return found;
}
+//================================================================================
+/*!
+ * \brief Provide human readable text by error code reported by ghs3d
+ */
+//================================================================================
+
+static TCollection_AsciiString translateError(const TCollection_AsciiString& errorLine)
+{
+ int beg = errorLine.Location("ERR ", 1, errorLine.Length());
+ if ( !beg ) return errorLine;
+
+ TCollection_AsciiString errCodeStr = errorLine.SubString( beg + 4 , errorLine.Length());
+ if ( !errCodeStr.IsIntegerValue() )
+ return errorLine;
+ Standard_Integer errCode = errCodeStr.IntegerValue();
+
+ int codeEnd = beg + 7;
+ while ( codeEnd < errorLine.Length() && isdigit( errorLine.Value(codeEnd+1) ))
+ codeEnd++;
+ TCollection_AsciiString error = errorLine.SubString( beg, codeEnd ) + ": ";
+
+ switch ( errCode ) {
+ case 0:
+ return "The surface mesh includes a face of type type other than edge, "
+ "triangle or quadrilateral. This face type is not supported.";
+ case 1:
+ return error + "Not enough memory for the face table";
+ case 2:
+ return error + "Not enough memory";
+ case 3:
+ return error + "Not enough memory";
+ case 4:
+ return error + "Face is ignored";
+ case 5:
+ return error + errorLine.SubString( beg + 5, errorLine.Length()) +
+ ": End of file. Some data are missing in the file.";
+ case 6:
+ return error + errorLine.SubString( beg + 5, errorLine.Length()) +
+ ": Read error on the file. There are wrong data in the file.";
+ case 7:
+ return error + "the metric file is inadequate (dimension other than 3).";
+ case 8:
+ return error + "the metric file is inadequate (values not per vertices).";
+ case 9:
+ return error + "the metric file contains more than one field.";
+ case 10:
+ return error + "the number of values in the \".bb\" (metric file) is incompatible with the expected"
+ "value of number of mesh vertices in the \".noboite\" file.";
+ case 12:
+ return error + "Too many sub-domains";
+ case 13:
+ return error + "the number of vertices is negative or null.";
+ case 14:
+ return error + "the number of faces is negative or null.";
+ case 15:
+ return error + "A facehas a null vertex.";
+ case 22:
+ return error + "incompatible data";
+ case 131:
+ return error + "the number of vertices is negative or null.";
+ case 132:
+ return error + "the number of vertices is negative or null (in the \".mesh\" file).";
+ case 133:
+ return error + "the number of faces is negative or null.";
+ case 1000:
+ return error + "A face appears more than once in the input surface mesh.";
+ case 1001:
+ return error + "An edge appears more than once in the input surface mesh.";
+ case 1002:
+ return error + "A face has a vertex negative or null.";
+ case 1003:
+ return error + "NOT ENOUGH MEMORY";
+ case 2000:
+ return error + "Not enough available memory.";
+ case 2002:
+ return error + "Some initial points cannot be inserted. The surface mesh is probably very bad "
+ "in terms of quality or the input list of points is wrong";
+ case 2003:
+ return error + "Some vertices are too close to one another or coincident.";
+ case 2004:
+ return error + "Some vertices are too close to one another or coincident.";
+ case 2012:
+ return error + "A vertex cannot be inserted.";
+ case 2014:
+ return error + "There are at least two points considered as coincident";
+ case 2103:
+ return error + "Some vertices are too close to one another or coincident";
+ case 3000:
+ return error + "The surface mesh regeneration step has failed";
+ case 3009:
+ return error + "Constrained edge cannot be enforced";
+ case 3019:
+ return error + "Constrained face cannot be enforced";
+ case 3029:
+ return error + "Missing faces";
+ case 3100:
+ return error + "No guess to start the definition of the connected component(s)";
+ case 3101:
+ return error + "The surface mesh includes at least one hole. The domain is not well defined";
+ case 3102:
+ return error + "Impossible to define a component";
+ case 3103:
+ return error + "The surface edge intersects another surface edge";
+ case 3104:
+ return error + "The surface edge intersects the surface face";
+ case 3105:
+ return error + "One boundary point lies within a surface face";
+ case 3106:
+ return error + "One surface edge intersects a surface face";
+ case 3107:
+ return error + "One boundary point lies within a surface edge";
+ case 3108:
+ return error + "Insufficient memory ressources detected due to a bad quality surface mesh leading "
+ "to too many swaps";
+ case 3109:
+ return error + "Edge is unique (i.e., bounds a hole in the surface)";
+ case 3122:
+ return error + "Presumably, the surface mesh is not compatible with the domain being processed";
+ case 3123:
+ return error + "Too many components, too many sub-domain";
+ case 3209:
+ return error + "The surface mesh includes at least one hole. "
+ "Therefore there is no domain properly defined";
+ case 3300:
+ return error + "Statistics.";
+ case 3400:
+ return error + "Statistics.";
+ case 3500:
+ return error + "Warning, it is dramatically tedious to enforce the boundary items";
+ case 4000:
+ return error + "Not enough memory at this time, nevertheless, the program continues. "
+ "The expected mesh will be correct but not really as large as required";
+ case 4002:
+ return error + "see above error code, resulting quality may be poor.";
+ case 4003:
+ return error + "Not enough memory at this time, nevertheless, the program continues (warning)";
+ case 8000:
+ return error + "Unknown face type.";
+ case 8005:
+ case 8006:
+ return error + errorLine.SubString( beg + 5, errorLine.Length()) +
+ ": End of file. Some data are missing in the file.";
+ case 9000:
+ return error + "A too small volume element is detected";
+ case 9001:
+ return error + "There exists at least a null or negative volume element";
+ case 9002:
+ return error + "There exist null or negative volume elements";
+ case 9003:
+ return error + "A too small volume element is detected. A face is considered being degenerated";
+ case 9100:
+ return error + "Some element is suspected to be very bad shaped or wrong";
+ case 9102:
+ return error + "A too bad quality face is detected. This face is considered degenerated";
+ case 9112:
+ return error + "A too bad quality face is detected. This face is degenerated";
+ case 9122:
+ return error + "Presumably, the surface mesh is not compatible with the domain being processed";
+ case 9999:
+ return error + "Abnormal error occured, contact hotline";
+ case 23600:
+ return error + "Not enough memory for the face table";
+ case 23601:
+ return error + "The algorithm cannot run further. "
+ "The surface mesh is probably very bad in terms of quality.";
+ case 23602:
+ return error + "Bad vertex number";
+ }
+ return errorLine;
+}
+
//=============================================================================
/*!
*Here we are going to use the GHS3D mesher
findLineContaing( " ERR ",aLogFileName,foundLine))
{
foundLine.LeftAdjust();
- comment << foundLine;
+ comment << translateError( foundLine );
}
else if ( findLineContaing( "%% NO SAVING OPERATION",aLogFileName,foundLine))
{
if ( comment.empty() )
comment << "See " << aLogFileName << " for problem description";
else
- comment << "See " << aLogFileName << " for more information";
+ comment << "\nSee " << aLogFileName << " for more information";
error(COMPERR_ALGO_FAILED, comment);
}
else
findLineContaing( " ERR ",aLogFileName,foundLine))
{
foundLine.LeftAdjust();
- comment << foundLine;
+ comment << translateError( foundLine );
}
else if ( findLineContaing( "%% NO SAVING OPERATION",aLogFileName,foundLine))
{
if ( comment.empty() )
comment << "See " << aLogFileName << " for problem description";
else
- comment << "See " << aLogFileName << " for more information";
+ comment << "\nSee " << aLogFileName << " for more information";
error(COMPERR_ALGO_FAILED, comment);
}
else {
