Create Build/Vertex help page

diff --git a/check_dump.py b/check_dump.py
new file mode 100644 (file)
index 0000000..9cf8b40
--- /dev/null
+++ b/check_dump.py
@@ -0,0 +1,209 @@
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Sketch_1 = model.addSketch(partSet, model.defaultPlane("XOZ"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "OZ"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchLine_1.setName("SketchLine_5")
+SketchLine_1.result().setName("SketchLine_5")
+SketchLine_2 = Sketch_1.addLine(0.008, 0.0005000000000000006, 0.0075, -1.258295422426014e-35)
+SketchLine_2.setName("SketchLine_9")
+SketchLine_2.result().setName("SketchLine_9")
+SketchLine_2.result().setColor(0, 150, 0)
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "OX"), False)
+SketchLine_3 = SketchProjection_2.createdFeature()
+SketchLine_3.setName("SketchLine_10")
+SketchLine_3.result().setName("SketchLine_10")
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.result())
+SketchConstraintCoincidence_1.setName("SketchConstraintCoincidence_12")
+SketchLine_4 = Sketch_1.addLine(0.0075, -1.258295422426014e-35, 0.005, 0)
+SketchLine_4.setName("SketchLine_11")
+SketchLine_4.result().setName("SketchLine_11")
+SketchLine_4.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_13")
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_3.result())
+SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_14")
+SketchLine_5 = Sketch_1.addLine(0.005, 0, 0.005, 0.02)
+SketchLine_5.setName("SketchLine_12")
+SketchLine_5.result().setName("SketchLine_12")
+SketchLine_5.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_15")
+SketchLine_6 = Sketch_1.addLine(0.005, 0.02, 0, 0.02)
+SketchLine_6.setName("SketchLine_13")
+SketchLine_6.result().setName("SketchLine_13")
+SketchLine_6.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_16")
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
+SketchConstraintVertical_1.setName("SketchConstraintVertical_3")
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintHorizontal_1.setName("SketchConstraintHorizontal_3")
+SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_3.result(), SketchLine_2.result(), 45.00000000000001)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_5.result(), 0.02)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_6.result(), 0.005)
+SketchConstraintLength_2.setName("SketchConstraintLength_4")
+SketchLine_7 = Sketch_1.addLine(0.008, 0.0005000000000000006, 0.008, 0.03)
+SketchLine_7.setName("SketchLine_7")
+SketchLine_7.result().setName("SketchLine_7")
+SketchLine_7.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_6")
+SketchLine_8 = Sketch_1.addLine(0.008, 0.03, 0.007500000000000001, 0.03)
+SketchLine_8.setName("SketchLine_8")
+SketchLine_8.result().setName("SketchLine_8")
+SketchLine_8.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_7")
+SketchArc_1 = Sketch_1.addArc(0.007500000000000001, 0.031, 0.007500000000000001, 0.03, 0.006500000000000001, 0.031, True)
+SketchArc_1.result().setColor(0, 150, 0)
+SketchArc_1.results()[1].setColor(0, 150, 0)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_8")
+SketchLine_9 = Sketch_1.addLine(0.006500000000000001, 0.031, 0.006500000000000001, 0.032)
+SketchLine_9.setName("SketchLine_14")
+SketchLine_9.result().setName("SketchLine_14")
+SketchLine_9.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_9")
+SketchArc_2 = Sketch_1.addArc(0.007500000000000001, 0.032, 0.006500000000000001, 0.032, 0.007500000000000001, 0.033, True)
+SketchArc_2.result().setColor(0, 150, 0)
+SketchArc_2.results()[1].setColor(0, 150, 0)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_10")
+SketchLine_10 = Sketch_1.addLine(0.007500000000000001, 0.033, 0.008999999999999999, 0.033)
+SketchLine_10.setName("SketchLine_15")
+SketchLine_10.result().setName("SketchLine_15")
+SketchLine_10.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_11")
+SketchLine_11 = Sketch_1.addLine(0.008999999999999999, 0.033, 0.008999999999999999, 0.042)
+SketchLine_11.setName("SketchLine_16")
+SketchLine_11.result().setName("SketchLine_16")
+SketchLine_11.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_17")
+SketchLine_12 = Sketch_1.addLine(0.008999999999999999, 0.042, -5.446629538236431e-36, 0.042)
+SketchLine_12.setName("SketchLine_17")
+SketchLine_12.result().setName("SketchLine_17")
+SketchLine_12.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_18")
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_19")
+SketchLine_13 = Sketch_1.addLine(-5.446629538236431e-36, 0.042, 0, 0.02)
+SketchLine_13.setName("SketchLine_18")
+SketchLine_13.result().setName("SketchLine_18")
+SketchLine_13.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_20")
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_13.endPoint())
+SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_21")
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_12.result())
+SketchConstraintHorizontal_2.setName("SketchConstraintHorizontal_2")
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_10.result())
+SketchConstraintHorizontal_3.setName("SketchConstraintHorizontal_4")
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result())
+SketchConstraintHorizontal_4.setName("SketchConstraintHorizontal_5")
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_11.result())
+SketchConstraintVertical_2.setName("SketchConstraintVertical_2")
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintVertical_3.setName("SketchConstraintVertical_4")
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintVertical_4.setName("SketchConstraintVertical_5")
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_9.result())
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_9.result())
