--- /dev/null
+
+ADD_CUSTOM_TARGET( HYDROData.py DEPENDS HYDROData.sip COMMAND ../../../HYDRO_SRC/src/HYDROPy/configure.py )
--- /dev/null
+# Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+#
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from PyQt4 import pyqtconfig
+
+# These are installation specific values created when HYDROData was configured.
+# The following line will be replaced when this template is used to create
+# the final configuration module.
+# @SIP_CONFIGURATION@
+
+class Configuration(pyqtconfig.Configuration):
+ """The class that represents HYDROData configuration values.
+ """
+ def __init__(self, sub_cfg=None):
+ """Initialise an instance of the class.
+
+ sub_cfg is the list of sub-class configurations. It should be None
+ when called normally.
+ """
+ # This is all standard code to be copied verbatim except for the
+ # name of the module containing the super-class.
+ if sub_cfg:
+ cfg = sub_cfg
+ else:
+ cfg = []
+
+ cfg.append(_pkg_config)
+
+ pyqtconfig.Configuration.__init__(self, cfg)
+
+class HYDRODataModuleMakefile(pyqtconfig.QtGuiModuleMakefile):
+ """The Makefile class for modules that %Import HYDROData.
+ """
+ def finalise(self):
+ """Finalise the macros.
+ """
+ # Make sure our C++ library is linked.
+ self.extra_libs.append("HYDROData")
+
+ # Let the super-class do what it needs to.
+ pyqtconfig.QtGuiModuleMakefile.finalise(self)
\ No newline at end of file
--- /dev/null
+
+%Copying
+Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+
+Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+%End
+
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+
+
+%Module(name=HYDROData, version=1)
+
+
+%Copying
+Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+
+Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+%End
+
+%Import QtCore/QtCoremod.sip
+
+%Include HYDROData_Object.sip
+%Include HYDROData_Bathymetry.sip
+
+
+%Include HYDROData_Document.sip
+
+
--- /dev/null
+// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+//
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+
+%ExportedHeaderCode
+
+#include <HYDROData_Bathymetry.h>
+
+#include <gp_XYZ.hxx>
+
+%End
+
+%ModuleCode
+
+PyObject* convertToPythonAltitudeList( const HYDROData_Bathymetry::AltitudePoints& thePoints );
+HYDROData_Bathymetry::AltitudePoints convertFromPythonAltitudeList( PyObject* thePythonList );
+
+%End
+
+class HYDROData_Bathymetry : HYDROData_Object
+{
+
+%ConvertToSubClassCode
+ if ( !Handle(HYDROData_Bathymetry)::DownCast( sipCpp ).IsNull() )
+ sipClass = sipClass_HYDROData_Bathymetry;
+ else
+ sipClass = NULL;
+%End
+
+%TypeHeaderCode
+#include <HYDROData_Bathymetry.h>
+%End
+
+%TypeCode
+
+PyObject* convertToPythonAltitudeList( const HYDROData_Bathymetry::AltitudePoints& thePoints )
+{
+ int aListSize = thePoints.size();
+
+ PyObject* aPythonList = NULL;
+ if ( ( aPythonList = PyList_New( aListSize ) ) == NULL )
+ return NULL;
+
+ for ( int i = 0; i < aListSize; ++i )
+ {
+ const HYDROData_Bathymetry::AltitudePoint& aPoint = thePoints.at( i );
+
+ PyObject* aTypleObj = Py_BuildValue( "(ddd)", aPoint.X(), aPoint.Y(), aPoint.Z() );
+
+ PyList_SET_ITEM( aPythonList, i, aTypleObj );
+ }
+
+ return aPythonList;
+}
+
+HYDROData_Bathymetry::AltitudePoints convertFromPythonAltitudeList( PyObject* thePythonList )
+{
+ HYDROData_Bathymetry::AltitudePoints aPoints;
+ if ( thePythonList == NULL )
+ return aPoints;
+
+ for ( int i = 0, n = PyList_GET_SIZE( thePythonList ); i < n; ++i )
+ {
+ PyObject* aTypleObj = PyList_GET_ITEM( thePythonList, i );
+
+ double anArr[ 3 ];
+ if ( !PyArg_ParseTuple( aTypleObj, "ddd", &anArr[ 0 ], &anArr[ 1 ], &anArr[ 2 ] ) )
+ continue;
+
+ HYDROData_Bathymetry::AltitudePoint aPoint;
+ aPoint.SetX( anArr[ 0 ] );
+ aPoint.SetY( anArr[ 1 ] );
+ aPoint.SetZ( anArr[ 2 ] );
+
+ aPoints.append( aPoint );
+ }
+
+ return aPoints;
+}
+
+%End
+
+
+public:
+
+ //virtual const ObjectKind GetKind() const { return KIND_BATHYMETRY; }
+
+
+public:
+ // Public methods to work with Bathymetry altitudes.
