Task 3.2. Concealment into multi-level Compounds

Update behavior of SPLIT operation to keep hierarchy of compounds.

diff --git a/src/FeaturesAPI/FeaturesAPI_BooleanFill.cpp b/src/FeaturesAPI/FeaturesAPI_BooleanFill.cpp
index 2a832ec6fd7dda38942b1cb41fc8ecc9ee308154..511a7f56da102587497eda25cb1921698a5286d2 100644 (file)
--- a/src/FeaturesAPI/FeaturesAPI_BooleanFill.cpp
+++ b/src/FeaturesAPI/FeaturesAPI_BooleanFill.cpp
@@ -35,10 +35,12 @@ FeaturesAPI_BooleanFill::FeaturesAPI_BooleanFill(
 FeaturesAPI_BooleanFill::FeaturesAPI_BooleanFill(
   const std::shared_ptr<ModelAPI_Feature>& theFeature,
   const std::list<ModelHighAPI_Selection>& theMainObjects,
-  const std::list<ModelHighAPI_Selection>& theToolObjects)
+  const std::list<ModelHighAPI_Selection>& theToolObjects,
+  const int theVersion)
 : ModelHighAPI_Interface(theFeature)
 {
   if(initialize()) {
+    fillAttribute(theVersion, theFeature->integer(FeaturesPlugin_Boolean::VERSION_ID()));
     fillAttribute(theMainObjects, mymainObjects);
     fillAttribute(theToolObjects, mytoolObjects);
 
@@ -82,17 +84,26 @@ void FeaturesAPI_BooleanFill::dump(ModelHighAPI_Dumper& theDumper) const
     aBase->selectionList(FeaturesPlugin_BooleanFill::OBJECT_LIST_ID());
   AttributeSelectionListPtr aTools =
     aBase->selectionList(FeaturesPlugin_BooleanFill::TOOL_LIST_ID());
+  AttributeIntegerPtr aVersion =
+    aBase->integer(FeaturesPlugin_BooleanFill::VERSION_ID());
+
+  theDumper << "(" << aDocName << ", " << anObjects << ", " << aTools;
+
+  if (aVersion && aVersion->isInitialized())
+    theDumper << ", " << aVersion->value();
 
-  theDumper << "(" << aDocName << ", " << anObjects << ", " << aTools << ")" << std::endl;
+  theDumper << ")" << std::endl;
 }
 
 //==================================================================================================
 BooleanFillPtr addSplit(const std::shared_ptr<ModelAPI_Document>& thePart,
                         const std::list<ModelHighAPI_Selection>& theMainObjects,
-                        const std::list<ModelHighAPI_Selection>& theToolObjects)
+                        const std::list<ModelHighAPI_Selection>& theToolObjects,
+                        const int theVersion)
 {
   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_BooleanFill::ID());
   return BooleanFillPtr(new FeaturesAPI_BooleanFill(aFeature,
                                                     theMainObjects,
-                                                    theToolObjects));
+                                                    theToolObjects,
+                                                    theVersion));
 }

diff --git a/src/FeaturesAPI/FeaturesAPI_BooleanFill.h b/src/FeaturesAPI/FeaturesAPI_BooleanFill.h
index 75f075a2e3a637c73b591e12e41dceae121a2258..2826fe9e863a34eeb65f5319c6ed43b3c81bda3d 100644 (file)
--- a/src/FeaturesAPI/FeaturesAPI_BooleanFill.h
+++ b/src/FeaturesAPI/FeaturesAPI_BooleanFill.h
@@ -44,7 +44,8 @@ public:
   FEATURESAPI_EXPORT
   FeaturesAPI_BooleanFill(const std::shared_ptr<ModelAPI_Feature>& theFeature,
                           const std::list<ModelHighAPI_Selection>& theMainObjects,
-                          const std::list<ModelHighAPI_Selection>& theToolObjects);
+                          const std::list<ModelHighAPI_Selection>& theToolObjects,
+                          const int theVersion = 0);
 
   /// Destructor.
   FEATURESAPI_EXPORT
@@ -77,6 +78,7 @@ typedef std::shared_ptr<FeaturesAPI_BooleanFill> BooleanFillPtr;
 FEATURESAPI_EXPORT
 BooleanFillPtr addSplit(const std::shared_ptr<ModelAPI_Document>& thePart,
                         const std::list<ModelHighAPI_Selection>& theMainObjects,
-                        const std::list<ModelHighAPI_Selection>& theToolObjects);
+                        const std::list<ModelHighAPI_Selection>& theToolObjects,
+                        const int theVersion = 0);
 
