void MEDCouplingUMesh::checkCoherency() const
{
if(_mesh_dim<-1)
- throw INTERP_KERNEL::Exception("No mesh dimension specified !");
+ throw INTERP_KERNEL::Exception("No mesh dimension specified !");
if(_mesh_dim!=-1)
MEDCouplingPointSet::checkCoherency();
for(std::set<INTERP_KERNEL::NormalizedCellType>::const_iterator iter=_types.begin();iter!=_types.end();iter++)
*/
void MEDCouplingUMesh::checkFastEquivalWith(const MEDCouplingMesh *other, double prec) const
{
- MEDCouplingPointSet::checkFastEquivalWith(other,prec);
- const MEDCouplingUMesh *otherC=dynamic_cast<const MEDCouplingUMesh *>(other);
+ MEDCouplingPointSet::checkFastEquivalWith(other,prec);
+ const MEDCouplingUMesh *otherC=dynamic_cast<const MEDCouplingUMesh *>(other);
if(!otherC)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::checkFastEquivalWith : Two meshes are not not unstructured !");
}
* \param [out] neighborsIndx is an array of size this->getNumberOfCells()+1 newly allocated and should be dealt by the caller. This arrays allow to use the first output parameter \b neighbors.
*/
void MEDCouplingUMesh::ComputeNeighborsOfCellsAdv(const DataArrayInt *desc, const DataArrayInt *descIndx, const DataArrayInt *revDesc, const DataArrayInt *revDescIndx,
- DataArrayInt *&neighbors, DataArrayInt *&neighborsIndx) throw(INTERP_KERNEL::Exception)
+ DataArrayInt *&neighbors, DataArrayInt *&neighborsIndx)
{
if(!desc || !descIndx || !revDesc || !revDescIndx)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::ComputeNeighborsOfCellsAdv some input array is empty !");
if(cm.isDynamic())
{
switch(cm.getDimension())
- {
+ {
case 2:
{
INTERP_KERNEL::AutoPtr<int> tmp=new int[lgthOfCurCell-1];
newType=(lgthOfCurCell==3)?INTERP_KERNEL::NORM_SEG2:INTERP_KERNEL::NORM_POLYL;
break;
}
- }
+ }
ret=ret || (newType!=type);
conn[newPos]=newType;
newPos+=newLgth+1;
int MEDCouplingUMesh::AreCellsEqual(const int *conn, const int *connI, int cell1, int cell2, int compType)
{
switch(compType)
- {
+ {
case 0:
return AreCellsEqual0(conn,connI,cell1,cell2);
case 1:
return AreCellsEqual3(conn,connI,cell1,cell2);
case 7:
return AreCellsEqual7(conn,connI,cell1,cell2);
- }
+ }
throw INTERP_KERNEL::Exception("Unknown comparison asked ! Must be in 0,1,2,3 or 7.");
}
else
return 0;
}
-
+
return work!=tmp+sz1?1:0;
}
else
}
void MEDCouplingUMesh::FindCommonCellsAlg(int compType, int startCellId, const DataArrayInt *nodal, const DataArrayInt *nodalI, const DataArrayInt *revNodal, const DataArrayInt *revNodalI,
- DataArrayInt *& commonCellsArr, DataArrayInt *& commonCellsIArr) throw(INTERP_KERNEL::Exception)
+ DataArrayInt *& commonCellsArr, DataArrayInt *& commonCellsIArr)
{
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> commonCells=DataArrayInt::New(),commonCellsI=DataArrayInt::New(); commonCells->alloc(0,1);
int nbOfCells=nodalI->getNumberOfTuples()-1;
* \warning This method modifies param \b otherDimM1OnSameCoords (for speed reasons).
*/
void MEDCouplingUMesh::findNodesToDuplicate(const MEDCouplingUMesh& otherDimM1OnSameCoords, DataArrayInt *& nodeIdsToDuplicate,
- DataArrayInt *& cellIdsNeededToBeRenum, DataArrayInt *& cellIdsNotModified) const throw(INTERP_KERNEL::Exception)
+ DataArrayInt *& cellIdsNeededToBeRenum, DataArrayInt *& cellIdsNotModified) const
{
checkFullyDefined();
otherDimM1OnSameCoords.checkFullyDefined();
*/
DataArrayInt *MEDCouplingUMesh::giveCellsWithType(INTERP_KERNEL::NormalizedCellType type) const
{
-
+
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
ret->alloc(0,1);
checkConnectivityFullyDefined();
* If 'deeCpy' is true all arrays (coordinates and connectivities) are deeply copied.
*/
MEDCouplingUMesh::MEDCouplingUMesh(const MEDCouplingUMesh& other, bool deepCopy):MEDCouplingPointSet(other,deepCopy),_mesh_dim(other._mesh_dim),
- _nodal_connec(0),_nodal_connec_index(0),
- _types(other._types)
+ _nodal_connec(0),_nodal_connec_index(0),
+ _types(other._types)
{
if(other._nodal_connec)
_nodal_connec=other._nodal_connec->performCpy(deepCopy);
*/
MEDCouplingFieldDouble *MEDCouplingUMesh::buildDirectionVectorField() const
{
- if(getMeshDimension()!=1)
+ if(getMeshDimension()!=1)
throw INTERP_KERNEL::Exception("Expected a umesh with meshDim == 1 for buildDirectionVectorField !");
- if(_types.size()!=1 || *(_types.begin())!=INTERP_KERNEL::NORM_SEG2)
- throw INTERP_KERNEL::Exception("Expected a umesh with only NORM_SEG2 type of elements for buildDirectionVectorField !");
- MEDCouplingAutoRefCountObjectPtr<MEDCouplingFieldDouble> ret=MEDCouplingFieldDouble::New(ON_CELLS,ONE_TIME);
- MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> array=DataArrayDouble::New();
- int nbOfCells=getNumberOfCells();
- int spaceDim=getSpaceDimension();
- array->alloc(nbOfCells,spaceDim);
- double *pt=array->getPointer();
- const double *coo=getCoords()->getConstPointer();
- std::vector<int> conn;
- conn.reserve(2);
- for(int i=0;i<nbOfCells;i++)
- {
- conn.resize(0);
- getNodeIdsOfCell(i,conn);
- pt=std::transform(coo+conn[1]*spaceDim,coo+(conn[1]+1)*spaceDim,coo+conn[0]*spaceDim,pt,std::minus<double>());
- }
- ret->setArray(array);
- ret->setMesh(this);
- ret->synchronizeTimeWithSupport();
- return ret.retn();
+ if(_types.size()!=1 || *(_types.begin())!=INTERP_KERNEL::NORM_SEG2)
+ throw INTERP_KERNEL::Exception("Expected a umesh with only NORM_SEG2 type of elements for buildDirectionVectorField !");
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingFieldDouble> ret=MEDCouplingFieldDouble::New(ON_CELLS,ONE_TIME);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> array=DataArrayDouble::New();
+ int nbOfCells=getNumberOfCells();
+ int spaceDim=getSpaceDimension();
+ array->alloc(nbOfCells,spaceDim);
+ double *pt=array->getPointer();
+ const double *coo=getCoords()->getConstPointer();
+ std::vector<int> conn;
+ conn.reserve(2);
+ for(int i=0;i<nbOfCells;i++)
+ {
+ conn.resize(0);
+ getNodeIdsOfCell(i,conn);
+ pt=std::transform(coo+conn[1]*spaceDim,coo+(conn[1]+1)*spaceDim,coo+conn[0]*spaceDim,pt,std::minus<double>());
+ }
+ ret->setArray(array);
+ ret->setMesh(this);
+ ret->synchronizeTimeWithSupport();
+ return ret.retn();
}
/*!