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchLine_10.result(), SketchArc_2.results()[1])
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_8.result())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_1.result(), 0.008, True)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_7.result(), 0.0005, True)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_9.endPoint(), SketchLine_13.result(), 0.0065, True)
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 0.001)
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 0.001)
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchArc_2.endPoint(), SketchArc_1.startPoint(), 0.003, True)
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_11.result(), 0.008999999999999999)
+SketchConstraintLength_3.setName("SketchConstraintLength_3")
+SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_13.startPoint(), SketchLine_3.result(), 0.042, True)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_12.result(), 0.008999999999999999)
+SketchConstraintLength_4.setName("SketchConstraintLength_5")
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_22")
+model.do()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1/Face-SketchLine_9r-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_7f-SketchLine_8f-SketchArc_1_2r-SketchLine_14f-SketchArc_2_2r-SketchLine_15f-SketchLine_16f-SketchLine_17f-SketchLine_18f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
+SketchLine_14 = Sketch_2.addLine(-5.446629538236431e-36, 0.042, 5.172728347136208e-22, 0.03963932022500211)
+SketchLine_14.result().setColor(0, 150, 0)
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Sketch_1/Vertex-SketchLine_18s-SketchLine_17e"), False)
+SketchPoint_1 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchPoint_1.result())
+SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_18"), False)
+SketchLine_15 = SketchProjection_4.createdFeature()
+SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.result())
+SketchArc_3 = Sketch_2.addArc(0.02, 0.062, 5.172728347136208e-22, 0.03963932022500211, 0.02, 0.032, False)
+SketchArc_3.result().setColor(0, 150, 0)
+SketchArc_3.results()[1].setColor(0, 150, 0)
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchArc_3.startPoint())
+SketchLine_16 = Sketch_2.addLine(0.02, 0.032, 0.02, 0.042)
+SketchLine_16.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_16.startPoint())
+SketchLine_17 = Sketch_2.addLine(0.02, 0.042, 0, 0.042)
+SketchLine_17.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
+SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchLine_17.endPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_17.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_16.result())
+SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_3.results()[1], 0.03)
+SketchConstraintLength_5 = Sketch_2.setLength(SketchLine_17.result(), 0.02)
+SketchConstraintDistance_6 = Sketch_2.setDistance(SketchLine_14.result(), SketchArc_3.center(), 0.02, True)
+SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_18 = SketchProjection_5.createdFeature()
+SketchConstraintDistance_7 = Sketch_2.setDistance(SketchLine_18.result(), SketchArc_3.center(), 0.062, True)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchArc_1_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 0.008999999999999999, 0.008999999999999999)
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1")])
+Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_13"))
+RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [], model.selection("EDGE", "PartSet/OZ"), 10, 28, [model.selection("SOLID", "Fuse_1_1")])
+Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
+SketchLine_19 = Sketch_3.addLine(0.029, 0.042, 0.029, 0.03267384683690003)
+SketchLine_19.setName("SketchLine_7")
+SketchLine_19.result().setName("SketchLine_7")
+SketchLine_19.result().setColor(0, 150, 0)
+SketchLine_20 = Sketch_3.addLine(0.029, 0.03267384683690003, 0.008999999999999999, 0.042)
+SketchLine_20.setName("SketchLine_8")
+SketchLine_20.result().setName("SketchLine_8")
+SketchLine_20.result().setColor(0, 150, 0)
+SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_8")
+SketchConstraintVertical_6 = Sketch_3.setVertical(SketchLine_19.result())
+SketchLine_21 = Sketch_3.addLine(0.008999999999999999, 0.042, 0.029, 0.042)
+SketchLine_21.setName("SketchLine_9")
+SketchLine_21.result().setName("SketchLine_9")
+SketchLine_21.result().setColor(0, 150, 0)
+SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), False)
+SketchLine_22 = SketchProjection_6.createdFeature()
+SketchLine_22.setName("SketchLine_10")
+SketchLine_22.result().setName("SketchLine_10")
+SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
+SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_9")
+SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_19.startPoint(), SketchLine_21.endPoint())
+SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_10")
+SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_20.endPoint())
+SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_11")
+SketchConstraintHorizontal_6 = Sketch_3.setHorizontal(SketchLine_21.result())
+SketchConstraintAngle_2 = Sketch_3.setAngle(SketchLine_20.result(), SketchLine_21.result(), 25)
+SketchProjection_7 = Sketch_3.addProjection(model.selection("VERTEX", "PartSet/Sketch_1/Vertex-SketchLine_17s-SketchLine_16e"), False)
+SketchPoint_2 = SketchProjection_7.createdFeature()
+SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_20.endPoint())
+SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_12")
+SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_21.result(), 0.02)
+RevolutionCut_1.setNestedSketch(Sketch_3)
+model.do()
+model.end()