+
+ /**
+ * Returns altitude points list.
+ * \return points list
+ */
+ static double GetInvalidAltitude();
+
+ /**
+ * Replace current altitude points by new one.
+ * \param thePoints the altitude points list
+ */
+ virtual void SetAltitudePoints( SIP_PYLIST ) [void (const HYDROData_Bathymetry::AltitudePoints&)] ;
+ %MethodCode
+
+ // The C++ API takes a list of gp_XYZ objects,
+ // but we pass a list of python tuples.
+
+ HYDROData_Bathymetry::AltitudePoints aPoints =
+ convertFromPythonAltitudeList( a0 );
+
+ Py_BEGIN_ALLOW_THREADS
+ sipSelfWasArg ? sipCpp->HYDROData_Bathymetry::SetAltitudePoints( aPoints ) :
+ sipCpp->SetAltitudePoints( aPoints );
+ Py_END_ALLOW_THREADS
+
+ %End
+ %VirtualCatcherCode
+
+ PyObject* aPythonList = convertToPythonAltitudeList( a0 );
+ if ( aPythonList != NULL )
+ {
+ sipCallMethod( &sipIsErr, sipMethod, "O", aPythonList );
+ Py_DECREF( aPythonList );
+ }
+
+ %End
+
+ /**
+ * Returns altitude points list.
+ * \return points list
+ */
+ SIP_PYLIST GetAltitudePoints() const [HYDROData_Bathymetry::AltitudePoints ()] ;
+ %MethodCode
+
+ // The C++ API returns a list of gp_XYZ objects,
+ // we convert it to list of python tuples.
+
+ HYDROData_Bathymetry::AltitudePoints aPoints;
+
+ Py_BEGIN_ALLOW_THREADS
+ aPoints = sipSelfWasArg ? sipCpp->HYDROData_Bathymetry::GetAltitudePoints() : sipCpp->GetAltitudePoints();
+ Py_END_ALLOW_THREADS
+
+ sipRes = convertToPythonAltitudeList( aPoints );
+
+ %End
+ /**
+ * Remove all altitude points.
+ */
+ void RemoveAltitudePoints();
+
+ /**
+ * Returns altitude for given point.
+ * \param thePoint the point to examine
+ * \return altitude value
+ */
+ double GetAltitudeForPoint( const QPointF& thePoint ) const;
+
+
+public:
+ // Public methods to work with files.
+
+ /**
+ * Imports Bathymetry data from file. The supported file types:
+ * - xyz
+ * \param theFileName the path to file
+ * \return \c true if file has been successfully read
+ */
+ bool ImportFromFile( const QString& theFileName );
+
+
+protected:
+
+ //friend class HYDROData_Iterator;
+
+ /**
+ * Creates new object in the internal data structure. Use higher level objects
+ * to create objects with real content.
+ */
+ HYDROData_Bathymetry();
+
+ /**
+ * Destructs properties of the object and object itself, removes it from the document.