{
if(getMeshDimension()!=1)
throw INTERP_KERNEL::Exception("Expected a umesh with meshDim == 1 for project1D !");
- if(_types.size()!=1 || *(_types.begin())!=INTERP_KERNEL::NORM_SEG2)
- throw INTERP_KERNEL::Exception("Expected a umesh with only NORM_SEG2 type of elements for project1D !");
- if(getSpaceDimension()!=3)
- throw INTERP_KERNEL::Exception("Expected a umesh with spaceDim==3 for project1D !");
- MEDCouplingAutoRefCountObjectPtr<MEDCouplingFieldDouble> f=buildDirectionVectorField();
- const double *fPtr=f->getArray()->getConstPointer();
- double tmp[3];
- for(int i=0;i<getNumberOfCells();i++)
- {
- const double *tmp1=fPtr+3*i;
- tmp[0]=tmp1[1]*v[2]-tmp1[2]*v[1];
- tmp[1]=tmp1[2]*v[0]-tmp1[0]*v[2];
- tmp[2]=tmp1[0]*v[1]-tmp1[1]*v[0];
- double n1=INTERP_KERNEL::norm<3>(tmp);
- n1/=INTERP_KERNEL::norm<3>(tmp1);
- if(n1>eps)
- throw INTERP_KERNEL::Exception("UMesh::Projection 1D failed !");
- }
- const double *coo=getCoords()->getConstPointer();
- for(int i=0;i<getNumberOfNodes();i++)
- {
- std::transform(coo+i*3,coo+i*3+3,pt,tmp,std::minus<double>());
- std::transform(tmp,tmp+3,v,tmp,std::multiplies<double>());
- res[i]=std::accumulate(tmp,tmp+3,0.);
- }
+ if(_types.size()!=1 || *(_types.begin())!=INTERP_KERNEL::NORM_SEG2)
+ throw INTERP_KERNEL::Exception("Expected a umesh with only NORM_SEG2 type of elements for project1D !");
+ if(getSpaceDimension()!=3)
+ throw INTERP_KERNEL::Exception("Expected a umesh with spaceDim==3 for project1D !");
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingFieldDouble> f=buildDirectionVectorField();
+ const double *fPtr=f->getArray()->getConstPointer();
+ double tmp[3];
+ for(int i=0;i<getNumberOfCells();i++)
+ {
+ const double *tmp1=fPtr+3*i;
+ tmp[0]=tmp1[1]*v[2]-tmp1[2]*v[1];
+ tmp[1]=tmp1[2]*v[0]-tmp1[0]*v[2];
+ tmp[2]=tmp1[0]*v[1]-tmp1[1]*v[0];
+ double n1=INTERP_KERNEL::norm<3>(tmp);
+ n1/=INTERP_KERNEL::norm<3>(tmp1);
+ if(n1>eps)
+ throw INTERP_KERNEL::Exception("UMesh::Projection 1D failed !");
+ }
+ const double *coo=getCoords()->getConstPointer();
+ for(int i=0;i<getNumberOfNodes();i++)
+ {
+ std::transform(coo+i*3,coo+i*3+3,pt,tmp,std::minus<double>());
+ std::transform(tmp,tmp+3,v,tmp,std::multiplies<double>());
+ res[i]=std::accumulate(tmp,tmp+3,0.);
+ }
}
/*!
* \a this is expected to be a mesh so that its space dimension is equal to its
* mesh dimension + 1. Furthermore only mesh dimension 1 and 2 are supported for the moment.
* Distance from \a ptBg to \a ptEnd is expected to be equal to the space dimension. \a this is also expected to be fully defined (connectivity and coordinates).
-
+ *
* WARNING, if there is some orphan nodes in \a this (nodes not fetched by any cells in \a this ( see MEDCouplingUMesh::zipCoords ) ) these nodes will ** not ** been taken
* into account in this method. Only cells and nodes lying on them are considered in the algorithm (even if one of these orphan nodes is closer than returned distance).
* A user that needs to consider orphan nodes should invoke DataArrayDouble::minimalDistanceTo method on the coordinates array of \a this.
