SketchLine_1 = Sketch_1.addLine(14.65001594578831, -16.75950688440132, 21.53989436538019, 4.084511469683225)
SketchLine_1.setName("SketchLine_2")
SketchLine_1.result().setName("SketchLine_1")
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(21.53989436538019, 4.084511469683225, 17.92440575878417, 20.67042582762886)
SketchLine_2.setName("SketchLine_3")
SketchLine_2.result().setName("SketchLine_3")
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_1.setName("SketchConstraintCoincidence_2")
SketchLine_3 = Sketch_1.addLine(17.92440575878417, 20.67042582762886, 6.041293582700577, 31.26820121140768)
SketchLine_3.setName("SketchLine_4")
SketchLine_3.result().setName("SketchLine_4")
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_3")
SketchArc_1 = Sketch_1.addArc(15.73021805614924, 42.13223372900752, 6.041293582700577, 31.26820121140768, 1.302016307518145, 40.2010542198842, True)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_4")
SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
SketchArc_2 = Sketch_1.addArc(5.884297127208473, -13.86204556507233, 14.65001594578831, -16.75950688440132, -3.31891814825968, -14.59275556007859, True)
-SketchArc_2.result().setColor(225, 0, 0)
-SketchArc_2.results()[1].setColor(225, 0, 0)
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_9")
SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
SketchCircle_1 = Sketch_1.addCircle(0, 0, 2)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchPoint_1.result().setColor(170, 0, 225)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchAPI_Point(SketchPoint_1).coordinates())
SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 2)
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-32.04974271012008, 18.88336192109778, 25.20058663660772)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_2.addLine(22.00171526586623, 64.27272727272731, -86.7941680960549, 64.27272727272731)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(-86.7941680960549, 64.27272727272731, -86.7941680960549, -27.54545454545455)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-86.7941680960549, -27.54545454545455, 22.00171526586623, -27.54545454545455)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(22.00171526586623, -27.54545454545455, 22.00171526586623, 64.27272727272731)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -12.17630887873155, 30.26420160631515)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-12.17630887873155, 30.26420160631515, -3.763260360039565, 22.15708212466651)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(-3.763260360039565, 22.15708212466651, -11.56445080464485, 13.8969981244962)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchLine_4 = Sketch_1.addLine(-11.56445080464485, 13.8969981244962, -20.89528643446688, 23.53376279136156)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
SketchLine_5 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -3.763260360039565, 22.15708212466651)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.endPoint())
SketchLine_6 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 15.35730445516949, 31.02902419892351)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(15.35730445516949, 31.02902419892351, 24.53517556646984, 20.93336597649314)
-SketchLine_7.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchLine_8 = Sketch_1.addLine(24.53517556646984, 20.93336597649314, 17.03991415890789, 12.67328197632283)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
SketchLine_9 = Sketch_1.addLine(17.03991415890789, 12.67328197632283, 7.862043047607545, 23.07486923579655)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
SketchLine_10 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 24.53517556646984, 20.93336597649314)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_10.startPoint())
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_10.endPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_11 = Sketch_2.addLine(-6.516621693429666, 11.60253034667112, -9.88184110090646, 19.09779175423307)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-9.88184110090646, 19.09779175423307, -1.162863545171131, 18.94482723571139)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchLine_13 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, 0.8256751956106094, 13.43810456893119)
-SketchLine_13.result().setColor(225, 0, 0)
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchLine_14 = Sketch_2.addLine(0.8256751956106094, 13.43810456893119, -6.516621693429666, 11.60253034667112)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.endPoint())
SketchLine_15 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, -6.516621693429666, 11.60253034667112)
-SketchLine_15.result().setColor(225, 0, 0)
SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint())
SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_15.endPoint())
SketchLine_16 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 15.35730445516949, 18.79186271718972)
-SketchLine_16.result().setColor(225, 0, 0)
SketchLine_17 = Sketch_2.addLine(15.35730445516949, 18.79186271718972, 12.75690764030107, 10.22584967997607)
-SketchLine_17.result().setColor(225, 0, 0)
SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
SketchLine_18 = Sketch_2.addLine(12.75690764030107, 10.22584967997607, 6.179433343869151, 7.778417383629304)
-SketchLine_18.result().setColor(225, 0, 0)
SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
SketchLine_19 = Sketch_2.addLine(6.179433343869151, 7.778417383629304, 6.332397862390824, 16.34443042084296)
-SketchLine_19.result().setColor(225, 0, 0)
SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_19.endPoint())
SketchLine_20 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 12.75690764030107, 10.22584967997607)
-SketchLine_20.result().setColor(225, 0, 0)
SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_20.startPoint())
SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_20.endPoint())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-21.66024096385543, 40.92621620645053, -77.63614457831326, 40.92621620645053)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-77.63614457831326, 40.92621620645053, -77.63614457831326, 1.907518733308514)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-77.63614457831326, 1.907518733308514, -21.66024096385543, 1.907518733308514)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-21.66024096385543, 1.907518733308514, -21.66024096385543, 40.92621620645053)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(65.46746987951809, 41.25025618940838, 10.46506024096384, 41.25025618940838)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(10.46506024096384, 41.25025618940838, 10.46506024096384, -1.337003177360179)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(10.46506024096384, -1.337003177360179, 65.46746987951809, -1.337003177360179)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(65.46746987951809, -1.337003177360179, 65.46746987951809, 41.25025618940838)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