+ */
+ ~HYDROData_Bathymetry();
+};
+
+
--- /dev/null
+// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+//
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+
+%ExportedHeaderCode
+#include <HYDROData_Document.h>
+%End
+
+enum Data_DocError {
+ DocError_OK = 0, ///< success
+ DocError_ResourcesProblem, ///< resources files are invalid or not found
+ DocError_CanNotOpen, ///< can not open file for reading or writing
+ DocError_InvalidVersion, ///< version of document is different than expected
+ DocError_InvalidFormat, ///< format of the document is bad
+ DocError_UnknownProblem ///< problem has unknown nature
+};
+
+class HYDROData_Document
+{
+%TypeHeaderCode
+#include <HYDROData_Document.h>
+%End
+
+%ConvertToSubClassCode
+ if ( !Handle(HYDROData_Document)::DownCast( sipCpp ).IsNull() )
+ sipClass = sipClass_HYDROData_Document;
+ else
+ sipClass = NULL;
+%End
+
+public:
+
+ //! Returns the existing document or creates new if it is not exist
+ static HYDROData_Document Document( const int theStudyID ) [Handle_HYDROData_Document (const int)] ;
+ %MethodCode
+
+ Py_BEGIN_ALLOW_THREADS
+ Handle(HYDROData_Document) aDocument = HYDROData_Document::Document( a0 );
+ if ( !aDocument.IsNull() )
+ {
+ sipRes = aDocument.operator->();
+ }
+
+ Py_END_ALLOW_THREADS
+
+ %End
+
+ //! Returns true if data model contains document for this study
+ static bool HasDocument( const int theStudyID );
+
+ //! Loads the OCAF document from the file.
+ //! \param theFileName full name of the file to load
+ //! \param theStudyID identifier of the SALOME study to associate with loaded file
+ //! \returns error status (OK in case of success)
+ static Data_DocError Load( const char* theFileName, const int theStudyID );
+
+ //! Saves the OCAF document to the file.
+ //! \param theFileName full name of the file to store
+ //! \returns error status (OK in case of success)
+ Data_DocError Save( const char* theFileName );
+
+ //! Removes document data
+ void Close();
+
+ //! Starts a new operation (opens a tansaction)
+ void StartOperation();
+
+ //! Finishes the previously started operation (closes the transaction)
+ //void CommitOperation(
+ // const TCollection_ExtendedString& theName = TCollection_ExtendedString() );
+
+ //! Aborts the operation
+ void AbortOperation();
+
+ //! Returns true if operation has been started, but not yet finished or aborted
+ bool IsOperation();
+
+ //! Returns true if document was modified (since creation/opening)
+ bool IsModified();
+
+ //! Returns True if there are available Undos
+ bool CanUndo();
+
+ //! Returns a list of stored undo actions
+ //const TDF_DeltaList& GetUndos();
+
+ //! Clears a list of stored undo actions
+ void ClearUndos();
+
+ //! Undoes last operation
+ void Undo();
+
+ //! Returns True if there are available Redos
+ bool CanRedo();
+
+ //! Returns a list of stored undo actions
+ //const TDF_DeltaList& GetRedos();
+
+ //! Clears a list of stored undo actions
+ void ClearRedos();
+
+ //! Redoes last operation
+ void Redo();
+
+ //! Creates and locates in the document a new object
+ //! \param theKind kind of the created object, can not be UNKNOWN
+ //! \returns the created object
+ HYDROData_Object CreateObject( const ObjectKind theKind ) [Handle_HYDROData_Object (const ObjectKind)] ;
+ %MethodCode
+
+ Py_BEGIN_ALLOW_THREADS
+
+ Handle(HYDROData_Object) anObject =
+ sipSelfWasArg ? sipCpp->HYDROData_Document::CreateObject( a0 ) : sipCpp->CreateObject( a0 );
+ if ( !anObject.IsNull() )
+ {
+ switch( anObject->GetKind() )
+ {
+ case KIND_BATHYMETRY:
+ {
+ Handle(HYDROData_Bathymetry) aBathymetry =
+ Handle(HYDROData_Bathymetry)::DownCast( anObject );
+ sipRes = new HYDROData_Bathymetry( *aBathymetry.operator->() );
+ break;
+ }
+ }
+ }
+
+ Py_END_ALLOW_THREADS
+
+ %End
+
+protected:
+
+ //friend class HYDROData_Iterator;
+ //friend class test_HYDROData_Document;
+
+ //! Creates new document: private because "Document" method must be used instead of direct creation.
+ HYDROData_Document();
+
+ //! Deletes all high-level data, managed this document
+ ~HYDROData_Document();
+
+};
--- /dev/null
+// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+//
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+
+
+%ExportedHeaderCode
+#include <HYDROData_Object.h>
+%End
+
+typedef int ObjectKind;
+
+class HYDROData_Object
+{
+%TypeHeaderCode
+#include <HYDROData_Object.h>
+%End
+
+%ConvertToSubClassCode
+ // HYDROData_Object sub-classes provide a unique kind ID.
+ switch ( sipCpp->GetKind() )
+ {
+ case KIND_BATHYMETRY:
+ sipClass = sipClass_HYDROData_Bathymetry;
+ break;
+
+ case KIND_UNKNOWN:
+ sipClass = sipClass_HYDROData_Object;
+ break;
+
+ default:
+ // We don't recognise the type.
+ sipClass = NULL;
+ }
+%End
+
+public:
+ /**
+ * Visual state data.
+ */
+ struct VisualState
+ {
+ bool Visibility;
+ double Transparency;
+ double ZValue;
+
+ VisualState();
+ };
+
+ typedef QMap < int, HYDROData_Object::VisualState > ViewId2VisualStateMap;
+ typedef QMapIterator< int, HYDROData_Object::VisualState > ViewId2VisualStateMapIterator;
+
+public:
+
+ /**
+ * Returns the kind of this object. Must be redefined in all objects of known type.
+ */
+ //virtual const ObjectKind GetKind() const {return KIND_UNKNOWN;}
+
+ /**
+ * Returns the name of this object.
+ */
+ QString GetName() const;
+
+ /**
+ * Updates the name of this object.
+ */
+ void SetName(const QString& theName);
+
+ /**
+ * Returns the object visibility state for the view with specified id.
+ * \param theViewId view id
+ * \returns visibility state
+ */
+ bool IsVisible( const int theViewId ) const;
+
+ /**
+ * Sets the object visibility state for the view with specified id.
+ * \param theViewId view id
+ * \param theVal visibility state
+ */
+ void SetVisible( const int theViewId,
+ const bool theVal );
+
+ /**
+ * Checks is object exists in the data structure.
+ * \returns true is object is not exists in the data model
+ */
+ bool IsRemoved() const;
+
+ /**
+ * Removes object from the data structure.
+ */
+ void Remove();
+
+ /**
+ * Returns unique integer identifier of the object (may be used for ordering of objects)
+ */
+ int ID() const;
+
+ /**
+ * Copies all properties of this to the destinated object.
+ * Objects must be the same type.
+ * \param theDestination initialized object (from any document) - target of copying
+ */
+ /*
+ void CopyTo( HYDROData_Object theDestination ) const;
+ */
+
+protected:
+
+ //friend class HYDROData_Iterator;
+
+ /**
+ * Creates new object in the internal data structure. Use higher level objects
+ * to create objects with real content.
+ */
+ HYDROData_Object();
+
+ /**
+ * Destructs properties of the object and object itself, removes it from the document.
+ */
+ virtual ~HYDROData_Object();
+
+};
--- /dev/null
+# Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+#
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+import os
+import sipconfig
+from PyQt4 import pyqtconfig
+
+# Get the PyQt configuration information.
+config = pyqtconfig.Configuration()
+
+src_path = '.'
+installs_path = '.'
+
+# Set enviroment for make file
+
+if 'HYDRO_SRC_DIR' in os.environ :
+ config._macros[ 'INCDIR' ] += ' ' + os.path.join( os.environ[ 'HYDRO_SRC_DIR' ], 'src/HYDROData' )
+ src_path = os.path.join( os.environ[ 'HYDRO_SRC_DIR' ], 'src/HYDROPy' )
+
+if 'CASROOT' in os.environ :
+ config._macros[ 'INCDIR' ] += ' ' + os.path.join( os.environ[ 'CASROOT' ], 'inc' )
+
+if 'HYDRO_ROOT_DIR' in os.environ :
+ config._macros[ 'LIBDIR' ] += ' ' + os.path.join( os.environ[ 'HYDRO_ROOT_DIR' ], 'lib/salome' )
+ installs_path = os.path.join( os.environ[ 'HYDRO_ROOT_DIR' ], 'lib/python' + os.environ[ 'PYTHON_VERSION' ] + '/site-packages/salome' )
+
+config._macros[ 'DEFINES' ] += ' HAVE_CONFIG_H HAVE_LIMITS_H HAVE_WOK_CONFIG_H OCC_CONVERT_SIGNALS'
+
+# The name of the SIP build file generated by SIP and used by the build
+# system.
+build_file = "HYDROData.sbf"
+
+# Get the extra SIP flags needed by the imported PyQt modules. Note that
+# this normally only includes those flags (-x and -t) that relate to SIP's
+# versioning system.
+pyqt_sip_flags = config.pyqt_sip_flags
+
+# Run SIP to generate the code. Note that we tell SIP where to find the qt
+# module's specification files using the -I flag.
+os.system( " ".join([
+ config.sip_bin,
+ '-s', '.cxx',
+ '-c', ".",
+ '-b', build_file,
+ '-I', config.pyqt_sip_dir,
+ pyqt_sip_flags,
+ os.path.join( src_path, 'HYDROData.sip' )
+ ]))
+
+
+# We are going to install the SIP specification file for this module and
+# its configuration module.
+installs = []
+installs.append( [ 'HYDROData.py', installs_path ] )
+
+# Create the Makefile. The QtGuiModuleMakefile class provided by the
+# pyqtconfig module takes care of all the extra preprocessor, compiler and
+# linker flags needed by the Qt library.
+makefile = pyqtconfig.QtGuiModuleMakefile(
+ configuration=config,
+ build_file=build_file,
+ install_dir=installs_path,
+ installs=installs,
+ makefile='Makefile'
+)
+
+# Add the library we are wrapping. The name doesn't include any platform
+# specific prefixes or extensions (e.g. the "lib" prefix on UNIX, or the
+# ".dll" extension on Windows).
+makefile.extra_libs = [ 'HYDROData' ]
+
+# Generate the Makefile itself.
+makefile.generate()
+
+# Now we create the configuration module. This is done by merging a Python
+# dictionary (whose values are normally determined dynamically) with a
+# (static) template.
+content = {
+ # Publish where the SIP specifications for this module will be
+ # installed.
+ 'HYDROData_sip_dir': installs_path,
+
+ # Publish the set of SIP flags needed by this module. As these are the
+ # same flags needed by the qt module we could leave it out, but this
+ # allows us to change the flags at a later date without breaking
+ # scripts that import the configuration module.
+ 'HYDROData_sip_flags': pyqt_sip_flags
+}
+
+# This creates the HYDROData.py module from the HYDROData.py.in
+# template and the dictionary.
+sipconfig.create_config_module( 'HYDROData.py', os.path.join( src_path, 'HYDROData.py.in' ), content )
\ No newline at end of file