 #endif // FeaturesAPI_BooleanFill_H_

diff --git a/src/FeaturesPlugin/CMakeLists.txt b/src/FeaturesPlugin/CMakeLists.txt
index ac313d386e877b63242662f88e41f19efa5d17ba..d70e298ea1f53ae56ffbf3b8e675937ea295b775 100644 (file)
--- a/src/FeaturesPlugin/CMakeLists.txt
+++ b/src/FeaturesPlugin/CMakeLists.txt
@@ -480,6 +480,9 @@ ADD_UNIT_TESTS(TestExtrusion.py
                TestBooleanSmash_MultiLevelCompound_v0_2.py
                TestBooleanSmash_MultiLevelCompound_v20190506_1.py
                TestBooleanSmash_MultiLevelCompound_v20190506_2.py
-               TestBooleanSplit_MultiLevelCompound0.py
+               TestBooleanSplit_MultiLevelCompound_v0_1.py
+               TestBooleanSplit_MultiLevelCompound_v0_2.py
+               TestBooleanSplit_MultiLevelCompound_v20190506_1.py
+               TestBooleanSplit_MultiLevelCompound_v20190506_2.py
                TestPartition_MultiLevelCompound0.py
 )

diff --git a/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.cpp b/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.cpp
index a907823addc16bb4173a6e1982dfd4722f82f9e4..94630430f3a50a4ad73daea8aabe68b0958d63ec 100644 (file)
--- a/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.cpp
+++ b/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.cpp
@@ -40,12 +40,21 @@
 #include <algorithm>
 #include <map>
 
+static const int THE_SPLIT_VERSION_1 = 20190506;
+
 //=================================================================================================
 FeaturesPlugin_BooleanFill::FeaturesPlugin_BooleanFill()
   : FeaturesPlugin_Boolean(FeaturesPlugin_Boolean::BOOL_FILL)
 {
 }
 
+//==================================================================================================
+void FeaturesPlugin_BooleanFill::initAttributes()
+{
+  FeaturesPlugin_Boolean::initAttributes();
+  initVersion(THE_SPLIT_VERSION_1);
+}
+
 //=================================================================================================
 void FeaturesPlugin_BooleanFill::execute()
 {
@@ -71,9 +80,21 @@ void FeaturesPlugin_BooleanFill::execute()
     return;
   }
 
+  // version of Split feature
+  int aSplitVersion = version();
+
   std::vector<FeaturesPlugin_Tools::ResultBaseAlgo> aResultBaseAlgoList;
   ListOfShape aResultShapesList;
 
+  std::shared_ptr<GeomAlgoAPI_MakeShapeList> aMakeShapeList(new GeomAlgoAPI_MakeShapeList());
+
+  GeomShapePtr aResultCompound;
+  if (aSplitVersion == THE_SPLIT_VERSION_1) {
+    // merge hierarchies of compounds containing objects and tools
+    aResultCompound =
+        keepUnusedSubsOfCompound(GeomShapePtr(), anObjects, aTools, aMakeShapeList);
+  }
+
   // For solids cut each object with all tools.
   bool isOk = true;
   for (ObjectHierarchy::Iterator anObjectsIt = anObjects.Begin();
@@ -88,21 +109,52 @@ void FeaturesPlugin_BooleanFill::execute()
       // compsolid handling
       isOk = processCompsolid(GeomAlgoAPI_Tools::BOOL_PARTITION,
                               anObjects, aParent, aTools.Objects(), aPlanes,
-                              aResultIndex, aResultBaseAlgoList, aResultShapesList);
+                              aResultIndex, aResultBaseAlgoList, aResultShapesList,
+                              aResultCompound);
     } else {
       // process object as is
       isOk = processObject(GeomAlgoAPI_Tools::BOOL_PARTITION,
                            anObject, aTools.Objects(), aPlanes,
-                           aResultIndex, aResultBaseAlgoList, aResultShapesList);
+                           aResultIndex, aResultBaseAlgoList, aResultShapesList,
+                           aResultCompound);
+    }
+  }
+
+  GeomAPI_ShapeIterator aShapeIt(aResultCompound);
+  if (aShapeIt.more()) {
+    std::shared_ptr<ModelAPI_ResultBody> aResultBody =
+        document()->createBody(data(), aResultIndex);
+
+    ListOfShape anObjectList = anObjects.Objects();
+    ListOfShape aToolsList = aTools.Objects();
+    FeaturesPlugin_Tools::loadModifiedShapes(aResultBody,
+                                             anObjectList,
+                                             aToolsList,
+                                             aMakeShapeList,
+                                             aResultCompound);
+    setResult(aResultBody, aResultIndex++);
+
+    // merge algorithms
+    FeaturesPlugin_Tools::ResultBaseAlgo aRBA;
+    aRBA.resultBody = aResultBody;
+    aRBA.baseShape = anObjectList.front();
+    for (std::vector<FeaturesPlugin_Tools::ResultBaseAlgo>::iterator
+         aRBAIt = aResultBaseAlgoList.begin();
+         aRBAIt != aResultBaseAlgoList.end(); ++aRBAIt) {
+      aMakeShapeList->appendAlgo(aRBAIt->makeShape);
     }
+    aRBA.makeShape = aMakeShapeList;
+    aResultBaseAlgoList.clear();
+    aResultBaseAlgoList.push_back(aRBA);
   }
 