SketchLine_9 = Sketch_1.addLine(-54.27228915662651, 40.92621620645053, -55.24578313253012, 1.907518733308514)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
SketchLine_10 = Sketch_1.addLine(31.88192771084336, 41.25025618940838, 30.42168674698797, -1.337003177360179)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_5.result())
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_11 = Sketch_2.addLine(19.22650602409638, 27.01445783132531, -12.83325439216414, 27.01445783132531)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-12.83325439216414, 27.01445783132531, -12.83325439216414, 11.0281619215649)
-SketchLine_12.result().setColor(225, 0, 0)
SketchLine_13 = Sketch_2.addLine(-12.83325439216414, 11.0281619215649, 19.22650602409638, 11.0281619215649)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(19.22650602409638, 11.0281619215649, 19.22650602409638, 27.01445783132531)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-21.66024096385543, 40.92621620645053, -77.63614457831326, 40.92621620645053)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-77.63614457831326, 40.92621620645053, -77.63614457831326, 1.907518733308514)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-77.63614457831326, 1.907518733308514, -21.66024096385543, 1.907518733308514)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-21.66024096385543, 1.907518733308514, -21.66024096385543, 40.92621620645053)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(65.46746987951809, 41.25025618940838, 10.46506024096384, 41.25025618940838)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(10.46506024096384, 41.25025618940838, 10.46506024096384, -1.337003177360179)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(10.46506024096384, -1.337003177360179, 65.46746987951809, -1.337003177360179)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(65.46746987951809, -1.337003177360179, 65.46746987951809, 41.25025618940838)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
SketchLine_9 = Sketch_1.addLine(-54.27228915662651, 40.92621620645053, -55.24578313253012, 1.907518733308514)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
SketchLine_10 = Sketch_1.addLine(31.88192771084336, 41.25025618940838, 30.42168674698797, -1.337003177360179)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_5.result())
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_11 = Sketch_2.addLine(19.22650602409638, 26.41583731352732, -12.83325439216414, 26.41583731352732)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-12.83325439216414, 26.41583731352732, -12.83325439216414, 12.07337391600091)
-SketchLine_12.result().setColor(225, 0, 0)
SketchLine_13 = Sketch_2.addLine(-12.83325439216414, 12.07337391600091, 19.22650602409638, 12.07337391600091)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(19.22650602409638, 12.07337391600091, 19.22650602409638, 26.41583731352732)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_13.result())
SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
SketchLine_15 = Sketch_2.addLine(0.2648302996693306, 26.41583731352732, -0.2234771832481639, 12.07337391600092)
-SketchLine_15.result().setColor(225, 0, 0)
SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_15.startPoint(), SketchLine_11.result())
SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_13.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(47.26932589060148, 52.61651755566245, -44.41221948537944, 52.61651755566245)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-44.41221948537944, 52.61651755566245, -44.41221948537944, -26.74931734128092)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-44.41221948537944, -26.74931734128092, 47.26932589060148, -26.74931734128092)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(47.26932589060148, -26.74931734128092, 47.26932589060148, 52.61651755566245)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(7.069530544036858, 52.61651755566245, 10.55455403994589, -26.74931734128092)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_6 = Sketch_2.addLine(95.24043941744291, 32.97847252814945, 25.14447162912627, 32.97847252814945)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(25.14447162912627, 32.97847252814945, 25.14447162912627, -11.61656767103746)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(25.14447162912627, -11.61656767103746, 95.24043941744291, -11.61656767103746)
-SketchLine_8.result().setColor(225, 0, 0)
SketchLine_9 = Sketch_2.addLine(95.24043941744291, -11.61656767103746, 95.24043941744291, 32.97847252814945)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
SketchLine_10 = Sketch_2.addLine(63.78513134811883, 32.97847252814945, 65.47170548447893, -11.61656767103746)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchLine_6.result())
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_8.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(21.16527496861552, 26.63979884904572, -22.80735826270614, 26.63979884904572)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-22.80735826270614, 26.63979884904572, -22.80735826270614, -13.87637783487681)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-22.80735826270614, -13.87637783487681, 21.16527496861552, -13.87637783487681)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(21.16527496861552, -13.87637783487681, 21.16527496861552, 26.63979884904572)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(-2.257333687264361, 26.63979884904572, -2.257333687264361, -13.87637783487681)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_6 = Sketch_2.addLine(29.6987556208597, 11.4175813298688, 13.10955704685832, 11.4175813298688)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(13.10955704685832, 11.4175813298688, 13.10955704685832, -4.852594194632538)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(13.10955704685832, -4.852594194632538, 29.6987556208597, -4.852594194632538)
-SketchLine_8.result().setColor(225, 0, 0)
SketchLine_9 = Sketch_2.addLine(29.6987556208597, -4.852594194632538, 29.6987556208597, 11.4175813298688)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(15.15938358623833, 14.4352070421809, -11.43137169301882, 14.4352070421809)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-11.43137169301882, 14.4352070421809, -11.43137169301882, -6.935604568322221)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-11.43137169301882, -6.935604568322221, 15.15938358623833, -6.935604568322221)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(15.15938358623833, -6.935604568322221, 15.15938358623833, 14.4352070421809)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(1.934351860046943, 14.4352070421809, 2.075043686921314, -6.935604568322221)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_6 = Sketch_2.addLine(26.29086071781277, 6.827405438264643, 9.220324256871813, 6.827405438264643)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(9.220324256871813, 6.827405438264643, 9.220324256871813, -3.640935176083419)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(9.220324256871813, -3.640935176083419, 26.29086071781277, -3.640935176083419)
-SketchLine_8.result().setColor(225, 0, 0)
SketchLine_9 = Sketch_2.addLine(26.29086071781277, -3.640935176083419, 26.29086071781277, 6.827405438264643)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
SketchLine_10 = Sketch_2.addLine(18.73204224198193, 6.827405438264643, 19.20309616379092, -3.640935176083419)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchLine_6.result())
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_8.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-77.19749092035903, 24.18794374198263, -26.50243221408208, 23.76942369170098)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-52.21940522238806, 23.98173370989996, -68.62380444441784, 24.11716249058297)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
SketchLine_3 = Sketch_1.addLine(9.658082674231901, 24.38959180621407, 76.00931510902234, 24.79203653255435)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(31.27467463593981, 24.52070441885453, 55.13167389667986, 24.6654059290823)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_3.result())
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_3.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-57.23353499871462, -2.917111725546991, 40.54932729918568, 17.67239476025231)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-81.47249047471176, -8.020952206935315, 40.54932729918568, 17.67239476025231)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.endPoint())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-26.91983967935873, 43.92184368737476, -89.26052104208418, 43.92184368737476)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-89.26052104208418, 43.92184368737476, -89.26052104208418, 10.32264529058116)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-89.26052104208418, 10.32264529058116, -26.91983967935873, 10.32264529058116)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-26.91983967935873, 10.32264529058116, -26.91983967935873, 43.92184368737476)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(92.09418837675352, 44.32665330661324, 12.75150300601203, 44.32665330661324)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(12.75150300601203, 44.32665330661324, 12.75150300601203, 10.32264529058116)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(12.75150300601203, 10.32264529058116, 92.09418837675352, 10.32264529058116)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(92.09418837675352, 10.32264529058116, 92.09418837675352, 44.32665330661324)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_9 = Sketch_2.addLine(-44.32665330661324, 21.65731462925853, -65.78156312625251, 21.65731462925853)
-SketchLine_9.result().setColor(225, 0, 0)
SketchLine_10 = Sketch_2.addLine(-65.78156312625251, 21.65731462925853, -65.78156312625251, -10.72745490981964)
-SketchLine_10.result().setColor(225, 0, 0)
SketchLine_11 = Sketch_2.addLine(-65.78156312625251, -10.72745490981964, -44.32665330661324, -10.72745490981964)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-44.32665330661324, -10.72745490981964, -44.32665330661324, 21.65731462925853)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
SketchLine_13 = Sketch_2.addLine(64.56713426853709, 24.08617234468937, 42.70741482965934, 24.08617234468937)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(42.70741482965934, 24.08617234468937, 42.70741482965934, -10.32264529058116)
-SketchLine_14.result().setColor(225, 0, 0)
SketchLine_15 = Sketch_2.addLine(42.70741482965934, -10.32264529058116, 64.56713426853709, -10.32264529058116)
-SketchLine_15.result().setColor(225, 0, 0)
SketchLine_16 = Sketch_2.addLine(64.56713426853709, -10.32264529058116, 64.56713426853709, 24.08617234468937)
-SketchLine_16.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(24.08617234468939, 57.68537074148297, -74.28256513026052, 57.68537074148297)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-74.28256513026052, 57.68537074148297, -74.28256513026052, 13.96593186372746)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-74.28256513026052, 13.96593186372746, 24.08617234468939, 13.96593186372746)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(24.08617234468939, 13.96593186372746, 24.08617234468939, 57.68537074148297)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_5 = Sketch_2.addLine(-6.679358717434877, 28.9438877755511, -34.20641282565131, 28.9438877755511)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_2.addLine(-34.20641282565131, 28.9438877755511, -34.20641282565131, -14.37074148296594)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(-34.20641282565131, -14.37074148296594, -6.679358717434877, -14.37074148296594)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(-6.679358717434877, -14.37074148296594, -6.679358717434877, 28.9438877755511)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-11.4055110220441, 59.07236770836705, -90.54579158316633, 59.07236770836705)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-90.54579158316633, 59.07236770836705, -90.54579158316633, 18.29259905792451)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-90.54579158316633, 18.29259905792451, -11.4055110220441, 18.29259905792451)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-11.4055110220441, 18.29259905792451, -11.4055110220441, 59.07236770836705)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(116.15, 58.70699100906781, 29.5612224448898, 58.70699100906781)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(29.5612224448898, 58.70699100906781, 29.5612224448898, 16.80919541788544)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(29.5612224448898, 16.80919541788544, 116.15, 16.80919541788544)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(116.15, 16.80919541788544, 116.15, 58.70699100906781)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
SketchLine_9 = Sketch_1.addLine(-51.44118236472945, 59.07236770836705, -50.51012024048097, 18.29259905792451)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
SketchLine_10 = Sketch_1.addLine(72.85561122244489, 16.80919541788544, 73.32114228456915, 58.70699100906781)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_7.result())
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_5.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_11 = Sketch_2.addLine(-33.65512410802471, 32.35440881763527, -66.62101906518004, 32.35440881763527)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-66.62101906518004, 32.35440881763527, -66.62101906518004, -10.93997995991984)
-SketchLine_12.result().setColor(225, 0, 0)
SketchLine_13 = Sketch_2.addLine(-66.62101906518004, -10.93997995991984, -33.65512410802471, -10.93997995991984)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(-33.65512410802471, -10.93997995991984, -33.65512410802471, 32.35440881763527)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_13.result())
SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
SketchLine_15 = Sketch_2.addLine(-66.62101906518004, 10.47444889779559, -33.6551241080247, 9.543386773547091)
-SketchLine_15.result().setColor(225, 0, 0)
SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_15.startPoint(), SketchLine_12.result())
SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_14.result())
SketchLine_16 = Sketch_2.addLine(86.07316931157348, 30.95781563126252, 62.43123950606181, 30.95781563126252)
-SketchLine_16.result().setColor(225, 0, 0)
SketchLine_17 = Sketch_2.addLine(62.43123950606181, 30.95781563126252, 62.43123950606181, -14.66422845691383)
-SketchLine_17.result().setColor(225, 0, 0)
SketchLine_18 = Sketch_2.addLine(62.43123950606181, -14.66422845691383, 86.07316931157348, -14.66422845691383)
-SketchLine_18.result().setColor(225, 0, 0)
SketchLine_19 = Sketch_2.addLine(86.07316931157348, -14.66422845691383, 86.07316931157348, 30.95781563126252)
-SketchLine_19.result().setColor(225, 0, 0)
SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_16.startPoint())
SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_18.result())
SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_19.result())
SketchLine_20 = Sketch_2.addLine(62.43123950606181, 3.491482965931855, 86.07316931157347, 4.888076152304602)
-SketchLine_20.result().setColor(225, 0, 0)
SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_20.startPoint(), SketchLine_17.result())
SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_19.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-8.703406813627256, 48.70884844011781, -89.26052104208418, 48.70884844011781)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-89.26052104208418, 48.70884844011781, -89.26052104208418, 1.699676379809279)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-89.26052104208418, 1.699676379809279, -8.703406813627256, 1.699676379809279)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-8.703406813627256, 1.699676379809279, -8.703406813627256, 48.70884844011781)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(-50.39879759519037, 48.70884844011781, -49.99398797595192, 1.699676379809278)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_6 = Sketch_2.addLine(-27.69909819639279, -33.75100200400802, -61.96570844393754, -33.75100200400802)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(-61.96570844393754, -33.75100200400802, -61.96570844393754, 19.31953907815632)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(-61.96570844393754, 19.31953907815632, -27.69909819639279, 19.31953907815632)
-SketchLine_8.result().setColor(225, 0, 0)
SketchLine_9 = Sketch_2.addLine(-27.69909819639279, 19.31953907815632, -27.69909819639279, -33.75100200400802)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
SketchLine_10 = Sketch_2.addLine(-61.96570844393754, -12.80210420841683, -27.69909819639279, -13.26763527054108)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchLine_7.result())
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_9.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-8.142167372244474, 30.79863310370742, -42.12686596943888, 30.79863310370742)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-42.12686596943888, 30.79863310370742, -42.12686596943888, -6.018123709919844)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-42.12686596943888, -6.018123709919844, -8.142167372244474, -6.018123709919844)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-8.142167372244474, -6.018123709919844, -8.142167372244474, 30.79863310370742)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(49.91502606462924, 30.79863310370742, 15.22231291332662, 30.79863310370742)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(15.22231291332662, 30.79863310370742, 15.22231291332662, -5.310109155811627)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(15.22231291332662, -5.310109155811627, 49.91502606462924, -5.310109155811627)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(49.91502606462924, -5.310109155811627, 49.91502606462924, 30.79863310370742)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchLine_9 = Sketch_2.addLine(32.99903071986655, 54.47604223124301, -21.74338409862735, 54.47604223124301)
-SketchLine_9.result().setColor(225, 0, 0)
SketchLine_10 = Sketch_2.addLine(-21.74338409862735, 54.47604223124301, -21.74338409862735, -10.16156298864041)
-SketchLine_10.result().setColor(225, 0, 0)
SketchLine_11 = Sketch_2.addLine(-21.74338409862735, -10.16156298864041, 32.99903071986655, -10.16156298864041)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(32.99903071986655, -10.16156298864041, 32.99903071986655, 54.47604223124301)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-29.34869739478959, 31.37274549098196, -65.37675350701403, 31.37274549098196)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-65.37675350701403, 31.37274549098196, -65.37675350701403, -6.274549098196388)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-65.37675350701403, -6.274549098196388, -29.34869739478959, -6.274549098196388)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-29.34869739478959, -6.274549098196388, -29.34869739478959, 31.37274549098196)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(41.08817635270542, 32.5871743486974, 11.5370741482966, 32.5871743486974)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(11.5370741482966, 32.5871743486974, 11.5370741482966, -8.703406813627252)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(11.5370741482966, -8.703406813627252, 41.08817635270542, -8.703406813627252)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(41.08817635270542, -8.703406813627252, 41.08817635270542, 32.5871743486974)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_9 = Sketch_2.addLine(-36.83851213815001, 4.871192068212162, -37.23534778672252, 23.01200273357838)
-SketchLine_9.result().setColor(225, 0, 0)
SketchLine_10 = Sketch_2.addLine(-37.23534778672252, 23.01200273357838, -8.095368404429529, 22.8820142517576)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
SketchLine_11 = Sketch_2.addLine(-8.095368404429529, 22.8820142517576, 20.86605178109317, 22.08563377543123)
-SketchLine_11.result().setColor(225, 0, 0)
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
SketchLine_12 = Sketch_2.addLine(20.86605178109317, 22.08563377543123, 22.14286343998464, -2.004860047909258)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchLine_13 = Sketch_2.addLine(22.14286343998464, -2.004860047909258, -4.857114760245733, -1.198368777231491)
-SketchLine_13.result().setColor(225, 0, 0)
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchLine_14 = Sketch_2.addLine(-4.857114760245733, -1.198368777231491, -36.83851213815001, 4.871192068212162)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchLine_14.endPoint())
SketchLine_15 = Sketch_2.addLine(-4.857114760245733, -1.198368777231491, -8.095368404429529, 22.8820142517576)
-SketchLine_15.result().setColor(225, 0, 0)
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_15.startPoint())
SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_15.endPoint())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-10.72745490981964, 42.70741482965933, -40.27855711422846, 42.70741482965933)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-40.27855711422846, 42.70741482965933, -40.27855711422846, 9.513026052104207)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-40.27855711422846, 9.513026052104207, -10.72745490981964, 9.513026052104207)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-10.72745490981964, 9.513026052104207, -10.72745490981964, 42.70741482965933)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(51.61322645290581, 42.70741482965933, 15.98997995991983, 42.70741482965933)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(15.98997995991983, 42.70741482965933, 15.98997995991983, 8.298597194388774)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(15.98997995991983, 8.298597194388774, 51.61322645290581, 8.298597194388774)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(51.61322645290581, 8.298597194388774, 51.61322645290581, 42.70741482965933)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_9 = Sketch_2.addLine(-17.20440881763527, 19.22845691382766, -33.80160320641282, 19.22845691382766)
-SketchLine_9.result().setColor(225, 0, 0)
SketchLine_10 = Sketch_2.addLine(-33.80160320641282, 19.22845691382766, -33.80160320641282, -6.679358717434865)
-SketchLine_10.result().setColor(225, 0, 0)
SketchLine_11 = Sketch_2.addLine(-33.80160320641282, -6.679358717434865, -17.20440881763527, -6.679358717434865)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-17.20440881763527, -6.679358717434865, -17.20440881763527, 19.22845691382766)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
SketchLine_13 = Sketch_2.addLine(41.4929859719439, 21.25250501002005, 26.51503006012023, 21.25250501002005)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(26.51503006012023, 21.25250501002005, 26.51503006012023, -9.917835671342685)
-SketchLine_14.result().setColor(225, 0, 0)
SketchLine_15 = Sketch_2.addLine(26.51503006012023, -9.917835671342685, 41.4929859719439, -9.917835671342685)
-SketchLine_15.result().setColor(225, 0, 0)
SketchLine_16 = Sketch_2.addLine(41.4929859719439, -9.917835671342685, 41.4929859719439, 21.25250501002005)
-SketchLine_16.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-19.01903137581643, 2.528314065029049, 44.55011038017909)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")])
Sphere_1 = model.addSphere(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), 10)
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(35.42084168336675, 22.87174348697394, -27.32464929859721, 22.87174348697394)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-27.32464929859721, 22.87174348697394, -27.32464929859721, -13.08560194713185)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-27.32464929859721, -13.08560194713185, 35.42084168336675, -13.08560194713185)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(35.42084168336675, -13.08560194713185, 35.42084168336675, 22.87174348697394)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(4.250501002003999, 22.87174348697394, 4.250501002003999, -13.08560194713185)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(-28.13426853707415, 23.27655310621242)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(10.32264529058116, 23.27655310621242)
-SketchPoint_2.result().setColor(225, 0, 0)
SketchPoint_3 = Sketch_1.addPoint(47.56513026052106, 23.27655310621242)
-SketchPoint_3.result().setColor(225, 0, 0)
model.do()
Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2")])
Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_3")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(15.05904629113425, 12.50050543761873)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(47.25352258215165, 31.63008715695855)
-SketchPoint_2.result().setColor(225, 0, 0)
model.do()
Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2")])
Common_1 = model.addCommon(Part_1_doc, [model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_1_2")])
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_3 = Sketch_2.addPoint(15.05904629113425, 12.50050543761873)
-SketchPoint_3.result().setColor(225, 0, 0)
SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), False)
SketchPoint_4 = SketchProjection_1.createdFeature()
-SketchPoint_4.result().setColor(170, 0, 225)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchPoint_3.coordinates(), SketchPoint_4.result())
model.do()
Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_2/Vertex-SketchPoint_3-SketchProjection_1-SketchPoint_4")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-88.6588483815807, 35.68247765805569, -60.62456998069012, -7.998839850308682)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-60.62456998069012, -7.998839850308682, -33.24225154261096, 37.63835754648991)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(22.82630525917019, 37.63835754648991, 47.60078384600371, -9.954719738742909)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(47.60078384600371, -9.954719738742909, 74.33114232127146, 36.3344376208671)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_5 = Sketch_2.addLine(-75.23467769579756, 14.76574658950986, -60.62456998069012, -7.998839850308684)
-SketchLine_5.result().setColor(225, 0, 0)
SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), False)
SketchLine_6 = SketchProjection_1.createdFeature()
-SketchLine_6.result().setColor(170, 0, 225)
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_5.startPoint(), SketchLine_6.result())
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_6).endPoint(), SketchLine_5.endPoint())
SketchLine_7 = Sketch_2.addLine(-60.62456998069012, -7.998839850308684, -47.51524103341781, 13.8500417284785)
-SketchLine_7.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), False)
SketchLine_8 = SketchProjection_2.createdFeature()
-SketchLine_8.result().setColor(170, 0, 225)
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
SketchLine_9 = Sketch_2.addLine(35.74952364371219, 12.81217486039606, 47.60078384600371, -9.954719738742909)
-SketchLine_9.result().setColor(225, 0, 0)
SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), False)
SketchLine_10 = SketchProjection_3.createdFeature()
-SketchLine_10.result().setColor(170, 0, 225)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchLine_10.result())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_10).endPoint(), SketchLine_9.endPoint())
SketchLine_11 = Sketch_2.addLine(47.60078384600371, -9.954719738742909, 64.13719888777418, 18.68151118724985)
-SketchLine_11.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_11.startPoint())
SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), False)
SketchLine_12 = SketchProjection_4.createdFeature()
-SketchLine_12.result().setColor(170, 0, 225)
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.result())
model.do()
Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-44.32557091040492, 34.37855773243287, -1.296213364851963, -18.43019925529121)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-1.296213364851963, -18.43019925529121, 39.1253043294554, 29.81483799275304)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_3 = Sketch_2.addLine(-15.313984501828, -1.226571041729713, -1.296213364851965, -18.43019925529121)
-SketchLine_3.result().setColor(225, 0, 0)
SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), False)
SketchLine_4 = SketchProjection_1.createdFeature()
-SketchLine_4.result().setColor(170, 0, 225)
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.startPoint(), SketchLine_4.result())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_4).endPoint(), SketchLine_3.endPoint())
SketchLine_5 = Sketch_2.addLine(-1.296213364851965, -18.43019925529121, 20.70651786493702, 7.831125115747244)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_5.startPoint())
SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), False)
SketchLine_6 = SketchProjection_2.createdFeature()
-SketchLine_6.result().setColor(170, 0, 225)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
model.do()
Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-65.75962883650391, 1.812165175943577, 20.84344758927215)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(-64.98081644495703, 22.64105757725738, -64.58019600110421, -18.99788637597517)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchCircle_1.results()[1])
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1])
SketchCircle_2 = Sketch_1.addCircle(62.53870966583226, 1.604010602289747, 23.75523331537361)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(63.75890236666707, 25.3278854890081, 63.76050419996562, -22.11978184293701)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchCircle_2.results()[1])
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchCircle_2.results()[1])
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_3 = Sketch_2.addCircle(-32.47294132465983, 2.220594155120791, 24.592292084386)
-SketchCircle_3.result().setColor(225, 0, 0)
-SketchCircle_3.results()[1].setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-57.05151402373072, 3.041930894979393, -7.893787575150295, 1.41683366733466)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_3.startPoint(), SketchCircle_3.results()[1])
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchCircle_3.results()[1])
SketchCircle_4 = Sketch_2.addCircle(107.0005131452338, 2.231606536656211, 32.56614591098422)
-SketchCircle_4.result().setColor(225, 0, 0)
-SketchCircle_4.results()[1].setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(74.45658844157124, 3.434446666454839, 139.5031967571015, 0.1995097076777023)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchCircle_4.results()[1])
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchCircle_4.results()[1])
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-23.21770404974615, 0.697956782029321, 35.59095357943583)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(-23.86759161364122, 36.28297642299413, -22.5735889911581, -34.88716781357743)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchCircle_1.results()[1])
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1])
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_2 = Sketch_2.addCircle(32.08143103297851, 1.286314091165838, 40.2404383217231)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(-8.153954725266397, 0.6486549270159857, 72.23884334545456, 3.869938036363647)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchCircle_2.results()[1])
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchCircle_2.results()[1])
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-13.70458696967078, 45.46669742770666, 15.88340489230536, 45.46669742770666)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-13.21145377197118, 31.16583469441819, 14.89713849690615, 31.41240129326799)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-5.074756009927738, 49.65832960815328, -4.828189411077946, 26.48106931627197)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(7.993273729111718, 49.41176300930348, 8.23984032796152, 26.48106931627197)
-SketchLine_4.result().setColor(225, 0, 0)
model.do()
Compound_1 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Compound_2 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-28.62948623265935, 53.77363153293705, 40.23707952134417, 53.11775947813702)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-26.66187006825925, 26.22700523133564, 40.89295157614425, 26.22700523133564)
-SketchLine_2.result().setColor(225, 0, 0)
model.do()
Compound_1 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 10)
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_3 = Sketch_2.addLine(14.6580693841429, 60.98822413573743, -10.2650686982584, 60.98822413573743)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(-10.2650686982584, 60.98822413573743, -10.2650686982584, 18.35654057373522)
-SketchLine_4.result().setColor(225, 0, 0)
SketchLine_5 = Sketch_2.addLine(-10.2650686982584, 18.35654057373522, 14.6580693841429, 18.35654057373522)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_2.addLine(14.6580693841429, 18.35654057373522, 14.6580693841429, 60.98822413573743)
-SketchLine_6.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-25.12006861063466, 20.61578044596912, 27.54545454545454, 58.72898799313897)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-19.22984562607204, 56.30360205831907, 22.69468267581474, 22.00171526586621)
-SketchLine_2.result().setColor(225, 0, 0)
model.do()
Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
Cut_1 = model.addCut(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("EDGE", "Edge_1_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-30.96793587174349, 41.08817635270543, 39.4689378757515, 41.4929859719439)
-SketchLine_1.result().setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_2 = Sketch_2.addLine(13.96593186372747, 52.01803607214429, -9.917835671342695, 52.01803607214429)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-9.917835671342695, 52.01803607214429, -9.917835671342695, 27.32464929859719)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(-9.917835671342695, 27.32464929859719, 13.96593186372747, 27.32464929859719)
-SketchLine_4.result().setColor(225, 0, 0)
SketchLine_5 = Sketch_2.addLine(13.96593186372747, 27.32464929859719, 13.96593186372747, 52.01803607214429)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-49.71737993138937, 2.062011149228122, 25.20652382544127)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchCircle_2 = Sketch_1.addCircle(41.46933533447686, 0.6873370497427074, 27.03914027119833)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_3 = Sketch_2.addCircle(-15.35052744425385, 1.145561749571189, 23.35148318113706)
-SketchCircle_3.result().setColor(225, 0, 0)
-SketchCircle_3.results()[1].setColor(225, 0, 0)
SketchCircle_4 = Sketch_2.addCircle(82.70955831903943, -3.436685248713552, 26.06650182177207)
-SketchCircle_4.result().setColor(225, 0, 0)
-SketchCircle_4.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_1/Edge-SketchCircle_2_2")])
Face_2 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-6.063464837049752, 0.8662092624356818, 32.2304349637617)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")])
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchPoint_1.result().setColor(170, 0, 225)
SketchCircle_2 = Sketch_2.addCircle(33.45888578231592, 3.635557519489646, 33.65582143213236)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_2.results()[1])
model.do()
Face_2 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-8.850181926352695, 1.062021831162306, 46.73432400996293)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")])
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchLine_1 = Sketch_2.addLine(64.95207814695526, 55.29739830292169, -8.272875875352462, 55.29739830292169)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(-8.272875875352462, 55.29739830292169, -8.272875875352462, -5.036618941767999)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-8.272875875352462, -5.036618941767999, 64.95207814695526, -5.036618941767999)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(64.95207814695526, -5.036618941767999, 64.95207814695526, 55.29739830292169)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-174.3348611545506, 14.32227876658794, 70.49121821473575)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(-170.8787982705978, 84.72872358712971, -177.6798961073988, -56.0895283864863)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchCircle_1.results()[1])
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1])
SketchCircle_2 = Sketch_1.addCircle(156.5938368884866, -3.269359348234124, 86.69415181338225)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(159.264749945663, 83.38363934242156, 152.8285624017236, -89.88170642808817)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchCircle_2.results()[1])
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchCircle_2.results()[1])
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_3 = Sketch_2.addCircle(-63.56168377478743, 4.78844798363732, 75.55300890562218)
-SketchCircle_3.result().setColor(225, 0, 0)
-SketchCircle_3.results()[1].setColor(225, 0, 0)
SketchCircle_4 = Sketch_2.addCircle(322.6564034385849, -22.92418256149703, 118.030609731015)
-SketchCircle_4.result().setColor(225, 0, 0)
-SketchCircle_4.results()[1].setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-138.9405630492767, 9.915017403336009, 11.9830331245263, 5.907779612586542)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_3.startPoint(), SketchCircle_3.results()[1])
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchCircle_3.results()[1])
SketchLine_4 = Sketch_2.addLine(207.6267015097382, 3.521847530670962, 440.2647819790861, -32.89885701981125)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchCircle_4.results()[1])
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchCircle_4.results()[1])
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-32.92409574173262, 1.332083115848444, 52.41665939244462)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(-32.3899127495535, 53.7460204836366, -32.9246838934834, -51.08457627329644)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchCircle_1.results()[1])
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1])
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_2 = Sketch_2.addCircle(52.19056504290929, 1.630574981545157, 59.89949304384059)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(112.0898160449407, 1.460291967886176, -7.70480537031941, 0.9278161529026914)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchCircle_2.results()[1])
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchCircle_2.results()[1])
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-64.66755707084829, 12.13132840151158, 21.07964902130243)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchCircle_2 = Sketch_1.addCircle(45.61684376247555, 1.775642744728198, 22.96122819474142)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_3 = Sketch_2.addCircle(-36.49725872565889, 7.160803013521951, 17.872664608039)
-SketchCircle_3.result().setColor(225, 0, 0)
-SketchCircle_3.results()[1].setColor(225, 0, 0)
SketchCircle_4 = Sketch_2.addCircle(78.03127953954764, -3.93858425080257, 22.76570299983515)
-SketchCircle_4.result().setColor(225, 0, 0)
-SketchCircle_4.results()[1].setColor(225, 0, 0)
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 20, 20)
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(15.58517034068135, 30.56312625250501, -33.39679358717434, 30.56312625250501)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-33.39679358717434, 30.56312625250501, -33.39679358717434, -16.39478957915832)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-33.39679358717434, -16.39478957915832, 15.58517034068135, -16.39478957915832)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(15.58517034068135, -16.39478957915832, 15.58517034068135, 30.56312625250501)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_5 = Sketch_2.addLine(35.01603206412826, 45.13627254509017, -8.298597194388776, 45.13627254509017)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_2.addLine(-8.298597194388776, 45.13627254509017, -8.298597194388776, 6.679358717434865)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(-8.298597194388776, 6.679358717434865, 35.01603206412826, 6.679358717434865)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(35.01603206412826, 6.679358717434865, 35.01603206412826, 45.13627254509017)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(-61.63122212692967, 34.13774013722127)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(-27.26436963979418, 34.59596483704974)
-SketchPoint_2.result().setColor(225, 0, 0)
SketchPoint_3 = Sketch_1.addPoint(25.43147084048027, 34.59596483704974)
-SketchPoint_3.result().setColor(225, 0, 0)
SketchPoint_4 = Sketch_1.addPoint(54.29962692967411, 33.67951543739281)
-SketchPoint_4.result().setColor(225, 0, 0)
model.do()
Compound_1_objects = [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_3"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_4")]
Compound_1 = model.addCompound(Part_1_doc, Compound_1_objects)
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_2.addLine(42.11715050385933, 45.75316349699826, -43.32915483490565, 45.75316349699826)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(-43.32915483490565, 45.75316349699826, -43.32915483490565, 20.90707471054887)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-43.32915483490565, 20.90707471054887, 42.11715050385933, 20.90707471054887)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(42.11715050385933, 20.90707471054887, 42.11715050385933, 45.75316349699826)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(-61.63122212692967, 34.13774013722127)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(-27.26436963979418, 34.59596483704974)
-SketchPoint_2.result().setColor(225, 0, 0)
SketchPoint_3 = Sketch_1.addPoint(25.43147084048027, 34.59596483704974)
-SketchPoint_3.result().setColor(225, 0, 0)
SketchPoint_4 = Sketch_1.addPoint(54.29962692967411, 33.67951543739281)
-SketchPoint_4.result().setColor(225, 0, 0)
model.do()
Compound_1_objects = [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_3"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_4")]
Compound_1 = model.addCompound(Part_1_doc, Compound_1_objects)
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(0, 50)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(0, 25)
-SketchPoint_2.result().setColor(225, 0, 0)
model.do()
Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1")])
Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-64.96569468267583, 22.00171526586621, -41.05831903945112, 55.95711835334479)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-41.05831903945112, 55.95711835334479, -23.04116638078903, 21.65523156089195)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(14.72555746140652, 19.92281303602059, 33.43567753001715, 55.95711835334479)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(33.43567753001715, 55.95711835334479, 50.75986277873073, 22.69468267581476)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_5 = Sketch_2.addLine(-67.39108061749573, 66.6981132075472, -42.44425385934821, 35.51457975986279)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_2.addLine(-42.44425385934821, 35.51457975986279, -16.1114922813036, 69.1234991423671)
-SketchLine_6.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchLine_7 = Sketch_2.addLine(12.64665523156088, 66.6981132075472, 35.16809605488852, 36.5540308747856)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(35.16809605488852, 36.5540308747856, 52.49228130360206, 66.35162950257292)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
model.do()
Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-26.15951972555746, 50.06689536878219, -17.15094339622642, 14.37907375643225)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-17.15094339622642, 14.37907375643225, 26.85248713550602, 14.72555746140652)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(26.85248713550602, 14.72555746140652, 34.47512864493997, 50.41337907375645)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_2.addCircle(3.984562607204112, 58.72898799313897, 38.16357190022508)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Wire_1_objects = [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3")]
Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-67.98180952066137, 66.89107262893774, -22.72663773945906, 26.22700523133564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-22.72663773945906, 26.22700523133564, 31.71074280894377, 25.5711331765356)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(31.71074280894377, 25.5711331765356, 74.99829842574599, 68.85868879333785)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchLine_4 = Sketch_1.addLine(-58.79960075346089, 25.5711331765356, 3.508244452542322, 60.3323520809374)
-SketchLine_4.result().setColor(225, 0, 0)
SketchLine_5 = Sketch_1.addLine(3.508244452542322, 60.3323520809374, 63.1926014393454, 22.94764495733547)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
model.do()
Wire_1_objects = [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3")]
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-31.7032590051458, 14.72555746140652, 29.35516607310447)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_2 = Sketch_2.addCircle(12.30017152658664, 14.37907375643225, 29.61574408620473)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")])
Smash_1 = model.addSmash(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Face_1_2")])
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
ParamAperture = model.addParameter(Part_1_doc, "Aperture", "360")
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchArc_1 = Sketch_1.addArc(0, 0, 0, -50, 0, 50, False)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(0, 50, 0, -50)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
