collinear to the OZ axis of the coordinate system.
+ # @param theR Cylinder radius.
+ # @param theH Cylinder height.
+ # @return New GEOM_Object, containing the created cylinder.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeCylinderRH(self,theR, theH):
+ anObj = self.PrimOp.MakeCylinderRH(theR, theH)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeCylinderRH : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a sphere with given center and radius.
+ # @param thePnt Sphere center.
+ # @param theR Sphere radius.
+ # @return New GEOM_Object, containing the created sphere.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeSpherePntR(self,thePnt, theR):
+ anObj = self.PrimOp.MakeSpherePntR(thePnt, theR)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeSpherePntR : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a sphere with given center and radius.
+ # @param x,y,z Coordinates of sphere center.
+ # @param theR Sphere radius.
+ # @return New GEOM_Object, containing the created sphere.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeSphere(self,x, y, z, theR):
+ point = self.MakeVertex(x, y, z)
+ anObj = self.MakeSpherePntR(point, theR)
+ return anObj
+
+ ## Create a sphere with given radius at the origin of coordinate system.
+ # @param theR Sphere radius.
+ # @return New GEOM_Object, containing the created sphere.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeSphereR(self,theR):
+ anObj = self.PrimOp.MakeSphereR(theR)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeSphereR : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a cone with given base point, axis, height and radiuses.
+ # @param thePnt Central point of the first cone base.
+ # @param theAxis Cone axis.
+ # @param theR1 Radius of the first cone base.
+ # @param theR2 Radius of the second cone base.
+ # \note If both radiuses are non-zero, the cone will be truncated.
+ # \note If the radiuses are equal, a cylinder will be created instead.
+ # @param theH Cone height.
+ # @return New GEOM_Object, containing the created cone.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeCone(self,thePnt, theAxis, theR1, theR2, theH):
+ anObj = self.PrimOp.MakeConePntVecR1R2H(thePnt, theAxis, theR1, theR2, theH)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeConePntVecR1R2H : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a cone with given height and radiuses at
+ # the origin of coordinate system. Axis of the cone will
+ # be collinear to the OZ axis of the coordinate system.
+ # @param theR1 Radius of the first cone base.
+ # @param theR2 Radius of the second cone base.
+ # \note If both radiuses are non-zero, the cone will be truncated.
+ # \note If the radiuses are equal, a cylinder will be created instead.
+ # @param theH Cone height.
+ # @return New GEOM_Object, containing the created cone.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeConeR1R2H(self,theR1, theR2, theH):
+ anObj = self.PrimOp.MakeConeR1R2H(theR1, theR2, theH)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeConeR1R2H : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a torus with given center, normal vector and radiuses.
+ # @param thePnt Torus central point.
+ # @param theVec Torus axis of symmetry.
+ # @param theRMajor Torus major radius.
+ # @param theRMinor Torus minor radius.
+ # @return New GEOM_Object, containing the created torus.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeTorus(self,thePnt, theVec, theRMajor, theRMinor):
+ anObj = self.PrimOp.MakeTorusPntVecRR(thePnt, theVec, theRMajor, theRMinor)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeTorusPntVecRR : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a torus with given radiuses at the origin of coordinate system.
+ # @param theRMajor Torus major radius.
+ # @param theRMinor Torus minor radius.
+ # @return New GEOM_Object, containing the created torus.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeTorusRR(self,theRMajor, theRMinor):
+ anObj = self.PrimOp.MakeTorusRR(theRMajor, theRMinor)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeTorusRR : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a shape by extrusion of the base shape along a vector, defined by two points.
+ # @param theBase Base shape to be extruded.
+ # @param thePoint1 First end of extrusion vector.
+ # @param thePoint2 Second end of extrusion vector.
+ # @return New GEOM_Object, containing the created prism.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePrism(self,theBase, thePoint1, thePoint2):
+ anObj = self.PrimOp.MakePrismTwoPnt(theBase, thePoint1, thePoint2)
+ if self.PrimOp.IsDone() == 0:
+ print "MakePrismTwoPnt : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a shape by extrusion of the base shape along the vector,
+ # i.e. all the space, transfixed by the base shape during its translation
+ # along the vector on the given distance.
+ # @param theBase Base shape to be extruded.
+ # @param theVec Direction of extrusion.
+ # @param theH Prism dimension along theVec.
+ # @return New GEOM_Object, containing the created prism.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePrismVecH(self,theBase, theVec, theH):
+ anObj = self.PrimOp.MakePrismVecH(theBase, theVec, theH)
+ if self.PrimOp.IsDone() == 0:
+ print "MakePrismVecH : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a shape by extrusion of the base shape along
+ # the path shape. The path shape can be a wire or an edge.
+ # @param theBase Base shape to be extruded.
+ # @param thePath Path shape to extrude the base shape along it.
+ # @return New GEOM_Object, containing the created pipe.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePipe(self,theBase, thePath):
+ anObj = self.PrimOp.MakePipe(theBase, thePath)
+ if self.PrimOp.IsDone() == 0:
+ print "MakePipe : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a shape by revolution of the base shape around the axis
+ # on the given angle, i.e. all the space, transfixed by the base
+ # shape during its rotation around the axis on the given angle.
+ # @param theBase Base shape to be rotated.
+ # @param theAxis Rotation axis.
+ # @param theAngle Rotation angle in radians.
+ # @return New GEOM_Object, containing the created revolution.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeRevolution(self,theBase, theAxis, theAngle):
+ anObj = self.PrimOp.MakeRevolutionAxisAngle(theBase, theAxis, theAngle)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeRevolutionAxisAngle : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a shell or solid passing through set of sections.Sections should be wires,edges or vertices.
+ # @param theSeqSections - set of specified sections.
+ # @param theModeSolid - mode defining building solid or shell
+ # @param thePreci - precision 3D used for smoothing by default 1.e-6
+ # @param theRuled - mode defining type of the result surfaces (ruled or smoothed).
+ # @return New GEOM_Object, containing the created shell or solid.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeThruSections(self,theSeqSections,theModeSolid,thePreci,theRuled):
+ anObj = self.PrimOp.MakeThruSections(theSeqSections,theModeSolid,thePreci,theRuled)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeThruSections : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a shape by extrusion of the profile shape along
+ # the path shape. The path shape can be a wire or an edge.
+ # the several profiles can be specified in the several locations of path.
+ # @param theSeqBases - list of Bases shape to be extruded.
+ # @param theLocations - list of locations on the path corresponding
+ # specified list of the Bases shapes. Number of locations
+ # should be equal to number of bases or list of locations can be empty.
+ # @param thePath - Path shape to extrude the base shape along it.
+ # @param theWithContact - the mode defining that the section is translated to be in
+ # contact with the spine.
+ # @param - WithCorrection - defining that the section is rotated to be
+ # orthogonal to the spine tangent in the correspondent point
+ # @return New GEOM_Object, containing the created pipe.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePipeWithDifferentSections(self,theSeqBases, theLocations,thePath,theWithContact,theWithCorrection):
+ anObj = self.PrimOp.MakePipeWithDifferentSections(theSeqBases, theLocations,thePath,theWithContact,theWithCorrection)
+ if self.PrimOp.IsDone() == 0:
+ print "MakePipeWithDifferentSections : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Create a shape by extrusion of the profile shape along
+ # the path shape. The path shape can be a shell or a face.
+ # the several profiles can be specified in the several locations of path.
+ # @param theSeqBases - list of Bases shape to be extruded.
+ # @param theSeqSubBases - list of corresponding subshapes of section shapes.
+ # @param theLocations - list of locations on the path corresponding
+ # specified list of the Bases shapes. Number of locations
+ # should be equal to number of bases or list of locations can be empty.
+ # @param thePath - Path shape to extrude the base shape along it.
+ # @param theWithContact - the mode defining that the section is translated to be in
+ # contact with the spine.
+ # @param - WithCorrection - defining that the section is rotated to be
+ # orthogonal to the spine tangent in the correspondent point
+ # @return New GEOM_Object, containing the created solids.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePipeWithShellSections(self,theSeqBases, theSeqSubBases,
+ theLocations, thePath,
+ theWithContact, theWithCorrection):
+ anObj = self.PrimOp.MakePipeWithShellSections(theSeqBases, theSeqSubBases,
+ theLocations, thePath,
+ theWithContact, theWithCorrection)
+ if self.PrimOp.IsDone() == 0:
+ print "MakePipeWithShellSections : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Create base shapes
+ # -----------------------------------------------------------------------------
+
+ ## Create a linear edge with specified ends.
+ # @param thePnt1 Point for the first end of edge.
+ # @param thePnt2 Point for the second end of edge.
+ # @return New GEOM_Object, containing the created edge.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeEdge(self,thePnt1, thePnt2):
+ anObj = self.ShapesOp.MakeEdge(thePnt1, thePnt2)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeEdge : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ ## Create a wire from the set of edges and wires.
+ # @param theEdgesAndWires List of edges and/or wires.
+ # @return New GEOM_Object, containing the created wire.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeWire(self,theEdgesAndWires):
+ anObj = self.ShapesOp.MakeWire(theEdgesAndWires)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeWire : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ ## Create a face on the given wire.
+ # @param theWire closed Wire or Edge to build the face on.
+ # @param isPlanarWanted If TRUE, only planar face will be built.
+ # If impossible, NULL object will be returned.
+ # @return New GEOM_Object, containing the created face.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeFace(self,theWire, isPlanarWanted):
+ anObj = self.ShapesOp.MakeFace(theWire, isPlanarWanted)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeFace : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ ## Create a face on the given wires set.
+ # @param theWires List of closed wires or edges to build the face on.
+ # @param isPlanarWanted If TRUE, only planar face will be built.
+ # If impossible, NULL object will be returned.
+ # @return New GEOM_Object, containing the created face.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeFaceWires(self,theWires, isPlanarWanted):
+ anObj = self.ShapesOp.MakeFaceWires(theWires, isPlanarWanted)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeFaceWires : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ ## Shortcut to MakeFaceWires()
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeFaces(self,theWires, isPlanarWanted):
+ anObj = self.MakeFaceWires(theWires, isPlanarWanted)
+ return anObj
+
+ ## Create a shell from the set of faces and shells.
+ # @param theFacesAndShells List of faces and/or shells.
+ # @return New GEOM_Object, containing the created shell.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeShell(self,theFacesAndShells):
+ anObj = self.ShapesOp.MakeShell(theFacesAndShells)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeShell : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ ## Create a solid, bounded by the given shells.
+ # @param theShells Sequence of bounding shells.
+ # @return New GEOM_Object, containing the created solid.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeSolid(self,theShells):
+ anObj = self.ShapesOp.MakeSolidShells(theShells)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeSolid : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ ## Create a compound of the given shapes.
+ # @param theShapes List of shapes to put in compound.
+ # @return New GEOM_Object, containing the created compound.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeCompound(self,theShapes):
+ anObj = self.ShapesOp.MakeCompound(theShapes)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeCompound : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ ## Gives quantity of faces in the given shape.