   // Store deleted shapes after all results has been proceeded. This is to avoid issue when in one
   // result shape has been deleted, but in another it was modified or stayed.
-  GeomShapePtr aResultShapesCompound = GeomAlgoAPI_CompoundBuilder::compound(aResultShapesList);
+  if (!aResultCompound)
+    aResultCompound = GeomAlgoAPI_CompoundBuilder::compound(aResultShapesList);
   FeaturesPlugin_Tools::loadDeletedShapes(aResultBaseAlgoList,
                                           aTools.Objects(),
-                                          aResultShapesCompound);
+                                          aResultCompound);
 
   // remove the rest results if there were produced in the previous pass
   removeResults(aResultIndex);

diff --git a/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.h b/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.h
index 8e26cfa984e026d9befa78949c7d4dbe2dc5b527..386cb6ec6fb88c0dd9917c042da2b4c8590b03de 100644 (file)
--- a/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.h
+++ b/src/FeaturesPlugin/FeaturesPlugin_BooleanFill.h
@@ -43,6 +43,9 @@ public:
     return MY_KIND;
   }
 
+  /// Request for initialization of data model of the feature: adding all attributes.
+  FEATURESPLUGIN_EXPORT virtual void initAttributes();
+
   /// Creates a new part document if needed.
   FEATURESPLUGIN_EXPORT virtual void execute();
 

diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound0.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound0.py
deleted file mode 100644 (file)
index b621810..0000000
--- a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound0.py
+++ /dev/null
@@ -1,92 +0,0 @@
-# Copyright (C) 2014-2019  CEA/DEN, EDF R&D
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20)
-LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2)
-LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2)
-LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0)
-LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0)
-LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255)
-LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255)
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0)
-SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5)
-SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5)
-SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
-SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
-SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
-SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
-SketchLine_5 = SketchProjection_1.createdFeature()
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True)
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result())
-SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14)
-SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5)
-SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12)
-SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15)
-SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15)
-SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12)
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
-SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
-SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
-SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
-SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
-SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
-SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result())
-SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result())
-SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3)
-SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10)
-SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True)
-SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True)
-model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20)
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15)
-LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2)
-AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2)
-Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")])
-Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0)
-Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0)
-Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
-Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("COMPOUND", "Compound_1_1_2")])
-model.do()
-model.end()
-
-from GeomAPI import GeomAPI_Shape
-
-model.testNbResults(Split_1, 1)
-model.testNbSubResults(Split_1, [6])
-model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [6])
-model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [52])
-model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [226])
-model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [452])
-model.testResultsVolumes(Split_1, [6283.185307194357847038190811872])

diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_1.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_1.py
new file mode 100644 (file)
index 0000000..baecd5c
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_1.py
@@ -0,0 +1,96 @@
+# Copyright (C) 2014-2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20)
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2)
+LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2)
+LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0)
+LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0)
+LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255)
+LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0)
+SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5)
+SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5)
+SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_5 = SketchProjection_1.createdFeature()
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5)
+SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12)
+SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15)
+SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15)
+SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20)
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15)
+LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2)
+AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")])
+Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0)
+Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0)
+Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
+Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("COMPOUND", "Compound_1_1_2")])
+
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Split_1, 1)
+model.testNbSubResults(Split_1, [6])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [6])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [52])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [226])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [452])
+model.testResultsVolumes(Split_1, [6283.185307194357847038190811872])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_2.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_2.py
new file mode 100644 (file)
index 0000000..e481566
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v0_2.py
@@ -0,0 +1,121 @@
+# Copyright (C) 2014-2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 10)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 10)
+SketchCircle_2 = Sketch_1.addCircle(10, 0, 10)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_2.center())
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1])
+SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_2.center(), 10)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 20, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchCircle_3 = Sketch_2.addCircle(0, -7, 10)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.result(), SketchCircle_3.center())
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_3.results()[1], 10)
+SketchConstraintDistanceVertical_1 = Sketch_2.setVerticalDistance(SketchCircle_3.center(), SketchAPI_Line(SketchLine_2).startPoint(), 7)
+SketchCircle_4 = Sketch_2.addCircle(40, -27, 10)
+SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_4.results()[1], SketchCircle_3.results()[1])
+SketchConstraintDistanceHorizontal_2 = Sketch_2.setHorizontalDistance(SketchCircle_3.center(), SketchCircle_4.center(), 40)
+SketchConstraintDistanceVertical_2 = Sketch_2.setVerticalDistance(SketchCircle_4.center(), SketchCircle_3.center(), 20)
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 20, 0)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPSOLID", "Extrusion_1_1")])
+Compound_2.result().subResult(0).setColor(255, 170, 0)
+Compound_2.result().subResult(0).subResult(0).setColor(255, 170, 0)
+Compound_2.result().subResult(0).subResult(1).setColor(255, 170, 0)
+Compound_2.result().subResult(1).setColor(0, 85, 255)
+Compound_2.result().subResult(1).subResult(0).setColor(0, 85, 255)
+Compound_2.result().subResult(1).subResult(1).setColor(0, 85, 255)
+Compound_2.result().subResult(1).subResult(2).setColor(0, 85, 255)
+Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_3 = Sketch_3.addLine(7, 0, -7, 0)
+SketchLine_4 = Sketch_3.addLine(-7, 0, -7, 5)
+SketchLine_5 = Sketch_3.addLine(-7, 5, 7, 5)
+SketchLine_6 = Sketch_3.addLine(7, 5, 7, 0)
+SketchConstraintCoincidence_4 = Sketch_3.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_3.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_6 = Sketch_3.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_7 = Sketch_3.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintHorizontal_1 = Sketch_3.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_3.setVertical(SketchLine_4.result())
+SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_6.result())
+SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_7 = SketchProjection_3.createdFeature()
+SketchConstraintDistance_1 = Sketch_3.setDistance(SketchLine_5.endPoint(), SketchLine_7.result(), 7, True)
+SketchConstraintMiddle_1 = Sketch_3.setMiddlePoint(SketchAPI_Line(SketchLine_7).startPoint(), SketchLine_3.result())
+SketchConstraintLength_1 = Sketch_3.setLength(SketchLine_4.result(), 5)
+SketchLine_8 = Sketch_3.addLine(7, 7, -7.000000000000001, 7)
+SketchLine_9 = Sketch_3.addLine(-7.000000000000001, 7, -7.000000000000001, 10)
+SketchLine_10 = Sketch_3.addLine(-7.000000000000001, 10, 7, 10)
+SketchLine_11 = Sketch_3.addLine(7, 10, 7, 7)
+SketchConstraintCoincidence_8 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_9 = Sketch_3.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_9.result())
+SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_10.result())
+SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result())
+SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchLine_4.result())
+SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_8.startPoint(), SketchLine_6.result())
+SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_9.result(), 3)
+SketchConstraintDistance_2 = Sketch_3.setDistance(SketchLine_9.startPoint(), SketchLine_5.result(), 2, True)
+model.do()
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r")], model.selection(), 50, -10)
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r")], model.selection(), 60, 20)
+AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2)
+Compound_3 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")])
+Compound_3.result().subResult(0).setColor(0, 170, 0)
+Compound_3.result().subResult(1).setColor(0, 255, 0)
+Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0)
+Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("COMPOUND", "Compound_3_1_2")])
+
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Split_1, 2)
+model.testNbSubResults(Split_1, [5, 7])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [5, 7])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [37, 56])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [148, 250])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [296, 500])
+model.testResultsVolumes(Split_1, [6283.185307174889203452, 10109.63121762967239192])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_1.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_1.py
