+++ /dev/null
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
-//
-//
-//
-// File : MPIContainer.idl
-
-#ifndef _SALOME_MPICONTAINER_IDL_
-#define _SALOME_MPICONTAINER_IDL_
-
-#include "SALOME_Component.idl"
-#include "MPIObject.idl"
-
-module Engines
-{
- interface MPIContainer:Container,MPIObject
- {
- } ;
-} ;
-
-#endif
-
+++ /dev/null
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
-//
-//
-//
-// File : MPIObject.idl
-
-#ifndef _SALOME_MPIOBJECT_IDL_
-#define _SALOME_MPIOBJECT_IDL_
-
-module Engines
-{
- typedef sequence<Object> IORTab;
- interface MPIObject
- {
- attribute IORTab tior;
- } ;
-} ;
-
-#endif
+++ /dev/null
-# Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
-#
-#
-#
-# File : Help.py
-# Author : Paul RASCLE, EDF
-# Module : SALOME
-# $Header$
-
-class SalomeDoc:
- def __init__(self, aDoc):
- self.doc = aDoc
- def __repr__(self):
- print self.doc
- return "---"
- def salome(self):
- doc_salome = '''
-MODULE : salome
----------------
-module salome gives access to Salome ressources:
-variables:
-
- salome:orb : CORBA
- salome.naming_service : instance of naming Service class
- methods:
- Resolve(name) : find a CORBA object (ior) by its pathname
- Register(name) : register a CORBA object under a pathname
- salome.lcc : instance of lifeCycleCORBA class
- methods:
- FindOrLoadComponent(server,name) :
- obtain an Engine (CORBA object)
- or launch the Engine if not found,
- with a Server name and an Engine name
- salome.sg
- methods:
- updateObjBrowser(bool):
- getActiveStudyId():
- getActiveStudyName():
-
- SelectedCount(): returns number of selected objects
- getSelected(i): returns entry of selected object number i
- getAllSelected(): returns list of entry of selected objects
- AddIObject(Entry): select an existing Interactive object
- RemoveIObject(Entry): remove object from selection
- ClearIObjects(): clear selection
-
- Display(*Entry):
- DisplayOnly(Entry):
- Erase(Entry):
- DisplayAll():
- EraseAll():
-
- IDToObject(Entry): returns CORBA reference from entry
-
- salome.myStudyName : active Study Name
- salome.myStudyId : active Study Id
- salome.myStudy : the active Study itself (CORBA ior)
- methods : defined in SALOMEDS.idl
-
-methods:
- salome.DumpStudy(study) : Dump a study, given the ior
----
-'''
- print doc_salome
-
- def geompy(self):
- doc_geompy = '''
-MODULE : geompy
----------------
-module geompy provides an encapsulation of GEOM Engine methods
-variables:
- geompy.geom : a Geometry Engine, found or loaded
- at first import of module geompy.
- methods : defined in GEOM_Gen.idl
- geompy.myBuilder : a study builder
- geompy.father : GEOM root in current study (salome.myStudy)
-
-methods:
- addToStudy(aShape, aName) : add the shape into the current study
- --- all methods of GEOM_Gen.idl that returns a shape are encapsulated,
- with the same interface : shapes are named with their ior
-'''
- print doc_geompy
-
- def supervision(self):
- doc_supervision = '''
-MODULES : SALOME_SuperVisionEditor and SALOME_SuperVisionExecutor
------------------------------------------------------------------
-this modules provide access to Editor and Executor Engine methods
-
-See SUPERV.idl
-
-In order to run the example (supervisionexample.py)
-
- Type : from supervisionexample import *
- supervisionexample.py contains comments
-
-A new python example avoids references to LifeCycleCORBA
- avoids references to NamingService
- avoids references to ModuleCatalog
- avoids SuperVisionComponent creation
- allows G.Input(...) instead of AddInput(G,...)
- replaces Editor/Executor with Graph
- allows Nodes, Ports and Links CORBA objects
- shortens methods names
- ...
-
- See /SuperVisionTest/resources/GraphExample.py
- and GraphExample.xml
----
-'''
- print doc_supervision
-
-
-
-help = SalomeDoc('''
-Availables modules:
- salome : gives access to Salome ressources
- geompy : encapsulation of GEOM Engine methods
- supervision : gives access to SuperVision Engine
-To obtain specific help on a module "truc", type: help.truc()
-To run an example, type: import example3
-''')
-
+++ /dev/null
-# Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
-#
-#
-#
-# File : PyInterp.py
-# Author : Paul RASCLE, EDF
-# Module : SALOME
-# $Header$
-
-import sys
-from omniORB import CORBA
-from LifeCycleCORBA import *
-from libSALOME_Swig import *
-import SALOMEDS
-from SALOME_NamingServicePy import *
-
- #--------------------------------------------------------------------------
-
-def DumpComponent(Study, SO, offset):
- it = Study.NewChildIterator(SO)
- Builder = Study.NewBuilder()
- while it.More():
- CSO = it.Value()
- it.Next()
- anAttr = Builder.FindOrCreateAttribute(CSO, "AttributeName")
- AtName = anAttr._narrow(SALOMEDS.AttributeName)
- t_name = AtName.Value()
- if t_name[0] == 1:
- ofs = 1
- a = ""
- while ofs <= offset:
- a = a + "--"
- ofs = ofs +1
- print a + ">" + CSO.GetID() + " " + t_name[1]
- t_RefSO = CSO.ReferencedObject()
- if t_RefSO[0] == 1:
- RefSO = t_RefSO[1]
- ofs = 1
- a = ""
- while ofs <= offset:
- a = a + " "
- ofs = ofs +1
- print a + ">" + RefSO.GetID()
- DumpComponent(Study, CSO, offset+2)
-
- #--------------------------------------------------------------------------
-
-def DumpStudy(Study):
- itcomp = Study.NewComponentIterator()
- while itcomp.More():
- SC = itcomp.Value()
- itcomp.Next()
- name = SC.ComponentDataType()
- print "-> ComponentDataType is " + name
- DumpComponent(Study, SC, 1)
-
-
- #--------------------------------------------------------------------------
-
-# initialise the ORB
-orb = CORBA.ORB_init([''], CORBA.ORB_ID)
-
-# create an LifeCycleCORBA instance
-lcc = LifeCycleCORBA(orb)
-
-# create an SALOMEGUI_Swig instance
-sg = SALOMEGUI_Swig()
-
-#create an naming service instance
-naming_service = SALOME_NamingServicePy_i(orb)
-
-# get active study name and id
-myStudyName = sg.getActiveStudyName()
-print myStudyName
-
-myStudyId = sg.getActiveStudyId()
-print myStudyId
-
-# get Study Manager reference
-obj = naming_service.Resolve('myStudyManager')
-myStudyManager = obj._narrow(SALOMEDS.StudyManager)
-
-# get active study
-myStudy = myStudyManager.GetStudyByName(myStudyName)
-
+++ /dev/null
-# Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
-#
-#
-#
-# File : examplevtk1.py
-# Module : SALOME
-
-import libSalomePy
-ren=libSalomePy.renderer
-#iren=libSalomePy.interactor
-
-from libVTKCommonPython import *
-from libVTKGraphicsPython import *
-cone = vtkConeSource()
-cone.SetResolution(8)
-coneMapper = vtkPolyDataMapper()
-coneMapper.SetInput(cone.GetOutput())
-coneActor = vtkActor()
-coneActor.SetMapper(coneMapper)
-
-ren.AddActor(coneActor)
-iren = vtkRenderWindowInteractor()
-
+++ /dev/null
-"""
-This module replaces the standard import mechanism with one
-that filters some imports that can't be done more than once.
-
-This is related to the multi study feature that is implemented
-by using the Python multi interpreter feature.
-Some modules register objects or classes by calling modules
-implemented in C. These operations can't be done multiple times.
-So it's very important to control these imports.
-
-Examples:
- - PyQt : import qt calls a C module to register classes
- - OmniORB : import *_idl calls a C module to register CORBA interfaces
-
-Usage:
- - First import the module : import import_hook. This module will
- replace the original importer mechanism
-
- - Next register the module names or pattern names to filter out::
- import_hook.register_name("a")
- import_hook.register_pattern(pattern)
-
- where pattern is a function with one parameter, the module name
- to be imported, that returns true or false depending if this module is
- to be filtered or not.
-
- - Then it's done
-
-IMPORTANT : Every subinterpretor has its own import_hook module. import_hook is not shared among subinterpretors.
-The mechanism only works if shared_imported and pattern are shared between all subinterpretors.
-This is done by calling init_shared_modules().
-
-"""
-import sys, imp, __builtin__
-
-# Keep in shared_imported a copy of dictionnary modules
-# that need to be imported only once in multi-study context
-shared_imported={}
-
-# patterns contains functions that returns 1 or 0 depending if
-# the module name (argument) must be filtered out or not
-# These functions are added by calling register_pattern
-patterns=[]
-
-original_import=__builtin__.__import__
-
-def register_name(name):
- if shared_imported.has_key(name):return
- shared_imported[name]=None
-
-def register_pattern(pattern):
- patterns.append(pattern)
-
-def is_shared(name):
- if shared_imported.has_key(name):return 1
- for pattern in patterns:
- if pattern(name) : return 1
- return 0
-
-def get_shared_imported(name):
- return shared_imported.get(name)
-def set_shared_imported(name,module):
- shared_imported[name]=module
- #print "Module %s shared registered" % name
-
-def get_shared_imported_with_copy(name):
- module_dict= shared_imported.get(name)
- m=imp.new_module(name)
- m.__dict__.update(module_dict)
- return m
-def set_shared_imported_with_copy(name,module):
- shared_imported[name]=module.__dict__.copy()
- #print "Module %s shared registered" % name
-
-def import_hook(name, globals=None, locals=None, fromlist=None):
- module=get_shared_imported(name)
- if module:
- sys.modules[name]=module
- return module
-
- module= original_import(name, globals, locals, fromlist)
-
- if is_shared(name):
- set_shared_imported(name,module)
- return module
-
-original_reload=__builtin__.reload
-
-def reload_hook(module):
- if is_shared(module.__name__):
- return module
- return original_reload(module)
-
-__builtin__.__import__=import_hook
-# Reload is not replaced
-#__builtin__.reload=reload_hook
-
-def init_shared_modules(shared_module):
- global shared_imported, patterns
- shared_imported=shared_module.shared_imported
- patterns= shared_module.patterns
- shared_imported["salome_shared_modules"]=shared_module
- import salome_shared_modules
- for m in salome_shared_modules.list_modules:
- m.init_shared_modules()
-
+++ /dev/null
-"""
-
-"""
-import glob,os,sys
-
-import import_hook
-from import_hook import register_name
-from import_hook import register_pattern
-
-register_name("qt")
-register_pattern(lambda(x):x.endswith("_idl"))
-
-register_name("omniORB")
-register_name("CosNaming")
-
-register_name("Engines")
-register_name("SALOME")
-register_name("SALOMEDS")
-register_name("SALOME_ModuleCatalog")
-
-# BE CAREFUL
-# Engines, SALOME, SALOMEDS must be imported in that order because :
-# Engines imports SALOME_Component_idl
-# SALOME imports SALOME_Session_idl and SALOME_Exception_idl which imports SALOME_Component_idl
-# and SALOMEDS imports SALOMEDS_idl and SALOMEDS_Attributes_idl which imports SALOME_Exception_idl
-# If SALOME is imported before Engines, that module would not be completely imported
-import Engines
-import SALOME
-import SALOMEDS
-
-import SALOME_ModuleCatalog
-from SALOME_utilities import MESSAGE
-#
-# We search all Python CORBA (omniorb) modules.
-# A Python CORBA module has 2 associated Python packages
-# These packages are named : <module_name> and <module_name>__POA
-#
-# Get the SALOMEPATH if set or else use KERNEL_ROOT_DIR that should be set.
-salome_path=os.environ.get("SALOMEPATH",os.getenv("KERNEL_ROOT_DIR"))
-
-# Register all CORBA modules in the path and python modules in shared_modules
-path=salome_path.split(":")
-#
-for rep in path:
- rep_salome=os.path.join(rep,"lib","python"+sys.version[:3],"site-packages","salome")
- # Find all the *__POA packages in the path
- for elem in glob.glob(os.path.join(rep_salome,"*__POA")):
- if os.path.isdir(elem):
- # Found a directory (Python package) named *__POA
- module__POA=os.path.basename(elem)
- module=module__POA[:-5]
- MESSAGE( "Register CORBA module: " + module + ". Directory: " + os.path.abspath(elem)[:-5] )
- register_name(module)
-
- # Now we import modules found in shared_modules directory
- for elem in glob.glob(os.path.join(rep_salome,"shared_modules","*.py")):
- module=os.path.basename(elem)[:-3]
- MESSAGE( "Register Python module: " + module + ". Location: " + os.path.abspath(elem) )
- register_name(module)
-
-def init_shared_modules():
- """
- This function initializes shared modules that need to be
- """
- # EDF-CCAR:
- # Problem with omniORB : omniORB creates a C Python module named _omnipy
- # this module has sub-modules : omni_func, ...
- # _omnipy is quite a package but import with Python sub-interpreters does not seem to work
- # To make it work we need to add those sub-modules in sys.modules
- import sys
- import _omnipy
- sys.modules["_omnipy.omni_func"]=_omnipy.omni_func
- sys.modules["_omnipy.poa_func"]=_omnipy.poa_func
- sys.modules["_omnipy.poamanager_func"]=_omnipy.poamanager_func
- sys.modules["_omnipy.orb_func"]=_omnipy.orb_func
-
+++ /dev/null
-# Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
-#
-#
-#
-# File : salome.py
-# Author : Paul RASCLE, EDF
-# Module : SALOME
-# $Header$
-
-from omniORB import CORBA
-from LifeCycleCORBA import *
-from libSALOME_Swig import *
-import SALOMEDS
-from SALOME_NamingServicePy import *
-
-from SALOME_utilities import *
-
-#--------------------------------------------------------------------------
-
-def DumpComponent(Study, SO, offset):
- it = Study.NewChildIterator(SO)
- Builder = Study.NewBuilder()
- while it.More():
- CSO = it.Value()
- it.Next()
- anAttr = Builder.FindOrCreateAttribute(CSO, "AttributeName")
- AtName = anAttr._narrow(SALOMEDS.AttributeName)
- t_name = AtName.Value()
- if t_name[0] == 1:
- ofs = 1
- a = ""
- while ofs <= offset:
- a = a + "--"
- ofs = ofs +1
- MESSAGE( a + ">" + str(CSO.GetID()) + " " + str(t_name[1]) )
- t_RefSO = CSO.ReferencedObject()
- if t_RefSO[0] == 1:
- RefSO = t_RefSO[1]
- ofs = 1
- a = ""
- while ofs <= offset:
- a = a + " "
- ofs = ofs +1
- MESSAGE( a + ">" + str(RefSO.GetID()) )
- DumpComponent(Study, CSO, offset+2)
-
- #--------------------------------------------------------------------------
-
-def DumpStudy(Study):
- itcomp = Study.NewComponentIterator()
- while itcomp.More():
- SC = itcomp.Value()
- itcomp.Next()
- name = SC.ComponentDataType()
- MESSAGE( "-> ComponentDataType is " + name )
- DumpComponent(Study, SC, 1)
-
-
- #--------------------------------------------------------------------------
-
-def ImportComponentGUI(ComponentName):
- libName = "lib" + ComponentName + "_Swig"
- command = "from " + libName + " import *"
- exec ( command )
- constructor = ComponentName + "_Swig()"
- command = "gui = " + constructor
- exec ( command )
- return gui
-
- #--------------------------------------------------------------------------
-
-def SalomeGUIgetAllSelected(self):
- selNumber = self.SelectedCount()
- listSelected = []
- for i in range(selNumber):
- listSelected.append(self.getSelected(i))
- return listSelected
-
-class SalomeGUI(SALOMEGUI_Swig):
- getAllSelected = SalomeGUIgetAllSelected
-
- #--------------------------------------------------------------------------
-
-def IDToObject(id):
- myObj = None
- mySO = myStudy.FindObjectID(id);
- if mySO is not None:
- ok, anAttr = mySO.FindAttribute("AttributeIOR")
- if ok:
- AtIOR = anAttr._narrow(SALOMEDS.AttributeIOR)
- if AtIOR.Value() != "":
- myObj = orb.string_to_object(AtIOR.Value())
- return myObj
-
-def ObjectToSObject(obj):
- mySO = None
- if obj is not None:
- ior = orb.object_to_string(obj)
- if ior != "":
- mySO = myStudy.FindObjectIOR(ior)
- return mySO
-
-def ObjectToID(obj):
- mySO = ObjectToSObject(obj)
- if mySO:
- return mySO.GetID()
- return ""
-
-def IDToSObject(id):
- mySO = myStudy.FindObjectID(id);
- return mySO
-
- #--------------------------------------------------------------------------
-
-# initialise the ORB
-orb = CORBA.ORB_init([''], CORBA.ORB_ID)
-
-# create an LifeCycleCORBA instance
-lcc = LifeCycleCORBA(orb)
-
-# create an SALOMEGUI_Swig instance
-sg = SalomeGUI()
-
-#create an naming service instance
-naming_service = SALOME_NamingServicePy_i(orb)
-
-# get active study name and id
-myStudyName = sg.getActiveStudyName()
-MESSAGE( myStudyName )
-
-myStudyId = sg.getActiveStudyId()
-MESSAGE( str(myStudyId) )
-
-# get Study Manager reference
-obj = naming_service.Resolve('myStudyManager')
-myStudyManager = obj._narrow(SALOMEDS.StudyManager)
-
-# get active study
-myStudy = myStudyManager.GetStudyByName(myStudyName)
-
+++ /dev/null
-# Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
-#
-#
-#
-# File : salome_shared_modules.py
-# Module : SALOME
-
-from SALOME_utilities import *
-
-"""
-This module with help of import_hook and *_shared_modules
-filters imports when using the embedded Python interpretor.
-
-Some imports can't be done more than once.
-This is related to the multi study feature that is implemented
-by using the Python multi interpreter feature.
-Some modules register objects or classes by calling modules
-implemented in C. These operations can't be done multiple times.
-So it's very important to control these imports.
-
-Examples:
- - PyQt : import qt calls a C module to register classes
- - OmniORB : import *_idl calls a C module to register CORBA interfaces
-
-Usage:
- - First : the module salome_shared_modules is imported by main Python interpretor.
- It will keep a dictionnary and a list that are shared among all
- the subinterpretors and imports import_hook module that replaces
- the standard import mechanism par one that prevents more than one import
- for some modules identified by name (call register_name) or by a
- validator (call register_pattern).
-
- Calls to register_name and register_pattern are done in modules named *_shared_modules
- that could be found in the path SALOMEPATH
-
-"""
-import glob,os,sys
-
-import import_hook
-# shared_imported, patterns, register_name, register_pattern
-# will be shared by all Python sub interpretors
-from import_hook import shared_imported
-from import_hook import patterns
-from import_hook import register_name
-from import_hook import register_pattern
-
-register_name("salome_shared_modules")
-
-# Get the SALOMEPATH if set or else use KERNEL_ROOT_DIR that should be set.