+ # @param theShape Shape to count faces of.
+ # @return Quantity of faces.
+ #
+ # Example: see GEOM_TestOthers.py
+ def NumberOfFaces(self,theShape):
+ nb_faces = self.ShapesOp.NumberOfFaces(theShape)
+ if self.ShapesOp.IsDone() == 0:
+ print "NumberOfFaces : ", self.ShapesOp.GetErrorCode()
+ return nb_faces
+
+ ## Gives quantity of edges in the given shape.
+ # @param theShape Shape to count edges of.
+ # @return Quantity of edges.
+ #
+ # Example: see GEOM_TestOthers.py
+ def NumberOfEdges(self,theShape):
+ nb_edges = self.ShapesOp.NumberOfEdges(theShape)
+ if self.ShapesOp.IsDone() == 0:
+ print "NumberOfEdges : ", self.ShapesOp.GetErrorCode()
+ return nb_edges
+
+ ## Reverses an orientation the given shape.
+ # @param theShape Shape to be reversed.
+ # @return The reversed copy of theShape.
+ #
+ # Example: see GEOM_TestAll.py
+ def ChangeOrientation(self,theShape):
+ anObj = self.ShapesOp.ChangeOrientation(theShape)
+ if self.ShapesOp.IsDone() == 0:
+ print "ChangeOrientation : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ ## Shortcut to ChangeOrientation()
+ #
+ # Example: see GEOM_TestOthers.py
+ def OrientationChange(self,theShape):
+ anObj = self.ChangeOrientation(theShape)
+ return anObj
+
+ ## Retrieve all free faces from the given shape.
+ # Free face is a face, which is not shared between two shells of the shape.
+ # @param theShape Shape to find free faces in.
+ # @return List of IDs of all free faces, contained in theShape.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetFreeFacesIDs(self,theShape):
+ anIDs = self.ShapesOp.GetFreeFacesIDs(theShape)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetFreeFacesIDs : ", self.ShapesOp.GetErrorCode()
+ return anIDs
+
+ ## Get all sub-shapes of theShape1 of the given type, shared with theShape2.
+ # @param theShape1 Shape to find sub-shapes in.
+ # @param theShape2 Shape to find shared sub-shapes with.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @return List of sub-shapes of theShape1, shared with theShape2.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetSharedShapes(self,theShape1, theShape2, theShapeType):
+ aList = self.ShapesOp.GetSharedShapes(theShape1, theShape2, theShapeType)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetSharedShapes : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ # the specified plane by the certain way, defined through \a theState parameter.
+ # @param theShape Shape to find sub-shapes of.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @param theAx1 Vector (or line, or linear edge), specifying normal
+ # direction and location of the plane to find shapes on.
+ # @param theState The state of the subshapes to find. It can be one of
+ # ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+ # @return List of all found sub-shapes.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnPlane(self,theShape, theShapeType, theAx1, theState):
+ aList = self.ShapesOp.GetShapesOnPlane(theShape, theShapeType, theAx1, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnPlane : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Works like the above method, but returns list of sub-shapes indices
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnPlaneIDs(self,theShape, theShapeType, theAx1, theState):
+ aList = self.ShapesOp.GetShapesOnPlaneIDs(theShape, theShapeType, theAx1, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnPlaneIDs : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ # the specified plane by the certain way, defined through \a theState parameter.
+ # @param theShape Shape to find sub-shapes of.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @param theAx1 Vector (or line, or linear edge), specifying normal
+ # direction of the plane to find shapes on.
+ # @param thePnt Point specifying location of the plane to find shapes on.
+ # @param theState The state of the subshapes to find. It can be one of
+ # ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+ # @return List of all found sub-shapes.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnPlaneWithLocation(self,theShape, theShapeType, theAx1, thePnt, theState):
+ aList = self.ShapesOp.GetShapesOnPlaneWithLocation(theShape, theShapeType, theAx1, thePnt, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnPlaneWithLocation : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Works like the above method, but returns list of sub-shapes indices
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnPlaneWithLocationIDs(self,theShape, theShapeType, theAx1, thePnt, theState):
+ aList = self.ShapesOp.GetShapesOnPlaneWithLocationIDs(theShape, theShapeType, theAx1, thePnt, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnPlaneWithLocationIDs : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ # the specified cylinder by the certain way, defined through \a theState parameter.
+ # @param theShape Shape to find sub-shapes of.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @param theAxis Vector (or line, or linear edge), specifying
+ # axis of the cylinder to find shapes on.
+ # @param theRadius Radius of the cylinder to find shapes on.
+ # @param theState The state of the subshapes to find. It can be one of
+ # ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+ # @return List of all found sub-shapes.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnCylinder(self,theShape, theShapeType, theAxis, theRadius, theState):
+ aList = self.ShapesOp.GetShapesOnCylinder(theShape, theShapeType, theAxis, theRadius, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnCylinder : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Works like the above method, but returns list of sub-shapes indices
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnCylinderIDs(self,theShape, theShapeType, theAxis, theRadius, theState):
+ aList = self.ShapesOp.GetShapesOnCylinderIDs(theShape, theShapeType, theAxis, theRadius, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnCylinderIDs : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ # the specified sphere by the certain way, defined through \a theState parameter.
+ # @param theShape Shape to find sub-shapes of.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @param theCenter Point, specifying center of the sphere to find shapes on.
+ # @param theRadius Radius of the sphere to find shapes on.
+ # @param theState The state of the subshapes to find. It can be one of
+ # ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+ # @return List of all found sub-shapes.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnSphere(self,theShape, theShapeType, theCenter, theRadius, theState):
+ aList = self.ShapesOp.GetShapesOnSphere(theShape, theShapeType, theCenter, theRadius, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnSphere : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Works like the above method, but returns list of sub-shapes indices
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnSphereIDs(self,theShape, theShapeType, theCenter, theRadius, theState):
+ aList = self.ShapesOp.GetShapesOnSphereIDs(theShape, theShapeType, theCenter, theRadius, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnSphereIDs : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ # the specified quadrangle by the certain way, defined through \a theState parameter.
+ # @param theShape Shape to find sub-shapes of.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @param theTopLeftPoint Point, specifying top left corner of a quadrangle
+ # @param theTopRigthPoint Point, specifying top right corner of a quadrangle
+ # @param theBottomLeftPoint Point, specifying bottom left corner of a quadrangle
+ # @param theBottomRigthPoint Point, specifying bottom right corner of a quadrangle
+ # @param theState The state of the subshapes to find. It can be one of
+ # ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+ # @return List of all found sub-shapes.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnQuadrangle(self,theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState):
+ aList = self.ShapesOp.GetShapesOnQuadrangle(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnQuadrangle : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Works like the above method, but returns list of sub-shapes indices
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetShapesOnQuadrangleIDs(self,theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState):
+ aList = self.ShapesOp.GetShapesOnQuadrangleIDs(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnQuadrangleIDs : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ # the specified \a theBox by the certain way, defined through \a theState parameter.
+ # @param theBox Shape for relative comparing.
+ # @param theShape Shape to find sub-shapes of.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @param theState The state of the subshapes to find. It can be one of
+ # ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+ # @return List of all found sub-shapes.
+ #
+ def GetShapesOnBox(self,theBox, theShape, theShapeType, theState):
+ aList = self.ShapesOp.GetShapesOnBox(theBox, theShape, theShapeType, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnBox : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Works like the above method, but returns list of sub-shapes indices
+ #
+ def GetShapesOnBoxIDs(self,theBox, theShape, theShapeType, theState):
+ aList = self.ShapesOp.GetShapesOnBoxIDs(theBox, theShape, theShapeType, theState)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetShapesOnBoxIDs : ", self.ShapesOp.GetErrorCode()
+ return aList
+
+ ## Get sub-shape(s) of theShapeWhere, which are
+ # coincident with \a theShapeWhat or could be a part of it.
+ # @param theShapeWhere Shape to find sub-shapes of.
+ # @param theShapeWhat Shape, specifying what to find.
+ # @return Group of all found sub-shapes or a single found sub-shape.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetInPlace(self,theShapeWhere, theShapeWhat):
+ anObj = self.ShapesOp.GetInPlace(theShapeWhere, theShapeWhat)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetInPlace : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ ## Get sub-shape of theShapeWhere, which is
+ # equal to \a theShapeWhat.
+ # @param theShapeWhere Shape to find sub-shape of.
+ # @param theShapeWhat Shape, specifying what to find.
+ # @return New GEOM_Object for found sub-shape.
+ #
+ def GetSame(self,theShapeWhere, theShapeWhat):
+ anObj = self.ShapesOp.GetSame(theShapeWhere, theShapeWhat)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetSame : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Access to sub-shapes by their unique IDs inside the main shape.
+ # -----------------------------------------------------------------------------
+
+ ## Obtain a composite sub-shape of <aShape>, composed from sub-shapes
+ # of <aShape>, selected by their unique IDs inside <aShape>
+ #
+ # Example: see GEOM_TestAll.py
+ def GetSubShape(self,aShape, ListOfID):
+ anObj = self.AddSubShape(aShape,ListOfID)
+ return anObj
+
+ ## Obtain unique ID of sub-shape <aSubShape> inside <aShape>
+ #
+ # Example: see GEOM_TestAll.py
+ def GetSubShapeID(self,aShape, aSubShape):
+ anID = self.LocalOp.GetSubShapeIndex(aShape, aSubShape)
+ if self.LocalOp.IsDone() == 0:
+ print "GetSubShapeIndex : ", self.LocalOp.GetErrorCode()
+ return anID
+
+ # -----------------------------------------------------------------------------
+ # Decompose objects
+ # -----------------------------------------------------------------------------
+
+ ## Explode a shape on subshapes of a given type.
+ # @param theShape Shape to be exploded.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @return List of sub-shapes of type theShapeType, contained in theShape.
+ #
+ # Example: see GEOM_TestAll.py
+ def SubShapeAll(self,aShape, aType):
+ ListObj = self.ShapesOp.MakeExplode(aShape,aType,0)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeExplode : ", self.ShapesOp.GetErrorCode()
+ return ListObj
+
+ ## Explode a shape on subshapes of a given type.
+ # @param theShape Shape to be exploded.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @return List of IDs of sub-shapes.
+ def SubShapeAllIDs(self,aShape, aType):
+ ListObj = self.ShapesOp.SubShapeAllIDs(aShape,aType,0)
+ if self.ShapesOp.IsDone() == 0:
+ print "SubShapeAllIDs : ", self.ShapesOp.GetErrorCode()
+ return ListObj
+
+ ## Explode a shape on subshapes of a given type.
+ # Sub-shapes will be sorted by coordinates of their gravity centers.
+ # @param theShape Shape to be exploded.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @return List of sub-shapes of type theShapeType, contained in theShape.
+ #
+ # Example: see GEOM_TestAll.py
+ def SubShapeAllSorted(self,aShape, aType):
+ ListObj = self.ShapesOp.MakeExplode(aShape,aType,1)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeExplode : ", self.ShapesOp.GetErrorCode()
+ return ListObj
+
+ ## Explode a shape on subshapes of a given type.
+ # Sub-shapes will be sorted by coordinates of their gravity centers.
+ # @param theShape Shape to be exploded.
+ # @param theShapeType Type of sub-shapes to be retrieved.
+ # @return List of IDs of sub-shapes.
+ def SubShapeAllSortedIDs(self,aShape, aType):
+ ListIDs = self.ShapesOp.SubShapeAllIDs(aShape,aType,1)
+ if self.ShapesOp.IsDone() == 0:
+ print "SubShapeAllSortedIDs : ", self.ShapesOp.GetErrorCode()
+ return ListIDs
+
+ ## Obtain a compound of sub-shapes of <aShape>,
+ # selected by they indices in list of all sub-shapes of type <aType>.
+ # Each index is in range [1, Nb_Sub-Shapes_Of_Given_Type]
+ #
+ # Example: see GEOM_TestAll.py
+ def SubShape(self,aShape, aType, ListOfInd):
+ ListOfIDs = []
+ AllShapeList = self.SubShapeAll(aShape, aType)
+ for ind in ListOfInd:
+ ListOfIDs.append(self.GetSubShapeID(aShape, AllShapeList[ind - 1]))
+ anObj = self.GetSubShape(aShape, ListOfIDs)
+ return anObj
+
+ ## Obtain a compound of sub-shapes of <aShape>,
+ # selected by they indices in sorted list of all sub-shapes of type <aType>.
+ # Each index is in range [1, Nb_Sub-Shapes_Of_Given_Type]
+ #
+ # Example: see GEOM_TestAll.py
+ def SubShapeSorted(self,aShape, aType, ListOfInd):
+ ListOfIDs = []
+ AllShapeList = self.SubShapeAllSorted(aShape, aType)
+ for ind in ListOfInd:
+ ListOfIDs.append(self.GetSubShapeID(aShape, AllShapeList[ind - 1]))
+ anObj = self.GetSubShape(aShape, ListOfIDs)
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Healing operations
+ # -----------------------------------------------------------------------------
+
+ ## Apply a sequence of Shape Healing operators to the given object.
+ # @param theShape Shape to be processed.
+ # @param theOperators List of names of operators ("FixShape", "SplitClosedFaces", etc.).
+ # @param theParameters List of names of parameters
+ # ("FixShape.Tolerance3d", "SplitClosedFaces.NbSplitPoints", etc.).
+ # @param theValues List of values of parameters, in the same order
+ # as parameters are listed in \a theParameters list.
+ # @return New GEOM_Object, containing processed shape.
+ #
+ # Example: see GEOM_TestHealing.py
+ def ProcessShape(self,theShape, theOperators, theParameters, theValues):
+ anObj = self.HealOp.ProcessShape(theShape, theOperators, theParameters, theValues)
+ if self.HealOp.IsDone() == 0:
+ print "ProcessShape : ", self.HealOp.GetErrorCode()
+ return anObj
+
+ ## Remove faces from the given object (shape).
+ # @param theObject Shape to be processed.
+ # @param theFaces Indices of faces to be removed, if EMPTY then the method
+ # removes ALL faces of the given object.
+ # @return New GEOM_Object, containing processed shape.
+ #
+ # Example: see GEOM_TestHealing.py
+ def SuppressFaces(self,theObject, theFaces):
+ anObj = self.HealOp.SuppressFaces(theObject, theFaces)
+ if self.HealOp.IsDone() == 0:
+ print "SuppressFaces : ", self.HealOp.GetErrorCode()
+ return anObj
+
+ ## Sewing of some shapes into single shape.
+ #
+ # Example: see GEOM_TestHealing.py
+ def MakeSewing(self,ListShape, theTolerance):
+ comp = self.MakeCompound(ListShape)
+ anObj = self.Sew(comp, theTolerance)
+ return anObj
+
+ ## Sewing of the given object.
+ # @param theObject Shape to be processed.
+ # @param theTolerance Required tolerance value.
+ # @return New GEOM_Object, containing processed shape.
+ #
+ # Example: see MakeSewing() above
+ def Sew(self,theObject, theTolerance):
+ anObj = self.HealOp.Sew(theObject, theTolerance)
+ if self.HealOp.IsDone() == 0:
+ print "Sew : ", self.HealOp.GetErrorCode()
+ return anObj
+
+ ## Remove internal wires and edges from the given object (face).
+ # @param theObject Shape to be processed.
+ # @param theWires Indices of wires to be removed, if EMPTY then the method
+ # removes ALL internal wires of the given object.
+ # @return New GEOM_Object, containing processed shape.
+ #
+ # Example: see GEOM_TestHealing.py
+ def SuppressInternalWires(self,theObject, theWires):
+ anObj = self.HealOp.RemoveIntWires(theObject, theWires)
+ if self.HealOp.IsDone() == 0:
+ print "SuppressInternalWires : ", self.HealOp.GetErrorCode()
+ return anObj
+
+ ## Remove internal closed contours (holes) from the given object.
+ # @param theObject Shape to be processed.
+ # @param theWires Indices of wires to be removed, if EMPTY then the method
+ # removes ALL internal holes of the given object
+ # @return New GEOM_Object, containing processed shape.
+ #
+ # Example: see GEOM_TestHealing.py
+ def SuppressHoles(self,theObject, theWires):
+ anObj = self.HealOp.FillHoles(theObject, theWires)
+ if self.HealOp.IsDone() == 0:
+ print "SuppressHoles : ", self.HealOp.GetErrorCode()
+ return anObj
+
+ ## Close an open wire.
+ # @param theObject Shape to be processed.
+ # @param theWires Indexes of edge(s) and wire(s) to be closed within <VAR>theObject</VAR>'s shape,
+ # if -1, then theObject itself is a wire.
+ # @param isCommonVertex If TRUE : closure by creation of a common vertex,
+ # If FALS : closure by creation of an edge between ends.
+ # @return New GEOM_Object, containing processed shape.
+ #
+ # Example: see GEOM_TestHealing.py
+ def CloseContour(self,theObject, theWires, isCommonVertex):
+ anObj = self.HealOp.CloseContour(theObject, theWires, isCommonVertex)
+ if self.HealOp.IsDone() == 0:
+ print "CloseContour : ", self.HealOp.GetErrorCode()
+ return anObj
+
+ ## Addition of a point to a given edge object.
+ # @param theObject Shape to be processed.
+ # @param theEdgeIndex Index of edge to be divided within theObject's shape,
+ # if -1, then theObject itself is the edge.
+ # @param theValue Value of parameter on edge or length parameter,
+ # depending on \a isByParameter.
+ # @param isByParameter If TRUE : \a theValue is treated as a curve parameter [0..1],
+ # if FALSE : \a theValue is treated as a length parameter [0..1]
+ # @return New GEOM_Object, containing processed shape.
+ #
+ # Example: see GEOM_TestHealing.py
+ def DivideEdge(self,theObject, theEdgeIndex, theValue, isByParameter):
+ anObj = self.HealOp.DivideEdge(theObject, theEdgeIndex, theValue, isByParameter)
+ if self.HealOp.IsDone() == 0:
+ print "DivideEdge : ", self.HealOp.GetErrorCode()
+ return anObj
+
+ ## Change orientation of the given object.
+ # @param theObject Shape to be processed.
+ # @update given shape
+ def ChangeOrientationShell(self,theObject):
+ theObject = self.HealOp.ChangeOrientation(theObject)
+ if self.HealOp.IsDone() == 0:
+ print "ChangeOrientation : ", self.HealOp.GetErrorCode()
+ pass
+ pass
+
+ ## Change orientation of the given object.
+ # @param theObject Shape to be processed.
+ # @return New GEOM_Object, containing processed shape.
+ def ChangeOrientationShellCopy(self,theObject):
+ anObj = self.HealOp.ChangeOrientationCopy(theObject)
+ if self.HealOp.IsDone() == 0:
+ print "ChangeOrientation : ", self.HealOp.GetErrorCode()
+ return anObj
+
+ ## Get a list of wires (wrapped in GEOM_Object-s),
+ # that constitute a free boundary of the given shape.
+ # @param theObject Shape to get free boundary of.
+ # @return [status, theClosedWires, theOpenWires]
+ # status: FALSE, if an error(s) occured during the method execution.
+ # theClosedWires: Closed wires on the free boundary of the given shape.
+ # theOpenWires: Open wires on the free boundary of the given shape.
+ #
+ # Example: see GEOM_TestHealing.py
+ def GetFreeBoundary(self,theObject):
+ anObj = self.HealOp.GetFreeBoundary(theObject)
+ if self.HealOp.IsDone() == 0:
+ print "GetFreeBoundaries : ", self.HealOp.GetErrorCode()
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Create advanced objects
+ # -----------------------------------------------------------------------------
+
+ ## Create a copy of the given object
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeCopy(self,theOriginal):
+ anObj = self.InsertOp.MakeCopy(theOriginal)
+ if self.InsertOp.IsDone() == 0:
+ print "MakeCopy : ", self.InsertOp.GetErrorCode()
+ return anObj
+
+ ## Create a filling from the given compound of contours.
+ # @param theShape the compound of contours
+ # @param theMinDeg a minimal degree
+ # @param theMaxDeg a maximal degree
+ # @param theTol2D a 2d tolerance
+ # @param theTol3D a 3d tolerance
+ # @param theNbIter a number of iteration
+ # @return New GEOM_Object, containing the created filling surface.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeFilling(self,theShape, theMinDeg, theMaxDeg, theTol2D, theTol3D, theNbIter):
+ anObj = self.PrimOp.MakeFilling(theShape, theMinDeg, theMaxDeg, theTol2D, theTol3D, theNbIter)
+ if self.PrimOp.IsDone() == 0:
+ print "MakeFilling : ", self.PrimOp.GetErrorCode()
+ return anObj
+
+ ## Replace coincident faces in theShape by one face.
+ # @param theShape Initial shape.
+ # @param theTolerance Maximum distance between faces, which can be considered as coincident.
+ # @return New GEOM_Object, containing a copy of theShape without coincident faces.
+ #
+ # Example: see GEOM_Spanner.py
+ def MakeGlueFaces(self,theShape, theTolerance):
+ anObj = self.ShapesOp.MakeGlueFaces(theShape, theTolerance)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeGlueFaces : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+
+ ## Find coincident faces in theShape for possible gluing.
+ # @param theShape Initial shape.
+ # @param theTolerance Maximum distance between faces,
+ # which can be considered as coincident.
+ # @return ListOfGO.
+ #
+ # Example: see GEOM_Spanner.py
+ def GetGlueFaces(self,theShape, theTolerance):
+ anObj = self.ShapesOp.GetGlueFaces(theShape, theTolerance)
+ if self.ShapesOp.IsDone() == 0:
+ print "GetGlueFaces : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+
+ ## Replace coincident faces in theShape by one face
+ # in compliance with given list of faces
+ # @param theShape Initial shape.
+ # @param theTolerance Maximum distance between faces,
+ # which can be considered as coincident.
+ # @param theFaces List of faces for gluing.
+ # @return New GEOM_Object, containing a copy of theShape
+ # without some faces.
+ #
+ # Example: see GEOM_Spanner.py
+ def MakeGlueFacesByList(self,theShape, theTolerance, theFaces):
+ anObj = self.ShapesOp.MakeGlueFacesByList(theShape, theTolerance, theFaces)
+ if self.ShapesOp.IsDone() == 0:
+ print "MakeGlueFacesByList : ", self.ShapesOp.GetErrorCode()
+ return anObj
+
+
+ # -----------------------------------------------------------------------------
+ # Boolean (Common, Cut, Fuse, Section)
+ # -----------------------------------------------------------------------------
+
+ ## Perform one of boolean operations on two given shapes.
+ # @param theShape1 First argument for boolean operation.
+ # @param theShape2 Second argument for boolean operation.
+ # @param theOperation Indicates the operation to be done:
+ # 1 - Common, 2 - Cut, 3 - Fuse, 4 - Section.
+ # @return New GEOM_Object, containing the result shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeBoolean(self,theShape1, theShape2, theOperation):
+ anObj = self.BoolOp.MakeBoolean(theShape1, theShape2, theOperation)
+ if self.BoolOp.IsDone() == 0:
+ print "MakeBoolean : ", self.BoolOp.GetErrorCode()
+ return anObj
+
+ ## Shortcut to MakeBoolean(s1, s2, 1)
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeCommon(self, s1, s2):
+ return self.MakeBoolean(s1, s2, 1)
+
+ ## Shortcut to MakeBoolean(s1, s2, 2)
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeCut(self, s1, s2):
+ return self.MakeBoolean(s1, s2, 2)
+
+ ## Shortcut to MakeBoolean(s1, s2, 3)
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeFuse(self, s1, s2):
+ return self.MakeBoolean(s1, s2, 3)
+
+ ## Shortcut to MakeBoolean(s1, s2, 4)
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeSection(self, s1, s2):
+ return self.MakeBoolean(s1, s2, 4)
+
+ ## Perform partition operation.
+ # @param ListShapes Shapes to be intersected.
+ # @param ListTools Shapes to intersect theShapes.
+ # !!!NOTE: Each compound from ListShapes and ListTools will be exploded
+ # in order to avoid possible intersection between shapes from
+ # this compound.
+ # @param Limit Type of resulting shapes (corresponding to TopAbs_ShapeEnum).
+ #
+ # After implementation new version of PartitionAlgo (October 2006)
+ # other parameters are ignored by current functionality. They are kept
+ # in this function only for support old versions.
+ # Ignored parameters:
+ # @param ListKeepInside Shapes, outside which the results will be deleted.
+ # Each shape from theKeepInside must belong to theShapes also.
+ # @param ListRemoveInside Shapes, inside which the results will be deleted.
+ # Each shape from theRemoveInside must belong to theShapes also.
+ # @param RemoveWebs If TRUE, perform Glue 3D algorithm.
+ # @param ListMaterials Material indices for each shape. Make sence,
+ # only if theRemoveWebs is TRUE.
+ #
+ # @return New GEOM_Object, containing the result shapes.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePartition(self,ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
+ Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[]):
+ anObj = self.BoolOp.MakePartition(ListShapes, ListTools,
+ ListKeepInside, ListRemoveInside,
+ Limit, RemoveWebs, ListMaterials);
+ if self.BoolOp.IsDone() == 0:
+ print "MakePartition : ", self.BoolOp.GetErrorCode()
+ return anObj
+
+ ## Perform partition operation.
+ # This method may be useful if it is needed to make a partition for
+ # compound contains nonintersected shapes. Performance will be better
+ # since intersection between shapes from compound is not performed.
+ #
+ # Description of all parameters as in previous method MakePartition()
+ #
+ # !!!NOTE: Passed compounds (via ListShapes or via ListTools)
+ # have to consist of nonintersecting shapes.
+ #
+ # @return New GEOM_Object, containing the result shapes.
+ #
+ def MakePartitionNonSelfIntersectedShape(self,ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
+ Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[]):
+ anObj = self.BoolOp.MakePartitionNonSelfIntersectedShape(ListShapes, ListTools,
+ ListKeepInside, ListRemoveInside,
+ Limit, RemoveWebs, ListMaterials);
+ if self.BoolOp.IsDone() == 0:
+ print "MakePartitionNonSelfIntersectedShape : ", self.BoolOp.GetErrorCode()
+ return anObj
+
+ ## Shortcut to MakePartition()
+ #
+ # Example: see GEOM_TestOthers.py
+ def Partition(self,ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
+ Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[]):
+ anObj = self.MakePartition(ListShapes, ListTools,
+ ListKeepInside, ListRemoveInside,
+ Limit, RemoveWebs, ListMaterials);
+ return anObj
+
+ ## Perform partition of the Shape with the Plane
+ # @param theShape Shape to be intersected.
+ # @param thePlane Tool shape, to intersect theShape.
+ # @return New GEOM_Object, containing the result shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeHalfPartition(self,theShape, thePlane):
+ anObj = self.BoolOp.MakeHalfPartition(theShape, thePlane)
+ if self.BoolOp.IsDone() == 0:
+ print "MakeHalfPartition : ", self.BoolOp.GetErrorCode()
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Transform objects
+ # -----------------------------------------------------------------------------
+
+ ## Translate the given object along the vector, specified
+ # by its end points, creating its copy before the translation.
+ # @param theObject The object to be translated.
+ # @param thePoint1 Start point of translation vector.
+ # @param thePoint2 End point of translation vector.
+ # @return New GEOM_Object, containing the translated object.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeTranslationTwoPoints(self,theObject, thePoint1, thePoint2):
+ anObj = self.TrsfOp.TranslateTwoPointsCopy(theObject, thePoint1, thePoint2)
+ if self.TrsfOp.IsDone() == 0:
+ print "TranslateTwoPointsCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Translate the given object along the vector, specified
+ # by its components, creating its copy before the translation.
+ # @param theObject The object to be translated.
+ # @param theDX,theDY,theDZ Components of translation vector.
+ # @return New GEOM_Object, containing the translated object.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeTranslation(self,theObject, theDX, theDY, theDZ):
+ anObj = self.TrsfOp.TranslateDXDYDZCopy(theObject, theDX, theDY, theDZ)
+ if self.TrsfOp.IsDone() == 0:
+ print "TranslateDXDYDZCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Translate the given object along the given vector,
+ # creating its copy before the translation.
+ # @param theObject The object to be translated.
+ # @param theVector The translation vector.
+ # @return New GEOM_Object, containing the translated object.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeTranslationVector(self,theObject, theVector):
+ anObj = self.TrsfOp.TranslateVectorCopy(theObject, theVector)
+ if self.TrsfOp.IsDone() == 0:
+ print "TranslateVectorCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Rotate the given object around the given axis
+ # on the given angle, creating its copy before the rotatation.
+ # @param theObject The object to be rotated.
+ # @param theAxis Rotation axis.
+ # @param theAngle Rotation angle in radians.
+ # @return New GEOM_Object, containing the rotated object.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeRotation(self,theObject, theAxis, theAngle):
+ anObj = self.TrsfOp.RotateCopy(theObject, theAxis, theAngle)
+ if self.TrsfOp.IsDone() == 0:
+ print "RotateCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Rotate given object around vector perpendicular to plane
+ # containing three points, creating its copy before the rotatation.
+ # @param theObject The object to be rotated.
+ # @param theCentPoint central point - the axis is the vector perpendicular to the plane
+ # containing the three points.
+ # @param thePoint1 and thePoint2 - in a perpendicular plan of the axis.
+ # @return New GEOM_Object, containing the rotated object.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeRotationThreePoints(self,theObject, theCentPoint, thePoint1, thePoint2):
+ anObj = self.TrsfOp.RotateThreePointsCopy(theObject, theCentPoint, thePoint1, thePoint2)
+ if self.TrsfOp.IsDone() == 0:
+ print "RotateThreePointsCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Scale the given object by the factor, creating its copy before the scaling.
+ # @param theObject The object to be scaled.
+ # @param thePoint Center point for scaling.
+ # @param theFactor Scaling factor value.
+ # @return New GEOM_Object, containing the scaled shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeScaleTransform(self,theObject, thePoint, theFactor):
+ anObj = self.TrsfOp.ScaleShapeCopy(theObject, thePoint, theFactor)
+ if self.TrsfOp.IsDone() == 0:
+ print "ScaleShapeCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Create an object, symmetrical
+ # to the given one relatively the given plane.
+ # @param theObject The object to be mirrored.
+ # @param thePlane Plane of symmetry.
+ # @return New GEOM_Object, containing the mirrored shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeMirrorByPlane(self,theObject, thePlane):
+ anObj = self.TrsfOp.MirrorPlaneCopy(theObject, thePlane)
+ if self.TrsfOp.IsDone() == 0:
+ print "MirrorPlaneCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Create an object, symmetrical
+ # to the given one relatively the given axis.
+ # @param theObject The object to be mirrored.
+ # @param theAxis Axis of symmetry.
+ # @return New GEOM_Object, containing the mirrored shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeMirrorByAxis(self,theObject, theAxis):
+ anObj = self.TrsfOp.MirrorAxisCopy(theObject, theAxis)
+ if self.TrsfOp.IsDone() == 0:
+ print "MirrorAxisCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Create an object, symmetrical
+ # to the given one relatively the given point.
+ # @param theObject The object to be mirrored.
+ # @param thePoint Point of symmetry.
+ # @return New GEOM_Object, containing the mirrored shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeMirrorByPoint(self,theObject, thePoint):
+ anObj = self.TrsfOp.MirrorPointCopy(theObject, thePoint)
+ if self.TrsfOp.IsDone() == 0:
+ print "MirrorPointCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Modify the Location of the given object by LCS,
+ # creating its copy before the setting.
+ # @param theObject The object to be displaced.
+ # @param theStartLCS Coordinate system to perform displacement from it.
+ # If \a theStartLCS is NULL, displacement
+ # will be performed from global CS.
+ # If \a theObject itself is used as \a theStartLCS,
+ # its location will be changed to \a theEndLCS.
+ # @param theEndLCS Coordinate system to perform displacement to it.
+ # @return New GEOM_Object, containing the displaced shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakePosition(self,theObject, theStartLCS, theEndLCS):
+ anObj = self.TrsfOp.PositionShapeCopy(theObject, theStartLCS, theEndLCS)
+ if self.TrsfOp.IsDone() == 0:
+ print "PositionShapeCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Create new object as offset of the given one.
+ # @param theObject The base object for the offset.
+ # @param theOffset Offset value.
+ # @return New GEOM_Object, containing the offset object.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeOffset(self,theObject, theOffset):
+ anObj = self.TrsfOp.OffsetShapeCopy(theObject, theOffset)
+ if self.TrsfOp.IsDone() == 0:
+ print "OffsetShapeCopy : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Patterns
+ # -----------------------------------------------------------------------------
+
+ ## Translate the given object along the given vector a given number times
+ # @param theObject The object to be translated.
+ # @param theVector Direction of the translation.
+ # @param theStep Distance to translate on.
+ # @param theNbTimes Quantity of translations to be done.
+ # @return New GEOM_Object, containing compound of all
+ # the shapes, obtained after each translation.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeMultiTranslation1D(self,theObject, theVector, theStep, theNbTimes):
+ anObj = self.TrsfOp.MultiTranslate1D(theObject, theVector, theStep, theNbTimes)
+ if self.TrsfOp.IsDone() == 0:
+ print "MultiTranslate1D : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Conseqently apply two specified translations to theObject specified number of times.
+ # @param theObject The object to be translated.
+ # @param theVector1 Direction of the first translation.
+ # @param theStep1 Step of the first translation.
+ # @param theNbTimes1 Quantity of translations to be done along theVector1.
+ # @param theVector2 Direction of the second translation.
+ # @param theStep2 Step of the second translation.
+ # @param theNbTimes2 Quantity of translations to be done along theVector2.
+ # @return New GEOM_Object, containing compound of all
+ # the shapes, obtained after each translation.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeMultiTranslation2D(self,theObject, theVector1, theStep1, theNbTimes1,
+ theVector2, theStep2, theNbTimes2):
+ anObj = self.TrsfOp.MultiTranslate2D(theObject, theVector1, theStep1, theNbTimes1,
+ theVector2, theStep2, theNbTimes2)
+ if self.TrsfOp.IsDone() == 0:
+ print "MultiTranslate2D : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Rotate the given object around the given axis a given number times.
+ # Rotation angle will be 2*PI/theNbTimes.
+ # @param theObject The object to be rotated.
+ # @param theAxis The rotation axis.
+ # @param theNbTimes Quantity of rotations to be done.
+ # @return New GEOM_Object, containing compound of all the
+ # shapes, obtained after each rotation.
+ #
+ # Example: see GEOM_TestAll.py
+ def MultiRotate1D(self,theObject, theAxis, theNbTimes):
+ anObj = self.TrsfOp.MultiRotate1D(theObject, theAxis, theNbTimes)
+ if self.TrsfOp.IsDone() == 0:
+ print "MultiRotate1D : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## Rotate the given object around the
+ # given axis on the given angle a given number
+ # times and multi-translate each rotation result.
+ # Translation direction passes through center of gravity
+ # of rotated shape and its projection on the rotation axis.
+ # @param theObject The object to be rotated.
+ # @param theAxis Rotation axis.
+ # @param theAngle Rotation angle in graduces.
+ # @param theNbTimes1 Quantity of rotations to be done.
+ # @param theStep Translation distance.
+ # @param theNbTimes2 Quantity of translations to be done.
+ # @return New GEOM_Object, containing compound of all the
+ # shapes, obtained after each transformation.
+ #
+ # Example: see GEOM_TestAll.py
+ def MultiRotate2D(self,theObject, theAxis, theAngle, theNbTimes1, theStep, theNbTimes2):
+ anObj = self.TrsfOp.MultiRotate2D(theObject, theAxis, theAngle, theNbTimes1, theStep, theNbTimes2)
+ if self.TrsfOp.IsDone() == 0:
+ print "MultiRotate2D : ", self.TrsfOp.GetErrorCode()
+ return anObj
+
+ ## The same, as MultiRotate1D(), but axis is given by direction and point
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeMultiRotation1D(self,aShape,aDir,aPoint,aNbTimes):
+ aVec = self.MakeLine(aPoint,aDir)
+ anObj = self.MultiRotate1D(aShape,aVec,aNbTimes)
+ return anObj
+
+ ## The same, as MultiRotate2D(), but axis is given by direction and point
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeMultiRotation2D(self,aShape,aDir,aPoint,anAngle,nbtimes1,aStep,nbtimes2):
+ aVec = self.MakeLine(aPoint,aDir)
+ anObj = self.MultiRotate2D(aShape,aVec,anAngle,nbtimes1,aStep,nbtimes2)
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Local operations
+ # -----------------------------------------------------------------------------
+
+ ## Perform a fillet on all edges of the given shape.
+ # @param theShape Shape, to perform fillet on.
+ # @param theR Fillet radius.
+ # @return New GEOM_Object, containing the result shape.
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeFilletAll(self,theShape, theR):
+ anObj = self.LocalOp.MakeFilletAll(theShape, theR)
+ if self.LocalOp.IsDone() == 0:
+ print "MakeFilletAll : ", self.LocalOp.GetErrorCode()
+ return anObj
+
+ ## Perform a fillet on the specified edges/faces of the given shape
+ # @param theShape Shape, to perform fillet on.
+ # @param theR Fillet radius.
+ # @param theShapeType Type of shapes in <theListShapes>.
+ # @param theListShapes Global indices of edges/faces to perform fillet on.
+ # \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
+ # @return New GEOM_Object, containing the result shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeFillet(self,theShape, theR, theShapeType, theListShapes):
+ anObj = None
+ if theShapeType == ShapeType["EDGE"]:
+ anObj = self.LocalOp.MakeFilletEdges(theShape, theR, theListShapes)
+ else:
+ anObj = self.LocalOp.MakeFilletFaces(theShape, theR, theListShapes)
+ if self.LocalOp.IsDone() == 0:
+ print "MakeFillet : ", self.LocalOp.GetErrorCode()
+ return anObj
+
+ ## Perform a symmetric chamfer on all edges of the given shape.
+ # @param theShape Shape, to perform chamfer on.
+ # @param theD Chamfer size along each face.
+ # @return New GEOM_Object, containing the result shape.
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeChamferAll(self,theShape, theD):
+ anObj = self.LocalOp.MakeChamferAll(theShape, theD)
+ if self.LocalOp.IsDone() == 0:
+ print "MakeChamferAll : ", self.LocalOp.GetErrorCode()
+ return anObj
+
+ ## Perform a chamfer on edges, common to the specified faces,
+ # with distance D1 on the Face1
+ # @param theShape Shape, to perform chamfer on.
+ # @param theD1 Chamfer size along \a theFace1.
+ # @param theD2 Chamfer size along \a theFace2.
+ # @param theFace1,theFace2 Global indices of two faces of \a theShape.
+ # \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
+ # @return New GEOM_Object, containing the result shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeChamferEdge(self,theShape, theD1, theD2, theFace1, theFace2):
+ anObj = self.LocalOp.MakeChamferEdge(theShape, theD1, theD2, theFace1, theFace2)
+ if self.LocalOp.IsDone() == 0:
+ print "MakeChamferEdge : ", self.LocalOp.GetErrorCode()
+ return anObj
+
+ ## Perform a chamfer on all edges of the specified faces,
+ # with distance D1 on the first specified face (if several for one edge)
+ # @param theShape Shape, to perform chamfer on.
+ # @param theD1 Chamfer size along face from \a theFaces. If both faces,
+ # connected to the edge, are in \a theFaces, \a theD1
+ # will be get along face, which is nearer to \a theFaces beginning.
+ # @param theD2 Chamfer size along another of two faces, connected to the edge.
+ # @param theFaces Sequence of global indices of faces of \a theShape.
+ # \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
+ # @return New GEOM_Object, containing the result shape.
+ #
+ # Example: see GEOM_TestAll.py
+ def MakeChamferFaces(self,theShape, theD1, theD2, theFaces):
+ anObj = self.LocalOp.MakeChamferFaces(theShape, theD1, theD2, theFaces)
+ if self.LocalOp.IsDone() == 0:
+ print "MakeChamferFaces : ", self.LocalOp.GetErrorCode()
+ return anObj
+
+ ## Shortcut to MakeChamferEdge() and MakeChamferFaces()
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeChamfer(self,aShape,d1,d2,aShapeType,ListShape):
+ anObj = None
+ if aShapeType == ShapeType["EDGE"]:
+ anObj = self.MakeChamferEdge(aShape,d1,d2,ListShape[0],ListShape[1])
+ else:
+ anObj = self.MakeChamferFaces(aShape,d1,d2,ListShape)
+ return anObj
+
+ ## Perform an Archimde operation on the given shape with given parameters.
+ # The object presenting the resulting face is returned.
+ # @param theShape Shape to be put in water.
+ # @param theWeight Weight og the shape.
+ # @param theWaterDensity Density of the water.
+ # @param theMeshDeflection Deflection of the mesh, using to compute the section.
+ # @return New GEOM_Object, containing a section of \a theShape
+ # by a plane, corresponding to water level.
+ #
+ # Example: see GEOM_TestAll.py
+ def Archimede(self,theShape, theWeight, theWaterDensity, theMeshDeflection):
+ anObj = self.LocalOp.MakeArchimede(theShape, theWeight, theWaterDensity, theMeshDeflection)
+ if self.LocalOp.IsDone() == 0:
+ print "MakeArchimede : ", self.LocalOp.GetErrorCode()
+ return anObj
+
+ # -----------------------------------------------------------------------------
+ # Information objects
+ # -----------------------------------------------------------------------------
+
+ ## Get point coordinates
+ # @return [x, y, z]
+ #
+ # Example: see GEOM_TestMeasures.py
+ def PointCoordinates(self,Point):
+ aTuple = self.MeasuOp.PointCoordinates(Point)
+ if self.MeasuOp.IsDone() == 0:
+ print "PointCoordinates : ", self.MeasuOp.GetErrorCode()
+ return aTuple
+
+ ## Get summarized length of all wires,
+ # area of surface and volume of the given shape.
+ # @param theShape Shape to define properties of.
+ # @return [theLength, theSurfArea, theVolume]
+ # theLength: Summarized length of all wires of the given shape.
+ # theSurfArea: Area of surface of the given shape.
+ # theVolume: Volume of the given shape.
+ #
+ # Example: see GEOM_TestMeasures.py
+ def BasicProperties(self,theShape):
+ aTuple = self.MeasuOp.GetBasicProperties(theShape)
+ if self.MeasuOp.IsDone() == 0:
+ print "BasicProperties : ", self.MeasuOp.GetErrorCode()
+ return aTuple
+
+ ## Get parameters of bounding box of the given shape
+ # @param theShape Shape to obtain bounding box of.
+ # @return [Xmin,Xmax, Ymin,Ymax, Zmin,Zmax]
+ # Xmin,Xmax: Limits of shape along OX axis.
+ # Ymin,Ymax: Limits of shape along OY axis.
+ # Zmin,Zmax: Limits of shape along OZ axis.
+ #
+ # Example: see GEOM_TestMeasures.py
+ def BoundingBox(self,theShape):
+ aTuple = self.MeasuOp.GetBoundingBox(theShape)
+ if self.MeasuOp.IsDone() == 0:
+ print "BoundingBox : ", self.MeasuOp.GetErrorCode()
+ return aTuple
+
+ ## Get inertia matrix and moments of inertia of theShape.
+ # @param theShape Shape to calculate inertia of.
+ # @return [I11,I12,I13, I21,I22,I23, I31,I32,I33, Ix,Iy,Iz]
+ # I(1-3)(1-3): Components of the inertia matrix of the given shape.
+ # Ix,Iy,Iz: Moments of inertia of the given shape.
+ #
+ # Example: see GEOM_TestMeasures.py
+ def Inertia(self,theShape):
+ aTuple = self.MeasuOp.GetInertia(theShape)
+ if self.MeasuOp.IsDone() == 0:
+ print "Inertia : ", self.MeasuOp.GetErrorCode()
+ return aTuple
+
+ ## Get minimal distance between the given shapes.
+ # @param theShape1,theShape2 Shapes to find minimal distance between.
+ # @return Value of the minimal distance between the given shapes.
+ #
+ # Example: see GEOM_TestMeasures.py
+ def MinDistance(self,theShape1, theShape2):
+ aTuple = self.MeasuOp.GetMinDistance(theShape1, theShape2)
+ if self.MeasuOp.IsDone() == 0:
+ print "MinDistance : ", self.MeasuOp.GetErrorCode()
+ return aTuple[0]
+
+ ## Get min and max tolerances of sub-shapes of theShape
+ # @param theShape Shape, to get tolerances of.
+ # @return [FaceMin,FaceMax, EdgeMin,EdgeMax, VertMin,VertMax]
+ # FaceMin,FaceMax: Min and max tolerances of the faces.
+ # EdgeMin,EdgeMax: Min and max tolerances of the edges.
+ # VertMin,VertMax: Min and max tolerances of the vertices.
+ #
+ # Example: see GEOM_TestMeasures.py
+ def Tolerance(self,theShape):
+ aTuple = self.MeasuOp.GetTolerance(theShape)
+ if self.MeasuOp.IsDone() == 0:
+ print "Tolerance : ", self.MeasuOp.GetErrorCode()
+ return aTuple
+
+ ## Obtain description of the given shape (number of sub-shapes of each type)
+ # @param theShape Shape to be described.
+ # @return Description of the given shape.
+ #
+ # Example: see GEOM_TestMeasures.py
+ def WhatIs(self,theShape):
+ aDescr = self.MeasuOp.WhatIs(theShape)
+ if self.MeasuOp.IsDone() == 0:
+ print "WhatIs : ", self.MeasuOp.GetErrorCode()
+ return aDescr
+
+ ## Get a point, situated at the centre of mass of theShape.
+ # @param theShape Shape to define centre of mass of.
+ # @return New GEOM_Object, containing the created point.
+ #
+ # Example: see GEOM_TestMeasures.py
+ def MakeCDG(self,theShape):
+ anObj = self.MeasuOp.GetCentreOfMass(theShape)
+ if self.MeasuOp.IsDone() == 0:
+ print "GetCentreOfMass : ", self.MeasuOp.GetErrorCode()
+ return anObj
+
+ ## Check a topology of the given shape.
+ # @param theShape Shape to check validity of.
+ # @param theIsCheckGeom If FALSE, only the shape's topology will be checked,
+ # if TRUE, the shape's geometry will be checked also.
+ # @return TRUE, if the shape "seems to be valid".
+ # If theShape is invalid, prints a description of problem.
+ #
+ # Example: see GEOM_TestMeasures.py
+ def CheckShape(self,theShape, theIsCheckGeom = 0):
+ if theIsCheckGeom:
+ (IsValid, Status) = self.MeasuOp.CheckShapeWithGeometry(theShape)
+ else:
+ (IsValid, Status) = self.MeasuOp.CheckShape(theShape)
+
+ if self.MeasuOp.IsDone() == 0:
+ print "CheckShape : ", self.MeasuOp.GetErrorCode()
+ else:
+ if IsValid == 0:
+ print Status
+ return IsValid
+
+ ## Get position (LCS) of theShape.
+ #
+ # Origin of the LCS is situated at the shape's center of mass.
+ # Axes of the LCS are obtained from shape's location or,
+ # if the shape is a planar face, from position of its plane.
+ #
+ # @param theShape Shape to calculate position of.
+ # @return [Ox,Oy,Oz, Zx,Zy,Zz, Xx,Xy,Xz].
+ # Ox,Oy,Oz: Coordinates of shape's LCS origin.
+ # Zx,Zy,Zz: Coordinates of shape's LCS normal(main) direction.
+ # Xx,Xy,Xz: Coordinates of shape's LCS X direction.
+ #
+ # Example: see GEOM_TestMeasures.py
+ def GetPosition(self,theShape):
+ aTuple = self.MeasuOp.GetPosition(theShape)
+ if self.MeasuOp.IsDone() == 0:
+ print "GetPosition : ", self.MeasuOp.GetErrorCode()
+ return aTuple
+
+ ## Get kind of theShape.
+ #
+ # @param theShape Shape to get a kind of.
+ # @return Returns a kind of shape in terms of <VAR>GEOM_IKindOfShape.shape_kind</VAR> enumeration
+ # and a list of parameters, describing the shape.
+ # @note Concrete meaning of each value, returned via \a theIntegers
+ # or \a theDoubles list depends on the kind of the shape.
+ # The full list of possible outputs is:
+ #
+ # geompy.kind.COMPOUND nb_solids nb_faces nb_edges nb_vertices
+ # geompy.kind.COMPSOLID nb_solids nb_faces nb_edges nb_vertices
+ #
+ # geompy.kind.SHELL geompy.info.CLOSED nb_faces nb_edges nb_vertices
+ # geompy.kind.SHELL geompy.info.UNCLOSED nb_faces nb_edges nb_vertices
+ #
+ # geompy.kind.WIRE geompy.info.CLOSED nb_edges nb_vertices
+ # geompy.kind.WIRE geompy.info.UNCLOSED nb_edges nb_vertices
+ #
+ # geompy.kind.SPHERE xc yc zc R
+ # geompy.kind.CYLINDER xb yb zb dx dy dz R H
+ # geompy.kind.BOX xc yc zc ax ay az
+ # geompy.kind.ROTATED_BOX xc yc zc zx zy zz xx xy xz ax ay az
+ # geompy.kind.TORUS xc yc zc dx dy dz R_1 R_2
+ # geompy.kind.CONE xb yb zb dx dy dz R_1 R_2 H
+ # geompy.kind.POLYHEDRON nb_faces nb_edges nb_vertices
+ # geompy.kind.SOLID nb_faces nb_edges nb_vertices
+ #
+ # geompy.kind.SPHERE2D xc yc zc R
+ # geompy.kind.CYLINDER2D xb yb zb dx dy dz R H
+ # geompy.kind.TORUS2D xc yc zc dx dy dz R_1 R_2
+ # geompy.kind.CONE2D xc yc zc dx dy dz R_1 R_2 H
+ # geompy.kind.DISK_CIRCLE xc yc zc dx dy dz R
+ # geompy.kind.DISK_ELLIPSE xc yc zc dx dy dz R_1 R_2
+ # geompy.kind.POLYGON xo yo zo dx dy dz nb_edges nb_vertices
+ # geompy.kind.PLANE xo yo zo dx dy dz
+ # geompy.kind.PLANAR xo yo zo dx dy dz nb_edges nb_vertices
+ # geompy.kind.FACE nb_edges nb_vertices
+ #
+ # geompy.kind.CIRCLE xc yc zc dx dy dz R
+ # geompy.kind.ARC_CIRCLE xc yc zc dx dy dz R x1 y1 z1 x2 y2 z2
+ # geompy.kind.ELLIPSE xc yc zc dx dy dz R_1 R_2
+ # geompy.kind.ARC_ELLIPSE xc yc zc dx dy dz R_1 R_2 x1 y1 z1 x2 y2 z2
+ # geompy.kind.LINE xo yo zo dx dy dz
+ # geompy.kind.SEGMENT x1 y1 z1 x2 y2 z2
+ # geompy.kind.EDGE nb_vertices
+ #
+ # geompy.kind.VERTEX x y z
+ #
+ # Example: see GEOM_TestMeasures.py
+ def KindOfShape(self,theShape):
+ aRoughTuple = self.MeasuOp.KindOfShape(theShape)
+ if self.MeasuOp.IsDone() == 0:
+ print "KindOfShape : ", self.MeasuOp.GetErrorCode()
+ return []
+
+ aKind = aRoughTuple[0]
+ anInts = aRoughTuple[1]
+ aDbls = aRoughTuple[2]
+
+ # Now there is no exception from this rule:
+ aKindTuple = [aKind] + aDbls + anInts
+
+ # If they are we will regroup parameters for such kind of shape.
+ # For example:
+ #if aKind == kind.SOME_KIND:
+ # # SOME_KIND int int double int double double
+ # aKindTuple = [aKind, anInts[0], anInts[1], aDbls[0], anInts[2], aDbls[1], aDbls[2]]
+
+ return aKindTuple
+
+ # -----------------------------------------------------------------------------
+ # Import/Export objects
+ # -----------------------------------------------------------------------------
+
+ ## Import a shape from the BREP or IGES or STEP file
+ # (depends on given format) with given name.
+ # @param theFileName The file, containing the shape.
+ # @param theFormatName Specify format for the file reading.
+ # Available formats can be obtained with InsertOp.ImportTranslators() method.
+ # @return New GEOM_Object, containing the imported shape.
+ #
+ # Example: see GEOM_TestOthers.py
+ def Import(self,theFileName, theFormatName):
+ anObj = self.InsertOp.Import(theFileName, theFormatName)
+ if self.InsertOp.IsDone() == 0:
+ print "Import : ", self.InsertOp.GetErrorCode()
+ return anObj
+
+ ## Shortcut to Import() for BREP format
+ #
+ # Example: see GEOM_TestOthers.py
+ def ImportBREP(self,theFileName):
+ return self.Import(theFileName, "BREP")
+
+ ## Shortcut to Import() for IGES format
+ #
+ # Example: see GEOM_TestOthers.py
+ def ImportIGES(self,theFileName):
+ return self.Import(theFileName, "IGES")
+
+ ## Shortcut to Import() for STEP format
+ #
+ # Example: see GEOM_TestOthers.py
+ def ImportSTEP(self,theFileName):
+ return self.Import(theFileName, "STEP")
+
+ ## Export the given shape into a file with given name.
+ # @param theObject Shape to be stored in the file.
+ # @param theFileName Name of the file to store the given shape in.
+ # @param theFormatName Specify format for the shape storage.
+ # Available formats can be obtained with InsertOp.ImportTranslators() method.
+ #
+ # Example: see GEOM_TestOthers.py
+ def Export(self,theObject, theFileName, theFormatName):
+ self.InsertOp.Export(theObject, theFileName, theFormatName)
+ if self.InsertOp.IsDone() == 0:
+ print "Export : ", self.InsertOp.GetErrorCode()
+ pass
+ pass
+
+ ## Shortcut to Export() for BREP format
+ #
+ # Example: see GEOM_TestOthers.py
+ def ExportBREP(self,theObject, theFileName):
+ return self.Export(theObject, theFileName, "BREP")
+
+ ## Shortcut to Export() for IGES format
+ #
+ # Example: see GEOM_TestOthers.py
+ def ExportIGES(self,theObject, theFileName):
+ return self.Export(theObject, theFileName, "IGES")
+
+ ## Shortcut to Export() for STEP format
+ #
+ # Example: see GEOM_TestOthers.py
+ def ExportSTEP(self,theObject, theFileName):
+ return self.Export(theObject, theFileName, "STEP")
+
+ # -----------------------------------------------------------------------------
+ # Block operations
+ # -----------------------------------------------------------------------------
+
+ ## Create a quadrangle face from four edges. Order of Edges is not
+ # important. It is not necessary that edges share the same vertex.
+ # @param E1,E2,E3,E4 Edges for the face bound.
+ # @return New GEOM_Object, containing the created face.
+ #
+ # Example: see GEOM_Spanner.py
+ def MakeQuad(self,E1, E2, E3, E4):
+ anObj = self.BlocksOp.MakeQuad(E1, E2, E3, E4)
+ if self.BlocksOp.IsDone() == 0:
+ print "MakeQuad : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Create a quadrangle face on two edges.
+ # The missing edges will be built by creating the shortest ones.
+ # @param E1,E2 Two opposite edges for the face.
+ # @return New GEOM_Object, containing the created face.
+ #
+ # Example: see GEOM_Spanner.py
+ def MakeQuad2Edges(self,E1, E2):
+ anObj = self.BlocksOp.MakeQuad2Edges(E1, E2)
+ if self.BlocksOp.IsDone() == 0:
+ print "MakeQuad2Edges : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Create a quadrangle face with specified corners.
+ # The missing edges will be built by creating the shortest ones.
+ # @param V1,V2,V3,V4 Corner vertices for the face.
+ # @return New GEOM_Object, containing the created face.
+ #
+ # Example: see GEOM_Spanner.py
+ def MakeQuad4Vertices(self,V1, V2, V3, V4):
+ anObj = self.BlocksOp.MakeQuad4Vertices(V1, V2, V3, V4)
+ if self.BlocksOp.IsDone() == 0:
+ print "MakeQuad4Vertices : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Create a hexahedral solid, bounded by the six given faces. Order of
+ # faces is not important. It is not necessary that Faces share the same edge.
+ # @param F1,F2,F3,F4,F5,F6 Faces for the hexahedral solid.
+ # @return New GEOM_Object, containing the created solid.
+ #
+ # Example: see GEOM_Spanner.py
+ def MakeHexa(self,F1, F2, F3, F4, F5, F6):
+ anObj = self.BlocksOp.MakeHexa(F1, F2, F3, F4, F5, F6)
+ if self.BlocksOp.IsDone() == 0:
+ print "MakeHexa : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Create a hexahedral solid between two given faces.
+ # The missing faces will be built by creating the smallest ones.
+ # @param F1,F2 Two opposite faces for the hexahedral solid.
+ # @return New GEOM_Object, containing the created solid.
+ #
+ # Example: see GEOM_Spanner.py
+ def MakeHexa2Faces(self,F1, F2):
+ anObj = self.BlocksOp.MakeHexa2Faces(F1, F2)
+ if self.BlocksOp.IsDone() == 0:
+ print "MakeHexa2Faces : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Get a vertex, found in the given shape by its coordinates.
+ # @param theShape Block or a compound of blocks.
+ # @param theX,theY,theZ Coordinates of the sought vertex.
+ # @param theEpsilon Maximum allowed distance between the resulting
+ # vertex and point with the given coordinates.
+ # @return New GEOM_Object, containing the found vertex.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetPoint(self,theShape, theX, theY, theZ, theEpsilon):
+ anObj = self.BlocksOp.GetPoint(theShape, theX, theY, theZ, theEpsilon)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetPoint : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Get an edge, found in the given shape by two given vertices.
+ # @param theShape Block or a compound of blocks.
+ # @param thePoint1,thePoint2 Points, close to the ends of the desired edge.
+ # @return New GEOM_Object, containing the found edge.
+ #
+ # Example: see GEOM_Spanner.py
+ def GetEdge(self,theShape, thePoint1, thePoint2):
+ anObj = self.BlocksOp.GetEdge(theShape, thePoint1, thePoint2)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetEdge : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Find an edge of the given shape, which has minimal distance to the given point.
+ # @param theShape Block or a compound of blocks.
+ # @param thePoint Point, close to the desired edge.
+ # @return New GEOM_Object, containing the found edge.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetEdgeNearPoint(self,theShape, thePoint):
+ anObj = self.BlocksOp.GetEdgeNearPoint(theShape, thePoint)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetEdgeNearPoint : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Returns a face, found in the given shape by four given corner vertices.
+ # @param theShape Block or a compound of blocks.
+ # @param thePoint1-thePoint4 Points, close to the corners of the desired face.
+ # @return New GEOM_Object, containing the found face.
+ #
+ # Example: see GEOM_Spanner.py
+ def GetFaceByPoints(self,theShape, thePoint1, thePoint2, thePoint3, thePoint4):
+ anObj = self.BlocksOp.GetFaceByPoints(theShape, thePoint1, thePoint2, thePoint3, thePoint4)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetFaceByPoints : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Get a face of block, found in the given shape by two given edges.
+ # @param theShape Block or a compound of blocks.
+ # @param theEdge1,theEdge2 Edges, close to the edges of the desired face.
+ # @return New GEOM_Object, containing the found face.
+ #
+ # Example: see GEOM_Spanner.py
+ def GetFaceByEdges(self,theShape, theEdge1, theEdge2):
+ anObj = self.BlocksOp.GetFaceByEdges(theShape, theEdge1, theEdge2)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetFaceByEdges : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Find a face, opposite to the given one in the given block.
+ # @param theBlock Must be a hexahedral solid.
+ # @param theFace Face of \a theBlock, opposite to the desired face.
+ # @return New GEOM_Object, containing the found face.
+ #
+ # Example: see GEOM_Spanner.py
+ def GetOppositeFace(self,theBlock, theFace):
+ anObj = self.BlocksOp.GetOppositeFace(theBlock, theFace)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetOppositeFace : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Find a face of the given shape, which has minimal distance to the given point.
+ # @param theShape Block or a compound of blocks.
+ # @param thePoint Point, close to the desired face.
+ # @return New GEOM_Object, containing the found face.
+ #
+ # Example: see GEOM_Spanner.py
+ def GetFaceNearPoint(self,theShape, thePoint):
+ anObj = self.BlocksOp.GetFaceNearPoint(theShape, thePoint)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetFaceNearPoint : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Find a face of block, whose outside normale has minimal angle with the given vector.
+ # @param theShape Block or a compound of blocks.
+ # @param theVector Vector, close to the normale of the desired face.
+ # @return New GEOM_Object, containing the found face.
+ #
+ # Example: see GEOM_Spanner.py
+ def GetFaceByNormale(self,theBlock, theVector):
+ anObj = self.BlocksOp.GetFaceByNormale(theBlock, theVector)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetFaceByNormale : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Check, if the compound of blocks is given.
+ # To be considered as a compound of blocks, the
+ # given shape must satisfy the following conditions:
+ # - Each element of the compound should be a Block (6 faces and 12 edges).
+ # - A connection between two Blocks should be an entire quadrangle face or an entire edge.
+ # - The compound should be connexe.
+ # - The glue between two quadrangle faces should be applied.
+ # @param theCompound The compound to check.
+ # @return TRUE, if the given shape is a compound of blocks.
+ # If theCompound is not valid, prints all discovered errors.
+ #
+ # Example: see GEOM_Spanner.py
+ def CheckCompoundOfBlocks(self,theCompound):
+ (IsValid, BCErrors) = self.BlocksOp.CheckCompoundOfBlocks(theCompound)
+ if self.BlocksOp.IsDone() == 0:
+ print "CheckCompoundOfBlocks : ", self.BlocksOp.GetErrorCode()
+ else:
+ if IsValid == 0:
+ Descr = self.BlocksOp.PrintBCErrors(theCompound, BCErrors)
+ print Descr
+ return IsValid
+
+ ## Remove all seam and degenerated edges from \a theShape.
+ # Unite faces and edges, sharing one surface. It means that
+ # this faces must have references to one C++ surface object (handle).
+ # @param theShape The compound or single solid to remove irregular edges from.
+ # @return Improved shape.
+ #
+ # Example: see GEOM_TestOthers.py
+ def RemoveExtraEdges(self,theShape):
+ anObj = self.BlocksOp.RemoveExtraEdges(theShape)
+ if self.BlocksOp.IsDone() == 0:
+ print "RemoveExtraEdges : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Check, if the given shape is a blocks compound.
+ # Fix all detected errors.
+ # \note Single block can be also fixed by this method.
+ # @param theCompound The compound to check and improve.
+ # @return Improved compound.
+ #
+ # Example: see GEOM_TestOthers.py
+ def CheckAndImprove(self,theShape):
+ anObj = self.BlocksOp.CheckAndImprove(theShape)
+ if self.BlocksOp.IsDone() == 0:
+ print "CheckAndImprove : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Get all the blocks, contained in the given compound.
+ # @param theCompound The compound to explode.
+ # @param theMinNbFaces If solid has lower number of faces, it is not a block.
+ # @param theMaxNbFaces If solid has higher number of faces, it is not a block.
+ # \note If theMaxNbFaces = 0, the maximum number of faces is not restricted.
+ # @return List of GEOM_Objects, containing the retrieved blocks.
+ #
+ # Example: see GEOM_TestOthers.py
+ def MakeBlockExplode(self,theCompound, theMinNbFaces, theMaxNbFaces):
+ aList = self.BlocksOp.ExplodeCompoundOfBlocks(theCompound, theMinNbFaces, theMaxNbFaces)
+ if self.BlocksOp.IsDone() == 0:
+ print "MakeBlockExplode : ", self.BlocksOp.GetErrorCode()
+ return aList
+
+ ## Find block, containing the given point inside its volume or on boundary.
+ # @param theCompound Compound, to find block in.
+ # @param thePoint Point, close to the desired block. If the point lays on
+ # boundary between some blocks, we return block with nearest center.
+ # @return New GEOM_Object, containing the found block.
+ #
+ # Example: see GEOM_Spanner.py
+ def GetBlockNearPoint(self,theCompound, thePoint):
+ anObj = self.BlocksOp.GetBlockNearPoint(theCompound, thePoint)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetBlockNearPoint : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Find block, containing all the elements, passed as the parts, or maximum quantity of them.
+ # @param theCompound Compound, to find block in.
+ # @param theParts List of faces and/or edges and/or vertices to be parts of the found block.
+ # @return New GEOM_Object, containing the found block.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetBlockByParts(self,theCompound, theParts):
+ anObj = self.BlocksOp.GetBlockByParts(theCompound, theParts)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetBlockByParts : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Return all blocks, containing all the elements, passed as the parts.
+ # @param theCompound Compound, to find blocks in.
+ # @param theParts List of faces and/or edges and/or vertices to be parts of the found blocks.
+ # @return List of GEOM_Objects, containing the found blocks.
+ #
+ # Example: see GEOM_Spanner.py
+ def GetBlocksByParts(self,theCompound, theParts):
+ aList = self.BlocksOp.GetBlocksByParts(theCompound, theParts)
+ if self.BlocksOp.IsDone() == 0:
+ print "GetBlocksByParts : ", self.BlocksOp.GetErrorCode()
+ return aList
+
+ ## Multi-transformate block and glue the result.
+ # Transformation is defined so, as to superpose direction faces.
+ # @param Block Hexahedral solid to be multi-transformed.
+ # @param DirFace1 ID of First direction face.
+ # @param DirFace2 ID of Second direction face.
+ # @param NbTimes Quantity of transformations to be done.
+ # \note Unique ID of sub-shape can be obtained, using method GetSubShapeID().
+ # @return New GEOM_Object, containing the result shape.
+ #
+ # Example: see GEOM_Spanner.py
+ def MakeMultiTransformation1D(self,Block, DirFace1, DirFace2, NbTimes):
+ anObj = self.BlocksOp.MakeMultiTransformation1D(Block, DirFace1, DirFace2, NbTimes)
+ if self.BlocksOp.IsDone() == 0:
+ print "MakeMultiTransformation1D : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Multi-transformate block and glue the result.
+ # @param Block Hexahedral solid to be multi-transformed.
+ # @param DirFace1U,DirFace2U IDs of Direction faces for the first transformation.
+ # @param DirFace1V,DirFace2V IDs of Direction faces for the second transformation.
+ # @param NbTimesU,NbTimesV Quantity of transformations to be done.
+ # @return New GEOM_Object, containing the result shape.
+ #
+ # Example: see GEOM_Spanner.py
+ def MakeMultiTransformation2D(self,Block, DirFace1U, DirFace2U, NbTimesU,
+ DirFace1V, DirFace2V, NbTimesV):
+ anObj = self.BlocksOp.MakeMultiTransformation2D(Block, DirFace1U, DirFace2U, NbTimesU,
+ DirFace1V, DirFace2V, NbTimesV)
+ if self.BlocksOp.IsDone() == 0:
+ print "MakeMultiTransformation2D : ", self.BlocksOp.GetErrorCode()
+ return anObj
+
+ ## Build all possible propagation groups.
+ # Propagation group is a set of all edges, opposite to one (main)
+ # edge of this group directly or through other opposite edges.
+ # Notion of Opposite Edge make sence only on quadrangle face.
+ # @param theShape Shape to build propagation groups on.
+ # @return List of GEOM_Objects, each of them is a propagation group.
+ #
+ # Example: see GEOM_TestOthers.py
+ def Propagate(self,theShape):
+ listChains = self.BlocksOp.Propagate(theShape)
+ if self.BlocksOp.IsDone() == 0:
+ print "Propagate : ", self.BlocksOp.GetErrorCode()
+ return listChains
+
+ # -----------------------------------------------------------------------------
+ # Group operations
+ # -----------------------------------------------------------------------------
+
+ ## Creates a new group which will store sub shapes of theMainShape
+ # @param theMainShape is a GEOM object on which the group is selected
+ # @param theShapeType defines a shape type of the group
+ # @return a newly created GEOM group
+ #
+ # Example: see GEOM_TestOthers.py
+ def CreateGroup(self,theMainShape, theShapeType):
+ anObj = self.GroupOp.CreateGroup(theMainShape, theShapeType)
+ if self.GroupOp.IsDone() == 0:
+ print "CreateGroup : ", self.GroupOp.GetErrorCode()
+ return anObj
+
+ ## Adds a sub object with ID theSubShapeId to the group
+ # @param theGroup is a GEOM group to which the new sub shape is added
+ # @param theSubShapeID is a sub shape ID in the main object.
+ # \note Use method GetSubShapeID() to get an unique ID of the sub shape
+ #
+ # Example: see GEOM_TestOthers.py
+ def AddObject(self,theGroup, theSubShapeID):
+ self.GroupOp.AddObject(theGroup, theSubShapeID)
+ if self.GroupOp.IsDone() == 0:
+ print "AddObject : ", self.GroupOp.GetErrorCode()
+ pass
+ pass
+
+ ## Removes a sub object with ID \a theSubShapeId from the group
+ # @param theGroup is a GEOM group from which the new sub shape is removed
+ # @param theSubShapeID is a sub shape ID in the main object.
+ # \note Use method GetSubShapeID() to get an unique ID of the sub shape
+ #
+ # Example: see GEOM_TestOthers.py
+ def RemoveObject(self,theGroup, theSubShapeID):
+ self.GroupOp.RemoveObject(theGroup, theSubShapeID)
+ if self.GroupOp.IsDone() == 0:
+ print "RemoveObject : ", self.GroupOp.GetErrorCode()
+ pass
+ pass
+
+ ## Adds to the group all the given shapes. No errors, if some shapes are alredy included.
+ # @param theGroup is a GEOM group to which the new sub shapes are added.
+ # @param theSubShapes is a list of sub shapes to be added.
+ #
+ # Example: see GEOM_TestOthers.py
+ def UnionList (self,theGroup, theSubShapes):
+ self.GroupOp.UnionList(theGroup, theSubShapes)
+ if self.GroupOp.IsDone() == 0:
+ print "UnionList : ", self.GroupOp.GetErrorCode()
+ pass
+ pass
+
+ ## Works like the above method, but argument
+ # theSubShapes here is a list of sub-shapes indices
+ #
+ # Example: see GEOM_TestOthers.py
+ def UnionIDs(self,theGroup, theSubShapes):
+ self.GroupOp.UnionIDs(theGroup, theSubShapes)
+ if self.GroupOp.IsDone() == 0:
+ print "UnionIDs : ", self.GroupOp.GetErrorCode()
+ pass
+ pass
+
+ ## Removes from the group all the given shapes. No errors, if some shapes are not included.
+ # @param theGroup is a GEOM group from which the sub-shapes are removed.
+ # @param theSubShapes is a list of sub-shapes to be removed.
+ #
+ # Example: see GEOM_TestOthers.py
+ def DifferenceList (self,theGroup, theSubShapes):
+ self.GroupOp.DifferenceList(theGroup, theSubShapes)
+ if self.GroupOp.IsDone() == 0:
+ print "DifferenceList : ", self.GroupOp.GetErrorCode()
+ pass
+ pass
+
+ ## Works like the above method, but argument
+ # theSubShapes here is a list of sub-shapes indices
+ #
+ # Example: see GEOM_TestOthers.py
+ def DifferenceIDs(self,theGroup, theSubShapes):
+ self.GroupOp.DifferenceIDs(theGroup, theSubShapes)
+ if self.GroupOp.IsDone() == 0:
+ print "DifferenceIDs : ", self.GroupOp.GetErrorCode()
+ pass
+ pass
+
+ ## Returns a list of sub objects ID stored in the group
+ # @param theGroup is a GEOM group for which a list of IDs is requested
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetObjectIDs(self,theGroup):
+ ListIDs = self.GroupOp.GetObjects(theGroup)
+ if self.GroupOp.IsDone() == 0:
+ print "GetObjectIDs : ", self.GroupOp.GetErrorCode()
+ return ListIDs
+
+ ## Returns a type of sub objects stored in the group
+ # @param theGroup is a GEOM group which type is returned.
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetType(self,theGroup):
+ aType = self.GroupOp.GetType(theGroup)
+ if self.GroupOp.IsDone() == 0:
+ print "GetType : ", self.GroupOp.GetErrorCode()
+ return aType
+
+ ## Returns a main shape associated with the group
+ # @param theGroup is a GEOM group for which a main shape object is requested
+ # @return a GEOM object which is a main shape for theGroup
+ #
+ # Example: see GEOM_TestOthers.py
+ def GetMainShape(self,theGroup):
+ anObj = self.GroupOp.GetMainShape(theGroup)
+ if self.GroupOp.IsDone() == 0:
+ print "GetMainShape : ", self.GroupOp.GetErrorCode()
+ return anObj
+
+ ## Create group of edges of theShape, whose length is in range [min_length, max_length].
+ # If include_min/max == 0, edges with length == min/max_length will not be included in result.
+ def GetEdgesByLength (self,theShape, min_length, max_length, include_min = 1, include_max = 1):
+ edges = self.SubShapeAll(theShape, ShapeType["EDGE"])
+ edges_in_range = []
+ for edge in edges:
+ Props = self.BasicProperties(edge)
+ if min_length <= Props[0] and Props[0] <= max_length:
+ if (not include_min) and (min_length == Props[0]):
+ skip = 1
+ else:
+ if (not include_max) and (Props[0] == max_length):
+ skip = 1
+ else:
+ edges_in_range.append(edge)
+
+ if len(edges_in_range) <= 0:
+ print "No edges found by given criteria"
+ return 0
+
+ group_edges = self.CreateGroup(theShape, ShapeType["EDGE"])
+ self.UnionList(group_edges, edges_in_range)
+
+ return group_edges
+
+ ## Create group of edges of selected shape, whose length is in range [min_length, max_length].
+ # If include_min/max == 0, edges with length == min/max_length will not be included in result.
+ def SelectEdges (self,min_length, max_length, include_min = 1, include_max = 1):
+ nb_selected = sg.SelectedCount()
+ if nb_selected < 1:
+ print "Select a shape before calling this function, please."
+ return 0
+ if nb_selected > 1:
+ print "Only one shape must be selected"
+ return 0
+
+ id_shape = sg.getSelected(0)
+ shape = IDToObject( id_shape )
+
+ group_edges = self.GetEdgesByLength(shape, min_length, max_length, include_min, include_max)
+
+ left_str = " < "
+ right_str = " < "
+ if include_min: left_str = " <= "
+ if include_max: right_str = " <= "
+
+ self.addToStudyInFather(shape, group_edges, "Group of edges with " + `min_length`
+ + left_str + "length" + right_str + `max_length`)
+
+ sg.updateObjBrowser(1)
+
+ return group_edges
+
+ ## Add Path to load python scripts from
+ def addPath(self,Path):
+ if (sys.path.count(Path) < 1):
+ sys.path.append(Path)
+
+import omniORB
+#Register the new proxy for GEOM_Gen
+omniORB.registerObjref(GEOM._objref_GEOM_Gen._NP_RepositoryId, geompyDC)