new file mode 100644 (file)
index 0000000..68c0cff
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_1.py
@@ -0,0 +1,96 @@
+# Copyright (C) 2014-2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20)
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2)
+LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2)
+LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0)
+LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0)
+LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255)
+LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0)
+SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5)
+SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5)
+SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_5 = SketchProjection_1.createdFeature()
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5)
+SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12)
+SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15)
+SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15)
+SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20)
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15)
+LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2)
+AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")])
+Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0)
+Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0)
+Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
+Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("COMPOUND", "Compound_1_1_2")], 20190506)
+
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Split_1, 1)
+model.testNbSubResults(Split_1, [4])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [11])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [73])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [292])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [584])
+model.testResultsVolumes(Split_1, [36332.7412287331171683])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_2.py b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_2.py
new file mode 100644 (file)
index 0000000..bee85a5
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanSplit_MultiLevelCompound_v20190506_2.py
@@ -0,0 +1,121 @@
+# Copyright (C) 2014-2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 10)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 10)
+SketchCircle_2 = Sketch_1.addCircle(10, 0, 10)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchCircle_2.center())
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1])
+SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchCircle_2.center(), 10)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 20, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchCircle_3 = Sketch_2.addCircle(0, -7, 10)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.result(), SketchCircle_3.center())
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_3.results()[1], 10)
+SketchConstraintDistanceVertical_1 = Sketch_2.setVerticalDistance(SketchCircle_3.center(), SketchAPI_Line(SketchLine_2).startPoint(), 7)
+SketchCircle_4 = Sketch_2.addCircle(40, -27, 10)
+SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_4.results()[1], SketchCircle_3.results()[1])
+SketchConstraintDistanceHorizontal_2 = Sketch_2.setHorizontalDistance(SketchCircle_3.center(), SketchCircle_4.center(), 40)
+SketchConstraintDistanceVertical_2 = Sketch_2.setVerticalDistance(SketchCircle_4.center(), SketchCircle_3.center(), 20)
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 20, 0)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPSOLID", "Extrusion_1_1")])
+Compound_2.result().subResult(0).setColor(255, 170, 0)
+Compound_2.result().subResult(0).subResult(0).setColor(255, 170, 0)
+Compound_2.result().subResult(0).subResult(1).setColor(255, 170, 0)
+Compound_2.result().subResult(1).setColor(0, 85, 255)
+Compound_2.result().subResult(1).subResult(0).setColor(0, 85, 255)
+Compound_2.result().subResult(1).subResult(1).setColor(0, 85, 255)
+Compound_2.result().subResult(1).subResult(2).setColor(0, 85, 255)
+Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_3 = Sketch_3.addLine(7, 0, -7, 0)
+SketchLine_4 = Sketch_3.addLine(-7, 0, -7, 5)
+SketchLine_5 = Sketch_3.addLine(-7, 5, 7, 5)
+SketchLine_6 = Sketch_3.addLine(7, 5, 7, 0)
+SketchConstraintCoincidence_4 = Sketch_3.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_3.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_6 = Sketch_3.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_7 = Sketch_3.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintHorizontal_1 = Sketch_3.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_3.setVertical(SketchLine_4.result())
+SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_6.result())
+SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_7 = SketchProjection_3.createdFeature()
+SketchConstraintDistance_1 = Sketch_3.setDistance(SketchLine_5.endPoint(), SketchLine_7.result(), 7, True)
+SketchConstraintMiddle_1 = Sketch_3.setMiddlePoint(SketchAPI_Line(SketchLine_7).startPoint(), SketchLine_3.result())
+SketchConstraintLength_1 = Sketch_3.setLength(SketchLine_4.result(), 5)
+SketchLine_8 = Sketch_3.addLine(7, 7, -7.000000000000001, 7)
+SketchLine_9 = Sketch_3.addLine(-7.000000000000001, 7, -7.000000000000001, 10)
+SketchLine_10 = Sketch_3.addLine(-7.000000000000001, 10, 7, 10)
+SketchLine_11 = Sketch_3.addLine(7, 10, 7, 7)
+SketchConstraintCoincidence_8 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_9 = Sketch_3.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_9.result())
+SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_10.result())
+SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result())
+SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchLine_4.result())
+SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_8.startPoint(), SketchLine_6.result())
+SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_9.result(), 3)
+SketchConstraintDistance_2 = Sketch_3.setDistance(SketchLine_9.startPoint(), SketchLine_5.result(), 2, True)
+model.do()
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r")], model.selection(), 50, -10)
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r")], model.selection(), 60, 20)
+AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2)
+Compound_3 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")])
+Compound_3.result().subResult(0).setColor(0, 170, 0)
+Compound_3.result().subResult(1).setColor(0, 255, 0)
+Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0)
+Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("COMPOUND", "Compound_3_1_2")], 20190506)
+
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Split_1, 1)
+model.testNbSubResults(Split_1, [4])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [14])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [102])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [428])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [856])
+model.testResultsVolumes(Split_1, [25476.0018319841583434])
+
+assert(model.checkPythonDump())