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> bboxArr(getBoundingBoxForBBTree());
const double *bbox(bboxArr->begin());
switch(spaceDim)
- {
+ {
case 3:
{
BBTreeDst<3> myTree(bbox,0,0,nbCells);
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::distanceToPoints : only spacedim 2 and 3 supported !");
- }
+ }
cellIds=ret1.retn();
return ret0.retn();
}
for(const int *zeCell=cellIdsBg;zeCell!=cellIdsEnd;zeCell++)
{
switch((INTERP_KERNEL::NormalizedCellType)nc[ncI[*zeCell]])
- {
+ {
case INTERP_KERNEL::NORM_TRI3:
{
double tmp=INTERP_KERNEL::DistanceFromPtToTriInSpaceDim3(pt,coords+3*nc[ncI[*zeCell]+1],coords+3*nc[ncI[*zeCell]+2],coords+3*nc[ncI[*zeCell]+3]);
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::distanceToPoint3DSurfAlg : not managed cell type ! Supporting TRI3, QUAD4 and POLYGON !");
- }
+ }
}
}
ret0=std::numeric_limits<double>::max();
for(const int *zeCell=cellIdsBg;zeCell!=cellIdsEnd;zeCell++)
{
- switch((INTERP_KERNEL::NormalizedCellType)nc[ncI[*zeCell]])
- {
+ switch((INTERP_KERNEL::NormalizedCellType)nc[ncI[*zeCell]])
+ {
case INTERP_KERNEL::NORM_SEG2:
{
std::size_t uselessEntry=0;
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::distanceToPoint2DCurveAlg : not managed cell type ! Supporting SEG2 !");
- }
+ }
}
}
INTERP_KERNEL::NormalizedCellType getTypeOfElement(int) const { return (INTERP_KERNEL::NormalizedCellType)0; }
// end
};
-
+
/*!
* Warning the nodes in \a m should be decrRefed ! To avoid that Node * pointer be replaced by another instance.
*/
INTERP_KERNEL::Node *n0(new INTERP_KERNEL::Node(coords2D[2*bg[0]],coords2D[2*bg[0]+1])),*n1(new INTERP_KERNEL::Node(coords2D[2*bg[1]],coords2D[2*bg[1]+1]));
m[n0]=bg[0]; m[n1]=bg[1];
switch(typ)
- {
+ {
case INTERP_KERNEL::NORM_SEG2:
{
ret=new INTERP_KERNEL::EdgeLin(n0,n1);
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMeshBuildQPFromEdge2 : Expecting a mesh with spaceDim==2 and meshDim==1 !");
- }
+ }
return ret;
}
{
INTERP_KERNEL::Edge *ret=0;
switch(typ)
- {
+ {
case INTERP_KERNEL::NORM_SEG2:
{
ret=new INTERP_KERNEL::EdgeLin(mapp2[bg[0]].first,mapp2[bg[1]].first);
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMeshBuildQPFromEdge : Expecting a mesh with spaceDim==2 and meshDim==1 !");
- }
+ }
return ret;
}
* 'mapp' returns a mapping between local numbering in submesh (represented by a Node*) and the global node numbering in 'mDesc'.
*/
INTERP_KERNEL::QuadraticPolygon *MEDCouplingUMeshBuildQPFromMesh(const MEDCouplingUMesh *mDesc, const std::vector<int>& candidates,
- std::map<INTERP_KERNEL::Node *,int>& mapp)
- throw(INTERP_KERNEL::Exception)
+ std::map<INTERP_KERNEL::Node *,int>& mapp)
{
mapp.clear();
std::map<int, std::pair<INTERP_KERNEL::Node *,bool> > mapp2;//bool is for a flag specifying if node is boundary (true) or only a middle for SEG3.
}
/*else if(mDim==2)
{
-
+
}*/
else
throw INTERP_KERNEL::Exception("For spaceDim==3 only meshDim==3 implemented for getelementscontainingpoints !");
int oldNbOfNodes=getNumberOfNodes();
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> newCoords;
switch(policy)
- {
+ {
case 0:
{
newCoords=fillExtCoordsUsingTranslation(mesh1D,isQuad);
}
default:
throw INTERP_KERNEL::Exception("Not implemented extrusion policy : must be in (0) !");
- }
+ }
setCoords(newCoords);
MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret=buildExtrudedMeshFromThisLowLev(oldNbOfNodes,isQuad);
updateTime();
double cosangle=i+1<nbOfLevsInVec?(p0r[0]-tmp3[0])*(p1r[0]-tmp3[0])+(p0r[1]-tmp3[1])*(p1r[1]-tmp3[1]):(p2r[0]-tmp3[0])*(p1r[0]-tmp3[0])+(p2r[1]-tmp3[1])*(p1r[1]-tmp3[1]);
double angle=acos(cosangle/(radius*radius));
tmp->rotate(end,vecPlane,angle);
-
}
retPtr=std::copy(tmp2->getConstPointer(),tmp2->getConstPointer()+tmp2->getNbOfElems(),retPtr);
}
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> coordsSafe;
int meshDim=getMeshDimension();
switch(conversionType)
- {
+ {
case 0:
switch(meshDim)
- {
+ {
case 1:
ret=convertLinearCellsToQuadratic1D0(conn,connI,coords,types);
connSafe=conn; connISafe=connI; coordsSafe=coords;
break;
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion of type 0 mesh dimensions available are [1,2,3] !");
- }
+ }
break;
- case 1:
- {
- switch(meshDim)
- {
case 1:
- ret=convertLinearCellsToQuadratic1D0(conn,connI,coords,types);//it is not a bug. In 1D policy 0 and 1 are equals
- connSafe=conn; connISafe=connI; coordsSafe=coords;
- break;
- case 2:
- ret=convertLinearCellsToQuadratic2D1(conn,connI,coords,types);
- connSafe=conn; connISafe=connI; coordsSafe=coords;
- break;
- case 3:
- ret=convertLinearCellsToQuadratic3D1(conn,connI,coords,types);
- connSafe=conn; connISafe=connI; coordsSafe=coords;
- break;
+ {
+ switch(meshDim)
+ {
+ case 1:
+ ret=convertLinearCellsToQuadratic1D0(conn,connI,coords,types);//it is not a bug. In 1D policy 0 and 1 are equals
+ connSafe=conn; connISafe=connI; coordsSafe=coords;
+ break;
+ case 2:
+ ret=convertLinearCellsToQuadratic2D1(conn,connI,coords,types);
+ connSafe=conn; connISafe=connI; coordsSafe=coords;
+ break;
+ case 3:
+ ret=convertLinearCellsToQuadratic3D1(conn,connI,coords,types);
+ connSafe=conn; connISafe=connI; coordsSafe=coords;
+ break;
+ default:
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion of type 1 mesh dimensions available are [1,2,3] !");
+ }
+ break;
+ }
default:
- throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion of type 1 mesh dimensions available are [1,2,3] !");
- }
- break;
- }
- default:
- throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion type available are 0 (default, the simplest) and 1 (the most complex) !");
- }
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion type available are 0 (default, the simplest) and 1 (the most complex) !");
+ }
setConnectivity(connSafe,connISafe,false);
_types=types;
setCoords(coordsSafe);
*/
DataArrayInt *MEDCouplingUMesh::convertLinearCellsToQuadratic2D0(DataArrayInt *&conn, DataArrayInt *&connI, DataArrayDouble *& coords, std::set<INTERP_KERNEL::NormalizedCellType>& types) const
{
-
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> desc(DataArrayInt::New()),descI(DataArrayInt::New()),tmp2(DataArrayInt::New()),tmp3(DataArrayInt::New());
MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> m1D=buildDescendingConnectivity(desc,descI,tmp2,tmp3); tmp2=0; tmp3=0;
return convertLinearCellsToQuadratic2DAnd3D0(m1D,desc,descI,conn,connI,coords,types);
DataArrayInt *MEDCouplingUMesh::simplexize(int policy)
{
switch(policy)
- {
+ {
case 0:
return simplexizePol0();
case 1:
return simplexizePol1();
case (int) INTERP_KERNEL::PLANAR_FACE_5:
- return simplexizePlanarFace5();
+ return simplexizePlanarFace5();
case (int) INTERP_KERNEL::PLANAR_FACE_6:
- return simplexizePlanarFace6();
+ return simplexizePlanarFace6();
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::simplexize : unrecognized policy ! Must be :\n - 0 or 1 (only available for meshdim=2) \n - PLANAR_FACE_5, PLANAR_FACE_6 (only for meshdim=3)");
- }
+ }
}
/*!
if((INTERP_KERNEL::NormalizedCellType)oldc[ci[0]]==INTERP_KERNEL::NORM_QUAD4)
{
const int tmp[8]={(int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+1],oldc[ci[0]+2],oldc[ci[0]+3],
- (int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+1],oldc[ci[0]+3],oldc[ci[0]+4]};
+ (int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+1],oldc[ci[0]+3],oldc[ci[0]+4]};
pt=std::copy(tmp,tmp+8,pt);
ptI[1]=ptI[0]+4;
ptI[2]=ptI[0]+8;
if((INTERP_KERNEL::NormalizedCellType)oldc[ci[0]]==INTERP_KERNEL::NORM_QUAD4)
{
const int tmp[8]={(int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+1],oldc[ci[0]+2],oldc[ci[0]+4],
- (int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+2],oldc[ci[0]+3],oldc[ci[0]+4]};
+ (int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+2],oldc[ci[0]+3],oldc[ci[0]+4]};
pt=std::copy(tmp,tmp+8,pt);
ptI[1]=ptI[0]+4;
ptI[2]=ptI[0]+8;
if(type==INTERP_KERNEL::NORM_POLYHED)
{
try
- {
+ {
if(!IsPolyhedronWellOriented(conn+connI[i]+1,conn+connI[i+1],coordsPtr))
TryToCorrectPolyhedronOrientation(conn+connI[i]+1,conn+connI[i+1],coordsPtr);
- }
+ }
catch(INTERP_KERNEL::Exception& e)
- {
+ {
std::ostringstream oss; oss << "Something wrong in polyhedron #" << i << " : " << e.what();
throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
+ }
}
}
updateTime();
{
INTERP_KERNEL::NormalizedCellType type=(INTERP_KERNEL::NormalizedCellType)conn[connI[i]];
switch(type)
- {
+ {
case INTERP_KERNEL::NORM_TETRA4:
{
if(!IsTetra4WellOriented(conn+connI[i]+1,conn+connI[i+1],coordsPtr))
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::orientCorrectly3DCells : Your mesh contains type of cell not supported yet ! send mail to anthony.geay@cea.fr to add it !");
- }
+ }
}
updateTime();
return ret.retn();
{
INTERP_KERNEL::NormalizedCellType t=(INTERP_KERNEL::NormalizedCellType)*conn;
switch(t)
- {
- case INTERP_KERNEL::NORM_TRI3:
- {
- FillInCompact3DMode(spaceDim,3,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::triEdgeRatio(tmp);
- break;
- }
- case INTERP_KERNEL::NORM_QUAD4:
- {
- FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::quadEdgeRatio(tmp);
- break;
- }
- case INTERP_KERNEL::NORM_TETRA4:
- {
- FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::tetraEdgeRatio(tmp);
- break;
- }
+ {
+ case INTERP_KERNEL::NORM_TRI3:
+ {
+ FillInCompact3DMode(spaceDim,3,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::triEdgeRatio(tmp);
+ break;
+ }
+ case INTERP_KERNEL::NORM_QUAD4:
+ {
+ FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::quadEdgeRatio(tmp);
+ break;
+ }
+ case INTERP_KERNEL::NORM_TETRA4:
+ {
+ FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::tetraEdgeRatio(tmp);
+ break;
+ }
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getEdgeRatioField : A cell with not manged type (NORM_TRI3, NORM_QUAD4 and NORM_TETRA4) has been detected !");
- }
+ }
conn+=connI[i+1]-connI[i];
}
ret->setName("EdgeRatio");
{
INTERP_KERNEL::NormalizedCellType t=(INTERP_KERNEL::NormalizedCellType)*conn;
switch(t)
- {
- case INTERP_KERNEL::NORM_TRI3:
- {
- FillInCompact3DMode(spaceDim,3,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::triAspectRatio(tmp);
- break;
- }
- case INTERP_KERNEL::NORM_QUAD4:
- {
- FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::quadAspectRatio(tmp);
- break;
- }
- case INTERP_KERNEL::NORM_TETRA4:
- {
- FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::tetraAspectRatio(tmp);
- break;
- }
+ {
+ case INTERP_KERNEL::NORM_TRI3:
+ {
+ FillInCompact3DMode(spaceDim,3,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::triAspectRatio(tmp);
+ break;
+ }
+ case INTERP_KERNEL::NORM_QUAD4:
+ {
+ FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::quadAspectRatio(tmp);
+ break;
+ }
+ case INTERP_KERNEL::NORM_TETRA4:
+ {
+ FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::tetraAspectRatio(tmp);
+ break;
+ }
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getAspectRatioField : A cell with not manged type (NORM_TRI3, NORM_QUAD4 and NORM_TETRA4) has been detected !");
- }
+ }
conn+=connI[i+1]-connI[i];
}
ret->setName("AspectRatio");
{
INTERP_KERNEL::NormalizedCellType t=(INTERP_KERNEL::NormalizedCellType)*conn;
switch(t)
- {
- case INTERP_KERNEL::NORM_QUAD4:
- {
- FillInCompact3DMode(3,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::quadWarp(tmp);
- break;
- }
+ {
+ case INTERP_KERNEL::NORM_QUAD4:
+ {
+ FillInCompact3DMode(3,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::quadWarp(tmp);
+ break;
+ }
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getWarpField : A cell with not manged type (NORM_QUAD4) has been detected !");
- }
+ }
conn+=connI[i+1]-connI[i];
}
ret->setName("Warp");
{
INTERP_KERNEL::NormalizedCellType t=(INTERP_KERNEL::NormalizedCellType)*conn;
switch(t)
- {
- case INTERP_KERNEL::NORM_QUAD4:
- {
- FillInCompact3DMode(3,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::quadSkew(tmp);
- break;
- }
+ {
+ case INTERP_KERNEL::NORM_QUAD4:
+ {
+ FillInCompact3DMode(3,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::quadSkew(tmp);
+ break;
+ }
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getSkewField : A cell with not manged type (NORM_QUAD4) has been detected !");
- }
+ }
conn+=connI[i+1]-connI[i];
}
ret->setName("Skew");
MEDCoupling1GTUMesh *MEDCouplingUMesh::convertIntoSingleGeoTypeMesh() const
{
checkConnectivityFullyDefined();
- if(_types.size()!=1)
+ if(_types.size()!=1)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertIntoSingleGeoTypeMesh : current mesh does not contain exactly one geometric type !");
INTERP_KERNEL::NormalizedCellType typ=*_types.begin();
MEDCouplingAutoRefCountObjectPtr<MEDCoupling1GTUMesh> ret=MEDCoupling1GTUMesh::New(getName(),typ);
DataArrayInt *MEDCouplingUMesh::convertNodalConnectivityToStaticGeoTypeMesh() const
{
checkConnectivityFullyDefined();
- if(_types.size()!=1)
+ if(_types.size()!=1)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertNodalConnectivityToStaticGeoTypeMesh : current mesh does not contain exactly one geometric type !");
INTERP_KERNEL::NormalizedCellType typ=*_types.begin();
const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel(typ);
*/
MEDCouplingUMesh *MEDCouplingUMesh::AggregateSortedByTypeMeshesOnSameCoords(const std::vector<const MEDCouplingUMesh *>& ms,
DataArrayInt *&szOfCellGrpOfSameType,
- DataArrayInt *&idInMsOfCellGrpOfSameType) throw(INTERP_KERNEL::Exception)
+ DataArrayInt *&idInMsOfCellGrpOfSameType)
{
std::vector<const MEDCouplingUMesh *> ms2;
for(std::vector<const MEDCouplingUMesh *>::const_iterator it=ms.begin();it!=ms.end();it++)
* \throw If the coordinates array is not set in none of the meshes.
* \throw If \a a[ *i* ]->getMeshDimension() < 0.
* \throw If the meshes in \a a are of different dimension (getMeshDimension()).
-*/
+ */
MEDCouplingUMesh *MEDCouplingUMesh::MergeUMeshes(std::vector<const MEDCouplingUMesh *>& a)
{
std::size_t sz=a.size();
ret.push_back(cm.getExtrudedType());
int deltaz=isQuad?2*nbOfNodesPerLev:nbOfNodesPerLev;
switch(flatType)
- {
+ {
case INTERP_KERNEL::NORM_POINT1:
{
ret.push_back(connBg[1]);
case INTERP_KERNEL::NORM_TRI6:
{
int conn[15]={connBg[1],connBg[2],connBg[3],connBg[1]+deltaz,connBg[2]+deltaz,connBg[3]+deltaz,connBg[4],connBg[5],connBg[6],connBg[4]+deltaz,connBg[5]+deltaz,connBg[6]+deltaz,
- connBg[1]+nbOfNodesPerLev,connBg[2]+nbOfNodesPerLev,connBg[3]+nbOfNodesPerLev};
+ connBg[1]+nbOfNodesPerLev,connBg[2]+nbOfNodesPerLev,connBg[3]+nbOfNodesPerLev};
ret.insert(ret.end(),conn,conn+15);
break;
}
}
default:
throw INTERP_KERNEL::Exception("A flat type has been detected that has not its extruded representation !");
- }
+ }
}
/*!
INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
IntersectDescending2DMeshes(m1,m2,eps,intersectEdge1,colinear2, subDiv2,
- m1Desc,desc1,descIndx1,revDesc1,revDescIndx1,
+ m1Desc,desc1,descIndx1,revDesc1,revDescIndx1,
addCoo, m2Desc,desc2,descIndx2,revDesc2,revDescIndx2);
revDesc1->decrRef(); revDescIndx1->decrRef(); revDesc2->decrRef(); revDescIndx2->decrRef();
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> dd1(desc1),dd2(descIndx1),dd3(desc2),dd4(descIndx2);
MEDCouplingUMeshBuildQPFromMesh3(coo1,offset1,coo2,offset2,addCoords,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,/* output */mapp,mappRev);
// pol1 is the full cell from mesh2, in QP format, with all the additional intersecting nodes.
pol1.buildFromCrudeDataArray(mappRev,cm.isQuadratic(),conn1+connI1[i]+1,coo1,
- desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1);
+ desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1);
//
std::set<INTERP_KERNEL::Edge *> edges1;// store all edges of pol1 that are NOT consumed by intersect cells. If any after iteration over candidates2 -> a part of pol1 should appear in result
std::set<INTERP_KERNEL::Edge *> edgesBoundary2;// store all edges that are on boundary of (pol2 intersect pol1) minus edges on pol1.
MEDCouplingUMeshBuildQPFromMesh3(coo1,offset1,coo2,offset2,addCoords,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,/* output */mapp,mappRev);
// pol2 is the new QP in the final merged result.
pol2s[ii].buildFromCrudeDataArray2(mappRev,cm2.isQuadratic(),conn2+connI2[*it2]+1,coo2,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,
- pol1,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,colinear2, /* output */ edgesIn2ForShare);
+ pol1,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,colinear2, /* output */ edgesIn2ForShare);
}
ii=0;
for(std::vector<int>::const_iterator it2=candidates2.begin();it2!=candidates2.end();it2++,ii++)
if(!edges1.empty())
{
try
- {
+ {
INTERP_KERNEL::QuadraticPolygon::ComputeResidual(pol1,edges1,edgesBoundary2,mapp,offset3,i,addCoordsQuadratic,cr,crI,cNb1,cNb2);
- }
+ }
catch(INTERP_KERNEL::Exception& e)
- {
+ {
std::ostringstream oss; oss << "Error when computing residual of cell #" << i << " in source/m1 mesh ! Maybe the neighbours of this cell in mesh are not well connected !\n" << "The deep reason is the following : " << e.what();
throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
+ }
}
for(std::map<int,INTERP_KERNEL::Node *>::const_iterator it=mappRev.begin();it!=mappRev.end();it++)
(*it).second->decrRef();
{
std::map<INTERP_KERNEL::Node *,int> m;
INTERP_KERNEL::Edge *e1(MEDCouplingUMeshBuildQPFromEdge2((INTERP_KERNEL::NormalizedCellType)c[ci[i]],c+ci[i]+1,coords,m)),
- *e2(MEDCouplingUMeshBuildQPFromEdge2((INTERP_KERNEL::NormalizedCellType)c[ci[*it]],c+ci[*it]+1,coords,m));
+ *e2(MEDCouplingUMeshBuildQPFromEdge2((INTERP_KERNEL::NormalizedCellType)c[ci[*it]],c+ci[*it]+1,coords,m));
INTERP_KERNEL::MergePoints merge;
INTERP_KERNEL::QuadraticPolygon c1,c2;
e1->intersectWith(e2,merge,c1,c2);
MEDCouplingUMesh *& m1Desc, DataArrayInt *&desc1, DataArrayInt *&descIndx1, DataArrayInt *&revDesc1, DataArrayInt *&revDescIndx1,
std::vector<double>& addCoo,
MEDCouplingUMesh *& m2Desc, DataArrayInt *&desc2, DataArrayInt *&descIndx2, DataArrayInt *&revDesc2, DataArrayInt *&revDescIndx2)
- throw(INTERP_KERNEL::Exception)
{
static const int SPACEDIM=2;
// Build desc connectivity
* \param[out] intersectEdge the same content as subDiv, but correclty oriented.
*/
void MEDCouplingUMesh::BuildIntersectEdges(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2,
- const std::vector<double>& addCoo,
- const std::vector< std::vector<int> >& subDiv, std::vector< std::vector<int> >& intersectEdge)
+ const std::vector<double>& addCoo,
+ const std::vector< std::vector<int> >& subDiv, std::vector< std::vector<int> >& intersectEdge)
{
int offset1=m1->getNumberOfNodes();
int ncell=m2->getNumberOfCells();
void MEDCouplingUMesh::AssemblyForSplitFrom3DCurve(const std::vector<int>& cut3DCurve, std::vector<int>& nodesOnPlane, const int *nodal3DSurf, const int *nodalIndx3DSurf,
const int *nodal3DCurve, const int *nodalIndx3DCurve,
const int *desc, const int *descIndx,
- std::vector< std::pair<int,int> >& cut3DSurf) throw(INTERP_KERNEL::Exception)
+ std::vector< std::pair<int,int> >& cut3DSurf)
{
std::set<int> nodesOnP(nodesOnPlane.begin(),nodesOnPlane.end());
int nbOf3DSurfCell=(int)cut3DSurf.size();
}
}
switch(res.size())
- {
+ {
case 2:
{
cut3DSurf[i].first=res[0]; cut3DSurf[i].second=res[1];
else
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::AssemblyPointsFrom3DCurve : unexpected situation !");
}
- }
+ }
}
}
*/
void MEDCouplingUMesh::assemblyForSplitFrom3DSurf(const std::vector< std::pair<int,int> >& cut3DSurf,
const int *desc, const int *descIndx,
- DataArrayInt *nodalRes, DataArrayInt *nodalResIndx, DataArrayInt *cellIds) const throw(INTERP_KERNEL::Exception)
+ DataArrayInt *nodalRes, DataArrayInt *nodalResIndx, DataArrayInt *cellIds) const
{
checkFullyDefined();
if(getMeshDimension()!=3 || getSpaceDimension()!=3)
* \sa MEDCouplingUMesh::ExtractFromIndexedArrays2
*/
void MEDCouplingUMesh::ExtractFromIndexedArrays(const int *idsOfSelectBg, const int *idsOfSelectEnd, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception)
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut)
{
if(!arrIn || !arrIndxIn)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::ExtractFromIndexedArrays : input pointer is NULL !");
* \sa MEDCouplingUMesh::ExtractFromIndexedArrays
*/
void MEDCouplingUMesh::ExtractFromIndexedArrays2(int idsOfSelectStart, int idsOfSelectStop, int idsOfSelectStep, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception)
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut)
{
if(!arrIn || !arrIndxIn)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::ExtractFromIndexedArrays2 : input pointer is NULL !");
*/
void MEDCouplingUMesh::SetPartOfIndexedArrays(const int *idsOfSelectBg, const int *idsOfSelectEnd, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception)
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut)
{
if(arrIn==0 || arrIndxIn==0 || srcArr==0 || srcArrIndex==0)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::SetPartOfIndexedArrays : presence of null pointer in input parameter !");
* \sa MEDCouplingUMesh::SetPartOfIndexedArrays
*/
void MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx(const int *idsOfSelectBg, const int *idsOfSelectEnd, DataArrayInt *arrInOut, const DataArrayInt *arrIndxIn,
- const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex) throw(INTERP_KERNEL::Exception)
+ const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex)
{
if(arrInOut==0 || arrIndxIn==0 || srcArr==0 || srcArrIndex==0)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx : presence of null pointer in input parameter !");
*/
void MEDCouplingUMesh::SetPartOfIndexedArrays2(int start, int end, int step, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception)
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut)
{
if(arrIn==0 || arrIndxIn==0 || srcArr==0 || srcArrIndex==0)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::SetPartOfIndexedArrays2 : presence of null pointer in input parameter !");
* \sa MEDCouplingUMesh::SetPartOfIndexedArrays2 MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx
*/
void MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx2(int start, int end, int step, DataArrayInt *arrInOut, const DataArrayInt *arrIndxIn,
- const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex) throw(INTERP_KERNEL::Exception)
+ const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex)
{
if(arrInOut==0 || arrIndxIn==0 || srcArr==0 || srcArrIndex==0)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx2 : presence of null pointer in input parameter !");
MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> tmp=static_cast<MEDCouplingUMesh *>(buildPartOfMySelf((*it)->begin(),(*it)->end(),true));
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> cell;
switch(mdim)
- {
+ {
case 2:
cell=tmp->buildUnionOf2DMesh();
break;
break;
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildSpreadZonesWithPoly : meshdimension supported are [2,3] ! Not implemented yet for others !");
- }
-
+ }
+
ret->insertNextCell((INTERP_KERNEL::NormalizedCellType)cell->getIJSafe(0,0),cell->getNumberOfTuples()-1,cell->getConstPointer()+1);
}
//
}
MEDCouplingUMeshCellIterator::MEDCouplingUMeshCellIterator(MEDCouplingUMesh *mesh):_mesh(mesh),_cell(new MEDCouplingUMeshCell(mesh)),
- _own_cell(true),_cell_id(-1),_nb_cell(0)
+ _own_cell(true),_cell_id(-1),_nb_cell(0)
{
if(mesh)
{
}
MEDCouplingUMeshCellIterator::MEDCouplingUMeshCellIterator(MEDCouplingUMesh *mesh, MEDCouplingUMeshCell *itc, int bg, int end):_mesh(mesh),_cell(itc),
- _own_cell(false),_cell_id(bg-1),
- _nb_cell(end)
+ _own_cell(false),_cell_id(bg-1),
+ _nb_cell(end)
{
if(mesh)
mesh->incrRef();
}
MEDCouplingUMeshCellEntry::MEDCouplingUMeshCellEntry(MEDCouplingUMesh *mesh, INTERP_KERNEL::NormalizedCellType type, MEDCouplingUMeshCell *itc, int bg, int end):_mesh(mesh),_type(type),
- _itc(itc),
- _bg(bg),_end(end)
+ _itc(itc),
+ _bg(bg),_end(end)
{
if(_mesh)
_mesh->incrRef();
MEDCOUPLING_EXPORT MEDCouplingUMesh *buildDescendingConnectivity2(DataArrayInt *desc, DataArrayInt *descIndx, DataArrayInt *revDesc, DataArrayInt *revDescIndx) const;
MEDCOUPLING_EXPORT void computeNeighborsOfCells(DataArrayInt *&neighbors, DataArrayInt *&neighborsIdx) const;
MEDCOUPLING_EXPORT static void ComputeNeighborsOfCellsAdv(const DataArrayInt *desc, const DataArrayInt *descI, const DataArrayInt *revDesc, const DataArrayInt *revDescI,
- DataArrayInt *&neighbors, DataArrayInt *&neighborsIdx) throw(INTERP_KERNEL::Exception);
+ DataArrayInt *&neighbors, DataArrayInt *&neighborsIdx);
MEDCOUPLING_EXPORT MEDCouplingPointSet *mergeMyselfWithOnSameCoords(const MEDCouplingPointSet *other) const;
MEDCOUPLING_EXPORT MEDCouplingPointSet *buildPartOfMySelf(const int *begin, const int *end, bool keepCoords=true) const;
MEDCOUPLING_EXPORT MEDCouplingPointSet *buildPartOfMySelf2(int start, int end, int step, bool keepCoords=true) const;
MEDCOUPLING_EXPORT void findCellIdsLyingOn(const MEDCouplingUMesh& otherDimM1OnSameCoords, DataArrayInt *&cellIdsRk0, DataArrayInt *&cellIdsRk1) const;
MEDCOUPLING_EXPORT MEDCouplingUMesh *computeSkin() const;
MEDCOUPLING_EXPORT void findNodesToDuplicate(const MEDCouplingUMesh& otherDimM1OnSameCoords, DataArrayInt *& nodeIdsToDuplicate,
- DataArrayInt *& cellIdsNeededToBeRenum, DataArrayInt *& cellIdsNotModified) const throw(INTERP_KERNEL::Exception);
+ DataArrayInt *& cellIdsNeededToBeRenum, DataArrayInt *& cellIdsNotModified) const;
MEDCOUPLING_EXPORT void duplicateNodes(const int *nodeIdsToDuplicateBg, const int *nodeIdsToDuplicateEnd);
MEDCOUPLING_EXPORT void renumberNodesInConn(const int *newNodeNumbersO2N);
MEDCOUPLING_EXPORT void shiftNodeNumbersInConn(int delta);
MEDCOUPLING_EXPORT void convertNodalConnectivityToDynamicGeoTypeMesh(DataArrayInt *&nodalConn, DataArrayInt *&nodalConnIndex) const;
MEDCOUPLING_EXPORT static MEDCouplingUMesh *AggregateSortedByTypeMeshesOnSameCoords(const std::vector<const MEDCouplingUMesh *>& ms,
DataArrayInt *&szOfCellGrpOfSameType,
- DataArrayInt *&idInMsOfCellGrpOfSameType) throw(INTERP_KERNEL::Exception);
+ DataArrayInt *&idInMsOfCellGrpOfSameType);
MEDCOUPLING_EXPORT DataArrayInt *keepCellIdsByType(INTERP_KERNEL::NormalizedCellType type, const int *begin, const int *end) const;
MEDCOUPLING_EXPORT DataArrayInt *convertCellArrayPerGeoType(const DataArrayInt *da) const;
MEDCOUPLING_EXPORT MEDCouplingUMesh *keepSpecifiedCells(INTERP_KERNEL::NormalizedCellType type, const int *idsPerGeoTypeBg, const int *idsPerGeoTypeEnd) const;
MEDCOUPLING_EXPORT static bool BuildConvexEnvelopOf2DCellJarvis(const double *coords, const int *nodalConnBg, const int *nodalConnEnd, DataArrayInt *nodalConnecOut);
MEDCOUPLING_EXPORT static bool RemoveIdsFromIndexedArrays(const int *idsToRemoveBg, const int *idsToRemoveEnd, DataArrayInt *arr, DataArrayInt *arrIndx, int offsetForRemoval=0);
MEDCOUPLING_EXPORT static void ExtractFromIndexedArrays(const int *idsOfSelectBg, const int *idsOfSelectEnd, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception);
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut);
MEDCOUPLING_EXPORT static void ExtractFromIndexedArrays2(int idsOfSelectStart, int idsOfSelectStop, int idsOfSelectStep, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception);
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut);
MEDCOUPLING_EXPORT static void SetPartOfIndexedArrays(const int *idsOfSelectBg, const int *idsOfSelectEnd, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception);
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut);
MEDCOUPLING_EXPORT static void SetPartOfIndexedArraysSameIdx(const int *idsOfSelectBg, const int *idsOfSelectEnd, DataArrayInt *arrInOut, const DataArrayInt *arrIndxIn,
- const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex) throw(INTERP_KERNEL::Exception);
+ const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex);
MEDCOUPLING_EXPORT static void SetPartOfIndexedArrays2(int start, int end, int step, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception);
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut);
MEDCOUPLING_EXPORT static void SetPartOfIndexedArraysSameIdx2(int start, int end, int step, DataArrayInt *arrInOut, const DataArrayInt *arrIndxIn,
- const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex) throw(INTERP_KERNEL::Exception);
+ const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex);
MEDCOUPLING_EXPORT static DataArrayInt *ComputeSpreadZoneGradually(const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn);
MEDCOUPLING_EXPORT static DataArrayInt *ComputeSpreadZoneGraduallyFromSeed(const int *seedBg, const int *seedEnd, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn, int nbOfDepthPeeling, int& nbOfDepthPeelingPerformed);
MEDCOUPLING_EXPORT static void FindCommonCellsAlg(int compType, int startCellId, const DataArrayInt *nodal, const DataArrayInt *nodalI, const DataArrayInt *revNodal, const DataArrayInt *revNodalI,
- DataArrayInt *& commonCellsArr, DataArrayInt *& commonCellsIArr) throw(INTERP_KERNEL::Exception);
+ DataArrayInt *& commonCellsArr, DataArrayInt *& commonCellsIArr);
MEDCOUPLING_EXPORT DataArrayInt *buildUnionOf2DMesh() const;
MEDCOUPLING_EXPORT DataArrayInt *buildUnionOf3DMesh() const;
private:
std::vector< std::vector<int> >& intersectEdge1, std::vector< std::vector<int> >& colinear2, std::vector< std::vector<int> >& subDiv2,
MEDCouplingUMesh *& m1Desc, DataArrayInt *&desc1, DataArrayInt *&descIndx1, DataArrayInt *&revDesc1, DataArrayInt *&revDescIndx1,
std::vector<double>& addCoo,
- MEDCouplingUMesh *& m2Desc, DataArrayInt *&desc2, DataArrayInt *&descIndx2, DataArrayInt *&revDesc2, DataArrayInt *&revDescIndx2)
- throw(INTERP_KERNEL::Exception);
+ MEDCouplingUMesh *& m2Desc, DataArrayInt *&desc2, DataArrayInt *&descIndx2, DataArrayInt *&revDesc2, DataArrayInt *&revDescIndx2);
static void BuildIntersectEdges(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, const std::vector<double>& addCoo, const std::vector< std::vector<int> >& subDiv, std::vector< std::vector<int> >& intersectEdge);
static void BuildIntersecting2DCellsFromEdges(double eps, const MEDCouplingUMesh *m1, const int *desc1, const int *descIndx1, const std::vector<std::vector<int> >& intesctEdges1, const std::vector< std::vector<int> >& colinear2,
const MEDCouplingUMesh *m2, const int *desc2, const int *descIndx2, const std::vector<std::vector<int> >& intesctEdges2,
std::vector<double>& addCoordsQuadratic, std::vector<int>& cr, std::vector<int>& crI, std::vector<int>& cNb1, std::vector<int>& cNb2);
static void AssemblyForSplitFrom3DCurve(const std::vector<int>& cut3DCurve, std::vector<int>& nodesOnPlane, const int *nodal3DSurf, const int *nodalIndx3DSurf,
const int *nodal3DCurve, const int *nodalIndx3DCurve,
- const int *desc, const int *descIndx, std::vector< std::pair<int,int> >& cut3DSurf) throw(INTERP_KERNEL::Exception);
+ const int *desc, const int *descIndx, std::vector< std::pair<int,int> >& cut3DSurf);
void assemblyForSplitFrom3DSurf(const std::vector< std::pair<int,int> >& cut3DSurf,
- const int *desc, const int *descIndx, DataArrayInt *nodalRes, DataArrayInt *nodalResIndx, DataArrayInt *cellIds) const throw(INTERP_KERNEL::Exception);
+ const int *desc, const int *descIndx, DataArrayInt *nodalRes, DataArrayInt *nodalResIndx, DataArrayInt *cellIds) const;
void split2DCellsLinear(const DataArrayInt *desc, const DataArrayInt *descI, const DataArrayInt *subNodesInSeg, const DataArrayInt *subNodesInSegI);
int split2DCellsQuadratic(const DataArrayInt *desc, const DataArrayInt *descI, const DataArrayInt *subNodesInSeg, const DataArrayInt *subNodesInSegI, const DataArrayInt *mid, const DataArrayInt *midI);
static bool Colinearize2DCell(const double *coords, const int *connBg, const int *connEnd, int offset, DataArrayInt *newConnOfCell, DataArrayDouble *appendedCoords);