-salome_path=os.environ.get("SALOMEPATH",os.getenv("KERNEL_ROOT_DIR"))
-
-list_modules=[]
-
-# Import all *_shared_modules in the path and store them in list_modules
-path=salome_path.split(":")
-for rep in path:
- # Import all *_shared_modules in rep
- for f in glob.glob(os.path.join(rep,"lib","python"+sys.version[:3],"site-packages","salome","shared_modules","*_shared_modules.py")):
- try:
- m=__import__(os.path.splitext(os.path.basename(f))[0])
- list_modules.append(m)
- except:
- pass
-
-#
-# If shared modules have been imported before installing import mechanism
-# we add them to shared_imported
-#
-for name,module in sys.modules.items():
- if import_hook.is_shared(name) and shared_imported.get(name) is None:
- #print "Module shared added to shared_imported: ",name
- shared_imported[name]=module
-
+++ /dev/null
-# SALOME SALOME_SWIG : binding of C++ implementation and Python
-#
-# Copyright (C) 2003 CEA/DEN, EDF R&D
-#
-#
-#
-# File : salome_test.py
-# Module : SALOME
-
-print "Test the application loading GEOM, SMESH, VISU, MED, components and doing some"
-print "operation within the components."
-
-import salome
-from salome import sg
-import SALOMEDS
-import os
-
-import SALOME_ModuleCatalog
-
-print "======================================================================"
-print " Get Catalog "
-print "======================================================================"
-obj = salome.naming_service.Resolve('Kernel/ModulCatalog')
-catalog = obj._narrow(SALOME_ModuleCatalog.ModuleCatalog)
-
-print "======================================================================"
-print " Create Study "
-print "======================================================================"
-
-comp = catalog.GetComponent("GEOM")
-if comp is None:
- raise RuntimeError,"Component GEOM not found in Module Catalog."
-
-import geompy
-
-print "================================="
-print " create AttributeReal "
-print "================================="
-A = geompy.myBuilder.FindOrCreateAttribute(geompy.father, "AttributeReal")
-if A == None :
- raise RuntimeError, "Can't create AttributeReal attribute"
-A = A._narrow(SALOMEDS.AttributeReal)
-A.SetValue(0.0001)
-if A.Value() != 0.0001:
- raise RuntimeError, "Error : wrong value of AttributeReal"
-
-print
-print " =========== Test Geometry =========================="
-print
-
-print "==================================="
-print " define a box"
-print "==================================="
-
-box = geompy.MakeBox(0., 0., 0., 100., 200., 300.)
-idbox = geompy.addToStudy(box,"box")
-
-print
-print "============= Test SMESH ============================="
-print
-
-import StdMeshers
-
-comp = catalog.GetComponent("SMESH")
-if comp is None:
- raise RuntimeError,"Component SMESH not found in Module Catalog."
-
-comp = catalog.GetComponent("MED")
-if comp is None:
- raise RuntimeError,"Component MED not found in Module Catalog."
-
-import SMESH
-
-geom = salome.lcc.FindOrLoadComponent("FactoryServer", "GEOM")
-myBuilder = salome.myStudy.NewBuilder()
-
-smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
-smeshgui = salome.ImportComponentGUI("SMESH")
-smeshgui.Init(salome.myStudyId);
-
-ShapeTypeCompSolid = 1
-ShapeTypeSolid = 2
-ShapeTypeShell = 3
-ShapeTypeFace = 4
-ShapeTypeWire = 5
-ShapeTypeEdge = 6
-ShapeTypeVertex = 7
-
-# ---- define a box
-
-box = geompy.MakeBox(0., 0., 0., 100., 200., 300.)
-idbox = geompy.addToStudy(box,"box")
-
-# ---- add first face of box in study
-
-subShapeList=geompy.SubShapeAll(box,ShapeTypeFace)
-face=subShapeList[0]
-name = geompy.SubShapeName(face, box)
-print name
-idface=geompy.addToStudyInFather(box,face,name)
-
-# ---- add shell from box in study
-
-subShellList=geompy.SubShapeAll(box,ShapeTypeShell)
-shell = subShellList[0]
-name = geompy.SubShapeName(shell, box)
-print name
-idshell=geompy.addToStudyInFather(box,shell,name)
-
-# ---- add first edge of face in study
-
-edgeList = geompy.SubShapeAll(face,ShapeTypeEdge)
-edge=edgeList[0];
-name = geompy.SubShapeName(edge, face)
-print name
-idedge=geompy.addToStudyInFather(face,edge,name)
-
-
-# ---- SMESH
-
-# ---- create Hypothesis
-
-print "-------------------------- create Hypothesis"
-print "-------------------------- LocalLength"
-hypLen1 = smesh.CreateHypothesis( "LocalLength", "libStdMeshersEngine.so" )
-hypLen1.SetLength(100)
-print hypLen1.GetName()
-print hypLen1.GetId()
-print hypLen1.GetLength()
-
-smeshgui.SetName(salome.ObjectToID(hypLen1), "Local_Length_100")
-
-print "-------------------------- NumberOfSegments"
-hypNbSeg1= smesh.CreateHypothesis( "NumberOfSegments", "libStdMeshersEngine.so" )
-hypNbSeg1.SetNumberOfSegments(7)
-print hypNbSeg1.GetName()
-print hypNbSeg1.GetId()
-print hypNbSeg1.GetNumberOfSegments()
-
-smeshgui.SetName(salome.ObjectToID(hypNbSeg1), "NumberOfSegments_7")
-
-print "-------------------------- MaxElementArea"
-hypArea1 = smesh.CreateHypothesis( "MaxElementArea", "libStdMeshersEngine.so" )
-hypArea1.SetMaxElementArea(2500)
-print hypArea1.GetName()
-print hypArea1.GetId()
-print hypArea1.GetMaxElementArea()
-
-smeshgui.SetName(salome.ObjectToID(hypArea1), "MaxElementArea_2500")
-
-print "-------------------------- MaxElementArea"
-hypArea2 = smesh.CreateHypothesis( "MaxElementArea", "libStdMeshersEngine.so" )
-hypArea2.SetMaxElementArea(500)
-print hypArea2.GetName()
-print hypArea2.GetId()
-print hypArea2.GetMaxElementArea()
-
-smeshgui.SetName(salome.ObjectToID(hypArea2), "MaxElementArea_500")
-
-print "-------------------------- Regular_1D"
-algoReg = smesh.CreateHypothesis( "Regular_1D", "libStdMeshersEngine.so" )
-listHyp=algoReg.GetCompatibleHypothesis()
-for hyp in listHyp:
- print hyp
-print algoReg.GetName()
-print algoReg.GetId()
-
-smeshgui.SetName(salome.ObjectToID(algoReg), "Regular_1D" )
-
-print "-------------------------- MEFISTO_2D"
-algoMef = smesh.CreateHypothesis( "MEFISTO_2D", "libStdMeshersEngine.so" )
-listHyp=algoMef.GetCompatibleHypothesis()
-for hyp in listHyp:
- print hyp
-print algoMef.GetName()
-print algoMef.GetId()
-
-smeshgui.SetName(salome.ObjectToID(algoMef), "MEFISTO_2D" )
-
-# ---- add hypothesis to box
-
-print "-------------------------- add hypothesis to box"
-box=salome.IDToObject(idbox)
-mesh = smesh.CreateMesh(box)
-
-smeshgui.SetName( salome.ObjectToID(mesh), "MeshBox" );
-
-ret=mesh.AddHypothesis(box,algoReg)
-print ret
-ret=mesh.AddHypothesis(box,algoMef)
-print ret
-
-
-ret=mesh.AddHypothesis(box,hypNbSeg1)
-print ret
-ret=mesh.AddHypothesis(box,hypArea1)
-print ret
-
-
-# ---- add hypothesis to edge
-
-print "-------------------------- add hypothesis to edge"
-edge=salome.IDToObject(idedge)
-submesh=mesh.GetSubMesh(edge, "SubMeshEdge")
-
-ret=mesh.AddHypothesis(edge,algoReg)
-print ret
-ret=mesh.AddHypothesis(edge,hypLen1)
-print ret
-
-print "-------------------------- add hypothesis to face"
-face=salome.IDToObject(idface)
-submesh = mesh.GetSubMesh(face, "SubMeshFace")
-
-ret=mesh.AddHypothesis(face,hypArea2)
-print ret
-
-smesh.Compute(mesh, box)
-sg.updateObjBrowser(1);
-
-print
-print "============= Test Supervisor ============================="
-print
-
-comp = catalog.GetComponent("SUPERV")
-if comp is None:
- raise RuntimeError,"Component SUPERV not found in Module Catalog."
-
-from SuperV import *
-import SALOMEDS
-myStudy = salome.myStudy
-myBuilder = myStudy.NewBuilder()
-
-SuperVision = lcc.FindOrLoadComponent("SuperVisionContainer","SUPERV")
-father = myStudy.FindComponent("SUPERV")
-if father is None:
- father = myBuilder.NewComponent("SUPERV")
- A1 = myBuilder.FindOrCreateAttribute(father, "AttributeName");
- FName = A1._narrow(SALOMEDS.AttributeName)
- FName.SetValue( salome.sg.getComponentUserName("SUPERV") )
- A2 = myBuilder.FindOrCreateAttribute(father, "AttributePixMap");
- aPixmap = A2._narrow(SALOMEDS.AttributePixMap);
- aPixmap.SetPixMap( "ICON_OBJBROWSER_Supervision" );
- myBuilder.DefineComponentInstance(father,SuperVision)
-
-def addStudy(ior):
- dataflow = SuperVision.getStreamGraph(ior)
- name=dataflow.Name()
- itr = myStudy.NewChildIterator(father)
- while itr.More():
- item=itr.Value()
- res,A=item.FindAttribute("AttributeName")
- if res:
- aName = A._narrow(SALOMEDS.AttributeName)
- if aName.Value() == name :
- print myBuilder.FindOrCreateAttribute(item, "AttributeIOR")
- A = myBuilder.FindOrCreateAttribute(item, "AttributeIOR")
- print "A = ", A
- if A is not None :
- #res,A = myBuilder.FindOrCreateAttribute(item, "AttributeIOR")
- anIOR = A._narrow(SALOMEDS.AttributeIOR);
- print "anIOR.SetValue(dataflow.getIOR())"
- anIOR.SetValue(dataflow.getIOR())
- return
- itr.Next()
- obj = myBuilder.NewObject(father)
- A=myBuilder.FindOrCreateAttribute(obj, "AttributeName")
- aName=A._narrow(SALOMEDS.AttributeName)
- aName.SetValue(name)
- A=myBuilder.FindOrCreateAttribute(obj, "AttributeIOR")
- anIOR = A._narrow(SALOMEDS.AttributeIOR)
- anIOR.SetValue(dataflow.getIOR())
-
-import os
-dir= os.getenv("SUPERV_ROOT_DIR")
-if dir == None:
- raise RuntimeError, "SUPERV_ROOT_DIR is not defined"
-xmlfile = dir +"/examples/GraphGeomEssai.xml"
-print "Load dataflow from the file : "
-print xmlfile
-print
-
-myGraph = StreamGraph ( xmlfile )
-
-# This DataFlow is "valid" : no loop, correct links between Nodes etc...
-print "myGraph.IsValid() = ", myGraph.IsValid()
-
-# Get Nodes
-myGraph.PrintNodes()
-
-# This DataFlow is "executable" : all pending Ports are defined with Datas
-print myGraph.IsExecutable()
-
-# Starts only execution of that DataFlow and gets control immediatly
-print myGraph.Run()
-
-# That DataFlow is running ==> 0 (false)
-print myGraph.IsDone()
-
-# Events of execution :
-aStatus,aNode,anEvent,aState = myGraph.Event()
-while aStatus :
- print aNode.Thread(),aNode.SubGraph(),aNode.Name(),anEvent,aState
- aStatus,aNode,anEvent,aState = myGraph.Event()
-print "myGraph.IsDone() = ",myGraph.IsDone()
-
-# Wait for Completion (but it is already done after event loop ...)
-print "Done : ",myGraph.DoneW()
-
-print " "
-#print "Type : print myGraph.IsDone()"
-#print " If execution is finished ==> 1 (true)"
-res=myGraph.IsDone()
-if res != 1:
- raise RuntimeError, "myGraph.Run() is not done"
-
-print " "
-print "Type : myGraph.PrintPorts()"
-print " to see input and output values of the graph"
-myGraph.PrintPorts()
-
-# Export will create newsupervisionexample.xml and the corresponding .py file
-tmpdir=os.getenv("TmpDir")
-if tmpdir is None:
- tmpdir="/tmp"
-file = tmpdir + "/newsupervisionexample"
-print "--------------\n"+file+"\n--------------\n"
-myGraph.Export(file)
-
-ior = salome.orb.object_to_string(myGraph.G)
-addStudy(ior)
-
-GraphName = myGraph.Name()
-print "Befor save ",
-#nodes = myGraph.Nodes()
-nodes = myGraph.G.Nodes().FNodes
-length_bs = len(nodes)
-print "ListOfNodes length = ", length_bs
-names=[]
-for node in nodes:
- names.append(node.Name())
-print names
-
-# Graph creation
-GraphInLines = StreamGraph( 'GraphInLines' )
-GraphInLines.SetName( 'GraphInLines' )
-GraphInLines.SetAuthor( '' )
-GraphInLines.SetComment( '' )
-GraphInLines.Coords( 0 , 0 )
-
-# Creation of InLine Nodes
-PyAdd = []
-PyAdd.append( 'def Add(a,b) : ' )
-PyAdd.append( ' return a+b ' )
-PyAdd.append( '' )
-Add = GraphInLines.INode( 'Add' , PyAdd )
-Add.InPort( 'a' , 'long' )
-Add.InPort( 'b' , 'long' )
-Add.OutPort( 'f' , 'long' )
-Add.SetName( 'Add' )
-Add.SetAuthor( '' )
-Add.SetComment( 'Python function' )
-Add.Coords( 351 , 77 )
-PySub = []
-PySub.append( 'def Sub(a,b) : ' )
-PySub.append( ' return a-b ' )
-PySub.append( '' )
-Sub = GraphInLines.INode( 'Sub' , PySub )
-Sub.InPort( 'a' , 'long' )
-Sub.InPort( 'b' , 'long' )
-Sub.OutPort( 'f' , 'long' )
-Sub.SetName( 'Sub' )
-Sub.SetAuthor( '' )
-Sub.SetComment( 'Python function' )
-Sub.Coords( 86 , 333 )
-PyMul = []
-PyMul.append( 'def Mul(a,b) : ' )
-PyMul.append( ' return a*b ' )
-Mul = GraphInLines.INode( 'Mul' , PyMul )
-Mul.InPort( 'a' , 'long' )
-Mul.InPort( 'b' , 'long' )
-Mul.OutPort( 'Result' , 'long' )
-Mul.SetName( 'Mul' )
-Mul.SetAuthor( '' )
-Mul.SetComment( 'Python function' )
-Mul.Coords( 616 , 247 )
-
-# Creation of intermediate Output variables and of Control Links
-Addf = Add.Port( 'f' )
-Mula = GraphInLines.Link( Addf , Mul.Port( 'a' ) )
-Mula.AddCoord( 1 , 570 , 356 )
-Mula.AddCoord( 2 , 570 , 186 )
-Subf = Sub.Port( 'f' )
-Mulb = GraphInLines.Link( Subf , Mul.Port( 'b' ) )
-Mulb.AddCoord( 1 , 282 , 376 )
-Mulb.AddCoord( 2 , 282 , 442 )
-Addb = GraphInLines.Link( Subf , Add.Port( 'b' ) )
-Addb.AddCoord( 1 , 283 , 209 )
-Addb.AddCoord( 2 , 283 , 374 )
-Addb.AddCoord( 3 , 283 , 442 )
-
-# Creation of Input datas
-Adda = Add.Input( 'a' , 1)
-Suba = Sub.Input( 'a' , 3)
-Subb = Sub.Input( 'b' , 4)
-
-# Creation of Output variables
-MulResult = Mul.Port( 'Result' )
-
-GraphInLines.Run()
-
-GraphInLines.DoneW()
-
-GraphInLines.PrintPorts()
-
-sg.updateObjBrowser(1);
-
-print
-print "============= Test VISU and MED ============================="
-print
-
-comp = catalog.GetComponent("VISU")
-if comp is None:
- raise RuntimeError,"Component VISU not found in Module Catalog."
-
-import sys
-import SALOMEDS
-import SALOME
-import SALOME_MED
-import VISU
-
-import visu_gui
-
-medFileName = "pointe.med"
-medFile = os.getenv('KERNEL_ROOT_DIR') + '/examples/' + medFileName
-print "Load ", medFile
-
-studyCurrent = salome.myStudyName
-
-med_comp = salome.lcc.FindOrLoadComponent("FactoryServer", "MED")
-myVisu = salome.lcc.FindOrLoadComponent("FactoryServer", "VISU")
-
-try:
- if os.access(medFile, os.R_OK) :
- if not os.access(medFile, os.W_OK) :
- import random
- medFileNew = "/tmp/" + str(random.randint(0,1000000)) + "_" + medFileName
- print " -- Copy " + medFile + " to " + medFileNew
- os.system("cp "+ medFile + " " + medFileNew)
- medFile = medFileNew
- os.system("chmod 755 " + medFile)
-
- if os.access(medFile, os.W_OK) :
- med_comp.readStructFileWithFieldType(medFile,studyCurrent)
- med_obj = visu_gui.visu.getMedObjectFromStudy()
- print "med_obj - ", med_obj
-
- myField1 = visu_gui.visu.getFieldObjectFromStudy(2,1)
- aMeshName = "maa1"
- anEntity = VISU.NODE
- aTimeStampId = -1
-
- myResult1 = myVisu.ImportMedField(myField1)
- aMesh1 = myVisu.MeshOnEntity(myResult1, aMeshName, anEntity);
-
- aScalarMap1= myVisu.ScalarMapOnField(myResult1, aMeshName, anEntity, myField1.getName(), aTimeStampId)
-
- myResult2 = myVisu.ImportFile(medFile);
- aMesh2 = myVisu.MeshOnEntity(myResult2, aMeshName, anEntity);
-
- aTimeStampId = 3
- aScalarMap2= myVisu.ScalarMapOnField(myResult2, aMeshName, anEntity, myField1.getName(), aTimeStampId)
-
- sg.updateObjBrowser(0)
- else : print "We have no permission to rewrite medFile, so readStructFileWithFieldType can't open this file";
- else : print "We have no permission to read medFile, it will not be opened";
-
-except:
- if sys.exc_type == SALOME.SALOME_Exception :
- print "There is no permission to read " + medFile
- else :
- print sys.exc_type
- print sys.exc_value
- print sys.exc_traceback
-
-sg.updateObjBrowser(1);
+++ /dev/null
-# Copyright (C) 2003 CEA/DEN, EDF R&D
-#
-#
-#
-# File : test_big_table.py
-# Author : Vadim SANDLER
-# Module : SALOME
-# $Header$
-
-import salome
-import math
-import SALOMEDS
-
-# >>> Getting study builder ==================================================
-myStudy = salome.myStudy
-myBuilder = myStudy.NewBuilder()
-
-# >>> Creating virtual component =============================================
-myComponent = myStudy.FindComponent("VirtualComponent")
-if not myComponent:
- myComponent = myBuilder.NewComponent("VirtualComponent")
- aName = myBuilder.FindOrCreateAttribute(myComponent, "AttributeName")
- aName.SetValue("VirtualComponent")
-
-# >>> Creating object with Table of real[ 200 * 20 ] ========================
-myTRealObject = myBuilder.NewObject(myComponent)
-AName = myBuilder.FindOrCreateAttribute(myTRealObject, "AttributeName")
-AName.SetValue("Table Of Real")
-ARealTable = myBuilder.FindOrCreateAttribute(myTRealObject, "AttributeTableOfReal")
-myHorNb = 10
-myVerNb = 200
-
-k={}
-for j in range(0,myHorNb):
- k[j] = j*10+1
-ARealTable.AddRow(k.values())
-ARealTable.SetRowTitle(1, "Frequency")
-ARealTable.SetRowUnit(1, "Hz")
-
-for i in range(1,myVerNb+1):
- for j in range(0,myHorNb):
- if j % 2 == 1:
- k[j] = math.log10(j*30*math.pi/180) * 20 + i * 15 + j*5
- else:
- k[j] = math.sin(j*30*math.pi/180) * 20 + i * 15 + j*5
- ARealTable.AddRow(k.values())
- ARealTable.SetRowTitle(i+1, "Power " + str(i))
- ARealTable.SetRowUnit(i+1, "Wt")
-ARealTable.SetTitle("Very useful data")
-
-# >>> Updating Object Browser ================================================
-salome.sg.updateObjBrowser(1)
-
-# ============================================================================
+++ /dev/null
-# Copyright (C) 2003 CEA/DEN, EDF R&D
-#
-#
-#
-# File : visu_many_objects.py
-# Author : Vadim SANDLER
-# Module : SALOME
-# $Header$
-
-import salome
-import SALOMEDS
-
-# >>> Getting study builder ==================================================
-myStudy = salome.myStudy
-myBuilder = myStudy.NewBuilder()
-
-# >>> Creating virtual component =============================================
-myComponent = myBuilder.NewComponent("VIRTUAL")
-AName = myBuilder.FindOrCreateAttribute(myComponent, "AttributeName")
-AName.SetValue("Virtual")
-ACmt = myBuilder.FindOrCreateAttribute(myComponent, "AttributeComment")
-ACmt.SetValue("Virtual")
-
-# >>> Creating objects =======================================================
-# TO CHANGE TOTAL NUMBER OF OBJECTS, SET PROPER <myNb1>, <myNb2>, <myNb3>
-# IF YOU DON'T WANT TO ADD REFERENCES, SET <myAddRef> = 0
-myNb1 = 20
-myNb2 = 5
-myNb3 = 3
-myAddRef = 1
-
-if myAddRef == 1:
- myContainer = myBuilder.NewObject(myComponent)
- AName = myBuilder.FindOrCreateAttribute(myContainer, "AttributeName")
- AName.SetValue("References")
- ACmt = myBuilder.FindOrCreateAttribute(myContainer, "AttributeComment")
- ACmt.SetValue("Container for objects")
-
-for i in range(0,myNb1):
- myObject1 = myBuilder.NewObject(myComponent)
- AName = myBuilder.FindOrCreateAttribute(myObject1, "AttributeName")
- AName.SetValue("Object "+str(i))
- ACmt = myBuilder.FindOrCreateAttribute(myObject1, "AttributeComment")
- ACmt.SetValue("Virtual object "+str(i))
- if myAddRef == 1:
- myRefObject = myBuilder.NewObject(myContainer)
- myBuilder.Addreference(myRefObject,myObject1);
-
- for j in range(0,myNb2):
- myObject2 = myBuilder.NewObject(myObject1)
- AName = myBuilder.FindOrCreateAttribute(myObject2, "AttributeName")
- AName.SetValue("Object "+str(i)+"-"+str(j))
- ACmt = myBuilder.FindOrCreateAttribute(myObject2, "AttributeComment")
- ACmt.SetValue("Virtual object "+str(i)+"-"+str(j))
- if myAddRef == 1:
- myRefObject = myBuilder.NewObject(myContainer)
- myBuilder.Addreference(myRefObject,myObject2);
-
- for k in range(0,myNb3):
- myObject3 = myBuilder.NewObject(myObject2)
- AName = myBuilder.FindOrCreateAttribute(myObject3, "AttributeName")
- AName.SetValue("Object "+str(i)+"-"+str(j)+"-"+str(k))
- ACmt = myBuilder.FindOrCreateAttribute(myObject3, "AttributeComment")
- ACmt.SetValue("Virtual object "+str(i)+"-"+str(j)+"-"+str(k))
- if myAddRef == 1:
- myRefObject = myBuilder.NewObject(myContainer)
- myBuilder.Addreference(myRefObject,myObject3);
-
-# >>> Updating Object Browser ================================================
-salome.sg.updateObjBrowser(1)
-
-# ============================================================================
-
-
+++ /dev/null
-# Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
-#
-#
-#
-# File : test_remove_ref.py
-# Module : SALOMEDS
-
-from salome import *
-
-myBuilder = myStudy.NewBuilder()
-
-
-obj1 = myStudy.FindObjectID("0:1")
-if obj1 is None: print "Is null obj1 "
-else: print obj1.GetID()
-
-obj2 = myBuilder.NewObject(obj1)
-print "Obj2 ID = "+obj2.GetID()
-
-myBuilder.Addreference(obj1, obj2)
-
-(f, obj3) = obj1.ReferencedObject()
-
-print "Ref obj ID = "+obj3.GetID()
-
-
-myBuilder.RemoveReference(obj1)
-
-(f, obj4) = obj1.ReferencedObject()
-
-print "Ref is found ", f
-
\ No newline at end of file
+++ /dev/null
-# Copyright (C) 2003 CEA/DEN, EDF R&D
-#
-#
-#
-# File : test_table.py
-# Author : Vadim SANDLER
-# Module : SALOME
-# $Header$
-
-import salome
-import math
-import SALOMEDS
-
-# >>> Getting study builder ==================================================
-myStudy = salome.myStudy
-myBuilder = myStudy.NewBuilder()
-
-# >>> Creating virtual component =============================================
-myComponent = myStudy.FindComponent("VirtualComponent")
-if not myComponent:
- myComponent = myBuilder.NewComponent("VirtualComponent")
- aName = myBuilder.FindOrCreateAttribute(myComponent, "AttributeName")
- aName.SetValue("VirtualComponent")
-
-# >>> Creating object with Table of integer ==================================
-myTIntObject = myBuilder.NewObject(myComponent)
-AName = myBuilder.FindOrCreateAttribute(myTIntObject, "AttributeName")
-AName.SetValue("Table Of Integer")
-AIntTable = myBuilder.FindOrCreateAttribute(myTIntObject, "AttributeTableOfInteger")
-
-a=[1,2,3,4,5,6,7,8,9,10]
-AIntTable.AddRow(a)
-a=[110,120,130,140,150,160,170,180,190,200]
-AIntTable.AddRow(a)
-a=[-1,272,0,0,-642,10000,13,578,-578,99]
-AIntTable.AddRow(a)
-AIntTable.SetTitle("TEST table of integer")
-AIntTable.SetRowTitle(1,"FR")
-AIntTable.SetRowUnit(1,"m/h")
-AIntTable.SetRowTitle(2,"SR")
-AIntTable.SetRowUnit(2,"s")
-AIntTable.SetRowTitle(3,"TR")
-AIntTable.SetRowUnit(3,"$")
-c=["C1","C2","C3","C4","C5","C6","C7","C8","C9","C10"]
-AIntTable.SetColumnTitles(c)
-
-# >>> Creating object with Table of real =====================================
-myTRealObject = myBuilder.NewObject(myComponent)
-AName = myBuilder.FindOrCreateAttribute(myTRealObject, "AttributeName")
-AName.SetValue("Table Of Real")
-ARealTable = myBuilder.FindOrCreateAttribute(myTRealObject, "AttributeTableOfReal")
-
-k={}
-l={}
-for j in range(0,20):
- k[j] = j*10+1
- l[j] = "C"+str(j+1)
-ARealTable.AddRow(k.values())
-ARealTable.SetRowTitle(1, "Row 0")
-ARealTable.SetRowUnit(1, "Hz")
-ARealTable.SetColumnTitles(l.values())
-for i in range(1,11):
- for j in range(1,21):
- if j % 2 == 1:
- k[j] = math.log10(j*30*math.pi/180) * 20 + i * 15 + j*5
- else:
- k[j] = math.sin(j*30*math.pi/180) * 20 + i * 15 + j*5
- ARealTable.AddRow(k.values())
- ARealTable.SetRowTitle(i+1, "Row " + str(i))
- ARealTable.SetRowUnit(i+1, "Wt")
-ARealTable.SetTitle("TEST table of real")
-
-# >>> Creating object with integer attribute =================================
-myIntObject = myBuilder.NewObject(myComponent)
-AName = myBuilder.FindOrCreateAttribute(myIntObject, "AttributeName")
-AName.SetValue("Integer")
-AInt = myBuilder.FindOrCreateAttribute(myIntObject, "AttributeInteger")
-AInt.SetValue(123)
-
-# >>> Creating object with real attribute ====================================
-myRealObject = myBuilder.NewObject(myComponent)
-AName = myBuilder.FindOrCreateAttribute(myRealObject, "AttributeName")
-AName.SetValue("Real")
-AReal = myBuilder.FindOrCreateAttribute(myRealObject, "AttributeReal")
-AReal.SetValue(-56.9634)
-
-# >>> Creating object with comment attribute =================================
-myCmtObject = myBuilder.NewObject(myComponent)
-AName = myBuilder.FindOrCreateAttribute(myCmtObject, "AttributeName")
-AName.SetValue("Comment")
-ACmt = myBuilder.FindOrCreateAttribute(myCmtObject, "AttributeComment")
-ACmt.SetValue("Just a comment")
-
-# >>> Updating Object Browser ================================================
-salome.sg.updateObjBrowser(1)
-
-# ============================================================================
-
-
-
+++ /dev/null
-# Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
-#
-#
-#
-# File : testattr.py
-# Module : SALOME
-
-import SALOMEDS
-#import SALOMEDS_Attributes_idl
-import geompy
-import salome
-# ===============================================================
-
-# creating new object ===========================================
-obj = geompy.myBuilder.NewObject(geompy.father)
-
-# adding Name attribute =========================================
-A1 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeName")
-name = A1._narrow(SALOMEDS.AttributeName)
-name.SetValue("First Object")
-
-# adding Comment attribute ======================================
-A2 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeComment")
-comment = A2._narrow(SALOMEDS.AttributeComment)
-comment.SetValue("This is Comment attribute")
-
-# adding IOR attribute ==========================================
-#A3 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeIOR")
-# ...
-
-# adding integer attribute ======================================
-A4 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeInteger")
-integer = A4._narrow(SALOMEDS.AttributeInteger)
-integer.SetValue(12)
-
-# adding real attribute =========================================
-A5 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeReal")
-real = A5._narrow(SALOMEDS.AttributeReal)
-real.SetValue(0.25)
-
-# adding sequence of integer attribute ==========================
-A6 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeSequenceOfInteger")
-intseq = A6._narrow(SALOMEDS.AttributeSequenceOfInteger)
-intseq.Add(1)
-intseq.Add(2)
-intseq.Add(3)
-
-
-# adding sequence of real attribute =============================
-A7 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeSequenceOfReal")
-realseq = A7._narrow(SALOMEDS.AttributeSequenceOfReal)
-realseq.Add(0.001)
-realseq.Add(0.002)
-realseq.Add(0.003)
-
-# adding PersistentRef attribute ================================
-#A8 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributePersistentRef")
-# ...
-
-# adding Drawable attribute =====================================
-A9 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeDrawable")
-drawable = A9._narrow(SALOMEDS.AttributeDrawable)
-drawable.SetDrawable(1)
-
-# adding Selectable attribute ===================================
-#A10 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeSelectable")
-# ...
-
-# adding Expandable attribute ===================================
-#A11 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeExpandable")
-# ...
-
-# adding Opened attribute =======================================
-#A12 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeOpened")
-# ...
-
-# adding TextColor attribute ====================================
-A13 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeTextColor")
-textcolor = A13._narrow(SALOMEDS.AttributeTextColor)
-
-# ...
-
-# adding TextHighlightColor of real attribute ===================
-#A14 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributeTextHighlightColor")
-# ...
-
-# adding PixMap of real attribute ===============================
-#A15 = geompy.myBuilder.FindOrCreateAttribute(obj,"AttributePixMap")
-# ...
-
-# opening OCAF Browser ==========================================
-# result = salome.myStudy.OCAFBrowser()