diff --git a/doc/gui/Introduction.rst b/doc/gui/Introduction.rst
index 7ff6e457363b1c3461106827e92de15a51436871..fe2de0aaeba945c742f2d89b360758b97140e1b2 100644 (file)
--- a/doc/gui/Introduction.rst
+++ b/doc/gui/Introduction.rst
@@ -44,19 +44,57 @@ user can close any dock window. To open it again he can use a corresponded comma
 \r
 .. _object_browser: \r
 \r
-Object browser \r
+Object browser\r
 ^^^^^^^^^^^^^^\r
 \r
+\r
+\r
 .. _property_panel:\r
 \r
 Property panel\r
 ^^^^^^^^^^^^^^\r
 \r
-By default Property Panel is hidden, and it is shown on operation start.\r
+By default Property Panel is hidden.\r
+\r
+The Property Panel is shown on operation start at left side of the main window by default.\r
+\r
+If Object Browser is shown at the same side then they will be tabbed.\r
+\r
+Property panel consists of two parts:\r
+\r
+- controls container for input of parameters for the current operation;\r
+- buttons panel containing standard buttons:\r
+    \r
+  - **Ok/Apply** executes operation with defined parameters,\r
+  - **Cancel/Close** calls **Abort operation** dialog box to confirm  operation abort,\r
+  - **Help** calls User's guide opened on page describing the current operation.\r
+\r
+.. image:: button_ok.png\r
+   :align: center\r
+\r
+.. centered::\r
+   **OK**  button\r
+\r
+.. image:: button_cancel.png\r
+   :align: center\r
+\r
+.. centered::\r
+   **Cancel**  button\r
+\r
+.. image:: button_help.png\r
+   :align: center\r
+\r
+.. centered::\r
+   **Help**  button\r
+\r
+.. image:: abort_operation.png\r
+   :align: center\r
+\r
+.. centered::\r
+   **Abort operation** dialog box\r
 \r
-By default the Property Panel is shown at left side of the main window.\r
 \r
-If Object Browser is shown at the same side then they will be tabbed\r
+ **OK**  button is disabled if not all input parameters are defined or some errors are found. Error is shown as tooltip and in inspection panel.\r
 \r
 .. _inspection_panel: \r
 \r

diff --git a/doc/gui/abort_operation.png b/doc/gui/abort_operation.png
new file mode 100755 (executable)
index 0000000..ad64065
Binary files /dev/null and b/doc/gui/abort_operation.png differ

diff --git a/doc/gui/button_cancel.png b/doc/gui/button_cancel.png
new file mode 100644 (file)
index 0000000..9af30a2
Binary files /dev/null and b/doc/gui/button_cancel.png differ

diff --git a/doc/gui/button_help.png b/doc/gui/button_help.png
new file mode 100644 (file)
index 0000000..1de7061
Binary files /dev/null and b/doc/gui/button_help.png differ

diff --git a/doc/gui/button_ok.png b/doc/gui/button_ok.png
new file mode 100644 (file)
index 0000000..0297138
Binary files /dev/null and b/doc/gui/button_ok.png differ

diff --git a/doc/gui/new.txt b/doc/gui/new.txt
new file mode 100755 (executable)
index 0000000..a9a7d58
Binary files /dev/null and b/doc/gui/new.txt differ

diff --git a/src/PrimitivesPlugin/doc/PrimitivesPlugin.rst b/src/PrimitivesPlugin/doc/PrimitivesPlugin.rst
index d6da26e54a2c8bc38e0850849283a14235fa7f73..b8d75b48830f694acc72ae101c72c1a70b3e087f 100644 (file)
--- a/src/PrimitivesPlugin/doc/PrimitivesPlugin.rst
+++ b/src/PrimitivesPlugin/doc/PrimitivesPlugin.rst
@@ -4,7 +4,7 @@
 Primitives plug-in
 ==================
 
-The Primitives plug-in contains features dedicated to creation of geometrical primitives. Result of each feature is a solid. The plug-in includes following features:
+The Primitives plug-in contains features dedicated to creation of geometrical primitives. Result of each feature is a solid. The plug-in includes the following features:
 
 .. toctree::
    :titlesonly: